Re: [dpdk-dev] [PATCH v7 1/3] ethdev: support L2TPv2 and PPP procotol

[Ori Kam <orika@nvidia.com>]

Hi Jie

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Wang, Jie1X
> Sent: Thursday, October 21, 2021 11:41 AM
> Subject: Re: [dpdk-dev] [PATCH v7 1/3] ethdev: support L2TPv2 and PPP procotol
> 
> 
> 
> > -----Original Message-----
> > From: Ori Kam <orika@nvidia.com>
> > Sent: Thursday, October 21, 2021 3:50 PM
> > To: Wang, Jie1X <jie1x.wang@intel.com>; dev@dpdk.org
> > Cc: Yigit, Ferruh <ferruh.yigit@intel.com>; NBU-Contact-Thomas Monjalon
> > <thomas@monjalon.net>; andrew.rybchenko@oktetlabs.ru; Li, Xiaoyun
> > <xiaoyun.li@intel.com>; Yang, SteveX <stevex.yang@intel.com>; Wu, Jingjing
> > <jingjing.wu@intel.com>; Xing, Beilei <beilei.xing@intel.com>; Wu, Wenjun1
> > <wenjun1.wu@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>
> > Subject: RE: [PATCH v7 1/3] ethdev: support L2TPv2 and PPP procotol
> >
> > Hi Jie,
> >
> > > -----Original Message-----
> > > From: Jie Wang <jie1x.wang@intel.com>
> > > Sent: Thursday, October 21, 2021 9:26 AM
> > > Subject: [PATCH v7 1/3] ethdev: support L2TPv2 and PPP procotol
> > >
> > > Added flow pattern items and header formats of L2TPv2 and PPP.
> > >
> > > Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
> > > Signed-off-by: Jie Wang <jie1x.wang@intel.com>
> > > ---
> > >  doc/api/doxy-api-index.md              |   2 +
> > >  doc/guides/nics/features/default.ini   |   2 +
> > >  doc/guides/nics/features/iavf.ini      |   2 +
> > >  doc/guides/prog_guide/rte_flow.rst     |  25 +++
> > >  doc/guides/rel_notes/release_21_11.rst |   4 +
> > >  lib/ethdev/rte_flow.c                  |   2 +
> > >  lib/ethdev/rte_flow.h                  |  65 +++++++
> > >  lib/net/meson.build                    |   2 +
> > >  lib/net/rte_l2tpv2.h                   | 234 +++++++++++++++++++++++++
> > >  lib/net/rte_ppp.h                      |  34 ++++
> > >  10 files changed, 372 insertions(+)
> > >  create mode 100644 lib/net/rte_l2tpv2.h  create mode 100644
> > > lib/net/rte_ppp.h
> > >
> > > diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
> > > index 1992107a03..42db196afe 100644
> > > --- a/doc/api/doxy-api-index.md
> > > +++ b/doc/api/doxy-api-index.md
> > > @@ -121,6 +121,8 @@ The public API headers are grouped by topics:
> > >    [VXLAN]              (@ref rte_vxlan.h),
> > >    [Geneve]             (@ref rte_geneve.h),
> > >    [eCPRI]              (@ref rte_ecpri.h)
> > > +  [L2TPv2]             (@ref rte_l2tpv2.h)
> > > +  [PPP]                (@ref rte_ppp.h)
> > >
> > >  - **QoS**:
> > >    [metering]           (@ref rte_meter.h),
> > > diff --git a/doc/guides/nics/features/default.ini
> > > b/doc/guides/nics/features/default.ini
> > > index 09914b1ad3..8e6a28c419 100644
> > > --- a/doc/guides/nics/features/default.ini
> > > +++ b/doc/guides/nics/features/default.ini
> > > @@ -110,6 +110,7 @@ ipv4                 =
> > >  ipv6                 =
> > >  ipv6_ext             =
> > >  ipv6_frag_ext        =
> > > +l2tpv2               =
> > >  l2tpv3oip            =
> > >  mark                 =
> > >  meta                 =
> > > @@ -121,6 +122,7 @@ pfcp                 =
> > >  phy_port             =
> > >  port_id              =
> > >  port_representor     =
> > > +ppp                  =
> > >  pppoed               =
> > >  pppoes               =
> > >  pppoe_proto_id       =
> > > diff --git a/doc/guides/nics/features/iavf.ini
> > > b/doc/guides/nics/features/iavf.ini
> > > index d00ca934c3..a916275b88 100644
> > > --- a/doc/guides/nics/features/iavf.ini
> > > +++ b/doc/guides/nics/features/iavf.ini
> > > @@ -50,8 +50,10 @@ icmp6                = Y
> > >  ipv4                 = Y
> > >  ipv6                 = Y
> > >  ipv6_frag_ext        = Y
> > > +l2tpv2               = Y
> > >  l2tpv3oip            = Y
> > >  pfcp                 = Y
> > > +ppp                  = Y
> > >  sctp                 = Y
> > >  tcp                  = Y
> > >  udp                  = Y
> > > diff --git a/doc/guides/prog_guide/rte_flow.rst
> > > b/doc/guides/prog_guide/rte_flow.rst
> > > index aeba374182..a2169517c3 100644
> > > --- a/doc/guides/prog_guide/rte_flow.rst
> > > +++ b/doc/guides/prog_guide/rte_flow.rst
> > > @@ -1573,6 +1573,31 @@ rte_flow_flex_item_create() routine.
> > >    as padded with trailing zeroes up to full configured length, both for
> > >    value and mask.
> > >
> > > +Item: ``L2TPV2``
> > > +^^^^^^^^^^^^^^^^^^^
> > > +
> > > +Matches a L2TPv2 header.
> > > +
> > > +- ``flags_version``: flags(12b), version(4b).
> > > +- ``length``: total length of the message.
> > > +- ``tunnel_id``: identifier for the control connection.
> > > +- ``session_id``: identifier for a session within a tunnel.
> > > +- ``ns``: sequence number for this date or control message.
> > > +- ``nr``: sequence number expected in the next control message to be
> > received.
> > > +- ``offset_size``: offset of payload data.
> > > +- ``offset_padding``: offset padding, variable length.
> > > +- Default ``mask`` matches flags_version only.
> > > +
> > > +Item: ``PPP``
> > > +^^^^^^^^^^^^^^^^^^^
> > > +
> > > +Matches a PPP header.
> > > +
> > > +- ``addr``: PPP address.
> > > +- ``ctrl``: PPP control.
> > > +- ``proto_id``: PPP protocol identifier.
> > > +- Default ``mask`` matches addr, ctrl, proto_id.
> > > +
> > >  Actions
> > >  ~~~~~~~
> > >
> > > diff --git a/doc/guides/rel_notes/release_21_11.rst
> > > b/doc/guides/rel_notes/release_21_11.rst
> > > index 041383ee2a..283770131c 100644
> > > --- a/doc/guides/rel_notes/release_21_11.rst
> > > +++ b/doc/guides/rel_notes/release_21_11.rst
> > > @@ -105,6 +105,10 @@ New Features
> > >
> > >    Added an ethdev API which can help users get device configuration.
> > >
> > > +* **Added L2TPv2 and PPP protocol support in rte_flow.**
> > > +
> > > +  Added flow pattern items and header formats of L2TPv2 and PPP protocol.
> > > +
> > >  * **Updated AF_XDP PMD.**
> > >
> > >    * Disabled secondary process support.
> > > diff --git a/lib/ethdev/rte_flow.c b/lib/ethdev/rte_flow.c index
> > > bcf0513b3c..d268784532 100644
> > > --- a/lib/ethdev/rte_flow.c
> > > +++ b/lib/ethdev/rte_flow.c
> > > @@ -156,6 +156,8 @@ static const struct rte_flow_desc_data
> > rte_flow_desc_item[] = {
> > >  	MK_FLOW_ITEM(REPRESENTED_PORT, sizeof(struct
> > rte_flow_item_ethdev)),
> > >  	MK_FLOW_ITEM_FN(FLEX, sizeof(struct rte_flow_item_flex),
> > >  			rte_flow_item_flex_conv),
> > > +	MK_FLOW_ITEM(L2TPV2, sizeof(struct rte_flow_item_l2tpv2)),
> > > +	MK_FLOW_ITEM(PPP, sizeof(struct rte_flow_item_ppp)),
> > >  };
> > >
> > >  /** Generate flow_action[] entry. */
> > > diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h index
> > > 64ed7f2618..300e99e16b 100644
> > > --- a/lib/ethdev/rte_flow.h
> > > +++ b/lib/ethdev/rte_flow.h
> > > @@ -35,6 +35,8 @@
> > >  #include <rte_mbuf_dyn.h>
> > >  #include <rte_meter.h>
> > >  #include <rte_gtp.h>
> > > +#include <rte_l2tpv2.h>
> > > +#include <rte_ppp.h>
> > >
> > >  #ifdef __cplusplus
> > >  extern "C" {
> > > @@ -644,6 +646,20 @@ enum rte_flow_item_type {
> > >  	 * @see struct rte_flow_item_flex.
> > >  	 */
> > >  	RTE_FLOW_ITEM_TYPE_FLEX,
> > > +
> > > +	/**
> > > +	 * Matches L2TPv2 Header.
> > > +	 *
> > > +	 * See struct rte_flow_item_l2tpv2.
> > > +	 */
> > > +	RTE_FLOW_ITEM_TYPE_L2TPV2,
> > > +
> > > +	/**
> > > +	 * Matches PPP Header.
> > > +	 *
> > > +	 * See struct rte_flow_item_ppp.
> > > +	 */
> > > +	RTE_FLOW_ITEM_TYPE_PPP,
> > >  };
> > >
> > >  /**
> > > @@ -1900,6 +1916,55 @@ static const struct rte_flow_item_ethdev
> > > rte_flow_item_ethdev_mask = {  };  #endif
> > >
> > > +/**
> > > + * @warning
> > > + * @b EXPERIMENTAL: this structure may change without prior notice
> > > + * RTE_FLOW_ITEM_TYPE_L2TPV2
> > > + *
> > > + * Matches L2TPv2 Header
> > > + */
> > > +struct rte_flow_item_l2tpv2 {
> > > +	struct rte_l2tpv2_combined_msg_hdr hdr; };
> > > +
> > > +/** Default mask for RTE_FLOW_ITEM_TYPE_L2TPV2. */ #ifndef
> > > +__cplusplus static const struct rte_flow_item_l2tpv2
> > > +rte_flow_item_l2tpv2_mask = {
> > > +	/*
> > > +	 * flags and version bit mask
> > > +	 * 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
> > > +	 * T L x x S x O P x x x x V V V V
> > > +	 */
> > > +	.hdr = {
> > > +		.common = {
> > > +			.flags_version = RTE_BE16(0xcb0f),
> > > +		},
> > > +	},
> > > +};
> > > +#endif
> > > +
> > > +/**
> > > + * @warning
> > > + * @b EXPERIMENTAL: this structure may change without prior notice
> > > + * RTE_FLOW_ITEM_TYPE_PPP
> > > + *
> > > + * Matches PPP Header
> > > + */
> > > +struct rte_flow_item_ppp {
> > > +	struct rte_ppp_hdr hdr;
> > > +};
> > > +
> > > +/** Default mask for RTE_FLOW_ITEM_TYPE_PPP. */ #ifndef __cplusplus
> > > +static const struct rte_flow_item_ppp rte_flow_item_ppp_mask = {
> > > +	.hdr = {
> > > +		.addr = 0xff,
> > > +		.ctrl = 0xff,
> > > +		.proto_id = RTE_BE16(0xffff),
> > > +	}
> > > +};
> > > +#endif
> > > +
> > >  /**
> > >   * Matching pattern item definition.
> > >   *
> > > diff --git a/lib/net/meson.build b/lib/net/meson.build index
> > > a4e395e9c5..e899846578 100644
> > > --- a/lib/net/meson.build
> > > +++ b/lib/net/meson.build
> > > @@ -19,6 +19,8 @@ headers = files(
> > >          'rte_higig.h',
> > >          'rte_ecpri.h',
> > >          'rte_geneve.h',
> > > +        'rte_l2tpv2.h',
> > > +        'rte_ppp.h',
> > >  )
> > >
> > >  sources = files(
> > > diff --git a/lib/net/rte_l2tpv2.h b/lib/net/rte_l2tpv2.h new file mode
> > > 100644 index 0000000000..18ea759ff4
> > > --- /dev/null
> > > +++ b/lib/net/rte_l2tpv2.h
> > > @@ -0,0 +1,234 @@
> > > +/* SPDX-License-Identifier: BSD-3-Clause
> > > + * Copyright 2021 Mellanox Technologies, Ltd  */
> > > +
> > > +#ifndef _RTE_L2TPV2_H_
> > > +#define _RTE_L2TPV2_H_
> > > +
> > > +/**
> > > + * @file
> > > + *
> > > + * L2TP header:
> > > + *
> > > + * `-0--------------------1----------------2-------------------3`
> > > + *
> > > + * `-0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1`
> > > + *
> > > + *
> > > +`+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+`
> > > + *
> > > + * `|T|L|x|x|S|x|O|P|x|x|x|x|--Ver--|-----------Length
> > > +(opt)--------|`
> > > + *
> > > + *
> > > +`+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+`
> > > + *
> > > + * `|-----------Tunnel ID-----------|-----------Session
> > > +ID----------|`
> > > + *
> > > + *
> > > +`+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+`
> > > + *
> > > + * `|-----------Ns (opt)------------|-----------Nr
> > > +(opt)------------|`
> > > + *
> > > + *
> > > +`+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+`
> > > + *
> > > + * `|---------Offset Size (opt)-----|---------Offset pad... (opt)`
> > > + *
> > > + *
> > > +`+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+`
> > > + *
> > > + * The Type (T) bit indicates the type of message. It is set to 0 for
> > > +a data
> > > + * message and 1 for a control message.
> > > + *
> > > + * If the Length (L) bit is 1, the Length field is present. This bit
> > > +MUST be
> > > + * set to 1 for control messages.
> > > + *
> > > + * The x bits are reserved for future extensions. All reserved bits
> > > +MUST
> > > + * be set to 0 on outgoing messages and ignored on incoming messages.
> > > + *
> > > + * If the Sequence (S) bit is set to 1 the Ns and Nr fields are present.
> > > + * The S bit MUST be set to 1 for control messages.
> > > + *
> > > + * If the Offset (O) bit is 1, the Offset Size field is present. The
> > > +O
> > > + * bit MUST be set to 0 for control messages.
> > > + *
> > > + * If the Priority (P) bit is 1, this data message should receive
> > > + * preferential treatment in its local queuing and transmission.
> > > + * The P bit MUST be set to 0 for control messages.
> > > + *
> > > + * Ver MUST be 2, indicating the version of the L2TP data message header.
> > > + *
> > > + * The Length field indicates the total length of the message in octets.
> > > + *
> > > + * Tunnel ID indicates the identifier for the control connection.
> > > + *
> > > + * Session ID indicates the identifier for a session within a tunnel.
> > > + *
> > > + * Ns indicates the sequence number for this data or control message.
> > > + *
> > > + * Nr indicates the sequence number expected in the next control
> > > +message
> > > + * to be received.
> > > + *
> > > + * The Offset Size field, if present, specifies the number of octets
> > > + * past the L2TP header at which the payload data is expected to start.
> > > + * Actual data within the offset padding is undefined. If the offset
> > > + * field is present, the L2TP header ends after the last octet of the
> > > + * offset padding.
> > > + */
> > > +
> > > +#include <stdint.h>
> > > +#include <rte_byteorder.h>
> > > +
> > > +#ifdef __cplusplus
> > > +extern "C" {
> > > +#endif
> > > +
> > > +/**
> > > + * L2TPv2 Common Header
> > > + */
> > > +RTE_STD_C11
> > > +struct rte_l2tpv2_common_hdr {
> > > +	union {
> > > +		/** header flags and protocol version */
> > > +		rte_be16_t flags_version;
> > > +		struct {
> > > +#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
> > > +			rte_be16_t t:1;		/**< message Type */
> > > +			rte_be16_t l:1;		/**< length option bit */
> > > +			rte_be16_t res1:2;	/**< reserved */
> > > +			rte_be16_t s:1;		/**< ns/nr option bit */
> > > +			rte_be16_t res2:1;	/**< reserved */
> > > +			rte_be16_t o:1;		/**< offset option bit */
> > > +			rte_be16_t p:1;		/**< priority option bit */
> > > +			rte_be16_t res3:4;	/**< reserved */
> > > +			rte_be16_t ver:4;	/**< protocol version */
> > > +#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> > > +			rte_be16_t ver:4;	/**< protocol version */
> > > +			rte_be16_t res3:4;	/**< reserved */
> > > +			rte_be16_t p:1;		/**< priority option bit */
> > > +			rte_be16_t o:1;		/**< offset option bit */
> > > +			rte_be16_t res2:1;	/**< reserved */
> > > +			rte_be16_t s:1;		/**< ns/nr option bit */
> > > +			rte_be16_t res1:2;	/**< reserved */
> > > +			rte_be16_t l:1;		/**< length option bit */
> > > +			rte_be16_t t:1;		/**< message Type */
> > > +#endif
> > > +		};
> > > +	};
> > > +};
> > > +
> > > +/**
> > > + * L2TPv2 message Header contains all options(length, ns, nr,
> > > + * offset size, offset padding).
> > > + */
> > > +struct rte_l2tpv2_msg_with_all_options {
> > > +	rte_be16_t length;		/**< length(16) */
> > > +	rte_be16_t tunnel_id;		/**< tunnel ID(16) */
> > > +	rte_be16_t session_id;		/**< session ID(16) */
> > > +	rte_be16_t ns;			/**< Ns(16) */
> > > +	rte_be16_t nr;			/**< Nr(16) */
> > > +	rte_be16_t offset_size;		/**< offset size(16) */
> > > +	uint8_t   *offset_padding;	/**< offset padding(variable length) */
> > > +};
> > > +
> > > +/**
> > > + * L2TPv2 message Header contains all options except length(ns, nr,
> > > + * offset size, offset padding).
> > > + */
> > > +struct rte_l2tpv2_msg_without_length {
> > > +	rte_be16_t tunnel_id;		/**< tunnel ID(16) */
> > > +	rte_be16_t session_id;		/**< session ID(16) */
> > > +	rte_be16_t ns;			/**< Ns(16) */
> > > +	rte_be16_t nr;			/**< Nr(16) */
> > > +	rte_be16_t offset_size;		/**< offset size(16) */
> > > +	uint8_t   *offset_padding;	/**< offset padding(variable length) */
> > > +};
> > > +
> > > +/**
> > > + * L2TPv2 message Header contains all options except ns_nr(length,
> > > + * offset size, offset padding).
> > > + * Ns and Nr MUST be toghter.
> > > + */
> > > +struct rte_l2tpv2_msg_without_ns_nr {
> > > +	rte_be16_t length;		/**< length(16) */
> > > +	rte_be16_t tunnel_id;		/**< tunnel ID(16) */
> > > +	rte_be16_t session_id;		/**< session ID(16) */
> > > +	rte_be16_t offset_size;		/**< offset size(16) */
> > > +	uint8_t   *offset_padding;	/**< offset padding(variable length) */
> > > +};
> > > +
> > > +/**
> > > + * L2TPv2 message Header contains all options except ns_nr(length, ns, nr).
> > > + * offset size and offset padding MUST be toghter.
> > > + */
> > > +struct rte_l2tpv2_msg_without_offset {
> > > +	rte_be16_t length;		/**< length(16) */
> > > +	rte_be16_t tunnel_id;		/**< tunnel ID(16) */
> > > +	rte_be16_t session_id;		/**< session ID(16) */
> > > +	rte_be16_t ns;			/**< Ns(16) */
> > > +	rte_be16_t nr;			/**< Nr(16) */
> > > +};
> >
> > Why not packed?
> >
> > > +
> > > +/**
> > > + * L2TPv2 message Header contains options offset size and offset padding.
> > > + */
> > > +struct rte_l2tpv2_msg_with_offset {
> > > +	rte_be16_t tunnel_id;		/**< tunnel ID(16) */
> > > +	rte_be16_t session_id;		/**< session ID(16) */
> > > +	rte_be16_t offset_size;		/**< offset size(16) */
> > > +	uint8_t   *offset_padding;	/**< offset padding(variable length) */
> > > +};
> > > +
> > > +/**
> > > + * L2TPv2 message Header contains options ns and nr.
> > > + */
> > > +struct rte_l2tpv2_msg_with_ns_nr {
> > > +	rte_be16_t tunnel_id;		/**< tunnel ID(16) */
> > > +	rte_be16_t session_id;		/**< session ID(16) */
> > > +	rte_be16_t ns;			/**< Ns(16) */
> > > +	rte_be16_t nr;			/**< Nr(16) */
> > > +};
> >
> > Why not packed? Same for all structs.
> >
> >
> Hi Ori,
> 
> Do you mean I should pack Ns/Nr into a structure as a field? And pack offset size/offset padding into
> another structure?
> 

I mean all the structures are defining protocols so I think they should be in packet format,
just like most of other protocol and even the ppp protocol.

> > > +
> > > +/**
> > > + * L2TPv2 message Header contains option length.
> > > + */
> > > +struct rte_l2tpv2_msg_with_length {
> > > +	rte_be16_t length;		/**< length(16) */
> > > +	rte_be16_t tunnel_id;		/**< tunnel ID(16) */
> > > +	rte_be16_t session_id;		/**< session ID(16) */
> > > +};
> > > +
> > > +/**
> > > + * L2TPv2 message Header without all options.
> > > + */
> > > +struct rte_l2tpv2_msg_without_all_options {
> > > +	rte_be16_t tunnel_id;		/**< tunnel ID(16) */
> > > +	rte_be16_t session_id;		/**< session ID(16) */
> > > +};
> > > +
> > > +/**
> > > + * L2TPv2 Combined Message Header Format: Common Header + Options  */
> > > +RTE_STD_C11
> > > +struct rte_l2tpv2_combined_msg_hdr {
> > > +	struct rte_l2tpv2_common_hdr common; /**< common header */
> > > +	union {
> > > +		/** header with all options */
> > > +		struct rte_l2tpv2_msg_with_all_options type0;
> > > +		/** header with all options except length */
> > > +		struct rte_l2tpv2_msg_without_length type1;
> > > +		/** header with all options except ns/nr */
> > > +		struct rte_l2tpv2_msg_without_ns_nr type2;
> > > +		/** header with all options except offset */
> > > +		struct rte_l2tpv2_msg_without_offset type3;
> > > +		/** header with offset options */
> > > +		struct rte_l2tpv2_msg_with_offset type4;
> > > +		/** header with ns/nr options */
> > > +		struct rte_l2tpv2_msg_with_ns_nr type5;
> > > +		/** header with length option */
> > > +		struct rte_l2tpv2_msg_with_length type6;
> > > +		/** header without all options */
> > > +		struct rte_l2tpv2_msg_without_all_options type7;
> > > +	};
> > > +};
> > > +
> > > +#ifdef __cplusplus
> > > +}
> > > +#endif
> > > +
> > > +#endif /* _RTE_L2TPV2_H_ */
> > > diff --git a/lib/net/rte_ppp.h b/lib/net/rte_ppp.h new file mode
> > > 100644 index 0000000000..2a53cd969f
> > > --- /dev/null
> > > +++ b/lib/net/rte_ppp.h
> > > @@ -0,0 +1,34 @@
> > > +/* SPDX-License-Identifier: BSD-3-Clause
> > > + * Copyright 2021 Mellanox Technologies, Ltd  */
> > > +
> > > +#ifndef _RTE_PPP_H_
> > > +#define _RTE_PPP_H_
> > > +
> > > +/**
> > > + * @file
> > > + *
> > > + * PPP headers definition.
> > > + */
> > > +
> > > +#include <stdint.h>
> > > +#include <rte_byteorder.h>
> > > +
> > > +#ifdef __cplusplus
> > > +extern "C" {
> > > +#endif
> > > +
> > > +/**
> > > + * PPP Header
> > > + */
> > > +struct rte_ppp_hdr {
> > > +	uint8_t addr; /**< PPP address(8) */
> > > +	uint8_t ctrl; /**< PPP control(8) */
> > > +	rte_be16_t proto_id; /**< PPP protocol identifier(16) */ }
> > > +__rte_packed;
> > > +
> > > +#ifdef __cplusplus
> > > +}
> > > +#endif
> > > +
> > > +#endif /* _RTE_PPP_H_ */
> > > --
> > > 2.25.1
> >
> > Best,
> > Ori