* [PATCH][v4, 2/3] bootstream: Add falconwing bootloader definition
@ 2010-09-11 15:45 Sean Cross
0 siblings, 0 replies; only message in thread
From: Sean Cross @ 2010-09-11 15:45 UTC (permalink / raw)
To: Openembedded-devel
This adds the "bootstream" recipe, which can be used to boot i.MX233 chips. It specifically adds the chumby falconwing bootstream recipe.
---
recipes/bootstream/bootstream-falconwing_1.bb | 65 ++++
recipes/bootstream/fix-oe-build.patch | 405 +++++++++++++++++++++++++
2 files changed, 470 insertions(+), 0 deletions(-)
create mode 100644 recipes/bootstream/bootstream-chumby-falconwing_1.bb
create mode 100644 recipes/bootstream/fix-oe-build.patch
diff --git a/recipes/bootstream/bootstream-chumby-falconwing_1.bb b/recipes/bootstream/bootstream-chumby-falconwing_1.bb
new file mode 100644
index 0000000..c154963
--- /dev/null
+++ b/recipes/bootstream/bootstream-chumby-falconwing_1.bb
@@ -0,0 +1,65 @@
+# Builds the boot partition for a chumby Falconwing-based platform.
+# Note that bootstream-chumby.bin is a binary-blob combination of
+# chumby_stub, and the Freescale-provided bootlets that set up power,
+# clocks, and RAM. It is provided as a blob because Freescale provides
+# elftosb2 as a blob. If you would like to recreate these from scratch and
+# are on an x86 Linux machine, you'll need the following files:
+# http://files.chumby.com/source/falconwing/bootloader/elftosb2;name=elftosb2
+# http://files.chumby.com/source/falconwing/bootloader/falconwing_chumby_sb.db;name=chumbyconfig
+# http://files.chumby.com/source/falconwing/bootloader/falconwing_factory_sb.db;name=factoryconfig
+SECTION = "bootloaders"
+PRIORITY = "optional"
+LICENSE = "GPLv2"
+DEPENDS = "virtual/kernel"
+PROVIDES = "virtual/bootloader"
+RPROVIDES = "virtual/bootloader"
+PR = "r4"
+
+SRC_URI = "http://files.chumby.com/source/falconwing/build2913/bootstream-1.0.tgz;name=archive \
+ http://files.chumby.com/source/falconwing/build2913/bootstream-chumby.bin;name=bootstream \
+ file://fix-oe-build.patch \
+"
+SRC_URI[archive.md5sum] = "de87fbc40f0466d5f3d3f083537f9559"
+SRC_URI[archive.sha256sum] = "532101f5721eb9540fcac37bf6feb79449c4d5d66dbb7331dd1d3560c68abad9"
+SRC_URI[bootstream.md5sum] = "8aa29fc431f349b22d147b5cec52927b"
+SRC_URI[bootstream.sha256sum] = "8dcf12cb6f749de2e373a780b8bbcee099ec23aad212d58131750caa7360c0eb"
+
+S = "${WORKDIR}/bootstream-1.0"
+
+do_compile () {
+ oe_runmake 'LINUX_DIR=${STAGING_KERNEL_DIR}'
+}
+
+FILES_${PN} = "/boot"
+
+addtask deploy before do_build after do_compile
+
+do_deploy () {
+ ./config_util --cmd=create \
+ --mbr=/dev/zero \
+ --configname=falconwing \
+ --build_ver=1000 --force --pad \
+ --blockdef=${S}/output/chumby_boot.rom,215040,boot,1,0,0,0 \
+ --blockdef=${S}/images/4_1.bin,153600,img1,1,0,0,0 \
+ --blockdef=${S}/images/4_2.bin,153600,img2,1,0,0,0 \
+ --blockdef=${S}/images/5_1.bin,153600,img3,1,0,0,0 \
+ --blockdef=${S}/images/5_2.bin,153600,img4,1,0,0,0 \
+ --blockdef=${S}/images/5_3.bin,153600,img5,1,0,0,0 \
+ --blockdef=${DEPLOY_DIR_IMAGE}/zImage-${MACHINE}.bin,4194304,krnA,1,0,0,0 \
+ --blockdef=${DEPLOY_DIR_IMAGE}/zImage-${MACHINE}.bin,4194304,krnB,1,0,0,0 \
+ > ${S}/output/config_block.bin
+ install -d ${DEPLOY_DIR_IMAGE}
+ rm -f ${DEPLOY_DIR_IMAGE}/boot.bin
+ touch ${DEPLOY_DIR_IMAGE}/boot.bin
+ dd if=../bootstream-chumby.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=0 count=64
+ dd if=${S}/output/config_block.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=96 count=32
+ dd if=${S}/output/chumby_boot.rom of=${DEPLOY_DIR_IMAGE}/boot.bin seek=128 count=420
+ dd if=${S}/images/4_1.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=548 count=300
+ dd if=${S}/images/4_2.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=848 count=300
+ dd if=${S}/images/5_1.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=1148 count=300
+ dd if=${S}/images/5_2.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=1448 count=300
+ dd if=${S}/images/5_3.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=1748 count=300
+ dd if=${DEPLOY_DIR_IMAGE}/zImage-${MACHINE}.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=2048 count=8192
+ dd if=${DEPLOY_DIR_IMAGE}/zImage-${MACHINE}.bin of=${DEPLOY_DIR_IMAGE}/boot.bin seek=10240 count=8192
+ package_stagefile_shell ${DEPLOY_DIR_IMAGE}/boot.bin
+}
diff --git a/recipes/bootstream/fix-oe-build.patch b/recipes/bootstream/fix-oe-build.patch
new file mode 100644
index 0000000..c06756d
--- /dev/null
+++ b/recipes/bootstream/fix-oe-build.patch
@@ -0,0 +1,405 @@
+diff -ur bootstream-1.0-stock/Makefile bootstream-1.0/Makefile
+--- bootstream-1.0-stock/Makefile 2010-08-18 13:43:44.386637400 -0700
++++ bootstream-1.0/Makefile 2010-08-18 13:43:27.870626729 -0700
+@@ -1,64 +1,16 @@
+ # $Id: Makefile 7554 2009-04-30 19:44:17Z scross $
+ # source build makefile for bootstream bootloader
+
+-include ../config/config.mk
++CFLAGS += -DCHUMBY_CONFIGNAME=\"falconwing\" -DCHUMBY_CONFIGNAME_falconwing
+
+-ELFTOSB2_DIR=elftosb2
+-ELFTOSB2_BINARIES=elftosb2
+-ELFTOSB2_SRC_BINARIES=$(addprefix $(ELFTOSB2_DIR)/,$(ELFTOSB2_BINARIES))
+-ELFTOSB2_SOURCES=$(wildcard $(ELFTOSB2_DIR)/*.c $(ELFTOSB2_DIR)/*.h)
+-
+-SRC_BINARIES=$(ELFTOSB2_SRC_BINARIES)
+-HOST_BINARIES=$(ELFTOSB2_BINARIES)
+-
+-CFLAGS += -DCHUMBY_CONFIGNAME=\"$(CONFIGNAME)\" -DCHUMBY_CONFIGNAME_$(CONFIGNAME)
+-
+-all: $(SRC_BINARIES) $(HOST_BINARIES) \
+- chumby_factory/chumby_factory chumby_stub/chumby_stub chumby_boot/chumby_boot
+-
+-
+-install: $(SRC_BINARIES) $(HOST_BINARIES) \
+- .src_binaries .chumby-boot .factory-image .chumby-stub
+- #.u-boot-image
+-
+-chumby_boot/chumby_boot:
+- $(MAKE) -C chumby_boot CROSS_COMPILE=$(TARGET)- LINUX_DIR=$(LINUX_DIR)
+-
+-chumby_stub/chumby_stub:
+- $(MAKE) -C chumby_stub CROSS_COMPILE=$(TARGET)- LINUX_DIR=$(LINUX_DIR)
+-
+-chumby_factory/chumby_factory:
+- $(MAKE) -C chumby_factory CROSS_COMPILE=$(TARGET)- LINUX_DIR=$(LINUX_DIR)
+-
+-
+-.factory-image: $(SRC_BINARIES)
+- elftosb2/elftosb2 -z -c ../config/falconwing_factory_sb.db \
+- -o $(INSTALL_DIR)/bootstream-factory.bin
+-
+-.chumby-boot: $(SRC_BINARIES)
+- cp images/chumby_boot.rom $(INSTALL_DIR)/chumby_boot.bin
+-
+-.chumby-stub: $(SRC_BINARIES)
+- elftosb2/elftosb2 -c ../config/falconwing_chumby_sb.db \
+- -o $(INSTALL_DIR)/bootstream-chumby.bin
+-
+-.u-boot-image: $(SRC_BINARIES)
+- elftosb2/elftosb2 -c ../config/falconwing_uboot_sb.db \
+- -o $(INSTALL_DIR)/falconwing_uboot.sb
+-
+-
+-.src_binaries:
+- @echo "Copying src bianries"
+- mkdir -p $(INSTALL_DIR)/host
+- cp --preserve --no-dereference $(SRC_BINARIES) $(INSTALL_DIR)/host/
++all:
++ $(MAKE) -C chumby_factory
++ $(MAKE) -C chumby_stub
++ $(MAKE) -C chumby_boot
++ gcc config_util.cpp -o config_util -lstdc++
+
+ clean:
+- -rm -f $(HOST_BINARIES) $(SRC_BINARIES)
+- $(MAKE) -C $(ELFTOSB2_DIR) clean
+-
+-$(ELFTOSB2_SRC_BINARIES):
+- $(MAKE) -C $(ELFTOSB2_DIR)
+-
+-../output/$(TARGET)-$(CNPLATFORM):
+- @echo "Creating directory: $@"
+- -mkdir -p $@
++ $(MAKE) -C chumby_factory clean
++ $(MAKE) -C chumby_stub clean
++ $(MAKE) -C chumby_boot clean
++ rm -f config_util
+diff -ur bootstream-1.0-stock/chumby_boot/Makefile bootstream-1.0/chumby_boot/Makefile
+--- bootstream-1.0-stock/chumby_boot/Makefile 2010-08-18 13:43:44.386637400 -0700
++++ bootstream-1.0/chumby_boot/Makefile 2010-08-18 13:43:27.874670886 -0700
+@@ -7,24 +7,14 @@
+ # Linker script
+ BASE_ADDR ?= 0x00002000
+ BOOT_LAYOUT_IN = $(SRCDIR)/chumby_boot.ld.in
+-BOOT_LAYOUT_OUT = $(OUTPUTDIR)/chumby_boot.ld
++BOOT_LAYOUT_OUT = ../output/chumby_boot.ld
+
+
+ # Output ELF image
+-CHUMBY_BOOT = $(OUTPUTDIR)/../../images/chumby_boot
++CHUMBY_BOOT = ../output/chumby_boot
+
+ # Output binary image
+-CHUMBY_BOOT_ROM = $(OUTPUTDIR)/../../images/chumby_boot.rom
+-
+-CROSS_COMPILE ?= arm-linux-
+-
+-AS = $(CROSS_COMPILE)as
+-CC = $(CROSS_COMPILE)gcc
+-LD = $(CROSS_COMPILE)ld
+-CPP = $(CROSS_COMPILE)cpp
+-STRIP = $(CROSS_COMPILE)strip
+-OBJCOPY = $(CROSS_COMPILE)objcopy
+-OBJDUMP = $(CROSS_COMPILE)objdump
++CHUMBY_BOOT_ROM = ../output/chumby_boot.rom
+
+ LIBGCCDIR = $(dir $(shell $(CC) -print-libgcc-file-name))
+ CFLAGS = -Wall -I$(INCLUDEDIR) -I$(LINUX_DIR)/include -fno-builtin -O0 -nostdinc
+@@ -91,5 +81,5 @@
+ @nm -n $@ > $@.map
+
+ $(BOOT_LAYOUT_OUT): $(BOOT_LAYOUT_IN)
+- $(CPP) -P -DBASE_ADDR=$(BASE_ADDR) -o $@ $<
++ cpp -P -DBASE_ADDR=$(BASE_ADDR) -o $@ $<
+
+diff -ur bootstream-1.0-stock/chumby_boot/src/serial.c bootstream-1.0/chumby_boot/src/serial.c
+--- bootstream-1.0-stock/chumby_boot/src/serial.c 2010-08-18 13:43:44.386637400 -0700
++++ bootstream-1.0/chumby_boot/src/serial.c 2010-08-18 13:43:27.874670886 -0700
+@@ -171,10 +171,10 @@
+ return data;
+ }
+
+-static char hex[] = "0123456789abcdef";
+
+ void serial_puthex(u32 c) {
+ int i;
++ char hex[] = "0123456789abcdef";
+ serial_puts("0x");
+ for(i=7; i>=0; i--)
+ serial_putc(hex[(c>>(4*i))&0x0f]);
+diff -ur bootstream-1.0-stock/chumby_boot/src/shell.c bootstream-1.0/chumby_boot/src/shell.c
+--- bootstream-1.0-stock/chumby_boot/src/shell.c 2010-08-18 13:43:44.386637400 -0700
++++ bootstream-1.0/chumby_boot/src/shell.c 2010-08-18 15:12:45.138607841 -0700
+@@ -48,8 +48,8 @@
+ "shell\n"
+
+ // Run the watchdogtimer, set to reboot the device in 20 seconds.
+- "regutil -w HW_RTC_WATCHDOG 0x00004e20\n"
+- "regutil -w HW_RTC_CTRL_SET 0x00000010\n"
++ //"regutil -w HW_RTC_WATCHDOG 0x00004e20\n"
++ //"regutil -w HW_RTC_CTRL_SET 0x00000010\n"
+
+ // Prioritize screen DMA over other DMA. This fixes video tearing issues.
+ // Priority is: AXI0, AHB2, AHB1, AHB3
+@@ -84,7 +84,7 @@
+
+ // Set up the Linux tags, pass the command-line arguments, and run the
+ // Linux kernel, located at address 0x40008000.
+- "linux 0x40008000 \"console=ttyAM0,115200 init=/linuxrc root=/dev/mmcblk0p2 rootfstype=ext3 ro rootwait chumbyrev=** ssp1=mmc sysrq_always_enabled logo.brand=" BRAND_PLACEHOLDER "\"\n",
++ "linux 0x40008000 \"console=ttyAM0,115200 root=/dev/mmcblk0p2 rw rootwait chumbyrev=** ssp1=mmc sysrq_always_enabled logo.brand=" BRAND_PLACEHOLDER "\"\n",
+
+ ////////////////////////////////////////////////
+
+@@ -97,7 +97,7 @@
+
+ // Set up the Linux tags, pass the command-line arguments, and run the
+ // Linux kernel, located at address 0x40008000.
+- "linux 0x40008000 \"console=ttyAM0,115200 init=/linuxrc root=/dev/mmcblk0p2 rootfstype=ext3 ro rootwait chumbyrev=** ssp1=mmc sysrq_always_enabled partition=recovery logo.brand=" BRAND_PLACEHOLDER "\"\n",
++ "linux 0x40008000 \"console=ttyAM0,115200 root=/dev/mmcblk0p2 rw rootwait chumbyrev=** ssp1=mmc sysrq_always_enabled partition=recovery logo.brand=" BRAND_PLACEHOLDER "\"\n",
+
+ ////////////////////////////////////////////////
+
+@@ -350,8 +350,8 @@
+ }
+
+ char **shell_line_to_argv(int argc, char *line) {
+- static char *argv[80];
+ int i;
++ static char *argv[10];
+ for(i=0; i<=argc; i++) {
+ argv[i] = line;
+ while(*line)
+diff -ur bootstream-1.0-stock/chumby_boot/src/shell_funcs.c bootstream-1.0/chumby_boot/src/shell_funcs.c
+--- bootstream-1.0-stock/chumby_boot/src/shell_funcs.c 2010-08-18 13:43:44.386637400 -0700
++++ bootstream-1.0/chumby_boot/src/shell_funcs.c 2010-08-18 15:11:45.984011892 -0700
+@@ -42,6 +42,7 @@
+
+ value = eeprom_read(addr, reg);
+ STR("Value: "), HEX(value), STR("\n");
++ return 0;
+ }
+
+
+@@ -244,7 +245,7 @@
+
+
+
+-static int sd_initted = 0;
++int sd_initted;
+ char *sd_pmem;
+
+ static int my_sd_stop() {
+@@ -256,27 +257,28 @@
+
+
+ static int my_sd_init() {
+- static rom_BootInit_t init;// = (rom_BootInit_t *)0x40A10000;
++ rom_BootInit_t init;
++
+ if(sd_initted) {
+ int result;
+ result = my_sd_stop();
+ if(result) {
+- STR("Error! Couldn't reset SD.\n");
+- return 0;
++ STR("Error! Couldn't reset SD: "), HEX(result), STR("\n");
++ return 1;
+ }
++ sd_initted = 0;
+ }
++
+ if(!sd_initted) {
+ int result;
+ mdelay(10);
+ init.size = PMEM_SIZE;
+- init.pMem = sd_pmem; // Allocated on stack in main().
++ init.pMem = 16384;
+ init.mode = 9; // Set to SSP_PORT_1.
+ memset(sd_pmem, 0, PMEM_SIZE);
+- result = sd_init(&init);
+- if(!result)
+- sd_initted = 1;
+- else
++ if((result = sd_init(&init)))
+ return result;
++ sd_initted = 1;
+ }
+ return 0;
+ }
+@@ -318,17 +320,18 @@
+ while(bytes > 0) {
+ int chunks_to_read, chunk;
+ int read_tries = 0;
++ chunks_to_read = bytes/sizeof(chunk_t);
+
+
+ // Perform the read.
+-// STR("Going to try to read "), INT(chunks_to_read), STR(" chunks\n");
++// STR("Going to try to read "), INT(chunks_to_read), STR(" chunks\n");
+ while(read_tries < 1000) {
+ read_tries++;
+ chunks_to_read = bytes/sizeof(chunk_t);
+ chunks = sd_next(&chunks_to_read);
+ if(!chunks_to_read) {
+-// STR("Read 0 chunks. Trying again...\n");
+-// mdelay(1000*read_tries); // XXX need to tune this!
++ STR("Read 0 chunks. Trying again...\n");
++ mdelay(10*read_tries); // XXX need to tune this!
+ continue;
+ }
+ else
+@@ -339,15 +342,15 @@
+ STR(" Aborting read.\n");
+ return 0;
+ }
+-// else if(read_tries)
+-// STR("Delayed "), INT(read_tries), STR(" times.\n");
++// else if(read_tries)
++// STR("Delayed "), INT(read_tries), STR(" times.\n");
+
+ if(chunks_to_read < 0) {
+ STR("Error while reading bytes: "), HEX(chunks_to_read), STR("\n");
+ return 0;
+ }
+-// else
+-// STR("Successfully read "), INT(chunks_to_read), STR(" chunks.\n");
++// else
++// STR("Successfully read "), INT(chunks_to_read), STR(" chunks.\n");
+
+ // Copy over each of the chunks that was read.
+ for(chunk=0; chunk<chunks_to_read; chunk++) {
+@@ -367,9 +370,13 @@
+ int sd_cfg_loaded = 0;
+ static int config_block_load() {
+ if(!sd_cfg_loaded) {
+- sd_cfg = (char *)0x45A00000;
+- if(real_load(CFG_OFFSET, (char *)sd_cfg, sizeof(struct config_area)))
+- return 0;
++ sd_cfg = (struct config_area *)0x45A00000;
++ if(real_load(CFG_OFFSET, (char *)sd_cfg, sizeof(struct config_area))) {
++ STR("real_load() returned an error.\n");
++ return 1;
++ }
++ //STR("Dump of config area:\n");
++ //HEXDUMP((unsigned char *)sd_cfg, sizeof(struct config_area));
+ sd_cfg_loaded = 1;
+ }
+ return !sd_cfg_loaded;
+@@ -773,14 +780,14 @@
+ return 0;
+ }
+
+-static char hex[] = "0123456789abcdef";
+
+ // str must be at least 11 bytes long
+ void str_puthex(u32 c, char *str) {
+- int i, j;
++ int i, j;
++ char hex[] = "0123456789abcdef";
+ str[0] = '0'; str[1] = 'x';
+ for(i=7, j = 0; i>=0; i--, j++)
+- str[2+j] = hex[(c>>(4*i))&0x0f];
++ str[2+j] = hex[(c>>(4*i))&0x0f];
+
+ str[10] = '\n';
+ str[11] = '\0';
+@@ -1058,6 +1065,7 @@
+
+ struct shell_command *shell_funcs_init() {
+ struct shell_command *cmd_fixup = cmds;
++ sd_initted = 0;
+
+ // Fixup the cmd array by adding the base_address value to each pointer.
+ while(cmd_fixup->name) {
+diff -ur bootstream-1.0-stock/chumby_factory/Makefile bootstream-1.0/chumby_factory/Makefile
+--- bootstream-1.0-stock/chumby_factory/Makefile 2010-08-18 13:43:44.386637400 -0700
++++ bootstream-1.0/chumby_factory/Makefile 2010-08-18 13:43:27.874670886 -0700
+@@ -1,30 +1,20 @@
+ CURRENTDIR = .
+ SRCDIR = $(CURRENTDIR)/src
+-OUTPUTDIR = $(CURRENTDIR)/output
++OUTPUTDIR = ../output
+
+ INCLUDEDIR = $(CURRENTDIR)/include
+
+ # Linker script
+ BASE_ADDR ?= 0x00002000
+ BOOT_LAYOUT_IN = $(SRCDIR)/chumby_factory.ld.in
+-BOOT_LAYOUT_OUT = $(OUTPUTDIR)/chumby_factory.ld
++BOOT_LAYOUT_OUT = ../output/chumby_factory.ld
+
+
+ # Output ELF image
+-CHUMBY_FACTORY = $(OUTPUTDIR)/../../images/chumby_factory
++CHUMBY_FACTORY = ../output/chumby_factory
+
+ # Output binary image
+-CHUMBY_FACTORY_ROM = $(OUTPUTDIR)/../../images/chumby_factory.rom
+-
+-CROSS_COMPILE ?= arm-linux-
+-
+-AS = $(CROSS_COMPILE)as
+-CC = $(CROSS_COMPILE)gcc
+-LD = $(CROSS_COMPILE)ld
+-CPP = $(CROSS_COMPILE)cpp
+-STRIP = $(CROSS_COMPILE)strip
+-OBJCOPY = $(CROSS_COMPILE)objcopy
+-OBJDUMP = $(CROSS_COMPILE)objdump
++CHUMBY_FACTORY_ROM = ../output/chumby_factory.rom
+
+ LIBGCCDIR = $(dir $(shell $(CC) -print-libgcc-file-name))
+ CFLAGS = -Wall -I$(INCLUDEDIR) -I$(LINUX_DIR)/include -nostdinc -fno-builtin -O
+@@ -90,5 +80,5 @@
+ @nm -n $@ > $@.map
+
+ $(BOOT_LAYOUT_OUT): $(BOOT_LAYOUT_IN)
+- $(CPP) -P -DBASE_ADDR=$(BASE_ADDR) -o $@ $<
++ cpp -P -DBASE_ADDR=$(BASE_ADDR) -o $@ $<
+
+diff -ur bootstream-1.0-stock/chumby_stub/Makefile bootstream-1.0/chumby_stub/Makefile
+--- bootstream-1.0-stock/chumby_stub/Makefile 2010-08-18 13:43:44.386637400 -0700
++++ bootstream-1.0/chumby_stub/Makefile 2010-08-18 13:43:27.874670886 -0700
+@@ -1,30 +1,20 @@
+ CURRENTDIR = .
+ SRCDIR = $(CURRENTDIR)/src
+-OUTPUTDIR = $(CURRENTDIR)/output
++OUTPUTDIR = ../output
+
+ INCLUDEDIR = $(CURRENTDIR)/include
+
+ # Linker script
+ BASE_ADDR ?= 0x00002000
+ BOOT_LAYOUT_IN = $(SRCDIR)/chumby_stub.ld.in
+-BOOT_LAYOUT_OUT = $(OUTPUTDIR)/chumby_stub.ld
++BOOT_LAYOUT_OUT = ../output/chumby_stub.ld
+
+
+ # Output ELF image
+-CHUMBY_STUB = $(OUTPUTDIR)/../../images/chumby_stub
++CHUMBY_STUB = ../images/chumby_stub
+
+ # Output binary image
+-CHUMBY_STUB_ROM = $(OUTPUTDIR)/../../images/chumby_stub.rom
+-
+-CROSS_COMPILE ?= arm-linux-
+-
+-AS = $(CROSS_COMPILE)as
+-CC = $(CROSS_COMPILE)gcc
+-LD = $(CROSS_COMPILE)ld
+-CPP = $(CROSS_COMPILE)cpp
+-STRIP = $(CROSS_COMPILE)strip
+-OBJCOPY = $(CROSS_COMPILE)objcopy
+-OBJDUMP = $(CROSS_COMPILE)objdump
++CHUMBY_STUB_ROM = ../images/chumby_stub.rom
+
+ LIBGCCDIR = $(dir $(shell $(CC) -print-libgcc-file-name))
+ CFLAGS = -Wall -I$(INCLUDEDIR) -I$(LINUX_DIR)/include -nostdinc -fno-builtin -Os
+@@ -90,5 +80,5 @@
+ @nm -n $@ > $@.map
+
+ $(BOOT_LAYOUT_OUT): $(BOOT_LAYOUT_IN)
+- $(CPP) -P -DBASE_ADDR=$(BASE_ADDR) -o $@ $<
++ cpp -P -DBASE_ADDR=$(BASE_ADDR) -o $@ $<
+
--
1.7.0.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2010-09-11 15:46 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-11 15:45 [PATCH][v4, 2/3] bootstream: Add falconwing bootloader definition Sean Cross
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.