[Fuego] [PATCH] [PATCH v2] ospf6d: add test cases for ospf6d.

* [Fuego] [PATCH] [PATCH v2] ospf6d: add test cases for ospf6d.
@ 2018-11-15 17:59 Zheng Ruoqin
  2018-11-16  0:46 ` Tim.Bird
  0 siblings, 1 reply; 2+ messages in thread
From: Zheng Ruoqin @ 2018-11-15 17:59 UTC (permalink / raw)
  To: fuego

ospf6d is a routing component that works with the Quagga routing engine.

Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
---
 engine/tests/Functional.ospf6d/data/ospf6d.conf    | 55 +++++++++++++++++
 engine/tests/Functional.ospf6d/data/zebra.conf     | 22 +++++++
 engine/tests/Functional.ospf6d/fuego_test.sh       | 23 +++++++
 engine/tests/Functional.ospf6d/ospf6d_test.sh      |  4 ++
 engine/tests/Functional.ospf6d/parser.py           | 22 +++++++
 engine/tests/Functional.ospf6d/spec.json           |  6 ++
 engine/tests/Functional.ospf6d/test.yaml           | 24 ++++++++
 .../Functional.ospf6d/tests/ospf6d_logfile.sh      | 72 ++++++++++++++++++++++
 .../Functional.ospf6d/tests/ospf6d_pidfile.sh      | 63 +++++++++++++++++++
 engine/tests/Functional.ospf6d/tests/ospf6d_ps.sh  | 62 +++++++++++++++++++
 .../tests/Functional.ospf6d/tests/ospf6d_syslog.sh | 71 +++++++++++++++++++++
 11 files changed, 424 insertions(+)
 create mode 100644 engine/tests/Functional.ospf6d/data/ospf6d.conf
 create mode 100644 engine/tests/Functional.ospf6d/data/zebra.conf
 create mode 100644 engine/tests/Functional.ospf6d/fuego_test.sh
 create mode 100644 engine/tests/Functional.ospf6d/ospf6d_test.sh
 create mode 100644 engine/tests/Functional.ospf6d/parser.py
 create mode 100644 engine/tests/Functional.ospf6d/spec.json
 create mode 100644 engine/tests/Functional.ospf6d/test.yaml
 create mode 100644 engine/tests/Functional.ospf6d/tests/ospf6d_logfile.sh
 create mode 100644 engine/tests/Functional.ospf6d/tests/ospf6d_pidfile.sh
 create mode 100644 engine/tests/Functional.ospf6d/tests/ospf6d_ps.sh
 create mode 100644 engine/tests/Functional.ospf6d/tests/ospf6d_syslog.sh

diff --git a/engine/tests/Functional.ospf6d/data/ospf6d.conf b/engine/tests/Functional.ospf6d/data/ospf6d.conf
new file mode 100644
index 0000000..7a292ce
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/data/ospf6d.conf
@@ -0,0 +1,55 @@
+!
+! Zebra configuration saved from vty
+!   2003/11/28 00:49:49
+!
+hostname ospf6d@plant
+password zebra
+
+log file /var/log/quagga/ospf6d.log
+log syslog informational
+!log stdout
+service advanced-vty
+!
+debug ospf6 neighbor state
+!
+interface fxp0
+ ipv6 ospf6 cost 1
+ ipv6 ospf6 hello-interval 10
+ ipv6 ospf6 dead-interval 40
+ ipv6 ospf6 retransmit-interval 5
+ ipv6 ospf6 priority 0
+ ipv6 ospf6 transmit-delay 1
+ ipv6 ospf6 instance-id 0
+!
+interface lo0
+ ipv6 ospf6 cost 1
+ ipv6 ospf6 hello-interval 10
+ ipv6 ospf6 dead-interval 40
+ ipv6 ospf6 retransmit-interval 5
+ ipv6 ospf6 priority 1
+ ipv6 ospf6 transmit-delay 1
+ ipv6 ospf6 instance-id 0
+!
+router ospf6
+ router-id 255.1.1.1
+ redistribute static route-map static-ospf6
+ interface fxp0 area 0.0.0.0
+!
+access-list access4 permit 127.0.0.1/32
+!
+ipv6 access-list access6 permit 3ffe:501::/32
+ipv6 access-list access6 permit 2001:200::/48
+ipv6 access-list access6 permit ::1/128
+!
+ipv6 prefix-list test-prefix seq 1000 deny any
+!
+route-map static-ospf6 permit 10
+ match ipv6 address prefix-list test-prefix
+ set metric-type type-2
+ set metric 2000
+!
+line vty
+ access-class access4
+ ipv6 access-class access6
+ exec-timeout 0 0
+!
diff --git a/engine/tests/Functional.ospf6d/data/zebra.conf b/engine/tests/Functional.ospf6d/data/zebra.conf
new file mode 100644
index 0000000..7c8c216
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/data/zebra.conf
@@ -0,0 +1,22 @@
+!
+! Zebra configuration saved from vty
+!   2000/01/01 01:54:01
+!
+hostname Router
+password zebra
+enable password zebra
+log file /var/log/quagga/zebra.log
+log syslog informational
+!
+!interface bmap
+!
+!interface xxx
+!
+interface lo
+!
+ip route 192.168.246.0/24 eth0 reject
+!
+!ipv6 forwarding
+!
+line vty
+!
diff --git a/engine/tests/Functional.ospf6d/fuego_test.sh b/engine/tests/Functional.ospf6d/fuego_test.sh
new file mode 100644
index 0000000..01ce0bb
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/fuego_test.sh
@@ -0,0 +1,23 @@
+function test_pre_check {
+    is_on_target_path ospf6d PROGRAM_OSPF6D
+    assert_define PROGRAM_OSPF6D "Missing 'ospf6d' program on target board"
+    is_on_target_path zebra PROGRAM_ZEBRA
+    assert_define PROGRAM_ZEBRA "Missing 'zebra' program on target board"
+}
+
+function test_deploy {
+    put $TEST_HOME/ospf6d_test.sh $BOARD_TESTDIR/fuego.$TESTDIR/
+    put $FUEGO_CORE/engine/scripts/fuego_board_function_lib.sh $BOARD_TESTDIR/fuego.$TESTDIR
+    put -r $TEST_HOME/tests $BOARD_TESTDIR/fuego.$TESTDIR/
+    put -r $TEST_HOME/data $BOARD_TESTDIR/fuego.$TESTDIR/
+    cmd "sed -i 's/!interface xxx/interface $IFETH/' $BOARD_TESTDIR/fuego.$TESTDIR/data/zebra.conf"
+}
+
+function test_run {
+    report "cd $BOARD_TESTDIR/fuego.$TESTDIR; \
+        sh ospf6d_test.sh"
+}
+
+function test_processing {
+    log_compare "$TESTDIR" "0" "TEST-FAIL" "n"
+}
diff --git a/engine/tests/Functional.ospf6d/ospf6d_test.sh b/engine/tests/Functional.ospf6d/ospf6d_test.sh
new file mode 100644
index 0000000..dd5ce37
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/ospf6d_test.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+for i in tests/*.sh; do
+    sh $i
+done
diff --git a/engine/tests/Functional.ospf6d/parser.py b/engine/tests/Functional.ospf6d/parser.py
new file mode 100644
index 0000000..d85abd7
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/parser.py
@@ -0,0 +1,22 @@
+#!/usr/bin/python
+# See common.py for description of command-line arguments
+
+import os, sys, collections
+
+sys.path.insert(0, os.environ['FUEGO_CORE'] + '/engine/scripts/parser')
+import common as plib
+
+measurements = {}
+measurements = collections.OrderedDict()
+
+regex_string = '^ -> (.*): TEST-(.*)$'
+matches = plib.parse_log(regex_string)
+
+if matches:
+    for m in matches:
+        measurements['default.' + m[0]] = 'PASS' if m[1] == 'PASS' else 'FAIL'
+
+# split the output for each testcase
+plib.split_output_per_testcase(regex_string, measurements)
+
+sys.exit(plib.process(measurements))
diff --git a/engine/tests/Functional.ospf6d/spec.json b/engine/tests/Functional.ospf6d/spec.json
new file mode 100644
index 0000000..9e4f509
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/spec.json
@@ -0,0 +1,6 @@
+{
+    "testName": "Functional.ospf6d",
+    "specs": {
+        "default": {}
+    }
+}
diff --git a/engine/tests/Functional.ospf6d/test.yaml b/engine/tests/Functional.ospf6d/test.yaml
new file mode 100644
index 0000000..0b757bd
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/test.yaml
@@ -0,0 +1,24 @@
+fuego_package_version: 1
+name: Functional.ospfd
+description: |
+      ospf6d is a routing component that works with the Quagga routing engine.
+      This is a simple test to examine whether ospf6d can start successfully 
+      and obtain the log. And zebra is the pre-service of ospfd.
+license: BSD-3-Clause
+author: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
+maintainer: Tim Bird <tim.bird@sony.com>
+version: 1.00
+fuego_release: 1
+type: Functional
+tags: ['router']
+params:
+    - IFETH:
+        description: eth interface in your target board, defined in board file
+        example: eth0
+data_files:
+ - ospf6d_test.sh
+ - data
+ - fuego_test.sh
+ - parser.py
+ - spec.json
+ - tests
diff --git a/engine/tests/Functional.ospf6d/tests/ospf6d_logfile.sh b/engine/tests/Functional.ospf6d/tests/ospf6d_logfile.sh
new file mode 100644
index 0000000..a9c7c17
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/tests/ospf6d_logfile.sh
@@ -0,0 +1,72 @@
+#!/bin/sh
+
+#  In the target start ospf6d and zebra, then confirm the log file.
+#  check the /var/log/quagga/ospf6d.log file.
+
+test="logfile"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+
+exec_service_on_target ospf6d stop
+exec_service_on_target zebra stop
+
+if [ ! -d /var/log/quagga ]
+then
+   mkdir /var/log/quagga
+   chown -R quagga:quagga /var/log/quagga
+fi
+
+if [ -f /var/log/quagga/ospf6d.log ]
+then
+   mv /var/log/quagga/ospf6d.log /var/log/quagga/ospf6d.log.bck
+fi
+
+#Backup the config file
+mv /etc/quagga/ospf6d.conf /etc/quagga/ospf6d.conf.bck
+mv /etc/quagga/zebra.conf /etc/quagga/zebra.conf.bck
+
+cp data/ospf6d.conf /etc/quagga/ospf6d.conf
+cp data/zebra.conf /etc/quagga/zebra.conf
+chown quagga:quagga /etc/quagga/*.conf
+
+if exec_service_on_target zebra start
+then
+    echo " -> start of zebra succeeded."
+else
+    echo " -> start of zebra failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if exec_service_on_target ospf6d start
+then
+    echo " -> start of ospf6d succeeded."
+else
+    echo " -> start of ospf6d failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if ls /var/log/quagga/ospf6d.log
+then
+    echo " -> get log file of ospf6d."
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> can't get log file of ospf6d."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+exec_service_on_target ospf6d stop
+exec_service_on_target zebra stop
+
+#Restore the config file
+mv /etc/quagga/ospf6d.conf.bck /etc/quagga/ospf6d.conf
+mv /etc/quagga/zebra.conf.bck /etc/quagga/zebra.conf
+
+if [ -f /var/log/quagga/ospf6d.log.bck ]
+then
+    mv /var/log/quagga/ospf6d.log.bck /var/log/quagga/ospf6d.log
+fi
diff --git a/engine/tests/Functional.ospf6d/tests/ospf6d_pidfile.sh b/engine/tests/Functional.ospf6d/tests/ospf6d_pidfile.sh
new file mode 100644
index 0000000..87319fd
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/tests/ospf6d_pidfile.sh
@@ -0,0 +1,63 @@
+#!/bin/sh
+
+#  In the target start ospf6d and zebra, then confirm the process condition by /var/run/quagga/ospf6d.pid file.
+#  check the keyword "ospf6d".
+
+test="pidfile"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+
+exec_service_on_target ospf6d stop
+exec_service_on_target zebra stop
+rm -f /var/run/quagga/ospf6d.pid
+
+#Backup the config file
+mv /etc/quagga/ospf6d.conf /etc/quagga/ospf6d.conf.bck
+mv /etc/quagga/zebra.conf /etc/quagga/zebra.conf.bck
+
+cp data/ospf6d.conf /etc/quagga/ospf6d.conf
+cp data/zebra.conf /etc/quagga/zebra.conf
+chown quagga:quagga /etc/quagga/*.conf
+
+if exec_service_on_target zebra start
+then
+    echo " -> start of zebra succeeded."
+else
+    echo " -> start of zebra failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if exec_service_on_target ospf6d start
+then
+    echo " -> start of ospf6d succeeded."
+else
+    echo " -> start of ospf6d failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if ls /var/run/quagga/ospf6d.pid
+then
+    echo " -> get the pid of ospf6d."
+else
+    echo " -> can't get the pid of ospf6d."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+exec_service_on_target ospf6d stop
+exec_service_on_target zebra stop
+
+if ls /var/run/quagga/ospf6d.pid
+then
+    echo " -> $test: TEST-FAIL"
+else
+    echo " -> $test: TEST-PASS"
+fi
+
+#Restore the config file
+mv /etc/quagga/ospf6d.conf.bck /etc/quagga/ospf6d.conf
+mv /etc/quagga/zebra.conf.bck /etc/quagga/zebra.conf
diff --git a/engine/tests/Functional.ospf6d/tests/ospf6d_ps.sh b/engine/tests/Functional.ospf6d/tests/ospf6d_ps.sh
new file mode 100644
index 0000000..8575a08
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/tests/ospf6d_ps.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+
+#  In the target start ospf6d and zebra, then confirm the process condition by command ps.
+#  check the keyword "quagga/ospf6d".
+
+test="ps"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+
+exec_service_on_target ospf6d stop
+exec_service_on_target zebra stop
+
+#Backup the config file
+mv /etc/quagga/ospf6d.conf /etc/quagga/ospf6d.conf.bck
+mv /etc/quagga/zebra.conf /etc/quagga/zebra.conf.bck
+
+cp data/ospf6d.conf /etc/quagga/ospf6d.conf
+cp data/zebra.conf /etc/quagga/zebra.conf
+chown quagga:quagga /etc/quagga/*.conf
+
+if exec_service_on_target zebra start
+then
+    echo " -> start of zebra succeeded."
+else
+    echo " -> start of zebra failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if exec_service_on_target ospf6d start
+then
+    echo " -> start of ospf6d succeeded."
+else
+    echo " -> start of ospf6d failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if ps -N a | grep "quagga/[o]spf6d"
+then
+    echo " -> get the pid of ospf6d."
+else
+    echo " -> can't get the pid of ospf6d."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+exec_service_on_target ospf6d stop
+exec_service_on_target zebra stop
+
+if ps -N a | grep "quagga/[o]spf6d"
+then
+    echo " -> $test: TEST-FAIL"
+else
+    echo " -> $test: TEST-PASS"
+fi
+
+#Restore the config file
+mv /etc/quagga/ospf6d.conf.bck /etc/quagga/ospf6d.conf
+mv /etc/quagga/zebra.conf.bck /etc/quagga/zebra.conf
diff --git a/engine/tests/Functional.ospf6d/tests/ospf6d_syslog.sh b/engine/tests/Functional.ospf6d/tests/ospf6d_syslog.sh
new file mode 100644
index 0000000..aa5a0ba
--- /dev/null
+++ b/engine/tests/Functional.ospf6d/tests/ospf6d_syslog.sh
@@ -0,0 +1,71 @@
+#!/bin/sh
+
+#  In the target start ospf6d and zebra.
+#  At the same time, start syslog-ng and check the keyword "ospf6d" in syslog.
+
+test="syslog"
+
+. ./fuego_board_function_lib.sh
+
+set_init_manager
+
+exec_service_on_target ospf6d stop
+exec_service_on_target zebra stop
+exec_service_on_target syslog-ng stop
+
+rm -f /var/run/quagga/ospf6d.pid
+#Backup the config file
+mv /etc/quagga/ospf6d.conf /etc/quagga/ospf6d.conf.bck
+mv /etc/quagga/zebra.conf /etc/quagga/zebra.conf.bck
+#Backup the config file
+mv /var/log/syslog /var/log/syslog.bck
+
+cp data/ospf6d.conf /etc/quagga/ospf6d.conf
+cp data/zebra.conf /etc/quagga/zebra.conf
+chown quagga:quagga /etc/quagga/*.conf
+
+if exec_service_on_target syslog-ng restart
+then
+    echo " -> restart of syslog-ng succeeded."
+else
+    echo " -> restart of syslog-ng failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if exec_service_on_target zebra start
+then
+    echo " -> start of zebra succeeded."
+else
+    echo " -> start of zebra failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if exec_service_on_target ospf6d start
+then
+    echo " -> start of ospf6d succeeded."
+else
+    echo " -> start of ospf6d failed."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+if cat /var/log/syslog | grep "ospf6d"
+then
+    echo " -> get the syslog of ospf6d."
+    echo " -> $test: TEST-PASS"
+else
+    echo " -> can't get the syslog of ospf6d."
+    echo " -> $test: TEST-FAIL"
+    exit
+fi
+
+exec_service_on_target ospf6d stop
+exec_service_on_target zebra stop
+
+#Restore the config file
+mv /etc/quagga/ospf6d.conf.bck /etc/quagga/ospf6d.conf
+mv /etc/quagga/zebra.conf.bck /etc/quagga/zebra.conf
+#Restore the config file
+mv /var/log/syslog.bck /var/log/syslog
-- 
1.8.3.1




^ permalink raw reply related	[flat|nested] 2+ messages in thread