From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> To: Lars Povlsen <lars.povlsen@microchip.com>, Steen Hegelund <Steen.Hegelund@microchip.com> Cc: "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, UNGLinuxDriver@microchip.com, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH net-next 3/3] net: sparx5: use phylink_generic_validate() Date: Tue, 16 Nov 2021 10:02:11 +0000 [thread overview] Message-ID: <E1mmvI3-0078WO-RN@rmk-PC.armlinux.org.uk> (raw) In-Reply-To: <YZOBiFK8DkYUSRml@shell.armlinux.org.uk> Sparx5 has no special behaviour in its validation implementation, so can be switched to phylink_generic_validate(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- .../ethernet/microchip/sparx5/sparx5_main.c | 3 + .../microchip/sparx5/sparx5_phylink.c | 60 +------------------ 2 files changed, 4 insertions(+), 59 deletions(-) diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c index 3cb6c1fe43ff..16266275dd36 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c @@ -292,6 +292,9 @@ static int sparx5_create_port(struct sparx5 *sparx5, spx5_port->phylink_config.dev = &spx5_port->ndev->dev; spx5_port->phylink_config.type = PHYLINK_NETDEV; spx5_port->phylink_config.pcs_poll = true; + spx5_port->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | + MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD | + MAC_2500FD | MAC_5000FD | MAC_10000FD | MAC_25000FD; __set_bit(PHY_INTERFACE_MODE_SGMII, spx5_port->phylink_config.supported_interfaces); diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c index e77ddded4811..8ba33bc1a001 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c @@ -26,64 +26,6 @@ static bool port_conf_has_changed(struct sparx5_port_config *a, struct sparx5_po return false; } -static void sparx5_phylink_validate(struct phylink_config *config, - unsigned long *supported, - struct phylink_link_state *state) -{ - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - switch (state->interface) { - case PHY_INTERFACE_MODE_5GBASER: - phylink_set(mask, 5000baseT_Full); - break; - - case PHY_INTERFACE_MODE_10GBASER: - phylink_set(mask, 10000baseT_Full); - phylink_set(mask, 10000baseCR_Full); - phylink_set(mask, 10000baseSR_Full); - phylink_set(mask, 10000baseLR_Full); - phylink_set(mask, 10000baseLRM_Full); - phylink_set(mask, 10000baseER_Full); - break; - - case PHY_INTERFACE_MODE_25GBASER: - phylink_set(mask, 25000baseCR_Full); - phylink_set(mask, 25000baseSR_Full); - break; - - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_QSGMII: - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - break; - - case PHY_INTERFACE_MODE_1000BASEX: - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - break; - - case PHY_INTERFACE_MODE_2500BASEX: - phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 2500baseX_Full); - break; - - default: - linkmode_zero(supported); - return; - } - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); -} - static void sparx5_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) @@ -187,7 +129,7 @@ const struct phylink_pcs_ops sparx5_phylink_pcs_ops = { }; const struct phylink_mac_ops sparx5_phylink_mac_ops = { - .validate = sparx5_phylink_validate, + .validate = phylink_generic_validate, .mac_config = sparx5_phylink_mac_config, .mac_link_down = sparx5_phylink_mac_link_down, .mac_link_up = sparx5_phylink_mac_link_up, -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> To: Lars Povlsen <lars.povlsen@microchip.com>, Steen Hegelund <Steen.Hegelund@microchip.com> Cc: "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, UNGLinuxDriver@microchip.com, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH net-next 3/3] net: sparx5: use phylink_generic_validate() Date: Tue, 16 Nov 2021 10:02:11 +0000 [thread overview] Message-ID: <E1mmvI3-0078WO-RN@rmk-PC.armlinux.org.uk> (raw) In-Reply-To: <YZOBiFK8DkYUSRml@shell.armlinux.org.uk> Sparx5 has no special behaviour in its validation implementation, so can be switched to phylink_generic_validate(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- .../ethernet/microchip/sparx5/sparx5_main.c | 3 + .../microchip/sparx5/sparx5_phylink.c | 60 +------------------ 2 files changed, 4 insertions(+), 59 deletions(-) diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c index 3cb6c1fe43ff..16266275dd36 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c @@ -292,6 +292,9 @@ static int sparx5_create_port(struct sparx5 *sparx5, spx5_port->phylink_config.dev = &spx5_port->ndev->dev; spx5_port->phylink_config.type = PHYLINK_NETDEV; spx5_port->phylink_config.pcs_poll = true; + spx5_port->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | + MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD | + MAC_2500FD | MAC_5000FD | MAC_10000FD | MAC_25000FD; __set_bit(PHY_INTERFACE_MODE_SGMII, spx5_port->phylink_config.supported_interfaces); diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c index e77ddded4811..8ba33bc1a001 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c @@ -26,64 +26,6 @@ static bool port_conf_has_changed(struct sparx5_port_config *a, struct sparx5_po return false; } -static void sparx5_phylink_validate(struct phylink_config *config, - unsigned long *supported, - struct phylink_link_state *state) -{ - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - switch (state->interface) { - case PHY_INTERFACE_MODE_5GBASER: - phylink_set(mask, 5000baseT_Full); - break; - - case PHY_INTERFACE_MODE_10GBASER: - phylink_set(mask, 10000baseT_Full); - phylink_set(mask, 10000baseCR_Full); - phylink_set(mask, 10000baseSR_Full); - phylink_set(mask, 10000baseLR_Full); - phylink_set(mask, 10000baseLRM_Full); - phylink_set(mask, 10000baseER_Full); - break; - - case PHY_INTERFACE_MODE_25GBASER: - phylink_set(mask, 25000baseCR_Full); - phylink_set(mask, 25000baseSR_Full); - break; - - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_QSGMII: - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - break; - - case PHY_INTERFACE_MODE_1000BASEX: - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - break; - - case PHY_INTERFACE_MODE_2500BASEX: - phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 2500baseX_Full); - break; - - default: - linkmode_zero(supported); - return; - } - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); -} - static void sparx5_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) @@ -187,7 +129,7 @@ const struct phylink_pcs_ops sparx5_phylink_pcs_ops = { }; const struct phylink_mac_ops sparx5_phylink_mac_ops = { - .validate = sparx5_phylink_validate, + .validate = phylink_generic_validate, .mac_config = sparx5_phylink_mac_config, .mac_link_down = sparx5_phylink_mac_link_down, .mac_link_up = sparx5_phylink_mac_link_up, -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-16 10:02 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-16 10:01 [PATCH net-next 0/3] net: sparx5: phylink validate implementation updates Russell King (Oracle) 2021-11-16 10:01 ` Russell King (Oracle) 2021-11-16 10:02 ` [PATCH net-next 1/3] net: sparx5: populate supported_interfaces member Russell King (Oracle) 2021-11-16 10:02 ` Russell King (Oracle) 2021-11-16 10:02 ` [PATCH net-next 2/3] net: sparx5: clean up sparx5_phylink_validate() Russell King (Oracle) 2021-11-16 10:02 ` Russell King (Oracle) 2021-11-16 10:02 ` Russell King (Oracle) [this message] 2021-11-16 10:02 ` [PATCH net-next 3/3] net: sparx5: use phylink_generic_validate() Russell King (Oracle) 2021-11-17 11:30 ` [PATCH net-next 0/3] net: sparx5: phylink validate implementation updates patchwork-bot+netdevbpf 2021-11-17 11:30 ` patchwork-bot+netdevbpf
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=E1mmvI3-0078WO-RN@rmk-PC.armlinux.org.uk \ --to=rmk+kernel@armlinux.org.uk \ --cc=Steen.Hegelund@microchip.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=davem@davemloft.net \ --cc=kuba@kernel.org \ --cc=lars.povlsen@microchip.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=netdev@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.