* [PATCH] crypto/aesni_mb: add DES support
@ 2017-08-18 6:17 Pablo de Lara
2017-09-04 9:07 ` Zhang, Roy Fan
2017-09-15 2:09 ` [PATCH v2 0/3] Extend " Pablo de Lara
0 siblings, 2 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-08-18 6:17 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara
The Multi-buffer library now supports DES-CBC
and DES-DOCSISBPI algorithms, so this commit
extends adds support for them in the PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
doc/guides/cryptodevs/aesni_mb.rst | 2 +
doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
doc/guides/rel_notes/release_17_11.rst | 7 +++
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 74 ++++++++++++++++++++---------
test/test/test_cryptodev.c | 42 ++++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 42 ++++++++++------
6 files changed, 133 insertions(+), 37 deletions(-)
diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst
index b3b937f..2e07e1e 100644
--- a/doc/guides/cryptodevs/aesni_mb.rst
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -52,6 +52,8 @@ Cipher algorithms:
* RTE_CRYPTO_CIPHER_AES192_CTR
* RTE_CRYPTO_CIPHER_AES256_CTR
* RTE_CRYPTO_CIPHER_AES_DOCSISBPI
+* RTE_CRYPTO_CIPHER_DES_CBC
+* RTE_CRYPTO_CIPHER_DES_DOCSISBPI
Hash algorithms:
diff --git a/doc/guides/cryptodevs/features/aesni_mb.ini b/doc/guides/cryptodevs/features/aesni_mb.ini
index 03d8485..fab07cb 100644
--- a/doc/guides/cryptodevs/features/aesni_mb.ini
+++ b/doc/guides/cryptodevs/features/aesni_mb.ini
@@ -23,6 +23,9 @@ AES CTR (128) = Y
AES CTR (192) = Y
AES CTR (256) = Y
AES DOCSIS BPI = Y
+DES CBC = Y
+DES DOCSIS BPI = Y
+
;
; Supported authentication algorithms of the 'aesni_mb' crypto driver.
;
diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst
index 170f4f9..134477f 100644
--- a/doc/guides/rel_notes/release_17_11.rst
+++ b/doc/guides/rel_notes/release_17_11.rst
@@ -41,6 +41,13 @@ New Features
Also, make sure to start the actual text at the margin.
=========================================================
+* **Updated the AESNI MB PMD.**
+
+ The AESNI MB PMD has been updated with additional support for:
+
+ * DES CBC algorithm.
+ * DES DOCSIS BPI algorithm.
+
Resolved Issues
---------------
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
index 16e1451..ca25e28 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -30,6 +30,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <des.h>
+
#include <rte_common.h>
#include <rte_hexdump.h>
#include <rte_cryptodev.h>
@@ -188,6 +190,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
struct aesni_mb_session *sess,
const struct rte_crypto_sym_xform *xform)
{
+ uint8_t is_aes;
aes_keyexp_t aes_keyexp_fn;
if (xform == NULL) {
@@ -217,45 +220,70 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
switch (xform->cipher.algo) {
case RTE_CRYPTO_CIPHER_AES_CBC:
sess->cipher.mode = CBC;
+ is_aes = 1;
break;
case RTE_CRYPTO_CIPHER_AES_CTR:
sess->cipher.mode = CNTR;
+ is_aes = 1;
break;
case RTE_CRYPTO_CIPHER_AES_DOCSISBPI:
sess->cipher.mode = DOCSIS_SEC_BPI;
+ is_aes = 1;
break;
- default:
- MB_LOG_ERR("Unsupported cipher mode parameter");
- return -ENOTSUP;
- }
-
- /* Check key length and choose key expansion function */
- switch (xform->cipher.key.length) {
- case AES_128_BYTES:
- sess->cipher.key_length_in_bytes = AES_128_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+ case RTE_CRYPTO_CIPHER_DES_CBC:
+ sess->cipher.mode = DES;
+ is_aes = 0;
break;
- case AES_192_BYTES:
- sess->cipher.key_length_in_bytes = AES_192_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
- break;
- case AES_256_BYTES:
- sess->cipher.key_length_in_bytes = AES_256_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+ case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
+ sess->cipher.mode = DOCSIS_DES;
+ is_aes = 0;
break;
default:
- MB_LOG_ERR("Invalid cipher key length");
- return -EINVAL;
+ MB_LOG_ERR("Unsupported cipher mode parameter");
+ return -ENOTSUP;
}
/* Set IV parameters */
sess->iv.offset = xform->cipher.iv.offset;
sess->iv.length = xform->cipher.iv.length;
- /* Expanded cipher keys */
- (*aes_keyexp_fn)(xform->cipher.key.data,
- sess->cipher.expanded_aes_keys.encode,
- sess->cipher.expanded_aes_keys.decode);
+ /* Check key length and choose key expansion function for AES */
+ if (is_aes) {
+ switch (xform->cipher.key.length) {
+ case AES_128_BYTES:
+ sess->cipher.key_length_in_bytes = AES_128_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+ break;
+ case AES_192_BYTES:
+ sess->cipher.key_length_in_bytes = AES_192_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
+ break;
+ case AES_256_BYTES:
+ sess->cipher.key_length_in_bytes = AES_256_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+ break;
+ default:
+ MB_LOG_ERR("Invalid cipher key length");
+ return -EINVAL;
+ }
+
+ /* Expanded cipher keys */
+ (*aes_keyexp_fn)(xform->cipher.key.data,
+ sess->cipher.expanded_aes_keys.encode,
+ sess->cipher.expanded_aes_keys.decode);
+
+ } else {
+ if (xform->cipher.key.length != 8) {
+ MB_LOG_ERR("Invalid cipher key length");
+ return -EINVAL;
+ }
+ sess->cipher.key_length_in_bytes = 8;
+
+ des_key_schedule((uint64_t *)sess->cipher.expanded_aes_keys.encode,
+ xform->cipher.key.data);
+ des_key_schedule((uint64_t *)sess->cipher.expanded_aes_keys.decode,
+ xform->cipher.key.data);
+ }
return 0;
}
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index a4116c6..c282f4d 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -4691,6 +4691,44 @@ test_DES_docsis_openssl_all(void)
}
static int
+test_DES_cipheronly_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)),
+ BLKCIPHER_DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_DES_docsis_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)),
+ BLKCIPHER_DES_DOCSIS_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_3DES_chain_dpaa2_sec_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -8289,6 +8327,10 @@ static struct unit_test_suite cryptodev_aesni_mb_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_cipheronly_mb_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_docsis_mb_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_authonly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_cipheronly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_docsis_mb_all),
TEST_CASES_END() /**< NULL terminate unit test array */
}
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index 0b6e0b8..14123d7 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -851,13 +851,15 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.test_descr = "DES-CBC Encryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-CBC Decryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
};
@@ -965,42 +967,48 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.test_data = &des_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Runt Block Encryption",
.test_data = &des_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Uneven Encryption",
.test_data = &des_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Full Block Decryption",
.test_data = &des_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Runt Block Decryption",
.test_data = &des_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Uneven Decryption",
.test_data = &des_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Full Block Encryption",
@@ -1008,7 +1016,8 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Runt Block Encryption",
@@ -1016,7 +1025,8 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Uneven Encryption",
@@ -1024,7 +1034,8 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Full Block Decryption",
@@ -1032,7 +1043,8 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Runt Block Decryption",
@@ -1040,7 +1052,8 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Uneven Decryption",
@@ -1048,7 +1061,8 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
}
};
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH] crypto/aesni_mb: add DES support
2017-08-18 6:17 [PATCH] crypto/aesni_mb: add DES support Pablo de Lara
@ 2017-09-04 9:07 ` Zhang, Roy Fan
2017-09-15 2:09 ` [PATCH v2 0/3] Extend " Pablo de Lara
1 sibling, 0 replies; 21+ messages in thread
From: Zhang, Roy Fan @ 2017-09-04 9:07 UTC (permalink / raw)
To: De Lara Guarch, Pablo, Doherty, Declan; +Cc: dev, Zhang, Roy Fan
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Pablo de Lara
> Sent: Friday, August 18, 2017 7:18 AM
> To: Doherty, Declan <declan.doherty@intel.com>
> Cc: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
> Subject: [dpdk-dev] [PATCH] crypto/aesni_mb: add DES support
>
> The Multi-buffer library now supports DES-CBC and DES-DOCSISBPI
> algorithms, so this commit extends adds support for them in the PMD.
>
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 0/3] Extend DES support
2017-08-18 6:17 [PATCH] crypto/aesni_mb: add DES support Pablo de Lara
2017-09-04 9:07 ` Zhang, Roy Fan
@ 2017-09-15 2:09 ` Pablo de Lara
2017-09-15 2:09 ` [PATCH v2 1/3] crypto/aesni_mb: add " Pablo de Lara
` (3 more replies)
1 sibling, 4 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-09-15 2:09 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara
This patchset extends the support of DES algorithms
to the AESNI MB and OpenSSL PMDs.
For AESNI MB PMD, the following algorithms are added:
- DES-CBC
- DES-DOCSISBPI
For OpenSSL PMD, DES-CBC is added, as DES-DOCSISBPI
was already supported.
Changes in v2:
- Added support for DES-CBC in OpenSSL PMD
- Added missing capabilities for AESNI MB PMD
- Fixed issue in crypto-perf app
Pablo de Lara (3):
crypto/aesni_mb: add DES support
crypto/openssl: add support for DES-CBC
app/crypto-perf: fix packet length check
app/test-crypto-perf/cperf_options_parsing.c | 18 +++++--
doc/guides/cryptodevs/aesni_mb.rst | 2 +
doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
doc/guides/rel_notes/release_17_11.rst | 7 +++
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 74 ++++++++++++++++++--------
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42 +++++++++++++++
drivers/crypto/openssl/rte_openssl_pmd.c | 27 ++++++++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 20 +++++++
test/test/test_cryptodev.c | 63 ++++++++++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 26 ++++++---
10 files changed, 248 insertions(+), 34 deletions(-)
--
2.9.4
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v2 1/3] crypto/aesni_mb: add DES support
2017-09-15 2:09 ` [PATCH v2 0/3] Extend " Pablo de Lara
@ 2017-09-15 2:09 ` Pablo de Lara
2017-09-18 10:56 ` Radu Nicolau
2017-09-15 2:09 ` [PATCH v2 2/3] crypto/openssl: add support for DES-CBC Pablo de Lara
` (2 subsequent siblings)
3 siblings, 1 reply; 21+ messages in thread
From: Pablo de Lara @ 2017-09-15 2:09 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara
The Multi-buffer library now supports DES-CBC
and DES-DOCSISBPI algorithms, so this commit
extends adds support for them in the PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
---
doc/guides/cryptodevs/aesni_mb.rst | 2 +
doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
doc/guides/rel_notes/release_17_11.rst | 7 +++
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 74 ++++++++++++++++++--------
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42 +++++++++++++++
test/test/test_cryptodev.c | 42 +++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 24 ++++++---
7 files changed, 163 insertions(+), 31 deletions(-)
diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst
index b3b937f..2e07e1e 100644
--- a/doc/guides/cryptodevs/aesni_mb.rst
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -52,6 +52,8 @@ Cipher algorithms:
* RTE_CRYPTO_CIPHER_AES192_CTR
* RTE_CRYPTO_CIPHER_AES256_CTR
* RTE_CRYPTO_CIPHER_AES_DOCSISBPI
+* RTE_CRYPTO_CIPHER_DES_CBC
+* RTE_CRYPTO_CIPHER_DES_DOCSISBPI
Hash algorithms:
diff --git a/doc/guides/cryptodevs/features/aesni_mb.ini b/doc/guides/cryptodevs/features/aesni_mb.ini
index 03d8485..fab07cb 100644
--- a/doc/guides/cryptodevs/features/aesni_mb.ini
+++ b/doc/guides/cryptodevs/features/aesni_mb.ini
@@ -23,6 +23,9 @@ AES CTR (128) = Y
AES CTR (192) = Y
AES CTR (256) = Y
AES DOCSIS BPI = Y
+DES CBC = Y
+DES DOCSIS BPI = Y
+
;
; Supported authentication algorithms of the 'aesni_mb' crypto driver.
;
diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst
index cdb99f4..800f07e 100644
--- a/doc/guides/rel_notes/release_17_11.rst
+++ b/doc/guides/rel_notes/release_17_11.rst
@@ -41,6 +41,13 @@ New Features
Also, make sure to start the actual text at the margin.
=========================================================
+* **Updated the AESNI MB PMD.**
+
+ The AESNI MB PMD has been updated with additional support for:
+
+ * DES CBC algorithm.
+ * DES DOCSIS BPI algorithm.
+
Resolved Issues
---------------
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
index f91504d..1e93038 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -30,6 +30,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <des.h>
+
#include <rte_common.h>
#include <rte_hexdump.h>
#include <rte_cryptodev.h>
@@ -188,6 +190,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
struct aesni_mb_session *sess,
const struct rte_crypto_sym_xform *xform)
{
+ uint8_t is_aes;
aes_keyexp_t aes_keyexp_fn;
if (xform == NULL) {
@@ -217,45 +220,70 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
switch (xform->cipher.algo) {
case RTE_CRYPTO_CIPHER_AES_CBC:
sess->cipher.mode = CBC;
+ is_aes = 1;
break;
case RTE_CRYPTO_CIPHER_AES_CTR:
sess->cipher.mode = CNTR;
+ is_aes = 1;
break;
case RTE_CRYPTO_CIPHER_AES_DOCSISBPI:
sess->cipher.mode = DOCSIS_SEC_BPI;
+ is_aes = 1;
break;
- default:
- MB_LOG_ERR("Unsupported cipher mode parameter");
- return -ENOTSUP;
- }
-
- /* Check key length and choose key expansion function */
- switch (xform->cipher.key.length) {
- case AES_128_BYTES:
- sess->cipher.key_length_in_bytes = AES_128_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+ case RTE_CRYPTO_CIPHER_DES_CBC:
+ sess->cipher.mode = DES;
+ is_aes = 0;
break;
- case AES_192_BYTES:
- sess->cipher.key_length_in_bytes = AES_192_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
- break;
- case AES_256_BYTES:
- sess->cipher.key_length_in_bytes = AES_256_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+ case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
+ sess->cipher.mode = DOCSIS_DES;
+ is_aes = 0;
break;
default:
- MB_LOG_ERR("Invalid cipher key length");
- return -EINVAL;
+ MB_LOG_ERR("Unsupported cipher mode parameter");
+ return -ENOTSUP;
}
/* Set IV parameters */
sess->iv.offset = xform->cipher.iv.offset;
sess->iv.length = xform->cipher.iv.length;
- /* Expanded cipher keys */
- (*aes_keyexp_fn)(xform->cipher.key.data,
- sess->cipher.expanded_aes_keys.encode,
- sess->cipher.expanded_aes_keys.decode);
+ /* Check key length and choose key expansion function for AES */
+ if (is_aes) {
+ switch (xform->cipher.key.length) {
+ case AES_128_BYTES:
+ sess->cipher.key_length_in_bytes = AES_128_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+ break;
+ case AES_192_BYTES:
+ sess->cipher.key_length_in_bytes = AES_192_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
+ break;
+ case AES_256_BYTES:
+ sess->cipher.key_length_in_bytes = AES_256_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+ break;
+ default:
+ MB_LOG_ERR("Invalid cipher key length");
+ return -EINVAL;
+ }
+
+ /* Expanded cipher keys */
+ (*aes_keyexp_fn)(xform->cipher.key.data,
+ sess->cipher.expanded_aes_keys.encode,
+ sess->cipher.expanded_aes_keys.decode);
+
+ } else {
+ if (xform->cipher.key.length != 8) {
+ MB_LOG_ERR("Invalid cipher key length");
+ return -EINVAL;
+ }
+ sess->cipher.key_length_in_bytes = 8;
+
+ des_key_schedule((uint64_t *)sess->cipher.expanded_aes_keys.encode,
+ xform->cipher.key.data);
+ des_key_schedule((uint64_t *)sess->cipher.expanded_aes_keys.decode,
+ xform->cipher.key.data);
+ }
return 0;
}
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
index 4be9b80..2e52ac2 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
@@ -247,6 +247,48 @@ static const struct rte_cryptodev_capabilities aesni_mb_pmd_capabilities[] = {
}, }
}, }
},
+ { /* DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* DES DOCSIS BPI */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_DOCSISBPI,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+
RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
};
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index a4116c6..c282f4d 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -4691,6 +4691,44 @@ test_DES_docsis_openssl_all(void)
}
static int
+test_DES_cipheronly_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)),
+ BLKCIPHER_DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_DES_docsis_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)),
+ BLKCIPHER_DES_DOCSIS_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_3DES_chain_dpaa2_sec_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -8289,6 +8327,10 @@ static struct unit_test_suite cryptodev_aesni_mb_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_cipheronly_mb_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_docsis_mb_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_authonly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_cipheronly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_docsis_mb_all),
TEST_CASES_END() /**< NULL terminate unit test array */
}
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index 0b6e0b8..9bb3618 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -851,13 +851,15 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.test_descr = "DES-CBC Encryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-CBC Decryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
};
@@ -965,42 +967,48 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.test_data = &des_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Runt Block Encryption",
.test_data = &des_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Uneven Encryption",
.test_data = &des_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Full Block Decryption",
.test_data = &des_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Runt Block Decryption",
.test_data = &des_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Uneven Decryption",
.test_data = &des_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Full Block Encryption",
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v2 1/3] crypto/aesni_mb: add DES support
2017-09-15 2:09 ` [PATCH v2 1/3] crypto/aesni_mb: add " Pablo de Lara
@ 2017-09-18 10:56 ` Radu Nicolau
2017-09-18 14:08 ` De Lara Guarch, Pablo
0 siblings, 1 reply; 21+ messages in thread
From: Radu Nicolau @ 2017-09-18 10:56 UTC (permalink / raw)
To: Pablo de Lara, declan.doherty; +Cc: dev
On 9/15/2017 3:09 AM, Pablo de Lara wrote:
> The Multi-buffer library now supports DES-CBC
> and DES-DOCSISBPI algorithms, so this commit
> extends adds support for them in the PMD.
>
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
> ---
> doc/guides/cryptodevs/aesni_mb.rst | 2 +
> doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
> doc/guides/rel_notes/release_17_11.rst | 7 +++
> drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 74 ++++++++++++++++++--------
> drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42 +++++++++++++++
> test/test/test_cryptodev.c | 42 +++++++++++++++
> test/test/test_cryptodev_des_test_vectors.h | 24 ++++++---
> 7 files changed, 163 insertions(+), 31 deletions(-)
>
> <snip>
>
> +#include <des.h>
> +
> #include <rte_common.h>
> #include <rte_hexdump.h>
> #include <rte_cryptodev.h>
> @@ -188,6 +190,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
> struct aesni_mb_session *sess,
> const struct rte_crypto_sym_xform *xform)
> {
> + uint8_t is_aes;
Nitpicking: Maybe initialize with zero and remove is_aes = 0; from the
switch body?
> aes_keyexp_t aes_keyexp_fn;
>
> if (xform == NULL) {
> @@ -217,45 +220,70 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
> switch (xform->cipher.algo) {
> case RTE_CRYPTO_CIPHER_AES_CBC:
> sess->cipher.mode = CBC;
> + is_aes = 1;
> break;
> case RTE_CRYPTO_CIPHER_AES_CTR:
> sess->cipher.mode = CNTR;
> + is_aes = 1;
> break;
> case RTE_CRYPTO_CIPHER_AES_DOCSISBPI:
> sess->cipher.mode = DOCSIS_SEC_BPI;
> + is_aes = 1;
> break;
> - default:
> - MB_LOG_ERR("Unsupported cipher mode parameter");
> - return -ENOTSUP;
> - }
> -
> - /* Check key length and choose key expansion function */
> - switch (xform->cipher.key.length) {
> - case AES_128_BYTES:
> - sess->cipher.key_length_in_bytes = AES_128_BYTES;
> - aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
> + case RTE_CRYPTO_CIPHER_DES_CBC:
> + sess->cipher.mode = DES;
> + is_aes = 0;
> break;
> - case AES_192_BYTES:
> - sess->cipher.key_length_in_bytes = AES_192_BYTES;
> - aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
> - break;
> - case AES_256_BYTES:
> - sess->cipher.key_length_in_bytes = AES_256_BYTES;
> - aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
> + case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
> + sess->cipher.mode = DOCSIS_DES;
> + is_aes = 0;
> break;
> default:
> - MB_LOG_ERR("Invalid cipher key length");
> - return -EINVAL;
> + MB_LOG_ERR("Unsupported cipher mode parameter");
> + return -ENOTSUP;
> }
> <snip>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v2 1/3] crypto/aesni_mb: add DES support
2017-09-18 10:56 ` Radu Nicolau
@ 2017-09-18 14:08 ` De Lara Guarch, Pablo
0 siblings, 0 replies; 21+ messages in thread
From: De Lara Guarch, Pablo @ 2017-09-18 14:08 UTC (permalink / raw)
To: Nicolau, Radu, Doherty, Declan; +Cc: dev
> -----Original Message-----
> From: Nicolau, Radu
> Sent: Monday, September 18, 2017 11:56 AM
> To: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; Doherty,
> Declan <declan.doherty@intel.com>
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v2 1/3] crypto/aesni_mb: add DES support
>
>
>
> On 9/15/2017 3:09 AM, Pablo de Lara wrote:
> > The Multi-buffer library now supports DES-CBC and DES-DOCSISBPI
> > algorithms, so this commit extends adds support for them in the PMD.
> >
> > Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
> > Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
> > ---
> > doc/guides/cryptodevs/aesni_mb.rst | 2 +
> > doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
> > doc/guides/rel_notes/release_17_11.rst | 7 +++
> > drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 74
> ++++++++++++++++++--------
> > drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42
> +++++++++++++++
> > test/test/test_cryptodev.c | 42 +++++++++++++++
> > test/test/test_cryptodev_des_test_vectors.h | 24 ++++++---
> > 7 files changed, 163 insertions(+), 31 deletions(-)
> >
> > <snip>
> >
> > +#include <des.h>
> > +
> > #include <rte_common.h>
> > #include <rte_hexdump.h>
> > #include <rte_cryptodev.h>
> > @@ -188,6 +190,7 @@ aesni_mb_set_session_cipher_parameters(const
> struct aesni_mb_op_fns *mb_ops,
> > struct aesni_mb_session *sess,
> > const struct rte_crypto_sym_xform *xform)
> > {
> > + uint8_t is_aes;
> Nitpicking: Maybe initialize with zero and remove is_aes = 0; from the
> switch body?
Good idea. Will do and will send a v3.
Thanks!
Pablo
> Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2 2/3] crypto/openssl: add support for DES-CBC
2017-09-15 2:09 ` [PATCH v2 0/3] Extend " Pablo de Lara
2017-09-15 2:09 ` [PATCH v2 1/3] crypto/aesni_mb: add " Pablo de Lara
@ 2017-09-15 2:09 ` Pablo de Lara
2017-09-18 11:31 ` Radu Nicolau
2017-09-15 2:09 ` [PATCH v2 3/3] app/crypto-perf: fix packet length check Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 0/3] Extend DES support Pablo de Lara
3 siblings, 1 reply; 21+ messages in thread
From: Pablo de Lara @ 2017-09-15 2:09 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
drivers/crypto/openssl/rte_openssl_pmd.c | 27 +++++++++++++++++++++++++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 20 ++++++++++++++++++++
test/test/test_cryptodev.c | 21 +++++++++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 6 ++++--
4 files changed, 72 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c
index 438535e..926caa6 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd.c
@@ -336,6 +336,33 @@ openssl_set_session_cipher_parameters(struct openssl_session *sess,
sess->cipher.key.data) != 0)
return -EINVAL;
break;
+
+ case RTE_CRYPTO_CIPHER_DES_CBC:
+ sess->cipher.algo = xform->cipher.algo;
+ sess->cipher.ctx = EVP_CIPHER_CTX_new();
+ sess->cipher.evp_algo = EVP_des_cbc();
+
+ get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
+ sess->cipher.key.data);
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
+ if (EVP_EncryptInit_ex(sess->cipher.ctx,
+ sess->cipher.evp_algo,
+ NULL, xform->cipher.key.data,
+ NULL) != 1) {
+ return -EINVAL;
+ }
+ } else if (sess->cipher.direction ==
+ RTE_CRYPTO_CIPHER_OP_DECRYPT) {
+ if (EVP_DecryptInit_ex(sess->cipher.ctx,
+ sess->cipher.evp_algo,
+ NULL, xform->cipher.key.data,
+ NULL) != 1) {
+ return -EINVAL;
+ }
+ }
+
+ break;
+
case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
sess->cipher.algo = xform->cipher.algo;
sess->chain_order = OPENSSL_CHAIN_CIPHER_BPI;
diff --git a/drivers/crypto/openssl/rte_openssl_pmd_ops.c b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
index 8cdd0b2..a197f79 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd_ops.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
@@ -427,6 +427,26 @@ static const struct rte_cryptodev_capabilities openssl_pmd_capabilities[] = {
}, }
}, }
},
+ { /* DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
{ /* DES DOCSIS BPI */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index c282f4d..0557152 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -4672,6 +4672,25 @@ test_DES_cipheronly_qat_all(void)
}
static int
+test_DES_cipheronly_openssl_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)),
+ BLKCIPHER_DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_DES_docsis_openssl_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -8353,6 +8372,8 @@ static struct unit_test_suite cryptodev_openssl_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown,
test_3DES_cipheronly_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_cipheronly_openssl_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
test_DES_docsis_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
test_authonly_openssl_all),
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index 9bb3618..bb01246 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -852,14 +852,16 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MB
+ BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "DES-CBC Decryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MB
+ BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
};
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v2 3/3] app/crypto-perf: fix packet length check
2017-09-15 2:09 ` [PATCH v2 0/3] Extend " Pablo de Lara
2017-09-15 2:09 ` [PATCH v2 1/3] crypto/aesni_mb: add " Pablo de Lara
2017-09-15 2:09 ` [PATCH v2 2/3] crypto/openssl: add support for DES-CBC Pablo de Lara
@ 2017-09-15 2:09 ` Pablo de Lara
2017-09-18 11:32 ` Radu Nicolau
2017-09-20 1:37 ` [PATCH v3 0/3] Extend DES support Pablo de Lara
3 siblings, 1 reply; 21+ messages in thread
From: Pablo de Lara @ 2017-09-15 2:09 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara, stable
When using DES-CBC, packet size has to be multiple
of 8 bytes, but if a list of packets is provided.
the check was not correct.
Fixes: fc4600fb2520 ("app/crypto-perf: add extra option checks")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
app/test-crypto-perf/cperf_options_parsing.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-perf/cperf_options_parsing.c
index 663f53f..3f933bc 100644
--- a/app/test-crypto-perf/cperf_options_parsing.c
+++ b/app/test-crypto-perf/cperf_options_parsing.c
@@ -832,14 +832,26 @@ check_cipher_buffer_length(struct cperf_options *options)
if (options->cipher_algo == RTE_CRYPTO_CIPHER_DES_CBC ||
options->cipher_algo == RTE_CRYPTO_CIPHER_3DES_CBC ||
options->cipher_algo == RTE_CRYPTO_CIPHER_3DES_ECB) {
- for (buffer_size = options->min_buffer_size;
- buffer_size < options->max_buffer_size;
- buffer_size += options->inc_buffer_size) {
+ if (options->inc_buffer_size != 0)
+ buffer_size = options->min_buffer_size;
+ else
+ buffer_size = options->buffer_size_list[0];
+
+ while (buffer_size <= options->max_buffer_size) {
if ((buffer_size % DES_BLOCK_SIZE) != 0) {
RTE_LOG(ERR, USER1, "Some of the buffer sizes are "
"not suitable for the algorithm selected\n");
return -EINVAL;
}
+
+ if (options->inc_buffer_size != 0)
+ buffer_size += options->inc_buffer_size;
+ else {
+ if (++buffer_size_idx == options->buffer_size_count)
+ break;
+ buffer_size = options->buffer_size_list[buffer_size_idx];
+ }
+
}
}
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v3 0/3] Extend DES support
2017-09-15 2:09 ` [PATCH v2 0/3] Extend " Pablo de Lara
` (2 preceding siblings ...)
2017-09-15 2:09 ` [PATCH v2 3/3] app/crypto-perf: fix packet length check Pablo de Lara
@ 2017-09-20 1:37 ` Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 1/3] crypto/aesni_mb: add " Pablo de Lara
` (3 more replies)
3 siblings, 4 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-09-20 1:37 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara
This patchset extends the support of DES algorithms to the AESNI MB and OpenSSL PMDs.
For AESNI MB PMD, the following algorithms are added:
- DES-CBC
- DES-DOCSISBPI
For OpenSSL PMD, DES-CBC is added, as DES-DOCSISBPI was already supported.
Changes in v3:
- Added release note for support for DES-CBC on OpenSSL PMD
- Addressed Radu's comments
Pablo de Lara (3):
crypto/aesni_mb: add DES support
crypto/openssl: add support for DES-CBC
app/crypto-perf: fix packet length check
app/test-crypto-perf/cperf_options_parsing.c | 18 +++++--
doc/guides/cryptodevs/aesni_mb.rst | 2 +
doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
doc/guides/rel_notes/release_17_11.rst | 13 +++++
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 72 ++++++++++++++++++--------
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42 +++++++++++++++
drivers/crypto/openssl/rte_openssl_pmd.c | 27 ++++++++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 20 +++++++
test/test/test_cryptodev.c | 63 ++++++++++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 26 +++++++---
10 files changed, 252 insertions(+), 34 deletions(-)
--
2.9.4
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v3 1/3] crypto/aesni_mb: add DES support
2017-09-20 1:37 ` [PATCH v3 0/3] Extend DES support Pablo de Lara
@ 2017-09-20 1:37 ` Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 2/3] crypto/openssl: add support for DES-CBC Pablo de Lara
` (2 subsequent siblings)
3 siblings, 0 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-09-20 1:37 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara
The Multi-buffer library now supports DES-CBC
and DES-DOCSISBPI algorithms, so this commit
extends adds support for them in the PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
---
doc/guides/cryptodevs/aesni_mb.rst | 2 +
doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
doc/guides/rel_notes/release_17_11.rst | 7 +++
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 72 ++++++++++++++++++--------
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42 +++++++++++++++
test/test/test_cryptodev.c | 42 +++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 24 ++++++---
7 files changed, 161 insertions(+), 31 deletions(-)
diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst
index b3b937f..2e07e1e 100644
--- a/doc/guides/cryptodevs/aesni_mb.rst
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -52,6 +52,8 @@ Cipher algorithms:
* RTE_CRYPTO_CIPHER_AES192_CTR
* RTE_CRYPTO_CIPHER_AES256_CTR
* RTE_CRYPTO_CIPHER_AES_DOCSISBPI
+* RTE_CRYPTO_CIPHER_DES_CBC
+* RTE_CRYPTO_CIPHER_DES_DOCSISBPI
Hash algorithms:
diff --git a/doc/guides/cryptodevs/features/aesni_mb.ini b/doc/guides/cryptodevs/features/aesni_mb.ini
index 03d8485..fab07cb 100644
--- a/doc/guides/cryptodevs/features/aesni_mb.ini
+++ b/doc/guides/cryptodevs/features/aesni_mb.ini
@@ -23,6 +23,9 @@ AES CTR (128) = Y
AES CTR (192) = Y
AES CTR (256) = Y
AES DOCSIS BPI = Y
+DES CBC = Y
+DES DOCSIS BPI = Y
+
;
; Supported authentication algorithms of the 'aesni_mb' crypto driver.
;
diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst
index 207c623..1ddc3cf 100644
--- a/doc/guides/rel_notes/release_17_11.rst
+++ b/doc/guides/rel_notes/release_17_11.rst
@@ -49,6 +49,13 @@ New Features
* Coalesce writes to HEAD CSR on response processing.
* Coalesce writes to TAIL CSR on request processing.
+* **Updated the AESNI MB PMD.**
+
+ The AESNI MB PMD has been updated with additional support for:
+
+ * DES CBC algorithm.
+ * DES DOCSIS BPI algorithm.
+
Resolved Issues
---------------
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
index f91504d..49242fc 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -30,6 +30,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <des.h>
+
#include <rte_common.h>
#include <rte_hexdump.h>
#include <rte_cryptodev.h>
@@ -188,6 +190,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
struct aesni_mb_session *sess,
const struct rte_crypto_sym_xform *xform)
{
+ uint8_t is_aes = 0;
aes_keyexp_t aes_keyexp_fn;
if (xform == NULL) {
@@ -217,45 +220,68 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
switch (xform->cipher.algo) {
case RTE_CRYPTO_CIPHER_AES_CBC:
sess->cipher.mode = CBC;
+ is_aes = 1;
break;
case RTE_CRYPTO_CIPHER_AES_CTR:
sess->cipher.mode = CNTR;
+ is_aes = 1;
break;
case RTE_CRYPTO_CIPHER_AES_DOCSISBPI:
sess->cipher.mode = DOCSIS_SEC_BPI;
+ is_aes = 1;
break;
- default:
- MB_LOG_ERR("Unsupported cipher mode parameter");
- return -ENOTSUP;
- }
-
- /* Check key length and choose key expansion function */
- switch (xform->cipher.key.length) {
- case AES_128_BYTES:
- sess->cipher.key_length_in_bytes = AES_128_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+ case RTE_CRYPTO_CIPHER_DES_CBC:
+ sess->cipher.mode = DES;
break;
- case AES_192_BYTES:
- sess->cipher.key_length_in_bytes = AES_192_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
- break;
- case AES_256_BYTES:
- sess->cipher.key_length_in_bytes = AES_256_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+ case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
+ sess->cipher.mode = DOCSIS_DES;
break;
default:
- MB_LOG_ERR("Invalid cipher key length");
- return -EINVAL;
+ MB_LOG_ERR("Unsupported cipher mode parameter");
+ return -ENOTSUP;
}
/* Set IV parameters */
sess->iv.offset = xform->cipher.iv.offset;
sess->iv.length = xform->cipher.iv.length;
- /* Expanded cipher keys */
- (*aes_keyexp_fn)(xform->cipher.key.data,
- sess->cipher.expanded_aes_keys.encode,
- sess->cipher.expanded_aes_keys.decode);
+ /* Check key length and choose key expansion function for AES */
+ if (is_aes) {
+ switch (xform->cipher.key.length) {
+ case AES_128_BYTES:
+ sess->cipher.key_length_in_bytes = AES_128_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+ break;
+ case AES_192_BYTES:
+ sess->cipher.key_length_in_bytes = AES_192_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
+ break;
+ case AES_256_BYTES:
+ sess->cipher.key_length_in_bytes = AES_256_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+ break;
+ default:
+ MB_LOG_ERR("Invalid cipher key length");
+ return -EINVAL;
+ }
+
+ /* Expanded cipher keys */
+ (*aes_keyexp_fn)(xform->cipher.key.data,
+ sess->cipher.expanded_aes_keys.encode,
+ sess->cipher.expanded_aes_keys.decode);
+
+ } else {
+ if (xform->cipher.key.length != 8) {
+ MB_LOG_ERR("Invalid cipher key length");
+ return -EINVAL;
+ }
+ sess->cipher.key_length_in_bytes = 8;
+
+ des_key_schedule((uint64_t *)sess->cipher.expanded_aes_keys.encode,
+ xform->cipher.key.data);
+ des_key_schedule((uint64_t *)sess->cipher.expanded_aes_keys.decode,
+ xform->cipher.key.data);
+ }
return 0;
}
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
index 4be9b80..2e52ac2 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
@@ -247,6 +247,48 @@ static const struct rte_cryptodev_capabilities aesni_mb_pmd_capabilities[] = {
}, }
}, }
},
+ { /* DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* DES DOCSIS BPI */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_DOCSISBPI,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+
RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
};
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index a4116c6..c282f4d 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -4691,6 +4691,44 @@ test_DES_docsis_openssl_all(void)
}
static int
+test_DES_cipheronly_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)),
+ BLKCIPHER_DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_DES_docsis_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)),
+ BLKCIPHER_DES_DOCSIS_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_3DES_chain_dpaa2_sec_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -8289,6 +8327,10 @@ static struct unit_test_suite cryptodev_aesni_mb_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_cipheronly_mb_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_docsis_mb_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_authonly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_cipheronly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_docsis_mb_all),
TEST_CASES_END() /**< NULL terminate unit test array */
}
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index 0b6e0b8..9bb3618 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -851,13 +851,15 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.test_descr = "DES-CBC Encryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-CBC Decryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
};
@@ -965,42 +967,48 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.test_data = &des_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Runt Block Encryption",
.test_data = &des_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Uneven Encryption",
.test_data = &des_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Full Block Decryption",
.test_data = &des_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Runt Block Decryption",
.test_data = &des_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Uneven Decryption",
.test_data = &des_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Full Block Encryption",
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v3 2/3] crypto/openssl: add support for DES-CBC
2017-09-20 1:37 ` [PATCH v3 0/3] Extend DES support Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 1/3] crypto/aesni_mb: add " Pablo de Lara
@ 2017-09-20 1:37 ` Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 3/3] app/crypto-perf: fix packet length check Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 0/4] Extend DES support Pablo de Lara
3 siblings, 0 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-09-20 1:37 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
---
doc/guides/rel_notes/release_17_11.rst | 6 ++++++
drivers/crypto/openssl/rte_openssl_pmd.c | 27 +++++++++++++++++++++++++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 20 ++++++++++++++++++++
test/test/test_cryptodev.c | 21 +++++++++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 6 ++++--
5 files changed, 78 insertions(+), 2 deletions(-)
diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst
index 1ddc3cf..683cc22 100644
--- a/doc/guides/rel_notes/release_17_11.rst
+++ b/doc/guides/rel_notes/release_17_11.rst
@@ -56,6 +56,12 @@ New Features
* DES CBC algorithm.
* DES DOCSIS BPI algorithm.
+* **Updated the OpenSSL PMD.**
+
+ The OpenSSL PMD has been updated with additional support for:
+
+ * DES CBC algorithm.
+
Resolved Issues
---------------
diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c
index 438535e..926caa6 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd.c
@@ -336,6 +336,33 @@ openssl_set_session_cipher_parameters(struct openssl_session *sess,
sess->cipher.key.data) != 0)
return -EINVAL;
break;
+
+ case RTE_CRYPTO_CIPHER_DES_CBC:
+ sess->cipher.algo = xform->cipher.algo;
+ sess->cipher.ctx = EVP_CIPHER_CTX_new();
+ sess->cipher.evp_algo = EVP_des_cbc();
+
+ get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
+ sess->cipher.key.data);
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
+ if (EVP_EncryptInit_ex(sess->cipher.ctx,
+ sess->cipher.evp_algo,
+ NULL, xform->cipher.key.data,
+ NULL) != 1) {
+ return -EINVAL;
+ }
+ } else if (sess->cipher.direction ==
+ RTE_CRYPTO_CIPHER_OP_DECRYPT) {
+ if (EVP_DecryptInit_ex(sess->cipher.ctx,
+ sess->cipher.evp_algo,
+ NULL, xform->cipher.key.data,
+ NULL) != 1) {
+ return -EINVAL;
+ }
+ }
+
+ break;
+
case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
sess->cipher.algo = xform->cipher.algo;
sess->chain_order = OPENSSL_CHAIN_CIPHER_BPI;
diff --git a/drivers/crypto/openssl/rte_openssl_pmd_ops.c b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
index 8cdd0b2..a197f79 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd_ops.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
@@ -427,6 +427,26 @@ static const struct rte_cryptodev_capabilities openssl_pmd_capabilities[] = {
}, }
}, }
},
+ { /* DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
{ /* DES DOCSIS BPI */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index c282f4d..0557152 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -4672,6 +4672,25 @@ test_DES_cipheronly_qat_all(void)
}
static int
+test_DES_cipheronly_openssl_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)),
+ BLKCIPHER_DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_DES_docsis_openssl_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -8353,6 +8372,8 @@ static struct unit_test_suite cryptodev_openssl_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown,
test_3DES_cipheronly_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_cipheronly_openssl_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
test_DES_docsis_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
test_authonly_openssl_all),
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index 9bb3618..bb01246 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -852,14 +852,16 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MB
+ BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "DES-CBC Decryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MB
+ BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
};
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v3 3/3] app/crypto-perf: fix packet length check
2017-09-20 1:37 ` [PATCH v3 0/3] Extend DES support Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 1/3] crypto/aesni_mb: add " Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 2/3] crypto/openssl: add support for DES-CBC Pablo de Lara
@ 2017-09-20 1:37 ` Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 0/4] Extend DES support Pablo de Lara
3 siblings, 0 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-09-20 1:37 UTC (permalink / raw)
To: declan.doherty; +Cc: dev, Pablo de Lara, stable
When using DES-CBC, packet size has to be multiple
of 8 bytes, but if a list of packets is provided.
the check was not correct.
Fixes: fc4600fb2520 ("app/crypto-perf: add extra option checks")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
---
app/test-crypto-perf/cperf_options_parsing.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-perf/cperf_options_parsing.c
index 663f53f..3f933bc 100644
--- a/app/test-crypto-perf/cperf_options_parsing.c
+++ b/app/test-crypto-perf/cperf_options_parsing.c
@@ -832,14 +832,26 @@ check_cipher_buffer_length(struct cperf_options *options)
if (options->cipher_algo == RTE_CRYPTO_CIPHER_DES_CBC ||
options->cipher_algo == RTE_CRYPTO_CIPHER_3DES_CBC ||
options->cipher_algo == RTE_CRYPTO_CIPHER_3DES_ECB) {
- for (buffer_size = options->min_buffer_size;
- buffer_size < options->max_buffer_size;
- buffer_size += options->inc_buffer_size) {
+ if (options->inc_buffer_size != 0)
+ buffer_size = options->min_buffer_size;
+ else
+ buffer_size = options->buffer_size_list[0];
+
+ while (buffer_size <= options->max_buffer_size) {
if ((buffer_size % DES_BLOCK_SIZE) != 0) {
RTE_LOG(ERR, USER1, "Some of the buffer sizes are "
"not suitable for the algorithm selected\n");
return -EINVAL;
}
+
+ if (options->inc_buffer_size != 0)
+ buffer_size += options->inc_buffer_size;
+ else {
+ if (++buffer_size_idx == options->buffer_size_count)
+ break;
+ buffer_size = options->buffer_size_list[buffer_size_idx];
+ }
+
}
}
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 0/4] Extend DES support
2017-09-20 1:37 ` [PATCH v3 0/3] Extend DES support Pablo de Lara
` (2 preceding siblings ...)
2017-09-20 1:37 ` [PATCH v3 3/3] app/crypto-perf: fix packet length check Pablo de Lara
@ 2017-10-05 5:27 ` Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 1/4] doc: update IPSec Multi-buffer lib versioning Pablo de Lara
` (4 more replies)
3 siblings, 5 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-10-05 5:27 UTC (permalink / raw)
To: declan.doherty, john.mcnamara; +Cc: dev, Pablo de Lara
This patchset extends the support of DES algorithms to the AESNI MB and OpenSSL PMDs.
For AESNI MB PMD, the following algorithms are added:
- DES-CBC
- DES-DOCSISBPI
For OpenSSL PMD, DES-CBC is added, as DES-DOCSISBPI was already supported.
Changes in v4:
- Updated documentation now that Multi-buffer library 0.47 has been released
Changes in v3:
- Added release note for support for DES-CBC on OpenSSL PMD
- Addressed Radu's comments
Pablo de Lara (4):
doc: update IPSec Multi-buffer lib versioning
crypto/aesni_mb: add DES support
crypto/openssl: add support for DES-CBC
app/crypto-perf: fix packet length check
app/test-crypto-perf/cperf_options_parsing.c | 18 +++++--
doc/guides/cryptodevs/aesni_mb.rst | 21 ++++----
doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
doc/guides/rel_notes/release_17_11.rst | 16 ++++++
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 72 ++++++++++++++++++--------
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42 +++++++++++++++
drivers/crypto/openssl/rte_openssl_pmd.c | 27 ++++++++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 20 +++++++
test/test/test_cryptodev.c | 63 ++++++++++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 26 +++++++---
10 files changed, 265 insertions(+), 43 deletions(-)
--
2.9.4
^ permalink raw reply [flat|nested] 21+ messages in thread* [PATCH v4 1/4] doc: update IPSec Multi-buffer lib versioning
2017-10-05 5:27 ` [PATCH v4 0/4] Extend DES support Pablo de Lara
@ 2017-10-05 5:27 ` Pablo de Lara
2017-10-05 13:55 ` Mcnamara, John
2017-10-05 5:27 ` [PATCH v4 2/4] crypto/aesni_mb: add DES support Pablo de Lara
` (3 subsequent siblings)
4 siblings, 1 reply; 21+ messages in thread
From: Pablo de Lara @ 2017-10-05 5:27 UTC (permalink / raw)
To: declan.doherty, john.mcnamara; +Cc: dev, Pablo de Lara
IPSec Multi-buffer library v0.47 has been released,
which includes, among other features, support for DES-CBC
and DES-DOCSIS.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
doc/guides/cryptodevs/aesni_mb.rst | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst
index b3b937f..25d2553 100644
--- a/doc/guides/cryptodevs/aesni_mb.rst
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -76,8 +76,8 @@ Installation
To build DPDK with the AESNI_MB_PMD the user is required to download the multi-buffer
library from `here <https://github.com/01org/intel-ipsec-mb>`_
and compile it on their user system before building DPDK.
-The latest version of the library supported by this PMD is v0.46, which
-can be downloaded in `<https://github.com/01org/intel-ipsec-mb/archive/v0.46.zip>`_.
+The latest version of the library supported by this PMD is v0.47, which
+can be downloaded in `<https://github.com/01org/intel-ipsec-mb/archive/v0.47.zip>`_.
.. code-block:: console
@@ -90,13 +90,14 @@ and the Multi-Buffer library version supported by them:
.. table:: DPDK and Multi-Buffer library version compatibility
- ============= ============================
- DPDK version Multi-buffer library version
- ============= ============================
- 2.2 - 16.11 0.43 - 0.44
- 17.02 0.44
- 17.05+ 0.45+
- ============= ============================
+ ============== ============================
+ DPDK version Multi-buffer library version
+ ============== ============================
+ 2.2 - 16.11 0.43 - 0.44
+ 17.02 0.44
+ 17.05 - 17.08 0.45 - 0.47
+ 17.11+ 0.47
+ ============== ============================
Initialization
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v4 1/4] doc: update IPSec Multi-buffer lib versioning
2017-10-05 5:27 ` [PATCH v4 1/4] doc: update IPSec Multi-buffer lib versioning Pablo de Lara
@ 2017-10-05 13:55 ` Mcnamara, John
0 siblings, 0 replies; 21+ messages in thread
From: Mcnamara, John @ 2017-10-05 13:55 UTC (permalink / raw)
To: De Lara Guarch, Pablo, Doherty, Declan; +Cc: dev
> -----Original Message-----
> From: De Lara Guarch, Pablo
> Sent: Thursday, October 5, 2017 6:28 AM
> To: Doherty, Declan <declan.doherty@intel.com>; Mcnamara, John
> <john.mcnamara@intel.com>
> Cc: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
> Subject: [PATCH v4 1/4] doc: update IPSec Multi-buffer lib versioning
>
> IPSec Multi-buffer library v0.47 has been released, which includes, among
> other features, support for DES-CBC and DES-DOCSIS.
>
> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4 2/4] crypto/aesni_mb: add DES support
2017-10-05 5:27 ` [PATCH v4 0/4] Extend DES support Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 1/4] doc: update IPSec Multi-buffer lib versioning Pablo de Lara
@ 2017-10-05 5:27 ` Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 3/4] crypto/openssl: add support for DES-CBC Pablo de Lara
` (2 subsequent siblings)
4 siblings, 0 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-10-05 5:27 UTC (permalink / raw)
To: declan.doherty, john.mcnamara; +Cc: dev, Pablo de Lara
The Multi-buffer library now supports DES-CBC
and DES-DOCSISBPI algorithms, so this commit
extends adds support for them in the PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
---
doc/guides/cryptodevs/aesni_mb.rst | 2 +
doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
doc/guides/rel_notes/release_17_11.rst | 10 ++++
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 72 ++++++++++++++++++--------
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42 +++++++++++++++
test/test/test_cryptodev.c | 42 +++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 24 ++++++---
7 files changed, 164 insertions(+), 31 deletions(-)
diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst
index 25d2553..e908951 100644
--- a/doc/guides/cryptodevs/aesni_mb.rst
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -52,6 +52,8 @@ Cipher algorithms:
* RTE_CRYPTO_CIPHER_AES192_CTR
* RTE_CRYPTO_CIPHER_AES256_CTR
* RTE_CRYPTO_CIPHER_AES_DOCSISBPI
+* RTE_CRYPTO_CIPHER_DES_CBC
+* RTE_CRYPTO_CIPHER_DES_DOCSISBPI
Hash algorithms:
diff --git a/doc/guides/cryptodevs/features/aesni_mb.ini b/doc/guides/cryptodevs/features/aesni_mb.ini
index 03d8485..fab07cb 100644
--- a/doc/guides/cryptodevs/features/aesni_mb.ini
+++ b/doc/guides/cryptodevs/features/aesni_mb.ini
@@ -23,6 +23,9 @@ AES CTR (128) = Y
AES CTR (192) = Y
AES CTR (256) = Y
AES DOCSIS BPI = Y
+DES CBC = Y
+DES DOCSIS BPI = Y
+
;
; Supported authentication algorithms of the 'aesni_mb' crypto driver.
;
diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst
index ca286a5..30fe28d 100644
--- a/doc/guides/rel_notes/release_17_11.rst
+++ b/doc/guides/rel_notes/release_17_11.rst
@@ -49,6 +49,16 @@ New Features
* Coalesce writes to HEAD CSR on response processing.
* Coalesce writes to TAIL CSR on request processing.
+* **Updated the AESNI MB PMD.**
+
+ The AESNI MB PMD has been updated with additional support for:
+
+ * DES CBC algorithm.
+ * DES DOCSIS BPI algorithm.
+
+ This requires the IPSec Multi-buffer library 0.47. For more details,
+ check out the AESNI MB PMD documenation.
+
* **Add new benchmarking mode to dpdk-test-crypto-perf application.**
Added new "PMD cyclecount" benchmark mode to dpdk-test-crypto-perf application
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
index f91504d..49242fc 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -30,6 +30,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <des.h>
+
#include <rte_common.h>
#include <rte_hexdump.h>
#include <rte_cryptodev.h>
@@ -188,6 +190,7 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
struct aesni_mb_session *sess,
const struct rte_crypto_sym_xform *xform)
{
+ uint8_t is_aes = 0;
aes_keyexp_t aes_keyexp_fn;
if (xform == NULL) {
@@ -217,45 +220,68 @@ aesni_mb_set_session_cipher_parameters(const struct aesni_mb_op_fns *mb_ops,
switch (xform->cipher.algo) {
case RTE_CRYPTO_CIPHER_AES_CBC:
sess->cipher.mode = CBC;
+ is_aes = 1;
break;
case RTE_CRYPTO_CIPHER_AES_CTR:
sess->cipher.mode = CNTR;
+ is_aes = 1;
break;
case RTE_CRYPTO_CIPHER_AES_DOCSISBPI:
sess->cipher.mode = DOCSIS_SEC_BPI;
+ is_aes = 1;
break;
- default:
- MB_LOG_ERR("Unsupported cipher mode parameter");
- return -ENOTSUP;
- }
-
- /* Check key length and choose key expansion function */
- switch (xform->cipher.key.length) {
- case AES_128_BYTES:
- sess->cipher.key_length_in_bytes = AES_128_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+ case RTE_CRYPTO_CIPHER_DES_CBC:
+ sess->cipher.mode = DES;
break;
- case AES_192_BYTES:
- sess->cipher.key_length_in_bytes = AES_192_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
- break;
- case AES_256_BYTES:
- sess->cipher.key_length_in_bytes = AES_256_BYTES;
- aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+ case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
+ sess->cipher.mode = DOCSIS_DES;
break;
default:
- MB_LOG_ERR("Invalid cipher key length");
- return -EINVAL;
+ MB_LOG_ERR("Unsupported cipher mode parameter");
+ return -ENOTSUP;
}
/* Set IV parameters */
sess->iv.offset = xform->cipher.iv.offset;
sess->iv.length = xform->cipher.iv.length;
- /* Expanded cipher keys */
- (*aes_keyexp_fn)(xform->cipher.key.data,
- sess->cipher.expanded_aes_keys.encode,
- sess->cipher.expanded_aes_keys.decode);
+ /* Check key length and choose key expansion function for AES */
+ if (is_aes) {
+ switch (xform->cipher.key.length) {
+ case AES_128_BYTES:
+ sess->cipher.key_length_in_bytes = AES_128_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes128;
+ break;
+ case AES_192_BYTES:
+ sess->cipher.key_length_in_bytes = AES_192_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes192;
+ break;
+ case AES_256_BYTES:
+ sess->cipher.key_length_in_bytes = AES_256_BYTES;
+ aes_keyexp_fn = mb_ops->aux.keyexp.aes256;
+ break;
+ default:
+ MB_LOG_ERR("Invalid cipher key length");
+ return -EINVAL;
+ }
+
+ /* Expanded cipher keys */
+ (*aes_keyexp_fn)(xform->cipher.key.data,
+ sess->cipher.expanded_aes_keys.encode,
+ sess->cipher.expanded_aes_keys.decode);
+
+ } else {
+ if (xform->cipher.key.length != 8) {
+ MB_LOG_ERR("Invalid cipher key length");
+ return -EINVAL;
+ }
+ sess->cipher.key_length_in_bytes = 8;
+
+ des_key_schedule((uint64_t *)sess->cipher.expanded_aes_keys.encode,
+ xform->cipher.key.data);
+ des_key_schedule((uint64_t *)sess->cipher.expanded_aes_keys.decode,
+ xform->cipher.key.data);
+ }
return 0;
}
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
index 4be9b80..2e52ac2 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
@@ -247,6 +247,48 @@ static const struct rte_cryptodev_capabilities aesni_mb_pmd_capabilities[] = {
}, }
}, }
},
+ { /* DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* DES DOCSIS BPI */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_DOCSISBPI,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+
RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
};
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index a4116c6..c282f4d 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -4691,6 +4691,44 @@ test_DES_docsis_openssl_all(void)
}
static int
+test_DES_cipheronly_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)),
+ BLKCIPHER_DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_DES_docsis_mb_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD)),
+ BLKCIPHER_DES_DOCSIS_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_3DES_chain_dpaa2_sec_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -8289,6 +8327,10 @@ static struct unit_test_suite cryptodev_aesni_mb_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_cipheronly_mb_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_AES_docsis_mb_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_authonly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_cipheronly_mb_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_docsis_mb_all),
TEST_CASES_END() /**< NULL terminate unit test array */
}
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index 0b6e0b8..9bb3618 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -851,13 +851,15 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.test_descr = "DES-CBC Encryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-CBC Decryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
};
@@ -965,42 +967,48 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
.test_data = &des_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Runt Block Encryption",
.test_data = &des_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Uneven Encryption",
.test_data = &des_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Full Block Decryption",
.test_data = &des_test_data_1,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Runt Block Decryption",
.test_data = &des_test_data_2,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI Uneven Decryption",
.test_data = &des_test_data_3,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
- BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MB
},
{
.test_descr = "DES-DOCSIS-BPI OOP Full Block Encryption",
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 3/4] crypto/openssl: add support for DES-CBC
2017-10-05 5:27 ` [PATCH v4 0/4] Extend DES support Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 1/4] doc: update IPSec Multi-buffer lib versioning Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 2/4] crypto/aesni_mb: add DES support Pablo de Lara
@ 2017-10-05 5:27 ` Pablo de Lara
2017-10-05 5:28 ` [PATCH v4 4/4] app/crypto-perf: fix packet length check Pablo de Lara
2017-10-05 14:14 ` [PATCH v4 0/4] Extend DES support De Lara Guarch, Pablo
4 siblings, 0 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-10-05 5:27 UTC (permalink / raw)
To: declan.doherty, john.mcnamara; +Cc: dev, Pablo de Lara
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
---
doc/guides/rel_notes/release_17_11.rst | 6 ++++++
drivers/crypto/openssl/rte_openssl_pmd.c | 27 +++++++++++++++++++++++++++
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 20 ++++++++++++++++++++
test/test/test_cryptodev.c | 21 +++++++++++++++++++++
test/test/test_cryptodev_des_test_vectors.h | 6 ++++--
5 files changed, 78 insertions(+), 2 deletions(-)
diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst
index 30fe28d..f2c83f0 100644
--- a/doc/guides/rel_notes/release_17_11.rst
+++ b/doc/guides/rel_notes/release_17_11.rst
@@ -59,6 +59,12 @@ New Features
This requires the IPSec Multi-buffer library 0.47. For more details,
check out the AESNI MB PMD documenation.
+* **Updated the OpenSSL PMD.**
+
+ The OpenSSL PMD has been updated with additional support for:
+
+ * DES CBC algorithm.
+
* **Add new benchmarking mode to dpdk-test-crypto-perf application.**
Added new "PMD cyclecount" benchmark mode to dpdk-test-crypto-perf application
diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c
index 280148e..0c822a4 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd.c
@@ -355,6 +355,33 @@ openssl_set_session_cipher_parameters(struct openssl_session *sess,
sess->cipher.key.data) != 0)
return -EINVAL;
break;
+
+ case RTE_CRYPTO_CIPHER_DES_CBC:
+ sess->cipher.algo = xform->cipher.algo;
+ sess->cipher.ctx = EVP_CIPHER_CTX_new();
+ sess->cipher.evp_algo = EVP_des_cbc();
+
+ get_cipher_key(xform->cipher.key.data, sess->cipher.key.length,
+ sess->cipher.key.data);
+ if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
+ if (EVP_EncryptInit_ex(sess->cipher.ctx,
+ sess->cipher.evp_algo,
+ NULL, xform->cipher.key.data,
+ NULL) != 1) {
+ return -EINVAL;
+ }
+ } else if (sess->cipher.direction ==
+ RTE_CRYPTO_CIPHER_OP_DECRYPT) {
+ if (EVP_DecryptInit_ex(sess->cipher.ctx,
+ sess->cipher.evp_algo,
+ NULL, xform->cipher.key.data,
+ NULL) != 1) {
+ return -EINVAL;
+ }
+ }
+
+ break;
+
case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
sess->cipher.algo = xform->cipher.algo;
sess->chain_order = OPENSSL_CHAIN_CIPHER_BPI;
diff --git a/drivers/crypto/openssl/rte_openssl_pmd_ops.c b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
index 8cdd0b2..a197f79 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd_ops.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
@@ -427,6 +427,26 @@ static const struct rte_cryptodev_capabilities openssl_pmd_capabilities[] = {
}, }
}, }
},
+ { /* DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
{ /* DES DOCSIS BPI */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
{.sym = {
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index c282f4d..0557152 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -4672,6 +4672,25 @@ test_DES_cipheronly_qat_all(void)
}
static int
+test_DES_cipheronly_openssl_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)),
+ BLKCIPHER_DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
test_DES_docsis_openssl_all(void)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -8353,6 +8372,8 @@ static struct unit_test_suite cryptodev_openssl_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown,
test_3DES_cipheronly_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
+ test_DES_cipheronly_openssl_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
test_DES_docsis_openssl_all),
TEST_CASE_ST(ut_setup, ut_teardown,
test_authonly_openssl_all),
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index 9bb3618..bb01246 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -852,14 +852,16 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MB
+ BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
{
.test_descr = "DES-CBC Decryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_MB
+ BLOCKCIPHER_TEST_TARGET_PMD_MB |
+ BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
},
};
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 4/4] app/crypto-perf: fix packet length check
2017-10-05 5:27 ` [PATCH v4 0/4] Extend DES support Pablo de Lara
` (2 preceding siblings ...)
2017-10-05 5:27 ` [PATCH v4 3/4] crypto/openssl: add support for DES-CBC Pablo de Lara
@ 2017-10-05 5:28 ` Pablo de Lara
2017-10-05 14:14 ` [PATCH v4 0/4] Extend DES support De Lara Guarch, Pablo
4 siblings, 0 replies; 21+ messages in thread
From: Pablo de Lara @ 2017-10-05 5:28 UTC (permalink / raw)
To: declan.doherty, john.mcnamara; +Cc: dev, Pablo de Lara, stable
When using DES-CBC, packet size has to be multiple
of 8 bytes, but if a list of packets is provided.
the check was not correct.
Fixes: fc4600fb2520 ("app/crypto-perf: add extra option checks")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
---
app/test-crypto-perf/cperf_options_parsing.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-perf/cperf_options_parsing.c
index f3508a4..af81162 100644
--- a/app/test-crypto-perf/cperf_options_parsing.c
+++ b/app/test-crypto-perf/cperf_options_parsing.c
@@ -876,14 +876,26 @@ check_cipher_buffer_length(struct cperf_options *options)
if (options->cipher_algo == RTE_CRYPTO_CIPHER_DES_CBC ||
options->cipher_algo == RTE_CRYPTO_CIPHER_3DES_CBC ||
options->cipher_algo == RTE_CRYPTO_CIPHER_3DES_ECB) {
- for (buffer_size = options->min_buffer_size;
- buffer_size < options->max_buffer_size;
- buffer_size += options->inc_buffer_size) {
+ if (options->inc_buffer_size != 0)
+ buffer_size = options->min_buffer_size;
+ else
+ buffer_size = options->buffer_size_list[0];
+
+ while (buffer_size <= options->max_buffer_size) {
if ((buffer_size % DES_BLOCK_SIZE) != 0) {
RTE_LOG(ERR, USER1, "Some of the buffer sizes are "
"not suitable for the algorithm selected\n");
return -EINVAL;
}
+
+ if (options->inc_buffer_size != 0)
+ buffer_size += options->inc_buffer_size;
+ else {
+ if (++buffer_size_idx == options->buffer_size_count)
+ break;
+ buffer_size = options->buffer_size_list[buffer_size_idx];
+ }
+
}
}
--
2.9.4
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v4 0/4] Extend DES support
2017-10-05 5:27 ` [PATCH v4 0/4] Extend DES support Pablo de Lara
` (3 preceding siblings ...)
2017-10-05 5:28 ` [PATCH v4 4/4] app/crypto-perf: fix packet length check Pablo de Lara
@ 2017-10-05 14:14 ` De Lara Guarch, Pablo
4 siblings, 0 replies; 21+ messages in thread
From: De Lara Guarch, Pablo @ 2017-10-05 14:14 UTC (permalink / raw)
To: Doherty, Declan, Mcnamara, John; +Cc: dev
> -----Original Message-----
> From: De Lara Guarch, Pablo
> Sent: Thursday, October 5, 2017 6:28 AM
> To: Doherty, Declan <declan.doherty@intel.com>; Mcnamara, John
> <john.mcnamara@intel.com>
> Cc: dev@dpdk.org; De Lara Guarch, Pablo
> <pablo.de.lara.guarch@intel.com>
> Subject: [PATCH v4 0/4] Extend DES support
>
> This patchset extends the support of DES algorithms to the AESNI MB and
> OpenSSL PMDs.
> For AESNI MB PMD, the following algorithms are added:
> - DES-CBC
> - DES-DOCSISBPI
>
> For OpenSSL PMD, DES-CBC is added, as DES-DOCSISBPI was already
> supported.
>
> Changes in v4:
> - Updated documentation now that Multi-buffer library 0.47 has been
> released
>
> Changes in v3:
> - Added release note for support for DES-CBC on OpenSSL PMD
> - Addressed Radu's comments
>
> Pablo de Lara (4):
> doc: update IPSec Multi-buffer lib versioning
> crypto/aesni_mb: add DES support
> crypto/openssl: add support for DES-CBC
> app/crypto-perf: fix packet length check
>
> app/test-crypto-perf/cperf_options_parsing.c | 18 +++++--
> doc/guides/cryptodevs/aesni_mb.rst | 21 ++++----
> doc/guides/cryptodevs/features/aesni_mb.ini | 3 ++
> doc/guides/rel_notes/release_17_11.rst | 16 ++++++
> drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 72
> ++++++++++++++++++--------
> drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 42
> +++++++++++++++
> drivers/crypto/openssl/rte_openssl_pmd.c | 27 ++++++++++
> drivers/crypto/openssl/rte_openssl_pmd_ops.c | 20 +++++++
> test/test/test_cryptodev.c | 63 ++++++++++++++++++++++
> test/test/test_cryptodev_des_test_vectors.h | 26 +++++++---
> 10 files changed, 265 insertions(+), 43 deletions(-)
>
> --
> 2.9.4
Applied to dpdk-next-crypto.
Pablo
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2017-10-05 14:14 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-18 6:17 [PATCH] crypto/aesni_mb: add DES support Pablo de Lara
2017-09-04 9:07 ` Zhang, Roy Fan
2017-09-15 2:09 ` [PATCH v2 0/3] Extend " Pablo de Lara
2017-09-15 2:09 ` [PATCH v2 1/3] crypto/aesni_mb: add " Pablo de Lara
2017-09-18 10:56 ` Radu Nicolau
2017-09-18 14:08 ` De Lara Guarch, Pablo
2017-09-15 2:09 ` [PATCH v2 2/3] crypto/openssl: add support for DES-CBC Pablo de Lara
2017-09-18 11:31 ` Radu Nicolau
2017-09-15 2:09 ` [PATCH v2 3/3] app/crypto-perf: fix packet length check Pablo de Lara
2017-09-18 11:32 ` Radu Nicolau
2017-09-20 1:37 ` [PATCH v3 0/3] Extend DES support Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 1/3] crypto/aesni_mb: add " Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 2/3] crypto/openssl: add support for DES-CBC Pablo de Lara
2017-09-20 1:37 ` [PATCH v3 3/3] app/crypto-perf: fix packet length check Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 0/4] Extend DES support Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 1/4] doc: update IPSec Multi-buffer lib versioning Pablo de Lara
2017-10-05 13:55 ` Mcnamara, John
2017-10-05 5:27 ` [PATCH v4 2/4] crypto/aesni_mb: add DES support Pablo de Lara
2017-10-05 5:27 ` [PATCH v4 3/4] crypto/openssl: add support for DES-CBC Pablo de Lara
2017-10-05 5:28 ` [PATCH v4 4/4] app/crypto-perf: fix packet length check Pablo de Lara
2017-10-05 14:14 ` [PATCH v4 0/4] Extend DES support De Lara Guarch, Pablo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.