* [PATCH V6 1/2] regulator: Add document for MT6323 regulator @ 2016-02-17 11:37 ` John Crispin 0 siblings, 0 replies; 21+ messages in thread From: John Crispin @ 2016-02-17 11:37 UTC (permalink / raw) To: Liam Girdwood, Mark Brown, Matthias Brugger Cc: linux-kernel, linux-arm-kernel, linux-mediatek, John Crispin, devicetree Signed-off-by: John Crispin <blogic@openwrt.org> Cc: devicetree@vger.kernel.org --- Changes in V6 * remove the compatible string Changes in V5 * regulator vs regulators Changes in V4 * regulator is a subnode and not a property .../bindings/regulator/mt6323-regulator.txt | 241 ++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt new file mode 100644 index 0000000..67c0780 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt @@ -0,0 +1,241 @@ +Mediatek MT6323 Regulator Driver + +All voltage regulators are defined as subnodes of the regulators node. A list +of regulators provided by this controller are defined as subnodes of the +drivers node. Each regulator is named according to its regulator type, +buck_<name> and ldo_<name>. The definition for each of these nodes is defined +using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vproc, buck_vsys, buck_vpa +LDO: + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio + +Example: + + pmic: mt6323 { + compatible = "mediatek,mt6323"; + + mt6323regulator: regulators { + compatible = "mediatek,mt6323-regulator"; + + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH V6 1/2] regulator: Add document for MT6323 regulator @ 2016-02-17 11:37 ` John Crispin 0 siblings, 0 replies; 21+ messages in thread From: John Crispin @ 2016-02-17 11:37 UTC (permalink / raw) To: linux-arm-kernel Signed-off-by: John Crispin <blogic@openwrt.org> Cc: devicetree at vger.kernel.org --- Changes in V6 * remove the compatible string Changes in V5 * regulator vs regulators Changes in V4 * regulator is a subnode and not a property .../bindings/regulator/mt6323-regulator.txt | 241 ++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt new file mode 100644 index 0000000..67c0780 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt @@ -0,0 +1,241 @@ +Mediatek MT6323 Regulator Driver + +All voltage regulators are defined as subnodes of the regulators node. A list +of regulators provided by this controller are defined as subnodes of the +drivers node. Each regulator is named according to its regulator type, +buck_<name> and ldo_<name>. The definition for each of these nodes is defined +using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vproc, buck_vsys, buck_vpa +LDO: + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio + +Example: + + pmic: mt6323 { + compatible = "mediatek,mt6323"; + + mt6323regulator: regulators { + compatible = "mediatek,mt6323-regulator"; + + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH V6 1/2] regulator: Add document for MT6323 regulator @ 2016-02-17 11:37 ` John Crispin 0 siblings, 0 replies; 21+ messages in thread From: John Crispin @ 2016-02-17 11:37 UTC (permalink / raw) To: Liam Girdwood, Mark Brown, Matthias Brugger Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, John Crispin, devicetree-u79uwXL29TY76Z2rM5mHXA Signed-off-by: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org --- Changes in V6 * remove the compatible string Changes in V5 * regulator vs regulators Changes in V4 * regulator is a subnode and not a property .../bindings/regulator/mt6323-regulator.txt | 241 ++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt new file mode 100644 index 0000000..67c0780 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt @@ -0,0 +1,241 @@ +Mediatek MT6323 Regulator Driver + +All voltage regulators are defined as subnodes of the regulators node. A list +of regulators provided by this controller are defined as subnodes of the +drivers node. Each regulator is named according to its regulator type, +buck_<name> and ldo_<name>. The definition for each of these nodes is defined +using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vproc, buck_vsys, buck_vpa +LDO: + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio + +Example: + + pmic: mt6323 { + compatible = "mediatek,mt6323"; + + mt6323regulator: regulators { + compatible = "mediatek,mt6323-regulator"; + + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH V6 2/2] regulator: mt6323: Add support for MT6323 regulator 2016-02-17 11:37 ` John Crispin @ 2016-02-17 11:37 ` John Crispin -1 siblings, 0 replies; 21+ messages in thread From: John Crispin @ 2016-02-17 11:37 UTC (permalink / raw) To: Liam Girdwood, Mark Brown, Matthias Brugger Cc: linux-kernel, linux-arm-kernel, linux-mediatek, Chen Zhong, John Crispin From: Chen Zhong <chen.zhong@mediatek.com> The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <blogic@openwrt.org> --- Changes in V6 * add back the set/get mode callbacks Changes in V5 * remove the code that modifies constraints * remove the code allows mode changes Changes in V4: * add id_table and of_match_table * use short GPL text * change MODULE_LICENSE to GPL V2 Changes in V3: * none Changes in V2: * send to the the proper maintainer drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6323-regulator.c | 432 ++++++++++++++++++++++++++++ include/linux/regulator/mt6323-regulator.h | 52 ++++ 4 files changed, 494 insertions(+) create mode 100644 drivers/regulator/mt6323-regulator.c create mode 100644 include/linux/regulator/mt6323-regulator.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8155e80..5e49568 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -462,6 +462,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 980b194..8fb55640 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 0000000..28ebbda --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,432 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static const struct of_device_id mt6323_of_match[] = { + { .compatible = "mediatek,mt6323-regulator", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt6323_of_match); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + .of_match_table = of_match_ptr(mt6323_of_match), + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h new file mode 100644 index 0000000..67011cd --- /dev/null +++ b/include/linux/regulator/mt6323-regulator.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6323_H +#define __LINUX_REGULATOR_MT6323_H + +enum { + MT6323_ID_VPROC = 0, + MT6323_ID_VSYS, + MT6323_ID_VPA, + MT6323_ID_VTCXO, + MT6323_ID_VCN28, + MT6323_ID_VCN33_BT, + MT6323_ID_VCN33_WIFI, + MT6323_ID_VA, + MT6323_ID_VCAMA, + MT6323_ID_VIO28 = 9, + MT6323_ID_VUSB, + MT6323_ID_VMC, + MT6323_ID_VMCH, + MT6323_ID_VEMC3V3, + MT6323_ID_VGP1, + MT6323_ID_VGP2, + MT6323_ID_VGP3, + MT6323_ID_VCN18, + MT6323_ID_VSIM1, + MT6323_ID_VSIM2, + MT6323_ID_VRTC, + MT6323_ID_VCAMAF, + MT6323_ID_VIBR, + MT6323_ID_VRF18, + MT6323_ID_VM, + MT6323_ID_VIO18, + MT6323_ID_VCAMD, + MT6323_ID_VCAMIO, + MT6323_ID_RG_MAX, +}; + +#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6323_H */ -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH V6 2/2] regulator: mt6323: Add support for MT6323 regulator @ 2016-02-17 11:37 ` John Crispin 0 siblings, 0 replies; 21+ messages in thread From: John Crispin @ 2016-02-17 11:37 UTC (permalink / raw) To: linux-arm-kernel From: Chen Zhong <chen.zhong@mediatek.com> The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <blogic@openwrt.org> --- Changes in V6 * add back the set/get mode callbacks Changes in V5 * remove the code that modifies constraints * remove the code allows mode changes Changes in V4: * add id_table and of_match_table * use short GPL text * change MODULE_LICENSE to GPL V2 Changes in V3: * none Changes in V2: * send to the the proper maintainer drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6323-regulator.c | 432 ++++++++++++++++++++++++++++ include/linux/regulator/mt6323-regulator.h | 52 ++++ 4 files changed, 494 insertions(+) create mode 100644 drivers/regulator/mt6323-regulator.c create mode 100644 include/linux/regulator/mt6323-regulator.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8155e80..5e49568 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -462,6 +462,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 980b194..8fb55640 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 0000000..28ebbda --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,432 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static const struct of_device_id mt6323_of_match[] = { + { .compatible = "mediatek,mt6323-regulator", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt6323_of_match); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + .of_match_table = of_match_ptr(mt6323_of_match), + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h new file mode 100644 index 0000000..67011cd --- /dev/null +++ b/include/linux/regulator/mt6323-regulator.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6323_H +#define __LINUX_REGULATOR_MT6323_H + +enum { + MT6323_ID_VPROC = 0, + MT6323_ID_VSYS, + MT6323_ID_VPA, + MT6323_ID_VTCXO, + MT6323_ID_VCN28, + MT6323_ID_VCN33_BT, + MT6323_ID_VCN33_WIFI, + MT6323_ID_VA, + MT6323_ID_VCAMA, + MT6323_ID_VIO28 = 9, + MT6323_ID_VUSB, + MT6323_ID_VMC, + MT6323_ID_VMCH, + MT6323_ID_VEMC3V3, + MT6323_ID_VGP1, + MT6323_ID_VGP2, + MT6323_ID_VGP3, + MT6323_ID_VCN18, + MT6323_ID_VSIM1, + MT6323_ID_VSIM2, + MT6323_ID_VRTC, + MT6323_ID_VCAMAF, + MT6323_ID_VIBR, + MT6323_ID_VRF18, + MT6323_ID_VM, + MT6323_ID_VIO18, + MT6323_ID_VCAMD, + MT6323_ID_VCAMIO, + MT6323_ID_RG_MAX, +}; + +#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6323_H */ -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree 2016-02-17 11:37 ` John Crispin (?) @ 2016-02-17 19:13 ` Mark Brown -1 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-02-17 19:13 UTC (permalink / raw) To: Chen Zhong, John Crispin, Mark Brown; +Cc: linux-kernel The patch regulator: mt6323: Add support for MT6323 regulator has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 17871815a825e62bb49d2c6be1a4c9409eb2faac Mon Sep 17 00:00:00 2001 From: Chen Zhong <chen.zhong@mediatek.com> Date: Wed, 17 Feb 2016 12:37:36 +0100 Subject: [PATCH] regulator: mt6323: Add support for MT6323 regulator The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6323-regulator.c | 432 +++++++++++++++++++++++++++++ include/linux/regulator/mt6323-regulator.h | 52 ++++ 4 files changed, 494 insertions(+) create mode 100644 drivers/regulator/mt6323-regulator.c create mode 100644 include/linux/regulator/mt6323-regulator.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8155e80dd3f8..5e49568357b3 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -462,6 +462,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 980b1943fa81..8fb556406c94 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 000000000000..28ebbda7b205 --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,432 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static const struct of_device_id mt6323_of_match[] = { + { .compatible = "mediatek,mt6323-regulator", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt6323_of_match); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + .of_match_table = of_match_ptr(mt6323_of_match), + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h new file mode 100644 index 000000000000..67011cd1ce55 --- /dev/null +++ b/include/linux/regulator/mt6323-regulator.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6323_H +#define __LINUX_REGULATOR_MT6323_H + +enum { + MT6323_ID_VPROC = 0, + MT6323_ID_VSYS, + MT6323_ID_VPA, + MT6323_ID_VTCXO, + MT6323_ID_VCN28, + MT6323_ID_VCN33_BT, + MT6323_ID_VCN33_WIFI, + MT6323_ID_VA, + MT6323_ID_VCAMA, + MT6323_ID_VIO28 = 9, + MT6323_ID_VUSB, + MT6323_ID_VMC, + MT6323_ID_VMCH, + MT6323_ID_VEMC3V3, + MT6323_ID_VGP1, + MT6323_ID_VGP2, + MT6323_ID_VGP3, + MT6323_ID_VCN18, + MT6323_ID_VSIM1, + MT6323_ID_VSIM2, + MT6323_ID_VRTC, + MT6323_ID_VCAMAF, + MT6323_ID_VIBR, + MT6323_ID_VRF18, + MT6323_ID_VM, + MT6323_ID_VIO18, + MT6323_ID_VCAMD, + MT6323_ID_VCAMIO, + MT6323_ID_RG_MAX, +}; + +#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6323_H */ -- 2.7.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree 2016-02-17 11:37 ` John Crispin (?) (?) @ 2016-03-15 9:29 ` Mark Brown 2016-03-15 9:32 ` Mark Brown -1 siblings, 1 reply; 21+ messages in thread From: Mark Brown @ 2016-03-15 9:29 UTC (permalink / raw) To: Chen Zhong, John Crispin, Mark Brown; +Cc: linux-kernel The patch regulator: mt6323: Add support for MT6323 regulator has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 17871815a825e62bb49d2c6be1a4c9409eb2faac Mon Sep 17 00:00:00 2001 From: Chen Zhong <chen.zhong@mediatek.com> Date: Wed, 17 Feb 2016 12:37:36 +0100 Subject: [PATCH] regulator: mt6323: Add support for MT6323 regulator The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6323-regulator.c | 432 +++++++++++++++++++++++++++++ include/linux/regulator/mt6323-regulator.h | 52 ++++ 4 files changed, 494 insertions(+) create mode 100644 drivers/regulator/mt6323-regulator.c create mode 100644 include/linux/regulator/mt6323-regulator.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8155e80dd3f8..5e49568357b3 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -462,6 +462,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 980b1943fa81..8fb556406c94 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 000000000000..28ebbda7b205 --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,432 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static const struct of_device_id mt6323_of_match[] = { + { .compatible = "mediatek,mt6323-regulator", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt6323_of_match); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + .of_match_table = of_match_ptr(mt6323_of_match), + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h new file mode 100644 index 000000000000..67011cd1ce55 --- /dev/null +++ b/include/linux/regulator/mt6323-regulator.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6323_H +#define __LINUX_REGULATOR_MT6323_H + +enum { + MT6323_ID_VPROC = 0, + MT6323_ID_VSYS, + MT6323_ID_VPA, + MT6323_ID_VTCXO, + MT6323_ID_VCN28, + MT6323_ID_VCN33_BT, + MT6323_ID_VCN33_WIFI, + MT6323_ID_VA, + MT6323_ID_VCAMA, + MT6323_ID_VIO28 = 9, + MT6323_ID_VUSB, + MT6323_ID_VMC, + MT6323_ID_VMCH, + MT6323_ID_VEMC3V3, + MT6323_ID_VGP1, + MT6323_ID_VGP2, + MT6323_ID_VGP3, + MT6323_ID_VCN18, + MT6323_ID_VSIM1, + MT6323_ID_VSIM2, + MT6323_ID_VRTC, + MT6323_ID_VCAMAF, + MT6323_ID_VIBR, + MT6323_ID_VRF18, + MT6323_ID_VM, + MT6323_ID_VIO18, + MT6323_ID_VCAMD, + MT6323_ID_VCAMIO, + MT6323_ID_RG_MAX, +}; + +#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6323_H */ -- 2.7.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree 2016-03-15 9:29 ` Mark Brown @ 2016-03-15 9:32 ` Mark Brown 2016-03-15 9:52 ` John Crispin 0 siblings, 1 reply; 21+ messages in thread From: Mark Brown @ 2016-03-15 9:32 UTC (permalink / raw) To: Chen Zhong, John Crispin; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 433 bytes --] On Tue, Mar 15, 2016 at 09:29:10AM +0000, Mark Brown wrote: > The patch > > regulator: mt6323: Add support for MT6323 regulator > > has been applied to the regulator tree at > > git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git Sorry, this is my scripts not coping with dropped branches - the issue with the MFD changes not being there is still a thing. Please resend when that is resolved. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 473 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree 2016-03-15 9:32 ` Mark Brown @ 2016-03-15 9:52 ` John Crispin 0 siblings, 0 replies; 21+ messages in thread From: John Crispin @ 2016-03-15 9:52 UTC (permalink / raw) To: Mark Brown, Chen Zhong; +Cc: linux-kernel On 15/03/2016 10:32, Mark Brown wrote: > On Tue, Mar 15, 2016 at 09:29:10AM +0000, Mark Brown wrote: >> The patch >> >> regulator: mt6323: Add support for MT6323 regulator >> >> has been applied to the regulator tree at >> >> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git > > Sorry, this is my scripts not coping with dropped branches - the issue > with the MFD changes not being there is still a thing. Please resend > when that is resolved. > i pinged lee about this and he said he had 400 + patches in his queue that he first had to handle so i figured i'd wait till RC1 and then send the patches to you, again., would that be ok ? John ^ permalink raw reply [flat|nested] 21+ messages in thread
* Applied "regulator: Add document for MT6323 regulator" to the regulator tree 2016-02-17 11:37 ` John Crispin ` (2 preceding siblings ...) (?) @ 2016-02-17 19:13 ` Mark Brown -1 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-02-17 19:13 UTC (permalink / raw) To: John Crispin, Mark Brown; +Cc: linux-kernel The patch regulator: Add document for MT6323 regulator has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 3e6c0a0745b50d0051de7425e33e0afe07d4d6df Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Wed, 17 Feb 2016 12:37:35 +0100 Subject: [PATCH] regulator: Add document for MT6323 regulator Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- .../bindings/regulator/mt6323-regulator.txt | 241 +++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt new file mode 100644 index 000000000000..67c0780967fc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt @@ -0,0 +1,241 @@ +Mediatek MT6323 Regulator Driver + +All voltage regulators are defined as subnodes of the regulators node. A list +of regulators provided by this controller are defined as subnodes of the +drivers node. Each regulator is named according to its regulator type, +buck_<name> and ldo_<name>. The definition for each of these nodes is defined +using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vproc, buck_vsys, buck_vpa +LDO: + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio + +Example: + + pmic: mt6323 { + compatible = "mediatek,mt6323"; + + mt6323regulator: regulators { + compatible = "mediatek,mt6323-regulator"; + + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; -- 2.7.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH V6 1/2] regulator: Add document for MT6323 regulator 2016-02-17 11:37 ` John Crispin @ 2016-02-18 14:36 ` Rob Herring -1 siblings, 0 replies; 21+ messages in thread From: Rob Herring @ 2016-02-18 14:36 UTC (permalink / raw) To: John Crispin Cc: Liam Girdwood, Mark Brown, Matthias Brugger, linux-kernel, linux-arm-kernel, linux-mediatek, devicetree On Wed, Feb 17, 2016 at 12:37:35PM +0100, John Crispin wrote: > Signed-off-by: John Crispin <blogic@openwrt.org> > Cc: devicetree@vger.kernel.org > > --- > Changes in V6 > * remove the compatible string > > Changes in V5 > * regulator vs regulators > > Changes in V4 > * regulator is a subnode and not a property > > .../bindings/regulator/mt6323-regulator.txt | 241 ++++++++++++++++++++ > 1 file changed, 241 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt > > diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt > new file mode 100644 > index 0000000..67c0780 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt > @@ -0,0 +1,241 @@ > +Mediatek MT6323 Regulator Driver > + > +All voltage regulators are defined as subnodes of the regulators node. A list > +of regulators provided by this controller are defined as subnodes of the > +drivers node. Each regulator is named according to its regulator type, s/drivers/PMIC's/ > +buck_<name> and ldo_<name>. The definition for each of these nodes is defined > +using the standard binding for regulators at > +Documentation/devicetree/bindings/regulator/regulator.txt. > + > +The valid names for regulators are:: > +BUCK: > + buck_vproc, buck_vsys, buck_vpa > +LDO: > + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, > + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, > + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, > + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio > + > +Example: > + > + pmic: mt6323 { > + compatible = "mediatek,mt6323"; > + > + mt6323regulator: regulators { > + compatible = "mediatek,mt6323-regulator"; Still have the compatible here... Otherwise: Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH V6 1/2] regulator: Add document for MT6323 regulator @ 2016-02-18 14:36 ` Rob Herring 0 siblings, 0 replies; 21+ messages in thread From: Rob Herring @ 2016-02-18 14:36 UTC (permalink / raw) To: linux-arm-kernel On Wed, Feb 17, 2016 at 12:37:35PM +0100, John Crispin wrote: > Signed-off-by: John Crispin <blogic@openwrt.org> > Cc: devicetree at vger.kernel.org > > --- > Changes in V6 > * remove the compatible string > > Changes in V5 > * regulator vs regulators > > Changes in V4 > * regulator is a subnode and not a property > > .../bindings/regulator/mt6323-regulator.txt | 241 ++++++++++++++++++++ > 1 file changed, 241 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt > > diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt > new file mode 100644 > index 0000000..67c0780 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt > @@ -0,0 +1,241 @@ > +Mediatek MT6323 Regulator Driver > + > +All voltage regulators are defined as subnodes of the regulators node. A list > +of regulators provided by this controller are defined as subnodes of the > +drivers node. Each regulator is named according to its regulator type, s/drivers/PMIC's/ > +buck_<name> and ldo_<name>. The definition for each of these nodes is defined > +using the standard binding for regulators at > +Documentation/devicetree/bindings/regulator/regulator.txt. > + > +The valid names for regulators are:: > +BUCK: > + buck_vproc, buck_vsys, buck_vpa > +LDO: > + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, > + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, > + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, > + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio > + > +Example: > + > + pmic: mt6323 { > + compatible = "mediatek,mt6323"; > + > + mt6323regulator: regulators { > + compatible = "mediatek,mt6323-regulator"; Still have the compatible here... Otherwise: Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH V6 1/2] regulator: Add document for MT6323 regulator 2016-02-18 14:36 ` Rob Herring @ 2016-02-18 14:50 ` John Crispin -1 siblings, 0 replies; 21+ messages in thread From: John Crispin @ 2016-02-18 14:50 UTC (permalink / raw) To: Rob Herring Cc: devicetree, Liam Girdwood, linux-kernel, Mark Brown, linux-mediatek, Matthias Brugger, linux-arm-kernel On 18/02/2016 15:36, Rob Herring wrote: > On Wed, Feb 17, 2016 at 12:37:35PM +0100, John Crispin wrote: >> Signed-off-by: John Crispin <blogic@openwrt.org> >> Cc: devicetree@vger.kernel.org >> >> --- >> Changes in V6 >> * remove the compatible string >> >> Changes in V5 >> * regulator vs regulators >> >> Changes in V4 >> * regulator is a subnode and not a property >> >> .../bindings/regulator/mt6323-regulator.txt | 241 ++++++++++++++++++++ >> 1 file changed, 241 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt >> >> diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt >> new file mode 100644 >> index 0000000..67c0780 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt >> @@ -0,0 +1,241 @@ >> +Mediatek MT6323 Regulator Driver >> + >> +All voltage regulators are defined as subnodes of the regulators node. A list >> +of regulators provided by this controller are defined as subnodes of the >> +drivers node. Each regulator is named according to its regulator type, > > s/drivers/PMIC's/ > >> +buck_<name> and ldo_<name>. The definition for each of these nodes is defined >> +using the standard binding for regulators at >> +Documentation/devicetree/bindings/regulator/regulator.txt. >> + >> +The valid names for regulators are:: >> +BUCK: >> + buck_vproc, buck_vsys, buck_vpa >> +LDO: >> + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, >> + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, >> + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, >> + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio >> + >> +Example: >> + >> + pmic: mt6323 { >> + compatible = "mediatek,mt6323"; >> + >> + mt6323regulator: regulators { >> + compatible = "mediatek,mt6323-regulator"; > > Still have the compatible here... > > Otherwise: > > Acked-by: Rob Herring <robh@kernel.org> > grml, i only removed one of the compat strings and did not notice there are two. do you want me to send a fixup that you can fold into the one you already merged or do you want me to resend just this one patch with the fix applied ? John > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek > ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH V6 1/2] regulator: Add document for MT6323 regulator @ 2016-02-18 14:50 ` John Crispin 0 siblings, 0 replies; 21+ messages in thread From: John Crispin @ 2016-02-18 14:50 UTC (permalink / raw) To: linux-arm-kernel On 18/02/2016 15:36, Rob Herring wrote: > On Wed, Feb 17, 2016 at 12:37:35PM +0100, John Crispin wrote: >> Signed-off-by: John Crispin <blogic@openwrt.org> >> Cc: devicetree at vger.kernel.org >> >> --- >> Changes in V6 >> * remove the compatible string >> >> Changes in V5 >> * regulator vs regulators >> >> Changes in V4 >> * regulator is a subnode and not a property >> >> .../bindings/regulator/mt6323-regulator.txt | 241 ++++++++++++++++++++ >> 1 file changed, 241 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt >> >> diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt >> new file mode 100644 >> index 0000000..67c0780 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt >> @@ -0,0 +1,241 @@ >> +Mediatek MT6323 Regulator Driver >> + >> +All voltage regulators are defined as subnodes of the regulators node. A list >> +of regulators provided by this controller are defined as subnodes of the >> +drivers node. Each regulator is named according to its regulator type, > > s/drivers/PMIC's/ > >> +buck_<name> and ldo_<name>. The definition for each of these nodes is defined >> +using the standard binding for regulators at >> +Documentation/devicetree/bindings/regulator/regulator.txt. >> + >> +The valid names for regulators are:: >> +BUCK: >> + buck_vproc, buck_vsys, buck_vpa >> +LDO: >> + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, >> + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, >> + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, >> + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio >> + >> +Example: >> + >> + pmic: mt6323 { >> + compatible = "mediatek,mt6323"; >> + >> + mt6323regulator: regulators { >> + compatible = "mediatek,mt6323-regulator"; > > Still have the compatible here... > > Otherwise: > > Acked-by: Rob Herring <robh@kernel.org> > grml, i only removed one of the compat strings and did not notice there are two. do you want me to send a fixup that you can fold into the one you already merged or do you want me to resend just this one patch with the fix applied ? John > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH V6 1/2] regulator: Add document for MT6323 regulator @ 2016-02-21 0:38 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-02-21 0:38 UTC (permalink / raw) To: John Crispin Cc: Liam Girdwood, Matthias Brugger, linux-kernel, linux-arm-kernel, linux-mediatek, devicetree [-- Attachment #1: Type: text/plain, Size: 462 bytes --] On Wed, Feb 17, 2016 at 12:37:35PM +0100, John Crispin wrote: > Signed-off-by: John Crispin <blogic@openwrt.org> > Cc: devicetree@vger.kernel.org ...and dropped due to the dependency on MFD changes that you didn't mention :/ I can't apply this without a pull request from Lee with the MFD changes for the chip that I can depend on, there's no separate Kconfig symbol and the MFD is already merged causing build failures (you've had mail from 0day about that). [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 473 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH V6 1/2] regulator: Add document for MT6323 regulator @ 2016-02-21 0:38 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-02-21 0:38 UTC (permalink / raw) To: linux-arm-kernel On Wed, Feb 17, 2016 at 12:37:35PM +0100, John Crispin wrote: > Signed-off-by: John Crispin <blogic@openwrt.org> > Cc: devicetree at vger.kernel.org ...and dropped due to the dependency on MFD changes that you didn't mention :/ I can't apply this without a pull request from Lee with the MFD changes for the chip that I can depend on, there's no separate Kconfig symbol and the MFD is already merged causing build failures (you've had mail from 0day about that). -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 473 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160221/81493bbd/attachment.sig> ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH V6 1/2] regulator: Add document for MT6323 regulator @ 2016-02-21 0:38 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-02-21 0:38 UTC (permalink / raw) To: John Crispin Cc: Liam Girdwood, Matthias Brugger, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA [-- Attachment #1: Type: text/plain, Size: 514 bytes --] On Wed, Feb 17, 2016 at 12:37:35PM +0100, John Crispin wrote: > Signed-off-by: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> > Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org ...and dropped due to the dependency on MFD changes that you didn't mention :/ I can't apply this without a pull request from Lee with the MFD changes for the chip that I can depend on, there's no separate Kconfig symbol and the MFD is already merged causing build failures (you've had mail from 0day about that). [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 473 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Applied "regulator: Add document for MT6323 regulator" to the regulator tree 2016-02-17 11:37 ` John Crispin ` (5 preceding siblings ...) (?) @ 2016-03-15 9:29 ` Mark Brown -1 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-03-15 9:29 UTC (permalink / raw) To: John Crispin, Mark Brown; +Cc: linux-kernel The patch regulator: Add document for MT6323 regulator has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 3e6c0a0745b50d0051de7425e33e0afe07d4d6df Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Wed, 17 Feb 2016 12:37:35 +0100 Subject: [PATCH] regulator: Add document for MT6323 regulator Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- .../bindings/regulator/mt6323-regulator.txt | 241 +++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt new file mode 100644 index 000000000000..67c0780967fc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt @@ -0,0 +1,241 @@ +Mediatek MT6323 Regulator Driver + +All voltage regulators are defined as subnodes of the regulators node. A list +of regulators provided by this controller are defined as subnodes of the +drivers node. Each regulator is named according to its regulator type, +buck_<name> and ldo_<name>. The definition for each of these nodes is defined +using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vproc, buck_vsys, buck_vpa +LDO: + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama, + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2, + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr, + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio + +Example: + + pmic: mt6323 { + compatible = "mediatek,mt6323"; + + mt6323regulator: regulators { + compatible = "mediatek,mt6323-regulator"; + + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; -- 2.7.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH V10 2/2] regulator: mt6323: Add support for MT6323 regulator @ 2016-07-18 12:40 John Crispin 2016-07-18 12:46 ` Mark Brown 0 siblings, 1 reply; 21+ messages in thread From: John Crispin @ 2016-07-18 12:40 UTC (permalink / raw) To: Liam Girdwood, Mark Brown Cc: linux-kernel, linux-mediatek, linux-arm-kernel, Chen Zhong, John Crispin From: Chen Zhong <chen.zhong@mediatek.com> The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <john@phrozen.org> --- This series was dropped from the v4.7 queue to avoid a merge conflict with the series adding mt6323 support to the MFD driver. These patches were merged during the v4.7 window, so this series is good to go for v4.8. The relevant series started with commit feec4799ac4d ("mfd: mt6397: int_con and int_status may vary ...") through to commit 44760cf3bf0a ("mfd: mt6397: Add MT6323 support to MT6397 driver") Changes in V10 * use correct SoB * drop compatible string from devicetree binding Changes in V6 * add back the set/get mode callbacks Changes in V5 * remove the code that modifies constraints * remove the code allows mode changes Changes in V4: * add id_table and of_match_table * use short GPL text * change MODULE_LICENSE to GPL V2 Changes in V2: * send to the the proper maintainer drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6323-regulator.c | 425 ++++++++++++++++++++++++++++ include/linux/regulator/mt6323-regulator.h | 52 ++++ 4 files changed, 487 insertions(+) create mode 100644 drivers/regulator/mt6323-regulator.c create mode 100644 include/linux/regulator/mt6323-regulator.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index ae9cbd6..6c88e31 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -498,6 +498,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 85a1d44..f3da9ee 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 0000000..927cc23 --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,425 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h new file mode 100644 index 0000000..67011cd --- /dev/null +++ b/include/linux/regulator/mt6323-regulator.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6323_H +#define __LINUX_REGULATOR_MT6323_H + +enum { + MT6323_ID_VPROC = 0, + MT6323_ID_VSYS, + MT6323_ID_VPA, + MT6323_ID_VTCXO, + MT6323_ID_VCN28, + MT6323_ID_VCN33_BT, + MT6323_ID_VCN33_WIFI, + MT6323_ID_VA, + MT6323_ID_VCAMA, + MT6323_ID_VIO28 = 9, + MT6323_ID_VUSB, + MT6323_ID_VMC, + MT6323_ID_VMCH, + MT6323_ID_VEMC3V3, + MT6323_ID_VGP1, + MT6323_ID_VGP2, + MT6323_ID_VGP3, + MT6323_ID_VCN18, + MT6323_ID_VSIM1, + MT6323_ID_VSIM2, + MT6323_ID_VRTC, + MT6323_ID_VCAMAF, + MT6323_ID_VIBR, + MT6323_ID_VRF18, + MT6323_ID_VM, + MT6323_ID_VIO18, + MT6323_ID_VCAMD, + MT6323_ID_VCAMIO, + MT6323_ID_RG_MAX, +}; + +#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6323_H */ -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree 2016-07-18 12:40 [PATCH V10 2/2] regulator: mt6323: Add support for MT6323 regulator John Crispin 2016-07-18 12:46 ` Mark Brown @ 2016-07-18 12:46 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-07-18 12:46 UTC (permalink / raw) To: Chen Zhong Cc: John Crispin, Mark Brown, Liam Girdwood, Mark Brown, linux-kernel, linux-mediatek, linux-arm-kernel, John Crispin The patch regulator: mt6323: Add support for MT6323 regulator has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 2fdf829236183e5be559a2b4d13c29926b79b2d4 Mon Sep 17 00:00:00 2001 From: Chen Zhong <chen.zhong@mediatek.com> Date: Mon, 18 Jul 2016 14:40:51 +0200 Subject: [PATCH] regulator: mt6323: Add support for MT6323 regulator The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6323-regulator.c | 425 +++++++++++++++++++++++++++++ include/linux/regulator/mt6323-regulator.h | 52 ++++ 4 files changed, 487 insertions(+) create mode 100644 drivers/regulator/mt6323-regulator.c create mode 100644 include/linux/regulator/mt6323-regulator.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 144cbf5b3e5a..53b30b46c1c5 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -498,6 +498,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 85a1d44a3939..f3da9eea9ab6 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 000000000000..927cc23b1c30 --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,425 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h new file mode 100644 index 000000000000..67011cd1ce55 --- /dev/null +++ b/include/linux/regulator/mt6323-regulator.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6323_H +#define __LINUX_REGULATOR_MT6323_H + +enum { + MT6323_ID_VPROC = 0, + MT6323_ID_VSYS, + MT6323_ID_VPA, + MT6323_ID_VTCXO, + MT6323_ID_VCN28, + MT6323_ID_VCN33_BT, + MT6323_ID_VCN33_WIFI, + MT6323_ID_VA, + MT6323_ID_VCAMA, + MT6323_ID_VIO28 = 9, + MT6323_ID_VUSB, + MT6323_ID_VMC, + MT6323_ID_VMCH, + MT6323_ID_VEMC3V3, + MT6323_ID_VGP1, + MT6323_ID_VGP2, + MT6323_ID_VGP3, + MT6323_ID_VCN18, + MT6323_ID_VSIM1, + MT6323_ID_VSIM2, + MT6323_ID_VRTC, + MT6323_ID_VCAMAF, + MT6323_ID_VIBR, + MT6323_ID_VRF18, + MT6323_ID_VM, + MT6323_ID_VIO18, + MT6323_ID_VCAMD, + MT6323_ID_VCAMIO, + MT6323_ID_RG_MAX, +}; + +#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6323_H */ -- 2.8.1 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree @ 2016-07-18 12:46 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-07-18 12:46 UTC (permalink / raw) To: linux-arm-kernel The patch regulator: mt6323: Add support for MT6323 regulator has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 2fdf829236183e5be559a2b4d13c29926b79b2d4 Mon Sep 17 00:00:00 2001 From: Chen Zhong <chen.zhong@mediatek.com> Date: Mon, 18 Jul 2016 14:40:51 +0200 Subject: [PATCH] regulator: mt6323: Add support for MT6323 regulator The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6323-regulator.c | 425 +++++++++++++++++++++++++++++ include/linux/regulator/mt6323-regulator.h | 52 ++++ 4 files changed, 487 insertions(+) create mode 100644 drivers/regulator/mt6323-regulator.c create mode 100644 include/linux/regulator/mt6323-regulator.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 144cbf5b3e5a..53b30b46c1c5 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -498,6 +498,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 85a1d44a3939..f3da9eea9ab6 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 000000000000..927cc23b1c30 --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,425 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h new file mode 100644 index 000000000000..67011cd1ce55 --- /dev/null +++ b/include/linux/regulator/mt6323-regulator.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6323_H +#define __LINUX_REGULATOR_MT6323_H + +enum { + MT6323_ID_VPROC = 0, + MT6323_ID_VSYS, + MT6323_ID_VPA, + MT6323_ID_VTCXO, + MT6323_ID_VCN28, + MT6323_ID_VCN33_BT, + MT6323_ID_VCN33_WIFI, + MT6323_ID_VA, + MT6323_ID_VCAMA, + MT6323_ID_VIO28 = 9, + MT6323_ID_VUSB, + MT6323_ID_VMC, + MT6323_ID_VMCH, + MT6323_ID_VEMC3V3, + MT6323_ID_VGP1, + MT6323_ID_VGP2, + MT6323_ID_VGP3, + MT6323_ID_VCN18, + MT6323_ID_VSIM1, + MT6323_ID_VSIM2, + MT6323_ID_VRTC, + MT6323_ID_VCAMAF, + MT6323_ID_VIBR, + MT6323_ID_VRF18, + MT6323_ID_VM, + MT6323_ID_VIO18, + MT6323_ID_VCAMD, + MT6323_ID_VCAMIO, + MT6323_ID_RG_MAX, +}; + +#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6323_H */ -- 2.8.1 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree @ 2016-07-18 12:46 ` Mark Brown 0 siblings, 0 replies; 21+ messages in thread From: Mark Brown @ 2016-07-18 12:46 UTC (permalink / raw) To: Chen Zhong; +Cc: John Crispin, Mark Brown, Liam Girdwood The patch regulator: mt6323: Add support for MT6323 regulator has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 2fdf829236183e5be559a2b4d13c29926b79b2d4 Mon Sep 17 00:00:00 2001 From: Chen Zhong <chen.zhong@mediatek.com> Date: Mon, 18 Jul 2016 14:40:51 +0200 Subject: [PATCH] regulator: mt6323: Add support for MT6323 regulator The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6323-regulator.c | 425 +++++++++++++++++++++++++++++ include/linux/regulator/mt6323-regulator.h | 52 ++++ 4 files changed, 487 insertions(+) create mode 100644 drivers/regulator/mt6323-regulator.c create mode 100644 include/linux/regulator/mt6323-regulator.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 144cbf5b3e5a..53b30b46c1c5 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -498,6 +498,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 85a1d44a3939..f3da9eea9ab6 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 000000000000..927cc23b1c30 --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,425 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h new file mode 100644 index 000000000000..67011cd1ce55 --- /dev/null +++ b/include/linux/regulator/mt6323-regulator.h @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6323_H +#define __LINUX_REGULATOR_MT6323_H + +enum { + MT6323_ID_VPROC = 0, + MT6323_ID_VSYS, + MT6323_ID_VPA, + MT6323_ID_VTCXO, + MT6323_ID_VCN28, + MT6323_ID_VCN33_BT, + MT6323_ID_VCN33_WIFI, + MT6323_ID_VA, + MT6323_ID_VCAMA, + MT6323_ID_VIO28 = 9, + MT6323_ID_VUSB, + MT6323_ID_VMC, + MT6323_ID_VMCH, + MT6323_ID_VEMC3V3, + MT6323_ID_VGP1, + MT6323_ID_VGP2, + MT6323_ID_VGP3, + MT6323_ID_VCN18, + MT6323_ID_VSIM1, + MT6323_ID_VSIM2, + MT6323_ID_VRTC, + MT6323_ID_VCAMAF, + MT6323_ID_VIBR, + MT6323_ID_VRF18, + MT6323_ID_VM, + MT6323_ID_VIO18, + MT6323_ID_VCAMD, + MT6323_ID_VCAMIO, + MT6323_ID_RG_MAX, +}; + +#define MT6323_MAX_REGULATOR MT6323_ID_RG_MAX + +#endif /* __LINUX_REGULATOR_MT6323_H */ -- 2.8.1 ^ permalink raw reply related [flat|nested] 21+ messages in thread
end of thread, other threads:[~2016-07-18 12:47 UTC | newest] Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-02-17 11:37 [PATCH V6 1/2] regulator: Add document for MT6323 regulator John Crispin 2016-02-17 11:37 ` John Crispin 2016-02-17 11:37 ` John Crispin 2016-02-17 11:37 ` [PATCH V6 2/2] regulator: mt6323: Add support " John Crispin 2016-02-17 11:37 ` John Crispin 2016-02-17 19:13 ` Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree Mark Brown 2016-03-15 9:29 ` Mark Brown 2016-03-15 9:32 ` Mark Brown 2016-03-15 9:52 ` John Crispin 2016-02-17 19:13 ` Applied "regulator: Add document " Mark Brown 2016-02-18 14:36 ` [PATCH V6 1/2] regulator: Add document for MT6323 regulator Rob Herring 2016-02-18 14:36 ` Rob Herring 2016-02-18 14:50 ` John Crispin 2016-02-18 14:50 ` John Crispin 2016-02-21 0:38 ` Mark Brown 2016-02-21 0:38 ` Mark Brown 2016-02-21 0:38 ` Mark Brown 2016-03-15 9:29 ` Applied "regulator: Add document for MT6323 regulator" to the regulator tree Mark Brown 2016-07-18 12:40 [PATCH V10 2/2] regulator: mt6323: Add support for MT6323 regulator John Crispin 2016-07-18 12:46 ` Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree Mark Brown 2016-07-18 12:46 ` Mark Brown 2016-07-18 12:46 ` Mark Brown
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.