All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robin Gong <yibin.gong@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
	"vkoul@kernel.org" <vkoul@kernel.org>,
	"dan.j.williams@intel.com" <dan.j.williams@intel.com>,
	"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
	"linux@armlinux.org.uk" <linux@armlinux.org.uk>
Cc: "dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [v3,3/3] dmaengine: imx-sdma: allocate max 20 bds for one transfer
Date: Mon, 23 Jul 2018 13:55:47 +0000	[thread overview]
Message-ID: <DB6PR04MB322323354B2184421502FC5889560@DB6PR04MB3223.eurprd04.prod.outlook.com> (raw)

PiAtLS0tLU9yaWdpbmFsIE1lc3NhZ2UtLS0tLQ0KPiBGcm9tOiBMdWNhcyBTdGFjaCBbbWFpbHRv
Omwuc3RhY2hAcGVuZ3V0cm9uaXguZGVdDQo+IFNlbnQ6IDIwMTjlubQ35pyIMjPml6UgMTg6NTQN
Cj4gVG86IFJvYmluIEdvbmcgPHlpYmluLmdvbmdAbnhwLmNvbT47IHZrb3VsQGtlcm5lbC5vcmc7
DQo+IGRhbi5qLndpbGxpYW1zQGludGVsLmNvbTsgcy5oYXVlckBwZW5ndXRyb25peC5kZTsgbGlu
dXhAYXJtbGludXgub3JnLnVrDQo+IENjOiBkbWFlbmdpbmVAdmdlci5rZXJuZWwub3JnOyBkbC1s
aW51eC1pbXggPGxpbnV4LWlteEBueHAuY29tPjsNCj4ga2VybmVsQHBlbmd1dHJvbml4LmRlOyBs
aW51eC1hcm0ta2VybmVsQGxpc3RzLmluZnJhZGVhZC5vcmc7DQo+IGxpbnV4LWtlcm5lbEB2Z2Vy
Lmtlcm5lbC5vcmcNCj4gU3ViamVjdDogUmU6IFtQQVRDSCB2MyAzLzNdIGRtYWVuZ2luZTogaW14
LXNkbWE6IGFsbG9jYXRlIG1heCAyMCBiZHMgZm9yIG9uZQ0KPiB0cmFuc2Zlcg0KPiANCj4gQW0g
RGllbnN0YWcsIGRlbiAyNC4wNy4yMDE4LCAwMTo0NiArMDgwMCBzY2hyaWViIFJvYmluIEdvbmc6
DQo+ID4gSWYgbXVsdGktYmRzIHVzZWQgaW4gb25lIHRyYW5zZmVyLCBhbGwgYmRzIHNob3VsZCBi
ZSBjb25zaXN0ZW4NCj4gPiBtZW1vcnkuVG8gZWFzaWx5IGZvbGxvdyBpdCwgZW5sYXJnZSB0aGUg
ZG1hIHBvb2wgc2l6ZSBpbnRvIDIwIGJkcywgYW5kDQo+ID4gaXQgd2lsbCByZXBvcnQgZXJyb3Ig
aWYgdGhlIG51bWJlciBvZiBiZHMgaXMgb3ZlciB0aGFuIDIwLiBGb3INCj4gPiBkbWF0ZXN0LCB0
aGUgbWF4IGNvdW50IGZvciBzaW5nbGUgdHJhbnNmZXIgaXMgTlVNX0JEICoNCj4gU0RNQV9CRF9N
QVhfQ05UDQo+ID4gPSAyMCAqIDY1NTM1ID0gfjEuMjhNQi4NCj4gDQo+IEJvdGggdGhlIGNvbW1p
dCBtZXNzYWdlIGFuZCB0aGUgY29tbWVudCBuZWVkIGEgbG90IG1vcmUgY2FyZSB0byBhY3R1YWxs
eQ0KPiB0ZWxsIHdoYXQgdGhpcyBjb21taXQgaXMgdHJ5aW5nIHRvIGFjaGlldmUuIEN1cnJlbnRs
eSBJIGRvbid0IGZvbGxvdyBhdCBhbGwuIFdoYXQNCj4gZG9lcyAiY29uc2lzdGVuIiBtZWFuPyBE
byB5b3UgbWVhbiBCRHMgc2hvdWxkIGJlIGNvbnRpZ3VvdXMgaW4gbWVtb3J5Pw0KWWVzLCBCRHMg
c2hvdWxkIGJlIGNvbnRpZ3VvdXMgIG9uZSBieSBvbmUgaW4gbWVtb3J5Lg0KPiANCj4gV2hhdCBk
byB5b3UgZ2FpbiBieSBvdmVyLWFsbG9jYXRpbmcgZWFjaCBCRCBieSBhIGZhY3RvciBvZiAyMD8N
CkkgZ3Vlc3MgZG1hX3Bvb2xfYWxsb2Mgd2lsbCByZXR1cm4gZXJyb3IgaW4gc3VjaCBjYXNlLCBh
bmQgdGhlbiBjYXVzZSBkbWEgc2V0dXANCnRyYW5zZmVyIGZhaWx1cmUuDQo+IA0KPiBSZWdhcmRz
LA0KPiBMdWNhcw0KPiANCj4gPiBTaWduZWQtb2ZmLWJ5OiBSb2JpbiBHb25nIDx5aWJpbi5nb25n
QG54cC5jb20+DQo+ID4gLS0tDQo+ID4gwqBkcml2ZXJzL2RtYS9pbXgtc2RtYS5jIHwgMTcgKysr
KysrKysrKysrKysrKy0NCj4gPiDCoDEgZmlsZSBjaGFuZ2VkLCAxNiBpbnNlcnRpb25zKCspLCAx
IGRlbGV0aW9uKC0pDQo+ID4NCj4gPiBkaWZmIC0tZ2l0IGEvZHJpdmVycy9kbWEvaW14LXNkbWEu
YyBiL2RyaXZlcnMvZG1hL2lteC1zZG1hLmMgaW5kZXgNCj4gPiBiNGVjMmQyLi41OTczNDg5IDEw
MDY0NA0KPiA+IC0tLSBhL2RyaXZlcnMvZG1hL2lteC1zZG1hLmMNCj4gPiArKysgYi9kcml2ZXJz
L2RtYS9pbXgtc2RtYS5jDQo+ID4gQEAgLTI5OCw2ICsyOTgsMTUgQEAgc3RydWN0IHNkbWFfY29u
dGV4dF9kYXRhIHsNCj4gPiA+IMKgCXUzMsKgwqBzY3JhdGNoNzsNCj4gPiDCoH0gX19hdHRyaWJ1
dGVfXyAoKHBhY2tlZCkpOw0KPiA+DQo+ID4gKy8qDQo+ID4gKyAqIEFsbCBiZHMgaW4gb25lIHRy
YW5zZmVyIHNob3VsZCBiZSBjb25zaXRlbnQgb24gU0RNQS4gVG8gZWFzaWx5DQo+ID4gK2ZvbGxv
dyBpdCxqdXN0DQo+ID4gKyAqIHNldCB0aGUgZG1hIHBvb2wgc2l6ZSBhcyB0aGUgZW5vdWdoIGJk
cy4gRm9yIGV4YW1wbGUsIGluIGRtYXRlc3QNCj4gPiArY2FzZSwgdGhlDQo+ID4gKyAqIG1heCAy
MCBiZHMgbWVhbnMgdGhlIG1heCBmb3Igc2luZ2xlIHRyYW5zZmVyIGlzIE5VTV9CRCAqDQo+ID4g
K1NETUFfQkRfTUFYX0NOVCA9IDIwDQo+ID4gKyAqICogNjU1MzUgPSB+MS4yOE1CLiAyMCBiZHMg
c3VwcG9zZWQgdG8gYmUgZW5vdWdoIGJhc2ljYWxseS5JZiBpdCdzDQo+ID4gK3N0aWxsIG5vdA0K
PiA+ICsgKiBlbm91Z2ggaW4gc29tZSBzcGVjaWZpYyBjYXNlcywgZW5sYXJnZSBpdCBoZXJlLldh
cm5pbmcgbWVzc2FnZQ0KPiA+ICt3b3VsZCBhbHNvDQo+ID4gKyAqIGFwcGVhciBpZiB0aGUgYmQg
bnVtYmVycyBpcyBvdmVyIHRoYW4gMjAuDQo+ID4gKyAqLw0KPiA+ICsjZGVmaW5lIE5VTV9CRCAy
MA0KPiA+DQo+ID4gwqBzdHJ1Y3Qgc2RtYV9lbmdpbmU7DQo+ID4NCj4gPiBAQCAtMTI3Myw3ICsx
MjgyLDcgQEAgc3RhdGljIGludCBzZG1hX2FsbG9jX2NoYW5fcmVzb3VyY2VzKHN0cnVjdA0KPiA+
IGRtYV9jaGFuICpjaGFuKQ0KPiA+ID4gwqAJCWdvdG8gZGlzYWJsZV9jbGtfYWhiOw0KPiA+DQo+
ID4gPiDCoAlzZG1hYy0+YmRfcG9vbCA9IGRtYV9wb29sX2NyZWF0ZSgiYmRfcG9vbCIsIGNoYW4t
PmRldmljZS0+ZGV2LA0KPiA+ID4gLQkJCQlzaXplb2Yoc3RydWN0IHNkbWFfYnVmZmVyX2Rlc2Ny
aXB0b3IpLA0KPiA+ID4gKwkJCQlOVU1fQkQgKiBzaXplb2Yoc3RydWN0IHNkbWFfYnVmZmVyX2Rl
c2NyaXB0b3IpLA0KPiA+ID4gwqAJCQkJMzIsIDApOw0KPiA+DQo+ID4gPiDCoAlyZXR1cm4gMDsN
Cj4gPiBAQCAtMTMxNCw2ICsxMzIzLDEyIEBAIHN0YXRpYyBzdHJ1Y3Qgc2RtYV9kZXNjDQo+ID4g
KnNkbWFfdHJhbnNmZXJfaW5pdChzdHJ1Y3Qgc2RtYV9jaGFubmVsICpzZG1hYywNCj4gPiDCoHsN
Cj4gPiA+IMKgCXN0cnVjdCBzZG1hX2Rlc2MgKmRlc2M7DQo+ID4NCj4gPiA+ICsJaWYgKGJkcyA+
IE5VTV9CRCkgew0KPiA+ID4gKwkJZGV2X2VycihzZG1hYy0+c2RtYS0+ZGV2LCAiJWQgYmRzIGV4
Y2VlZCB0aGUgbWF4ICVkXG4iLA0KPiA+ID4gKwkJCWJkcywgTlVNX0JEKTsNCj4gPiA+ICsJCWdv
dG8gZXJyX291dDsNCj4gPiA+ICsJfQ0KPiA+ICsNCj4gPiA+IMKgCWRlc2MgPSBremFsbG9jKChz
aXplb2YoKmRlc2MpKSwgR0ZQX05PV0FJVCk7DQo+ID4gPiDCoAlpZiAoIWRlc2MpDQo+ID4gPiDC
oAkJZ290byBlcnJfb3V0Ow0K
---
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Robin Gong <yibin.gong@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
	"vkoul@kernel.org" <vkoul@kernel.org>,
	"dan.j.williams@intel.com" <dan.j.williams@intel.com>,
	"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
	"linux@armlinux.org.uk" <linux@armlinux.org.uk>
Cc: "dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH v3 3/3] dmaengine: imx-sdma: allocate max 20 bds for one transfer
Date: Mon, 23 Jul 2018 13:55:47 +0000	[thread overview]
Message-ID: <DB6PR04MB322323354B2184421502FC5889560@DB6PR04MB3223.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <1532343252.3163.99.camel@pengutronix.de>

> -----Original Message-----
> From: Lucas Stach [mailto:l.stach@pengutronix.de]
> Sent: 2018年7月23日 18:54
> To: Robin Gong <yibin.gong@nxp.com>; vkoul@kernel.org;
> dan.j.williams@intel.com; s.hauer@pengutronix.de; linux@armlinux.org.uk
> Cc: dmaengine@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>;
> kernel@pengutronix.de; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v3 3/3] dmaengine: imx-sdma: allocate max 20 bds for one
> transfer
> 
> Am Dienstag, den 24.07.2018, 01:46 +0800 schrieb Robin Gong:
> > If multi-bds used in one transfer, all bds should be consisten
> > memory.To easily follow it, enlarge the dma pool size into 20 bds, and
> > it will report error if the number of bds is over than 20. For
> > dmatest, the max count for single transfer is NUM_BD *
> SDMA_BD_MAX_CNT
> > = 20 * 65535 = ~1.28MB.
> 
> Both the commit message and the comment need a lot more care to actually
> tell what this commit is trying to achieve. Currently I don't follow at all. What
> does "consisten" mean? Do you mean BDs should be contiguous in memory?
Yes, BDs should be contiguous  one by one in memory.
> 
> What do you gain by over-allocating each BD by a factor of 20?
I guess dma_pool_alloc will return error in such case, and then cause dma setup
transfer failure.
> 
> Regards,
> Lucas
> 
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> >  drivers/dma/imx-sdma.c | 17 ++++++++++++++++-
> >  1 file changed, 16 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index
> > b4ec2d2..5973489 100644
> > --- a/drivers/dma/imx-sdma.c
> > +++ b/drivers/dma/imx-sdma.c
> > @@ -298,6 +298,15 @@ struct sdma_context_data {
> > >  	u32  scratch7;
> >  } __attribute__ ((packed));
> >
> > +/*
> > + * All bds in one transfer should be consitent on SDMA. To easily
> > +follow it,just
> > + * set the dma pool size as the enough bds. For example, in dmatest
> > +case, the
> > + * max 20 bds means the max for single transfer is NUM_BD *
> > +SDMA_BD_MAX_CNT = 20
> > + * * 65535 = ~1.28MB. 20 bds supposed to be enough basically.If it's
> > +still not
> > + * enough in some specific cases, enlarge it here.Warning message
> > +would also
> > + * appear if the bd numbers is over than 20.
> > + */
> > +#define NUM_BD 20
> >
> >  struct sdma_engine;
> >
> > @@ -1273,7 +1282,7 @@ static int sdma_alloc_chan_resources(struct
> > dma_chan *chan)
> > >  		goto disable_clk_ahb;
> >
> > >  	sdmac->bd_pool = dma_pool_create("bd_pool", chan->device->dev,
> > > -				sizeof(struct sdma_buffer_descriptor),
> > > +				NUM_BD * sizeof(struct sdma_buffer_descriptor),
> > >  				32, 0);
> >
> > >  	return 0;
> > @@ -1314,6 +1323,12 @@ static struct sdma_desc
> > *sdma_transfer_init(struct sdma_channel *sdmac,
> >  {
> > >  	struct sdma_desc *desc;
> >
> > > +	if (bds > NUM_BD) {
> > > +		dev_err(sdmac->sdma->dev, "%d bds exceed the max %d\n",
> > > +			bds, NUM_BD);
> > > +		goto err_out;
> > > +	}
> > +
> > >  	desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
> > >  	if (!desc)
> > >  		goto err_out;

WARNING: multiple messages have this Message-ID (diff)
From: yibin.gong@nxp.com (Robin Gong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/3] dmaengine: imx-sdma: allocate max 20 bds for one transfer
Date: Mon, 23 Jul 2018 13:55:47 +0000	[thread overview]
Message-ID: <DB6PR04MB322323354B2184421502FC5889560@DB6PR04MB3223.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <1532343252.3163.99.camel@pengutronix.de>

> -----Original Message-----
> From: Lucas Stach [mailto:l.stach at pengutronix.de]
> Sent: 2018?7?23? 18:54
> To: Robin Gong <yibin.gong@nxp.com>; vkoul at kernel.org;
> dan.j.williams at intel.com; s.hauer at pengutronix.de; linux at armlinux.org.uk
> Cc: dmaengine at vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>;
> kernel at pengutronix.de; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org
> Subject: Re: [PATCH v3 3/3] dmaengine: imx-sdma: allocate max 20 bds for one
> transfer
> 
> Am Dienstag, den 24.07.2018, 01:46 +0800 schrieb Robin Gong:
> > If multi-bds used in one transfer, all bds should be consisten
> > memory.To easily follow it, enlarge the dma pool size into 20 bds, and
> > it will report error if the number of bds is over than 20. For
> > dmatest, the max count for single transfer is NUM_BD *
> SDMA_BD_MAX_CNT
> > = 20 * 65535 = ~1.28MB.
> 
> Both the commit message and the comment need a lot more care to actually
> tell what this commit is trying to achieve. Currently I don't follow at all. What
> does "consisten" mean? Do you mean BDs should be contiguous in memory?
Yes, BDs should be contiguous  one by one in memory.
> 
> What do you gain by over-allocating each BD by a factor of 20?
I guess dma_pool_alloc will return error in such case, and then cause dma setup
transfer failure.
> 
> Regards,
> Lucas
> 
> > Signed-off-by: Robin Gong <yibin.gong@nxp.com>
> > ---
> > ?drivers/dma/imx-sdma.c | 17 ++++++++++++++++-
> > ?1 file changed, 16 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index
> > b4ec2d2..5973489 100644
> > --- a/drivers/dma/imx-sdma.c
> > +++ b/drivers/dma/imx-sdma.c
> > @@ -298,6 +298,15 @@ struct sdma_context_data {
> > > ?	u32??scratch7;
> > ?} __attribute__ ((packed));
> >
> > +/*
> > + * All bds in one transfer should be consitent on SDMA. To easily
> > +follow it,just
> > + * set the dma pool size as the enough bds. For example, in dmatest
> > +case, the
> > + * max 20 bds means the max for single transfer is NUM_BD *
> > +SDMA_BD_MAX_CNT = 20
> > + * * 65535 = ~1.28MB. 20 bds supposed to be enough basically.If it's
> > +still not
> > + * enough in some specific cases, enlarge it here.Warning message
> > +would also
> > + * appear if the bd numbers is over than 20.
> > + */
> > +#define NUM_BD 20
> >
> > ?struct sdma_engine;
> >
> > @@ -1273,7 +1282,7 @@ static int sdma_alloc_chan_resources(struct
> > dma_chan *chan)
> > > ?		goto disable_clk_ahb;
> >
> > > ?	sdmac->bd_pool = dma_pool_create("bd_pool", chan->device->dev,
> > > -				sizeof(struct sdma_buffer_descriptor),
> > > +				NUM_BD * sizeof(struct sdma_buffer_descriptor),
> > > ?				32, 0);
> >
> > > ?	return 0;
> > @@ -1314,6 +1323,12 @@ static struct sdma_desc
> > *sdma_transfer_init(struct sdma_channel *sdmac,
> > ?{
> > > ?	struct sdma_desc *desc;
> >
> > > +	if (bds > NUM_BD) {
> > > +		dev_err(sdmac->sdma->dev, "%d bds exceed the max %d\n",
> > > +			bds, NUM_BD);
> > > +		goto err_out;
> > > +	}
> > +
> > > ?	desc = kzalloc((sizeof(*desc)), GFP_NOWAIT);
> > > ?	if (!desc)
> > > ?		goto err_out;

             reply	other threads:[~2018-07-23 13:55 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-23 13:55 Robin Gong [this message]
2018-07-23 13:55 ` [PATCH v3 3/3] dmaengine: imx-sdma: allocate max 20 bds for one transfer Robin Gong
2018-07-23 13:55 ` Robin Gong
  -- strict thread matches above, loose matches on Subject: below --
2018-08-06 12:29 [v3,3/3] " Lucas Stach
2018-08-06 12:29 ` [PATCH v3 3/3] " Lucas Stach
2018-08-06 12:29 ` Lucas Stach
2018-08-06  8:04 [v3,3/3] " Robin Gong
2018-08-06  8:04 ` [PATCH v3 3/3] " Robin Gong
2018-08-06  8:04 ` Robin Gong
2018-07-30  5:04 [v3,2/3] dmaengine: imx-sdma: add memcpy interface Vinod Koul
2018-07-30  5:04 ` [PATCH v3 2/3] " Vinod
2018-07-30  5:04 ` Vinod
2018-07-30  5:04 [v3,1/3] dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff' Vinod Koul
2018-07-30  5:04 ` [PATCH v3 1/3] " Vinod
2018-07-30  5:04 ` Vinod
2018-07-25  1:24 [v3,3/3] dmaengine: imx-sdma: allocate max 20 bds for one transfer Robin Gong
2018-07-25  1:24 ` [PATCH v3 3/3] " Robin Gong
2018-07-25  1:24 ` Robin Gong
2018-07-24  9:22 [v3,3/3] " Lucas Stach
2018-07-24  9:22 ` [PATCH v3 3/3] " Lucas Stach
2018-07-24  9:22 ` Lucas Stach
2018-07-23 17:46 [v3,3/3] " Robin Gong
2018-07-23 17:46 ` [PATCH v3 3/3] " Robin Gong
2018-07-23 17:46 ` Robin Gong
2018-07-23 17:46 [v3,2/3] dmaengine: imx-sdma: add memcpy interface Robin Gong
2018-07-23 17:46 ` [PATCH v3 2/3] " Robin Gong
2018-07-23 17:46 ` Robin Gong
2018-07-23 17:46 [v3,1/3] dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff' Robin Gong
2018-07-23 17:46 ` [PATCH v3 1/3] " Robin Gong
2018-07-23 17:46 ` Robin Gong
2018-07-23 17:46 [PATCH v3 0/3] add memcpy support for sdma Robin Gong
2018-07-23 17:46 ` Robin Gong
2018-07-23 10:54 [v3,3/3] dmaengine: imx-sdma: allocate max 20 bds for one transfer Lucas Stach
2018-07-23 10:54 ` [PATCH v3 3/3] " Lucas Stach
2018-07-23 10:54 ` Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DB6PR04MB322323354B2184421502FC5889560@DB6PR04MB3223.eurprd04.prod.outlook.com \
    --to=yibin.gong@nxp.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=s.hauer@pengutronix.de \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.