[PATCH] drm/fsl-dcu: Fix endian issue when using clk_register_divider

[PATCH] drm/fsl-dcu: Fix endian issue when using clk_register_divider

[Meng Yi]

While clk_register_divider will write register as little endian,
Modified the param "shift" from 0 to 24 since DCU is big endian.
Or reg "DCU_DIV_RATIO" will be seted as a incorrect value which
will cause vblank timing issue etc.

Signed-off-by: Meng Yi <meng.yi@nxp.com>
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 7882387..2c1e2f9 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -386,7 +386,7 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
 	snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix", pix_clk_in_name);
 	fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
 			pix_clk_in_name, 0, base + DCU_DIV_RATIO,
-			0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
+			24, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
 	if (IS_ERR(fsl_dev->pix_clk)) {
 		dev_err(dev, "failed to register pix clk\n");
 		ret = PTR_ERR(fsl_dev->pix_clk);
-- 
2.1.0.27.g96db324

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

RE: [PATCH] drm/fsl-dcu: Fix endian issue when using clk_register_divider

[Meng Yi]

>  	fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
>  			pix_clk_in_name, 0, base + DCU_DIV_RATIO,
> -			0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
> +			24, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);

Tested-by: Meng Yi <meng.yi@nxp.com>

On LS1021A-TWR board.

>  	if (IS_ERR(fsl_dev->pix_clk)) {
>  		dev_err(dev, "failed to register pix clk\n");
>  		ret = PTR_ERR(fsl_dev->pix_clk);

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

RE: [PATCH] drm/fsl-dcu: Fix endian issue when using clk_register_divider

[Stefan Agner]

On 2016-08-22 00:13, Meng Yi wrote:
>>  	fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
>>  			pix_clk_in_name, 0, base + DCU_DIV_RATIO,
>> -			0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
>> +			24, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
> 
> Tested-by: Meng Yi <meng.yi@nxp.com>
> 
> On LS1021A-TWR board.

Yeah I wanted to give this a try on Vybrid, but I don't think that works
since on Vybrid the IP is little endian...

We need to come up with a solution which takes that into account.
Alternatively we can put the offset into the SoC specific structure...

--
Stefan

> 
>>  	if (IS_ERR(fsl_dev->pix_clk)) {
>>  		dev_err(dev, "failed to register pix clk\n");
>>  		ret = PTR_ERR(fsl_dev->pix_clk);
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

RE: [PATCH] drm/fsl-dcu: Fix endian issue when using clk_register_divider

[Meng Yi]

> >>  	fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
> >>  			pix_clk_in_name, 0, base + DCU_DIV_RATIO,
> >> -			0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
> >> +			24, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
> >
> > Tested-by: Meng Yi <meng.yi@nxp.com>
> >
> > On LS1021A-TWR board.
> 
> Yeah I wanted to give this a try on Vybrid, but I don't think that works since on
> Vybrid the IP is little endian...
> 
> We need to come up with a solution which takes that into account.
> Alternatively we can put the offset into the SoC specific structure...
> 
Ok, I will do this these days.

Best Regards,
Meng
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

RE: [PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider

[Stefan Agner]

On 2016-09-05 01:46, Meng Yi wrote:
>> Subject: [PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider
>>
>> Since using clk_register_divider to setup the pixel clock, regmap is no longer
>> used. Regmap did take care of DCU using different endianness. Check
>> endianness using the device-tree property "big-endian" to determine the
>> location of DIV_RATIO.
>>
>> Cc: stable@vger.kernel.org
>> Fixes: 2d701449bce1 ("drm/fsl-dcu: use common clock framework for pixel
>> clock divider")
>> Reported-by: Meng Yi <meng.yi@nxp.com>
>> Signed-off-by: Stefan Agner <stefan@agner.ch>

<snip>

> 
> Tested-by: Meng Yi <meng.yi@nxp.com>
> On LS1021A-TWR board.

Thanks, applied!

--
Stefan

RE: [PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider

[Stefan Agner]

On 2016-09-05 01:46, Meng Yi wrote:
>> Subject: [PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider
>>
>> Since using clk_register_divider to setup the pixel clock, regmap is no longer
>> used. Regmap did take care of DCU using different endianness. Check
>> endianness using the device-tree property "big-endian" to determine the
>> location of DIV_RATIO.
>>
>> Cc: stable@vger.kernel.org
>> Fixes: 2d701449bce1 ("drm/fsl-dcu: use common clock framework for pixel
>> clock divider")
>> Reported-by: Meng Yi <meng.yi@nxp.com>
>> Signed-off-by: Stefan Agner <stefan@agner.ch>

<snip>

> 
> Tested-by: Meng Yi <meng.yi@nxp.com>
> On LS1021A-TWR board.

Thanks, applied!

--
Stefan
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

RE: [PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider

[Meng Yi]

> Subject: [PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider
> 
> Since using clk_register_divider to setup the pixel clock, regmap is no longer
> used. Regmap did take care of DCU using different endianness. Check
> endianness using the device-tree property "big-endian" to determine the
> location of DIV_RATIO.
> 
> Cc: stable@vger.kernel.org
> Fixes: 2d701449bce1 ("drm/fsl-dcu: use common clock framework for pixel
> clock divider")
> Reported-by: Meng Yi <meng.yi@nxp.com>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-
> dcu/fsl_dcu_drm_drv.c
> index 7882387..8dd042e 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> @@ -330,6 +330,7 @@ static int fsl_dcu_drm_probe(struct platform_device
> *pdev)
>  	const char *pix_clk_in_name;
>  	const struct of_device_id *id;
>  	int ret;
> +	u8 div_ratio_shift = 0;
> 
>  	fsl_dev = devm_kzalloc(dev, sizeof(*fsl_dev), GFP_KERNEL);
>  	if (!fsl_dev)
> @@ -382,11 +383,15 @@ static int fsl_dcu_drm_probe(struct platform_device
> *pdev)
>  		pix_clk_in = fsl_dev->clk;
>  	}
> 
> +	if (of_property_read_bool(dev->of_node, "big-endian"))
> +		div_ratio_shift = 24;
> +
> +
>  	pix_clk_in_name = __clk_get_name(pix_clk_in);
>  	snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix",
> pix_clk_in_name);
>  	fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
>  			pix_clk_in_name, 0, base + DCU_DIV_RATIO,
> -			0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
> +			div_ratio_shift, 8, CLK_DIVIDER_ROUND_CLOSEST,
> NULL);
>  	if (IS_ERR(fsl_dev->pix_clk)) {
>  		dev_err(dev, "failed to register pix clk\n");
>  		ret = PTR_ERR(fsl_dev->pix_clk);
> --
> 2.9.0

Tested-by: Meng Yi <meng.yi@nxp.com>
On LS1021A-TWR board.

Meng

RE: [PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider

[Meng Yi]

> Subject: [PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider
> 
> Since using clk_register_divider to setup the pixel clock, regmap is no longer
> used. Regmap did take care of DCU using different endianness. Check
> endianness using the device-tree property "big-endian" to determine the
> location of DIV_RATIO.
> 
> Cc: stable@vger.kernel.org
> Fixes: 2d701449bce1 ("drm/fsl-dcu: use common clock framework for pixel
> clock divider")
> Reported-by: Meng Yi <meng.yi@nxp.com>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-
> dcu/fsl_dcu_drm_drv.c
> index 7882387..8dd042e 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> @@ -330,6 +330,7 @@ static int fsl_dcu_drm_probe(struct platform_device
> *pdev)
>  	const char *pix_clk_in_name;
>  	const struct of_device_id *id;
>  	int ret;
> +	u8 div_ratio_shift = 0;
> 
>  	fsl_dev = devm_kzalloc(dev, sizeof(*fsl_dev), GFP_KERNEL);
>  	if (!fsl_dev)
> @@ -382,11 +383,15 @@ static int fsl_dcu_drm_probe(struct platform_device
> *pdev)
>  		pix_clk_in = fsl_dev->clk;
>  	}
> 
> +	if (of_property_read_bool(dev->of_node, "big-endian"))
> +		div_ratio_shift = 24;
> +
> +
>  	pix_clk_in_name = __clk_get_name(pix_clk_in);
>  	snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix",
> pix_clk_in_name);
>  	fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
>  			pix_clk_in_name, 0, base + DCU_DIV_RATIO,
> -			0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
> +			div_ratio_shift, 8, CLK_DIVIDER_ROUND_CLOSEST,
> NULL);
>  	if (IS_ERR(fsl_dev->pix_clk)) {
>  		dev_err(dev, "failed to register pix clk\n");
>  		ret = PTR_ERR(fsl_dev->pix_clk);
> --
> 2.9.0

Tested-by: Meng Yi <meng.yi@nxp.com>
On LS1021A-TWR board.

Meng

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider

[Stefan Agner]

Since using clk_register_divider to setup the pixel clock, regmap
is no longer used. Regmap did take care of DCU using different
endianness. Check endianness using the device-tree property
"big-endian" to determine the location of DIV_RATIO.

Cc: stable@vger.kernel.org
Fixes: 2d701449bce1 ("drm/fsl-dcu: use common clock framework for pixel clock divider")
Reported-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 7882387..8dd042e 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -330,6 +330,7 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
 	const char *pix_clk_in_name;
 	const struct of_device_id *id;
 	int ret;
+	u8 div_ratio_shift = 0;
 
 	fsl_dev = devm_kzalloc(dev, sizeof(*fsl_dev), GFP_KERNEL);
 	if (!fsl_dev)
@@ -382,11 +383,15 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
 		pix_clk_in = fsl_dev->clk;
 	}
 
+	if (of_property_read_bool(dev->of_node, "big-endian"))
+		div_ratio_shift = 24;
+
+
 	pix_clk_in_name = __clk_get_name(pix_clk_in);
 	snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix", pix_clk_in_name);
 	fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
 			pix_clk_in_name, 0, base + DCU_DIV_RATIO,
-			0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
+			div_ratio_shift, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
 	if (IS_ERR(fsl_dev->pix_clk)) {
 		dev_err(dev, "failed to register pix clk\n");
 		ret = PTR_ERR(fsl_dev->pix_clk);
-- 
2.9.0

[PATCH] drm/fsl-dcu: fix endian issue when using clk_register_divider

[Stefan Agner]

Since using clk_register_divider to setup the pixel clock, regmap
is no longer used. Regmap did take care of DCU using different
endianness. Check endianness using the device-tree property
"big-endian" to determine the location of DIV_RATIO.

Cc: stable@vger.kernel.org
Fixes: 2d701449bce1 ("drm/fsl-dcu: use common clock framework for pixel clock divider")
Reported-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 7882387..8dd042e 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -330,6 +330,7 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
 	const char *pix_clk_in_name;
 	const struct of_device_id *id;
 	int ret;
+	u8 div_ratio_shift = 0;
 
 	fsl_dev = devm_kzalloc(dev, sizeof(*fsl_dev), GFP_KERNEL);
 	if (!fsl_dev)
@@ -382,11 +383,15 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
 		pix_clk_in = fsl_dev->clk;
 	}
 
+	if (of_property_read_bool(dev->of_node, "big-endian"))
+		div_ratio_shift = 24;
+
+
 	pix_clk_in_name = __clk_get_name(pix_clk_in);
 	snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix", pix_clk_in_name);
 	fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
 			pix_clk_in_name, 0, base + DCU_DIV_RATIO,
-			0, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
+			div_ratio_shift, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
 	if (IS_ERR(fsl_dev->pix_clk)) {
 		dev_err(dev, "failed to register pix clk\n");
 		ret = PTR_ERR(fsl_dev->pix_clk);
-- 
2.9.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel