[U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions

[U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions

[Jagan Teki]

Series add new dts nodes like gmac, usb, io_domains and fixed existing
regulator, pmic stuff as per schematic. 

Changes for v2:
- Collect Acked-by and Reviewed-by tags from Philipp
- Add eMMC boot support
- Add missing commit message
- Remove RK_GPIO8 macro to sync with Linux

Jagan Teki (9):
  ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
  ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
  ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
  ARM: dts: rockchip: Add regulators for rk3288-vyasa
  ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
  rockchip: rk3288-vyasa: defconfig: Enable gmac support
  ARM: dts: rockchip: Add usb host for rk3288-vyasa
  ARM: dts: rockchip: Add usb otg for rk3288-vyasa
  rk3288: vyasa: Add eMMC boot support

 arch/arm/dts/rk3288-vyasa-u-boot.dtsi     |  33 ++++
 arch/arm/dts/rk3288-vyasa.dts             | 303 +++++++++++++++++++++++-------
 board/amarula/vyasa-rk3288/MAINTAINERS    |   2 +
 board/amarula/vyasa-rk3288/vyasa-rk3288.c |   7 +
 configs/vyasa-rk3288_defconfig            |   3 +
 5 files changed, 277 insertions(+), 71 deletions(-)
 create mode 100644 arch/arm/dts/rk3288-vyasa-u-boot.dtsi

-- 
2.7.4

[U-Boot] [PATCH v2 1/9] ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux

[Jagan Teki]

Sync rk3288-vyasa board dts from Linux for proper updates and maintenance
- rk3288-vyasa.dts: Similar to Linux dts
- rk3288-vyasa-u-boot.dtsi: u-boot dts changes

Also updated MAINTAINERS for these dts files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
 arch/arm/dts/rk3288-vyasa-u-boot.dtsi  |  29 +++++++
 arch/arm/dts/rk3288-vyasa.dts          | 134 ++++++++++++++++++---------------
 board/amarula/vyasa-rk3288/MAINTAINERS |   2 +
 3 files changed, 105 insertions(+), 60 deletions(-)
 create mode 100644 arch/arm/dts/rk3288-vyasa-u-boot.dtsi

diff --git a/arch/arm/dts/rk3288-vyasa-u-boot.dtsi b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
new file mode 100644
index 0000000..b3a56e9
--- /dev/null
+++ b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	/* Add a dummy value to cause of-platdata think this is bytes */
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index 93a9c5e..932311c 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -52,8 +52,8 @@
 	};
 
 	memory {
+		reg = <0x0 0x0 0x0 0x80000000>;
 		device_type = "memory";
-		reg = <0 0x80000000>;
 	};
 
 	vcc_sd: sdmmc-regulator {
@@ -78,22 +78,20 @@
 	};
 };
 
-&dmc {
-	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
-		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
-		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
-		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
-		0x5 0x0>;
-	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
-		0xa60 0x40 0x10 0x0>;
-	/* Add a dummy value to cause of-platdata think this is bytes */
-	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
-};
-
 &cpu0 {
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -103,12 +101,12 @@
 		reg = <0x1b>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int &global_pwroff>;
-		wakeup-source;
 		rockchip,system-power-controller;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
+		wakeup-source;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
@@ -124,22 +122,22 @@
 
 		regulators {
 			vdd_cpu: vdd_log: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vdd_log";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt = <1350000>;
-				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
 			};
 
 			vdd_gpu: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vdd_gpu";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1000000>;
@@ -147,20 +145,20 @@
 			};
 
 			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc_ddr";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 				};
 			};
 
 			vcc_io: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc_io";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3300000>;
@@ -168,11 +166,11 @@
 			};
 
 			vcca_tp: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc_tp";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_tp";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3300000>;
@@ -180,22 +178,22 @@
 			};
 
 			vcc_codec: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc_codec";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_codec";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
 			};
 
 			vdd_10: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vdd_10";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1000000>;
@@ -203,11 +201,11 @@
 			};
 
 			vcc_gps: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc_gps";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_gps";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1800000>;
@@ -215,11 +213,11 @@
 			};
 
 			vccio_sd: LDO_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vccio_sd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3300000>;
@@ -227,11 +225,11 @@
 			};
 
 			vcc10_lcd: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc10_lcd";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
-				regulator-name = "vcc10_lcd";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1800000>;
@@ -239,11 +237,11 @@
 			};
 
 			vcc_18: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc_18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1800000>;
@@ -251,11 +249,11 @@
 			};
 
 			vcc18_lcd: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc18_lcd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1800000>;
@@ -263,22 +261,22 @@
 			};
 
 			vcc33_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc33_sd";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc33_sd";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 				};
 			};
 
 			vcc_lan: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
+				regulator-name = "vcc_lan";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_lan";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 				};
@@ -287,10 +285,11 @@
 	};
 };
 
-&sdmmc {
-	u-boot,dm-pre-reloc;
+&i2c2 {
 	status = "okay";
+};
 
+&sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
@@ -300,10 +299,26 @@
 	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
 	vmmc-supply = <&vcc_sd>;
 	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
 };
 
 &uart2 {
-	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
 	status = "okay";
 };
 
@@ -312,7 +327,6 @@
 };
 
 &pinctrl {
-	u-boot,dm-pre-reloc;
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/board/amarula/vyasa-rk3288/MAINTAINERS b/board/amarula/vyasa-rk3288/MAINTAINERS
index 10397fc..08ea208 100644
--- a/board/amarula/vyasa-rk3288/MAINTAINERS
+++ b/board/amarula/vyasa-rk3288/MAINTAINERS
@@ -4,3 +4,5 @@ S:	Maintained
 F:	board/amarula/vyasa-rk3288
 F:	include/configs/vyasa-rk3288.h
 F:	configs/vyasa-rk3288_defconfig
+F:	arch/arm/dts/rk3288-vyasa.dts
+F:	arch/arm/dts/rk3288-vyasa-u-boot.dtsi
-- 
2.7.4

[U-Boot] [U-Boot, v2, 1/9] ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux

[Philipp Tomsich]

> Sync rk3288-vyasa board dts from Linux for proper updates and maintenance
> - rk3288-vyasa.dts: Similar to Linux dts
> - rk3288-vyasa-u-boot.dtsi: u-boot dts changes
> 
> Also updated MAINTAINERS for these dts files.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>  arch/arm/dts/rk3288-vyasa-u-boot.dtsi  |  29 +++++++
>  arch/arm/dts/rk3288-vyasa.dts          | 134 ++++++++++++++++++---------------
>  board/amarula/vyasa-rk3288/MAINTAINERS |   2 +
>  3 files changed, 105 insertions(+), 60 deletions(-)
>  create mode 100644 arch/arm/dts/rk3288-vyasa-u-boot.dtsi
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 2/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1

[Jagan Teki]

vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so
remove the same and update the regulator-name as 'vdd_arm' to sync
with existing rk3288 board dts files.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
 arch/arm/dts/rk3288-vyasa.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index 932311c..6a74eb4 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -121,8 +121,8 @@
 		vcc12-supply = <&vcc_io>;
 
 		regulators {
-			vdd_cpu: vdd_log: DCDC_REG1 {
-				regulator-name = "vdd_log";
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
-- 
2.7.4

[U-Boot] [U-Boot, v2, 2/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1

[Philipp Tomsich]

> vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so
> remove the same and update the regulator-name as 'vdd_arm' to sync
> with existing rk3288 board dts files.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>  arch/arm/dts/rk3288-vyasa.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC

[Jagan Teki]

rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd,
so use the same by renaming vcc33_sd to vcc_sd(as per schematic)
and drop explicit regulator definition from root.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
 arch/arm/dts/rk3288-vyasa.dts | 22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index 6a74eb4..aff3cd4 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -56,18 +56,6 @@
 		device_type = "memory";
 	};
 
-	vcc_sd: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr>;
-		regulator-name = "vcc_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -260,8 +248,8 @@
 				};
 			};
 
-			vcc33_sd: SWITCH_REG1 {
-				regulator-name = "vcc33_sd";
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
@@ -332,10 +320,4 @@
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
-
-	sdmmc {
-		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
 };
-- 
2.7.4

[U-Boot] [U-Boot, v2, 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC

[Philipp Tomsich]

> rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd,
> so use the same by renaming vcc33_sd to vcc_sd(as per schematic)
> and drop explicit regulator definition from root.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>  arch/arm/dts/rk3288-vyasa.dts | 22 ++--------------------
>  1 file changed, 2 insertions(+), 20 deletions(-)
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa

[Jagan Teki]

Add supporting regulators for rk3288-vyasa board, dc12_vbat is
parent regulatorand followed regulators as are child regulators.
regulator naming conversion followed as per schematic for better
readability and easy for identification.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
 arch/arm/dts/rk3288-vyasa.dts | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index aff3cd4..f56e10c 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -56,13 +56,53 @@
 		device_type = "memory";
 	};
 
+	dc12_vbat: dc12-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "dc12_vbat";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vboot_3v3: vboot-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vboot_5v: vboot-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_sv";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	v3g_3v3: v3g-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3g_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
 	};
 };
 
-- 
2.7.4

[U-Boot] [U-Boot, v2, 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa

[Philipp Tomsich]

> Add supporting regulators for rk3288-vyasa board, dc12_vbat is
> parent regulatorand followed regulators as are child regulators.
> regulator naming conversion followed as per schematic for better
> readability and easy for identification.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>  arch/arm/dts/rk3288-vyasa.dts | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board

[Jagan Teki]

Sync gmac dts node from Linux.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/dts/rk3288-vyasa.dts | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index f56e10c..47fdd91 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -104,12 +104,35 @@
 		regulator-boot-on;
 		vin-supply = <&dc12_vbat>;
 	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
 };
 
 &cpu0 {
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu>;
 	status = "okay";
@@ -355,6 +378,24 @@
 };
 
 &pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
-- 
2.7.4

[U-Boot] [U-Boot, v2, 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board

[Philipp Tomsich]

> Sync gmac dts node from Linux.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  arch/arm/dts/rk3288-vyasa.dts | 41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 

Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

[U-Boot] [U-Boot, v2, 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board

[Philipp Tomsich]

> Sync gmac dts node from Linux.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>  arch/arm/dts/rk3288-vyasa.dts | 41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 6/9] rockchip: rk3288-vyasa: defconfig: Enable gmac support

[Jagan Teki]

Enable gmac support for rk3288-vyasa board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
 configs/vyasa-rk3288_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
index 4c76041..24a955a 100644
--- a/configs/vyasa-rk3288_defconfig
+++ b/configs/vyasa-rk3288_defconfig
@@ -45,6 +45,9 @@ CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 # CONFIG_SPL_PINCTRL_FULL is not set
-- 
2.7.4

[U-Boot] [U-Boot, v2, 6/9] rockchip: rk3288-vyasa: defconfig: Enable gmac support

[Philipp Tomsich]

> Enable gmac support for rk3288-vyasa board.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>  configs/vyasa-rk3288_defconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa

[Jagan Teki]

Add usb host support for rk3288-vyasa, board support hub power
through phy_pwr_en and usb2 host power through usb2_pwr_en and
naming conversion followed as per schematic.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
 arch/arm/dts/rk3288-vyasa.dts | 48 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index 47fdd91..fe680e2 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -105,6 +105,30 @@
 		vin-supply = <&dc12_vbat>;
 	};
 
+	vsus_5v: vsus-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vsus_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vusb2_5v: vusb2-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb2_5v";
+		enable-active-high;
+		gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
 	ext_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -357,6 +381,20 @@
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy_pwr_en>;
+	status = "okay";
+};
+
 &vopb {
 	status = "okay";
 };
@@ -401,4 +439,14 @@
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	usb_host {
+		phy_pwr_en: phy-pwr-en {
+			rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		usb2_pwr_en: usb2-pwr-en {
+			rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
-- 
2.7.4

[U-Boot] [U-Boot, v2, 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa

[Philipp Tomsich]

> Add usb host support for rk3288-vyasa, board support hub power
> through phy_pwr_en and usb2 host power through usb2_pwr_en and
> naming conversion followed as per schematic.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>  arch/arm/dts/rk3288-vyasa.dts | 48 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 8/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa

[Jagan Teki]

Add usb otg support for rk3288-vyasa, board support usb1 otg
power through otg_vbus_drv and naming conversion followed
as per schematic.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
 arch/arm/dts/rk3288-vyasa.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index fe680e2..70c433f 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -115,6 +115,20 @@
 		vin-supply = <&vcc_io>;
 	};
 
+	vusb1_5v: vusb1-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb1_5v";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
 	vusb2_5v: vusb2-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vusb2_5v";
@@ -395,6 +409,10 @@
 	status = "okay";
 };
 
+&usb_otg {
+	status = "okay";
+};
+
 &vopb {
 	status = "okay";
 };
@@ -449,4 +467,11 @@
 			rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+
+		};
+	};
 };
-- 
2.7.4

[U-Boot] [U-Boot, v2, 8/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa

[Philipp Tomsich]

> Add usb otg support for rk3288-vyasa, board support usb1 otg
> power through otg_vbus_drv and naming conversion followed
> as per schematic.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>  arch/arm/dts/rk3288-vyasa.dts | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 9/9] rk3288: vyasa: Add eMMC boot support

[Jagan Teki]

RK3288 Vyasa has eMMC boot support, with JP4 open.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Note:
Linux patch for this support is in ML.

 arch/arm/dts/rk3288-vyasa-u-boot.dtsi     |  4 ++++
 arch/arm/dts/rk3288-vyasa.dts             | 11 +++++++++++
 board/amarula/vyasa-rk3288/vyasa-rk3288.c |  7 +++++++
 3 files changed, 22 insertions(+)

diff --git a/arch/arm/dts/rk3288-vyasa-u-boot.dtsi b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
index b3a56e9..6017ca2 100644
--- a/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-vyasa-u-boot.dtsi
@@ -20,6 +20,10 @@
 	u-boot,dm-pre-reloc;
 };
 
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
 &uart2 {
 	u-boot,dm-pre-reloc;
 };
diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index 70c433f..850aa25 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -155,6 +155,17 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_MAC>;
 	assigned-clock-parents = <&ext_gmac>;
diff --git a/board/amarula/vyasa-rk3288/vyasa-rk3288.c b/board/amarula/vyasa-rk3288/vyasa-rk3288.c
index 7985671..82f8c4e 100644
--- a/board/amarula/vyasa-rk3288/vyasa-rk3288.c
+++ b/board/amarula/vyasa-rk3288/vyasa-rk3288.c
@@ -9,6 +9,13 @@
 #ifndef CONFIG_TPL_BUILD
 #include <spl.h>
 
+void board_boot_order(u32 *spl_boot_list)
+{
+	/* eMMC prior to sdcard. */
+	spl_boot_list[0] = BOOT_DEVICE_MMC2;
+	spl_boot_list[1] = BOOT_DEVICE_MMC1;
+}
+
 int spl_start_uboot(void)
 {
         /* break into full u-boot on 'c' */
-- 
2.7.4

[U-Boot] [U-Boot,v2,9/9] rk3288: vyasa: Add eMMC boot support

[Philipp Tomsich]

> RK3288 Vyasa has eMMC boot support, with JP4 open.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Note:
> Linux patch for this support is in ML.
> 
>  arch/arm/dts/rk3288-vyasa-u-boot.dtsi     |  4 ++++
>  arch/arm/dts/rk3288-vyasa.dts             | 11 +++++++++++
>  board/amarula/vyasa-rk3288/vyasa-rk3288.c |  7 +++++++
>  3 files changed, 22 insertions(+)
> 

Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

[U-Boot] [U-Boot,v2,9/9] rk3288: vyasa: Add eMMC boot support

[Philipp Tomsich]

> RK3288 Vyasa has eMMC boot support, with JP4 open.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Note:
> Linux patch for this support is in ML.
> 
>  arch/arm/dts/rk3288-vyasa-u-boot.dtsi     |  4 ++++
>  arch/arm/dts/rk3288-vyasa.dts             | 11 +++++++++++
>  board/amarula/vyasa-rk3288/vyasa-rk3288.c |  7 +++++++
>  3 files changed, 22 insertions(+)
> 

Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

[U-Boot] [U-Boot,v2,9/9] rk3288: vyasa: Add eMMC boot support

[Philipp Tomsich]

> RK3288 Vyasa has eMMC boot support, with JP4 open.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
> Note:
> Linux patch for this support is in ML.
> 
>  arch/arm/dts/rk3288-vyasa-u-boot.dtsi     |  4 ++++
>  arch/arm/dts/rk3288-vyasa.dts             | 11 +++++++++++
>  board/amarula/vyasa-rk3288/vyasa-rk3288.c |  7 +++++++
>  3 files changed, 22 insertions(+)
> 

Applied to u-boot-rockchip/next, thanks!

[U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions

[Jagan Teki]

Philipp,

On Wed, Feb 14, 2018 at 9:26 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> Series add new dts nodes like gmac, usb, io_domains and fixed existing
> regulator, pmic stuff as per schematic.
>
> Changes for v2:
> - Collect Acked-by and Reviewed-by tags from Philipp
> - Add eMMC boot support
> - Add missing commit message
> - Remove RK_GPIO8 macro to sync with Linux
>
> Jagan Teki (9):
>   ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
>   ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
>   ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
>   ARM: dts: rockchip: Add regulators for rk3288-vyasa
>   ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
>   rockchip: rk3288-vyasa: defconfig: Enable gmac support
>   ARM: dts: rockchip: Add usb host for rk3288-vyasa
>   ARM: dts: rockchip: Add usb otg for rk3288-vyasa
>   rk3288: vyasa: Add eMMC boot support

Can you pick this series, it's been there in ML from few releases.

[U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions

[Dr. Philipp Tomsich]

> On 23 Feb 2018, at 16:17, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> 
> Philipp,
> 
> On Wed, Feb 14, 2018 at 9:26 PM, Jagan Teki <jagannadh.teki at gmail.com <mailto:jagannadh.teki@gmail.com>> wrote:
>> Series add new dts nodes like gmac, usb, io_domains and fixed existing
>> regulator, pmic stuff as per schematic.
>> 
>> Changes for v2:
>> - Collect Acked-by and Reviewed-by tags from Philipp
>> - Add eMMC boot support
>> - Add missing commit message
>> - Remove RK_GPIO8 macro to sync with Linux
>> 
>> Jagan Teki (9):
>>  ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
>>  ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
>>  ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
>>  ARM: dts: rockchip: Add regulators for rk3288-vyasa
>>  ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
>>  rockchip: rk3288-vyasa: defconfig: Enable gmac support
>>  ARM: dts: rockchip: Add usb host for rk3288-vyasa
>>  ARM: dts: rockchip: Add usb otg for rk3288-vyasa
>>  rk3288: vyasa: Add eMMC boot support
> 
> Can you pick this series, it's been there in ML from few releases.


These have been sent only after rc2 was tagged and are on my todo-list
for next (so they should go at the start of the merge window, when I send
out the pull-request to get our next merged back onto master).

Thanks,
Philipp.

[U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions

[Jagan Teki]

On 23-Feb-2018 8:53 PM, "Dr. Philipp Tomsich" <
philipp.tomsich@theobroma-systems.com> wrote:


On 23 Feb 2018, at 16:17, Jagan Teki <jagannadh.teki@gmail.com> wrote:

Philipp,

On Wed, Feb 14, 2018 at 9:26 PM, Jagan Teki <jagannadh.teki@gmail.com>
wrote:

Series add new dts nodes like gmac, usb, io_domains and fixed existing
regulator, pmic stuff as per schematic.

Changes for v2:
- Collect Acked-by and Reviewed-by tags from Philipp
- Add eMMC boot support
- Add missing commit message
- Remove RK_GPIO8 macro to sync with Linux

Jagan Teki (9):
 ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
 ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
 ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
 ARM: dts: rockchip: Add regulators for rk3288-vyasa
 ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
 rockchip: rk3288-vyasa: defconfig: Enable gmac support
 ARM: dts: rockchip: Add usb host for rk3288-vyasa
 ARM: dts: rockchip: Add usb otg for rk3288-vyasa
 rk3288: vyasa: Add eMMC boot support


Can you pick this series, it's been there in ML from few releases.


These have been sent only after rc2 was tagged and are on my todo-list
for next (so they should go at the start of the merge window, when I send
out the pull-request to get our next merged back onto master).


This this V2 initial version been from 11/17, ie reason for ping.

[U-Boot] [PATCH v2 0/9] rockchip: rk3288-vyasa: dts fixes/additions

[Dr. Philipp Tomsich]

> On 23 Feb 2018, at 16:29, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> 
> 
> 
> On 23-Feb-2018 8:53 PM, "Dr. Philipp Tomsich" <philipp.tomsich at theobroma-systems.com <mailto:philipp.tomsich@theobroma-systems.com>> wrote:
> 
>> On 23 Feb 2018, at 16:17, Jagan Teki <jagannadh.teki at gmail.com <mailto:jagannadh.teki@gmail.com>> wrote:
>> 
>> Philipp,
>> 
>> On Wed, Feb 14, 2018 at 9:26 PM, Jagan Teki <jagannadh.teki at gmail.com <mailto:jagannadh.teki@gmail.com>> wrote:
>>> Series add new dts nodes like gmac, usb, io_domains and fixed existing
>>> regulator, pmic stuff as per schematic.
>>> 
>>> Changes for v2:
>>> - Collect Acked-by and Reviewed-by tags from Philipp
>>> - Add eMMC boot support
>>> - Add missing commit message
>>> - Remove RK_GPIO8 macro to sync with Linux
>>> 
>>> Jagan Teki (9):
>>>  ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux
>>>  ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1
>>>  ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC
>>>  ARM: dts: rockchip: Add regulators for rk3288-vyasa
>>>  ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
>>>  rockchip: rk3288-vyasa: defconfig: Enable gmac support
>>>  ARM: dts: rockchip: Add usb host for rk3288-vyasa
>>>  ARM: dts: rockchip: Add usb otg for rk3288-vyasa
>>>  rk3288: vyasa: Add eMMC boot support
>> 
>> Can you pick this series, it's been there in ML from few releases.
> 
> 
> These have been sent only after rc2 was tagged and are on my todo-list
> for next (so they should go at the start of the merge window, when I send
> out the pull-request to get our next merged back onto master).
> 
> This this V2 initial version been from 11/17, ie reason for ping.

Just for future reference: I usually start processing a series once I have a final
version.  I’ve burned my fingers on merging vendor patches in the past after
rc1 had been out.

So my modus operandi now is: once v1 has its status in ‘changes requested’
I won’t track this until I get a newer version that can be merged. And if such a
version comes in after rc2, I’ll try to err on the safe side…
… OTOH, if you just barely miss a merge window and need it in rc2, you should
ping me right away.

Hope this helps,
Phil.

P.S.: I have you TPL fix on Travis right now...