All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-21 23:57 ` saeed.mirzamohammadi
  0 siblings, 0 replies; 22+ messages in thread
From: saeed.mirzamohammadi @ 2020-10-21 23:57 UTC (permalink / raw)
  To: linux-kernel
  Cc: b.zolnierkie, akpm, rppt, daniel.vetter, jani.nikula, gustavoars,
	dri-devel, linux-fbdev

From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>

This patch fixes the issue due to:

[   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
[   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
[   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260

The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
A bits_per_pixel set to zero causes divide by zero error.

This patch moves the calculation after the sanity check.

Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
---
 drivers/video/fbdev/cirrusfb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
index 15a9ee7cd734..a7749101b094 100644
--- a/drivers/video/fbdev/cirrusfb.c
+++ b/drivers/video/fbdev/cirrusfb.c
@@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 {
 	int yres;
 	/* memory size in pixels */
-	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
+	unsigned int pixels;
 	struct cirrusfb_info *cinfo = info->par;
 
 	switch (var->bits_per_pixel) {
@@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
+	pixels = info->screen_size * 8 / var->bits_per_pixel;
 	if (var->xres_virtual < var->xres)
 		var->xres_virtual = var->xres;
 	/* use highest possible virtual resolution */
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-21 23:57 ` saeed.mirzamohammadi
  0 siblings, 0 replies; 22+ messages in thread
From: saeed.mirzamohammadi @ 2020-10-21 23:57 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	gustavoars, dri-devel, akpm, rppt

From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>

This patch fixes the issue due to:

[   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
[   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
[   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260

The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
A bits_per_pixel set to zero causes divide by zero error.

This patch moves the calculation after the sanity check.

Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
---
 drivers/video/fbdev/cirrusfb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
index 15a9ee7cd734..a7749101b094 100644
--- a/drivers/video/fbdev/cirrusfb.c
+++ b/drivers/video/fbdev/cirrusfb.c
@@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 {
 	int yres;
 	/* memory size in pixels */
-	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
+	unsigned int pixels;
 	struct cirrusfb_info *cinfo = info->par;
 
 	switch (var->bits_per_pixel) {
@@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
+	pixels = info->screen_size * 8 / var->bits_per_pixel;
 	if (var->xres_virtual < var->xres)
 		var->xres_virtual = var->xres;
 	/* use highest possible virtual resolution */
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-21 23:57 ` saeed.mirzamohammadi
@ 2020-10-22  0:33   ` Saeed Mirzamohammadi
  -1 siblings, 0 replies; 22+ messages in thread
From: Saeed Mirzamohammadi @ 2020-10-22  0:33 UTC (permalink / raw)
  To: linux-kernel
  Cc: b.zolnierkie, akpm, rppt, daniel.vetter, jani.nikula, gustavoars,
	dri-devel, linux-fbdev

[-- Attachment #1: Type: text/plain, Size: 38 bytes --]

Attached the Syzkaller C reproducer.


[-- Attachment #2: repro.c --]
[-- Type: application/octet-stream, Size: 8761 bytes --]

#define _GNU_SOURCE

#include <dirent.h>
#include <endian.h>
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <stdarg.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/prctl.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <time.h>
#include <unistd.h>

#include <linux/futex.h>

static void sleep_ms(uint64_t ms)
{
    usleep(ms * 1000);
}

static uint64_t current_time_ms(void)
{
    struct timespec ts;
    if (clock_gettime(CLOCK_MONOTONIC, &ts))
    exit(1);
    return (uint64_t)ts.tv_sec * 1000 + (uint64_t)ts.tv_nsec / 1000000;
}

static void thread_start(void* (*fn)(void*), void* arg)
{
    pthread_t th;
    pthread_attr_t attr;
    pthread_attr_init(&attr);
    pthread_attr_setstacksize(&attr, 128 << 10);
    int i;
    for (i = 0; i < 100; i++) {
        if (pthread_create(&th, &attr, fn, arg) == 0) {
            pthread_attr_destroy(&attr);
            return;
        }
        if (errno == EAGAIN) {
            usleep(50);
            continue;
        }
        break;
    }
    exit(1);
}

typedef struct {
    int state;
} event_t;

static void event_init(event_t* ev)
{
    ev->state = 0;
}

static void event_reset(event_t* ev)
{
    ev->state = 0;
}

static void event_set(event_t* ev)
{
    if (ev->state)
    exit(1);
    __atomic_store_n(&ev->state, 1, __ATOMIC_RELEASE);
    syscall(SYS_futex, &ev->state, FUTEX_WAKE | FUTEX_PRIVATE_FLAG, 1000000);
}

static void event_wait(event_t* ev)
{
    while (!__atomic_load_n(&ev->state, __ATOMIC_ACQUIRE))
        syscall(SYS_futex, &ev->state, FUTEX_WAIT | FUTEX_PRIVATE_FLAG, 0,
0);
}

static int event_isset(event_t* ev)
{
    return __atomic_load_n(&ev->state, __ATOMIC_ACQUIRE);
}

static int event_timedwait(event_t* ev, uint64_t timeout)
{
    uint64_t start = current_time_ms();
    uint64_t now = start;
    for (;;) {
        uint64_t remain = timeout - (now - start);
        struct timespec ts;
        ts.tv_sec = remain / 1000;
        ts.tv_nsec = (remain % 1000) * 1000 * 1000;
        syscall(SYS_futex, &ev->state, FUTEX_WAIT | FUTEX_PRIVATE_FLAG, 0,
&ts);
        if (__atomic_load_n(&ev->state, __ATOMIC_RELAXED))
            return 1;
        now = current_time_ms();
        if (now - start > timeout)
            return 0;
    }
}

static bool write_file(const char* file, const char* what, ...)
{
    char buf[1024];
    va_list args;
    va_start(args, what);
    vsnprintf(buf, sizeof(buf), what, args);
    va_end(args);
    buf[sizeof(buf) - 1] = 0;
    int len = strlen(buf);
    int fd = open(file, O_WRONLY | O_CLOEXEC);
    if (fd == -1)
        return false;
    if (write(fd, buf, len) != len) {
        int err = errno;
        close(fd);
        errno = err;
        return false;
    }
    close(fd);
    return true;
}

static long syz_open_dev(volatile long a0, volatile long a1, volatile long
a2)
{
    if (a0 == 0xc || a0 == 0xb) {
        char buf[128];
        sprintf(buf, "/dev/%s/%d:%d", a0 == 0xc ? "char" : "block",
(uint8_t)a1, (uint8_t)a2);
        return open(buf, O_RDWR, 0);
    } else {
        char buf[1024];
        char* hash;
strncpy(buf, (char*)a0, sizeof(buf) - 1);
        buf[sizeof(buf) - 1] = 0;
        while ((hash = strchr(buf, '#'))) {
            *hash = '0' + (char)(a1 % 10);
            a1 /= 10;
        }
        return open(buf, a2, 0);
    }
}

static void kill_and_wait(int pid, int* status)
{
    kill(-pid, SIGKILL);
    kill(pid, SIGKILL);
    int i;
    for (i = 0; i < 100; i++) {
        if (waitpid(-1, status, WNOHANG | __WALL) == pid)
            return;
        usleep(1000);
    }
    DIR* dir = opendir("/sys/fs/fuse/connections");
    if (dir) {
        for (;;) {
            struct dirent* ent = readdir(dir);
            if (!ent)
                break;
            if (strcmp(ent->d_name, ".") == 0 || strcmp(ent->d_name, "..") ==
0)
                continue;
            char abort[300];
            snprintf(abort, sizeof(abort),
"/sys/fs/fuse/connections/%s/abort", ent->d_name);
            int fd = open(abort, O_WRONLY);
            if (fd == -1) {
                continue;
            }
            if (write(fd, abort, 1) < 0) {
            }
            close(fd);
        }
        closedir(dir);
    } else {
    }
    while (waitpid(-1, status, __WALL) != pid) {
    }
}

static void setup_test()
{
    prctl(PR_SET_PDEATHSIG, SIGKILL, 0, 0, 0);
    setpgrp();
    write_file("/proc/self/oom_score_adj", "1000");
}

struct thread_t {
    int created, call;
    event_t ready, done;
};

static struct thread_t threads[16];
static void execute_call(int call);
static int running;

static void* thr(void* arg)
{
    struct thread_t* th = (struct thread_t*)arg;
    for (;;) {
        event_wait(&th->ready);
        event_reset(&th->ready);
        execute_call(th->call);
        __atomic_fetch_sub(&running, 1, __ATOMIC_RELAXED);
        event_set(&th->done);
    }
    return 0;
}

static void execute_one(void)
{
    int i, call, thread;
    int collide = 0;
again:
    for (call = 0; call < 6; call++) {
        for (thread = 0; thread < (int)(sizeof(threads) /
sizeof(threads[0])); thread++) {
            struct thread_t* th = &threads[thread];
            if (!th->created) {
                th->created = 1;
                event_init(&th->ready);
                event_init(&th->done);
                event_set(&th->done);
                thread_start(thr, th);
            }
            if (!event_isset(&th->done))
                continue;
            event_reset(&th->done);
            th->call = call;
            __atomic_fetch_add(&running, 1, __ATOMIC_RELAXED);
            event_set(&th->ready);
            if (collide && (call % 2) == 0)
                break;
            event_timedwait(&th->done, 45);
            break;
        }
    }
    for (i = 0; i < 100 && __atomic_load_n(&running, __ATOMIC_RELAXED); i++)
        sleep_ms(1);
    if (!collide) {
        collide = 1;
        goto again;
    }
}

static void execute_one(void);

#define WAIT_FLAGS __WALL

static void loop(void)
{
    int iter;
    for (iter = 0;; iter++) {
        int pid = fork();
        if (pid < 0)
    exit(1);
        if (pid == 0) {
            setup_test();
            execute_one();
            exit(0);
        }
        int status = 0;
        uint64_t start = current_time_ms();
        for (;;) {
            if (waitpid(-1, &status, WNOHANG | WAIT_FLAGS) == pid)
                break;
            sleep_ms(1);
            if (current_time_ms() - start < 5 * 1000)
                continue;
            kill_and_wait(pid, &status);
            break;
        }
    }
}

uint64_t r[2] = {0xffffffffffffffff, 0xffffffffffffffff};

void execute_call(int call)
{
        intptr_t res;    switch (call) {
    case 0:
memcpy((void*)0x20000000, "/dev/fb0\000", 9);
        res = syscall(__NR_openat, 0xffffffffffffff9cul, 0x20000000ul, 0ul,
0ul);
        if (res != -1)
                r[0] = res;
        break;
    case 1:
*(uint32_t*)0x20000100 = 0;
*(uint32_t*)0x20000104 = 0x10;
*(uint32_t*)0x20000108 = 0;
*(uint32_t*)0x2000010c = 0;
*(uint32_t*)0x20000110 = 0;
*(uint32_t*)0x20000114 = 0;
*(uint32_t*)0x20000118 = 0;
*(uint32_t*)0x2000011c = 0;
*(uint32_t*)0x20000120 = 0;
*(uint32_t*)0x20000124 = 0;
*(uint32_t*)0x20000128 = 0;
*(uint32_t*)0x2000012c = 0;
*(uint32_t*)0x20000130 = 0;
*(uint32_t*)0x20000134 = 0;
*(uint32_t*)0x20000138 = 0;
*(uint32_t*)0x2000013c = 0;
*(uint32_t*)0x20000140 = 0;
*(uint32_t*)0x20000144 = 0;
*(uint32_t*)0x20000148 = 0;
*(uint32_t*)0x2000014c = 0;
*(uint32_t*)0x20000150 = 0;
*(uint32_t*)0x20000154 = 0;
*(uint32_t*)0x20000158 = 0;
*(uint32_t*)0x2000015c = 0;
*(uint32_t*)0x20000160 = 0;
*(uint32_t*)0x20000164 = 0;
*(uint32_t*)0x20000168 = 0;
*(uint32_t*)0x2000016c = 0;
*(uint32_t*)0x20000170 = 0;
*(uint32_t*)0x20000174 = 0;
*(uint32_t*)0x20000178 = 0;
*(uint32_t*)0x2000017c = 0;
*(uint32_t*)0x20000180 = 0;
*(uint32_t*)0x20000184 = 0;
*(uint32_t*)0x20000188 = 0;
*(uint32_t*)0x2000018c = 0;
*(uint32_t*)0x20000190 = 0;
*(uint32_t*)0x20000194 = 0;
*(uint32_t*)0x20000198 = 0;
*(uint32_t*)0x2000019c = 0;
        syscall(__NR_ioctl, r[0], 0x4601ul, 0x20000100ul);
        break;
    case 2:
        syscall(__NR_socket, 0xaul, 3ul, 0x3aul);
        break;
    case 3:
        res = syz_open_dev(0xc, 4, 0x14);
        if (res != -1)
                r[1] = res;
        break;
    case 4:
        syscall(__NR_ioctl, r[1], 0x5437ul, 0ul);
        break;
    case 5:
        syscall(__NR_ioctl, r[1], 0x5606ul, 8ul);
        break;
    }

}
int main(void)
{
        syscall(__NR_mmap, 0x20000000ul, 0x1000000ul, 3ul, 0x32ul, -1, 0);
            loop();
    return 0;
}


[-- Attachment #3: Type: text/plain, Size: 1838 bytes --]



> On Oct 21, 2020, at 4:57 PM, saeed.mirzamohammadi@oracle.com wrote:
> 
> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> 
> This patch fixes the issue due to:
> 
> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
> 
> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
> A bits_per_pixel set to zero causes divide by zero error.
> 
> This patch moves the calculation after the sanity check.
> 
> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> ---
> drivers/video/fbdev/cirrusfb.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
> index 15a9ee7cd734..a7749101b094 100644
> --- a/drivers/video/fbdev/cirrusfb.c
> +++ b/drivers/video/fbdev/cirrusfb.c
> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
> {
> 	int yres;
> 	/* memory size in pixels */
> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
> +	unsigned int pixels;
> 	struct cirrusfb_info *cinfo = info->par;
> 
> 	switch (var->bits_per_pixel) {
> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
> 		return -EINVAL;
> 	}
> 
> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
> 	if (var->xres_virtual < var->xres)
> 		var->xres_virtual = var->xres;
> 	/* use highest possible virtual resolution */
> -- 
> 2.27.0
> 


^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-22  0:33   ` Saeed Mirzamohammadi
  0 siblings, 0 replies; 22+ messages in thread
From: Saeed Mirzamohammadi @ 2020-10-22  0:33 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	gustavoars, dri-devel, akpm, rppt

[-- Attachment #1: Type: text/plain, Size: 38 bytes --]

Attached the Syzkaller C reproducer.


[-- Attachment #2: repro.c --]
[-- Type: application/octet-stream, Size: 8761 bytes --]

#define _GNU_SOURCE

#include <dirent.h>
#include <endian.h>
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <stdarg.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/prctl.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <time.h>
#include <unistd.h>

#include <linux/futex.h>

static void sleep_ms(uint64_t ms)
{
    usleep(ms * 1000);
}

static uint64_t current_time_ms(void)
{
    struct timespec ts;
    if (clock_gettime(CLOCK_MONOTONIC, &ts))
    exit(1);
    return (uint64_t)ts.tv_sec * 1000 + (uint64_t)ts.tv_nsec / 1000000;
}

static void thread_start(void* (*fn)(void*), void* arg)
{
    pthread_t th;
    pthread_attr_t attr;
    pthread_attr_init(&attr);
    pthread_attr_setstacksize(&attr, 128 << 10);
    int i;
    for (i = 0; i < 100; i++) {
        if (pthread_create(&th, &attr, fn, arg) == 0) {
            pthread_attr_destroy(&attr);
            return;
        }
        if (errno == EAGAIN) {
            usleep(50);
            continue;
        }
        break;
    }
    exit(1);
}

typedef struct {
    int state;
} event_t;

static void event_init(event_t* ev)
{
    ev->state = 0;
}

static void event_reset(event_t* ev)
{
    ev->state = 0;
}

static void event_set(event_t* ev)
{
    if (ev->state)
    exit(1);
    __atomic_store_n(&ev->state, 1, __ATOMIC_RELEASE);
    syscall(SYS_futex, &ev->state, FUTEX_WAKE | FUTEX_PRIVATE_FLAG, 1000000);
}

static void event_wait(event_t* ev)
{
    while (!__atomic_load_n(&ev->state, __ATOMIC_ACQUIRE))
        syscall(SYS_futex, &ev->state, FUTEX_WAIT | FUTEX_PRIVATE_FLAG, 0,
0);
}

static int event_isset(event_t* ev)
{
    return __atomic_load_n(&ev->state, __ATOMIC_ACQUIRE);
}

static int event_timedwait(event_t* ev, uint64_t timeout)
{
    uint64_t start = current_time_ms();
    uint64_t now = start;
    for (;;) {
        uint64_t remain = timeout - (now - start);
        struct timespec ts;
        ts.tv_sec = remain / 1000;
        ts.tv_nsec = (remain % 1000) * 1000 * 1000;
        syscall(SYS_futex, &ev->state, FUTEX_WAIT | FUTEX_PRIVATE_FLAG, 0,
&ts);
        if (__atomic_load_n(&ev->state, __ATOMIC_RELAXED))
            return 1;
        now = current_time_ms();
        if (now - start > timeout)
            return 0;
    }
}

static bool write_file(const char* file, const char* what, ...)
{
    char buf[1024];
    va_list args;
    va_start(args, what);
    vsnprintf(buf, sizeof(buf), what, args);
    va_end(args);
    buf[sizeof(buf) - 1] = 0;
    int len = strlen(buf);
    int fd = open(file, O_WRONLY | O_CLOEXEC);
    if (fd == -1)
        return false;
    if (write(fd, buf, len) != len) {
        int err = errno;
        close(fd);
        errno = err;
        return false;
    }
    close(fd);
    return true;
}

static long syz_open_dev(volatile long a0, volatile long a1, volatile long
a2)
{
    if (a0 == 0xc || a0 == 0xb) {
        char buf[128];
        sprintf(buf, "/dev/%s/%d:%d", a0 == 0xc ? "char" : "block",
(uint8_t)a1, (uint8_t)a2);
        return open(buf, O_RDWR, 0);
    } else {
        char buf[1024];
        char* hash;
strncpy(buf, (char*)a0, sizeof(buf) - 1);
        buf[sizeof(buf) - 1] = 0;
        while ((hash = strchr(buf, '#'))) {
            *hash = '0' + (char)(a1 % 10);
            a1 /= 10;
        }
        return open(buf, a2, 0);
    }
}

static void kill_and_wait(int pid, int* status)
{
    kill(-pid, SIGKILL);
    kill(pid, SIGKILL);
    int i;
    for (i = 0; i < 100; i++) {
        if (waitpid(-1, status, WNOHANG | __WALL) == pid)
            return;
        usleep(1000);
    }
    DIR* dir = opendir("/sys/fs/fuse/connections");
    if (dir) {
        for (;;) {
            struct dirent* ent = readdir(dir);
            if (!ent)
                break;
            if (strcmp(ent->d_name, ".") == 0 || strcmp(ent->d_name, "..") ==
0)
                continue;
            char abort[300];
            snprintf(abort, sizeof(abort),
"/sys/fs/fuse/connections/%s/abort", ent->d_name);
            int fd = open(abort, O_WRONLY);
            if (fd == -1) {
                continue;
            }
            if (write(fd, abort, 1) < 0) {
            }
            close(fd);
        }
        closedir(dir);
    } else {
    }
    while (waitpid(-1, status, __WALL) != pid) {
    }
}

static void setup_test()
{
    prctl(PR_SET_PDEATHSIG, SIGKILL, 0, 0, 0);
    setpgrp();
    write_file("/proc/self/oom_score_adj", "1000");
}

struct thread_t {
    int created, call;
    event_t ready, done;
};

static struct thread_t threads[16];
static void execute_call(int call);
static int running;

static void* thr(void* arg)
{
    struct thread_t* th = (struct thread_t*)arg;
    for (;;) {
        event_wait(&th->ready);
        event_reset(&th->ready);
        execute_call(th->call);
        __atomic_fetch_sub(&running, 1, __ATOMIC_RELAXED);
        event_set(&th->done);
    }
    return 0;
}

static void execute_one(void)
{
    int i, call, thread;
    int collide = 0;
again:
    for (call = 0; call < 6; call++) {
        for (thread = 0; thread < (int)(sizeof(threads) /
sizeof(threads[0])); thread++) {
            struct thread_t* th = &threads[thread];
            if (!th->created) {
                th->created = 1;
                event_init(&th->ready);
                event_init(&th->done);
                event_set(&th->done);
                thread_start(thr, th);
            }
            if (!event_isset(&th->done))
                continue;
            event_reset(&th->done);
            th->call = call;
            __atomic_fetch_add(&running, 1, __ATOMIC_RELAXED);
            event_set(&th->ready);
            if (collide && (call % 2) == 0)
                break;
            event_timedwait(&th->done, 45);
            break;
        }
    }
    for (i = 0; i < 100 && __atomic_load_n(&running, __ATOMIC_RELAXED); i++)
        sleep_ms(1);
    if (!collide) {
        collide = 1;
        goto again;
    }
}

static void execute_one(void);

#define WAIT_FLAGS __WALL

static void loop(void)
{
    int iter;
    for (iter = 0;; iter++) {
        int pid = fork();
        if (pid < 0)
    exit(1);
        if (pid == 0) {
            setup_test();
            execute_one();
            exit(0);
        }
        int status = 0;
        uint64_t start = current_time_ms();
        for (;;) {
            if (waitpid(-1, &status, WNOHANG | WAIT_FLAGS) == pid)
                break;
            sleep_ms(1);
            if (current_time_ms() - start < 5 * 1000)
                continue;
            kill_and_wait(pid, &status);
            break;
        }
    }
}

uint64_t r[2] = {0xffffffffffffffff, 0xffffffffffffffff};

void execute_call(int call)
{
        intptr_t res;    switch (call) {
    case 0:
memcpy((void*)0x20000000, "/dev/fb0\000", 9);
        res = syscall(__NR_openat, 0xffffffffffffff9cul, 0x20000000ul, 0ul,
0ul);
        if (res != -1)
                r[0] = res;
        break;
    case 1:
*(uint32_t*)0x20000100 = 0;
*(uint32_t*)0x20000104 = 0x10;
*(uint32_t*)0x20000108 = 0;
*(uint32_t*)0x2000010c = 0;
*(uint32_t*)0x20000110 = 0;
*(uint32_t*)0x20000114 = 0;
*(uint32_t*)0x20000118 = 0;
*(uint32_t*)0x2000011c = 0;
*(uint32_t*)0x20000120 = 0;
*(uint32_t*)0x20000124 = 0;
*(uint32_t*)0x20000128 = 0;
*(uint32_t*)0x2000012c = 0;
*(uint32_t*)0x20000130 = 0;
*(uint32_t*)0x20000134 = 0;
*(uint32_t*)0x20000138 = 0;
*(uint32_t*)0x2000013c = 0;
*(uint32_t*)0x20000140 = 0;
*(uint32_t*)0x20000144 = 0;
*(uint32_t*)0x20000148 = 0;
*(uint32_t*)0x2000014c = 0;
*(uint32_t*)0x20000150 = 0;
*(uint32_t*)0x20000154 = 0;
*(uint32_t*)0x20000158 = 0;
*(uint32_t*)0x2000015c = 0;
*(uint32_t*)0x20000160 = 0;
*(uint32_t*)0x20000164 = 0;
*(uint32_t*)0x20000168 = 0;
*(uint32_t*)0x2000016c = 0;
*(uint32_t*)0x20000170 = 0;
*(uint32_t*)0x20000174 = 0;
*(uint32_t*)0x20000178 = 0;
*(uint32_t*)0x2000017c = 0;
*(uint32_t*)0x20000180 = 0;
*(uint32_t*)0x20000184 = 0;
*(uint32_t*)0x20000188 = 0;
*(uint32_t*)0x2000018c = 0;
*(uint32_t*)0x20000190 = 0;
*(uint32_t*)0x20000194 = 0;
*(uint32_t*)0x20000198 = 0;
*(uint32_t*)0x2000019c = 0;
        syscall(__NR_ioctl, r[0], 0x4601ul, 0x20000100ul);
        break;
    case 2:
        syscall(__NR_socket, 0xaul, 3ul, 0x3aul);
        break;
    case 3:
        res = syz_open_dev(0xc, 4, 0x14);
        if (res != -1)
                r[1] = res;
        break;
    case 4:
        syscall(__NR_ioctl, r[1], 0x5437ul, 0ul);
        break;
    case 5:
        syscall(__NR_ioctl, r[1], 0x5606ul, 8ul);
        break;
    }

}
int main(void)
{
        syscall(__NR_mmap, 0x20000000ul, 0x1000000ul, 3ul, 0x32ul, -1, 0);
            loop();
    return 0;
}


[-- Attachment #3: Type: text/plain, Size: 1838 bytes --]



> On Oct 21, 2020, at 4:57 PM, saeed.mirzamohammadi@oracle.com wrote:
> 
> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> 
> This patch fixes the issue due to:
> 
> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
> 
> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
> A bits_per_pixel set to zero causes divide by zero error.
> 
> This patch moves the calculation after the sanity check.
> 
> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> ---
> drivers/video/fbdev/cirrusfb.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
> index 15a9ee7cd734..a7749101b094 100644
> --- a/drivers/video/fbdev/cirrusfb.c
> +++ b/drivers/video/fbdev/cirrusfb.c
> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
> {
> 	int yres;
> 	/* memory size in pixels */
> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
> +	unsigned int pixels;
> 	struct cirrusfb_info *cinfo = info->par;
> 
> 	switch (var->bits_per_pixel) {
> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
> 		return -EINVAL;
> 	}
> 
> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
> 	if (var->xres_virtual < var->xres)
> 		var->xres_virtual = var->xres;
> 	/* use highest possible virtual resolution */
> -- 
> 2.27.0
> 


[-- Attachment #4: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-21 23:57 ` saeed.mirzamohammadi
@ 2020-10-22  7:28   ` Thomas Zimmermann
  -1 siblings, 0 replies; 22+ messages in thread
From: Thomas Zimmermann @ 2020-10-22  7:28 UTC (permalink / raw)
  To: saeed.mirzamohammadi, linux-kernel
  Cc: b.zolnierkie, akpm, rppt, daniel.vetter, jani.nikula, gustavoars,
	dri-devel, linux-fbdev

Hi

On 22.10.20 01:57, saeed.mirzamohammadi@oracle.com wrote:
> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> 
> This patch fixes the issue due to:
> 
> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
> 
> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
> A bits_per_pixel set to zero causes divide by zero error.
> 
> This patch moves the calculation after the sanity check.
> 
> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>

Looks good, thanks a lot. I'll add the patch to drm-misc-next

Reviewed-by: Thomas Zimemrmann <tzimmermann@suse.de>

Best regards
Thomas

> ---
>  drivers/video/fbdev/cirrusfb.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
> index 15a9ee7cd734..a7749101b094 100644
> --- a/drivers/video/fbdev/cirrusfb.c
> +++ b/drivers/video/fbdev/cirrusfb.c
> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>  {
>  	int yres;
>  	/* memory size in pixels */
> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
> +	unsigned int pixels;
>  	struct cirrusfb_info *cinfo = info->par;
>  
>  	switch (var->bits_per_pixel) {
> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>  		return -EINVAL;
>  	}
>  
> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
>  	if (var->xres_virtual < var->xres)
>  		var->xres_virtual = var->xres;
>  	/* use highest possible virtual resolution */
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-22  7:28   ` Thomas Zimmermann
  0 siblings, 0 replies; 22+ messages in thread
From: Thomas Zimmermann @ 2020-10-22  7:28 UTC (permalink / raw)
  To: saeed.mirzamohammadi, linux-kernel
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	gustavoars, dri-devel, akpm, rppt

Hi

On 22.10.20 01:57, saeed.mirzamohammadi@oracle.com wrote:
> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> 
> This patch fixes the issue due to:
> 
> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
> 
> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
> A bits_per_pixel set to zero causes divide by zero error.
> 
> This patch moves the calculation after the sanity check.
> 
> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>

Looks good, thanks a lot. I'll add the patch to drm-misc-next

Reviewed-by: Thomas Zimemrmann <tzimmermann@suse.de>

Best regards
Thomas

> ---
>  drivers/video/fbdev/cirrusfb.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
> index 15a9ee7cd734..a7749101b094 100644
> --- a/drivers/video/fbdev/cirrusfb.c
> +++ b/drivers/video/fbdev/cirrusfb.c
> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>  {
>  	int yres;
>  	/* memory size in pixels */
> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
> +	unsigned int pixels;
>  	struct cirrusfb_info *cinfo = info->par;
>  
>  	switch (var->bits_per_pixel) {
> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>  		return -EINVAL;
>  	}
>  
> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
>  	if (var->xres_virtual < var->xres)
>  		var->xres_virtual = var->xres;
>  	/* use highest possible virtual resolution */
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-21 23:57 ` saeed.mirzamohammadi
@ 2020-10-22  7:34   ` Thomas Zimmermann
  -1 siblings, 0 replies; 22+ messages in thread
From: Thomas Zimmermann @ 2020-10-22  7:34 UTC (permalink / raw)
  To: saeed.mirzamohammadi, linux-kernel
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	gustavoars, dri-devel, akpm, rppt

Hi

On 22.10.20 01:57, saeed.mirzamohammadi@oracle.com wrote:
> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> 
> This patch fixes the issue due to:
> 
> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260

BTW, if you run qemu with cirrus, there's also a DRM driver named
cirrus.ko. Might be a better choice than the old fbdev driver. If you
just care about qemu, but not the actual graphics device, take a look at

  https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/

Anyway, thanks for your patch.

Best regards
Thomas

> 
> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
> A bits_per_pixel set to zero causes divide by zero error.
> 
> This patch moves the calculation after the sanity check.
> 
> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> ---
>  drivers/video/fbdev/cirrusfb.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
> index 15a9ee7cd734..a7749101b094 100644
> --- a/drivers/video/fbdev/cirrusfb.c
> +++ b/drivers/video/fbdev/cirrusfb.c
> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>  {
>  	int yres;
>  	/* memory size in pixels */
> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
> +	unsigned int pixels;
>  	struct cirrusfb_info *cinfo = info->par;
>  
>  	switch (var->bits_per_pixel) {
> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>  		return -EINVAL;
>  	}
>  
> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
>  	if (var->xres_virtual < var->xres)
>  		var->xres_virtual = var->xres;
>  	/* use highest possible virtual resolution */
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-22  7:34   ` Thomas Zimmermann
  0 siblings, 0 replies; 22+ messages in thread
From: Thomas Zimmermann @ 2020-10-22  7:34 UTC (permalink / raw)
  To: saeed.mirzamohammadi, linux-kernel
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	gustavoars, dri-devel, akpm, rppt

Hi

On 22.10.20 01:57, saeed.mirzamohammadi@oracle.com wrote:
> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> 
> This patch fixes the issue due to:
> 
> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260

BTW, if you run qemu with cirrus, there's also a DRM driver named
cirrus.ko. Might be a better choice than the old fbdev driver. If you
just care about qemu, but not the actual graphics device, take a look at

  https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/

Anyway, thanks for your patch.

Best regards
Thomas

> 
> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
> A bits_per_pixel set to zero causes divide by zero error.
> 
> This patch moves the calculation after the sanity check.
> 
> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> ---
>  drivers/video/fbdev/cirrusfb.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
> index 15a9ee7cd734..a7749101b094 100644
> --- a/drivers/video/fbdev/cirrusfb.c
> +++ b/drivers/video/fbdev/cirrusfb.c
> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>  {
>  	int yres;
>  	/* memory size in pixels */
> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
> +	unsigned int pixels;
>  	struct cirrusfb_info *cinfo = info->par;
>  
>  	switch (var->bits_per_pixel) {
> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>  		return -EINVAL;
>  	}
>  
> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
>  	if (var->xres_virtual < var->xres)
>  		var->xres_virtual = var->xres;
>  	/* use highest possible virtual resolution */
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-22  7:34   ` Thomas Zimmermann
  (?)
@ 2020-10-25 23:31   ` Saeed Mirzamohammadi
  -1 siblings, 0 replies; 22+ messages in thread
From: Saeed Mirzamohammadi @ 2020-10-25 23:31 UTC (permalink / raw)
  To: Thomas Zimmermann, stable
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	gustavoars, dri-devel, linux-kernel, akpm, rppt


[-- Attachment #1.1: Type: text/plain, Size: 2952 bytes --]

Thanks, adding stable.

> On Oct 22, 2020, at 12:34 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
> 
> Hi
> 
> On 22.10.20 01:57, saeed.mirzamohammadi@oracle.com <mailto:saeed.mirzamohammadi@oracle.com> wrote:
>> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com <mailto:saeed.mirzamohammadi@oracle.com>>
>> 
>> This patch fixes the issue due to:
>> 
>> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
>> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
>> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
>> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
> 
> BTW, if you run qemu with cirrus, there's also a DRM driver named
> cirrus.ko. Might be a better choice than the old fbdev driver. If you
> just care about qemu, but not the actual graphics device, take a look at
> 
>  https://urldefense.com/v3/__https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/__;!!GqivPVa7Brio!LmgeM-pVBVH80uVELF1P1nBGAbAlhvnxKKE_ZrEc9d76AznvAAgP1FAp3_zNa2frKaIUZteK$ <https://urldefense.com/v3/__https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/__;!!GqivPVa7Brio!LmgeM-pVBVH80uVELF1P1nBGAbAlhvnxKKE_ZrEc9d76AznvAAgP1FAp3_zNa2frKaIUZteK$> 
> 
> Anyway, thanks for your patch.
> 
> Best regards
> Thomas
> 
>> 
>> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
>> A bits_per_pixel set to zero causes divide by zero error.
>> 
>> This patch moves the calculation after the sanity check.
>> 
>> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> ---
>> drivers/video/fbdev/cirrusfb.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
>> index 15a9ee7cd734..a7749101b094 100644
>> --- a/drivers/video/fbdev/cirrusfb.c
>> +++ b/drivers/video/fbdev/cirrusfb.c
>> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>> {
>> 	int yres;
>> 	/* memory size in pixels */
>> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
>> +	unsigned int pixels;
>> 	struct cirrusfb_info *cinfo = info->par;
>> 
>> 	switch (var->bits_per_pixel) {
>> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>> 		return -EINVAL;
>> 	}
>> 
>> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
>> 	if (var->xres_virtual < var->xres)
>> 		var->xres_virtual = var->xres;
>> 	/* use highest possible virtual resolution */
>> 
> 
> -- 
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Felix Imendörffer


[-- Attachment #1.2: Type: text/html, Size: 20728 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-22  7:34   ` Thomas Zimmermann
@ 2020-10-26 17:00     ` Saeed Mirzamohammadi
  -1 siblings, 0 replies; 22+ messages in thread
From: Saeed Mirzamohammadi @ 2020-10-26 17:00 UTC (permalink / raw)
  To: stable
  Cc: Thomas Zimmermann, linux-kernel, linux-fbdev, b.zolnierkie,
	jani.nikula, daniel.vetter, gustavoars, dri-devel, akpm, rppt

Thanks, adding stable.

Saeed

> On Oct 22, 2020, at 12:34 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
> 
> Hi
> 
> On 22.10.20 01:57, saeed.mirzamohammadi@oracle.com wrote:
>> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> 
>> This patch fixes the issue due to:
>> 
>> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
>> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
>> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
>> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
> 
> BTW, if you run qemu with cirrus, there's also a DRM driver named
> cirrus.ko. Might be a better choice than the old fbdev driver. If you
> just care about qemu, but not the actual graphics device, take a look at
> 
>  https://urldefense.com/v3/__https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/__;!!GqivPVa7Brio!LmgeM-pVBVH80uVELF1P1nBGAbAlhvnxKKE_ZrEc9d76AznvAAgP1FAp3_zNa2frKaIUZteK$ 
> 
> Anyway, thanks for your patch.
> 
> Best regards
> Thomas
> 
>> 
>> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
>> A bits_per_pixel set to zero causes divide by zero error.
>> 
>> This patch moves the calculation after the sanity check.
>> 
>> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> ---
>> drivers/video/fbdev/cirrusfb.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
>> index 15a9ee7cd734..a7749101b094 100644
>> --- a/drivers/video/fbdev/cirrusfb.c
>> +++ b/drivers/video/fbdev/cirrusfb.c
>> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>> {
>> 	int yres;
>> 	/* memory size in pixels */
>> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
>> +	unsigned int pixels;
>> 	struct cirrusfb_info *cinfo = info->par;
>> 
>> 	switch (var->bits_per_pixel) {
>> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>> 		return -EINVAL;
>> 	}
>> 
>> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
>> 	if (var->xres_virtual < var->xres)
>> 		var->xres_virtual = var->xres;
>> 	/* use highest possible virtual resolution */
>> 
> 
> -- 
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Felix Imendörffer


^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-26 17:00     ` Saeed Mirzamohammadi
  0 siblings, 0 replies; 22+ messages in thread
From: Saeed Mirzamohammadi @ 2020-10-26 17:00 UTC (permalink / raw)
  To: stable
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	linux-kernel, dri-devel, gustavoars, Thomas Zimmermann, akpm,
	rppt

Thanks, adding stable.

Saeed

> On Oct 22, 2020, at 12:34 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
> 
> Hi
> 
> On 22.10.20 01:57, saeed.mirzamohammadi@oracle.com wrote:
>> From: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> 
>> This patch fixes the issue due to:
>> 
>> [   89.572883] divide_error: 0000 [#1] SMP KASAN PTI
>> [   89.572897] CPU: 3 PID: 16083 Comm: repro Not tainted 5.9.0-rc7.20200930.rc1.allarch-19-g3e32d0d.syzk #5
>> [   89.572902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
>> [   89.572934] RIP: 0010:cirrusfb_check_var+0x84/0x1260
> 
> BTW, if you run qemu with cirrus, there's also a DRM driver named
> cirrus.ko. Might be a better choice than the old fbdev driver. If you
> just care about qemu, but not the actual graphics device, take a look at
> 
>  https://urldefense.com/v3/__https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/__;!!GqivPVa7Brio!LmgeM-pVBVH80uVELF1P1nBGAbAlhvnxKKE_ZrEc9d76AznvAAgP1FAp3_zNa2frKaIUZteK$ 
> 
> Anyway, thanks for your patch.
> 
> Best regards
> Thomas
> 
>> 
>> The error happens when the pixels value is calculated before performing the sanity checks on bits_per_pixel.
>> A bits_per_pixel set to zero causes divide by zero error.
>> 
>> This patch moves the calculation after the sanity check.
>> 
>> Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> ---
>> drivers/video/fbdev/cirrusfb.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
>> index 15a9ee7cd734..a7749101b094 100644
>> --- a/drivers/video/fbdev/cirrusfb.c
>> +++ b/drivers/video/fbdev/cirrusfb.c
>> @@ -531,7 +531,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>> {
>> 	int yres;
>> 	/* memory size in pixels */
>> -	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
>> +	unsigned int pixels;
>> 	struct cirrusfb_info *cinfo = info->par;
>> 
>> 	switch (var->bits_per_pixel) {
>> @@ -573,6 +573,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
>> 		return -EINVAL;
>> 	}
>> 
>> +	pixels = info->screen_size * 8 / var->bits_per_pixel;
>> 	if (var->xres_virtual < var->xres)
>> 		var->xres_virtual = var->xres;
>> 	/* use highest possible virtual resolution */
>> 
> 
> -- 
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Felix Imendörffer

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-26 17:00     ` Saeed Mirzamohammadi
@ 2020-10-27  6:22       ` Greg KH
  -1 siblings, 0 replies; 22+ messages in thread
From: Greg KH @ 2020-10-27  6:22 UTC (permalink / raw)
  To: Saeed Mirzamohammadi
  Cc: stable, Thomas Zimmermann, linux-kernel, linux-fbdev,
	b.zolnierkie, jani.nikula, daniel.vetter, gustavoars, dri-devel,
	akpm, rppt

On Mon, Oct 26, 2020 at 10:00:11AM -0700, Saeed Mirzamohammadi wrote:
> Thanks, adding stable.

Why?  What are we supposed to do with this?

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-27  6:22       ` Greg KH
  0 siblings, 0 replies; 22+ messages in thread
From: Greg KH @ 2020-10-27  6:22 UTC (permalink / raw)
  To: Saeed Mirzamohammadi
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	linux-kernel, stable, gustavoars, dri-devel, Thomas Zimmermann,
	akpm, rppt

On Mon, Oct 26, 2020 at 10:00:11AM -0700, Saeed Mirzamohammadi wrote:
> Thanks, adding stable.

Why?  What are we supposed to do with this?
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-27  6:22       ` Greg KH
  (?)
@ 2020-10-27 16:22       ` Saeed Mirzamohammadi
  -1 siblings, 0 replies; 22+ messages in thread
From: Saeed Mirzamohammadi @ 2020-10-27 16:22 UTC (permalink / raw)
  To: Greg KH
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	linux-kernel, stable, gustavoars, dri-devel, Thomas Zimmermann,
	akpm, rppt


[-- Attachment #1.1: Type: text/plain, Size: 508 bytes --]

Hi Greg,

Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8. I’ll be more explicit.
Commit: cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3 ("video: fbdev: fix divide error in fbcon_pswitch”)

Thanks,
Saeed

> On Oct 26, 2020, at 11:22 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
> 
> On Mon, Oct 26, 2020 at 10:00:11AM -0700, Saeed Mirzamohammadi wrote:
>> Thanks, adding stable.
> 
> Why?  What are we supposed to do with this?


[-- Attachment #1.2: Type: text/html, Size: 1691 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-27  6:22       ` Greg KH
  (?)
  (?)
@ 2020-10-27 16:33       ` Saeed Mirzamohammadi
  -1 siblings, 0 replies; 22+ messages in thread
From: Saeed Mirzamohammadi @ 2020-10-27 16:33 UTC (permalink / raw)
  To: Greg KH, stable
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	linux-kernel, dri-devel, gustavoars, Thomas Zimmermann, akpm,
	rppt


[-- Attachment #1.1: Type: text/plain, Size: 508 bytes --]

Hi Greg,

Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8. I’ll be more explicit.
Commit: cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3 ("video: fbdev: fix divide error in fbcon_pswitch”)

Thanks,
Saeed

> On Oct 26, 2020, at 11:22 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
> 
> On Mon, Oct 26, 2020 at 10:00:11AM -0700, Saeed Mirzamohammadi wrote:
>> Thanks, adding stable.
> 
> Why?  What are we supposed to do with this?


[-- Attachment #1.2: Type: text/html, Size: 1718 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-27  6:22       ` Greg KH
                         ` (2 preceding siblings ...)
  (?)
@ 2020-10-27 17:12       ` Saeed Mirzamohammadi
  2020-10-29 11:03           ` Greg KH
  -1 siblings, 1 reply; 22+ messages in thread
From: Saeed Mirzamohammadi @ 2020-10-27 17:12 UTC (permalink / raw)
  To: Greg KH
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	linux-kernel, stable, gustavoars, dri-devel, Thomas Zimmermann,
	akpm, rppt


[-- Attachment #1.1: Type: text/plain, Size: 588 bytes --]

Hi Greg,

Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8.
commit cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3
Author: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Date:   Wed Oct 21 16:57:58 2020 -0700

    video: fbdev: fix divide error in fbcon_switch

Thanks,
Saeed


> On Oct 26, 2020, at 11:22 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
> 
> On Mon, Oct 26, 2020 at 10:00:11AM -0700, Saeed Mirzamohammadi wrote:
>> Thanks, adding stable.
> 
> Why?  What are we supposed to do with this?


[-- Attachment #1.2: Type: text/html, Size: 2622 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-27 17:12       ` Saeed Mirzamohammadi
@ 2020-10-29 11:03           ` Greg KH
  0 siblings, 0 replies; 22+ messages in thread
From: Greg KH @ 2020-10-29 11:03 UTC (permalink / raw)
  To: Saeed Mirzamohammadi
  Cc: stable, Thomas Zimmermann, linux-kernel, linux-fbdev,
	b.zolnierkie, jani.nikula, daniel.vetter, gustavoars, dri-devel,
	akpm, rppt

On Tue, Oct 27, 2020 at 10:12:49AM -0700, Saeed Mirzamohammadi wrote:
> Hi Greg,
> 
> Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8.
> commit cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3
> Author: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> Date:   Wed Oct 21 16:57:58 2020 -0700
> 
>     video: fbdev: fix divide error in fbcon_switch

I do not see that commit in Linus's tree, do you?

confused,

greg k-h

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-29 11:03           ` Greg KH
  0 siblings, 0 replies; 22+ messages in thread
From: Greg KH @ 2020-10-29 11:03 UTC (permalink / raw)
  To: Saeed Mirzamohammadi
  Cc: linux-fbdev, b.zolnierkie, jani.nikula, daniel.vetter,
	linux-kernel, stable, gustavoars, dri-devel, Thomas Zimmermann,
	akpm, rppt

On Tue, Oct 27, 2020 at 10:12:49AM -0700, Saeed Mirzamohammadi wrote:
> Hi Greg,
> 
> Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8.
> commit cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3
> Author: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> Date:   Wed Oct 21 16:57:58 2020 -0700
> 
>     video: fbdev: fix divide error in fbcon_switch

I do not see that commit in Linus's tree, do you?

confused,

greg k-h
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-29 11:03           ` Greg KH
@ 2020-10-29 11:13             ` Jani Nikula
  -1 siblings, 0 replies; 22+ messages in thread
From: Jani Nikula @ 2020-10-29 11:13 UTC (permalink / raw)
  To: Greg KH, Saeed Mirzamohammadi
  Cc: linux-fbdev, b.zolnierkie, daniel.vetter, linux-kernel, stable,
	gustavoars, dri-devel, Thomas Zimmermann, akpm, rppt

On Thu, 29 Oct 2020, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Tue, Oct 27, 2020 at 10:12:49AM -0700, Saeed Mirzamohammadi wrote:
>> Hi Greg,
>> 
>> Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8.
>> commit cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3
>> Author: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> Date:   Wed Oct 21 16:57:58 2020 -0700
>> 
>>     video: fbdev: fix divide error in fbcon_switch
>
> I do not see that commit in Linus's tree, do you?

It's in drm-misc-next, IIUC heading for Linus' tree in the next merge
window in 6-8 weeks. Which is to say this should probably have been
applied to drm-misc-fixes branch heading for v5.10-rcX, with a Cc:
stable tag, to begin with.

BR,
Jani.


-- 
Jani Nikula, Intel Open Source Graphics Center

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-29 11:13             ` Jani Nikula
  0 siblings, 0 replies; 22+ messages in thread
From: Jani Nikula @ 2020-10-29 11:13 UTC (permalink / raw)
  To: Greg KH, Saeed Mirzamohammadi
  Cc: linux-fbdev, b.zolnierkie, daniel.vetter, gustavoars, stable,
	linux-kernel, dri-devel, Thomas Zimmermann, akpm, rppt

On Thu, 29 Oct 2020, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Tue, Oct 27, 2020 at 10:12:49AM -0700, Saeed Mirzamohammadi wrote:
>> Hi Greg,
>> 
>> Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8.
>> commit cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3
>> Author: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
>> Date:   Wed Oct 21 16:57:58 2020 -0700
>> 
>>     video: fbdev: fix divide error in fbcon_switch
>
> I do not see that commit in Linus's tree, do you?

It's in drm-misc-next, IIUC heading for Linus' tree in the next merge
window in 6-8 weeks. Which is to say this should probably have been
applied to drm-misc-fixes branch heading for v5.10-rcX, with a Cc:
stable tag, to begin with.

BR,
Jani.


-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
  2020-10-29 11:13             ` Jani Nikula
@ 2020-10-29 11:30               ` Greg KH
  -1 siblings, 0 replies; 22+ messages in thread
From: Greg KH @ 2020-10-29 11:30 UTC (permalink / raw)
  To: Jani Nikula
  Cc: Saeed Mirzamohammadi, linux-fbdev, b.zolnierkie, daniel.vetter,
	linux-kernel, stable, gustavoars, dri-devel, Thomas Zimmermann,
	akpm, rppt

On Thu, Oct 29, 2020 at 01:13:01PM +0200, Jani Nikula wrote:
> On Thu, 29 Oct 2020, Greg KH <gregkh@linuxfoundation.org> wrote:
> > On Tue, Oct 27, 2020 at 10:12:49AM -0700, Saeed Mirzamohammadi wrote:
> >> Hi Greg,
> >> 
> >> Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8.
> >> commit cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3
> >> Author: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> >> Date:   Wed Oct 21 16:57:58 2020 -0700
> >> 
> >>     video: fbdev: fix divide error in fbcon_switch
> >
> > I do not see that commit in Linus's tree, do you?
> 
> It's in drm-misc-next, IIUC heading for Linus' tree in the next merge
> window in 6-8 weeks. Which is to say this should probably have been
> applied to drm-misc-fixes branch heading for v5.10-rcX, with a Cc:
> stable tag, to begin with.

Ok, nothing I can do with this now, please email stable@vger.kernel.org
when it hits Linus's tree and we can take it then.

Saeed, please read:
    https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch
@ 2020-10-29 11:30               ` Greg KH
  0 siblings, 0 replies; 22+ messages in thread
From: Greg KH @ 2020-10-29 11:30 UTC (permalink / raw)
  To: Jani Nikula
  Cc: linux-fbdev, b.zolnierkie, Saeed Mirzamohammadi, daniel.vetter,
	linux-kernel, stable, gustavoars, dri-devel, Thomas Zimmermann,
	akpm, rppt

On Thu, Oct 29, 2020 at 01:13:01PM +0200, Jani Nikula wrote:
> On Thu, 29 Oct 2020, Greg KH <gregkh@linuxfoundation.org> wrote:
> > On Tue, Oct 27, 2020 at 10:12:49AM -0700, Saeed Mirzamohammadi wrote:
> >> Hi Greg,
> >> 
> >> Sorry for the confusion. I’m requesting stable maintainers to cherry-pick this patch into stable 5.4 and 5.8.
> >> commit cc07057c7c88fb8eff3b1991131ded0f0bcfa7e3
> >> Author: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
> >> Date:   Wed Oct 21 16:57:58 2020 -0700
> >> 
> >>     video: fbdev: fix divide error in fbcon_switch
> >
> > I do not see that commit in Linus's tree, do you?
> 
> It's in drm-misc-next, IIUC heading for Linus' tree in the next merge
> window in 6-8 weeks. Which is to say this should probably have been
> applied to drm-misc-fixes branch heading for v5.10-rcX, with a Cc:
> stable tag, to begin with.

Ok, nothing I can do with this now, please email stable@vger.kernel.org
when it hits Linus's tree and we can take it then.

Saeed, please read:
    https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

thanks,

greg k-h
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 22+ messages in thread
end of thread, other threads:[~2020-10-29 11:29 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-21 23:57 [PATCH 1/1] video: fbdev: fix divide error in fbcon_switch saeed.mirzamohammadi
2020-10-21 23:57 ` saeed.mirzamohammadi
2020-10-22  0:33 ` Saeed Mirzamohammadi
2020-10-22  0:33   ` Saeed Mirzamohammadi
2020-10-22  7:28 ` Thomas Zimmermann
2020-10-22  7:28   ` Thomas Zimmermann
2020-10-22  7:34 ` Thomas Zimmermann
2020-10-22  7:34   ` Thomas Zimmermann
2020-10-25 23:31   ` Saeed Mirzamohammadi
2020-10-26 17:00   ` Saeed Mirzamohammadi
2020-10-26 17:00     ` Saeed Mirzamohammadi
2020-10-27  6:22     ` Greg KH
2020-10-27  6:22       ` Greg KH
2020-10-27 16:22       ` Saeed Mirzamohammadi
2020-10-27 16:33       ` Saeed Mirzamohammadi
2020-10-27 17:12       ` Saeed Mirzamohammadi
2020-10-29 11:03         ` Greg KH
2020-10-29 11:03           ` Greg KH
2020-10-29 11:13           ` Jani Nikula
2020-10-29 11:13             ` Jani Nikula
2020-10-29 11:30             ` Greg KH
2020-10-29 11:30               ` Greg KH

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.