* [PATCH v3 1/4] fpga: dfl: change data type of feature id to u16
2020-08-04 7:05 [PATCH v3 0/4] Modularization of DFL private feature drivers Xu Yilun
@ 2020-08-04 7:05 ` Xu Yilun
2020-08-05 9:13 ` Wu, Hao
2020-08-04 7:05 ` [PATCH v3 2/4] fpga: dfl: map feature mmio resources in their own feature drivers Xu Yilun
` (2 subsequent siblings)
3 siblings, 1 reply; 18+ messages in thread
From: Xu Yilun @ 2020-08-04 7:05 UTC (permalink / raw)
To: mdf, linux-fpga, linux-kernel; +Cc: trix, lgoncalv, yilun.xu
The feature id is stored in a 12 bit field in DFH. So a u16 variable is
enough for feature id.
This patch changes all feature id related places to fit u16.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
---
v3: no change.
---
drivers/fpga/dfl-fme-perf.c | 2 +-
drivers/fpga/dfl.c | 29 +++++++++++++++--------------
drivers/fpga/dfl.h | 10 +++++-----
3 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/fpga/dfl-fme-perf.c b/drivers/fpga/dfl-fme-perf.c
index 6ce1ed2..5312662 100644
--- a/drivers/fpga/dfl-fme-perf.c
+++ b/drivers/fpga/dfl-fme-perf.c
@@ -148,7 +148,7 @@ struct fme_perf_priv {
struct device *dev;
void __iomem *ioaddr;
struct pmu pmu;
- u64 id;
+ u16 id;
u32 fab_users;
u32 fab_port_id;
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index 649958a..18575d9 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -58,7 +58,7 @@ static const char *dfl_pdata_key_strings[DFL_ID_MAX] = {
*/
struct dfl_dev_info {
const char *name;
- u32 dfh_id;
+ u16 dfh_id;
struct idr id;
enum dfl_fpga_devt_type devt_type;
};
@@ -134,7 +134,7 @@ static enum dfl_id_type feature_dev_id_type(struct platform_device *pdev)
return DFL_ID_MAX;
}
-static enum dfl_id_type dfh_id_to_type(u32 id)
+static enum dfl_id_type dfh_id_to_type(u16 id)
{
int i;
@@ -454,7 +454,7 @@ struct build_feature_devs_info {
* @nr_irqs: number of irqs of this sub feature.
*/
struct dfl_feature_info {
- u64 fid;
+ u16 fid;
struct resource mmio_res;
void __iomem *ioaddr;
struct list_head node;
@@ -649,7 +649,7 @@ static inline u32 feature_size(void __iomem *start)
return ofst ? ofst : 4096;
}
-static u64 feature_id(void __iomem *start)
+static u16 feature_id(void __iomem *start)
{
u64 v = readq(start + DFH);
u16 id = FIELD_GET(DFH_ID, v);
@@ -667,7 +667,7 @@ static u64 feature_id(void __iomem *start)
}
static int parse_feature_irqs(struct build_feature_devs_info *binfo,
- resource_size_t ofst, u64 fid,
+ resource_size_t ofst, u16 fid,
unsigned int *irq_base, unsigned int *nr_irqs)
{
void __iomem *base = binfo->ioaddr + ofst;
@@ -713,12 +713,12 @@ static int parse_feature_irqs(struct build_feature_devs_info *binfo,
return 0;
}
- dev_dbg(binfo->dev, "feature: 0x%llx, irq_base: %u, nr_irqs: %u\n",
+ dev_dbg(binfo->dev, "feature: 0x%x, irq_base: %u, nr_irqs: %u\n",
fid, ibase, inr);
if (ibase + inr > binfo->nr_irqs) {
dev_err(binfo->dev,
- "Invalid interrupt number in feature 0x%llx\n", fid);
+ "Invalid interrupt number in feature 0x%x\n", fid);
return -EINVAL;
}
@@ -726,7 +726,7 @@ static int parse_feature_irqs(struct build_feature_devs_info *binfo,
virq = binfo->irq_table[ibase + i];
if (virq < 0 || virq > NR_IRQS) {
dev_err(binfo->dev,
- "Invalid irq table entry for feature 0x%llx\n",
+ "Invalid irq table entry for feature 0x%x\n",
fid);
return -EINVAL;
}
@@ -748,7 +748,7 @@ static int parse_feature_irqs(struct build_feature_devs_info *binfo,
static int
create_feature_instance(struct build_feature_devs_info *binfo,
struct dfl_fpga_enum_dfl *dfl, resource_size_t ofst,
- resource_size_t size, u64 fid)
+ resource_size_t size, u16 fid)
{
unsigned int irq_base, nr_irqs;
struct dfl_feature_info *finfo;
@@ -819,9 +819,10 @@ static int parse_feature_fiu(struct build_feature_devs_info *binfo,
struct dfl_fpga_enum_dfl *dfl,
resource_size_t ofst)
{
- u32 id, offset;
- u64 v;
int ret = 0;
+ u32 offset;
+ u16 id;
+ u64 v;
v = readq(dfl->ioaddr + ofst + DFH);
id = FIELD_GET(DFH_ID, v);
@@ -855,8 +856,8 @@ static int parse_feature_private(struct build_feature_devs_info *binfo,
resource_size_t ofst)
{
if (!binfo->feature_dev) {
- dev_err(binfo->dev, "the private feature %llx does not belong to any AFU.\n",
- (unsigned long long)feature_id(dfl->ioaddr + ofst));
+ dev_err(binfo->dev, "the private feature 0x%x does not belong to any AFU.\n",
+ feature_id(dfl->ioaddr + ofst));
return -EINVAL;
}
@@ -1424,7 +1425,7 @@ static int do_set_irq_trigger(struct dfl_feature *feature, unsigned int idx,
return 0;
feature->irq_ctx[idx].name =
- kasprintf(GFP_KERNEL, "fpga-irq[%u](%s-%llx)", idx,
+ kasprintf(GFP_KERNEL, "fpga-irq[%u](%s-%x)", idx,
dev_name(&pdev->dev), feature->id);
if (!feature->irq_ctx[idx].name)
return -ENOMEM;
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index a32dfba..bc61942 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -197,7 +197,7 @@ int dfl_fpga_check_port_id(struct platform_device *pdev, void *pport_id);
* @id: unique dfl private feature id.
*/
struct dfl_feature_id {
- u64 id;
+ u16 id;
};
/**
@@ -240,7 +240,7 @@ struct dfl_feature_irq_ctx {
*/
struct dfl_feature {
struct platform_device *dev;
- u64 id;
+ u16 id;
int resource_index;
void __iomem *ioaddr;
struct dfl_feature_irq_ctx *irq_ctx;
@@ -365,7 +365,7 @@ struct platform_device *dfl_fpga_inode_to_feature_dev(struct inode *inode)
(feature) < (pdata)->features + (pdata)->num; (feature)++)
static inline
-struct dfl_feature *dfl_get_feature_by_id(struct device *dev, u64 id)
+struct dfl_feature *dfl_get_feature_by_id(struct device *dev, u16 id)
{
struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
struct dfl_feature *feature;
@@ -378,7 +378,7 @@ struct dfl_feature *dfl_get_feature_by_id(struct device *dev, u64 id)
}
static inline
-void __iomem *dfl_get_feature_ioaddr_by_id(struct device *dev, u64 id)
+void __iomem *dfl_get_feature_ioaddr_by_id(struct device *dev, u16 id)
{
struct dfl_feature *feature = dfl_get_feature_by_id(dev, id);
@@ -389,7 +389,7 @@ void __iomem *dfl_get_feature_ioaddr_by_id(struct device *dev, u64 id)
return NULL;
}
-static inline bool is_dfl_feature_present(struct device *dev, u64 id)
+static inline bool is_dfl_feature_present(struct device *dev, u16 id)
{
return !!dfl_get_feature_ioaddr_by_id(dev, id);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* RE: [PATCH v3 1/4] fpga: dfl: change data type of feature id to u16
2020-08-04 7:05 ` [PATCH v3 1/4] fpga: dfl: change data type of feature id to u16 Xu Yilun
@ 2020-08-05 9:13 ` Wu, Hao
0 siblings, 0 replies; 18+ messages in thread
From: Wu, Hao @ 2020-08-05 9:13 UTC (permalink / raw)
To: Xu, Yilun, mdf, linux-fpga, linux-kernel; +Cc: trix, lgoncalv, Xu, Yilun
> Subject: [PATCH v3 1/4] fpga: dfl: change data type of feature id to u16
>
> The feature id is stored in a 12 bit field in DFH. So a u16 variable is
> enough for feature id.
>
> This patch changes all feature id related places to fit u16.
>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Thanks
Hao
^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: [PATCH v3 1/4] fpga: dfl: change data type of feature id to u16
@ 2020-08-05 9:13 ` Wu, Hao
0 siblings, 0 replies; 18+ messages in thread
From: Wu, Hao @ 2020-08-05 9:13 UTC (permalink / raw)
To: Xu, Yilun, mdf, linux-fpga, linux-kernel; +Cc: trix, lgoncalv
> Subject: [PATCH v3 1/4] fpga: dfl: change data type of feature id to u16
>
> The feature id is stored in a 12 bit field in DFH. So a u16 variable is
> enough for feature id.
>
> This patch changes all feature id related places to fit u16.
>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Thanks
Hao
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 2/4] fpga: dfl: map feature mmio resources in their own feature drivers
2020-08-04 7:05 [PATCH v3 0/4] Modularization of DFL private feature drivers Xu Yilun
2020-08-04 7:05 ` [PATCH v3 1/4] fpga: dfl: change data type of feature id to u16 Xu Yilun
@ 2020-08-04 7:05 ` Xu Yilun
2020-08-05 12:15 ` Wu, Hao
2020-08-04 7:05 ` [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices Xu Yilun
2020-08-04 7:05 ` [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature Xu Yilun
3 siblings, 1 reply; 18+ messages in thread
From: Xu Yilun @ 2020-08-04 7:05 UTC (permalink / raw)
To: mdf, linux-fpga, linux-kernel
Cc: trix, lgoncalv, yilun.xu, Wu Hao, Matthew Gerlach, Russ Weight
This patch makes preparation for modularization of DFL sub feature
drivers.
Currently, if we need to support a new DFL sub feature, an entry should
be added to fme/port_feature_drvs[] in dfl-fme/port-main.c. And we need
to re-compile the whole DFL modules. That make the DFL drivers hard to be
extended.
Another consideration is that DFL may contain some IP blocks which are
already supported by kernel, most of them are supported by platform
device drivers. We could create platform devices for these IP blocks and
get them supported by these drivers.
An important issue is that platform device drivers usually requests mmio
resources on probe. But now dfl mmio is mapped in dfl bus driver (e.g.
dfl-pci) as a whole region. Then platform device drivers for sub features
can't request their own mmio resources again. This is what the patch
trying to resolve.
This patch changes the DFL enumeration. DFL bus driver will unmap mmio
resources after first step enumeration and pass enumeration info to DFL
framework. Then DFL framework will map the mmio resources again, do 2nd
step enumeration, and also unmap the mmio resources. In this way, sub
feature drivers could then request their own mmio resources as needed.
An exception is that mmio resource of FIU headers are still mapped in dfl
bus driver. The FIU headers have some fundamental functions (sriov set,
port enable/disable) needed for dfl bus devices and other sub features.
They should not be unmapped as long as dfl bus device is alive.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
---
v2: delete dfl_binfo_shift() cause no shift is possible for FIU parsing.
Only map bar0 for first phase enumeration in dfl-pci, we can find
all dfl mmio resource info in bar0.
Some minor fixes for comments from Hao & Tom.
v3: no change.
---
drivers/fpga/dfl-pci.c | 24 +++----
drivers/fpga/dfl.c | 185 ++++++++++++++++++++++++++++++++++---------------
drivers/fpga/dfl.h | 7 +-
3 files changed, 140 insertions(+), 76 deletions(-)
diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
index e220bec..a2203d0 100644
--- a/drivers/fpga/dfl-pci.c
+++ b/drivers/fpga/dfl-pci.c
@@ -31,12 +31,12 @@ struct cci_drvdata {
struct dfl_fpga_cdev *cdev; /* container device */
};
-static void __iomem *cci_pci_ioremap_bar(struct pci_dev *pcidev, int bar)
+static void __iomem *cci_pci_ioremap_bar0(struct pci_dev *pcidev)
{
- if (pcim_iomap_regions(pcidev, BIT(bar), DRV_NAME))
+ if (pcim_iomap_regions(pcidev, BIT(0), DRV_NAME))
return NULL;
- return pcim_iomap_table(pcidev)[bar];
+ return pcim_iomap_table(pcidev)[0];
}
static int cci_pci_alloc_irq(struct pci_dev *pcidev)
@@ -156,8 +156,8 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
goto irq_free_exit;
}
- /* start to find Device Feature List from Bar 0 */
- base = cci_pci_ioremap_bar(pcidev, 0);
+ /* start to find Device Feature List in Bar 0 */
+ base = cci_pci_ioremap_bar0(pcidev);
if (!base) {
ret = -ENOMEM;
goto irq_free_exit;
@@ -172,7 +172,7 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
start = pci_resource_start(pcidev, 0);
len = pci_resource_len(pcidev, 0);
- dfl_fpga_enum_info_add_dfl(info, start, len, base);
+ dfl_fpga_enum_info_add_dfl(info, start, len);
/*
* find more Device Feature Lists (e.g. Ports) per information
@@ -196,26 +196,24 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
*/
bar = FIELD_GET(FME_PORT_OFST_BAR_ID, v);
offset = FIELD_GET(FME_PORT_OFST_DFH_OFST, v);
- base = cci_pci_ioremap_bar(pcidev, bar);
- if (!base)
- continue;
-
start = pci_resource_start(pcidev, bar) + offset;
len = pci_resource_len(pcidev, bar) - offset;
- dfl_fpga_enum_info_add_dfl(info, start, len,
- base + offset);
+ dfl_fpga_enum_info_add_dfl(info, start, len);
}
} else if (dfl_feature_is_port(base)) {
start = pci_resource_start(pcidev, 0);
len = pci_resource_len(pcidev, 0);
- dfl_fpga_enum_info_add_dfl(info, start, len, base);
+ dfl_fpga_enum_info_add_dfl(info, start, len);
} else {
ret = -ENODEV;
goto irq_free_exit;
}
+ /* release I/O mappings for next step enumeration */
+ pcim_iounmap_regions(pcidev, BIT(0));
+
/* start enumeration with prepared enumeration information */
cdev = dfl_fpga_feature_devs_enumerate(info);
if (IS_ERR(cdev)) {
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index 18575d9..c649239 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -250,6 +250,8 @@ int dfl_fpga_check_port_id(struct platform_device *pdev, void *pport_id)
}
EXPORT_SYMBOL_GPL(dfl_fpga_check_port_id);
+#define is_header_feature(feature) ((feature)->id == FEATURE_ID_FIU_HEADER)
+
/**
* dfl_fpga_dev_feature_uinit - uinit for sub features of dfl feature device
* @pdev: feature device.
@@ -273,8 +275,22 @@ static int dfl_feature_instance_init(struct platform_device *pdev,
struct dfl_feature *feature,
struct dfl_feature_driver *drv)
{
+ void __iomem *base;
int ret = 0;
+ if (!is_header_feature(feature)) {
+ base = devm_platform_ioremap_resource(pdev,
+ feature->resource_index);
+ if (IS_ERR(base)) {
+ dev_err(&pdev->dev,
+ "ioremap failed for feature 0x%x!\n",
+ feature->id);
+ return PTR_ERR(base);
+ }
+
+ feature->ioaddr = base;
+ }
+
if (drv->ops->init) {
ret = drv->ops->init(pdev, feature);
if (ret)
@@ -427,7 +443,9 @@ EXPORT_SYMBOL_GPL(dfl_fpga_dev_ops_unregister);
* @irq_table: Linux IRQ numbers for all irqs, indexed by local irq index of
* this device.
* @feature_dev: current feature device.
- * @ioaddr: header register region address of feature device in enumeration.
+ * @ioaddr: header register region address of current FIU in enumeration.
+ * @start: register resource start of current FIU.
+ * @len: max register resource length of current FIU.
* @sub_features: a sub features linked list for feature device in enumeration.
* @feature_num: number of sub features for feature device in enumeration.
*/
@@ -439,6 +457,8 @@ struct build_feature_devs_info {
struct platform_device *feature_dev;
void __iomem *ioaddr;
+ resource_size_t start;
+ resource_size_t len;
struct list_head sub_features;
int feature_num;
};
@@ -484,10 +504,7 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
struct dfl_feature_platform_data *pdata;
struct dfl_feature_info *finfo, *p;
enum dfl_id_type type;
- int ret, index = 0;
-
- if (!fdev)
- return 0;
+ int ret, index = 0, res_idx = 0;
type = feature_dev_id_type(fdev);
if (WARN_ON_ONCE(type >= DFL_ID_MAX))
@@ -530,16 +547,30 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
/* fill features and resource information for feature dev */
list_for_each_entry_safe(finfo, p, &binfo->sub_features, node) {
- struct dfl_feature *feature = &pdata->features[index];
+ struct dfl_feature *feature = &pdata->features[index++];
struct dfl_feature_irq_ctx *ctx;
unsigned int i;
/* save resource information for each feature */
feature->dev = fdev;
feature->id = finfo->fid;
- feature->resource_index = index;
- feature->ioaddr = finfo->ioaddr;
- fdev->resource[index++] = finfo->mmio_res;
+
+ /*
+ * map header resource for dfl bus device. Don't add header
+ * resource to feature devices, or the resource tree will be
+ * disordered and cause warning on resource release
+ */
+ if (is_header_feature(feature)) {
+ feature->resource_index = -1;
+ feature->ioaddr =
+ devm_ioremap_resource(binfo->dev,
+ &finfo->mmio_res);
+ if (IS_ERR(feature->ioaddr))
+ return PTR_ERR(feature->ioaddr);
+ } else {
+ feature->resource_index = res_idx;
+ fdev->resource[res_idx++] = finfo->mmio_res;
+ }
if (finfo->nr_irqs) {
ctx = devm_kcalloc(binfo->dev, finfo->nr_irqs,
@@ -582,19 +613,13 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
static int
build_info_create_dev(struct build_feature_devs_info *binfo,
- enum dfl_id_type type, void __iomem *ioaddr)
+ enum dfl_id_type type)
{
struct platform_device *fdev;
- int ret;
if (type >= DFL_ID_MAX)
return -EINVAL;
- /* we will create a new device, commit current device first */
- ret = build_info_commit_dev(binfo);
- if (ret)
- return ret;
-
/*
* we use -ENODEV as the initialization indicator which indicates
* whether the id need to be reclaimed
@@ -605,7 +630,7 @@ build_info_create_dev(struct build_feature_devs_info *binfo,
binfo->feature_dev = fdev;
binfo->feature_num = 0;
- binfo->ioaddr = ioaddr;
+
INIT_LIST_HEAD(&binfo->sub_features);
fdev->id = dfl_id_alloc(type, &fdev->dev);
@@ -747,18 +772,17 @@ static int parse_feature_irqs(struct build_feature_devs_info *binfo,
*/
static int
create_feature_instance(struct build_feature_devs_info *binfo,
- struct dfl_fpga_enum_dfl *dfl, resource_size_t ofst,
- resource_size_t size, u16 fid)
+ resource_size_t ofst, resource_size_t size, u16 fid)
{
unsigned int irq_base, nr_irqs;
struct dfl_feature_info *finfo;
int ret;
/* read feature size and id if inputs are invalid */
- size = size ? size : feature_size(dfl->ioaddr + ofst);
- fid = fid ? fid : feature_id(dfl->ioaddr + ofst);
+ size = size ? size : feature_size(binfo->ioaddr + ofst);
+ fid = fid ? fid : feature_id(binfo->ioaddr + ofst);
- if (dfl->len - ofst < size)
+ if (binfo->len - ofst < size)
return -EINVAL;
ret = parse_feature_irqs(binfo, ofst, fid, &irq_base, &nr_irqs);
@@ -770,12 +794,11 @@ create_feature_instance(struct build_feature_devs_info *binfo,
return -ENOMEM;
finfo->fid = fid;
- finfo->mmio_res.start = dfl->start + ofst;
+ finfo->mmio_res.start = binfo->start + ofst;
finfo->mmio_res.end = finfo->mmio_res.start + size - 1;
finfo->mmio_res.flags = IORESOURCE_MEM;
finfo->irq_base = irq_base;
finfo->nr_irqs = nr_irqs;
- finfo->ioaddr = dfl->ioaddr + ofst;
list_add_tail(&finfo->node, &binfo->sub_features);
binfo->feature_num++;
@@ -784,7 +807,6 @@ create_feature_instance(struct build_feature_devs_info *binfo,
}
static int parse_feature_port_afu(struct build_feature_devs_info *binfo,
- struct dfl_fpga_enum_dfl *dfl,
resource_size_t ofst)
{
u64 v = readq(binfo->ioaddr + PORT_HDR_CAP);
@@ -792,21 +814,22 @@ static int parse_feature_port_afu(struct build_feature_devs_info *binfo,
WARN_ON(!size);
- return create_feature_instance(binfo, dfl, ofst, size, FEATURE_ID_AFU);
+ return create_feature_instance(binfo, ofst, size, FEATURE_ID_AFU);
}
+#define is_feature_dev_detected(binfo) (!!(binfo)->feature_dev)
+
static int parse_feature_afu(struct build_feature_devs_info *binfo,
- struct dfl_fpga_enum_dfl *dfl,
resource_size_t ofst)
{
- if (!binfo->feature_dev) {
+ if (!is_feature_dev_detected(binfo)) {
dev_err(binfo->dev, "this AFU does not belong to any FIU.\n");
return -EINVAL;
}
switch (feature_dev_id_type(binfo->feature_dev)) {
case PORT_ID:
- return parse_feature_port_afu(binfo, dfl, ofst);
+ return parse_feature_port_afu(binfo, ofst);
default:
dev_info(binfo->dev, "AFU belonging to FIU %s is not supported yet.\n",
binfo->feature_dev->name);
@@ -815,8 +838,40 @@ static int parse_feature_afu(struct build_feature_devs_info *binfo,
return 0;
}
+static int dfl_binfo_prepare(struct build_feature_devs_info *binfo,
+ resource_size_t start, resource_size_t len)
+{
+ struct device *dev = binfo->dev;
+ void __iomem *ioaddr;
+
+ if (!devm_request_mem_region(dev, start, len, dev_name(dev))) {
+ dev_err(dev, "request region fail, start:%pa, len:%pa\n",
+ &start, &len);
+ return -EBUSY;
+ }
+
+ ioaddr = devm_ioremap(dev, start, len);
+ if (!ioaddr) {
+ dev_err(dev, "ioremap region fail, start:%pa, len:%pa\n",
+ &start, &len);
+ devm_release_mem_region(dev, start, len);
+ return -ENOMEM;
+ }
+
+ binfo->start = start;
+ binfo->len = len;
+ binfo->ioaddr = ioaddr;
+
+ return 0;
+}
+
+static void dfl_binfo_complete(struct build_feature_devs_info *binfo)
+{
+ devm_iounmap(binfo->dev, binfo->ioaddr);
+ devm_release_mem_region(binfo->dev, binfo->start, binfo->len);
+}
+
static int parse_feature_fiu(struct build_feature_devs_info *binfo,
- struct dfl_fpga_enum_dfl *dfl,
resource_size_t ofst)
{
int ret = 0;
@@ -824,27 +879,39 @@ static int parse_feature_fiu(struct build_feature_devs_info *binfo,
u16 id;
u64 v;
- v = readq(dfl->ioaddr + ofst + DFH);
+ if (is_feature_dev_detected(binfo)) {
+ dfl_binfo_complete(binfo);
+
+ ret = build_info_commit_dev(binfo);
+ if (ret)
+ return ret;
+
+ ret = dfl_binfo_prepare(binfo, binfo->start + ofst,
+ binfo->len - ofst);
+ if (ret)
+ return ret;
+ }
+
+ v = readq(binfo->ioaddr + DFH);
id = FIELD_GET(DFH_ID, v);
/* create platform device for dfl feature dev */
- ret = build_info_create_dev(binfo, dfh_id_to_type(id),
- dfl->ioaddr + ofst);
+ ret = build_info_create_dev(binfo, dfh_id_to_type(id));
if (ret)
return ret;
- ret = create_feature_instance(binfo, dfl, ofst, 0, 0);
+ ret = create_feature_instance(binfo, 0, 0, 0);
if (ret)
return ret;
/*
* find and parse FIU's child AFU via its NEXT_AFU register.
* please note that only Port has valid NEXT_AFU pointer per spec.
*/
- v = readq(dfl->ioaddr + ofst + NEXT_AFU);
+ v = readq(binfo->ioaddr + NEXT_AFU);
offset = FIELD_GET(NEXT_AFU_NEXT_DFH_OFST, v);
if (offset)
- return parse_feature_afu(binfo, dfl, ofst + offset);
+ return parse_feature_afu(binfo, offset);
dev_dbg(binfo->dev, "No AFUs detected on FIU %d\n", id);
@@ -852,16 +919,15 @@ static int parse_feature_fiu(struct build_feature_devs_info *binfo,
}
static int parse_feature_private(struct build_feature_devs_info *binfo,
- struct dfl_fpga_enum_dfl *dfl,
resource_size_t ofst)
{
- if (!binfo->feature_dev) {
+ if (!is_feature_dev_detected(binfo)) {
dev_err(binfo->dev, "the private feature 0x%x does not belong to any AFU.\n",
- feature_id(dfl->ioaddr + ofst));
+ feature_id(binfo->ioaddr + ofst));
return -EINVAL;
}
- return create_feature_instance(binfo, dfl, ofst, 0, 0);
+ return create_feature_instance(binfo, ofst, 0, 0);
}
/**
@@ -869,24 +935,24 @@ static int parse_feature_private(struct build_feature_devs_info *binfo,
*
* @binfo: build feature devices information.
* @dfl: device feature list to parse
- * @ofst: offset to feature header on this device feature list
+ * @ofst: offset to current FIU header
*/
static int parse_feature(struct build_feature_devs_info *binfo,
- struct dfl_fpga_enum_dfl *dfl, resource_size_t ofst)
+ resource_size_t ofst)
{
u64 v;
u32 type;
- v = readq(dfl->ioaddr + ofst + DFH);
+ v = readq(binfo->ioaddr + ofst + DFH);
type = FIELD_GET(DFH_TYPE, v);
switch (type) {
case DFH_TYPE_AFU:
- return parse_feature_afu(binfo, dfl, ofst);
+ return parse_feature_afu(binfo, ofst);
case DFH_TYPE_PRIVATE:
- return parse_feature_private(binfo, dfl, ofst);
+ return parse_feature_private(binfo, ofst);
case DFH_TYPE_FIU:
- return parse_feature_fiu(binfo, dfl, ofst);
+ return parse_feature_fiu(binfo, ofst);
default:
dev_info(binfo->dev,
"Feature Type %x is not supported.\n", type);
@@ -896,14 +962,17 @@ static int parse_feature(struct build_feature_devs_info *binfo,
}
static int parse_feature_list(struct build_feature_devs_info *binfo,
- struct dfl_fpga_enum_dfl *dfl)
+ resource_size_t start, resource_size_t len)
{
- void __iomem *start = dfl->ioaddr;
- void __iomem *end = dfl->ioaddr + dfl->len;
+ resource_size_t end = start + len;
int ret = 0;
u32 ofst = 0;
u64 v;
+ ret = dfl_binfo_prepare(binfo, start, len);
+ if (ret)
+ return ret;
+
/* walk through the device feature list via DFH's next DFH pointer. */
for (; start < end; start += ofst) {
if (end - start < DFH_SIZE) {
@@ -911,11 +980,11 @@ static int parse_feature_list(struct build_feature_devs_info *binfo,
return -EINVAL;
}
- ret = parse_feature(binfo, dfl, start - dfl->ioaddr);
+ ret = parse_feature(binfo, start - binfo->start);
if (ret)
return ret;
- v = readq(start + DFH);
+ v = readq(binfo->ioaddr + start - binfo->start + DFH);
ofst = FIELD_GET(DFH_NEXT_HDR_OFST, v);
/* stop parsing if EOL(End of List) is set or offset is 0 */
@@ -924,7 +993,12 @@ static int parse_feature_list(struct build_feature_devs_info *binfo,
}
/* commit current feature device when reach the end of list */
- return build_info_commit_dev(binfo);
+ dfl_binfo_complete(binfo);
+
+ if (is_feature_dev_detected(binfo))
+ ret = build_info_commit_dev(binfo);
+
+ return ret;
}
struct dfl_fpga_enum_info *dfl_fpga_enum_info_alloc(struct device *dev)
@@ -977,7 +1051,6 @@ EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_free);
* @info: ptr to dfl_fpga_enum_info
* @start: mmio resource address of the device feature list.
* @len: mmio resource length of the device feature list.
- * @ioaddr: mapped mmio resource address of the device feature list.
*
* One FPGA device may have one or more Device Feature Lists (DFLs), use this
* function to add information of each DFL to common data structure for next
@@ -986,8 +1059,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_free);
* Return: 0 on success, negative error code otherwise.
*/
int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
- resource_size_t start, resource_size_t len,
- void __iomem *ioaddr)
+ resource_size_t start, resource_size_t len)
{
struct dfl_fpga_enum_dfl *dfl;
@@ -997,7 +1069,6 @@ int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
dfl->start = start;
dfl->len = len;
- dfl->ioaddr = ioaddr;
list_add_tail(&dfl->node, &info->dfls);
@@ -1120,7 +1191,7 @@ dfl_fpga_feature_devs_enumerate(struct dfl_fpga_enum_info *info)
* Lists.
*/
list_for_each_entry(dfl, &info->dfls, node) {
- ret = parse_feature_list(binfo, dfl);
+ ret = parse_feature_list(binfo, dfl->start, dfl->len);
if (ret) {
remove_feature_devs(cdev);
build_info_free(binfo);
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index bc61942..5973769 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -441,22 +441,17 @@ struct dfl_fpga_enum_info {
*
* @start: base address of this device feature list.
* @len: size of this device feature list.
- * @ioaddr: mapped base address of this device feature list.
* @node: node in list of device feature lists.
*/
struct dfl_fpga_enum_dfl {
resource_size_t start;
resource_size_t len;
-
- void __iomem *ioaddr;
-
struct list_head node;
};
struct dfl_fpga_enum_info *dfl_fpga_enum_info_alloc(struct device *dev);
int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
- resource_size_t start, resource_size_t len,
- void __iomem *ioaddr);
+ resource_size_t start, resource_size_t len);
int dfl_fpga_enum_info_add_irq(struct dfl_fpga_enum_info *info,
unsigned int nr_irqs, int *irq_table);
void dfl_fpga_enum_info_free(struct dfl_fpga_enum_info *info);
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* RE: [PATCH v3 2/4] fpga: dfl: map feature mmio resources in their own feature drivers
2020-08-04 7:05 ` [PATCH v3 2/4] fpga: dfl: map feature mmio resources in their own feature drivers Xu Yilun
@ 2020-08-05 12:15 ` Wu, Hao
2020-08-06 2:43 ` Xu Yilun
0 siblings, 1 reply; 18+ messages in thread
From: Wu, Hao @ 2020-08-05 12:15 UTC (permalink / raw)
To: Xu, Yilun, mdf, linux-fpga, linux-kernel
Cc: trix, lgoncalv, Matthew Gerlach, Weight, Russell H
> Subject: [PATCH v3 2/4] fpga: dfl: map feature mmio resources in their own
> feature drivers
>
> This patch makes preparation for modularization of DFL sub feature
> drivers.
>
> Currently, if we need to support a new DFL sub feature, an entry should
> be added to fme/port_feature_drvs[] in dfl-fme/port-main.c. And we need
> to re-compile the whole DFL modules. That make the DFL drivers hard to be
> extended.
>
> Another consideration is that DFL may contain some IP blocks which are
> already supported by kernel, most of them are supported by platform
> device drivers. We could create platform devices for these IP blocks and
> get them supported by these drivers.
>
> An important issue is that platform device drivers usually requests mmio
> resources on probe. But now dfl mmio is mapped in dfl bus driver (e.g.
> dfl-pci) as a whole region. Then platform device drivers for sub features
> can't request their own mmio resources again. This is what the patch
> trying to resolve.
>
> This patch changes the DFL enumeration. DFL bus driver will unmap mmio
> resources after first step enumeration and pass enumeration info to DFL
> framework. Then DFL framework will map the mmio resources again, do 2nd
> step enumeration, and also unmap the mmio resources. In this way, sub
> feature drivers could then request their own mmio resources as needed.
>
> An exception is that mmio resource of FIU headers are still mapped in dfl
> bus driver. The FIU headers have some fundamental functions (sriov set,
> port enable/disable) needed for dfl bus devices and other sub features.
> They should not be unmapped as long as dfl bus device is alive.
>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> Signed-off-by: Wu Hao <hao.wu@intel.com>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> Reviewed-by: Tom Rix <trix@redhat.com>
> ---
> v2: delete dfl_binfo_shift() cause no shift is possible for FIU parsing.
> Only map bar0 for first phase enumeration in dfl-pci, we can find
> all dfl mmio resource info in bar0.
> Some minor fixes for comments from Hao & Tom.
> v3: no change.
> ---
> drivers/fpga/dfl-pci.c | 24 +++----
> drivers/fpga/dfl.c | 185 ++++++++++++++++++++++++++++++++++------------
> ---
> drivers/fpga/dfl.h | 7 +-
> 3 files changed, 140 insertions(+), 76 deletions(-)
>
> diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
> index e220bec..a2203d0 100644
> --- a/drivers/fpga/dfl-pci.c
> +++ b/drivers/fpga/dfl-pci.c
> @@ -31,12 +31,12 @@ struct cci_drvdata {
> struct dfl_fpga_cdev *cdev; /* container device */
> };
>
> -static void __iomem *cci_pci_ioremap_bar(struct pci_dev *pcidev, int bar)
> +static void __iomem *cci_pci_ioremap_bar0(struct pci_dev *pcidev)
> {
> - if (pcim_iomap_regions(pcidev, BIT(bar), DRV_NAME))
> + if (pcim_iomap_regions(pcidev, BIT(0), DRV_NAME))
> return NULL;
>
> - return pcim_iomap_table(pcidev)[bar];
> + return pcim_iomap_table(pcidev)[0];
> }
>
> static int cci_pci_alloc_irq(struct pci_dev *pcidev)
> @@ -156,8 +156,8 @@ static int cci_enumerate_feature_devs(struct pci_dev
> *pcidev)
> goto irq_free_exit;
> }
>
> - /* start to find Device Feature List from Bar 0 */
> - base = cci_pci_ioremap_bar(pcidev, 0);
> + /* start to find Device Feature List in Bar 0 */
> + base = cci_pci_ioremap_bar0(pcidev);
> if (!base) {
> ret = -ENOMEM;
> goto irq_free_exit;
> @@ -172,7 +172,7 @@ static int cci_enumerate_feature_devs(struct pci_dev
> *pcidev)
> start = pci_resource_start(pcidev, 0);
> len = pci_resource_len(pcidev, 0);
>
> - dfl_fpga_enum_info_add_dfl(info, start, len, base);
> + dfl_fpga_enum_info_add_dfl(info, start, len);
>
> /*
> * find more Device Feature Lists (e.g. Ports) per information
> @@ -196,26 +196,24 @@ static int cci_enumerate_feature_devs(struct
> pci_dev *pcidev)
> */
> bar = FIELD_GET(FME_PORT_OFST_BAR_ID, v);
> offset = FIELD_GET(FME_PORT_OFST_DFH_OFST, v);
> - base = cci_pci_ioremap_bar(pcidev, bar);
> - if (!base)
> - continue;
> -
> start = pci_resource_start(pcidev, bar) + offset;
> len = pci_resource_len(pcidev, bar) - offset;
>
> - dfl_fpga_enum_info_add_dfl(info, start, len,
> - base + offset);
> + dfl_fpga_enum_info_add_dfl(info, start, len);
> }
> } else if (dfl_feature_is_port(base)) {
> start = pci_resource_start(pcidev, 0);
> len = pci_resource_len(pcidev, 0);
>
> - dfl_fpga_enum_info_add_dfl(info, start, len, base);
> + dfl_fpga_enum_info_add_dfl(info, start, len);
> } else {
> ret = -ENODEV;
> goto irq_free_exit;
> }
>
> + /* release I/O mappings for next step enumeration */
> + pcim_iounmap_regions(pcidev, BIT(0));
> +
> /* start enumeration with prepared enumeration information */
> cdev = dfl_fpga_feature_devs_enumerate(info);
> if (IS_ERR(cdev)) {
> diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
> index 18575d9..c649239 100644
> --- a/drivers/fpga/dfl.c
> +++ b/drivers/fpga/dfl.c
> @@ -250,6 +250,8 @@ int dfl_fpga_check_port_id(struct platform_device
> *pdev, void *pport_id)
> }
> EXPORT_SYMBOL_GPL(dfl_fpga_check_port_id);
>
> +#define is_header_feature(feature) ((feature)->id ==
> FEATURE_ID_FIU_HEADER)
> +
> /**
> * dfl_fpga_dev_feature_uinit - uinit for sub features of dfl feature device
> * @pdev: feature device.
> @@ -273,8 +275,22 @@ static int dfl_feature_instance_init(struct
> platform_device *pdev,
> struct dfl_feature *feature,
> struct dfl_feature_driver *drv)
> {
> + void __iomem *base;
> int ret = 0;
>
> + if (!is_header_feature(feature)) {
> + base = devm_platform_ioremap_resource(pdev,
> + feature->resource_index);
> + if (IS_ERR(base)) {
> + dev_err(&pdev->dev,
> + "ioremap failed for feature 0x%x!\n",
> + feature->id);
> + return PTR_ERR(base);
> + }
> +
> + feature->ioaddr = base;
> + }
> +
> if (drv->ops->init) {
> ret = drv->ops->init(pdev, feature);
> if (ret)
> @@ -427,7 +443,9 @@ EXPORT_SYMBOL_GPL(dfl_fpga_dev_ops_unregister);
> * @irq_table: Linux IRQ numbers for all irqs, indexed by local irq index of
> * this device.
> * @feature_dev: current feature device.
> - * @ioaddr: header register region address of feature device in enumeration.
> + * @ioaddr: header register region address of current FIU in enumeration.
> + * @start: register resource start of current FIU.
> + * @len: max register resource length of current FIU.
> * @sub_features: a sub features linked list for feature device in
> enumeration.
> * @feature_num: number of sub features for feature device in
> enumeration.
> */
> @@ -439,6 +457,8 @@ struct build_feature_devs_info {
>
> struct platform_device *feature_dev;
> void __iomem *ioaddr;
> + resource_size_t start;
> + resource_size_t len;
> struct list_head sub_features;
> int feature_num;
> };
> @@ -484,10 +504,7 @@ static int build_info_commit_dev(struct
> build_feature_devs_info *binfo)
> struct dfl_feature_platform_data *pdata;
> struct dfl_feature_info *finfo, *p;
> enum dfl_id_type type;
> - int ret, index = 0;
> -
> - if (!fdev)
> - return 0;
> + int ret, index = 0, res_idx = 0;
>
> type = feature_dev_id_type(fdev);
> if (WARN_ON_ONCE(type >= DFL_ID_MAX))
> @@ -530,16 +547,30 @@ static int build_info_commit_dev(struct
> build_feature_devs_info *binfo)
>
> /* fill features and resource information for feature dev */
> list_for_each_entry_safe(finfo, p, &binfo->sub_features, node) {
> - struct dfl_feature *feature = &pdata->features[index];
> + struct dfl_feature *feature = &pdata->features[index++];
> struct dfl_feature_irq_ctx *ctx;
> unsigned int i;
>
> /* save resource information for each feature */
> feature->dev = fdev;
> feature->id = finfo->fid;
> - feature->resource_index = index;
> - feature->ioaddr = finfo->ioaddr;
> - fdev->resource[index++] = finfo->mmio_res;
> +
> + /*
> + * map header resource for dfl bus device. Don't add header
> + * resource to feature devices, or the resource tree will be
> + * disordered and cause warning on resource release
> + */
> + if (is_header_feature(feature)) {
> + feature->resource_index = -1;
> + feature->ioaddr =
> + devm_ioremap_resource(binfo->dev,
> + &finfo->mmio_res);
> + if (IS_ERR(feature->ioaddr))
> + return PTR_ERR(feature->ioaddr);
> + } else {
> + feature->resource_index = res_idx;
> + fdev->resource[res_idx++] = finfo->mmio_res;
> + }
>
> if (finfo->nr_irqs) {
> ctx = devm_kcalloc(binfo->dev, finfo->nr_irqs,
> @@ -582,19 +613,13 @@ static int build_info_commit_dev(struct
> build_feature_devs_info *binfo)
>
> static int
> build_info_create_dev(struct build_feature_devs_info *binfo,
> - enum dfl_id_type type, void __iomem *ioaddr)
> + enum dfl_id_type type)
> {
> struct platform_device *fdev;
> - int ret;
>
> if (type >= DFL_ID_MAX)
> return -EINVAL;
>
> - /* we will create a new device, commit current device first */
> - ret = build_info_commit_dev(binfo);
> - if (ret)
> - return ret;
> -
> /*
> * we use -ENODEV as the initialization indicator which indicates
> * whether the id need to be reclaimed
> @@ -605,7 +630,7 @@ build_info_create_dev(struct
> build_feature_devs_info *binfo,
>
> binfo->feature_dev = fdev;
> binfo->feature_num = 0;
> - binfo->ioaddr = ioaddr;
> +
> INIT_LIST_HEAD(&binfo->sub_features);
>
> fdev->id = dfl_id_alloc(type, &fdev->dev);
> @@ -747,18 +772,17 @@ static int parse_feature_irqs(struct
> build_feature_devs_info *binfo,
> */
> static int
> create_feature_instance(struct build_feature_devs_info *binfo,
> - struct dfl_fpga_enum_dfl *dfl, resource_size_t ofst,
> - resource_size_t size, u16 fid)
> + resource_size_t ofst, resource_size_t size, u16 fid)
> {
> unsigned int irq_base, nr_irqs;
> struct dfl_feature_info *finfo;
> int ret;
>
> /* read feature size and id if inputs are invalid */
> - size = size ? size : feature_size(dfl->ioaddr + ofst);
> - fid = fid ? fid : feature_id(dfl->ioaddr + ofst);
> + size = size ? size : feature_size(binfo->ioaddr + ofst);
> + fid = fid ? fid : feature_id(binfo->ioaddr + ofst);
>
> - if (dfl->len - ofst < size)
> + if (binfo->len - ofst < size)
> return -EINVAL;
>
> ret = parse_feature_irqs(binfo, ofst, fid, &irq_base, &nr_irqs);
> @@ -770,12 +794,11 @@ create_feature_instance(struct
> build_feature_devs_info *binfo,
> return -ENOMEM;
>
> finfo->fid = fid;
> - finfo->mmio_res.start = dfl->start + ofst;
> + finfo->mmio_res.start = binfo->start + ofst;
> finfo->mmio_res.end = finfo->mmio_res.start + size - 1;
> finfo->mmio_res.flags = IORESOURCE_MEM;
> finfo->irq_base = irq_base;
> finfo->nr_irqs = nr_irqs;
> - finfo->ioaddr = dfl->ioaddr + ofst;
>
> list_add_tail(&finfo->node, &binfo->sub_features);
> binfo->feature_num++;
> @@ -784,7 +807,6 @@ create_feature_instance(struct
> build_feature_devs_info *binfo,
> }
>
> static int parse_feature_port_afu(struct build_feature_devs_info *binfo,
> - struct dfl_fpga_enum_dfl *dfl,
> resource_size_t ofst)
> {
> u64 v = readq(binfo->ioaddr + PORT_HDR_CAP);
> @@ -792,21 +814,22 @@ static int parse_feature_port_afu(struct
> build_feature_devs_info *binfo,
>
> WARN_ON(!size);
>
> - return create_feature_instance(binfo, dfl, ofst, size,
> FEATURE_ID_AFU);
> + return create_feature_instance(binfo, ofst, size, FEATURE_ID_AFU);
> }
>
> +#define is_feature_dev_detected(binfo) (!!(binfo)->feature_dev)
> +
> static int parse_feature_afu(struct build_feature_devs_info *binfo,
> - struct dfl_fpga_enum_dfl *dfl,
> resource_size_t ofst)
> {
> - if (!binfo->feature_dev) {
> + if (!is_feature_dev_detected(binfo)) {
> dev_err(binfo->dev, "this AFU does not belong to any
> FIU.\n");
> return -EINVAL;
> }
>
> switch (feature_dev_id_type(binfo->feature_dev)) {
> case PORT_ID:
> - return parse_feature_port_afu(binfo, dfl, ofst);
> + return parse_feature_port_afu(binfo, ofst);
> default:
> dev_info(binfo->dev, "AFU belonging to FIU %s is not
> supported yet.\n",
> binfo->feature_dev->name);
> @@ -815,8 +838,40 @@ static int parse_feature_afu(struct
> build_feature_devs_info *binfo,
> return 0;
> }
>
> +static int dfl_binfo_prepare(struct build_feature_devs_info *binfo,
> + resource_size_t start, resource_size_t len)
> +{
> + struct device *dev = binfo->dev;
> + void __iomem *ioaddr;
> +
> + if (!devm_request_mem_region(dev, start, len, dev_name(dev))) {
> + dev_err(dev, "request region fail, start:%pa, len:%pa\n",
> + &start, &len);
> + return -EBUSY;
> + }
> +
> + ioaddr = devm_ioremap(dev, start, len);
> + if (!ioaddr) {
> + dev_err(dev, "ioremap region fail, start:%pa, len:%pa\n",
> + &start, &len);
> + devm_release_mem_region(dev, start, len);
as it's devm_request_mem_region, do we still need to release it here?
> + return -ENOMEM;
> + }
> +
> + binfo->start = start;
> + binfo->len = len;
> + binfo->ioaddr = ioaddr;
> +
> + return 0;
> +}
> +
> +static void dfl_binfo_complete(struct build_feature_devs_info *binfo)
> +{
> + devm_iounmap(binfo->dev, binfo->ioaddr);
> + devm_release_mem_region(binfo->dev, binfo->start, binfo->len);
> +}
> +
> static int parse_feature_fiu(struct build_feature_devs_info *binfo,
> - struct dfl_fpga_enum_dfl *dfl,
> resource_size_t ofst)
> {
> int ret = 0;
> @@ -824,27 +879,39 @@ static int parse_feature_fiu(struct
> build_feature_devs_info *binfo,
> u16 id;
> u64 v;
>
> - v = readq(dfl->ioaddr + ofst + DFH);
> + if (is_feature_dev_detected(binfo)) {
> + dfl_binfo_complete(binfo);
> +
> + ret = build_info_commit_dev(binfo);
> + if (ret)
> + return ret;
> +
> + ret = dfl_binfo_prepare(binfo, binfo->start + ofst,
> + binfo->len - ofst);
> + if (ret)
> + return ret;
> + }
> +
> + v = readq(binfo->ioaddr + DFH);
> id = FIELD_GET(DFH_ID, v);
>
> /* create platform device for dfl feature dev */
> - ret = build_info_create_dev(binfo, dfh_id_to_type(id),
> - dfl->ioaddr + ofst);
> + ret = build_info_create_dev(binfo, dfh_id_to_type(id));
> if (ret)
> return ret;
>
> - ret = create_feature_instance(binfo, dfl, ofst, 0, 0);
> + ret = create_feature_instance(binfo, 0, 0, 0);
> if (ret)
> return ret;
> /*
> * find and parse FIU's child AFU via its NEXT_AFU register.
> * please note that only Port has valid NEXT_AFU pointer per spec.
> */
> - v = readq(dfl->ioaddr + ofst + NEXT_AFU);
> + v = readq(binfo->ioaddr + NEXT_AFU);
>
> offset = FIELD_GET(NEXT_AFU_NEXT_DFH_OFST, v);
> if (offset)
> - return parse_feature_afu(binfo, dfl, ofst + offset);
> + return parse_feature_afu(binfo, offset);
>
> dev_dbg(binfo->dev, "No AFUs detected on FIU %d\n", id);
>
> @@ -852,16 +919,15 @@ static int parse_feature_fiu(struct
> build_feature_devs_info *binfo,
> }
>
> static int parse_feature_private(struct build_feature_devs_info *binfo,
> - struct dfl_fpga_enum_dfl *dfl,
> resource_size_t ofst)
> {
> - if (!binfo->feature_dev) {
> + if (!is_feature_dev_detected(binfo)) {
> dev_err(binfo->dev, "the private feature 0x%x does not
> belong to any AFU.\n",
> - feature_id(dfl->ioaddr + ofst));
> + feature_id(binfo->ioaddr + ofst));
> return -EINVAL;
> }
>
> - return create_feature_instance(binfo, dfl, ofst, 0, 0);
> + return create_feature_instance(binfo, ofst, 0, 0);
> }
>
> /**
> @@ -869,24 +935,24 @@ static int parse_feature_private(struct
> build_feature_devs_info *binfo,
> *
> * @binfo: build feature devices information.
> * @dfl: device feature list to parse
Remove this line.
Other place looks good to me.
Thanks
Hao
> - * @ofst: offset to feature header on this device feature list
> + * @ofst: offset to current FIU header
> */
> static int parse_feature(struct build_feature_devs_info *binfo,
> - struct dfl_fpga_enum_dfl *dfl, resource_size_t ofst)
> + resource_size_t ofst)
> {
> u64 v;
> u32 type;
>
> - v = readq(dfl->ioaddr + ofst + DFH);
> + v = readq(binfo->ioaddr + ofst + DFH);
> type = FIELD_GET(DFH_TYPE, v);
>
> switch (type) {
> case DFH_TYPE_AFU:
> - return parse_feature_afu(binfo, dfl, ofst);
> + return parse_feature_afu(binfo, ofst);
> case DFH_TYPE_PRIVATE:
> - return parse_feature_private(binfo, dfl, ofst);
> + return parse_feature_private(binfo, ofst);
> case DFH_TYPE_FIU:
> - return parse_feature_fiu(binfo, dfl, ofst);
> + return parse_feature_fiu(binfo, ofst);
> default:
> dev_info(binfo->dev,
> "Feature Type %x is not supported.\n", type);
> @@ -896,14 +962,17 @@ static int parse_feature(struct
> build_feature_devs_info *binfo,
> }
>
> static int parse_feature_list(struct build_feature_devs_info *binfo,
> - struct dfl_fpga_enum_dfl *dfl)
> + resource_size_t start, resource_size_t len)
> {
> - void __iomem *start = dfl->ioaddr;
> - void __iomem *end = dfl->ioaddr + dfl->len;
> + resource_size_t end = start + len;
> int ret = 0;
> u32 ofst = 0;
> u64 v;
>
> + ret = dfl_binfo_prepare(binfo, start, len);
> + if (ret)
> + return ret;
> +
> /* walk through the device feature list via DFH's next DFH pointer. */
> for (; start < end; start += ofst) {
> if (end - start < DFH_SIZE) {
> @@ -911,11 +980,11 @@ static int parse_feature_list(struct
> build_feature_devs_info *binfo,
> return -EINVAL;
> }
>
> - ret = parse_feature(binfo, dfl, start - dfl->ioaddr);
> + ret = parse_feature(binfo, start - binfo->start);
> if (ret)
> return ret;
>
> - v = readq(start + DFH);
> + v = readq(binfo->ioaddr + start - binfo->start + DFH);
> ofst = FIELD_GET(DFH_NEXT_HDR_OFST, v);
>
> /* stop parsing if EOL(End of List) is set or offset is 0 */
> @@ -924,7 +993,12 @@ static int parse_feature_list(struct
> build_feature_devs_info *binfo,
> }
>
> /* commit current feature device when reach the end of list */
> - return build_info_commit_dev(binfo);
> + dfl_binfo_complete(binfo);
> +
> + if (is_feature_dev_detected(binfo))
> + ret = build_info_commit_dev(binfo);
> +
> + return ret;
> }
>
> struct dfl_fpga_enum_info *dfl_fpga_enum_info_alloc(struct device *dev)
> @@ -977,7 +1051,6 @@ EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_free);
> * @info: ptr to dfl_fpga_enum_info
> * @start: mmio resource address of the device feature list.
> * @len: mmio resource length of the device feature list.
> - * @ioaddr: mapped mmio resource address of the device feature list.
> *
> * One FPGA device may have one or more Device Feature Lists (DFLs), use
> this
> * function to add information of each DFL to common data structure for
> next
> @@ -986,8 +1059,7 @@ EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_free);
> * Return: 0 on success, negative error code otherwise.
> */
> int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
> - resource_size_t start, resource_size_t len,
> - void __iomem *ioaddr)
> + resource_size_t start, resource_size_t len)
> {
> struct dfl_fpga_enum_dfl *dfl;
>
> @@ -997,7 +1069,6 @@ int dfl_fpga_enum_info_add_dfl(struct
> dfl_fpga_enum_info *info,
>
> dfl->start = start;
> dfl->len = len;
> - dfl->ioaddr = ioaddr;
>
> list_add_tail(&dfl->node, &info->dfls);
>
> @@ -1120,7 +1191,7 @@ dfl_fpga_feature_devs_enumerate(struct
> dfl_fpga_enum_info *info)
> * Lists.
> */
> list_for_each_entry(dfl, &info->dfls, node) {
> - ret = parse_feature_list(binfo, dfl);
> + ret = parse_feature_list(binfo, dfl->start, dfl->len);
> if (ret) {
> remove_feature_devs(cdev);
> build_info_free(binfo);
> diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
> index bc61942..5973769 100644
> --- a/drivers/fpga/dfl.h
> +++ b/drivers/fpga/dfl.h
> @@ -441,22 +441,17 @@ struct dfl_fpga_enum_info {
> *
> * @start: base address of this device feature list.
> * @len: size of this device feature list.
> - * @ioaddr: mapped base address of this device feature list.
> * @node: node in list of device feature lists.
> */
> struct dfl_fpga_enum_dfl {
> resource_size_t start;
> resource_size_t len;
> -
> - void __iomem *ioaddr;
> -
> struct list_head node;
> };
>
> struct dfl_fpga_enum_info *dfl_fpga_enum_info_alloc(struct device *dev);
> int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
> - resource_size_t start, resource_size_t len,
> - void __iomem *ioaddr);
> + resource_size_t start, resource_size_t len);
> int dfl_fpga_enum_info_add_irq(struct dfl_fpga_enum_info *info,
> unsigned int nr_irqs, int *irq_table);
> void dfl_fpga_enum_info_free(struct dfl_fpga_enum_info *info);
> --
> 2.7.4
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v3 2/4] fpga: dfl: map feature mmio resources in their own feature drivers
2020-08-05 12:15 ` Wu, Hao
@ 2020-08-06 2:43 ` Xu Yilun
0 siblings, 0 replies; 18+ messages in thread
From: Xu Yilun @ 2020-08-06 2:43 UTC (permalink / raw)
To: Wu, Hao
Cc: mdf, linux-fpga, linux-kernel, trix, lgoncalv, Matthew Gerlach,
Weight, Russell H
On Wed, Aug 05, 2020 at 08:15:27PM +0800, Wu, Hao wrote:
> > Subject: [PATCH v3 2/4] fpga: dfl: map feature mmio resources in their own
> > feature drivers
> >
> > +static int dfl_binfo_prepare(struct build_feature_devs_info *binfo,
> > + resource_size_t start, resource_size_t len)
> > +{
> > +struct device *dev = binfo->dev;
> > +void __iomem *ioaddr;
> > +
> > +if (!devm_request_mem_region(dev, start, len, dev_name(dev))) {
> > +dev_err(dev, "request region fail, start:%pa, len:%pa\n",
> > +&start, &len);
> > +return -EBUSY;
> > +}
> > +
> > +ioaddr = devm_ioremap(dev, start, len);
> > +if (!ioaddr) {
> > +dev_err(dev, "ioremap region fail, start:%pa, len:%pa\n",
> > +&start, &len);
> > +devm_release_mem_region(dev, start, len);
>
> as it's devm_request_mem_region, do we still need to release it here?
Yes, I could delete it.
> > @@ -869,24 +935,24 @@ static int parse_feature_private(struct
> > build_feature_devs_info *binfo,
> > *
> > * @binfo: build feature devices information.
> > * @dfl: device feature list to parse
>
> Remove this line.
Yes.
Thanks,
Yilun.
>
> Other place looks good to me.
>
> Thanks
> Hao
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices
2020-08-04 7:05 [PATCH v3 0/4] Modularization of DFL private feature drivers Xu Yilun
2020-08-04 7:05 ` [PATCH v3 1/4] fpga: dfl: change data type of feature id to u16 Xu Yilun
2020-08-04 7:05 ` [PATCH v3 2/4] fpga: dfl: map feature mmio resources in their own feature drivers Xu Yilun
@ 2020-08-04 7:05 ` Xu Yilun
2020-08-05 10:29 ` Wu, Hao
2020-08-04 7:05 ` [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature Xu Yilun
3 siblings, 1 reply; 18+ messages in thread
From: Xu Yilun @ 2020-08-04 7:05 UTC (permalink / raw)
To: mdf, linux-fpga, linux-kernel
Cc: trix, lgoncalv, yilun.xu, Wu Hao, Matthew Gerlach, Russ Weight
A new bus type "dfl" is introduced for private features which are not
initialized by DFL feature drivers (dfl-fme & dfl-afu drivers). So these
private features could be handled by separate driver modules.
DFL feature drivers (dfl-fme, dfl-port) will create DFL devices on
enumeration. DFL drivers could be registered on this bus to match these
DFL devices. They are matched by dfl type & feature_id.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
---
v2: change the bus uevent format.
change the dfl device's sysfs name format.
refactor dfl_dev_add().
minor fixes for comments from Hao and Tom.
v3: no change.
---
Documentation/ABI/testing/sysfs-bus-dfl | 15 ++
drivers/fpga/dfl.c | 254 +++++++++++++++++++++++++++++++-
drivers/fpga/dfl.h | 84 +++++++++++
3 files changed, 345 insertions(+), 8 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-dfl
diff --git a/Documentation/ABI/testing/sysfs-bus-dfl b/Documentation/ABI/testing/sysfs-bus-dfl
new file mode 100644
index 0000000..b1eea30
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-dfl
@@ -0,0 +1,15 @@
+What: /sys/bus/dfl/devices/.../type
+Date: July 2020
+KernelVersion: 5.9
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read-only. It returns type of DFL FIU of the device. Now DFL
+ supports 2 FIU types, 0 for FME, 1 for PORT.
+ Format: 0x%x
+
+What: /sys/bus/dfl/devices/.../feature_id
+Date: July 2020
+KernelVersion: 5.9
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read-only. It returns feature identifier local to its DFL FIU
+ type.
+ Format: 0x%x
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index c649239..978d182 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -30,12 +30,6 @@ static DEFINE_MUTEX(dfl_id_mutex);
* index to dfl_chardevs table. If no chardev support just set devt_type
* as one invalid index (DFL_FPGA_DEVT_MAX).
*/
-enum dfl_id_type {
- FME_ID, /* fme id allocation and mapping */
- PORT_ID, /* port id allocation and mapping */
- DFL_ID_MAX,
-};
-
enum dfl_fpga_devt_type {
DFL_FPGA_DEVT_FME,
DFL_FPGA_DEVT_PORT,
@@ -250,6 +244,236 @@ int dfl_fpga_check_port_id(struct platform_device *pdev, void *pport_id)
}
EXPORT_SYMBOL_GPL(dfl_fpga_check_port_id);
+static DEFINE_IDA(dfl_device_ida);
+
+static const struct dfl_device_id *
+dfl_match_one_device(const struct dfl_device_id *id, struct dfl_device *ddev)
+{
+ if (id->type == ddev->type && id->feature_id == ddev->feature_id)
+ return id;
+
+ return NULL;
+}
+
+static int dfl_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct dfl_device *ddev = to_dfl_dev(dev);
+ struct dfl_driver *ddrv = to_dfl_drv(drv);
+ const struct dfl_device_id *id_entry = ddrv->id_table;
+
+ if (id_entry) {
+ while (id_entry->feature_id) {
+ if (dfl_match_one_device(id_entry, ddev)) {
+ ddev->id_entry = id_entry;
+ return 1;
+ }
+ id_entry++;
+ }
+ }
+
+ return 0;
+}
+
+static int dfl_bus_probe(struct device *dev)
+{
+ struct dfl_device *ddev = to_dfl_dev(dev);
+ struct dfl_driver *ddrv = to_dfl_drv(dev->driver);
+
+ return ddrv->probe(ddev);
+}
+
+static int dfl_bus_remove(struct device *dev)
+{
+ struct dfl_device *ddev = to_dfl_dev(dev);
+ struct dfl_driver *ddrv = to_dfl_drv(dev->driver);
+
+ if (ddrv->remove)
+ ddrv->remove(ddev);
+
+ return 0;
+}
+
+static int dfl_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct dfl_device *ddev = to_dfl_dev(dev);
+
+ return add_uevent_var(env, "MODALIAS=dfl:t%08Xf%04X",
+ ddev->type, ddev->feature_id);
+}
+
+/* show dfl info fields */
+#define dfl_info_attr(field, format_string) \
+static ssize_t \
+field##_show(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct dfl_device *ddev = to_dfl_dev(dev); \
+ \
+ return sprintf(buf, format_string, ddev->field); \
+} \
+static DEVICE_ATTR_RO(field)
+
+dfl_info_attr(type, "0x%x\n");
+dfl_info_attr(feature_id, "0x%x\n");
+
+static struct attribute *dfl_dev_attrs[] = {
+ &dev_attr_type.attr,
+ &dev_attr_feature_id.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(dfl_dev);
+
+static struct bus_type dfl_bus_type = {
+ .name = "dfl",
+ .match = dfl_bus_match,
+ .probe = dfl_bus_probe,
+ .remove = dfl_bus_remove,
+ .uevent = dfl_bus_uevent,
+ .dev_groups = dfl_dev_groups,
+};
+
+static void release_dfl_dev(struct device *dev)
+{
+ struct dfl_device *ddev = to_dfl_dev(dev);
+
+ if (ddev->mmio_res.parent)
+ release_resource(&ddev->mmio_res);
+
+ ida_simple_remove(&dfl_device_ida, ddev->id);
+ kfree(ddev->irqs);
+ kfree(ddev);
+}
+
+static struct dfl_device *
+dfl_dev_add(struct dfl_feature_platform_data *pdata,
+ struct dfl_feature *feature)
+{
+ struct platform_device *pdev = pdata->dev;
+ struct resource *parent_res;
+ struct dfl_device *ddev;
+ int id, i, ret;
+
+ ddev = kzalloc(sizeof(*ddev), GFP_KERNEL);
+ if (!ddev)
+ return ERR_PTR(-ENOMEM);
+
+ id = ida_simple_get(&dfl_device_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ dev_err(&pdev->dev, "unable to get id\n");
+ kfree(ddev);
+ return ERR_PTR(id);
+ }
+
+ /* freeing resources by put_device() after device_initialize() */
+ device_initialize(&ddev->dev);
+ ddev->dev.parent = &pdev->dev;
+ ddev->dev.bus = &dfl_bus_type;
+ ddev->dev.release = release_dfl_dev;
+ ddev->id = id;
+ ret = dev_set_name(&ddev->dev, "dfl_dev.%d", id);
+ if (ret)
+ goto put_dev;
+
+ ddev->type = feature_dev_id_type(pdev);
+ ddev->feature_id = feature->id;
+ ddev->cdev = pdata->dfl_cdev;
+
+ /* add mmio resource */
+ parent_res = &pdev->resource[feature->resource_index];
+ ddev->mmio_res.flags = IORESOURCE_MEM;
+ ddev->mmio_res.start = parent_res->start;
+ ddev->mmio_res.end = parent_res->end;
+ ddev->mmio_res.name = dev_name(&ddev->dev);
+ ret = insert_resource(parent_res, &ddev->mmio_res);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed to claim resource: %pR\n",
+ dev_name(&ddev->dev), &ddev->mmio_res);
+ goto put_dev;
+ }
+
+ /* then add irq resource */
+ if (feature->nr_irqs) {
+ ddev->irqs = kcalloc(feature->nr_irqs,
+ sizeof(*ddev->irqs), GFP_KERNEL);
+ if (!ddev->irqs) {
+ ret = -ENOMEM;
+ goto put_dev;
+ }
+
+ for (i = 0; i < feature->nr_irqs; i++)
+ ddev->irqs[i] = feature->irq_ctx[i].irq;
+
+ ddev->num_irqs = feature->nr_irqs;
+ }
+
+ ret = device_add(&ddev->dev);
+ if (ret)
+ goto put_dev;
+
+ dev_info(&pdev->dev, "add dfl_dev: %s\n", dev_name(&ddev->dev));
+ return ddev;
+
+put_dev:
+ /* calls release_dfl_dev() which does the clean up */
+ put_device(&ddev->dev);
+ return ERR_PTR(ret);
+}
+
+static void dfl_devs_uinit(struct dfl_feature_platform_data *pdata)
+{
+ struct dfl_device *ddev;
+ struct dfl_feature *feature;
+
+ dfl_fpga_dev_for_each_feature(pdata, feature) {
+ if (!feature->ioaddr && feature->priv) {
+ ddev = feature->priv;
+ device_unregister(&ddev->dev);
+ feature->priv = NULL;
+ }
+ }
+}
+
+static int dfl_devs_init(struct platform_device *pdev)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct dfl_feature *feature;
+ struct dfl_device *ddev;
+
+ dfl_fpga_dev_for_each_feature(pdata, feature) {
+ if (feature->ioaddr || feature->priv)
+ continue;
+
+ ddev = dfl_dev_add(pdata, feature);
+ if (IS_ERR(ddev)) {
+ dfl_devs_uinit(pdata);
+ return PTR_ERR(ddev);
+ }
+
+ feature->priv = ddev;
+ }
+
+ return 0;
+}
+
+int __dfl_driver_register(struct dfl_driver *dfl_drv, struct module *owner)
+{
+ if (!dfl_drv || !dfl_drv->probe || !dfl_drv->id_table)
+ return -EINVAL;
+
+ dfl_drv->drv.owner = owner;
+ dfl_drv->drv.bus = &dfl_bus_type;
+
+ return driver_register(&dfl_drv->drv);
+}
+EXPORT_SYMBOL(__dfl_driver_register);
+
+void dfl_driver_unregister(struct dfl_driver *dfl_drv)
+{
+ driver_unregister(&dfl_drv->drv);
+}
+EXPORT_SYMBOL(dfl_driver_unregister);
+
#define is_header_feature(feature) ((feature)->id == FEATURE_ID_FIU_HEADER)
/**
@@ -261,12 +485,15 @@ void dfl_fpga_dev_feature_uinit(struct platform_device *pdev)
struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct dfl_feature *feature;
- dfl_fpga_dev_for_each_feature(pdata, feature)
+ dfl_devs_uinit(pdata);
+
+ dfl_fpga_dev_for_each_feature(pdata, feature) {
if (feature->ops) {
if (feature->ops->uinit)
feature->ops->uinit(pdev, feature);
feature->ops = NULL;
}
+ }
}
EXPORT_SYMBOL_GPL(dfl_fpga_dev_feature_uinit);
@@ -347,6 +574,10 @@ int dfl_fpga_dev_feature_init(struct platform_device *pdev,
drv++;
}
+ ret = dfl_devs_init(pdev);
+ if (ret)
+ goto exit;
+
return 0;
exit:
dfl_fpga_dev_feature_uinit(pdev);
@@ -1284,11 +1515,17 @@ static int __init dfl_fpga_init(void)
{
int ret;
+ ret = bus_register(&dfl_bus_type);
+ if (ret)
+ return ret;
+
dfl_ids_init();
ret = dfl_chardev_init();
- if (ret)
+ if (ret) {
dfl_ids_destroy();
+ bus_unregister(&dfl_bus_type);
+ }
return ret;
}
@@ -1626,6 +1863,7 @@ static void __exit dfl_fpga_exit(void)
{
dfl_chardev_uinit();
dfl_ids_destroy();
+ bus_unregister(&dfl_bus_type);
}
module_init(dfl_fpga_init);
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index 5973769..667e1c9 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -514,4 +514,88 @@ long dfl_feature_ioctl_set_irq(struct platform_device *pdev,
struct dfl_feature *feature,
unsigned long arg);
+/**
+ * enum dfl_id_type - define the DFL FIU types
+ */
+enum dfl_id_type {
+ FME_ID,
+ PORT_ID,
+ DFL_ID_MAX,
+};
+
+/**
+ * struct dfl_device_id - dfl device identifier
+ * @type: Type of DFL FIU of the device. See enum dfl_id_type.
+ * @feature_id: 16 bits feature identifier local to its DFL FIU type.
+ * @driver_data: Driver specific data
+ */
+struct dfl_device_id {
+ unsigned int type;
+ u16 feature_id;
+ unsigned long driver_data;
+};
+
+/**
+ * struct dfl_device - represent an dfl device on dfl bus
+ *
+ * @dev: Generic device interface.
+ * @id: id of the dfl device
+ * @type: Type of DFL FIU of the device. See enum dfl_id_type.
+ * @feature_id: 16 bits feature identifier local to its DFL FIU type.
+ * @mmio_res: MMIO resource of this dfl device.
+ * @irqs: List of Linux IRQ numbers of this dfl device.
+ * @num_irqs: number of IRQs supported by this dfl device.
+ * @cdev: pointer to DFL FPGA container device this dfl device belongs to.
+ * @id_entry: matched id entry in dfl driver's id table.
+ */
+struct dfl_device {
+ struct device dev;
+ int id;
+ unsigned int type;
+ u16 feature_id;
+ struct resource mmio_res;
+ int *irqs;
+ unsigned int num_irqs;
+ struct dfl_fpga_cdev *cdev;
+ const struct dfl_device_id *id_entry;
+};
+
+/**
+ * struct dfl_driver - represent an dfl device driver
+ *
+ * @drv: Driver model structure.
+ * @id_table: Pointer to table of device IDs the driver is interested in.
+ * { } member terminated.
+ * @probe: Callback for device binding.
+ * @remove: Callback for device unbinding.
+ */
+struct dfl_driver {
+ struct device_driver drv;
+ const struct dfl_device_id *id_table;
+
+ int (*probe)(struct dfl_device *dfl_dev);
+ void (*remove)(struct dfl_device *dfl_dev);
+};
+
+#define to_dfl_dev(d) container_of(d, struct dfl_device, dev)
+#define to_dfl_drv(d) container_of(d, struct dfl_driver, drv)
+
+/*
+ * use a macro to avoid include chaining to get THIS_MODULE
+ */
+#define dfl_driver_register(drv) \
+ __dfl_driver_register(drv, THIS_MODULE)
+int __dfl_driver_register(struct dfl_driver *dfl_drv, struct module *owner);
+void dfl_driver_unregister(struct dfl_driver *dfl_drv);
+
+/*
+ * module_dfl_driver() - Helper macro for drivers that don't do
+ * anything special in module init/exit. This eliminates a lot of
+ * boilerplate. Each module may only use this macro once, and
+ * calling it replaces module_init() and module_exit()
+ */
+#define module_dfl_driver(__dfl_driver) \
+ module_driver(__dfl_driver, dfl_driver_register, \
+ dfl_driver_unregister)
+
#endif /* __FPGA_DFL_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* RE: [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices
2020-08-04 7:05 ` [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices Xu Yilun
@ 2020-08-05 10:29 ` Wu, Hao
2020-08-06 6:02 ` Xu Yilun
0 siblings, 1 reply; 18+ messages in thread
From: Wu, Hao @ 2020-08-05 10:29 UTC (permalink / raw)
To: Xu, Yilun, mdf, linux-fpga, linux-kernel
Cc: trix, lgoncalv, Matthew Gerlach, Weight, Russell H
> Subject: [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices
>
> A new bus type "dfl" is introduced for private features which are not
> initialized by DFL feature drivers (dfl-fme & dfl-afu drivers). So these
> private features could be handled by separate driver modules.
>
> DFL feature drivers (dfl-fme, dfl-port) will create DFL devices on
> enumeration. DFL drivers could be registered on this bus to match these
> DFL devices. They are matched by dfl type & feature_id.
>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> Signed-off-by: Wu Hao <hao.wu@intel.com>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> Reviewed-by: Tom Rix <trix@redhat.com>
> ---
> v2: change the bus uevent format.
> change the dfl device's sysfs name format.
> refactor dfl_dev_add().
> minor fixes for comments from Hao and Tom.
> v3: no change.
> ---
> Documentation/ABI/testing/sysfs-bus-dfl | 15 ++
> drivers/fpga/dfl.c | 254 +++++++++++++++++++++++++++++++-
> drivers/fpga/dfl.h | 84 +++++++++++
> 3 files changed, 345 insertions(+), 8 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-dfl
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-dfl
> b/Documentation/ABI/testing/sysfs-bus-dfl
> new file mode 100644
> index 0000000..b1eea30
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-dfl
> @@ -0,0 +1,15 @@
> +What: /sys/bus/dfl/devices/.../type
So it will be clear, that it's always dfl_dev.X/type here?
> +Date: July 2020
> +KernelVersion: 5.9
Same as the other patches.
> +Contact: Xu Yilun <yilun.xu@intel.com>
> +Description: Read-only. It returns type of DFL FIU of the device. Now DFL
> + supports 2 FIU types, 0 for FME, 1 for PORT.
> + Format: 0x%x
> +
> +What: /sys/bus/dfl/devices/.../feature_id
Same?
> +Date: July 2020
> +KernelVersion: 5.9
Ditto
> +Contact: Xu Yilun <yilun.xu@intel.com>
> +Description: Read-only. It returns feature identifier local to its DFL FIU
> + type.
> + Format: 0x%x
> diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
> index c649239..978d182 100644
> --- a/drivers/fpga/dfl.c
> +++ b/drivers/fpga/dfl.c
> @@ -30,12 +30,6 @@ static DEFINE_MUTEX(dfl_id_mutex);
> * index to dfl_chardevs table. If no chardev support just set devt_type
> * as one invalid index (DFL_FPGA_DEVT_MAX).
> */
> -enum dfl_id_type {
> - FME_ID, /* fme id allocation and mapping */
> - PORT_ID, /* port id allocation and mapping */
> - DFL_ID_MAX,
> -};
> -
> enum dfl_fpga_devt_type {
> DFL_FPGA_DEVT_FME,
> DFL_FPGA_DEVT_PORT,
> @@ -250,6 +244,236 @@ int dfl_fpga_check_port_id(struct platform_device
> *pdev, void *pport_id)
> }
> EXPORT_SYMBOL_GPL(dfl_fpga_check_port_id);
>
> +static DEFINE_IDA(dfl_device_ida);
> +
> +static const struct dfl_device_id *
> +dfl_match_one_device(const struct dfl_device_id *id, struct dfl_device
> *ddev)
> +{
> + if (id->type == ddev->type && id->feature_id == ddev->feature_id)
> + return id;
> +
> + return NULL;
> +}
> +
> +static int dfl_bus_match(struct device *dev, struct device_driver *drv)
> +{
> + struct dfl_device *ddev = to_dfl_dev(dev);
> + struct dfl_driver *ddrv = to_dfl_drv(drv);
> + const struct dfl_device_id *id_entry = ddrv->id_table;
> +
> + if (id_entry) {
> + while (id_entry->feature_id) {
> + if (dfl_match_one_device(id_entry, ddev)) {
> + ddev->id_entry = id_entry;
> + return 1;
> + }
> + id_entry++;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int dfl_bus_probe(struct device *dev)
> +{
> + struct dfl_device *ddev = to_dfl_dev(dev);
> + struct dfl_driver *ddrv = to_dfl_drv(dev->driver);
> +
> + return ddrv->probe(ddev);
> +}
> +
> +static int dfl_bus_remove(struct device *dev)
> +{
> + struct dfl_device *ddev = to_dfl_dev(dev);
> + struct dfl_driver *ddrv = to_dfl_drv(dev->driver);
> +
> + if (ddrv->remove)
> + ddrv->remove(ddev);
> +
> + return 0;
> +}
> +
> +static int dfl_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
> +{
> + struct dfl_device *ddev = to_dfl_dev(dev);
> +
> + return add_uevent_var(env, "MODALIAS=dfl:t%08Xf%04X",
> + ddev->type, ddev->feature_id);
Then we only print 12bit of feature_id will be enough?
should we make type shorter as well as feature id?
And do you think if we should add a new field for dfl version?
> +}
> +
> +/* show dfl info fields */
> +#define dfl_info_attr(field, format_string) \
> +static ssize_t \
> +field##_show(struct device *dev, struct device_attribute *attr,
> \
> + char *buf) \
> +{ \
> + struct dfl_device *ddev = to_dfl_dev(dev); \
> + \
> + return sprintf(buf, format_string, ddev->field); \
> +} \
> +static DEVICE_ATTR_RO(field)
> +
> +dfl_info_attr(type, "0x%x\n");
> +dfl_info_attr(feature_id, "0x%x\n");
> +
> +static struct attribute *dfl_dev_attrs[] = {
> + &dev_attr_type.attr,
> + &dev_attr_feature_id.attr,
> + NULL,
> +};
> +
> +ATTRIBUTE_GROUPS(dfl_dev);
> +
> +static struct bus_type dfl_bus_type = {
> + .name = "dfl",
> + .match = dfl_bus_match,
> + .probe = dfl_bus_probe,
> + .remove = dfl_bus_remove,
> + .uevent = dfl_bus_uevent,
> + .dev_groups = dfl_dev_groups,
> +};
> +
> +static void release_dfl_dev(struct device *dev)
> +{
> + struct dfl_device *ddev = to_dfl_dev(dev);
> +
> + if (ddev->mmio_res.parent)
> + release_resource(&ddev->mmio_res);
> +
> + ida_simple_remove(&dfl_device_ida, ddev->id);
> + kfree(ddev->irqs);
> + kfree(ddev);
> +}
> +
> +static struct dfl_device *
> +dfl_dev_add(struct dfl_feature_platform_data *pdata,
> + struct dfl_feature *feature)
> +{
> + struct platform_device *pdev = pdata->dev;
> + struct resource *parent_res;
> + struct dfl_device *ddev;
> + int id, i, ret;
> +
> + ddev = kzalloc(sizeof(*ddev), GFP_KERNEL);
If we only consider add dfl device during initialization of
FME/PORT device, then it should be able to use devm_xx version?
> + if (!ddev)
> + return ERR_PTR(-ENOMEM);
> +
> + id = ida_simple_get(&dfl_device_ida, 0, 0, GFP_KERNEL);
> + if (id < 0) {
> + dev_err(&pdev->dev, "unable to get id\n");
> + kfree(ddev);
> + return ERR_PTR(id);
> + }
> +
> + /* freeing resources by put_device() after device_initialize() */
> + device_initialize(&ddev->dev);
> + ddev->dev.parent = &pdev->dev;
> + ddev->dev.bus = &dfl_bus_type;
> + ddev->dev.release = release_dfl_dev;
> + ddev->id = id;
> + ret = dev_set_name(&ddev->dev, "dfl_dev.%d", id);
> + if (ret)
> + goto put_dev;
> +
> + ddev->type = feature_dev_id_type(pdev);
> + ddev->feature_id = feature->id;
> + ddev->cdev = pdata->dfl_cdev;
> +
> + /* add mmio resource */
> + parent_res = &pdev->resource[feature->resource_index];
> + ddev->mmio_res.flags = IORESOURCE_MEM;
> + ddev->mmio_res.start = parent_res->start;
> + ddev->mmio_res.end = parent_res->end;
> + ddev->mmio_res.name = dev_name(&ddev->dev);
> + ret = insert_resource(parent_res, &ddev->mmio_res);
> + if (ret) {
> + dev_err(&pdev->dev, "%s failed to claim resource: %pR\n",
> + dev_name(&ddev->dev), &ddev->mmio_res);
> + goto put_dev;
> + }
> +
> + /* then add irq resource */
> + if (feature->nr_irqs) {
> + ddev->irqs = kcalloc(feature->nr_irqs,
> + sizeof(*ddev->irqs), GFP_KERNEL);
> + if (!ddev->irqs) {
> + ret = -ENOMEM;
> + goto put_dev;
> + }
> +
> + for (i = 0; i < feature->nr_irqs; i++)
> + ddev->irqs[i] = feature->irq_ctx[i].irq;
> +
> + ddev->num_irqs = feature->nr_irqs;
Do we need to consider using IORESOURCE_IRQ here as well?
> + }
> +
> + ret = device_add(&ddev->dev);
> + if (ret)
> + goto put_dev;
> +
> + dev_info(&pdev->dev, "add dfl_dev: %s\n", dev_name(&ddev->dev));
> + return ddev;
> +
> +put_dev:
> + /* calls release_dfl_dev() which does the clean up */
> + put_device(&ddev->dev);
> + return ERR_PTR(ret);
> +}
> +
> +static void dfl_devs_uinit(struct dfl_feature_platform_data *pdata)
> +{
> + struct dfl_device *ddev;
> + struct dfl_feature *feature;
> +
> + dfl_fpga_dev_for_each_feature(pdata, feature) {
> + if (!feature->ioaddr && feature->priv) {
Maybe we can add a new filed for ddev, then it will simplify
the checking. How do you think?
> + ddev = feature->priv;
> + device_unregister(&ddev->dev);
> + feature->priv = NULL;
> + }
> + }
> +}
> +
> +static int dfl_devs_init(struct platform_device *pdev)
> +{
> + struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev-
> >dev);
> + struct dfl_feature *feature;
> + struct dfl_device *ddev;
> +
> + dfl_fpga_dev_for_each_feature(pdata, feature) {
> + if (feature->ioaddr || feature->priv)
Why checks priv here?
> + continue;
> +
> + ddev = dfl_dev_add(pdata, feature);
> + if (IS_ERR(ddev)) {
> + dfl_devs_uinit(pdata);
> + return PTR_ERR(ddev);
> + }
> +
> + feature->priv = ddev;
> + }
> +
> + return 0;
> +}
> +
> +int __dfl_driver_register(struct dfl_driver *dfl_drv, struct module *owner)
> +{
> + if (!dfl_drv || !dfl_drv->probe || !dfl_drv->id_table)
> + return -EINVAL;
> +
> + dfl_drv->drv.owner = owner;
> + dfl_drv->drv.bus = &dfl_bus_type;
> +
> + return driver_register(&dfl_drv->drv);
> +}
> +EXPORT_SYMBOL(__dfl_driver_register);
> +
> +void dfl_driver_unregister(struct dfl_driver *dfl_drv)
> +{
> + driver_unregister(&dfl_drv->drv);
> +}
> +EXPORT_SYMBOL(dfl_driver_unregister);
> +
> #define is_header_feature(feature) ((feature)->id ==
> FEATURE_ID_FIU_HEADER)
>
> /**
> @@ -261,12 +485,15 @@ void dfl_fpga_dev_feature_uinit(struct
> platform_device *pdev)
> struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev-
> >dev);
> struct dfl_feature *feature;
>
> - dfl_fpga_dev_for_each_feature(pdata, feature)
> + dfl_devs_uinit(pdata);
Then you loop each feature twice, but they can be done in one loop ideally?
> +
> + dfl_fpga_dev_for_each_feature(pdata, feature) {
> if (feature->ops) {
> if (feature->ops->uinit)
> feature->ops->uinit(pdev, feature);
> feature->ops = NULL;
> }
> + }
> }
> EXPORT_SYMBOL_GPL(dfl_fpga_dev_feature_uinit);
>
> @@ -347,6 +574,10 @@ int dfl_fpga_dev_feature_init(struct
> platform_device *pdev,
> drv++;
> }
>
> + ret = dfl_devs_init(pdev);
> + if (ret)
> + goto exit;
> +
> return 0;
> exit:
> dfl_fpga_dev_feature_uinit(pdev);
> @@ -1284,11 +1515,17 @@ static int __init dfl_fpga_init(void)
> {
> int ret;
>
> + ret = bus_register(&dfl_bus_type);
> + if (ret)
> + return ret;
> +
> dfl_ids_init();
>
> ret = dfl_chardev_init();
> - if (ret)
> + if (ret) {
> dfl_ids_destroy();
> + bus_unregister(&dfl_bus_type);
> + }
>
> return ret;
> }
> @@ -1626,6 +1863,7 @@ static void __exit dfl_fpga_exit(void)
> {
> dfl_chardev_uinit();
> dfl_ids_destroy();
> + bus_unregister(&dfl_bus_type);
> }
>
> module_init(dfl_fpga_init);
> diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
> index 5973769..667e1c9 100644
> --- a/drivers/fpga/dfl.h
> +++ b/drivers/fpga/dfl.h
> @@ -514,4 +514,88 @@ long dfl_feature_ioctl_set_irq(struct
> platform_device *pdev,
> struct dfl_feature *feature,
> unsigned long arg);
>
> +/**
> + * enum dfl_id_type - define the DFL FIU types
> + */
> +enum dfl_id_type {
> + FME_ID,
> + PORT_ID,
> + DFL_ID_MAX,
> +};
> +
> +/**
> + * struct dfl_device_id - dfl device identifier
> + * @type: Type of DFL FIU of the device. See enum dfl_id_type.
> + * @feature_id: 16 bits feature identifier local to its DFL FIU type.
Actually 12bits are used.
> + * @driver_data: Driver specific data
> + */
> +struct dfl_device_id {
> + unsigned int type;
> + u16 feature_id;
> + unsigned long driver_data;
> +};
> +
> +/**
> + * struct dfl_device - represent an dfl device on dfl bus
> + *
> + * @dev: Generic device interface.
> + * @id: id of the dfl device
> + * @type: Type of DFL FIU of the device. See enum dfl_id_type.
> + * @feature_id: 16 bits feature identifier local to its DFL FIU type.
> + * @mmio_res: MMIO resource of this dfl device.
> + * @irqs: List of Linux IRQ numbers of this dfl device.
> + * @num_irqs: number of IRQs supported by this dfl device.
> + * @cdev: pointer to DFL FPGA container device this dfl device belongs to.
> + * @id_entry: matched id entry in dfl driver's id table.
> + */
> +struct dfl_device {
> + struct device dev;
> + int id;
> + unsigned int type;
> + u16 feature_id;
> + struct resource mmio_res;
> + int *irqs;
> + unsigned int num_irqs;
> + struct dfl_fpga_cdev *cdev;
> + const struct dfl_device_id *id_entry;
> +};
> +
> +/**
> + * struct dfl_driver - represent an dfl device driver
> + *
> + * @drv: Driver model structure.
> + * @id_table: Pointer to table of device IDs the driver is interested in.
> + * { } member terminated.
> + * @probe: Callback for device binding.
Please add "Mandatory callback" in the description.
Thanks
Hao
> + * @remove: Callback for device unbinding.
> + */
> +struct dfl_driver {
> + struct device_driver drv;
> + const struct dfl_device_id *id_table;
> +
> + int (*probe)(struct dfl_device *dfl_dev);
> + void (*remove)(struct dfl_device *dfl_dev);
> +};
> +
> +#define to_dfl_dev(d) container_of(d, struct dfl_device, dev)
> +#define to_dfl_drv(d) container_of(d, struct dfl_driver, drv)
> +
> +/*
> + * use a macro to avoid include chaining to get THIS_MODULE
> + */
> +#define dfl_driver_register(drv) \
> + __dfl_driver_register(drv, THIS_MODULE)
> +int __dfl_driver_register(struct dfl_driver *dfl_drv, struct module *owner);
> +void dfl_driver_unregister(struct dfl_driver *dfl_drv);
> +
> +/*
> + * module_dfl_driver() - Helper macro for drivers that don't do
> + * anything special in module init/exit. This eliminates a lot of
> + * boilerplate. Each module may only use this macro once, and
> + * calling it replaces module_init() and module_exit()
> + */
> +#define module_dfl_driver(__dfl_driver) \
> + module_driver(__dfl_driver, dfl_driver_register, \
> + dfl_driver_unregister)
> +
> #endif /* __FPGA_DFL_H */
> --
> 2.7.4
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices
2020-08-05 10:29 ` Wu, Hao
@ 2020-08-06 6:02 ` Xu Yilun
2020-08-06 7:11 ` Wu, Hao
0 siblings, 1 reply; 18+ messages in thread
From: Xu Yilun @ 2020-08-06 6:02 UTC (permalink / raw)
To: Wu, Hao
Cc: mdf, linux-fpga, linux-kernel, trix, lgoncalv, Matthew Gerlach,
Weight, Russell H
On Wed, Aug 05, 2020 at 06:29:11PM +0800, Wu, Hao wrote:
> > Subject: [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices
> >
> > A new bus type "dfl" is introduced for private features which are not
> > initialized by DFL feature drivers (dfl-fme & dfl-afu drivers). So these
> > private features could be handled by separate driver modules.
> >
> > DFL feature drivers (dfl-fme, dfl-port) will create DFL devices on
> > enumeration. DFL drivers could be registered on this bus to match these
> > DFL devices. They are matched by dfl type & feature_id.
> >
> > Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> > Signed-off-by: Wu Hao <hao.wu@intel.com>
> > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> > Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> > Reviewed-by: Tom Rix <trix@redhat.com>
> > ---
> > v2: change the bus uevent format.
> > change the dfl device's sysfs name format.
> > refactor dfl_dev_add().
> > minor fixes for comments from Hao and Tom.
> > v3: no change.
> > ---
> > Documentation/ABI/testing/sysfs-bus-dfl | 15 ++
> > drivers/fpga/dfl.c | 254 +++++++++++++++++++++++++++++++-
> > drivers/fpga/dfl.h | 84 +++++++++++
> > 3 files changed, 345 insertions(+), 8 deletions(-)
> > create mode 100644 Documentation/ABI/testing/sysfs-bus-dfl
> >
> > diff --git a/Documentation/ABI/testing/sysfs-bus-dfl
> > b/Documentation/ABI/testing/sysfs-bus-dfl
> > new file mode 100644
> > index 0000000..b1eea30
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-bus-dfl
> > @@ -0,0 +1,15 @@
> > +What:/sys/bus/dfl/devices/.../type
>
> So it will be clear, that it's always dfl_dev.X/type here?
>
> > +Date:July 2020
> > +KernelVersion:5.9
>
> Same as the other patches.
>
> > +Contact:Xu Yilun <yilun.xu@intel.com>
> > +Description:Read-only. It returns type of DFL FIU of the device. Now DFL
> > +supports 2 FIU types, 0 for FME, 1 for PORT.
> > +Format: 0x%x
> > +
> > +What:/sys/bus/dfl/devices/.../feature_id
>
> Same?
>
> > +Date:July 2020
> > +KernelVersion:5.9
>
> Ditto
>
> > +Contact:Xu Yilun <yilun.xu@intel.com>
> > +Description:Read-only. It returns feature identifier local to its DFL FIU
> > +type.
> > +Format: 0x%x
> > diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
> > index c649239..978d182 100644
> > --- a/drivers/fpga/dfl.c
> > +++ b/drivers/fpga/dfl.c
> > @@ -30,12 +30,6 @@ static DEFINE_MUTEX(dfl_id_mutex);
> > * index to dfl_chardevs table. If no chardev support just set devt_type
> > * as one invalid index (DFL_FPGA_DEVT_MAX).
> > */
> > -enum dfl_id_type {
> > -FME_ID,/* fme id allocation and mapping */
> > -PORT_ID,/* port id allocation and mapping */
> > -DFL_ID_MAX,
> > -};
> > -
> > enum dfl_fpga_devt_type {
> > DFL_FPGA_DEVT_FME,
> > DFL_FPGA_DEVT_PORT,
> > @@ -250,6 +244,236 @@ int dfl_fpga_check_port_id(struct platform_device
> > *pdev, void *pport_id)
> > }
> > EXPORT_SYMBOL_GPL(dfl_fpga_check_port_id);
> >
> > +static DEFINE_IDA(dfl_device_ida);
> > +
> > +static const struct dfl_device_id *
> > +dfl_match_one_device(const struct dfl_device_id *id, struct dfl_device
> > *ddev)
> > +{
> > +if (id->type == ddev->type && id->feature_id == ddev->feature_id)
> > +return id;
> > +
> > +return NULL;
> > +}
> > +
> > +static int dfl_bus_match(struct device *dev, struct device_driver *drv)
> > +{
> > +struct dfl_device *ddev = to_dfl_dev(dev);
> > +struct dfl_driver *ddrv = to_dfl_drv(drv);
> > +const struct dfl_device_id *id_entry = ddrv->id_table;
> > +
> > +if (id_entry) {
> > +while (id_entry->feature_id) {
> > +if (dfl_match_one_device(id_entry, ddev)) {
> > +ddev->id_entry = id_entry;
> > +return 1;
> > +}
> > +id_entry++;
> > +}
> > +}
> > +
> > +return 0;
> > +}
> > +
> > +static int dfl_bus_probe(struct device *dev)
> > +{
> > +struct dfl_device *ddev = to_dfl_dev(dev);
> > +struct dfl_driver *ddrv = to_dfl_drv(dev->driver);
> > +
> > +return ddrv->probe(ddev);
> > +}
> > +
> > +static int dfl_bus_remove(struct device *dev)
> > +{
> > +struct dfl_device *ddev = to_dfl_dev(dev);
> > +struct dfl_driver *ddrv = to_dfl_drv(dev->driver);
> > +
> > +if (ddrv->remove)
> > +ddrv->remove(ddev);
> > +
> > +return 0;
> > +}
> > +
> > +static int dfl_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
> > +{
> > +struct dfl_device *ddev = to_dfl_dev(dev);
> > +
> > +return add_uevent_var(env, "MODALIAS=dfl:t%08Xf%04X",
> > + ddev->type, ddev->feature_id);
>
> Then we only print 12bit of feature_id will be enough?
> should we make type shorter as well as feature id?
I could envision that we need a struct
struct dfl_feature_id {
u16 id: 12;
}
for it.
But it seems more complex and I didn't see the benifit. We don't have to
worry about the invalid values cause we parse all the ddev->feature_id in
dfl driver, and ensures it will not be larger than 12bit value.
> And do you think if we should add a new field for dfl version?
I think it may not be necessary now. If we support dfl v1 in future, we
still could try to check uuid first, then fall back to type &
feature_id.
Do you have any idea for the potential usage of dfl version.
>
> > +}
> > +
> > +/* show dfl info fields */
> > +#define dfl_info_attr(field, format_string)\
> > +static ssize_t\
> > +field##_show(struct device *dev, struct device_attribute *attr,
> > \
> > + char *buf)\
> > +{\
> > +struct dfl_device *ddev = to_dfl_dev(dev);\
> > +\
> > +return sprintf(buf, format_string, ddev->field);\
> > +}\
> > +static DEVICE_ATTR_RO(field)
> > +
> > +dfl_info_attr(type, "0x%x\n");
> > +dfl_info_attr(feature_id, "0x%x\n");
> > +
> > +static struct attribute *dfl_dev_attrs[] = {
> > +&dev_attr_type.attr,
> > +&dev_attr_feature_id.attr,
> > +NULL,
> > +};
> > +
> > +ATTRIBUTE_GROUPS(dfl_dev);
> > +
> > +static struct bus_type dfl_bus_type = {
> > +.name= "dfl",
> > +.match= dfl_bus_match,
> > +.probe= dfl_bus_probe,
> > +.remove= dfl_bus_remove,
> > +.uevent= dfl_bus_uevent,
> > +.dev_groups= dfl_dev_groups,
> > +};
> > +
> > +static void release_dfl_dev(struct device *dev)
> > +{
> > +struct dfl_device *ddev = to_dfl_dev(dev);
> > +
> > +if (ddev->mmio_res.parent)
> > +release_resource(&ddev->mmio_res);
> > +
> > +ida_simple_remove(&dfl_device_ida, ddev->id);
> > +kfree(ddev->irqs);
> > +kfree(ddev);
> > +}
> > +
> > +static struct dfl_device *
> > +dfl_dev_add(struct dfl_feature_platform_data *pdata,
> > + struct dfl_feature *feature)
> > +{
> > +struct platform_device *pdev = pdata->dev;
> > +struct resource *parent_res;
> > +struct dfl_device *ddev;
> > +int id, i, ret;
> > +
> > +ddev = kzalloc(sizeof(*ddev), GFP_KERNEL);
>
> If we only consider add dfl device during initialization of
> FME/PORT device, then it should be able to use devm_xx version?
I think we may keep the flexibility that the fme/port device could try to
remove a dfl_device without exiting itself.
>
> > +if (!ddev)
> > +return ERR_PTR(-ENOMEM);
> > +
> > +id = ida_simple_get(&dfl_device_ida, 0, 0, GFP_KERNEL);
> > +if (id < 0) {
> > +dev_err(&pdev->dev, "unable to get id\n");
> > +kfree(ddev);
> > +return ERR_PTR(id);
> > +}
> > +
> > +/* freeing resources by put_device() after device_initialize() */
> > +device_initialize(&ddev->dev);
> > +ddev->dev.parent = &pdev->dev;
> > +ddev->dev.bus = &dfl_bus_type;
> > +ddev->dev.release = release_dfl_dev;
> > +ddev->id = id;
> > +ret = dev_set_name(&ddev->dev, "dfl_dev.%d", id);
> > +if (ret)
> > +goto put_dev;
> > +
> > +ddev->type = feature_dev_id_type(pdev);
> > +ddev->feature_id = feature->id;
> > +ddev->cdev = pdata->dfl_cdev;
> > +
> > +/* add mmio resource */
> > +parent_res = &pdev->resource[feature->resource_index];
> > +ddev->mmio_res.flags = IORESOURCE_MEM;
> > +ddev->mmio_res.start = parent_res->start;
> > +ddev->mmio_res.end = parent_res->end;
> > +ddev->mmio_res.name = dev_name(&ddev->dev);
> > +ret = insert_resource(parent_res, &ddev->mmio_res);
> > +if (ret) {
> > +dev_err(&pdev->dev, "%s failed to claim resource: %pR\n",
> > +dev_name(&ddev->dev), &ddev->mmio_res);
> > +goto put_dev;
> > +}
> > +
> > +/* then add irq resource */
> > +if (feature->nr_irqs) {
> > +ddev->irqs = kcalloc(feature->nr_irqs,
> > + sizeof(*ddev->irqs), GFP_KERNEL);
> > +if (!ddev->irqs) {
> > +ret = -ENOMEM;
> > +goto put_dev;
> > +}
> > +
> > +for (i = 0; i < feature->nr_irqs; i++)
> > +ddev->irqs[i] = feature->irq_ctx[i].irq;
> > +
> > +ddev->num_irqs = feature->nr_irqs;
>
> Do we need to consider using IORESOURCE_IRQ here as well?
The helper functions for IORESOURCE_IRQ are all for platform_devices,
We need to define a set of functions similar to them, I think current
implementation is simpler, for dfl bus and drivers.
>
> > +}
> > +
> > +ret = device_add(&ddev->dev);
> > +if (ret)
> > +goto put_dev;
> > +
> > +dev_info(&pdev->dev, "add dfl_dev: %s\n", dev_name(&ddev->dev));
> > +return ddev;
> > +
> > +put_dev:
> > +/* calls release_dfl_dev() which does the clean up */
> > +put_device(&ddev->dev);
> > +return ERR_PTR(ret);
> > +}
> > +
> > +static void dfl_devs_uinit(struct dfl_feature_platform_data *pdata)
> > +{
> > +struct dfl_device *ddev;
> > +struct dfl_feature *feature;
> > +
> > +dfl_fpga_dev_for_each_feature(pdata, feature) {
> > +if (!feature->ioaddr && feature->priv) {
>
> Maybe we can add a new filed for ddev, then it will simplify
> the checking. How do you think?
I think yes. I could do that.
>
> > +ddev = feature->priv;
> > +device_unregister(&ddev->dev);
> > +feature->priv = NULL;
> > +}
> > +}
> > +}
> > +
> > +static int dfl_devs_init(struct platform_device *pdev)
> > +{
> > +struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev-
> > >dev);
> > +struct dfl_feature *feature;
> > +struct dfl_device *ddev;
> > +
> > +dfl_fpga_dev_for_each_feature(pdata, feature) {
> > +if (feature->ioaddr || feature->priv)
>
> Why checks priv here?
I want to make sure the dfl_device is not already created.
>
> > +continue;
> > +
> > +ddev = dfl_dev_add(pdata, feature);
> > +if (IS_ERR(ddev)) {
> > +dfl_devs_uinit(pdata);
> > +return PTR_ERR(ddev);
> > +}
> > +
> > +feature->priv = ddev;
> > +}
> > +
> > +return 0;
> > +}
> > +
> > +int __dfl_driver_register(struct dfl_driver *dfl_drv, struct module *owner)
> > +{
> > +if (!dfl_drv || !dfl_drv->probe || !dfl_drv->id_table)
> > +return -EINVAL;
> > +
> > +dfl_drv->drv.owner = owner;
> > +dfl_drv->drv.bus = &dfl_bus_type;
> > +
> > +return driver_register(&dfl_drv->drv);
> > +}
> > +EXPORT_SYMBOL(__dfl_driver_register);
> > +
> > +void dfl_driver_unregister(struct dfl_driver *dfl_drv)
> > +{
> > +driver_unregister(&dfl_drv->drv);
> > +}
> > +EXPORT_SYMBOL(dfl_driver_unregister);
> > +
> > #define is_header_feature(feature) ((feature)->id ==
> > FEATURE_ID_FIU_HEADER)
> >
> > /**
> > @@ -261,12 +485,15 @@ void dfl_fpga_dev_feature_uinit(struct
> > platform_device *pdev)
> > struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev-
> > >dev);
> > struct dfl_feature *feature;
> >
> > -dfl_fpga_dev_for_each_feature(pdata, feature)
> > +dfl_devs_uinit(pdata);
>
> Then you loop each feature twice, but they can be done in one loop ideally?
Yes. But I'd like to remove the dfl_devices first, then the fme/port
owned features. Cause the fme/port is the parent, I don't want them to
be partially disfunctional before the children are removed.
>
> > +
> > +dfl_fpga_dev_for_each_feature(pdata, feature) {
> > if (feature->ops) {
> > if (feature->ops->uinit)
> > feature->ops->uinit(pdev, feature);
> > feature->ops = NULL;
> > }
> > +}
> > }
> > EXPORT_SYMBOL_GPL(dfl_fpga_dev_feature_uinit);
> >
> > @@ -347,6 +574,10 @@ int dfl_fpga_dev_feature_init(struct
> > platform_device *pdev,
> > drv++;
> > }
> >
> > +ret = dfl_devs_init(pdev);
> > +if (ret)
> > +goto exit;
> > +
> > return 0;
> > exit:
> > dfl_fpga_dev_feature_uinit(pdev);
> > @@ -1284,11 +1515,17 @@ static int __init dfl_fpga_init(void)
> > {
> > int ret;
> >
> > +ret = bus_register(&dfl_bus_type);
> > +if (ret)
> > +return ret;
> > +
> > dfl_ids_init();
> >
> > ret = dfl_chardev_init();
> > -if (ret)
> > +if (ret) {
> > dfl_ids_destroy();
> > +bus_unregister(&dfl_bus_type);
> > +}
> >
> > return ret;
> > }
> > @@ -1626,6 +1863,7 @@ static void __exit dfl_fpga_exit(void)
> > {
> > dfl_chardev_uinit();
> > dfl_ids_destroy();
> > +bus_unregister(&dfl_bus_type);
> > }
> >
> > module_init(dfl_fpga_init);
> > diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
> > index 5973769..667e1c9 100644
> > --- a/drivers/fpga/dfl.h
> > +++ b/drivers/fpga/dfl.h
> > @@ -514,4 +514,88 @@ long dfl_feature_ioctl_set_irq(struct
> > platform_device *pdev,
> > struct dfl_feature *feature,
> > unsigned long arg);
> >
> > +/**
> > + * enum dfl_id_type - define the DFL FIU types
> > + */
> > +enum dfl_id_type {
> > +FME_ID,
> > +PORT_ID,
> > +DFL_ID_MAX,
> > +};
> > +
> > +/**
> > + * struct dfl_device_id - dfl device identifier
> > + * @type: Type of DFL FIU of the device. See enum dfl_id_type.
> > + * @feature_id: 16 bits feature identifier local to its DFL FIU type.
>
> Actually 12bits are used.
I could add the comments.
>
> > + * @driver_data: Driver specific data
> > + */
> > +struct dfl_device_id {
> > +unsigned int type;
> > +u16 feature_id;
> > +unsigned long driver_data;
> > +};
> > +
> > +/**
> > + * struct dfl_device - represent an dfl device on dfl bus
> > + *
> > + * @dev: Generic device interface.
> > + * @id: id of the dfl device
> > + * @type: Type of DFL FIU of the device. See enum dfl_id_type.
> > + * @feature_id: 16 bits feature identifier local to its DFL FIU type.
> > + * @mmio_res: MMIO resource of this dfl device.
> > + * @irqs: List of Linux IRQ numbers of this dfl device.
> > + * @num_irqs: number of IRQs supported by this dfl device.
> > + * @cdev: pointer to DFL FPGA container device this dfl device belongs to.
> > + * @id_entry: matched id entry in dfl driver's id table.
> > + */
> > +struct dfl_device {
> > +struct device dev;
> > +int id;
> > +unsigned int type;
> > +u16 feature_id;
> > +struct resource mmio_res;
> > +int *irqs;
> > +unsigned int num_irqs;
> > +struct dfl_fpga_cdev *cdev;
> > +const struct dfl_device_id *id_entry;
> > +};
> > +
> > +/**
> > + * struct dfl_driver - represent an dfl device driver
> > + *
> > + * @drv: Driver model structure.
> > + * @id_table: Pointer to table of device IDs the driver is interested in.
> > + * { } member terminated.
> > + * @probe: Callback for device binding.
>
> Please add "Mandatory callback" in the description.
Yes.
>
> Thanks
> Hao
>
> > + * @remove: Callback for device unbinding.
> > + */
> > +struct dfl_driver {
> > +struct device_driver drv;
> > +const struct dfl_device_id *id_table;
> > +
> > +int (*probe)(struct dfl_device *dfl_dev);
> > +void (*remove)(struct dfl_device *dfl_dev);
> > +};
> > +
> > +#define to_dfl_dev(d) container_of(d, struct dfl_device, dev)
> > +#define to_dfl_drv(d) container_of(d, struct dfl_driver, drv)
> > +
> > +/*
> > + * use a macro to avoid include chaining to get THIS_MODULE
> > + */
> > +#define dfl_driver_register(drv) \
> > +__dfl_driver_register(drv, THIS_MODULE)
> > +int __dfl_driver_register(struct dfl_driver *dfl_drv, struct module *owner);
> > +void dfl_driver_unregister(struct dfl_driver *dfl_drv);
> > +
> > +/*
> > + * module_dfl_driver() - Helper macro for drivers that don't do
> > + * anything special in module init/exit. This eliminates a lot of
> > + * boilerplate. Each module may only use this macro once, and
> > + * calling it replaces module_init() and module_exit()
> > + */
> > +#define module_dfl_driver(__dfl_driver) \
> > +module_driver(__dfl_driver, dfl_driver_register, \
> > + dfl_driver_unregister)
> > +
> > #endif /* __FPGA_DFL_H */
> > --
> > 2.7.4
^ permalink raw reply [flat|nested] 18+ messages in thread* RE: [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices
2020-08-06 6:02 ` Xu Yilun
@ 2020-08-06 7:11 ` Wu, Hao
2020-08-06 8:50 ` Xu Yilun
0 siblings, 1 reply; 18+ messages in thread
From: Wu, Hao @ 2020-08-06 7:11 UTC (permalink / raw)
To: Xu, Yilun
Cc: mdf, linux-fpga, linux-kernel, trix, lgoncalv, Matthew Gerlach,
Weight, Russell H
> > > +static int dfl_bus_uevent(struct device *dev, struct kobj_uevent_env
> *env)
> > > +{
> > > +struct dfl_device *ddev = to_dfl_dev(dev);
> > > +
> > > +return add_uevent_var(env, "MODALIAS=dfl:t%08Xf%04X",
> > > + ddev->type, ddev->feature_id);
> >
> > Then we only print 12bit of feature_id will be enough?
> > should we make type shorter as well as feature id?
>
> I could envision that we need a struct
>
> struct dfl_feature_id {
> u16 id: 12;
> }
>
> for it.
>
> But it seems more complex and I didn't see the benifit. We don't have to
> worry about the invalid values cause we parse all the ddev->feature_id in
> dfl driver, and ensures it will not be larger than 12bit value.
Ideally type is only 4bits per spec, but looks like it's adding more zero before
the type value, and also the feature id. This may not be a real problem, but
may look a little wired, isn't it?
>
> > And do you think if we should add a new field for dfl version?
>
> I think it may not be necessary now. If we support dfl v1 in future, we
> still could try to check uuid first, then fall back to type &
> feature_id.
I think it's all about the uevent and it's user, and for users, they may have to
deal with different versions, right? As you mentioned, if the event will be
different format for v1 and it's not compatible with v0, anyway we need
the version sooner or later, is my understanding correct?
>
> Do you have any idea for the potential usage of dfl version.
>
> > > +/* then add irq resource */
> > > +if (feature->nr_irqs) {
> > > +ddev->irqs = kcalloc(feature->nr_irqs,
> > > + sizeof(*ddev->irqs), GFP_KERNEL);
> > > +if (!ddev->irqs) {
> > > +ret = -ENOMEM;
> > > +goto put_dev;
> > > +}
> > > +
> > > +for (i = 0; i < feature->nr_irqs; i++)
> > > +ddev->irqs[i] = feature->irq_ctx[i].irq;
> > > +
> > > +ddev->num_irqs = feature->nr_irqs;
> >
> > Do we need to consider using IORESOURCE_IRQ here as well?
>
> The helper functions for IORESOURCE_IRQ are all for platform_devices,
> We need to define a set of functions similar to them, I think current
> implementation is simpler, for dfl bus and drivers.
If some case that it's going to reuse some platform device driver,
then dfl_device driver will create platform device, it has to pass the mmio
and irq resources to platform device driver, how you plan to do that?
> > > +static int dfl_devs_init(struct platform_device *pdev)
> > > +{
> > > +struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev-
> > > >dev);
> > > +struct dfl_feature *feature;
> > > +struct dfl_device *ddev;
> > > +
> > > +dfl_fpga_dev_for_each_feature(pdata, feature) {
> > > +if (feature->ioaddr || feature->priv)
> >
> > Why checks priv here?
>
> I want to make sure the dfl_device is not already created.
Is that a valid case that we expected? or sounds like error code needs
to be returned?
Thanks
Hao
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices
2020-08-06 7:11 ` Wu, Hao
@ 2020-08-06 8:50 ` Xu Yilun
0 siblings, 0 replies; 18+ messages in thread
From: Xu Yilun @ 2020-08-06 8:50 UTC (permalink / raw)
To: Wu, Hao
Cc: mdf, linux-fpga, linux-kernel, trix, lgoncalv, Matthew Gerlach,
Weight, Russell H
On Thu, Aug 06, 2020 at 03:11:14PM +0800, Wu, Hao wrote:
> > > > +static int dfl_bus_uevent(struct device *dev, struct kobj_uevent_env
> > *env)
> > > > +{
> > > > +struct dfl_device *ddev = to_dfl_dev(dev);
> > > > +
> > > > +return add_uevent_var(env, "MODALIAS=dfl:t%08Xf%04X",
> > > > + ddev->type, ddev->feature_id);
> > >
> > > Then we only print 12bit of feature_id will be enough?
> > > should we make type shorter as well as feature id?
> >
> > I could envision that we need a struct
> >
> > struct dfl_feature_id {
> > u16 id: 12;
> > }
> >
> > for it.
> >
> > But it seems more complex and I didn't see the benifit. We don't have to
> > worry about the invalid values cause we parse all the ddev->feature_id in
> > dfl driver, and ensures it will not be larger than 12bit value.
>
> Ideally type is only 4bits per spec, but looks like it's adding more zero before
> the type value, and also the feature id. This may not be a real problem, but
> may look a little wired, isn't it?
OK, I could change the print.
>
> >
> > > And do you think if we should add a new field for dfl version?
> >
> > I think it may not be necessary now. If we support dfl v1 in future, we
> > still could try to check uuid first, then fall back to type &
> > feature_id.
>
> I think it's all about the uevent and it's user, and for users, they may have to
> deal with different versions, right? As you mentioned, if the event will be
> different format for v1 and it's not compatible with v0, anyway we need
> the version sooner or later, is my understanding correct?
The version is not needed for uevent. The different formats of
uevents explain themselves (dfl v0 or dfl v1), is it?
If we add the dfl version in uevent then we should also add
the version in struct dfl_device_id, and all dfl driver should fill the
version info in its id_table. But actually that's redundent work to
driver developer.
The version in struct dfl_device may simplify the internal code on how
to format the uevent. But considering the only extension of dflv1 I
think checking the null uuid is also simply enough.
>
> >
> > Do you have any idea for the potential usage of dfl version.
> >
>
> > > > +/* then add irq resource */
> > > > +if (feature->nr_irqs) {
> > > > +ddev->irqs = kcalloc(feature->nr_irqs,
> > > > + sizeof(*ddev->irqs), GFP_KERNEL);
> > > > +if (!ddev->irqs) {
> > > > +ret = -ENOMEM;
> > > > +goto put_dev;
> > > > +}
> > > > +
> > > > +for (i = 0; i < feature->nr_irqs; i++)
> > > > +ddev->irqs[i] = feature->irq_ctx[i].irq;
> > > > +
> > > > +ddev->num_irqs = feature->nr_irqs;
> > >
> > > Do we need to consider using IORESOURCE_IRQ here as well?
> >
> > The helper functions for IORESOURCE_IRQ are all for platform_devices,
> > We need to define a set of functions similar to them, I think current
> > implementation is simpler, for dfl bus and drivers.
>
> If some case that it's going to reuse some platform device driver,
> then dfl_device driver will create platform device, it has to pass the mmio
> and irq resources to platform device driver, how you plan to do that?
I think even we create struct resource array for dfl_devices, the dfl
driver still has to create and fill its pdev resource as needed. There
is little chance the driver could just memcpy them. So the dfl driver
could fill the irq resources of pdev according to ddev->irqs & num_irqs.
>
> > > > +static int dfl_devs_init(struct platform_device *pdev)
> > > > +{
> > > > +struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev-
> > > > >dev);
> > > > +struct dfl_feature *feature;
> > > > +struct dfl_device *ddev;
> > > > +
> > > > +dfl_fpga_dev_for_each_feature(pdata, feature) {
> > > > +if (feature->ioaddr || feature->priv)
> > >
> > > Why checks priv here?
> >
> > I want to make sure the dfl_device is not already created.
>
> Is that a valid case that we expected? or sounds like error code needs
> to be returned?
OK. It is invalid, I could error out in this case.
>
> Thanks
> Hao
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
2020-08-04 7:05 [PATCH v3 0/4] Modularization of DFL private feature drivers Xu Yilun
` (2 preceding siblings ...)
2020-08-04 7:05 ` [PATCH v3 3/4] fpga: dfl: create a dfl bus type to support DFL devices Xu Yilun
@ 2020-08-04 7:05 ` Xu Yilun
2020-08-04 12:56 ` Wu, Hao
2020-08-04 18:45 ` Tom Rix
3 siblings, 2 replies; 18+ messages in thread
From: Xu Yilun @ 2020-08-04 7:05 UTC (permalink / raw)
To: mdf, linux-fpga, linux-kernel
Cc: trix, lgoncalv, yilun.xu, Wu Hao, Matthew Gerlach, Russ Weight
This patch adds support for the nios handshake private feature on Intel
N3000 FPGA Card. This private feature provides a handshake interface to
FPGA NIOS firmware, which receives retimer configuration command from host
and executes via an internal SPI master. When nios finished the
configuration, host takes over the ownership of the SPI master to control
an Intel MAX10 BMC Chip on the SPI bus.
For NIOS firmware handshake part, this driver requests the retimer
configuration for NIOS with parameters from module param, and adds some
sysfs nodes for user to query NIOS state.
For SPI part, this driver adds a spi-altera platform device as well as
the MAX10 BMC spi slave info. A spi-altera driver will be matched to
handle following the SPI work.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
---
v3: Add the doc for this driver.
Minor fixes for comments from Tom.
---
.../ABI/testing/sysfs-bus-dfl-devices-n3000-nios | 18 +
Documentation/fpga/dfl-n3000-nios.rst | 39 ++
Documentation/fpga/index.rst | 1 +
drivers/fpga/Kconfig | 12 +
drivers/fpga/Makefile | 2 +
drivers/fpga/dfl-n3000-nios.c | 518 +++++++++++++++++++++
6 files changed, 590 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
create mode 100644 Documentation/fpga/dfl-n3000-nios.rst
create mode 100644 drivers/fpga/dfl-n3000-nios.c
diff --git a/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios b/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
new file mode 100644
index 0000000..fcfcdbd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
@@ -0,0 +1,18 @@
+What: /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
+Date: July 2020
+KernelVersion: 5.9
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read-only. It returns the FEC mode of the ethernet retimer
+ configured by NIOS firmware. "rs" for RS FEC mode, "kr" for
+ KR FEC mode, "no" FOR NO FEC mode. The FEC mode could be set
+ by module parameters, but it could only be set once after the
+ board powers up.
+ Format: string
+
+What: /sys/bus/dfl/devices/dfl-fme.X.X/nios_fw_version
+Date: July 2020
+KernelVersion: 5.9
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read-only. It returns the NIOS firmware version in FPGA. Its
+ format is "major.minor.patch".
+ Format: %x.%x.%x
diff --git a/Documentation/fpga/dfl-n3000-nios.rst b/Documentation/fpga/dfl-n3000-nios.rst
new file mode 100644
index 0000000..391528e
--- /dev/null
+++ b/Documentation/fpga/dfl-n3000-nios.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+DFL N3000 Nios Private Feature Driver
+=====================================
+
+The dfl n3000 nios driver supports for the nios handshake private feature on
+Intel N3000 FPGA Card.
+
+This private feature provides a handshake interface to FPGA NIOS firmware,
+which receives the ethernet retimer configuration command from host and
+do the configuration via an internal SPI master. When nios finished the
+configuration, host takes over the ownership of the SPI master to control an
+Intel MAX10 BMC Chip on the SPI bus.
+
+So the driver does 2 major tasks on probe, requires NIOS firmware to configure
+the ethernet retimer by operating the handshake interfaces, and then creates a
+spi master platform device with the MAX10 device info in spi_board_info.
+
+Module Parameters
+=================
+
+The dfl n3000 nios driver supports the following module parameters:
+
+* fec_mode: string
+ Require the NIOS firmware to set the FEC mode of the ethernet retimer on
+ the PAC N3000 FPGA card. The possible values could be:
+
+ - "rs": RS FEC mode (default)
+ - "kr": KR FEC mode
+ - "no": NO FEC mode
+
+ The configuration could only be set once after the board powers up, the
+ firmware will not accept a second configuration afterward. So the fec mode
+ will not be changed if the module is reloaded with a different param value.
+
+ The configured value of the fec mode could be queried from sysfs node:
+
+ /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
diff --git a/Documentation/fpga/index.rst b/Documentation/fpga/index.rst
index f80f956..5fd3c37 100644
--- a/Documentation/fpga/index.rst
+++ b/Documentation/fpga/index.rst
@@ -8,6 +8,7 @@ fpga
:maxdepth: 1
dfl
+ dfl-n3000-nios
.. only:: subproject and html
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 7cd5a29..f820142 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -191,6 +191,18 @@ config FPGA_DFL_AFU
to the FPGA infrastructure via a Port. There may be more than one
Port/AFU per DFL based FPGA device.
+config FPGA_DFL_N3000_NIOS
+ tristate "FPGA DFL N3000 NIOS Driver"
+ depends on FPGA_DFL
+ select REGMAP
+ help
+ This is the driver for the nios handshake private feature on Intel
+ N3000 FPGA Card. This private feature provides a handshake interface
+ to FPGA NIOS firmware, which receives retimer configuration command
+ from host and executes via an internal SPI master. When nios finished
+ the configuration, host takes over the ownership of the SPI master to
+ control an Intel MAX10 BMC Chip on the SPI bus.
+
config FPGA_DFL_PCI
tristate "FPGA DFL PCIe Device Driver"
depends on PCI && FPGA_DFL
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index d8e21df..27f20f2 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -44,5 +44,7 @@ dfl-fme-objs += dfl-fme-perf.o
dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
dfl-afu-objs += dfl-afu-error.o
+obj-$(CONFIG_FPGA_DFL_N3000_NIOS) += dfl-n3000-nios.o
+
# Drivers for FPGAs which implement DFL
obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o
diff --git a/drivers/fpga/dfl-n3000-nios.c b/drivers/fpga/dfl-n3000-nios.c
new file mode 100644
index 0000000..041d759
--- /dev/null
+++ b/drivers/fpga/dfl-n3000-nios.c
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for DFL N3000 NIOS private feature
+ *
+ * Copyright (C) 2019-2020 Intel Corporation, Inc.
+ *
+ * Authors:
+ * Wu Hao <hao.wu@intel.com>
+ * Xu Yilun <yilun.xu@intel.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/stddef.h>
+#include <linux/spi/altera.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+
+#include "dfl.h"
+
+/**
+ * DOC: fec_mode (string)
+ *
+ * Require the NIOS firmware to set the FEC mode of the ethernet retimer on
+ * PAC N3000 FPGA card.
+ *
+ * "rs": RS FEC mode (default)
+ *
+ * "kr": KR FEC mode
+ *
+ * "no": NO FEC mode
+ *
+ * The configuration could only be set once after the board powers up, the
+ * firmware will not accept a second configuration afterward. So the fec mode
+ * will not be changed if the module is reloaded with a different param value.
+ *
+ * The configured value of the fec_mode could be queried from sysfs node:
+ *
+ * /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
+ */
+static char *fec_mode = "rs";
+module_param(fec_mode, charp, 0444);
+MODULE_PARM_DESC(child, "FEC mode");
+
+/* N3000 NIOS private feature registers */
+#define NIOS_SPI_PARAM 0x8
+#define PARAM_SHIFT_MODE_MSK BIT_ULL(1)
+#define PARAM_SHIFT_MODE_MSB 0
+#define PARAM_SHIFT_MODE_LSB 1
+#define PARAM_DATA_WIDTH GENMASK_ULL(7, 2)
+#define PARAM_NUM_CS GENMASK_ULL(13, 8)
+#define PARAM_CLK_POL BIT_ULL(14)
+#define PARAM_CLK_PHASE BIT_ULL(15)
+#define PARAM_PERIPHERAL_ID GENMASK_ULL(47, 32)
+
+#define NIOS_SPI_CTRL 0x10
+#define CTRL_WR_DATA GENMASK_ULL(31, 0)
+#define CTRL_ADDR GENMASK_ULL(44, 32)
+#define CTRL_CMD_MSK GENMASK_ULL(63, 62)
+#define CTRL_CMD_NOP 0
+#define CTRL_CMD_RD 1
+#define CTRL_CMD_WR 2
+
+#define NIOS_SPI_STAT 0x18
+#define STAT_RD_DATA GENMASK_ULL(31, 0)
+#define STAT_RW_VAL BIT_ULL(32)
+
+/* nios handshake registers, indirect access */
+#define NIOS_INIT 0x1000
+#define NIOS_INIT_DONE BIT(0)
+#define NIOS_INIT_START BIT(1)
+/* Mode for PKVL A, link 0, the same below */
+#define REQ_FEC_MODE_A0_MSK GENMASK(9, 8)
+#define REQ_FEC_MODE_A1_MSK GENMASK(11, 10)
+#define REQ_FEC_MODE_A2_MSK GENMASK(13, 12)
+#define REQ_FEC_MODE_A3_MSK GENMASK(15, 14)
+#define REQ_FEC_MODE_B0_MSK GENMASK(17, 16)
+#define REQ_FEC_MODE_B1_MSK GENMASK(19, 18)
+#define REQ_FEC_MODE_B2_MSK GENMASK(21, 20)
+#define REQ_FEC_MODE_B3_MSK GENMASK(23, 22)
+#define REQ_FEC_MODE_NO 0x0
+#define REQ_FEC_MODE_KR 0x1
+#define REQ_FEC_MODE_RS 0x2
+
+#define NIOS_FW_VERSION 0x1004
+#define NIOS_FW_VERSION_PATCH GENMASK(23, 20)
+#define NIOS_FW_VERSION_MINOR GENMASK(27, 24)
+#define NIOS_FW_VERSION_MAJOR GENMASK(31, 28)
+
+#define PKVL_A_MODE_STS 0x1020
+#define PKVL_B_MODE_STS 0x1024
+#define PKVL_MODE_STS_GROUP_MSK GENMASK(15, 8)
+#define PKVL_MODE_STS_GROUP_OK 0x0
+#define PKVL_MODE_STS_ID_MSK GENMASK(7, 0)
+
+#define NS_REGBUS_WAIT_TIMEOUT 10000 /* loop count */
+#define NIOS_INIT_TIMEOUT 10000000 /* usec */
+#define NIOS_INIT_TIME_INTV 100000 /* usec */
+
+struct dfl_n3000_nios {
+ void __iomem *base;
+ struct regmap *regmap;
+ struct device *dev;
+ struct platform_device *altera_spi;
+};
+
+static int n3000_nios_writel(struct dfl_n3000_nios *ns, unsigned int reg,
+ unsigned int val)
+{
+ int ret;
+
+ ret = regmap_write(ns->regmap, reg, val);
+ if (ret)
+ dev_err(ns->dev, "fail to write reg 0x%x val 0x%x: %d\n",
+ reg, val, ret);
+
+ return ret;
+}
+
+static int n3000_nios_readl(struct dfl_n3000_nios *ns, unsigned int reg,
+ unsigned int *val)
+{
+ int ret;
+
+ ret = regmap_read(ns->regmap, reg, val);
+ if (ret)
+ dev_err(ns->dev, "fail to read reg 0x%x: %d\n", reg, ret);
+
+ return ret;
+}
+
+static ssize_t nios_fw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_n3000_nios *ns = dev_get_drvdata(dev);
+ unsigned int val;
+ int ret;
+
+ ret = n3000_nios_readl(ns, NIOS_FW_VERSION, &val);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%x.%x.%x\n",
+ (u8)FIELD_GET(NIOS_FW_VERSION_MAJOR, val),
+ (u8)FIELD_GET(NIOS_FW_VERSION_MINOR, val),
+ (u8)FIELD_GET(NIOS_FW_VERSION_PATCH, val));
+}
+static DEVICE_ATTR_RO(nios_fw_version);
+
+static ssize_t fec_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_n3000_nios *ns = dev_get_drvdata(dev);
+ unsigned int val, mode;
+ int ret;
+
+ ret = n3000_nios_readl(ns, NIOS_INIT, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * FEC mode should always be the same for all links, as we set them
+ * in this way.
+ */
+ mode = FIELD_GET(REQ_FEC_MODE_A0_MSK, val);
+ if (mode != FIELD_GET(REQ_FEC_MODE_A1_MSK, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_A2_MSK, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_A3_MSK, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_B0_MSK, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_B1_MSK, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_B2_MSK, val) ||
+ mode != FIELD_GET(REQ_FEC_MODE_B3_MSK, val))
+ return -EFAULT;
+
+ switch (mode) {
+ case REQ_FEC_MODE_NO:
+ return sprintf(buf, "no\n");
+ case REQ_FEC_MODE_KR:
+ return sprintf(buf, "kr\n");
+ case REQ_FEC_MODE_RS:
+ return sprintf(buf, "rs\n");
+ }
+
+ return -EFAULT;
+}
+static DEVICE_ATTR_RO(fec_mode);
+
+static struct attribute *n3000_nios_attrs[] = {
+ &dev_attr_nios_fw_version.attr,
+ &dev_attr_fec_mode.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(n3000_nios);
+
+static bool init_error_detected(struct dfl_n3000_nios *ns)
+{
+ unsigned int val;
+
+ if (n3000_nios_readl(ns, PKVL_A_MODE_STS, &val))
+ return true;
+
+ if (FIELD_GET(PKVL_MODE_STS_GROUP_MSK, val) == PKVL_MODE_STS_GROUP_OK)
+ return true;
+
+ if (n3000_nios_readl(ns, PKVL_B_MODE_STS, &val))
+ return true;
+
+ if (FIELD_GET(PKVL_MODE_STS_GROUP_MSK, val) == PKVL_MODE_STS_GROUP_OK)
+ return true;
+
+ return false;
+}
+
+static void dump_error_stat(struct dfl_n3000_nios *ns)
+{
+ unsigned int val;
+
+ if (n3000_nios_readl(ns, PKVL_A_MODE_STS, &val)) {
+ dev_err(ns->dev, "Could not read register PKVL_A_MODE_STS\n");
+ return;
+ }
+
+ dev_info(ns->dev, "PKVL_A_MODE_STS %x\n", val);
+
+ if (n3000_nios_readl(ns, PKVL_B_MODE_STS, &val)) {
+ dev_err(ns->dev, "Could not read register PKVL_B_MODE_STS\n");
+ return;
+ }
+
+ dev_info(ns->dev, "PKVL_B_MODE_STS %x\n", val);
+}
+
+static int n3000_nios_init_done_check(struct dfl_n3000_nios *ns)
+{
+ struct device *dev = ns->dev;
+ unsigned int val, mode;
+ int ret;
+
+ /*
+ * this SPI is shared by NIOS core inside FPGA, NIOS will use this SPI
+ * master to do some one time initialization after power up, and then
+ * release the control to OS. driver needs to poll on INIT_DONE to
+ * see when driver could take the control.
+ *
+ * Please note that after 3.x.x version, INIT_START is introduced, so
+ * driver needs to trigger START firstly and then check INIT_DONE.
+ */
+
+ ret = n3000_nios_readl(ns, NIOS_FW_VERSION, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * If NIOS version register is totally uninitialized(== 0x0), then the
+ * NIOS firmware is missing. So host could take control of SPI master
+ * safely, but initialization work for NIOS is not done. This is an
+ * issue of FPGA image. We didn't error out because we need SPI master
+ * to reprogram a new image.
+ */
+ if (val == 0) {
+ dev_warn(dev, "NIOS version reg = 0x%x, skip INIT_DONE check, but PKVL may be uninitialized\n",
+ val);
+ return 0;
+ }
+
+ if (FIELD_GET(NIOS_FW_VERSION_MAJOR, val) >= 3) {
+ /* read NIOS_INIT to check if PKVL INIT done or not */
+ ret = n3000_nios_readl(ns, NIOS_INIT, &val);
+ if (ret)
+ return ret;
+
+ /* check if PKVLs are initialized already */
+ if (val & NIOS_INIT_DONE || val & NIOS_INIT_START)
+ goto nios_init_done;
+
+ /* configure FEC mode per module param */
+ val = NIOS_INIT_START;
+
+ /* FEC mode will be ignored by hardware in 10G mode */
+ if (!strcmp(fec_mode, "no"))
+ mode = REQ_FEC_MODE_NO;
+ else if (!strcmp(fec_mode, "kr"))
+ mode = REQ_FEC_MODE_KR;
+ else if (!strcmp(fec_mode, "rs"))
+ mode = REQ_FEC_MODE_RS;
+ else
+ return -EINVAL;
+
+ /* set the same FEC mode for all links */
+ val |= FIELD_PREP(REQ_FEC_MODE_A0_MSK, mode) |
+ FIELD_PREP(REQ_FEC_MODE_A1_MSK, mode) |
+ FIELD_PREP(REQ_FEC_MODE_A2_MSK, mode) |
+ FIELD_PREP(REQ_FEC_MODE_A3_MSK, mode) |
+ FIELD_PREP(REQ_FEC_MODE_B0_MSK, mode) |
+ FIELD_PREP(REQ_FEC_MODE_B1_MSK, mode) |
+ FIELD_PREP(REQ_FEC_MODE_B2_MSK, mode) |
+ FIELD_PREP(REQ_FEC_MODE_B3_MSK, mode);
+
+ ret = n3000_nios_writel(ns, NIOS_INIT, val);
+ if (ret)
+ return ret;
+ }
+
+nios_init_done:
+ /* polls on NIOS_INIT_DONE */
+ ret = regmap_read_poll_timeout(ns->regmap, NIOS_INIT, val,
+ val & NIOS_INIT_DONE,
+ NIOS_INIT_TIME_INTV,
+ NIOS_INIT_TIMEOUT);
+ if (ret) {
+ dev_err(dev, "NIOS_INIT_DONE %s\n",
+ (ret == -ETIMEDOUT) ? "timed out" : "check error");
+ goto dump_sts;
+ }
+
+ /*
+ * after INIT_DONE is detected, it still needs to check if any ERR
+ * detected.
+ * We won't error out here even if error detected. Nios will release
+ * spi controller when INIT_DONE is set, so driver could continue to
+ * initialize spi controller device.
+ */
+ if (init_error_detected(ns)) {
+ dev_warn(dev, "NIOS_INIT_DONE OK, but err found during init\n");
+ goto dump_sts;
+ }
+ return 0;
+
+dump_sts:
+ dump_error_stat(ns);
+
+ return ret;
+}
+
+struct spi_board_info m10_n3000_info = {
+ .modalias = "m10-n3000",
+ .max_speed_hz = 12500000,
+ .bus_num = 0,
+ .chip_select = 0,
+};
+
+static int create_altera_spi_controller(struct dfl_n3000_nios *ns)
+{
+ struct altera_spi_platform_data pdata = { 0 };
+ struct platform_device_info pdevinfo = { 0 };
+ void __iomem *base = ns->base;
+ u64 v;
+
+ v = readq(base + NIOS_SPI_PARAM);
+
+ pdata.mode_bits = SPI_CS_HIGH;
+ if (FIELD_GET(PARAM_CLK_POL, v))
+ pdata.mode_bits |= SPI_CPOL;
+ if (FIELD_GET(PARAM_CLK_PHASE, v))
+ pdata.mode_bits |= SPI_CPHA;
+
+ pdata.num_chipselect = FIELD_GET(PARAM_NUM_CS, v);
+ pdata.bits_per_word_mask =
+ SPI_BPW_RANGE_MASK(1, FIELD_GET(PARAM_DATA_WIDTH, v));
+
+ pdata.num_devices = 1;
+ pdata.devices = &m10_n3000_info;
+
+ dev_dbg(ns->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__,
+ pdata.num_chipselect, pdata.bits_per_word_mask,
+ pdata.mode_bits);
+
+ pdevinfo.name = "subdev_spi_altera";
+ pdevinfo.id = PLATFORM_DEVID_AUTO;
+ pdevinfo.parent = ns->dev;
+ pdevinfo.data = &pdata;
+ pdevinfo.size_data = sizeof(pdata);
+
+ ns->altera_spi = platform_device_register_full(&pdevinfo);
+ return PTR_ERR_OR_ZERO(ns->altera_spi);
+}
+
+static void destroy_altera_spi_controller(struct dfl_n3000_nios *ns)
+{
+ platform_device_unregister(ns->altera_spi);
+}
+
+/* ns is the abbreviation of nios_spi */
+static int ns_bus_poll_stat_timeout(void __iomem *base, u64 *v)
+{
+ int loops = NS_REGBUS_WAIT_TIMEOUT;
+
+ /*
+ * We don't use the time based timeout here for performance.
+ *
+ * The image reprograming engine is on max10 bmc chip, which is the spi
+ * device connected to altera spi controller. So the regbus read/write
+ * is on the critical path of PAC N3000 image reprograming. And usually
+ * the state changes in few loops, the time based timeout checking will
+ * add too much overhead on it.
+ *
+ * Anyway, 10000 times loop is large enough.
+ */
+ do {
+ *v = readq(base + NIOS_SPI_STAT);
+ if (*v & STAT_RW_VAL)
+ break;
+ cpu_relax();
+ } while (--loops);
+
+ return loops ? 0 : -ETIMEDOUT;
+}
+
+static int ns_bus_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+ void __iomem *base = context;
+ u64 v = 0;
+
+ v |= FIELD_PREP(CTRL_CMD_MSK, CTRL_CMD_WR);
+ v |= FIELD_PREP(CTRL_ADDR, reg);
+ v |= FIELD_PREP(CTRL_WR_DATA, val);
+ writeq(v, base + NIOS_SPI_CTRL);
+
+ return ns_bus_poll_stat_timeout(base, &v);
+}
+
+static int ns_bus_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+ void __iomem *base = context;
+ u64 v = 0;
+ int ret;
+
+ v |= FIELD_PREP(CTRL_CMD_MSK, CTRL_CMD_RD);
+ v |= FIELD_PREP(CTRL_ADDR, reg);
+ writeq(v, base + NIOS_SPI_CTRL);
+
+ ret = ns_bus_poll_stat_timeout(base, &v);
+ if (!ret)
+ *val = FIELD_GET(STAT_RD_DATA, v);
+
+ return ret;
+}
+
+static const struct regmap_config ns_regbus_cfg = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .fast_io = true,
+
+ .reg_write = ns_bus_reg_write,
+ .reg_read = ns_bus_reg_read,
+};
+
+static int dfl_n3000_nios_probe(struct dfl_device *dfl_dev)
+{
+ struct device *dev = &dfl_dev->dev;
+ struct dfl_n3000_nios *ns;
+ int ret;
+
+ ns = devm_kzalloc(dev, sizeof(*ns), GFP_KERNEL);
+ if (!ns)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dfl_dev->dev, ns);
+
+ ns->dev = dev;
+
+ ns->base = devm_ioremap_resource(&dfl_dev->dev, &dfl_dev->mmio_res);
+ if (IS_ERR(ns->base)) {
+ dev_err(dev, "get mem resource fail!\n");
+ return PTR_ERR(ns->base);
+ }
+
+ ns->regmap = devm_regmap_init(dev, NULL, ns->base, &ns_regbus_cfg);
+ if (IS_ERR(ns->regmap))
+ return PTR_ERR(ns->regmap);
+
+ ret = n3000_nios_init_done_check(ns);
+ if (ret)
+ return ret;
+
+ ret = create_altera_spi_controller(ns);
+ if (ret)
+ dev_err(dev, "altera spi controller create failed: %d\n", ret);
+
+ return ret;
+}
+
+static void dfl_n3000_nios_remove(struct dfl_device *dfl_dev)
+{
+ struct dfl_n3000_nios *ns = dev_get_drvdata(&dfl_dev->dev);
+
+ destroy_altera_spi_controller(ns);
+}
+
+#define FME_FEATURE_ID_N3000_NIOS 0xd
+
+static const struct dfl_device_id dfl_n3000_nios_ids[] = {
+ { FME_ID, FME_FEATURE_ID_N3000_NIOS },
+ { }
+};
+
+static struct dfl_driver dfl_n3000_nios_driver = {
+ .drv = {
+ .name = "dfl-n3000-nios",
+ .dev_groups = n3000_nios_groups,
+ },
+ .id_table = dfl_n3000_nios_ids,
+ .probe = dfl_n3000_nios_probe,
+ .remove = dfl_n3000_nios_remove,
+};
+
+module_dfl_driver(dfl_n3000_nios_driver);
+
+MODULE_DEVICE_TABLE(dfl, dfl_n3000_nios_ids);
+MODULE_DESCRIPTION("DFL N3000 NIOS driver");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* RE: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
2020-08-04 7:05 ` [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature Xu Yilun
@ 2020-08-04 12:56 ` Wu, Hao
2020-08-05 8:35 ` Xu Yilun
2020-08-04 18:45 ` Tom Rix
1 sibling, 1 reply; 18+ messages in thread
From: Wu, Hao @ 2020-08-04 12:56 UTC (permalink / raw)
To: Xu, Yilun, mdf, linux-fpga, linux-kernel
Cc: trix, lgoncalv, Matthew Gerlach, Weight, Russell H
> Subject: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
>
> This patch adds support for the nios handshake private feature on Intel
> N3000 FPGA Card. This private feature provides a handshake interface to
> FPGA NIOS firmware, which receives retimer configuration command from
> host
> and executes via an internal SPI master. When nios finished the
> configuration, host takes over the ownership of the SPI master to control
> an Intel MAX10 BMC Chip on the SPI bus.
Maybe you can add some more description on what NIOS is here for people
to understand this better.
>
> For NIOS firmware handshake part, this driver requests the retimer
> configuration for NIOS with parameters from module param, and adds some
> sysfs nodes for user to query NIOS state.
>
> For SPI part, this driver adds a spi-altera platform device as well as
> the MAX10 BMC spi slave info. A spi-altera driver will be matched to
> handle following the SPI work.
>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> Signed-off-by: Wu Hao <hao.wu@intel.com>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> Reviewed-by: Tom Rix <trix@redhat.com>
> ---
> v3: Add the doc for this driver.
> Minor fixes for comments from Tom.
> ---
> .../ABI/testing/sysfs-bus-dfl-devices-n3000-nios | 18 +
> Documentation/fpga/dfl-n3000-nios.rst | 39 ++
> Documentation/fpga/index.rst | 1 +
> drivers/fpga/Kconfig | 12 +
> drivers/fpga/Makefile | 2 +
> drivers/fpga/dfl-n3000-nios.c | 518 +++++++++++++++++++++
> 6 files changed, 590 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-dfl-devices-
> n3000-nios
> create mode 100644 Documentation/fpga/dfl-n3000-nios.rst
> create mode 100644 drivers/fpga/dfl-n3000-nios.c
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
> b/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
> new file mode 100644
> index 0000000..fcfcdbd
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-dfl-devices-n3000-nios
> @@ -0,0 +1,18 @@
> +What: /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
> +Date: July 2020
> +KernelVersion: 5.9
I don't think we can catch up the 5.9-rc1 at this moment, so 5.10 please.
> +Contact: Xu Yilun <yilun.xu@intel.com>
> +Description: Read-only. It returns the FEC mode of the ethernet retimer
> + configured by NIOS firmware. "rs" for RS FEC mode, "kr" for
> + KR FEC mode, "no" FOR NO FEC mode. The FEC mode could
> be set
> + by module parameters, but it could only be set once after the
> + board powers up.
> + Format: string
> +
> +What: /sys/bus/dfl/devices/dfl-fme.X.X/nios_fw_version
I think you have already modified the device name to dfl-dev.X, right?
> +Date: July 2020
> +KernelVersion: 5.9
Ditto.
> +Contact: Xu Yilun <yilun.xu@intel.com>
> +Description: Read-only. It returns the NIOS firmware version in FPGA. Its
> + format is "major.minor.patch".
> + Format: %x.%x.%x
> diff --git a/Documentation/fpga/dfl-n3000-nios.rst
> b/Documentation/fpga/dfl-n3000-nios.rst
> new file mode 100644
> index 0000000..391528e
> --- /dev/null
> +++ b/Documentation/fpga/dfl-n3000-nios.rst
> @@ -0,0 +1,39 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=====================================
> +DFL N3000 Nios Private Feature Driver
> +=====================================
> +
> +The dfl n3000 nios driver supports for the nios handshake private feature
> on
> +Intel N3000 FPGA Card.
> +
> +This private feature provides a handshake interface to FPGA NIOS firmware,
> +which receives the ethernet retimer configuration command from host and
> +do the configuration via an internal SPI master. When nios finished the
> +configuration, host takes over the ownership of the SPI master to control an
> +Intel MAX10 BMC Chip on the SPI bus.
Maybe it's better to unify the naming - Nios
> +
> +So the driver does 2 major tasks on probe, requires NIOS firmware to
> configure
> +the ethernet retimer by operating the handshake interfaces, and then
> creates a
> +spi master platform device with the MAX10 device info in spi_board_info.
> +
> +Module Parameters
> +=================
> +
> +The dfl n3000 nios driver supports the following module parameters:
> +
> +* fec_mode: string
> + Require the NIOS firmware to set the FEC mode of the ethernet retimer on
> + the PAC N3000 FPGA card. The possible values could be:
> +
> + - "rs": RS FEC mode (default)
> + - "kr": KR FEC mode
> + - "no": NO FEC mode
> +
> + The configuration could only be set once after the board powers up, the
> + firmware will not accept a second configuration afterward. So the fec
> mode
> + will not be changed if the module is reloaded with a different param value.
> +
> + The configured value of the fec mode could be queried from sysfs node:
> +
> + /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
> diff --git a/Documentation/fpga/index.rst b/Documentation/fpga/index.rst
> index f80f956..5fd3c37 100644
> --- a/Documentation/fpga/index.rst
> +++ b/Documentation/fpga/index.rst
> @@ -8,6 +8,7 @@ fpga
> :maxdepth: 1
>
> dfl
> + dfl-n3000-nios
>
> .. only:: subproject and html
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index 7cd5a29..f820142 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -191,6 +191,18 @@ config FPGA_DFL_AFU
> to the FPGA infrastructure via a Port. There may be more than one
> Port/AFU per DFL based FPGA device.
>
> +config FPGA_DFL_N3000_NIOS
> + tristate "FPGA DFL N3000 NIOS Driver"
> + depends on FPGA_DFL
> + select REGMAP
> + help
> + This is the driver for the nios handshake private feature on Intel
> + N3000 FPGA Card. This private feature provides a handshake
> interface
> + to FPGA NIOS firmware, which receives retimer configuration
> command
> + from host and executes via an internal SPI master. When nios
> finished
> + the configuration, host takes over the ownership of the SPI master
> to
> + control an Intel MAX10 BMC Chip on the SPI bus.
> +
> config FPGA_DFL_PCI
> tristate "FPGA DFL PCIe Device Driver"
> depends on PCI && FPGA_DFL
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index d8e21df..27f20f2 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -44,5 +44,7 @@ dfl-fme-objs += dfl-fme-perf.o
> dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
> dfl-afu-objs += dfl-afu-error.o
>
> +obj-$(CONFIG_FPGA_DFL_N3000_NIOS) += dfl-n3000-nios.o
> +
> # Drivers for FPGAs which implement DFL
> obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o
> diff --git a/drivers/fpga/dfl-n3000-nios.c b/drivers/fpga/dfl-n3000-nios.c
> new file mode 100644
> index 0000000..041d759
> --- /dev/null
> +++ b/drivers/fpga/dfl-n3000-nios.c
> @@ -0,0 +1,518 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for DFL N3000 NIOS private feature
Maybe "DFL device driver for Nios private feature on Intel PAC N3000".
It must be described clearly to avoid confusing.
> + *
> + * Copyright (C) 2019-2020 Intel Corporation, Inc.
> + *
> + * Authors:
> + * Wu Hao <hao.wu@intel.com>
> + * Xu Yilun <yilun.xu@intel.com>
> + */
> +#include <linux/bitfield.h>
> +#include <linux/errno.h>
> +#include <linux/io.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/stddef.h>
> +#include <linux/spi/altera.h>
> +#include <linux/spi/spi.h>
> +#include <linux/types.h>
> +
> +#include "dfl.h"
> +
> +/**
> + * DOC: fec_mode (string)
> + *
> + * Require the NIOS firmware to set the FEC mode of the ethernet retimer
> on
> + * PAC N3000 FPGA card.
> + *
> + * "rs": RS FEC mode (default)
> + *
> + * "kr": KR FEC mode
> + *
> + * "no": NO FEC mode
> + *
> + * The configuration could only be set once after the board powers up, the
> + * firmware will not accept a second configuration afterward. So the fec
> mode
> + * will not be changed if the module is reloaded with a different param
> value.
> + *
> + * The configured value of the fec_mode could be queried from sysfs node:
> + *
> + * /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
s/dfl-fme.X.X/dfl-dev.X/
> + */
> +static char *fec_mode = "rs";
> +module_param(fec_mode, charp, 0444);
> +MODULE_PARM_DESC(child, "FEC mode");
Why it's child here? This description string doesn't help at all I think. : (
You can put the description from code comments into this description.
> +
> +/* N3000 NIOS private feature registers */
> +#define NIOS_SPI_PARAM 0x8
> +#define PARAM_SHIFT_MODE_MSK BIT_ULL(1)
> +#define PARAM_SHIFT_MODE_MSB 0
> +#define PARAM_SHIFT_MODE_LSB 1
> +#define PARAM_DATA_WIDTH GENMASK_ULL(7, 2)
> +#define PARAM_NUM_CS GENMASK_ULL(13, 8)
> +#define PARAM_CLK_POL BIT_ULL(14)
> +#define PARAM_CLK_PHASE BIT_ULL(15)
> +#define PARAM_PERIPHERAL_ID GENMASK_ULL(47, 32)
> +
> +#define NIOS_SPI_CTRL 0x10
> +#define CTRL_WR_DATA GENMASK_ULL(31, 0)
> +#define CTRL_ADDR GENMASK_ULL(44, 32)
> +#define CTRL_CMD_MSK GENMASK_ULL(63, 62)
> +#define CTRL_CMD_NOP 0
> +#define CTRL_CMD_RD 1
> +#define CTRL_CMD_WR 2
> +
> +#define NIOS_SPI_STAT 0x18
> +#define STAT_RD_DATA GENMASK_ULL(31, 0)
> +#define STAT_RW_VAL BIT_ULL(32)
> +
> +/* nios handshake registers, indirect access */
Ditto
> +#define NIOS_INIT 0x1000
> +#define NIOS_INIT_DONE BIT(0)
> +#define NIOS_INIT_START BIT(1)
> +/* Mode for PKVL A, link 0, the same below */
> +#define REQ_FEC_MODE_A0_MSK GENMASK(9, 8)
> +#define REQ_FEC_MODE_A1_MSK GENMASK(11, 10)
> +#define REQ_FEC_MODE_A2_MSK GENMASK(13, 12)
> +#define REQ_FEC_MODE_A3_MSK GENMASK(15, 14)
> +#define REQ_FEC_MODE_B0_MSK GENMASK(17, 16)
> +#define REQ_FEC_MODE_B1_MSK GENMASK(19, 18)
> +#define REQ_FEC_MODE_B2_MSK GENMASK(21, 20)
> +#define REQ_FEC_MODE_B3_MSK GENMASK(23, 22)
> +#define REQ_FEC_MODE_NO 0x0
> +#define REQ_FEC_MODE_KR 0x1
> +#define REQ_FEC_MODE_RS 0x2
What does REQ mean?
> +
> +#define NIOS_FW_VERSION 0x1004
> +#define NIOS_FW_VERSION_PATCH GENMASK(23, 20)
> +#define NIOS_FW_VERSION_MINOR GENMASK(27, 24)
> +#define NIOS_FW_VERSION_MAJOR GENMASK(31, 28)
> +
> +#define PKVL_A_MODE_STS 0x1020
> +#define PKVL_B_MODE_STS 0x1024
> +#define PKVL_MODE_STS_GROUP_MSK GENMASK(15, 8)
> +#define PKVL_MODE_STS_GROUP_OK 0x0
> +#define PKVL_MODE_STS_ID_MSK GENMASK(7, 0)
> +
> +#define NS_REGBUS_WAIT_TIMEOUT 10000 /* loop count */
> +#define NIOS_INIT_TIMEOUT 10000000 /* usec */
> +#define NIOS_INIT_TIME_INTV 100000 /* usec */
> +
> +struct dfl_n3000_nios {
> + void __iomem *base;
> + struct regmap *regmap;
> + struct device *dev;
> + struct platform_device *altera_spi;
> +};
> +
> +static int n3000_nios_writel(struct dfl_n3000_nios *ns, unsigned int reg,
> + unsigned int val)
> +{
> + int ret;
> +
> + ret = regmap_write(ns->regmap, reg, val);
> + if (ret)
> + dev_err(ns->dev, "fail to write reg 0x%x val 0x%x: %d\n",
> + reg, val, ret);
Maybe this log printing should be added in regmap implementation side?
Then every user can save some code.
> +
> + return ret;
> +}
> +
> +static int n3000_nios_readl(struct dfl_n3000_nios *ns, unsigned int reg,
> + unsigned int *val)
> +{
> + int ret;
> +
> + ret = regmap_read(ns->regmap, reg, val);
> + if (ret)
> + dev_err(ns->dev, "fail to read reg 0x%x: %d\n", reg, ret);
> +
> + return ret;
> +}
> +
> +static ssize_t nios_fw_version_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_n3000_nios *ns = dev_get_drvdata(dev);
> + unsigned int val;
> + int ret;
> +
> + ret = n3000_nios_readl(ns, NIOS_FW_VERSION, &val);
> + if (ret)
> + return ret;
> +
> + return sprintf(buf, "%x.%x.%x\n",
> + (u8)FIELD_GET(NIOS_FW_VERSION_MAJOR, val),
> + (u8)FIELD_GET(NIOS_FW_VERSION_MINOR, val),
> + (u8)FIELD_GET(NIOS_FW_VERSION_PATCH, val));
> +}
> +static DEVICE_ATTR_RO(nios_fw_version);
> +
> +static ssize_t fec_mode_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dfl_n3000_nios *ns = dev_get_drvdata(dev);
> + unsigned int val, mode;
> + int ret;
> +
> + ret = n3000_nios_readl(ns, NIOS_INIT, &val);
> + if (ret)
> + return ret;
> +
> + /*
> + * FEC mode should always be the same for all links, as we set them
> + * in this way.
> + */
> + mode = FIELD_GET(REQ_FEC_MODE_A0_MSK, val);
> + if (mode != FIELD_GET(REQ_FEC_MODE_A1_MSK, val) ||
> + mode != FIELD_GET(REQ_FEC_MODE_A2_MSK, val) ||
> + mode != FIELD_GET(REQ_FEC_MODE_A3_MSK, val) ||
> + mode != FIELD_GET(REQ_FEC_MODE_B0_MSK, val) ||
> + mode != FIELD_GET(REQ_FEC_MODE_B1_MSK, val) ||
> + mode != FIELD_GET(REQ_FEC_MODE_B2_MSK, val) ||
> + mode != FIELD_GET(REQ_FEC_MODE_B3_MSK, val))
> + return -EFAULT;
> +
> + switch (mode) {
> + case REQ_FEC_MODE_NO:
> + return sprintf(buf, "no\n");
> + case REQ_FEC_MODE_KR:
> + return sprintf(buf, "kr\n");
> + case REQ_FEC_MODE_RS:
> + return sprintf(buf, "rs\n");
> + }
> +
> + return -EFAULT;
> +}
> +static DEVICE_ATTR_RO(fec_mode);
> +
> +static struct attribute *n3000_nios_attrs[] = {
> + &dev_attr_nios_fw_version.attr,
> + &dev_attr_fec_mode.attr,
> + NULL,
> +};
> +ATTRIBUTE_GROUPS(n3000_nios);
> +
> +static bool init_error_detected(struct dfl_n3000_nios *ns)
> +{
> + unsigned int val;
> +
> + if (n3000_nios_readl(ns, PKVL_A_MODE_STS, &val))
> + return true;
> +
> + if (FIELD_GET(PKVL_MODE_STS_GROUP_MSK, val) ==
> PKVL_MODE_STS_GROUP_OK)
> + return true;
> +
> + if (n3000_nios_readl(ns, PKVL_B_MODE_STS, &val))
> + return true;
> +
> + if (FIELD_GET(PKVL_MODE_STS_GROUP_MSK, val) ==
> PKVL_MODE_STS_GROUP_OK)
> + return true;
> +
> + return false;
> +}
> +
> +static void dump_error_stat(struct dfl_n3000_nios *ns)
> +{
> + unsigned int val;
> +
> + if (n3000_nios_readl(ns, PKVL_A_MODE_STS, &val)) {
> + dev_err(ns->dev, "Could not read register
> PKVL_A_MODE_STS\n");
Why similar error log here again?
> + return;
> + }
> +
> + dev_info(ns->dev, "PKVL_A_MODE_STS %x\n", val);
> +
> + if (n3000_nios_readl(ns, PKVL_B_MODE_STS, &val)) {
> + dev_err(ns->dev, "Could not read register
> PKVL_B_MODE_STS\n");
> + return;
> + }
> +
> + dev_info(ns->dev, "PKVL_B_MODE_STS %x\n", val);
> +}
> +
> +static int n3000_nios_init_done_check(struct dfl_n3000_nios *ns)
> +{
> + struct device *dev = ns->dev;
> + unsigned int val, mode;
> + int ret;
> +
> + /*
> + * this SPI is shared by NIOS core inside FPGA, NIOS will use this SPI
> + * master to do some one time initialization after power up, and then
> + * release the control to OS. driver needs to poll on INIT_DONE to
> + * see when driver could take the control.
> + *
> + * Please note that after 3.x.x version, INIT_START is introduced, so
> + * driver needs to trigger START firstly and then check INIT_DONE.
> + */
> +
> + ret = n3000_nios_readl(ns, NIOS_FW_VERSION, &val);
> + if (ret)
> + return ret;
> +
> + /*
> + * If NIOS version register is totally uninitialized(== 0x0), then the
> + * NIOS firmware is missing. So host could take control of SPI master
> + * safely, but initialization work for NIOS is not done. This is an
> + * issue of FPGA image. We didn't error out because we need SPI
> master
> + * to reprogram a new image.
> + */
> + if (val == 0) {
> + dev_warn(dev, "NIOS version reg = 0x%x, skip INIT_DONE
> check, but PKVL may be uninitialized\n",
> + val);
> + return 0;
> + }
> +
> + if (FIELD_GET(NIOS_FW_VERSION_MAJOR, val) >= 3) {
> + /* read NIOS_INIT to check if PKVL INIT done or not */
> + ret = n3000_nios_readl(ns, NIOS_INIT, &val);
> + if (ret)
> + return ret;
> +
> + /* check if PKVLs are initialized already */
> + if (val & NIOS_INIT_DONE || val & NIOS_INIT_START)
> + goto nios_init_done;
> +
> + /* configure FEC mode per module param */
> + val = NIOS_INIT_START;
> +
> + /* FEC mode will be ignored by hardware in 10G mode */
> + if (!strcmp(fec_mode, "no"))
> + mode = REQ_FEC_MODE_NO;
> + else if (!strcmp(fec_mode, "kr"))
> + mode = REQ_FEC_MODE_KR;
> + else if (!strcmp(fec_mode, "rs"))
> + mode = REQ_FEC_MODE_RS;
> + else
> + return -EINVAL;
> +
> + /* set the same FEC mode for all links */
> + val |= FIELD_PREP(REQ_FEC_MODE_A0_MSK, mode) |
> + FIELD_PREP(REQ_FEC_MODE_A1_MSK, mode) |
> + FIELD_PREP(REQ_FEC_MODE_A2_MSK, mode) |
> + FIELD_PREP(REQ_FEC_MODE_A3_MSK, mode) |
> + FIELD_PREP(REQ_FEC_MODE_B0_MSK, mode) |
> + FIELD_PREP(REQ_FEC_MODE_B1_MSK, mode) |
> + FIELD_PREP(REQ_FEC_MODE_B2_MSK, mode) |
> + FIELD_PREP(REQ_FEC_MODE_B3_MSK, mode);
> +
> + ret = n3000_nios_writel(ns, NIOS_INIT, val);
> + if (ret)
> + return ret;
> + }
> +
> +nios_init_done:
> + /* polls on NIOS_INIT_DONE */
> + ret = regmap_read_poll_timeout(ns->regmap, NIOS_INIT, val,
> + val & NIOS_INIT_DONE,
> + NIOS_INIT_TIME_INTV,
> + NIOS_INIT_TIMEOUT);
> + if (ret) {
> + dev_err(dev, "NIOS_INIT_DONE %s\n",
> + (ret == -ETIMEDOUT) ? "timed out" : "check error");
> + goto dump_sts;
> + }
> +
> + /*
> + * after INIT_DONE is detected, it still needs to check if any ERR
> + * detected.
> + * We won't error out here even if error detected. Nios will release
> + * spi controller when INIT_DONE is set, so driver could continue to
> + * initialize spi controller device.
> + */
> + if (init_error_detected(ns)) {
> + dev_warn(dev, "NIOS_INIT_DONE OK, but err found during
> init\n");
> + goto dump_sts;
> + }
> + return 0;
> +
> +dump_sts:
> + dump_error_stat(ns);
> +
> + return ret;
> +}
> +
> +struct spi_board_info m10_n3000_info = {
> + .modalias = "m10-n3000",
> + .max_speed_hz = 12500000,
> + .bus_num = 0,
> + .chip_select = 0,
> +};
> +
> +static int create_altera_spi_controller(struct dfl_n3000_nios *ns)
> +{
> + struct altera_spi_platform_data pdata = { 0 };
> + struct platform_device_info pdevinfo = { 0 };
> + void __iomem *base = ns->base;
> + u64 v;
> +
> + v = readq(base + NIOS_SPI_PARAM);
> +
> + pdata.mode_bits = SPI_CS_HIGH;
> + if (FIELD_GET(PARAM_CLK_POL, v))
> + pdata.mode_bits |= SPI_CPOL;
> + if (FIELD_GET(PARAM_CLK_PHASE, v))
> + pdata.mode_bits |= SPI_CPHA;
> +
> + pdata.num_chipselect = FIELD_GET(PARAM_NUM_CS, v);
> + pdata.bits_per_word_mask =
> + SPI_BPW_RANGE_MASK(1, FIELD_GET(PARAM_DATA_WIDTH,
> v));
> +
> + pdata.num_devices = 1;
> + pdata.devices = &m10_n3000_info;
> +
> + dev_dbg(ns->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__,
> + pdata.num_chipselect, pdata.bits_per_word_mask,
> + pdata.mode_bits);
> +
> + pdevinfo.name = "subdev_spi_altera";
> + pdevinfo.id = PLATFORM_DEVID_AUTO;
> + pdevinfo.parent = ns->dev;
> + pdevinfo.data = &pdata;
> + pdevinfo.size_data = sizeof(pdata);
> +
> + ns->altera_spi = platform_device_register_full(&pdevinfo);
> + return PTR_ERR_OR_ZERO(ns->altera_spi);
> +}
> +
> +static void destroy_altera_spi_controller(struct dfl_n3000_nios *ns)
> +{
> + platform_device_unregister(ns->altera_spi);
> +}
> +
> +/* ns is the abbreviation of nios_spi */
> +static int ns_bus_poll_stat_timeout(void __iomem *base, u64 *v)
Why adding "bus" here? I just see it's polling on register bits, right?
It's a little confusing on ns_bus.
> +{
> + int loops = NS_REGBUS_WAIT_TIMEOUT;
> +
> + /*
> + * We don't use the time based timeout here for performance.
> + *
> + * The image reprograming engine is on max10 bmc chip, which is the
> spi
> + * device connected to altera spi controller. So the regbus read/write
> + * is on the critical path of PAC N3000 image reprograming. And
> usually
> + * the state changes in few loops, the time based timeout checking
> will
> + * add too much overhead on it.
> + *
> + * Anyway, 10000 times loop is large enough.
> + */
> + do {
> + *v = readq(base + NIOS_SPI_STAT);
> + if (*v & STAT_RW_VAL)
> + break;
> + cpu_relax();
> + } while (--loops);
> +
> + return loops ? 0 : -ETIMEDOUT;
> +}
> +
> +static int ns_bus_reg_write(void *context, unsigned int reg, unsigned int val)
> +{
> + void __iomem *base = context;
> + u64 v = 0;
> +
> + v |= FIELD_PREP(CTRL_CMD_MSK, CTRL_CMD_WR);
> + v |= FIELD_PREP(CTRL_ADDR, reg);
> + v |= FIELD_PREP(CTRL_WR_DATA, val);
> + writeq(v, base + NIOS_SPI_CTRL);
> +
> + return ns_bus_poll_stat_timeout(base, &v);
> +}
> +
> +static int ns_bus_reg_read(void *context, unsigned int reg, unsigned int *val)
> +{
> + void __iomem *base = context;
> + u64 v = 0;
> + int ret;
> +
> + v |= FIELD_PREP(CTRL_CMD_MSK, CTRL_CMD_RD);
> + v |= FIELD_PREP(CTRL_ADDR, reg);
> + writeq(v, base + NIOS_SPI_CTRL);
> +
> + ret = ns_bus_poll_stat_timeout(base, &v);
> + if (!ret)
> + *val = FIELD_GET(STAT_RD_DATA, v);
> +
> + return ret;
> +}
> +
> +static const struct regmap_config ns_regbus_cfg = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .fast_io = true,
> +
> + .reg_write = ns_bus_reg_write,
> + .reg_read = ns_bus_reg_read,
> +};
> +
> +static int dfl_n3000_nios_probe(struct dfl_device *dfl_dev)
> +{
> + struct device *dev = &dfl_dev->dev;
> + struct dfl_n3000_nios *ns;
> + int ret;
> +
> + ns = devm_kzalloc(dev, sizeof(*ns), GFP_KERNEL);
> + if (!ns)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&dfl_dev->dev, ns);
> +
> + ns->dev = dev;
> +
> + ns->base = devm_ioremap_resource(&dfl_dev->dev, &dfl_dev-
> >mmio_res);
> + if (IS_ERR(ns->base)) {
> + dev_err(dev, "get mem resource fail!\n");
devm_ioremap_resource should print some error message, will that be enough?
> + return PTR_ERR(ns->base);
> + }
> +
> + ns->regmap = devm_regmap_init(dev, NULL, ns->base,
> &ns_regbus_cfg);
> + if (IS_ERR(ns->regmap))
> + return PTR_ERR(ns->regmap);
> +
> + ret = n3000_nios_init_done_check(ns);
> + if (ret)
> + return ret;
> +
> + ret = create_altera_spi_controller(ns);
> + if (ret)
> + dev_err(dev, "altera spi controller create failed: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static void dfl_n3000_nios_remove(struct dfl_device *dfl_dev)
> +{
> + struct dfl_n3000_nios *ns = dev_get_drvdata(&dfl_dev->dev);
> +
> + destroy_altera_spi_controller(ns);
> +}
> +
> +#define FME_FEATURE_ID_N3000_NIOS 0xd
> +
> +static const struct dfl_device_id dfl_n3000_nios_ids[] = {
> + { FME_ID, FME_FEATURE_ID_N3000_NIOS },
> + { }
> +};
> +
> +static struct dfl_driver dfl_n3000_nios_driver = {
> + .drv = {
> + .name = "dfl-n3000-nios",
> + .dev_groups = n3000_nios_groups,
> + },
> + .id_table = dfl_n3000_nios_ids,
> + .probe = dfl_n3000_nios_probe,
> + .remove = dfl_n3000_nios_remove,
> +};
> +
> +module_dfl_driver(dfl_n3000_nios_driver);
> +
> +MODULE_DEVICE_TABLE(dfl, dfl_n3000_nios_ids);
> +MODULE_DESCRIPTION("DFL N3000 NIOS driver");
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
2020-08-04 12:56 ` Wu, Hao
@ 2020-08-05 8:35 ` Xu Yilun
2020-08-05 9:11 ` Wu, Hao
0 siblings, 1 reply; 18+ messages in thread
From: Xu Yilun @ 2020-08-05 8:35 UTC (permalink / raw)
To: Wu, Hao
Cc: mdf, linux-fpga, linux-kernel, trix, lgoncalv, Matthew Gerlach,
Weight, Russell H
Thanks for your quick response, I'm OK with most changes. Some comments
inline.
On Tue, Aug 04, 2020 at 08:56:12PM +0800, Wu, Hao wrote:
> > Subject: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
>
> > +#define NIOS_INIT0x1000
> > +#define NIOS_INIT_DONEBIT(0)
> > +#define NIOS_INIT_STARTBIT(1)
> > +/* Mode for PKVL A, link 0, the same below */
> > +#define REQ_FEC_MODE_A0_MSKGENMASK(9, 8)
> > +#define REQ_FEC_MODE_A1_MSKGENMASK(11, 10)
> > +#define REQ_FEC_MODE_A2_MSKGENMASK(13, 12)
> > +#define REQ_FEC_MODE_A3_MSKGENMASK(15, 14)
> > +#define REQ_FEC_MODE_B0_MSKGENMASK(17, 16)
> > +#define REQ_FEC_MODE_B1_MSKGENMASK(19, 18)
> > +#define REQ_FEC_MODE_B2_MSKGENMASK(21, 20)
> > +#define REQ_FEC_MODE_B3_MSKGENMASK(23, 22)
> > +#define REQ_FEC_MODE_NO0x0
> > +#define REQ_FEC_MODE_KR0x1
> > +#define REQ_FEC_MODE_RS0x2
>
> What does REQ mean?
It's the abbreviation of REQUEST, on spec these fields names
REQUEST_FEC_MODE_X_X
> > +/* ns is the abbreviation of nios_spi */
> > +static int ns_bus_poll_stat_timeout(void __iomem *base, u64 *v)
>
> Why adding "bus" here? I just see it's polling on register bits, right?
> It's a little confusing on ns_bus.
It is the polling for regmap read/write, the regmap is also called
regbus, so I name ns_bus here.
I could change the name, do you think there is confusing also for
ns_bus_reg_read & ns_bus_reg_write?
Thanks,
Yilun.
^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
2020-08-05 8:35 ` Xu Yilun
@ 2020-08-05 9:11 ` Wu, Hao
0 siblings, 0 replies; 18+ messages in thread
From: Wu, Hao @ 2020-08-05 9:11 UTC (permalink / raw)
To: Xu, Yilun
Cc: mdf, linux-fpga, linux-kernel, trix, lgoncalv, Matthew Gerlach,
Weight, Russell H
> Subject: Re: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private
> feature
>
> Thanks for your quick response, I'm OK with most changes. Some comments
> inline.
>
> On Tue, Aug 04, 2020 at 08:56:12PM +0800, Wu, Hao wrote:
> > > Subject: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private
> feature
> >
> > > +#define NIOS_INIT0x1000
> > > +#define NIOS_INIT_DONEBIT(0)
> > > +#define NIOS_INIT_STARTBIT(1)
> > > +/* Mode for PKVL A, link 0, the same below */
> > > +#define REQ_FEC_MODE_A0_MSKGENMASK(9, 8)
> > > +#define REQ_FEC_MODE_A1_MSKGENMASK(11, 10)
> > > +#define REQ_FEC_MODE_A2_MSKGENMASK(13, 12)
> > > +#define REQ_FEC_MODE_A3_MSKGENMASK(15, 14)
> > > +#define REQ_FEC_MODE_B0_MSKGENMASK(17, 16)
> > > +#define REQ_FEC_MODE_B1_MSKGENMASK(19, 18)
> > > +#define REQ_FEC_MODE_B2_MSKGENMASK(21, 20)
> > > +#define REQ_FEC_MODE_B3_MSKGENMASK(23, 22)
> > > +#define REQ_FEC_MODE_NO0x0
> > > +#define REQ_FEC_MODE_KR0x1
> > > +#define REQ_FEC_MODE_RS0x2
> >
> > What does REQ mean?
>
> It's the abbreviation of REQUEST, on spec these fields names
> REQUEST_FEC_MODE_X_X
Ok, got it.
>
> > > +/* ns is the abbreviation of nios_spi */
> > > +static int ns_bus_poll_stat_timeout(void __iomem *base, u64 *v)
> >
> > Why adding "bus" here? I just see it's polling on register bits, right?
> > It's a little confusing on ns_bus.
>
> It is the polling for regmap read/write, the regmap is also called
> regbus, so I name ns_bus here.
>
> I could change the name, do you think there is confusing also for
> ns_bus_reg_read & ns_bus_reg_write?
This regmap is only used to access the SPI master shared with Nios
core, right? If we compare nios_spi_bus_reg_read with
nios_spi_reg_read, I think nios_spi/ns_reg_read is better,
how do you think?
Thanks
Hao
>
> Thanks,
> Yilun.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
2020-08-04 7:05 ` [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature Xu Yilun
2020-08-04 12:56 ` Wu, Hao
@ 2020-08-04 18:45 ` Tom Rix
2020-08-05 8:36 ` Xu Yilun
1 sibling, 1 reply; 18+ messages in thread
From: Tom Rix @ 2020-08-04 18:45 UTC (permalink / raw)
To: Xu Yilun, mdf, linux-fpga, linux-kernel
Cc: lgoncalv, Wu Hao, Matthew Gerlach, Russ Weight
[-- Attachment #1: Type: text/plain, Size: 2090 bytes --]
Some minor edits.
I have added definitions for fec, kr, and rs.
Reviewed-by: Tom Rix <trix@redhat.com>
Tom
> --- /dev/null
> +++ b/Documentation/fpga/dfl-n3000-nios.rst
> @@ -0,0 +1,39 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=====================================
> +DFL N3000 Nios Private Feature Driver
> +=====================================
> +
> +The dfl n3000 nios driver supports for the nios handshake private feature on
> +Intel N3000 FPGA Card.
> +
> +This private feature provides a handshake interface to FPGA NIOS firmware,
> +which receives the ethernet retimer configuration command from host and
> +do the configuration via an internal SPI master. When nios finished the
does the configuration..
When nios finishes the ..
> +configuration, host takes over the ownership of the SPI master to control an
> +Intel MAX10 BMC Chip on the SPI bus.
> +
> +So the driver does 2 major tasks on probe, requires NIOS firmware to configure
, uses the NIOS firmware to configure the ethernet retimer, and then ..
> +the ethernet retimer by operating the handshake interfaces, and then creates a
> +spi master platform device with the MAX10 device info in spi_board_info.
> +
> +Module Parameters
> +=================
> +
> +The dfl n3000 nios driver supports the following module parameters:
> +
> +* fec_mode: string
> + Require the NIOS firmware to set the FEC mode of the ethernet retimer on
the FEC (Forward Error Correction) mode
> + the PAC N3000 FPGA card. The possible values could be:
> +
> + - "rs": RS FEC mode (default)
- "rs" : Reed Solomon FEC (default)
> + - "kr": KR FEC mode
- "kr": Fire Code FEC
> + - "no": NO FEC mode
> +
> + The configuration could only be set once after the board powers up, the
The configuration can only be ..
> + firmware will not accept a second configuration afterward. So the fec mode
second configuration.
> + will not be changed if the module is reloaded with a different param value.
> +
> + The configured value of the fec mode could be queried from sysfs node:
> +
> + /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
[-- Attachment #2: Type: text/html, Size: 4272 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 4/4] fpga: dfl: add support for N3000 nios private feature
2020-08-04 18:45 ` Tom Rix
@ 2020-08-05 8:36 ` Xu Yilun
0 siblings, 0 replies; 18+ messages in thread
From: Xu Yilun @ 2020-08-05 8:36 UTC (permalink / raw)
To: Tom Rix
Cc: mdf, linux-fpga, linux-kernel, lgoncalv, Wu Hao, Matthew Gerlach,
Russ Weight
Thanks for the word smith. I'll add these changes.
Thanks,
Yilun
On Tue, Aug 04, 2020 at 11:45:33AM -0700, Tom Rix wrote:
> Some minor edits.
>
> I have added definitions for fec, kr, and rs.
>
> Reviewed-by: Tom Rix <trix@redhat.com>
>
> Tom
>
> > --- /dev/null
> > +++ b/Documentation/fpga/dfl-n3000-nios.rst
> > @@ -0,0 +1,39 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +=====================================
> > +DFL N3000 Nios Private Feature Driver
> > +=====================================
> > +
> > +The dfl n3000 nios driver supports for the nios handshake private feature on
> > +Intel N3000 FPGA Card.
> > +
> > +This private feature provides a handshake interface to FPGA NIOS firmware,
> > +which receives the ethernet retimer configuration command from host and
> > +do the configuration via an internal SPI master. When nios finished the
>
> does the configuration..
>
> When nios finishes the ..
>
> > +configuration, host takes over the ownership of the SPI master to control an
> > +Intel MAX10 BMC Chip on the SPI bus.
> > +
> > +So the driver does 2 major tasks on probe, requires NIOS firmware to configure
> , uses the NIOS firmware to configure the ethernet retimer, and then ..
> > +the ethernet retimer by operating the handshake interfaces, and then creates a
> > +spi master platform device with the MAX10 device info in spi_board_info.
> > +
> > +Module Parameters
> > +=================
> > +
> > +The dfl n3000 nios driver supports the following module parameters:
> > +
> > +* fec_mode: string
> > + Require the NIOS firmware to set the FEC mode of the ethernet retimer on
> the FEC (Forward Error Correction) mode
> > + the PAC N3000 FPGA card. The possible values could be:
> > +
> > + - "rs": RS FEC mode (default)
> - "rs" : Reed Solomon FEC (default)
> > + - "kr": KR FEC mode
> - "kr": Fire Code FEC
> > + - "no": NO FEC mode
> > +
> > + The configuration could only be set once after the board powers up, the
> The configuration can only be ..
> > + firmware will not accept a second configuration afterward. So the fec mode
> second configuration.
> > + will not be changed if the module is reloaded with a different param value.
> > +
> > + The configured value of the fec mode could be queried from sysfs node:
> > +
> > + /sys/bus/dfl/devices/dfl-fme.X.X/fec_mode
^ permalink raw reply [flat|nested] 18+ messages in thread