* hostapd_free_hapd_data: Interface wlan0 wasn't started #dunfell #linux #kernel
@ 2020-12-01 8:09 vijayrakeshmunganda
2020-12-03 7:02 ` vijayrakeshmunganda
0 siblings, 1 reply; 5+ messages in thread
From: vijayrakeshmunganda @ 2020-12-01 8:09 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 690 bytes --]
Hi,
I'm new to Yocto Project/Embedded Linux. I had added hostapd recipe (https://layers.openembedded.org/layerindex/recipe/28409/) into my build image, and when I try to run "hostapd hostapd.conf" in terminal, I get the below error.
Configuration file: hostapd.conf
nl80211: Could not configure driver mode
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
nl80211 driver initialization failed.
wlan0: interface state UNINITIALIZED->DISABLED
wlan0: AP-DISABLED
wlan0: CTRL-EVENT-TERMINATING
hostapd_free_hapd_data: Interface wlan0 wasn't started
I had also killed wpa_supplicant, but still I get same error. Kindly please help me with this issue.
Thanks & Regards,
VR.
[-- Attachment #2: Type: text/html, Size: 830 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: hostapd_free_hapd_data: Interface wlan0 wasn't started #dunfell #linux #kernel
2020-12-01 8:09 hostapd_free_hapd_data: Interface wlan0 wasn't started #dunfell #linux #kernel vijayrakeshmunganda
@ 2020-12-03 7:02 ` vijayrakeshmunganda
2020-12-04 18:21 ` [yocto] " Randy MacLeod
0 siblings, 1 reply; 5+ messages in thread
From: vijayrakeshmunganda @ 2020-12-03 7:02 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 77 bytes --]
Hi All,
Can anyone please help me this issue.
Thanks & Regards,
VR
[-- Attachment #2: Type: text/html, Size: 105 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [yocto] hostapd_free_hapd_data: Interface wlan0 wasn't started #dunfell #linux #kernel
2020-12-03 7:02 ` vijayrakeshmunganda
@ 2020-12-04 18:21 ` Randy MacLeod
2020-12-05 14:59 ` vijayrakeshmunganda
0 siblings, 1 reply; 5+ messages in thread
From: Randy MacLeod @ 2020-12-04 18:21 UTC (permalink / raw)
To: vijayrakeshmunganda, yocto
On 2020-12-03 2:02 a.m., vijayrakeshmunganda@gmail.com wrote:
> Hi All,
>
> Can anyone please help me this issue.
Hi VR,
What version/release of yocto (oe-core, bitbake, ...) are you using?
What image are you building and what did you add to your local.conf ?
What is your target system and who provided the BSP?
If it's an open source bsp layer or you can reproduce the issue using
a layer such as meta-intel or meta-raspberrypi then someone
might be able to help. Otherwise you'll have to contact the BSP vendor.
If you can reproduce the issue with poky, and no one on the list
helps out, then you could open a defect in the YP Bugzilla.
https://wiki.yoctoproject.org/wiki/Bug_reporting_and_Information_levels
Good luck,
../Randy
>
> Thanks & Regards,
> VR
>
>
>
>
--
# Randy MacLeod
# Wind River Linux
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-12-21 12:35 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-01 8:09 hostapd_free_hapd_data: Interface wlan0 wasn't started #dunfell #linux #kernel vijayrakeshmunganda
2020-12-03 7:02 ` vijayrakeshmunganda
2020-12-04 18:21 ` [yocto] " Randy MacLeod
2020-12-05 14:59 ` vijayrakeshmunganda
2020-12-21 12:35 ` Shamil Khan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.