[git:media_tree/master] [media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid

[git:media_tree/master] [media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid

[Mauro Carvalho Chehab]

This is an automatic generated email to let you know that the following patch were queued:

Subject: [media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid
Author:  Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Date:    Sun Sep 4 10:06:39 2016 -0300

This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

 drivers/media/usb/cx231xx/cx231xx-cards.c | 2 +-
 drivers/media/usb/cx231xx/cx231xx-core.c  | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

---

diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index c63248a18823..72c246bfaa1c 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -486,7 +486,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.output_mode = OUT_MODE_VIP11,
 		.demod_xfer_mode = 0,
 		.ctl_pin_status_mask = 0xFFFFFFC4,
-		.agc_analog_digital_select_gpio = 0x00,	/* According with PV cxPolaris.inf file */
+		.agc_analog_digital_select_gpio = 0x1c,
 		.tuner_sif_gpio = -1,
 		.tuner_scl_gpio = -1,
 		.tuner_sda_gpio = -1,
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 7e4319172e46..97730cb2f591 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -712,6 +712,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 			break;
 		case CX231XX_BOARD_CNXT_RDE_253S:
 		case CX231XX_BOARD_CNXT_RDU_253S:
+		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
 			break;
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
@@ -738,7 +739,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
 		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
-		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
+			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 			break;
 		default:
 			break;