From: Vu Hai NGUYEN <vh.nguyen@actiasodielec.fr>
To: Ben Greear <greearb@candelatech.com>
Cc: Janusz Dziedzic <janusz.dziedzic@tieto.com>,
Patrick CARNEIRO RODRIGUEZ <p.carneiro@actiasodielec.fr>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>,
Janusz Dziedzic <janusz.dziedzic@gmail.com>
Subject: RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS
Date: Wed, 11 Jun 2014 09:19:01 +0200 [thread overview]
Message-ID: <EE97821C81277E459BEA5C6384C6F241012F10997906@srvexch01.SODIELEC.local> (raw)
In-Reply-To: <53972984.8020303@candelatech.com>
>Can you explain how you test this? Do I need a special AP configuration
>to do the test, or is a normal ath10k NIC and hostapd enough?
>
>I can try to reproduce the problem and test the fixes here.
In my code, I copy the firmware chosen (10.1, 999 or CT) from another folder to /lib/firmware/ath10k/...
before loading the modules of ath10k. Then I set up network (bridge or router) and finally run hostapd (if AP)
and wpa_supplicant (if STA). Each time I change a parameter of my network the program will kill almost
all the actual processus, unload the modules and then reload, run new processus ....
Btw, I think that there is a conflict in your hostapd config file. I saw that you use channel 52 and
vht_oper_centr_freq_seg0_idx=54, it means that you use 40 MHz operating Channel width?
If so vht_oper_chwidth=1 should be set to 0. If you want to use 80Mhz Channel width you should
set vht_oper_centr_freq_seg0_idx=58.
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-06-11 7:23 UTC|newest]
Thread overview: 134+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 16:18 [PATCH v2 2/2] ath10k: support get/set antenna configurations greearb
2014-05-08 16:18 ` greearb
2014-05-12 15:43 ` RE : " Vu Hai NGUYEN
2014-05-12 16:17 ` Ben Greear
2014-05-13 0:49 ` Avery Pennarun
2014-05-13 3:36 ` Ben Greear
2014-05-13 13:08 ` ath10k: set channel by command "iw" not from hostapd and DFS support of firmware-2.bin_10.1.467.2-1 Vu Hai NGUYEN
2014-05-14 9:32 ` Matti Laakso
2014-05-14 11:56 ` RE : " Vu Hai NGUYEN
2014-05-15 8:02 ` Matti Laakso
2014-05-15 10:41 ` RE : " Vu Hai NGUYEN
2014-05-15 11:11 ` Janusz Dziedzic
2014-05-15 13:36 ` RE : " Vu Hai NGUYEN
2014-05-15 16:08 ` Vu Hai NGUYEN
2014-05-16 6:52 ` Janusz Dziedzic
2014-05-16 7:01 ` RE : " Vu Hai NGUYEN
2014-05-16 7:35 ` Janusz Dziedzic
2014-05-16 7:46 ` Bartosz Markowski
2014-05-16 8:03 ` RE : " Vu Hai NGUYEN
2014-05-16 8:13 ` Bartosz Markowski
2014-05-16 9:41 ` RE : " Vu Hai NGUYEN
2014-05-16 11:39 ` Janusz Dziedzic
2014-05-16 11:50 ` Janusz Dziedzic
2014-05-16 13:17 ` RE : RE " Vu Hai NGUYEN
2014-05-16 17:40 ` Janusz Dziedzic
2014-05-19 9:39 ` Vu Hai NGUYEN
2014-05-19 10:42 ` Janusz Dziedzic
2014-05-16 13:00 ` RE : RE : RE : RE : " Kalle Valo
2014-05-16 14:03 ` Janusz Dziedzic
2014-05-16 14:12 ` Kalle Valo
2014-05-16 7:41 ` Matti Laakso
2014-05-15 7:07 ` ath10k: firmware crash in station mode Vu Hai NGUYEN
2014-05-15 7:53 ` Janusz Dziedzic
2014-05-15 10:57 ` Michal Kazior
2014-05-15 13:27 ` RE : " Vu Hai NGUYEN
2014-05-19 6:59 ` Michal Kazior
2014-05-19 9:47 ` RE : " Vu Hai NGUYEN
2014-05-19 12:51 ` Michal Kazior
2014-05-20 6:44 ` ath10k: firmware crash in station mode & problem DFS Vu Hai NGUYEN
2014-05-20 8:15 ` RE : " Vu Hai NGUYEN
2014-05-20 17:59 ` Janusz Dziedzic
2014-05-21 9:43 ` RE : " Vu Hai NGUYEN
2014-05-21 14:03 ` Janusz Dziedzic
2014-05-22 7:54 ` RE : " Vu Hai NGUYEN
2014-05-22 8:06 ` Vu Hai NGUYEN
2014-05-22 12:18 ` Janusz Dziedzic
2014-05-22 12:25 ` Janusz Dziedzic
2014-05-22 14:40 ` RE : " Vu Hai NGUYEN
2014-05-22 14:45 ` Vu Hai NGUYEN
2014-05-22 16:44 ` RE : " Kalle Valo
[not found] ` <EE97821C81277E459BEA5C6384C6F241012F109978E8@srvexch01.SODIELEC.local>
[not found] ` <EE97821C81277E459BEA5C6384C6F241012F109978E9@srvexch01.SODIELEC.local>
2014-05-23 7:40 ` Kalle Valo
2014-05-23 7:52 ` RE : " Vu Hai NGUYEN
2014-05-26 8:34 ` Janusz Dziedzic
2014-05-26 13:45 ` Vu Hai NGUYEN
[not found] ` <CAFED-j=i5uhjqaJYL+dm_ui48EFeHG3isHYSSSo=+3gk-Wa5YQ@mail.gmail.com>
2014-05-27 6:50 ` Janusz Dziedzic
2014-05-27 9:21 ` Vu Hai NGUYEN
2014-05-27 16:36 ` Vu Hai NGUYEN
2014-05-28 15:25 ` Vu Hai NGUYEN
2014-05-28 15:49 ` Ben Greear
2014-05-30 9:10 ` Vu Hai NGUYEN
2014-05-30 14:49 ` Ben Greear
2014-06-02 16:16 ` Vu Hai NGUYEN
2014-06-02 16:48 ` Ben Greear
2014-06-03 6:51 ` Vu Hai NGUYEN
2014-06-04 4:14 ` Ben Greear
2014-06-04 9:20 ` Vu Hai NGUYEN
2014-06-04 16:20 ` Ben Greear
2014-06-04 21:40 ` Ben Greear
2014-06-05 8:41 ` RE : " Vu Hai NGUYEN
2014-06-05 15:43 ` Ben Greear
2014-06-05 17:33 ` Ben Greear
2014-06-06 9:05 ` RE : " Vu Hai NGUYEN
2014-06-06 15:50 ` Ben Greear
2014-06-10 7:15 ` Vu Hai NGUYEN
2014-06-10 15:51 ` Ben Greear
2014-06-11 7:19 ` Vu Hai NGUYEN [this message]
2014-06-11 17:05 ` Ben Greear
2014-06-12 8:48 ` RE : " Vu Hai NGUYEN
2014-06-12 17:54 ` Ben Greear
2014-06-12 20:22 ` Ben Greear
2014-06-13 8:50 ` Vu Hai NGUYEN
2014-06-13 14:34 ` Ben Greear
2014-06-13 17:04 ` Ben Greear
2014-06-16 7:16 ` Vu Hai NGUYEN
2014-06-16 14:47 ` Ben Greear
2014-06-17 7:25 ` Vu Hai NGUYEN
2014-06-23 9:03 ` Warning message in bridge mode Vu Hai NGUYEN
2014-06-23 21:33 ` Ben Greear
2014-06-23 21:47 ` Bruno Antunes
2014-06-24 7:39 ` RE : " Vu Hai NGUYEN
2014-06-24 15:10 ` Ben Greear
2014-06-26 14:17 ` Vu Hai NGUYEN
2014-06-26 14:34 ` Ben Greear
2014-06-27 15:52 ` Vu Hai NGUYEN
2014-06-27 15:59 ` Ben Greear
2014-06-30 8:14 ` Vu Hai NGUYEN
2014-06-07 0:28 ` RE : RE : RE : RE : RE : ath10k: firmware crash in station mode & problem DFS Ben Greear
2014-05-28 17:19 ` Janusz Dziedzic
2014-05-28 18:40 ` Janusz Dziedzic
2014-05-30 11:55 ` Vu Hai NGUYEN
2014-06-02 7:03 ` Janusz Dziedzic
2014-05-23 7:18 ` Michal Kazior
2014-05-23 9:15 ` RE : RE : ath10k: firmware crash in station mode Yeoh Chun-Yeow
2014-05-23 11:35 ` RE : " Vu Hai NGUYEN
2014-05-23 14:27 ` Yeoh Chun-Yeow
2014-05-23 14:55 ` TR " Vu Hai NGUYEN
2014-05-23 15:36 ` Yeoh Chun-Yeow
2014-05-23 16:03 ` Ben Greear
2014-05-24 6:29 ` Tim Harvey
2014-05-24 16:14 ` Ben Greear
2014-05-27 19:13 ` Ben Greear
2014-05-25 7:26 ` Kalle Valo
2014-05-24 5:49 ` Tim Harvey
2014-05-24 16:46 ` Yeoh Chun-Yeow
2014-05-13 0:52 ` [PATCH] ath10k: support get/set antenna configurations Avery Pennarun
2014-05-13 18:10 ` Kalle Valo
2014-05-13 18:15 ` Ben Greear
2014-05-13 21:03 ` Avery Pennarun
2014-05-14 12:28 ` Kalle Valo
2014-05-15 4:04 ` Yeoh Chun-Yeow
2014-05-15 5:47 ` Avery Pennarun
2014-05-15 6:51 ` Yeoh Chun-Yeow
2014-05-15 7:11 ` Kalle Valo
2014-05-13 21:11 ` [PATCH v3] " Avery Pennarun
2014-05-14 6:20 ` Yeoh Chun-Yeow
2014-05-14 6:21 ` Avery Pennarun
2014-05-14 6:25 ` Yeoh Chun-Yeow
2014-05-14 7:18 ` Avery Pennarun
2014-05-14 7:22 ` Yeoh Chun-Yeow
2014-05-14 7:33 ` Yeoh Chun-Yeow
2014-05-16 12:30 ` Kalle Valo
2014-05-16 13:00 ` Ben Greear
2014-05-22 16:56 ` Kalle Valo
2014-05-13 17:50 ` RE : [PATCH v2 2/2] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=EE97821C81277E459BEA5C6384C6F241012F10997906@srvexch01.SODIELEC.local \
--to=vh.nguyen@actiasodielec.fr \
--cc=ath10k@lists.infradead.org \
--cc=greearb@candelatech.com \
--cc=janusz.dziedzic@gmail.com \
--cc=janusz.dziedzic@tieto.com \
--cc=p.carneiro@actiasodielec.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.