* Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue @ 2016-06-29 19:24 Daniel Kriesten 2016-06-29 19:47 ` Burton, Ross 0 siblings, 1 reply; 7+ messages in thread From: Daniel Kriesten @ 2016-06-29 19:24 UTC (permalink / raw) To: openembedded-core Dear List, Building a Yocto BSP fails with ERROR: QA Issue: Architecture did not match (…) on work/i586-poky-linux/perl/5.22.1-r0/packages… My build host is running a 64-bit Arch Linux*. I downgraded to gcc-multilibs-5.3.0, the rest of the system is up-to-date. I tried several traget architectures (i586, i.MX6) as well as different BSPs. But they all fail with the perl QA Issue. Unfortunately, I don’t get a answer out of google. Thus, I hope someone here can lend me a hand? *I know, it’s not perfect. But I do not have an other machine at hand, yet. -- Daniel Kriesten daniel@die-kriestens.de http://www.die-kriestens.de ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue 2016-06-29 19:24 Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue Daniel Kriesten @ 2016-06-29 19:47 ` Burton, Ross 2016-06-30 6:03 ` Daniel Kriesten 0 siblings, 1 reply; 7+ messages in thread From: Burton, Ross @ 2016-06-29 19:47 UTC (permalink / raw) To: Daniel Kriesten; +Cc: OE-core [-- Attachment #1: Type: text/plain, Size: 275 bytes --] On 29 June 2016 at 20:24, Daniel Kriesten <embedded@die-kriestens.de> wrote: > ERROR: QA Issue: Architecture did not match (…) on > work/i586-poky-linux/perl/5.22.1-r0/packages… > Can you fill in the ... so we're not guessing what the error actually is? Ross [-- Attachment #2: Type: text/html, Size: 718 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue 2016-06-29 19:47 ` Burton, Ross @ 2016-06-30 6:03 ` Daniel Kriesten 2016-06-30 16:56 ` Burton, Ross 0 siblings, 1 reply; 7+ messages in thread From: Daniel Kriesten @ 2016-06-30 6:03 UTC (permalink / raw) To: OE-core Sorry. I thought it’s more like a RTFM-answer. So here is the error message. Oh - well. Thanks for bringing me thus far. while reproducing the error, I see a difference as well. Here is the from ssl-community. It complains about uudmap. When building for i586, the message was a different one. Reproducing that one will take some hours. ---------- >8 ---------- WARNING: Host distribution "Arch-rolling" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution. Loading cache: 100% |##################################################################################| ETA: 00:00:00 Loaded 2197 entries from dependency cache. NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.30.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "universal" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "imx6q-elo" DISTRO = "poky" DISTRO_VERSION = "2.1" TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard cortexa9" TARGET_FPU = "hard" meta meta-poky = "HEAD:4376fb851791a1fb514873ad239d516dd7159341" meta-oe meta-multimedia = "HEAD:247b1267bbe95719cd4877d2d3cfbaf2a2f4865a" meta-fsl-arm = "HEAD:3f34509381092a893b8efe4451018b8d67a5abf6" meta-fsl-arm-extra = "HEAD:698cf389aa446244a39b597fbf58be1d55096500" meta-fsl-demos = "HEAD:7e4237db1f48cbbde776b17a66d71def14e3809e" NOTE: Preparing RunQueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: perl-5.22.1-r0 do_package: objcopy failed with exit code 256 (cmd was 'arm-poky-linux-gnueabi-objcopy' --only-keep-debug '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap' '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/.debug/generate_uudmap'): arm-poky-linux-gnueabi-objcopy:/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap: File format not recognized ERROR: perl-5.22.1-r0 do_package: Function failed: split_and_strip_files ERROR: Logfile of failure stored in: /home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/temp/log.do_package.31441 ERROR: Task 1126 (/home/krid/Develop/Yocto/fsl-community-bsp/sources/poky/meta/recipes-devtools/perl/perl_5.22.1.bb, do_package) failed with exit code '1' NOTE: Tasks Summary: Attempted 1436 tasks of which 1414 didn't need to be rerun and 1 failed. Waiting for 0 running tasks to finish: Summary: 1 task failed: /home/krid/Develop/Yocto/fsl-community-bsp/sources/poky/meta/recipes-devtools/perl/perl_5.22.1.bb, do_package Summary: There was 1 WARNING message shown. Summary: There were 2 ERROR messages shown, returning a non-zero exit code. ---------- 8< ---------- > Am 29.06.2016 um 21:47 schrieb Burton, Ross <ross.burton@intel.com>: > > > On 29 June 2016 at 20:24, Daniel Kriesten <embedded@die-kriestens.de> wrote: > ERROR: QA Issue: Architecture did not match (…) on work/i586-poky-linux/perl/5.22.1-r0/packages… > > Can you fill in the ... so we're not guessing what the error actually is? > > Ross -- Daniel Kriesten daniel@die-kriestens.de http://www.die-kriestens.de ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue 2016-06-30 6:03 ` Daniel Kriesten @ 2016-06-30 16:56 ` Burton, Ross 2016-07-01 5:49 ` Daniel Kriesten 0 siblings, 1 reply; 7+ messages in thread From: Burton, Ross @ 2016-06-30 16:56 UTC (permalink / raw) To: Daniel Kriesten; +Cc: OE-core [-- Attachment #1: Type: text/plain, Size: 1025 bytes --] On 30 June 2016 at 07:03, Daniel Kriesten <embedded@die-kriestens.de> wrote: > ERROR: perl-5.22.1-r0 do_package: objcopy failed with exit code 256 (cmd > was 'arm-poky-linux-gnueabi-objcopy' --only-keep-debug > '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap' > '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/.debug/generate_uudmap'): > arm-poky-linux-gnueabi-objcopy:/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap: > File format not recognized > Can you run file on the binary that objdump is complaining about? (/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap) Ross [-- Attachment #2: Type: text/html, Size: 1510 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue 2016-06-30 16:56 ` Burton, Ross @ 2016-07-01 5:49 ` Daniel Kriesten 2016-07-01 8:16 ` Daniel Kriesten 0 siblings, 1 reply; 7+ messages in thread From: Daniel Kriesten @ 2016-07-01 5:49 UTC (permalink / raw) To: Burton, Ross; +Cc: OE-core > Am 30.06.2016 um 18:56 schrieb Burton, Ross <ross.burton@intel.com>: > > > On 30 June 2016 at 07:03, Daniel Kriesten <embedded@die-kriestens.de> wrote: > ERROR: perl-5.22.1-r0 do_package: objcopy failed with exit code 256 (cmd was 'arm-poky-linux-gnueabi-objcopy' --only-keep-debug '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap' '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/.debug/generate_uudmap'): > arm-poky-linux-gnueabi-objcopy:/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap: File format not recognized > > Can you run file on the binary that objdump is complaining about? > (/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap) $ file /home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap /home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=48ab21d6bc4545ce1c9b695001a5179192c40d9a, not stripped So this one is build for the host, not the target … With kind regards Daniel -- Daniel Kriesten daniel@die-kriestens.de http://www.die-kriestens.de ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue 2016-07-01 5:49 ` Daniel Kriesten @ 2016-07-01 8:16 ` Daniel Kriesten 2016-07-01 14:51 ` Khem Raj 0 siblings, 1 reply; 7+ messages in thread From: Daniel Kriesten @ 2016-07-01 8:16 UTC (permalink / raw) To: Burton, Ross; +Cc: OE-core Hi Ross, I found the time to do the x86qemu build with jethro, which gives the QA Issue. ---------- >8 ---------- jethro u= $ bitbake core-image-base WARNING: Host distribution "Arch-rolling" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution. Parsing recipes: 100% |#######################################################################################################################################################################################################| Time: 00:01:22 Parsing of 899 .bb files complete (0 cached, 899 parsed). 1330 targets, 38 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.28.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Arch-rolling" TARGET_SYS = "i586-poky-linux" MACHINE = "qemux86" DISTRO = "poky" DISTRO_VERSION = "2.0.2" TUNE_FEATURES = "m32 i586" TARGET_FPU = "" meta meta-yocto meta-yocto-bsp = "jethro:118380bc5d01e52b5edc574abb4176f6e70a54a6" NOTE: Preparing RunQueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks WARNING: Failed to fetch URL http://downloads.sourceforge.net/linux-diag/sysfsutils-2.1.0.tar.gz, attempting MIRRORS if available WARNING: QA Issue: Symlink /usr/lib/perl/ptest/hostperl in perl-ptest points to TMPDIR [symlink-to-sysroot] ERROR: QA Issue: Architecture did not match (3 to 62) on work/i586-poky-linux/perl/5.22.0-r0/packages-split/perl-ptest/usr/lib/perl/ptest/.debug/generate_uudmap [arch] WARNING: QA Issue: /usr/lib/perl/ptest/generate@underscore@uudmap_perl-ptest contained in package perl-ptest requires libc.so.6()(64bit), but no providers found in its RDEPENDS [file-rdeps] ERROR: QA run found fatal errors. Please consider fixing them. ERROR: Function failed: do_package_qa ERROR: Logfile of failure stored in: /home/krid/Develop/Yocto/TUC-L4IVA-Yocto/meta-layers/poky/build-qemux86/tmp/work/i586-poky-linux/perl/5.22.0-r0/temp/log.do_package_qa.13360 ERROR: Task 1146 (/home/krid/Develop/Yocto/TUC-L4IVA-Yocto/meta-layers/poky/meta/recipes-devtools/perl/perl_5.22.0.bb, do_package_qa) failed with exit code '1' NOTE: Tasks Summary: Attempted 3181 tasks of which 12 didn't need to be rerun and 1 failed. Waiting for 0 running tasks to finish: Summary: 1 task failed: /home/krid/Develop/Yocto/TUC-L4IVA-Yocto/meta-layers/poky/meta/recipes-devtools/perl/perl_5.22.0.bb, do_package_qa Summary: There were 4 WARNING messages shown. Summary: There were 3 ERROR messages shown, returning a non-zero exit code. ---------- 8< ---------- Here is what file says: jethro u= $ file tmp/work/i586-poky-linux/perl/5.22.0-r0/packages-split/perl-ptest/usr/lib/perl/ptest/.debug/generate_uudmap tmp/work/i586-poky-linux/perl/5.22.0-r0/packages-split/perl-ptest/usr/lib/perl/ptest/.debug/generate_uudmap: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter *empty*, for GNU/Linux 2.6.32, BuildID[sha1]=48ab21d6bc4545ce1c9b695001a5179192c40d9a, not stripped As Arch Linux is currently based on gcc-6.1 (64bit only), I had to change that to gcc-multilib (32 and 64 bit). Furthermore, for jethro and krogoth, I had to downgrade gcc to 5.3. I could use latest master of poky and see, if that works. I don’t know, if it is worth a try. Regards Daniel > Am 01.07.2016 um 07:49 schrieb Daniel Kriesten <embedded@die-kriestens.de>: > >> Am 30.06.2016 um 18:56 schrieb Burton, Ross <ross.burton@intel.com>: >> >> >> On 30 June 2016 at 07:03, Daniel Kriesten <embedded@die-kriestens.de> wrote: >> ERROR: perl-5.22.1-r0 do_package: objcopy failed with exit code 256 (cmd was 'arm-poky-linux-gnueabi-objcopy' --only-keep-debug '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap' '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/.debug/generate_uudmap'): >> arm-poky-linux-gnueabi-objcopy:/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap: File format not recognized >> >> Can you run file on the binary that objdump is complaining about? >> (/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap) > > $ file /home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap > /home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=48ab21d6bc4545ce1c9b695001a5179192c40d9a, not stripped > > So this one is build for the host, not the target … > > With kind regards > Daniel -- Daniel Kriesten daniel@die-kriestens.de http://www.die-kriestens.de ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue 2016-07-01 8:16 ` Daniel Kriesten @ 2016-07-01 14:51 ` Khem Raj 0 siblings, 0 replies; 7+ messages in thread From: Khem Raj @ 2016-07-01 14:51 UTC (permalink / raw) To: Daniel Kriesten; +Cc: OE-core keep in mind that using gcc6 based build hosts may not work for OE older than master On Fri, Jul 1, 2016 at 1:16 AM, Daniel Kriesten <embedded@die-kriestens.de> wrote: > Hi Ross, > > I found the time to do the x86qemu build with jethro, which gives the QA Issue. > > ---------- >8 ---------- > jethro u= $ bitbake core-image-base > WARNING: Host distribution "Arch-rolling" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution. > Parsing recipes: 100% |#######################################################################################################################################################################################################| Time: 00:01:22 > Parsing of 899 .bb files complete (0 cached, 899 parsed). 1330 targets, 38 skipped, 0 masked, 0 errors. > NOTE: Resolving any missing task queue dependencies > > Build Configuration: > BB_VERSION = "1.28.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Arch-rolling" > TARGET_SYS = "i586-poky-linux" > MACHINE = "qemux86" > DISTRO = "poky" > DISTRO_VERSION = "2.0.2" > TUNE_FEATURES = "m32 i586" > TARGET_FPU = "" > meta > meta-yocto > meta-yocto-bsp = "jethro:118380bc5d01e52b5edc574abb4176f6e70a54a6" > > NOTE: Preparing RunQueue > NOTE: Executing SetScene Tasks > NOTE: Executing RunQueue Tasks > WARNING: Failed to fetch URL http://downloads.sourceforge.net/linux-diag/sysfsutils-2.1.0.tar.gz, attempting MIRRORS if available > WARNING: QA Issue: Symlink /usr/lib/perl/ptest/hostperl in perl-ptest points to TMPDIR [symlink-to-sysroot] > ERROR: QA Issue: Architecture did not match (3 to 62) on work/i586-poky-linux/perl/5.22.0-r0/packages-split/perl-ptest/usr/lib/perl/ptest/.debug/generate_uudmap [arch] > WARNING: QA Issue: /usr/lib/perl/ptest/generate@underscore@uudmap_perl-ptest contained in package perl-ptest requires libc.so.6()(64bit), but no providers found in its RDEPENDS [file-rdeps] > ERROR: QA run found fatal errors. Please consider fixing them. > ERROR: Function failed: do_package_qa > ERROR: Logfile of failure stored in: /home/krid/Develop/Yocto/TUC-L4IVA-Yocto/meta-layers/poky/build-qemux86/tmp/work/i586-poky-linux/perl/5.22.0-r0/temp/log.do_package_qa.13360 > ERROR: Task 1146 (/home/krid/Develop/Yocto/TUC-L4IVA-Yocto/meta-layers/poky/meta/recipes-devtools/perl/perl_5.22.0.bb, do_package_qa) failed with exit code '1' > NOTE: Tasks Summary: Attempted 3181 tasks of which 12 didn't need to be rerun and 1 failed. > Waiting for 0 running tasks to finish: > > Summary: 1 task failed: > /home/krid/Develop/Yocto/TUC-L4IVA-Yocto/meta-layers/poky/meta/recipes-devtools/perl/perl_5.22.0.bb, do_package_qa > Summary: There were 4 WARNING messages shown. > Summary: There were 3 ERROR messages shown, returning a non-zero exit code. > ---------- 8< ---------- > > Here is what file says: > jethro u= $ file tmp/work/i586-poky-linux/perl/5.22.0-r0/packages-split/perl-ptest/usr/lib/perl/ptest/.debug/generate_uudmap > tmp/work/i586-poky-linux/perl/5.22.0-r0/packages-split/perl-ptest/usr/lib/perl/ptest/.debug/generate_uudmap: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter *empty*, for GNU/Linux 2.6.32, BuildID[sha1]=48ab21d6bc4545ce1c9b695001a5179192c40d9a, not stripped > > As Arch Linux is currently based on gcc-6.1 (64bit only), I had to change that to gcc-multilib (32 and 64 bit). Furthermore, for jethro and krogoth, I had to downgrade gcc to 5.3. I could use latest master of poky and see, if that works. I don’t know, if it is worth a try. > > Regards > Daniel > >> Am 01.07.2016 um 07:49 schrieb Daniel Kriesten <embedded@die-kriestens.de>: >> >>> Am 30.06.2016 um 18:56 schrieb Burton, Ross <ross.burton@intel.com>: >>> >>> >>> On 30 June 2016 at 07:03, Daniel Kriesten <embedded@die-kriestens.de> wrote: >>> ERROR: perl-5.22.1-r0 do_package: objcopy failed with exit code 256 (cmd was 'arm-poky-linux-gnueabi-objcopy' --only-keep-debug '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap' '/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/.debug/generate_uudmap'): >>> arm-poky-linux-gnueabi-objcopy:/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap: File format not recognized >>> >>> Can you run file on the binary that objdump is complaining about? >>> (/home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap) >> >> $ file /home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap >> /home/krid/Develop/Yocto/fsl-community-bsp/build-imx6q-elo/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/perl/5.22.1-r0/package/usr/lib/perl/ptest/generate_uudmap: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=48ab21d6bc4545ce1c9b695001a5179192c40d9a, not stripped >> >> So this one is build for the host, not the target … >> >> With kind regards >> Daniel > > > -- > Daniel Kriesten > daniel@die-kriestens.de > http://www.die-kriestens.de > > > -- > _______________________________________________ > Openembedded-core mailing list > Openembedded-core@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-core ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-07-01 14:52 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-06-29 19:24 Building Perl-5.22.1-r0 on Arch Linux fails with QA Issue Daniel Kriesten 2016-06-29 19:47 ` Burton, Ross 2016-06-30 6:03 ` Daniel Kriesten 2016-06-30 16:56 ` Burton, Ross 2016-07-01 5:49 ` Daniel Kriesten 2016-07-01 8:16 ` Daniel Kriesten 2016-07-01 14:51 ` Khem Raj
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.