[PATCH] Bluetooth: btbcm: Add entry for BCM43430B0 UART Bluetooth

[PATCH] Bluetooth: btbcm: Add entry for BCM43430B0 UART Bluetooth

[Mikhail Rudenko]

This patch adds the device ID for the BCM43430B0 module, found e.g. in
certain revisions of AMPAK AP6212 chip. The required firmware file is
named 'BCM43430B0.hcd'.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
---
 drivers/bluetooth/btbcm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 1b9743b7f2ef..e5d706ed55ea 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -404,6 +404,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x4217, "BCM4329B1"   },	/* 002.002.023 */
 	{ 0x6106, "BCM4359C0"	},	/* 003.001.006 */
 	{ 0x4106, "BCM4335A0"	},	/* 002.001.006 */
+	{ 0x410c, "BCM43430B0"	},	/* 002.001.012 */
 	{ }
 };
 
-- 
2.31.1

RE: Bluetooth: btbcm: Add entry for BCM43430B0 UART Bluetooth

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 1468 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=479123

---Test result---

##############################
Test: CheckPatch - PASS


##############################
Test: CheckGitLint - PASS


##############################
Test: CheckBuildK - PASS


##############################
Test: CheckTestRunner: Setup - PASS


##############################
Test: CheckTestRunner: l2cap-tester - PASS
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: bnep-tester - PASS
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: mgmt-tester - PASS
Total: 416, Passed: 403 (96.9%), Failed: 0, Not Run: 13

##############################
Test: CheckTestRunner: rfcomm-tester - PASS
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: sco-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: smp-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: userchan-tester - PASS
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0



---
Regards,
Linux Bluetooth


[-- Attachment #2: l2cap-tester.log --]
[-- Type: application/octet-stream, Size: 44230 bytes --]

[-- Attachment #3: bnep-tester.log --]
[-- Type: application/octet-stream, Size: 3557 bytes --]

[-- Attachment #4: mgmt-tester.log --]
[-- Type: application/octet-stream, Size: 546745 bytes --]

[-- Attachment #5: rfcomm-tester.log --]
[-- Type: application/octet-stream, Size: 11677 bytes --]

[-- Attachment #6: sco-tester.log --]
[-- Type: application/octet-stream, Size: 9910 bytes --]

[-- Attachment #7: smp-tester.log --]
[-- Type: application/octet-stream, Size: 11823 bytes --]

[-- Attachment #8: userchan-tester.log --]
[-- Type: application/octet-stream, Size: 5454 bytes --]

Re: [PATCH] Bluetooth: btbcm: Add entry for BCM43430B0 UART Bluetooth

[Marcel Holtmann]

Hi Mikhail,

> This patch adds the device ID for the BCM43430B0 module, found e.g. in
> certain revisions of AMPAK AP6212 chip. The required firmware file is
> named 'BCM43430B0.hcd'.
> 
> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
> ---
> drivers/bluetooth/btbcm.c | 1 +
> 1 file changed, 1 insertion(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel