* [PATCH v8 0/2] IMX GPCv2 drivers for wakeup source and suspend
@ 2015-07-31 21:33 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-07-31 21:33 UTC (permalink / raw)
To: shawn.guo, tglx, jason; +Cc: linux-arm-kernel, linux-kernel, b20788
IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.
Two drivers were developed to support these functions:
One irqchip driver (irq-imx-gpcv2.c) is to manage
the interrupt wakeup source. One suspend driver (pm-imx7.c) is used
to manage the system power states.
Patch v8:
Rename the structure "imx-gpcv2-irq" to "gpcv2_irqchip_data", and
move it into irq-imx-gpcv2.c.
Deleted the "gpcv2.h" header file, and moved 3 function declarations
into common.h.
Changed the compile switch for suspend-imx7.S and pm-imx7.c
to CONFIG_SOC_IMX7D.
Added the register and bit mask definitions.
Added some error handling codes.
Unified coding style and code clean up.
Patch v7:
Move most of the macros and definitions into relating source files
Replace the spinlock_t with the struct raw_spinlock in imx_gpcv2_irq
Code clean up
Patch V6:
Clean up the codes (irq-imx-gpcv2.c) according to the review
feedback of Thomas Glx
Use raw_spin_lock in the irq_mask and irq_unmask callbacks
Split the struct definition into two: irqchip and suspend
Unified coding style
Patch V5:
Splitted it into two patches per Thomas Gleixner suggestion.
-- one for irqchip
-- one for suspend
Patch V4:
Splitted the driver into two function drivers: one irqchip driver
for wakeup source management, and one suspend driver for power
state management.
Patch V3:
Added the assemble codes (suspend-imx7.S) for SUSPEND_MEM state.
Supported the SUSPEND_MEM power mode.
Patch V2:
Added the basic driver APIs for power management.
Supported the STANDBY power mode.
Patch V1:
Implemented the driver for IRQ wakeup sources.
Shenwei Wang (2):
irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
ARM: imx: support suspend states on imx7D
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/Makefile | 2 +
arch/arm/mach-imx/common.h | 4 +
arch/arm/mach-imx/pm-imx7.c | 917 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
drivers/irqchip/Kconfig | 7 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-imx-gpcv2.c | 273 ++++++++++++
8 files changed, 1734 insertions(+)
create mode 100644 arch/arm/mach-imx/pm-imx7.c
create mode 100644 arch/arm/mach-imx/suspend-imx7.S
create mode 100644 drivers/irqchip/irq-imx-gpcv2.c
--
2.5.0.rc2
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 0/2] IMX GPCv2 drivers for wakeup source and suspend
@ 2015-07-31 21:33 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-07-31 21:33 UTC (permalink / raw)
To: linux-arm-kernel
IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.
Two drivers were developed to support these functions:
One irqchip driver (irq-imx-gpcv2.c) is to manage
the interrupt wakeup source. One suspend driver (pm-imx7.c) is used
to manage the system power states.
Patch v8:
Rename the structure "imx-gpcv2-irq" to "gpcv2_irqchip_data", and
move it into irq-imx-gpcv2.c.
Deleted the "gpcv2.h" header file, and moved 3 function declarations
into common.h.
Changed the compile switch for suspend-imx7.S and pm-imx7.c
to CONFIG_SOC_IMX7D.
Added the register and bit mask definitions.
Added some error handling codes.
Unified coding style and code clean up.
Patch v7:
Move most of the macros and definitions into relating source files
Replace the spinlock_t with the struct raw_spinlock in imx_gpcv2_irq
Code clean up
Patch V6:
Clean up the codes (irq-imx-gpcv2.c) according to the review
feedback of Thomas Glx
Use raw_spin_lock in the irq_mask and irq_unmask callbacks
Split the struct definition into two: irqchip and suspend
Unified coding style
Patch V5:
Splitted it into two patches per Thomas Gleixner suggestion.
-- one for irqchip
-- one for suspend
Patch V4:
Splitted the driver into two function drivers: one irqchip driver
for wakeup source management, and one suspend driver for power
state management.
Patch V3:
Added the assemble codes (suspend-imx7.S) for SUSPEND_MEM state.
Supported the SUSPEND_MEM power mode.
Patch V2:
Added the basic driver APIs for power management.
Supported the STANDBY power mode.
Patch V1:
Implemented the driver for IRQ wakeup sources.
Shenwei Wang (2):
irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
ARM: imx: support suspend states on imx7D
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/Makefile | 2 +
arch/arm/mach-imx/common.h | 4 +
arch/arm/mach-imx/pm-imx7.c | 917 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
drivers/irqchip/Kconfig | 7 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-imx-gpcv2.c | 273 ++++++++++++
8 files changed, 1734 insertions(+)
create mode 100644 arch/arm/mach-imx/pm-imx7.c
create mode 100644 arch/arm/mach-imx/suspend-imx7.S
create mode 100644 drivers/irqchip/irq-imx-gpcv2.c
--
2.5.0.rc2
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
2015-07-31 21:33 ` Shenwei Wang
@ 2015-07-31 21:33 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-07-31 21:33 UTC (permalink / raw)
To: shawn.guo, tglx, jason; +Cc: linux-arm-kernel, linux-kernel, b20788
IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.
This patch adds a new irqchip driver to manage the interrupt wakeup
sources on IMX7D.
When the system is in WFI (wait for interrupt) mode, this GPC block
will be the first block on the platform to be activated and signaled.
Under normal wait mode during cpu idle, the system can be woke up
by any enabled interrupts. Under standby or suspend mode, the system
can only be woke up by the pre-defined wakeup sources.
Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
---
drivers/irqchip/Kconfig | 7 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-imx-gpcv2.c | 273 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 281 insertions(+)
create mode 100644 drivers/irqchip/irq-imx-gpcv2.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 120d815..3fc0fac 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -177,3 +177,10 @@ config RENESAS_H8300H_INTC
config RENESAS_H8S_INTC
bool
select IRQ_DOMAIN
+
+config IMX_GPCV2
+ bool
+ select IRQ_DOMAIN
+ help
+ Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b8d4e96..8eb5f60 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -52,3 +52,4 @@ obj-$(CONFIG_RENESAS_H8300H_INTC) += irq-renesas-h8300h.o
obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
+obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
diff --git a/drivers/irqchip/irq-imx-gpcv2.c b/drivers/irqchip/irq-imx-gpcv2.c
new file mode 100644
index 0000000..c2728b0
--- /dev/null
+++ b/drivers/irqchip/irq-imx-gpcv2.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/irqchip.h>
+#include <linux/syscore_ops.h>
+
+#define IMR_NUM 4
+#define GPC_MAX_IRQS (IMR_NUM * 32)
+
+#define GPC_IMR1_CORE0 0x30
+#define GPC_IMR1_CORE1 0x40
+
+struct gpcv2_irqchip_data {
+ struct raw_spinlock rlock;
+ void __iomem *gpc_base;
+ u32 wakeup_sources[IMR_NUM];
+ u32 enabled_irqs[IMR_NUM];
+ u32 cpu2wakeup;
+};
+
+static struct gpcv2_irqchip_data *imx_gpcv2_instance;
+
+u32 imx_gpcv2_get_wakeup_source(u32 **sources)
+{
+ if (!imx_gpcv2_instance)
+ return 0;
+
+ if (sources)
+ *sources = imx_gpcv2_instance->wakeup_sources;
+
+ return IMR_NUM;
+}
+
+static int gpcv2_wakeup_source_save(void)
+{
+ struct gpcv2_irqchip_data *cd;
+ void __iomem *reg;
+ int i;
+
+ cd = imx_gpcv2_instance;
+ if (!cd)
+ return 0;
+
+ for (i = 0; i < IMR_NUM; i++) {
+ reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
+ cd->enabled_irqs[i] = readl_relaxed(reg);
+ writel_relaxed(cd->wakeup_sources[i], reg);
+ }
+
+ return 0;
+}
+
+static void gpcv2_wakeup_source_restore(void)
+{
+ struct gpcv2_irqchip_data *cd;
+ void __iomem *reg;
+ int i;
+
+ cd = imx_gpcv2_instance;
+ if (!cd)
+ return;
+
+ for (i = 0; i < IMR_NUM; i++) {
+ reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
+ writel_relaxed(cd->enabled_irqs[i], reg);
+ cd->wakeup_sources[i] = ~0;
+ }
+}
+
+static struct syscore_ops imx_gpcv2_syscore_ops = {
+ .suspend = gpcv2_wakeup_source_save,
+ .resume = gpcv2_wakeup_source_restore,
+};
+
+static int imx_gpcv2_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct gpcv2_irqchip_data *cd = d->chip_data;
+ unsigned int idx = d->hwirq / 32;
+ unsigned long flags;
+ void __iomem *reg;
+ u32 mask, val;
+
+ raw_spin_lock_irqsave(&cd->rlock, flags);
+ reg = cd->gpc_base + cd->cpu2wakeup + idx * 4;
+ mask = 1 << d->hwirq % 32;
+ val = cd->wakeup_sources[idx];
+
+ cd->wakeup_sources[idx] = on ? (val & ~mask) : (val | mask);
+ raw_spin_unlock_irqrestore(&cd->rlock, flags);
+
+ /*
+ * Do *not* call into the parent, as the GIC doesn't have any
+ * wake-up facility...
+ */
+
+ return 0;
+}
+
+static void imx_gpcv2_irq_unmask(struct irq_data *d)
+{
+ struct gpcv2_irqchip_data *cd = d->chip_data;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock(&cd->rlock);
+ reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
+ val = readl_relaxed(reg);
+ val &= ~(1 << d->hwirq % 32);
+ writel_relaxed(val, reg);
+ raw_spin_unlock(&cd->rlock);
+
+ irq_chip_unmask_parent(d);
+}
+
+static void imx_gpcv2_irq_mask(struct irq_data *d)
+{
+ struct gpcv2_irqchip_data *cd = d->chip_data;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock(&cd->rlock);
+ reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
+ val = readl_relaxed(reg);
+ val |= 1 << (d->hwirq % 32);
+ writel_relaxed(val, reg);
+ raw_spin_unlock(&cd->rlock);
+
+ irq_chip_mask_parent(d);
+}
+
+static struct irq_chip gpcv2_irqchip_data_chip = {
+ .name = "GPCv2",
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_mask = imx_gpcv2_irq_mask,
+ .irq_unmask = imx_gpcv2_irq_unmask,
+ .irq_set_wake = imx_gpcv2_irq_set_wake,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+};
+
+static int imx_gpcv2_domain_xlate(struct irq_domain *domain,
+ struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ /* Shouldn't happen, really... */
+ if (domain->of_node != controller)
+ return -EINVAL;
+
+ /* Not GIC compliant */
+ if (intsize != 3)
+ return -EINVAL;
+
+ /* No PPI should point to this domain */
+ if (intspec[0] != 0)
+ return -EINVAL;
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2];
+ return 0;
+}
+
+static int imx_gpcv2_domain_alloc(struct irq_domain *domain,
+ unsigned int irq, unsigned int nr_irqs,
+ void *data)
+{
+ struct of_phandle_args *args = data;
+ struct of_phandle_args parent_args;
+ irq_hw_number_t hwirq;
+ int i;
+
+ /* Not GIC compliant */
+ if (args->args_count != 3)
+ return -EINVAL;
+
+ /* No PPI should point to this domain */
+ if (args->args[0] != 0)
+ return -EINVAL;
+
+ /* Can't deal with this */
+ hwirq = args->args[1];
+ if (hwirq >= GPC_MAX_IRQS)
+ return -EINVAL;
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
+ &gpcv2_irqchip_data_chip, domain->host_data);
+ }
+
+ parent_args = *args;
+ parent_args.np = domain->parent->of_node;
+ return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
+}
+
+static struct irq_domain_ops gpcv2_irqchip_data_domain_ops = {
+ .xlate = imx_gpcv2_domain_xlate,
+ .alloc = imx_gpcv2_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static int __init imx_gpcv2_irqchip_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *parent_domain, *domain;
+ struct gpcv2_irqchip_data *cd;
+ int i;
+
+ if (!parent) {
+ pr_err("%s: no parent, giving up\n", node->full_name);
+ return -ENODEV;
+ }
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("%s: unable to get parent domain\n", node->full_name);
+ return -ENXIO;
+ }
+
+ cd = kzalloc(sizeof(struct gpcv2_irqchip_data), GFP_KERNEL);
+ BUG_ON(!cd);
+
+ cd->gpc_base = of_iomap(node, 0);
+ if (!cd->gpc_base) {
+ pr_err("fsl-gpcv2: unable to map gpc registers\n");
+ kfree(cd);
+ return -ENOMEM;
+ }
+
+ domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
+ node, &gpcv2_irqchip_data_domain_ops, cd);
+ if (!domain) {
+ iounmap(cd->gpc_base);
+ kfree(cd);
+ return -ENOMEM;
+ }
+ irq_set_default_host(domain);
+
+ /* Initially mask all interrupts */
+ for (i = 0; i < IMR_NUM; i++) {
+ writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE0 + i * 4);
+ writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE1 + i * 4);
+ cd->wakeup_sources[i] = ~0;
+ }
+
+ /* Let CORE0 as the default CPU to wake up by GPC */
+ cd->cpu2wakeup = GPC_IMR1_CORE0;
+
+ /*
+ * Due to hardware design failure, need to make sure GPR
+ * interrupt(#32) is unmasked during RUN mode to avoid entering
+ * DSM by mistake.
+ */
+ writel_relaxed(~0x1, cd->gpc_base + cd->cpu2wakeup);
+
+ imx_gpcv2_instance = cd;
+ register_syscore_ops(&imx_gpcv2_syscore_ops);
+
+ return 0;
+}
+
+IRQCHIP_DECLARE(imx_gpcv2, "fsl,imx7d-gpc", imx_gpcv2_irqchip_init);
--
2.5.0.rc2
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
@ 2015-07-31 21:33 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-07-31 21:33 UTC (permalink / raw)
To: linux-arm-kernel
IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.
This patch adds a new irqchip driver to manage the interrupt wakeup
sources on IMX7D.
When the system is in WFI (wait for interrupt) mode, this GPC block
will be the first block on the platform to be activated and signaled.
Under normal wait mode during cpu idle, the system can be woke up
by any enabled interrupts. Under standby or suspend mode, the system
can only be woke up by the pre-defined wakeup sources.
Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
---
drivers/irqchip/Kconfig | 7 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-imx-gpcv2.c | 273 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 281 insertions(+)
create mode 100644 drivers/irqchip/irq-imx-gpcv2.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 120d815..3fc0fac 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -177,3 +177,10 @@ config RENESAS_H8300H_INTC
config RENESAS_H8S_INTC
bool
select IRQ_DOMAIN
+
+config IMX_GPCV2
+ bool
+ select IRQ_DOMAIN
+ help
+ Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b8d4e96..8eb5f60 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -52,3 +52,4 @@ obj-$(CONFIG_RENESAS_H8300H_INTC) += irq-renesas-h8300h.o
obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
+obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
diff --git a/drivers/irqchip/irq-imx-gpcv2.c b/drivers/irqchip/irq-imx-gpcv2.c
new file mode 100644
index 0000000..c2728b0
--- /dev/null
+++ b/drivers/irqchip/irq-imx-gpcv2.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/irqchip.h>
+#include <linux/syscore_ops.h>
+
+#define IMR_NUM 4
+#define GPC_MAX_IRQS (IMR_NUM * 32)
+
+#define GPC_IMR1_CORE0 0x30
+#define GPC_IMR1_CORE1 0x40
+
+struct gpcv2_irqchip_data {
+ struct raw_spinlock rlock;
+ void __iomem *gpc_base;
+ u32 wakeup_sources[IMR_NUM];
+ u32 enabled_irqs[IMR_NUM];
+ u32 cpu2wakeup;
+};
+
+static struct gpcv2_irqchip_data *imx_gpcv2_instance;
+
+u32 imx_gpcv2_get_wakeup_source(u32 **sources)
+{
+ if (!imx_gpcv2_instance)
+ return 0;
+
+ if (sources)
+ *sources = imx_gpcv2_instance->wakeup_sources;
+
+ return IMR_NUM;
+}
+
+static int gpcv2_wakeup_source_save(void)
+{
+ struct gpcv2_irqchip_data *cd;
+ void __iomem *reg;
+ int i;
+
+ cd = imx_gpcv2_instance;
+ if (!cd)
+ return 0;
+
+ for (i = 0; i < IMR_NUM; i++) {
+ reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
+ cd->enabled_irqs[i] = readl_relaxed(reg);
+ writel_relaxed(cd->wakeup_sources[i], reg);
+ }
+
+ return 0;
+}
+
+static void gpcv2_wakeup_source_restore(void)
+{
+ struct gpcv2_irqchip_data *cd;
+ void __iomem *reg;
+ int i;
+
+ cd = imx_gpcv2_instance;
+ if (!cd)
+ return;
+
+ for (i = 0; i < IMR_NUM; i++) {
+ reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
+ writel_relaxed(cd->enabled_irqs[i], reg);
+ cd->wakeup_sources[i] = ~0;
+ }
+}
+
+static struct syscore_ops imx_gpcv2_syscore_ops = {
+ .suspend = gpcv2_wakeup_source_save,
+ .resume = gpcv2_wakeup_source_restore,
+};
+
+static int imx_gpcv2_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct gpcv2_irqchip_data *cd = d->chip_data;
+ unsigned int idx = d->hwirq / 32;
+ unsigned long flags;
+ void __iomem *reg;
+ u32 mask, val;
+
+ raw_spin_lock_irqsave(&cd->rlock, flags);
+ reg = cd->gpc_base + cd->cpu2wakeup + idx * 4;
+ mask = 1 << d->hwirq % 32;
+ val = cd->wakeup_sources[idx];
+
+ cd->wakeup_sources[idx] = on ? (val & ~mask) : (val | mask);
+ raw_spin_unlock_irqrestore(&cd->rlock, flags);
+
+ /*
+ * Do *not* call into the parent, as the GIC doesn't have any
+ * wake-up facility...
+ */
+
+ return 0;
+}
+
+static void imx_gpcv2_irq_unmask(struct irq_data *d)
+{
+ struct gpcv2_irqchip_data *cd = d->chip_data;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock(&cd->rlock);
+ reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
+ val = readl_relaxed(reg);
+ val &= ~(1 << d->hwirq % 32);
+ writel_relaxed(val, reg);
+ raw_spin_unlock(&cd->rlock);
+
+ irq_chip_unmask_parent(d);
+}
+
+static void imx_gpcv2_irq_mask(struct irq_data *d)
+{
+ struct gpcv2_irqchip_data *cd = d->chip_data;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock(&cd->rlock);
+ reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
+ val = readl_relaxed(reg);
+ val |= 1 << (d->hwirq % 32);
+ writel_relaxed(val, reg);
+ raw_spin_unlock(&cd->rlock);
+
+ irq_chip_mask_parent(d);
+}
+
+static struct irq_chip gpcv2_irqchip_data_chip = {
+ .name = "GPCv2",
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_mask = imx_gpcv2_irq_mask,
+ .irq_unmask = imx_gpcv2_irq_unmask,
+ .irq_set_wake = imx_gpcv2_irq_set_wake,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+};
+
+static int imx_gpcv2_domain_xlate(struct irq_domain *domain,
+ struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ /* Shouldn't happen, really... */
+ if (domain->of_node != controller)
+ return -EINVAL;
+
+ /* Not GIC compliant */
+ if (intsize != 3)
+ return -EINVAL;
+
+ /* No PPI should point to this domain */
+ if (intspec[0] != 0)
+ return -EINVAL;
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2];
+ return 0;
+}
+
+static int imx_gpcv2_domain_alloc(struct irq_domain *domain,
+ unsigned int irq, unsigned int nr_irqs,
+ void *data)
+{
+ struct of_phandle_args *args = data;
+ struct of_phandle_args parent_args;
+ irq_hw_number_t hwirq;
+ int i;
+
+ /* Not GIC compliant */
+ if (args->args_count != 3)
+ return -EINVAL;
+
+ /* No PPI should point to this domain */
+ if (args->args[0] != 0)
+ return -EINVAL;
+
+ /* Can't deal with this */
+ hwirq = args->args[1];
+ if (hwirq >= GPC_MAX_IRQS)
+ return -EINVAL;
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
+ &gpcv2_irqchip_data_chip, domain->host_data);
+ }
+
+ parent_args = *args;
+ parent_args.np = domain->parent->of_node;
+ return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
+}
+
+static struct irq_domain_ops gpcv2_irqchip_data_domain_ops = {
+ .xlate = imx_gpcv2_domain_xlate,
+ .alloc = imx_gpcv2_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static int __init imx_gpcv2_irqchip_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *parent_domain, *domain;
+ struct gpcv2_irqchip_data *cd;
+ int i;
+
+ if (!parent) {
+ pr_err("%s: no parent, giving up\n", node->full_name);
+ return -ENODEV;
+ }
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("%s: unable to get parent domain\n", node->full_name);
+ return -ENXIO;
+ }
+
+ cd = kzalloc(sizeof(struct gpcv2_irqchip_data), GFP_KERNEL);
+ BUG_ON(!cd);
+
+ cd->gpc_base = of_iomap(node, 0);
+ if (!cd->gpc_base) {
+ pr_err("fsl-gpcv2: unable to map gpc registers\n");
+ kfree(cd);
+ return -ENOMEM;
+ }
+
+ domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
+ node, &gpcv2_irqchip_data_domain_ops, cd);
+ if (!domain) {
+ iounmap(cd->gpc_base);
+ kfree(cd);
+ return -ENOMEM;
+ }
+ irq_set_default_host(domain);
+
+ /* Initially mask all interrupts */
+ for (i = 0; i < IMR_NUM; i++) {
+ writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE0 + i * 4);
+ writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE1 + i * 4);
+ cd->wakeup_sources[i] = ~0;
+ }
+
+ /* Let CORE0 as the default CPU to wake up by GPC */
+ cd->cpu2wakeup = GPC_IMR1_CORE0;
+
+ /*
+ * Due to hardware design failure, need to make sure GPR
+ * interrupt(#32) is unmasked during RUN mode to avoid entering
+ * DSM by mistake.
+ */
+ writel_relaxed(~0x1, cd->gpc_base + cd->cpu2wakeup);
+
+ imx_gpcv2_instance = cd;
+ register_syscore_ops(&imx_gpcv2_syscore_ops);
+
+ return 0;
+}
+
+IRQCHIP_DECLARE(imx_gpcv2, "fsl,imx7d-gpc", imx_gpcv2_irqchip_init);
--
2.5.0.rc2
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-07-31 21:33 ` Shenwei Wang
@ 2015-07-31 21:33 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-07-31 21:33 UTC (permalink / raw)
To: shawn.guo, tglx, jason; +Cc: linux-arm-kernel, linux-kernel, b20788
IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.
GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4
domains. And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
After configuring the GPCv2 module, the platform can enter into a
selected mode either automatically triggered by ARM WFI instruction or
manually by software. The system will exit the low power states
by the predefined wakeup sources which are managed by the gpcv2
irqchip driver.
This patch adds a new suspend driver to manage the power states on IMX7D.
It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
---
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/Makefile | 2 +
arch/arm/mach-imx/common.h | 4 +
arch/arm/mach-imx/pm-imx7.c | 917 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
5 files changed, 1453 insertions(+)
create mode 100644 arch/arm/mach-imx/pm-imx7.c
create mode 100644 arch/arm/mach-imx/suspend-imx7.S
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8ceda28..54f8553 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -562,6 +562,7 @@ config SOC_IMX7D
select ARM_GIC
select HAVE_IMX_ANATOP
select HAVE_IMX_MMDC
+ select IMX_GPCV2
help
This enables support for Freescale i.MX7 Dual processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index fb689d8..60f13fd 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -88,6 +88,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
+AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SOC_IMX7D) += suspend-imx7.o pm-imx7.o
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 21e4e86..c5767f4 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -126,6 +126,10 @@ static const u32 imx53_suspend_sz;
static inline void imx6_suspend(void __iomem *ocram_vbase) {}
#endif
+void ca7_cpu_resume(void);
+void imx7_suspend(void __iomem *ocram_vbase);
+u32 imx_gpcv2_get_wakeup_source(u32 **sources);
+
void imx6_pm_ccm_init(const char *ccm_compat);
void imx6q_pm_init(void);
void imx6dl_pm_init(void);
diff --git a/arch/arm/mach-imx/pm-imx7.c b/arch/arm/mach-imx/pm-imx7.c
new file mode 100644
index 0000000..052c2cb
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx7.c
@@ -0,0 +1,917 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/suspend.h>
+#include <linux/slab.h>
+#include <asm/suspend.h>
+#include <asm/fncpy.h>
+
+#include "common.h"
+
+#define GPC_LPCR_A7_BSC 0x0
+#define GPC_LPCR_A7_AD 0x4
+#define GPC_LPCR_M4 0x8
+
+#define GPC_SLPCR 0x14
+#define GPC_PGC_ACK_SEL_A7 0x24
+
+#define GPC_SLOTx_CFG(x) (0xb0 + 4 * (x))
+
+#define GPC_PGC_CPU_MAPPING 0xec
+
+#define GPC_PGC_C0 0x800
+#define GPC_PGC_C1 0x840
+#define GPC_PGC_SCU 0x880
+#define GPC_PGC_SCU_TIMING 0x890
+#define GPC_PGC_FM 0xa00
+#define GPC_PGC_MIPI_PHY 0xc00
+#define GPC_PGC_PCIE_PHY 0xc40
+#define GPC_PGC_USB_OTG1_PHY 0xc80
+#define GPC_PGC_USB_OTG2_PHY 0xcc0
+#define GPC_PGC_USB_HSIC_PHY 0xd00
+
+#define ANADIG_ARM_PLL 0x60
+#define ANADIG_DDR_PLL 0x70
+#define ANADIG_SYS_PLL 0xb0
+#define ANADIG_ENET_PLL 0xe0
+#define ANADIG_AUDIO_PLL 0xf0
+#define ANADIG_VIDEO_PLL 0x130
+
+#define BM_LPCR_A7_AD_L2PGE (0x1 << 16)
+#define BM_LPCR_A7_AD_EN_C1_PUP (0x1 << 11)
+#define BM_LPCR_A7_AD_EN_C1_IRQ_PUP (0x1 << 10)
+#define BM_LPCR_A7_AD_EN_C0_PUP (0x1 << 9)
+#define BM_LPCR_A7_AD_EN_C0_IRQ_PUP (0x1 << 8)
+#define BM_LPCR_A7_AD_EN_PLAT_PDN (0x1 << 4)
+#define BM_LPCR_A7_AD_EN_C1_PDN (0x1 << 3)
+#define BM_LPCR_A7_AD_EN_C1_WFI_PDN (0x1 << 2)
+#define BM_LPCR_A7_AD_EN_C0_PDN (0x1 << 1)
+#define BM_LPCR_A7_AD_EN_C0_WFI_PDN (0x1)
+
+#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP (0x7 << 28)
+#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM (0x1 << 14)
+#define BM_LPCR_A7_BSC_LPM1 (0x3 << 2)
+#define BM_LPCR_A7_BSC_LPM0 (0x3)
+
+#define BM_LPCR_M4_MASK_DSM_TRIGGER (0x1 << 31)
+
+#define BM_SLPCR_EN_DSM (0x1 << 31)
+#define BM_SLPCR_RBC_EN (0x1 << 30)
+#define BM_SLPCR_VSTBY (0x1 << 2)
+#define BM_SLPCR_SBYOS (0x1 << 1)
+#define BM_SLPCR_BYPASS_PMIC_READY (0x1)
+
+#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP (0x1 << 31)
+#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN (0x1 << 15)
+
+#define BM_ANADIG_ARM_PLL_OVERRIDE (0x1 << 20)
+#define BM_ANADIG_DDR_PLL_OVERRIDE (0x1 << 19)
+#define BM_ANADIG_SYS_PLL_PFDx_OVERRIDE (0x1FF << 17)
+#define BM_ANADIG_ENET_PLL_OVERRIDE (0x1 << 13)
+#define BM_ANADIG_AUDIO_PLL_OVERRIDE (0x1 << 24)
+#define BM_ANADIG_VIDEO_PLL_OVERRIDE (0x1 << 24)
+
+#define A7_LPM_WAIT 0x5
+#define A7_LPM_STOP 0xa
+#define GPC_MAX_SLOT_NUMBER 10
+
+#define REG_SET 0x4
+#define REG_CLR 0x8
+
+#define MX7_MAX_DDRC_NUM 32
+#define MX7_MAX_DDRC_PHY_NUM 16
+
+#define READ_DATA_FROM_HARDWARE 0
+#define MX7_SUSPEND_OCRAM_SIZE 0x1000
+
+enum gpcv2_mode {
+ GPC_WAIT_CLOCKED,
+ GPC_WAIT_UNCLOCKED,
+ GPC_STOP_POWER_ON,
+ GPC_STOP_POWER_OFF,
+};
+
+/*
+ * GPCv2 has the following power domains, and each domain can be power-up
+ * and power-down via GPC settings.
+ *
+ * Core 0 of A7 power domain
+ * Core1 of A7 power domain
+ * SCU/L2 cache RAM of A7 power domain
+ * Fastmix and megamix power domain
+ * USB OTG1 PHY power domain
+ * USB OTG2 PHY power domain
+ * PCIE PHY power domain
+ * USB HSIC PHY power domain
+ * Core 0 of M4 power domain
+ */
+
+enum gpcv2_slot {
+ CORE0_A7,
+ CORE1_A7,
+ SCU_A7,
+ FAST_MEGA_MIX,
+ MIPI_PHY,
+ PCIE_PHY,
+ USB_OTG1_PHY,
+ USB_OTG2_PHY,
+ USB_HSIC_PHY,
+ CORE0_M4,
+};
+
+struct imx_gpcv2;
+
+struct imx_gpcv2_suspend {
+ void (*set_mode)(struct imx_gpcv2 *, enum gpcv2_mode mode);
+ void (*lpm_cpu_power_gate)(struct imx_gpcv2 *, u32, bool);
+ void (*lpm_plat_power_gate)(struct imx_gpcv2 *, bool);
+ void (*lpm_env_setup)(struct imx_gpcv2 *);
+ void (*lpm_env_clean)(struct imx_gpcv2 *);
+
+ void (*set_slot)(struct imx_gpcv2 *cd, u32 index,
+ enum gpcv2_slot slot, bool mode);
+ void (*set_act)(struct imx_gpcv2 *cd,
+ enum gpcv2_slot slot, bool mode);
+ void (*clear_slots)(struct imx_gpcv2 *);
+ void (*lpm_enable_core)(struct imx_gpcv2 *,
+ bool enable, u32 offset);
+
+ void (*standby)(struct imx_gpcv2 *);
+ void (*suspend)(struct imx_gpcv2 *);
+
+ void (*suspend_fn_in_ocram)(void __iomem *ocram_vbase);
+ void __iomem *ocram_vbase;
+};
+
+struct imx_gpcv2 {
+ u32 *wakeupmix_mask;
+ u32 *lpsrmix_mask;
+ u32 *mfmix_mask;
+ spinlock_t lock;
+
+ struct imx_gpcv2_suspend *pm;
+ struct regmap *anatop;
+ struct regmap *gpcv2;
+
+ u32 (*get_wakeup_source)(u32 **);
+};
+
+struct imx7_pm_base {
+ phys_addr_t pbase;
+ void __iomem *vbase;
+};
+
+struct imx7_pm_socdata {
+ u32 ddr_type;
+ const char *ddrc_compat;
+ const char *ddrc_phy_compat;
+ const char *src_compat;
+ const char *iomuxc_gpr_compat;
+ const char *ccm_compat;
+ const char *gpc_compat;
+ const char *anatop_compat;
+ const u32 ddrc_num;
+ const u32 (*ddrc_offset)[2];
+ const u32 ddrc_phy_num;
+ const u32 (*ddrc_phy_offset)[2];
+};
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx7.S), if this struct
+ * definition is changed, the offset definition in
+ * arch/arm/mach-imx/suspend-imx7.S must be also changed accordingly,
+ * otherwise, the suspend to ocram function will be broken!
+ */
+
+struct imx7_cpu_pm_info {
+ u32 m4_reserve0;
+ u32 m4_reserve1;
+ u32 m4_reserve2;
+
+ /* The physical address of pm_info. */
+ phys_addr_t pbase;
+
+ /* The physical resume address for asm code */
+ phys_addr_t resume_addr;
+ u32 ddr_type;
+
+ u32 pm_info_size;
+
+ struct imx7_pm_base ddrc_base;
+ struct imx7_pm_base ddrc_phy_base;
+ struct imx7_pm_base src_base;
+ struct imx7_pm_base iomuxc_gpr_base;
+ struct imx7_pm_base ccm_base;
+ struct imx7_pm_base gpc_base;
+ struct imx7_pm_base l2_base;
+ struct imx7_pm_base anatop_base;
+
+ u32 ttbr1;
+
+ /* Number of DDRC which need saved/restored. */
+ u32 ddrc_num;
+
+ /* To save offset and value */
+ u32 ddrc_val[MX7_MAX_DDRC_NUM][2];
+
+ /* Number of DDRC which need saved/restored. */
+ u32 ddrc_phy_num;
+
+ /* To save offset and value */
+ u32 ddrc_phy_val[MX7_MAX_DDRC_NUM][2];
+} __aligned(8);
+
+static const u32 imx7d_ddrc_ddr3_setting[][2] __initconst = {
+ { 0x0, READ_DATA_FROM_HARDWARE },
+ { 0x1a0, READ_DATA_FROM_HARDWARE },
+ { 0x1a4, READ_DATA_FROM_HARDWARE },
+ { 0x1a8, READ_DATA_FROM_HARDWARE },
+ { 0x64, READ_DATA_FROM_HARDWARE },
+ { 0x490, 0x00000001 },
+ { 0xd0, 0xc0020001 },
+ { 0xd4, READ_DATA_FROM_HARDWARE },
+ { 0xdc, READ_DATA_FROM_HARDWARE },
+ { 0xe0, READ_DATA_FROM_HARDWARE },
+ { 0xe4, READ_DATA_FROM_HARDWARE },
+ { 0xf4, READ_DATA_FROM_HARDWARE },
+ { 0x100, READ_DATA_FROM_HARDWARE },
+ { 0x104, READ_DATA_FROM_HARDWARE },
+ { 0x108, READ_DATA_FROM_HARDWARE },
+ { 0x10c, READ_DATA_FROM_HARDWARE },
+ { 0x110, READ_DATA_FROM_HARDWARE },
+ { 0x114, READ_DATA_FROM_HARDWARE },
+ { 0x120, 0x03030803 },
+ { 0x180, READ_DATA_FROM_HARDWARE },
+ { 0x190, READ_DATA_FROM_HARDWARE },
+ { 0x194, READ_DATA_FROM_HARDWARE },
+ { 0x200, READ_DATA_FROM_HARDWARE },
+ { 0x204, READ_DATA_FROM_HARDWARE },
+ { 0x214, READ_DATA_FROM_HARDWARE },
+ { 0x218, READ_DATA_FROM_HARDWARE },
+ { 0x240, 0x06000601 },
+ { 0x244, READ_DATA_FROM_HARDWARE },
+};
+
+static const u32 imx7d_ddrc_phy_ddr3_setting[][2] __initconst = {
+ { 0x0, READ_DATA_FROM_HARDWARE },
+ { 0x4, READ_DATA_FROM_HARDWARE },
+ { 0x10, READ_DATA_FROM_HARDWARE },
+ { 0x9c, READ_DATA_FROM_HARDWARE },
+ { 0x20, READ_DATA_FROM_HARDWARE },
+ { 0x30, READ_DATA_FROM_HARDWARE },
+ { 0x50, 0x01000010 },
+ { 0x50, 0x00000010 },
+ { 0xc0, 0x0e407304 },
+ { 0xc0, 0x0e447304 },
+ { 0xc0, 0x0e447306 },
+ { 0xc0, 0x0e447304 },
+ { 0xc0, 0x0e407306 },
+};
+
+static const struct imx7_pm_socdata imx7d_pm_data_ddr3 __initconst = {
+ .iomuxc_gpr_compat = "fsl,imx7d-iomuxc",
+ .ddrc_phy_compat = "fsl,imx7d-ddrc-phy",
+ .anatop_compat = "fsl,imx7d-anatop",
+ .ddrc_compat = "fsl,imx7d-ddrc",
+ .ccm_compat = "fsl,imx7d-ccm",
+ .src_compat = "fsl,imx7d-src",
+ .gpc_compat = "fsl,imx7d-gpc",
+ .ddrc_phy_num = ARRAY_SIZE(imx7d_ddrc_phy_ddr3_setting),
+ .ddrc_phy_offset = imx7d_ddrc_phy_ddr3_setting,
+ .ddrc_num = ARRAY_SIZE(imx7d_ddrc_ddr3_setting),
+ .ddrc_offset = imx7d_ddrc_ddr3_setting,
+};
+
+static struct imx_gpcv2 *gpcv2_instance;
+
+static void imx_gpcv2_lpm_clear_slots(struct imx_gpcv2 *gpc)
+{
+ int i;
+
+ for (i = 0; i < GPC_MAX_SLOT_NUMBER; i++)
+ regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(i), 0x0);
+
+ regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7,
+ BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP |
+ BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
+}
+
+static void imx_gpcv2_lpm_enable_core(struct imx_gpcv2 *gpc,
+ bool enable, u32 offset)
+{
+ regmap_write(gpc->gpcv2, offset, enable);
+}
+
+static void imx_gpcv2_lpm_slot_setup(struct imx_gpcv2 *gpc,
+ u32 index, enum gpcv2_slot slot, bool powerup)
+{
+ u32 val;
+
+ if (index >= GPC_MAX_SLOT_NUMBER) {
+ pr_err("Invalid slot index!\n");
+ return;
+ }
+
+ val = (powerup ? 0x2 : 0x1) << (slot * 2);
+ regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(index), val);
+}
+
+static void imx_gpcv2_lpm_set_ack(struct imx_gpcv2 *gpc,
+ enum gpcv2_slot slot, bool powerup)
+{
+ u32 val;
+
+ regmap_read(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, &val);
+
+ /* clear dummy ack */
+ val &= ~(powerup ? BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP :
+ BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
+
+ val |= 1 << (slot + (powerup ? 16 : 0));
+ regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, val);
+}
+
+static void imx_gpcv2_lpm_env_setup(struct imx_gpcv2 *gpc)
+{
+ /* PLL and PFDs overwrite set */
+ regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_SET,
+ BM_ANADIG_ARM_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_SET,
+ BM_ANADIG_DDR_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_SET,
+ BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_SET,
+ BM_ANADIG_ENET_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_SET,
+ BM_ANADIG_AUDIO_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_SET,
+ BM_ANADIG_VIDEO_PLL_OVERRIDE);
+}
+
+static void imx_gpcv2_lpm_env_clean(struct imx_gpcv2 *gpc)
+{
+ /* PLL and PFDs overwrite clear */
+ regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_CLR,
+ BM_ANADIG_ARM_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_CLR,
+ BM_ANADIG_DDR_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_CLR,
+ BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_CLR,
+ BM_ANADIG_ENET_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_CLR,
+ BM_ANADIG_AUDIO_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_CLR,
+ BM_ANADIG_VIDEO_PLL_OVERRIDE);
+}
+
+static void imx_gpcv2_lpm_set_mode(struct imx_gpcv2 *gpc,
+ enum gpcv2_mode mode)
+{
+ u32 lpcr, slpcr;
+
+ regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &lpcr);
+ regmap_read(gpc->gpcv2, GPC_SLPCR, &slpcr);
+
+ /* all cores' LPM settings must be same */
+ lpcr &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
+ lpcr |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+
+ slpcr &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN |
+ BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
+
+ switch (mode) {
+ case GPC_WAIT_CLOCKED:
+ break;
+ case GPC_WAIT_UNCLOCKED:
+ lpcr |= A7_LPM_WAIT;
+ lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ break;
+ case GPC_STOP_POWER_ON:
+ lpcr |= A7_LPM_STOP;
+ lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
+ BM_SLPCR_BYPASS_PMIC_READY);
+ break;
+ case GPC_STOP_POWER_OFF:
+ lpcr |= A7_LPM_STOP;
+ lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
+ BM_SLPCR_SBYOS | BM_SLPCR_VSTBY |
+ BM_SLPCR_BYPASS_PMIC_READY);
+ break;
+ default:
+ return;
+ }
+ regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, lpcr);
+ regmap_write(gpc->gpcv2, GPC_SLPCR, slpcr);
+}
+
+static void imx_gpcv2_lpm_cpu_power_gate(struct imx_gpcv2 *gpc,
+ u32 cpu, bool engate)
+{
+ u32 val;
+
+ const u32 val_pdn[2] = {
+ BM_LPCR_A7_AD_EN_C0_PDN | BM_LPCR_A7_AD_EN_C0_PUP,
+ BM_LPCR_A7_AD_EN_C1_PDN | BM_LPCR_A7_AD_EN_C1_PUP,
+ };
+
+ regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
+ if (engate)
+ val |= val_pdn[cpu];
+ else
+ val &= ~val_pdn[cpu];
+
+ regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val);
+}
+
+static void imx_lpm_plat_power_gate(struct imx_gpcv2 *gpc, bool engate)
+{
+ u32 val;
+
+ regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
+ val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
+ if (engate)
+ val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
+
+ regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val);
+}
+
+static void imx_gpcv2_lpm_standby(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_suspend *pm = gpc->pm;
+
+ pm->lpm_env_setup(gpc);
+ /* pm->set_mode(gpc, GPC_STOP_POWER_OFF); */
+ pm->set_mode(gpc, GPC_WAIT_UNCLOCKED);
+
+ /* Zzz ... */
+ cpu_do_idle();
+
+ pm->set_mode(gpc, GPC_WAIT_CLOCKED);
+ pm->lpm_env_clean(gpc);
+}
+
+static int gpcv2_suspend_finish(unsigned long val)
+{
+ struct imx_gpcv2_suspend *pm = (struct imx_gpcv2_suspend *)val;
+
+ if (!pm->suspend_fn_in_ocram) {
+ cpu_do_idle();
+ } else {
+ /*
+ * call low level suspend function in ocram,
+ * as we need to float DDR IO.
+ */
+ local_flush_tlb_all();
+ pm->suspend_fn_in_ocram(pm->ocram_vbase);
+ }
+
+ return 0;
+}
+
+static void imx_gpcv2_lpm_suspend(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_suspend *pm = gpc->pm;
+ u32 *sources;
+ int i, num;
+
+ pm->lpm_env_setup(gpc);
+ pm->set_mode(gpc, GPC_STOP_POWER_OFF);
+
+ /* enable core0 power down/up with low power mode */
+ pm->lpm_cpu_power_gate(gpc, 0, true);
+
+ /* enable plat power down with low power mode */
+ pm->lpm_plat_power_gate(gpc, true);
+
+ /*
+ * To avoid confuse, we use slot 0~4 for power down,
+ * slot 5~9 for power up.
+ *
+ * Power down slot sequence:
+ * Slot0 -> CORE0
+ * Slot1 -> Mega/Fast MIX
+ * Slot2 -> SCU
+ *
+ * Power up slot sequence:
+ * Slot5 -> Mega/Fast MIX
+ * Slot6 -> SCU
+ * Slot7 -> CORE0
+ */
+ pm->set_slot(gpc, 0, CORE0_A7, false);
+ pm->set_slot(gpc, 2, SCU_A7, false);
+
+ if (gpc->get_wakeup_source) {
+ pm->set_slot(gpc, 1, FAST_MEGA_MIX, false);
+ pm->set_slot(gpc, 5, FAST_MEGA_MIX, true);
+ pm->lpm_enable_core(gpc, true, GPC_PGC_FM);
+ num = gpc->get_wakeup_source(&sources);
+ for (i = 0; i < num; i++) {
+ if ((~sources[i] & gpc->mfmix_mask[i]) == 0)
+ continue;
+ pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
+ break;
+ }
+ }
+
+ pm->set_slot(gpc, 6, SCU_A7, true);
+ pm->set_slot(gpc, 7, CORE0_A7, true);
+
+ /* Set Power down act */
+ pm->set_act(gpc, SCU_A7, false);
+
+ /* Set Power up act */
+ pm->set_act(gpc, CORE0_A7, true);
+
+ /* enable core0, scu */
+ pm->lpm_enable_core(gpc, true, GPC_PGC_C0);
+ pm->lpm_enable_core(gpc, true, GPC_PGC_SCU);
+
+ cpu_suspend((unsigned long)pm, gpcv2_suspend_finish);
+
+ pm->lpm_env_clean(gpc);
+ pm->set_mode(gpc, GPC_WAIT_CLOCKED);
+ pm->lpm_cpu_power_gate(gpc, 0, false);
+ pm->lpm_plat_power_gate(gpc, false);
+
+ pm->lpm_enable_core(gpc, false, GPC_PGC_C0);
+ pm->lpm_enable_core(gpc, false, GPC_PGC_SCU);
+ pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
+ pm->clear_slots(gpc);
+}
+
+static int imx_gpcv2_pm_enter(suspend_state_t state)
+{
+ struct imx_gpcv2_suspend *pm;
+
+ BUG_ON(!gpcv2_instance);
+ pm = gpcv2_instance->pm;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pm->standby(gpcv2_instance);
+ break;
+
+ case PM_SUSPEND_MEM:
+ pm->suspend(gpcv2_instance);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int imx_gpcv2_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static int __init imx_get_base_from_node(struct device_node *node,
+ struct imx7_pm_base *base)
+{
+ struct resource res;
+ int ret = 0;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = ioremap(res.start, resource_size(&res));
+ if (!base->vbase) {
+ iounmap(base->vbase);
+ ret = -ENOMEM;
+ }
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static int __init imx_get_base_from_dt(struct imx7_pm_base *base,
+ const char *compat)
+{
+ struct device_node *node;
+ struct resource res;
+ int ret = 0;
+
+ node = of_find_compatible_node(NULL, NULL, compat);
+ if (!node) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = ioremap(res.start, resource_size(&res));
+ if (!base->vbase)
+ ret = -ENOMEM;
+
+put_node:
+ of_node_put(node);
+out:
+ return ret;
+}
+
+static int __init imx_get_exec_base_from_dt(struct imx7_pm_base *base,
+ const char *compat)
+{
+ struct device_node *node;
+ struct resource res;
+ int ret = 0;
+
+ node = of_find_compatible_node(NULL, NULL, compat);
+ if (!node) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = __arm_ioremap_exec(res.start, resource_size(&res), false);
+
+ if (!base->vbase)
+ ret = -ENOMEM;
+
+put_node:
+ of_node_put(node);
+out:
+ return ret;
+}
+
+static int __init imx_gpcv2_suspend_init(struct imx_gpcv2_suspend *pm,
+ const struct imx7_pm_socdata *socdata)
+{
+ struct imx7_pm_base aips_base[3] = { {0, 0}, {0, 0}, {0, 0} };
+ struct imx7_pm_base sram_base = {0, 0};
+ struct imx7_cpu_pm_info *pm_info;
+ struct device_node *node = NULL;
+ int i, ret = 0;
+
+ const u32 (*ddrc_phy_offset_array)[2];
+ const u32 (*ddrc_offset_array)[2];
+
+ if (!socdata || !pm) {
+ pr_warn("%s: invalid argument!\n", __func__);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 3; i++) {
+ node = of_find_compatible_node(node, NULL, "fsl,aips-bus");
+ if (!node) {
+ pr_warn("%s: failed to find aips %d node!\n",
+ __func__, i);
+ break;
+ }
+ ret = imx_get_base_from_node(node, &aips_base[i]);
+ if (ret) {
+ pr_warn("%s: failed to get aips[%d] base %d!\n",
+ __func__, i, ret);
+ }
+ }
+
+ ret = imx_get_exec_base_from_dt(&sram_base, "fsl,lpm-sram");
+ if (ret) {
+ pr_warn("%s: failed to get lpm-sram base %d!\n",
+ __func__, ret);
+ goto lpm_sram_map_failed;
+ }
+
+ pm_info = sram_base.vbase;
+ pm_info->pbase = sram_base.pbase;
+ pm_info->resume_addr = virt_to_phys(ca7_cpu_resume);
+ pm_info->pm_info_size = sizeof(*pm_info);
+
+ ret = imx_get_base_from_dt(&pm_info->ccm_base, socdata->ccm_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
+ goto ccm_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->ddrc_base, socdata->ddrc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ddrc base %d!\n", __func__, ret);
+ goto ddrc_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->ddrc_phy_base,
+ socdata->ddrc_phy_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ddrc_phy base %d!\n", __func__, ret);
+ goto ddrc_phy_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->src_base, socdata->src_compat);
+ if (ret) {
+ pr_warn("%s: failed to get src base %d!\n", __func__, ret);
+ goto src_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->iomuxc_gpr_base,
+ socdata->iomuxc_gpr_compat);
+ if (ret) {
+ pr_warn("%s: failed to get iomuxc_gpr base %d!\n",
+ __func__, ret);
+ goto iomuxc_gpr_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->gpc_base, socdata->gpc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
+ goto gpc_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->anatop_base,
+ socdata->anatop_compat);
+ if (ret) {
+ pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
+ goto anatop_map_failed;
+ }
+
+ pm_info->ddrc_num = socdata->ddrc_num;
+ ddrc_offset_array = socdata->ddrc_offset;
+ pm_info->ddrc_phy_num = socdata->ddrc_phy_num;
+ ddrc_phy_offset_array = socdata->ddrc_phy_offset;
+
+ /* initialize DDRC settings */
+ for (i = 0; i < pm_info->ddrc_num; i++) {
+ pm_info->ddrc_val[i][0] = ddrc_offset_array[i][0];
+ if (ddrc_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
+ pm_info->ddrc_val[i][1] =
+ readl_relaxed(pm_info->ddrc_base.vbase +
+ ddrc_offset_array[i][0]);
+ else
+ pm_info->ddrc_val[i][1] = ddrc_offset_array[i][1];
+ }
+
+ /* initialize DDRC PHY settings */
+ for (i = 0; i < pm_info->ddrc_phy_num; i++) {
+ pm_info->ddrc_phy_val[i][0] =
+ ddrc_phy_offset_array[i][0];
+ if (ddrc_phy_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
+ pm_info->ddrc_phy_val[i][1] =
+ readl_relaxed(pm_info->ddrc_phy_base.vbase +
+ ddrc_phy_offset_array[i][0]);
+ else
+ pm_info->ddrc_phy_val[i][1] =
+ ddrc_phy_offset_array[i][1];
+ }
+
+ pm->suspend_fn_in_ocram = fncpy(
+ sram_base.vbase + sizeof(*pm_info),
+ &imx7_suspend,
+ MX7_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
+ pm->ocram_vbase = sram_base.vbase;
+
+ goto put_node;
+
+anatop_map_failed:
+ iounmap(pm_info->anatop_base.vbase);
+gpc_map_failed:
+ iounmap(pm_info->gpc_base.vbase);
+iomuxc_gpr_map_failed:
+ iounmap(pm_info->iomuxc_gpr_base.vbase);
+src_map_failed:
+ iounmap(pm_info->src_base.vbase);
+ddrc_phy_map_failed:
+ iounmap(pm_info->ddrc_phy_base.vbase);
+ddrc_map_failed:
+ iounmap(pm_info->ddrc_base.vbase);
+ccm_map_failed:
+ iounmap(pm_info->ccm_base.vbase);
+lpm_sram_map_failed:
+ iounmap(sram_base.vbase);
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static const struct platform_suspend_ops imx_gpcv2_pm_ops = {
+ .enter = imx_gpcv2_pm_enter,
+ .valid = imx_gpcv2_pm_valid,
+};
+
+static int __init imx_gpcv2_pm_init(void)
+{
+ struct imx_gpcv2_suspend *pm;
+ struct imx_gpcv2 *gpc;
+ int val, num;
+
+ pm = kzalloc(sizeof(struct imx_gpcv2_suspend), GFP_KERNEL);
+ if (!pm) {
+ pr_warn("[GPCv2] %s init failed\r\n", __func__);
+ return -ENOMEM;
+ }
+
+ gpc = kzalloc(sizeof(struct imx_gpcv2), GFP_KERNEL);
+ if (!gpc) {
+ pr_warn("[GPCv2] %s init failed\r\n", __func__);
+ kfree(pm);
+ return -ENOMEM;
+ }
+
+ imx_gpcv2_suspend_init(pm, &imx7d_pm_data_ddr3);
+
+ pm->lpm_env_setup = imx_gpcv2_lpm_env_setup;
+ pm->lpm_env_clean = imx_gpcv2_lpm_env_clean;
+
+ pm->lpm_cpu_power_gate = imx_gpcv2_lpm_cpu_power_gate;
+ pm->lpm_plat_power_gate = imx_lpm_plat_power_gate;
+ pm->lpm_enable_core = imx_gpcv2_lpm_enable_core;
+ pm->set_mode = imx_gpcv2_lpm_set_mode;
+
+ pm->clear_slots = imx_gpcv2_lpm_clear_slots;
+ pm->set_slot = imx_gpcv2_lpm_slot_setup;
+ pm->set_act = imx_gpcv2_lpm_set_ack;
+
+ pm->standby = imx_gpcv2_lpm_standby;
+ pm->suspend = imx_gpcv2_lpm_suspend;
+
+ gpc->anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+ if (IS_ERR(gpc->anatop))
+ goto error_exit;
+
+ gpc->gpcv2 = syscon_regmap_lookup_by_compatible("fsl,imx7d-gpc");
+ if (IS_ERR(gpc->gpcv2))
+ goto error_exit;
+
+ /* only external IRQs to wake up LPM and core 0/1 */
+ regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &val);
+ val |= BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP;
+ regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, val);
+ /* mask m4 dsm trigger */
+ regmap_read(gpc->gpcv2, GPC_LPCR_M4, &val);
+ val |= BM_LPCR_M4_MASK_DSM_TRIGGER;
+ regmap_write(gpc->gpcv2, GPC_LPCR_M4, val);
+
+ /* set mega/fast mix in A7 domain */
+ regmap_write(gpc->gpcv2, GPC_PGC_CPU_MAPPING, 0x1);
+ /* set SCU timing */
+ val = (0x59 << 10) | 0x5B | (0x51 << 20);
+ regmap_write(gpc->gpcv2, GPC_PGC_SCU_TIMING, val);
+
+ gpc->pm = pm;
+ gpc->get_wakeup_source = imx_gpcv2_get_wakeup_source;
+ gpcv2_instance = gpc;
+
+ num = imx_gpcv2_get_wakeup_source(0);
+
+ /*
+ * The IP blocks which may be the wakeup sources are allocated into
+ * several power domains. MFMIX, LPSRMX, and WAKEUPMIX are three of
+ * those power domains. If a bit is '1' in the mask, it means the IP
+ * block is inside the power domain. The mask will be used to decide
+ * if a power domain should be shutdown or not when system goes into
+ * suspend states.
+ */
+
+ if (num)
+ gpc->wakeupmix_mask = kzalloc(sizeof(u32)*num*3, GFP_KERNEL);
+
+ if (!gpc->wakeupmix_mask)
+ goto error_exit;
+
+ /*
+ * Shutdown LPSRMIX and WAKEUP power domain has not been
+ * implemented in this patch yet.
+ */
+
+ gpc->lpsrmix_mask = gpc->wakeupmix_mask + num;
+ gpc->mfmix_mask = gpc->wakeupmix_mask + num*2;
+
+ /* Mask the wakeup sources in M/F power domain */
+ gpc->mfmix_mask[0] = 0x54010000;
+ gpc->mfmix_mask[1] = 0xC00;
+ gpc->mfmix_mask[2] = 0x0;
+ gpc->mfmix_mask[3] = 0x400010;
+
+ suspend_set_ops(&imx_gpcv2_pm_ops);
+ return 0;
+
+error_exit:
+ kfree(pm);
+ kfree(gpc);
+ return -ENODEV;
+}
+
+device_initcall(imx_gpcv2_pm_init);
diff --git a/arch/arm/mach-imx/suspend-imx7.S b/arch/arm/mach-imx/suspend-imx7.S
new file mode 100644
index 0000000..8c3f516
--- /dev/null
+++ b/arch/arm/mach-imx/suspend-imx7.S
@@ -0,0 +1,529 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include "hardware.h"
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * Better to follow below rules to use ARM registers:
+ * r0: pm_info structure address;
+ * r1 ~ r4: for saving pm_info members;
+ * r5 ~ r10: free registers;
+ * r11: io base address.
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ * .
+ * .
+ * .
+ * ^
+ * ^
+ * ^
+ * imx7_suspend code
+ * PM_INFO structure(imx7_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+/*
+ * Below offsets are based on struct imx7_cpu_pm_info
+ * which defined in arch/arm/mach-imx/pm-imx7.c, this
+ * structure contains necessary pm info for low level
+ * suspend related code.
+ */
+#define PM_INFO_M4_RESERVE0_OFFSET 0x0
+#define PM_INFO_M4_RESERVE1_OFFSET 0x4
+#define PM_INFO_M4_RESERVE2_OFFSET 0x8
+#define PM_INFO_PBASE_OFFSET 0xc
+#define PM_INFO_RESUME_ADDR_OFFSET 0x10
+#define PM_INFO_DDR_TYPE_OFFSET 0x14
+#define PM_INFO_PM_INFO_SIZE_OFFSET 0x18
+#define PM_INFO_MX7_DDRC_P_OFFSET 0x1c
+#define PM_INFO_MX7_DDRC_V_OFFSET 0x20
+#define PM_INFO_MX7_DDRC_PHY_P_OFFSET 0x24
+#define PM_INFO_MX7_DDRC_PHY_V_OFFSET 0x28
+#define PM_INFO_MX7_SRC_P_OFFSET 0x2c
+#define PM_INFO_MX7_SRC_V_OFFSET 0x30
+#define PM_INFO_MX7_IOMUXC_GPR_P_OFFSET 0x34
+#define PM_INFO_MX7_IOMUXC_GPR_V_OFFSET 0x38
+#define PM_INFO_MX7_CCM_P_OFFSET 0x3c
+#define PM_INFO_MX7_CCM_V_OFFSET 0x40
+#define PM_INFO_MX7_GPC_P_OFFSET 0x44
+#define PM_INFO_MX7_GPC_V_OFFSET 0x48
+#define PM_INFO_MX7_L2_P_OFFSET 0x4c
+#define PM_INFO_MX7_L2_V_OFFSET 0x50
+#define PM_INFO_MX7_ANATOP_P_OFFSET 0x54
+#define PM_INFO_MX7_ANATOP_V_OFFSET 0x58
+#define PM_INFO_MX7_TTBR1_V_OFFSET 0x5c
+#define PM_INFO_DDRC_REG_NUM_OFFSET 0x60
+#define PM_INFO_DDRC_REG_OFFSET 0x64
+#define PM_INFO_DDRC_VALUE_OFFSET 0x68
+#define PM_INFO_DDRC_PHY_REG_NUM_OFFSET 0x164
+#define PM_INFO_DDRC_PHY_REG_OFFSET 0x168
+#define PM_INFO_DDRC_PHY_VALUE_OFFSET 0x16c
+
+#define MX7_SRC_GPR1 0x74
+#define MX7_SRC_GPR2 0x78
+#define GPC_PGC_FM 0xa00
+#define ANADIG_SNVS_MISC_CTRL 0x380
+#define DDRC_STAT 0x4
+#define DDRC_PWRCTL 0x30
+#define DDRC_PSTAT 0x3fc
+#define DDRC_PCTRL_0 0x490
+#define DDRC_DFIMISC 0x1b0
+#define DDRC_SWCTL 0x320
+#define DDRC_SWSTAT 0x324
+#define DDRPHY_LP_CON0 0x18
+
+ .align 3
+
+ .macro disable_l1_dcache
+
+ /*
+ * Flush all data from the L1 data cache before disabling
+ * SCTLR.C bit.
+ */
+ push {r0 - r10, lr}
+ ldr r7, =v7_flush_dcache_all
+ mov lr, pc
+ mov pc, r7
+ pop {r0 - r10, lr}
+
+ /* disable d-cache */
+ mrc p15, 0, r7, c1, c0, 0
+ bic r7, r7, #(1 << 2)
+ mcr p15, 0, r7, c1, c0, 0
+ dsb
+ isb
+
+ push {r0 - r10, lr}
+ ldr r7, =v7_flush_dcache_all
+ mov lr, pc
+ mov pc, r7
+ pop {r0 - r10, lr}
+
+ .endm
+
+
+ .macro enable_l1_dcache
+
+ /* Enable L1 data cache. */
+ mrc p15, 0, r6, c1, c0, 0
+ orr r6, r6, #0x4
+ mcr p15, 0, r6, c1, c0, 0
+
+ dsb
+ isb
+
+ .endm
+
+
+ .macro ddrc_enter_self_refresh
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait rw port_busy clear */
+ ldr r6, =(0x1 << 16)
+ orr r6, r6, #0x1
+1:
+ ldr r7, [r11, #DDRC_PSTAT]
+ ands r7, r7, r6
+ bne 1b
+
+ /* enter self-refresh bit 5 */
+ ldr r7, =(0x1 << 5)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+2:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 2b
+3:
+ ldr r7, [r11, #DDRC_STAT]
+ ands r7, r7, #0x20
+ beq 3b
+
+ /* disable dram clk */
+ ldr r7, [r11, #DDRC_PWRCTL]
+ orr r7, r7, #(1 << 3)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ .endm
+
+ .macro ddrc_exit_self_refresh
+
+ cmp r5, #0x0
+ ldreq r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldrne r11, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+4:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ beq 4b
+
+ /* enable auto self-refresh */
+ ldr r7, [r11, #DDRC_PWRCTL]
+ orr r7, r7, #(1 << 0)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ .endm
+
+ .macro wait_delay
+5:
+ subs r6, r6, #0x1
+ bne 5b
+
+ .endm
+
+ .macro ddr_enter_retention
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PCTRL_0]
+
+ /* wait rw port_busy clear */
+ ldr r6, =(0x1 << 16)
+ orr r6, r6, #0x1
+6:
+ ldr r7, [r11, #DDRC_PSTAT]
+ ands r7, r7, r6
+ bne 6b
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ /* enter self-refresh bit 5 */
+ ldr r7, =(0x1 << 5)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+7:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 7b
+8:
+ ldr r7, [r11, #DDRC_STAT]
+ ands r7, r7, #0x20
+ beq 8b
+
+ /* disable dram clk */
+ ldr r7, =(0x1 << 5)
+ orr r7, r7, #(1 << 3)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* reset ddr_phy */
+ ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, =0x0
+ str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
+
+ /* delay 7 us */
+ ldr r6, =6000
+ wait_delay
+
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldr r6, =0x1000
+ ldr r7, [r11, r6]
+ orr r7, r7, #0x1
+ str r7, [r11, r6]
+ /* turn off ddr power */
+ ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, =(0x1 << 29)
+ str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
+
+ .endm
+
+ .macro ddr_exit_retention
+
+ cmp r5, #0x0
+ ldreq r1, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldrne r1, [r0, #PM_INFO_MX7_ANATOP_P_OFFSET]
+ ldreq r2, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldrne r2, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
+ ldreq r3, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldrne r3, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
+ ldreq r4, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
+ ldrne r4, [r0, #PM_INFO_MX7_DDRC_PHY_P_OFFSET]
+ ldreq r10, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
+ ldrne r10, [r0, #PM_INFO_MX7_CCM_P_OFFSET]
+ ldreq r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldrne r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_P_OFFSET]
+
+ /* turn on ddr power */
+ ldr r7, =(0x1 << 29)
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ ldr r6, =50
+ wait_delay
+
+ ldr r7, =0x0
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ /* clear ddr_phy reset */
+ ldr r6, =0x1000
+ ldr r7, [r2, r6]
+ orr r7, r7, #0x3
+ str r7, [r2, r6]
+ ldr r7, [r2, r6]
+ bic r7, r7, #0x1
+ str r7, [r2, r6]
+
+ ldr r6, [r0, #PM_INFO_DDRC_REG_NUM_OFFSET]
+ ldr r7, =PM_INFO_DDRC_REG_OFFSET
+ add r7, r7, r0
+9:
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ str r9, [r3, r8]
+ subs r6, r6, #0x1
+ bne 9b
+ ldr r7, =0x20
+ str r7, [r3, #DDRC_PWRCTL]
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_DFIMISC]
+
+ /* do PHY, clear ddr_phy reset */
+ ldr r6, =0x1000
+ ldr r7, [r2, r6]
+ bic r7, r7, #0x2
+ str r7, [r2, r6]
+
+ ldr r7, =(0x1 << 30)
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ /* need to delay ~5mS */
+ ldr r6, =0x100000
+ wait_delay
+
+ ldr r6, [r0, #PM_INFO_DDRC_PHY_REG_NUM_OFFSET]
+ ldr r7, =PM_INFO_DDRC_PHY_REG_OFFSET
+ add r7, r7, r0
+
+10:
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ str r9, [r4, r8]
+ subs r6, r6, #0x1
+ bne 10b
+
+ ldr r7, =0x0
+ add r9, r10, #0x4000
+ str r7, [r9, #0x130]
+
+ cmp r5, #0x0
+ beq 101f
+ ldr r7, =0x170
+ orr r7, r7, #0x8
+ str r7, [r11, #0x20]
+
+101:
+ ldr r7, =0x2
+ add r9, r10, #0x4000
+ str r7, [r9, #0x130]
+
+ ldr r7, =0xf
+ str r7, [r4, #DDRPHY_LP_CON0]
+
+ /* wait until self-refresh mode entered */
+11:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 11b
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_SWCTL]
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_DFIMISC]
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_SWCTL]
+12:
+ ldr r7, [r3, #DDRC_SWSTAT]
+ and r7, r7, #0x1
+ cmp r7, #0x1
+ bne 12b
+13:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x20
+ cmp r7, #0x20
+ bne 13b
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_PWRCTL]
+14:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x30
+ cmp r7, #0x0
+ bne 14b
+
+15:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x1
+ bne 15b
+
+ /* enable port */
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_PCTRL_0]
+
+ .endm
+
+ENTRY(imx7_suspend)
+ push {r4-r12}
+
+ /*
+ * The value of r0 is mapped the same in origin table and IRAM table,
+ * thus no need to care r0 here.
+ */
+ ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
+ ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+ ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
+ ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
+
+ /*
+ * counting the resume address in iram
+ * to set it in SRC register.
+ */
+ ldr r6, =imx7_suspend
+ ldr r7, =resume
+ sub r7, r7, r6
+ add r8, r1, r4
+ add r9, r8, r7
+
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ /* store physical resume addr and pm_info address. */
+ str r9, [r11, #MX7_SRC_GPR1]
+ str r1, [r11, #MX7_SRC_GPR2]
+
+ disable_l1_dcache
+
+ /*
+ * make sure TLB contain the addr we want,
+ * as we will access them after DDR is in
+ * self-refresh mode.
+ */
+ ldr r6, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldr r7, [r0, #0x0]
+ ldr r6, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
+ add r6, #0x4000
+ ldr r7, [r6]
+ ldr r6, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ ldr r6, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ add r6, #0x1000
+ ldr r7, [r6]
+ ldr r6, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ ldr r7, [r6, #0x490]
+ ldr r6, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
+ ldr r7, [r6, #0x0]
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq ddr_only_self_refresh
+
+ ddr_enter_retention
+ b ddr_retention_enter_out
+ddr_only_self_refresh:
+ ddrc_enter_self_refresh
+ddr_retention_enter_out:
+
+ /* Zzz, enter stop mode */
+ wfi
+ nop
+ nop
+ nop
+ nop
+
+ mov r5, #0x0
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq wfi_ddr_self_refresh_out
+
+ ddr_exit_retention
+ b wfi_ddr_retention_out
+wfi_ddr_self_refresh_out:
+ ddrc_exit_self_refresh
+wfi_ddr_retention_out:
+
+ ldr r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldr r7, =0x170
+ orr r7, r7, #0x8
+ str r7, [r11, #0x20]
+
+ /* clear core0's entry and parameter */
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ mov r7, #0x0
+ str r7, [r11, #MX7_SRC_GPR1]
+ str r7, [r11, #MX7_SRC_GPR2]
+
+ enable_l1_dcache
+
+ pop {r4-r12}
+ /* return to suspend finish */
+ mov pc, lr
+
+resume:
+ /* invalidate L1 I-cache first */
+ mov r6, #0x0
+ mcr p15, 0, r6, c7, c5, 0
+ mcr p15, 0, r6, c7, c5, 6
+ /* enable the Icache and branch prediction */
+ mov r6, #0x1800
+ mcr p15, 0, r6, c1, c0, 0
+ isb
+
+ /* get physical resume address from pm_info. */
+ ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+ /* clear core0's entry and parameter */
+ ldr r11, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
+ mov r7, #0x0
+ str r7, [r11, #MX7_SRC_GPR1]
+ str r7, [r11, #MX7_SRC_GPR2]
+
+ mov r5, #0x1
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_P_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq dsm_ddr_self_refresh_out
+
+ ddr_exit_retention
+ b dsm_ddr_retention_out
+dsm_ddr_self_refresh_out:
+ ddrc_exit_self_refresh
+dsm_ddr_retention_out:
+
+ mov pc, lr
+ENDPROC(imx7_suspend)
+
+ENTRY(ca7_cpu_resume)
+ bl v7_invalidate_l1
+ b cpu_resume
+ENDPROC(ca7_cpu_resume)
--
2.5.0.rc2
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-07-31 21:33 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-07-31 21:33 UTC (permalink / raw)
To: linux-arm-kernel
IMX7D contains a new version of GPC IP block (GPCv2). It has two
major functions: power management and wakeup source management.
GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4
domains. And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
After configuring the GPCv2 module, the platform can enter into a
selected mode either automatically triggered by ARM WFI instruction or
manually by software. The system will exit the low power states
by the predefined wakeup sources which are managed by the gpcv2
irqchip driver.
This patch adds a new suspend driver to manage the power states on IMX7D.
It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
---
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/Makefile | 2 +
arch/arm/mach-imx/common.h | 4 +
arch/arm/mach-imx/pm-imx7.c | 917 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
5 files changed, 1453 insertions(+)
create mode 100644 arch/arm/mach-imx/pm-imx7.c
create mode 100644 arch/arm/mach-imx/suspend-imx7.S
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8ceda28..54f8553 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -562,6 +562,7 @@ config SOC_IMX7D
select ARM_GIC
select HAVE_IMX_ANATOP
select HAVE_IMX_MMDC
+ select IMX_GPCV2
help
This enables support for Freescale i.MX7 Dual processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index fb689d8..60f13fd 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -88,6 +88,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
+AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SOC_IMX7D) += suspend-imx7.o pm-imx7.o
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 21e4e86..c5767f4 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -126,6 +126,10 @@ static const u32 imx53_suspend_sz;
static inline void imx6_suspend(void __iomem *ocram_vbase) {}
#endif
+void ca7_cpu_resume(void);
+void imx7_suspend(void __iomem *ocram_vbase);
+u32 imx_gpcv2_get_wakeup_source(u32 **sources);
+
void imx6_pm_ccm_init(const char *ccm_compat);
void imx6q_pm_init(void);
void imx6dl_pm_init(void);
diff --git a/arch/arm/mach-imx/pm-imx7.c b/arch/arm/mach-imx/pm-imx7.c
new file mode 100644
index 0000000..052c2cb
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx7.c
@@ -0,0 +1,917 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/suspend.h>
+#include <linux/slab.h>
+#include <asm/suspend.h>
+#include <asm/fncpy.h>
+
+#include "common.h"
+
+#define GPC_LPCR_A7_BSC 0x0
+#define GPC_LPCR_A7_AD 0x4
+#define GPC_LPCR_M4 0x8
+
+#define GPC_SLPCR 0x14
+#define GPC_PGC_ACK_SEL_A7 0x24
+
+#define GPC_SLOTx_CFG(x) (0xb0 + 4 * (x))
+
+#define GPC_PGC_CPU_MAPPING 0xec
+
+#define GPC_PGC_C0 0x800
+#define GPC_PGC_C1 0x840
+#define GPC_PGC_SCU 0x880
+#define GPC_PGC_SCU_TIMING 0x890
+#define GPC_PGC_FM 0xa00
+#define GPC_PGC_MIPI_PHY 0xc00
+#define GPC_PGC_PCIE_PHY 0xc40
+#define GPC_PGC_USB_OTG1_PHY 0xc80
+#define GPC_PGC_USB_OTG2_PHY 0xcc0
+#define GPC_PGC_USB_HSIC_PHY 0xd00
+
+#define ANADIG_ARM_PLL 0x60
+#define ANADIG_DDR_PLL 0x70
+#define ANADIG_SYS_PLL 0xb0
+#define ANADIG_ENET_PLL 0xe0
+#define ANADIG_AUDIO_PLL 0xf0
+#define ANADIG_VIDEO_PLL 0x130
+
+#define BM_LPCR_A7_AD_L2PGE (0x1 << 16)
+#define BM_LPCR_A7_AD_EN_C1_PUP (0x1 << 11)
+#define BM_LPCR_A7_AD_EN_C1_IRQ_PUP (0x1 << 10)
+#define BM_LPCR_A7_AD_EN_C0_PUP (0x1 << 9)
+#define BM_LPCR_A7_AD_EN_C0_IRQ_PUP (0x1 << 8)
+#define BM_LPCR_A7_AD_EN_PLAT_PDN (0x1 << 4)
+#define BM_LPCR_A7_AD_EN_C1_PDN (0x1 << 3)
+#define BM_LPCR_A7_AD_EN_C1_WFI_PDN (0x1 << 2)
+#define BM_LPCR_A7_AD_EN_C0_PDN (0x1 << 1)
+#define BM_LPCR_A7_AD_EN_C0_WFI_PDN (0x1)
+
+#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP (0x7 << 28)
+#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM (0x1 << 14)
+#define BM_LPCR_A7_BSC_LPM1 (0x3 << 2)
+#define BM_LPCR_A7_BSC_LPM0 (0x3)
+
+#define BM_LPCR_M4_MASK_DSM_TRIGGER (0x1 << 31)
+
+#define BM_SLPCR_EN_DSM (0x1 << 31)
+#define BM_SLPCR_RBC_EN (0x1 << 30)
+#define BM_SLPCR_VSTBY (0x1 << 2)
+#define BM_SLPCR_SBYOS (0x1 << 1)
+#define BM_SLPCR_BYPASS_PMIC_READY (0x1)
+
+#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP (0x1 << 31)
+#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN (0x1 << 15)
+
+#define BM_ANADIG_ARM_PLL_OVERRIDE (0x1 << 20)
+#define BM_ANADIG_DDR_PLL_OVERRIDE (0x1 << 19)
+#define BM_ANADIG_SYS_PLL_PFDx_OVERRIDE (0x1FF << 17)
+#define BM_ANADIG_ENET_PLL_OVERRIDE (0x1 << 13)
+#define BM_ANADIG_AUDIO_PLL_OVERRIDE (0x1 << 24)
+#define BM_ANADIG_VIDEO_PLL_OVERRIDE (0x1 << 24)
+
+#define A7_LPM_WAIT 0x5
+#define A7_LPM_STOP 0xa
+#define GPC_MAX_SLOT_NUMBER 10
+
+#define REG_SET 0x4
+#define REG_CLR 0x8
+
+#define MX7_MAX_DDRC_NUM 32
+#define MX7_MAX_DDRC_PHY_NUM 16
+
+#define READ_DATA_FROM_HARDWARE 0
+#define MX7_SUSPEND_OCRAM_SIZE 0x1000
+
+enum gpcv2_mode {
+ GPC_WAIT_CLOCKED,
+ GPC_WAIT_UNCLOCKED,
+ GPC_STOP_POWER_ON,
+ GPC_STOP_POWER_OFF,
+};
+
+/*
+ * GPCv2 has the following power domains, and each domain can be power-up
+ * and power-down via GPC settings.
+ *
+ * Core 0 of A7 power domain
+ * Core1 of A7 power domain
+ * SCU/L2 cache RAM of A7 power domain
+ * Fastmix and megamix power domain
+ * USB OTG1 PHY power domain
+ * USB OTG2 PHY power domain
+ * PCIE PHY power domain
+ * USB HSIC PHY power domain
+ * Core 0 of M4 power domain
+ */
+
+enum gpcv2_slot {
+ CORE0_A7,
+ CORE1_A7,
+ SCU_A7,
+ FAST_MEGA_MIX,
+ MIPI_PHY,
+ PCIE_PHY,
+ USB_OTG1_PHY,
+ USB_OTG2_PHY,
+ USB_HSIC_PHY,
+ CORE0_M4,
+};
+
+struct imx_gpcv2;
+
+struct imx_gpcv2_suspend {
+ void (*set_mode)(struct imx_gpcv2 *, enum gpcv2_mode mode);
+ void (*lpm_cpu_power_gate)(struct imx_gpcv2 *, u32, bool);
+ void (*lpm_plat_power_gate)(struct imx_gpcv2 *, bool);
+ void (*lpm_env_setup)(struct imx_gpcv2 *);
+ void (*lpm_env_clean)(struct imx_gpcv2 *);
+
+ void (*set_slot)(struct imx_gpcv2 *cd, u32 index,
+ enum gpcv2_slot slot, bool mode);
+ void (*set_act)(struct imx_gpcv2 *cd,
+ enum gpcv2_slot slot, bool mode);
+ void (*clear_slots)(struct imx_gpcv2 *);
+ void (*lpm_enable_core)(struct imx_gpcv2 *,
+ bool enable, u32 offset);
+
+ void (*standby)(struct imx_gpcv2 *);
+ void (*suspend)(struct imx_gpcv2 *);
+
+ void (*suspend_fn_in_ocram)(void __iomem *ocram_vbase);
+ void __iomem *ocram_vbase;
+};
+
+struct imx_gpcv2 {
+ u32 *wakeupmix_mask;
+ u32 *lpsrmix_mask;
+ u32 *mfmix_mask;
+ spinlock_t lock;
+
+ struct imx_gpcv2_suspend *pm;
+ struct regmap *anatop;
+ struct regmap *gpcv2;
+
+ u32 (*get_wakeup_source)(u32 **);
+};
+
+struct imx7_pm_base {
+ phys_addr_t pbase;
+ void __iomem *vbase;
+};
+
+struct imx7_pm_socdata {
+ u32 ddr_type;
+ const char *ddrc_compat;
+ const char *ddrc_phy_compat;
+ const char *src_compat;
+ const char *iomuxc_gpr_compat;
+ const char *ccm_compat;
+ const char *gpc_compat;
+ const char *anatop_compat;
+ const u32 ddrc_num;
+ const u32 (*ddrc_offset)[2];
+ const u32 ddrc_phy_num;
+ const u32 (*ddrc_phy_offset)[2];
+};
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx7.S), if this struct
+ * definition is changed, the offset definition in
+ * arch/arm/mach-imx/suspend-imx7.S must be also changed accordingly,
+ * otherwise, the suspend to ocram function will be broken!
+ */
+
+struct imx7_cpu_pm_info {
+ u32 m4_reserve0;
+ u32 m4_reserve1;
+ u32 m4_reserve2;
+
+ /* The physical address of pm_info. */
+ phys_addr_t pbase;
+
+ /* The physical resume address for asm code */
+ phys_addr_t resume_addr;
+ u32 ddr_type;
+
+ u32 pm_info_size;
+
+ struct imx7_pm_base ddrc_base;
+ struct imx7_pm_base ddrc_phy_base;
+ struct imx7_pm_base src_base;
+ struct imx7_pm_base iomuxc_gpr_base;
+ struct imx7_pm_base ccm_base;
+ struct imx7_pm_base gpc_base;
+ struct imx7_pm_base l2_base;
+ struct imx7_pm_base anatop_base;
+
+ u32 ttbr1;
+
+ /* Number of DDRC which need saved/restored. */
+ u32 ddrc_num;
+
+ /* To save offset and value */
+ u32 ddrc_val[MX7_MAX_DDRC_NUM][2];
+
+ /* Number of DDRC which need saved/restored. */
+ u32 ddrc_phy_num;
+
+ /* To save offset and value */
+ u32 ddrc_phy_val[MX7_MAX_DDRC_NUM][2];
+} __aligned(8);
+
+static const u32 imx7d_ddrc_ddr3_setting[][2] __initconst = {
+ { 0x0, READ_DATA_FROM_HARDWARE },
+ { 0x1a0, READ_DATA_FROM_HARDWARE },
+ { 0x1a4, READ_DATA_FROM_HARDWARE },
+ { 0x1a8, READ_DATA_FROM_HARDWARE },
+ { 0x64, READ_DATA_FROM_HARDWARE },
+ { 0x490, 0x00000001 },
+ { 0xd0, 0xc0020001 },
+ { 0xd4, READ_DATA_FROM_HARDWARE },
+ { 0xdc, READ_DATA_FROM_HARDWARE },
+ { 0xe0, READ_DATA_FROM_HARDWARE },
+ { 0xe4, READ_DATA_FROM_HARDWARE },
+ { 0xf4, READ_DATA_FROM_HARDWARE },
+ { 0x100, READ_DATA_FROM_HARDWARE },
+ { 0x104, READ_DATA_FROM_HARDWARE },
+ { 0x108, READ_DATA_FROM_HARDWARE },
+ { 0x10c, READ_DATA_FROM_HARDWARE },
+ { 0x110, READ_DATA_FROM_HARDWARE },
+ { 0x114, READ_DATA_FROM_HARDWARE },
+ { 0x120, 0x03030803 },
+ { 0x180, READ_DATA_FROM_HARDWARE },
+ { 0x190, READ_DATA_FROM_HARDWARE },
+ { 0x194, READ_DATA_FROM_HARDWARE },
+ { 0x200, READ_DATA_FROM_HARDWARE },
+ { 0x204, READ_DATA_FROM_HARDWARE },
+ { 0x214, READ_DATA_FROM_HARDWARE },
+ { 0x218, READ_DATA_FROM_HARDWARE },
+ { 0x240, 0x06000601 },
+ { 0x244, READ_DATA_FROM_HARDWARE },
+};
+
+static const u32 imx7d_ddrc_phy_ddr3_setting[][2] __initconst = {
+ { 0x0, READ_DATA_FROM_HARDWARE },
+ { 0x4, READ_DATA_FROM_HARDWARE },
+ { 0x10, READ_DATA_FROM_HARDWARE },
+ { 0x9c, READ_DATA_FROM_HARDWARE },
+ { 0x20, READ_DATA_FROM_HARDWARE },
+ { 0x30, READ_DATA_FROM_HARDWARE },
+ { 0x50, 0x01000010 },
+ { 0x50, 0x00000010 },
+ { 0xc0, 0x0e407304 },
+ { 0xc0, 0x0e447304 },
+ { 0xc0, 0x0e447306 },
+ { 0xc0, 0x0e447304 },
+ { 0xc0, 0x0e407306 },
+};
+
+static const struct imx7_pm_socdata imx7d_pm_data_ddr3 __initconst = {
+ .iomuxc_gpr_compat = "fsl,imx7d-iomuxc",
+ .ddrc_phy_compat = "fsl,imx7d-ddrc-phy",
+ .anatop_compat = "fsl,imx7d-anatop",
+ .ddrc_compat = "fsl,imx7d-ddrc",
+ .ccm_compat = "fsl,imx7d-ccm",
+ .src_compat = "fsl,imx7d-src",
+ .gpc_compat = "fsl,imx7d-gpc",
+ .ddrc_phy_num = ARRAY_SIZE(imx7d_ddrc_phy_ddr3_setting),
+ .ddrc_phy_offset = imx7d_ddrc_phy_ddr3_setting,
+ .ddrc_num = ARRAY_SIZE(imx7d_ddrc_ddr3_setting),
+ .ddrc_offset = imx7d_ddrc_ddr3_setting,
+};
+
+static struct imx_gpcv2 *gpcv2_instance;
+
+static void imx_gpcv2_lpm_clear_slots(struct imx_gpcv2 *gpc)
+{
+ int i;
+
+ for (i = 0; i < GPC_MAX_SLOT_NUMBER; i++)
+ regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(i), 0x0);
+
+ regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7,
+ BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP |
+ BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
+}
+
+static void imx_gpcv2_lpm_enable_core(struct imx_gpcv2 *gpc,
+ bool enable, u32 offset)
+{
+ regmap_write(gpc->gpcv2, offset, enable);
+}
+
+static void imx_gpcv2_lpm_slot_setup(struct imx_gpcv2 *gpc,
+ u32 index, enum gpcv2_slot slot, bool powerup)
+{
+ u32 val;
+
+ if (index >= GPC_MAX_SLOT_NUMBER) {
+ pr_err("Invalid slot index!\n");
+ return;
+ }
+
+ val = (powerup ? 0x2 : 0x1) << (slot * 2);
+ regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(index), val);
+}
+
+static void imx_gpcv2_lpm_set_ack(struct imx_gpcv2 *gpc,
+ enum gpcv2_slot slot, bool powerup)
+{
+ u32 val;
+
+ regmap_read(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, &val);
+
+ /* clear dummy ack */
+ val &= ~(powerup ? BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP :
+ BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
+
+ val |= 1 << (slot + (powerup ? 16 : 0));
+ regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, val);
+}
+
+static void imx_gpcv2_lpm_env_setup(struct imx_gpcv2 *gpc)
+{
+ /* PLL and PFDs overwrite set */
+ regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_SET,
+ BM_ANADIG_ARM_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_SET,
+ BM_ANADIG_DDR_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_SET,
+ BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_SET,
+ BM_ANADIG_ENET_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_SET,
+ BM_ANADIG_AUDIO_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_SET,
+ BM_ANADIG_VIDEO_PLL_OVERRIDE);
+}
+
+static void imx_gpcv2_lpm_env_clean(struct imx_gpcv2 *gpc)
+{
+ /* PLL and PFDs overwrite clear */
+ regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_CLR,
+ BM_ANADIG_ARM_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_CLR,
+ BM_ANADIG_DDR_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_CLR,
+ BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_CLR,
+ BM_ANADIG_ENET_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_CLR,
+ BM_ANADIG_AUDIO_PLL_OVERRIDE);
+ regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_CLR,
+ BM_ANADIG_VIDEO_PLL_OVERRIDE);
+}
+
+static void imx_gpcv2_lpm_set_mode(struct imx_gpcv2 *gpc,
+ enum gpcv2_mode mode)
+{
+ u32 lpcr, slpcr;
+
+ regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &lpcr);
+ regmap_read(gpc->gpcv2, GPC_SLPCR, &slpcr);
+
+ /* all cores' LPM settings must be same */
+ lpcr &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
+ lpcr |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+
+ slpcr &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN |
+ BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
+
+ switch (mode) {
+ case GPC_WAIT_CLOCKED:
+ break;
+ case GPC_WAIT_UNCLOCKED:
+ lpcr |= A7_LPM_WAIT;
+ lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ break;
+ case GPC_STOP_POWER_ON:
+ lpcr |= A7_LPM_STOP;
+ lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
+ BM_SLPCR_BYPASS_PMIC_READY);
+ break;
+ case GPC_STOP_POWER_OFF:
+ lpcr |= A7_LPM_STOP;
+ lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
+ slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
+ BM_SLPCR_SBYOS | BM_SLPCR_VSTBY |
+ BM_SLPCR_BYPASS_PMIC_READY);
+ break;
+ default:
+ return;
+ }
+ regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, lpcr);
+ regmap_write(gpc->gpcv2, GPC_SLPCR, slpcr);
+}
+
+static void imx_gpcv2_lpm_cpu_power_gate(struct imx_gpcv2 *gpc,
+ u32 cpu, bool engate)
+{
+ u32 val;
+
+ const u32 val_pdn[2] = {
+ BM_LPCR_A7_AD_EN_C0_PDN | BM_LPCR_A7_AD_EN_C0_PUP,
+ BM_LPCR_A7_AD_EN_C1_PDN | BM_LPCR_A7_AD_EN_C1_PUP,
+ };
+
+ regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
+ if (engate)
+ val |= val_pdn[cpu];
+ else
+ val &= ~val_pdn[cpu];
+
+ regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val);
+}
+
+static void imx_lpm_plat_power_gate(struct imx_gpcv2 *gpc, bool engate)
+{
+ u32 val;
+
+ regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
+ val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
+ if (engate)
+ val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
+
+ regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val);
+}
+
+static void imx_gpcv2_lpm_standby(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_suspend *pm = gpc->pm;
+
+ pm->lpm_env_setup(gpc);
+ /* pm->set_mode(gpc, GPC_STOP_POWER_OFF); */
+ pm->set_mode(gpc, GPC_WAIT_UNCLOCKED);
+
+ /* Zzz ... */
+ cpu_do_idle();
+
+ pm->set_mode(gpc, GPC_WAIT_CLOCKED);
+ pm->lpm_env_clean(gpc);
+}
+
+static int gpcv2_suspend_finish(unsigned long val)
+{
+ struct imx_gpcv2_suspend *pm = (struct imx_gpcv2_suspend *)val;
+
+ if (!pm->suspend_fn_in_ocram) {
+ cpu_do_idle();
+ } else {
+ /*
+ * call low level suspend function in ocram,
+ * as we need to float DDR IO.
+ */
+ local_flush_tlb_all();
+ pm->suspend_fn_in_ocram(pm->ocram_vbase);
+ }
+
+ return 0;
+}
+
+static void imx_gpcv2_lpm_suspend(struct imx_gpcv2 *gpc)
+{
+ struct imx_gpcv2_suspend *pm = gpc->pm;
+ u32 *sources;
+ int i, num;
+
+ pm->lpm_env_setup(gpc);
+ pm->set_mode(gpc, GPC_STOP_POWER_OFF);
+
+ /* enable core0 power down/up with low power mode */
+ pm->lpm_cpu_power_gate(gpc, 0, true);
+
+ /* enable plat power down with low power mode */
+ pm->lpm_plat_power_gate(gpc, true);
+
+ /*
+ * To avoid confuse, we use slot 0~4 for power down,
+ * slot 5~9 for power up.
+ *
+ * Power down slot sequence:
+ * Slot0 -> CORE0
+ * Slot1 -> Mega/Fast MIX
+ * Slot2 -> SCU
+ *
+ * Power up slot sequence:
+ * Slot5 -> Mega/Fast MIX
+ * Slot6 -> SCU
+ * Slot7 -> CORE0
+ */
+ pm->set_slot(gpc, 0, CORE0_A7, false);
+ pm->set_slot(gpc, 2, SCU_A7, false);
+
+ if (gpc->get_wakeup_source) {
+ pm->set_slot(gpc, 1, FAST_MEGA_MIX, false);
+ pm->set_slot(gpc, 5, FAST_MEGA_MIX, true);
+ pm->lpm_enable_core(gpc, true, GPC_PGC_FM);
+ num = gpc->get_wakeup_source(&sources);
+ for (i = 0; i < num; i++) {
+ if ((~sources[i] & gpc->mfmix_mask[i]) == 0)
+ continue;
+ pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
+ break;
+ }
+ }
+
+ pm->set_slot(gpc, 6, SCU_A7, true);
+ pm->set_slot(gpc, 7, CORE0_A7, true);
+
+ /* Set Power down act */
+ pm->set_act(gpc, SCU_A7, false);
+
+ /* Set Power up act */
+ pm->set_act(gpc, CORE0_A7, true);
+
+ /* enable core0, scu */
+ pm->lpm_enable_core(gpc, true, GPC_PGC_C0);
+ pm->lpm_enable_core(gpc, true, GPC_PGC_SCU);
+
+ cpu_suspend((unsigned long)pm, gpcv2_suspend_finish);
+
+ pm->lpm_env_clean(gpc);
+ pm->set_mode(gpc, GPC_WAIT_CLOCKED);
+ pm->lpm_cpu_power_gate(gpc, 0, false);
+ pm->lpm_plat_power_gate(gpc, false);
+
+ pm->lpm_enable_core(gpc, false, GPC_PGC_C0);
+ pm->lpm_enable_core(gpc, false, GPC_PGC_SCU);
+ pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
+ pm->clear_slots(gpc);
+}
+
+static int imx_gpcv2_pm_enter(suspend_state_t state)
+{
+ struct imx_gpcv2_suspend *pm;
+
+ BUG_ON(!gpcv2_instance);
+ pm = gpcv2_instance->pm;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pm->standby(gpcv2_instance);
+ break;
+
+ case PM_SUSPEND_MEM:
+ pm->suspend(gpcv2_instance);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int imx_gpcv2_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static int __init imx_get_base_from_node(struct device_node *node,
+ struct imx7_pm_base *base)
+{
+ struct resource res;
+ int ret = 0;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = ioremap(res.start, resource_size(&res));
+ if (!base->vbase) {
+ iounmap(base->vbase);
+ ret = -ENOMEM;
+ }
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static int __init imx_get_base_from_dt(struct imx7_pm_base *base,
+ const char *compat)
+{
+ struct device_node *node;
+ struct resource res;
+ int ret = 0;
+
+ node = of_find_compatible_node(NULL, NULL, compat);
+ if (!node) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = ioremap(res.start, resource_size(&res));
+ if (!base->vbase)
+ ret = -ENOMEM;
+
+put_node:
+ of_node_put(node);
+out:
+ return ret;
+}
+
+static int __init imx_get_exec_base_from_dt(struct imx7_pm_base *base,
+ const char *compat)
+{
+ struct device_node *node;
+ struct resource res;
+ int ret = 0;
+
+ node = of_find_compatible_node(NULL, NULL, compat);
+ if (!node) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ goto put_node;
+
+ base->pbase = res.start;
+ base->vbase = __arm_ioremap_exec(res.start, resource_size(&res), false);
+
+ if (!base->vbase)
+ ret = -ENOMEM;
+
+put_node:
+ of_node_put(node);
+out:
+ return ret;
+}
+
+static int __init imx_gpcv2_suspend_init(struct imx_gpcv2_suspend *pm,
+ const struct imx7_pm_socdata *socdata)
+{
+ struct imx7_pm_base aips_base[3] = { {0, 0}, {0, 0}, {0, 0} };
+ struct imx7_pm_base sram_base = {0, 0};
+ struct imx7_cpu_pm_info *pm_info;
+ struct device_node *node = NULL;
+ int i, ret = 0;
+
+ const u32 (*ddrc_phy_offset_array)[2];
+ const u32 (*ddrc_offset_array)[2];
+
+ if (!socdata || !pm) {
+ pr_warn("%s: invalid argument!\n", __func__);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 3; i++) {
+ node = of_find_compatible_node(node, NULL, "fsl,aips-bus");
+ if (!node) {
+ pr_warn("%s: failed to find aips %d node!\n",
+ __func__, i);
+ break;
+ }
+ ret = imx_get_base_from_node(node, &aips_base[i]);
+ if (ret) {
+ pr_warn("%s: failed to get aips[%d] base %d!\n",
+ __func__, i, ret);
+ }
+ }
+
+ ret = imx_get_exec_base_from_dt(&sram_base, "fsl,lpm-sram");
+ if (ret) {
+ pr_warn("%s: failed to get lpm-sram base %d!\n",
+ __func__, ret);
+ goto lpm_sram_map_failed;
+ }
+
+ pm_info = sram_base.vbase;
+ pm_info->pbase = sram_base.pbase;
+ pm_info->resume_addr = virt_to_phys(ca7_cpu_resume);
+ pm_info->pm_info_size = sizeof(*pm_info);
+
+ ret = imx_get_base_from_dt(&pm_info->ccm_base, socdata->ccm_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
+ goto ccm_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->ddrc_base, socdata->ddrc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ddrc base %d!\n", __func__, ret);
+ goto ddrc_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->ddrc_phy_base,
+ socdata->ddrc_phy_compat);
+ if (ret) {
+ pr_warn("%s: failed to get ddrc_phy base %d!\n", __func__, ret);
+ goto ddrc_phy_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->src_base, socdata->src_compat);
+ if (ret) {
+ pr_warn("%s: failed to get src base %d!\n", __func__, ret);
+ goto src_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->iomuxc_gpr_base,
+ socdata->iomuxc_gpr_compat);
+ if (ret) {
+ pr_warn("%s: failed to get iomuxc_gpr base %d!\n",
+ __func__, ret);
+ goto iomuxc_gpr_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->gpc_base, socdata->gpc_compat);
+ if (ret) {
+ pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
+ goto gpc_map_failed;
+ }
+
+ ret = imx_get_base_from_dt(&pm_info->anatop_base,
+ socdata->anatop_compat);
+ if (ret) {
+ pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
+ goto anatop_map_failed;
+ }
+
+ pm_info->ddrc_num = socdata->ddrc_num;
+ ddrc_offset_array = socdata->ddrc_offset;
+ pm_info->ddrc_phy_num = socdata->ddrc_phy_num;
+ ddrc_phy_offset_array = socdata->ddrc_phy_offset;
+
+ /* initialize DDRC settings */
+ for (i = 0; i < pm_info->ddrc_num; i++) {
+ pm_info->ddrc_val[i][0] = ddrc_offset_array[i][0];
+ if (ddrc_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
+ pm_info->ddrc_val[i][1] =
+ readl_relaxed(pm_info->ddrc_base.vbase +
+ ddrc_offset_array[i][0]);
+ else
+ pm_info->ddrc_val[i][1] = ddrc_offset_array[i][1];
+ }
+
+ /* initialize DDRC PHY settings */
+ for (i = 0; i < pm_info->ddrc_phy_num; i++) {
+ pm_info->ddrc_phy_val[i][0] =
+ ddrc_phy_offset_array[i][0];
+ if (ddrc_phy_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
+ pm_info->ddrc_phy_val[i][1] =
+ readl_relaxed(pm_info->ddrc_phy_base.vbase +
+ ddrc_phy_offset_array[i][0]);
+ else
+ pm_info->ddrc_phy_val[i][1] =
+ ddrc_phy_offset_array[i][1];
+ }
+
+ pm->suspend_fn_in_ocram = fncpy(
+ sram_base.vbase + sizeof(*pm_info),
+ &imx7_suspend,
+ MX7_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
+ pm->ocram_vbase = sram_base.vbase;
+
+ goto put_node;
+
+anatop_map_failed:
+ iounmap(pm_info->anatop_base.vbase);
+gpc_map_failed:
+ iounmap(pm_info->gpc_base.vbase);
+iomuxc_gpr_map_failed:
+ iounmap(pm_info->iomuxc_gpr_base.vbase);
+src_map_failed:
+ iounmap(pm_info->src_base.vbase);
+ddrc_phy_map_failed:
+ iounmap(pm_info->ddrc_phy_base.vbase);
+ddrc_map_failed:
+ iounmap(pm_info->ddrc_base.vbase);
+ccm_map_failed:
+ iounmap(pm_info->ccm_base.vbase);
+lpm_sram_map_failed:
+ iounmap(sram_base.vbase);
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static const struct platform_suspend_ops imx_gpcv2_pm_ops = {
+ .enter = imx_gpcv2_pm_enter,
+ .valid = imx_gpcv2_pm_valid,
+};
+
+static int __init imx_gpcv2_pm_init(void)
+{
+ struct imx_gpcv2_suspend *pm;
+ struct imx_gpcv2 *gpc;
+ int val, num;
+
+ pm = kzalloc(sizeof(struct imx_gpcv2_suspend), GFP_KERNEL);
+ if (!pm) {
+ pr_warn("[GPCv2] %s init failed\r\n", __func__);
+ return -ENOMEM;
+ }
+
+ gpc = kzalloc(sizeof(struct imx_gpcv2), GFP_KERNEL);
+ if (!gpc) {
+ pr_warn("[GPCv2] %s init failed\r\n", __func__);
+ kfree(pm);
+ return -ENOMEM;
+ }
+
+ imx_gpcv2_suspend_init(pm, &imx7d_pm_data_ddr3);
+
+ pm->lpm_env_setup = imx_gpcv2_lpm_env_setup;
+ pm->lpm_env_clean = imx_gpcv2_lpm_env_clean;
+
+ pm->lpm_cpu_power_gate = imx_gpcv2_lpm_cpu_power_gate;
+ pm->lpm_plat_power_gate = imx_lpm_plat_power_gate;
+ pm->lpm_enable_core = imx_gpcv2_lpm_enable_core;
+ pm->set_mode = imx_gpcv2_lpm_set_mode;
+
+ pm->clear_slots = imx_gpcv2_lpm_clear_slots;
+ pm->set_slot = imx_gpcv2_lpm_slot_setup;
+ pm->set_act = imx_gpcv2_lpm_set_ack;
+
+ pm->standby = imx_gpcv2_lpm_standby;
+ pm->suspend = imx_gpcv2_lpm_suspend;
+
+ gpc->anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+ if (IS_ERR(gpc->anatop))
+ goto error_exit;
+
+ gpc->gpcv2 = syscon_regmap_lookup_by_compatible("fsl,imx7d-gpc");
+ if (IS_ERR(gpc->gpcv2))
+ goto error_exit;
+
+ /* only external IRQs to wake up LPM and core 0/1 */
+ regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &val);
+ val |= BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP;
+ regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, val);
+ /* mask m4 dsm trigger */
+ regmap_read(gpc->gpcv2, GPC_LPCR_M4, &val);
+ val |= BM_LPCR_M4_MASK_DSM_TRIGGER;
+ regmap_write(gpc->gpcv2, GPC_LPCR_M4, val);
+
+ /* set mega/fast mix in A7 domain */
+ regmap_write(gpc->gpcv2, GPC_PGC_CPU_MAPPING, 0x1);
+ /* set SCU timing */
+ val = (0x59 << 10) | 0x5B | (0x51 << 20);
+ regmap_write(gpc->gpcv2, GPC_PGC_SCU_TIMING, val);
+
+ gpc->pm = pm;
+ gpc->get_wakeup_source = imx_gpcv2_get_wakeup_source;
+ gpcv2_instance = gpc;
+
+ num = imx_gpcv2_get_wakeup_source(0);
+
+ /*
+ * The IP blocks which may be the wakeup sources are allocated into
+ * several power domains. MFMIX, LPSRMX, and WAKEUPMIX are three of
+ * those power domains. If a bit is '1' in the mask, it means the IP
+ * block is inside the power domain. The mask will be used to decide
+ * if a power domain should be shutdown or not when system goes into
+ * suspend states.
+ */
+
+ if (num)
+ gpc->wakeupmix_mask = kzalloc(sizeof(u32)*num*3, GFP_KERNEL);
+
+ if (!gpc->wakeupmix_mask)
+ goto error_exit;
+
+ /*
+ * Shutdown LPSRMIX and WAKEUP power domain has not been
+ * implemented in this patch yet.
+ */
+
+ gpc->lpsrmix_mask = gpc->wakeupmix_mask + num;
+ gpc->mfmix_mask = gpc->wakeupmix_mask + num*2;
+
+ /* Mask the wakeup sources in M/F power domain */
+ gpc->mfmix_mask[0] = 0x54010000;
+ gpc->mfmix_mask[1] = 0xC00;
+ gpc->mfmix_mask[2] = 0x0;
+ gpc->mfmix_mask[3] = 0x400010;
+
+ suspend_set_ops(&imx_gpcv2_pm_ops);
+ return 0;
+
+error_exit:
+ kfree(pm);
+ kfree(gpc);
+ return -ENODEV;
+}
+
+device_initcall(imx_gpcv2_pm_init);
diff --git a/arch/arm/mach-imx/suspend-imx7.S b/arch/arm/mach-imx/suspend-imx7.S
new file mode 100644
index 0000000..8c3f516
--- /dev/null
+++ b/arch/arm/mach-imx/suspend-imx7.S
@@ -0,0 +1,529 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include "hardware.h"
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * Better to follow below rules to use ARM registers:
+ * r0: pm_info structure address;
+ * r1 ~ r4: for saving pm_info members;
+ * r5 ~ r10: free registers;
+ * r11: io base address.
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ * .
+ * .
+ * .
+ * ^
+ * ^
+ * ^
+ * imx7_suspend code
+ * PM_INFO structure(imx7_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+/*
+ * Below offsets are based on struct imx7_cpu_pm_info
+ * which defined in arch/arm/mach-imx/pm-imx7.c, this
+ * structure contains necessary pm info for low level
+ * suspend related code.
+ */
+#define PM_INFO_M4_RESERVE0_OFFSET 0x0
+#define PM_INFO_M4_RESERVE1_OFFSET 0x4
+#define PM_INFO_M4_RESERVE2_OFFSET 0x8
+#define PM_INFO_PBASE_OFFSET 0xc
+#define PM_INFO_RESUME_ADDR_OFFSET 0x10
+#define PM_INFO_DDR_TYPE_OFFSET 0x14
+#define PM_INFO_PM_INFO_SIZE_OFFSET 0x18
+#define PM_INFO_MX7_DDRC_P_OFFSET 0x1c
+#define PM_INFO_MX7_DDRC_V_OFFSET 0x20
+#define PM_INFO_MX7_DDRC_PHY_P_OFFSET 0x24
+#define PM_INFO_MX7_DDRC_PHY_V_OFFSET 0x28
+#define PM_INFO_MX7_SRC_P_OFFSET 0x2c
+#define PM_INFO_MX7_SRC_V_OFFSET 0x30
+#define PM_INFO_MX7_IOMUXC_GPR_P_OFFSET 0x34
+#define PM_INFO_MX7_IOMUXC_GPR_V_OFFSET 0x38
+#define PM_INFO_MX7_CCM_P_OFFSET 0x3c
+#define PM_INFO_MX7_CCM_V_OFFSET 0x40
+#define PM_INFO_MX7_GPC_P_OFFSET 0x44
+#define PM_INFO_MX7_GPC_V_OFFSET 0x48
+#define PM_INFO_MX7_L2_P_OFFSET 0x4c
+#define PM_INFO_MX7_L2_V_OFFSET 0x50
+#define PM_INFO_MX7_ANATOP_P_OFFSET 0x54
+#define PM_INFO_MX7_ANATOP_V_OFFSET 0x58
+#define PM_INFO_MX7_TTBR1_V_OFFSET 0x5c
+#define PM_INFO_DDRC_REG_NUM_OFFSET 0x60
+#define PM_INFO_DDRC_REG_OFFSET 0x64
+#define PM_INFO_DDRC_VALUE_OFFSET 0x68
+#define PM_INFO_DDRC_PHY_REG_NUM_OFFSET 0x164
+#define PM_INFO_DDRC_PHY_REG_OFFSET 0x168
+#define PM_INFO_DDRC_PHY_VALUE_OFFSET 0x16c
+
+#define MX7_SRC_GPR1 0x74
+#define MX7_SRC_GPR2 0x78
+#define GPC_PGC_FM 0xa00
+#define ANADIG_SNVS_MISC_CTRL 0x380
+#define DDRC_STAT 0x4
+#define DDRC_PWRCTL 0x30
+#define DDRC_PSTAT 0x3fc
+#define DDRC_PCTRL_0 0x490
+#define DDRC_DFIMISC 0x1b0
+#define DDRC_SWCTL 0x320
+#define DDRC_SWSTAT 0x324
+#define DDRPHY_LP_CON0 0x18
+
+ .align 3
+
+ .macro disable_l1_dcache
+
+ /*
+ * Flush all data from the L1 data cache before disabling
+ * SCTLR.C bit.
+ */
+ push {r0 - r10, lr}
+ ldr r7, =v7_flush_dcache_all
+ mov lr, pc
+ mov pc, r7
+ pop {r0 - r10, lr}
+
+ /* disable d-cache */
+ mrc p15, 0, r7, c1, c0, 0
+ bic r7, r7, #(1 << 2)
+ mcr p15, 0, r7, c1, c0, 0
+ dsb
+ isb
+
+ push {r0 - r10, lr}
+ ldr r7, =v7_flush_dcache_all
+ mov lr, pc
+ mov pc, r7
+ pop {r0 - r10, lr}
+
+ .endm
+
+
+ .macro enable_l1_dcache
+
+ /* Enable L1 data cache. */
+ mrc p15, 0, r6, c1, c0, 0
+ orr r6, r6, #0x4
+ mcr p15, 0, r6, c1, c0, 0
+
+ dsb
+ isb
+
+ .endm
+
+
+ .macro ddrc_enter_self_refresh
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait rw port_busy clear */
+ ldr r6, =(0x1 << 16)
+ orr r6, r6, #0x1
+1:
+ ldr r7, [r11, #DDRC_PSTAT]
+ ands r7, r7, r6
+ bne 1b
+
+ /* enter self-refresh bit 5 */
+ ldr r7, =(0x1 << 5)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+2:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 2b
+3:
+ ldr r7, [r11, #DDRC_STAT]
+ ands r7, r7, #0x20
+ beq 3b
+
+ /* disable dram clk */
+ ldr r7, [r11, #DDRC_PWRCTL]
+ orr r7, r7, #(1 << 3)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ .endm
+
+ .macro ddrc_exit_self_refresh
+
+ cmp r5, #0x0
+ ldreq r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldrne r11, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+4:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ beq 4b
+
+ /* enable auto self-refresh */
+ ldr r7, [r11, #DDRC_PWRCTL]
+ orr r7, r7, #(1 << 0)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ .endm
+
+ .macro wait_delay
+5:
+ subs r6, r6, #0x1
+ bne 5b
+
+ .endm
+
+ .macro ddr_enter_retention
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r11, #DDRC_PCTRL_0]
+
+ /* wait rw port_busy clear */
+ ldr r6, =(0x1 << 16)
+ orr r6, r6, #0x1
+6:
+ ldr r7, [r11, #DDRC_PSTAT]
+ ands r7, r7, r6
+ bne 6b
+
+ ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ /* enter self-refresh bit 5 */
+ ldr r7, =(0x1 << 5)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* wait until self-refresh mode entered */
+7:
+ ldr r7, [r11, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 7b
+8:
+ ldr r7, [r11, #DDRC_STAT]
+ ands r7, r7, #0x20
+ beq 8b
+
+ /* disable dram clk */
+ ldr r7, =(0x1 << 5)
+ orr r7, r7, #(1 << 3)
+ str r7, [r11, #DDRC_PWRCTL]
+
+ /* reset ddr_phy */
+ ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, =0x0
+ str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
+
+ /* delay 7 us */
+ ldr r6, =6000
+ wait_delay
+
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldr r6, =0x1000
+ ldr r7, [r11, r6]
+ orr r7, r7, #0x1
+ str r7, [r11, r6]
+ /* turn off ddr power */
+ ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, =(0x1 << 29)
+ str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
+
+ .endm
+
+ .macro ddr_exit_retention
+
+ cmp r5, #0x0
+ ldreq r1, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldrne r1, [r0, #PM_INFO_MX7_ANATOP_P_OFFSET]
+ ldreq r2, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldrne r2, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
+ ldreq r3, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldrne r3, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
+ ldreq r4, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
+ ldrne r4, [r0, #PM_INFO_MX7_DDRC_PHY_P_OFFSET]
+ ldreq r10, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
+ ldrne r10, [r0, #PM_INFO_MX7_CCM_P_OFFSET]
+ ldreq r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldrne r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_P_OFFSET]
+
+ /* turn on ddr power */
+ ldr r7, =(0x1 << 29)
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ ldr r6, =50
+ wait_delay
+
+ ldr r7, =0x0
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ /* clear ddr_phy reset */
+ ldr r6, =0x1000
+ ldr r7, [r2, r6]
+ orr r7, r7, #0x3
+ str r7, [r2, r6]
+ ldr r7, [r2, r6]
+ bic r7, r7, #0x1
+ str r7, [r2, r6]
+
+ ldr r6, [r0, #PM_INFO_DDRC_REG_NUM_OFFSET]
+ ldr r7, =PM_INFO_DDRC_REG_OFFSET
+ add r7, r7, r0
+9:
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ str r9, [r3, r8]
+ subs r6, r6, #0x1
+ bne 9b
+ ldr r7, =0x20
+ str r7, [r3, #DDRC_PWRCTL]
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_DFIMISC]
+
+ /* do PHY, clear ddr_phy reset */
+ ldr r6, =0x1000
+ ldr r7, [r2, r6]
+ bic r7, r7, #0x2
+ str r7, [r2, r6]
+
+ ldr r7, =(0x1 << 30)
+ str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
+
+ /* need to delay ~5mS */
+ ldr r6, =0x100000
+ wait_delay
+
+ ldr r6, [r0, #PM_INFO_DDRC_PHY_REG_NUM_OFFSET]
+ ldr r7, =PM_INFO_DDRC_PHY_REG_OFFSET
+ add r7, r7, r0
+
+10:
+ ldr r8, [r7], #0x4
+ ldr r9, [r7], #0x4
+ str r9, [r4, r8]
+ subs r6, r6, #0x1
+ bne 10b
+
+ ldr r7, =0x0
+ add r9, r10, #0x4000
+ str r7, [r9, #0x130]
+
+ cmp r5, #0x0
+ beq 101f
+ ldr r7, =0x170
+ orr r7, r7, #0x8
+ str r7, [r11, #0x20]
+
+101:
+ ldr r7, =0x2
+ add r9, r10, #0x4000
+ str r7, [r9, #0x130]
+
+ ldr r7, =0xf
+ str r7, [r4, #DDRPHY_LP_CON0]
+
+ /* wait until self-refresh mode entered */
+11:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x3
+ bne 11b
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_SWCTL]
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_DFIMISC]
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_SWCTL]
+12:
+ ldr r7, [r3, #DDRC_SWSTAT]
+ and r7, r7, #0x1
+ cmp r7, #0x1
+ bne 12b
+13:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x20
+ cmp r7, #0x20
+ bne 13b
+
+ /* let DDR out of self-refresh */
+ ldr r7, =0x0
+ str r7, [r3, #DDRC_PWRCTL]
+14:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x30
+ cmp r7, #0x0
+ bne 14b
+
+15:
+ ldr r7, [r3, #DDRC_STAT]
+ and r7, r7, #0x3
+ cmp r7, #0x1
+ bne 15b
+
+ /* enable port */
+ ldr r7, =0x1
+ str r7, [r3, #DDRC_PCTRL_0]
+
+ .endm
+
+ENTRY(imx7_suspend)
+ push {r4-r12}
+
+ /*
+ * The value of r0 is mapped the same in origin table and IRAM table,
+ * thus no need to care r0 here.
+ */
+ ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
+ ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+ ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
+ ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
+
+ /*
+ * counting the resume address in iram
+ * to set it in SRC register.
+ */
+ ldr r6, =imx7_suspend
+ ldr r7, =resume
+ sub r7, r7, r6
+ add r8, r1, r4
+ add r9, r8, r7
+
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ /* store physical resume addr and pm_info address. */
+ str r9, [r11, #MX7_SRC_GPR1]
+ str r1, [r11, #MX7_SRC_GPR2]
+
+ disable_l1_dcache
+
+ /*
+ * make sure TLB contain the addr we want,
+ * as we will access them after DDR is in
+ * self-refresh mode.
+ */
+ ldr r6, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldr r7, [r0, #0x0]
+ ldr r6, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
+ add r6, #0x4000
+ ldr r7, [r6]
+ ldr r6, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ ldr r6, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ add r6, #0x1000
+ ldr r7, [r6]
+ ldr r6, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
+ ldr r7, [r6, #0x0]
+ ldr r7, [r6, #0x490]
+ ldr r6, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
+ ldr r7, [r6, #0x0]
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq ddr_only_self_refresh
+
+ ddr_enter_retention
+ b ddr_retention_enter_out
+ddr_only_self_refresh:
+ ddrc_enter_self_refresh
+ddr_retention_enter_out:
+
+ /* Zzz, enter stop mode */
+ wfi
+ nop
+ nop
+ nop
+ nop
+
+ mov r5, #0x0
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq wfi_ddr_self_refresh_out
+
+ ddr_exit_retention
+ b wfi_ddr_retention_out
+wfi_ddr_self_refresh_out:
+ ddrc_exit_self_refresh
+wfi_ddr_retention_out:
+
+ ldr r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
+ ldr r7, =0x170
+ orr r7, r7, #0x8
+ str r7, [r11, #0x20]
+
+ /* clear core0's entry and parameter */
+ ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
+ mov r7, #0x0
+ str r7, [r11, #MX7_SRC_GPR1]
+ str r7, [r11, #MX7_SRC_GPR2]
+
+ enable_l1_dcache
+
+ pop {r4-r12}
+ /* return to suspend finish */
+ mov pc, lr
+
+resume:
+ /* invalidate L1 I-cache first */
+ mov r6, #0x0
+ mcr p15, 0, r6, c7, c5, 0
+ mcr p15, 0, r6, c7, c5, 6
+ /* enable the Icache and branch prediction */
+ mov r6, #0x1800
+ mcr p15, 0, r6, c1, c0, 0
+ isb
+
+ /* get physical resume address from pm_info. */
+ ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+ /* clear core0's entry and parameter */
+ ldr r11, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
+ mov r7, #0x0
+ str r7, [r11, #MX7_SRC_GPR1]
+ str r7, [r11, #MX7_SRC_GPR2]
+
+ mov r5, #0x1
+
+ ldr r11, [r0, #PM_INFO_MX7_GPC_P_OFFSET]
+ ldr r7, [r11, #GPC_PGC_FM]
+ cmp r7, #0
+ beq dsm_ddr_self_refresh_out
+
+ ddr_exit_retention
+ b dsm_ddr_retention_out
+dsm_ddr_self_refresh_out:
+ ddrc_exit_self_refresh
+dsm_ddr_retention_out:
+
+ mov pc, lr
+ENDPROC(imx7_suspend)
+
+ENTRY(ca7_cpu_resume)
+ bl v7_invalidate_l1
+ b cpu_resume
+ENDPROC(ca7_cpu_resume)
--
2.5.0.rc2
^ permalink raw reply related [flat|nested] 36+ messages in thread
* RE: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
2015-07-31 21:33 ` Shenwei Wang
@ 2015-08-21 13:45 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-08-21 13:45 UTC (permalink / raw)
To: shawn.guo, tglx, jason; +Cc: linux-arm-kernel, linux-kernel, Huang Anson
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 10061 bytes --]
Ping.
Shenwei
> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org
> [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Shenwei Wang
> Sent: 2015Äê7ÔÂ31ÈÕ 16:34
> To: shawn.guo@linaro.org; tglx@linutronix.de; jason@lakedaemon.net
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Huang
> Yongcai-B20788
> Subject: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
>
> IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions:
> power management and wakeup source management.
> This patch adds a new irqchip driver to manage the interrupt wakeup sources on
> IMX7D.
> When the system is in WFI (wait for interrupt) mode, this GPC block will be the
> first block on the platform to be activated and signaled.
> Under normal wait mode during cpu idle, the system can be woke up by any
> enabled interrupts. Under standby or suspend mode, the system can only be
> woke up by the pre-defined wakeup sources.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
> ---
> drivers/irqchip/Kconfig | 7 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-imx-gpcv2.c | 273
> ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 281 insertions(+)
> create mode 100644 drivers/irqchip/irq-imx-gpcv2.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index
> 120d815..3fc0fac 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -177,3 +177,10 @@ config RENESAS_H8300H_INTC config
> RENESAS_H8S_INTC
> bool
> select IRQ_DOMAIN
> +
> +config IMX_GPCV2
> + bool
> + select IRQ_DOMAIN
> + help
> + Enables the wakeup IRQs for IMX platforms with GPCv2 block
> +
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index
> b8d4e96..8eb5f60 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -52,3 +52,4 @@ obj-$(CONFIG_RENESAS_H8300H_INTC) +=
> irq-renesas-h8300h.o
> obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
> obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
> obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
> +obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
> diff --git a/drivers/irqchip/irq-imx-gpcv2.c b/drivers/irqchip/irq-imx-gpcv2.c new
> file mode 100644 index 0000000..c2728b0
> --- /dev/null
> +++ b/drivers/irqchip/irq-imx-gpcv2.c
> @@ -0,0 +1,273 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/slab.h>
> +#include <linux/irqchip.h>
> +#include <linux/syscore_ops.h>
> +
> +#define IMR_NUM 4
> +#define GPC_MAX_IRQS (IMR_NUM * 32)
> +
> +#define GPC_IMR1_CORE0 0x30
> +#define GPC_IMR1_CORE1 0x40
> +
> +struct gpcv2_irqchip_data {
> + struct raw_spinlock rlock;
> + void __iomem *gpc_base;
> + u32 wakeup_sources[IMR_NUM];
> + u32 enabled_irqs[IMR_NUM];
> + u32 cpu2wakeup;
> +};
> +
> +static struct gpcv2_irqchip_data *imx_gpcv2_instance;
> +
> +u32 imx_gpcv2_get_wakeup_source(u32 **sources) {
> + if (!imx_gpcv2_instance)
> + return 0;
> +
> + if (sources)
> + *sources = imx_gpcv2_instance->wakeup_sources;
> +
> + return IMR_NUM;
> +}
> +
> +static int gpcv2_wakeup_source_save(void) {
> + struct gpcv2_irqchip_data *cd;
> + void __iomem *reg;
> + int i;
> +
> + cd = imx_gpcv2_instance;
> + if (!cd)
> + return 0;
> +
> + for (i = 0; i < IMR_NUM; i++) {
> + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> + cd->enabled_irqs[i] = readl_relaxed(reg);
> + writel_relaxed(cd->wakeup_sources[i], reg);
> + }
> +
> + return 0;
> +}
> +
> +static void gpcv2_wakeup_source_restore(void) {
> + struct gpcv2_irqchip_data *cd;
> + void __iomem *reg;
> + int i;
> +
> + cd = imx_gpcv2_instance;
> + if (!cd)
> + return;
> +
> + for (i = 0; i < IMR_NUM; i++) {
> + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> + writel_relaxed(cd->enabled_irqs[i], reg);
> + cd->wakeup_sources[i] = ~0;
> + }
> +}
> +
> +static struct syscore_ops imx_gpcv2_syscore_ops = {
> + .suspend = gpcv2_wakeup_source_save,
> + .resume = gpcv2_wakeup_source_restore,
> +};
> +
> +static int imx_gpcv2_irq_set_wake(struct irq_data *d, unsigned int on)
> +{
> + struct gpcv2_irqchip_data *cd = d->chip_data;
> + unsigned int idx = d->hwirq / 32;
> + unsigned long flags;
> + void __iomem *reg;
> + u32 mask, val;
> +
> + raw_spin_lock_irqsave(&cd->rlock, flags);
> + reg = cd->gpc_base + cd->cpu2wakeup + idx * 4;
> + mask = 1 << d->hwirq % 32;
> + val = cd->wakeup_sources[idx];
> +
> + cd->wakeup_sources[idx] = on ? (val & ~mask) : (val | mask);
> + raw_spin_unlock_irqrestore(&cd->rlock, flags);
> +
> + /*
> + * Do *not* call into the parent, as the GIC doesn't have any
> + * wake-up facility...
> + */
> +
> + return 0;
> +}
> +
> +static void imx_gpcv2_irq_unmask(struct irq_data *d) {
> + struct gpcv2_irqchip_data *cd = d->chip_data;
> + void __iomem *reg;
> + u32 val;
> +
> + raw_spin_lock(&cd->rlock);
> + reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
> + val = readl_relaxed(reg);
> + val &= ~(1 << d->hwirq % 32);
> + writel_relaxed(val, reg);
> + raw_spin_unlock(&cd->rlock);
> +
> + irq_chip_unmask_parent(d);
> +}
> +
> +static void imx_gpcv2_irq_mask(struct irq_data *d) {
> + struct gpcv2_irqchip_data *cd = d->chip_data;
> + void __iomem *reg;
> + u32 val;
> +
> + raw_spin_lock(&cd->rlock);
> + reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
> + val = readl_relaxed(reg);
> + val |= 1 << (d->hwirq % 32);
> + writel_relaxed(val, reg);
> + raw_spin_unlock(&cd->rlock);
> +
> + irq_chip_mask_parent(d);
> +}
> +
> +static struct irq_chip gpcv2_irqchip_data_chip = {
> + .name = "GPCv2",
> + .irq_eoi = irq_chip_eoi_parent,
> + .irq_mask = imx_gpcv2_irq_mask,
> + .irq_unmask = imx_gpcv2_irq_unmask,
> + .irq_set_wake = imx_gpcv2_irq_set_wake,
> + .irq_retrigger = irq_chip_retrigger_hierarchy,
> +#ifdef CONFIG_SMP
> + .irq_set_affinity = irq_chip_set_affinity_parent,
> +#endif
> +};
> +
> +static int imx_gpcv2_domain_xlate(struct irq_domain *domain,
> + struct device_node *controller,
> + const u32 *intspec,
> + unsigned int intsize,
> + unsigned long *out_hwirq,
> + unsigned int *out_type)
> +{
> + /* Shouldn't happen, really... */
> + if (domain->of_node != controller)
> + return -EINVAL;
> +
> + /* Not GIC compliant */
> + if (intsize != 3)
> + return -EINVAL;
> +
> + /* No PPI should point to this domain */
> + if (intspec[0] != 0)
> + return -EINVAL;
> +
> + *out_hwirq = intspec[1];
> + *out_type = intspec[2];
> + return 0;
> +}
> +
> +static int imx_gpcv2_domain_alloc(struct irq_domain *domain,
> + unsigned int irq, unsigned int nr_irqs,
> + void *data)
> +{
> + struct of_phandle_args *args = data;
> + struct of_phandle_args parent_args;
> + irq_hw_number_t hwirq;
> + int i;
> +
> + /* Not GIC compliant */
> + if (args->args_count != 3)
> + return -EINVAL;
> +
> + /* No PPI should point to this domain */
> + if (args->args[0] != 0)
> + return -EINVAL;
> +
> + /* Can't deal with this */
> + hwirq = args->args[1];
> + if (hwirq >= GPC_MAX_IRQS)
> + return -EINVAL;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
> + &gpcv2_irqchip_data_chip, domain->host_data);
> + }
> +
> + parent_args = *args;
> + parent_args.np = domain->parent->of_node;
> + return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs,
> +&parent_args); }
> +
> +static struct irq_domain_ops gpcv2_irqchip_data_domain_ops = {
> + .xlate = imx_gpcv2_domain_xlate,
> + .alloc = imx_gpcv2_domain_alloc,
> + .free = irq_domain_free_irqs_common,
> +};
> +
> +static int __init imx_gpcv2_irqchip_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct irq_domain *parent_domain, *domain;
> + struct gpcv2_irqchip_data *cd;
> + int i;
> +
> + if (!parent) {
> + pr_err("%s: no parent, giving up\n", node->full_name);
> + return -ENODEV;
> + }
> +
> + parent_domain = irq_find_host(parent);
> + if (!parent_domain) {
> + pr_err("%s: unable to get parent domain\n", node->full_name);
> + return -ENXIO;
> + }
> +
> + cd = kzalloc(sizeof(struct gpcv2_irqchip_data), GFP_KERNEL);
> + BUG_ON(!cd);
> +
> + cd->gpc_base = of_iomap(node, 0);
> + if (!cd->gpc_base) {
> + pr_err("fsl-gpcv2: unable to map gpc registers\n");
> + kfree(cd);
> + return -ENOMEM;
> + }
> +
> + domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
> + node, &gpcv2_irqchip_data_domain_ops, cd);
> + if (!domain) {
> + iounmap(cd->gpc_base);
> + kfree(cd);
> + return -ENOMEM;
> + }
> + irq_set_default_host(domain);
> +
> + /* Initially mask all interrupts */
> + for (i = 0; i < IMR_NUM; i++) {
> + writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE0 + i * 4);
> + writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE1 + i * 4);
> + cd->wakeup_sources[i] = ~0;
> + }
> +
> + /* Let CORE0 as the default CPU to wake up by GPC */
> + cd->cpu2wakeup = GPC_IMR1_CORE0;
> +
> + /*
> + * Due to hardware design failure, need to make sure GPR
> + * interrupt(#32) is unmasked during RUN mode to avoid entering
> + * DSM by mistake.
> + */
> + writel_relaxed(~0x1, cd->gpc_base + cd->cpu2wakeup);
> +
> + imx_gpcv2_instance = cd;
> + register_syscore_ops(&imx_gpcv2_syscore_ops);
> +
> + return 0;
> +}
> +
> +IRQCHIP_DECLARE(imx_gpcv2, "fsl,imx7d-gpc", imx_gpcv2_irqchip_init);
> --
> 2.5.0.rc2
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
@ 2015-08-21 13:45 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-08-21 13:45 UTC (permalink / raw)
To: linux-arm-kernel
Ping.
Shenwei
> -----Original Message-----
> From: linux-kernel-owner at vger.kernel.org
> [mailto:linux-kernel-owner at vger.kernel.org] On Behalf Of Shenwei Wang
> Sent: 2015?7?31? 16:34
> To: shawn.guo at linaro.org; tglx at linutronix.de; jason at lakedaemon.net
> Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Huang
> Yongcai-B20788
> Subject: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
>
> IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions:
> power management and wakeup source management.
> This patch adds a new irqchip driver to manage the interrupt wakeup sources on
> IMX7D.
> When the system is in WFI (wait for interrupt) mode, this GPC block will be the
> first block on the platform to be activated and signaled.
> Under normal wait mode during cpu idle, the system can be woke up by any
> enabled interrupts. Under standby or suspend mode, the system can only be
> woke up by the pre-defined wakeup sources.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
> ---
> drivers/irqchip/Kconfig | 7 ++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-imx-gpcv2.c | 273
> ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 281 insertions(+)
> create mode 100644 drivers/irqchip/irq-imx-gpcv2.c
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index
> 120d815..3fc0fac 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -177,3 +177,10 @@ config RENESAS_H8300H_INTC config
> RENESAS_H8S_INTC
> bool
> select IRQ_DOMAIN
> +
> +config IMX_GPCV2
> + bool
> + select IRQ_DOMAIN
> + help
> + Enables the wakeup IRQs for IMX platforms with GPCv2 block
> +
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index
> b8d4e96..8eb5f60 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -52,3 +52,4 @@ obj-$(CONFIG_RENESAS_H8300H_INTC) +=
> irq-renesas-h8300h.o
> obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
> obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
> obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
> +obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
> diff --git a/drivers/irqchip/irq-imx-gpcv2.c b/drivers/irqchip/irq-imx-gpcv2.c new
> file mode 100644 index 0000000..c2728b0
> --- /dev/null
> +++ b/drivers/irqchip/irq-imx-gpcv2.c
> @@ -0,0 +1,273 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/slab.h>
> +#include <linux/irqchip.h>
> +#include <linux/syscore_ops.h>
> +
> +#define IMR_NUM 4
> +#define GPC_MAX_IRQS (IMR_NUM * 32)
> +
> +#define GPC_IMR1_CORE0 0x30
> +#define GPC_IMR1_CORE1 0x40
> +
> +struct gpcv2_irqchip_data {
> + struct raw_spinlock rlock;
> + void __iomem *gpc_base;
> + u32 wakeup_sources[IMR_NUM];
> + u32 enabled_irqs[IMR_NUM];
> + u32 cpu2wakeup;
> +};
> +
> +static struct gpcv2_irqchip_data *imx_gpcv2_instance;
> +
> +u32 imx_gpcv2_get_wakeup_source(u32 **sources) {
> + if (!imx_gpcv2_instance)
> + return 0;
> +
> + if (sources)
> + *sources = imx_gpcv2_instance->wakeup_sources;
> +
> + return IMR_NUM;
> +}
> +
> +static int gpcv2_wakeup_source_save(void) {
> + struct gpcv2_irqchip_data *cd;
> + void __iomem *reg;
> + int i;
> +
> + cd = imx_gpcv2_instance;
> + if (!cd)
> + return 0;
> +
> + for (i = 0; i < IMR_NUM; i++) {
> + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> + cd->enabled_irqs[i] = readl_relaxed(reg);
> + writel_relaxed(cd->wakeup_sources[i], reg);
> + }
> +
> + return 0;
> +}
> +
> +static void gpcv2_wakeup_source_restore(void) {
> + struct gpcv2_irqchip_data *cd;
> + void __iomem *reg;
> + int i;
> +
> + cd = imx_gpcv2_instance;
> + if (!cd)
> + return;
> +
> + for (i = 0; i < IMR_NUM; i++) {
> + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> + writel_relaxed(cd->enabled_irqs[i], reg);
> + cd->wakeup_sources[i] = ~0;
> + }
> +}
> +
> +static struct syscore_ops imx_gpcv2_syscore_ops = {
> + .suspend = gpcv2_wakeup_source_save,
> + .resume = gpcv2_wakeup_source_restore,
> +};
> +
> +static int imx_gpcv2_irq_set_wake(struct irq_data *d, unsigned int on)
> +{
> + struct gpcv2_irqchip_data *cd = d->chip_data;
> + unsigned int idx = d->hwirq / 32;
> + unsigned long flags;
> + void __iomem *reg;
> + u32 mask, val;
> +
> + raw_spin_lock_irqsave(&cd->rlock, flags);
> + reg = cd->gpc_base + cd->cpu2wakeup + idx * 4;
> + mask = 1 << d->hwirq % 32;
> + val = cd->wakeup_sources[idx];
> +
> + cd->wakeup_sources[idx] = on ? (val & ~mask) : (val | mask);
> + raw_spin_unlock_irqrestore(&cd->rlock, flags);
> +
> + /*
> + * Do *not* call into the parent, as the GIC doesn't have any
> + * wake-up facility...
> + */
> +
> + return 0;
> +}
> +
> +static void imx_gpcv2_irq_unmask(struct irq_data *d) {
> + struct gpcv2_irqchip_data *cd = d->chip_data;
> + void __iomem *reg;
> + u32 val;
> +
> + raw_spin_lock(&cd->rlock);
> + reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
> + val = readl_relaxed(reg);
> + val &= ~(1 << d->hwirq % 32);
> + writel_relaxed(val, reg);
> + raw_spin_unlock(&cd->rlock);
> +
> + irq_chip_unmask_parent(d);
> +}
> +
> +static void imx_gpcv2_irq_mask(struct irq_data *d) {
> + struct gpcv2_irqchip_data *cd = d->chip_data;
> + void __iomem *reg;
> + u32 val;
> +
> + raw_spin_lock(&cd->rlock);
> + reg = cd->gpc_base + cd->cpu2wakeup + d->hwirq / 32 * 4;
> + val = readl_relaxed(reg);
> + val |= 1 << (d->hwirq % 32);
> + writel_relaxed(val, reg);
> + raw_spin_unlock(&cd->rlock);
> +
> + irq_chip_mask_parent(d);
> +}
> +
> +static struct irq_chip gpcv2_irqchip_data_chip = {
> + .name = "GPCv2",
> + .irq_eoi = irq_chip_eoi_parent,
> + .irq_mask = imx_gpcv2_irq_mask,
> + .irq_unmask = imx_gpcv2_irq_unmask,
> + .irq_set_wake = imx_gpcv2_irq_set_wake,
> + .irq_retrigger = irq_chip_retrigger_hierarchy,
> +#ifdef CONFIG_SMP
> + .irq_set_affinity = irq_chip_set_affinity_parent,
> +#endif
> +};
> +
> +static int imx_gpcv2_domain_xlate(struct irq_domain *domain,
> + struct device_node *controller,
> + const u32 *intspec,
> + unsigned int intsize,
> + unsigned long *out_hwirq,
> + unsigned int *out_type)
> +{
> + /* Shouldn't happen, really... */
> + if (domain->of_node != controller)
> + return -EINVAL;
> +
> + /* Not GIC compliant */
> + if (intsize != 3)
> + return -EINVAL;
> +
> + /* No PPI should point to this domain */
> + if (intspec[0] != 0)
> + return -EINVAL;
> +
> + *out_hwirq = intspec[1];
> + *out_type = intspec[2];
> + return 0;
> +}
> +
> +static int imx_gpcv2_domain_alloc(struct irq_domain *domain,
> + unsigned int irq, unsigned int nr_irqs,
> + void *data)
> +{
> + struct of_phandle_args *args = data;
> + struct of_phandle_args parent_args;
> + irq_hw_number_t hwirq;
> + int i;
> +
> + /* Not GIC compliant */
> + if (args->args_count != 3)
> + return -EINVAL;
> +
> + /* No PPI should point to this domain */
> + if (args->args[0] != 0)
> + return -EINVAL;
> +
> + /* Can't deal with this */
> + hwirq = args->args[1];
> + if (hwirq >= GPC_MAX_IRQS)
> + return -EINVAL;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
> + &gpcv2_irqchip_data_chip, domain->host_data);
> + }
> +
> + parent_args = *args;
> + parent_args.np = domain->parent->of_node;
> + return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs,
> +&parent_args); }
> +
> +static struct irq_domain_ops gpcv2_irqchip_data_domain_ops = {
> + .xlate = imx_gpcv2_domain_xlate,
> + .alloc = imx_gpcv2_domain_alloc,
> + .free = irq_domain_free_irqs_common,
> +};
> +
> +static int __init imx_gpcv2_irqchip_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct irq_domain *parent_domain, *domain;
> + struct gpcv2_irqchip_data *cd;
> + int i;
> +
> + if (!parent) {
> + pr_err("%s: no parent, giving up\n", node->full_name);
> + return -ENODEV;
> + }
> +
> + parent_domain = irq_find_host(parent);
> + if (!parent_domain) {
> + pr_err("%s: unable to get parent domain\n", node->full_name);
> + return -ENXIO;
> + }
> +
> + cd = kzalloc(sizeof(struct gpcv2_irqchip_data), GFP_KERNEL);
> + BUG_ON(!cd);
> +
> + cd->gpc_base = of_iomap(node, 0);
> + if (!cd->gpc_base) {
> + pr_err("fsl-gpcv2: unable to map gpc registers\n");
> + kfree(cd);
> + return -ENOMEM;
> + }
> +
> + domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
> + node, &gpcv2_irqchip_data_domain_ops, cd);
> + if (!domain) {
> + iounmap(cd->gpc_base);
> + kfree(cd);
> + return -ENOMEM;
> + }
> + irq_set_default_host(domain);
> +
> + /* Initially mask all interrupts */
> + for (i = 0; i < IMR_NUM; i++) {
> + writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE0 + i * 4);
> + writel_relaxed(~0, cd->gpc_base + GPC_IMR1_CORE1 + i * 4);
> + cd->wakeup_sources[i] = ~0;
> + }
> +
> + /* Let CORE0 as the default CPU to wake up by GPC */
> + cd->cpu2wakeup = GPC_IMR1_CORE0;
> +
> + /*
> + * Due to hardware design failure, need to make sure GPR
> + * interrupt(#32) is unmasked during RUN mode to avoid entering
> + * DSM by mistake.
> + */
> + writel_relaxed(~0x1, cd->gpc_base + cd->cpu2wakeup);
> +
> + imx_gpcv2_instance = cd;
> + register_syscore_ops(&imx_gpcv2_syscore_ops);
> +
> + return 0;
> +}
> +
> +IRQCHIP_DECLARE(imx_gpcv2, "fsl,imx7d-gpc", imx_gpcv2_irqchip_init);
> --
> 2.5.0.rc2
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-07-31 21:33 ` Shenwei Wang
@ 2015-08-21 13:45 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-08-21 13:45 UTC (permalink / raw)
To: shawn.guo, tglx, jason; +Cc: linux-arm-kernel, linux-kernel, Huang Anson
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 43042 bytes --]
Ping.
Shenwei
> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org
> [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Shenwei Wang
> Sent: 2015Äê7ÔÂ31ÈÕ 16:34
> To: shawn.guo@linaro.org; tglx@linutronix.de; jason@lakedaemon.net
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Huang
> Yongcai-B20788
> Subject: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
>
> IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions:
> power management and wakeup source management.
>
> GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4 domains.
> And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
> After configuring the GPCv2 module, the platform can enter into a selected mode
> either automatically triggered by ARM WFI instruction or manually by software.
> The system will exit the low power states by the predefined wakeup sources
> which are managed by the gpcv2 irqchip driver.
>
> This patch adds a new suspend driver to manage the power states on IMX7D.
> It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
> ---
> arch/arm/mach-imx/Kconfig | 1 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/common.h | 4 +
> arch/arm/mach-imx/pm-imx7.c | 917
> +++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> 5 files changed, 1453 insertions(+)
> create mode 100644 arch/arm/mach-imx/pm-imx7.c create mode 100644
> arch/arm/mach-imx/suspend-imx7.S
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index
> 8ceda28..54f8553 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -562,6 +562,7 @@ config SOC_IMX7D
> select ARM_GIC
> select HAVE_IMX_ANATOP
> select HAVE_IMX_MMDC
> + select IMX_GPCV2
> help
> This enables support for Freescale i.MX7 Dual processor.
>
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index
> fb689d8..60f13fd 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -88,6 +88,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
>
> ifeq ($(CONFIG_SUSPEND),y)
> AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
> +AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
> +obj-$(CONFIG_SOC_IMX7D) += suspend-imx7.o pm-imx7.o
> obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
> obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif diff --git
> a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index
> 21e4e86..c5767f4 100644
> --- a/arch/arm/mach-imx/common.h
> +++ b/arch/arm/mach-imx/common.h
> @@ -126,6 +126,10 @@ static const u32 imx53_suspend_sz; static inline void
> imx6_suspend(void __iomem *ocram_vbase) {} #endif
>
> +void ca7_cpu_resume(void);
> +void imx7_suspend(void __iomem *ocram_vbase);
> +u32 imx_gpcv2_get_wakeup_source(u32 **sources);
> +
> void imx6_pm_ccm_init(const char *ccm_compat); void imx6q_pm_init(void);
> void imx6dl_pm_init(void); diff --git a/arch/arm/mach-imx/pm-imx7.c
> b/arch/arm/mach-imx/pm-imx7.c new file mode 100644 index 0000000..052c2cb
> --- /dev/null
> +++ b/arch/arm/mach-imx/pm-imx7.c
> @@ -0,0 +1,917 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +#include <linux/suspend.h>
> +#include <linux/slab.h>
> +#include <asm/suspend.h>
> +#include <asm/fncpy.h>
> +
> +#include "common.h"
> +
> +#define GPC_LPCR_A7_BSC 0x0
> +#define GPC_LPCR_A7_AD 0x4
> +#define GPC_LPCR_M4 0x8
> +
> +#define GPC_SLPCR 0x14
> +#define GPC_PGC_ACK_SEL_A7 0x24
> +
> +#define GPC_SLOTx_CFG(x) (0xb0 + 4 * (x))
> +
> +#define GPC_PGC_CPU_MAPPING 0xec
> +
> +#define GPC_PGC_C0 0x800
> +#define GPC_PGC_C1 0x840
> +#define GPC_PGC_SCU 0x880
> +#define GPC_PGC_SCU_TIMING 0x890
> +#define GPC_PGC_FM 0xa00
> +#define GPC_PGC_MIPI_PHY 0xc00
> +#define GPC_PGC_PCIE_PHY 0xc40
> +#define GPC_PGC_USB_OTG1_PHY 0xc80
> +#define GPC_PGC_USB_OTG2_PHY 0xcc0
> +#define GPC_PGC_USB_HSIC_PHY 0xd00
> +
> +#define ANADIG_ARM_PLL 0x60
> +#define ANADIG_DDR_PLL 0x70
> +#define ANADIG_SYS_PLL 0xb0
> +#define ANADIG_ENET_PLL 0xe0
> +#define ANADIG_AUDIO_PLL 0xf0
> +#define ANADIG_VIDEO_PLL 0x130
> +
> +#define BM_LPCR_A7_AD_L2PGE (0x1 << 16)
> +#define BM_LPCR_A7_AD_EN_C1_PUP (0x1 << 11)
> +#define BM_LPCR_A7_AD_EN_C1_IRQ_PUP (0x1 << 10)
> +#define BM_LPCR_A7_AD_EN_C0_PUP (0x1 << 9)
> +#define BM_LPCR_A7_AD_EN_C0_IRQ_PUP (0x1 << 8)
> +#define BM_LPCR_A7_AD_EN_PLAT_PDN (0x1 << 4)
> +#define BM_LPCR_A7_AD_EN_C1_PDN (0x1 << 3)
> +#define BM_LPCR_A7_AD_EN_C1_WFI_PDN (0x1 << 2)
> +#define BM_LPCR_A7_AD_EN_C0_PDN (0x1 << 1)
> +#define BM_LPCR_A7_AD_EN_C0_WFI_PDN (0x1)
> +
> +#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP (0x7 << 28)
> +#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM (0x1 << 14)
> +#define BM_LPCR_A7_BSC_LPM1 (0x3 << 2)
> +#define BM_LPCR_A7_BSC_LPM0 (0x3)
> +
> +#define BM_LPCR_M4_MASK_DSM_TRIGGER (0x1 << 31)
> +
> +#define BM_SLPCR_EN_DSM (0x1 << 31)
> +#define BM_SLPCR_RBC_EN (0x1 << 30)
> +#define BM_SLPCR_VSTBY (0x1 << 2)
> +#define BM_SLPCR_SBYOS (0x1 << 1)
> +#define BM_SLPCR_BYPASS_PMIC_READY (0x1)
> +
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP (0x1 << 31)
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN (0x1 << 15)
> +
> +#define BM_ANADIG_ARM_PLL_OVERRIDE (0x1 << 20)
> +#define BM_ANADIG_DDR_PLL_OVERRIDE (0x1 << 19)
> +#define BM_ANADIG_SYS_PLL_PFDx_OVERRIDE (0x1FF << 17)
> +#define BM_ANADIG_ENET_PLL_OVERRIDE (0x1 << 13)
> +#define BM_ANADIG_AUDIO_PLL_OVERRIDE (0x1 << 24)
> +#define BM_ANADIG_VIDEO_PLL_OVERRIDE (0x1 << 24)
> +
> +#define A7_LPM_WAIT 0x5
> +#define A7_LPM_STOP 0xa
> +#define GPC_MAX_SLOT_NUMBER 10
> +
> +#define REG_SET 0x4
> +#define REG_CLR 0x8
> +
> +#define MX7_MAX_DDRC_NUM 32
> +#define MX7_MAX_DDRC_PHY_NUM 16
> +
> +#define READ_DATA_FROM_HARDWARE 0
> +#define MX7_SUSPEND_OCRAM_SIZE 0x1000
> +
> +enum gpcv2_mode {
> + GPC_WAIT_CLOCKED,
> + GPC_WAIT_UNCLOCKED,
> + GPC_STOP_POWER_ON,
> + GPC_STOP_POWER_OFF,
> +};
> +
> +/*
> + * GPCv2 has the following power domains, and each domain can be
> +power-up
> + * and power-down via GPC settings.
> + *
> + * Core 0 of A7 power domain
> + * Core1 of A7 power domain
> + * SCU/L2 cache RAM of A7 power domain
> + * Fastmix and megamix power domain
> + * USB OTG1 PHY power domain
> + * USB OTG2 PHY power domain
> + * PCIE PHY power domain
> + * USB HSIC PHY power domain
> + * Core 0 of M4 power domain
> + */
> +
> +enum gpcv2_slot {
> + CORE0_A7,
> + CORE1_A7,
> + SCU_A7,
> + FAST_MEGA_MIX,
> + MIPI_PHY,
> + PCIE_PHY,
> + USB_OTG1_PHY,
> + USB_OTG2_PHY,
> + USB_HSIC_PHY,
> + CORE0_M4,
> +};
> +
> +struct imx_gpcv2;
> +
> +struct imx_gpcv2_suspend {
> + void (*set_mode)(struct imx_gpcv2 *, enum gpcv2_mode mode);
> + void (*lpm_cpu_power_gate)(struct imx_gpcv2 *, u32, bool);
> + void (*lpm_plat_power_gate)(struct imx_gpcv2 *, bool);
> + void (*lpm_env_setup)(struct imx_gpcv2 *);
> + void (*lpm_env_clean)(struct imx_gpcv2 *);
> +
> + void (*set_slot)(struct imx_gpcv2 *cd, u32 index,
> + enum gpcv2_slot slot, bool mode);
> + void (*set_act)(struct imx_gpcv2 *cd,
> + enum gpcv2_slot slot, bool mode);
> + void (*clear_slots)(struct imx_gpcv2 *);
> + void (*lpm_enable_core)(struct imx_gpcv2 *,
> + bool enable, u32 offset);
> +
> + void (*standby)(struct imx_gpcv2 *);
> + void (*suspend)(struct imx_gpcv2 *);
> +
> + void (*suspend_fn_in_ocram)(void __iomem *ocram_vbase);
> + void __iomem *ocram_vbase;
> +};
> +
> +struct imx_gpcv2 {
> + u32 *wakeupmix_mask;
> + u32 *lpsrmix_mask;
> + u32 *mfmix_mask;
> + spinlock_t lock;
> +
> + struct imx_gpcv2_suspend *pm;
> + struct regmap *anatop;
> + struct regmap *gpcv2;
> +
> + u32 (*get_wakeup_source)(u32 **);
> +};
> +
> +struct imx7_pm_base {
> + phys_addr_t pbase;
> + void __iomem *vbase;
> +};
> +
> +struct imx7_pm_socdata {
> + u32 ddr_type;
> + const char *ddrc_compat;
> + const char *ddrc_phy_compat;
> + const char *src_compat;
> + const char *iomuxc_gpr_compat;
> + const char *ccm_compat;
> + const char *gpc_compat;
> + const char *anatop_compat;
> + const u32 ddrc_num;
> + const u32 (*ddrc_offset)[2];
> + const u32 ddrc_phy_num;
> + const u32 (*ddrc_phy_offset)[2];
> +};
> +
> +/*
> + * This structure is for passing necessary data for low level ocram
> + * suspend code(arch/arm/mach-imx/suspend-imx7.S), if this struct
> + * definition is changed, the offset definition in
> + * arch/arm/mach-imx/suspend-imx7.S must be also changed accordingly,
> + * otherwise, the suspend to ocram function will be broken!
> + */
> +
> +struct imx7_cpu_pm_info {
> + u32 m4_reserve0;
> + u32 m4_reserve1;
> + u32 m4_reserve2;
> +
> + /* The physical address of pm_info. */
> + phys_addr_t pbase;
> +
> + /* The physical resume address for asm code */
> + phys_addr_t resume_addr;
> + u32 ddr_type;
> +
> + u32 pm_info_size;
> +
> + struct imx7_pm_base ddrc_base;
> + struct imx7_pm_base ddrc_phy_base;
> + struct imx7_pm_base src_base;
> + struct imx7_pm_base iomuxc_gpr_base;
> + struct imx7_pm_base ccm_base;
> + struct imx7_pm_base gpc_base;
> + struct imx7_pm_base l2_base;
> + struct imx7_pm_base anatop_base;
> +
> + u32 ttbr1;
> +
> + /* Number of DDRC which need saved/restored. */
> + u32 ddrc_num;
> +
> + /* To save offset and value */
> + u32 ddrc_val[MX7_MAX_DDRC_NUM][2];
> +
> + /* Number of DDRC which need saved/restored. */
> + u32 ddrc_phy_num;
> +
> + /* To save offset and value */
> + u32 ddrc_phy_val[MX7_MAX_DDRC_NUM][2];
> +} __aligned(8);
> +
> +static const u32 imx7d_ddrc_ddr3_setting[][2] __initconst = {
> + { 0x0, READ_DATA_FROM_HARDWARE },
> + { 0x1a0, READ_DATA_FROM_HARDWARE },
> + { 0x1a4, READ_DATA_FROM_HARDWARE },
> + { 0x1a8, READ_DATA_FROM_HARDWARE },
> + { 0x64, READ_DATA_FROM_HARDWARE },
> + { 0x490, 0x00000001 },
> + { 0xd0, 0xc0020001 },
> + { 0xd4, READ_DATA_FROM_HARDWARE },
> + { 0xdc, READ_DATA_FROM_HARDWARE },
> + { 0xe0, READ_DATA_FROM_HARDWARE },
> + { 0xe4, READ_DATA_FROM_HARDWARE },
> + { 0xf4, READ_DATA_FROM_HARDWARE },
> + { 0x100, READ_DATA_FROM_HARDWARE },
> + { 0x104, READ_DATA_FROM_HARDWARE },
> + { 0x108, READ_DATA_FROM_HARDWARE },
> + { 0x10c, READ_DATA_FROM_HARDWARE },
> + { 0x110, READ_DATA_FROM_HARDWARE },
> + { 0x114, READ_DATA_FROM_HARDWARE },
> + { 0x120, 0x03030803 },
> + { 0x180, READ_DATA_FROM_HARDWARE },
> + { 0x190, READ_DATA_FROM_HARDWARE },
> + { 0x194, READ_DATA_FROM_HARDWARE },
> + { 0x200, READ_DATA_FROM_HARDWARE },
> + { 0x204, READ_DATA_FROM_HARDWARE },
> + { 0x214, READ_DATA_FROM_HARDWARE },
> + { 0x218, READ_DATA_FROM_HARDWARE },
> + { 0x240, 0x06000601 },
> + { 0x244, READ_DATA_FROM_HARDWARE },
> +};
> +
> +static const u32 imx7d_ddrc_phy_ddr3_setting[][2] __initconst = {
> + { 0x0, READ_DATA_FROM_HARDWARE },
> + { 0x4, READ_DATA_FROM_HARDWARE },
> + { 0x10, READ_DATA_FROM_HARDWARE },
> + { 0x9c, READ_DATA_FROM_HARDWARE },
> + { 0x20, READ_DATA_FROM_HARDWARE },
> + { 0x30, READ_DATA_FROM_HARDWARE },
> + { 0x50, 0x01000010 },
> + { 0x50, 0x00000010 },
> + { 0xc0, 0x0e407304 },
> + { 0xc0, 0x0e447304 },
> + { 0xc0, 0x0e447306 },
> + { 0xc0, 0x0e447304 },
> + { 0xc0, 0x0e407306 },
> +};
> +
> +static const struct imx7_pm_socdata imx7d_pm_data_ddr3 __initconst = {
> + .iomuxc_gpr_compat = "fsl,imx7d-iomuxc",
> + .ddrc_phy_compat = "fsl,imx7d-ddrc-phy",
> + .anatop_compat = "fsl,imx7d-anatop",
> + .ddrc_compat = "fsl,imx7d-ddrc",
> + .ccm_compat = "fsl,imx7d-ccm",
> + .src_compat = "fsl,imx7d-src",
> + .gpc_compat = "fsl,imx7d-gpc",
> + .ddrc_phy_num = ARRAY_SIZE(imx7d_ddrc_phy_ddr3_setting),
> + .ddrc_phy_offset = imx7d_ddrc_phy_ddr3_setting,
> + .ddrc_num = ARRAY_SIZE(imx7d_ddrc_ddr3_setting),
> + .ddrc_offset = imx7d_ddrc_ddr3_setting, };
> +
> +static struct imx_gpcv2 *gpcv2_instance;
> +
> +static void imx_gpcv2_lpm_clear_slots(struct imx_gpcv2 *gpc) {
> + int i;
> +
> + for (i = 0; i < GPC_MAX_SLOT_NUMBER; i++)
> + regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(i), 0x0);
> +
> + regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7,
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP |
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
> +}
> +
> +static void imx_gpcv2_lpm_enable_core(struct imx_gpcv2 *gpc,
> + bool enable, u32 offset)
> +{
> + regmap_write(gpc->gpcv2, offset, enable); }
> +
> +static void imx_gpcv2_lpm_slot_setup(struct imx_gpcv2 *gpc,
> + u32 index, enum gpcv2_slot slot, bool powerup) {
> + u32 val;
> +
> + if (index >= GPC_MAX_SLOT_NUMBER) {
> + pr_err("Invalid slot index!\n");
> + return;
> + }
> +
> + val = (powerup ? 0x2 : 0x1) << (slot * 2);
> + regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(index), val); }
> +
> +static void imx_gpcv2_lpm_set_ack(struct imx_gpcv2 *gpc,
> + enum gpcv2_slot slot, bool powerup)
> +{
> + u32 val;
> +
> + regmap_read(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, &val);
> +
> + /* clear dummy ack */
> + val &= ~(powerup ? BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP :
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
> +
> + val |= 1 << (slot + (powerup ? 16 : 0));
> + regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, val); }
> +
> +static void imx_gpcv2_lpm_env_setup(struct imx_gpcv2 *gpc) {
> + /* PLL and PFDs overwrite set */
> + regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_SET,
> + BM_ANADIG_ARM_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_SET,
> + BM_ANADIG_DDR_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_SET,
> + BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_SET,
> + BM_ANADIG_ENET_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_SET,
> + BM_ANADIG_AUDIO_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_SET,
> + BM_ANADIG_VIDEO_PLL_OVERRIDE);
> +}
> +
> +static void imx_gpcv2_lpm_env_clean(struct imx_gpcv2 *gpc) {
> + /* PLL and PFDs overwrite clear */
> + regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_CLR,
> + BM_ANADIG_ARM_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_CLR,
> + BM_ANADIG_DDR_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_CLR,
> + BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_CLR,
> + BM_ANADIG_ENET_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_CLR,
> + BM_ANADIG_AUDIO_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_CLR,
> + BM_ANADIG_VIDEO_PLL_OVERRIDE);
> +}
> +
> +static void imx_gpcv2_lpm_set_mode(struct imx_gpcv2 *gpc,
> + enum gpcv2_mode mode)
> +{
> + u32 lpcr, slpcr;
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &lpcr);
> + regmap_read(gpc->gpcv2, GPC_SLPCR, &slpcr);
> +
> + /* all cores' LPM settings must be same */
> + lpcr &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
> + lpcr |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> +
> + slpcr &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN
> |
> + BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
> +
> + switch (mode) {
> + case GPC_WAIT_CLOCKED:
> + break;
> + case GPC_WAIT_UNCLOCKED:
> + lpcr |= A7_LPM_WAIT;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + break;
> + case GPC_STOP_POWER_ON:
> + lpcr |= A7_LPM_STOP;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
> + BM_SLPCR_BYPASS_PMIC_READY);
> + break;
> + case GPC_STOP_POWER_OFF:
> + lpcr |= A7_LPM_STOP;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
> + BM_SLPCR_SBYOS | BM_SLPCR_VSTBY |
> + BM_SLPCR_BYPASS_PMIC_READY);
> + break;
> + default:
> + return;
> + }
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, lpcr);
> + regmap_write(gpc->gpcv2, GPC_SLPCR, slpcr); }
> +
> +static void imx_gpcv2_lpm_cpu_power_gate(struct imx_gpcv2 *gpc,
> + u32 cpu, bool engate)
> +{
> + u32 val;
> +
> + const u32 val_pdn[2] = {
> + BM_LPCR_A7_AD_EN_C0_PDN | BM_LPCR_A7_AD_EN_C0_PUP,
> + BM_LPCR_A7_AD_EN_C1_PDN | BM_LPCR_A7_AD_EN_C1_PUP,
> + };
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
> + if (engate)
> + val |= val_pdn[cpu];
> + else
> + val &= ~val_pdn[cpu];
> +
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val); }
> +
> +static void imx_lpm_plat_power_gate(struct imx_gpcv2 *gpc, bool engate)
> +{
> + u32 val;
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
> + val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
> + if (engate)
> + val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
> +
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val); }
> +
> +static void imx_gpcv2_lpm_standby(struct imx_gpcv2 *gpc) {
> + struct imx_gpcv2_suspend *pm = gpc->pm;
> +
> + pm->lpm_env_setup(gpc);
> + /* pm->set_mode(gpc, GPC_STOP_POWER_OFF); */
> + pm->set_mode(gpc, GPC_WAIT_UNCLOCKED);
> +
> + /* Zzz ... */
> + cpu_do_idle();
> +
> + pm->set_mode(gpc, GPC_WAIT_CLOCKED);
> + pm->lpm_env_clean(gpc);
> +}
> +
> +static int gpcv2_suspend_finish(unsigned long val) {
> + struct imx_gpcv2_suspend *pm = (struct imx_gpcv2_suspend *)val;
> +
> + if (!pm->suspend_fn_in_ocram) {
> + cpu_do_idle();
> + } else {
> + /*
> + * call low level suspend function in ocram,
> + * as we need to float DDR IO.
> + */
> + local_flush_tlb_all();
> + pm->suspend_fn_in_ocram(pm->ocram_vbase);
> + }
> +
> + return 0;
> +}
> +
> +static void imx_gpcv2_lpm_suspend(struct imx_gpcv2 *gpc) {
> + struct imx_gpcv2_suspend *pm = gpc->pm;
> + u32 *sources;
> + int i, num;
> +
> + pm->lpm_env_setup(gpc);
> + pm->set_mode(gpc, GPC_STOP_POWER_OFF);
> +
> + /* enable core0 power down/up with low power mode */
> + pm->lpm_cpu_power_gate(gpc, 0, true);
> +
> + /* enable plat power down with low power mode */
> + pm->lpm_plat_power_gate(gpc, true);
> +
> + /*
> + * To avoid confuse, we use slot 0~4 for power down,
> + * slot 5~9 for power up.
> + *
> + * Power down slot sequence:
> + * Slot0 -> CORE0
> + * Slot1 -> Mega/Fast MIX
> + * Slot2 -> SCU
> + *
> + * Power up slot sequence:
> + * Slot5 -> Mega/Fast MIX
> + * Slot6 -> SCU
> + * Slot7 -> CORE0
> + */
> + pm->set_slot(gpc, 0, CORE0_A7, false);
> + pm->set_slot(gpc, 2, SCU_A7, false);
> +
> + if (gpc->get_wakeup_source) {
> + pm->set_slot(gpc, 1, FAST_MEGA_MIX, false);
> + pm->set_slot(gpc, 5, FAST_MEGA_MIX, true);
> + pm->lpm_enable_core(gpc, true, GPC_PGC_FM);
> + num = gpc->get_wakeup_source(&sources);
> + for (i = 0; i < num; i++) {
> + if ((~sources[i] & gpc->mfmix_mask[i]) == 0)
> + continue;
> + pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
> + break;
> + }
> + }
> +
> + pm->set_slot(gpc, 6, SCU_A7, true);
> + pm->set_slot(gpc, 7, CORE0_A7, true);
> +
> + /* Set Power down act */
> + pm->set_act(gpc, SCU_A7, false);
> +
> + /* Set Power up act */
> + pm->set_act(gpc, CORE0_A7, true);
> +
> + /* enable core0, scu */
> + pm->lpm_enable_core(gpc, true, GPC_PGC_C0);
> + pm->lpm_enable_core(gpc, true, GPC_PGC_SCU);
> +
> + cpu_suspend((unsigned long)pm, gpcv2_suspend_finish);
> +
> + pm->lpm_env_clean(gpc);
> + pm->set_mode(gpc, GPC_WAIT_CLOCKED);
> + pm->lpm_cpu_power_gate(gpc, 0, false);
> + pm->lpm_plat_power_gate(gpc, false);
> +
> + pm->lpm_enable_core(gpc, false, GPC_PGC_C0);
> + pm->lpm_enable_core(gpc, false, GPC_PGC_SCU);
> + pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
> + pm->clear_slots(gpc);
> +}
> +
> +static int imx_gpcv2_pm_enter(suspend_state_t state) {
> + struct imx_gpcv2_suspend *pm;
> +
> + BUG_ON(!gpcv2_instance);
> + pm = gpcv2_instance->pm;
> +
> + switch (state) {
> + case PM_SUSPEND_STANDBY:
> + pm->standby(gpcv2_instance);
> + break;
> +
> + case PM_SUSPEND_MEM:
> + pm->suspend(gpcv2_instance);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int imx_gpcv2_pm_valid(suspend_state_t state) {
> + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; }
> +
> +static int __init imx_get_base_from_node(struct device_node *node,
> + struct imx7_pm_base *base)
> +{
> + struct resource res;
> + int ret = 0;
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = ioremap(res.start, resource_size(&res));
> + if (!base->vbase) {
> + iounmap(base->vbase);
> + ret = -ENOMEM;
> + }
> +put_node:
> + of_node_put(node);
> +
> + return ret;
> +}
> +
> +static int __init imx_get_base_from_dt(struct imx7_pm_base *base,
> + const char *compat)
> +{
> + struct device_node *node;
> + struct resource res;
> + int ret = 0;
> +
> + node = of_find_compatible_node(NULL, NULL, compat);
> + if (!node) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = ioremap(res.start, resource_size(&res));
> + if (!base->vbase)
> + ret = -ENOMEM;
> +
> +put_node:
> + of_node_put(node);
> +out:
> + return ret;
> +}
> +
> +static int __init imx_get_exec_base_from_dt(struct imx7_pm_base *base,
> + const char *compat)
> +{
> + struct device_node *node;
> + struct resource res;
> + int ret = 0;
> +
> + node = of_find_compatible_node(NULL, NULL, compat);
> + if (!node) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = __arm_ioremap_exec(res.start, resource_size(&res),
> +false);
> +
> + if (!base->vbase)
> + ret = -ENOMEM;
> +
> +put_node:
> + of_node_put(node);
> +out:
> + return ret;
> +}
> +
> +static int __init imx_gpcv2_suspend_init(struct imx_gpcv2_suspend *pm,
> + const struct imx7_pm_socdata *socdata) {
> + struct imx7_pm_base aips_base[3] = { {0, 0}, {0, 0}, {0, 0} };
> + struct imx7_pm_base sram_base = {0, 0};
> + struct imx7_cpu_pm_info *pm_info;
> + struct device_node *node = NULL;
> + int i, ret = 0;
> +
> + const u32 (*ddrc_phy_offset_array)[2];
> + const u32 (*ddrc_offset_array)[2];
> +
> + if (!socdata || !pm) {
> + pr_warn("%s: invalid argument!\n", __func__);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < 3; i++) {
> + node = of_find_compatible_node(node, NULL, "fsl,aips-bus");
> + if (!node) {
> + pr_warn("%s: failed to find aips %d node!\n",
> + __func__, i);
> + break;
> + }
> + ret = imx_get_base_from_node(node, &aips_base[i]);
> + if (ret) {
> + pr_warn("%s: failed to get aips[%d] base %d!\n",
> + __func__, i, ret);
> + }
> + }
> +
> + ret = imx_get_exec_base_from_dt(&sram_base, "fsl,lpm-sram");
> + if (ret) {
> + pr_warn("%s: failed to get lpm-sram base %d!\n",
> + __func__, ret);
> + goto lpm_sram_map_failed;
> + }
> +
> + pm_info = sram_base.vbase;
> + pm_info->pbase = sram_base.pbase;
> + pm_info->resume_addr = virt_to_phys(ca7_cpu_resume);
> + pm_info->pm_info_size = sizeof(*pm_info);
> +
> + ret = imx_get_base_from_dt(&pm_info->ccm_base,
> socdata->ccm_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
> + goto ccm_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->ddrc_base,
> socdata->ddrc_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ddrc base %d!\n", __func__, ret);
> + goto ddrc_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->ddrc_phy_base,
> + socdata->ddrc_phy_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ddrc_phy base %d!\n", __func__, ret);
> + goto ddrc_phy_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->src_base, socdata->src_compat);
> + if (ret) {
> + pr_warn("%s: failed to get src base %d!\n", __func__, ret);
> + goto src_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->iomuxc_gpr_base,
> + socdata->iomuxc_gpr_compat);
> + if (ret) {
> + pr_warn("%s: failed to get iomuxc_gpr base %d!\n",
> + __func__, ret);
> + goto iomuxc_gpr_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->gpc_base, socdata->gpc_compat);
> + if (ret) {
> + pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
> + goto gpc_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->anatop_base,
> + socdata->anatop_compat);
> + if (ret) {
> + pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
> + goto anatop_map_failed;
> + }
> +
> + pm_info->ddrc_num = socdata->ddrc_num;
> + ddrc_offset_array = socdata->ddrc_offset;
> + pm_info->ddrc_phy_num = socdata->ddrc_phy_num;
> + ddrc_phy_offset_array = socdata->ddrc_phy_offset;
> +
> + /* initialize DDRC settings */
> + for (i = 0; i < pm_info->ddrc_num; i++) {
> + pm_info->ddrc_val[i][0] = ddrc_offset_array[i][0];
> + if (ddrc_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
> + pm_info->ddrc_val[i][1] =
> + readl_relaxed(pm_info->ddrc_base.vbase +
> + ddrc_offset_array[i][0]);
> + else
> + pm_info->ddrc_val[i][1] = ddrc_offset_array[i][1];
> + }
> +
> + /* initialize DDRC PHY settings */
> + for (i = 0; i < pm_info->ddrc_phy_num; i++) {
> + pm_info->ddrc_phy_val[i][0] =
> + ddrc_phy_offset_array[i][0];
> + if (ddrc_phy_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
> + pm_info->ddrc_phy_val[i][1] =
> + readl_relaxed(pm_info->ddrc_phy_base.vbase +
> + ddrc_phy_offset_array[i][0]);
> + else
> + pm_info->ddrc_phy_val[i][1] =
> + ddrc_phy_offset_array[i][1];
> + }
> +
> + pm->suspend_fn_in_ocram = fncpy(
> + sram_base.vbase + sizeof(*pm_info),
> + &imx7_suspend,
> + MX7_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
> + pm->ocram_vbase = sram_base.vbase;
> +
> + goto put_node;
> +
> +anatop_map_failed:
> + iounmap(pm_info->anatop_base.vbase);
> +gpc_map_failed:
> + iounmap(pm_info->gpc_base.vbase);
> +iomuxc_gpr_map_failed:
> + iounmap(pm_info->iomuxc_gpr_base.vbase);
> +src_map_failed:
> + iounmap(pm_info->src_base.vbase);
> +ddrc_phy_map_failed:
> + iounmap(pm_info->ddrc_phy_base.vbase);
> +ddrc_map_failed:
> + iounmap(pm_info->ddrc_base.vbase);
> +ccm_map_failed:
> + iounmap(pm_info->ccm_base.vbase);
> +lpm_sram_map_failed:
> + iounmap(sram_base.vbase);
> +put_node:
> + of_node_put(node);
> +
> + return ret;
> +}
> +
> +static const struct platform_suspend_ops imx_gpcv2_pm_ops = {
> + .enter = imx_gpcv2_pm_enter,
> + .valid = imx_gpcv2_pm_valid,
> +};
> +
> +static int __init imx_gpcv2_pm_init(void) {
> + struct imx_gpcv2_suspend *pm;
> + struct imx_gpcv2 *gpc;
> + int val, num;
> +
> + pm = kzalloc(sizeof(struct imx_gpcv2_suspend), GFP_KERNEL);
> + if (!pm) {
> + pr_warn("[GPCv2] %s init failed\r\n", __func__);
> + return -ENOMEM;
> + }
> +
> + gpc = kzalloc(sizeof(struct imx_gpcv2), GFP_KERNEL);
> + if (!gpc) {
> + pr_warn("[GPCv2] %s init failed\r\n", __func__);
> + kfree(pm);
> + return -ENOMEM;
> + }
> +
> + imx_gpcv2_suspend_init(pm, &imx7d_pm_data_ddr3);
> +
> + pm->lpm_env_setup = imx_gpcv2_lpm_env_setup;
> + pm->lpm_env_clean = imx_gpcv2_lpm_env_clean;
> +
> + pm->lpm_cpu_power_gate = imx_gpcv2_lpm_cpu_power_gate;
> + pm->lpm_plat_power_gate = imx_lpm_plat_power_gate;
> + pm->lpm_enable_core = imx_gpcv2_lpm_enable_core;
> + pm->set_mode = imx_gpcv2_lpm_set_mode;
> +
> + pm->clear_slots = imx_gpcv2_lpm_clear_slots;
> + pm->set_slot = imx_gpcv2_lpm_slot_setup;
> + pm->set_act = imx_gpcv2_lpm_set_ack;
> +
> + pm->standby = imx_gpcv2_lpm_standby;
> + pm->suspend = imx_gpcv2_lpm_suspend;
> +
> + gpc->anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
> + if (IS_ERR(gpc->anatop))
> + goto error_exit;
> +
> + gpc->gpcv2 = syscon_regmap_lookup_by_compatible("fsl,imx7d-gpc");
> + if (IS_ERR(gpc->gpcv2))
> + goto error_exit;
> +
> + /* only external IRQs to wake up LPM and core 0/1 */
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &val);
> + val |= BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP;
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, val);
> + /* mask m4 dsm trigger */
> + regmap_read(gpc->gpcv2, GPC_LPCR_M4, &val);
> + val |= BM_LPCR_M4_MASK_DSM_TRIGGER;
> + regmap_write(gpc->gpcv2, GPC_LPCR_M4, val);
> +
> + /* set mega/fast mix in A7 domain */
> + regmap_write(gpc->gpcv2, GPC_PGC_CPU_MAPPING, 0x1);
> + /* set SCU timing */
> + val = (0x59 << 10) | 0x5B | (0x51 << 20);
> + regmap_write(gpc->gpcv2, GPC_PGC_SCU_TIMING, val);
> +
> + gpc->pm = pm;
> + gpc->get_wakeup_source = imx_gpcv2_get_wakeup_source;
> + gpcv2_instance = gpc;
> +
> + num = imx_gpcv2_get_wakeup_source(0);
> +
> + /*
> + * The IP blocks which may be the wakeup sources are allocated into
> + * several power domains. MFMIX, LPSRMX, and WAKEUPMIX are three of
> + * those power domains. If a bit is '1' in the mask, it means the IP
> + * block is inside the power domain. The mask will be used to decide
> + * if a power domain should be shutdown or not when system goes into
> + * suspend states.
> + */
> +
> + if (num)
> + gpc->wakeupmix_mask = kzalloc(sizeof(u32)*num*3, GFP_KERNEL);
> +
> + if (!gpc->wakeupmix_mask)
> + goto error_exit;
> +
> + /*
> + * Shutdown LPSRMIX and WAKEUP power domain has not been
> + * implemented in this patch yet.
> + */
> +
> + gpc->lpsrmix_mask = gpc->wakeupmix_mask + num;
> + gpc->mfmix_mask = gpc->wakeupmix_mask + num*2;
> +
> + /* Mask the wakeup sources in M/F power domain */
> + gpc->mfmix_mask[0] = 0x54010000;
> + gpc->mfmix_mask[1] = 0xC00;
> + gpc->mfmix_mask[2] = 0x0;
> + gpc->mfmix_mask[3] = 0x400010;
> +
> + suspend_set_ops(&imx_gpcv2_pm_ops);
> + return 0;
> +
> +error_exit:
> + kfree(pm);
> + kfree(gpc);
> + return -ENODEV;
> +}
> +
> +device_initcall(imx_gpcv2_pm_init);
> diff --git a/arch/arm/mach-imx/suspend-imx7.S
> b/arch/arm/mach-imx/suspend-imx7.S
> new file mode 100644
> index 0000000..8c3f516
> --- /dev/null
> +++ b/arch/arm/mach-imx/suspend-imx7.S
> @@ -0,0 +1,529 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/asm-offsets.h>
> +#include "hardware.h"
> +
> +/*
> + * ==================== low level suspend ====================
> + *
> + * Better to follow below rules to use ARM registers:
> + * r0: pm_info structure address;
> + * r1 ~ r4: for saving pm_info members;
> + * r5 ~ r10: free registers;
> + * r11: io base address.
> + *
> + * suspend ocram space layout:
> + * ======================== high address ======================
> + * .
> + * .
> + * .
> + * ^
> + * ^
> + * ^
> + * imx7_suspend code
> + * PM_INFO structure(imx7_cpu_pm_info)
> + * ======================== low address ======================= */
> +
> +/*
> + * Below offsets are based on struct imx7_cpu_pm_info
> + * which defined in arch/arm/mach-imx/pm-imx7.c, this
> + * structure contains necessary pm info for low level
> + * suspend related code.
> + */
> +#define PM_INFO_M4_RESERVE0_OFFSET 0x0
> +#define PM_INFO_M4_RESERVE1_OFFSET 0x4
> +#define PM_INFO_M4_RESERVE2_OFFSET 0x8
> +#define PM_INFO_PBASE_OFFSET 0xc
> +#define PM_INFO_RESUME_ADDR_OFFSET 0x10
> +#define PM_INFO_DDR_TYPE_OFFSET 0x14
> +#define PM_INFO_PM_INFO_SIZE_OFFSET 0x18
> +#define PM_INFO_MX7_DDRC_P_OFFSET 0x1c
> +#define PM_INFO_MX7_DDRC_V_OFFSET 0x20
> +#define PM_INFO_MX7_DDRC_PHY_P_OFFSET 0x24
> +#define PM_INFO_MX7_DDRC_PHY_V_OFFSET 0x28
> +#define PM_INFO_MX7_SRC_P_OFFSET 0x2c
> +#define PM_INFO_MX7_SRC_V_OFFSET 0x30
> +#define PM_INFO_MX7_IOMUXC_GPR_P_OFFSET 0x34
> +#define PM_INFO_MX7_IOMUXC_GPR_V_OFFSET 0x38
> +#define PM_INFO_MX7_CCM_P_OFFSET 0x3c
> +#define PM_INFO_MX7_CCM_V_OFFSET 0x40
> +#define PM_INFO_MX7_GPC_P_OFFSET 0x44
> +#define PM_INFO_MX7_GPC_V_OFFSET 0x48
> +#define PM_INFO_MX7_L2_P_OFFSET 0x4c
> +#define PM_INFO_MX7_L2_V_OFFSET 0x50
> +#define PM_INFO_MX7_ANATOP_P_OFFSET 0x54
> +#define PM_INFO_MX7_ANATOP_V_OFFSET 0x58
> +#define PM_INFO_MX7_TTBR1_V_OFFSET 0x5c
> +#define PM_INFO_DDRC_REG_NUM_OFFSET 0x60
> +#define PM_INFO_DDRC_REG_OFFSET 0x64
> +#define PM_INFO_DDRC_VALUE_OFFSET 0x68
> +#define PM_INFO_DDRC_PHY_REG_NUM_OFFSET 0x164
> +#define PM_INFO_DDRC_PHY_REG_OFFSET 0x168
> +#define PM_INFO_DDRC_PHY_VALUE_OFFSET 0x16c
> +
> +#define MX7_SRC_GPR1 0x74
> +#define MX7_SRC_GPR2 0x78
> +#define GPC_PGC_FM 0xa00
> +#define ANADIG_SNVS_MISC_CTRL 0x380
> +#define DDRC_STAT 0x4
> +#define DDRC_PWRCTL 0x30
> +#define DDRC_PSTAT 0x3fc
> +#define DDRC_PCTRL_0 0x490
> +#define DDRC_DFIMISC 0x1b0
> +#define DDRC_SWCTL 0x320
> +#define DDRC_SWSTAT 0x324
> +#define DDRPHY_LP_CON0 0x18
> +
> + .align 3
> +
> + .macro disable_l1_dcache
> +
> + /*
> + * Flush all data from the L1 data cache before disabling
> + * SCTLR.C bit.
> + */
> + push {r0 - r10, lr}
> + ldr r7, =v7_flush_dcache_all
> + mov lr, pc
> + mov pc, r7
> + pop {r0 - r10, lr}
> +
> + /* disable d-cache */
> + mrc p15, 0, r7, c1, c0, 0
> + bic r7, r7, #(1 << 2)
> + mcr p15, 0, r7, c1, c0, 0
> + dsb
> + isb
> +
> + push {r0 - r10, lr}
> + ldr r7, =v7_flush_dcache_all
> + mov lr, pc
> + mov pc, r7
> + pop {r0 - r10, lr}
> +
> + .endm
> +
> +
> + .macro enable_l1_dcache
> +
> + /* Enable L1 data cache. */
> + mrc p15, 0, r6, c1, c0, 0
> + orr r6, r6, #0x4
> + mcr p15, 0, r6, c1, c0, 0
> +
> + dsb
> + isb
> +
> + .endm
> +
> +
> + .macro ddrc_enter_self_refresh
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait rw port_busy clear */
> + ldr r6, =(0x1 << 16)
> + orr r6, r6, #0x1
> +1:
> + ldr r7, [r11, #DDRC_PSTAT]
> + ands r7, r7, r6
> + bne 1b
> +
> + /* enter self-refresh bit 5 */
> + ldr r7, =(0x1 << 5)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +2:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 2b
> +3:
> + ldr r7, [r11, #DDRC_STAT]
> + ands r7, r7, #0x20
> + beq 3b
> +
> + /* disable dram clk */
> + ldr r7, [r11, #DDRC_PWRCTL]
> + orr r7, r7, #(1 << 3)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + .endm
> +
> + .macro ddrc_exit_self_refresh
> +
> + cmp r5, #0x0
> + ldreq r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldrne r11, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +4:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + beq 4b
> +
> + /* enable auto self-refresh */
> + ldr r7, [r11, #DDRC_PWRCTL]
> + orr r7, r7, #(1 << 0)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + .endm
> +
> + .macro wait_delay
> +5:
> + subs r6, r6, #0x1
> + bne 5b
> +
> + .endm
> +
> + .macro ddr_enter_retention
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PCTRL_0]
> +
> + /* wait rw port_busy clear */
> + ldr r6, =(0x1 << 16)
> + orr r6, r6, #0x1
> +6:
> + ldr r7, [r11, #DDRC_PSTAT]
> + ands r7, r7, r6
> + bne 6b
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + /* enter self-refresh bit 5 */
> + ldr r7, =(0x1 << 5)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +7:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 7b
> +8:
> + ldr r7, [r11, #DDRC_STAT]
> + ands r7, r7, #0x20
> + beq 8b
> +
> + /* disable dram clk */
> + ldr r7, =(0x1 << 5)
> + orr r7, r7, #(1 << 3)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* reset ddr_phy */
> + ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, =0x0
> + str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* delay 7 us */
> + ldr r6, =6000
> + wait_delay
> +
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldr r6, =0x1000
> + ldr r7, [r11, r6]
> + orr r7, r7, #0x1
> + str r7, [r11, r6]
> + /* turn off ddr power */
> + ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, =(0x1 << 29)
> + str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
> +
> + .endm
> +
> + .macro ddr_exit_retention
> +
> + cmp r5, #0x0
> + ldreq r1, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldrne r1, [r0, #PM_INFO_MX7_ANATOP_P_OFFSET]
> + ldreq r2, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldrne r2, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
> + ldreq r3, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldrne r3, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
> + ldreq r4, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
> + ldrne r4, [r0, #PM_INFO_MX7_DDRC_PHY_P_OFFSET]
> + ldreq r10, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
> + ldrne r10, [r0, #PM_INFO_MX7_CCM_P_OFFSET]
> + ldreq r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldrne r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_P_OFFSET]
> +
> + /* turn on ddr power */
> + ldr r7, =(0x1 << 29)
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + ldr r6, =50
> + wait_delay
> +
> + ldr r7, =0x0
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* clear ddr_phy reset */
> + ldr r6, =0x1000
> + ldr r7, [r2, r6]
> + orr r7, r7, #0x3
> + str r7, [r2, r6]
> + ldr r7, [r2, r6]
> + bic r7, r7, #0x1
> + str r7, [r2, r6]
> +
> + ldr r6, [r0, #PM_INFO_DDRC_REG_NUM_OFFSET]
> + ldr r7, =PM_INFO_DDRC_REG_OFFSET
> + add r7, r7, r0
> +9:
> + ldr r8, [r7], #0x4
> + ldr r9, [r7], #0x4
> + str r9, [r3, r8]
> + subs r6, r6, #0x1
> + bne 9b
> + ldr r7, =0x20
> + str r7, [r3, #DDRC_PWRCTL]
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_DFIMISC]
> +
> + /* do PHY, clear ddr_phy reset */
> + ldr r6, =0x1000
> + ldr r7, [r2, r6]
> + bic r7, r7, #0x2
> + str r7, [r2, r6]
> +
> + ldr r7, =(0x1 << 30)
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* need to delay ~5mS */
> + ldr r6, =0x100000
> + wait_delay
> +
> + ldr r6, [r0, #PM_INFO_DDRC_PHY_REG_NUM_OFFSET]
> + ldr r7, =PM_INFO_DDRC_PHY_REG_OFFSET
> + add r7, r7, r0
> +
> +10:
> + ldr r8, [r7], #0x4
> + ldr r9, [r7], #0x4
> + str r9, [r4, r8]
> + subs r6, r6, #0x1
> + bne 10b
> +
> + ldr r7, =0x0
> + add r9, r10, #0x4000
> + str r7, [r9, #0x130]
> +
> + cmp r5, #0x0
> + beq 101f
> + ldr r7, =0x170
> + orr r7, r7, #0x8
> + str r7, [r11, #0x20]
> +
> +101:
> + ldr r7, =0x2
> + add r9, r10, #0x4000
> + str r7, [r9, #0x130]
> +
> + ldr r7, =0xf
> + str r7, [r4, #DDRPHY_LP_CON0]
> +
> + /* wait until self-refresh mode entered */
> +11:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 11b
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_SWCTL]
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_DFIMISC]
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_SWCTL]
> +12:
> + ldr r7, [r3, #DDRC_SWSTAT]
> + and r7, r7, #0x1
> + cmp r7, #0x1
> + bne 12b
> +13:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x20
> + cmp r7, #0x20
> + bne 13b
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_PWRCTL]
> +14:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x30
> + cmp r7, #0x0
> + bne 14b
> +
> +15:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x1
> + bne 15b
> +
> + /* enable port */
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_PCTRL_0]
> +
> + .endm
> +
> +ENTRY(imx7_suspend)
> + push {r4-r12}
> +
> + /*
> + * The value of r0 is mapped the same in origin table and IRAM table,
> + * thus no need to care r0 here.
> + */
> + ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
> + ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
> + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
> + ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
> +
> + /*
> + * counting the resume address in iram
> + * to set it in SRC register.
> + */
> + ldr r6, =imx7_suspend
> + ldr r7, =resume
> + sub r7, r7, r6
> + add r8, r1, r4
> + add r9, r8, r7
> +
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + /* store physical resume addr and pm_info address. */
> + str r9, [r11, #MX7_SRC_GPR1]
> + str r1, [r11, #MX7_SRC_GPR2]
> +
> + disable_l1_dcache
> +
> + /*
> + * make sure TLB contain the addr we want,
> + * as we will access them after DDR is in
> + * self-refresh mode.
> + */
> + ldr r6, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldr r7, [r0, #0x0]
> + ldr r6, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
> + add r6, #0x4000
> + ldr r7, [r6]
> + ldr r6, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + ldr r6, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + add r6, #0x1000
> + ldr r7, [r6]
> + ldr r6, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + ldr r7, [r6, #0x490]
> + ldr r6, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
> + ldr r7, [r6, #0x0]
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq ddr_only_self_refresh
> +
> + ddr_enter_retention
> + b ddr_retention_enter_out
> +ddr_only_self_refresh:
> + ddrc_enter_self_refresh
> +ddr_retention_enter_out:
> +
> + /* Zzz, enter stop mode */
> + wfi
> + nop
> + nop
> + nop
> + nop
> +
> + mov r5, #0x0
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq wfi_ddr_self_refresh_out
> +
> + ddr_exit_retention
> + b wfi_ddr_retention_out
> +wfi_ddr_self_refresh_out:
> + ddrc_exit_self_refresh
> +wfi_ddr_retention_out:
> +
> + ldr r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldr r7, =0x170
> + orr r7, r7, #0x8
> + str r7, [r11, #0x20]
> +
> + /* clear core0's entry and parameter */
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + mov r7, #0x0
> + str r7, [r11, #MX7_SRC_GPR1]
> + str r7, [r11, #MX7_SRC_GPR2]
> +
> + enable_l1_dcache
> +
> + pop {r4-r12}
> + /* return to suspend finish */
> + mov pc, lr
> +
> +resume:
> + /* invalidate L1 I-cache first */
> + mov r6, #0x0
> + mcr p15, 0, r6, c7, c5, 0
> + mcr p15, 0, r6, c7, c5, 6
> + /* enable the Icache and branch prediction */
> + mov r6, #0x1800
> + mcr p15, 0, r6, c1, c0, 0
> + isb
> +
> + /* get physical resume address from pm_info. */
> + ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
> + /* clear core0's entry and parameter */
> + ldr r11, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
> + mov r7, #0x0
> + str r7, [r11, #MX7_SRC_GPR1]
> + str r7, [r11, #MX7_SRC_GPR2]
> +
> + mov r5, #0x1
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_P_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq dsm_ddr_self_refresh_out
> +
> + ddr_exit_retention
> + b dsm_ddr_retention_out
> +dsm_ddr_self_refresh_out:
> + ddrc_exit_self_refresh
> +dsm_ddr_retention_out:
> +
> + mov pc, lr
> +ENDPROC(imx7_suspend)
> +
> +ENTRY(ca7_cpu_resume)
> + bl v7_invalidate_l1
> + b cpu_resume
> +ENDPROC(ca7_cpu_resume)
> --
> 2.5.0.rc2
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-08-21 13:45 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-08-21 13:45 UTC (permalink / raw)
To: linux-arm-kernel
Ping.
Shenwei
> -----Original Message-----
> From: linux-kernel-owner at vger.kernel.org
> [mailto:linux-kernel-owner at vger.kernel.org] On Behalf Of Shenwei Wang
> Sent: 2015?7?31? 16:34
> To: shawn.guo at linaro.org; tglx at linutronix.de; jason at lakedaemon.net
> Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Huang
> Yongcai-B20788
> Subject: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
>
> IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions:
> power management and wakeup source management.
>
> GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4 domains.
> And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
> After configuring the GPCv2 module, the platform can enter into a selected mode
> either automatically triggered by ARM WFI instruction or manually by software.
> The system will exit the low power states by the predefined wakeup sources
> which are managed by the gpcv2 irqchip driver.
>
> This patch adds a new suspend driver to manage the power states on IMX7D.
> It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
> ---
> arch/arm/mach-imx/Kconfig | 1 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/common.h | 4 +
> arch/arm/mach-imx/pm-imx7.c | 917
> +++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> 5 files changed, 1453 insertions(+)
> create mode 100644 arch/arm/mach-imx/pm-imx7.c create mode 100644
> arch/arm/mach-imx/suspend-imx7.S
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index
> 8ceda28..54f8553 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -562,6 +562,7 @@ config SOC_IMX7D
> select ARM_GIC
> select HAVE_IMX_ANATOP
> select HAVE_IMX_MMDC
> + select IMX_GPCV2
> help
> This enables support for Freescale i.MX7 Dual processor.
>
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index
> fb689d8..60f13fd 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -88,6 +88,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
>
> ifeq ($(CONFIG_SUSPEND),y)
> AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
> +AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
> +obj-$(CONFIG_SOC_IMX7D) += suspend-imx7.o pm-imx7.o
> obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
> obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif diff --git
> a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index
> 21e4e86..c5767f4 100644
> --- a/arch/arm/mach-imx/common.h
> +++ b/arch/arm/mach-imx/common.h
> @@ -126,6 +126,10 @@ static const u32 imx53_suspend_sz; static inline void
> imx6_suspend(void __iomem *ocram_vbase) {} #endif
>
> +void ca7_cpu_resume(void);
> +void imx7_suspend(void __iomem *ocram_vbase);
> +u32 imx_gpcv2_get_wakeup_source(u32 **sources);
> +
> void imx6_pm_ccm_init(const char *ccm_compat); void imx6q_pm_init(void);
> void imx6dl_pm_init(void); diff --git a/arch/arm/mach-imx/pm-imx7.c
> b/arch/arm/mach-imx/pm-imx7.c new file mode 100644 index 0000000..052c2cb
> --- /dev/null
> +++ b/arch/arm/mach-imx/pm-imx7.c
> @@ -0,0 +1,917 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +#include <linux/suspend.h>
> +#include <linux/slab.h>
> +#include <asm/suspend.h>
> +#include <asm/fncpy.h>
> +
> +#include "common.h"
> +
> +#define GPC_LPCR_A7_BSC 0x0
> +#define GPC_LPCR_A7_AD 0x4
> +#define GPC_LPCR_M4 0x8
> +
> +#define GPC_SLPCR 0x14
> +#define GPC_PGC_ACK_SEL_A7 0x24
> +
> +#define GPC_SLOTx_CFG(x) (0xb0 + 4 * (x))
> +
> +#define GPC_PGC_CPU_MAPPING 0xec
> +
> +#define GPC_PGC_C0 0x800
> +#define GPC_PGC_C1 0x840
> +#define GPC_PGC_SCU 0x880
> +#define GPC_PGC_SCU_TIMING 0x890
> +#define GPC_PGC_FM 0xa00
> +#define GPC_PGC_MIPI_PHY 0xc00
> +#define GPC_PGC_PCIE_PHY 0xc40
> +#define GPC_PGC_USB_OTG1_PHY 0xc80
> +#define GPC_PGC_USB_OTG2_PHY 0xcc0
> +#define GPC_PGC_USB_HSIC_PHY 0xd00
> +
> +#define ANADIG_ARM_PLL 0x60
> +#define ANADIG_DDR_PLL 0x70
> +#define ANADIG_SYS_PLL 0xb0
> +#define ANADIG_ENET_PLL 0xe0
> +#define ANADIG_AUDIO_PLL 0xf0
> +#define ANADIG_VIDEO_PLL 0x130
> +
> +#define BM_LPCR_A7_AD_L2PGE (0x1 << 16)
> +#define BM_LPCR_A7_AD_EN_C1_PUP (0x1 << 11)
> +#define BM_LPCR_A7_AD_EN_C1_IRQ_PUP (0x1 << 10)
> +#define BM_LPCR_A7_AD_EN_C0_PUP (0x1 << 9)
> +#define BM_LPCR_A7_AD_EN_C0_IRQ_PUP (0x1 << 8)
> +#define BM_LPCR_A7_AD_EN_PLAT_PDN (0x1 << 4)
> +#define BM_LPCR_A7_AD_EN_C1_PDN (0x1 << 3)
> +#define BM_LPCR_A7_AD_EN_C1_WFI_PDN (0x1 << 2)
> +#define BM_LPCR_A7_AD_EN_C0_PDN (0x1 << 1)
> +#define BM_LPCR_A7_AD_EN_C0_WFI_PDN (0x1)
> +
> +#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP (0x7 << 28)
> +#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM (0x1 << 14)
> +#define BM_LPCR_A7_BSC_LPM1 (0x3 << 2)
> +#define BM_LPCR_A7_BSC_LPM0 (0x3)
> +
> +#define BM_LPCR_M4_MASK_DSM_TRIGGER (0x1 << 31)
> +
> +#define BM_SLPCR_EN_DSM (0x1 << 31)
> +#define BM_SLPCR_RBC_EN (0x1 << 30)
> +#define BM_SLPCR_VSTBY (0x1 << 2)
> +#define BM_SLPCR_SBYOS (0x1 << 1)
> +#define BM_SLPCR_BYPASS_PMIC_READY (0x1)
> +
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP (0x1 << 31)
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN (0x1 << 15)
> +
> +#define BM_ANADIG_ARM_PLL_OVERRIDE (0x1 << 20)
> +#define BM_ANADIG_DDR_PLL_OVERRIDE (0x1 << 19)
> +#define BM_ANADIG_SYS_PLL_PFDx_OVERRIDE (0x1FF << 17)
> +#define BM_ANADIG_ENET_PLL_OVERRIDE (0x1 << 13)
> +#define BM_ANADIG_AUDIO_PLL_OVERRIDE (0x1 << 24)
> +#define BM_ANADIG_VIDEO_PLL_OVERRIDE (0x1 << 24)
> +
> +#define A7_LPM_WAIT 0x5
> +#define A7_LPM_STOP 0xa
> +#define GPC_MAX_SLOT_NUMBER 10
> +
> +#define REG_SET 0x4
> +#define REG_CLR 0x8
> +
> +#define MX7_MAX_DDRC_NUM 32
> +#define MX7_MAX_DDRC_PHY_NUM 16
> +
> +#define READ_DATA_FROM_HARDWARE 0
> +#define MX7_SUSPEND_OCRAM_SIZE 0x1000
> +
> +enum gpcv2_mode {
> + GPC_WAIT_CLOCKED,
> + GPC_WAIT_UNCLOCKED,
> + GPC_STOP_POWER_ON,
> + GPC_STOP_POWER_OFF,
> +};
> +
> +/*
> + * GPCv2 has the following power domains, and each domain can be
> +power-up
> + * and power-down via GPC settings.
> + *
> + * Core 0 of A7 power domain
> + * Core1 of A7 power domain
> + * SCU/L2 cache RAM of A7 power domain
> + * Fastmix and megamix power domain
> + * USB OTG1 PHY power domain
> + * USB OTG2 PHY power domain
> + * PCIE PHY power domain
> + * USB HSIC PHY power domain
> + * Core 0 of M4 power domain
> + */
> +
> +enum gpcv2_slot {
> + CORE0_A7,
> + CORE1_A7,
> + SCU_A7,
> + FAST_MEGA_MIX,
> + MIPI_PHY,
> + PCIE_PHY,
> + USB_OTG1_PHY,
> + USB_OTG2_PHY,
> + USB_HSIC_PHY,
> + CORE0_M4,
> +};
> +
> +struct imx_gpcv2;
> +
> +struct imx_gpcv2_suspend {
> + void (*set_mode)(struct imx_gpcv2 *, enum gpcv2_mode mode);
> + void (*lpm_cpu_power_gate)(struct imx_gpcv2 *, u32, bool);
> + void (*lpm_plat_power_gate)(struct imx_gpcv2 *, bool);
> + void (*lpm_env_setup)(struct imx_gpcv2 *);
> + void (*lpm_env_clean)(struct imx_gpcv2 *);
> +
> + void (*set_slot)(struct imx_gpcv2 *cd, u32 index,
> + enum gpcv2_slot slot, bool mode);
> + void (*set_act)(struct imx_gpcv2 *cd,
> + enum gpcv2_slot slot, bool mode);
> + void (*clear_slots)(struct imx_gpcv2 *);
> + void (*lpm_enable_core)(struct imx_gpcv2 *,
> + bool enable, u32 offset);
> +
> + void (*standby)(struct imx_gpcv2 *);
> + void (*suspend)(struct imx_gpcv2 *);
> +
> + void (*suspend_fn_in_ocram)(void __iomem *ocram_vbase);
> + void __iomem *ocram_vbase;
> +};
> +
> +struct imx_gpcv2 {
> + u32 *wakeupmix_mask;
> + u32 *lpsrmix_mask;
> + u32 *mfmix_mask;
> + spinlock_t lock;
> +
> + struct imx_gpcv2_suspend *pm;
> + struct regmap *anatop;
> + struct regmap *gpcv2;
> +
> + u32 (*get_wakeup_source)(u32 **);
> +};
> +
> +struct imx7_pm_base {
> + phys_addr_t pbase;
> + void __iomem *vbase;
> +};
> +
> +struct imx7_pm_socdata {
> + u32 ddr_type;
> + const char *ddrc_compat;
> + const char *ddrc_phy_compat;
> + const char *src_compat;
> + const char *iomuxc_gpr_compat;
> + const char *ccm_compat;
> + const char *gpc_compat;
> + const char *anatop_compat;
> + const u32 ddrc_num;
> + const u32 (*ddrc_offset)[2];
> + const u32 ddrc_phy_num;
> + const u32 (*ddrc_phy_offset)[2];
> +};
> +
> +/*
> + * This structure is for passing necessary data for low level ocram
> + * suspend code(arch/arm/mach-imx/suspend-imx7.S), if this struct
> + * definition is changed, the offset definition in
> + * arch/arm/mach-imx/suspend-imx7.S must be also changed accordingly,
> + * otherwise, the suspend to ocram function will be broken!
> + */
> +
> +struct imx7_cpu_pm_info {
> + u32 m4_reserve0;
> + u32 m4_reserve1;
> + u32 m4_reserve2;
> +
> + /* The physical address of pm_info. */
> + phys_addr_t pbase;
> +
> + /* The physical resume address for asm code */
> + phys_addr_t resume_addr;
> + u32 ddr_type;
> +
> + u32 pm_info_size;
> +
> + struct imx7_pm_base ddrc_base;
> + struct imx7_pm_base ddrc_phy_base;
> + struct imx7_pm_base src_base;
> + struct imx7_pm_base iomuxc_gpr_base;
> + struct imx7_pm_base ccm_base;
> + struct imx7_pm_base gpc_base;
> + struct imx7_pm_base l2_base;
> + struct imx7_pm_base anatop_base;
> +
> + u32 ttbr1;
> +
> + /* Number of DDRC which need saved/restored. */
> + u32 ddrc_num;
> +
> + /* To save offset and value */
> + u32 ddrc_val[MX7_MAX_DDRC_NUM][2];
> +
> + /* Number of DDRC which need saved/restored. */
> + u32 ddrc_phy_num;
> +
> + /* To save offset and value */
> + u32 ddrc_phy_val[MX7_MAX_DDRC_NUM][2];
> +} __aligned(8);
> +
> +static const u32 imx7d_ddrc_ddr3_setting[][2] __initconst = {
> + { 0x0, READ_DATA_FROM_HARDWARE },
> + { 0x1a0, READ_DATA_FROM_HARDWARE },
> + { 0x1a4, READ_DATA_FROM_HARDWARE },
> + { 0x1a8, READ_DATA_FROM_HARDWARE },
> + { 0x64, READ_DATA_FROM_HARDWARE },
> + { 0x490, 0x00000001 },
> + { 0xd0, 0xc0020001 },
> + { 0xd4, READ_DATA_FROM_HARDWARE },
> + { 0xdc, READ_DATA_FROM_HARDWARE },
> + { 0xe0, READ_DATA_FROM_HARDWARE },
> + { 0xe4, READ_DATA_FROM_HARDWARE },
> + { 0xf4, READ_DATA_FROM_HARDWARE },
> + { 0x100, READ_DATA_FROM_HARDWARE },
> + { 0x104, READ_DATA_FROM_HARDWARE },
> + { 0x108, READ_DATA_FROM_HARDWARE },
> + { 0x10c, READ_DATA_FROM_HARDWARE },
> + { 0x110, READ_DATA_FROM_HARDWARE },
> + { 0x114, READ_DATA_FROM_HARDWARE },
> + { 0x120, 0x03030803 },
> + { 0x180, READ_DATA_FROM_HARDWARE },
> + { 0x190, READ_DATA_FROM_HARDWARE },
> + { 0x194, READ_DATA_FROM_HARDWARE },
> + { 0x200, READ_DATA_FROM_HARDWARE },
> + { 0x204, READ_DATA_FROM_HARDWARE },
> + { 0x214, READ_DATA_FROM_HARDWARE },
> + { 0x218, READ_DATA_FROM_HARDWARE },
> + { 0x240, 0x06000601 },
> + { 0x244, READ_DATA_FROM_HARDWARE },
> +};
> +
> +static const u32 imx7d_ddrc_phy_ddr3_setting[][2] __initconst = {
> + { 0x0, READ_DATA_FROM_HARDWARE },
> + { 0x4, READ_DATA_FROM_HARDWARE },
> + { 0x10, READ_DATA_FROM_HARDWARE },
> + { 0x9c, READ_DATA_FROM_HARDWARE },
> + { 0x20, READ_DATA_FROM_HARDWARE },
> + { 0x30, READ_DATA_FROM_HARDWARE },
> + { 0x50, 0x01000010 },
> + { 0x50, 0x00000010 },
> + { 0xc0, 0x0e407304 },
> + { 0xc0, 0x0e447304 },
> + { 0xc0, 0x0e447306 },
> + { 0xc0, 0x0e447304 },
> + { 0xc0, 0x0e407306 },
> +};
> +
> +static const struct imx7_pm_socdata imx7d_pm_data_ddr3 __initconst = {
> + .iomuxc_gpr_compat = "fsl,imx7d-iomuxc",
> + .ddrc_phy_compat = "fsl,imx7d-ddrc-phy",
> + .anatop_compat = "fsl,imx7d-anatop",
> + .ddrc_compat = "fsl,imx7d-ddrc",
> + .ccm_compat = "fsl,imx7d-ccm",
> + .src_compat = "fsl,imx7d-src",
> + .gpc_compat = "fsl,imx7d-gpc",
> + .ddrc_phy_num = ARRAY_SIZE(imx7d_ddrc_phy_ddr3_setting),
> + .ddrc_phy_offset = imx7d_ddrc_phy_ddr3_setting,
> + .ddrc_num = ARRAY_SIZE(imx7d_ddrc_ddr3_setting),
> + .ddrc_offset = imx7d_ddrc_ddr3_setting, };
> +
> +static struct imx_gpcv2 *gpcv2_instance;
> +
> +static void imx_gpcv2_lpm_clear_slots(struct imx_gpcv2 *gpc) {
> + int i;
> +
> + for (i = 0; i < GPC_MAX_SLOT_NUMBER; i++)
> + regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(i), 0x0);
> +
> + regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7,
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP |
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
> +}
> +
> +static void imx_gpcv2_lpm_enable_core(struct imx_gpcv2 *gpc,
> + bool enable, u32 offset)
> +{
> + regmap_write(gpc->gpcv2, offset, enable); }
> +
> +static void imx_gpcv2_lpm_slot_setup(struct imx_gpcv2 *gpc,
> + u32 index, enum gpcv2_slot slot, bool powerup) {
> + u32 val;
> +
> + if (index >= GPC_MAX_SLOT_NUMBER) {
> + pr_err("Invalid slot index!\n");
> + return;
> + }
> +
> + val = (powerup ? 0x2 : 0x1) << (slot * 2);
> + regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(index), val); }
> +
> +static void imx_gpcv2_lpm_set_ack(struct imx_gpcv2 *gpc,
> + enum gpcv2_slot slot, bool powerup)
> +{
> + u32 val;
> +
> + regmap_read(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, &val);
> +
> + /* clear dummy ack */
> + val &= ~(powerup ? BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP :
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
> +
> + val |= 1 << (slot + (powerup ? 16 : 0));
> + regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, val); }
> +
> +static void imx_gpcv2_lpm_env_setup(struct imx_gpcv2 *gpc) {
> + /* PLL and PFDs overwrite set */
> + regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_SET,
> + BM_ANADIG_ARM_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_SET,
> + BM_ANADIG_DDR_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_SET,
> + BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_SET,
> + BM_ANADIG_ENET_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_SET,
> + BM_ANADIG_AUDIO_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_SET,
> + BM_ANADIG_VIDEO_PLL_OVERRIDE);
> +}
> +
> +static void imx_gpcv2_lpm_env_clean(struct imx_gpcv2 *gpc) {
> + /* PLL and PFDs overwrite clear */
> + regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_CLR,
> + BM_ANADIG_ARM_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_CLR,
> + BM_ANADIG_DDR_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_CLR,
> + BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_CLR,
> + BM_ANADIG_ENET_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_CLR,
> + BM_ANADIG_AUDIO_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_CLR,
> + BM_ANADIG_VIDEO_PLL_OVERRIDE);
> +}
> +
> +static void imx_gpcv2_lpm_set_mode(struct imx_gpcv2 *gpc,
> + enum gpcv2_mode mode)
> +{
> + u32 lpcr, slpcr;
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &lpcr);
> + regmap_read(gpc->gpcv2, GPC_SLPCR, &slpcr);
> +
> + /* all cores' LPM settings must be same */
> + lpcr &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
> + lpcr |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> +
> + slpcr &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN
> |
> + BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
> +
> + switch (mode) {
> + case GPC_WAIT_CLOCKED:
> + break;
> + case GPC_WAIT_UNCLOCKED:
> + lpcr |= A7_LPM_WAIT;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + break;
> + case GPC_STOP_POWER_ON:
> + lpcr |= A7_LPM_STOP;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
> + BM_SLPCR_BYPASS_PMIC_READY);
> + break;
> + case GPC_STOP_POWER_OFF:
> + lpcr |= A7_LPM_STOP;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
> + BM_SLPCR_SBYOS | BM_SLPCR_VSTBY |
> + BM_SLPCR_BYPASS_PMIC_READY);
> + break;
> + default:
> + return;
> + }
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, lpcr);
> + regmap_write(gpc->gpcv2, GPC_SLPCR, slpcr); }
> +
> +static void imx_gpcv2_lpm_cpu_power_gate(struct imx_gpcv2 *gpc,
> + u32 cpu, bool engate)
> +{
> + u32 val;
> +
> + const u32 val_pdn[2] = {
> + BM_LPCR_A7_AD_EN_C0_PDN | BM_LPCR_A7_AD_EN_C0_PUP,
> + BM_LPCR_A7_AD_EN_C1_PDN | BM_LPCR_A7_AD_EN_C1_PUP,
> + };
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
> + if (engate)
> + val |= val_pdn[cpu];
> + else
> + val &= ~val_pdn[cpu];
> +
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val); }
> +
> +static void imx_lpm_plat_power_gate(struct imx_gpcv2 *gpc, bool engate)
> +{
> + u32 val;
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
> + val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
> + if (engate)
> + val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
> +
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val); }
> +
> +static void imx_gpcv2_lpm_standby(struct imx_gpcv2 *gpc) {
> + struct imx_gpcv2_suspend *pm = gpc->pm;
> +
> + pm->lpm_env_setup(gpc);
> + /* pm->set_mode(gpc, GPC_STOP_POWER_OFF); */
> + pm->set_mode(gpc, GPC_WAIT_UNCLOCKED);
> +
> + /* Zzz ... */
> + cpu_do_idle();
> +
> + pm->set_mode(gpc, GPC_WAIT_CLOCKED);
> + pm->lpm_env_clean(gpc);
> +}
> +
> +static int gpcv2_suspend_finish(unsigned long val) {
> + struct imx_gpcv2_suspend *pm = (struct imx_gpcv2_suspend *)val;
> +
> + if (!pm->suspend_fn_in_ocram) {
> + cpu_do_idle();
> + } else {
> + /*
> + * call low level suspend function in ocram,
> + * as we need to float DDR IO.
> + */
> + local_flush_tlb_all();
> + pm->suspend_fn_in_ocram(pm->ocram_vbase);
> + }
> +
> + return 0;
> +}
> +
> +static void imx_gpcv2_lpm_suspend(struct imx_gpcv2 *gpc) {
> + struct imx_gpcv2_suspend *pm = gpc->pm;
> + u32 *sources;
> + int i, num;
> +
> + pm->lpm_env_setup(gpc);
> + pm->set_mode(gpc, GPC_STOP_POWER_OFF);
> +
> + /* enable core0 power down/up with low power mode */
> + pm->lpm_cpu_power_gate(gpc, 0, true);
> +
> + /* enable plat power down with low power mode */
> + pm->lpm_plat_power_gate(gpc, true);
> +
> + /*
> + * To avoid confuse, we use slot 0~4 for power down,
> + * slot 5~9 for power up.
> + *
> + * Power down slot sequence:
> + * Slot0 -> CORE0
> + * Slot1 -> Mega/Fast MIX
> + * Slot2 -> SCU
> + *
> + * Power up slot sequence:
> + * Slot5 -> Mega/Fast MIX
> + * Slot6 -> SCU
> + * Slot7 -> CORE0
> + */
> + pm->set_slot(gpc, 0, CORE0_A7, false);
> + pm->set_slot(gpc, 2, SCU_A7, false);
> +
> + if (gpc->get_wakeup_source) {
> + pm->set_slot(gpc, 1, FAST_MEGA_MIX, false);
> + pm->set_slot(gpc, 5, FAST_MEGA_MIX, true);
> + pm->lpm_enable_core(gpc, true, GPC_PGC_FM);
> + num = gpc->get_wakeup_source(&sources);
> + for (i = 0; i < num; i++) {
> + if ((~sources[i] & gpc->mfmix_mask[i]) == 0)
> + continue;
> + pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
> + break;
> + }
> + }
> +
> + pm->set_slot(gpc, 6, SCU_A7, true);
> + pm->set_slot(gpc, 7, CORE0_A7, true);
> +
> + /* Set Power down act */
> + pm->set_act(gpc, SCU_A7, false);
> +
> + /* Set Power up act */
> + pm->set_act(gpc, CORE0_A7, true);
> +
> + /* enable core0, scu */
> + pm->lpm_enable_core(gpc, true, GPC_PGC_C0);
> + pm->lpm_enable_core(gpc, true, GPC_PGC_SCU);
> +
> + cpu_suspend((unsigned long)pm, gpcv2_suspend_finish);
> +
> + pm->lpm_env_clean(gpc);
> + pm->set_mode(gpc, GPC_WAIT_CLOCKED);
> + pm->lpm_cpu_power_gate(gpc, 0, false);
> + pm->lpm_plat_power_gate(gpc, false);
> +
> + pm->lpm_enable_core(gpc, false, GPC_PGC_C0);
> + pm->lpm_enable_core(gpc, false, GPC_PGC_SCU);
> + pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
> + pm->clear_slots(gpc);
> +}
> +
> +static int imx_gpcv2_pm_enter(suspend_state_t state) {
> + struct imx_gpcv2_suspend *pm;
> +
> + BUG_ON(!gpcv2_instance);
> + pm = gpcv2_instance->pm;
> +
> + switch (state) {
> + case PM_SUSPEND_STANDBY:
> + pm->standby(gpcv2_instance);
> + break;
> +
> + case PM_SUSPEND_MEM:
> + pm->suspend(gpcv2_instance);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int imx_gpcv2_pm_valid(suspend_state_t state) {
> + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; }
> +
> +static int __init imx_get_base_from_node(struct device_node *node,
> + struct imx7_pm_base *base)
> +{
> + struct resource res;
> + int ret = 0;
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = ioremap(res.start, resource_size(&res));
> + if (!base->vbase) {
> + iounmap(base->vbase);
> + ret = -ENOMEM;
> + }
> +put_node:
> + of_node_put(node);
> +
> + return ret;
> +}
> +
> +static int __init imx_get_base_from_dt(struct imx7_pm_base *base,
> + const char *compat)
> +{
> + struct device_node *node;
> + struct resource res;
> + int ret = 0;
> +
> + node = of_find_compatible_node(NULL, NULL, compat);
> + if (!node) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = ioremap(res.start, resource_size(&res));
> + if (!base->vbase)
> + ret = -ENOMEM;
> +
> +put_node:
> + of_node_put(node);
> +out:
> + return ret;
> +}
> +
> +static int __init imx_get_exec_base_from_dt(struct imx7_pm_base *base,
> + const char *compat)
> +{
> + struct device_node *node;
> + struct resource res;
> + int ret = 0;
> +
> + node = of_find_compatible_node(NULL, NULL, compat);
> + if (!node) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = __arm_ioremap_exec(res.start, resource_size(&res),
> +false);
> +
> + if (!base->vbase)
> + ret = -ENOMEM;
> +
> +put_node:
> + of_node_put(node);
> +out:
> + return ret;
> +}
> +
> +static int __init imx_gpcv2_suspend_init(struct imx_gpcv2_suspend *pm,
> + const struct imx7_pm_socdata *socdata) {
> + struct imx7_pm_base aips_base[3] = { {0, 0}, {0, 0}, {0, 0} };
> + struct imx7_pm_base sram_base = {0, 0};
> + struct imx7_cpu_pm_info *pm_info;
> + struct device_node *node = NULL;
> + int i, ret = 0;
> +
> + const u32 (*ddrc_phy_offset_array)[2];
> + const u32 (*ddrc_offset_array)[2];
> +
> + if (!socdata || !pm) {
> + pr_warn("%s: invalid argument!\n", __func__);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < 3; i++) {
> + node = of_find_compatible_node(node, NULL, "fsl,aips-bus");
> + if (!node) {
> + pr_warn("%s: failed to find aips %d node!\n",
> + __func__, i);
> + break;
> + }
> + ret = imx_get_base_from_node(node, &aips_base[i]);
> + if (ret) {
> + pr_warn("%s: failed to get aips[%d] base %d!\n",
> + __func__, i, ret);
> + }
> + }
> +
> + ret = imx_get_exec_base_from_dt(&sram_base, "fsl,lpm-sram");
> + if (ret) {
> + pr_warn("%s: failed to get lpm-sram base %d!\n",
> + __func__, ret);
> + goto lpm_sram_map_failed;
> + }
> +
> + pm_info = sram_base.vbase;
> + pm_info->pbase = sram_base.pbase;
> + pm_info->resume_addr = virt_to_phys(ca7_cpu_resume);
> + pm_info->pm_info_size = sizeof(*pm_info);
> +
> + ret = imx_get_base_from_dt(&pm_info->ccm_base,
> socdata->ccm_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
> + goto ccm_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->ddrc_base,
> socdata->ddrc_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ddrc base %d!\n", __func__, ret);
> + goto ddrc_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->ddrc_phy_base,
> + socdata->ddrc_phy_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ddrc_phy base %d!\n", __func__, ret);
> + goto ddrc_phy_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->src_base, socdata->src_compat);
> + if (ret) {
> + pr_warn("%s: failed to get src base %d!\n", __func__, ret);
> + goto src_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->iomuxc_gpr_base,
> + socdata->iomuxc_gpr_compat);
> + if (ret) {
> + pr_warn("%s: failed to get iomuxc_gpr base %d!\n",
> + __func__, ret);
> + goto iomuxc_gpr_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->gpc_base, socdata->gpc_compat);
> + if (ret) {
> + pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
> + goto gpc_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->anatop_base,
> + socdata->anatop_compat);
> + if (ret) {
> + pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
> + goto anatop_map_failed;
> + }
> +
> + pm_info->ddrc_num = socdata->ddrc_num;
> + ddrc_offset_array = socdata->ddrc_offset;
> + pm_info->ddrc_phy_num = socdata->ddrc_phy_num;
> + ddrc_phy_offset_array = socdata->ddrc_phy_offset;
> +
> + /* initialize DDRC settings */
> + for (i = 0; i < pm_info->ddrc_num; i++) {
> + pm_info->ddrc_val[i][0] = ddrc_offset_array[i][0];
> + if (ddrc_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
> + pm_info->ddrc_val[i][1] =
> + readl_relaxed(pm_info->ddrc_base.vbase +
> + ddrc_offset_array[i][0]);
> + else
> + pm_info->ddrc_val[i][1] = ddrc_offset_array[i][1];
> + }
> +
> + /* initialize DDRC PHY settings */
> + for (i = 0; i < pm_info->ddrc_phy_num; i++) {
> + pm_info->ddrc_phy_val[i][0] =
> + ddrc_phy_offset_array[i][0];
> + if (ddrc_phy_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
> + pm_info->ddrc_phy_val[i][1] =
> + readl_relaxed(pm_info->ddrc_phy_base.vbase +
> + ddrc_phy_offset_array[i][0]);
> + else
> + pm_info->ddrc_phy_val[i][1] =
> + ddrc_phy_offset_array[i][1];
> + }
> +
> + pm->suspend_fn_in_ocram = fncpy(
> + sram_base.vbase + sizeof(*pm_info),
> + &imx7_suspend,
> + MX7_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
> + pm->ocram_vbase = sram_base.vbase;
> +
> + goto put_node;
> +
> +anatop_map_failed:
> + iounmap(pm_info->anatop_base.vbase);
> +gpc_map_failed:
> + iounmap(pm_info->gpc_base.vbase);
> +iomuxc_gpr_map_failed:
> + iounmap(pm_info->iomuxc_gpr_base.vbase);
> +src_map_failed:
> + iounmap(pm_info->src_base.vbase);
> +ddrc_phy_map_failed:
> + iounmap(pm_info->ddrc_phy_base.vbase);
> +ddrc_map_failed:
> + iounmap(pm_info->ddrc_base.vbase);
> +ccm_map_failed:
> + iounmap(pm_info->ccm_base.vbase);
> +lpm_sram_map_failed:
> + iounmap(sram_base.vbase);
> +put_node:
> + of_node_put(node);
> +
> + return ret;
> +}
> +
> +static const struct platform_suspend_ops imx_gpcv2_pm_ops = {
> + .enter = imx_gpcv2_pm_enter,
> + .valid = imx_gpcv2_pm_valid,
> +};
> +
> +static int __init imx_gpcv2_pm_init(void) {
> + struct imx_gpcv2_suspend *pm;
> + struct imx_gpcv2 *gpc;
> + int val, num;
> +
> + pm = kzalloc(sizeof(struct imx_gpcv2_suspend), GFP_KERNEL);
> + if (!pm) {
> + pr_warn("[GPCv2] %s init failed\r\n", __func__);
> + return -ENOMEM;
> + }
> +
> + gpc = kzalloc(sizeof(struct imx_gpcv2), GFP_KERNEL);
> + if (!gpc) {
> + pr_warn("[GPCv2] %s init failed\r\n", __func__);
> + kfree(pm);
> + return -ENOMEM;
> + }
> +
> + imx_gpcv2_suspend_init(pm, &imx7d_pm_data_ddr3);
> +
> + pm->lpm_env_setup = imx_gpcv2_lpm_env_setup;
> + pm->lpm_env_clean = imx_gpcv2_lpm_env_clean;
> +
> + pm->lpm_cpu_power_gate = imx_gpcv2_lpm_cpu_power_gate;
> + pm->lpm_plat_power_gate = imx_lpm_plat_power_gate;
> + pm->lpm_enable_core = imx_gpcv2_lpm_enable_core;
> + pm->set_mode = imx_gpcv2_lpm_set_mode;
> +
> + pm->clear_slots = imx_gpcv2_lpm_clear_slots;
> + pm->set_slot = imx_gpcv2_lpm_slot_setup;
> + pm->set_act = imx_gpcv2_lpm_set_ack;
> +
> + pm->standby = imx_gpcv2_lpm_standby;
> + pm->suspend = imx_gpcv2_lpm_suspend;
> +
> + gpc->anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
> + if (IS_ERR(gpc->anatop))
> + goto error_exit;
> +
> + gpc->gpcv2 = syscon_regmap_lookup_by_compatible("fsl,imx7d-gpc");
> + if (IS_ERR(gpc->gpcv2))
> + goto error_exit;
> +
> + /* only external IRQs to wake up LPM and core 0/1 */
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &val);
> + val |= BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP;
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, val);
> + /* mask m4 dsm trigger */
> + regmap_read(gpc->gpcv2, GPC_LPCR_M4, &val);
> + val |= BM_LPCR_M4_MASK_DSM_TRIGGER;
> + regmap_write(gpc->gpcv2, GPC_LPCR_M4, val);
> +
> + /* set mega/fast mix in A7 domain */
> + regmap_write(gpc->gpcv2, GPC_PGC_CPU_MAPPING, 0x1);
> + /* set SCU timing */
> + val = (0x59 << 10) | 0x5B | (0x51 << 20);
> + regmap_write(gpc->gpcv2, GPC_PGC_SCU_TIMING, val);
> +
> + gpc->pm = pm;
> + gpc->get_wakeup_source = imx_gpcv2_get_wakeup_source;
> + gpcv2_instance = gpc;
> +
> + num = imx_gpcv2_get_wakeup_source(0);
> +
> + /*
> + * The IP blocks which may be the wakeup sources are allocated into
> + * several power domains. MFMIX, LPSRMX, and WAKEUPMIX are three of
> + * those power domains. If a bit is '1' in the mask, it means the IP
> + * block is inside the power domain. The mask will be used to decide
> + * if a power domain should be shutdown or not when system goes into
> + * suspend states.
> + */
> +
> + if (num)
> + gpc->wakeupmix_mask = kzalloc(sizeof(u32)*num*3, GFP_KERNEL);
> +
> + if (!gpc->wakeupmix_mask)
> + goto error_exit;
> +
> + /*
> + * Shutdown LPSRMIX and WAKEUP power domain has not been
> + * implemented in this patch yet.
> + */
> +
> + gpc->lpsrmix_mask = gpc->wakeupmix_mask + num;
> + gpc->mfmix_mask = gpc->wakeupmix_mask + num*2;
> +
> + /* Mask the wakeup sources in M/F power domain */
> + gpc->mfmix_mask[0] = 0x54010000;
> + gpc->mfmix_mask[1] = 0xC00;
> + gpc->mfmix_mask[2] = 0x0;
> + gpc->mfmix_mask[3] = 0x400010;
> +
> + suspend_set_ops(&imx_gpcv2_pm_ops);
> + return 0;
> +
> +error_exit:
> + kfree(pm);
> + kfree(gpc);
> + return -ENODEV;
> +}
> +
> +device_initcall(imx_gpcv2_pm_init);
> diff --git a/arch/arm/mach-imx/suspend-imx7.S
> b/arch/arm/mach-imx/suspend-imx7.S
> new file mode 100644
> index 0000000..8c3f516
> --- /dev/null
> +++ b/arch/arm/mach-imx/suspend-imx7.S
> @@ -0,0 +1,529 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/asm-offsets.h>
> +#include "hardware.h"
> +
> +/*
> + * ==================== low level suspend ====================
> + *
> + * Better to follow below rules to use ARM registers:
> + * r0: pm_info structure address;
> + * r1 ~ r4: for saving pm_info members;
> + * r5 ~ r10: free registers;
> + * r11: io base address.
> + *
> + * suspend ocram space layout:
> + * ======================== high address ======================
> + * .
> + * .
> + * .
> + * ^
> + * ^
> + * ^
> + * imx7_suspend code
> + * PM_INFO structure(imx7_cpu_pm_info)
> + * ======================== low address ======================= */
> +
> +/*
> + * Below offsets are based on struct imx7_cpu_pm_info
> + * which defined in arch/arm/mach-imx/pm-imx7.c, this
> + * structure contains necessary pm info for low level
> + * suspend related code.
> + */
> +#define PM_INFO_M4_RESERVE0_OFFSET 0x0
> +#define PM_INFO_M4_RESERVE1_OFFSET 0x4
> +#define PM_INFO_M4_RESERVE2_OFFSET 0x8
> +#define PM_INFO_PBASE_OFFSET 0xc
> +#define PM_INFO_RESUME_ADDR_OFFSET 0x10
> +#define PM_INFO_DDR_TYPE_OFFSET 0x14
> +#define PM_INFO_PM_INFO_SIZE_OFFSET 0x18
> +#define PM_INFO_MX7_DDRC_P_OFFSET 0x1c
> +#define PM_INFO_MX7_DDRC_V_OFFSET 0x20
> +#define PM_INFO_MX7_DDRC_PHY_P_OFFSET 0x24
> +#define PM_INFO_MX7_DDRC_PHY_V_OFFSET 0x28
> +#define PM_INFO_MX7_SRC_P_OFFSET 0x2c
> +#define PM_INFO_MX7_SRC_V_OFFSET 0x30
> +#define PM_INFO_MX7_IOMUXC_GPR_P_OFFSET 0x34
> +#define PM_INFO_MX7_IOMUXC_GPR_V_OFFSET 0x38
> +#define PM_INFO_MX7_CCM_P_OFFSET 0x3c
> +#define PM_INFO_MX7_CCM_V_OFFSET 0x40
> +#define PM_INFO_MX7_GPC_P_OFFSET 0x44
> +#define PM_INFO_MX7_GPC_V_OFFSET 0x48
> +#define PM_INFO_MX7_L2_P_OFFSET 0x4c
> +#define PM_INFO_MX7_L2_V_OFFSET 0x50
> +#define PM_INFO_MX7_ANATOP_P_OFFSET 0x54
> +#define PM_INFO_MX7_ANATOP_V_OFFSET 0x58
> +#define PM_INFO_MX7_TTBR1_V_OFFSET 0x5c
> +#define PM_INFO_DDRC_REG_NUM_OFFSET 0x60
> +#define PM_INFO_DDRC_REG_OFFSET 0x64
> +#define PM_INFO_DDRC_VALUE_OFFSET 0x68
> +#define PM_INFO_DDRC_PHY_REG_NUM_OFFSET 0x164
> +#define PM_INFO_DDRC_PHY_REG_OFFSET 0x168
> +#define PM_INFO_DDRC_PHY_VALUE_OFFSET 0x16c
> +
> +#define MX7_SRC_GPR1 0x74
> +#define MX7_SRC_GPR2 0x78
> +#define GPC_PGC_FM 0xa00
> +#define ANADIG_SNVS_MISC_CTRL 0x380
> +#define DDRC_STAT 0x4
> +#define DDRC_PWRCTL 0x30
> +#define DDRC_PSTAT 0x3fc
> +#define DDRC_PCTRL_0 0x490
> +#define DDRC_DFIMISC 0x1b0
> +#define DDRC_SWCTL 0x320
> +#define DDRC_SWSTAT 0x324
> +#define DDRPHY_LP_CON0 0x18
> +
> + .align 3
> +
> + .macro disable_l1_dcache
> +
> + /*
> + * Flush all data from the L1 data cache before disabling
> + * SCTLR.C bit.
> + */
> + push {r0 - r10, lr}
> + ldr r7, =v7_flush_dcache_all
> + mov lr, pc
> + mov pc, r7
> + pop {r0 - r10, lr}
> +
> + /* disable d-cache */
> + mrc p15, 0, r7, c1, c0, 0
> + bic r7, r7, #(1 << 2)
> + mcr p15, 0, r7, c1, c0, 0
> + dsb
> + isb
> +
> + push {r0 - r10, lr}
> + ldr r7, =v7_flush_dcache_all
> + mov lr, pc
> + mov pc, r7
> + pop {r0 - r10, lr}
> +
> + .endm
> +
> +
> + .macro enable_l1_dcache
> +
> + /* Enable L1 data cache. */
> + mrc p15, 0, r6, c1, c0, 0
> + orr r6, r6, #0x4
> + mcr p15, 0, r6, c1, c0, 0
> +
> + dsb
> + isb
> +
> + .endm
> +
> +
> + .macro ddrc_enter_self_refresh
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait rw port_busy clear */
> + ldr r6, =(0x1 << 16)
> + orr r6, r6, #0x1
> +1:
> + ldr r7, [r11, #DDRC_PSTAT]
> + ands r7, r7, r6
> + bne 1b
> +
> + /* enter self-refresh bit 5 */
> + ldr r7, =(0x1 << 5)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +2:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 2b
> +3:
> + ldr r7, [r11, #DDRC_STAT]
> + ands r7, r7, #0x20
> + beq 3b
> +
> + /* disable dram clk */
> + ldr r7, [r11, #DDRC_PWRCTL]
> + orr r7, r7, #(1 << 3)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + .endm
> +
> + .macro ddrc_exit_self_refresh
> +
> + cmp r5, #0x0
> + ldreq r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldrne r11, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +4:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + beq 4b
> +
> + /* enable auto self-refresh */
> + ldr r7, [r11, #DDRC_PWRCTL]
> + orr r7, r7, #(1 << 0)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + .endm
> +
> + .macro wait_delay
> +5:
> + subs r6, r6, #0x1
> + bne 5b
> +
> + .endm
> +
> + .macro ddr_enter_retention
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PCTRL_0]
> +
> + /* wait rw port_busy clear */
> + ldr r6, =(0x1 << 16)
> + orr r6, r6, #0x1
> +6:
> + ldr r7, [r11, #DDRC_PSTAT]
> + ands r7, r7, r6
> + bne 6b
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + /* enter self-refresh bit 5 */
> + ldr r7, =(0x1 << 5)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +7:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 7b
> +8:
> + ldr r7, [r11, #DDRC_STAT]
> + ands r7, r7, #0x20
> + beq 8b
> +
> + /* disable dram clk */
> + ldr r7, =(0x1 << 5)
> + orr r7, r7, #(1 << 3)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* reset ddr_phy */
> + ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, =0x0
> + str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* delay 7 us */
> + ldr r6, =6000
> + wait_delay
> +
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldr r6, =0x1000
> + ldr r7, [r11, r6]
> + orr r7, r7, #0x1
> + str r7, [r11, r6]
> + /* turn off ddr power */
> + ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, =(0x1 << 29)
> + str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
> +
> + .endm
> +
> + .macro ddr_exit_retention
> +
> + cmp r5, #0x0
> + ldreq r1, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldrne r1, [r0, #PM_INFO_MX7_ANATOP_P_OFFSET]
> + ldreq r2, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldrne r2, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
> + ldreq r3, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldrne r3, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
> + ldreq r4, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
> + ldrne r4, [r0, #PM_INFO_MX7_DDRC_PHY_P_OFFSET]
> + ldreq r10, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
> + ldrne r10, [r0, #PM_INFO_MX7_CCM_P_OFFSET]
> + ldreq r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldrne r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_P_OFFSET]
> +
> + /* turn on ddr power */
> + ldr r7, =(0x1 << 29)
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + ldr r6, =50
> + wait_delay
> +
> + ldr r7, =0x0
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* clear ddr_phy reset */
> + ldr r6, =0x1000
> + ldr r7, [r2, r6]
> + orr r7, r7, #0x3
> + str r7, [r2, r6]
> + ldr r7, [r2, r6]
> + bic r7, r7, #0x1
> + str r7, [r2, r6]
> +
> + ldr r6, [r0, #PM_INFO_DDRC_REG_NUM_OFFSET]
> + ldr r7, =PM_INFO_DDRC_REG_OFFSET
> + add r7, r7, r0
> +9:
> + ldr r8, [r7], #0x4
> + ldr r9, [r7], #0x4
> + str r9, [r3, r8]
> + subs r6, r6, #0x1
> + bne 9b
> + ldr r7, =0x20
> + str r7, [r3, #DDRC_PWRCTL]
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_DFIMISC]
> +
> + /* do PHY, clear ddr_phy reset */
> + ldr r6, =0x1000
> + ldr r7, [r2, r6]
> + bic r7, r7, #0x2
> + str r7, [r2, r6]
> +
> + ldr r7, =(0x1 << 30)
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* need to delay ~5mS */
> + ldr r6, =0x100000
> + wait_delay
> +
> + ldr r6, [r0, #PM_INFO_DDRC_PHY_REG_NUM_OFFSET]
> + ldr r7, =PM_INFO_DDRC_PHY_REG_OFFSET
> + add r7, r7, r0
> +
> +10:
> + ldr r8, [r7], #0x4
> + ldr r9, [r7], #0x4
> + str r9, [r4, r8]
> + subs r6, r6, #0x1
> + bne 10b
> +
> + ldr r7, =0x0
> + add r9, r10, #0x4000
> + str r7, [r9, #0x130]
> +
> + cmp r5, #0x0
> + beq 101f
> + ldr r7, =0x170
> + orr r7, r7, #0x8
> + str r7, [r11, #0x20]
> +
> +101:
> + ldr r7, =0x2
> + add r9, r10, #0x4000
> + str r7, [r9, #0x130]
> +
> + ldr r7, =0xf
> + str r7, [r4, #DDRPHY_LP_CON0]
> +
> + /* wait until self-refresh mode entered */
> +11:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 11b
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_SWCTL]
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_DFIMISC]
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_SWCTL]
> +12:
> + ldr r7, [r3, #DDRC_SWSTAT]
> + and r7, r7, #0x1
> + cmp r7, #0x1
> + bne 12b
> +13:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x20
> + cmp r7, #0x20
> + bne 13b
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_PWRCTL]
> +14:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x30
> + cmp r7, #0x0
> + bne 14b
> +
> +15:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x1
> + bne 15b
> +
> + /* enable port */
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_PCTRL_0]
> +
> + .endm
> +
> +ENTRY(imx7_suspend)
> + push {r4-r12}
> +
> + /*
> + * The value of r0 is mapped the same in origin table and IRAM table,
> + * thus no need to care r0 here.
> + */
> + ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
> + ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
> + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
> + ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
> +
> + /*
> + * counting the resume address in iram
> + * to set it in SRC register.
> + */
> + ldr r6, =imx7_suspend
> + ldr r7, =resume
> + sub r7, r7, r6
> + add r8, r1, r4
> + add r9, r8, r7
> +
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + /* store physical resume addr and pm_info address. */
> + str r9, [r11, #MX7_SRC_GPR1]
> + str r1, [r11, #MX7_SRC_GPR2]
> +
> + disable_l1_dcache
> +
> + /*
> + * make sure TLB contain the addr we want,
> + * as we will access them after DDR is in
> + * self-refresh mode.
> + */
> + ldr r6, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldr r7, [r0, #0x0]
> + ldr r6, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
> + add r6, #0x4000
> + ldr r7, [r6]
> + ldr r6, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + ldr r6, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + add r6, #0x1000
> + ldr r7, [r6]
> + ldr r6, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + ldr r7, [r6, #0x490]
> + ldr r6, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
> + ldr r7, [r6, #0x0]
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq ddr_only_self_refresh
> +
> + ddr_enter_retention
> + b ddr_retention_enter_out
> +ddr_only_self_refresh:
> + ddrc_enter_self_refresh
> +ddr_retention_enter_out:
> +
> + /* Zzz, enter stop mode */
> + wfi
> + nop
> + nop
> + nop
> + nop
> +
> + mov r5, #0x0
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq wfi_ddr_self_refresh_out
> +
> + ddr_exit_retention
> + b wfi_ddr_retention_out
> +wfi_ddr_self_refresh_out:
> + ddrc_exit_self_refresh
> +wfi_ddr_retention_out:
> +
> + ldr r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldr r7, =0x170
> + orr r7, r7, #0x8
> + str r7, [r11, #0x20]
> +
> + /* clear core0's entry and parameter */
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + mov r7, #0x0
> + str r7, [r11, #MX7_SRC_GPR1]
> + str r7, [r11, #MX7_SRC_GPR2]
> +
> + enable_l1_dcache
> +
> + pop {r4-r12}
> + /* return to suspend finish */
> + mov pc, lr
> +
> +resume:
> + /* invalidate L1 I-cache first */
> + mov r6, #0x0
> + mcr p15, 0, r6, c7, c5, 0
> + mcr p15, 0, r6, c7, c5, 6
> + /* enable the Icache and branch prediction */
> + mov r6, #0x1800
> + mcr p15, 0, r6, c1, c0, 0
> + isb
> +
> + /* get physical resume address from pm_info. */
> + ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
> + /* clear core0's entry and parameter */
> + ldr r11, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
> + mov r7, #0x0
> + str r7, [r11, #MX7_SRC_GPR1]
> + str r7, [r11, #MX7_SRC_GPR2]
> +
> + mov r5, #0x1
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_P_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq dsm_ddr_self_refresh_out
> +
> + ddr_exit_retention
> + b dsm_ddr_retention_out
> +dsm_ddr_self_refresh_out:
> + ddrc_exit_self_refresh
> +dsm_ddr_retention_out:
> +
> + mov pc, lr
> +ENDPROC(imx7_suspend)
> +
> +ENTRY(ca7_cpu_resume)
> + bl v7_invalidate_l1
> + b cpu_resume
> +ENDPROC(ca7_cpu_resume)
> --
> 2.5.0.rc2
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
2015-07-31 21:33 ` Shenwei Wang
@ 2015-08-23 10:57 ` Thomas Gleixner
-1 siblings, 0 replies; 36+ messages in thread
From: Thomas Gleixner @ 2015-08-23 10:57 UTC (permalink / raw)
To: Shenwei Wang; +Cc: shawn.guo, jason, linux-arm-kernel, linux-kernel, b20788
On Fri, 31 Jul 2015, Shenwei Wang wrote:
> +struct gpcv2_irqchip_data {
> + struct raw_spinlock rlock;
> + void __iomem *gpc_base;
> + u32 wakeup_sources[IMR_NUM];
> + u32 enabled_irqs[IMR_NUM];
> + u32 cpu2wakeup;
Can you please format that in a readable way?
struct raw_spinlock rlock;
void __iomem *gpc_base;
....
> +};
> +
> +static struct gpcv2_irqchip_data *imx_gpcv2_instance;
> +
> +u32 imx_gpcv2_get_wakeup_source(u32 **sources)
> +{
> + if (!imx_gpcv2_instance)
> + return 0;
> +
> + if (sources)
> + *sources = imx_gpcv2_instance->wakeup_sources;
> +
> + return IMR_NUM;
> +}
> +
> +static int gpcv2_wakeup_source_save(void)
> +{
> + struct gpcv2_irqchip_data *cd;
> + void __iomem *reg;
> + int i;
> +
> + cd = imx_gpcv2_instance;
> + if (!cd)
> + return 0;
> +
> + for (i = 0; i < IMR_NUM; i++) {
> + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> + cd->enabled_irqs[i] = readl_relaxed(reg);
You read the full state of the register and restore the full state. So
why enabled_irqs?
> + writel_relaxed(cd->wakeup_sources[i], reg);
> + }
> +
> + return 0;
> +}
> +
> +static void gpcv2_wakeup_source_restore(void)
> +{
> + struct gpcv2_irqchip_data *cd;
> + void __iomem *reg;
> + int i;
> +
> + cd = imx_gpcv2_instance;
> + if (!cd)
> + return;
> +
> + for (i = 0; i < IMR_NUM; i++) {
> + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> + writel_relaxed(cd->enabled_irqs[i], reg);
> + cd->wakeup_sources[i] = ~0;
Why are you clearing that info on resume? Drivers will clear that via
set_wake() or leave it when they want to have resume functionality?
> +static int __init imx_gpcv2_irqchip_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct irq_domain *parent_domain, *domain;
> + struct gpcv2_irqchip_data *cd;
> + int i;
> +
> + if (!parent) {
> + pr_err("%s: no parent, giving up\n", node->full_name);
> + return -ENODEV;
> + }
> +
> + parent_domain = irq_find_host(parent);
> + if (!parent_domain) {
> + pr_err("%s: unable to get parent domain\n", node->full_name);
> + return -ENXIO;
> + }
> +
> + cd = kzalloc(sizeof(struct gpcv2_irqchip_data), GFP_KERNEL);
> + BUG_ON(!cd);
You return an error code for all other failures. Why BUG here?
Otherwise this looks very clean now. Can you please resend ASAP with
these minor points addressed?
Thanks,
tglx
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
@ 2015-08-23 10:57 ` Thomas Gleixner
0 siblings, 0 replies; 36+ messages in thread
From: Thomas Gleixner @ 2015-08-23 10:57 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 31 Jul 2015, Shenwei Wang wrote:
> +struct gpcv2_irqchip_data {
> + struct raw_spinlock rlock;
> + void __iomem *gpc_base;
> + u32 wakeup_sources[IMR_NUM];
> + u32 enabled_irqs[IMR_NUM];
> + u32 cpu2wakeup;
Can you please format that in a readable way?
struct raw_spinlock rlock;
void __iomem *gpc_base;
....
> +};
> +
> +static struct gpcv2_irqchip_data *imx_gpcv2_instance;
> +
> +u32 imx_gpcv2_get_wakeup_source(u32 **sources)
> +{
> + if (!imx_gpcv2_instance)
> + return 0;
> +
> + if (sources)
> + *sources = imx_gpcv2_instance->wakeup_sources;
> +
> + return IMR_NUM;
> +}
> +
> +static int gpcv2_wakeup_source_save(void)
> +{
> + struct gpcv2_irqchip_data *cd;
> + void __iomem *reg;
> + int i;
> +
> + cd = imx_gpcv2_instance;
> + if (!cd)
> + return 0;
> +
> + for (i = 0; i < IMR_NUM; i++) {
> + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> + cd->enabled_irqs[i] = readl_relaxed(reg);
You read the full state of the register and restore the full state. So
why enabled_irqs?
> + writel_relaxed(cd->wakeup_sources[i], reg);
> + }
> +
> + return 0;
> +}
> +
> +static void gpcv2_wakeup_source_restore(void)
> +{
> + struct gpcv2_irqchip_data *cd;
> + void __iomem *reg;
> + int i;
> +
> + cd = imx_gpcv2_instance;
> + if (!cd)
> + return;
> +
> + for (i = 0; i < IMR_NUM; i++) {
> + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> + writel_relaxed(cd->enabled_irqs[i], reg);
> + cd->wakeup_sources[i] = ~0;
Why are you clearing that info on resume? Drivers will clear that via
set_wake() or leave it when they want to have resume functionality?
> +static int __init imx_gpcv2_irqchip_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct irq_domain *parent_domain, *domain;
> + struct gpcv2_irqchip_data *cd;
> + int i;
> +
> + if (!parent) {
> + pr_err("%s: no parent, giving up\n", node->full_name);
> + return -ENODEV;
> + }
> +
> + parent_domain = irq_find_host(parent);
> + if (!parent_domain) {
> + pr_err("%s: unable to get parent domain\n", node->full_name);
> + return -ENXIO;
> + }
> +
> + cd = kzalloc(sizeof(struct gpcv2_irqchip_data), GFP_KERNEL);
> + BUG_ON(!cd);
You return an error code for all other failures. Why BUG here?
Otherwise this looks very clean now. Can you please resend ASAP with
these minor points addressed?
Thanks,
tglx
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
2015-08-23 10:57 ` Thomas Gleixner
@ 2015-08-24 16:09 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-08-24 16:09 UTC (permalink / raw)
To: Thomas Gleixner
Cc: shawn.guo, jason, linux-arm-kernel, linux-kernel, Huang Anson
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 3847 bytes --]
> -----Original Message-----
> From: Thomas Gleixner [mailto:tglx@linutronix.de]
> Sent: 2015Äê8ÔÂ23ÈÕ 5:58
> To: Wang Shenwei-B38339
> Cc: shawn.guo@linaro.org; jason@lakedaemon.net;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Huang
> Yongcai-B20788
> Subject: Re: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup
> sources
>
> On Fri, 31 Jul 2015, Shenwei Wang wrote:
> > +struct gpcv2_irqchip_data {
> > + struct raw_spinlock rlock;
> > + void __iomem *gpc_base;
> > + u32 wakeup_sources[IMR_NUM];
> > + u32 enabled_irqs[IMR_NUM];
> > + u32 cpu2wakeup;
>
> Can you please format that in a readable way?
>
> struct raw_spinlock rlock;
> void __iomem *gpc_base;
> ....
I did try to be careful about the format, but did not notice this one. Will change it in the new version.:)
> > +};
> > +
> > +static struct gpcv2_irqchip_data *imx_gpcv2_instance;
> > +
> > +u32 imx_gpcv2_get_wakeup_source(u32 **sources) {
> > + if (!imx_gpcv2_instance)
> > + return 0;
> > +
> > + if (sources)
> > + *sources = imx_gpcv2_instance->wakeup_sources;
> > +
> > + return IMR_NUM;
> > +}
> > +
> > +static int gpcv2_wakeup_source_save(void) {
> > + struct gpcv2_irqchip_data *cd;
> > + void __iomem *reg;
> > + int i;
> > +
> > + cd = imx_gpcv2_instance;
> > + if (!cd)
> > + return 0;
> > +
> > + for (i = 0; i < IMR_NUM; i++) {
> > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > + cd->enabled_irqs[i] = readl_relaxed(reg);
>
> You read the full state of the register and restore the full state. So why
> enabled_irqs?
There are two user scenarios:
In CPU Idle state, the system need to be woke up by any enabled irqs, not just the ones that marked as wakeup sources.
In Suspend State, they system will only be woke up by the one that marked as a wakeup source.
Enabled_irqs are used to save the values before suspend, and restore them after resume.
> > + writel_relaxed(cd->wakeup_sources[i], reg);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void gpcv2_wakeup_source_restore(void) {
> > + struct gpcv2_irqchip_data *cd;
> > + void __iomem *reg;
> > + int i;
> > +
> > + cd = imx_gpcv2_instance;
> > + if (!cd)
> > + return;
> > +
> > + for (i = 0; i < IMR_NUM; i++) {
> > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > + writel_relaxed(cd->enabled_irqs[i], reg);
> > + cd->wakeup_sources[i] = ~0;
>
> Why are you clearing that info on resume? Drivers will clear that via
> set_wake() or leave it when they want to have resume functionality?
>
Each time system goes into the suspend state, it will call set_wake (ON) again to configure
the wakeup sources. Clearing wakeup_sources here can make sure the system work as
expected no matter that a driver calls set_wake (OFF) during resume stage.
> > +static int __init imx_gpcv2_irqchip_init(struct device_node *node,
> > + struct device_node *parent) {
> > + struct irq_domain *parent_domain, *domain;
> > + struct gpcv2_irqchip_data *cd;
> > + int i;
> > +
> > + if (!parent) {
> > + pr_err("%s: no parent, giving up\n", node->full_name);
> > + return -ENODEV;
> > + }
> > +
> > + parent_domain = irq_find_host(parent);
> > + if (!parent_domain) {
> > + pr_err("%s: unable to get parent domain\n", node->full_name);
> > + return -ENXIO;
> > + }
> > +
> > + cd = kzalloc(sizeof(struct gpcv2_irqchip_data), GFP_KERNEL);
> > + BUG_ON(!cd);
>
> You return an error code for all other failures. Why BUG here?
Good point. To be consistent, I will change it to return an error code.
Thanks,
Shenwei
>
> Otherwise this looks very clean now. Can you please resend ASAP with these
> minor points addressed?
>
> Thanks,
>
> tglx
>
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
@ 2015-08-24 16:09 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-08-24 16:09 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Thomas Gleixner [mailto:tglx at linutronix.de]
> Sent: 2015?8?23? 5:58
> To: Wang Shenwei-B38339
> Cc: shawn.guo at linaro.org; jason at lakedaemon.net;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Huang
> Yongcai-B20788
> Subject: Re: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup
> sources
>
> On Fri, 31 Jul 2015, Shenwei Wang wrote:
> > +struct gpcv2_irqchip_data {
> > + struct raw_spinlock rlock;
> > + void __iomem *gpc_base;
> > + u32 wakeup_sources[IMR_NUM];
> > + u32 enabled_irqs[IMR_NUM];
> > + u32 cpu2wakeup;
>
> Can you please format that in a readable way?
>
> struct raw_spinlock rlock;
> void __iomem *gpc_base;
> ....
I did try to be careful about the format, but did not notice this one. Will change it in the new version.:)
> > +};
> > +
> > +static struct gpcv2_irqchip_data *imx_gpcv2_instance;
> > +
> > +u32 imx_gpcv2_get_wakeup_source(u32 **sources) {
> > + if (!imx_gpcv2_instance)
> > + return 0;
> > +
> > + if (sources)
> > + *sources = imx_gpcv2_instance->wakeup_sources;
> > +
> > + return IMR_NUM;
> > +}
> > +
> > +static int gpcv2_wakeup_source_save(void) {
> > + struct gpcv2_irqchip_data *cd;
> > + void __iomem *reg;
> > + int i;
> > +
> > + cd = imx_gpcv2_instance;
> > + if (!cd)
> > + return 0;
> > +
> > + for (i = 0; i < IMR_NUM; i++) {
> > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > + cd->enabled_irqs[i] = readl_relaxed(reg);
>
> You read the full state of the register and restore the full state. So why
> enabled_irqs?
There are two user scenarios:
In CPU Idle state, the system need to be woke up by any enabled irqs, not just the ones that marked as wakeup sources.
In Suspend State, they system will only be woke up by the one that marked as a wakeup source.
Enabled_irqs are used to save the values before suspend, and restore them after resume.
> > + writel_relaxed(cd->wakeup_sources[i], reg);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void gpcv2_wakeup_source_restore(void) {
> > + struct gpcv2_irqchip_data *cd;
> > + void __iomem *reg;
> > + int i;
> > +
> > + cd = imx_gpcv2_instance;
> > + if (!cd)
> > + return;
> > +
> > + for (i = 0; i < IMR_NUM; i++) {
> > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > + writel_relaxed(cd->enabled_irqs[i], reg);
> > + cd->wakeup_sources[i] = ~0;
>
> Why are you clearing that info on resume? Drivers will clear that via
> set_wake() or leave it when they want to have resume functionality?
>
Each time system goes into the suspend state, it will call set_wake (ON) again to configure
the wakeup sources. Clearing wakeup_sources here can make sure the system work as
expected no matter that a driver calls set_wake (OFF) during resume stage.
> > +static int __init imx_gpcv2_irqchip_init(struct device_node *node,
> > + struct device_node *parent) {
> > + struct irq_domain *parent_domain, *domain;
> > + struct gpcv2_irqchip_data *cd;
> > + int i;
> > +
> > + if (!parent) {
> > + pr_err("%s: no parent, giving up\n", node->full_name);
> > + return -ENODEV;
> > + }
> > +
> > + parent_domain = irq_find_host(parent);
> > + if (!parent_domain) {
> > + pr_err("%s: unable to get parent domain\n", node->full_name);
> > + return -ENXIO;
> > + }
> > +
> > + cd = kzalloc(sizeof(struct gpcv2_irqchip_data), GFP_KERNEL);
> > + BUG_ON(!cd);
>
> You return an error code for all other failures. Why BUG here?
Good point. To be consistent, I will change it to return an error code.
Thanks,
Shenwei
>
> Otherwise this looks very clean now. Can you please resend ASAP with these
> minor points addressed?
>
> Thanks,
>
> tglx
>
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
2015-08-24 16:09 ` Shenwei Wang
@ 2015-08-24 17:37 ` Thomas Gleixner
-1 siblings, 0 replies; 36+ messages in thread
From: Thomas Gleixner @ 2015-08-24 17:37 UTC (permalink / raw)
To: Shenwei Wang
Cc: shawn.guo, jason, linux-arm-kernel, linux-kernel, Huang Anson
On Mon, 24 Aug 2015, Shenwei Wang wrote:
> > > +static int gpcv2_wakeup_source_save(void) {
> > > + struct gpcv2_irqchip_data *cd;
> > > + void __iomem *reg;
> > > + int i;
> > > +
> > > + cd = imx_gpcv2_instance;
> > > + if (!cd)
> > > + return 0;
> > > +
> > > + for (i = 0; i < IMR_NUM; i++) {
> > > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > > + cd->enabled_irqs[i] = readl_relaxed(reg);
> >
> > You read the full state of the register and restore the full state. So why
> > enabled_irqs?
>
> There are two user scenarios:
> In CPU Idle state, the system need to be woke up by any enabled
> irqs, not just the ones that marked as wakeup sources.
> In Suspend State, they system will only be woke up by the one that
> marked as a wakeup source. Enabled_irqs are used to save the values
> before suspend, and restore them after resume.
That's what you want achieve. Still you save the full content of the
registers and restore the full content. That saves/restores the
enabled and disabled interrupts. So enabled_irqs is a misnomer as you
save the full state.
> > > + writel_relaxed(cd->wakeup_sources[i], reg);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void gpcv2_wakeup_source_restore(void) {
> > > + struct gpcv2_irqchip_data *cd;
> > > + void __iomem *reg;
> > > + int i;
> > > +
> > > + cd = imx_gpcv2_instance;
> > > + if (!cd)
> > > + return;
> > > +
> > > + for (i = 0; i < IMR_NUM; i++) {
> > > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > > + writel_relaxed(cd->enabled_irqs[i], reg);
> > > + cd->wakeup_sources[i] = ~0;
> >
> > Why are you clearing that info on resume? Drivers will clear that via
> > set_wake() or leave it when they want to have resume functionality?
> >
> Each time system goes into the suspend state, it will call set_wake
> (ON) again to configure the wakeup sources. Clearing wakeup_sources
> here can make sure the system work as expected no matter that a
> driver calls set_wake (OFF) during resume stage.
We rather make sure that the drivers call set_wake(OFF) as they are
supposed to, because if they do not then the set_wake(ON) logic in the
core code will see the counter != 0 and not invoke the irq callback.
Thanks,
tglx
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
@ 2015-08-24 17:37 ` Thomas Gleixner
0 siblings, 0 replies; 36+ messages in thread
From: Thomas Gleixner @ 2015-08-24 17:37 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 24 Aug 2015, Shenwei Wang wrote:
> > > +static int gpcv2_wakeup_source_save(void) {
> > > + struct gpcv2_irqchip_data *cd;
> > > + void __iomem *reg;
> > > + int i;
> > > +
> > > + cd = imx_gpcv2_instance;
> > > + if (!cd)
> > > + return 0;
> > > +
> > > + for (i = 0; i < IMR_NUM; i++) {
> > > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > > + cd->enabled_irqs[i] = readl_relaxed(reg);
> >
> > You read the full state of the register and restore the full state. So why
> > enabled_irqs?
>
> There are two user scenarios:
> In CPU Idle state, the system need to be woke up by any enabled
> irqs, not just the ones that marked as wakeup sources.
> In Suspend State, they system will only be woke up by the one that
> marked as a wakeup source. Enabled_irqs are used to save the values
> before suspend, and restore them after resume.
That's what you want achieve. Still you save the full content of the
registers and restore the full content. That saves/restores the
enabled and disabled interrupts. So enabled_irqs is a misnomer as you
save the full state.
> > > + writel_relaxed(cd->wakeup_sources[i], reg);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void gpcv2_wakeup_source_restore(void) {
> > > + struct gpcv2_irqchip_data *cd;
> > > + void __iomem *reg;
> > > + int i;
> > > +
> > > + cd = imx_gpcv2_instance;
> > > + if (!cd)
> > > + return;
> > > +
> > > + for (i = 0; i < IMR_NUM; i++) {
> > > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > > + writel_relaxed(cd->enabled_irqs[i], reg);
> > > + cd->wakeup_sources[i] = ~0;
> >
> > Why are you clearing that info on resume? Drivers will clear that via
> > set_wake() or leave it when they want to have resume functionality?
> >
> Each time system goes into the suspend state, it will call set_wake
> (ON) again to configure the wakeup sources. Clearing wakeup_sources
> here can make sure the system work as expected no matter that a
> driver calls set_wake (OFF) during resume stage.
We rather make sure that the drivers call set_wake(OFF) as they are
supposed to, because if they do not then the set_wake(ON) logic in the
core code will see the counter != 0 and not invoke the irq callback.
Thanks,
tglx
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
2015-08-24 17:37 ` Thomas Gleixner
@ 2015-08-24 18:25 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-08-24 18:25 UTC (permalink / raw)
To: Thomas Gleixner
Cc: shawn.guo, jason, linux-arm-kernel, linux-kernel, Huang Anson
> -----Original Message-----
> From: Thomas Gleixner [mailto:tglx@linutronix.de]
> > > > +static int gpcv2_wakeup_source_save(void) {
> > > > + struct gpcv2_irqchip_data *cd;
> > > > + void __iomem *reg;
> > > > + int i;
> > > > +
> > > > + cd = imx_gpcv2_instance;
> > > > + if (!cd)
> > > > + return 0;
> > > > +
> > > > + for (i = 0; i < IMR_NUM; i++) {
> > > > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > > > + cd->enabled_irqs[i] = readl_relaxed(reg);
> > >
> > > You read the full state of the register and restore the full state.
> > > So why enabled_irqs?
> >
> > There are two user scenarios:
> > In CPU Idle state, the system need to be woke up by any enabled irqs,
> > not just the ones that marked as wakeup sources.
> > In Suspend State, they system will only be woke up by the one that
> > marked as a wakeup source. Enabled_irqs are used to save the values
> > before suspend, and restore them after resume.
>
> That's what you want achieve. Still you save the full content of the registers and
> restore the full content. That saves/restores the enabled and disabled interrupts.
> So enabled_irqs is a misnomer as you save the full state.
How about change its name to "saved_irq_mask"?
> > > set_wake() or leave it when they want to have resume functionality?
> > >
> > Each time system goes into the suspend state, it will call set_wake
> > (ON) again to configure the wakeup sources. Clearing wakeup_sources
> > here can make sure the system work as expected no matter that a driver
> > calls set_wake (OFF) during resume stage.
>
> We rather make sure that the drivers call set_wake(OFF) as they are supposed to,
> because if they do not then the set_wake(ON) logic in the core code will see the
> counter != 0 and not invoke the irq callback.
Sounds reasonable. Then I will remove this line in new patch.
Thanks,
Shenwei
> Thanks,
>
> tglx
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
@ 2015-08-24 18:25 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-08-24 18:25 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Thomas Gleixner [mailto:tglx at linutronix.de]
> > > > +static int gpcv2_wakeup_source_save(void) {
> > > > + struct gpcv2_irqchip_data *cd;
> > > > + void __iomem *reg;
> > > > + int i;
> > > > +
> > > > + cd = imx_gpcv2_instance;
> > > > + if (!cd)
> > > > + return 0;
> > > > +
> > > > + for (i = 0; i < IMR_NUM; i++) {
> > > > + reg = cd->gpc_base + cd->cpu2wakeup + i * 4;
> > > > + cd->enabled_irqs[i] = readl_relaxed(reg);
> > >
> > > You read the full state of the register and restore the full state.
> > > So why enabled_irqs?
> >
> > There are two user scenarios:
> > In CPU Idle state, the system need to be woke up by any enabled irqs,
> > not just the ones that marked as wakeup sources.
> > In Suspend State, they system will only be woke up by the one that
> > marked as a wakeup source. Enabled_irqs are used to save the values
> > before suspend, and restore them after resume.
>
> That's what you want achieve. Still you save the full content of the registers and
> restore the full content. That saves/restores the enabled and disabled interrupts.
> So enabled_irqs is a misnomer as you save the full state.
How about change its name to "saved_irq_mask"?
> > > set_wake() or leave it when they want to have resume functionality?
> > >
> > Each time system goes into the suspend state, it will call set_wake
> > (ON) again to configure the wakeup sources. Clearing wakeup_sources
> > here can make sure the system work as expected no matter that a driver
> > calls set_wake (OFF) during resume stage.
>
> We rather make sure that the drivers call set_wake(OFF) as they are supposed to,
> because if they do not then the set_wake(ON) logic in the core code will see the
> counter != 0 and not invoke the irq callback.
Sounds reasonable. Then I will remove this line in new patch.
Thanks,
Shenwei
> Thanks,
>
> tglx
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
2015-08-24 18:25 ` Shenwei Wang
@ 2015-08-24 18:31 ` Thomas Gleixner
-1 siblings, 0 replies; 36+ messages in thread
From: Thomas Gleixner @ 2015-08-24 18:31 UTC (permalink / raw)
To: Shenwei Wang
Cc: shawn.guo, jason, linux-arm-kernel, linux-kernel, Huang Anson
On Mon, 24 Aug 2015, Shenwei Wang wrote:
> > That's what you want achieve. Still you save the full content of the registers and
> > restore the full content. That saves/restores the enabled and disabled interrupts.
> > So enabled_irqs is a misnomer as you save the full state.
>
> How about change its name to "saved_irq_mask"?
Way better.
Thanks,
tglx
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources
@ 2015-08-24 18:31 ` Thomas Gleixner
0 siblings, 0 replies; 36+ messages in thread
From: Thomas Gleixner @ 2015-08-24 18:31 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 24 Aug 2015, Shenwei Wang wrote:
> > That's what you want achieve. Still you save the full content of the registers and
> > restore the full content. That saves/restores the enabled and disabled interrupts.
> > So enabled_irqs is a misnomer as you save the full state.
>
> How about change its name to "saved_irq_mask"?
Way better.
Thanks,
tglx
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-07-31 21:33 ` Shenwei Wang
@ 2015-09-03 20:41 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-09-03 20:41 UTC (permalink / raw)
To: shawn.guo, tglx, jason; +Cc: linux-arm-kernel, linux-kernel, Huang Anson
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 43046 bytes --]
2nd ping.
Shenwei
> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org
> [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Shenwei Wang
> Sent: 2015Äê7ÔÂ31ÈÕ 16:34
> To: shawn.guo@linaro.org; tglx@linutronix.de; jason@lakedaemon.net
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Huang
> Yongcai-B20788
> Subject: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
>
> IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions:
> power management and wakeup source management.
>
> GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4 domains.
> And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
> After configuring the GPCv2 module, the platform can enter into a selected mode
> either automatically triggered by ARM WFI instruction or manually by software.
> The system will exit the low power states by the predefined wakeup sources
> which are managed by the gpcv2 irqchip driver.
>
> This patch adds a new suspend driver to manage the power states on IMX7D.
> It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
> ---
> arch/arm/mach-imx/Kconfig | 1 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/common.h | 4 +
> arch/arm/mach-imx/pm-imx7.c | 917
> +++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> 5 files changed, 1453 insertions(+)
> create mode 100644 arch/arm/mach-imx/pm-imx7.c create mode 100644
> arch/arm/mach-imx/suspend-imx7.S
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index
> 8ceda28..54f8553 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -562,6 +562,7 @@ config SOC_IMX7D
> select ARM_GIC
> select HAVE_IMX_ANATOP
> select HAVE_IMX_MMDC
> + select IMX_GPCV2
> help
> This enables support for Freescale i.MX7 Dual processor.
>
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index
> fb689d8..60f13fd 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -88,6 +88,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
>
> ifeq ($(CONFIG_SUSPEND),y)
> AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
> +AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
> +obj-$(CONFIG_SOC_IMX7D) += suspend-imx7.o pm-imx7.o
> obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
> obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif diff --git
> a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index
> 21e4e86..c5767f4 100644
> --- a/arch/arm/mach-imx/common.h
> +++ b/arch/arm/mach-imx/common.h
> @@ -126,6 +126,10 @@ static const u32 imx53_suspend_sz; static inline void
> imx6_suspend(void __iomem *ocram_vbase) {} #endif
>
> +void ca7_cpu_resume(void);
> +void imx7_suspend(void __iomem *ocram_vbase);
> +u32 imx_gpcv2_get_wakeup_source(u32 **sources);
> +
> void imx6_pm_ccm_init(const char *ccm_compat); void imx6q_pm_init(void);
> void imx6dl_pm_init(void); diff --git a/arch/arm/mach-imx/pm-imx7.c
> b/arch/arm/mach-imx/pm-imx7.c new file mode 100644 index 0000000..052c2cb
> --- /dev/null
> +++ b/arch/arm/mach-imx/pm-imx7.c
> @@ -0,0 +1,917 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +#include <linux/suspend.h>
> +#include <linux/slab.h>
> +#include <asm/suspend.h>
> +#include <asm/fncpy.h>
> +
> +#include "common.h"
> +
> +#define GPC_LPCR_A7_BSC 0x0
> +#define GPC_LPCR_A7_AD 0x4
> +#define GPC_LPCR_M4 0x8
> +
> +#define GPC_SLPCR 0x14
> +#define GPC_PGC_ACK_SEL_A7 0x24
> +
> +#define GPC_SLOTx_CFG(x) (0xb0 + 4 * (x))
> +
> +#define GPC_PGC_CPU_MAPPING 0xec
> +
> +#define GPC_PGC_C0 0x800
> +#define GPC_PGC_C1 0x840
> +#define GPC_PGC_SCU 0x880
> +#define GPC_PGC_SCU_TIMING 0x890
> +#define GPC_PGC_FM 0xa00
> +#define GPC_PGC_MIPI_PHY 0xc00
> +#define GPC_PGC_PCIE_PHY 0xc40
> +#define GPC_PGC_USB_OTG1_PHY 0xc80
> +#define GPC_PGC_USB_OTG2_PHY 0xcc0
> +#define GPC_PGC_USB_HSIC_PHY 0xd00
> +
> +#define ANADIG_ARM_PLL 0x60
> +#define ANADIG_DDR_PLL 0x70
> +#define ANADIG_SYS_PLL 0xb0
> +#define ANADIG_ENET_PLL 0xe0
> +#define ANADIG_AUDIO_PLL 0xf0
> +#define ANADIG_VIDEO_PLL 0x130
> +
> +#define BM_LPCR_A7_AD_L2PGE (0x1 << 16)
> +#define BM_LPCR_A7_AD_EN_C1_PUP (0x1 << 11)
> +#define BM_LPCR_A7_AD_EN_C1_IRQ_PUP (0x1 << 10)
> +#define BM_LPCR_A7_AD_EN_C0_PUP (0x1 << 9)
> +#define BM_LPCR_A7_AD_EN_C0_IRQ_PUP (0x1 << 8)
> +#define BM_LPCR_A7_AD_EN_PLAT_PDN (0x1 << 4)
> +#define BM_LPCR_A7_AD_EN_C1_PDN (0x1 << 3)
> +#define BM_LPCR_A7_AD_EN_C1_WFI_PDN (0x1 << 2)
> +#define BM_LPCR_A7_AD_EN_C0_PDN (0x1 << 1)
> +#define BM_LPCR_A7_AD_EN_C0_WFI_PDN (0x1)
> +
> +#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP (0x7 << 28)
> +#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM (0x1 << 14)
> +#define BM_LPCR_A7_BSC_LPM1 (0x3 << 2)
> +#define BM_LPCR_A7_BSC_LPM0 (0x3)
> +
> +#define BM_LPCR_M4_MASK_DSM_TRIGGER (0x1 << 31)
> +
> +#define BM_SLPCR_EN_DSM (0x1 << 31)
> +#define BM_SLPCR_RBC_EN (0x1 << 30)
> +#define BM_SLPCR_VSTBY (0x1 << 2)
> +#define BM_SLPCR_SBYOS (0x1 << 1)
> +#define BM_SLPCR_BYPASS_PMIC_READY (0x1)
> +
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP (0x1 << 31)
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN (0x1 << 15)
> +
> +#define BM_ANADIG_ARM_PLL_OVERRIDE (0x1 << 20)
> +#define BM_ANADIG_DDR_PLL_OVERRIDE (0x1 << 19)
> +#define BM_ANADIG_SYS_PLL_PFDx_OVERRIDE (0x1FF << 17)
> +#define BM_ANADIG_ENET_PLL_OVERRIDE (0x1 << 13)
> +#define BM_ANADIG_AUDIO_PLL_OVERRIDE (0x1 << 24)
> +#define BM_ANADIG_VIDEO_PLL_OVERRIDE (0x1 << 24)
> +
> +#define A7_LPM_WAIT 0x5
> +#define A7_LPM_STOP 0xa
> +#define GPC_MAX_SLOT_NUMBER 10
> +
> +#define REG_SET 0x4
> +#define REG_CLR 0x8
> +
> +#define MX7_MAX_DDRC_NUM 32
> +#define MX7_MAX_DDRC_PHY_NUM 16
> +
> +#define READ_DATA_FROM_HARDWARE 0
> +#define MX7_SUSPEND_OCRAM_SIZE 0x1000
> +
> +enum gpcv2_mode {
> + GPC_WAIT_CLOCKED,
> + GPC_WAIT_UNCLOCKED,
> + GPC_STOP_POWER_ON,
> + GPC_STOP_POWER_OFF,
> +};
> +
> +/*
> + * GPCv2 has the following power domains, and each domain can be
> +power-up
> + * and power-down via GPC settings.
> + *
> + * Core 0 of A7 power domain
> + * Core1 of A7 power domain
> + * SCU/L2 cache RAM of A7 power domain
> + * Fastmix and megamix power domain
> + * USB OTG1 PHY power domain
> + * USB OTG2 PHY power domain
> + * PCIE PHY power domain
> + * USB HSIC PHY power domain
> + * Core 0 of M4 power domain
> + */
> +
> +enum gpcv2_slot {
> + CORE0_A7,
> + CORE1_A7,
> + SCU_A7,
> + FAST_MEGA_MIX,
> + MIPI_PHY,
> + PCIE_PHY,
> + USB_OTG1_PHY,
> + USB_OTG2_PHY,
> + USB_HSIC_PHY,
> + CORE0_M4,
> +};
> +
> +struct imx_gpcv2;
> +
> +struct imx_gpcv2_suspend {
> + void (*set_mode)(struct imx_gpcv2 *, enum gpcv2_mode mode);
> + void (*lpm_cpu_power_gate)(struct imx_gpcv2 *, u32, bool);
> + void (*lpm_plat_power_gate)(struct imx_gpcv2 *, bool);
> + void (*lpm_env_setup)(struct imx_gpcv2 *);
> + void (*lpm_env_clean)(struct imx_gpcv2 *);
> +
> + void (*set_slot)(struct imx_gpcv2 *cd, u32 index,
> + enum gpcv2_slot slot, bool mode);
> + void (*set_act)(struct imx_gpcv2 *cd,
> + enum gpcv2_slot slot, bool mode);
> + void (*clear_slots)(struct imx_gpcv2 *);
> + void (*lpm_enable_core)(struct imx_gpcv2 *,
> + bool enable, u32 offset);
> +
> + void (*standby)(struct imx_gpcv2 *);
> + void (*suspend)(struct imx_gpcv2 *);
> +
> + void (*suspend_fn_in_ocram)(void __iomem *ocram_vbase);
> + void __iomem *ocram_vbase;
> +};
> +
> +struct imx_gpcv2 {
> + u32 *wakeupmix_mask;
> + u32 *lpsrmix_mask;
> + u32 *mfmix_mask;
> + spinlock_t lock;
> +
> + struct imx_gpcv2_suspend *pm;
> + struct regmap *anatop;
> + struct regmap *gpcv2;
> +
> + u32 (*get_wakeup_source)(u32 **);
> +};
> +
> +struct imx7_pm_base {
> + phys_addr_t pbase;
> + void __iomem *vbase;
> +};
> +
> +struct imx7_pm_socdata {
> + u32 ddr_type;
> + const char *ddrc_compat;
> + const char *ddrc_phy_compat;
> + const char *src_compat;
> + const char *iomuxc_gpr_compat;
> + const char *ccm_compat;
> + const char *gpc_compat;
> + const char *anatop_compat;
> + const u32 ddrc_num;
> + const u32 (*ddrc_offset)[2];
> + const u32 ddrc_phy_num;
> + const u32 (*ddrc_phy_offset)[2];
> +};
> +
> +/*
> + * This structure is for passing necessary data for low level ocram
> + * suspend code(arch/arm/mach-imx/suspend-imx7.S), if this struct
> + * definition is changed, the offset definition in
> + * arch/arm/mach-imx/suspend-imx7.S must be also changed accordingly,
> + * otherwise, the suspend to ocram function will be broken!
> + */
> +
> +struct imx7_cpu_pm_info {
> + u32 m4_reserve0;
> + u32 m4_reserve1;
> + u32 m4_reserve2;
> +
> + /* The physical address of pm_info. */
> + phys_addr_t pbase;
> +
> + /* The physical resume address for asm code */
> + phys_addr_t resume_addr;
> + u32 ddr_type;
> +
> + u32 pm_info_size;
> +
> + struct imx7_pm_base ddrc_base;
> + struct imx7_pm_base ddrc_phy_base;
> + struct imx7_pm_base src_base;
> + struct imx7_pm_base iomuxc_gpr_base;
> + struct imx7_pm_base ccm_base;
> + struct imx7_pm_base gpc_base;
> + struct imx7_pm_base l2_base;
> + struct imx7_pm_base anatop_base;
> +
> + u32 ttbr1;
> +
> + /* Number of DDRC which need saved/restored. */
> + u32 ddrc_num;
> +
> + /* To save offset and value */
> + u32 ddrc_val[MX7_MAX_DDRC_NUM][2];
> +
> + /* Number of DDRC which need saved/restored. */
> + u32 ddrc_phy_num;
> +
> + /* To save offset and value */
> + u32 ddrc_phy_val[MX7_MAX_DDRC_NUM][2];
> +} __aligned(8);
> +
> +static const u32 imx7d_ddrc_ddr3_setting[][2] __initconst = {
> + { 0x0, READ_DATA_FROM_HARDWARE },
> + { 0x1a0, READ_DATA_FROM_HARDWARE },
> + { 0x1a4, READ_DATA_FROM_HARDWARE },
> + { 0x1a8, READ_DATA_FROM_HARDWARE },
> + { 0x64, READ_DATA_FROM_HARDWARE },
> + { 0x490, 0x00000001 },
> + { 0xd0, 0xc0020001 },
> + { 0xd4, READ_DATA_FROM_HARDWARE },
> + { 0xdc, READ_DATA_FROM_HARDWARE },
> + { 0xe0, READ_DATA_FROM_HARDWARE },
> + { 0xe4, READ_DATA_FROM_HARDWARE },
> + { 0xf4, READ_DATA_FROM_HARDWARE },
> + { 0x100, READ_DATA_FROM_HARDWARE },
> + { 0x104, READ_DATA_FROM_HARDWARE },
> + { 0x108, READ_DATA_FROM_HARDWARE },
> + { 0x10c, READ_DATA_FROM_HARDWARE },
> + { 0x110, READ_DATA_FROM_HARDWARE },
> + { 0x114, READ_DATA_FROM_HARDWARE },
> + { 0x120, 0x03030803 },
> + { 0x180, READ_DATA_FROM_HARDWARE },
> + { 0x190, READ_DATA_FROM_HARDWARE },
> + { 0x194, READ_DATA_FROM_HARDWARE },
> + { 0x200, READ_DATA_FROM_HARDWARE },
> + { 0x204, READ_DATA_FROM_HARDWARE },
> + { 0x214, READ_DATA_FROM_HARDWARE },
> + { 0x218, READ_DATA_FROM_HARDWARE },
> + { 0x240, 0x06000601 },
> + { 0x244, READ_DATA_FROM_HARDWARE },
> +};
> +
> +static const u32 imx7d_ddrc_phy_ddr3_setting[][2] __initconst = {
> + { 0x0, READ_DATA_FROM_HARDWARE },
> + { 0x4, READ_DATA_FROM_HARDWARE },
> + { 0x10, READ_DATA_FROM_HARDWARE },
> + { 0x9c, READ_DATA_FROM_HARDWARE },
> + { 0x20, READ_DATA_FROM_HARDWARE },
> + { 0x30, READ_DATA_FROM_HARDWARE },
> + { 0x50, 0x01000010 },
> + { 0x50, 0x00000010 },
> + { 0xc0, 0x0e407304 },
> + { 0xc0, 0x0e447304 },
> + { 0xc0, 0x0e447306 },
> + { 0xc0, 0x0e447304 },
> + { 0xc0, 0x0e407306 },
> +};
> +
> +static const struct imx7_pm_socdata imx7d_pm_data_ddr3 __initconst = {
> + .iomuxc_gpr_compat = "fsl,imx7d-iomuxc",
> + .ddrc_phy_compat = "fsl,imx7d-ddrc-phy",
> + .anatop_compat = "fsl,imx7d-anatop",
> + .ddrc_compat = "fsl,imx7d-ddrc",
> + .ccm_compat = "fsl,imx7d-ccm",
> + .src_compat = "fsl,imx7d-src",
> + .gpc_compat = "fsl,imx7d-gpc",
> + .ddrc_phy_num = ARRAY_SIZE(imx7d_ddrc_phy_ddr3_setting),
> + .ddrc_phy_offset = imx7d_ddrc_phy_ddr3_setting,
> + .ddrc_num = ARRAY_SIZE(imx7d_ddrc_ddr3_setting),
> + .ddrc_offset = imx7d_ddrc_ddr3_setting, };
> +
> +static struct imx_gpcv2 *gpcv2_instance;
> +
> +static void imx_gpcv2_lpm_clear_slots(struct imx_gpcv2 *gpc) {
> + int i;
> +
> + for (i = 0; i < GPC_MAX_SLOT_NUMBER; i++)
> + regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(i), 0x0);
> +
> + regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7,
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP |
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
> +}
> +
> +static void imx_gpcv2_lpm_enable_core(struct imx_gpcv2 *gpc,
> + bool enable, u32 offset)
> +{
> + regmap_write(gpc->gpcv2, offset, enable); }
> +
> +static void imx_gpcv2_lpm_slot_setup(struct imx_gpcv2 *gpc,
> + u32 index, enum gpcv2_slot slot, bool powerup) {
> + u32 val;
> +
> + if (index >= GPC_MAX_SLOT_NUMBER) {
> + pr_err("Invalid slot index!\n");
> + return;
> + }
> +
> + val = (powerup ? 0x2 : 0x1) << (slot * 2);
> + regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(index), val); }
> +
> +static void imx_gpcv2_lpm_set_ack(struct imx_gpcv2 *gpc,
> + enum gpcv2_slot slot, bool powerup)
> +{
> + u32 val;
> +
> + regmap_read(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, &val);
> +
> + /* clear dummy ack */
> + val &= ~(powerup ? BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP :
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
> +
> + val |= 1 << (slot + (powerup ? 16 : 0));
> + regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, val); }
> +
> +static void imx_gpcv2_lpm_env_setup(struct imx_gpcv2 *gpc) {
> + /* PLL and PFDs overwrite set */
> + regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_SET,
> + BM_ANADIG_ARM_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_SET,
> + BM_ANADIG_DDR_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_SET,
> + BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_SET,
> + BM_ANADIG_ENET_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_SET,
> + BM_ANADIG_AUDIO_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_SET,
> + BM_ANADIG_VIDEO_PLL_OVERRIDE);
> +}
> +
> +static void imx_gpcv2_lpm_env_clean(struct imx_gpcv2 *gpc) {
> + /* PLL and PFDs overwrite clear */
> + regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_CLR,
> + BM_ANADIG_ARM_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_CLR,
> + BM_ANADIG_DDR_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_CLR,
> + BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_CLR,
> + BM_ANADIG_ENET_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_CLR,
> + BM_ANADIG_AUDIO_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_CLR,
> + BM_ANADIG_VIDEO_PLL_OVERRIDE);
> +}
> +
> +static void imx_gpcv2_lpm_set_mode(struct imx_gpcv2 *gpc,
> + enum gpcv2_mode mode)
> +{
> + u32 lpcr, slpcr;
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &lpcr);
> + regmap_read(gpc->gpcv2, GPC_SLPCR, &slpcr);
> +
> + /* all cores' LPM settings must be same */
> + lpcr &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
> + lpcr |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> +
> + slpcr &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN
> |
> + BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
> +
> + switch (mode) {
> + case GPC_WAIT_CLOCKED:
> + break;
> + case GPC_WAIT_UNCLOCKED:
> + lpcr |= A7_LPM_WAIT;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + break;
> + case GPC_STOP_POWER_ON:
> + lpcr |= A7_LPM_STOP;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
> + BM_SLPCR_BYPASS_PMIC_READY);
> + break;
> + case GPC_STOP_POWER_OFF:
> + lpcr |= A7_LPM_STOP;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
> + BM_SLPCR_SBYOS | BM_SLPCR_VSTBY |
> + BM_SLPCR_BYPASS_PMIC_READY);
> + break;
> + default:
> + return;
> + }
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, lpcr);
> + regmap_write(gpc->gpcv2, GPC_SLPCR, slpcr); }
> +
> +static void imx_gpcv2_lpm_cpu_power_gate(struct imx_gpcv2 *gpc,
> + u32 cpu, bool engate)
> +{
> + u32 val;
> +
> + const u32 val_pdn[2] = {
> + BM_LPCR_A7_AD_EN_C0_PDN | BM_LPCR_A7_AD_EN_C0_PUP,
> + BM_LPCR_A7_AD_EN_C1_PDN | BM_LPCR_A7_AD_EN_C1_PUP,
> + };
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
> + if (engate)
> + val |= val_pdn[cpu];
> + else
> + val &= ~val_pdn[cpu];
> +
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val); }
> +
> +static void imx_lpm_plat_power_gate(struct imx_gpcv2 *gpc, bool engate)
> +{
> + u32 val;
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
> + val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
> + if (engate)
> + val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
> +
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val); }
> +
> +static void imx_gpcv2_lpm_standby(struct imx_gpcv2 *gpc) {
> + struct imx_gpcv2_suspend *pm = gpc->pm;
> +
> + pm->lpm_env_setup(gpc);
> + /* pm->set_mode(gpc, GPC_STOP_POWER_OFF); */
> + pm->set_mode(gpc, GPC_WAIT_UNCLOCKED);
> +
> + /* Zzz ... */
> + cpu_do_idle();
> +
> + pm->set_mode(gpc, GPC_WAIT_CLOCKED);
> + pm->lpm_env_clean(gpc);
> +}
> +
> +static int gpcv2_suspend_finish(unsigned long val) {
> + struct imx_gpcv2_suspend *pm = (struct imx_gpcv2_suspend *)val;
> +
> + if (!pm->suspend_fn_in_ocram) {
> + cpu_do_idle();
> + } else {
> + /*
> + * call low level suspend function in ocram,
> + * as we need to float DDR IO.
> + */
> + local_flush_tlb_all();
> + pm->suspend_fn_in_ocram(pm->ocram_vbase);
> + }
> +
> + return 0;
> +}
> +
> +static void imx_gpcv2_lpm_suspend(struct imx_gpcv2 *gpc) {
> + struct imx_gpcv2_suspend *pm = gpc->pm;
> + u32 *sources;
> + int i, num;
> +
> + pm->lpm_env_setup(gpc);
> + pm->set_mode(gpc, GPC_STOP_POWER_OFF);
> +
> + /* enable core0 power down/up with low power mode */
> + pm->lpm_cpu_power_gate(gpc, 0, true);
> +
> + /* enable plat power down with low power mode */
> + pm->lpm_plat_power_gate(gpc, true);
> +
> + /*
> + * To avoid confuse, we use slot 0~4 for power down,
> + * slot 5~9 for power up.
> + *
> + * Power down slot sequence:
> + * Slot0 -> CORE0
> + * Slot1 -> Mega/Fast MIX
> + * Slot2 -> SCU
> + *
> + * Power up slot sequence:
> + * Slot5 -> Mega/Fast MIX
> + * Slot6 -> SCU
> + * Slot7 -> CORE0
> + */
> + pm->set_slot(gpc, 0, CORE0_A7, false);
> + pm->set_slot(gpc, 2, SCU_A7, false);
> +
> + if (gpc->get_wakeup_source) {
> + pm->set_slot(gpc, 1, FAST_MEGA_MIX, false);
> + pm->set_slot(gpc, 5, FAST_MEGA_MIX, true);
> + pm->lpm_enable_core(gpc, true, GPC_PGC_FM);
> + num = gpc->get_wakeup_source(&sources);
> + for (i = 0; i < num; i++) {
> + if ((~sources[i] & gpc->mfmix_mask[i]) == 0)
> + continue;
> + pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
> + break;
> + }
> + }
> +
> + pm->set_slot(gpc, 6, SCU_A7, true);
> + pm->set_slot(gpc, 7, CORE0_A7, true);
> +
> + /* Set Power down act */
> + pm->set_act(gpc, SCU_A7, false);
> +
> + /* Set Power up act */
> + pm->set_act(gpc, CORE0_A7, true);
> +
> + /* enable core0, scu */
> + pm->lpm_enable_core(gpc, true, GPC_PGC_C0);
> + pm->lpm_enable_core(gpc, true, GPC_PGC_SCU);
> +
> + cpu_suspend((unsigned long)pm, gpcv2_suspend_finish);
> +
> + pm->lpm_env_clean(gpc);
> + pm->set_mode(gpc, GPC_WAIT_CLOCKED);
> + pm->lpm_cpu_power_gate(gpc, 0, false);
> + pm->lpm_plat_power_gate(gpc, false);
> +
> + pm->lpm_enable_core(gpc, false, GPC_PGC_C0);
> + pm->lpm_enable_core(gpc, false, GPC_PGC_SCU);
> + pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
> + pm->clear_slots(gpc);
> +}
> +
> +static int imx_gpcv2_pm_enter(suspend_state_t state) {
> + struct imx_gpcv2_suspend *pm;
> +
> + BUG_ON(!gpcv2_instance);
> + pm = gpcv2_instance->pm;
> +
> + switch (state) {
> + case PM_SUSPEND_STANDBY:
> + pm->standby(gpcv2_instance);
> + break;
> +
> + case PM_SUSPEND_MEM:
> + pm->suspend(gpcv2_instance);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int imx_gpcv2_pm_valid(suspend_state_t state) {
> + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; }
> +
> +static int __init imx_get_base_from_node(struct device_node *node,
> + struct imx7_pm_base *base)
> +{
> + struct resource res;
> + int ret = 0;
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = ioremap(res.start, resource_size(&res));
> + if (!base->vbase) {
> + iounmap(base->vbase);
> + ret = -ENOMEM;
> + }
> +put_node:
> + of_node_put(node);
> +
> + return ret;
> +}
> +
> +static int __init imx_get_base_from_dt(struct imx7_pm_base *base,
> + const char *compat)
> +{
> + struct device_node *node;
> + struct resource res;
> + int ret = 0;
> +
> + node = of_find_compatible_node(NULL, NULL, compat);
> + if (!node) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = ioremap(res.start, resource_size(&res));
> + if (!base->vbase)
> + ret = -ENOMEM;
> +
> +put_node:
> + of_node_put(node);
> +out:
> + return ret;
> +}
> +
> +static int __init imx_get_exec_base_from_dt(struct imx7_pm_base *base,
> + const char *compat)
> +{
> + struct device_node *node;
> + struct resource res;
> + int ret = 0;
> +
> + node = of_find_compatible_node(NULL, NULL, compat);
> + if (!node) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = __arm_ioremap_exec(res.start, resource_size(&res),
> +false);
> +
> + if (!base->vbase)
> + ret = -ENOMEM;
> +
> +put_node:
> + of_node_put(node);
> +out:
> + return ret;
> +}
> +
> +static int __init imx_gpcv2_suspend_init(struct imx_gpcv2_suspend *pm,
> + const struct imx7_pm_socdata *socdata) {
> + struct imx7_pm_base aips_base[3] = { {0, 0}, {0, 0}, {0, 0} };
> + struct imx7_pm_base sram_base = {0, 0};
> + struct imx7_cpu_pm_info *pm_info;
> + struct device_node *node = NULL;
> + int i, ret = 0;
> +
> + const u32 (*ddrc_phy_offset_array)[2];
> + const u32 (*ddrc_offset_array)[2];
> +
> + if (!socdata || !pm) {
> + pr_warn("%s: invalid argument!\n", __func__);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < 3; i++) {
> + node = of_find_compatible_node(node, NULL, "fsl,aips-bus");
> + if (!node) {
> + pr_warn("%s: failed to find aips %d node!\n",
> + __func__, i);
> + break;
> + }
> + ret = imx_get_base_from_node(node, &aips_base[i]);
> + if (ret) {
> + pr_warn("%s: failed to get aips[%d] base %d!\n",
> + __func__, i, ret);
> + }
> + }
> +
> + ret = imx_get_exec_base_from_dt(&sram_base, "fsl,lpm-sram");
> + if (ret) {
> + pr_warn("%s: failed to get lpm-sram base %d!\n",
> + __func__, ret);
> + goto lpm_sram_map_failed;
> + }
> +
> + pm_info = sram_base.vbase;
> + pm_info->pbase = sram_base.pbase;
> + pm_info->resume_addr = virt_to_phys(ca7_cpu_resume);
> + pm_info->pm_info_size = sizeof(*pm_info);
> +
> + ret = imx_get_base_from_dt(&pm_info->ccm_base,
> socdata->ccm_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
> + goto ccm_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->ddrc_base,
> socdata->ddrc_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ddrc base %d!\n", __func__, ret);
> + goto ddrc_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->ddrc_phy_base,
> + socdata->ddrc_phy_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ddrc_phy base %d!\n", __func__, ret);
> + goto ddrc_phy_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->src_base, socdata->src_compat);
> + if (ret) {
> + pr_warn("%s: failed to get src base %d!\n", __func__, ret);
> + goto src_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->iomuxc_gpr_base,
> + socdata->iomuxc_gpr_compat);
> + if (ret) {
> + pr_warn("%s: failed to get iomuxc_gpr base %d!\n",
> + __func__, ret);
> + goto iomuxc_gpr_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->gpc_base, socdata->gpc_compat);
> + if (ret) {
> + pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
> + goto gpc_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->anatop_base,
> + socdata->anatop_compat);
> + if (ret) {
> + pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
> + goto anatop_map_failed;
> + }
> +
> + pm_info->ddrc_num = socdata->ddrc_num;
> + ddrc_offset_array = socdata->ddrc_offset;
> + pm_info->ddrc_phy_num = socdata->ddrc_phy_num;
> + ddrc_phy_offset_array = socdata->ddrc_phy_offset;
> +
> + /* initialize DDRC settings */
> + for (i = 0; i < pm_info->ddrc_num; i++) {
> + pm_info->ddrc_val[i][0] = ddrc_offset_array[i][0];
> + if (ddrc_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
> + pm_info->ddrc_val[i][1] =
> + readl_relaxed(pm_info->ddrc_base.vbase +
> + ddrc_offset_array[i][0]);
> + else
> + pm_info->ddrc_val[i][1] = ddrc_offset_array[i][1];
> + }
> +
> + /* initialize DDRC PHY settings */
> + for (i = 0; i < pm_info->ddrc_phy_num; i++) {
> + pm_info->ddrc_phy_val[i][0] =
> + ddrc_phy_offset_array[i][0];
> + if (ddrc_phy_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
> + pm_info->ddrc_phy_val[i][1] =
> + readl_relaxed(pm_info->ddrc_phy_base.vbase +
> + ddrc_phy_offset_array[i][0]);
> + else
> + pm_info->ddrc_phy_val[i][1] =
> + ddrc_phy_offset_array[i][1];
> + }
> +
> + pm->suspend_fn_in_ocram = fncpy(
> + sram_base.vbase + sizeof(*pm_info),
> + &imx7_suspend,
> + MX7_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
> + pm->ocram_vbase = sram_base.vbase;
> +
> + goto put_node;
> +
> +anatop_map_failed:
> + iounmap(pm_info->anatop_base.vbase);
> +gpc_map_failed:
> + iounmap(pm_info->gpc_base.vbase);
> +iomuxc_gpr_map_failed:
> + iounmap(pm_info->iomuxc_gpr_base.vbase);
> +src_map_failed:
> + iounmap(pm_info->src_base.vbase);
> +ddrc_phy_map_failed:
> + iounmap(pm_info->ddrc_phy_base.vbase);
> +ddrc_map_failed:
> + iounmap(pm_info->ddrc_base.vbase);
> +ccm_map_failed:
> + iounmap(pm_info->ccm_base.vbase);
> +lpm_sram_map_failed:
> + iounmap(sram_base.vbase);
> +put_node:
> + of_node_put(node);
> +
> + return ret;
> +}
> +
> +static const struct platform_suspend_ops imx_gpcv2_pm_ops = {
> + .enter = imx_gpcv2_pm_enter,
> + .valid = imx_gpcv2_pm_valid,
> +};
> +
> +static int __init imx_gpcv2_pm_init(void) {
> + struct imx_gpcv2_suspend *pm;
> + struct imx_gpcv2 *gpc;
> + int val, num;
> +
> + pm = kzalloc(sizeof(struct imx_gpcv2_suspend), GFP_KERNEL);
> + if (!pm) {
> + pr_warn("[GPCv2] %s init failed\r\n", __func__);
> + return -ENOMEM;
> + }
> +
> + gpc = kzalloc(sizeof(struct imx_gpcv2), GFP_KERNEL);
> + if (!gpc) {
> + pr_warn("[GPCv2] %s init failed\r\n", __func__);
> + kfree(pm);
> + return -ENOMEM;
> + }
> +
> + imx_gpcv2_suspend_init(pm, &imx7d_pm_data_ddr3);
> +
> + pm->lpm_env_setup = imx_gpcv2_lpm_env_setup;
> + pm->lpm_env_clean = imx_gpcv2_lpm_env_clean;
> +
> + pm->lpm_cpu_power_gate = imx_gpcv2_lpm_cpu_power_gate;
> + pm->lpm_plat_power_gate = imx_lpm_plat_power_gate;
> + pm->lpm_enable_core = imx_gpcv2_lpm_enable_core;
> + pm->set_mode = imx_gpcv2_lpm_set_mode;
> +
> + pm->clear_slots = imx_gpcv2_lpm_clear_slots;
> + pm->set_slot = imx_gpcv2_lpm_slot_setup;
> + pm->set_act = imx_gpcv2_lpm_set_ack;
> +
> + pm->standby = imx_gpcv2_lpm_standby;
> + pm->suspend = imx_gpcv2_lpm_suspend;
> +
> + gpc->anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
> + if (IS_ERR(gpc->anatop))
> + goto error_exit;
> +
> + gpc->gpcv2 = syscon_regmap_lookup_by_compatible("fsl,imx7d-gpc");
> + if (IS_ERR(gpc->gpcv2))
> + goto error_exit;
> +
> + /* only external IRQs to wake up LPM and core 0/1 */
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &val);
> + val |= BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP;
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, val);
> + /* mask m4 dsm trigger */
> + regmap_read(gpc->gpcv2, GPC_LPCR_M4, &val);
> + val |= BM_LPCR_M4_MASK_DSM_TRIGGER;
> + regmap_write(gpc->gpcv2, GPC_LPCR_M4, val);
> +
> + /* set mega/fast mix in A7 domain */
> + regmap_write(gpc->gpcv2, GPC_PGC_CPU_MAPPING, 0x1);
> + /* set SCU timing */
> + val = (0x59 << 10) | 0x5B | (0x51 << 20);
> + regmap_write(gpc->gpcv2, GPC_PGC_SCU_TIMING, val);
> +
> + gpc->pm = pm;
> + gpc->get_wakeup_source = imx_gpcv2_get_wakeup_source;
> + gpcv2_instance = gpc;
> +
> + num = imx_gpcv2_get_wakeup_source(0);
> +
> + /*
> + * The IP blocks which may be the wakeup sources are allocated into
> + * several power domains. MFMIX, LPSRMX, and WAKEUPMIX are three of
> + * those power domains. If a bit is '1' in the mask, it means the IP
> + * block is inside the power domain. The mask will be used to decide
> + * if a power domain should be shutdown or not when system goes into
> + * suspend states.
> + */
> +
> + if (num)
> + gpc->wakeupmix_mask = kzalloc(sizeof(u32)*num*3, GFP_KERNEL);
> +
> + if (!gpc->wakeupmix_mask)
> + goto error_exit;
> +
> + /*
> + * Shutdown LPSRMIX and WAKEUP power domain has not been
> + * implemented in this patch yet.
> + */
> +
> + gpc->lpsrmix_mask = gpc->wakeupmix_mask + num;
> + gpc->mfmix_mask = gpc->wakeupmix_mask + num*2;
> +
> + /* Mask the wakeup sources in M/F power domain */
> + gpc->mfmix_mask[0] = 0x54010000;
> + gpc->mfmix_mask[1] = 0xC00;
> + gpc->mfmix_mask[2] = 0x0;
> + gpc->mfmix_mask[3] = 0x400010;
> +
> + suspend_set_ops(&imx_gpcv2_pm_ops);
> + return 0;
> +
> +error_exit:
> + kfree(pm);
> + kfree(gpc);
> + return -ENODEV;
> +}
> +
> +device_initcall(imx_gpcv2_pm_init);
> diff --git a/arch/arm/mach-imx/suspend-imx7.S
> b/arch/arm/mach-imx/suspend-imx7.S
> new file mode 100644
> index 0000000..8c3f516
> --- /dev/null
> +++ b/arch/arm/mach-imx/suspend-imx7.S
> @@ -0,0 +1,529 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/asm-offsets.h>
> +#include "hardware.h"
> +
> +/*
> + * ==================== low level suspend ====================
> + *
> + * Better to follow below rules to use ARM registers:
> + * r0: pm_info structure address;
> + * r1 ~ r4: for saving pm_info members;
> + * r5 ~ r10: free registers;
> + * r11: io base address.
> + *
> + * suspend ocram space layout:
> + * ======================== high address ======================
> + * .
> + * .
> + * .
> + * ^
> + * ^
> + * ^
> + * imx7_suspend code
> + * PM_INFO structure(imx7_cpu_pm_info)
> + * ======================== low address ======================= */
> +
> +/*
> + * Below offsets are based on struct imx7_cpu_pm_info
> + * which defined in arch/arm/mach-imx/pm-imx7.c, this
> + * structure contains necessary pm info for low level
> + * suspend related code.
> + */
> +#define PM_INFO_M4_RESERVE0_OFFSET 0x0
> +#define PM_INFO_M4_RESERVE1_OFFSET 0x4
> +#define PM_INFO_M4_RESERVE2_OFFSET 0x8
> +#define PM_INFO_PBASE_OFFSET 0xc
> +#define PM_INFO_RESUME_ADDR_OFFSET 0x10
> +#define PM_INFO_DDR_TYPE_OFFSET 0x14
> +#define PM_INFO_PM_INFO_SIZE_OFFSET 0x18
> +#define PM_INFO_MX7_DDRC_P_OFFSET 0x1c
> +#define PM_INFO_MX7_DDRC_V_OFFSET 0x20
> +#define PM_INFO_MX7_DDRC_PHY_P_OFFSET 0x24
> +#define PM_INFO_MX7_DDRC_PHY_V_OFFSET 0x28
> +#define PM_INFO_MX7_SRC_P_OFFSET 0x2c
> +#define PM_INFO_MX7_SRC_V_OFFSET 0x30
> +#define PM_INFO_MX7_IOMUXC_GPR_P_OFFSET 0x34
> +#define PM_INFO_MX7_IOMUXC_GPR_V_OFFSET 0x38
> +#define PM_INFO_MX7_CCM_P_OFFSET 0x3c
> +#define PM_INFO_MX7_CCM_V_OFFSET 0x40
> +#define PM_INFO_MX7_GPC_P_OFFSET 0x44
> +#define PM_INFO_MX7_GPC_V_OFFSET 0x48
> +#define PM_INFO_MX7_L2_P_OFFSET 0x4c
> +#define PM_INFO_MX7_L2_V_OFFSET 0x50
> +#define PM_INFO_MX7_ANATOP_P_OFFSET 0x54
> +#define PM_INFO_MX7_ANATOP_V_OFFSET 0x58
> +#define PM_INFO_MX7_TTBR1_V_OFFSET 0x5c
> +#define PM_INFO_DDRC_REG_NUM_OFFSET 0x60
> +#define PM_INFO_DDRC_REG_OFFSET 0x64
> +#define PM_INFO_DDRC_VALUE_OFFSET 0x68
> +#define PM_INFO_DDRC_PHY_REG_NUM_OFFSET 0x164
> +#define PM_INFO_DDRC_PHY_REG_OFFSET 0x168
> +#define PM_INFO_DDRC_PHY_VALUE_OFFSET 0x16c
> +
> +#define MX7_SRC_GPR1 0x74
> +#define MX7_SRC_GPR2 0x78
> +#define GPC_PGC_FM 0xa00
> +#define ANADIG_SNVS_MISC_CTRL 0x380
> +#define DDRC_STAT 0x4
> +#define DDRC_PWRCTL 0x30
> +#define DDRC_PSTAT 0x3fc
> +#define DDRC_PCTRL_0 0x490
> +#define DDRC_DFIMISC 0x1b0
> +#define DDRC_SWCTL 0x320
> +#define DDRC_SWSTAT 0x324
> +#define DDRPHY_LP_CON0 0x18
> +
> + .align 3
> +
> + .macro disable_l1_dcache
> +
> + /*
> + * Flush all data from the L1 data cache before disabling
> + * SCTLR.C bit.
> + */
> + push {r0 - r10, lr}
> + ldr r7, =v7_flush_dcache_all
> + mov lr, pc
> + mov pc, r7
> + pop {r0 - r10, lr}
> +
> + /* disable d-cache */
> + mrc p15, 0, r7, c1, c0, 0
> + bic r7, r7, #(1 << 2)
> + mcr p15, 0, r7, c1, c0, 0
> + dsb
> + isb
> +
> + push {r0 - r10, lr}
> + ldr r7, =v7_flush_dcache_all
> + mov lr, pc
> + mov pc, r7
> + pop {r0 - r10, lr}
> +
> + .endm
> +
> +
> + .macro enable_l1_dcache
> +
> + /* Enable L1 data cache. */
> + mrc p15, 0, r6, c1, c0, 0
> + orr r6, r6, #0x4
> + mcr p15, 0, r6, c1, c0, 0
> +
> + dsb
> + isb
> +
> + .endm
> +
> +
> + .macro ddrc_enter_self_refresh
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait rw port_busy clear */
> + ldr r6, =(0x1 << 16)
> + orr r6, r6, #0x1
> +1:
> + ldr r7, [r11, #DDRC_PSTAT]
> + ands r7, r7, r6
> + bne 1b
> +
> + /* enter self-refresh bit 5 */
> + ldr r7, =(0x1 << 5)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +2:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 2b
> +3:
> + ldr r7, [r11, #DDRC_STAT]
> + ands r7, r7, #0x20
> + beq 3b
> +
> + /* disable dram clk */
> + ldr r7, [r11, #DDRC_PWRCTL]
> + orr r7, r7, #(1 << 3)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + .endm
> +
> + .macro ddrc_exit_self_refresh
> +
> + cmp r5, #0x0
> + ldreq r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldrne r11, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +4:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + beq 4b
> +
> + /* enable auto self-refresh */
> + ldr r7, [r11, #DDRC_PWRCTL]
> + orr r7, r7, #(1 << 0)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + .endm
> +
> + .macro wait_delay
> +5:
> + subs r6, r6, #0x1
> + bne 5b
> +
> + .endm
> +
> + .macro ddr_enter_retention
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PCTRL_0]
> +
> + /* wait rw port_busy clear */
> + ldr r6, =(0x1 << 16)
> + orr r6, r6, #0x1
> +6:
> + ldr r7, [r11, #DDRC_PSTAT]
> + ands r7, r7, r6
> + bne 6b
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + /* enter self-refresh bit 5 */
> + ldr r7, =(0x1 << 5)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +7:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 7b
> +8:
> + ldr r7, [r11, #DDRC_STAT]
> + ands r7, r7, #0x20
> + beq 8b
> +
> + /* disable dram clk */
> + ldr r7, =(0x1 << 5)
> + orr r7, r7, #(1 << 3)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* reset ddr_phy */
> + ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, =0x0
> + str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* delay 7 us */
> + ldr r6, =6000
> + wait_delay
> +
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldr r6, =0x1000
> + ldr r7, [r11, r6]
> + orr r7, r7, #0x1
> + str r7, [r11, r6]
> + /* turn off ddr power */
> + ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, =(0x1 << 29)
> + str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
> +
> + .endm
> +
> + .macro ddr_exit_retention
> +
> + cmp r5, #0x0
> + ldreq r1, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldrne r1, [r0, #PM_INFO_MX7_ANATOP_P_OFFSET]
> + ldreq r2, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldrne r2, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
> + ldreq r3, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldrne r3, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
> + ldreq r4, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
> + ldrne r4, [r0, #PM_INFO_MX7_DDRC_PHY_P_OFFSET]
> + ldreq r10, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
> + ldrne r10, [r0, #PM_INFO_MX7_CCM_P_OFFSET]
> + ldreq r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldrne r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_P_OFFSET]
> +
> + /* turn on ddr power */
> + ldr r7, =(0x1 << 29)
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + ldr r6, =50
> + wait_delay
> +
> + ldr r7, =0x0
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* clear ddr_phy reset */
> + ldr r6, =0x1000
> + ldr r7, [r2, r6]
> + orr r7, r7, #0x3
> + str r7, [r2, r6]
> + ldr r7, [r2, r6]
> + bic r7, r7, #0x1
> + str r7, [r2, r6]
> +
> + ldr r6, [r0, #PM_INFO_DDRC_REG_NUM_OFFSET]
> + ldr r7, =PM_INFO_DDRC_REG_OFFSET
> + add r7, r7, r0
> +9:
> + ldr r8, [r7], #0x4
> + ldr r9, [r7], #0x4
> + str r9, [r3, r8]
> + subs r6, r6, #0x1
> + bne 9b
> + ldr r7, =0x20
> + str r7, [r3, #DDRC_PWRCTL]
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_DFIMISC]
> +
> + /* do PHY, clear ddr_phy reset */
> + ldr r6, =0x1000
> + ldr r7, [r2, r6]
> + bic r7, r7, #0x2
> + str r7, [r2, r6]
> +
> + ldr r7, =(0x1 << 30)
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* need to delay ~5mS */
> + ldr r6, =0x100000
> + wait_delay
> +
> + ldr r6, [r0, #PM_INFO_DDRC_PHY_REG_NUM_OFFSET]
> + ldr r7, =PM_INFO_DDRC_PHY_REG_OFFSET
> + add r7, r7, r0
> +
> +10:
> + ldr r8, [r7], #0x4
> + ldr r9, [r7], #0x4
> + str r9, [r4, r8]
> + subs r6, r6, #0x1
> + bne 10b
> +
> + ldr r7, =0x0
> + add r9, r10, #0x4000
> + str r7, [r9, #0x130]
> +
> + cmp r5, #0x0
> + beq 101f
> + ldr r7, =0x170
> + orr r7, r7, #0x8
> + str r7, [r11, #0x20]
> +
> +101:
> + ldr r7, =0x2
> + add r9, r10, #0x4000
> + str r7, [r9, #0x130]
> +
> + ldr r7, =0xf
> + str r7, [r4, #DDRPHY_LP_CON0]
> +
> + /* wait until self-refresh mode entered */
> +11:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 11b
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_SWCTL]
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_DFIMISC]
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_SWCTL]
> +12:
> + ldr r7, [r3, #DDRC_SWSTAT]
> + and r7, r7, #0x1
> + cmp r7, #0x1
> + bne 12b
> +13:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x20
> + cmp r7, #0x20
> + bne 13b
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_PWRCTL]
> +14:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x30
> + cmp r7, #0x0
> + bne 14b
> +
> +15:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x1
> + bne 15b
> +
> + /* enable port */
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_PCTRL_0]
> +
> + .endm
> +
> +ENTRY(imx7_suspend)
> + push {r4-r12}
> +
> + /*
> + * The value of r0 is mapped the same in origin table and IRAM table,
> + * thus no need to care r0 here.
> + */
> + ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
> + ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
> + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
> + ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
> +
> + /*
> + * counting the resume address in iram
> + * to set it in SRC register.
> + */
> + ldr r6, =imx7_suspend
> + ldr r7, =resume
> + sub r7, r7, r6
> + add r8, r1, r4
> + add r9, r8, r7
> +
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + /* store physical resume addr and pm_info address. */
> + str r9, [r11, #MX7_SRC_GPR1]
> + str r1, [r11, #MX7_SRC_GPR2]
> +
> + disable_l1_dcache
> +
> + /*
> + * make sure TLB contain the addr we want,
> + * as we will access them after DDR is in
> + * self-refresh mode.
> + */
> + ldr r6, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldr r7, [r0, #0x0]
> + ldr r6, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
> + add r6, #0x4000
> + ldr r7, [r6]
> + ldr r6, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + ldr r6, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + add r6, #0x1000
> + ldr r7, [r6]
> + ldr r6, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + ldr r7, [r6, #0x490]
> + ldr r6, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
> + ldr r7, [r6, #0x0]
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq ddr_only_self_refresh
> +
> + ddr_enter_retention
> + b ddr_retention_enter_out
> +ddr_only_self_refresh:
> + ddrc_enter_self_refresh
> +ddr_retention_enter_out:
> +
> + /* Zzz, enter stop mode */
> + wfi
> + nop
> + nop
> + nop
> + nop
> +
> + mov r5, #0x0
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq wfi_ddr_self_refresh_out
> +
> + ddr_exit_retention
> + b wfi_ddr_retention_out
> +wfi_ddr_self_refresh_out:
> + ddrc_exit_self_refresh
> +wfi_ddr_retention_out:
> +
> + ldr r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldr r7, =0x170
> + orr r7, r7, #0x8
> + str r7, [r11, #0x20]
> +
> + /* clear core0's entry and parameter */
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + mov r7, #0x0
> + str r7, [r11, #MX7_SRC_GPR1]
> + str r7, [r11, #MX7_SRC_GPR2]
> +
> + enable_l1_dcache
> +
> + pop {r4-r12}
> + /* return to suspend finish */
> + mov pc, lr
> +
> +resume:
> + /* invalidate L1 I-cache first */
> + mov r6, #0x0
> + mcr p15, 0, r6, c7, c5, 0
> + mcr p15, 0, r6, c7, c5, 6
> + /* enable the Icache and branch prediction */
> + mov r6, #0x1800
> + mcr p15, 0, r6, c1, c0, 0
> + isb
> +
> + /* get physical resume address from pm_info. */
> + ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
> + /* clear core0's entry and parameter */
> + ldr r11, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
> + mov r7, #0x0
> + str r7, [r11, #MX7_SRC_GPR1]
> + str r7, [r11, #MX7_SRC_GPR2]
> +
> + mov r5, #0x1
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_P_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq dsm_ddr_self_refresh_out
> +
> + ddr_exit_retention
> + b dsm_ddr_retention_out
> +dsm_ddr_self_refresh_out:
> + ddrc_exit_self_refresh
> +dsm_ddr_retention_out:
> +
> + mov pc, lr
> +ENDPROC(imx7_suspend)
> +
> +ENTRY(ca7_cpu_resume)
> + bl v7_invalidate_l1
> + b cpu_resume
> +ENDPROC(ca7_cpu_resume)
> --
> 2.5.0.rc2
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-09-03 20:41 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-09-03 20:41 UTC (permalink / raw)
To: linux-arm-kernel
2nd ping.
Shenwei
> -----Original Message-----
> From: linux-kernel-owner at vger.kernel.org
> [mailto:linux-kernel-owner at vger.kernel.org] On Behalf Of Shenwei Wang
> Sent: 2015?7?31? 16:34
> To: shawn.guo at linaro.org; tglx at linutronix.de; jason at lakedaemon.net
> Cc: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Huang
> Yongcai-B20788
> Subject: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
>
> IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions:
> power management and wakeup source management.
>
> GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4 domains.
> And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
> After configuring the GPCv2 module, the platform can enter into a selected mode
> either automatically triggered by ARM WFI instruction or manually by software.
> The system will exit the low power states by the predefined wakeup sources
> which are managed by the gpcv2 irqchip driver.
>
> This patch adds a new suspend driver to manage the power states on IMX7D.
> It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
> ---
> arch/arm/mach-imx/Kconfig | 1 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/common.h | 4 +
> arch/arm/mach-imx/pm-imx7.c | 917
> +++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> 5 files changed, 1453 insertions(+)
> create mode 100644 arch/arm/mach-imx/pm-imx7.c create mode 100644
> arch/arm/mach-imx/suspend-imx7.S
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index
> 8ceda28..54f8553 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -562,6 +562,7 @@ config SOC_IMX7D
> select ARM_GIC
> select HAVE_IMX_ANATOP
> select HAVE_IMX_MMDC
> + select IMX_GPCV2
> help
> This enables support for Freescale i.MX7 Dual processor.
>
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index
> fb689d8..60f13fd 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -88,6 +88,8 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
>
> ifeq ($(CONFIG_SUSPEND),y)
> AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
> +AFLAGS_suspend-imx7.o :=-Wa,-march=armv7-a
> +obj-$(CONFIG_SOC_IMX7D) += suspend-imx7.o pm-imx7.o
> obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
> obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif diff --git
> a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index
> 21e4e86..c5767f4 100644
> --- a/arch/arm/mach-imx/common.h
> +++ b/arch/arm/mach-imx/common.h
> @@ -126,6 +126,10 @@ static const u32 imx53_suspend_sz; static inline void
> imx6_suspend(void __iomem *ocram_vbase) {} #endif
>
> +void ca7_cpu_resume(void);
> +void imx7_suspend(void __iomem *ocram_vbase);
> +u32 imx_gpcv2_get_wakeup_source(u32 **sources);
> +
> void imx6_pm_ccm_init(const char *ccm_compat); void imx6q_pm_init(void);
> void imx6dl_pm_init(void); diff --git a/arch/arm/mach-imx/pm-imx7.c
> b/arch/arm/mach-imx/pm-imx7.c new file mode 100644 index 0000000..052c2cb
> --- /dev/null
> +++ b/arch/arm/mach-imx/pm-imx7.c
> @@ -0,0 +1,917 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +#include <linux/suspend.h>
> +#include <linux/slab.h>
> +#include <asm/suspend.h>
> +#include <asm/fncpy.h>
> +
> +#include "common.h"
> +
> +#define GPC_LPCR_A7_BSC 0x0
> +#define GPC_LPCR_A7_AD 0x4
> +#define GPC_LPCR_M4 0x8
> +
> +#define GPC_SLPCR 0x14
> +#define GPC_PGC_ACK_SEL_A7 0x24
> +
> +#define GPC_SLOTx_CFG(x) (0xb0 + 4 * (x))
> +
> +#define GPC_PGC_CPU_MAPPING 0xec
> +
> +#define GPC_PGC_C0 0x800
> +#define GPC_PGC_C1 0x840
> +#define GPC_PGC_SCU 0x880
> +#define GPC_PGC_SCU_TIMING 0x890
> +#define GPC_PGC_FM 0xa00
> +#define GPC_PGC_MIPI_PHY 0xc00
> +#define GPC_PGC_PCIE_PHY 0xc40
> +#define GPC_PGC_USB_OTG1_PHY 0xc80
> +#define GPC_PGC_USB_OTG2_PHY 0xcc0
> +#define GPC_PGC_USB_HSIC_PHY 0xd00
> +
> +#define ANADIG_ARM_PLL 0x60
> +#define ANADIG_DDR_PLL 0x70
> +#define ANADIG_SYS_PLL 0xb0
> +#define ANADIG_ENET_PLL 0xe0
> +#define ANADIG_AUDIO_PLL 0xf0
> +#define ANADIG_VIDEO_PLL 0x130
> +
> +#define BM_LPCR_A7_AD_L2PGE (0x1 << 16)
> +#define BM_LPCR_A7_AD_EN_C1_PUP (0x1 << 11)
> +#define BM_LPCR_A7_AD_EN_C1_IRQ_PUP (0x1 << 10)
> +#define BM_LPCR_A7_AD_EN_C0_PUP (0x1 << 9)
> +#define BM_LPCR_A7_AD_EN_C0_IRQ_PUP (0x1 << 8)
> +#define BM_LPCR_A7_AD_EN_PLAT_PDN (0x1 << 4)
> +#define BM_LPCR_A7_AD_EN_C1_PDN (0x1 << 3)
> +#define BM_LPCR_A7_AD_EN_C1_WFI_PDN (0x1 << 2)
> +#define BM_LPCR_A7_AD_EN_C0_PDN (0x1 << 1)
> +#define BM_LPCR_A7_AD_EN_C0_WFI_PDN (0x1)
> +
> +#define BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP (0x7 << 28)
> +#define BM_LPCR_A7_BSC_CPU_CLK_ON_LPM (0x1 << 14)
> +#define BM_LPCR_A7_BSC_LPM1 (0x3 << 2)
> +#define BM_LPCR_A7_BSC_LPM0 (0x3)
> +
> +#define BM_LPCR_M4_MASK_DSM_TRIGGER (0x1 << 31)
> +
> +#define BM_SLPCR_EN_DSM (0x1 << 31)
> +#define BM_SLPCR_RBC_EN (0x1 << 30)
> +#define BM_SLPCR_VSTBY (0x1 << 2)
> +#define BM_SLPCR_SBYOS (0x1 << 1)
> +#define BM_SLPCR_BYPASS_PMIC_READY (0x1)
> +
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP (0x1 << 31)
> +#define BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN (0x1 << 15)
> +
> +#define BM_ANADIG_ARM_PLL_OVERRIDE (0x1 << 20)
> +#define BM_ANADIG_DDR_PLL_OVERRIDE (0x1 << 19)
> +#define BM_ANADIG_SYS_PLL_PFDx_OVERRIDE (0x1FF << 17)
> +#define BM_ANADIG_ENET_PLL_OVERRIDE (0x1 << 13)
> +#define BM_ANADIG_AUDIO_PLL_OVERRIDE (0x1 << 24)
> +#define BM_ANADIG_VIDEO_PLL_OVERRIDE (0x1 << 24)
> +
> +#define A7_LPM_WAIT 0x5
> +#define A7_LPM_STOP 0xa
> +#define GPC_MAX_SLOT_NUMBER 10
> +
> +#define REG_SET 0x4
> +#define REG_CLR 0x8
> +
> +#define MX7_MAX_DDRC_NUM 32
> +#define MX7_MAX_DDRC_PHY_NUM 16
> +
> +#define READ_DATA_FROM_HARDWARE 0
> +#define MX7_SUSPEND_OCRAM_SIZE 0x1000
> +
> +enum gpcv2_mode {
> + GPC_WAIT_CLOCKED,
> + GPC_WAIT_UNCLOCKED,
> + GPC_STOP_POWER_ON,
> + GPC_STOP_POWER_OFF,
> +};
> +
> +/*
> + * GPCv2 has the following power domains, and each domain can be
> +power-up
> + * and power-down via GPC settings.
> + *
> + * Core 0 of A7 power domain
> + * Core1 of A7 power domain
> + * SCU/L2 cache RAM of A7 power domain
> + * Fastmix and megamix power domain
> + * USB OTG1 PHY power domain
> + * USB OTG2 PHY power domain
> + * PCIE PHY power domain
> + * USB HSIC PHY power domain
> + * Core 0 of M4 power domain
> + */
> +
> +enum gpcv2_slot {
> + CORE0_A7,
> + CORE1_A7,
> + SCU_A7,
> + FAST_MEGA_MIX,
> + MIPI_PHY,
> + PCIE_PHY,
> + USB_OTG1_PHY,
> + USB_OTG2_PHY,
> + USB_HSIC_PHY,
> + CORE0_M4,
> +};
> +
> +struct imx_gpcv2;
> +
> +struct imx_gpcv2_suspend {
> + void (*set_mode)(struct imx_gpcv2 *, enum gpcv2_mode mode);
> + void (*lpm_cpu_power_gate)(struct imx_gpcv2 *, u32, bool);
> + void (*lpm_plat_power_gate)(struct imx_gpcv2 *, bool);
> + void (*lpm_env_setup)(struct imx_gpcv2 *);
> + void (*lpm_env_clean)(struct imx_gpcv2 *);
> +
> + void (*set_slot)(struct imx_gpcv2 *cd, u32 index,
> + enum gpcv2_slot slot, bool mode);
> + void (*set_act)(struct imx_gpcv2 *cd,
> + enum gpcv2_slot slot, bool mode);
> + void (*clear_slots)(struct imx_gpcv2 *);
> + void (*lpm_enable_core)(struct imx_gpcv2 *,
> + bool enable, u32 offset);
> +
> + void (*standby)(struct imx_gpcv2 *);
> + void (*suspend)(struct imx_gpcv2 *);
> +
> + void (*suspend_fn_in_ocram)(void __iomem *ocram_vbase);
> + void __iomem *ocram_vbase;
> +};
> +
> +struct imx_gpcv2 {
> + u32 *wakeupmix_mask;
> + u32 *lpsrmix_mask;
> + u32 *mfmix_mask;
> + spinlock_t lock;
> +
> + struct imx_gpcv2_suspend *pm;
> + struct regmap *anatop;
> + struct regmap *gpcv2;
> +
> + u32 (*get_wakeup_source)(u32 **);
> +};
> +
> +struct imx7_pm_base {
> + phys_addr_t pbase;
> + void __iomem *vbase;
> +};
> +
> +struct imx7_pm_socdata {
> + u32 ddr_type;
> + const char *ddrc_compat;
> + const char *ddrc_phy_compat;
> + const char *src_compat;
> + const char *iomuxc_gpr_compat;
> + const char *ccm_compat;
> + const char *gpc_compat;
> + const char *anatop_compat;
> + const u32 ddrc_num;
> + const u32 (*ddrc_offset)[2];
> + const u32 ddrc_phy_num;
> + const u32 (*ddrc_phy_offset)[2];
> +};
> +
> +/*
> + * This structure is for passing necessary data for low level ocram
> + * suspend code(arch/arm/mach-imx/suspend-imx7.S), if this struct
> + * definition is changed, the offset definition in
> + * arch/arm/mach-imx/suspend-imx7.S must be also changed accordingly,
> + * otherwise, the suspend to ocram function will be broken!
> + */
> +
> +struct imx7_cpu_pm_info {
> + u32 m4_reserve0;
> + u32 m4_reserve1;
> + u32 m4_reserve2;
> +
> + /* The physical address of pm_info. */
> + phys_addr_t pbase;
> +
> + /* The physical resume address for asm code */
> + phys_addr_t resume_addr;
> + u32 ddr_type;
> +
> + u32 pm_info_size;
> +
> + struct imx7_pm_base ddrc_base;
> + struct imx7_pm_base ddrc_phy_base;
> + struct imx7_pm_base src_base;
> + struct imx7_pm_base iomuxc_gpr_base;
> + struct imx7_pm_base ccm_base;
> + struct imx7_pm_base gpc_base;
> + struct imx7_pm_base l2_base;
> + struct imx7_pm_base anatop_base;
> +
> + u32 ttbr1;
> +
> + /* Number of DDRC which need saved/restored. */
> + u32 ddrc_num;
> +
> + /* To save offset and value */
> + u32 ddrc_val[MX7_MAX_DDRC_NUM][2];
> +
> + /* Number of DDRC which need saved/restored. */
> + u32 ddrc_phy_num;
> +
> + /* To save offset and value */
> + u32 ddrc_phy_val[MX7_MAX_DDRC_NUM][2];
> +} __aligned(8);
> +
> +static const u32 imx7d_ddrc_ddr3_setting[][2] __initconst = {
> + { 0x0, READ_DATA_FROM_HARDWARE },
> + { 0x1a0, READ_DATA_FROM_HARDWARE },
> + { 0x1a4, READ_DATA_FROM_HARDWARE },
> + { 0x1a8, READ_DATA_FROM_HARDWARE },
> + { 0x64, READ_DATA_FROM_HARDWARE },
> + { 0x490, 0x00000001 },
> + { 0xd0, 0xc0020001 },
> + { 0xd4, READ_DATA_FROM_HARDWARE },
> + { 0xdc, READ_DATA_FROM_HARDWARE },
> + { 0xe0, READ_DATA_FROM_HARDWARE },
> + { 0xe4, READ_DATA_FROM_HARDWARE },
> + { 0xf4, READ_DATA_FROM_HARDWARE },
> + { 0x100, READ_DATA_FROM_HARDWARE },
> + { 0x104, READ_DATA_FROM_HARDWARE },
> + { 0x108, READ_DATA_FROM_HARDWARE },
> + { 0x10c, READ_DATA_FROM_HARDWARE },
> + { 0x110, READ_DATA_FROM_HARDWARE },
> + { 0x114, READ_DATA_FROM_HARDWARE },
> + { 0x120, 0x03030803 },
> + { 0x180, READ_DATA_FROM_HARDWARE },
> + { 0x190, READ_DATA_FROM_HARDWARE },
> + { 0x194, READ_DATA_FROM_HARDWARE },
> + { 0x200, READ_DATA_FROM_HARDWARE },
> + { 0x204, READ_DATA_FROM_HARDWARE },
> + { 0x214, READ_DATA_FROM_HARDWARE },
> + { 0x218, READ_DATA_FROM_HARDWARE },
> + { 0x240, 0x06000601 },
> + { 0x244, READ_DATA_FROM_HARDWARE },
> +};
> +
> +static const u32 imx7d_ddrc_phy_ddr3_setting[][2] __initconst = {
> + { 0x0, READ_DATA_FROM_HARDWARE },
> + { 0x4, READ_DATA_FROM_HARDWARE },
> + { 0x10, READ_DATA_FROM_HARDWARE },
> + { 0x9c, READ_DATA_FROM_HARDWARE },
> + { 0x20, READ_DATA_FROM_HARDWARE },
> + { 0x30, READ_DATA_FROM_HARDWARE },
> + { 0x50, 0x01000010 },
> + { 0x50, 0x00000010 },
> + { 0xc0, 0x0e407304 },
> + { 0xc0, 0x0e447304 },
> + { 0xc0, 0x0e447306 },
> + { 0xc0, 0x0e447304 },
> + { 0xc0, 0x0e407306 },
> +};
> +
> +static const struct imx7_pm_socdata imx7d_pm_data_ddr3 __initconst = {
> + .iomuxc_gpr_compat = "fsl,imx7d-iomuxc",
> + .ddrc_phy_compat = "fsl,imx7d-ddrc-phy",
> + .anatop_compat = "fsl,imx7d-anatop",
> + .ddrc_compat = "fsl,imx7d-ddrc",
> + .ccm_compat = "fsl,imx7d-ccm",
> + .src_compat = "fsl,imx7d-src",
> + .gpc_compat = "fsl,imx7d-gpc",
> + .ddrc_phy_num = ARRAY_SIZE(imx7d_ddrc_phy_ddr3_setting),
> + .ddrc_phy_offset = imx7d_ddrc_phy_ddr3_setting,
> + .ddrc_num = ARRAY_SIZE(imx7d_ddrc_ddr3_setting),
> + .ddrc_offset = imx7d_ddrc_ddr3_setting, };
> +
> +static struct imx_gpcv2 *gpcv2_instance;
> +
> +static void imx_gpcv2_lpm_clear_slots(struct imx_gpcv2 *gpc) {
> + int i;
> +
> + for (i = 0; i < GPC_MAX_SLOT_NUMBER; i++)
> + regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(i), 0x0);
> +
> + regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7,
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP |
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
> +}
> +
> +static void imx_gpcv2_lpm_enable_core(struct imx_gpcv2 *gpc,
> + bool enable, u32 offset)
> +{
> + regmap_write(gpc->gpcv2, offset, enable); }
> +
> +static void imx_gpcv2_lpm_slot_setup(struct imx_gpcv2 *gpc,
> + u32 index, enum gpcv2_slot slot, bool powerup) {
> + u32 val;
> +
> + if (index >= GPC_MAX_SLOT_NUMBER) {
> + pr_err("Invalid slot index!\n");
> + return;
> + }
> +
> + val = (powerup ? 0x2 : 0x1) << (slot * 2);
> + regmap_write(gpc->gpcv2, GPC_SLOTx_CFG(index), val); }
> +
> +static void imx_gpcv2_lpm_set_ack(struct imx_gpcv2 *gpc,
> + enum gpcv2_slot slot, bool powerup)
> +{
> + u32 val;
> +
> + regmap_read(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, &val);
> +
> + /* clear dummy ack */
> + val &= ~(powerup ? BM_GPC_PGC_ACK_SEL_A7_DUMMY_PUP :
> + BM_GPC_PGC_ACK_SEL_A7_DUMMY_PDN);
> +
> + val |= 1 << (slot + (powerup ? 16 : 0));
> + regmap_write(gpc->gpcv2, GPC_PGC_ACK_SEL_A7, val); }
> +
> +static void imx_gpcv2_lpm_env_setup(struct imx_gpcv2 *gpc) {
> + /* PLL and PFDs overwrite set */
> + regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_SET,
> + BM_ANADIG_ARM_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_SET,
> + BM_ANADIG_DDR_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_SET,
> + BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_SET,
> + BM_ANADIG_ENET_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_SET,
> + BM_ANADIG_AUDIO_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_SET,
> + BM_ANADIG_VIDEO_PLL_OVERRIDE);
> +}
> +
> +static void imx_gpcv2_lpm_env_clean(struct imx_gpcv2 *gpc) {
> + /* PLL and PFDs overwrite clear */
> + regmap_write(gpc->anatop, ANADIG_ARM_PLL + REG_CLR,
> + BM_ANADIG_ARM_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_DDR_PLL + REG_CLR,
> + BM_ANADIG_DDR_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_SYS_PLL + REG_CLR,
> + BM_ANADIG_SYS_PLL_PFDx_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_ENET_PLL + REG_CLR,
> + BM_ANADIG_ENET_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_AUDIO_PLL + REG_CLR,
> + BM_ANADIG_AUDIO_PLL_OVERRIDE);
> + regmap_write(gpc->anatop, ANADIG_VIDEO_PLL + REG_CLR,
> + BM_ANADIG_VIDEO_PLL_OVERRIDE);
> +}
> +
> +static void imx_gpcv2_lpm_set_mode(struct imx_gpcv2 *gpc,
> + enum gpcv2_mode mode)
> +{
> + u32 lpcr, slpcr;
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &lpcr);
> + regmap_read(gpc->gpcv2, GPC_SLPCR, &slpcr);
> +
> + /* all cores' LPM settings must be same */
> + lpcr &= ~(BM_LPCR_A7_BSC_LPM0 | BM_LPCR_A7_BSC_LPM1);
> + lpcr |= BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> +
> + slpcr &= ~(BM_SLPCR_EN_DSM | BM_SLPCR_VSTBY | BM_SLPCR_RBC_EN
> |
> + BM_SLPCR_SBYOS | BM_SLPCR_BYPASS_PMIC_READY);
> +
> + switch (mode) {
> + case GPC_WAIT_CLOCKED:
> + break;
> + case GPC_WAIT_UNCLOCKED:
> + lpcr |= A7_LPM_WAIT;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + break;
> + case GPC_STOP_POWER_ON:
> + lpcr |= A7_LPM_STOP;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
> + BM_SLPCR_BYPASS_PMIC_READY);
> + break;
> + case GPC_STOP_POWER_OFF:
> + lpcr |= A7_LPM_STOP;
> + lpcr &= ~BM_LPCR_A7_BSC_CPU_CLK_ON_LPM;
> + slpcr |= (BM_SLPCR_EN_DSM | BM_SLPCR_RBC_EN |
> + BM_SLPCR_SBYOS | BM_SLPCR_VSTBY |
> + BM_SLPCR_BYPASS_PMIC_READY);
> + break;
> + default:
> + return;
> + }
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, lpcr);
> + regmap_write(gpc->gpcv2, GPC_SLPCR, slpcr); }
> +
> +static void imx_gpcv2_lpm_cpu_power_gate(struct imx_gpcv2 *gpc,
> + u32 cpu, bool engate)
> +{
> + u32 val;
> +
> + const u32 val_pdn[2] = {
> + BM_LPCR_A7_AD_EN_C0_PDN | BM_LPCR_A7_AD_EN_C0_PUP,
> + BM_LPCR_A7_AD_EN_C1_PDN | BM_LPCR_A7_AD_EN_C1_PUP,
> + };
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
> + if (engate)
> + val |= val_pdn[cpu];
> + else
> + val &= ~val_pdn[cpu];
> +
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val); }
> +
> +static void imx_lpm_plat_power_gate(struct imx_gpcv2 *gpc, bool engate)
> +{
> + u32 val;
> +
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_AD, &val);
> + val &= ~(BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE);
> + if (engate)
> + val |= BM_LPCR_A7_AD_EN_PLAT_PDN | BM_LPCR_A7_AD_L2PGE;
> +
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_AD, val); }
> +
> +static void imx_gpcv2_lpm_standby(struct imx_gpcv2 *gpc) {
> + struct imx_gpcv2_suspend *pm = gpc->pm;
> +
> + pm->lpm_env_setup(gpc);
> + /* pm->set_mode(gpc, GPC_STOP_POWER_OFF); */
> + pm->set_mode(gpc, GPC_WAIT_UNCLOCKED);
> +
> + /* Zzz ... */
> + cpu_do_idle();
> +
> + pm->set_mode(gpc, GPC_WAIT_CLOCKED);
> + pm->lpm_env_clean(gpc);
> +}
> +
> +static int gpcv2_suspend_finish(unsigned long val) {
> + struct imx_gpcv2_suspend *pm = (struct imx_gpcv2_suspend *)val;
> +
> + if (!pm->suspend_fn_in_ocram) {
> + cpu_do_idle();
> + } else {
> + /*
> + * call low level suspend function in ocram,
> + * as we need to float DDR IO.
> + */
> + local_flush_tlb_all();
> + pm->suspend_fn_in_ocram(pm->ocram_vbase);
> + }
> +
> + return 0;
> +}
> +
> +static void imx_gpcv2_lpm_suspend(struct imx_gpcv2 *gpc) {
> + struct imx_gpcv2_suspend *pm = gpc->pm;
> + u32 *sources;
> + int i, num;
> +
> + pm->lpm_env_setup(gpc);
> + pm->set_mode(gpc, GPC_STOP_POWER_OFF);
> +
> + /* enable core0 power down/up with low power mode */
> + pm->lpm_cpu_power_gate(gpc, 0, true);
> +
> + /* enable plat power down with low power mode */
> + pm->lpm_plat_power_gate(gpc, true);
> +
> + /*
> + * To avoid confuse, we use slot 0~4 for power down,
> + * slot 5~9 for power up.
> + *
> + * Power down slot sequence:
> + * Slot0 -> CORE0
> + * Slot1 -> Mega/Fast MIX
> + * Slot2 -> SCU
> + *
> + * Power up slot sequence:
> + * Slot5 -> Mega/Fast MIX
> + * Slot6 -> SCU
> + * Slot7 -> CORE0
> + */
> + pm->set_slot(gpc, 0, CORE0_A7, false);
> + pm->set_slot(gpc, 2, SCU_A7, false);
> +
> + if (gpc->get_wakeup_source) {
> + pm->set_slot(gpc, 1, FAST_MEGA_MIX, false);
> + pm->set_slot(gpc, 5, FAST_MEGA_MIX, true);
> + pm->lpm_enable_core(gpc, true, GPC_PGC_FM);
> + num = gpc->get_wakeup_source(&sources);
> + for (i = 0; i < num; i++) {
> + if ((~sources[i] & gpc->mfmix_mask[i]) == 0)
> + continue;
> + pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
> + break;
> + }
> + }
> +
> + pm->set_slot(gpc, 6, SCU_A7, true);
> + pm->set_slot(gpc, 7, CORE0_A7, true);
> +
> + /* Set Power down act */
> + pm->set_act(gpc, SCU_A7, false);
> +
> + /* Set Power up act */
> + pm->set_act(gpc, CORE0_A7, true);
> +
> + /* enable core0, scu */
> + pm->lpm_enable_core(gpc, true, GPC_PGC_C0);
> + pm->lpm_enable_core(gpc, true, GPC_PGC_SCU);
> +
> + cpu_suspend((unsigned long)pm, gpcv2_suspend_finish);
> +
> + pm->lpm_env_clean(gpc);
> + pm->set_mode(gpc, GPC_WAIT_CLOCKED);
> + pm->lpm_cpu_power_gate(gpc, 0, false);
> + pm->lpm_plat_power_gate(gpc, false);
> +
> + pm->lpm_enable_core(gpc, false, GPC_PGC_C0);
> + pm->lpm_enable_core(gpc, false, GPC_PGC_SCU);
> + pm->lpm_enable_core(gpc, false, GPC_PGC_FM);
> + pm->clear_slots(gpc);
> +}
> +
> +static int imx_gpcv2_pm_enter(suspend_state_t state) {
> + struct imx_gpcv2_suspend *pm;
> +
> + BUG_ON(!gpcv2_instance);
> + pm = gpcv2_instance->pm;
> +
> + switch (state) {
> + case PM_SUSPEND_STANDBY:
> + pm->standby(gpcv2_instance);
> + break;
> +
> + case PM_SUSPEND_MEM:
> + pm->suspend(gpcv2_instance);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int imx_gpcv2_pm_valid(suspend_state_t state) {
> + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; }
> +
> +static int __init imx_get_base_from_node(struct device_node *node,
> + struct imx7_pm_base *base)
> +{
> + struct resource res;
> + int ret = 0;
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = ioremap(res.start, resource_size(&res));
> + if (!base->vbase) {
> + iounmap(base->vbase);
> + ret = -ENOMEM;
> + }
> +put_node:
> + of_node_put(node);
> +
> + return ret;
> +}
> +
> +static int __init imx_get_base_from_dt(struct imx7_pm_base *base,
> + const char *compat)
> +{
> + struct device_node *node;
> + struct resource res;
> + int ret = 0;
> +
> + node = of_find_compatible_node(NULL, NULL, compat);
> + if (!node) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = ioremap(res.start, resource_size(&res));
> + if (!base->vbase)
> + ret = -ENOMEM;
> +
> +put_node:
> + of_node_put(node);
> +out:
> + return ret;
> +}
> +
> +static int __init imx_get_exec_base_from_dt(struct imx7_pm_base *base,
> + const char *compat)
> +{
> + struct device_node *node;
> + struct resource res;
> + int ret = 0;
> +
> + node = of_find_compatible_node(NULL, NULL, compat);
> + if (!node) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + ret = of_address_to_resource(node, 0, &res);
> + if (ret)
> + goto put_node;
> +
> + base->pbase = res.start;
> + base->vbase = __arm_ioremap_exec(res.start, resource_size(&res),
> +false);
> +
> + if (!base->vbase)
> + ret = -ENOMEM;
> +
> +put_node:
> + of_node_put(node);
> +out:
> + return ret;
> +}
> +
> +static int __init imx_gpcv2_suspend_init(struct imx_gpcv2_suspend *pm,
> + const struct imx7_pm_socdata *socdata) {
> + struct imx7_pm_base aips_base[3] = { {0, 0}, {0, 0}, {0, 0} };
> + struct imx7_pm_base sram_base = {0, 0};
> + struct imx7_cpu_pm_info *pm_info;
> + struct device_node *node = NULL;
> + int i, ret = 0;
> +
> + const u32 (*ddrc_phy_offset_array)[2];
> + const u32 (*ddrc_offset_array)[2];
> +
> + if (!socdata || !pm) {
> + pr_warn("%s: invalid argument!\n", __func__);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < 3; i++) {
> + node = of_find_compatible_node(node, NULL, "fsl,aips-bus");
> + if (!node) {
> + pr_warn("%s: failed to find aips %d node!\n",
> + __func__, i);
> + break;
> + }
> + ret = imx_get_base_from_node(node, &aips_base[i]);
> + if (ret) {
> + pr_warn("%s: failed to get aips[%d] base %d!\n",
> + __func__, i, ret);
> + }
> + }
> +
> + ret = imx_get_exec_base_from_dt(&sram_base, "fsl,lpm-sram");
> + if (ret) {
> + pr_warn("%s: failed to get lpm-sram base %d!\n",
> + __func__, ret);
> + goto lpm_sram_map_failed;
> + }
> +
> + pm_info = sram_base.vbase;
> + pm_info->pbase = sram_base.pbase;
> + pm_info->resume_addr = virt_to_phys(ca7_cpu_resume);
> + pm_info->pm_info_size = sizeof(*pm_info);
> +
> + ret = imx_get_base_from_dt(&pm_info->ccm_base,
> socdata->ccm_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ccm base %d!\n", __func__, ret);
> + goto ccm_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->ddrc_base,
> socdata->ddrc_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ddrc base %d!\n", __func__, ret);
> + goto ddrc_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->ddrc_phy_base,
> + socdata->ddrc_phy_compat);
> + if (ret) {
> + pr_warn("%s: failed to get ddrc_phy base %d!\n", __func__, ret);
> + goto ddrc_phy_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->src_base, socdata->src_compat);
> + if (ret) {
> + pr_warn("%s: failed to get src base %d!\n", __func__, ret);
> + goto src_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->iomuxc_gpr_base,
> + socdata->iomuxc_gpr_compat);
> + if (ret) {
> + pr_warn("%s: failed to get iomuxc_gpr base %d!\n",
> + __func__, ret);
> + goto iomuxc_gpr_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->gpc_base, socdata->gpc_compat);
> + if (ret) {
> + pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
> + goto gpc_map_failed;
> + }
> +
> + ret = imx_get_base_from_dt(&pm_info->anatop_base,
> + socdata->anatop_compat);
> + if (ret) {
> + pr_warn("%s: failed to get anatop base %d!\n", __func__, ret);
> + goto anatop_map_failed;
> + }
> +
> + pm_info->ddrc_num = socdata->ddrc_num;
> + ddrc_offset_array = socdata->ddrc_offset;
> + pm_info->ddrc_phy_num = socdata->ddrc_phy_num;
> + ddrc_phy_offset_array = socdata->ddrc_phy_offset;
> +
> + /* initialize DDRC settings */
> + for (i = 0; i < pm_info->ddrc_num; i++) {
> + pm_info->ddrc_val[i][0] = ddrc_offset_array[i][0];
> + if (ddrc_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
> + pm_info->ddrc_val[i][1] =
> + readl_relaxed(pm_info->ddrc_base.vbase +
> + ddrc_offset_array[i][0]);
> + else
> + pm_info->ddrc_val[i][1] = ddrc_offset_array[i][1];
> + }
> +
> + /* initialize DDRC PHY settings */
> + for (i = 0; i < pm_info->ddrc_phy_num; i++) {
> + pm_info->ddrc_phy_val[i][0] =
> + ddrc_phy_offset_array[i][0];
> + if (ddrc_phy_offset_array[i][1] == READ_DATA_FROM_HARDWARE)
> + pm_info->ddrc_phy_val[i][1] =
> + readl_relaxed(pm_info->ddrc_phy_base.vbase +
> + ddrc_phy_offset_array[i][0]);
> + else
> + pm_info->ddrc_phy_val[i][1] =
> + ddrc_phy_offset_array[i][1];
> + }
> +
> + pm->suspend_fn_in_ocram = fncpy(
> + sram_base.vbase + sizeof(*pm_info),
> + &imx7_suspend,
> + MX7_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
> + pm->ocram_vbase = sram_base.vbase;
> +
> + goto put_node;
> +
> +anatop_map_failed:
> + iounmap(pm_info->anatop_base.vbase);
> +gpc_map_failed:
> + iounmap(pm_info->gpc_base.vbase);
> +iomuxc_gpr_map_failed:
> + iounmap(pm_info->iomuxc_gpr_base.vbase);
> +src_map_failed:
> + iounmap(pm_info->src_base.vbase);
> +ddrc_phy_map_failed:
> + iounmap(pm_info->ddrc_phy_base.vbase);
> +ddrc_map_failed:
> + iounmap(pm_info->ddrc_base.vbase);
> +ccm_map_failed:
> + iounmap(pm_info->ccm_base.vbase);
> +lpm_sram_map_failed:
> + iounmap(sram_base.vbase);
> +put_node:
> + of_node_put(node);
> +
> + return ret;
> +}
> +
> +static const struct platform_suspend_ops imx_gpcv2_pm_ops = {
> + .enter = imx_gpcv2_pm_enter,
> + .valid = imx_gpcv2_pm_valid,
> +};
> +
> +static int __init imx_gpcv2_pm_init(void) {
> + struct imx_gpcv2_suspend *pm;
> + struct imx_gpcv2 *gpc;
> + int val, num;
> +
> + pm = kzalloc(sizeof(struct imx_gpcv2_suspend), GFP_KERNEL);
> + if (!pm) {
> + pr_warn("[GPCv2] %s init failed\r\n", __func__);
> + return -ENOMEM;
> + }
> +
> + gpc = kzalloc(sizeof(struct imx_gpcv2), GFP_KERNEL);
> + if (!gpc) {
> + pr_warn("[GPCv2] %s init failed\r\n", __func__);
> + kfree(pm);
> + return -ENOMEM;
> + }
> +
> + imx_gpcv2_suspend_init(pm, &imx7d_pm_data_ddr3);
> +
> + pm->lpm_env_setup = imx_gpcv2_lpm_env_setup;
> + pm->lpm_env_clean = imx_gpcv2_lpm_env_clean;
> +
> + pm->lpm_cpu_power_gate = imx_gpcv2_lpm_cpu_power_gate;
> + pm->lpm_plat_power_gate = imx_lpm_plat_power_gate;
> + pm->lpm_enable_core = imx_gpcv2_lpm_enable_core;
> + pm->set_mode = imx_gpcv2_lpm_set_mode;
> +
> + pm->clear_slots = imx_gpcv2_lpm_clear_slots;
> + pm->set_slot = imx_gpcv2_lpm_slot_setup;
> + pm->set_act = imx_gpcv2_lpm_set_ack;
> +
> + pm->standby = imx_gpcv2_lpm_standby;
> + pm->suspend = imx_gpcv2_lpm_suspend;
> +
> + gpc->anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
> + if (IS_ERR(gpc->anatop))
> + goto error_exit;
> +
> + gpc->gpcv2 = syscon_regmap_lookup_by_compatible("fsl,imx7d-gpc");
> + if (IS_ERR(gpc->gpcv2))
> + goto error_exit;
> +
> + /* only external IRQs to wake up LPM and core 0/1 */
> + regmap_read(gpc->gpcv2, GPC_LPCR_A7_BSC, &val);
> + val |= BM_LPCR_A7_BSC_IRQ_SRC_A7_WAKEUP;
> + regmap_write(gpc->gpcv2, GPC_LPCR_A7_BSC, val);
> + /* mask m4 dsm trigger */
> + regmap_read(gpc->gpcv2, GPC_LPCR_M4, &val);
> + val |= BM_LPCR_M4_MASK_DSM_TRIGGER;
> + regmap_write(gpc->gpcv2, GPC_LPCR_M4, val);
> +
> + /* set mega/fast mix in A7 domain */
> + regmap_write(gpc->gpcv2, GPC_PGC_CPU_MAPPING, 0x1);
> + /* set SCU timing */
> + val = (0x59 << 10) | 0x5B | (0x51 << 20);
> + regmap_write(gpc->gpcv2, GPC_PGC_SCU_TIMING, val);
> +
> + gpc->pm = pm;
> + gpc->get_wakeup_source = imx_gpcv2_get_wakeup_source;
> + gpcv2_instance = gpc;
> +
> + num = imx_gpcv2_get_wakeup_source(0);
> +
> + /*
> + * The IP blocks which may be the wakeup sources are allocated into
> + * several power domains. MFMIX, LPSRMX, and WAKEUPMIX are three of
> + * those power domains. If a bit is '1' in the mask, it means the IP
> + * block is inside the power domain. The mask will be used to decide
> + * if a power domain should be shutdown or not when system goes into
> + * suspend states.
> + */
> +
> + if (num)
> + gpc->wakeupmix_mask = kzalloc(sizeof(u32)*num*3, GFP_KERNEL);
> +
> + if (!gpc->wakeupmix_mask)
> + goto error_exit;
> +
> + /*
> + * Shutdown LPSRMIX and WAKEUP power domain has not been
> + * implemented in this patch yet.
> + */
> +
> + gpc->lpsrmix_mask = gpc->wakeupmix_mask + num;
> + gpc->mfmix_mask = gpc->wakeupmix_mask + num*2;
> +
> + /* Mask the wakeup sources in M/F power domain */
> + gpc->mfmix_mask[0] = 0x54010000;
> + gpc->mfmix_mask[1] = 0xC00;
> + gpc->mfmix_mask[2] = 0x0;
> + gpc->mfmix_mask[3] = 0x400010;
> +
> + suspend_set_ops(&imx_gpcv2_pm_ops);
> + return 0;
> +
> +error_exit:
> + kfree(pm);
> + kfree(gpc);
> + return -ENODEV;
> +}
> +
> +device_initcall(imx_gpcv2_pm_init);
> diff --git a/arch/arm/mach-imx/suspend-imx7.S
> b/arch/arm/mach-imx/suspend-imx7.S
> new file mode 100644
> index 0000000..8c3f516
> --- /dev/null
> +++ b/arch/arm/mach-imx/suspend-imx7.S
> @@ -0,0 +1,529 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/asm-offsets.h>
> +#include "hardware.h"
> +
> +/*
> + * ==================== low level suspend ====================
> + *
> + * Better to follow below rules to use ARM registers:
> + * r0: pm_info structure address;
> + * r1 ~ r4: for saving pm_info members;
> + * r5 ~ r10: free registers;
> + * r11: io base address.
> + *
> + * suspend ocram space layout:
> + * ======================== high address ======================
> + * .
> + * .
> + * .
> + * ^
> + * ^
> + * ^
> + * imx7_suspend code
> + * PM_INFO structure(imx7_cpu_pm_info)
> + * ======================== low address ======================= */
> +
> +/*
> + * Below offsets are based on struct imx7_cpu_pm_info
> + * which defined in arch/arm/mach-imx/pm-imx7.c, this
> + * structure contains necessary pm info for low level
> + * suspend related code.
> + */
> +#define PM_INFO_M4_RESERVE0_OFFSET 0x0
> +#define PM_INFO_M4_RESERVE1_OFFSET 0x4
> +#define PM_INFO_M4_RESERVE2_OFFSET 0x8
> +#define PM_INFO_PBASE_OFFSET 0xc
> +#define PM_INFO_RESUME_ADDR_OFFSET 0x10
> +#define PM_INFO_DDR_TYPE_OFFSET 0x14
> +#define PM_INFO_PM_INFO_SIZE_OFFSET 0x18
> +#define PM_INFO_MX7_DDRC_P_OFFSET 0x1c
> +#define PM_INFO_MX7_DDRC_V_OFFSET 0x20
> +#define PM_INFO_MX7_DDRC_PHY_P_OFFSET 0x24
> +#define PM_INFO_MX7_DDRC_PHY_V_OFFSET 0x28
> +#define PM_INFO_MX7_SRC_P_OFFSET 0x2c
> +#define PM_INFO_MX7_SRC_V_OFFSET 0x30
> +#define PM_INFO_MX7_IOMUXC_GPR_P_OFFSET 0x34
> +#define PM_INFO_MX7_IOMUXC_GPR_V_OFFSET 0x38
> +#define PM_INFO_MX7_CCM_P_OFFSET 0x3c
> +#define PM_INFO_MX7_CCM_V_OFFSET 0x40
> +#define PM_INFO_MX7_GPC_P_OFFSET 0x44
> +#define PM_INFO_MX7_GPC_V_OFFSET 0x48
> +#define PM_INFO_MX7_L2_P_OFFSET 0x4c
> +#define PM_INFO_MX7_L2_V_OFFSET 0x50
> +#define PM_INFO_MX7_ANATOP_P_OFFSET 0x54
> +#define PM_INFO_MX7_ANATOP_V_OFFSET 0x58
> +#define PM_INFO_MX7_TTBR1_V_OFFSET 0x5c
> +#define PM_INFO_DDRC_REG_NUM_OFFSET 0x60
> +#define PM_INFO_DDRC_REG_OFFSET 0x64
> +#define PM_INFO_DDRC_VALUE_OFFSET 0x68
> +#define PM_INFO_DDRC_PHY_REG_NUM_OFFSET 0x164
> +#define PM_INFO_DDRC_PHY_REG_OFFSET 0x168
> +#define PM_INFO_DDRC_PHY_VALUE_OFFSET 0x16c
> +
> +#define MX7_SRC_GPR1 0x74
> +#define MX7_SRC_GPR2 0x78
> +#define GPC_PGC_FM 0xa00
> +#define ANADIG_SNVS_MISC_CTRL 0x380
> +#define DDRC_STAT 0x4
> +#define DDRC_PWRCTL 0x30
> +#define DDRC_PSTAT 0x3fc
> +#define DDRC_PCTRL_0 0x490
> +#define DDRC_DFIMISC 0x1b0
> +#define DDRC_SWCTL 0x320
> +#define DDRC_SWSTAT 0x324
> +#define DDRPHY_LP_CON0 0x18
> +
> + .align 3
> +
> + .macro disable_l1_dcache
> +
> + /*
> + * Flush all data from the L1 data cache before disabling
> + * SCTLR.C bit.
> + */
> + push {r0 - r10, lr}
> + ldr r7, =v7_flush_dcache_all
> + mov lr, pc
> + mov pc, r7
> + pop {r0 - r10, lr}
> +
> + /* disable d-cache */
> + mrc p15, 0, r7, c1, c0, 0
> + bic r7, r7, #(1 << 2)
> + mcr p15, 0, r7, c1, c0, 0
> + dsb
> + isb
> +
> + push {r0 - r10, lr}
> + ldr r7, =v7_flush_dcache_all
> + mov lr, pc
> + mov pc, r7
> + pop {r0 - r10, lr}
> +
> + .endm
> +
> +
> + .macro enable_l1_dcache
> +
> + /* Enable L1 data cache. */
> + mrc p15, 0, r6, c1, c0, 0
> + orr r6, r6, #0x4
> + mcr p15, 0, r6, c1, c0, 0
> +
> + dsb
> + isb
> +
> + .endm
> +
> +
> + .macro ddrc_enter_self_refresh
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait rw port_busy clear */
> + ldr r6, =(0x1 << 16)
> + orr r6, r6, #0x1
> +1:
> + ldr r7, [r11, #DDRC_PSTAT]
> + ands r7, r7, r6
> + bne 1b
> +
> + /* enter self-refresh bit 5 */
> + ldr r7, =(0x1 << 5)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +2:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 2b
> +3:
> + ldr r7, [r11, #DDRC_STAT]
> + ands r7, r7, #0x20
> + beq 3b
> +
> + /* disable dram clk */
> + ldr r7, [r11, #DDRC_PWRCTL]
> + orr r7, r7, #(1 << 3)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + .endm
> +
> + .macro ddrc_exit_self_refresh
> +
> + cmp r5, #0x0
> + ldreq r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldrne r11, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +4:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + beq 4b
> +
> + /* enable auto self-refresh */
> + ldr r7, [r11, #DDRC_PWRCTL]
> + orr r7, r7, #(1 << 0)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + .endm
> +
> + .macro wait_delay
> +5:
> + subs r6, r6, #0x1
> + bne 5b
> +
> + .endm
> +
> + .macro ddr_enter_retention
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r11, #DDRC_PCTRL_0]
> +
> + /* wait rw port_busy clear */
> + ldr r6, =(0x1 << 16)
> + orr r6, r6, #0x1
> +6:
> + ldr r7, [r11, #DDRC_PSTAT]
> + ands r7, r7, r6
> + bne 6b
> +
> + ldr r11, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + /* enter self-refresh bit 5 */
> + ldr r7, =(0x1 << 5)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* wait until self-refresh mode entered */
> +7:
> + ldr r7, [r11, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 7b
> +8:
> + ldr r7, [r11, #DDRC_STAT]
> + ands r7, r7, #0x20
> + beq 8b
> +
> + /* disable dram clk */
> + ldr r7, =(0x1 << 5)
> + orr r7, r7, #(1 << 3)
> + str r7, [r11, #DDRC_PWRCTL]
> +
> + /* reset ddr_phy */
> + ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, =0x0
> + str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* delay 7 us */
> + ldr r6, =6000
> + wait_delay
> +
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldr r6, =0x1000
> + ldr r7, [r11, r6]
> + orr r7, r7, #0x1
> + str r7, [r11, r6]
> + /* turn off ddr power */
> + ldr r11, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, =(0x1 << 29)
> + str r7, [r11, #ANADIG_SNVS_MISC_CTRL]
> +
> + .endm
> +
> + .macro ddr_exit_retention
> +
> + cmp r5, #0x0
> + ldreq r1, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldrne r1, [r0, #PM_INFO_MX7_ANATOP_P_OFFSET]
> + ldreq r2, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldrne r2, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
> + ldreq r3, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldrne r3, [r0, #PM_INFO_MX7_DDRC_P_OFFSET]
> + ldreq r4, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
> + ldrne r4, [r0, #PM_INFO_MX7_DDRC_PHY_P_OFFSET]
> + ldreq r10, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
> + ldrne r10, [r0, #PM_INFO_MX7_CCM_P_OFFSET]
> + ldreq r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldrne r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_P_OFFSET]
> +
> + /* turn on ddr power */
> + ldr r7, =(0x1 << 29)
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + ldr r6, =50
> + wait_delay
> +
> + ldr r7, =0x0
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* clear ddr_phy reset */
> + ldr r6, =0x1000
> + ldr r7, [r2, r6]
> + orr r7, r7, #0x3
> + str r7, [r2, r6]
> + ldr r7, [r2, r6]
> + bic r7, r7, #0x1
> + str r7, [r2, r6]
> +
> + ldr r6, [r0, #PM_INFO_DDRC_REG_NUM_OFFSET]
> + ldr r7, =PM_INFO_DDRC_REG_OFFSET
> + add r7, r7, r0
> +9:
> + ldr r8, [r7], #0x4
> + ldr r9, [r7], #0x4
> + str r9, [r3, r8]
> + subs r6, r6, #0x1
> + bne 9b
> + ldr r7, =0x20
> + str r7, [r3, #DDRC_PWRCTL]
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_DFIMISC]
> +
> + /* do PHY, clear ddr_phy reset */
> + ldr r6, =0x1000
> + ldr r7, [r2, r6]
> + bic r7, r7, #0x2
> + str r7, [r2, r6]
> +
> + ldr r7, =(0x1 << 30)
> + str r7, [r1, #ANADIG_SNVS_MISC_CTRL]
> +
> + /* need to delay ~5mS */
> + ldr r6, =0x100000
> + wait_delay
> +
> + ldr r6, [r0, #PM_INFO_DDRC_PHY_REG_NUM_OFFSET]
> + ldr r7, =PM_INFO_DDRC_PHY_REG_OFFSET
> + add r7, r7, r0
> +
> +10:
> + ldr r8, [r7], #0x4
> + ldr r9, [r7], #0x4
> + str r9, [r4, r8]
> + subs r6, r6, #0x1
> + bne 10b
> +
> + ldr r7, =0x0
> + add r9, r10, #0x4000
> + str r7, [r9, #0x130]
> +
> + cmp r5, #0x0
> + beq 101f
> + ldr r7, =0x170
> + orr r7, r7, #0x8
> + str r7, [r11, #0x20]
> +
> +101:
> + ldr r7, =0x2
> + add r9, r10, #0x4000
> + str r7, [r9, #0x130]
> +
> + ldr r7, =0xf
> + str r7, [r4, #DDRPHY_LP_CON0]
> +
> + /* wait until self-refresh mode entered */
> +11:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x3
> + bne 11b
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_SWCTL]
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_DFIMISC]
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_SWCTL]
> +12:
> + ldr r7, [r3, #DDRC_SWSTAT]
> + and r7, r7, #0x1
> + cmp r7, #0x1
> + bne 12b
> +13:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x20
> + cmp r7, #0x20
> + bne 13b
> +
> + /* let DDR out of self-refresh */
> + ldr r7, =0x0
> + str r7, [r3, #DDRC_PWRCTL]
> +14:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x30
> + cmp r7, #0x0
> + bne 14b
> +
> +15:
> + ldr r7, [r3, #DDRC_STAT]
> + and r7, r7, #0x3
> + cmp r7, #0x1
> + bne 15b
> +
> + /* enable port */
> + ldr r7, =0x1
> + str r7, [r3, #DDRC_PCTRL_0]
> +
> + .endm
> +
> +ENTRY(imx7_suspend)
> + push {r4-r12}
> +
> + /*
> + * The value of r0 is mapped the same in origin table and IRAM table,
> + * thus no need to care r0 here.
> + */
> + ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
> + ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
> + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
> + ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
> +
> + /*
> + * counting the resume address in iram
> + * to set it in SRC register.
> + */
> + ldr r6, =imx7_suspend
> + ldr r7, =resume
> + sub r7, r7, r6
> + add r8, r1, r4
> + add r9, r8, r7
> +
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + /* store physical resume addr and pm_info address. */
> + str r9, [r11, #MX7_SRC_GPR1]
> + str r1, [r11, #MX7_SRC_GPR2]
> +
> + disable_l1_dcache
> +
> + /*
> + * make sure TLB contain the addr we want,
> + * as we will access them after DDR is in
> + * self-refresh mode.
> + */
> + ldr r6, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldr r7, [r0, #0x0]
> + ldr r6, [r0, #PM_INFO_MX7_CCM_V_OFFSET]
> + add r6, #0x4000
> + ldr r7, [r6]
> + ldr r6, [r0, #PM_INFO_MX7_ANATOP_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + ldr r6, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + add r6, #0x1000
> + ldr r7, [r6]
> + ldr r6, [r0, #PM_INFO_MX7_DDRC_V_OFFSET]
> + ldr r7, [r6, #0x0]
> + ldr r7, [r6, #0x490]
> + ldr r6, [r0, #PM_INFO_MX7_DDRC_PHY_V_OFFSET]
> + ldr r7, [r6, #0x0]
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq ddr_only_self_refresh
> +
> + ddr_enter_retention
> + b ddr_retention_enter_out
> +ddr_only_self_refresh:
> + ddrc_enter_self_refresh
> +ddr_retention_enter_out:
> +
> + /* Zzz, enter stop mode */
> + wfi
> + nop
> + nop
> + nop
> + nop
> +
> + mov r5, #0x0
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_V_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq wfi_ddr_self_refresh_out
> +
> + ddr_exit_retention
> + b wfi_ddr_retention_out
> +wfi_ddr_self_refresh_out:
> + ddrc_exit_self_refresh
> +wfi_ddr_retention_out:
> +
> + ldr r11, [r0, #PM_INFO_MX7_IOMUXC_GPR_V_OFFSET]
> + ldr r7, =0x170
> + orr r7, r7, #0x8
> + str r7, [r11, #0x20]
> +
> + /* clear core0's entry and parameter */
> + ldr r11, [r0, #PM_INFO_MX7_SRC_V_OFFSET]
> + mov r7, #0x0
> + str r7, [r11, #MX7_SRC_GPR1]
> + str r7, [r11, #MX7_SRC_GPR2]
> +
> + enable_l1_dcache
> +
> + pop {r4-r12}
> + /* return to suspend finish */
> + mov pc, lr
> +
> +resume:
> + /* invalidate L1 I-cache first */
> + mov r6, #0x0
> + mcr p15, 0, r6, c7, c5, 0
> + mcr p15, 0, r6, c7, c5, 6
> + /* enable the Icache and branch prediction */
> + mov r6, #0x1800
> + mcr p15, 0, r6, c1, c0, 0
> + isb
> +
> + /* get physical resume address from pm_info. */
> + ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
> + /* clear core0's entry and parameter */
> + ldr r11, [r0, #PM_INFO_MX7_SRC_P_OFFSET]
> + mov r7, #0x0
> + str r7, [r11, #MX7_SRC_GPR1]
> + str r7, [r11, #MX7_SRC_GPR2]
> +
> + mov r5, #0x1
> +
> + ldr r11, [r0, #PM_INFO_MX7_GPC_P_OFFSET]
> + ldr r7, [r11, #GPC_PGC_FM]
> + cmp r7, #0
> + beq dsm_ddr_self_refresh_out
> +
> + ddr_exit_retention
> + b dsm_ddr_retention_out
> +dsm_ddr_self_refresh_out:
> + ddrc_exit_self_refresh
> +dsm_ddr_retention_out:
> +
> + mov pc, lr
> +ENDPROC(imx7_suspend)
> +
> +ENTRY(ca7_cpu_resume)
> + bl v7_invalidate_l1
> + b cpu_resume
> +ENDPROC(ca7_cpu_resume)
> --
> 2.5.0.rc2
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-07-31 21:33 ` Shenwei Wang
@ 2015-09-07 15:11 ` Shawn Guo
-1 siblings, 0 replies; 36+ messages in thread
From: Shawn Guo @ 2015-09-07 15:11 UTC (permalink / raw)
To: Shenwei Wang
Cc: shawn.guo, tglx, jason, b20788, linux-kernel, linux-arm-kernel,
Sudeep Holla
On Fri, Jul 31, 2015 at 04:33:59PM -0500, Shenwei Wang wrote:
> IMX7D contains a new version of GPC IP block (GPCv2). It has two
> major functions: power management and wakeup source management.
>
> GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4
> domains. And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
> After configuring the GPCv2 module, the platform can enter into a
> selected mode either automatically triggered by ARM WFI instruction or
> manually by software. The system will exit the low power states
> by the predefined wakeup sources which are managed by the gpcv2
> irqchip driver.
>
> This patch adds a new suspend driver to manage the power states on IMX7D.
> It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
Please stop sending patches to my Linaro mailbox, and use
shawnguo@kernel.org instead. You should already get that if you ever
run ./scripts/get_maintainer.pl on the patch. Also please always copy
kernel@pengutronix.de for i.MX platform patches like this.
> ---
> arch/arm/mach-imx/Kconfig | 1 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/common.h | 4 +
> arch/arm/mach-imx/pm-imx7.c | 917 +++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> 5 files changed, 1453 insertions(+)
1453 lines addition to kernel only for i.MX7D suspend support. Yes,
this is the way we support suspend on i.MX6, but that's enough, and
we have to stop this somewhere. I would ask you to take Sudeep's
comment and adopt PSCI for i.MX7D power management.
Shawn
[1] https://lkml.org/lkml/2015/8/26/554
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-09-07 15:11 ` Shawn Guo
0 siblings, 0 replies; 36+ messages in thread
From: Shawn Guo @ 2015-09-07 15:11 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 31, 2015 at 04:33:59PM -0500, Shenwei Wang wrote:
> IMX7D contains a new version of GPC IP block (GPCv2). It has two
> major functions: power management and wakeup source management.
>
> GPCv2 provides low power mode control for Cortex-A7 and Cortex-M4
> domains. And it can support WAIT, STOP, and DSM(Deep Sleep Mode) modes.
> After configuring the GPCv2 module, the platform can enter into a
> selected mode either automatically triggered by ARM WFI instruction or
> manually by software. The system will exit the low power states
> by the predefined wakeup sources which are managed by the gpcv2
> irqchip driver.
>
> This patch adds a new suspend driver to manage the power states on IMX7D.
> It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> Signed-off-by: Anson Huang <b20788@freescale.com>
Please stop sending patches to my Linaro mailbox, and use
shawnguo at kernel.org instead. You should already get that if you ever
run ./scripts/get_maintainer.pl on the patch. Also please always copy
kernel at pengutronix.de for i.MX platform patches like this.
> ---
> arch/arm/mach-imx/Kconfig | 1 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/common.h | 4 +
> arch/arm/mach-imx/pm-imx7.c | 917 +++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> 5 files changed, 1453 insertions(+)
1453 lines addition to kernel only for i.MX7D suspend support. Yes,
this is the way we support suspend on i.MX6, but that's enough, and
we have to stop this somewhere. I would ask you to take Sudeep's
comment and adopt PSCI for i.MX7D power management.
Shawn
[1] https://lkml.org/lkml/2015/8/26/554
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-09-07 15:11 ` Shawn Guo
@ 2015-09-08 15:01 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-09-08 15:01 UTC (permalink / raw)
To: Shawn Guo
Cc: shawn.guo, tglx, jason, Huang Anson, linux-kernel,
linux-arm-kernel, Sudeep Holla, kernel
> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo@kernel.org]
> > This patch adds a new suspend driver to manage the power states on IMX7D.
> > It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
> >
> > Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> > Signed-off-by: Anson Huang <b20788@freescale.com>
>
> Please stop sending patches to my Linaro mailbox, and use
> shawnguo@kernel.org instead. You should already get that if you ever
> run ./scripts/get_maintainer.pl on the patch. Also please always copy
> kernel@pengutronix.de for i.MX platform patches like this.
Noted.
> > ---
> > arch/arm/mach-imx/Kconfig | 1 +
> > arch/arm/mach-imx/Makefile | 2 +
> > arch/arm/mach-imx/common.h | 4 +
> > arch/arm/mach-imx/pm-imx7.c | 917
> +++++++++++++++++++++++++++++++++++++++
> > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> > 5 files changed, 1453 insertions(+)
>
> 1453 lines addition to kernel only for i.MX7D suspend support. Yes, this is the
> way we support suspend on i.MX6, but that's enough, and we have to stop this
> somewhere. I would ask you to take Sudeep's comment and adopt PSCI for
> i.MX7D power management.
According to PSCI spec, a supervisory software must be implemented under either
HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we could finally move
these 1453 lines of codes from kernel into a platform specific firmware. The problem
is we don't have the firmware so far, and we haven't even had a plan to enable the
hypervisor or secure software on this platform. Because low power consumption is
the key feature of this i.MX7D platform, please continue to consider the current
implementation and get this feature supported first.
Thanks,
Shenwei
> Shawn
>
> [1] https://lkml.org/lkml/2015/8/26/554
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-09-08 15:01 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-09-08 15:01 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> > This patch adds a new suspend driver to manage the power states on IMX7D.
> > It currently supports "SUSPEND_STANDBY" and "SUSPEND_MEM" states.
> >
> > Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
> > Signed-off-by: Anson Huang <b20788@freescale.com>
>
> Please stop sending patches to my Linaro mailbox, and use
> shawnguo at kernel.org instead. You should already get that if you ever
> run ./scripts/get_maintainer.pl on the patch. Also please always copy
> kernel at pengutronix.de for i.MX platform patches like this.
Noted.
> > ---
> > arch/arm/mach-imx/Kconfig | 1 +
> > arch/arm/mach-imx/Makefile | 2 +
> > arch/arm/mach-imx/common.h | 4 +
> > arch/arm/mach-imx/pm-imx7.c | 917
> +++++++++++++++++++++++++++++++++++++++
> > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> > 5 files changed, 1453 insertions(+)
>
> 1453 lines addition to kernel only for i.MX7D suspend support. Yes, this is the
> way we support suspend on i.MX6, but that's enough, and we have to stop this
> somewhere. I would ask you to take Sudeep's comment and adopt PSCI for
> i.MX7D power management.
According to PSCI spec, a supervisory software must be implemented under either
HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we could finally move
these 1453 lines of codes from kernel into a platform specific firmware. The problem
is we don't have the firmware so far, and we haven't even had a plan to enable the
hypervisor or secure software on this platform. Because low power consumption is
the key feature of this i.MX7D platform, please continue to consider the current
implementation and get this feature supported first.
Thanks,
Shenwei
> Shawn
>
> [1] https://lkml.org/lkml/2015/8/26/554
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-09-08 15:01 ` Shenwei Wang
@ 2015-09-18 14:15 ` Shawn Guo
-1 siblings, 0 replies; 36+ messages in thread
From: Shawn Guo @ 2015-09-18 14:15 UTC (permalink / raw)
To: Shenwei Wang
Cc: jason, Huang Anson, linux-kernel, kernel, Sudeep Holla, tglx,
shawn.guo, linux-arm-kernel
On Tue, Sep 08, 2015 at 03:01:07PM +0000, Shenwei Wang wrote:
> > > arch/arm/mach-imx/Kconfig | 1 +
> > > arch/arm/mach-imx/Makefile | 2 +
> > > arch/arm/mach-imx/common.h | 4 +
> > > arch/arm/mach-imx/pm-imx7.c | 917
> > +++++++++++++++++++++++++++++++++++++++
> > > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> > > 5 files changed, 1453 insertions(+)
> >
> > 1453 lines addition to kernel only for i.MX7D suspend support. Yes, this is the
> > way we support suspend on i.MX6, but that's enough, and we have to stop this
> > somewhere. I would ask you to take Sudeep's comment and adopt PSCI for
> > i.MX7D power management.
>
> According to PSCI spec, a supervisory software must be implemented under either
> HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we could finally move
> these 1453 lines of codes from kernel into a platform specific firmware. The problem
> is we don't have the firmware so far, and we haven't even had a plan to enable the
> hypervisor or secure software on this platform. Because low power consumption is
> the key feature of this i.MX7D platform, please continue to consider the current
> implementation and get this feature supported first.
Can't U-Boot be considered as a firmware to implement PSCI? I have seen
an initial ARMv7 PSCI core support for U-Boot added by Marc Zyngier.
Shawn
[1] http://lists.denx.de/pipermail/u-boot/2013-December/168655.html
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-09-18 14:15 ` Shawn Guo
0 siblings, 0 replies; 36+ messages in thread
From: Shawn Guo @ 2015-09-18 14:15 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Sep 08, 2015 at 03:01:07PM +0000, Shenwei Wang wrote:
> > > arch/arm/mach-imx/Kconfig | 1 +
> > > arch/arm/mach-imx/Makefile | 2 +
> > > arch/arm/mach-imx/common.h | 4 +
> > > arch/arm/mach-imx/pm-imx7.c | 917
> > +++++++++++++++++++++++++++++++++++++++
> > > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> > > 5 files changed, 1453 insertions(+)
> >
> > 1453 lines addition to kernel only for i.MX7D suspend support. Yes, this is the
> > way we support suspend on i.MX6, but that's enough, and we have to stop this
> > somewhere. I would ask you to take Sudeep's comment and adopt PSCI for
> > i.MX7D power management.
>
> According to PSCI spec, a supervisory software must be implemented under either
> HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we could finally move
> these 1453 lines of codes from kernel into a platform specific firmware. The problem
> is we don't have the firmware so far, and we haven't even had a plan to enable the
> hypervisor or secure software on this platform. Because low power consumption is
> the key feature of this i.MX7D platform, please continue to consider the current
> implementation and get this feature supported first.
Can't U-Boot be considered as a firmware to implement PSCI? I have seen
an initial ARMv7 PSCI core support for U-Boot added by Marc Zyngier.
Shawn
[1] http://lists.denx.de/pipermail/u-boot/2013-December/168655.html
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-09-18 14:15 ` Shawn Guo
@ 2015-09-18 14:38 ` Shenwei Wang
-1 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-09-18 14:38 UTC (permalink / raw)
To: Shawn Guo
Cc: jason, Huang Anson, linux-kernel, kernel, Sudeep Holla, tglx,
shawn.guo, linux-arm-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 2576 bytes --]
> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo@kernel.org]
> Sent: 2015Äê9ÔÂ18ÈÕ 9:15
> To: Wang Shenwei-B38339
> Cc: jason@lakedaemon.net; Huang Yongcai-B20788;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; Sudeep Holla;
> tglx@linutronix.de; shawn.guo@linaro.org; linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
>
> On Tue, Sep 08, 2015 at 03:01:07PM +0000, Shenwei Wang wrote:
> > > > arch/arm/mach-imx/Kconfig | 1 +
> > > > arch/arm/mach-imx/Makefile | 2 +
> > > > arch/arm/mach-imx/common.h | 4 +
> > > > arch/arm/mach-imx/pm-imx7.c | 917
> > > +++++++++++++++++++++++++++++++++++++++
> > > > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> > > > 5 files changed, 1453 insertions(+)
> > >
> > > 1453 lines addition to kernel only for i.MX7D suspend support. Yes,
> > > this is the way we support suspend on i.MX6, but that's enough, and
> > > we have to stop this somewhere. I would ask you to take Sudeep's
> > > comment and adopt PSCI for i.MX7D power management.
> >
> > According to PSCI spec, a supervisory software must be implemented
> > under either
> > HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we
> > could finally move these 1453 lines of codes from kernel into a
> > platform specific firmware. The problem is we don't have the firmware
> > so far, and we haven't even had a plan to enable the hypervisor or
> > secure software on this platform. Because low power consumption is the
> > key feature of this i.MX7D platform, please continue to consider the current
> implementation and get this feature supported first.
>
> Can't U-Boot be considered as a firmware to implement PSCI? I have seen an
> initial ARMv7 PSCI core support for U-Boot added by Marc Zyngier.
The current PSCI support in uboot is not complete. It can now support cpuidle, shutdown,
and reset. But to support system suspend, there would be a lot more tasks. For example,
even the current wakeup source management codes will have to move into the firmware
too. It is not a short time task. Please continue to consider this platform dependent implementation
first, meanwhile, we will start to migrate the solution to PSCI. However it will take some time.
Thanks,
Shenwei
> Shawn
>
> [1] http://lists.denx.de/pipermail/u-boot/2013-December/168655.html
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-09-18 14:38 ` Shenwei Wang
0 siblings, 0 replies; 36+ messages in thread
From: Shenwei Wang @ 2015-09-18 14:38 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Shawn Guo [mailto:shawnguo at kernel.org]
> Sent: 2015?9?18? 9:15
> To: Wang Shenwei-B38339
> Cc: jason at lakedaemon.net; Huang Yongcai-B20788;
> linux-kernel at vger.kernel.org; kernel at pengutronix.de; Sudeep Holla;
> tglx at linutronix.de; shawn.guo at linaro.org; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
>
> On Tue, Sep 08, 2015 at 03:01:07PM +0000, Shenwei Wang wrote:
> > > > arch/arm/mach-imx/Kconfig | 1 +
> > > > arch/arm/mach-imx/Makefile | 2 +
> > > > arch/arm/mach-imx/common.h | 4 +
> > > > arch/arm/mach-imx/pm-imx7.c | 917
> > > +++++++++++++++++++++++++++++++++++++++
> > > > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> > > > 5 files changed, 1453 insertions(+)
> > >
> > > 1453 lines addition to kernel only for i.MX7D suspend support. Yes,
> > > this is the way we support suspend on i.MX6, but that's enough, and
> > > we have to stop this somewhere. I would ask you to take Sudeep's
> > > comment and adopt PSCI for i.MX7D power management.
> >
> > According to PSCI spec, a supervisory software must be implemented
> > under either
> > HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we
> > could finally move these 1453 lines of codes from kernel into a
> > platform specific firmware. The problem is we don't have the firmware
> > so far, and we haven't even had a plan to enable the hypervisor or
> > secure software on this platform. Because low power consumption is the
> > key feature of this i.MX7D platform, please continue to consider the current
> implementation and get this feature supported first.
>
> Can't U-Boot be considered as a firmware to implement PSCI? I have seen an
> initial ARMv7 PSCI core support for U-Boot added by Marc Zyngier.
The current PSCI support in uboot is not complete. It can now support cpuidle, shutdown,
and reset. But to support system suspend, there would be a lot more tasks. For example,
even the current wakeup source management codes will have to move into the firmware
too. It is not a short time task. Please continue to consider this platform dependent implementation
first, meanwhile, we will start to migrate the solution to PSCI. However it will take some time.
Thanks,
Shenwei
> Shawn
>
> [1] http://lists.denx.de/pipermail/u-boot/2013-December/168655.html
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-09-18 14:38 ` Shenwei Wang
@ 2015-09-19 1:12 ` Shawn Guo
-1 siblings, 0 replies; 36+ messages in thread
From: Shawn Guo @ 2015-09-19 1:12 UTC (permalink / raw)
To: Shenwei Wang
Cc: jason, Huang Anson, linux-kernel, kernel, Sudeep Holla, tglx,
shawn.guo, linux-arm-kernel
On Fri, Sep 18, 2015 at 02:38:39PM +0000, Shenwei Wang wrote:
>
>
> > -----Original Message-----
> > From: Shawn Guo [mailto:shawnguo@kernel.org]
> > Sent: 2015年9月18日 9:15
> > To: Wang Shenwei-B38339
> > Cc: jason@lakedaemon.net; Huang Yongcai-B20788;
> > linux-kernel@vger.kernel.org; kernel@pengutronix.de; Sudeep Holla;
> > tglx@linutronix.de; shawn.guo@linaro.org; linux-arm-kernel@lists.infradead.org
> > Subject: Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
> >
> > On Tue, Sep 08, 2015 at 03:01:07PM +0000, Shenwei Wang wrote:
> > > > > arch/arm/mach-imx/Kconfig | 1 +
> > > > > arch/arm/mach-imx/Makefile | 2 +
> > > > > arch/arm/mach-imx/common.h | 4 +
> > > > > arch/arm/mach-imx/pm-imx7.c | 917
> > > > +++++++++++++++++++++++++++++++++++++++
> > > > > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> > > > > 5 files changed, 1453 insertions(+)
> > > >
> > > > 1453 lines addition to kernel only for i.MX7D suspend support. Yes,
> > > > this is the way we support suspend on i.MX6, but that's enough, and
> > > > we have to stop this somewhere. I would ask you to take Sudeep's
> > > > comment and adopt PSCI for i.MX7D power management.
> > >
> > > According to PSCI spec, a supervisory software must be implemented
> > > under either
> > > HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we
> > > could finally move these 1453 lines of codes from kernel into a
> > > platform specific firmware. The problem is we don't have the firmware
> > > so far, and we haven't even had a plan to enable the hypervisor or
> > > secure software on this platform. Because low power consumption is the
> > > key feature of this i.MX7D platform, please continue to consider the current
> > implementation and get this feature supported first.
> >
> > Can't U-Boot be considered as a firmware to implement PSCI? I have seen an
> > initial ARMv7 PSCI core support for U-Boot added by Marc Zyngier.
>
> The current PSCI support in uboot is not complete. It can now support cpuidle, shutdown,
> and reset. But to support system suspend, there would be a lot more tasks. For example,
> even the current wakeup source management codes will have to move into the firmware
> too. It is not a short time task. Please continue to consider this platform dependent implementation
> first, meanwhile, we will start to migrate the solution to PSCI. However it will take some time.
I have zero interest to maintain this pile of code in the mainline
kernel. Take it as a motivation to move to PSCI soon, or you maintain
it on your own as a out-of-tree patch for whatever long time you like.
Shawn
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-09-19 1:12 ` Shawn Guo
0 siblings, 0 replies; 36+ messages in thread
From: Shawn Guo @ 2015-09-19 1:12 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Sep 18, 2015 at 02:38:39PM +0000, Shenwei Wang wrote:
>
>
> > -----Original Message-----
> > From: Shawn Guo [mailto:shawnguo at kernel.org]
> > Sent: 2015?9?18? 9:15
> > To: Wang Shenwei-B38339
> > Cc: jason at lakedaemon.net; Huang Yongcai-B20788;
> > linux-kernel at vger.kernel.org; kernel at pengutronix.de; Sudeep Holla;
> > tglx at linutronix.de; shawn.guo at linaro.org; linux-arm-kernel at lists.infradead.org
> > Subject: Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
> >
> > On Tue, Sep 08, 2015 at 03:01:07PM +0000, Shenwei Wang wrote:
> > > > > arch/arm/mach-imx/Kconfig | 1 +
> > > > > arch/arm/mach-imx/Makefile | 2 +
> > > > > arch/arm/mach-imx/common.h | 4 +
> > > > > arch/arm/mach-imx/pm-imx7.c | 917
> > > > +++++++++++++++++++++++++++++++++++++++
> > > > > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
> > > > > 5 files changed, 1453 insertions(+)
> > > >
> > > > 1453 lines addition to kernel only for i.MX7D suspend support. Yes,
> > > > this is the way we support suspend on i.MX6, but that's enough, and
> > > > we have to stop this somewhere. I would ask you to take Sudeep's
> > > > comment and adopt PSCI for i.MX7D power management.
> > >
> > > According to PSCI spec, a supervisory software must be implemented
> > > under either
> > > HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we
> > > could finally move these 1453 lines of codes from kernel into a
> > > platform specific firmware. The problem is we don't have the firmware
> > > so far, and we haven't even had a plan to enable the hypervisor or
> > > secure software on this platform. Because low power consumption is the
> > > key feature of this i.MX7D platform, please continue to consider the current
> > implementation and get this feature supported first.
> >
> > Can't U-Boot be considered as a firmware to implement PSCI? I have seen an
> > initial ARMv7 PSCI core support for U-Boot added by Marc Zyngier.
>
> The current PSCI support in uboot is not complete. It can now support cpuidle, shutdown,
> and reset. But to support system suspend, there would be a lot more tasks. For example,
> even the current wakeup source management codes will have to move into the firmware
> too. It is not a short time task. Please continue to consider this platform dependent implementation
> first, meanwhile, we will start to migrate the solution to PSCI. However it will take some time.
I have zero interest to maintain this pile of code in the mainline
kernel. Take it as a motivation to move to PSCI soon, or you maintain
it on your own as a out-of-tree patch for whatever long time you like.
Shawn
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-09-19 1:12 ` Shawn Guo
@ 2015-10-01 16:31 ` Zhi Li
-1 siblings, 0 replies; 36+ messages in thread
From: Zhi Li @ 2015-10-01 16:31 UTC (permalink / raw)
To: Shawn Guo
Cc: Shenwei Wang, jason, Huang Anson, linux-kernel, kernel,
Sudeep Holla, tglx, shawn.guo, linux-arm-kernel
On Fri, Sep 18, 2015 at 8:12 PM, Shawn Guo <shawnguo@kernel.org> wrote:
> On Fri, Sep 18, 2015 at 02:38:39PM +0000, Shenwei Wang wrote:
>>
>>
>> > -----Original Message-----
>> > From: Shawn Guo [mailto:shawnguo@kernel.org]
>> > Sent: 2015年9月18日 9:15
>> > To: Wang Shenwei-B38339
>> > Cc: jason@lakedaemon.net; Huang Yongcai-B20788;
>> > linux-kernel@vger.kernel.org; kernel@pengutronix.de; Sudeep Holla;
>> > tglx@linutronix.de; shawn.guo@linaro.org; linux-arm-kernel@lists.infradead.org
>> > Subject: Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
>> >
>> > On Tue, Sep 08, 2015 at 03:01:07PM +0000, Shenwei Wang wrote:
>> > > > > arch/arm/mach-imx/Kconfig | 1 +
>> > > > > arch/arm/mach-imx/Makefile | 2 +
>> > > > > arch/arm/mach-imx/common.h | 4 +
>> > > > > arch/arm/mach-imx/pm-imx7.c | 917
>> > > > +++++++++++++++++++++++++++++++++++++++
>> > > > > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
>> > > > > 5 files changed, 1453 insertions(+)
>> > > >
>> > > > 1453 lines addition to kernel only for i.MX7D suspend support. Yes,
>> > > > this is the way we support suspend on i.MX6, but that's enough, and
>> > > > we have to stop this somewhere. I would ask you to take Sudeep's
>> > > > comment and adopt PSCI for i.MX7D power management.
>> > >
>> > > According to PSCI spec, a supervisory software must be implemented
>> > > under either
>> > > HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we
>> > > could finally move these 1453 lines of codes from kernel into a
>> > > platform specific firmware. The problem is we don't have the firmware
>> > > so far, and we haven't even had a plan to enable the hypervisor or
>> > > secure software on this platform. Because low power consumption is the
>> > > key feature of this i.MX7D platform, please continue to consider the current
>> > implementation and get this feature supported first.
>> >
>> > Can't U-Boot be considered as a firmware to implement PSCI? I have seen an
>> > initial ARMv7 PSCI core support for U-Boot added by Marc Zyngier.
>>
>> The current PSCI support in uboot is not complete. It can now support cpuidle, shutdown,
>> and reset. But to support system suspend, there would be a lot more tasks. For example,
>> even the current wakeup source management codes will have to move into the firmware
>> too. It is not a short time task. Please continue to consider this platform dependent implementation
>> first, meanwhile, we will start to migrate the solution to PSCI. However it will take some time.
>
> I have zero interest to maintain this pile of code in the mainline
> kernel. Take it as a motivation to move to PSCI soon, or you maintain
> it on your own as a out-of-tree patch for whatever long time you like.
>
Does it means that SMP support also need go through PSCI?
best regards
Frank Li
> Shawn
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-10-01 16:31 ` Zhi Li
0 siblings, 0 replies; 36+ messages in thread
From: Zhi Li @ 2015-10-01 16:31 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Sep 18, 2015 at 8:12 PM, Shawn Guo <shawnguo@kernel.org> wrote:
> On Fri, Sep 18, 2015 at 02:38:39PM +0000, Shenwei Wang wrote:
>>
>>
>> > -----Original Message-----
>> > From: Shawn Guo [mailto:shawnguo at kernel.org]
>> > Sent: 2015?9?18? 9:15
>> > To: Wang Shenwei-B38339
>> > Cc: jason at lakedaemon.net; Huang Yongcai-B20788;
>> > linux-kernel at vger.kernel.org; kernel at pengutronix.de; Sudeep Holla;
>> > tglx at linutronix.de; shawn.guo at linaro.org; linux-arm-kernel at lists.infradead.org
>> > Subject: Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
>> >
>> > On Tue, Sep 08, 2015 at 03:01:07PM +0000, Shenwei Wang wrote:
>> > > > > arch/arm/mach-imx/Kconfig | 1 +
>> > > > > arch/arm/mach-imx/Makefile | 2 +
>> > > > > arch/arm/mach-imx/common.h | 4 +
>> > > > > arch/arm/mach-imx/pm-imx7.c | 917
>> > > > +++++++++++++++++++++++++++++++++++++++
>> > > > > arch/arm/mach-imx/suspend-imx7.S | 529 ++++++++++++++++++++++
>> > > > > 5 files changed, 1453 insertions(+)
>> > > >
>> > > > 1453 lines addition to kernel only for i.MX7D suspend support. Yes,
>> > > > this is the way we support suspend on i.MX6, but that's enough, and
>> > > > we have to stop this somewhere. I would ask you to take Sudeep's
>> > > > comment and adopt PSCI for i.MX7D power management.
>> > >
>> > > According to PSCI spec, a supervisory software must be implemented
>> > > under either
>> > > HVC(EL2) or SMC(EL3) privilege level. I agree that, with this idea, we
>> > > could finally move these 1453 lines of codes from kernel into a
>> > > platform specific firmware. The problem is we don't have the firmware
>> > > so far, and we haven't even had a plan to enable the hypervisor or
>> > > secure software on this platform. Because low power consumption is the
>> > > key feature of this i.MX7D platform, please continue to consider the current
>> > implementation and get this feature supported first.
>> >
>> > Can't U-Boot be considered as a firmware to implement PSCI? I have seen an
>> > initial ARMv7 PSCI core support for U-Boot added by Marc Zyngier.
>>
>> The current PSCI support in uboot is not complete. It can now support cpuidle, shutdown,
>> and reset. But to support system suspend, there would be a lot more tasks. For example,
>> even the current wakeup source management codes will have to move into the firmware
>> too. It is not a short time task. Please continue to consider this platform dependent implementation
>> first, meanwhile, we will start to migrate the solution to PSCI. However it will take some time.
>
> I have zero interest to maintain this pile of code in the mainline
> kernel. Take it as a motivation to move to PSCI soon, or you maintain
> it on your own as a out-of-tree patch for whatever long time you like.
>
Does it means that SMP support also need go through PSCI?
best regards
Frank Li
> Shawn
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
2015-10-01 16:31 ` Zhi Li
@ 2015-10-08 6:37 ` Shawn Guo
-1 siblings, 0 replies; 36+ messages in thread
From: Shawn Guo @ 2015-10-08 6:37 UTC (permalink / raw)
To: Zhi Li
Cc: Shenwei Wang, jason, Huang Anson, linux-kernel, kernel,
Sudeep Holla, tglx, shawn.guo, linux-arm-kernel
On Thu, Oct 01, 2015 at 11:31:11AM -0500, Zhi Li wrote:
> On Fri, Sep 18, 2015 at 8:12 PM, Shawn Guo <shawnguo@kernel.org> wrote:
> > I have zero interest to maintain this pile of code in the mainline
> > kernel. Take it as a motivation to move to PSCI soon, or you maintain
> > it on your own as a out-of-tree patch for whatever long time you like.
> >
>
> Does it means that SMP support also need go through PSCI?
Yes, please.
Shawn
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v8 2/2] ARM: imx: support suspend states on imx7D
@ 2015-10-08 6:37 ` Shawn Guo
0 siblings, 0 replies; 36+ messages in thread
From: Shawn Guo @ 2015-10-08 6:37 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 01, 2015 at 11:31:11AM -0500, Zhi Li wrote:
> On Fri, Sep 18, 2015 at 8:12 PM, Shawn Guo <shawnguo@kernel.org> wrote:
> > I have zero interest to maintain this pile of code in the mainline
> > kernel. Take it as a motivation to move to PSCI soon, or you maintain
> > it on your own as a out-of-tree patch for whatever long time you like.
> >
>
> Does it means that SMP support also need go through PSCI?
Yes, please.
Shawn
^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2015-10-08 6:37 UTC | newest]
Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-31 21:33 [PATCH v8 0/2] IMX GPCv2 drivers for wakeup source and suspend Shenwei Wang
2015-07-31 21:33 ` Shenwei Wang
2015-07-31 21:33 ` [PATCH v8 1/2] irqchip: imx-gpcv2: IMX GPCv2 driver for wakeup sources Shenwei Wang
2015-07-31 21:33 ` Shenwei Wang
2015-08-21 13:45 ` Shenwei Wang
2015-08-21 13:45 ` Shenwei Wang
2015-08-23 10:57 ` Thomas Gleixner
2015-08-23 10:57 ` Thomas Gleixner
2015-08-24 16:09 ` Shenwei Wang
2015-08-24 16:09 ` Shenwei Wang
2015-08-24 17:37 ` Thomas Gleixner
2015-08-24 17:37 ` Thomas Gleixner
2015-08-24 18:25 ` Shenwei Wang
2015-08-24 18:25 ` Shenwei Wang
2015-08-24 18:31 ` Thomas Gleixner
2015-08-24 18:31 ` Thomas Gleixner
2015-07-31 21:33 ` [PATCH v8 2/2] ARM: imx: support suspend states on imx7D Shenwei Wang
2015-07-31 21:33 ` Shenwei Wang
2015-08-21 13:45 ` Shenwei Wang
2015-08-21 13:45 ` Shenwei Wang
2015-09-03 20:41 ` Shenwei Wang
2015-09-03 20:41 ` Shenwei Wang
2015-09-07 15:11 ` Shawn Guo
2015-09-07 15:11 ` Shawn Guo
2015-09-08 15:01 ` Shenwei Wang
2015-09-08 15:01 ` Shenwei Wang
2015-09-18 14:15 ` Shawn Guo
2015-09-18 14:15 ` Shawn Guo
2015-09-18 14:38 ` Shenwei Wang
2015-09-18 14:38 ` Shenwei Wang
2015-09-19 1:12 ` Shawn Guo
2015-09-19 1:12 ` Shawn Guo
2015-10-01 16:31 ` Zhi Li
2015-10-01 16:31 ` Zhi Li
2015-10-08 6:37 ` Shawn Guo
2015-10-08 6:37 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.