* [PATCH 0/3] add support for Marvell's Dove SoC
@ 2009-11-24 17:33 Saeed Bishara
2009-11-24 17:33 ` [PATCH 1/3] ARM: add base support for Marvell " Saeed Bishara
0 siblings, 1 reply; 20+ messages in thread
From: Saeed Bishara @ 2009-11-24 17:33 UTC (permalink / raw)
To: linux-arm-kernel
This patch series adds support for the Marvell's Dove SoC (88AP510).
The following interfaces/features are enabled by this series:
CPU in ARMv6 mode
L2 Cache
Uart
Giga Ethernet
SPI
RTC
XOR dma engines
PCIE
USB
SATA
I2C
GPIO
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-24 17:33 [PATCH 0/3] add support for Marvell's Dove SoC Saeed Bishara
@ 2009-11-24 17:33 ` Saeed Bishara
2009-11-24 17:33 ` [PATCH 2/3] Add Tauros2 L2 cache controller support Saeed Bishara
` (3 more replies)
0 siblings, 4 replies; 20+ messages in thread
From: Saeed Bishara @ 2009-11-24 17:33 UTC (permalink / raw)
To: linux-arm-kernel
The Marvell Dove (88AP510) is a high-performance, highly integrated,
low power SoC with high-end ARM-compatible processor (known as PJ4),
graphics processing unit, high-definition video decoding acceleration
hardware, and a broad range of peripherals.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
---
arch/arm/Kconfig | 13 +
arch/arm/Makefile | 1 +
arch/arm/boot/compressed/head.S | 6 +
arch/arm/configs/dove_defconfig | 1617 +++++++++++++++++++++++++
arch/arm/mach-dove/Kconfig | 14 +
arch/arm/mach-dove/Makefile | 3 +
arch/arm/mach-dove/Makefile.boot | 3 +
arch/arm/mach-dove/addr-map.c | 149 +++
arch/arm/mach-dove/common.c | 777 ++++++++++++
arch/arm/mach-dove/common.h | 40 +
arch/arm/mach-dove/dove-db-setup.c | 102 ++
arch/arm/mach-dove/include/mach/bridge-regs.h | 58 +
arch/arm/mach-dove/include/mach/debug-macro.S | 20 +
arch/arm/mach-dove/include/mach/dove.h | 180 +++
arch/arm/mach-dove/include/mach/entry-macro.S | 39 +
arch/arm/mach-dove/include/mach/gpio.h | 49 +
arch/arm/mach-dove/include/mach/hardware.h | 26 +
arch/arm/mach-dove/include/mach/io.h | 20 +
arch/arm/mach-dove/include/mach/irqs.h | 101 ++
arch/arm/mach-dove/include/mach/memory.h | 10 +
arch/arm/mach-dove/include/mach/pm.h | 54 +
arch/arm/mach-dove/include/mach/system.h | 36 +
arch/arm/mach-dove/include/mach/timex.h | 9 +
arch/arm/mach-dove/include/mach/uncompress.h | 37 +
arch/arm/mach-dove/include/mach/vmalloc.h | 6 +
arch/arm/mach-dove/irq.c | 133 ++
arch/arm/mach-dove/pcie.c | 238 ++++
arch/arm/mm/Kconfig | 2 +-
arch/arm/mm/proc-v6.S | 33 +-
29 files changed, 3774 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/configs/dove_defconfig
create mode 100644 arch/arm/mach-dove/Kconfig
create mode 100644 arch/arm/mach-dove/Makefile
create mode 100644 arch/arm/mach-dove/Makefile.boot
create mode 100644 arch/arm/mach-dove/addr-map.c
create mode 100644 arch/arm/mach-dove/common.c
create mode 100644 arch/arm/mach-dove/common.h
create mode 100644 arch/arm/mach-dove/dove-db-setup.c
create mode 100644 arch/arm/mach-dove/include/mach/bridge-regs.h
create mode 100644 arch/arm/mach-dove/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-dove/include/mach/dove.h
create mode 100644 arch/arm/mach-dove/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-dove/include/mach/gpio.h
create mode 100644 arch/arm/mach-dove/include/mach/hardware.h
create mode 100644 arch/arm/mach-dove/include/mach/io.h
create mode 100644 arch/arm/mach-dove/include/mach/irqs.h
create mode 100644 arch/arm/mach-dove/include/mach/memory.h
create mode 100644 arch/arm/mach-dove/include/mach/pm.h
create mode 100644 arch/arm/mach-dove/include/mach/system.h
create mode 100644 arch/arm/mach-dove/include/mach/timex.h
create mode 100644 arch/arm/mach-dove/include/mach/uncompress.h
create mode 100644 arch/arm/mach-dove/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-dove/irq.c
create mode 100644 arch/arm/mach-dove/pcie.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c..7fae1ef 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -433,6 +433,17 @@ config ARCH_L7200
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_DOVE
+ bool "Marvell Dove"
+ select PCI
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the Marvell Dove SoC 88AP510
+
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
select CPU_FEROCEON
@@ -747,6 +758,8 @@ source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-dove/Kconfig"
+
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf..2ddc323 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_DAVINCI) := davinci
+machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fa6fbf4..d356af7 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -743,6 +743,12 @@ proc_types:
W(b) __armv4_mmu_cache_off
W(b) __armv6_mmu_cache_flush
+ .word 0x560f5810 @ Marvell PJ4 ARMv6
+ .word 0xff0ffff0
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv6_mmu_cache_flush
+
.word 0x000f0000 @ new CPU Id
.word 0x000f0000
W(b) __armv7_mmu_cache_on
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
new file mode 100644
index 0000000..f2d1ea0
--- /dev/null
+++ b/arch/arm/configs/dove_defconfig
@@ -0,0 +1,1617 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Tue Nov 24 13:48:39 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_DOVE=y
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Marvell Dove Implementations
+#
+CONFIG_MACH_DOVE_DB=y
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
new file mode 100644
index 0000000..3b9a32a
--- /dev/null
+++ b/arch/arm/mach-dove/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_DOVE
+
+menu "Marvell Dove Implementations"
+
+config MACH_DOVE_DB
+ bool "Marvell DB-MV88AP510 Development Board"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DB-MV88AP510 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
new file mode 100644
index 0000000..7ab3be5
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile
@@ -0,0 +1,3 @@
+obj-y += common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
new file mode 100644
index 0000000..67039c3
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
new file mode 100644
index 0000000..34187bd
--- /dev/null
+++ b/arch/arm/mach-dove/addr-map.c
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-dove/addr-map.c
+ *
+ * Address map functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/mach/arch.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0x0
+#define TARGET_BOOTROM 0x1
+#define TARGET_CESA 0x3
+#define TARGET_PCIE0 0x4
+#define TARGET_PCIE1 0x8
+#define TARGET_SCRATCHPAD 0xd
+
+#define ATTR_CESA 0x01
+#define ATTR_BOOTROM 0xfd
+#define ATTR_DEV_SPI0_ROM 0xfe
+#define ATTR_DEV_SPI1_ROM 0xfb
+#define ATTR_PCIE_IO 0xe0
+#define ATTR_PCIE_MEM 0xe8
+#define ATTR_SCRATCHPAD 0x0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
+#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
+#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
+#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
+
+struct mbus_dram_target_info dove_mbus_dram_info;
+
+static inline void __iomem *ddr_map_sc(int i)
+{
+ return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
+}
+
+static int cpu_win_can_remap(int win)
+{
+ if (win < 4)
+ return 1;
+
+ return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+ u8 target, u8 attr, int remap)
+{
+ u32 ctrl;
+
+ base &= 0xffff0000;
+ ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+ writel(base, WIN_BASE(win));
+ writel(ctrl, WIN_CTRL(win));
+ if (cpu_win_can_remap(win)) {
+ if (remap < 0)
+ remap = base;
+ writel(remap & 0xffff0000, WIN_REMAP_LO(win));
+ writel(0, WIN_REMAP_HI(win));
+ }
+}
+
+void __init dove_setup_cpu_mbus(void)
+{
+ int i;
+ int cs;
+
+ /*
+ * First, disable and clear windows.
+ */
+ for (i = 0; i < 8; i++) {
+ writel(0, WIN_BASE(i));
+ writel(0, WIN_CTRL(i));
+ if (cpu_win_can_remap(i)) {
+ writel(0, WIN_REMAP_LO(i));
+ writel(0, WIN_REMAP_HI(i));
+ }
+ }
+
+ /*
+ * Setup windows for PCIe IO+MEM space.
+ */
+ setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
+ setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
+ setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+ setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+ /*
+ * Setup window for CESA engine.
+ */
+ setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+ TARGET_CESA, ATTR_CESA, -1);
+
+ /*
+ * Setup the Window to the BootROM for Standby and Sleep Resume
+ */
+ setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+ TARGET_BOOTROM, ATTR_BOOTROM, -1);
+
+ /*
+ * Setup the Window to the PMU Scratch Pad space
+ */
+ setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+ TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 2; i++) {
+ u32 map = readl(ddr_map_sc(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (map & 1) {
+ struct mbus_dram_window *w;
+
+ w = &dove_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0; /* CS address decoding done inside */
+ /* the DDR controller, no need to */
+ /* provide attributes */
+ w->base = map & 0xff800000;
+ w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+ }
+ }
+ dove_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
new file mode 100644
index 0000000..a9248ce
--- /dev/null
+++ b/arch/arm/mach-dove/common.c
@@ -0,0 +1,777 @@
+/*
+ * arch/arm/mach-dove/common.c
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/pci.h>
+#include <mach/dove.h>
+#include <mach/bridge-regs.h>
+#include <asm/mach/arch.h>
+#include <mach/gpio.h>
+#include <linux/irq.h>
+#include <plat/mv_xor.h>
+#include <plat/ehci-orion.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc dove_io_desc[] __initdata = {
+ {
+ .virtual = DOVE_SB_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
+ .length = DOVE_SB_REGS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_NB_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
+ .length = DOVE_NB_REGS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_PCIE0_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
+ .length = DOVE_PCIE0_IO_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_PCIE1_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
+ .length = DOVE_PCIE1_IO_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init dove_map_io(void)
+{
+ iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data dove_ehci_data = {
+ .dram = &dove_mbus_dram_info,
+ .phy_version = EHCI_PHY_NA,
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource dove_ehci0_resources[] = {
+ {
+ .start = DOVE_USB0_PHYS_BASE,
+ .end = DOVE_USB0_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_USB0,
+ .end = IRQ_DOVE_USB0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ehci0 = {
+ .name = "orion-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dove_ehci_data,
+ },
+ .resource = dove_ehci0_resources,
+ .num_resources = ARRAY_SIZE(dove_ehci0_resources),
+};
+
+void __init dove_ehci0_init(void)
+{
+ platform_device_register(&dove_ehci0);
+}
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource dove_ehci1_resources[] = {
+ {
+ .start = DOVE_USB1_PHYS_BASE,
+ .end = DOVE_USB1_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_USB1,
+ .end = IRQ_DOVE_USB1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ehci1 = {
+ .name = "orion-ehci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dove_ehci_data,
+ },
+ .resource = dove_ehci1_resources,
+ .num_resources = ARRAY_SIZE(dove_ehci1_resources),
+};
+
+void __init dove_ehci1_init(void)
+{
+ platform_device_register(&dove_ehci1);
+}
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
+ .t_clk = 0,
+ .dram = &dove_mbus_dram_info,
+};
+
+static struct resource dove_ge00_shared_resources[] = {
+ {
+ .name = "ge00 base",
+ .start = DOVE_GE00_PHYS_BASE + 0x2000,
+ .end = DOVE_GE00_PHYS_BASE + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_ge00_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &dove_ge00_shared_data,
+ },
+ .num_resources = 1,
+ .resource = dove_ge00_shared_resources,
+};
+
+static struct resource dove_ge00_resources[] = {
+ {
+ .name = "ge00 irq",
+ .start = IRQ_DOVE_GE00_SUM,
+ .end = IRQ_DOVE_GE00_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ge00 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = dove_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &dove_ge00_shared;
+ dove_ge00.dev.platform_data = eth_data;
+
+ platform_device_register(&dove_ge00_shared);
+ platform_device_register(&dove_ge00);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource dove_rtc_resource[] = {
+ {
+ .start = DOVE_RTC_PHYS_BASE,
+ .end = DOVE_RTC_PHYS_BASE + 32 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_RTC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+void __init dove_rtc_init(void)
+{
+ platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource dove_sata_resources[] = {
+ {
+ .name = "sata base",
+ .start = DOVE_SATA_PHYS_BASE,
+ .end = DOVE_SATA_PHYS_BASE + 0x5000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sata irq",
+ .start = IRQ_DOVE_SATA,
+ .end = IRQ_DOVE_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_sata = {
+ .name = "sata_mv",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(dove_sata_resources),
+ .resource = dove_sata_resources,
+};
+
+void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
+{
+ sata_data->dram = &dove_mbus_dram_info;
+ dove_sata.dev.platform_data = sata_data;
+ platform_device_register(&dove_sata);
+}
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart0_data[] = {
+ {
+ .mapbase = DOVE_UART0_PHYS_BASE,
+ .membase = (char *)DOVE_UART0_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart0_resources[] = {
+ {
+ .start = DOVE_UART0_PHYS_BASE,
+ .end = DOVE_UART0_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_0,
+ .end = IRQ_DOVE_UART_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart0 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = dove_uart0_data,
+ },
+ .resource = dove_uart0_resources,
+ .num_resources = ARRAY_SIZE(dove_uart0_resources),
+};
+
+void __init dove_uart0_init(void)
+{
+ platform_device_register(&dove_uart0);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart1_data[] = {
+ {
+ .mapbase = DOVE_UART1_PHYS_BASE,
+ .membase = (char *)DOVE_UART1_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart1_resources[] = {
+ {
+ .start = DOVE_UART1_PHYS_BASE,
+ .end = DOVE_UART1_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_1,
+ .end = IRQ_DOVE_UART_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart1 = {
+ .name = "serial8250",
+ .id = 1,
+ .dev = {
+ .platform_data = dove_uart1_data,
+ },
+ .resource = dove_uart1_resources,
+ .num_resources = ARRAY_SIZE(dove_uart1_resources),
+};
+
+void __init dove_uart1_init(void)
+{
+ platform_device_register(&dove_uart1);
+}
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart2_data[] = {
+ {
+ .mapbase = DOVE_UART2_PHYS_BASE,
+ .membase = (char *)DOVE_UART2_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_2,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart2_resources[] = {
+ {
+ .start = DOVE_UART2_PHYS_BASE,
+ .end = DOVE_UART2_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_2,
+ .end = IRQ_DOVE_UART_2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart2 = {
+ .name = "serial8250",
+ .id = 2,
+ .dev = {
+ .platform_data = dove_uart2_data,
+ },
+ .resource = dove_uart2_resources,
+ .num_resources = ARRAY_SIZE(dove_uart2_resources),
+};
+
+void __init dove_uart2_init(void)
+{
+ platform_device_register(&dove_uart2);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart3_data[] = {
+ {
+ .mapbase = DOVE_UART3_PHYS_BASE,
+ .membase = (char *)DOVE_UART3_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_3,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart3_resources[] = {
+ {
+ .start = DOVE_UART3_PHYS_BASE,
+ .end = DOVE_UART3_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_3,
+ .end = IRQ_DOVE_UART_3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart3 = {
+ .name = "serial8250",
+ .id = 3,
+ .dev = {
+ .platform_data = dove_uart3_data,
+ },
+ .resource = dove_uart3_resources,
+ .num_resources = ARRAY_SIZE(dove_uart3_resources),
+};
+
+void __init dove_uart3_init(void)
+{
+ platform_device_register(&dove_uart3);
+}
+
+/*****************************************************************************
+ * SPI0
+ ****************************************************************************/
+static struct orion_spi_info dove_spi0_data = {
+ .tclk = 0,
+};
+
+static struct resource dove_spi0_resources[] = {
+ {
+ .start = DOVE_SPI0_PHYS_BASE,
+ .end = DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_SPI0,
+ .end = IRQ_DOVE_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_spi0 = {
+ .name = "orion_spi",
+ .id = 0,
+ .resource = dove_spi0_resources,
+ .dev = {
+ .platform_data = &dove_spi0_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_spi0_resources),
+};
+
+void __init dove_spi0_init(void)
+{
+ platform_device_register(&dove_spi0);
+}
+
+/*****************************************************************************
+ * SPI1
+ ****************************************************************************/
+static struct orion_spi_info dove_spi1_data = {
+ .tclk = 0,
+};
+
+static struct resource dove_spi1_resources[] = {
+ {
+ .start = DOVE_SPI1_PHYS_BASE,
+ .end = DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_SPI1,
+ .end = IRQ_DOVE_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_spi1 = {
+ .name = "orion_spi",
+ .id = 1,
+ .resource = dove_spi1_resources,
+ .dev = {
+ .platform_data = &dove_spi1_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_spi1_resources),
+};
+
+void __init dove_spi1_init(void)
+{
+ platform_device_register(&dove_spi1);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata dove_i2c_data = {
+ .freq_m = 10, /* assumes 166 MHz TCLK gets 94.3kHz */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource dove_i2c_resources[] = {
+ {
+ .name = "i2c base",
+ .start = DOVE_I2C_PHYS_BASE,
+ .end = DOVE_I2C_PHYS_BASE + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c irq",
+ .start = IRQ_DOVE_I2C,
+ .end = IRQ_DOVE_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_i2c = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dove_i2c_resources),
+ .resource = dove_i2c_resources,
+ .dev = {
+ .platform_data = &dove_i2c_data,
+ },
+};
+
+void __init dove_i2c_init(void)
+{
+ platform_device_register(&dove_i2c);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static int get_tclk(void)
+{
+ /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
+ return 166666667;
+}
+
+static void dove_timer_init(void)
+{
+ orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+}
+
+struct sys_timer dove_timer = {
+ .init = dove_timer_init,
+};
+
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data dove_xor_shared_data = {
+ .dram = &dove_mbus_dram_info,
+};
+
+/*****************************************************************************
+ * XOR 0
+ ****************************************************************************/
+static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor0_shared_resources[] = {
+ {
+ .name = "xor 0 low",
+ .start = DOVE_XOR0_PHYS_BASE,
+ .end = DOVE_XOR0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 0 high",
+ .start = DOVE_XOR0_HIGH_PHYS_BASE,
+ .end = DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_xor0_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &dove_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_xor0_shared_resources),
+ .resource = dove_xor0_shared_resources,
+};
+
+static struct resource dove_xor00_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_00,
+ .end = IRQ_DOVE_XOR_00,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor00_data = {
+ .shared = &dove_xor0_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor00_channel = {
+ .name = MV_XOR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dove_xor00_resources),
+ .resource = dove_xor00_resources,
+ .dev = {
+ .dma_mask = &dove_xor0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor00_data,
+ },
+};
+
+static struct resource dove_xor01_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_01,
+ .end = IRQ_DOVE_XOR_01,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor01_data = {
+ .shared = &dove_xor0_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor01_channel = {
+ .name = MV_XOR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(dove_xor01_resources),
+ .resource = dove_xor01_resources,
+ .dev = {
+ .dma_mask = &dove_xor0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor01_data,
+ },
+};
+
+void __init dove_xor0_init(void)
+{
+ platform_device_register(&dove_xor0_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
+ platform_device_register(&dove_xor00_channel);
+
+ dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
+ platform_device_register(&dove_xor01_channel);
+}
+
+/*****************************************************************************
+ * XOR 1
+ ****************************************************************************/
+static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor1_shared_resources[] = {
+ {
+ .name = "xor 0 low",
+ .start = DOVE_XOR1_PHYS_BASE,
+ .end = DOVE_XOR1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 0 high",
+ .start = DOVE_XOR1_HIGH_PHYS_BASE,
+ .end = DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_xor1_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 1,
+ .dev = {
+ .platform_data = &dove_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_xor1_shared_resources),
+ .resource = dove_xor1_shared_resources,
+};
+
+static struct resource dove_xor10_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_10,
+ .end = IRQ_DOVE_XOR_10,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor10_data = {
+ .shared = &dove_xor1_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor10_channel = {
+ .name = MV_XOR_NAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(dove_xor10_resources),
+ .resource = dove_xor10_resources,
+ .dev = {
+ .dma_mask = &dove_xor1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor10_data,
+ },
+};
+
+static struct resource dove_xor11_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_11,
+ .end = IRQ_DOVE_XOR_11,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor11_data = {
+ .shared = &dove_xor1_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor11_channel = {
+ .name = MV_XOR_NAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(dove_xor11_resources),
+ .resource = dove_xor11_resources,
+ .dev = {
+ .dma_mask = &dove_xor1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor11_data,
+ },
+};
+
+void __init dove_xor1_init(void)
+{
+ platform_device_register(&dove_xor1_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
+ platform_device_register(&dove_xor10_channel);
+
+ dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
+ platform_device_register(&dove_xor11_channel);
+}
+
+void __init dove_init(void)
+{
+ int tclk;
+
+ tclk = get_tclk();
+
+ printk(KERN_INFO "Dove 88AP510 SoC, ");
+ printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+ dove_setup_cpu_mbus();
+
+ dove_ge00_shared_data.t_clk = tclk;
+ dove_uart0_data[0].uartclk = tclk;
+ dove_uart1_data[0].uartclk = tclk;
+ dove_uart2_data[0].uartclk = tclk;
+ dove_uart3_data[0].uartclk = tclk;
+ dove_spi0_data.tclk = tclk;
+ dove_spi1_data.tclk = tclk;
+
+ /* internal devices that every board has */
+ dove_rtc_init();
+ dove_xor0_init();
+ dove_xor1_init();
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
new file mode 100644
index 0000000..b29e893
--- /dev/null
+++ b/arch/arm/mach-dove/common.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-dove/common.h
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_DOVE_COMMON_H
+#define __ARCH_DOVE_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+extern struct sys_timer dove_timer;
+extern struct mbus_dram_target_info dove_mbus_dram_info;
+
+/*
+ * Basic Dove init functions used early by machine-setup.
+ */
+void dove_map_io(void);
+void dove_init(void);
+void dove_init_irq(void);
+void dove_setup_cpu_mbus(void);
+void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_sata_init(struct mv_sata_platform_data *sata_data);
+void dove_pcie_init(int init_port0, int init_port1);
+void dove_ehci0_init(void);
+void dove_ehci1_init(void);
+void dove_uart0_init(void);
+void dove_uart1_init(void);
+void dove_uart2_init(void);
+void dove_uart3_init(void);
+void dove_spi0_init(void);
+void dove_spi1_init(void);
+void dove_i2c_init(void);
+
+#endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
new file mode 100644
index 0000000..0260849
--- /dev/null
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+ .n_ports = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+ .type = "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &dove_db_spi_flash_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+ if (machine_is_dove_db())
+ dove_pcie_init(1, 1);
+
+ return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+ /*
+ * Basic Dove setup. Needs to be called early.
+ */
+ dove_init();
+
+ dove_ge00_init(&dove_db_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_sata_init(&dove_db_sata_data);
+ dove_spi0_init();
+ dove_spi1_init();
+ dove_uart0_init();
+ dove_uart1_init();
+ dove_i2c_init();
+ spi_register_board_info(dove_db_spi_flash_info,
+ ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+ .phys_io = DOVE_SB_REGS_PHYS_BASE,
+ .io_pg_offst = ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = dove_db_init,
+ .map_io = dove_map_io,
+ .init_irq = dove_init_irq,
+ .timer = &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
new file mode 100644
index 0000000..214a4c3
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CTRL_PCIE0_LINK 0x00000001
+#define CPU_RESET 0x00000002
+#define CPU_CTRL_PCIE1_LINK 0x00000008
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define FIQ_MASK_LOW_OFF 0x0008
+#define ENDPOINT_MASK_LOW_OFF 0x000c
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define FIQ_MASK_HIGH_OFF 0x0018
+#define ENDPOINT_MASK_HIGH_OFF 0x001c
+#define PCIE_INTERRUPT_MASK_OFF 0x0020
+
+#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
new file mode 100644
index 0000000..9b89ec7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
+ ldrne \rx, =DOVE_SB_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
new file mode 100644
index 0000000..f6a0839
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys virt size
+ * c8000000 fdb00000 1M Cryptographic SRAM
+ * e0000000 @runtime 128M PCIe-0 Memory space
+ * e8000000 @runtime 128M PCIe-1 Memory space
+ * f1000000 fde00000 8M on-chip south-bridge registers
+ * f1800000 fe600000 8M on-chip north-bridge registers
+ * f2000000 fee00000 1M PCIe-0 I/O space
+ * f2100000 fef00000 1M PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE 0xc8000000
+#define DOVE_CESA_VIRT_BASE 0xfdb00000
+#define DOVE_CESA_SIZE SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000
+#define DOVE_PCIE0_MEM_SIZE SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define DOVE_PCIE1_MEM_SIZE SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE 0xf8000000
+#define DOVE_BOOTROM_SIZE SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
+#define DOVE_SB_REGS_SIZE SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE 0xfe600000
+#define DOVE_NB_REGS_SIZE SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE 0x00000000
+#define DOVE_PCIE0_IO_SIZE SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE 0x00100000
+#define DOVE_PCIE1_IO_SIZE SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
+#define DOVE_NAND_GPIO_EN (1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
+#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
+#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
+#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
+#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_ON_AU1 (1 << 0)
+#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
+#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
new file mode 100644
index 0000000..e84c78c
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+
+ @ if no low interrupts set, check high interrupts
+ ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ moveq \irqnr, #63
+ andeqs \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
new file mode 100644
index 0000000..0ee70ff
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#define GPIO_MAX 64
+
+#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+ if (pin < NR_GPIO_IRQS)
+ return pin + IRQ_DOVE_GPIO_START;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+ if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+ return irq - IRQ_DOVE_GPIO_START;
+
+ return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h
new file mode 100644
index 0000000..32b0826
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/hardware.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver. */
+#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+ DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x) (((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+ DOVE_SB_REGS_PHYS_BASE)
+#endif
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
new file mode 100644
index 0000000..3b3e472
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+ DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
new file mode 100644
index 0000000..4668146
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE 0
+#define IRQ_DOVE_H2C 1
+#define IRQ_DOVE_C2H 2
+#define IRQ_DOVE_NAND 3
+#define IRQ_DOVE_PDMA 4
+#define IRQ_DOVE_SPI1 5
+#define IRQ_DOVE_SPI0 6
+#define IRQ_DOVE_UART_0 7
+#define IRQ_DOVE_UART_1 8
+#define IRQ_DOVE_UART_2 9
+#define IRQ_DOVE_UART_3 10
+#define IRQ_DOVE_I2C 11
+#define IRQ_DOVE_GPIO_0_7 12
+#define IRQ_DOVE_GPIO_8_15 13
+#define IRQ_DOVE_GPIO_16_23 14
+#define IRQ_DOVE_PCIE0_ERR 15
+#define IRQ_DOVE_PCIE0 16
+#define IRQ_DOVE_PCIE1_ERR 17
+#define IRQ_DOVE_PCIE1 18
+#define IRQ_DOVE_I2S0 19
+#define IRQ_DOVE_I2S0_ERR 20
+#define IRQ_DOVE_I2S1 21
+#define IRQ_DOVE_I2S1_ERR 22
+#define IRQ_DOVE_USB_ERR 23
+#define IRQ_DOVE_USB0 24
+#define IRQ_DOVE_USB1 25
+#define IRQ_DOVE_GE00_RX 26
+#define IRQ_DOVE_GE00_TX 27
+#define IRQ_DOVE_GE00_MISC 28
+#define IRQ_DOVE_GE00_SUM 29
+#define IRQ_DOVE_GE00_ERR 30
+#define IRQ_DOVE_CRYPTO 31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97 32
+#define IRQ_DOVE_PMU 33
+#define IRQ_DOVE_CAM 34
+#define IRQ_DOVE_SDIO0 35
+#define IRQ_DOVE_SDIO1 36
+#define IRQ_DOVE_SDIO0_WAKEUP 37
+#define IRQ_DOVE_SDIO1_WAKEUP 38
+#define IRQ_DOVE_XOR_00 39
+#define IRQ_DOVE_XOR_01 40
+#define IRQ_DOVE_XOR0_ERR 41
+#define IRQ_DOVE_XOR_10 42
+#define IRQ_DOVE_XOR_11 43
+#define IRQ_DOVE_XOR1_ERR 44
+#define IRQ_DOVE_LCD_DCON 45
+#define IRQ_DOVE_LCD1 46
+#define IRQ_DOVE_LCD0 47
+#define IRQ_DOVE_GPU 48
+#define IRQ_DOVE_PERFORM_MNTR 49
+#define IRQ_DOVE_VPRO_DMA1 51
+#define IRQ_DOVE_SSP_TIMER 54
+#define IRQ_DOVE_SSP 55
+#define IRQ_DOVE_MC_L2_ERR 56
+#define IRQ_DOVE_CRYPTO_ERR 59
+#define IRQ_DOVE_GPIO_24_31 60
+#define IRQ_DOVE_HIGH_GPIO 61
+#define IRQ_DOVE_SATA 62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START 64
+#define NR_GPIO_IRQS 64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS 7
+#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver. */
+#define IRQ_AC97 IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver. */
+#define IRQ_DMA IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver */
+#define IRQ_NAND IRQ_DOVE_NAND
+#endif
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
new file mode 100644
index 0000000..d668720
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/memory.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
new file mode 100644
index 0000000..3ad9f94
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38)
+#define CLOCK_GATING_USB0_MASK (1 << 0)
+#define CLOCK_GATING_USB1_MASK (1 << 1)
+#define CLOCK_GATING_GBE_MASK (1 << 2)
+#define CLOCK_GATING_SATA_MASK (1 << 3)
+#define CLOCK_GATING_PCIE0_MASK (1 << 4)
+#define CLOCK_GATING_PCIE1_MASK (1 << 5)
+#define CLOCK_GATING_SDIO0_MASK (1 << 8)
+#define CLOCK_GATING_SDIO1_MASK (1 << 9)
+#define CLOCK_GATING_NAND_MASK (1 << 10)
+#define CLOCK_GATING_CAMERA_MASK (1 << 11)
+#define CLOCK_GATING_I2S0_MASK (1 << 12)
+#define CLOCK_GATING_I2S1_MASK (1 << 13)
+#define CLOCK_GATING_CRYPTO_MASK (1 << 15)
+#define CLOCK_GATING_AC97_MASK (1 << 21)
+#define CLOCK_GATING_PDMA_MASK (1 << 22)
+#define CLOCK_GATING_XOR0_MASK (1 << 23)
+#define CLOCK_GATING_XOR1_MASK (1 << 24)
+#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30)
+
+#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+ if (pin < NR_PMU_IRQS)
+ return pin + IRQ_DOVE_PMU_START;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+ if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+ return irq - IRQ_DOVE_PMU_START;
+
+ return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
new file mode 100644
index 0000000..356afda
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
new file mode 100644
index 0000000..251d538
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
new file mode 100644
index 0000000..2c5cdd7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE 0x20
+
+static void putc(const char c)
+{
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ /* Transmit fifo not full? */
+ if (*UART_LSR & LSR_THRE)
+ break;
+ }
+
+ *UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
new file mode 100644
index 0000000..a952af2
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -0,0 +1,6 @@
+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfd800000
+
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
new file mode 100644
index 0000000..aaf0cb5
--- /dev/null
+++ b/arch/arm/mach-dove/irq.c
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-dove/irq.c
+ *
+ * Dove IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <plat/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/pm.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int irqoff;
+ BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
+
+ irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
+ 3 + irq - IRQ_DOVE_GPIO_24_31;
+
+ orion_gpio_irq_handler(irqoff << 3);
+ if (irq == IRQ_DOVE_HIGH_GPIO) {
+ orion_gpio_irq_handler(40);
+ orion_gpio_irq_handler(48);
+ orion_gpio_irq_handler(56);
+ }
+}
+
+static void pmu_irq_mask(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = readl(PMU_INTERRUPT_MASK);
+ u &= ~(1 << (pin & 31));
+ writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_unmask(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = readl(PMU_INTERRUPT_MASK);
+ u |= 1 << (pin & 31);
+ writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_ack(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = ~(1 << (pin & 31));
+ writel(u, PMU_INTERRUPT_CAUSE);
+}
+
+static struct irq_chip pmu_irq_chip = {
+ .name = "pmu_irq",
+ .mask = pmu_irq_mask,
+ .unmask = pmu_irq_unmask,
+ .ack = pmu_irq_ack,
+};
+
+static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
+
+ cause &= readl(PMU_INTERRUPT_MASK);
+ if (cause == 0) {
+ do_bad_IRQ(irq, desc);
+ return;
+ }
+
+ for (irq = 0; irq < NR_PMU_IRQS; irq++) {
+ if (!(cause & (1 << irq)))
+ continue;
+ irq = pmu_to_irq(irq);
+ desc = irq_desc + irq;
+ desc_handle_irq(irq, desc);
+ }
+}
+
+void __init dove_init_irq(void)
+{
+ int i;
+
+ orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+ orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+ /*
+ * Mask and clear GPIO IRQ interrupts.
+ */
+ writel(0, GPIO_LEVEL_MASK(0));
+ writel(0, GPIO_EDGE_MASK(0));
+ writel(0, GPIO_EDGE_CAUSE(0));
+
+ /*
+ * Mask and clear PMU interrupts
+ */
+ writel(0, PMU_INTERRUPT_MASK);
+ writel(0, PMU_INTERRUPT_CAUSE);
+
+ for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
+ set_irq_chip(i, &orion_gpio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ irq_desc[i].status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+ for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
+ set_irq_chip(i, &pmu_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ irq_desc[i].status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
+}
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
new file mode 100644
index 0000000..502d1ca
--- /dev/null
+++ b/arch/arm/mach-dove/pcie.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/mach-dove/pcie.c
+ *
+ * PCIe functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/delay.h>
+#include <plat/pcie.h>
+#include <mach/irqs.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+struct pcie_port {
+ u8 index;
+ u8 root_bus_nr;
+ void __iomem *base;
+ spinlock_t conf_lock;
+ char io_space_name[16];
+ char mem_space_name[16];
+ struct resource res[2];
+};
+
+static struct pcie_port pcie_port[2];
+static int num_pcie_ports;
+
+
+static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct pcie_port *pp;
+
+ if (nr >= num_pcie_ports)
+ return 0;
+
+ pp = &pcie_port[nr];
+ pp->root_bus_nr = sys->busnr;
+
+ /*
+ * Generic PCIe unit setup.
+ */
+ orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+ orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+
+ /*
+ * IORESOURCE_IO
+ */
+ snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+ "PCIe %d I/O", pp->index);
+ pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+ pp->res[0].name = pp->io_space_name;
+ if (pp->index == 0) {
+ pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
+ pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
+ } else {
+ pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
+ pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
+ }
+ pp->res[0].flags = IORESOURCE_IO;
+ if (request_resource(&ioport_resource, &pp->res[0]))
+ panic("Request PCIe IO resource failed\n");
+ sys->resource[0] = &pp->res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+ "PCIe %d MEM", pp->index);
+ pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+ pp->res[1].name = pp->mem_space_name;
+ if (pp->index == 0) {
+ pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
+ pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+ } else {
+ pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
+ pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+ }
+ pp->res[1].flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res[1]))
+ panic("Request PCIe Memory resource failed\n");
+ sys->resource[1] = &pp->res[1];
+
+ sys->resource[2] = NULL;
+
+ return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+ int i;
+
+ for (i = num_pcie_ports - 1; i >= 0; i--) {
+ int rbus = pcie_port[i].root_bus_nr;
+ if (rbus != -1 && rbus <= bus)
+ break;
+ }
+
+ return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+ /*
+ * Don't go out when trying to access nonexisting devices
+ * on the local bus.
+ */
+ if (bus == pp->root_bus_nr && dev > 1)
+ return 0;
+
+ return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct pcie_port *pp = bus_to_port(bus->number);
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ struct pcie_port *pp = bus_to_port(bus->number);
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops pcie_ops = {
+ .read = pcie_rd_conf,
+ .write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+ /*
+ * Prevent enumeration of root complex.
+ */
+ if (dev->bus->parent == NULL && dev->devfn == 0) {
+ int i;
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct pci_bus *bus;
+
+ if (nr < num_pcie_ports) {
+ bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+ } else {
+ bus = NULL;
+ BUG();
+ }
+
+ return bus;
+}
+
+static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+ return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
+static struct hw_pci dove_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = dove_pcie_setup,
+ .scan = dove_pcie_scan_bus,
+ .map_irq = dove_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int index, unsigned long base)
+{
+ printk(KERN_INFO "Dove PCIe port %d: ", index);
+
+ if (orion_pcie_link_up((void __iomem *)base)) {
+ struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+ printk(KERN_INFO "link up\n");
+
+ pp->index = index;
+ pp->root_bus_nr = -1;
+ pp->base = (void __iomem *)base;
+ spin_lock_init(&pp->conf_lock);
+ memset(pp->res, 0, sizeof(pp->res));
+ } else {
+ printk(KERN_INFO "link down, ignoring\n");
+ }
+}
+
+void __init dove_pcie_init(int init_port0, int init_port1)
+{
+ if (init_port0)
+ add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
+
+ if (init_port1)
+ add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
+
+ pci_common_init(&dove_pci);
+}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9264d81..1549863 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_V6
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 70f75d2..ebfe6c1 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -130,9 +130,16 @@ ENTRY(cpu_v6_set_pte_ext)
-
+ .type cpu_v6_name, #object
cpu_v6_name:
.asciz "ARMv6-compatible processor"
+ .size cpu_v6_name, . - cpu_v6_name
+
+ .type cpu_pj4_name, #object
+cpu_pj4_name:
+ .asciz "Marvell PJ4 processor"
+ .size cpu_pj4_name, . - cpu_pj4_name
+
.align
__INIT
@@ -241,3 +248,27 @@ __v6_proc_info:
.long v6_user_fns
.long v6_cache_fns
.size __v6_proc_info, . - __v6_proc_info
+
+ .type __pj4_v6_proc_info, #object
+__pj4_v6_proc_info:
+ .long 0x560f5810
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __v6_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pj4_name
+ .long v6_processor_functions
+ .long v6wbi_tlb_fns
+ .long v6_user_fns
+ .long v6_cache_fns
+ .size __v6_proc_info, . - __v6_proc_info
--
1.6.0.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 2/3] Add Tauros2 L2 cache controller support
2009-11-24 17:33 ` [PATCH 1/3] ARM: add base support for Marvell " Saeed Bishara
@ 2009-11-24 17:33 ` Saeed Bishara
2009-11-24 17:33 ` [PATCH 3/3] rtc: add support for Dove soc to the rtc-mv driver Saeed Bishara
2009-11-24 22:28 ` [PATCH 1/3] ARM: add base support for Marvell Dove SoC Saeed Bishara
` (2 subsequent siblings)
3 siblings, 1 reply; 20+ messages in thread
From: Saeed Bishara @ 2009-11-24 17:33 UTC (permalink / raw)
To: linux-arm-kernel
From: Lennert Buytenhek <buytenh@marvell.com>
Support for the Tauros2 L2 cache controller as used with the PJ1
and PJ4 CPUs.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
---
arch/arm/configs/dove_defconfig | 4 +-
arch/arm/include/asm/hardware/cache-tauros2.h | 11 +
arch/arm/mach-dove/common.c | 4 +
arch/arm/mm/Kconfig | 9 +
arch/arm/mm/Makefile | 2 +-
arch/arm/mm/cache-tauros2.c | 263 +++++++++++++++++++++++++
6 files changed, 291 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/include/asm/hardware/cache-tauros2.h
create mode 100644 arch/arm/mm/cache-tauros2.c
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index f2d1ea0..837bb52 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc6
-# Tue Nov 24 13:48:39 2009
+# Tue Nov 24 13:51:23 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -207,6 +207,8 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_TAUROS2=y
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_411920 is not set
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
new file mode 100644
index 0000000..dacfde9
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/plat-orion/include/plat/cache-tauros2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init tauros2_init(void);
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index a9248ce..bf66b13 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -20,6 +20,7 @@
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/spi/orion_spi.h>
+#include <asm/hardware/cache-tauros2.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/timex.h>
@@ -760,6 +761,9 @@ void __init dove_init(void)
printk(KERN_INFO "Dove 88AP510 SoC, ");
printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init();
+#endif
dove_setup_cpu_mbus();
dove_ge00_shared_data.t_clk = tclk;
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1549863..4958ef2 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -764,6 +764,15 @@ config CACHE_L2X0
help
This option enables the L2x0 PrimeCell.
+config CACHE_TAUROS2
+ bool "Enable the Tauros2 L2 cache controller"
+ depends on ARCH_DOVE
+ default y
+ select OUTER_CACHE
+ help
+ This option enables the Tauros2 L2 cache controller (as
+ found on PJ1/PJ4).
+
config CACHE_XSC3L2
bool "Enable the L2 cache on XScale3"
depends on CPU_XSC3
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2a..06bcf2e 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -87,4 +87,4 @@ obj-$(CONFIG_CPU_V7) += proc-v7.o
obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
-
+obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
new file mode 100644
index 0000000..5086865
--- /dev/null
+++ b/arch/arm/mm/cache-tauros2.c
@@ -0,0 +1,263 @@
+/*
+ * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - PJ1 CPU Core Datasheet,
+ * Document ID MV-S104837-01, Rev 0.7, January 24 2008.
+ * - PJ4 CPU Core Datasheet,
+ * Document ID MV-S105190-00, Rev 0.7, March 14 2008.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-tauros2.h>
+
+
+/*
+ * When Tauros2 is used on a CPU that supports the v7 hierarchical
+ * cache operations, the cache handling code in proc-v7.S takes care
+ * of everything, including handling DMA coherency.
+ *
+ * So, we only need to register outer cache operations here if we're
+ * being used on a pre-v7 CPU, and we only need to build support for
+ * outer cache operations into the kernel image if the kernel has been
+ * configured to support a pre-v7 CPU.
+ */
+#if __LINUX_ARM_ARCH__ < 7
+/*
+ * Low-level cache maintenance operations.
+ */
+static inline void tauros2_clean_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
+}
+
+static inline void tauros2_clean_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
+}
+
+static inline void tauros2_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive.
+ */
+#define CACHE_LINE_SIZE 32
+
+static void tauros2_inv_range(unsigned long start, unsigned long end)
+{
+ /*
+ * Clean and invalidate partial first cache line.
+ */
+ if (start & (CACHE_LINE_SIZE - 1)) {
+ tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+ start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+ }
+
+ /*
+ * Clean and invalidate partial last cache line.
+ */
+ if (end & (CACHE_LINE_SIZE - 1)) {
+ tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+ end &= ~(CACHE_LINE_SIZE - 1);
+ }
+
+ /*
+ * Invalidate all full cache lines between 'start' and 'end'.
+ */
+ while (start < end) {
+ tauros2_inv_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+
+static void tauros2_clean_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ while (start < end) {
+ tauros2_clean_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+
+static void tauros2_flush_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ while (start < end) {
+ tauros2_clean_inv_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+#endif
+
+static inline u32 __init read_extra_features(void)
+{
+ u32 u;
+
+ __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+ return u;
+}
+
+static inline void __init write_extra_features(u32 u)
+{
+ __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+ u32 u;
+
+ /*
+ * Read the CPU Extra Features register and verify that the
+ * Disable L2 Prefetch bit is set.
+ */
+ u = read_extra_features();
+ if (!(u & 0x01000000)) {
+ printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
+ write_extra_features(u | 0x01000000);
+ }
+}
+
+static inline int __init cpuid_scheme(void)
+{
+ extern int processor_id;
+
+ return !!((processor_id & 0x000f0000) == 0x000f0000);
+}
+
+static inline u32 __init read_mmfr3(void)
+{
+ u32 mmfr3;
+
+ __asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
+
+ return mmfr3;
+}
+
+static inline u32 __init read_actlr(void)
+{
+ u32 actlr;
+
+ __asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+
+ return actlr;
+}
+
+static inline void __init write_actlr(u32 actlr)
+{
+ __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
+}
+
+void __init tauros2_init(void)
+{
+ extern int processor_id;
+ char *mode;
+
+ disable_l2_prefetch();
+
+#ifdef CONFIG_CPU_32v5
+ if ((processor_id & 0xff0f0000) == 0x56050000) {
+ u32 feat;
+
+ /*
+ * v5 CPUs with Tauros2 have the L2 cache enable bit
+ * located in the CPU Extra Features register.
+ */
+ feat = read_extra_features();
+ if (!(feat & 0x00400000)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ write_extra_features(feat | 0x00400000);
+ }
+
+ mode = "ARMv5";
+ outer_cache.inv_range = tauros2_inv_range;
+ outer_cache.clean_range = tauros2_clean_range;
+ outer_cache.flush_range = tauros2_flush_range;
+ }
+#endif
+
+#ifdef CONFIG_CPU_32v6
+ /*
+ * Check whether this CPU lacks support for the v7 hierarchical
+ * cache ops. (PJ4 is in its v6 personality mode if the MMFR3
+ * register indicates no support for the v7 hierarchical cache
+ * ops.)
+ */
+ if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
+ /*
+ * When Tauros2 is used in an ARMv6 system, the L2
+ * enable bit is in the ARMv6 ARM-mandated position
+ * (bit [26] of the System Control Register).
+ */
+ if (!(get_cr() & 0x04000000)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ adjust_cr(0x04000000, 0x04000000);
+ }
+
+ mode = "ARMv6";
+ outer_cache.inv_range = tauros2_inv_range;
+ outer_cache.clean_range = tauros2_clean_range;
+ outer_cache.flush_range = tauros2_flush_range;
+ }
+#endif
+
+#ifdef CONFIG_CPU_32v7
+ /*
+ * Check whether this CPU has support for the v7 hierarchical
+ * cache ops. (PJ4 is in its v7 personality mode if the MMFR3
+ * register indicates support for the v7 hierarchical cache
+ * ops.)
+ *
+ * (Although strictly speaking there may exist CPUs that
+ * implement the v7 cache ops but are only ARMv6 CPUs (due to
+ * not complying with all of the other ARMv7 requirements),
+ * there are no real-life examples of Tauros2 being used on
+ * such CPUs as of yet.)
+ */
+ if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
+ u32 actlr;
+
+ /*
+ * When Tauros2 is used in an ARMv7 system, the L2
+ * enable bit is located in the Auxiliary System Control
+ * Register (which is the only register allowed by the
+ * ARMv7 spec to contain fine-grained cache control bits).
+ */
+ actlr = read_actlr();
+ if (!(actlr & 0x00000002)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ write_actlr(actlr | 0x00000002);
+ }
+
+ mode = "ARMv7";
+ }
+#endif
+
+ if (mode == NULL) {
+ printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
+ return;
+ }
+
+ printk(KERN_INFO "Tauros2: L2 cache support initialised "
+ "in %s mode.\n", mode);
+}
--
1.6.0.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 3/3] rtc: add support for Dove soc to the rtc-mv driver.
2009-11-24 17:33 ` [PATCH 2/3] Add Tauros2 L2 cache controller support Saeed Bishara
@ 2009-11-24 17:33 ` Saeed Bishara
0 siblings, 0 replies; 20+ messages in thread
From: Saeed Bishara @ 2009-11-24 17:33 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Saeed Bishara <saeed@marvell.com>
---
arch/arm/configs/dove_defconfig | 3 ++-
drivers/rtc/Kconfig | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 837bb52..b3a4916 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc6
-# Tue Nov 24 13:51:23 2009
+# Tue Nov 24 13:53:37 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -1209,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_MV=y
CONFIG_DMADEVICES=y
#
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3c20dae..e11e1cd 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -780,7 +780,7 @@ config RTC_DRV_TX4939
config RTC_DRV_MV
tristate "Marvell SoC RTC"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || ARCH_DOVE
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as
--
1.6.0.4
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-24 17:33 ` [PATCH 1/3] ARM: add base support for Marvell " Saeed Bishara
2009-11-24 17:33 ` [PATCH 2/3] Add Tauros2 L2 cache controller support Saeed Bishara
@ 2009-11-24 22:28 ` Saeed Bishara
2009-11-27 20:05 ` Russell King - ARM Linux
2009-12-04 5:41 ` Haojian Zhuang
2009-12-06 17:23 ` Russell King - ARM Linux
3 siblings, 1 reply; 20+ messages in thread
From: Saeed Bishara @ 2009-11-24 22:28 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
For some reason, my previous email didn't reach the mailing list.
Here is the patch as an attachment with some minor updates (replaced mach/gpio.h to linux/gpio.h)
saeed
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-ARM-add-base-support-for-Marvell-Dove-SoC.patch.bz2
Type: application/octet-stream
Size: 21270 bytes
Desc: 0001-ARM-add-base-support-for-Marvell-Dove-SoC.patch.bz2
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20091125/d0463ee0/attachment-0001.obj>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-24 22:28 ` [PATCH 1/3] ARM: add base support for Marvell Dove SoC Saeed Bishara
@ 2009-11-27 20:05 ` Russell King - ARM Linux
2009-11-27 20:48 ` Nicolas Pitre
0 siblings, 1 reply; 20+ messages in thread
From: Russell King - ARM Linux @ 2009-11-27 20:05 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 25, 2009 at 12:28:42AM +0200, Saeed Bishara wrote:
> For some reason, my previous email didn't reach the mailing list.
> Here is the patch as an attachment with some minor updates (replaced
> mach/gpio.h to linux/gpio.h)
Also #include <asm/io.h> and (any) #include <mach/io.h> -> linux/io.h please.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-27 20:05 ` Russell King - ARM Linux
@ 2009-11-27 20:48 ` Nicolas Pitre
2009-11-28 8:04 ` saeed bishara
0 siblings, 1 reply; 20+ messages in thread
From: Nicolas Pitre @ 2009-11-27 20:48 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 27 Nov 2009, Russell King - ARM Linux wrote:
> On Wed, Nov 25, 2009 at 12:28:42AM +0200, Saeed Bishara wrote:
> > For some reason, my previous email didn't reach the mailing list.
> > Here is the patch as an attachment with some minor updates (replaced
> > mach/gpio.h to linux/gpio.h)
>
> Also #include <asm/io.h> and (any) #include <mach/io.h> -> linux/io.h please.
I amended the orion Git repository directly to fix those.
Nicolas
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-27 20:48 ` Nicolas Pitre
@ 2009-11-28 8:04 ` saeed bishara
2009-11-28 16:41 ` Nicolas Pitre
2009-12-01 9:57 ` Russell King - ARM Linux
0 siblings, 2 replies; 20+ messages in thread
From: saeed bishara @ 2009-11-28 8:04 UTC (permalink / raw)
To: linux-arm-kernel
The board id that supported by this patch is 1788, the board name in
the machines registry updated to dove_db, but the Type Identifier
needs to be changed from MACH_TYPE_MACH_MARVELL_NEW1 to
MACH_TYPE_DOVE_DB.
saeed
On Fri, Nov 27, 2009 at 10:48 PM, Nicolas Pitre <nico@fluxnic.net> wrote:
> On Fri, 27 Nov 2009, Russell King - ARM Linux wrote:
>
>> On Wed, Nov 25, 2009 at 12:28:42AM +0200, Saeed Bishara wrote:
>> > ? ? For some reason, my previous email didn't reach the mailing list.
>> > ? ? Here is the patch as an attachment with some minor updates (replaced
>> > mach/gpio.h to linux/gpio.h)
>>
>> Also #include <asm/io.h> and (any) #include <mach/io.h> -> linux/io.h please.
>
> I amended the orion Git repository directly to fix those.
>
>
> Nicolas
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-28 8:04 ` saeed bishara
@ 2009-11-28 16:41 ` Nicolas Pitre
2009-11-28 18:09 ` Russell King - ARM Linux
2009-12-01 9:57 ` Russell King - ARM Linux
1 sibling, 1 reply; 20+ messages in thread
From: Nicolas Pitre @ 2009-11-28 16:41 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, 28 Nov 2009, saeed bishara wrote:
> The board id that supported by this patch is 1788, the board name in
> the machines registry updated to dove_db, but the Type Identifier
> needs to be changed from MACH_TYPE_MACH_MARVELL_NEW1 to
> MACH_TYPE_DOVE_DB.
The orion repo has the right machine identifier already. No changes
needed there.
Nicolas
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-28 16:41 ` Nicolas Pitre
@ 2009-11-28 18:09 ` Russell King - ARM Linux
2009-11-28 19:03 ` Nicolas Pitre
0 siblings, 1 reply; 20+ messages in thread
From: Russell King - ARM Linux @ 2009-11-28 18:09 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Nov 28, 2009 at 11:41:39AM -0500, Nicolas Pitre wrote:
> On Sat, 28 Nov 2009, saeed bishara wrote:
>
> > The board id that supported by this patch is 1788, the board name in
> > the machines registry updated to dove_db, but the Type Identifier
> > needs to be changed from MACH_TYPE_MACH_MARVELL_NEW1 to
> > MACH_TYPE_DOVE_DB.
>
> The orion repo has the right machine identifier already. No changes
> needed there.
Meanwhile, I've been deleting it from my updates to mainline ever since it
was created back in 2008 because it looked like someone screwed up their
entry, and registered 1789 instead of talking to me.
This means if I pull the dovedb stuff into mainline now, it's probably
going to break builds.
Since I've only just updated the mach-types file in mainline this week,
I'm not happy about adding it in, especially as the current update is
still outstanding for Linus.
A little bit of communication goes a long way...
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-28 18:09 ` Russell King - ARM Linux
@ 2009-11-28 19:03 ` Nicolas Pitre
0 siblings, 0 replies; 20+ messages in thread
From: Nicolas Pitre @ 2009-11-28 19:03 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, 28 Nov 2009, Russell King - ARM Linux wrote:
> On Sat, Nov 28, 2009 at 11:41:39AM -0500, Nicolas Pitre wrote:
> > On Sat, 28 Nov 2009, saeed bishara wrote:
> >
> > > The board id that supported by this patch is 1788, the board name in
> > > the machines registry updated to dove_db, but the Type Identifier
> > > needs to be changed from MACH_TYPE_MACH_MARVELL_NEW1 to
> > > MACH_TYPE_DOVE_DB.
> >
> > The orion repo has the right machine identifier already. No changes
> > needed there.
>
> Meanwhile, I've been deleting it from my updates to mainline ever since it
> was created back in 2008 because it looked like someone screwed up their
> entry, and registered 1789 instead of talking to me.
>
> This means if I pull the dovedb stuff into mainline now, it's probably
> going to break builds.
I think we can live with that. Things will fix themselves when both the
machine id update and the Dove support are merged together upstream.
Dove is a new architecture so no one ever attempted to build it before
anyway.
Nicolas
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-28 8:04 ` saeed bishara
2009-11-28 16:41 ` Nicolas Pitre
@ 2009-12-01 9:57 ` Russell King - ARM Linux
2009-12-01 10:10 ` Saeed Bishara
1 sibling, 1 reply; 20+ messages in thread
From: Russell King - ARM Linux @ 2009-12-01 9:57 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Nov 28, 2009 at 10:04:06AM +0200, saeed bishara wrote:
> The board id that supported by this patch is 1788, the board name in
> the machines registry updated to dove_db, but the Type Identifier
> needs to be changed from MACH_TYPE_MACH_MARVELL_NEW1 to
> MACH_TYPE_DOVE_DB.
Unable to do so. There's another platform using MACH_TYPE_DOVE_DB.
Please chose a different name for your platform.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-12-01 9:57 ` Russell King - ARM Linux
@ 2009-12-01 10:10 ` Saeed Bishara
0 siblings, 0 replies; 20+ messages in thread
From: Saeed Bishara @ 2009-12-01 10:10 UTC (permalink / raw)
To: linux-arm-kernel
>
>Unable to do so. There's another platform using MACH_TYPE_DOVE_DB.
[saeed] can you please change the name of the later platform (id 2552) to MACH_TYPE_DOVE_DB2?
>
>Please chose a different name for your platform.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-24 17:33 ` [PATCH 1/3] ARM: add base support for Marvell " Saeed Bishara
2009-11-24 17:33 ` [PATCH 2/3] Add Tauros2 L2 cache controller support Saeed Bishara
2009-11-24 22:28 ` [PATCH 1/3] ARM: add base support for Marvell Dove SoC Saeed Bishara
@ 2009-12-04 5:41 ` Haojian Zhuang
2009-12-04 17:37 ` Nicolas Pitre
2009-12-06 12:44 ` saeed bishara
2009-12-06 17:23 ` Russell King - ARM Linux
3 siblings, 2 replies; 20+ messages in thread
From: Haojian Zhuang @ 2009-12-04 5:41 UTC (permalink / raw)
To: linux-arm-kernel
> diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
> index 70f75d2..ebfe6c1 100644
> --- a/arch/arm/mm/proc-v6.S
> +++ b/arch/arm/mm/proc-v6.S
> @@ -130,9 +130,16 @@ ENTRY(cpu_v6_set_pte_ext)
>
>
>
> -
> + ? ? ? .type ? cpu_v6_name, #object
> ?cpu_v6_name:
> ? ? ? ?.asciz ?"ARMv6-compatible processor"
> + ? ? ? .size ? cpu_v6_name, . - cpu_v6_name
> +
> + ? ? ? .type ? cpu_pj4_name, #object
> +cpu_pj4_name:
> + ? ? ? .asciz ?"Marvell PJ4 processor"
> + ? ? ? .size ? cpu_pj4_name, . - cpu_pj4_name
> +
> ? ? ? ?.align
>
> ? ? ? ?__INIT
> @@ -241,3 +248,27 @@ __v6_proc_info:
> ? ? ? ?.long ? v6_user_fns
> ? ? ? ?.long ? v6_cache_fns
> ? ? ? ?.size ? __v6_proc_info, . - __v6_proc_info
> +
> + ? ? ? .type ? __pj4_v6_proc_info, #object
> +__pj4_v6_proc_info:
> + ? ? ? .long ? 0x560f5810
> + ? ? ? .long ? 0xff0ffff0
> + ? ? ? .long ? PMD_TYPE_SECT | \
> + ? ? ? ? ? ? ? PMD_SECT_BUFFERABLE | \
> + ? ? ? ? ? ? ? PMD_SECT_CACHEABLE | \
These two flags are different from flags used in v6 proc_info. Is PJ4
full compatible to armv6? Is there any reason to select
PMD_SECT_BUFFERABLE & PMD_SECT_CACHEABLE at here?
> + ? ? ? ? ? ? ? PMD_SECT_AP_WRITE | \
> + ? ? ? ? ? ? ? PMD_SECT_AP_READ
> + ? ? ? .long ? PMD_TYPE_SECT | \
> + ? ? ? ? ? ? ? PMD_SECT_XN | \
> + ? ? ? ? ? ? ? PMD_SECT_AP_WRITE | \
> + ? ? ? ? ? ? ? PMD_SECT_AP_READ
> + ? ? ? b ? ? ? __v6_setup
> + ? ? ? .long ? cpu_arch_name
> + ? ? ? .long ? cpu_elf_name
> + ? ? ? .long ? HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
> + ? ? ? .long ? cpu_pj4_name
> + ? ? ? .long ? v6_processor_functions
> + ? ? ? .long ? v6wbi_tlb_fns
> + ? ? ? .long ? v6_user_fns
> + ? ? ? .long ? v6_cache_fns
> + ? ? ? .size ? __v6_proc_info, . - __v6_proc_info
You created __pj4_v6_proc_info. But you still used __v6_proc_info at here. Why?
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-12-04 5:41 ` Haojian Zhuang
@ 2009-12-04 17:37 ` Nicolas Pitre
2009-12-06 12:44 ` saeed bishara
1 sibling, 0 replies; 20+ messages in thread
From: Nicolas Pitre @ 2009-12-04 17:37 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 4 Dec 2009, Haojian Zhuang wrote:
> > + ? ? ? .long ? cpu_pj4_name
> > + ? ? ? .long ? v6_processor_functions
> > + ? ? ? .long ? v6wbi_tlb_fns
> > + ? ? ? .long ? v6_user_fns
> > + ? ? ? .long ? v6_cache_fns
> > + ? ? ? .size ? __v6_proc_info, . - __v6_proc_info
> You created __pj4_v6_proc_info. But you still used __v6_proc_info at
> here. Why?
I fixed that one already when committing the patch into Git.
Nicolas
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-12-04 5:41 ` Haojian Zhuang
2009-12-04 17:37 ` Nicolas Pitre
@ 2009-12-06 12:44 ` saeed bishara
2009-12-06 15:42 ` Nicolas Pitre
1 sibling, 1 reply; 20+ messages in thread
From: saeed bishara @ 2009-12-06 12:44 UTC (permalink / raw)
To: linux-arm-kernel
>> +__pj4_v6_proc_info:
>> + ? ? ? .long ? 0x560f5810
>> + ? ? ? .long ? 0xff0ffff0
>> + ? ? ? .long ? PMD_TYPE_SECT | \
>> + ? ? ? ? ? ? ? PMD_SECT_BUFFERABLE | \
>> + ? ? ? ? ? ? ? PMD_SECT_CACHEABLE | \
> These two flags are different from flags used in v6 proc_info. Is PJ4
> full compatible to armv6? Is there any reason to select
> PMD_SECT_BUFFERABLE & PMD_SECT_CACHEABLE at here?
good catch, those flags should be replace with PMD_FLAGS, this with
break SMP support according to the following commit:
"ARM: ensure initial page tables are setup for SMP systems"
Nico, should I send a patch that deletes those flags or to resend the
updated patch?
saeed
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-12-06 12:44 ` saeed bishara
@ 2009-12-06 15:42 ` Nicolas Pitre
2009-12-06 16:13 ` saeed bishara
0 siblings, 1 reply; 20+ messages in thread
From: Nicolas Pitre @ 2009-12-06 15:42 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, 6 Dec 2009, saeed bishara wrote:
> >> +__pj4_v6_proc_info:
> >> + ? ? ? .long ? 0x560f5810
> >> + ? ? ? .long ? 0xff0ffff0
> >> + ? ? ? .long ? PMD_TYPE_SECT | \
> >> + ? ? ? ? ? ? ? PMD_SECT_BUFFERABLE | \
> >> + ? ? ? ? ? ? ? PMD_SECT_CACHEABLE | \
> > These two flags are different from flags used in v6 proc_info. Is PJ4
> > full compatible to armv6? Is there any reason to select
> > PMD_SECT_BUFFERABLE & PMD_SECT_CACHEABLE at here?
> good catch, those flags should be replace with PMD_FLAGS, this with
> break SMP support according to the following commit:
> "ARM: ensure initial page tables are setup for SMP systems"
>
> Nico, should I send a patch that deletes those flags or to resend the
> updated patch?
Please simply send a patch to fix it on top of what's already in the Git
repo.
Nicolas
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-12-06 15:42 ` Nicolas Pitre
@ 2009-12-06 16:13 ` saeed bishara
0 siblings, 0 replies; 20+ messages in thread
From: saeed bishara @ 2009-12-06 16:13 UTC (permalink / raw)
To: linux-arm-kernel
>> >> +__pj4_v6_proc_info:
>> >> + ? ? ? .long ? 0x560f5810
>> >> + ? ? ? .long ? 0xff0ffff0
>> >> + ? ? ? .long ? PMD_TYPE_SECT | \
>> >> + ? ? ? ? ? ? ? PMD_SECT_BUFFERABLE | \
>> >> + ? ? ? ? ? ? ? PMD_SECT_CACHEABLE | \
>> > These two flags are different from flags used in v6 proc_info. Is PJ4
>> > full compatible to armv6? Is there any reason to select
>> > PMD_SECT_BUFFERABLE & PMD_SECT_CACHEABLE at here?
>> good catch, those flags should be replace with PMD_FLAGS, this with
>> break SMP support according to the following commit:
>> "ARM: ensure initial page tables are setup for SMP systems"
>>
>> Nico, should I send a patch that deletes those flags or to resend the
>> updated patch?
>
> Please simply send a patch to fix it on top of what's already in the Git
> repo.
>
>
> Nicolas
>
Here it is:
---------------------------------------------------
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-11-24 17:33 ` [PATCH 1/3] ARM: add base support for Marvell " Saeed Bishara
` (2 preceding siblings ...)
2009-12-04 5:41 ` Haojian Zhuang
@ 2009-12-06 17:23 ` Russell King - ARM Linux
2009-12-07 1:35 ` Nicolas Pitre
3 siblings, 1 reply; 20+ messages in thread
From: Russell King - ARM Linux @ 2009-12-06 17:23 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 24, 2009 at 07:33:51PM +0200, Saeed Bishara wrote:
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 9264d81..1549863 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID
>
> # ARMv6
> config CPU_V6
> - bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
> + bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
Should I assume that the V6 processor is optional on Dove? Does it run
without a processor present? Probably not.
If so, then you don't want to append to this line - doing so makes the
option visible. If your platform _always_ has a V6 processor, select
it just like everyone else does.
The only reason to extend that conditional is if a V6 processor is
to be optional.
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH 1/3] ARM: add base support for Marvell Dove SoC
2009-12-06 17:23 ` Russell King - ARM Linux
@ 2009-12-07 1:35 ` Nicolas Pitre
0 siblings, 0 replies; 20+ messages in thread
From: Nicolas Pitre @ 2009-12-07 1:35 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, 6 Dec 2009, Russell King - ARM Linux wrote:
> On Tue, Nov 24, 2009 at 07:33:51PM +0200, Saeed Bishara wrote:
> > diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> > index 9264d81..1549863 100644
> > --- a/arch/arm/mm/Kconfig
> > +++ b/arch/arm/mm/Kconfig
> > @@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID
> >
> > # ARMv6
> > config CPU_V6
> > - bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
> > + bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
>
> Should I assume that the V6 processor is optional on Dove? Does it run
> without a processor present? Probably not.
There is an ARMv7 option too.
> If so, then you don't want to append to this line - doing so makes the
> option visible. If your platform _always_ has a V6 processor, select
> it just like everyone else does.
>
> The only reason to extend that conditional is if a V6 processor is
> to be optional.
It is.
Nicolas
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2009-12-07 1:35 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-11-24 17:33 [PATCH 0/3] add support for Marvell's Dove SoC Saeed Bishara
2009-11-24 17:33 ` [PATCH 1/3] ARM: add base support for Marvell " Saeed Bishara
2009-11-24 17:33 ` [PATCH 2/3] Add Tauros2 L2 cache controller support Saeed Bishara
2009-11-24 17:33 ` [PATCH 3/3] rtc: add support for Dove soc to the rtc-mv driver Saeed Bishara
2009-11-24 22:28 ` [PATCH 1/3] ARM: add base support for Marvell Dove SoC Saeed Bishara
2009-11-27 20:05 ` Russell King - ARM Linux
2009-11-27 20:48 ` Nicolas Pitre
2009-11-28 8:04 ` saeed bishara
2009-11-28 16:41 ` Nicolas Pitre
2009-11-28 18:09 ` Russell King - ARM Linux
2009-11-28 19:03 ` Nicolas Pitre
2009-12-01 9:57 ` Russell King - ARM Linux
2009-12-01 10:10 ` Saeed Bishara
2009-12-04 5:41 ` Haojian Zhuang
2009-12-04 17:37 ` Nicolas Pitre
2009-12-06 12:44 ` saeed bishara
2009-12-06 15:42 ` Nicolas Pitre
2009-12-06 16:13 ` saeed bishara
2009-12-06 17:23 ` Russell King - ARM Linux
2009-12-07 1:35 ` Nicolas Pitre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.