RE: [PATCH 1/3] dt-bindings: mfd: atmel,flexcom: Convert to json-schema

[<Kavyasree.Kotagiri@microchip.com>]

> > > Convert the Atmel flexcom device tree bindings to json schema.
> > >
> > > Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> > > ---
> > >  .../bindings/mfd/atmel,flexcom.yaml           | 97 +++++++++++++++++++
> > >  .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------
> > >  2 files changed, 97 insertions(+), 63 deletions(-)
> > >  create mode 100644
> > Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-
> > flexcom.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> > b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> > > new file mode 100644
> > > index 000000000000..221bd840b49e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> > > @@ -0,0 +1,97 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Device tree bindings for Atmel Flexcom (Flexible Serial
> > Communication Unit)
> >
> > There was a v2 of the same patch to which already commented. Now you
> > send the same patch, without comments applied as v1. This does not make
> > any sense.
> >
> > Please version your patches correctly and do not ignore received feedback.
> >
> 
> Hi,
> 
> FYI, lan966x flexcom chip-select driver support is moved to atmel-flexcom.c
> rather than
> implementing a new mux driver. So, I sent new version now with driver
> changes in drives/mfd/atmel-flexcom.c
> I once again gone through your v2 comments. I missed this comment
> "s/Device tree bindings//".
> Except that I addressed remaining all other comments for dt-bindings
> patches.
> >
Hi,

Please let me know what you mean by " s/Device tree bindings//" comment?

Thanks,
Kavya
> > Best regards,
> > Krzysztof