[PATCH] i.MX SPI DMA cleanup

[PATCH] i.MX SPI DMA cleanup

[Sascha Hauer]

This picks up a series sent by Anton Bondarenko last year. It
contains the remaining not yet upstreamed patches from Antons series
plus some more DMA related cleanup patches.

My mission was to hunt a bug in the DMA code path sometimes causing
an additional word in the RX FIFO which locked up the driver in the
next transfer. It turned out that this was no bug in the driver but
instead in the device tree: We used the wrong SDMA script for i.MX6.
The ECSPI cores are connected through the SPBA, so according to the
reference manual we need the shp/mcu scripts rather than the app/mcu
scripts.

Shawn, please pick up the last patch. The rest can go through the SPI
tree. The last patch has no dependency on the remaining patches.

Sascha

----------------------------------------------------------------
Anton Bondarenko (3):
      spi: imx: allow only WML aligned transfers to use DMA
      spi: imx: replace fixed timeout with calculated
      spi: imx: add support for all SPI word width for DMA

Sascha Hauer (10):
      spi: imx: use proper dev_* functions for driver messages
      spi: imx: drop fallback to PIO
      spi: imx: initialize usedma earlier
      spi: imx: drop unnecessary read/modify/write
      spi: imx: drop unncessary dma_is_inited variable
      spi: imx: remove unnecessary bit clearing in mx51_ecspi_config
      spi: imx: make some register defines simpler
      spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function
      spi: imx: drop bogus tests for rx/tx bufs in DMA transfer
      ARM: dts: imx6: Use correct SDMA script for SPI cores

 arch/arm/boot/dts/imx6qdl.dtsi |   8 +-
 drivers/spi/spi-imx.c          | 350 +++++++++++++++++++++--------------------
 2 files changed, 185 insertions(+), 173 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] i.MX SPI DMA cleanup

[Sascha Hauer]

This picks up a series sent by Anton Bondarenko last year. It
contains the remaining not yet upstreamed patches from Antons series
plus some more DMA related cleanup patches.

My mission was to hunt a bug in the DMA code path sometimes causing
an additional word in the RX FIFO which locked up the driver in the
next transfer. It turned out that this was no bug in the driver but
instead in the device tree: We used the wrong SDMA script for i.MX6.
The ECSPI cores are connected through the SPBA, so according to the
reference manual we need the shp/mcu scripts rather than the app/mcu
scripts.

Shawn, please pick up the last patch. The rest can go through the SPI
tree. The last patch has no dependency on the remaining patches.

Sascha

----------------------------------------------------------------
Anton Bondarenko (3):
      spi: imx: allow only WML aligned transfers to use DMA
      spi: imx: replace fixed timeout with calculated
      spi: imx: add support for all SPI word width for DMA

Sascha Hauer (10):
      spi: imx: use proper dev_* functions for driver messages
      spi: imx: drop fallback to PIO
      spi: imx: initialize usedma earlier
      spi: imx: drop unnecessary read/modify/write
      spi: imx: drop unncessary dma_is_inited variable
      spi: imx: remove unnecessary bit clearing in mx51_ecspi_config
      spi: imx: make some register defines simpler
      spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function
      spi: imx: drop bogus tests for rx/tx bufs in DMA transfer
      ARM: dts: imx6: Use correct SDMA script for SPI cores

 arch/arm/boot/dts/imx6qdl.dtsi |   8 +-
 drivers/spi/spi-imx.c          | 350 +++++++++++++++++++++--------------------
 2 files changed, 185 insertions(+), 173 deletions(-)

[PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA

[Sascha Hauer]

From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

RX DMA tail data handling doesn't work correctly in many cases with current
implementation. It happens because SPI core was setup to generates both RX
and RX TAIL events. And RX TAIL event does not work correctly.
This can be easily verified by sending SPI transaction with size modulus
WML(32 in our case) not equal 0.

Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90
since this change only fix usecases with transfer size from 33 to 128 bytes
and doesn't fix 129 bytes and bigger.

This is output from transaction with len 138 bytes in loopback mode at 10Mhz:
TX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2
TX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75
TX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95
TX0030: 5f 3c 35 b5 c4 8c dd 6c 11 32 3d e2 b4 b4 59 cf
TX0040: ce 23 3d 27 df a7 f9 96 fc 1e e0 66 2c 0e 7b 8c
TX0050: ca 30 42 8f bc 9f 7b ce d1 b8 b1 87 ec 8a d6 bb
TX0060: 2e 15 63 0e 3c dc a4 3a 7a 06 20 a7 93 1b 34 dd
TX0070: 4c f5 ec 88 96 68 d6 68 a0 09 6f 8e 93 47 c9 41
TX0080: db ac cf 97 89 f3 51 05 79 71

RX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2
RX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75
RX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95
RX0030: 5f 3c 35 00 00 b5 00 00 00 c4 00 00 8c 00 00 dd
RX0040: 6c 11 32 3d e2 b4 b4 59 cf ce 23 3d 27 df a7 f9
RX0050: 96 fc 1e e0 66 2c 0e 7b 8c ca 30 42 8f 1f 1f bc
RX0060: 9f 7b ce d1 b8 b1 87 ec 8a d6 bb 2e 15 63 0e ed
RX0070: ed 3c 58 58 58 dc 3d 3d a4 6a 6a 3a 52 52 7a 36
RX0080: 06 20 a7 93 1b 34 dd 4c f5 ec

Zeros at offset 33 and 34 caused by reading empty RX FIFO which not possible
if DMA RX read was triggered by RX event. This mean DMA was triggered
by RX TAIL event.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off--by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index d98c33c..08492d6 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -204,8 +204,8 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 
-	if (spi_imx->dma_is_inited &&
-	    transfer->len > spi_imx->wml * sizeof(u32))
+	if (spi_imx->dma_is_inited && transfer->len >= spi_imx->wml &&
+	    (transfer->len % spi_imx->wml) == 0)
 		return true;
 	return false;
 }
@@ -919,8 +919,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
 	int ret;
 	unsigned long timeout;
-	u32 dma;
-	int left;
 	struct spi_master *master = spi_imx->bitbang.master;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
 
@@ -954,13 +952,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	/* Trigger the cspi module. */
 	spi_imx->dma_finished = 0;
 
-	dma = readl(spi_imx->base + MX51_ECSPI_DMA);
-	dma = dma & (~MX51_ECSPI_DMA_RXT_WML_MASK);
-	/* Change RX_DMA_LENGTH trigger dma fetch tail data */
-	left = transfer->len % spi_imx->wml;
-	if (left)
-		writel(dma | (left << MX51_ECSPI_DMA_RXT_WML_OFFSET),
-				spi_imx->base + MX51_ECSPI_DMA);
 	/*
 	 * Set these order to avoid potential RX overflow. The overflow may
 	 * happen if we enable SPI HW before starting RX DMA due to rescheduling
@@ -992,10 +983,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 			spi_imx->devtype_data->reset(spi_imx);
 			dmaengine_terminate_all(master->dma_rx);
 		}
-		dma &= ~MX51_ECSPI_DMA_RXT_WML_MASK;
-		writel(dma |
-		       spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET,
-		       spi_imx->base + MX51_ECSPI_DMA);
 	}
 
 	spi_imx->dma_finished = 1;
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA

[Sascha Hauer]

From: Anton Bondarenko <anton.bondarenko.sama@gmail.com>

RX DMA tail data handling doesn't work correctly in many cases with current
implementation. It happens because SPI core was setup to generates both RX
and RX TAIL events. And RX TAIL event does not work correctly.
This can be easily verified by sending SPI transaction with size modulus
WML(32 in our case) not equal 0.

Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90
since this change only fix usecases with transfer size from 33 to 128 bytes
and doesn't fix 129 bytes and bigger.

This is output from transaction with len 138 bytes in loopback mode at 10Mhz:
TX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2
TX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75
TX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95
TX0030: 5f 3c 35 b5 c4 8c dd 6c 11 32 3d e2 b4 b4 59 cf
TX0040: ce 23 3d 27 df a7 f9 96 fc 1e e0 66 2c 0e 7b 8c
TX0050: ca 30 42 8f bc 9f 7b ce d1 b8 b1 87 ec 8a d6 bb
TX0060: 2e 15 63 0e 3c dc a4 3a 7a 06 20 a7 93 1b 34 dd
TX0070: 4c f5 ec 88 96 68 d6 68 a0 09 6f 8e 93 47 c9 41
TX0080: db ac cf 97 89 f3 51 05 79 71

RX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2
RX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75
RX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95
RX0030: 5f 3c 35 00 00 b5 00 00 00 c4 00 00 8c 00 00 dd
RX0040: 6c 11 32 3d e2 b4 b4 59 cf ce 23 3d 27 df a7 f9
RX0050: 96 fc 1e e0 66 2c 0e 7b 8c ca 30 42 8f 1f 1f bc
RX0060: 9f 7b ce d1 b8 b1 87 ec 8a d6 bb 2e 15 63 0e ed
RX0070: ed 3c 58 58 58 dc 3d 3d a4 6a 6a 3a 52 52 7a 36
RX0080: 06 20 a7 93 1b 34 dd 4c f5 ec

Zeros at offset 33 and 34 caused by reading empty RX FIFO which not possible
if DMA RX read was triggered by RX event. This mean DMA was triggered
by RX TAIL event.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off--by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index d98c33c..08492d6 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -204,8 +204,8 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 
-	if (spi_imx->dma_is_inited &&
-	    transfer->len > spi_imx->wml * sizeof(u32))
+	if (spi_imx->dma_is_inited && transfer->len >= spi_imx->wml &&
+	    (transfer->len % spi_imx->wml) == 0)
 		return true;
 	return false;
 }
@@ -919,8 +919,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
 	int ret;
 	unsigned long timeout;
-	u32 dma;
-	int left;
 	struct spi_master *master = spi_imx->bitbang.master;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
 
@@ -954,13 +952,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	/* Trigger the cspi module. */
 	spi_imx->dma_finished = 0;
 
-	dma = readl(spi_imx->base + MX51_ECSPI_DMA);
-	dma = dma & (~MX51_ECSPI_DMA_RXT_WML_MASK);
-	/* Change RX_DMA_LENGTH trigger dma fetch tail data */
-	left = transfer->len % spi_imx->wml;
-	if (left)
-		writel(dma | (left << MX51_ECSPI_DMA_RXT_WML_OFFSET),
-				spi_imx->base + MX51_ECSPI_DMA);
 	/*
 	 * Set these order to avoid potential RX overflow. The overflow may
 	 * happen if we enable SPI HW before starting RX DMA due to rescheduling
@@ -992,10 +983,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 			spi_imx->devtype_data->reset(spi_imx);
 			dmaengine_terminate_all(master->dma_rx);
 		}
-		dma &= ~MX51_ECSPI_DMA_RXT_WML_MASK;
-		writel(dma |
-		       spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET,
-		       spi_imx->base + MX51_ECSPI_DMA);
 	}
 
 	spi_imx->dma_finished = 1;
-- 
2.7.0

[PATCH 02/13] spi: imx: use proper dev_* functions for driver messages

[Sascha Hauer]

Add a struct device * member to the private driver data and use
it to print messages using dev_* functions rather than pr_*.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 08492d6..7904d45 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -86,6 +86,7 @@ struct spi_imx_devtype_data {
 
 struct spi_imx_data {
 	struct spi_bitbang bitbang;
+	struct device *dev;
 
 	struct completion xfer_done;
 	void __iomem *base;
@@ -250,14 +251,15 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_TESTREG_LBC	BIT(31)
 
 /* MX51 eCSPI */
-static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
-				      unsigned int *fres)
+static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
+				      unsigned int fspi, unsigned int *fres)
 {
 	/*
 	 * there are two 4-bit dividers, the pre-divider divides by
 	 * $pre, the post-divider by 2^$post
 	 */
 	unsigned int pre, post;
+	unsigned int fin = spi_imx->spi_clk;
 
 	if (unlikely(fspi > fin))
 		return 0;
@@ -270,14 +272,14 @@ static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
 
 	post = max(4U, post) - 4;
 	if (unlikely(post > 0xf)) {
-		pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
-				__func__, fspi, fin);
+		dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
+				fspi, fin);
 		return 0xff;
 	}
 
 	pre = DIV_ROUND_UP(fin, fspi << post) - 1;
 
-	pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+	dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
 			__func__, fin, fspi, post, pre);
 
 	/* Resulting frequency for the SCLK line. */
@@ -330,7 +332,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
 
 	/* set clock speed */
-	ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz, &clk);
+	ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
 
 	/* set chip select to use */
 	ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
@@ -968,18 +970,14 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
 						IMX_DMA_TIMEOUT);
 	if (!timeout) {
-		pr_warn("%s %s: I/O Error in DMA TX\n",
-			dev_driver_string(&master->dev),
-			dev_name(&master->dev));
+		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
 	} else {
 		timeout = wait_for_completion_timeout(
 				&spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT);
 		if (!timeout) {
-			pr_warn("%s %s: I/O Error in DMA RX\n",
-				dev_driver_string(&master->dev),
-				dev_name(&master->dev));
+			dev_err(spi_imx->dev, "I/O Error in DMA RX\n");
 			spi_imx->devtype_data->reset(spi_imx);
 			dmaengine_terminate_all(master->dma_rx);
 		}
@@ -996,9 +994,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	return ret;
 
 no_dma:
-	pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
-		     dev_driver_string(&master->dev),
-		     dev_name(&master->dev));
+	dev_warn_once(spi_imx->dev, "DMA not available, falling back to PIO\n");
 	return -EAGAIN;
 }
 
@@ -1128,6 +1124,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 
 	spi_imx = spi_master_get_devdata(master);
 	spi_imx->bitbang.master = master;
+	spi_imx->dev = &pdev->dev;
 
 	spi_imx->devtype_data = of_id ? of_id->data :
 		(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 02/13] spi: imx: use proper dev_* functions for driver messages

[Sascha Hauer]

Add a struct device * member to the private driver data and use
it to print messages using dev_* functions rather than pr_*.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 08492d6..7904d45 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -86,6 +86,7 @@ struct spi_imx_devtype_data {
 
 struct spi_imx_data {
 	struct spi_bitbang bitbang;
+	struct device *dev;
 
 	struct completion xfer_done;
 	void __iomem *base;
@@ -250,14 +251,15 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_TESTREG_LBC	BIT(31)
 
 /* MX51 eCSPI */
-static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
-				      unsigned int *fres)
+static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
+				      unsigned int fspi, unsigned int *fres)
 {
 	/*
 	 * there are two 4-bit dividers, the pre-divider divides by
 	 * $pre, the post-divider by 2^$post
 	 */
 	unsigned int pre, post;
+	unsigned int fin = spi_imx->spi_clk;
 
 	if (unlikely(fspi > fin))
 		return 0;
@@ -270,14 +272,14 @@ static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
 
 	post = max(4U, post) - 4;
 	if (unlikely(post > 0xf)) {
-		pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
-				__func__, fspi, fin);
+		dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
+				fspi, fin);
 		return 0xff;
 	}
 
 	pre = DIV_ROUND_UP(fin, fspi << post) - 1;
 
-	pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+	dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
 			__func__, fin, fspi, post, pre);
 
 	/* Resulting frequency for the SCLK line. */
@@ -330,7 +332,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
 
 	/* set clock speed */
-	ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz, &clk);
+	ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
 
 	/* set chip select to use */
 	ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
@@ -968,18 +970,14 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
 						IMX_DMA_TIMEOUT);
 	if (!timeout) {
-		pr_warn("%s %s: I/O Error in DMA TX\n",
-			dev_driver_string(&master->dev),
-			dev_name(&master->dev));
+		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
 	} else {
 		timeout = wait_for_completion_timeout(
 				&spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT);
 		if (!timeout) {
-			pr_warn("%s %s: I/O Error in DMA RX\n",
-				dev_driver_string(&master->dev),
-				dev_name(&master->dev));
+			dev_err(spi_imx->dev, "I/O Error in DMA RX\n");
 			spi_imx->devtype_data->reset(spi_imx);
 			dmaengine_terminate_all(master->dma_rx);
 		}
@@ -996,9 +994,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	return ret;
 
 no_dma:
-	pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
-		     dev_driver_string(&master->dev),
-		     dev_name(&master->dev));
+	dev_warn_once(spi_imx->dev, "DMA not available, falling back to PIO\n");
 	return -EAGAIN;
 }
 
@@ -1128,6 +1124,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 
 	spi_imx = spi_master_get_devdata(master);
 	spi_imx->bitbang.master = master;
+	spi_imx->dev = &pdev->dev;
 
 	spi_imx->devtype_data = of_id ? of_id->data :
 		(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
-- 
2.7.0

[PATCH 03/13] spi: imx: replace fixed timeout with calculated

[Sascha Hauer]

From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Fixed timeout value can fire while transaction is ongoing. This may happen
because there are no strict requirements on SPI transaction duration.
Dynamic timeout value is generated based on SCLK and transaction size.

There is also 4 * SCLK delay between TX bursts related to HW internal CS change.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/spi/spi-imx.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 7904d45..b277375 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -56,7 +56,6 @@
 
 /* The maximum  bytes that a sdma BD can transfer.*/
 #define MAX_SDMA_BD_BYTES  (1 << 15)
-#define IMX_DMA_TIMEOUT (msecs_to_jiffies(3000))
 struct spi_imx_config {
 	unsigned int speed_hz;
 	unsigned int bpw;
@@ -93,6 +92,7 @@ struct spi_imx_data {
 	struct clk *clk_per;
 	struct clk *clk_ipg;
 	unsigned long spi_clk;
+	unsigned int spi_bus_clk;
 
 	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
@@ -333,6 +333,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 
 	/* set clock speed */
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
+	spi_imx->spi_bus_clk = clk;
 
 	/* set chip select to use */
 	ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
@@ -915,11 +916,26 @@ static void spi_imx_dma_tx_callback(void *cookie)
 	complete(&spi_imx->dma_tx_completion);
 }
 
+static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
+{
+	unsigned long timeout = 0;
+
+	/* Time with actual data transfer and CS change delay related to HW */
+	timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
+
+	/* Add extra second for scheduler related activities */
+	timeout += 1;
+
+	/* Double calculated timeout */
+	return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
+}
+
 static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 				struct spi_transfer *transfer)
 {
 	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
 	int ret;
+	unsigned long transfer_timeout;
 	unsigned long timeout;
 	struct spi_master *master = spi_imx->bitbang.master;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
@@ -966,16 +982,18 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	dma_async_issue_pending(master->dma_tx);
 	spi_imx->devtype_data->trigger(spi_imx);
 
+	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
+
 	/* Wait SDMA to finish the data transfer.*/
 	timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
-						IMX_DMA_TIMEOUT);
+						transfer_timeout);
 	if (!timeout) {
 		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
 	} else {
 		timeout = wait_for_completion_timeout(
-				&spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT);
+				&spi_imx->dma_rx_completion, transfer_timeout);
 		if (!timeout) {
 			dev_err(spi_imx->dev, "I/O Error in DMA RX\n");
 			spi_imx->devtype_data->reset(spi_imx);
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 03/13] spi: imx: replace fixed timeout with calculated

[Sascha Hauer]

From: Anton Bondarenko <anton.bondarenko.sama@gmail.com>

Fixed timeout value can fire while transaction is ongoing. This may happen
because there are no strict requirements on SPI transaction duration.
Dynamic timeout value is generated based on SCLK and transaction size.

There is also 4 * SCLK delay between TX bursts related to HW internal CS change.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
---
 drivers/spi/spi-imx.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 7904d45..b277375 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -56,7 +56,6 @@
 
 /* The maximum  bytes that a sdma BD can transfer.*/
 #define MAX_SDMA_BD_BYTES  (1 << 15)
-#define IMX_DMA_TIMEOUT (msecs_to_jiffies(3000))
 struct spi_imx_config {
 	unsigned int speed_hz;
 	unsigned int bpw;
@@ -93,6 +92,7 @@ struct spi_imx_data {
 	struct clk *clk_per;
 	struct clk *clk_ipg;
 	unsigned long spi_clk;
+	unsigned int spi_bus_clk;
 
 	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
@@ -333,6 +333,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 
 	/* set clock speed */
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
+	spi_imx->spi_bus_clk = clk;
 
 	/* set chip select to use */
 	ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
@@ -915,11 +916,26 @@ static void spi_imx_dma_tx_callback(void *cookie)
 	complete(&spi_imx->dma_tx_completion);
 }
 
+static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
+{
+	unsigned long timeout = 0;
+
+	/* Time with actual data transfer and CS change delay related to HW */
+	timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
+
+	/* Add extra second for scheduler related activities */
+	timeout += 1;
+
+	/* Double calculated timeout */
+	return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
+}
+
 static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 				struct spi_transfer *transfer)
 {
 	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
 	int ret;
+	unsigned long transfer_timeout;
 	unsigned long timeout;
 	struct spi_master *master = spi_imx->bitbang.master;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
@@ -966,16 +982,18 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	dma_async_issue_pending(master->dma_tx);
 	spi_imx->devtype_data->trigger(spi_imx);
 
+	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
+
 	/* Wait SDMA to finish the data transfer.*/
 	timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
-						IMX_DMA_TIMEOUT);
+						transfer_timeout);
 	if (!timeout) {
 		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
 	} else {
 		timeout = wait_for_completion_timeout(
-				&spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT);
+				&spi_imx->dma_rx_completion, transfer_timeout);
 		if (!timeout) {
 			dev_err(spi_imx->dev, "I/O Error in DMA RX\n");
 			spi_imx->devtype_data->reset(spi_imx);
-- 
2.7.0

[PATCH 04/13] spi: imx: drop fallback to PIO

[Sascha Hauer]

At the moment the driver decides to fallback to PIO mode the buffers
are already mapped for DMA. It's a bug to access them with the CPU
afterwards, so we cannot just fallback to PIO mode.
It should not be necessary anyway, since we only use DMA when we
verified that it's possible in the fist place, so when prep_slave_sg
fails it's a bug, either in the SDMA driver or in the can_dma
implementation.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index b277375..5a48d07 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -945,7 +945,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					tx->sgl, tx->nents, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_tx)
-			goto no_dma;
+			return -EINVAL;
 
 		desc_tx->callback = spi_imx_dma_tx_callback;
 		desc_tx->callback_param = (void *)spi_imx;
@@ -957,7 +957,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					rx->sgl, rx->nents, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_rx)
-			goto no_dma;
+			return -EINVAL;
 
 		desc_rx->callback = spi_imx_dma_rx_callback;
 		desc_rx->callback_param = (void *)spi_imx;
@@ -1010,10 +1010,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		ret = transfer->len;
 
 	return ret;
-
-no_dma:
-	dev_warn_once(spi_imx->dev, "DMA not available, falling back to PIO\n");
-	return -EAGAIN;
 }
 
 static int spi_imx_pio_transfer(struct spi_device *spi,
@@ -1040,15 +1036,12 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
 static int spi_imx_transfer(struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
-	int ret;
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
 	if (spi_imx->bitbang.master->can_dma &&
 	    spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) {
 		spi_imx->usedma = true;
-		ret = spi_imx_dma_transfer(spi_imx, transfer);
-		if (ret != -EAGAIN)
-			return ret;
+		return spi_imx_dma_transfer(spi_imx, transfer);
 	}
 	spi_imx->usedma = false;
 
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 04/13] spi: imx: drop fallback to PIO

[Sascha Hauer]

At the moment the driver decides to fallback to PIO mode the buffers
are already mapped for DMA. It's a bug to access them with the CPU
afterwards, so we cannot just fallback to PIO mode.
It should not be necessary anyway, since we only use DMA when we
verified that it's possible in the fist place, so when prep_slave_sg
fails it's a bug, either in the SDMA driver or in the can_dma
implementation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index b277375..5a48d07 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -945,7 +945,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					tx->sgl, tx->nents, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_tx)
-			goto no_dma;
+			return -EINVAL;
 
 		desc_tx->callback = spi_imx_dma_tx_callback;
 		desc_tx->callback_param = (void *)spi_imx;
@@ -957,7 +957,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 					rx->sgl, rx->nents, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		if (!desc_rx)
-			goto no_dma;
+			return -EINVAL;
 
 		desc_rx->callback = spi_imx_dma_rx_callback;
 		desc_rx->callback_param = (void *)spi_imx;
@@ -1010,10 +1010,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		ret = transfer->len;
 
 	return ret;
-
-no_dma:
-	dev_warn_once(spi_imx->dev, "DMA not available, falling back to PIO\n");
-	return -EAGAIN;
 }
 
 static int spi_imx_pio_transfer(struct spi_device *spi,
@@ -1040,15 +1036,12 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
 static int spi_imx_transfer(struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
-	int ret;
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
 	if (spi_imx->bitbang.master->can_dma &&
 	    spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) {
 		spi_imx->usedma = true;
-		ret = spi_imx_dma_transfer(spi_imx, transfer);
-		if (ret != -EAGAIN)
-			return ret;
+		return spi_imx_dma_transfer(spi_imx, transfer);
 	}
 	spi_imx->usedma = false;
 
-- 
2.7.0

[PATCH 05/13] spi: imx: initialize usedma earlier

[Sascha Hauer]

So that the SoC specific config function can know if we will do
DMA or not. Will be needed in following patches.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 5a48d07..7047453 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -815,6 +815,11 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 		spi_imx->tx = spi_imx_buf_tx_u32;
 	}
 
+	if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
+		spi_imx->usedma = 1;
+	else
+		spi_imx->usedma = 0;
+
 	spi_imx->devtype_data->config(spi_imx, &config);
 
 	return 0;
@@ -1038,14 +1043,10 @@ static int spi_imx_transfer(struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
-	if (spi_imx->bitbang.master->can_dma &&
-	    spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) {
-		spi_imx->usedma = true;
+	if (spi_imx->usedma)
 		return spi_imx_dma_transfer(spi_imx, transfer);
-	}
-	spi_imx->usedma = false;
-
-	return spi_imx_pio_transfer(spi, transfer);
+	else
+		return spi_imx_pio_transfer(spi, transfer);
 }
 
 static int spi_imx_setup(struct spi_device *spi)
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 05/13] spi: imx: initialize usedma earlier

[Sascha Hauer]

So that the SoC specific config function can know if we will do
DMA or not. Will be needed in following patches.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 5a48d07..7047453 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -815,6 +815,11 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 		spi_imx->tx = spi_imx_buf_tx_u32;
 	}
 
+	if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
+		spi_imx->usedma = 1;
+	else
+		spi_imx->usedma = 0;
+
 	spi_imx->devtype_data->config(spi_imx, &config);
 
 	return 0;
@@ -1038,14 +1043,10 @@ static int spi_imx_transfer(struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
-	if (spi_imx->bitbang.master->can_dma &&
-	    spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) {
-		spi_imx->usedma = true;
+	if (spi_imx->usedma)
 		return spi_imx_dma_transfer(spi_imx, transfer);
-	}
-	spi_imx->usedma = false;
-
-	return spi_imx_pio_transfer(spi, transfer);
+	else
+		return spi_imx_pio_transfer(spi, transfer);
 }
 
 static int spi_imx_setup(struct spi_device *spi)
-- 
2.7.0

[PATCH 06/13] spi: imx: drop unnecessary read/modify/write

[Sascha Hauer]

When the MX51_ECSPI_DMA is configured we control every single bit
of the register, so there's no need to read/modify/write it. Instead
just write the value we want to have in the register. Also, drop
unnecessary check if we are actually doing DMA. The values written
to the register have no effect in PIO mode and value written there
during the last DMA transfer is still in the register, so we can
equally well always write a value.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 31 ++++++++++---------------------
 1 file changed, 10 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 7047453..073a134 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -240,9 +240,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_DMA_RXT_WML_OFFSET	24
 #define MX51_ECSPI_DMA_RXT_WML_MASK	(0x3F << 24)
 
-#define MX51_ECSPI_DMA_TEDEN_OFFSET	7
-#define MX51_ECSPI_DMA_RXDEN_OFFSET	23
-#define MX51_ECSPI_DMA_RXTDEN_OFFSET	31
+#define MX51_ECSPI_DMA_TEDEN		(1 << 7)
+#define MX51_ECSPI_DMA_RXDEN		(1 << 23)
+#define MX51_ECSPI_DMA_RXTDEN		(1 << 31)
 
 #define MX51_ECSPI_STAT		0x18
 #define MX51_ECSPI_STAT_RR		(1 <<  3)
@@ -318,8 +318,7 @@ static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 		struct spi_imx_config *config)
 {
-	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0, dma = 0;
-	u32 tx_wml_cfg, rx_wml_cfg, rxt_wml_cfg;
+	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0;
 	u32 clk = config->speed_hz, delay, reg;
 
 	/*
@@ -392,22 +391,12 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
-	if (spi_imx->dma_is_inited) {
-		dma = readl(spi_imx->base + MX51_ECSPI_DMA);
-
-		rx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
-		tx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
-		rxt_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET;
-		dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK
-			   & ~MX51_ECSPI_DMA_RX_WML_MASK
-			   & ~MX51_ECSPI_DMA_RXT_WML_MASK)
-			   | rx_wml_cfg | tx_wml_cfg | rxt_wml_cfg
-			   |(1 << MX51_ECSPI_DMA_TEDEN_OFFSET)
-			   |(1 << MX51_ECSPI_DMA_RXDEN_OFFSET)
-			   |(1 << MX51_ECSPI_DMA_RXTDEN_OFFSET);
-
-		writel(dma, spi_imx->base + MX51_ECSPI_DMA);
-	}
+
+	writel(spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET |
+		spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET |
+		spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET |
+		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
+		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
 
 	return 0;
 }
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 06/13] spi: imx: drop unnecessary read/modify/write

[Sascha Hauer]

When the MX51_ECSPI_DMA is configured we control every single bit
of the register, so there's no need to read/modify/write it. Instead
just write the value we want to have in the register. Also, drop
unnecessary check if we are actually doing DMA. The values written
to the register have no effect in PIO mode and value written there
during the last DMA transfer is still in the register, so we can
equally well always write a value.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 31 ++++++++++---------------------
 1 file changed, 10 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 7047453..073a134 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -240,9 +240,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_DMA_RXT_WML_OFFSET	24
 #define MX51_ECSPI_DMA_RXT_WML_MASK	(0x3F << 24)
 
-#define MX51_ECSPI_DMA_TEDEN_OFFSET	7
-#define MX51_ECSPI_DMA_RXDEN_OFFSET	23
-#define MX51_ECSPI_DMA_RXTDEN_OFFSET	31
+#define MX51_ECSPI_DMA_TEDEN		(1 << 7)
+#define MX51_ECSPI_DMA_RXDEN		(1 << 23)
+#define MX51_ECSPI_DMA_RXTDEN		(1 << 31)
 
 #define MX51_ECSPI_STAT		0x18
 #define MX51_ECSPI_STAT_RR		(1 <<  3)
@@ -318,8 +318,7 @@ static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 		struct spi_imx_config *config)
 {
-	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0, dma = 0;
-	u32 tx_wml_cfg, rx_wml_cfg, rxt_wml_cfg;
+	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0;
 	u32 clk = config->speed_hz, delay, reg;
 
 	/*
@@ -392,22 +391,12 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
-	if (spi_imx->dma_is_inited) {
-		dma = readl(spi_imx->base + MX51_ECSPI_DMA);
-
-		rx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
-		tx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
-		rxt_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET;
-		dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK
-			   & ~MX51_ECSPI_DMA_RX_WML_MASK
-			   & ~MX51_ECSPI_DMA_RXT_WML_MASK)
-			   | rx_wml_cfg | tx_wml_cfg | rxt_wml_cfg
-			   |(1 << MX51_ECSPI_DMA_TEDEN_OFFSET)
-			   |(1 << MX51_ECSPI_DMA_RXDEN_OFFSET)
-			   |(1 << MX51_ECSPI_DMA_RXTDEN_OFFSET);
-
-		writel(dma, spi_imx->base + MX51_ECSPI_DMA);
-	}
+
+	writel(spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET |
+		spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET |
+		spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET |
+		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
+		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
 
 	return 0;
 }
-- 
2.7.0

[PATCH 07/13] spi: imx: drop unncessary dma_is_inited variable

[Sascha Hauer]

There's no need for an extra dma_is_inited variable when we can
equally well check for the existence of a DMA channel.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 073a134..57b7af8 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -102,7 +102,6 @@ struct spi_imx_data {
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 
 	/* DMA */
-	unsigned int dma_is_inited;
 	unsigned int dma_finished;
 	bool usedma;
 	u32 wml;
@@ -205,7 +204,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 
-	if (spi_imx->dma_is_inited && transfer->len >= spi_imx->wml &&
+	if (master->dma_rx && transfer->len >= spi_imx->wml &&
 	    (transfer->len % spi_imx->wml) == 0)
 		return true;
 	return false;
@@ -827,8 +826,6 @@ static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
 		dma_release_channel(master->dma_tx);
 		master->dma_tx = NULL;
 	}
-
-	spi_imx->dma_is_inited = 0;
 }
 
 static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
@@ -888,7 +885,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 	master->max_dma_len = MAX_SDMA_BD_BYTES;
 	spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
 					 SPI_MASTER_MUST_TX;
-	spi_imx->dma_is_inited = 1;
 
 	return 0;
 err:
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 07/13] spi: imx: drop unncessary dma_is_inited variable

[Sascha Hauer]

There's no need for an extra dma_is_inited variable when we can
equally well check for the existence of a DMA channel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 073a134..57b7af8 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -102,7 +102,6 @@ struct spi_imx_data {
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 
 	/* DMA */
-	unsigned int dma_is_inited;
 	unsigned int dma_finished;
 	bool usedma;
 	u32 wml;
@@ -205,7 +204,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 
-	if (spi_imx->dma_is_inited && transfer->len >= spi_imx->wml &&
+	if (master->dma_rx && transfer->len >= spi_imx->wml &&
 	    (transfer->len % spi_imx->wml) == 0)
 		return true;
 	return false;
@@ -827,8 +826,6 @@ static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
 		dma_release_channel(master->dma_tx);
 		master->dma_tx = NULL;
 	}
-
-	spi_imx->dma_is_inited = 0;
 }
 
 static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
@@ -888,7 +885,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 	master->max_dma_len = MAX_SDMA_BD_BYTES;
 	spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
 					 SPI_MASTER_MUST_TX;
-	spi_imx->dma_is_inited = 1;
 
 	return 0;
 err:
-- 
2.7.0

[PATCH 08/13] spi: imx: add support for all SPI word width for DMA

[Sascha Hauer]

From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

DMA transfer for SPI was limited to up to 8 bits word size until now.
Sync in SPI burst size and DMA bus width is necessary to correctly
support 16 and 32 BPW.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 118 ++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 91 insertions(+), 27 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 57b7af8..6a0e004 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -89,11 +89,15 @@ struct spi_imx_data {
 
 	struct completion xfer_done;
 	void __iomem *base;
+	unsigned long base_phys;
+
 	struct clk *clk_per;
 	struct clk *clk_ipg;
 	unsigned long spi_clk;
 	unsigned int spi_bus_clk;
 
+	unsigned int bytes_per_word;
+
 	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
 	void (*rx)(struct spi_imx_data *);
@@ -199,15 +203,35 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
 	return 7;
 }
 
+static int spi_imx_bytes_per_word(const int bpw)
+{
+	return DIV_ROUND_UP(bpw, BITS_PER_BYTE);
+}
+
 static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 			 struct spi_transfer *transfer)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+	unsigned int bpw = transfer->bits_per_word;
+
+	if (!master->dma_rx)
+		return false;
+
+	if (!bpw)
+		bpw = spi->bits_per_word;
+
+	bpw = spi_imx_bytes_per_word(bpw);
+
+	if (bpw != 1 && bpw != 2 && bpw != 4)
+		return false;
+
+	if (transfer->len < spi_imx->wml * bpw)
+		return false;
+
+	if (transfer->len % (spi_imx->wml * bpw))
+		return false;
 
-	if (master->dma_rx && transfer->len >= spi_imx->wml &&
-	    (transfer->len % spi_imx->wml) == 0)
-		return true;
-	return false;
+	return true;
 }
 
 #define MX51_ECSPI_CTRL		0x08
@@ -775,11 +799,63 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int spi_imx_dma_configure(struct spi_master *master,
+				 int bytes_per_word)
+{
+	int ret;
+	enum dma_slave_buswidth buswidth;
+	struct dma_slave_config rx = {}, tx = {};
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+
+	if (bytes_per_word == spi_imx->bytes_per_word)
+		/* Same as last time */
+		return 0;
+
+	switch (bytes_per_word) {
+	case 4:
+		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
+	case 2:
+		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		break;
+	case 1:
+		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	tx.direction = DMA_MEM_TO_DEV;
+	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
+	tx.dst_addr_width = buswidth;
+	tx.dst_maxburst = spi_imx->wml;
+	ret = dmaengine_slave_config(master->dma_tx, &tx);
+	if (ret) {
+		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
+		return ret;
+	}
+
+	rx.direction = DMA_DEV_TO_MEM;
+	rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
+	rx.src_addr_width = buswidth;
+	rx.src_maxburst = spi_imx->wml;
+	ret = dmaengine_slave_config(master->dma_rx, &rx);
+	if (ret) {
+		dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
+		return ret;
+	}
+
+	spi_imx->bytes_per_word = bytes_per_word;
+
+	return 0;
+}
+
 static int spi_imx_setupxfer(struct spi_device *spi,
 				 struct spi_transfer *t)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 	struct spi_imx_config config;
+	int ret;
 
 	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
 	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
@@ -808,6 +884,13 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	else
 		spi_imx->usedma = 0;
 
+	if (spi_imx->usedma) {
+		ret = spi_imx_dma_configure(spi->master,
+					    spi_imx_bytes_per_word(config.bpw));
+		if (ret)
+			return ret;
+	}
+
 	spi_imx->devtype_data->config(spi_imx, &config);
 
 	return 0;
@@ -829,10 +912,8 @@ static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
 }
 
 static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
-			     struct spi_master *master,
-			     const struct resource *res)
+			     struct spi_master *master)
 {
-	struct dma_slave_config slave_config = {};
 	int ret;
 
 	/* use pio mode for i.mx6dl chip TKT238285 */
@@ -850,16 +931,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 		goto err;
 	}
 
-	slave_config.direction = DMA_MEM_TO_DEV;
-	slave_config.dst_addr = res->start + MXC_CSPITXDATA;
-	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	slave_config.dst_maxburst = spi_imx->wml;
-	ret = dmaengine_slave_config(master->dma_tx, &slave_config);
-	if (ret) {
-		dev_err(dev, "error in TX dma configuration.\n");
-		goto err;
-	}
-
 	/* Prepare for RX : */
 	master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
 	if (IS_ERR(master->dma_rx)) {
@@ -869,15 +940,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 		goto err;
 	}
 
-	slave_config.direction = DMA_DEV_TO_MEM;
-	slave_config.src_addr = res->start + MXC_CSPIRXDATA;
-	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	slave_config.src_maxburst = spi_imx->wml;
-	ret = dmaengine_slave_config(master->dma_rx, &slave_config);
-	if (ret) {
-		dev_err(dev, "error in RX dma configuration.\n");
-		goto err;
-	}
+	spi_imx_dma_configure(master, 1);
 
 	init_completion(&spi_imx->dma_rx_completion);
 	init_completion(&spi_imx->dma_tx_completion);
@@ -1162,6 +1225,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 		ret = PTR_ERR(spi_imx->base);
 		goto out_master_put;
 	}
+	spi_imx->base_phys = res->start;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -1202,7 +1266,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 	 * other chips.
 	 */
 	if (is_imx51_ecspi(spi_imx)) {
-		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master, res);
+		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
 		if (ret == -EPROBE_DEFER)
 			goto out_clk_put;
 
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 08/13] spi: imx: add support for all SPI word width for DMA

[Sascha Hauer]

From: Anton Bondarenko <anton.bondarenko.sama@gmail.com>

DMA transfer for SPI was limited to up to 8 bits word size until now.
Sync in SPI burst size and DMA bus width is necessary to correctly
support 16 and 32 BPW.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 118 ++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 91 insertions(+), 27 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 57b7af8..6a0e004 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -89,11 +89,15 @@ struct spi_imx_data {
 
 	struct completion xfer_done;
 	void __iomem *base;
+	unsigned long base_phys;
+
 	struct clk *clk_per;
 	struct clk *clk_ipg;
 	unsigned long spi_clk;
 	unsigned int spi_bus_clk;
 
+	unsigned int bytes_per_word;
+
 	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
 	void (*rx)(struct spi_imx_data *);
@@ -199,15 +203,35 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
 	return 7;
 }
 
+static int spi_imx_bytes_per_word(const int bpw)
+{
+	return DIV_ROUND_UP(bpw, BITS_PER_BYTE);
+}
+
 static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 			 struct spi_transfer *transfer)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+	unsigned int bpw = transfer->bits_per_word;
+
+	if (!master->dma_rx)
+		return false;
+
+	if (!bpw)
+		bpw = spi->bits_per_word;
+
+	bpw = spi_imx_bytes_per_word(bpw);
+
+	if (bpw != 1 && bpw != 2 && bpw != 4)
+		return false;
+
+	if (transfer->len < spi_imx->wml * bpw)
+		return false;
+
+	if (transfer->len % (spi_imx->wml * bpw))
+		return false;
 
-	if (master->dma_rx && transfer->len >= spi_imx->wml &&
-	    (transfer->len % spi_imx->wml) == 0)
-		return true;
-	return false;
+	return true;
 }
 
 #define MX51_ECSPI_CTRL		0x08
@@ -775,11 +799,63 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int spi_imx_dma_configure(struct spi_master *master,
+				 int bytes_per_word)
+{
+	int ret;
+	enum dma_slave_buswidth buswidth;
+	struct dma_slave_config rx = {}, tx = {};
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+
+	if (bytes_per_word == spi_imx->bytes_per_word)
+		/* Same as last time */
+		return 0;
+
+	switch (bytes_per_word) {
+	case 4:
+		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
+	case 2:
+		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		break;
+	case 1:
+		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	tx.direction = DMA_MEM_TO_DEV;
+	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
+	tx.dst_addr_width = buswidth;
+	tx.dst_maxburst = spi_imx->wml;
+	ret = dmaengine_slave_config(master->dma_tx, &tx);
+	if (ret) {
+		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
+		return ret;
+	}
+
+	rx.direction = DMA_DEV_TO_MEM;
+	rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
+	rx.src_addr_width = buswidth;
+	rx.src_maxburst = spi_imx->wml;
+	ret = dmaengine_slave_config(master->dma_rx, &rx);
+	if (ret) {
+		dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
+		return ret;
+	}
+
+	spi_imx->bytes_per_word = bytes_per_word;
+
+	return 0;
+}
+
 static int spi_imx_setupxfer(struct spi_device *spi,
 				 struct spi_transfer *t)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 	struct spi_imx_config config;
+	int ret;
 
 	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
 	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
@@ -808,6 +884,13 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	else
 		spi_imx->usedma = 0;
 
+	if (spi_imx->usedma) {
+		ret = spi_imx_dma_configure(spi->master,
+					    spi_imx_bytes_per_word(config.bpw));
+		if (ret)
+			return ret;
+	}
+
 	spi_imx->devtype_data->config(spi_imx, &config);
 
 	return 0;
@@ -829,10 +912,8 @@ static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
 }
 
 static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
-			     struct spi_master *master,
-			     const struct resource *res)
+			     struct spi_master *master)
 {
-	struct dma_slave_config slave_config = {};
 	int ret;
 
 	/* use pio mode for i.mx6dl chip TKT238285 */
@@ -850,16 +931,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 		goto err;
 	}
 
-	slave_config.direction = DMA_MEM_TO_DEV;
-	slave_config.dst_addr = res->start + MXC_CSPITXDATA;
-	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	slave_config.dst_maxburst = spi_imx->wml;
-	ret = dmaengine_slave_config(master->dma_tx, &slave_config);
-	if (ret) {
-		dev_err(dev, "error in TX dma configuration.\n");
-		goto err;
-	}
-
 	/* Prepare for RX : */
 	master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
 	if (IS_ERR(master->dma_rx)) {
@@ -869,15 +940,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 		goto err;
 	}
 
-	slave_config.direction = DMA_DEV_TO_MEM;
-	slave_config.src_addr = res->start + MXC_CSPIRXDATA;
-	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	slave_config.src_maxburst = spi_imx->wml;
-	ret = dmaengine_slave_config(master->dma_rx, &slave_config);
-	if (ret) {
-		dev_err(dev, "error in RX dma configuration.\n");
-		goto err;
-	}
+	spi_imx_dma_configure(master, 1);
 
 	init_completion(&spi_imx->dma_rx_completion);
 	init_completion(&spi_imx->dma_tx_completion);
@@ -1162,6 +1225,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 		ret = PTR_ERR(spi_imx->base);
 		goto out_master_put;
 	}
+	spi_imx->base_phys = res->start;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -1202,7 +1266,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 	 * other chips.
 	 */
 	if (is_imx51_ecspi(spi_imx)) {
-		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master, res);
+		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
 		if (ret == -EPROBE_DEFER)
 			goto out_clk_put;
 
-- 
2.7.0

[PATCH 09/13] spi: imx: remove unnecessary bit clearing in mx51_ecspi_config

[Sascha Hauer]

This reverts patch:

| commit 1476253cef9dbfc1f7f6a1bd19252ca528cd63bd
| Author: Andrew Y. Kuksov <qxovxp-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
| Date:   Tue Jul 14 16:23:25 2015 +0300
|
|     spi: imx: fix ecspi mode setup

The patch tried to fix something by clearing bits in the cfg variable,
but cfg is initialized to zero on function entry. There are no bits to
clear.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 6a0e004..2476de7 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -366,20 +366,13 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 
 	if (config->mode & SPI_CPHA)
 		cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
-	else
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
 
 	if (config->mode & SPI_CPOL) {
 		cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
 		cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
-	} else {
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
 	}
 	if (config->mode & SPI_CS_HIGH)
 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
-	else
-		cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs);
 
 	/* CTRL register always go first to bring out controller from reset */
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 09/13] spi: imx: remove unnecessary bit clearing in mx51_ecspi_config

[Sascha Hauer]

This reverts patch:

| commit 1476253cef9dbfc1f7f6a1bd19252ca528cd63bd
| Author: Andrew Y. Kuksov <qxovxp@gmail.com>
| Date:   Tue Jul 14 16:23:25 2015 +0300
|
|     spi: imx: fix ecspi mode setup

The patch tried to fix something by clearing bits in the cfg variable,
but cfg is initialized to zero on function entry. There are no bits to
clear.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 6a0e004..2476de7 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -366,20 +366,13 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 
 	if (config->mode & SPI_CPHA)
 		cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
-	else
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
 
 	if (config->mode & SPI_CPOL) {
 		cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
 		cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
-	} else {
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
 	}
 	if (config->mode & SPI_CS_HIGH)
 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
-	else
-		cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs);
 
 	/* CTRL register always go first to bring out controller from reset */
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
-- 
2.7.0

[PATCH 10/13] spi: imx: make some register defines simpler

[Sascha Hauer]

The watermark levels in the DMA register are write only, the driver
should never have to read them back from the hardware. Replace the
current _MASK and _OFFSET defines with defines taking the watermark
level directly.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 2476de7..dee5e28 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -256,12 +256,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_INT_RREN		(1 <<  3)
 
 #define MX51_ECSPI_DMA      0x14
-#define MX51_ECSPI_DMA_TX_WML_OFFSET	0
-#define MX51_ECSPI_DMA_TX_WML_MASK	0x3F
-#define MX51_ECSPI_DMA_RX_WML_OFFSET	16
-#define MX51_ECSPI_DMA_RX_WML_MASK	(0x3F << 16)
-#define MX51_ECSPI_DMA_RXT_WML_OFFSET	24
-#define MX51_ECSPI_DMA_RXT_WML_MASK	(0x3F << 24)
+#define MX51_ECSPI_DMA_TX_WML(wml)	((wml) & 0x3f)
+#define MX51_ECSPI_DMA_RX_WML(wml)	(((wml) & 0x3f) << 16)
+#define MX51_ECSPI_DMA_RXT_WML(wml)	(((wml) & 0x3f) << 24)
 
 #define MX51_ECSPI_DMA_TEDEN		(1 << 7)
 #define MX51_ECSPI_DMA_RXDEN		(1 << 23)
@@ -408,9 +405,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	 * and enable DMA request.
 	 */
 
-	writel(spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET |
-		spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET |
-		spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET |
+	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
 
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 10/13] spi: imx: make some register defines simpler

[Sascha Hauer]

The watermark levels in the DMA register are write only, the driver
should never have to read them back from the hardware. Replace the
current _MASK and _OFFSET defines with defines taking the watermark
level directly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 2476de7..dee5e28 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -256,12 +256,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_INT_RREN		(1 <<  3)
 
 #define MX51_ECSPI_DMA      0x14
-#define MX51_ECSPI_DMA_TX_WML_OFFSET	0
-#define MX51_ECSPI_DMA_TX_WML_MASK	0x3F
-#define MX51_ECSPI_DMA_RX_WML_OFFSET	16
-#define MX51_ECSPI_DMA_RX_WML_MASK	(0x3F << 16)
-#define MX51_ECSPI_DMA_RXT_WML_OFFSET	24
-#define MX51_ECSPI_DMA_RXT_WML_MASK	(0x3F << 24)
+#define MX51_ECSPI_DMA_TX_WML(wml)	((wml) & 0x3f)
+#define MX51_ECSPI_DMA_RX_WML(wml)	(((wml) & 0x3f) << 16)
+#define MX51_ECSPI_DMA_RXT_WML(wml)	(((wml) & 0x3f) << 24)
 
 #define MX51_ECSPI_DMA_TEDEN		(1 << 7)
 #define MX51_ECSPI_DMA_RXDEN		(1 << 23)
@@ -408,9 +405,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	 * and enable DMA request.
 	 */
 
-	writel(spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET |
-		spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET |
-		spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET |
+	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
 
-- 
2.7.0

[PATCH 11/13] spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function

[Sascha Hauer]

Now that the config function knows whether we are doing DMA or not we
can do the necessary register setup in the config function and no longer
have to do this in the trigger function. With this the trigger function
becomes a no-op for DMA, so instead of testing if we are doing DMA or
not in the trigger function we simply no longer call it in the DMA case.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index dee5e28..3512c2f 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -106,7 +106,6 @@ struct spi_imx_data {
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 
 	/* DMA */
-	unsigned int dma_finished;
 	bool usedma;
 	u32 wml;
 	struct completion dma_rx_completion;
@@ -324,14 +323,10 @@ static void __maybe_unused mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int
 
 static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 {
-	u32 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+	u32 reg;
 
-	if (!spi_imx->usedma)
-		reg |= MX51_ECSPI_CTRL_XCH;
-	else if (!spi_imx->dma_finished)
-		reg |= MX51_ECSPI_CTRL_SMC;
-	else
-		reg &= ~MX51_ECSPI_CTRL_SMC;
+	reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+	reg |= MX51_ECSPI_CTRL_XCH;
 	writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
 }
 
@@ -371,6 +366,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	if (config->mode & SPI_CS_HIGH)
 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
 
+	if (spi_imx->usedma)
+		ctrl |= MX51_ECSPI_CTRL_SMC;
+
 	/* CTRL register always go first to bring out controller from reset */
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -1010,9 +1008,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	reinit_completion(&spi_imx->dma_rx_completion);
 	reinit_completion(&spi_imx->dma_tx_completion);
 
-	/* Trigger the cspi module. */
-	spi_imx->dma_finished = 0;
-
 	/*
 	 * Set these order to avoid potential RX overflow. The overflow may
 	 * happen if we enable SPI HW before starting RX DMA due to rescheduling
@@ -1023,7 +1018,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	 */
 	dma_async_issue_pending(master->dma_rx);
 	dma_async_issue_pending(master->dma_tx);
-	spi_imx->devtype_data->trigger(spi_imx);
 
 	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
 
@@ -1044,9 +1038,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		}
 	}
 
-	spi_imx->dma_finished = 1;
-	spi_imx->devtype_data->trigger(spi_imx);
-
 	if (!timeout)
 		ret = -ETIMEDOUT;
 	else
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 11/13] spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function

[Sascha Hauer]

Now that the config function knows whether we are doing DMA or not we
can do the necessary register setup in the config function and no longer
have to do this in the trigger function. With this the trigger function
becomes a no-op for DMA, so instead of testing if we are doing DMA or
not in the trigger function we simply no longer call it in the DMA case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index dee5e28..3512c2f 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -106,7 +106,6 @@ struct spi_imx_data {
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 
 	/* DMA */
-	unsigned int dma_finished;
 	bool usedma;
 	u32 wml;
 	struct completion dma_rx_completion;
@@ -324,14 +323,10 @@ static void __maybe_unused mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int
 
 static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 {
-	u32 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+	u32 reg;
 
-	if (!spi_imx->usedma)
-		reg |= MX51_ECSPI_CTRL_XCH;
-	else if (!spi_imx->dma_finished)
-		reg |= MX51_ECSPI_CTRL_SMC;
-	else
-		reg &= ~MX51_ECSPI_CTRL_SMC;
+	reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+	reg |= MX51_ECSPI_CTRL_XCH;
 	writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
 }
 
@@ -371,6 +366,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	if (config->mode & SPI_CS_HIGH)
 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
 
+	if (spi_imx->usedma)
+		ctrl |= MX51_ECSPI_CTRL_SMC;
+
 	/* CTRL register always go first to bring out controller from reset */
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -1010,9 +1008,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	reinit_completion(&spi_imx->dma_rx_completion);
 	reinit_completion(&spi_imx->dma_tx_completion);
 
-	/* Trigger the cspi module. */
-	spi_imx->dma_finished = 0;
-
 	/*
 	 * Set these order to avoid potential RX overflow. The overflow may
 	 * happen if we enable SPI HW before starting RX DMA due to rescheduling
@@ -1023,7 +1018,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	 */
 	dma_async_issue_pending(master->dma_rx);
 	dma_async_issue_pending(master->dma_tx);
-	spi_imx->devtype_data->trigger(spi_imx);
 
 	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
 
@@ -1044,9 +1038,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		}
 	}
 
-	spi_imx->dma_finished = 1;
-	spi_imx->devtype_data->trigger(spi_imx);
-
 	if (!timeout)
 		ret = -ETIMEDOUT;
 	else
-- 
2.7.0

[PATCH 12/13] spi: imx: drop bogus tests for rx/tx bufs in DMA transfer

[Sascha Hauer]

The driver tries to be clever by only setting up DMA channels when
the corresponding sg tables are non NULL. The sg tables are embedded
structs in struct spi_transfer, so they are guaranteed to be non NULL
which makes the if(tx)/if(rx) tests completely bogus. The driver even
sets the SPI_MASTER_MUST_RX / SPI_MASTER_MUST_TX flags which makes sure
the sg tables are not only present but also non empty.
Drop the tests and make the DMA path easier to follow.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/spi/spi-imx.c | 78 +++++++++++++++++++++------------------------------
 1 file changed, 32 insertions(+), 46 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 3512c2f..9fc1de0 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -975,48 +975,37 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 				struct spi_transfer *transfer)
 {
 	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
-	int ret;
 	unsigned long transfer_timeout;
 	unsigned long timeout;
 	struct spi_master *master = spi_imx->bitbang.master;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
 
-	if (tx) {
-		desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
-					tx->sgl, tx->nents, DMA_MEM_TO_DEV,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-		if (!desc_tx)
-			return -EINVAL;
-
-		desc_tx->callback = spi_imx_dma_tx_callback;
-		desc_tx->callback_param = (void *)spi_imx;
-		dmaengine_submit(desc_tx);
-	}
+	/*
+	 * The TX DMA setup starts the transfer, so make sure RX is configured
+	 * before TX.
+	 */
+	desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
+				rx->sgl, rx->nents, DMA_DEV_TO_MEM,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc_rx)
+		return -EINVAL;
 
-	if (rx) {
-		desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
-					rx->sgl, rx->nents, DMA_DEV_TO_MEM,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-		if (!desc_rx)
-			return -EINVAL;
+	desc_rx->callback = spi_imx_dma_rx_callback;
+	desc_rx->callback_param = (void *)spi_imx;
+	dmaengine_submit(desc_rx);
+	reinit_completion(&spi_imx->dma_rx_completion);
+	dma_async_issue_pending(master->dma_rx);
 
-		desc_rx->callback = spi_imx_dma_rx_callback;
-		desc_rx->callback_param = (void *)spi_imx;
-		dmaengine_submit(desc_rx);
-	}
+	desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
+				tx->sgl, tx->nents, DMA_MEM_TO_DEV,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc_tx)
+		return -EINVAL;
 
-	reinit_completion(&spi_imx->dma_rx_completion);
+	desc_tx->callback = spi_imx_dma_tx_callback;
+	desc_tx->callback_param = (void *)spi_imx;
+	dmaengine_submit(desc_tx);
 	reinit_completion(&spi_imx->dma_tx_completion);
-
-	/*
-	 * Set these order to avoid potential RX overflow. The overflow may
-	 * happen if we enable SPI HW before starting RX DMA due to rescheduling
-	 * for another task and/or interrupt.
-	 * So RX DMA enabled first to make sure data would be read out from FIFO
-	 * ASAP. TX DMA enabled next to start filling TX FIFO with new data.
-	 * And finaly SPI HW enabled to start actual data transfer.
-	 */
-	dma_async_issue_pending(master->dma_rx);
 	dma_async_issue_pending(master->dma_tx);
 
 	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
@@ -1028,22 +1017,19 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
-	} else {
-		timeout = wait_for_completion_timeout(
-				&spi_imx->dma_rx_completion, transfer_timeout);
-		if (!timeout) {
-			dev_err(spi_imx->dev, "I/O Error in DMA RX\n");
-			spi_imx->devtype_data->reset(spi_imx);
-			dmaengine_terminate_all(master->dma_rx);
-		}
+		return -ETIMEDOUT;
 	}
 
-	if (!timeout)
-		ret = -ETIMEDOUT;
-	else
-		ret = transfer->len;
+	timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
+					      transfer_timeout);
+	if (!timeout) {
+		dev_err(&master->dev, "I/O Error in DMA RX\n");
+		spi_imx->devtype_data->reset(spi_imx);
+		dmaengine_terminate_all(master->dma_rx);
+		return -ETIMEDOUT;
+	}
 
-	return ret;
+	return transfer->len;
 }
 
 static int spi_imx_pio_transfer(struct spi_device *spi,
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 12/13] spi: imx: drop bogus tests for rx/tx bufs in DMA transfer

[Sascha Hauer]

The driver tries to be clever by only setting up DMA channels when
the corresponding sg tables are non NULL. The sg tables are embedded
structs in struct spi_transfer, so they are guaranteed to be non NULL
which makes the if(tx)/if(rx) tests completely bogus. The driver even
sets the SPI_MASTER_MUST_RX / SPI_MASTER_MUST_TX flags which makes sure
the sg tables are not only present but also non empty.
Drop the tests and make the DMA path easier to follow.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/spi/spi-imx.c | 78 +++++++++++++++++++++------------------------------
 1 file changed, 32 insertions(+), 46 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 3512c2f..9fc1de0 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -975,48 +975,37 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 				struct spi_transfer *transfer)
 {
 	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
-	int ret;
 	unsigned long transfer_timeout;
 	unsigned long timeout;
 	struct spi_master *master = spi_imx->bitbang.master;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
 
-	if (tx) {
-		desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
-					tx->sgl, tx->nents, DMA_MEM_TO_DEV,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-		if (!desc_tx)
-			return -EINVAL;
-
-		desc_tx->callback = spi_imx_dma_tx_callback;
-		desc_tx->callback_param = (void *)spi_imx;
-		dmaengine_submit(desc_tx);
-	}
+	/*
+	 * The TX DMA setup starts the transfer, so make sure RX is configured
+	 * before TX.
+	 */
+	desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
+				rx->sgl, rx->nents, DMA_DEV_TO_MEM,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc_rx)
+		return -EINVAL;
 
-	if (rx) {
-		desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
-					rx->sgl, rx->nents, DMA_DEV_TO_MEM,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-		if (!desc_rx)
-			return -EINVAL;
+	desc_rx->callback = spi_imx_dma_rx_callback;
+	desc_rx->callback_param = (void *)spi_imx;
+	dmaengine_submit(desc_rx);
+	reinit_completion(&spi_imx->dma_rx_completion);
+	dma_async_issue_pending(master->dma_rx);
 
-		desc_rx->callback = spi_imx_dma_rx_callback;
-		desc_rx->callback_param = (void *)spi_imx;
-		dmaengine_submit(desc_rx);
-	}
+	desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
+				tx->sgl, tx->nents, DMA_MEM_TO_DEV,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc_tx)
+		return -EINVAL;
 
-	reinit_completion(&spi_imx->dma_rx_completion);
+	desc_tx->callback = spi_imx_dma_tx_callback;
+	desc_tx->callback_param = (void *)spi_imx;
+	dmaengine_submit(desc_tx);
 	reinit_completion(&spi_imx->dma_tx_completion);
-
-	/*
-	 * Set these order to avoid potential RX overflow. The overflow may
-	 * happen if we enable SPI HW before starting RX DMA due to rescheduling
-	 * for another task and/or interrupt.
-	 * So RX DMA enabled first to make sure data would be read out from FIFO
-	 * ASAP. TX DMA enabled next to start filling TX FIFO with new data.
-	 * And finaly SPI HW enabled to start actual data transfer.
-	 */
-	dma_async_issue_pending(master->dma_rx);
 	dma_async_issue_pending(master->dma_tx);
 
 	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
@@ -1028,22 +1017,19 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
-	} else {
-		timeout = wait_for_completion_timeout(
-				&spi_imx->dma_rx_completion, transfer_timeout);
-		if (!timeout) {
-			dev_err(spi_imx->dev, "I/O Error in DMA RX\n");
-			spi_imx->devtype_data->reset(spi_imx);
-			dmaengine_terminate_all(master->dma_rx);
-		}
+		return -ETIMEDOUT;
 	}
 
-	if (!timeout)
-		ret = -ETIMEDOUT;
-	else
-		ret = transfer->len;
+	timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion,
+					      transfer_timeout);
+	if (!timeout) {
+		dev_err(&master->dev, "I/O Error in DMA RX\n");
+		spi_imx->devtype_data->reset(spi_imx);
+		dmaengine_terminate_all(master->dma_rx);
+		return -ETIMEDOUT;
+	}
 
-	return ret;
+	return transfer->len;
 }
 
 static int spi_imx_pio_transfer(struct spi_device *spi,
-- 
2.7.0

[PATCH 13/13] ARM: dts: imx6: Use correct SDMA script for SPI cores

[Sascha Hauer]

According to the reference manual the shp_2_mcu / mcu_2_shp
scripts must be used for devices connected through the SPBA.

This fixes an issue we saw with DMA transfers from SPI NOR Flashes.
Sometimes the SPI controller RX FIFO was not empty after a DMA
transfer and the driver got stuck in the next PIO transfer when
it read one word more than expected.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 4f6ae92..06d2c4e 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -261,7 +261,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -275,7 +275,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -289,7 +289,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -303,7 +303,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 13/13] ARM: dts: imx6: Use correct SDMA script for SPI cores

[Sascha Hauer]

According to the reference manual the shp_2_mcu / mcu_2_shp
scripts must be used for devices connected through the SPBA.

This fixes an issue we saw with DMA transfers from SPI NOR Flashes.
Sometimes the SPI controller RX FIFO was not empty after a DMA
transfer and the driver got stuck in the next PIO transfer when
it read one word more than expected.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 4f6ae92..06d2c4e 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -261,7 +261,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -275,7 +275,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -289,7 +289,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -303,7 +303,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
-- 
2.7.0

Re: [PATCH] i.MX SPI DMA cleanup

[Dirk Behme]

Hi Sascha,

On 17.02.2016 14:28, Sascha Hauer wrote:
> This picks up a series sent by Anton Bondarenko last year. It
> contains the remaining not yet upstreamed patches from Antons series
> plus some more DMA related cleanup patches.
>
> My mission was to hunt a bug in the DMA code path sometimes causing
> an additional word in the RX FIFO which locked up the driver in the
> next transfer. It turned out that this was no bug in the driver but
> instead in the device tree: We used the wrong SDMA script for i.MX6.
> The ECSPI cores are connected through the SPBA, so according to the
> reference manual we need the shp/mcu scripts rather than the app/mcu
> scripts.


Are you talking about what is known as "TKT238285 hardware issue"

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022

?

Or are you talking about a different issue?

Best regards

Dirk
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] i.MX SPI DMA cleanup

[Dirk Behme]

Hi Sascha,

On 17.02.2016 14:28, Sascha Hauer wrote:
> This picks up a series sent by Anton Bondarenko last year. It
> contains the remaining not yet upstreamed patches from Antons series
> plus some more DMA related cleanup patches.
>
> My mission was to hunt a bug in the DMA code path sometimes causing
> an additional word in the RX FIFO which locked up the driver in the
> next transfer. It turned out that this was no bug in the driver but
> instead in the device tree: We used the wrong SDMA script for i.MX6.
> The ECSPI cores are connected through the SPBA, so according to the
> reference manual we need the shp/mcu scripts rather than the app/mcu
> scripts.


Are you talking about what is known as "TKT238285 hardware issue"

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022

?

Or are you talking about a different issue?

Best regards

Dirk

Re: [PATCH] i.MX SPI DMA cleanup

[Sascha Hauer]

Hi Dirk,

On Wed, Feb 17, 2016 at 02:42:33PM +0100, Dirk Behme wrote:
> Hi Sascha,
> 
> On 17.02.2016 14:28, Sascha Hauer wrote:
> >This picks up a series sent by Anton Bondarenko last year. It
> >contains the remaining not yet upstreamed patches from Antons series
> >plus some more DMA related cleanup patches.
> >
> >My mission was to hunt a bug in the DMA code path sometimes causing
> >an additional word in the RX FIFO which locked up the driver in the
> >next transfer. It turned out that this was no bug in the driver but
> >instead in the device tree: We used the wrong SDMA script for i.MX6.
> >The ECSPI cores are connected through the SPBA, so according to the
> >reference manual we need the shp/mcu scripts rather than the app/mcu
> >scripts.
> 
> 
> Are you talking about what is known as "TKT238285 hardware issue"
> 
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022

I am aware of this issue, but I have no idea if this is the same or
another issue. It says:

> For TKT238285 hardware issue which may cause txfifo store data twice can only
> be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.

What I saw here is that there was one word more than expected in the RX
FIFO. Since both RX and TX FIFO act synchronously it could be that the
additional word in the RX FIFO was caused by an additional word in the
TX FIFO as described above.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] i.MX SPI DMA cleanup

[Sascha Hauer]

Hi Dirk,

On Wed, Feb 17, 2016 at 02:42:33PM +0100, Dirk Behme wrote:
> Hi Sascha,
> 
> On 17.02.2016 14:28, Sascha Hauer wrote:
> >This picks up a series sent by Anton Bondarenko last year. It
> >contains the remaining not yet upstreamed patches from Antons series
> >plus some more DMA related cleanup patches.
> >
> >My mission was to hunt a bug in the DMA code path sometimes causing
> >an additional word in the RX FIFO which locked up the driver in the
> >next transfer. It turned out that this was no bug in the driver but
> >instead in the device tree: We used the wrong SDMA script for i.MX6.
> >The ECSPI cores are connected through the SPBA, so according to the
> >reference manual we need the shp/mcu scripts rather than the app/mcu
> >scripts.
> 
> 
> Are you talking about what is known as "TKT238285 hardware issue"
> 
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022

I am aware of this issue, but I have no idea if this is the same or
another issue. It says:

> For TKT238285 hardware issue which may cause txfifo store data twice can only
> be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.

What I saw here is that there was one word more than expected in the RX
FIFO. Since both RX and TX FIFO act synchronously it could be that the
additional word in the RX FIFO was caused by an additional word in the
TX FIFO as described above.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH] i.MX SPI DMA cleanup

[Dirk Behme]

On 17.02.2016 14:54, Sascha Hauer wrote:
> Hi Dirk,
>
> On Wed, Feb 17, 2016 at 02:42:33PM +0100, Dirk Behme wrote:
>> Hi Sascha,
>>
>> On 17.02.2016 14:28, Sascha Hauer wrote:
>>> This picks up a series sent by Anton Bondarenko last year. It
>>> contains the remaining not yet upstreamed patches from Antons series
>>> plus some more DMA related cleanup patches.
>>>
>>> My mission was to hunt a bug in the DMA code path sometimes causing
>>> an additional word in the RX FIFO which locked up the driver in the
>>> next transfer. It turned out that this was no bug in the driver but
>>> instead in the device tree: We used the wrong SDMA script for i.MX6.
>>> The ECSPI cores are connected through the SPBA, so according to the
>>> reference manual we need the shp/mcu scripts rather than the app/mcu
>>> scripts.
>>
>>
>> Are you talking about what is known as "TKT238285 hardware issue"
>>
>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
>
> I am aware of this issue, but I have no idea if this is the same or
> another issue. It says:
>
>> For TKT238285 hardware issue which may cause txfifo store data twice can only
>> be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.
>
> What I saw here is that there was one word more than expected in the RX
> FIFO. Since both RX and TX FIFO act synchronously it could be that the
> additional word in the RX FIFO was caused by an additional word in the
> TX FIFO as described above.


The question behind all this is if we could drop

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022

?

And/Or if/how we like to import the FSL workaround for TKT238285

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.14.38_6qp_ga&id=646a751a4d1d0e227a762b461d9b8f92605c26b1

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.14.38_6qp_ga&id=01f180af19a7d5c6f5abc51218be93ea4b5d68ff

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.14.38_6qp_ga&id=321beb210ffb382b8b5378cbf4467f8986efd52f

?

Best regards

Dirk

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] i.MX SPI DMA cleanup

[Dirk Behme]

On 17.02.2016 14:54, Sascha Hauer wrote:
> Hi Dirk,
>
> On Wed, Feb 17, 2016 at 02:42:33PM +0100, Dirk Behme wrote:
>> Hi Sascha,
>>
>> On 17.02.2016 14:28, Sascha Hauer wrote:
>>> This picks up a series sent by Anton Bondarenko last year. It
>>> contains the remaining not yet upstreamed patches from Antons series
>>> plus some more DMA related cleanup patches.
>>>
>>> My mission was to hunt a bug in the DMA code path sometimes causing
>>> an additional word in the RX FIFO which locked up the driver in the
>>> next transfer. It turned out that this was no bug in the driver but
>>> instead in the device tree: We used the wrong SDMA script for i.MX6.
>>> The ECSPI cores are connected through the SPBA, so according to the
>>> reference manual we need the shp/mcu scripts rather than the app/mcu
>>> scripts.
>>
>>
>> Are you talking about what is known as "TKT238285 hardware issue"
>>
>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
>
> I am aware of this issue, but I have no idea if this is the same or
> another issue. It says:
>
>> For TKT238285 hardware issue which may cause txfifo store data twice can only
>> be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.
>
> What I saw here is that there was one word more than expected in the RX
> FIFO. Since both RX and TX FIFO act synchronously it could be that the
> additional word in the RX FIFO was caused by an additional word in the
> TX FIFO as described above.


The question behind all this is if we could drop

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022

?

And/Or if/how we like to import the FSL workaround for TKT238285

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.14.38_6qp_ga&id=646a751a4d1d0e227a762b461d9b8f92605c26b1

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.14.38_6qp_ga&id=01f180af19a7d5c6f5abc51218be93ea4b5d68ff

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.14.38_6qp_ga&id=321beb210ffb382b8b5378cbf4467f8986efd52f

?

Best regards

Dirk

Re: [PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 643 bytes --]

On Wed, Feb 17, 2016 at 02:28:47PM +0100, Sascha Hauer wrote:

> Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90
> since this change only fix usecases with transfer size from 33 to 128 bytes
> and doesn't fix 129 bytes and bigger.

Please include human readable descriptions of things like commits and
issues being discussed in e-mail in your mails, this makes them much
easier for humans to read especially when they have no internet access.
I do frequently catch up on my mail on flights or while otherwise
travelling so this is even more pressing for me than just being about
making things a bit easier to read.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA

[Mark Brown]

On Wed, Feb 17, 2016 at 02:28:47PM +0100, Sascha Hauer wrote:

> Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90
> since this change only fix usecases with transfer size from 33 to 128 bytes
> and doesn't fix 129 bytes and bigger.

Please include human readable descriptions of things like commits and
issues being discussed in e-mail in your mails, this makes them much
easier for humans to read especially when they have no internet access.
I do frequently catch up on my mail on flights or while otherwise
travelling so this is even more pressing for me than just being about
making things a bit easier to read.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160217/6dbb2cba/attachment.sig>

Re: [PATCH 03/13] spi: imx: replace fixed timeout with calculated

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 669 bytes --]

On Wed, Feb 17, 2016 at 02:28:49PM +0100, Sascha Hauer wrote:
> From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Fixed timeout value can fire while transaction is ongoing. This may happen
> because there are no strict requirements on SPI transaction duration.
> Dynamic timeout value is generated based on SCLK and transaction size.
> 
> There is also 4 * SCLK delay between TX bursts related to HW internal CS change.
> 
> Signed-off-by: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---

I can't take this without a signoff from you, sorry - the DCO is very
imporant here.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 03/13] spi: imx: replace fixed timeout with calculated

[Mark Brown]

On Wed, Feb 17, 2016 at 02:28:49PM +0100, Sascha Hauer wrote:
> From: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
> 
> Fixed timeout value can fire while transaction is ongoing. This may happen
> because there are no strict requirements on SPI transaction duration.
> Dynamic timeout value is generated based on SCLK and transaction size.
> 
> There is also 4 * SCLK delay between TX bursts related to HW internal CS change.
> 
> Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
> ---

I can't take this without a signoff from you, sorry - the DCO is very
imporant here.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160217/acd043d2/attachment.sig>

Re: [PATCH] i.MX SPI DMA cleanup

[Sascha Hauer]

On Wed, Feb 17, 2016 at 03:10:44PM +0100, Dirk Behme wrote:
> On 17.02.2016 14:54, Sascha Hauer wrote:
> >Hi Dirk,
> >
> >On Wed, Feb 17, 2016 at 02:42:33PM +0100, Dirk Behme wrote:
> >>Hi Sascha,
> >>
> >>On 17.02.2016 14:28, Sascha Hauer wrote:
> >>>This picks up a series sent by Anton Bondarenko last year. It
> >>>contains the remaining not yet upstreamed patches from Antons series
> >>>plus some more DMA related cleanup patches.
> >>>
> >>>My mission was to hunt a bug in the DMA code path sometimes causing
> >>>an additional word in the RX FIFO which locked up the driver in the
> >>>next transfer. It turned out that this was no bug in the driver but
> >>>instead in the device tree: We used the wrong SDMA script for i.MX6.
> >>>The ECSPI cores are connected through the SPBA, so according to the
> >>>reference manual we need the shp/mcu scripts rather than the app/mcu
> >>>scripts.
> >>
> >>
> >>Are you talking about what is known as "TKT238285 hardware issue"
> >>
> >>https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
> >
> >I am aware of this issue, but I have no idea if this is the same or
> >another issue. It says:
> >
> >>For TKT238285 hardware issue which may cause txfifo store data twice can only
> >>be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.
> >
> >What I saw here is that there was one word more than expected in the RX
> >FIFO. Since both RX and TX FIFO act synchronously it could be that the
> >additional word in the RX FIFO was caused by an additional word in the
> >TX FIFO as described above.
> 
> 
> The question behind all this is if we could drop
> 
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
> 
> ?

It seems on the i.MX6DL we (additionally) have another issue. I just
tested here on a i.MX6DL board with a NOR Flash connected. I saw the
same issue as I saw on the i.MX6Q, but on the i.MX6DL it cannot be fixed
by using the shp/mcu SDMA scripts.
Funny enough on the i.MX6DL the RXFIFO issue happens much more
frequently than on the i.MX6Q.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] i.MX SPI DMA cleanup

[Sascha Hauer]

On Wed, Feb 17, 2016 at 03:10:44PM +0100, Dirk Behme wrote:
> On 17.02.2016 14:54, Sascha Hauer wrote:
> >Hi Dirk,
> >
> >On Wed, Feb 17, 2016 at 02:42:33PM +0100, Dirk Behme wrote:
> >>Hi Sascha,
> >>
> >>On 17.02.2016 14:28, Sascha Hauer wrote:
> >>>This picks up a series sent by Anton Bondarenko last year. It
> >>>contains the remaining not yet upstreamed patches from Antons series
> >>>plus some more DMA related cleanup patches.
> >>>
> >>>My mission was to hunt a bug in the DMA code path sometimes causing
> >>>an additional word in the RX FIFO which locked up the driver in the
> >>>next transfer. It turned out that this was no bug in the driver but
> >>>instead in the device tree: We used the wrong SDMA script for i.MX6.
> >>>The ECSPI cores are connected through the SPBA, so according to the
> >>>reference manual we need the shp/mcu scripts rather than the app/mcu
> >>>scripts.
> >>
> >>
> >>Are you talking about what is known as "TKT238285 hardware issue"
> >>
> >>https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
> >
> >I am aware of this issue, but I have no idea if this is the same or
> >another issue. It says:
> >
> >>For TKT238285 hardware issue which may cause txfifo store data twice can only
> >>be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.
> >
> >What I saw here is that there was one word more than expected in the RX
> >FIFO. Since both RX and TX FIFO act synchronously it could be that the
> >additional word in the RX FIFO was caused by an additional word in the
> >TX FIFO as described above.
> 
> 
> The question behind all this is if we could drop
> 
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
> 
> ?

It seems on the i.MX6DL we (additionally) have another issue. I just
tested here on a i.MX6DL board with a NOR Flash connected. I saw the
same issue as I saw on the i.MX6Q, but on the i.MX6DL it cannot be fixed
by using the shp/mcu SDMA scripts.
Funny enough on the i.MX6DL the RXFIFO issue happens much more
frequently than on the i.MX6Q.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA

[Sascha Hauer]

On Wed, Feb 17, 2016 at 02:16:19PM +0000, Mark Brown wrote:
> On Wed, Feb 17, 2016 at 02:28:47PM +0100, Sascha Hauer wrote:
> 
> > Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90
> > since this change only fix usecases with transfer size from 33 to 128 bytes
> > and doesn't fix 129 bytes and bigger.
> 
> Please include human readable descriptions of things like commits and
> issues being discussed in e-mail in your mails, this makes them much
> easier for humans to read especially when they have no internet access.
> I do frequently catch up on my mail on flights or while otherwise
> travelling so this is even more pressing for me than just being about
> making things a bit easier to read.

You seem to have a template for this, I remember having read the same
text before ;)

Will fix this and add a signed-off-by.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA

[Sascha Hauer]

On Wed, Feb 17, 2016 at 02:16:19PM +0000, Mark Brown wrote:
> On Wed, Feb 17, 2016 at 02:28:47PM +0100, Sascha Hauer wrote:
> 
> > Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90
> > since this change only fix usecases with transfer size from 33 to 128 bytes
> > and doesn't fix 129 bytes and bigger.
> 
> Please include human readable descriptions of things like commits and
> issues being discussed in e-mail in your mails, this makes them much
> easier for humans to read especially when they have no internet access.
> I do frequently catch up on my mail on flights or while otherwise
> travelling so this is even more pressing for me than just being about
> making things a bit easier to read.

You seem to have a template for this, I remember having read the same
text before ;)

Will fix this and add a signed-off-by.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH] i.MX SPI DMA cleanup

[Dirk Behme]

On 17.02.2016 15:59, Sascha Hauer wrote:
> On Wed, Feb 17, 2016 at 03:10:44PM +0100, Dirk Behme wrote:
>> On 17.02.2016 14:54, Sascha Hauer wrote:
>>> Hi Dirk,
>>>
>>> On Wed, Feb 17, 2016 at 02:42:33PM +0100, Dirk Behme wrote:
>>>> Hi Sascha,
>>>>
>>>> On 17.02.2016 14:28, Sascha Hauer wrote:
>>>>> This picks up a series sent by Anton Bondarenko last year. It
>>>>> contains the remaining not yet upstreamed patches from Antons series
>>>>> plus some more DMA related cleanup patches.
>>>>>
>>>>> My mission was to hunt a bug in the DMA code path sometimes causing
>>>>> an additional word in the RX FIFO which locked up the driver in the
>>>>> next transfer. It turned out that this was no bug in the driver but
>>>>> instead in the device tree: We used the wrong SDMA script for i.MX6.
>>>>> The ECSPI cores are connected through the SPBA, so according to the
>>>>> reference manual we need the shp/mcu scripts rather than the app/mcu
>>>>> scripts.
>>>>
>>>>
>>>> Are you talking about what is known as "TKT238285 hardware issue"
>>>>
>>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
>>>
>>> I am aware of this issue, but I have no idea if this is the same or
>>> another issue. It says:
>>>
>>>> For TKT238285 hardware issue which may cause txfifo store data twice can only
>>>> be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.
>>>
>>> What I saw here is that there was one word more than expected in the RX
>>> FIFO. Since both RX and TX FIFO act synchronously it could be that the
>>> additional word in the RX FIFO was caused by an additional word in the
>>> TX FIFO as described above.
>>
>>
>> The question behind all this is if we could drop
>>
>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
>>
>> ?
>
> It seems on the i.MX6DL we (additionally) have another issue. I just
> tested here on a i.MX6DL board with a NOR Flash connected. I saw the
> same issue as I saw on the i.MX6Q, but on the i.MX6DL it cannot be fixed
> by using the shp/mcu SDMA scripts.


To my understanding this might depend on the SDMA firmware itself, as in

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.14.38_6qp_ga&id=321beb210ffb382b8b5378cbf4467f8986efd52f

Freescale patches/changes the firmware, too.


> Funny enough on the i.MX6DL the RXFIFO issue happens much more
> frequently than on the i.MX6Q.


To my understanding, the TKT238285 hardware issue exists on both i.MX6Q 
and i.MX6DL. Even though the commit message in

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c802

states it differently. Maybe due to timing issues it happens less often 
on i.MX6Q and therefore wasn't in the focus there, yet.

Best regards

Dirk
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] i.MX SPI DMA cleanup

[Dirk Behme]

On 17.02.2016 15:59, Sascha Hauer wrote:
> On Wed, Feb 17, 2016 at 03:10:44PM +0100, Dirk Behme wrote:
>> On 17.02.2016 14:54, Sascha Hauer wrote:
>>> Hi Dirk,
>>>
>>> On Wed, Feb 17, 2016 at 02:42:33PM +0100, Dirk Behme wrote:
>>>> Hi Sascha,
>>>>
>>>> On 17.02.2016 14:28, Sascha Hauer wrote:
>>>>> This picks up a series sent by Anton Bondarenko last year. It
>>>>> contains the remaining not yet upstreamed patches from Antons series
>>>>> plus some more DMA related cleanup patches.
>>>>>
>>>>> My mission was to hunt a bug in the DMA code path sometimes causing
>>>>> an additional word in the RX FIFO which locked up the driver in the
>>>>> next transfer. It turned out that this was no bug in the driver but
>>>>> instead in the device tree: We used the wrong SDMA script for i.MX6.
>>>>> The ECSPI cores are connected through the SPBA, so according to the
>>>>> reference manual we need the shp/mcu scripts rather than the app/mcu
>>>>> scripts.
>>>>
>>>>
>>>> Are you talking about what is known as "TKT238285 hardware issue"
>>>>
>>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
>>>
>>> I am aware of this issue, but I have no idea if this is the same or
>>> another issue. It says:
>>>
>>>> For TKT238285 hardware issue which may cause txfifo store data twice can only
>>>> be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl.
>>>
>>> What I saw here is that there was one word more than expected in the RX
>>> FIFO. Since both RX and TX FIFO act synchronously it could be that the
>>> additional word in the RX FIFO was caused by an additional word in the
>>> TX FIFO as described above.
>>
>>
>> The question behind all this is if we could drop
>>
>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c8022
>>
>> ?
>
> It seems on the i.MX6DL we (additionally) have another issue. I just
> tested here on a i.MX6DL board with a NOR Flash connected. I saw the
> same issue as I saw on the i.MX6Q, but on the i.MX6DL it cannot be fixed
> by using the shp/mcu SDMA scripts.


To my understanding this might depend on the SDMA firmware itself, as in

http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.14.38_6qp_ga&id=321beb210ffb382b8b5378cbf4467f8986efd52f

Freescale patches/changes the firmware, too.


> Funny enough on the i.MX6DL the RXFIFO issue happens much more
> frequently than on the i.MX6Q.


To my understanding, the TKT238285 hardware issue exists on both i.MX6Q 
and i.MX6DL. Even though the commit message in

https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c802

states it differently. Maybe due to timing issues it happens less often 
on i.MX6Q and therefore wasn't in the focus there, yet.

Best regards

Dirk

Re: [PATCH] i.MX SPI DMA cleanup

[Fabio Estevam]

On Wed, Feb 17, 2016 at 1:33 PM, Dirk Behme <dirk.behme-V5te9oGctAVWk0Htik3J/w@public.gmane.org> wrote:

> To my understanding, the TKT238285 hardware issue exists on both i.MX6Q and
> i.MX6DL. Even though the commit message in
>
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c802
>
> states it differently. Maybe due to timing issues it happens less often on
> i.MX6Q and therefore wasn't in the focus there, yet.

Yes, this is my understanding as well.
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] i.MX SPI DMA cleanup

[Fabio Estevam]

On Wed, Feb 17, 2016 at 1:33 PM, Dirk Behme <dirk.behme@de.bosch.com> wrote:

> To my understanding, the TKT238285 hardware issue exists on both i.MX6Q and
> i.MX6DL. Even though the commit message in
>
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/spi/spi-imx.c?id=a02bb401f8ae264be782ee57d98bdd99f14c802
>
> states it differently. Maybe due to timing issues it happens less often on
> i.MX6Q and therefore wasn't in the focus there, yet.

Yes, this is my understanding as well.

Re: [PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 248 bytes --]

On Wed, Feb 17, 2016 at 04:01:46PM +0100, Sascha Hauer wrote:

> You seem to have a template for this, I remember having read the same
> text before ;)

I do, but even before I had a template I'd always end up typing the same
thing by hand anyway.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 01/13] spi: imx: allow only WML aligned transfers to use DMA

[Mark Brown]

On Wed, Feb 17, 2016 at 04:01:46PM +0100, Sascha Hauer wrote:

> You seem to have a template for this, I remember having read the same
> text before ;)

I do, but even before I had a template I'd always end up typing the same
thing by hand anyway.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160217/c79057ee/attachment-0001.sig>

Applied "spi: imx: use proper dev_* functions for driver messages" to the spi tree

[Mark Brown]

The patch

   spi: imx: use proper dev_* functions for driver messages

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 6aa800ca65b1788e8c2e4ffd1e57a4c4355fe0ed Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Wed, 17 Feb 2016 14:28:48 +0100
Subject: [PATCH] spi: imx: use proper dev_* functions for driver messages

Add a struct device * member to the private driver data and use
it to print messages using dev_* functions rather than pr_*.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index d98c33cb64f9..7ac206b8cc93 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -86,6 +86,7 @@ struct spi_imx_devtype_data {
 
 struct spi_imx_data {
 	struct spi_bitbang bitbang;
+	struct device *dev;
 
 	struct completion xfer_done;
 	void __iomem *base;
@@ -250,14 +251,15 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_TESTREG_LBC	BIT(31)
 
 /* MX51 eCSPI */
-static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
-				      unsigned int *fres)
+static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
+				      unsigned int fspi, unsigned int *fres)
 {
 	/*
 	 * there are two 4-bit dividers, the pre-divider divides by
 	 * $pre, the post-divider by 2^$post
 	 */
 	unsigned int pre, post;
+	unsigned int fin = spi_imx->spi_clk;
 
 	if (unlikely(fspi > fin))
 		return 0;
@@ -270,14 +272,14 @@ static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi,
 
 	post = max(4U, post) - 4;
 	if (unlikely(post > 0xf)) {
-		pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
-				__func__, fspi, fin);
+		dev_err(spi_imx->dev, "cannot set clock freq: %u (base freq: %u)\n",
+				fspi, fin);
 		return 0xff;
 	}
 
 	pre = DIV_ROUND_UP(fin, fspi << post) - 1;
 
-	pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+	dev_dbg(spi_imx->dev, "%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
 			__func__, fin, fspi, post, pre);
 
 	/* Resulting frequency for the SCLK line. */
@@ -330,7 +332,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
 
 	/* set clock speed */
-	ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz, &clk);
+	ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
 
 	/* set chip select to use */
 	ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
@@ -977,18 +979,14 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
 						IMX_DMA_TIMEOUT);
 	if (!timeout) {
-		pr_warn("%s %s: I/O Error in DMA TX\n",
-			dev_driver_string(&master->dev),
-			dev_name(&master->dev));
+		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
 	} else {
 		timeout = wait_for_completion_timeout(
 				&spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT);
 		if (!timeout) {
-			pr_warn("%s %s: I/O Error in DMA RX\n",
-				dev_driver_string(&master->dev),
-				dev_name(&master->dev));
+			dev_err(spi_imx->dev, "I/O Error in DMA RX\n");
 			spi_imx->devtype_data->reset(spi_imx);
 			dmaengine_terminate_all(master->dma_rx);
 		}
@@ -1009,9 +1007,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	return ret;
 
 no_dma:
-	pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
-		     dev_driver_string(&master->dev),
-		     dev_name(&master->dev));
+	dev_warn_once(spi_imx->dev, "DMA not available, falling back to PIO\n");
 	return -EAGAIN;
 }
 
@@ -1141,6 +1137,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 
 	spi_imx = spi_master_get_devdata(master);
 	spi_imx->bitbang.master = master;
+	spi_imx->dev = &pdev->dev;
 
 	spi_imx->devtype_data = of_id ? of_id->data :
 		(struct spi_imx_devtype_data *)pdev->id_entry->driver_data;
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi: imx: allow only WML aligned transfers to use DMA" to the spi tree

[Mark Brown]

The patch

   spi: imx: allow only WML aligned transfers to use DMA

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 390f0ffe92aea878b763c7fd8afd1dff62e0d20b Mon Sep 17 00:00:00 2001
From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Wed, 17 Feb 2016 14:28:47 +0100
Subject: [PATCH] spi: imx: allow only WML aligned transfers to use DMA

RX DMA tail data handling doesn't work correctly in many cases with current
implementation. It happens because SPI core was setup to generates both RX
and RX TAIL events. And RX TAIL event does not work correctly.
This can be easily verified by sending SPI transaction with size modulus
WML(32 in our case) not equal 0.

Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90
since this change only fix usecases with transfer size from 33 to 128 bytes
and doesn't fix 129 bytes and bigger.

This is output from transaction with len 138 bytes in loopback mode at 10Mhz:
TX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2
TX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75
TX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95
TX0030: 5f 3c 35 b5 c4 8c dd 6c 11 32 3d e2 b4 b4 59 cf
TX0040: ce 23 3d 27 df a7 f9 96 fc 1e e0 66 2c 0e 7b 8c
TX0050: ca 30 42 8f bc 9f 7b ce d1 b8 b1 87 ec 8a d6 bb
TX0060: 2e 15 63 0e 3c dc a4 3a 7a 06 20 a7 93 1b 34 dd
TX0070: 4c f5 ec 88 96 68 d6 68 a0 09 6f 8e 93 47 c9 41
TX0080: db ac cf 97 89 f3 51 05 79 71

RX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2
RX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75
RX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95
RX0030: 5f 3c 35 00 00 b5 00 00 00 c4 00 00 8c 00 00 dd
RX0040: 6c 11 32 3d e2 b4 b4 59 cf ce 23 3d 27 df a7 f9
RX0050: 96 fc 1e e0 66 2c 0e 7b 8c ca 30 42 8f 1f 1f bc
RX0060: 9f 7b ce d1 b8 b1 87 ec 8a d6 bb 2e 15 63 0e ed
RX0070: ed 3c 58 58 58 dc 3d 3d a4 6a 6a 3a 52 52 7a 36
RX0080: 06 20 a7 93 1b 34 dd 4c f5 ec

Zeros at offset 33 and 34 caused by reading empty RX FIFO which not possible
if DMA RX read was triggered by RX event. This mean DMA was triggered
by RX TAIL event.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index d98c33cb64f9..08492d6faa0d 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -204,8 +204,8 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 
-	if (spi_imx->dma_is_inited &&
-	    transfer->len > spi_imx->wml * sizeof(u32))
+	if (spi_imx->dma_is_inited && transfer->len >= spi_imx->wml &&
+	    (transfer->len % spi_imx->wml) == 0)
 		return true;
 	return false;
 }
@@ -919,8 +919,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
 	int ret;
 	unsigned long timeout;
-	u32 dma;
-	int left;
 	struct spi_master *master = spi_imx->bitbang.master;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
 
@@ -954,13 +952,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	/* Trigger the cspi module. */
 	spi_imx->dma_finished = 0;
 
-	dma = readl(spi_imx->base + MX51_ECSPI_DMA);
-	dma = dma & (~MX51_ECSPI_DMA_RXT_WML_MASK);
-	/* Change RX_DMA_LENGTH trigger dma fetch tail data */
-	left = transfer->len % spi_imx->wml;
-	if (left)
-		writel(dma | (left << MX51_ECSPI_DMA_RXT_WML_OFFSET),
-				spi_imx->base + MX51_ECSPI_DMA);
 	/*
 	 * Set these order to avoid potential RX overflow. The overflow may
 	 * happen if we enable SPI HW before starting RX DMA due to rescheduling
@@ -992,10 +983,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 			spi_imx->devtype_data->reset(spi_imx);
 			dmaengine_terminate_all(master->dma_rx);
 		}
-		dma &= ~MX51_ECSPI_DMA_RXT_WML_MASK;
-		writel(dma |
-		       spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET,
-		       spi_imx->base + MX51_ECSPI_DMA);
 	}
 
 	spi_imx->dma_finished = 1;
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] i.MX SPI DMA cleanup

[Shawn Guo]

On Wed, Feb 17, 2016 at 02:28:46PM +0100, Sascha Hauer wrote:
> Shawn, please pick up the last patch. The rest can go through the SPI
> tree. The last patch has no dependency on the remaining patches.

Okay, patch #13 applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] i.MX SPI DMA cleanup

[Shawn Guo]

On Wed, Feb 17, 2016 at 02:28:46PM +0100, Sascha Hauer wrote:
> Shawn, please pick up the last patch. The rest can go through the SPI
> tree. The last patch has no dependency on the remaining patches.

Okay, patch #13 applied.

Applied "spi: imx: replace fixed timeout with calculated" to the spi tree

[Mark Brown]

The patch

   spi: imx: replace fixed timeout with calculated

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 4bfe927a11b18db447706507654aef83c9ef15c1 Mon Sep 17 00:00:00 2001
From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Fri, 19 Feb 2016 08:43:03 +0100
Subject: [PATCH] spi: imx: replace fixed timeout with calculated

Fixed timeout value can fire while transaction is ongoing. This may happen
because there are no strict requirements on SPI transaction duration.
Dynamic timeout value is generated based on SCLK and transaction size.

There is also 4 * SCLK delay between TX bursts related to HW internal CS change.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index c5eeb84..6497fc9 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -56,7 +56,6 @@
 
 /* The maximum  bytes that a sdma BD can transfer.*/
 #define MAX_SDMA_BD_BYTES  (1 << 15)
-#define IMX_DMA_TIMEOUT (msecs_to_jiffies(3000))
 struct spi_imx_config {
 	unsigned int speed_hz;
 	unsigned int bpw;
@@ -93,6 +92,7 @@ struct spi_imx_data {
 	struct clk *clk_per;
 	struct clk *clk_ipg;
 	unsigned long spi_clk;
+	unsigned int spi_bus_clk;
 
 	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
@@ -333,6 +333,7 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 
 	/* set clock speed */
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
+	spi_imx->spi_bus_clk = clk;
 
 	/* set chip select to use */
 	ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
@@ -915,11 +916,26 @@ static void spi_imx_dma_tx_callback(void *cookie)
 	complete(&spi_imx->dma_tx_completion);
 }
 
+static int spi_imx_calculate_timeout(struct spi_imx_data *spi_imx, int size)
+{
+	unsigned long timeout = 0;
+
+	/* Time with actual data transfer and CS change delay related to HW */
+	timeout = (8 + 4) * size / spi_imx->spi_bus_clk;
+
+	/* Add extra second for scheduler related activities */
+	timeout += 1;
+
+	/* Double calculated timeout */
+	return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
+}
+
 static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 				struct spi_transfer *transfer)
 {
 	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
 	int ret;
+	unsigned long transfer_timeout;
 	unsigned long timeout;
 	struct spi_master *master = spi_imx->bitbang.master;
 	struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
@@ -966,16 +982,18 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	dma_async_issue_pending(master->dma_tx);
 	spi_imx->devtype_data->trigger(spi_imx);
 
+	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
+
 	/* Wait SDMA to finish the data transfer.*/
 	timeout = wait_for_completion_timeout(&spi_imx->dma_tx_completion,
-						IMX_DMA_TIMEOUT);
+						transfer_timeout);
 	if (!timeout) {
 		dev_err(spi_imx->dev, "I/O Error in DMA TX\n");
 		dmaengine_terminate_all(master->dma_tx);
 		dmaengine_terminate_all(master->dma_rx);
 	} else {
 		timeout = wait_for_completion_timeout(
-				&spi_imx->dma_rx_completion, IMX_DMA_TIMEOUT);
+				&spi_imx->dma_rx_completion, transfer_timeout);
 		if (!timeout) {
 			dev_err(spi_imx->dev, "I/O Error in DMA RX\n");
 			spi_imx->devtype_data->reset(spi_imx);
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function" to the spi tree

[Mark Brown]

The patch

   spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From b03c3884ca8c5ad3e6d14af6c8df0e3650c67482 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Wed, 24 Feb 2016 09:20:32 +0100
Subject: [PATCH] spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function

Now that the config function knows whether we are doing DMA or not we
can do the necessary register setup in the config function and no longer
have to do this in the trigger function. With this the trigger function
becomes a no-op for DMA, so instead of testing if we are doing DMA or
not in the trigger function we simply no longer call it in the DMA case.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 96e32d409820..91890b2d0978 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -106,7 +106,6 @@ struct spi_imx_data {
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 
 	/* DMA */
-	unsigned int dma_finished;
 	bool usedma;
 	u32 wml;
 	struct completion dma_rx_completion;
@@ -324,14 +323,10 @@ static void __maybe_unused mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int
 
 static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 {
-	u32 reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+	u32 reg;
 
-	if (!spi_imx->usedma)
-		reg |= MX51_ECSPI_CTRL_XCH;
-	else if (!spi_imx->dma_finished)
-		reg |= MX51_ECSPI_CTRL_SMC;
-	else
-		reg &= ~MX51_ECSPI_CTRL_SMC;
+	reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+	reg |= MX51_ECSPI_CTRL_XCH;
 	writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
 }
 
@@ -371,6 +366,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	if (config->mode & SPI_CS_HIGH)
 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
 
+	if (spi_imx->usedma)
+		ctrl |= MX51_ECSPI_CTRL_SMC;
+
 	/* CTRL register always go first to bring out controller from reset */
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -1012,9 +1010,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	reinit_completion(&spi_imx->dma_rx_completion);
 	reinit_completion(&spi_imx->dma_tx_completion);
 
-	/* Trigger the cspi module. */
-	spi_imx->dma_finished = 0;
-
 	/*
 	 * Set these order to avoid potential RX overflow. The overflow may
 	 * happen if we enable SPI HW before starting RX DMA due to rescheduling
@@ -1025,7 +1020,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	 */
 	dma_async_issue_pending(master->dma_rx);
 	dma_async_issue_pending(master->dma_tx);
-	spi_imx->devtype_data->trigger(spi_imx);
 
 	transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
 
@@ -1046,9 +1040,6 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 		}
 	}
 
-	spi_imx->dma_finished = 1;
-	spi_imx->devtype_data->trigger(spi_imx);
-
 	if (!timeout)
 		ret = -ETIMEDOUT;
 	else
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi: imx: make some register defines simpler" to the spi tree

[Mark Brown]

The patch

   spi: imx: make some register defines simpler

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From d629c2a0051f27cc17ac9dc36bbeef8174b48aae Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Wed, 24 Feb 2016 09:20:31 +0100
Subject: [PATCH] spi: imx: make some register defines simpler

The watermark levels in the DMA register are write only, the driver
should never have to read them back from the hardware. Replace the
current _MASK and _OFFSET defines with defines taking the watermark
level directly.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 287ec0cb6992..96e32d409820 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -256,12 +256,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_INT_RREN		(1 <<  3)
 
 #define MX51_ECSPI_DMA      0x14
-#define MX51_ECSPI_DMA_TX_WML_OFFSET	0
-#define MX51_ECSPI_DMA_TX_WML_MASK	0x3F
-#define MX51_ECSPI_DMA_RX_WML_OFFSET	16
-#define MX51_ECSPI_DMA_RX_WML_MASK	(0x3F << 16)
-#define MX51_ECSPI_DMA_RXT_WML_OFFSET	24
-#define MX51_ECSPI_DMA_RXT_WML_MASK	(0x3F << 24)
+#define MX51_ECSPI_DMA_TX_WML(wml)	((wml) & 0x3f)
+#define MX51_ECSPI_DMA_RX_WML(wml)	(((wml) & 0x3f) << 16)
+#define MX51_ECSPI_DMA_RXT_WML(wml)	(((wml) & 0x3f) << 24)
 
 #define MX51_ECSPI_DMA_TEDEN		(1 << 7)
 #define MX51_ECSPI_DMA_RXDEN		(1 << 23)
@@ -408,9 +405,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	 * and enable DMA request.
 	 */
 
-	writel(spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET |
-		spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET |
-		spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET |
+	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
 
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi: imx: remove unnecessary bit clearing in mx51_ecspi_config" to the spi tree

[Mark Brown]

The patch

   spi: imx: remove unnecessary bit clearing in mx51_ecspi_config

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From c34de7168cd201ab757b11bfc7899953948d7753 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Wed, 24 Feb 2016 09:20:30 +0100
Subject: [PATCH] spi: imx: remove unnecessary bit clearing in
 mx51_ecspi_config

This reverts patch 1476253cef (spi: imx: fix ecspi mode setup)
The patch tried to fix something by clearing bits in the cfg variable,
but cfg is initialized to zero on function entry. There are no bits to
clear.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 15b23f0b83e8..287ec0cb6992 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -366,20 +366,13 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 
 	if (config->mode & SPI_CPHA)
 		cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
-	else
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
 
 	if (config->mode & SPI_CPOL) {
 		cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
 		cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
-	} else {
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
-		cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
 	}
 	if (config->mode & SPI_CS_HIGH)
 		cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
-	else
-		cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs);
 
 	/* CTRL register always go first to bring out controller from reset */
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi: imx: add support for all SPI word width for DMA" to the spi tree

[Mark Brown]

The patch

   spi: imx: add support for all SPI word width for DMA

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From f12ae171c7ce8633a6dd6dea4c50fd6cb72f433a Mon Sep 17 00:00:00 2001
From: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Wed, 24 Feb 2016 09:20:29 +0100
Subject: [PATCH] spi: imx: add support for all SPI word width for DMA

DMA transfer for SPI was limited to up to 8 bits word size until now.
Sync in SPI burst size and DMA bus width is necessary to correctly
support 16 and 32 BPW.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 118 ++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 91 insertions(+), 27 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 567a2426e314..15b23f0b83e8 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -89,11 +89,15 @@ struct spi_imx_data {
 
 	struct completion xfer_done;
 	void __iomem *base;
+	unsigned long base_phys;
+
 	struct clk *clk_per;
 	struct clk *clk_ipg;
 	unsigned long spi_clk;
 	unsigned int spi_bus_clk;
 
+	unsigned int bytes_per_word;
+
 	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
 	void (*rx)(struct spi_imx_data *);
@@ -199,15 +203,35 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
 	return 7;
 }
 
+static int spi_imx_bytes_per_word(const int bpw)
+{
+	return DIV_ROUND_UP(bpw, BITS_PER_BYTE);
+}
+
 static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 			 struct spi_transfer *transfer)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+	unsigned int bpw = transfer->bits_per_word;
+
+	if (!master->dma_rx)
+		return false;
+
+	if (!bpw)
+		bpw = spi->bits_per_word;
+
+	bpw = spi_imx_bytes_per_word(bpw);
+
+	if (bpw != 1 && bpw != 2 && bpw != 4)
+		return false;
+
+	if (transfer->len < spi_imx->wml * bpw)
+		return false;
+
+	if (transfer->len % (spi_imx->wml * bpw))
+		return false;
 
-	if (master->dma_rx && transfer->len >= spi_imx->wml &&
-	    (transfer->len % spi_imx->wml) == 0)
-		return true;
-	return false;
+	return true;
 }
 
 #define MX51_ECSPI_CTRL		0x08
@@ -775,11 +799,63 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int spi_imx_dma_configure(struct spi_master *master,
+				 int bytes_per_word)
+{
+	int ret;
+	enum dma_slave_buswidth buswidth;
+	struct dma_slave_config rx = {}, tx = {};
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+
+	if (bytes_per_word == spi_imx->bytes_per_word)
+		/* Same as last time */
+		return 0;
+
+	switch (bytes_per_word) {
+	case 4:
+		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
+	case 2:
+		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		break;
+	case 1:
+		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	tx.direction = DMA_MEM_TO_DEV;
+	tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA;
+	tx.dst_addr_width = buswidth;
+	tx.dst_maxburst = spi_imx->wml;
+	ret = dmaengine_slave_config(master->dma_tx, &tx);
+	if (ret) {
+		dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret);
+		return ret;
+	}
+
+	rx.direction = DMA_DEV_TO_MEM;
+	rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA;
+	rx.src_addr_width = buswidth;
+	rx.src_maxburst = spi_imx->wml;
+	ret = dmaengine_slave_config(master->dma_rx, &rx);
+	if (ret) {
+		dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret);
+		return ret;
+	}
+
+	spi_imx->bytes_per_word = bytes_per_word;
+
+	return 0;
+}
+
 static int spi_imx_setupxfer(struct spi_device *spi,
 				 struct spi_transfer *t)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 	struct spi_imx_config config;
+	int ret;
 
 	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
 	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
@@ -808,6 +884,13 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 	else
 		spi_imx->usedma = 0;
 
+	if (spi_imx->usedma) {
+		ret = spi_imx_dma_configure(spi->master,
+					    spi_imx_bytes_per_word(config.bpw));
+		if (ret)
+			return ret;
+	}
+
 	spi_imx->devtype_data->config(spi_imx, &config);
 
 	return 0;
@@ -829,10 +912,8 @@ static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
 }
 
 static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
-			     struct spi_master *master,
-			     const struct resource *res)
+			     struct spi_master *master)
 {
-	struct dma_slave_config slave_config = {};
 	int ret;
 
 	/* use pio mode for i.mx6dl chip TKT238285 */
@@ -850,16 +931,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 		goto err;
 	}
 
-	slave_config.direction = DMA_MEM_TO_DEV;
-	slave_config.dst_addr = res->start + MXC_CSPITXDATA;
-	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	slave_config.dst_maxburst = spi_imx->wml;
-	ret = dmaengine_slave_config(master->dma_tx, &slave_config);
-	if (ret) {
-		dev_err(dev, "error in TX dma configuration.\n");
-		goto err;
-	}
-
 	/* Prepare for RX : */
 	master->dma_rx = dma_request_slave_channel_reason(dev, "rx");
 	if (IS_ERR(master->dma_rx)) {
@@ -869,15 +940,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 		goto err;
 	}
 
-	slave_config.direction = DMA_DEV_TO_MEM;
-	slave_config.src_addr = res->start + MXC_CSPIRXDATA;
-	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	slave_config.src_maxburst = spi_imx->wml;
-	ret = dmaengine_slave_config(master->dma_rx, &slave_config);
-	if (ret) {
-		dev_err(dev, "error in RX dma configuration.\n");
-		goto err;
-	}
+	spi_imx_dma_configure(master, 1);
 
 	init_completion(&spi_imx->dma_rx_completion);
 	init_completion(&spi_imx->dma_tx_completion);
@@ -1164,6 +1227,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 		ret = PTR_ERR(spi_imx->base);
 		goto out_master_put;
 	}
+	spi_imx->base_phys = res->start;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -1204,7 +1268,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 	 * other chips.
 	 */
 	if (is_imx51_ecspi(spi_imx)) {
-		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master, res);
+		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
 		if (ret == -EPROBE_DEFER)
 			goto out_clk_put;
 
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi: imx: drop unncessary dma_is_inited variable" to the spi tree

[Mark Brown]

The patch

   spi: imx: drop unncessary dma_is_inited variable

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 882f329f31cb7317811fe084e0b0642954649bf5 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Wed, 24 Feb 2016 09:20:28 +0100
Subject: [PATCH] spi: imx: drop unncessary dma_is_inited variable

There's no need for an extra dma_is_inited variable when we can
equally well check for the existence of a DMA channel.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index ec033043734a..567a2426e314 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -102,7 +102,6 @@ struct spi_imx_data {
 	unsigned int txfifo; /* number of words pushed in tx FIFO */
 
 	/* DMA */
-	unsigned int dma_is_inited;
 	unsigned int dma_finished;
 	bool usedma;
 	u32 wml;
@@ -205,7 +204,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 
-	if (spi_imx->dma_is_inited && transfer->len >= spi_imx->wml &&
+	if (master->dma_rx && transfer->len >= spi_imx->wml &&
 	    (transfer->len % spi_imx->wml) == 0)
 		return true;
 	return false;
@@ -827,8 +826,6 @@ static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx)
 		dma_release_channel(master->dma_tx);
 		master->dma_tx = NULL;
 	}
-
-	spi_imx->dma_is_inited = 0;
 }
 
 static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
@@ -888,7 +885,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 	master->max_dma_len = MAX_SDMA_BD_BYTES;
 	spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
 					 SPI_MASTER_MUST_TX;
-	spi_imx->dma_is_inited = 1;
 
 	return 0;
 err:
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi: imx: drop unnecessary read/modify/write" to the spi tree

[Mark Brown]

The patch

   spi: imx: drop unnecessary read/modify/write

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 2b0fd069ec159d8234c730855eb892104ae2edc9 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Wed, 24 Feb 2016 09:20:27 +0100
Subject: [PATCH] spi: imx: drop unnecessary read/modify/write

When the MX51_ECSPI_DMA is configured we control every single bit
of the register, so there's no need to read/modify/write it. Instead
just write the value we want to have in the register. Also, drop
unnecessary check if we are actually doing DMA. The values written
to the register have no effect in PIO mode and value written there
during the last DMA transfer is still in the register, so we can
equally well always write a value.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 31 ++++++++++---------------------
 1 file changed, 10 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 5792918aa751..ec033043734a 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -240,9 +240,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_DMA_RXT_WML_OFFSET	24
 #define MX51_ECSPI_DMA_RXT_WML_MASK	(0x3F << 24)
 
-#define MX51_ECSPI_DMA_TEDEN_OFFSET	7
-#define MX51_ECSPI_DMA_RXDEN_OFFSET	23
-#define MX51_ECSPI_DMA_RXTDEN_OFFSET	31
+#define MX51_ECSPI_DMA_TEDEN		(1 << 7)
+#define MX51_ECSPI_DMA_RXDEN		(1 << 23)
+#define MX51_ECSPI_DMA_RXTDEN		(1 << 31)
 
 #define MX51_ECSPI_STAT		0x18
 #define MX51_ECSPI_STAT_RR		(1 <<  3)
@@ -318,8 +318,7 @@ static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 		struct spi_imx_config *config)
 {
-	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0, dma = 0;
-	u32 tx_wml_cfg, rx_wml_cfg, rxt_wml_cfg;
+	u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0;
 	u32 clk = config->speed_hz, delay, reg;
 
 	/*
@@ -392,22 +391,12 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
-	if (spi_imx->dma_is_inited) {
-		dma = readl(spi_imx->base + MX51_ECSPI_DMA);
-
-		rx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
-		tx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
-		rxt_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET;
-		dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK
-			   & ~MX51_ECSPI_DMA_RX_WML_MASK
-			   & ~MX51_ECSPI_DMA_RXT_WML_MASK)
-			   | rx_wml_cfg | tx_wml_cfg | rxt_wml_cfg
-			   |(1 << MX51_ECSPI_DMA_TEDEN_OFFSET)
-			   |(1 << MX51_ECSPI_DMA_RXDEN_OFFSET)
-			   |(1 << MX51_ECSPI_DMA_RXTDEN_OFFSET);
-
-		writel(dma, spi_imx->base + MX51_ECSPI_DMA);
-	}
+
+	writel(spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET |
+		spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET |
+		spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET |
+		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
+		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
 
 	return 0;
 }
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Applied "spi: imx: initialize usedma earlier" to the spi tree

[Mark Brown]

The patch

   spi: imx: initialize usedma earlier

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From c008a800716256300c8a62e781a8897a8d3bce1e Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Wed, 24 Feb 2016 09:20:26 +0100
Subject: [PATCH] spi: imx: initialize usedma earlier

The SoC specific config function does not know if DMA will be used or
not. This information will be useful to configure the SPI controller
correctly for DMA in following patches, so initialize the usedma
variable before calling into the SoC specific config function.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-imx.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index a61b1b140523..5792918aa751 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -815,6 +815,11 @@ static int spi_imx_setupxfer(struct spi_device *spi,
 		spi_imx->tx = spi_imx_buf_tx_u32;
 	}
 
+	if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t))
+		spi_imx->usedma = 1;
+	else
+		spi_imx->usedma = 0;
+
 	spi_imx->devtype_data->config(spi_imx, &config);
 
 	return 0;
@@ -1040,14 +1045,10 @@ static int spi_imx_transfer(struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 
-	if (spi_imx->bitbang.master->can_dma &&
-	    spi_imx_can_dma(spi_imx->bitbang.master, spi, transfer)) {
-		spi_imx->usedma = true;
+	if (spi_imx->usedma)
 		return spi_imx_dma_transfer(spi_imx, transfer);
-	}
-	spi_imx->usedma = false;
-
-	return spi_imx_pio_transfer(spi, transfer);
+	else
+		return spi_imx_pio_transfer(spi, transfer);
 }
 
 static int spi_imx_setup(struct spi_device *spi)
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html