* [PATCH V2 1/9] aacraid: SCSI blk tag support
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 2/9] aacraid: Fix RRQ overload Raghava Aditya Renukunta
` (7 subsequent siblings)
8 siblings, 0 replies; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
The method to allocate and free FIB's in the present code utilizes
spinlocks.Multiple IO's have to wait on the spinlock to acquire or
free fibs creating a performance bottleneck.
An alternative solution would be to use block layer tags to keep track
of the fibs allocated and freed. To this end aac_fib_alloc_tag was
created to utilize the blk layer tags to plug into the Fib pool.These
functions are used exclusively in the IO path. 8 fibs are reserved for
the use of AIF management software and utilize the previous spinlock based
implementations.
Changes in V2:
Removed aac_fib_free_tag since it was a stub function
Moved population of fib fields that are constant to aac_fib_setup
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@pmcs.com>
---
drivers/scsi/aacraid/aachba.c | 27 ++++++++++++---------------
drivers/scsi/aacraid/aacraid.h | 1 +
drivers/scsi/aacraid/commsup.c | 32 +++++++++++++++++++++++++++++---
drivers/scsi/aacraid/dpcsup.c | 2 --
drivers/scsi/aacraid/linit.c | 2 ++
5 files changed, 44 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index e4c2437..7dfd0fa 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -323,7 +323,6 @@ static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
if (unlikely(!scsicmd || !scsicmd->scsi_done)) {
dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"));
aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
return 0;
}
scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
@@ -331,7 +330,6 @@ static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
if (unlikely(!device || !scsi_device_online(device))) {
dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
return 0;
}
return 1;
@@ -541,7 +539,6 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
scsicmd->scsi_done(scsicmd);
}
@@ -557,7 +554,8 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
- if (!(cmd_fibcontext = aac_fib_alloc(dev)))
+ cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+ if (!cmd_fibcontext)
return -ENOMEM;
aac_fib_init(cmd_fibcontext);
@@ -586,7 +584,6 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
aac_fib_complete(cmd_fibcontext);
- aac_fib_free(cmd_fibcontext);
return -1;
}
@@ -1024,7 +1021,6 @@ static void get_container_serial_callback(void *context, struct fib * fibptr)
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
scsicmd->scsi_done(scsicmd);
}
@@ -1040,7 +1036,8 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
- if (!(cmd_fibcontext = aac_fib_alloc(dev)))
+ cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+ if (!cmd_fibcontext)
return -ENOMEM;
aac_fib_init(cmd_fibcontext);
@@ -1068,7 +1065,6 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status);
aac_fib_complete(cmd_fibcontext);
- aac_fib_free(cmd_fibcontext);
return -1;
}
@@ -1869,7 +1865,6 @@ static void io_callback(void *context, struct fib * fibptr)
break;
}
aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
scsicmd->scsi_done(scsicmd);
}
@@ -1954,7 +1949,8 @@ static int aac_read(struct scsi_cmnd * scsicmd)
/*
* Alocate and initialize a Fib
*/
- if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+ cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+ if (!cmd_fibcontext) {
printk(KERN_WARNING "aac_read: fib allocation failed\n");
return -1;
}
@@ -2051,7 +2047,8 @@ static int aac_write(struct scsi_cmnd * scsicmd)
/*
* Allocate and initialize a Fib then setup a BlockWrite command
*/
- if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+ cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+ if (!cmd_fibcontext) {
/* FIB temporarily unavailable,not catastrophic failure */
/* scsicmd->result = DID_ERROR << 16;
@@ -2285,7 +2282,7 @@ static int aac_start_stop(struct scsi_cmnd *scsicmd)
/*
* Allocate and initialize a Fib
*/
- cmd_fibcontext = aac_fib_alloc(aac);
+ cmd_fibcontext = aac_fib_alloc_tag(aac, scsicmd);
if (!cmd_fibcontext)
return SCSI_MLQUEUE_HOST_BUSY;
@@ -3157,7 +3154,6 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
aac_fib_complete(fibptr);
- aac_fib_free(fibptr);
scsicmd->scsi_done(scsicmd);
}
@@ -3187,9 +3183,10 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
/*
* Allocate and initialize a Fib then setup a BlockWrite command
*/
- if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+ cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+ if (!cmd_fibcontext)
return -1;
- }
+
status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
/*
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 074878b..f51f0a0 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2114,6 +2114,7 @@ int aac_acquire_irq(struct aac_dev *dev);
void aac_free_irq(struct aac_dev *dev);
const char *aac_driverinfo(struct Scsi_Host *);
struct fib *aac_fib_alloc(struct aac_dev *dev);
+struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd);
int aac_fib_setup(struct aac_dev *dev);
void aac_fib_map_free(struct aac_dev *dev);
void aac_fib_free(struct fib * context);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index a1f90fe..6b286b3 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -137,6 +137,7 @@ int aac_fib_setup(struct aac_dev * dev)
i++, fibptr++)
{
fibptr->flags = 0;
+ fibptr->size = sizeof(struct fib);
fibptr->dev = dev;
fibptr->hw_fib_va = hw_fib;
fibptr->data = (void *) fibptr->hw_fib_va->data;
@@ -156,13 +157,38 @@ int aac_fib_setup(struct aac_dev * dev)
*/
dev->fibs[dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1].next = NULL;
/*
- * Enable this to debug out of queue space
- */
- dev->free_fib = &dev->fibs[0];
+ * Set 8 fibs aside for management tools
+ */
+ dev->free_fib = &dev->fibs[dev->scsi_host_ptr->can_queue];
return 0;
}
/**
+ * aac_fib_alloc_tag - allocate a fib
+ * @dev: Adapter to allocate the fib for
+ *
+ * Allocate a fib from the adapter fib pool using tags
+ * from the blk layer.
+ */
+
+struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
+{
+ struct fib *fibptr;
+
+ fibptr = &dev->fibs[scmd->request->tag];
+ /*
+ * Null out fields that depend on being zero at the start of
+ * each I/O
+ */
+ fibptr->hw_fib_va->header.XferState = 0;
+ fibptr->type = FSAFS_NTC_FIB_CONTEXT;
+ fibptr->callback_data = NULL;
+ fibptr->callback = NULL;
+
+ return fibptr;
+}
+
+/**
* aac_fib_alloc - allocate a fib
* @dev: Adapter to allocate the fib for
*
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
index da9d993..d677b52 100644
--- a/drivers/scsi/aacraid/dpcsup.c
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -394,7 +394,6 @@ unsigned int aac_intr_normal(struct aac_dev *dev, u32 index,
fib->callback(fib->callback_data, fib);
} else {
aac_fib_complete(fib);
- aac_fib_free(fib);
}
} else {
unsigned long flagv;
@@ -416,7 +415,6 @@ unsigned int aac_intr_normal(struct aac_dev *dev, u32 index,
fib->done = 0;
spin_unlock_irqrestore(&fib->event_lock, flagv);
aac_fib_complete(fib);
- aac_fib_free(fib);
}
}
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 76eaa38..129a515 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -454,6 +454,8 @@ static int aac_slave_configure(struct scsi_device *sdev)
} else
scsi_change_queue_depth(sdev, 1);
+ sdev->tagged_supported = 1;
+
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH V2 2/9] aacraid: Fix RRQ overload
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 1/9] aacraid: SCSI blk tag support Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 3/9] aacraid: Added EEH support Raghava Aditya Renukunta
` (6 subsequent siblings)
8 siblings, 0 replies; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
The driver utilizes an array of atomic variables to keep track of
IO submissions to each vector. To submit an IO multiple threads
iterate through the array to find a vector which has empty slots
to send an IO. The reading and updating of the variable is not atomic,
causing race conditions when a thread uses a full vector to
submit an IO.
Fixed by mapping each FIB to a vector, the submission path then uses
said vector to submit IO thereby removing the possibly of a race
condition.The vector assignment is started from 1 since vector 0 is
reserved for the use of AIF management FIBS.If the number of MSIx
vectors is 1 (MSI or INTx mode) then all the fibs are allocated to
vector 0.
Changes in V2:
Created function aac_fib_vector_assign to assign vector numbers to
fib and to prevent code duplication
Fixes: 495c0217 "aacraid: MSI-x support"
Cc: stable@vger.kernel.org # v4.1
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
drivers/scsi/aacraid/aacraid.h | 2 ++
drivers/scsi/aacraid/commsup.c | 28 ++++++++++++++++++++++++++++
drivers/scsi/aacraid/src.c | 30 +++++++-----------------------
3 files changed, 37 insertions(+), 23 deletions(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index f51f0a0..fff1306 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -944,6 +944,7 @@ struct fib {
*/
struct list_head fiblink;
void *data;
+ u32 vector_no;
struct hw_fib *hw_fib_va; /* Actual shared object */
dma_addr_t hw_fib_pa; /* physical address of hw_fib*/
};
@@ -2113,6 +2114,7 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
int aac_acquire_irq(struct aac_dev *dev);
void aac_free_irq(struct aac_dev *dev);
const char *aac_driverinfo(struct Scsi_Host *);
+void aac_fib_vector_assign(struct aac_dev *dev);
struct fib *aac_fib_alloc(struct aac_dev *dev);
struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd);
int aac_fib_setup(struct aac_dev *dev);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 6b286b3..e9f6e70 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -90,6 +90,28 @@ void aac_fib_map_free(struct aac_dev *dev)
dev->hw_fib_pa = 0;
}
+void aac_fib_vector_assign(struct aac_dev *dev)
+{
+ u32 i = 0;
+ u32 vector = 1;
+ struct fib *fibptr = NULL;
+
+ for (i = 0, fibptr = &dev->fibs[i];
+ i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
+ i++, fibptr++) {
+ if ((dev->max_msix == 1) ||
+ (i > ((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1)
+ - dev->vector_cap))) {
+ fibptr->vector_no = 0;
+ } else {
+ fibptr->vector_no = vector;
+ vector++;
+ if (vector == dev->max_msix)
+ vector = 1;
+ }
+ }
+}
+
/**
* aac_fib_setup - setup the fibs
* @dev: Adapter to set up
@@ -152,6 +174,12 @@ int aac_fib_setup(struct aac_dev * dev)
hw_fib_pa = hw_fib_pa +
dev->max_fib_size + sizeof(struct aac_fib_xporthdr);
}
+
+ /*
+ *Assign vector numbers to fibs
+ */
+ aac_fib_vector_assign(dev);
+
/*
* Add the fib chain to the free list
*/
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 2aa34ea..bc0203f 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -156,8 +156,8 @@ static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
break;
if (dev->msi_enabled && dev->max_msix > 1)
atomic_dec(&dev->rrq_outstanding[vector_no]);
- aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
dev->host_rrq[index++] = 0;
+ aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
if (index == (vector_no + 1) * dev->vector_cap)
index = vector_no * dev->vector_cap;
dev->host_rrq_idx[vector_no] = index;
@@ -452,36 +452,20 @@ static int aac_src_deliver_message(struct fib *fib)
#endif
u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
+ u16 vector_no;
atomic_inc(&q->numpending);
if (dev->msi_enabled && fib->hw_fib_va->header.Command != AifRequest &&
dev->max_msix > 1) {
- u_int16_t vector_no, first_choice = 0xffff;
-
- vector_no = dev->fibs_pushed_no % dev->max_msix;
- do {
- vector_no += 1;
- if (vector_no == dev->max_msix)
- vector_no = 1;
- if (atomic_read(&dev->rrq_outstanding[vector_no]) <
- dev->vector_cap)
- break;
- if (0xffff == first_choice)
- first_choice = vector_no;
- else if (vector_no == first_choice)
- break;
- } while (1);
- if (vector_no == first_choice)
- vector_no = 0;
- atomic_inc(&dev->rrq_outstanding[vector_no]);
- if (dev->fibs_pushed_no == 0xffffffff)
- dev->fibs_pushed_no = 0;
- else
- dev->fibs_pushed_no++;
+ vector_no = fib->vector_no;
fib->hw_fib_va->header.Handle += (vector_no << 16);
+ } else {
+ vector_no = 0;
}
+ atomic_inc(&dev->rrq_outstanding[vector_no]);
+
if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
/* Calculate the amount to the fibsize bits */
fibsize = (hdr_size + 127) / 128 - 1;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH V2 3/9] aacraid: Added EEH support
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 1/9] aacraid: SCSI blk tag support Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 2/9] aacraid: Fix RRQ overload Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
2016-01-09 23:23 ` kbuild test robot
2016-01-07 7:22 ` [PATCH V2 4/9] aacraid: Fix memory leak in aac_fib_map_free Raghava Aditya Renukunta
` (5 subsequent siblings)
8 siblings, 1 reply; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Added support for PCI EEH(extended error handling).
Changes in V2:
Made local functions static
Removed call to aac_fib_free_tag
Set adapter_shutdown flag when PCI error detected
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
drivers/scsi/aacraid/aacraid.h | 1 +
drivers/scsi/aacraid/linit.c | 140 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 141 insertions(+)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index fff1306..2916288 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1235,6 +1235,7 @@ struct aac_dev
struct msix_entry msixentry[AAC_MAX_MSIX];
struct aac_msix_ctx aac_msix[AAC_MAX_MSIX]; /* context */
u8 adapter_shutdown;
+ u32 handle_pci_error;
};
#define aac_adapter_interrupt(dev) \
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 129a515..08c6835 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -38,6 +38,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/aer.h>
#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/mutex.h>
@@ -1298,6 +1299,9 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
goto out_deinit;
scsi_scan_host(shost);
+ pci_enable_pcie_error_reporting(pdev);
+ pci_save_state(pdev);
+
return 0;
out_deinit:
@@ -1501,6 +1505,141 @@ static void aac_remove_one(struct pci_dev *pdev)
}
}
+static void aac_flush_ios(struct aac_dev *aac)
+{
+ int i;
+ struct scsi_cmnd *cmd;
+
+ for (i = 0; i < aac->scsi_host_ptr->can_queue; i++) {
+ cmd = (struct scsi_cmnd *)aac->fibs[i].callback_data;
+ if (cmd && (cmd->SCp.phase == AAC_OWNER_FIRMWARE)) {
+ scsi_dma_unmap(cmd);
+
+ if (aac->handle_pci_error)
+ cmd->result = DID_NO_CONNECT << 16;
+ else
+ cmd->result = DID_RESET << 16;
+
+ cmd->scsi_done(cmd);
+ }
+ }
+}
+
+static pci_ers_result_t aac_pci_error_detected(struct pci_dev *pdev,
+ enum pci_channel_state error)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct aac_dev *aac = shost_priv(shost);
+
+ dev_err(&pdev->dev, "aacraid: PCI error detected %x\n", error);
+
+ switch (error) {
+ case pci_channel_io_normal:
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+
+ aac->handle_pci_error = 1;
+ aac->adapter_shutdown = 1;
+
+ scsi_block_requests(aac->scsi_host_ptr);
+ aac_flush_ios(aac);
+ aac_release_resources(aac);
+
+ pci_disable_pcie_error_reporting(pdev);
+ aac_adapter_ioremap(aac, 0);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ aac->handle_pci_error = 1;
+ aac->adapter_shutdown = 1;
+
+ aac_flush_ios(aac);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t aac_pci_mmio_enabled(struct pci_dev *pdev)
+{
+ dev_err(&pdev->dev, "aacraid: PCI error - mmio enabled\n");
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t aac_pci_slot_reset(struct pci_dev *pdev)
+{
+ dev_err(&pdev->dev, "aacraid: PCI error - slot reset\n");
+ pci_restore_state(pdev);
+ if (pci_enable_device(pdev)) {
+ dev_warn(&pdev->dev,
+ "aacraid: failed to enable slave\n");
+ goto fail_device;
+ }
+
+ pci_set_master(pdev);
+
+ if (pci_enable_device_mem(pdev)) {
+ dev_err(&pdev->dev, "pci_enable_device_mem failed\n");
+ goto fail_device;
+ }
+
+ return PCI_ERS_RESULT_RECOVERED;
+
+fail_device:
+ dev_err(&pdev->dev, "aacraid: PCI error - slot reset failed\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+}
+
+
+static void aac_pci_resume(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct scsi_device *sdev = NULL;
+ struct aac_dev *aac = (struct aac_dev *)shost_priv(shost);
+
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+
+ if (aac_adapter_ioremap(aac, aac->base_size)) {
+
+ dev_err(&pdev->dev, "aacraid: ioremap failed\n");
+ /* remap failed, go back ... */
+ aac->comm_interface = AAC_COMM_PRODUCER;
+ if (aac_adapter_ioremap(aac, AAC_MIN_FOOTPRINT_SIZE)) {
+ dev_warn(&pdev->dev,
+ "aacraid: unable to map adapter.\n");
+
+ return;
+ }
+ }
+
+ msleep(10000);
+
+ aac_acquire_resources(aac);
+
+ /*
+ * reset this flag to unblock ioctl() as it was set
+ * at aac_send_shutdown() to block ioctls from upperlayer
+ */
+ aac->adapter_shutdown = 0;
+ aac->handle_pci_error = 0;
+
+ shost_for_each_device(sdev, shost)
+ if (sdev->sdev_state == SDEV_OFFLINE)
+ sdev->sdev_state = SDEV_RUNNING;
+ scsi_unblock_requests(aac->scsi_host_ptr);
+ scsi_scan_host(aac->scsi_host_ptr);
+ pci_save_state(pdev);
+
+ dev_err(&pdev->dev, "aacraid: PCI error - resume\n");
+}
+
+static struct pci_error_handlers aac_pci_err_handler = {
+ .error_detected = aac_pci_error_detected,
+ .mmio_enabled = aac_pci_mmio_enabled,
+ .slot_reset = aac_pci_slot_reset,
+ .resume = aac_pci_resume,
+};
+
static struct pci_driver aac_pci_driver = {
.name = AAC_DRIVERNAME,
.id_table = aac_pci_tbl,
@@ -1511,6 +1650,7 @@ static struct pci_driver aac_pci_driver = {
.resume = aac_resume,
#endif
.shutdown = aac_shutdown,
+ .err_handler = &aac_pci_err_handler,
};
static int __init aac_init(void)
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH V2 3/9] aacraid: Added EEH support
2016-01-07 7:22 ` [PATCH V2 3/9] aacraid: Added EEH support Raghava Aditya Renukunta
@ 2016-01-09 23:23 ` kbuild test robot
0 siblings, 0 replies; 16+ messages in thread
From: kbuild test robot @ 2016-01-09 23:23 UTC (permalink / raw)
Cc: kbuild-all, JBottomley, linux-scsi, Mahesh.Rajashekhara,
Murthy.Bhat, Gana.Sridaran, aacraid, Scott.Benesh, jthumshirn,
thenzl, David.Carroll, RaghavaAditya.Renukunta
[-- Attachment #1: Type: text/plain, Size: 3982 bytes --]
Hi Raghava,
[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc8 next-20160108]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Raghava-Aditya-Renukunta/aacraid-Patchset-for-aacraid-driver-version-41052/20160107-071520
base: https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: microblaze-allyesconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=microblaze
All errors (new ones prefixed by >>):
drivers/scsi/aacraid/linit.c: In function 'aac_pci_error_detected':
>> drivers/scsi/aacraid/linit.c:1546:3: error: implicit declaration of function 'aac_release_resources' [-Werror=implicit-function-declaration]
aac_release_resources(aac);
^
drivers/scsi/aacraid/linit.c: In function 'aac_pci_resume':
>> drivers/scsi/aacraid/linit.c:1617:2: error: implicit declaration of function 'aac_acquire_resources' [-Werror=implicit-function-declaration]
aac_acquire_resources(aac);
^
cc1: some warnings being treated as errors
vim +/aac_release_resources +1546 drivers/scsi/aacraid/linit.c
1540
1541 aac->handle_pci_error = 1;
1542 aac->adapter_shutdown = 1;
1543
1544 scsi_block_requests(aac->scsi_host_ptr);
1545 aac_flush_ios(aac);
> 1546 aac_release_resources(aac);
1547
1548 pci_disable_pcie_error_reporting(pdev);
1549 aac_adapter_ioremap(aac, 0);
1550
1551 return PCI_ERS_RESULT_NEED_RESET;
1552 case pci_channel_io_perm_failure:
1553 aac->handle_pci_error = 1;
1554 aac->adapter_shutdown = 1;
1555
1556 aac_flush_ios(aac);
1557 return PCI_ERS_RESULT_DISCONNECT;
1558 }
1559
1560 return PCI_ERS_RESULT_NEED_RESET;
1561 }
1562
1563 static pci_ers_result_t aac_pci_mmio_enabled(struct pci_dev *pdev)
1564 {
1565 dev_err(&pdev->dev, "aacraid: PCI error - mmio enabled\n");
1566 return PCI_ERS_RESULT_NEED_RESET;
1567 }
1568
1569 static pci_ers_result_t aac_pci_slot_reset(struct pci_dev *pdev)
1570 {
1571 dev_err(&pdev->dev, "aacraid: PCI error - slot reset\n");
1572 pci_restore_state(pdev);
1573 if (pci_enable_device(pdev)) {
1574 dev_warn(&pdev->dev,
1575 "aacraid: failed to enable slave\n");
1576 goto fail_device;
1577 }
1578
1579 pci_set_master(pdev);
1580
1581 if (pci_enable_device_mem(pdev)) {
1582 dev_err(&pdev->dev, "pci_enable_device_mem failed\n");
1583 goto fail_device;
1584 }
1585
1586 return PCI_ERS_RESULT_RECOVERED;
1587
1588 fail_device:
1589 dev_err(&pdev->dev, "aacraid: PCI error - slot reset failed\n");
1590 return PCI_ERS_RESULT_DISCONNECT;
1591 }
1592
1593
1594 static void aac_pci_resume(struct pci_dev *pdev)
1595 {
1596 struct Scsi_Host *shost = pci_get_drvdata(pdev);
1597 struct scsi_device *sdev = NULL;
1598 struct aac_dev *aac = (struct aac_dev *)shost_priv(shost);
1599
1600 pci_cleanup_aer_uncorrect_error_status(pdev);
1601
1602 if (aac_adapter_ioremap(aac, aac->base_size)) {
1603
1604 dev_err(&pdev->dev, "aacraid: ioremap failed\n");
1605 /* remap failed, go back ... */
1606 aac->comm_interface = AAC_COMM_PRODUCER;
1607 if (aac_adapter_ioremap(aac, AAC_MIN_FOOTPRINT_SIZE)) {
1608 dev_warn(&pdev->dev,
1609 "aacraid: unable to map adapter.\n");
1610
1611 return;
1612 }
1613 }
1614
1615 msleep(10000);
1616
> 1617 aac_acquire_resources(aac);
1618
1619 /*
1620 * reset this flag to unblock ioctl() as it was set
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 43181 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH V2 4/9] aacraid: Fix memory leak in aac_fib_map_free
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
` (2 preceding siblings ...)
2016-01-07 7:22 ` [PATCH V2 3/9] aacraid: Added EEH support Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 5/9] aacraid: Set correct msix count for EEH recovery Raghava Aditya Renukunta
` (4 subsequent siblings)
8 siblings, 0 replies; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
aac_fib_map_free() calls pci_free_consistent() without checking that
dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they
are indeed NULL/0, this will result in a hang as pci_free_consistent()
will attempt to invalidate cache for the entire 64-bit address space
(which would take a very long time).
Fixed by adding a check to make sure that dev->hw_fib_va and
dev->max_fib_size are not NULL and 0 respectively.
Changes in V2:
None
Fixes: 9ad5204d6 - "[SCSI]aacraid: incorrect dma mapping mask
during blinked recover or user initiated reset"
Cc: stable@vger.kernel.org
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
drivers/scsi/aacraid/commsup.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index e9f6e70..55459b4 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -83,9 +83,12 @@ static int fib_map_alloc(struct aac_dev *dev)
void aac_fib_map_free(struct aac_dev *dev)
{
- pci_free_consistent(dev->pdev,
- dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
- dev->hw_fib_va, dev->hw_fib_pa);
+ if (dev->hw_fib_va && dev->max_fib_size) {
+ pci_free_consistent(dev->pdev,
+ (dev->max_fib_size *
+ (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB)),
+ dev->hw_fib_va, dev->hw_fib_pa);
+ }
dev->hw_fib_va = NULL;
dev->hw_fib_pa = 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH V2 5/9] aacraid: Set correct msix count for EEH recovery
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
` (3 preceding siblings ...)
2016-01-07 7:22 ` [PATCH V2 4/9] aacraid: Fix memory leak in aac_fib_map_free Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
2016-01-08 5:00 ` Seymour, Shane M
2016-01-07 7:22 ` [PATCH V2 6/9] aacraid: Fundamental reset support for Series 7 Raghava Aditya Renukunta
` (3 subsequent siblings)
8 siblings, 1 reply; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
During EEH recovery number of online CPU's might change thereby changing
the number of MSIx vectors. Since each fib is allocated to a vector,
changes in the number of vectors causes fib to be sent thru invalid
vectors.In addition the correct number of MSIx vectors is not
updated in the INIT struct sent to the controller, when it is
reinitialized.
Fixed by reassigning vectors to fibs based on the updated number of MSIx
vectors and updating the INIT structure before sending to controller.
Changes in V2:
Replaced fib vector allocation code with aac_fib_vector_assign
Fixes: MSI-X vector calculation for suspend/resume
Cc: stable@vger.kernel.org
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
---
drivers/scsi/aacraid/linit.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 08c6835..6d79181 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1410,8 +1410,18 @@ static int aac_acquire_resources(struct aac_dev *dev)
aac_adapter_enable_int(dev);
- if (!dev->sync_mode)
+ /*max msix may change after EEH
+ * Re-assign vectors to fibs
+ */
+ aac_fib_vector_assign(dev);
+
+ if (!dev->sync_mode) {
+ /* After EEH recovery or suspend resume, max_msix count
+ * may change, therfore updating in init as well.
+ */
aac_adapter_start(dev);
+ dev->init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix);
+ }
return 0;
error_iounmap:
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* RE: [PATCH V2 5/9] aacraid: Set correct msix count for EEH recovery
2016-01-07 7:22 ` [PATCH V2 5/9] aacraid: Set correct msix count for EEH recovery Raghava Aditya Renukunta
@ 2016-01-08 5:00 ` Seymour, Shane M
0 siblings, 0 replies; 16+ messages in thread
From: Seymour, Shane M @ 2016-01-08 5:00 UTC (permalink / raw)
To: Raghava Aditya Renukunta, JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH V2 6/9] aacraid: Fundamental reset support for Series 7
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
` (4 preceding siblings ...)
2016-01-07 7:22 ` [PATCH V2 5/9] aacraid: Set correct msix count for EEH recovery Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 7/9] aacraid: Fix AIF triggered IOP_RESET Raghava Aditya Renukunta
` (2 subsequent siblings)
8 siblings, 0 replies; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Series 7 does not support PCI hot reset used by EEH.
Enabled fundamental reset only for Series 7
Changes in V2:
None
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
drivers/scsi/aacraid/linit.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 6d79181..6944560 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1135,6 +1135,12 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
u64 dmamask;
extern int aac_sync_mode;
+ /*
+ * Only series 7 needs freset.
+ */
+ if (pdev->device == PMC_DEVICE_S7)
+ pdev->needs_freset = 1;
+
list_for_each_entry(aac, &aac_devices, entry) {
if (aac->id > unique_id)
break;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH V2 7/9] aacraid: Fix AIF triggered IOP_RESET
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
` (5 preceding siblings ...)
2016-01-07 7:22 ` [PATCH V2 6/9] aacraid: Fundamental reset support for Series 7 Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
2016-01-08 5:57 ` Seymour, Shane M
2016-01-07 7:22 ` [PATCH V2 8/9] aacraid: Fix character device re-initialization Raghava Aditya Renukunta
2016-01-07 7:22 ` [PATCH V2 9/9] aacraid: Update driver version Raghava Aditya Renukunta
8 siblings, 1 reply; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
while driver removal is in progress or PCI shutdown is invoked, driver
kills AIF aacraid thread, but IOCTL requests from the management tools
re-start AIF thread leading to IOP_RESET.
Fixed by setting adapter_shutdown flag when PCI shutdown is invoked.
Changes in V2:
Set adapter_shutdown flag before shutdown command is sent to \
controller
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
---
drivers/scsi/aacraid/comminit.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 0e954e3..fe08854 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -212,8 +212,9 @@ int aac_send_shutdown(struct aac_dev * dev)
return -ENOMEM;
aac_fib_init(fibctx);
- cmd = (struct aac_close *) fib_data(fibctx);
+ dev->adapter_shutdown = 1;
+ cmd = (struct aac_close *) fib_data(fibctx);
cmd->command = cpu_to_le32(VM_CloseAll);
cmd->cid = cpu_to_le32(0xfffffffe);
@@ -229,7 +230,6 @@ int aac_send_shutdown(struct aac_dev * dev)
/* FIB should be freed only after getting the response from the F/W */
if (status != -ERESTARTSYS)
aac_fib_free(fibctx);
- dev->adapter_shutdown = 1;
if ((dev->pdev->device == PMC_DEVICE_S7 ||
dev->pdev->device == PMC_DEVICE_S8 ||
dev->pdev->device == PMC_DEVICE_S9) &&
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* RE: [PATCH V2 7/9] aacraid: Fix AIF triggered IOP_RESET
2016-01-07 7:22 ` [PATCH V2 7/9] aacraid: Fix AIF triggered IOP_RESET Raghava Aditya Renukunta
@ 2016-01-08 5:57 ` Seymour, Shane M
2016-01-08 23:37 ` Raghava Aditya Renukunta
0 siblings, 1 reply; 16+ messages in thread
From: Seymour, Shane M @ 2016-01-08 5:57 UTC (permalink / raw)
To: Raghava Aditya Renukunta, JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll
Is there still a race in the code so the same issue can happen even with this patch?
When __aac_shutdown is called it clears out the events and stops the kernel thread and
then it calls aac_send_shutdown which sets adapter_shutdown. The ioctl path checks
adapter_shutdown then allows the ioctl to proceed so is there still a window where someone
can get past the checks and restart the kernel thread? To me it looks likely it's a very small
window but it still appears to be there because you don't prevent ioctl calls from continuing
until after you've stopped the kernel thread. It seems as though adapter_shutdown needs to
get set at the very start of __aac_shutdown as well to prevent any more requests from
being queued when __aac_shutdown gets called.
Also since one CPU may be setting the value of adapter_shutdown when another one is
reading it and you don't use any kind of lock to control access to the value are you going to
have SMP coherency issues with the value of adapter_shutdown? That is you read it as 0
because the CPU that changed it to 1 has it in a register and hasn't stored it yet. For example
in the ioctl checking case:
static long aac_cfg_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
int ret;
struct aac_dev *aac;
aac = (struct aac_dev *)file->private_data;
if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
return -EPERM;
mutex_lock(&aac_mutex);
ret = aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
mutex_unlock(&aac_mutex);
return ret;
}
It could be loaded speculatively and you don't know for sure that it's value is correct at
the time you do the test.
Thanks
Shane
^ permalink raw reply [flat|nested] 16+ messages in thread* RE: [PATCH V2 7/9] aacraid: Fix AIF triggered IOP_RESET
2016-01-08 5:57 ` Seymour, Shane M
@ 2016-01-08 23:37 ` Raghava Aditya Renukunta
0 siblings, 0 replies; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-08 23:37 UTC (permalink / raw)
To: Seymour, Shane M, JBottomley, linux-scsi
Cc: Mahesh Rajashekhara, Murthy Bhat, Gana Sridaran, aacraid,
Scott Benesh, jthumshirn, thenzl, David Carroll
Hello Shane,
> -----Original Message-----
> From: Seymour, Shane M [mailto:shane.seymour@hpe.com]
> Sent: Thursday, January 7, 2016 9:58 PM
> To: Raghava Aditya Renukunta; JBottomley@odin.com; linux-
> scsi@vger.kernel.org
> Cc: Mahesh Rajashekhara; Murthy Bhat; Gana Sridaran; aacraid@pmc-
> sierra.com; Scott Benesh; jthumshirn@suse.de; thenzl@redhat.com; David
> Carroll
> Subject: RE: [PATCH V2 7/9] aacraid: Fix AIF triggered IOP_RESET
>
> Is there still a race in the code so the same issue can happen even with this
> patch?
>
> When __aac_shutdown is called it clears out the events and stops the kernel
> thread and
> then it calls aac_send_shutdown which sets adapter_shutdown. The ioctl
> path checks
> adapter_shutdown then allows the ioctl to proceed so is there still a window
> where someone
> can get past the checks and restart the kernel thread? To me it looks likely it's
> a very small
> window but it still appears to be there because you don't prevent ioctl calls
> from continuing
> until after you've stopped the kernel thread. It seems as though
> adapter_shutdown needs to
> get set at the very start of __aac_shutdown as well to prevent any more
> requests from
> being queued when __aac_shutdown gets called.
I agree aac_send_shutdown needs to be called first thing in
__aac_shutdown, to prevent ioctls from coming through.
> Also since one CPU may be setting the value of adapter_shutdown when
> another one is
> reading it and you don't use any kind of lock to control access to the value are
> you going to
> have SMP coherency issues with the value of adapter_shutdown? That is you
> read it as 0
> because the CPU that changed it to 1 has it in a register and hasn't stored it
> yet. For example
> in the ioctl checking case:
>
> static long aac_cfg_ioctl(struct file *file,
> unsigned int cmd, unsigned long arg)
> {
> int ret;
> struct aac_dev *aac;
> aac = (struct aac_dev *)file->private_data;
> if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
> return -EPERM;
> mutex_lock(&aac_mutex);
> ret = aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
> mutex_unlock(&aac_mutex);
>
> return ret;
> }
>
> It could be loaded speculatively and you don't know for sure that it's value is
> correct at
> the time you do the test.
Yes, that is true, I think making aac->adapter_shutdown as atomic variable will
Prevent SMP coherency issues.
I will make the necessary changes and resubmit this series.
Thank you very much for your Feedback Shane.
Regards,
Raghava Aditya
> Thanks
> Shane
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH V2 8/9] aacraid: Fix character device re-initialization
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
` (6 preceding siblings ...)
2016-01-07 7:22 ` [PATCH V2 7/9] aacraid: Fix AIF triggered IOP_RESET Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
2016-01-08 6:42 ` Seymour, Shane M
2016-01-07 7:22 ` [PATCH V2 9/9] aacraid: Update driver version Raghava Aditya Renukunta
8 siblings, 1 reply; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
During EEH PCI hotplug activity kernel unloads and loads the driver,
causing character device to be unregistered(aac_remove_one).When the
driver is loaded back using aac_probe_one the character device needs
to be registered again for the AIF management tools to work.
Fixed by adding code to register character device in aac_probe_one if
it is unregistered in aac_remove_one.
Changes in V2:
Added macros to track character device state
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
---
drivers/scsi/aacraid/aacraid.h | 7 +++++++
drivers/scsi/aacraid/linit.c | 21 ++++++++++++++-------
2 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 2916288..a440840 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -94,6 +94,13 @@ enum {
#define aac_phys_to_logical(x) ((x)+1)
#define aac_logical_to_phys(x) ((x)?(x)-1:0)
+/*
+ * These macros are for keeping track of
+ * character device state.
+ */
+#define AAC_CHARDEV_UNREGISTERED (-1)
+#define AAC_CHARDEV_NEEDS_REINIT (-2)
+
/* #define AAC_DETAILED_STATUS_INFO */
struct diskparm
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 6944560..fea1ba1 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -80,7 +80,7 @@ MODULE_VERSION(AAC_DRIVER_FULL_VERSION);
static DEFINE_MUTEX(aac_mutex);
static LIST_HEAD(aac_devices);
-static int aac_cfg_major = -1;
+static int aac_cfg_major = AAC_CHARDEV_UNREGISTERED;
char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
/*
@@ -1123,6 +1123,13 @@ static void __aac_shutdown(struct aac_dev * aac)
else if (aac->max_msix > 1)
pci_disable_msix(aac->pdev);
}
+static void aac_init_char(void)
+{
+ aac_cfg_major = register_chrdev(0, "aac", &aac_cfg_fops);
+ if (aac_cfg_major < 0) {
+ pr_err("aacraid: unable to register \"aac\" device.\n");
+ }
+}
static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -1180,6 +1187,9 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
shost->max_cmd_len = 16;
shost->use_cmd_list = 1;
+ if (aac_cfg_major == AAC_CHARDEV_NEEDS_REINIT)
+ aac_init_char();
+
aac = (struct aac_dev *)shost->hostdata;
aac->base_start = pci_resource_start(pdev, 0);
aac->scsi_host_ptr = shost;
@@ -1517,7 +1527,7 @@ static void aac_remove_one(struct pci_dev *pdev)
pci_disable_device(pdev);
if (list_empty(&aac_devices)) {
unregister_chrdev(aac_cfg_major, "aac");
- aac_cfg_major = -1;
+ aac_cfg_major = AAC_CHARDEV_NEEDS_REINIT;
}
}
@@ -1680,11 +1690,8 @@ static int __init aac_init(void)
if (error < 0)
return error;
- aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops);
- if (aac_cfg_major < 0) {
- printk(KERN_WARNING
- "aacraid: unable to register \"aac\" device.\n");
- }
+ aac_init_char();
+
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* RE: [PATCH V2 8/9] aacraid: Fix character device re-initialization
2016-01-07 7:22 ` [PATCH V2 8/9] aacraid: Fix character device re-initialization Raghava Aditya Renukunta
@ 2016-01-08 6:42 ` Seymour, Shane M
0 siblings, 0 replies; 16+ messages in thread
From: Seymour, Shane M @ 2016-01-08 6:42 UTC (permalink / raw)
To: Raghava Aditya Renukunta, JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH V2 9/9] aacraid: Update driver version
2016-01-07 7:22 [PATCH V2 0/9] aacraid: Patchset for aacraid driver version 41052 Raghava Aditya Renukunta
` (7 preceding siblings ...)
2016-01-07 7:22 ` [PATCH V2 8/9] aacraid: Fix character device re-initialization Raghava Aditya Renukunta
@ 2016-01-07 7:22 ` Raghava Aditya Renukunta
8 siblings, 0 replies; 16+ messages in thread
From: Raghava Aditya Renukunta @ 2016-01-07 7:22 UTC (permalink / raw)
To: JBottomley, linux-scsi
Cc: Mahesh.Rajashekhara, Murthy.Bhat, Gana.Sridaran, aacraid,
Scott.Benesh, jthumshirn, thenzl, David.Carroll,
RaghavaAditya.Renukunta
From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Updated diver version to 41052
Changes in V2:
None
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
drivers/scsi/aacraid/aacraid.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index a440840..22130b3 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -62,7 +62,7 @@ enum {
#define PMC_GLOBAL_INT_BIT0 0x00000001
#ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 41010
+# define AAC_DRIVER_BUILD 41052
# define AAC_DRIVER_BRANCH "-ms"
#endif
#define MAXIMUM_NUM_CONTAINERS 32
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread