From: Vu Hai NGUYEN <vh.nguyen@actiasodielec.fr>
To: Bartosz Markowski <bartosz.markowski@tieto.com>
Cc: Patrick CARNEIRO RODRIGUEZ <p.carneiro@actiasodielec.fr>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: RE : RE : RE : RE : RE : RE : ath10k: set channel by command "iw" not from hostapd and DFS support of firmware-2.bin_10.1.467.2-1
Date: Fri, 16 May 2014 11:41:52 +0200 [thread overview]
Message-ID: <EE97821C81277E459BEA5C6384C6F241012F109978D7@srvexch01.SODIELEC.local> (raw)
In-Reply-To: <CACKGw+FA-oprMTqg1fVxce86Gq1mghMhE+Y20=EYic3PcS1mSQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4469 bytes --]
>> Yes I'm using backport v3.15 (latest) to build ath10k for my kernel 3.2.36 (provided by Marvell for my Marvell Armada 370 chipset).
>> I also download the folder ath from ath10k master branch (I got problem with seeing information of fw_stats from the version ath10k in backport).
>> Any suggestion? Please feel free to ask me more information if you need :D
>Did you just replace it under your backports folder? Maybe you still
>have CONFIG_ATH10K_DFS_CERTIFIED instead of
>CPTCFG_ATH10K_DFS_CERTIFIED there?
Oh yes thank you, I did it for other define (DEBUG, DEBUGFS, ..) and CONFIG_ATH10K_DFS_CERTIFIED in the file debug.c (that's why I had 3 debug files of DFS) but I did not do it in 2 files wmi.c and mac.c
Now I don't get the error like before but this warning appear:
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: mac monitor vdev 1 started
ath10k: mac monitor started
------------[ cut here ]------------
WARNING: at /home/alberix2/Desktop/Wilinks_ath10k/ACCESS_POINT_APPLI/Source/Driv
er_ath10k/backports-3.15-rc1-1/net/wireless/nl80211.c:5824 nl80211_start_radar_d
etection+0xf8/0x16c [cfg80211]()
Modules linked in: ath10k_pci(O) ath10k_core(O) ath(O) mac80211(O) cfg80211(O) c
ompat(O) arc4 ubifs ubi [last unloaded: compat]
Backtrace:
[<c0011938>] (dump_backtrace+0x0/0x118) from [<c050205c>] (dump_stack+0x18/0x20)
r6:bf64b61f r5:000016c0 r4:00000000 r3:c10bc7ac
[<c0502044>] (dump_stack+0x0/0x20) from [<c0066c38>] (warn_slowpath_common+0x54/
0x70)
[<c0066be4>] (warn_slowpath_common+0x0/0x70) from [<c0066c78>] (warn_slowpath_nu
ll+0x24/0x2c)
r8:00000000 r7:00000000 r6:d2e88000 r5:d27a8000 r4:d2e883c8
r3:00000009
[<c0066c54>] (warn_slowpath_null+0x0/0x2c) from [<bf60fadc>] (nl80211_start_rada
r_detection+0xf8/0x16c [cfg80211])
[<bf60f9e4>] (nl80211_start_radar_detection+0x0/0x16c [cfg80211]) from [<c045348
8>] (genl_rcv_msg+0x1b4/0x1f4)
[<c04532d4>] (genl_rcv_msg+0x0/0x1f4) from [<c0452904>] (netlink_rcv_skb+0x58/0x
b8)
[<c04528ac>] (netlink_rcv_skb+0x0/0xb8) from [<c04532c4>] (genl_rcv+0x20/0x30)
r6:d318fe00 r5:d29afb00 r4:d29afb00 r3:c04532a4
[<c04532a4>] (genl_rcv+0x0/0x30) from [<c04522d0>] (netlink_unicast+0x224/0x2c4)
r4:d0074400 r3:c04532a4
[<c04520ac>] (netlink_unicast+0x0/0x2c4) from [<c04526a4>] (netlink_sendmsg+0x29
0/0x320)
[<c0452414>] (netlink_sendmsg+0x0/0x320) from [<c0428eac>] (sock_sendmsg+0x98/0x
b4)
[<c0428e14>] (sock_sendmsg+0x0/0xb4) from [<c0429150>] (__sys_sendmsg+0x1d0/0x26
c)
r4:d2b9bf64
[<c0428f80>] (__sys_sendmsg+0x0/0x26c) from [<c042ab30>] (sys_sendmsg+0x44/0x68)
[<c042aaec>] (sys_sendmsg+0x0/0x68) from [<c000ddc0>] (ret_fast_syscall+0x0/0x30
)
r6:00134870 r5:4008f9f0 r4:00136660
---[ end trace 4c6338919fa0b3d6 ]---
My iw dev show : channel 52 (5260 MHz), width: 20 MHz, center1: 5260 MHz but I can not connect my station to the access point (seems it does not work yet cause the file "dfs_stats" still show "DFS not enabled" . I had a debug msg with debug mask = 0x432 for ath10k in the attached file if someone are interested in.
Thanks,
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
[-- Attachment #2: debug_mess.txt --]
[-- Type: text/plain, Size: 33466 bytes --]
ath10k: boot suspend complete
ath10k: boot hif stop
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000804
ath10k: boot warm reset complete
ath10k: boot hif power down
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
br0: port 2(wlan0) entering disabled state
ath10k: boot hif power up
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot init ce src ring id 0 entries 16 base_addr d2d61000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2e5a000
ath10k: boot ce dest ring id 2 entries 32 base_addr c0928000
ath10k: boot init ce src ring id 3 entries 32 base_addr d2bbf000
ath10k: boot init ce src ring id 4 entries 4096 base_addr d26e0000
ath10k: boot init ce src ring id 7 entries 2 base_addr d26ef000
ath10k: boot ce dest ring id 7 entries 2 base_addr d26ee000
ath10k: boot waiting target to initialise
ath10k: boot target indicator 0
ath10k: boot target indicator 0
ath10k: boot target indicator 0
ath10k: boot target indicator 2
ath10k: boot target initialised
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: boot upload otp to 0x1234 len 6917
ath10k: bmi fast download address 0x1234 buffer 0xe1ad7034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe1ad7034 length 6916
ath10k: bmi lz data buffer 0xd2b9bd3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi execute result 0x0
ath10k: boot otp execute result 0
ath10k: bmi fast download address 0x1234 buffer 0xe1ad8b44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe1ad8b44 length 190248
ath10k: bmi lz data buffer 0xd2b9bd3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot hif start
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x12e20000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: wmi pdev set param 30 value 1
ath10k: wmi pdev set param 10 value 1
ath10k: wmi pdev set param 1 value 1
ath10k: wmi pdev set param 2 value 1
ath10k: wmi pdev set param 31 value 0
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 0
ath10k: mac vdev create 0 (add interface) type 1 subtype 0
ath10k: WMI vdev create: id 0 type 1 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: vdev param 0 not supported by firmware
ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be
ath10k: wmi pdev set param 13 value 50
ath10k: wmi vdev id 0x0 set param 38 value 3747
ath10k: wmi vdev id 0x0 set param 39 value 3895
ath10k: wmi vdev id 0x0 set param 40 value 3900
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 1
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: mac config channel 2412MHz flags 0x1a0 radar 0
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: wmi pdev set param 4 value 40
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: WMI vdev create: id 1 type 4 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: mac monitor vdev 1 created
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 2412, mode 1, ch_flags: 0x1, max_
power: 40
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: mac monitor vdev 1 started
ath10k: mac monitor started
ath10k: mac monitor refs: promisc 0 monitor 0 cac 0
ath10k: wmi mgmt vdev down id 0x1
ath10k: wmi vdev stop id 0x1
ath10k: WMI_VDEV_STOPPED_EVENTID
ath10k: mac monitor vdev 1 stopped
ath10k: WMI vdev delete id 1
ath10k: mac monitor vdev 1 deleted
ath10k: mac monitor stopped
ath10k: wmi peer delete vdev_id 0 peer_addr 04:f0:21:0e:38:be
ath10k: mac vdev 0 delete (remove interface)
ath10k: WMI vdev delete id 0
ath10k: mac monitor refs: promisc 0 monitor 0 cac 0
ath10k: boot suspend complete
ath10k: boot hif stop
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000804
ath10k: boot warm reset complete
ath10k: boot hif power down
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
br0: port 2(wlan0) entering disabled state
ath10k: boot hif power up
ath10k: boot warm reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot init ce src ring id 0 entries 16 base_addr d2d61000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2e5a000
ath10k: boot ce dest ring id 2 entries 32 base_addr c0928000
ath10k: boot init ce src ring id 3 entries 32 base_addr d2bbf000
ath10k: boot init ce src ring id 4 entries 4096 base_addr d26e0000
ath10k: boot init ce src ring id 7 entries 2 base_addr d26ef000
ath10k: boot ce dest ring id 7 entries 2 base_addr d26ee000
ath10k: boot waiting target to initialise
ath10k: boot target indicator 0
ath10k: boot target indicator 0
ath10k: boot target indicator 0
ath10k: boot target indicator 2
ath10k: boot target initialised
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: boot upload otp to 0x1234 len 6917
ath10k: bmi fast download address 0x1234 buffer 0xe1ad7034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe1ad7034 length 6916
ath10k: bmi lz data buffer 0xd2b9bd3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi execute result 0x0
ath10k: boot otp execute result 0
ath10k: bmi fast download address 0x1234 buffer 0xe1ad8b44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe1ad8b44 length 190248
ath10k: bmi lz data buffer 0xd2b9bd3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot hif start
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x129e0000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: wmi pdev set param 30 value 1
ath10k: wmi pdev set param 10 value 1
ath10k: wmi pdev set param 1 value 1
ath10k: wmi pdev set param 2 value 1
ath10k: wmi pdev set param 31 value 0
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30 dfs_region 0
ath10k: mac config channel 2412MHz flags 0x1a0 radar 0
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: wmi pdev set param 4 value 40
ath10k: mac vdev create 0 (add interface) type 1 subtype 0
ath10k: WMI vdev create: id 0 type 1 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: vdev param 0 not supported by firmware
ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be
ath10k: wmi pdev set param 13 value 50
ath10k: wmi vdev id 0x0 set param 38 value 3747
ath10k: wmi vdev id 0x0 set param 39 value 3895
ath10k: wmi vdev id 0x0 set param 40 value 3900
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 1
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: WMI vdev create: id 1 type 4 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: mac monitor vdev 1 created
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 2412, mode 1, ch_flags: 0x1, max_
power: 40
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: mac monitor vdev 1 started
ath10k: mac monitor started
------------[ cut here ]------------
WARNING: at /home/alberix2/Desktop/Wilinks_ath10k/ACCESS_POINT_APPLI/Source/Driv
er_ath10k/backports-3.15-rc1-1/net/wireless/nl80211.c:5824 nl80211_start_radar_d
etection+0xf8/0x16c [cfg80211]()
Modules linked in: ath10k_pci(O) ath10k_core(O) ath(O) mac80211(O) cfg80211(O) c
ompat(O) arc4 ubifs ubi [last unloaded: compat]
Backtrace:
[<c0011938>] (dump_backtrace+0x0/0x118) from [<c050205c>] (dump_stack+0x18/0x20)
r6:bf64b61f r5:000016c0 r4:00000000 r3:c10bc7ac
[<c0502044>] (dump_stack+0x0/0x20) from [<c0066c38>] (warn_slowpath_common+0x54/
0x70)
[<c0066be4>] (warn_slowpath_common+0x0/0x70) from [<c0066c78>] (warn_slowpath_nu
ll+0x24/0x2c)
r8:00000000 r7:00000000 r6:d2e88000 r5:d27a8000 r4:d2e883c8
r3:00000009
[<c0066c54>] (warn_slowpath_null+0x0/0x2c) from [<bf60fadc>] (nl80211_start_rada
r_detection+0xf8/0x16c [cfg80211])
[<bf60f9e4>] (nl80211_start_radar_detection+0x0/0x16c [cfg80211]) from [<c045348
8>] (genl_rcv_msg+0x1b4/0x1f4)
[<c04532d4>] (genl_rcv_msg+0x0/0x1f4) from [<c0452904>] (netlink_rcv_skb+0x58/0x
b8)
[<c04528ac>] (netlink_rcv_skb+0x0/0xb8) from [<c04532c4>] (genl_rcv+0x20/0x30)
r6:d318fe00 r5:d29afb00 r4:d29afb00 r3:c04532a4
[<c04532a4>] (genl_rcv+0x0/0x30) from [<c04522d0>] (netlink_unicast+0x224/0x2c4)
r4:d0074400 r3:c04532a4
[<c04520ac>] (netlink_unicast+0x0/0x2c4) from [<c04526a4>] (netlink_sendmsg+0x29
0/0x320)
[<c0452414>] (netlink_sendmsg+0x0/0x320) from [<c0428eac>] (sock_sendmsg+0x98/0x
b4)
[<c0428e14>] (sock_sendmsg+0x0/0xb4) from [<c0429150>] (__sys_sendmsg+0x1d0/0x26
c)
r4:d2b9bf64
[<c0428f80>] (__sys_sendmsg+0x0/0x26c) from [<c042ab30>] (sys_sendmsg+0x44/0x68)
[<c042aaec>] (sys_sendmsg+0x0/0x68) from [<c000ddc0>] (ret_fast_syscall+0x0/0x30
)
r6:00134870 r5:4008f9f0 r4:00136660
---[ end trace 4c6338919fa0b3d6 ]---
ath10k: mac config channel 5260MHz flags 0x10a radar 1
ath10k: mac monitor refs: promisc 1 monitor 0 cac 1
ath10k: mac monitor already started
ath10k: mac cac start monitor vdev 1
ath10k: mac config channel to 5260MHz (cf1 5260MHz cf2 0MHz width 20)
ath10k: wmi mgmt vdev down id 0x1
ath10k: wmi vdev stop id 0x1
ath10k: WMI_VDEV_STOPPED_EVENTID
ath10k: mac monitor vdev 1 stopped
ath10k: mac monitor refs: promisc 1 monitor 0 cac 1
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 5260, mode 4, ch_flags: 0x404, ma
x_power: 40
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x1 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: mac monitor vdev 1 started
ath10k: mac config power 15
ath10k: wmi pdev set param 3 value 30
ath10k: wmi pdev set param 4 value 30
ath10k: wmi event debug mesg len 12
eth0: no IPv6 routers present
br0: no IPv6 routers present
ath10k: mac config channel 5260MHz flags 0x10a radar 0
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: mac monitor will be stopped later
ath10k: mac cac finished
ath10k: mac config channel to 5260MHz (cf1 5260MHz cf2 0MHz width 20 (noht))
ath10k: wmi mgmt vdev down id 0x1
ath10k: wmi vdev stop id 0x1
ath10k: WMI_VDEV_STOPPED_EVENTID
ath10k: mac monitor vdev 1 stopped
ath10k: mac monitor refs: promisc 1 monitor 0 cac 0
ath10k: wmi vdev start id 0x1 flags: 0x0, freq 5260, mode 0, ch_flags: 0x400, ma
x_power: 40
[-- Attachment #3: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-05-16 9:45 UTC|newest]
Thread overview: 134+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 16:18 [PATCH v2 2/2] ath10k: support get/set antenna configurations greearb
2014-05-08 16:18 ` greearb
2014-05-12 15:43 ` RE : " Vu Hai NGUYEN
2014-05-12 16:17 ` Ben Greear
2014-05-13 0:49 ` Avery Pennarun
2014-05-13 3:36 ` Ben Greear
2014-05-13 13:08 ` ath10k: set channel by command "iw" not from hostapd and DFS support of firmware-2.bin_10.1.467.2-1 Vu Hai NGUYEN
2014-05-14 9:32 ` Matti Laakso
2014-05-14 11:56 ` RE : " Vu Hai NGUYEN
2014-05-15 8:02 ` Matti Laakso
2014-05-15 10:41 ` RE : " Vu Hai NGUYEN
2014-05-15 11:11 ` Janusz Dziedzic
2014-05-15 13:36 ` RE : " Vu Hai NGUYEN
2014-05-15 16:08 ` Vu Hai NGUYEN
2014-05-16 6:52 ` Janusz Dziedzic
2014-05-16 7:01 ` RE : " Vu Hai NGUYEN
2014-05-16 7:35 ` Janusz Dziedzic
2014-05-16 7:46 ` Bartosz Markowski
2014-05-16 8:03 ` RE : " Vu Hai NGUYEN
2014-05-16 8:13 ` Bartosz Markowski
2014-05-16 9:41 ` Vu Hai NGUYEN [this message]
2014-05-16 11:39 ` RE : " Janusz Dziedzic
2014-05-16 11:50 ` Janusz Dziedzic
2014-05-16 13:17 ` RE : RE " Vu Hai NGUYEN
2014-05-16 17:40 ` Janusz Dziedzic
2014-05-19 9:39 ` Vu Hai NGUYEN
2014-05-19 10:42 ` Janusz Dziedzic
2014-05-16 13:00 ` RE : RE : RE : RE : " Kalle Valo
2014-05-16 14:03 ` Janusz Dziedzic
2014-05-16 14:12 ` Kalle Valo
2014-05-16 7:41 ` Matti Laakso
2014-05-15 7:07 ` ath10k: firmware crash in station mode Vu Hai NGUYEN
2014-05-15 7:53 ` Janusz Dziedzic
2014-05-15 10:57 ` Michal Kazior
2014-05-15 13:27 ` RE : " Vu Hai NGUYEN
2014-05-19 6:59 ` Michal Kazior
2014-05-19 9:47 ` RE : " Vu Hai NGUYEN
2014-05-19 12:51 ` Michal Kazior
2014-05-20 6:44 ` ath10k: firmware crash in station mode & problem DFS Vu Hai NGUYEN
2014-05-20 8:15 ` RE : " Vu Hai NGUYEN
2014-05-20 17:59 ` Janusz Dziedzic
2014-05-21 9:43 ` RE : " Vu Hai NGUYEN
2014-05-21 14:03 ` Janusz Dziedzic
2014-05-22 7:54 ` RE : " Vu Hai NGUYEN
2014-05-22 8:06 ` Vu Hai NGUYEN
2014-05-22 12:18 ` Janusz Dziedzic
2014-05-22 12:25 ` Janusz Dziedzic
2014-05-22 14:40 ` RE : " Vu Hai NGUYEN
2014-05-22 14:45 ` Vu Hai NGUYEN
2014-05-22 16:44 ` RE : " Kalle Valo
[not found] ` <EE97821C81277E459BEA5C6384C6F241012F109978E8@srvexch01.SODIELEC.local>
[not found] ` <EE97821C81277E459BEA5C6384C6F241012F109978E9@srvexch01.SODIELEC.local>
2014-05-23 7:40 ` Kalle Valo
2014-05-23 7:52 ` RE : " Vu Hai NGUYEN
2014-05-26 8:34 ` Janusz Dziedzic
2014-05-26 13:45 ` Vu Hai NGUYEN
[not found] ` <CAFED-j=i5uhjqaJYL+dm_ui48EFeHG3isHYSSSo=+3gk-Wa5YQ@mail.gmail.com>
2014-05-27 6:50 ` Janusz Dziedzic
2014-05-27 9:21 ` Vu Hai NGUYEN
2014-05-27 16:36 ` Vu Hai NGUYEN
2014-05-28 15:25 ` Vu Hai NGUYEN
2014-05-28 15:49 ` Ben Greear
2014-05-30 9:10 ` Vu Hai NGUYEN
2014-05-30 14:49 ` Ben Greear
2014-06-02 16:16 ` Vu Hai NGUYEN
2014-06-02 16:48 ` Ben Greear
2014-06-03 6:51 ` Vu Hai NGUYEN
2014-06-04 4:14 ` Ben Greear
2014-06-04 9:20 ` Vu Hai NGUYEN
2014-06-04 16:20 ` Ben Greear
2014-06-04 21:40 ` Ben Greear
2014-06-05 8:41 ` RE : " Vu Hai NGUYEN
2014-06-05 15:43 ` Ben Greear
2014-06-05 17:33 ` Ben Greear
2014-06-06 9:05 ` RE : " Vu Hai NGUYEN
2014-06-06 15:50 ` Ben Greear
2014-06-10 7:15 ` Vu Hai NGUYEN
2014-06-10 15:51 ` Ben Greear
2014-06-11 7:19 ` Vu Hai NGUYEN
2014-06-11 17:05 ` Ben Greear
2014-06-12 8:48 ` RE : " Vu Hai NGUYEN
2014-06-12 17:54 ` Ben Greear
2014-06-12 20:22 ` Ben Greear
2014-06-13 8:50 ` Vu Hai NGUYEN
2014-06-13 14:34 ` Ben Greear
2014-06-13 17:04 ` Ben Greear
2014-06-16 7:16 ` Vu Hai NGUYEN
2014-06-16 14:47 ` Ben Greear
2014-06-17 7:25 ` Vu Hai NGUYEN
2014-06-23 9:03 ` Warning message in bridge mode Vu Hai NGUYEN
2014-06-23 21:33 ` Ben Greear
2014-06-23 21:47 ` Bruno Antunes
2014-06-24 7:39 ` RE : " Vu Hai NGUYEN
2014-06-24 15:10 ` Ben Greear
2014-06-26 14:17 ` Vu Hai NGUYEN
2014-06-26 14:34 ` Ben Greear
2014-06-27 15:52 ` Vu Hai NGUYEN
2014-06-27 15:59 ` Ben Greear
2014-06-30 8:14 ` Vu Hai NGUYEN
2014-06-07 0:28 ` RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS Ben Greear
2014-05-28 17:19 ` Janusz Dziedzic
2014-05-28 18:40 ` Janusz Dziedzic
2014-05-30 11:55 ` Vu Hai NGUYEN
2014-06-02 7:03 ` Janusz Dziedzic
2014-05-23 7:18 ` Michal Kazior
2014-05-23 9:15 ` RE : RE : ath10k: firmware crash in station mode Yeoh Chun-Yeow
2014-05-23 11:35 ` RE : " Vu Hai NGUYEN
2014-05-23 14:27 ` Yeoh Chun-Yeow
2014-05-23 14:55 ` TR " Vu Hai NGUYEN
2014-05-23 15:36 ` Yeoh Chun-Yeow
2014-05-23 16:03 ` Ben Greear
2014-05-24 6:29 ` Tim Harvey
2014-05-24 16:14 ` Ben Greear
2014-05-27 19:13 ` Ben Greear
2014-05-25 7:26 ` Kalle Valo
2014-05-24 5:49 ` Tim Harvey
2014-05-24 16:46 ` Yeoh Chun-Yeow
2014-05-13 0:52 ` [PATCH] ath10k: support get/set antenna configurations Avery Pennarun
2014-05-13 18:10 ` Kalle Valo
2014-05-13 18:15 ` Ben Greear
2014-05-13 21:03 ` Avery Pennarun
2014-05-14 12:28 ` Kalle Valo
2014-05-15 4:04 ` Yeoh Chun-Yeow
2014-05-15 5:47 ` Avery Pennarun
2014-05-15 6:51 ` Yeoh Chun-Yeow
2014-05-15 7:11 ` Kalle Valo
2014-05-13 21:11 ` [PATCH v3] " Avery Pennarun
2014-05-14 6:20 ` Yeoh Chun-Yeow
2014-05-14 6:21 ` Avery Pennarun
2014-05-14 6:25 ` Yeoh Chun-Yeow
2014-05-14 7:18 ` Avery Pennarun
2014-05-14 7:22 ` Yeoh Chun-Yeow
2014-05-14 7:33 ` Yeoh Chun-Yeow
2014-05-16 12:30 ` Kalle Valo
2014-05-16 13:00 ` Ben Greear
2014-05-22 16:56 ` Kalle Valo
2014-05-13 17:50 ` RE : [PATCH v2 2/2] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=EE97821C81277E459BEA5C6384C6F241012F109978D7@srvexch01.SODIELEC.local \
--to=vh.nguyen@actiasodielec.fr \
--cc=ath10k@lists.infradead.org \
--cc=bartosz.markowski@tieto.com \
--cc=p.carneiro@actiasodielec.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.