Need help for my Unraid cache drive

* Need help for my Unraid cache drive
@ 2021-01-30  5:22 Patrick Bihlmayer
  2021-02-04  3:16 ` Chris Murphy
  0 siblings, 1 reply; 3+ messages in thread
From: Patrick Bihlmayer @ 2021-01-30  5:22 UTC (permalink / raw)
  To: linux-btrfs

[-- Attachment #1: Type: text/plain, Size: 583 bytes --]

Hello together,

today i had an issue with my cache drive on my Unraid Server.
I used a 500GB SSD as cache drive.

Unfortunately i added another cache drive (wanted a separate drive for my VMs and accidentally added into the cache device pool)
After starting the array and all the setup for the cache device pool was done i stopped the array again.
I removed the second drive from my cache device pool again.

I started the array again - formatted the removed drive mounted it with unassigned devices.#
And then i realized the following error in my Unraid Cache Devices

[-- Attachment #2: PastedGraphic-1.png --]
[-- Type: image/png, Size: 32156 bytes --]

[-- Attachment #3: Type: text/plain, Size: 945 bytes --]

Unfortunately i cannot mount it again.
Can you please help me?

Thank you in advance
Best Regards
Patrick

Attached are the information requested.

root@JARVIS:/dev# uname -a
Linux JARVIS 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz GenuineIntel GNU/Linux

root@JARVIS:/dev# btrfs --version
btrfs-progs v5.4.1 

root@JARVIS:/dev# btrfs fi show
Label: none  uuid: a07d7790-4cb2-4dd6-b62c-c877c291ff7f
        Total devices 1 FS bytes used 384.00KiB
        devid    1 size 465.76GiB used 1.02GiB path /dev/nvme0n1p1

warning, device 2 is missing
bad tree block 1139295649792, bytenr mismatch, want=1139295649792, have=0
ERROR: cannot read chunk root
Label: none  uuid: 1df2cdfd-d2cb-498b-be96-13cb969e11f5
        Total devices 2 FS bytes used 77.57GiB
        devid    1 size 465.76GiB used 61.00GiB path /dev/sdb1
        *** Some devices missing

[-- Attachment #4: dmesg.log --]
[-- Type: application/octet-stream, Size: 70292 bytes --]

[    0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[    0.000000] Linux version 4.19.107-Unraid (root@Develop) (gcc version 9.2.0 (GCC)) #1 SMP Thu Mar 5 13:55:57 PST 2020
[    0.000000] Command line: BOOT_IMAGE=/bzimage initrd=/bzroot
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000315fafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000315fb000-0x00000000315fbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000315fc000-0x00000000315fcfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000315fd000-0x0000000038d00fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000038d01000-0x0000000039163fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000039164000-0x00000000392cefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000392cf000-0x0000000039687fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000039688000-0x0000000039ffefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000039fff000-0x0000000039ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003a000000-0x000000003f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008be7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z390 M GAMING/Z390 M GAMING-CF, BIOS F9e 12/02/2019
[    0.000000] tsc: Detected 3700.000 MHz processor
[    0.000766] tsc: Detected 3696.000 MHz TSC
[    0.000766] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000768] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000771] last_pfn = 0x8be800 max_arch_pfn = 0x400000000
[    0.000773] MTRR default type: write-back
[    0.000773] MTRR fixed ranges enabled:
[    0.000774]   00000-9FFFF write-back
[    0.000774]   A0000-BFFFF uncachable
[    0.000775]   C0000-FFFFF write-protect
[    0.000775] MTRR variable ranges enabled:
[    0.000776]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000776]   1 base 0040000000 mask 7FC0000000 uncachable
[    0.000777]   2 base 003C000000 mask 7FFC000000 uncachable
[    0.000777]   3 base 003B000000 mask 7FFF000000 uncachable
[    0.000777]   4 disabled
[    0.000778]   5 disabled
[    0.000778]   6 disabled
[    0.000778]   7 disabled
[    0.000778]   8 disabled
[    0.000779]   9 disabled
[    0.001336] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.001502] last_pfn = 0x3a000 max_arch_pfn = 0x400000000
[    0.005752] found SMP MP-table at [mem 0x000fcd50-0x000fcd5f]
[    0.005759] Using GB pages for direct mapping
[    0.005760] BRK [0x02401000, 0x02401fff] PGTABLE
[    0.005761] BRK [0x02402000, 0x02402fff] PGTABLE
[    0.005761] BRK [0x02403000, 0x02403fff] PGTABLE
[    0.005801] BRK [0x02404000, 0x02404fff] PGTABLE
[    0.006060] BRK [0x02405000, 0x02405fff] PGTABLE
[    0.006105] BRK [0x02406000, 0x02406fff] PGTABLE
[    0.006211] RAMDISK: [mem 0x29a3e000-0x315fafff]
[    0.006223] ACPI: Early table checksum verification disabled
[    0.006240] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.006242] ACPI: XSDT 0x00000000395EC0A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006246] ACPI: FACP 0x000000003962CD78 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.006248] ACPI: DSDT 0x00000000395EC200 040B73 (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.006250] ACPI: FACS 0x0000000039687080 000040
[    0.006251] ACPI: APIC 0x000000003962CE90 0000A0 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.006252] ACPI: FPDT 0x000000003962CF30 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006254] ACPI: FIDT 0x000000003962CF78 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006255] ACPI: MCFG 0x000000003962D018 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.006257] ACPI: SSDT 0x000000003962D058 000204 (v01 ALASKA A M I    00001000 INTL 20160527)
[    0.006258] ACPI: SSDT 0x000000003962D260 0017D5 (v02 ALASKA A M I    00003000 INTL 20160527)
[    0.006260] ACPI: SSDT 0x000000003962EA38 007C9A (v01 ALASKA A M I    00000001 INTL 20160527)
[    0.006261] ACPI: SSDT 0x00000000396366D8 0031C7 (v02 ALASKA A M I    00003000 INTL 20160527)
[    0.006263] ACPI: HPET 0x00000000396398A0 000038 (v01 ALASKA A M I    00000002      01000013)
[    0.006264] ACPI: SSDT 0x00000000396398D8 000F9E (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006266] ACPI: SSDT 0x000000003963A878 002D1B (v02 ALASKA A M I    00000000 INTL 20160527)
[    0.006267] ACPI: UEFI 0x000000003963D598 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.006268] ACPI: LPIT 0x000000003963D5E0 00005C (v01 ALASKA A M I    00000002      01000013)
[    0.006270] ACPI: SSDT 0x000000003963D640 0027DE (v02 ALASKA A M I    00001000 INTL 20160527)
[    0.006271] ACPI: SSDT 0x000000003963FE20 000FFE (v02 ALASKA A M I    00000000 INTL 20160527)
[    0.006273] ACPI: DBGP 0x0000000039640E20 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.006274] ACPI: DBG2 0x0000000039640E58 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.006276] ACPI: DMAR 0x0000000039640EB0 0000A8 (v01 ALASKA A M I    00000002      01000013)
[    0.006277] ACPI: WSMT 0x0000000039640F58 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.006282] ACPI: Local APIC address 0xfee00000
[    0.006449] No NUMA configuration found
[    0.006450] Faking a node at [mem 0x0000000000000000-0x00000008be7fffff]
[    0.006452] NODE_DATA(0) allocated [mem 0x8be7f9000-0x8be7fcfff]
[    0.006469] Zone ranges:
[    0.006470]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006471]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006472]   Normal   [mem 0x0000000100000000-0x00000008be7fffff]
[    0.006472] Movable zone start for each node
[    0.006473] Early memory node ranges
[    0.006473]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.006474]   node   0: [mem 0x0000000000100000-0x00000000315fafff]
[    0.006474]   node   0: [mem 0x00000000315fd000-0x0000000038d00fff]
[    0.006475]   node   0: [mem 0x0000000039164000-0x00000000392cefff]
[    0.006475]   node   0: [mem 0x0000000039fff000-0x0000000039ffffff]
[    0.006476]   node   0: [mem 0x0000000100000000-0x00000008be7fffff]
[    0.006777] Zeroed struct page in unavailable ranges: 35321 pages
[    0.006777] Initmem setup node 0 [mem 0x0000000000001000-0x00000008be7fffff]
[    0.006778] On node 0 totalpages: 8353287
[    0.006779]   DMA zone: 64 pages used for memmap
[    0.006779]   DMA zone: 21 pages reserved
[    0.006780]   DMA zone: 3996 pages, LIFO batch:0
[    0.006829]   DMA32 zone: 3578 pages used for memmap
[    0.006830]   DMA32 zone: 228971 pages, LIFO batch:63
[    0.011479]   Normal zone: 126880 pages used for memmap
[    0.011479]   Normal zone: 8120320 pages, LIFO batch:63
[    0.107746] Reserving Intel graphics memory at [mem 0x3b800000-0x3f7fffff]
[    0.108011] ACPI: PM-Timer IO Port: 0x1808
[    0.108012] ACPI: Local APIC address 0xfee00000
[    0.108015] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.108016] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.108016] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.108017] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.108017] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.108018] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.108057] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.108058] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.108059] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.108059] ACPI: IRQ0 used by override.
[    0.108060] ACPI: IRQ9 used by override.
[    0.108062] Using ACPI (MADT) for SMP configuration information
[    0.108062] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.108064] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[    0.108072] [mem 0x3f800000-0xdfffffff] available for PCI devices
[    0.108073] Booting paravirtualized kernel on bare hardware
[    0.108075] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.142243] random: get_random_bytes called from start_kernel+0x8e/0x46c with crng_init=0
[    0.142245] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[    0.142329] percpu: Embedded 43 pages/cpu s135192 r8192 d32744 u262144
[    0.142332] pcpu-alloc: s135192 r8192 d32744 u262144 alloc=1*2097152
[    0.142332] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[    0.142342] Built 1 zonelists, mobility grouping on.  Total pages: 8222744
[    0.142343] Policy zone: Normal
[    0.142343] Kernel command line: BOOT_IMAGE=/bzimage initrd=/bzroot
[    0.185932] Memory: 32674428K/33413148K available (10252K kernel code, 736K rwdata, 2004K rodata, 1196K init, 2100K bss, 738720K reserved, 0K cma-reserved)
[    0.185957] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.185985] rcu: Hierarchical RCU implementation.
[    0.185985] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.185986] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.186010] NR_IRQS: 16640, nr_irqs: 1536, preallocated irqs: 16
[    0.186226] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.190420] Console: colour VGA+ 80x25
[    0.219674] console [tty0] enabled
[    0.219924] ACPI: Core revision 20180810
[    0.220461] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.220813] hpet clockevent registered
[    0.220863] APIC: Switch to symmetric I/O mode setup
[    0.221108] DMAR: Host address width 39
[    0.221319] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.221493] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.221742] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.222022] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.222271] DMAR: RMRR base: 0x00000039ad4000 end: 0x00000039d1dfff
[    0.222493] DMAR: RMRR base: 0x0000003b000000 end: 0x0000003f7fffff
[    0.222742] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.223022] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.223269] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.225084] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.225291] x2apic enabled
[    0.225553] Switched APIC routing to cluster x2apic.
[    0.230280] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.234828] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[    0.235090] Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=3696000)
[    0.235403] pid_max: default: 32768 minimum: 301
[    0.238033] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.239327] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.239576] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.239860] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.240194] CPU0: Thermal monitoring enabled (TM1)
[    0.240452] process: using mwait in idle threads
[    0.240698] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.240944] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.241086] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.241395] Spectre V2 : Mitigation: Full generic retpoline
[    0.241591] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.242085] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.242336] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.243085] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.243372] TAA: Mitigation: Clear CPU buffers
[    0.243615] MDS: Mitigation: Clear CPU buffers
[    0.244025] Freeing SMP alternatives memory: 32K
[    0.245549] TSC deadline timer enabled
[    0.245553] smpboot: CPU0: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xc)
[    0.245858] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.246085] ... version:                4
[    0.246085] ... bit width:              48
[    0.246086] ... generic registers:      8
[    0.246328] ... value mask:             0000ffffffffffff
[    0.246574] ... max period:             00007fffffffffff
[    0.246821] ... fixed-purpose events:   3
[    0.247065] ... event mask:             00000007000000ff
[    0.247107] rcu: Hierarchical SRCU implementation.
[    0.247419] smp: Bringing up secondary CPUs ...
[    0.247692] x86: Booting SMP configuration:
[    0.247935] .... node  #0, CPUs:      #1 #2 #3 #4 #5
[    0.254330] smp: Brought up 1 node, 6 CPUs
[    0.254578] smpboot: Max logical packages: 1
[    0.254824] smpboot: Total of 6 processors activated (44352.00 BogoMIPS)
[    0.256405] devtmpfs: initialized
[    0.256405] x86/mm: Memory block size: 128MB
[    0.258928] PM: Registering ACPI NVS region [mem 0x315fb000-0x315fbfff] (4096 bytes)
[    0.259086] PM: Registering ACPI NVS region [mem 0x392cf000-0x39687fff] (3903488 bytes)
[    0.259379] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.259697] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.259960] xor: automatically using best checksumming function   avx
[    0.260090] pinctrl core: initialized pinctrl subsystem
[    0.260387] NET: Registered protocol family 16
[    0.260718] cpuidle: using governor ladder
[    0.260718] cpuidle: using governor menu
[    0.261101] KVM setup pv remote TLB flush
[    0.261335] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.261585] ACPI: bus type PCI registered
[    0.261871] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.262087] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.262340] PCI: Using configuration type 1 for base access
[    0.263587] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.263587] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.280470] raid6: sse2x1   gen() 15695 MB/s
[    0.297472] raid6: sse2x1   xor() 10050 MB/s
[    0.314478] raid6: sse2x2   gen() 18613 MB/s
[    0.331481] raid6: sse2x2   xor() 13093 MB/s
[    0.348486] raid6: sse2x4   gen() 23289 MB/s
[    0.365491] raid6: sse2x4   xor() 15011 MB/s
[    0.382493] raid6: avx2x1   gen() 31355 MB/s
[    0.399498] raid6: avx2x1   xor() 20234 MB/s
[    0.416502] raid6: avx2x2   gen() 39148 MB/s
[    0.433506] raid6: avx2x2   xor() 24246 MB/s
[    0.450511] raid6: avx2x4   gen() 45558 MB/s
[    0.467514] raid6: avx2x4   xor() 28617 MB/s
[    0.467731] raid6: using algorithm avx2x4 gen() 45558 MB/s
[    0.467977] raid6: .... xor() 28617 MB/s, rmw enabled
[    0.468086] raid6: using avx2x2 recovery algorithm
[    0.468354] ACPI: Added _OSI(Module Device)
[    0.468598] ACPI: Added _OSI(Processor Device)
[    0.468843] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.469086] ACPI: Added _OSI(Processor Aggregator Device)
[    0.469332] ACPI: Added _OSI(Linux-Dell-Video)
[    0.469576] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.498844] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    1.010357] ACPI: Dynamic OEM Table Load:
[    1.010597] ACPI: SSDT 0xFFFF88889A6F2000 0007AD (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    1.011199] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    1.012134] ACPI: Dynamic OEM Table Load:
[    1.012340] ACPI: SSDT 0xFFFF888899D11400 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    1.012895] ACPI: Dynamic OEM Table Load:
[    1.013087] ACPI: SSDT 0xFFFF888899D0D600 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    1.013614] ACPI: Dynamic OEM Table Load:
[    1.013859] ACPI: SSDT 0xFFFF88889A6F2800 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    1.014457] ACPI: Dynamic OEM Table Load:
[    1.014703] ACPI: SSDT 0xFFFF88889A6E3000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    1.015537] ACPI: Dynamic OEM Table Load:
[    1.015782] ACPI: SSDT 0xFFFF888899D12000 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    1.016334] ACPI: Dynamic OEM Table Load:
[    1.016579] ACPI: SSDT 0xFFFF888899D12400 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    1.018585] ACPI: Interpreter enabled
[    1.018804] ACPI: (supports S0 S3 S5)
[    1.019045] ACPI: Using IOAPIC for interrupt routing
[    1.020104] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.020954] ACPI: Enabled 6 GPEs in block 00 to 7F
[    1.027306] ACPI: Power Resource [USBC] (on)
[    1.029347] ACPI: Power Resource [V0PR] (on)
[    1.029657] ACPI: Power Resource [V1PR] (on)
[    1.030089] ACPI: Power Resource [V2PR] (on)
[    1.035260] ACPI: Power Resource [WRST] (on)
[    1.037730] ACPI: Power Resource [FN00] (off)
[    1.038093] ACPI: Power Resource [FN01] (off)
[    1.038128] ACPI: Power Resource [FN02] (off)
[    1.038414] ACPI: Power Resource [FN03] (off)
[    1.039089] ACPI: Power Resource [FN04] (off)
[    1.039312] ACPI: Power Resource [PIN] (off)
[    1.040089] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.040089] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.040415] acpi PNP0A08:00: _OSC: platform does not support [PME]
[    1.040731] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    1.040979] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    1.041255] PCI host bridge to bus 0000:00
[    1.041500] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.041748] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.041997] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.042086] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xdfffffff window]
[    1.042335] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    1.042585] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.042836] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[    1.043085] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000
[    1.043085] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x50ffffff 64bit]
[    1.043085] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff 64bit pref]
[    1.043085] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    1.043192] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    1.043210] pci 0000:00:12.0: reg 0x10: [mem 0x5123d000-0x5123dfff 64bit]
[    1.043365] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    1.043380] pci 0000:00:14.0: reg 0x10: [mem 0x51220000-0x5122ffff 64bit]
[    1.043428] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.044089] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    1.044089] pci 0000:00:14.2: reg 0x10: [mem 0x51236000-0x51237fff 64bit]
[    1.044089] pci 0000:00:14.2: reg 0x18: [mem 0x5123c000-0x5123cfff 64bit]
[    1.044089] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    1.044089] pci 0000:00:16.0: reg 0x10: [mem 0x5123b000-0x5123bfff 64bit]
[    1.044089] pci 0000:00:16.0: PME# supported from D3hot
[    1.044090] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    1.044090] pci 0000:00:17.0: reg 0x10: [mem 0x51234000-0x51235fff]
[    1.044090] pci 0000:00:17.0: reg 0x14: [mem 0x5123a000-0x5123a0ff]
[    1.044090] pci 0000:00:17.0: reg 0x18: [io  0x3090-0x3097]
[    1.044090] pci 0000:00:17.0: reg 0x1c: [io  0x3080-0x3083]
[    1.044090] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
[    1.044090] pci 0000:00:17.0: reg 0x24: [mem 0x51239000-0x512397ff]
[    1.044090] pci 0000:00:17.0: PME# supported from D3hot
[    1.044092] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[    1.044142] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.044257] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[    1.044316] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[    1.045089] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[    1.045089] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.045089] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    1.045089] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.045089] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[    1.045090] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    1.045090] pci 0000:00:1f.3: reg 0x10: [mem 0x51230000-0x51233fff 64bit]
[    1.045090] pci 0000:00:1f.3: reg 0x20: [mem 0x51000000-0x510fffff 64bit]
[    1.045143] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    1.045295] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    1.045319] pci 0000:00:1f.4: reg 0x10: [mem 0x51238000-0x512380ff 64bit]
[    1.045338] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    1.046089] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    1.046089] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    1.046089] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[    1.046089] pci 0000:00:1f.6: reg 0x10: [mem 0x51200000-0x5121ffff]
[    1.046089] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    1.046089] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    1.046097] pci 0000:02:00.0: [144d:a808] type 00 class 0x010802
[    1.046123] pci 0000:02:00.0: reg 0x10: [mem 0x51100000-0x51103fff 64bit]
[    1.046294] pci 0000:00:1b.4: PCI bridge to [bus 02]
[    1.046539] pci 0000:00:1b.4:   bridge window [mem 0x51100000-0x511fffff]
[    1.047089] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    1.047089] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    1.048090] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[    1.048100] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[    1.048358] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[    1.048616] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[    1.048874] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[    1.049099] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[    1.049357] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[    1.049615] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[    1.051094] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.051336] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.051648] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.051893] vgaarb: loaded
[    1.052123] SCSI subsystem initialized
[    1.052370] libata version 3.00 loaded.
[    1.052370] ACPI: bus type USB registered
[    1.052370] usbcore: registered new interface driver usbfs
[    1.052618] usbcore: registered new interface driver hub
[    1.053147] usbcore: registered new device driver usb
[    1.053362] pps_core: LinuxPPS API ver. 1 registered
[    1.053606] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.053921] PTP clock support registered
[    1.054090] EDAC MC: Ver: 3.0.0
[    1.054387] PCI: Using ACPI for IRQ routing
[    1.097597] PCI: pci_cache_line_size set to 64 bytes
[    1.097657] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    1.097657] e820: reserve RAM buffer [mem 0x315fb000-0x33ffffff]
[    1.097658] e820: reserve RAM buffer [mem 0x38d01000-0x3bffffff]
[    1.097658] e820: reserve RAM buffer [mem 0x392cf000-0x3bffffff]
[    1.097659] e820: reserve RAM buffer [mem 0x3a000000-0x3bffffff]
[    1.097659] e820: reserve RAM buffer [mem 0x8be800000-0x8bfffffff]
[    1.098145] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.098393] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    1.101094] clocksource: Switched to clocksource tsc-early
[    1.101341] FS-Cache: Loaded
[    1.101594] pnp: PnP ACPI init
[    1.101949] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    1.102189] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    1.102434] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    1.102683] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.103043] pnp 00:01: [dma 0 disabled]
[    1.103066] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.103118] system 00:02: [io  0x0680-0x069f] has been reserved
[    1.103364] system 00:02: [io  0x164e-0x164f] has been reserved
[    1.103613] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.103623] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.103664] system 00:04: [io  0x1854-0x1857] has been reserved
[    1.103912] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.103997] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.104246] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.104493] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.104741] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    1.104991] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.105240] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.105488] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.105737] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.105988] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.106081] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    1.106329] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    1.106577] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    1.106825] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    1.107072] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    1.107322] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    1.107570] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    1.107820] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.107942] system 00:07: [io  0x2000-0x20fe] has been reserved
[    1.108191] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.108618] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.108930] pnp: PnP ACPI: found 9 devices
[    1.114334] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.114647] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    1.114648] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    1.114649] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    1.114653] pci 0000:00:1d.0: BAR 14: assigned [mem 0x3f800000-0x3f9fffff]
[    1.114900] pci 0000:00:1d.0: BAR 15: assigned [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    1.115150] pci 0000:00:1d.0: BAR 13: assigned [io  0x4000-0x4fff]
[    1.117091] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    1.117342] pci 0000:00:1b.4: PCI bridge to [bus 02]
[    1.117587] pci 0000:00:1b.4:   bridge window [mem 0x51100000-0x511fffff]
[    1.117837] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    1.118089] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    1.118333] pci 0000:00:1d.0:   bridge window [io  0x4000-0x4fff]
[    1.118582] pci 0000:00:1d.0:   bridge window [mem 0x3f800000-0x3f9fffff]
[    1.118832] pci 0000:00:1d.0:   bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    1.119085] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.119086] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.119087] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.119088] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xdfffffff window]
[    1.119088] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    1.119089] pci_bus 0000:02: resource 1 [mem 0x51100000-0x511fffff]
[    1.119090] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    1.119090] pci_bus 0000:04: resource 1 [mem 0x3f800000-0x3f9fffff]
[    1.119091] pci_bus 0000:04: resource 2 [mem 0x3fa00000-0x3fbfffff 64bit pref]
[    1.119168] NET: Registered protocol family 2
[    1.119485] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[    1.119784] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.120184] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.120489] TCP: Hash tables configured (established 262144 bind 65536)
[    1.120756] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    1.121043] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    1.121341] NET: Registered protocol family 1
[    1.121592] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.122255] PCI: CLS 64 bytes, default 64
[    1.122269] Unpacking initramfs...
[    9.219503] Freeing initrd memory: 126708K
[    9.219744] DMAR: No ATSR found
[    9.220005] DMAR: dmar0: Using Queued invalidation
[    9.220291] DMAR: dmar1: Using Queued invalidation
[    9.220760] DMAR: Setting RMRR:
[    9.221065] DMAR: Setting identity map for device 0000:00:02.0 [0x3b000000 - 0x3f7fffff]
[    9.221347] DMAR: Setting identity map for device 0000:00:14.0 [0x39ad4000 - 0x39d1dfff]
[    9.221605] DMAR: Prepare 0-16MiB unity mapping for LPC
[    9.221867] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    9.222260] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    9.222533] iommu: Adding device 0000:00:00.0 to group 0
[    9.222782] iommu: Adding device 0000:00:02.0 to group 1
[    9.223032] iommu: Adding device 0000:00:12.0 to group 2
[    9.223283] iommu: Adding device 0000:00:14.0 to group 3
[    9.223537] iommu: Adding device 0000:00:14.2 to group 3
[    9.223786] iommu: Adding device 0000:00:16.0 to group 4
[    9.224033] iommu: Adding device 0000:00:17.0 to group 5
[    9.224290] iommu: Adding device 0000:00:1b.0 to group 6
[    9.224540] iommu: Adding device 0000:00:1b.4 to group 7
[    9.224791] iommu: Adding device 0000:00:1c.0 to group 8
[    9.225042] iommu: Adding device 0000:00:1d.0 to group 9
[    9.225298] iommu: Adding device 0000:00:1f.0 to group 10
[    9.225550] iommu: Adding device 0000:00:1f.3 to group 10
[    9.225799] iommu: Adding device 0000:00:1f.4 to group 10
[    9.226047] iommu: Adding device 0000:00:1f.5 to group 10
[    9.226296] iommu: Adding device 0000:00:1f.6 to group 10
[    9.226546] iommu: Adding device 0000:02:00.0 to group 11
[    9.227543] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[    9.227824] clocksource: Switched to clocksource tsc
[    9.228457] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[    9.229512] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    9.229756] fuse init (API version 7.27)
[    9.230396] Key type asymmetric registered
[    9.230643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    9.230906] io scheduler noop registered
[    9.231150] io scheduler deadline registered (default)
[    9.231408] io scheduler cfq registered
[    9.231651] io scheduler mq-deadline registered (default)
[    9.231897] io scheduler kyber registered
[    9.232145] io scheduler bfq registered
[    9.232604] pcieport 0000:00:1b.4: AER enabled with IRQ 123
[    9.232983] intel_idle: MWAIT substates: 0x11142120
[    9.232983] intel_idle: v0.4.1 model 0x9E
[    9.233141] intel_idle: lapic_timer_reliable_states 0xffffffff
[    9.233141] version 39.2
[    9.233798] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    9.254608] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    9.255504] lp: driver loaded but no devices found
[    9.256001] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    9.256360] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    9.256603] AMD IOMMUv2 functionality not available on this system
[    9.258238] loop: module loaded
[    9.258509] VFIO - User Level meta-driver version: 0.3
[    9.258829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.259076] ehci-pci: EHCI PCI platform driver
[    9.259366] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    9.259612] ohci-pci: OHCI PCI platform driver
[    9.259852] uhci_hcd: USB Universal Host Controller Interface driver
[    9.260262] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    9.260508] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    9.261829] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    9.262124] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    9.262319] hub 1-0:1.0: USB hub found
[    9.262611] hub 1-0:1.0: 16 ports detected
[    9.263599] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    9.263842] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    9.264118] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    9.264468] hub 2-0:1.0: USB hub found
[    9.264763] hub 2-0:1.0: 10 ports detected
[    9.265548] usbcore: registered new interface driver usb-storage
[    9.265876] i8042: PNP: No PS/2 controller found.
[    9.266235] mousedev: PS/2 mouse device common for all mice
[    9.266479] usbcore: registered new interface driver synaptics_usb
[    9.266799] input: PC Speaker as /devices/platform/pcspkr/input/input0
[    9.267168] rtc_cmos 00:03: RTC can wake from S4
[    9.267992] rtc_cmos 00:03: registered as rtc0
[    9.268289] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    9.268577] IR NEC protocol handler initialized
[    9.268873] IR RC5(x/sz) protocol handler initialized
[    9.269124] IR RC6 protocol handler initialized
[    9.269476] IR JVC protocol handler initialized
[    9.269720] IR Sony protocol handler initialized
[    9.269965] IR SANYO protocol handler initialized
[    9.270238] IR Sharp protocol handler initialized
[    9.270482] IR MCE Keyboard/mouse protocol handler initialized
[    9.270728] IR XMP protocol handler initialized
[    9.270974] intel_pstate: Intel P-state driver initializing
[    9.271577] intel_pstate: HWP enabled
[    9.271825] hidraw: raw HID events driver (C) Jiri Kosina
[    9.272187] usbcore: registered new interface driver usbhid
[    9.272432] usbhid: USB HID core driver
[    9.272826] xt_time: kernel timezone is -0000
[    9.273113] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    9.273445] gre: GRE over IPv4 demultiplexor driver
[    9.273715] ip_gre: GRE over IPv4 tunneling driver
[    9.274076] IPv4 over IPsec tunneling driver
[    9.274423] Initializing XFRM netlink socket
[    9.274811] NET: Registered protocol family 10
[    9.275274] Segment Routing with IPv6
[    9.275502] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    9.275814] NET: Registered protocol family 17
[    9.276112] Bridge firewalling registered
[    9.276361] 8021q: 802.1Q VLAN Support v1.8
[    9.276583] 9pnet: Installing 9P2000 support
[    9.276854] Key type dns_resolver registered
[    9.277497] mce: Using 12 MCE banks
[    9.277777] microcode: sig=0x906ec, pf=0x2, revision=0xca
[    9.278181] microcode: Microcode Update Driver: v2.2.
[    9.278186] sched_clock: Marking stable (9239441476, 38737760)->(9283852904, -5673668)
[    9.278951] registered taskstats version 1
[    9.279368] Btrfs loaded, crc32c=crc32c-generic
[    9.280295] rtc_cmos 00:03: setting system clock to 2021-01-30 04:10:56 UTC (1611979856)
[    9.587161] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    9.724126] usb-storage 1-4:1.0: USB Mass Storage device detected
[    9.724867] scsi host0: usb-storage 1-4:1.0
[   10.755079] scsi 0:0:0:0: Direct-Access                               8.07 PQ: 0 ANSI: 4
[   10.755696] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.756708] sd 0:0:0:0: [sda] 62259200 512-byte logical blocks: (31.9 GB/29.7 GiB)
[   10.757808] sd 0:0:0:0: [sda] Write Protect is off
[   10.758121] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[   10.758931] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   10.763311]  sda: sda1
[   10.766081] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   12.289247] floppy0: no floppy controllers found
[   12.292188] Freeing unused kernel image memory: 1196K
[   12.299186] Write protecting the kernel read-only data: 14336k
[   12.300776] Freeing unused kernel image memory: 2012K
[   12.301205] Freeing unused kernel image memory: 44K
[   12.301512] rodata_test: all tests were successful
[   12.301811] Run /init as init process
[   12.371171] random: udevd: uninitialized urandom read (16 bytes read)
[   12.371493] random: udevd: uninitialized urandom read (16 bytes read)
[   12.371780] random: udevd: uninitialized urandom read (16 bytes read)
[   12.374710] udevd[1328]: starting eudev-3.2.5
[   12.569441] random: fast init done
[   13.337544] random: crng init done
[   13.337846] random: 7 urandom warning(s) missed due to ratelimiting
[   14.492113] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[   14.492432] ACPI: Sleep Button [SLPB]
[   14.492697] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   14.492959] ACPI: Power Button [PWRB]
[   14.494893] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   14.495158] ACPI: Power Button [PWRF]
[   14.534190] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[   14.539507] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[   14.548318] ahci 0000:00:17.0: version 3.0
[   14.548877] nvme nvme0: pci function 0000:02:00.0
[   14.558545] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[   14.558775] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst
[   14.574448] scsi host1: ahci
[   14.574722] scsi host2: ahci
[   14.575010] scsi host3: ahci
[   14.575301] scsi host4: ahci
[   14.575663] scsi host5: ahci
[   14.575981] scsi host6: ahci
[   14.576257] ata1: SATA max UDMA/133 abar m2048@0x51239000 port 0x51239100 irq 125
[   14.576505] ata2: SATA max UDMA/133 abar m2048@0x51239000 port 0x51239180 irq 125
[   14.576755] ata3: SATA max UDMA/133 abar m2048@0x51239000 port 0x51239200 irq 125
[   14.577005] ata4: SATA max UDMA/133 abar m2048@0x51239000 port 0x51239280 irq 125
[   14.577257] ata5: SATA max UDMA/133 abar m2048@0x51239000 port 0x51239300 irq 125
[   14.577506] ata6: SATA max UDMA/133 abar m2048@0x51239000 port 0x51239380 irq 125
[   14.605254] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   14.605535] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   14.670113] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   14.670332] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   14.670718] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   14.815660] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   14.815919] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   14.816177] RAPL PMU: hw unit of domain package 2^-14 Joules
[   14.816423] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   14.816425] nvme nvme0: missing or invalid SUBNQN field.
[   14.816668] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   14.816668] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   14.816930] nvme nvme0: Shutdown timeout set to 8 seconds
[   14.832532]  nvme0n1: p1
[   14.882363] cryptd: max_cpu_qlen set to 1000
[   14.886347] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.886716] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.887067] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.887440] ata6: SATA link down (SStatus 4 SControl 300)
[   14.887756] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.888021] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.889172] AVX2 version of gcm_enc/dec engaged.
[   14.889425] AES CTR mode by8 optimization enabled
[   14.889570] ata1.00: supports DRM functions and may not be fully accessible
[   14.890308] ata1.00: NCQ Send/Recv Log not supported
[   14.890553] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, S21JNSAG264354L, EMT01B6Q, max UDMA/133
[   14.890872] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[   14.892142] ata1.00: supports DRM functions and may not be fully accessible
[   14.892757] ata1.00: NCQ Send/Recv Log not supported
[   14.893978] ata1.00: configured for UDMA/133
[   14.894276] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[   14.894610] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[   14.894864] sd 1:0:0:0: [sdb] Write Protect is off
[   14.895113] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   14.895118] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.895120] ata4.00: ATA-9: WDC WD120EFAX-68UNTN0, 5PGXSLEE, 81.00A81, max UDMA/133
[   14.895698] ata4.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA
[   14.895952] ata2.00: ATA-9: WDC WD120EFAX-68UNTN0, 5PG1TSTE, 81.00A81, max UDMA/133
[   14.896197] ata2.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA
[   14.896449] ata3.00: ATA-9: WDC WD120EFAX-68UNTN0, 5PG9T3VD, 81.00A81, max UDMA/133
[   14.896700] ata3.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA
[   14.896962] ata5.00: ATA-9: WDC WD120EFAX-68UNTN0, 5PHHZ03D, 81.00A81, max UDMA/133
[   14.897216] ata5.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA
[   14.897472] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   14.897980]  sdb: sdb1
[   14.898327] sd 1:0:0:0: [sdb] Attached SCSI disk
[   14.905808] ata2.00: configured for UDMA/133
[   14.906107] scsi 2:0:0:0: Direct-Access     ATA      WDC WD120EFAX-68 0A81 PQ: 0 ANSI: 5
[   14.906391] ata3.00: configured for UDMA/133
[   14.906436] sd 2:0:0:0: [sdc] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[   14.906653] ata5.00: configured for UDMA/133
[   14.906891] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   14.907389] sd 2:0:0:0: [sdc] Write Protect is off
[   14.907636] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   14.907639] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.907993] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   14.908299] scsi 3:0:0:0: Direct-Access     ATA      WDC WD120EFAX-68 0A81 PQ: 0 ANSI: 5
[   14.908612] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   14.908883] sd 3:0:0:0: [sdd] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[   14.909144] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[   14.909474] ata4.00: configured for UDMA/133
[   14.909729] sd 3:0:0:0: [sdd] Write Protect is off
[   14.909774] scsi 4:0:0:0: Direct-Access     ATA      WDC WD120EFAX-68 0A81 PQ: 0 ANSI: 5
[   14.909971] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   14.910226] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.910289] sd 4:0:0:0: [sde] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[   14.910564] sd 4:0:0:0: Attached scsi generic sg4 type 0
[   14.910788] sd 4:0:0:0: [sde] 4096-byte physical blocks
[   14.911088] scsi 5:0:0:0: Direct-Access     ATA      WDC WD120EFAX-68 0A81 PQ: 0 ANSI: 5
[   14.911282] sd 4:0:0:0: [sde] Write Protect is off
[   14.911586] sd 5:0:0:0: Attached scsi generic sg5 type 0
[   14.911776] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[   14.912026] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.912043] sd 5:0:0:0: [sdf] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[   14.912586] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[   14.912834] sd 5:0:0:0: [sdf] Write Protect is off
[   14.913078] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[   14.913080] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.961181]  sdc: sdc1
[   14.961993] sd 2:0:0:0: [sdc] Attached SCSI disk
[   14.963859]  sdf: sdf1
[   14.964774] sd 5:0:0:0: [sdf] Attached SCSI disk
[   14.967913]  sde: sde1
[   14.968766] sd 4:0:0:0: [sde] Attached SCSI disk
[   14.973244]  sdd: sdd1
[   14.974014] sd 3:0:0:0: [sdd] Attached SCSI disk
[   15.009705] BTRFS: device fsid 1df2cdfd-d2cb-498b-be96-13cb969e11f5 devid 1 transid 41262420 /dev/sdb1
[   15.085009] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[   15.163694] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b4:2e:99:8b:38:ed
[   15.164015] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[   15.164416] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[   16.585188] ACPI: Invalid passive threshold
[   16.585767] thermal LNXTHERM:00: registered as thermal_zone1
[   16.586027] ACPI: Thermal Zone [TZ10] (17 C)
[   16.586526] thermal LNXTHERM:01: registered as thermal_zone2
[   16.586787] ACPI: Thermal Zone [TZ00] (28 C)
[   17.216616] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   17.216617] MII link monitoring set to 100 ms
[   17.217666] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
[   17.217667] 8021q: adding VLAN 0 to HW filter on device bond0
[   17.425583] bond0: Enslaving eth0 as a backup interface with a down link
[   19.639663] device bond0 entered promiscuous mode
[   19.639668] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
[   19.639668] 8021q: adding VLAN 0 to HW filter on device bond0
[   19.639676] br0: port 1(bond0) entered blocking state
[   19.639677] br0: port 1(bond0) entered disabled state
[   20.355828] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   20.369252] bond0: link status definitely up for interface eth0, 1000 Mbps full duplex
[   20.369257] bond0: making interface eth0 the new active one
[   20.369259] device eth0 entered promiscuous mode
[   20.369568] bond0: first active interface up!
[   20.369585] br0: port 1(bond0) entered blocking state
[   20.369588] br0: port 1(bond0) entered forwarding state
[   38.530195] md: unRAID driver 2.9.13 installed
[   38.541920] mdcmd (1): import 0 sde 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PGXSLEE
[   38.542000] md: import disk0: (sde) WDC_WD120EFAX-68UNTN0_5PGXSLEE size: 11718885324
[   38.542274] mdcmd (2): import 1 sdc 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG1TSTE
[   38.542343] md: import disk1: (sdc) WDC_WD120EFAX-68UNTN0_5PG1TSTE size: 11718885324
[   38.542640] mdcmd (3): import 2 sdd 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG9T3VD
[   38.542698] md: import disk2: (sdd) WDC_WD120EFAX-68UNTN0_5PG9T3VD size: 11718885324
[   38.542952] mdcmd (4): import 3 sdf 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PHHZ03D
[   38.543037] md: import disk3: (sdf) WDC_WD120EFAX-68UNTN0_5PHHZ03D size: 11718885324
[   38.543044] mdcmd (5): import 4
[   38.543048] mdcmd (6): import 5
[   38.543052] mdcmd (7): import 6
[   38.543056] mdcmd (8): import 7
[   38.543060] mdcmd (9): import 8
[   38.543064] mdcmd (10): import 9
[   38.543068] mdcmd (11): import 10
[   38.543072] mdcmd (12): import 11
[   38.543076] mdcmd (13): import 12
[   38.543079] mdcmd (14): import 13
[   38.543096] mdcmd (15): import 14
[   38.543099] mdcmd (16): import 15
[   38.543103] mdcmd (17): import 16
[   38.543107] mdcmd (18): import 17
[   38.543111] mdcmd (19): import 18
[   38.543115] mdcmd (20): import 19
[   38.543119] mdcmd (21): import 20
[   38.543123] mdcmd (22): import 21
[   38.543127] mdcmd (23): import 22
[   38.543130] mdcmd (24): import 23
[   38.543134] mdcmd (25): import 24
[   38.543138] mdcmd (26): import 25
[   38.543141] mdcmd (27): import 26
[   38.543145] mdcmd (28): import 27
[   38.543149] mdcmd (29): import 28
[   38.543153] mdcmd (30): import 29
[   38.543153] md: import_slot: 29 empty
[   42.907012] mdcmd (31): set md_num_stripes 1280
[   42.907016] mdcmd (32): set md_queue_limit 80
[   42.907018] mdcmd (33): set md_sync_limit 5
[   42.907020] mdcmd (34): set md_write_method
[   42.907022] mdcmd (35): set spinup_group 0 0
[   42.907025] mdcmd (36): set spinup_group 1 0
[   42.907027] mdcmd (37): set spinup_group 2 0
[   42.907029] mdcmd (38): set spinup_group 3 0
[   42.907044] mdcmd (39): start STOPPED
[   42.907394] unraid: allocating 25990K for 1280 stripes (5 disks)
[   42.909065] md1: running, size: 11718885324 blocks
[   42.909137] md2: running, size: 11718885324 blocks
[   42.909210] md3: running, size: 11718885324 blocks
[   44.758609] SGI XFS with ACLs, security attributes, no debug enabled
[   44.759311] XFS (md1): Mounting V5 Filesystem
[   44.881500] XFS (md1): Ending clean mount
[   45.009541] XFS (md2): Mounting V5 Filesystem
[   45.145377] XFS (md2): Ending clean mount
[   45.253471] XFS (md3): Mounting V5 Filesystem
[   45.406841] XFS (md3): Ending clean mount
[   45.516948] BTRFS info (device sdb1): allowing degraded mounts
[   45.516949] BTRFS info (device sdb1): disk space caching is enabled
[   45.516950] BTRFS info (device sdb1): has skinny extents
[   45.517406] BTRFS warning (device sdb1): devid 2 uuid 74ff0502-592b-4cb4-a918-e6b975b6e008 is missing
[   45.517420] BTRFS error (device sdb1): failed to read chunk root
[   45.526527] BTRFS error (device sdb1): open_ctree failed
[   47.411328] XFS (nvme0n1p1): Mounting V5 Filesystem
[   47.415352] XFS (nvme0n1p1): Ending clean mount
[  655.713765] BTRFS info (device sdb1): trying to use backup root at mount time
[  655.713766] BTRFS info (device sdb1): disk space caching is enabled
[  655.713767] BTRFS info (device sdb1): has skinny extents
[  655.714521] BTRFS error (device sdb1): failed to read chunk root
[  655.721448] BTRFS error (device sdb1): open_ctree failed
[  784.220824] BTRFS info (device sdb1): allowing degraded mounts
[  784.220826] BTRFS info (device sdb1): trying to use backup root at mount time
[  784.220826] BTRFS info (device sdb1): disk space caching is enabled
[  784.220827] BTRFS info (device sdb1): has skinny extents
[  784.221553] BTRFS error (device sdb1): failed to read chunk root
[  784.234815] BTRFS error (device sdb1): open_ctree failed
[  803.427894] BTRFS info (device sdb1): disabling tree log
[  803.427895] BTRFS info (device sdb1): disabling log replay at mount time
[  803.427896] BTRFS info (device sdb1): disk space caching is enabled
[  803.427896] BTRFS info (device sdb1): has skinny extents
[  803.428760] BTRFS error (device sdb1): failed to read chunk root
[  803.436800] BTRFS error (device sdb1): open_ctree failed
[ 1064.907566] mdcmd (40): nocheck cancel
[ 1065.907828] mdcmd (41): spinup 0
[ 1065.907833] mdcmd (42): spinup 1
[ 1065.907835] mdcmd (43): spinup 2
[ 1065.907838] mdcmd (44): spinup 3
[ 1069.000719] XFS (md1): Unmounting Filesystem
[ 1069.031970] XFS (md2): Unmounting Filesystem
[ 1069.171284] XFS (md3): Unmounting Filesystem
[ 1069.292320] mdcmd (45): stop
[ 1069.292323] md1: stopping
[ 1069.313356] md2: stopping
[ 1069.337351] md3: stopping
[ 1139.565866] md: unRAID driver removed
[ 1139.575935] md: unRAID driver 2.9.13 installed
[ 1139.581948] mdcmd (1): import 0 sde 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PGXSLEE
[ 1139.581961] md: import disk0: (sde) WDC_WD120EFAX-68UNTN0_5PGXSLEE size: 11718885324
[ 1139.582119] mdcmd (2): import 1 sdc 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG1TSTE
[ 1139.582222] md: import disk1: (sdc) WDC_WD120EFAX-68UNTN0_5PG1TSTE size: 11718885324
[ 1139.582371] mdcmd (3): import 2 sdd 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG9T3VD
[ 1139.582473] md: import disk2: (sdd) WDC_WD120EFAX-68UNTN0_5PG9T3VD size: 11718885324
[ 1139.582721] mdcmd (4): import 3 sdf 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PHHZ03D
[ 1139.582757] md: import disk3: (sdf) WDC_WD120EFAX-68UNTN0_5PHHZ03D size: 11718885324
[ 1139.582765] mdcmd (5): import 4
[ 1139.582769] mdcmd (6): import 5
[ 1139.582772] mdcmd (7): import 6
[ 1139.582775] mdcmd (8): import 7
[ 1139.582779] mdcmd (9): import 8
[ 1139.582782] mdcmd (10): import 9
[ 1139.582786] mdcmd (11): import 10
[ 1139.582789] mdcmd (12): import 11
[ 1139.582793] mdcmd (13): import 12
[ 1139.582796] mdcmd (14): import 13
[ 1139.582799] mdcmd (15): import 14
[ 1139.582802] mdcmd (16): import 15
[ 1139.582806] mdcmd (17): import 16
[ 1139.582809] mdcmd (18): import 17
[ 1139.582812] mdcmd (19): import 18
[ 1139.582815] mdcmd (20): import 19
[ 1139.582819] mdcmd (21): import 20
[ 1139.582822] mdcmd (22): import 21
[ 1139.582825] mdcmd (23): import 22
[ 1139.582828] mdcmd (24): import 23
[ 1139.582831] mdcmd (25): import 24
[ 1139.582834] mdcmd (26): import 25
[ 1139.582838] mdcmd (27): import 26
[ 1139.582841] mdcmd (28): import 27
[ 1139.582844] mdcmd (29): import 28
[ 1139.582848] mdcmd (30): import 29
[ 1139.582848] md: import_slot: 29 empty
[ 1146.373672] mdcmd (31): set md_num_stripes 1280
[ 1146.373675] mdcmd (32): set md_queue_limit 80
[ 1146.373677] mdcmd (33): set md_sync_limit 5
[ 1146.373679] mdcmd (34): set md_write_method
[ 1146.373681] mdcmd (35): set spinup_group 0 0
[ 1146.373684] mdcmd (36): set spinup_group 1 0
[ 1146.373686] mdcmd (37): set spinup_group 2 0
[ 1146.373688] mdcmd (38): set spinup_group 3 0
[ 1146.373701] mdcmd (39): start STOPPED
[ 1146.373914] unraid: allocating 25990K for 1280 stripes (5 disks)
[ 1146.375779] md1: running, size: 11718885324 blocks
[ 1146.375881] md2: running, size: 11718885324 blocks
[ 1146.375916] md3: running, size: 11718885324 blocks
[ 1148.176115] XFS (md1): Mounting V5 Filesystem
[ 1148.296732] XFS (md1): Ending clean mount
[ 1148.352613] XFS (md2): Mounting V5 Filesystem
[ 1148.481929] XFS (md2): Ending clean mount
[ 1148.587651] XFS (md3): Mounting V5 Filesystem
[ 1148.724798] XFS (md3): Ending clean mount
[ 1149.878315] BTRFS info (device sdb1): allowing degraded mounts
[ 1149.878316] BTRFS info (device sdb1): disk space caching is enabled
[ 1149.878317] BTRFS info (device sdb1): has skinny extents
[ 1149.878972] BTRFS error (device sdb1): failed to read chunk root
[ 1149.895278] BTRFS error (device sdb1): open_ctree failed
[ 1657.126232] BTRFS info (device sdb1): trying to use backup root at mount time
[ 1657.126233] BTRFS info (device sdb1): disk space caching is enabled
[ 1657.126233] BTRFS info (device sdb1): has skinny extents
[ 1657.127177] BTRFS error (device sdb1): failed to read chunk root
[ 1657.132036] BTRFS error (device sdb1): open_ctree failed
[ 1984.517954] BTRFS info (device sdb1): trying to use backup root at mount time
[ 1984.517955] BTRFS info (device sdb1): disk space caching is enabled
[ 1984.517955] BTRFS info (device sdb1): has skinny extents
[ 1984.518856] BTRFS error (device sdb1): failed to read chunk root
[ 1984.525110] BTRFS error (device sdb1): open_ctree failed
[ 2495.572626] mdcmd (40): nocheck cancel
[ 2496.572901] mdcmd (41): spinup 0
[ 2496.572906] mdcmd (42): spinup 1
[ 2496.572909] mdcmd (43): spinup 2
[ 2496.572912] mdcmd (44): spinup 3
[ 2499.632348] XFS (md1): Unmounting Filesystem
[ 2499.660612] XFS (md2): Unmounting Filesystem
[ 2499.794661] XFS (md3): Unmounting Filesystem
[ 2499.901030] mdcmd (45): stop
[ 2499.901033] md1: stopping
[ 2499.923934] md2: stopping
[ 2499.947932] md3: stopping
[ 2503.609100] md: unRAID driver removed
[ 2503.620730] md: unRAID driver 2.9.13 installed
[ 2503.628826] mdcmd (1): import 0 sde 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PGXSLEE
[ 2503.628914] md: import disk0: (sde) WDC_WD120EFAX-68UNTN0_5PGXSLEE size: 11718885324
[ 2503.655651] mdcmd (2): import 1 sdc 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG1TSTE
[ 2503.655721] md: import disk1: (sdc) WDC_WD120EFAX-68UNTN0_5PG1TSTE size: 11718885324
[ 2503.678165] mdcmd (3): import 2 sdd 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG9T3VD
[ 2503.678261] md: import disk2: (sdd) WDC_WD120EFAX-68UNTN0_5PG9T3VD size: 11718885324
[ 2503.702611] mdcmd (4): import 3 sdf 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PHHZ03D
[ 2503.702677] md: import disk3: (sdf) WDC_WD120EFAX-68UNTN0_5PHHZ03D size: 11718885324
[ 2503.702685] mdcmd (5): import 4
[ 2503.702689] mdcmd (6): import 5
[ 2503.702693] mdcmd (7): import 6
[ 2503.702696] mdcmd (8): import 7
[ 2503.702699] mdcmd (9): import 8
[ 2503.702703] mdcmd (10): import 9
[ 2503.702706] mdcmd (11): import 10
[ 2503.702710] mdcmd (12): import 11
[ 2503.702713] mdcmd (13): import 12
[ 2503.702716] mdcmd (14): import 13
[ 2503.702719] mdcmd (15): import 14
[ 2503.702722] mdcmd (16): import 15
[ 2503.702725] mdcmd (17): import 16
[ 2503.702729] mdcmd (18): import 17
[ 2503.702732] mdcmd (19): import 18
[ 2503.702735] mdcmd (20): import 19
[ 2503.702738] mdcmd (21): import 20
[ 2503.702741] mdcmd (22): import 21
[ 2503.702745] mdcmd (23): import 22
[ 2503.702748] mdcmd (24): import 23
[ 2503.702751] mdcmd (25): import 24
[ 2503.702754] mdcmd (26): import 25
[ 2503.702757] mdcmd (27): import 26
[ 2503.702760] mdcmd (28): import 27
[ 2503.702763] mdcmd (29): import 28
[ 2503.702767] mdcmd (30): import 29
[ 2503.702767] md: import_slot: 29 empty
[ 2520.965440] mdcmd (31): set md_num_stripes 1280
[ 2520.965444] mdcmd (32): set md_queue_limit 80
[ 2520.965446] mdcmd (33): set md_sync_limit 5
[ 2520.965447] mdcmd (34): set md_write_method
[ 2520.965450] mdcmd (35): set spinup_group 0 0
[ 2520.965452] mdcmd (36): set spinup_group 1 0
[ 2520.965454] mdcmd (37): set spinup_group 2 0
[ 2520.965456] mdcmd (38): set spinup_group 3 0
[ 2520.965470] mdcmd (39): start STOPPED
[ 2520.965714] unraid: allocating 25990K for 1280 stripes (5 disks)
[ 2520.967499] md1: running, size: 11718885324 blocks
[ 2520.967600] md2: running, size: 11718885324 blocks
[ 2520.967667] md3: running, size: 11718885324 blocks
[ 2522.774611] XFS (md1): Mounting V5 Filesystem
[ 2522.887024] XFS (md1): Ending clean mount
[ 2522.925455] XFS (md2): Mounting V5 Filesystem
[ 2523.054236] XFS (md2): Ending clean mount
[ 2523.164518] XFS (md3): Mounting V5 Filesystem
[ 2523.298374] XFS (md3): Ending clean mount
[ 2523.412927] BTRFS info (device sdb1): allowing degraded mounts
[ 2523.412928] BTRFS info (device sdb1): disk space caching is enabled
[ 2523.412929] BTRFS info (device sdb1): has skinny extents
[ 2523.413691] BTRFS error (device sdb1): failed to read chunk root
[ 2523.422018] BTRFS error (device sdb1): open_ctree failed
[ 2704.568917] mdcmd (40): nocheck cancel
[ 2705.569117] mdcmd (41): spinup 0
[ 2705.569122] mdcmd (42): spinup 1
[ 2705.569148] mdcmd (43): spinup 2
[ 2705.569152] mdcmd (44): spinup 3
[ 2707.669938] XFS (nvme0n1p1): Unmounting Filesystem
[ 2708.665308] XFS (md1): Unmounting Filesystem
[ 2708.711477] XFS (md2): Unmounting Filesystem
[ 2708.853599] XFS (md3): Unmounting Filesystem
[ 2708.972341] mdcmd (45): stop
[ 2708.972344] md1: stopping
[ 2708.992908] md2: stopping
[ 2709.016901] md3: stopping
[ 2727.971441] BTRFS info (device sdb1): trying to use backup root at mount time
[ 2727.971442] BTRFS info (device sdb1): disk space caching is enabled
[ 2727.971442] BTRFS info (device sdb1): has skinny extents
[ 2727.972275] BTRFS error (device sdb1): failed to read chunk root
[ 2727.977907] BTRFS error (device sdb1): open_ctree failed
[ 2751.699849] BTRFS info (device sdb1): allowing degraded mounts
[ 2751.699864] BTRFS info (device sdb1): trying to use backup root at mount time
[ 2751.699865] BTRFS info (device sdb1): disk space caching is enabled
[ 2751.699865] BTRFS info (device sdb1): has skinny extents
[ 2751.700756] BTRFS error (device sdb1): failed to read chunk root
[ 2751.708942] BTRFS error (device sdb1): open_ctree failed
[ 2769.062130] BTRFS info (device sdb1): disabling tree log
[ 2769.062131] BTRFS info (device sdb1): disabling log replay at mount time
[ 2769.062132] BTRFS info (device sdb1): disk space caching is enabled
[ 2769.062132] BTRFS info (device sdb1): has skinny extents
[ 2769.063165] BTRFS error (device sdb1): failed to read chunk root
[ 2769.070925] BTRFS error (device sdb1): open_ctree failed
[ 2798.939422] XFS (nvme0n1p1): Mounting V5 Filesystem
[ 2798.943902] XFS (nvme0n1p1): Ending clean mount
[ 3326.623818] XFS (nvme0n1p1): Unmounting Filesystem
[ 3336.409340] udevd[19943]: inotify_add_watch(5, /dev/nvme0n1p1, 10) failed: No such file or directory
[ 3341.429242]  nvme0n1:
[ 3352.064179]  nvme0n1: p1
[ 3352.072182]  nvme0n1: p1
[ 3352.088714] BTRFS: device fsid a07d7790-4cb2-4dd6-b62c-c877c291ff7f devid 1 transid 5 /dev/nvme0n1p1
[ 3355.115753]  nvme0n1: p1
[ 3388.265136] BTRFS info (device nvme0n1p1): turning on discard
[ 3388.265138] BTRFS info (device nvme0n1p1): disk space caching is enabled
[ 3388.265138] BTRFS info (device nvme0n1p1): has skinny extents
[ 3388.265138] BTRFS info (device nvme0n1p1): flagging fs with big metadata feature
[ 3388.266448] BTRFS info (device nvme0n1p1): enabling ssd optimizations
[ 3388.266626] BTRFS info (device nvme0n1p1): checking UUID tree
[ 3520.463497] md: unRAID driver removed
[ 3520.473763] md: unRAID driver 2.9.13 installed
[ 3520.478812] mdcmd (1): import 0 sde 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PGXSLEE
[ 3520.478926] md: import disk0: (sde) WDC_WD120EFAX-68UNTN0_5PGXSLEE size: 11718885324
[ 3520.479174] mdcmd (2): import 1 sdc 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG1TSTE
[ 3520.479279] md: import disk1: (sdc) WDC_WD120EFAX-68UNTN0_5PG1TSTE size: 11718885324
[ 3520.479535] mdcmd (3): import 2 sdd 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG9T3VD
[ 3520.479575] md: import disk2: (sdd) WDC_WD120EFAX-68UNTN0_5PG9T3VD size: 11718885324
[ 3520.479713] mdcmd (4): import 3 sdf 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PHHZ03D
[ 3520.479723] md: import disk3: (sdf) WDC_WD120EFAX-68UNTN0_5PHHZ03D size: 11718885324
[ 3520.479736] mdcmd (5): import 4
[ 3520.479740] mdcmd (6): import 5
[ 3520.479744] mdcmd (7): import 6
[ 3520.479748] mdcmd (8): import 7
[ 3520.479751] mdcmd (9): import 8
[ 3520.479754] mdcmd (10): import 9
[ 3520.479758] mdcmd (11): import 10
[ 3520.479761] mdcmd (12): import 11
[ 3520.479765] mdcmd (13): import 12
[ 3520.479768] mdcmd (14): import 13
[ 3520.479771] mdcmd (15): import 14
[ 3520.479774] mdcmd (16): import 15
[ 3520.479777] mdcmd (17): import 16
[ 3520.479780] mdcmd (18): import 17
[ 3520.479784] mdcmd (19): import 18
[ 3520.479787] mdcmd (20): import 19
[ 3520.479790] mdcmd (21): import 20
[ 3520.479793] mdcmd (22): import 21
[ 3520.479797] mdcmd (23): import 22
[ 3520.479800] mdcmd (24): import 23
[ 3520.479803] mdcmd (25): import 24
[ 3520.479806] mdcmd (26): import 25
[ 3520.479809] mdcmd (27): import 26
[ 3520.479815] mdcmd (28): import 27
[ 3520.479834] mdcmd (29): import 28
[ 3520.479838] mdcmd (30): import 29
[ 3520.479839] md: import_slot: 29 empty
[ 3526.864678] mdcmd (31): set md_num_stripes 1280
[ 3526.864681] mdcmd (32): set md_queue_limit 80
[ 3526.864684] mdcmd (33): set md_sync_limit 5
[ 3526.864686] mdcmd (34): set md_write_method
[ 3526.864688] mdcmd (35): set spinup_group 0 0
[ 3526.864690] mdcmd (36): set spinup_group 1 0
[ 3526.864692] mdcmd (37): set spinup_group 2 0
[ 3526.864694] mdcmd (38): set spinup_group 3 0
[ 3526.864709] mdcmd (39): start STOPPED
[ 3526.864828] unraid: allocating 25990K for 1280 stripes (5 disks)
[ 3526.866562] md1: running, size: 11718885324 blocks
[ 3526.866698] md2: running, size: 11718885324 blocks
[ 3526.866733] md3: running, size: 11718885324 blocks
[ 3528.696939] XFS (md1): Mounting V5 Filesystem
[ 3528.820531] XFS (md1): Ending clean mount
[ 3528.883771] XFS (md2): Mounting V5 Filesystem
[ 3529.018855] XFS (md2): Ending clean mount
[ 3529.131756] XFS (md3): Mounting V5 Filesystem
[ 3529.284649] XFS (md3): Ending clean mount
[ 3530.479625] BTRFS info (device sdb1): allowing degraded mounts
[ 3530.479626] BTRFS info (device sdb1): disk space caching is enabled
[ 3530.479627] BTRFS info (device sdb1): has skinny extents
[ 3530.480086] BTRFS error (device sdb1): failed to read chunk root
[ 3530.490034] BTRFS error (device sdb1): open_ctree failed
[ 3579.400667] mdcmd (40): nocheck cancel
[ 3580.400950] mdcmd (41): spinup 0
[ 3580.400955] mdcmd (42): spinup 1
[ 3580.400958] mdcmd (43): spinup 2
[ 3580.400961] mdcmd (44): spinup 3
[ 3583.496395] XFS (md1): Unmounting Filesystem
[ 3583.537656] XFS (md2): Unmounting Filesystem
[ 3583.579075] XFS (md3): Unmounting Filesystem
[ 3583.658609] mdcmd (45): stop
[ 3583.658612] md1: stopping
[ 3583.680012] md2: stopping
[ 3583.704007] md3: stopping
[ 3650.329893] md: unRAID driver removed
[ 3650.341956] md: unRAID driver 2.9.13 installed
[ 3650.348938] mdcmd (1): import 0 sde 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PGXSLEE
[ 3650.349020] md: import disk0: (sde) WDC_WD120EFAX-68UNTN0_5PGXSLEE size: 11718885324
[ 3650.349285] mdcmd (2): import 1 sdc 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG1TSTE
[ 3650.349348] md: import disk1: (sdc) WDC_WD120EFAX-68UNTN0_5PG1TSTE size: 11718885324
[ 3650.349610] mdcmd (3): import 2 sdd 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PG9T3VD
[ 3650.349679] md: import disk2: (sdd) WDC_WD120EFAX-68UNTN0_5PG9T3VD size: 11718885324
[ 3650.349889] mdcmd (4): import 3 sdf 64 11718885324 0 WDC_WD120EFAX-68UNTN0_5PHHZ03D
[ 3650.349927] md: import disk3: (sdf) WDC_WD120EFAX-68UNTN0_5PHHZ03D size: 11718885324
[ 3650.349933] mdcmd (5): import 4
[ 3650.349937] mdcmd (6): import 5
[ 3650.349941] mdcmd (7): import 6
[ 3650.349947] mdcmd (8): import 7
[ 3650.349951] mdcmd (9): import 8
[ 3650.349954] mdcmd (10): import 9
[ 3650.349958] mdcmd (11): import 10
[ 3650.349962] mdcmd (12): import 11
[ 3650.349979] mdcmd (13): import 12
[ 3650.349982] mdcmd (14): import 13
[ 3650.349985] mdcmd (15): import 14
[ 3650.349988] mdcmd (16): import 15
[ 3650.349991] mdcmd (17): import 16
[ 3650.349995] mdcmd (18): import 17
[ 3650.350013] mdcmd (19): import 18
[ 3650.350016] mdcmd (20): import 19
[ 3650.350019] mdcmd (21): import 20
[ 3650.350022] mdcmd (22): import 21
[ 3650.350026] mdcmd (23): import 22
[ 3650.350029] mdcmd (24): import 23
[ 3650.350032] mdcmd (25): import 24
[ 3650.350035] mdcmd (26): import 25
[ 3650.350038] mdcmd (27): import 26
[ 3650.350041] mdcmd (28): import 27
[ 3650.350045] mdcmd (29): import 28
[ 3650.350048] mdcmd (30): import 29
[ 3650.350048] md: import_slot: 29 empty
[ 3657.896560] mdcmd (31): set md_num_stripes 1280
[ 3657.896563] mdcmd (32): set md_queue_limit 80
[ 3657.896566] mdcmd (33): set md_sync_limit 5
[ 3657.896567] mdcmd (34): set md_write_method
[ 3657.896570] mdcmd (35): set spinup_group 0 0
[ 3657.896572] mdcmd (36): set spinup_group 1 0
[ 3657.896574] mdcmd (37): set spinup_group 2 0
[ 3657.896576] mdcmd (38): set spinup_group 3 0
[ 3657.896590] mdcmd (39): start STOPPED
[ 3657.896844] unraid: allocating 25990K for 1280 stripes (5 disks)
[ 3657.898675] md1: running, size: 11718885324 blocks
[ 3657.898751] md2: running, size: 11718885324 blocks
[ 3657.898806] md3: running, size: 11718885324 blocks
[ 3659.721949] XFS (md1): Mounting V5 Filesystem
[ 3659.845256] XFS (md1): Ending clean mount
[ 3659.882916] XFS (md2): Mounting V5 Filesystem
[ 3660.018821] XFS (md2): Ending clean mount
[ 3660.131921] XFS (md3): Mounting V5 Filesystem
[ 3660.284457] XFS (md3): Ending clean mount
[ 3660.395013] BTRFS info (device sdb1): allowing degraded mounts
[ 3660.395014] BTRFS info (device sdb1): disk space caching is enabled
[ 3660.395014] BTRFS info (device sdb1): has skinny extents
[ 3660.395733] BTRFS error (device sdb1): failed to read chunk root
[ 3660.404212] BTRFS error (device sdb1): open_ctree failed
[ 4073.476657] BTRFS info (device nvme0n1p1): turning on discard
[ 4073.476658] BTRFS info (device nvme0n1p1): disk space caching is enabled
[ 4073.476659] BTRFS info (device nvme0n1p1): has skinny extents
[ 4073.478054] BTRFS info (device nvme0n1p1): enabling ssd optimizations

[-- Attachment #5: Type: text/plain, Size: 2 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread