* [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
@ 2020-07-18 5:40 ` Christian Hewitt
0 siblings, 0 replies; 9+ messages in thread
From: Christian Hewitt @ 2020-07-18 5:40 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5
I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
to silence the error, then (re)add it to the VIM3L dts.
Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 1 -
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 4 ++++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 27408c10a811..ddfd52b88002 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -293,7 +293,6 @@
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr50;
max-frequency = <100000000>;
non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6..026b21708b07 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -88,6 +88,10 @@
status = "okay";
};
+&sd_emmc_a {
+ sd-uhs-sdr50;
+};
+
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
@ 2020-07-18 5:40 ` Christian Hewitt
0 siblings, 0 replies; 9+ messages in thread
From: Christian Hewitt @ 2020-07-18 5:40 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5
I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
to silence the error, then (re)add it to the VIM3L dts.
Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 1 -
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 4 ++++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 27408c10a811..ddfd52b88002 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -293,7 +293,6 @@
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr50;
max-frequency = <100000000>;
non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6..026b21708b07 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -88,6 +88,10 @@
status = "okay";
};
+&sd_emmc_a {
+ sd-uhs-sdr50;
+};
+
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
@ 2020-07-18 5:40 ` Christian Hewitt
0 siblings, 0 replies; 9+ messages in thread
From: Christian Hewitt @ 2020-07-18 5:40 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
tuning errors on VIM3 after a few hours uptime:
[12483.917391] mmc0: tuning execution failed: -5
[30535.551221] mmc0: tuning execution failed: -5
[35359.953671] mmc0: tuning execution failed: -5
[35561.875332] mmc0: tuning execution failed: -5
[61733.348709] mmc0: tuning execution failed: -5
I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
to silence the error, then (re)add it to the VIM3L dts.
Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 1 -
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 4 ++++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 27408c10a811..ddfd52b88002 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -293,7 +293,6 @@
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr50;
max-frequency = <100000000>;
non-removable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6..026b21708b07 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -88,6 +88,10 @@
status = "okay";
};
+&sd_emmc_a {
+ sd-uhs-sdr50;
+};
+
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
2020-07-18 5:40 ` Christian Hewitt
(?)
@ 2020-07-20 22:24 ` Kevin Hilman
-1 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2020-07-20 22:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Christian Hewitt <christianshewitt@gmail.com> writes:
> Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
> tuning errors on VIM3 after a few hours uptime:
>
> [12483.917391] mmc0: tuning execution failed: -5
> [30535.551221] mmc0: tuning execution failed: -5
> [35359.953671] mmc0: tuning execution failed: -5
> [35561.875332] mmc0: tuning execution failed: -5
> [61733.348709] mmc0: tuning execution failed: -5
>
> I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
> to silence the error, then (re)add it to the VIM3L dts.
>
> Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
Fixes?
Kevin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
@ 2020-07-20 22:24 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2020-07-20 22:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Christian Hewitt <christianshewitt@gmail.com> writes:
> Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
> tuning errors on VIM3 after a few hours uptime:
>
> [12483.917391] mmc0: tuning execution failed: -5
> [30535.551221] mmc0: tuning execution failed: -5
> [35359.953671] mmc0: tuning execution failed: -5
> [35561.875332] mmc0: tuning execution failed: -5
> [61733.348709] mmc0: tuning execution failed: -5
>
> I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
> to silence the error, then (re)add it to the VIM3L dts.
>
> Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
Fixes?
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
@ 2020-07-20 22:24 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2020-07-20 22:24 UTC (permalink / raw)
To: Christian Hewitt, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt
Christian Hewitt <christianshewitt@gmail.com> writes:
> Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
> tuning errors on VIM3 after a few hours uptime:
>
> [12483.917391] mmc0: tuning execution failed: -5
> [30535.551221] mmc0: tuning execution failed: -5
> [35359.953671] mmc0: tuning execution failed: -5
> [35561.875332] mmc0: tuning execution failed: -5
> [61733.348709] mmc0: tuning execution failed: -5
>
> I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
> to silence the error, then (re)add it to the VIM3L dts.
>
> Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
Fixes?
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
2020-07-20 22:24 ` Kevin Hilman
(?)
@ 2020-07-21 1:58 ` Christian Hewitt
-1 siblings, 0 replies; 9+ messages in thread
From: Christian Hewitt @ 2020-07-21 1:58 UTC (permalink / raw)
To: Kevin Hilman
Cc: Rob Herring, Mark Rutland, devicetree, linux-arm-kernel,
linux-amlogic, linux-kernel
> On 21 Jul 2020, at 2:24 am, Kevin Hilman <khilman@baylibre.com> wrote:
>
> Christian Hewitt <christianshewitt@gmail.com> writes:
>
>> Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
>> tuning errors on VIM3 after a few hours uptime:
>>
>> [12483.917391] mmc0: tuning execution failed: -5
>> [30535.551221] mmc0: tuning execution failed: -5
>> [35359.953671] mmc0: tuning execution failed: -5
>> [35561.875332] mmc0: tuning execution failed: -5
>> [61733.348709] mmc0: tuning execution failed: -5
>>
>> I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
>> to silence the error, then (re)add it to the VIM3L dts.
>>
>> Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
>
> Fixes?
>
> Kevin
I’ll resend v2 with the fixes tag(s). Thanks.
Christian
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
@ 2020-07-21 1:58 ` Christian Hewitt
0 siblings, 0 replies; 9+ messages in thread
From: Christian Hewitt @ 2020-07-21 1:58 UTC (permalink / raw)
To: Kevin Hilman
Cc: Mark Rutland, devicetree, linux-kernel, Rob Herring,
linux-amlogic, linux-arm-kernel
> On 21 Jul 2020, at 2:24 am, Kevin Hilman <khilman@baylibre.com> wrote:
>
> Christian Hewitt <christianshewitt@gmail.com> writes:
>
>> Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
>> tuning errors on VIM3 after a few hours uptime:
>>
>> [12483.917391] mmc0: tuning execution failed: -5
>> [30535.551221] mmc0: tuning execution failed: -5
>> [35359.953671] mmc0: tuning execution failed: -5
>> [35561.875332] mmc0: tuning execution failed: -5
>> [61733.348709] mmc0: tuning execution failed: -5
>>
>> I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
>> to silence the error, then (re)add it to the VIM3L dts.
>>
>> Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
>
> Fixes?
>
> Kevin
I’ll resend v2 with the fixes tag(s). Thanks.
Christian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
@ 2020-07-21 1:58 ` Christian Hewitt
0 siblings, 0 replies; 9+ messages in thread
From: Christian Hewitt @ 2020-07-21 1:58 UTC (permalink / raw)
To: Kevin Hilman
Cc: Mark Rutland, devicetree, linux-kernel, Rob Herring,
linux-amlogic, linux-arm-kernel
> On 21 Jul 2020, at 2:24 am, Kevin Hilman <khilman@baylibre.com> wrote:
>
> Christian Hewitt <christianshewitt@gmail.com> writes:
>
>> Similar to other G12B devices using the W400 dtsi, I see reports of mmc0
>> tuning errors on VIM3 after a few hours uptime:
>>
>> [12483.917391] mmc0: tuning execution failed: -5
>> [30535.551221] mmc0: tuning execution failed: -5
>> [35359.953671] mmc0: tuning execution failed: -5
>> [35561.875332] mmc0: tuning execution failed: -5
>> [61733.348709] mmc0: tuning execution failed: -5
>>
>> I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi
>> to silence the error, then (re)add it to the VIM3L dts.
>>
>> Signed-off-by: Chrisitan Hewitt <christianshewitt@gmail.com>
>
> Fixes?
>
> Kevin
I’ll resend v2 with the fixes tag(s). Thanks.
Christian
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-07-21 2:00 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-18 5:40 [PATCH] arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3 Christian Hewitt
2020-07-18 5:40 ` Christian Hewitt
2020-07-18 5:40 ` Christian Hewitt
2020-07-20 22:24 ` Kevin Hilman
2020-07-20 22:24 ` Kevin Hilman
2020-07-20 22:24 ` Kevin Hilman
2020-07-21 1:58 ` Christian Hewitt
2020-07-21 1:58 ` Christian Hewitt
2020-07-21 1:58 ` Christian Hewitt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.