* Solidrun ClearFog Base and Huawei MA5671A SFP @ 2020-12-26 21:41 Hamza Mahfooz [not found] ` <8394f1c8-0b27-c1aa-37d4-77d65bdccade@gmail.com> 0 siblings, 1 reply; 3+ messages in thread From: Hamza Mahfooz @ 2020-12-26 21:41 UTC (permalink / raw) To: netdev Hey, has anyone got the ClearFog (ARMADA 388 SoC) to work with the MA5671A? I've to been trying to get the ClearFog to read the MA5671A's EEPROM however it always throws the following error: > # dmesg | grep sfp > [ 4.550651] sfp sfp: Host maximum power 2.0W > [ 5.875047] sfp sfp: please wait, module slow to respond > [ 61.295045] sfp sfp: failed to read EEPROM: -6 I've tried to increase the retry timeout in `/drivers/net/phy/sfp.c` (i.e. T_PROBE_RETRY_SLOW) so far, any suggestions would be appreciated. Also, I'm on kernel version 5.9.13. ^ permalink raw reply [flat|nested] 3+ messages in thread
[parent not found: <8394f1c8-0b27-c1aa-37d4-77d65bdccade@gmail.com>]
* Re: Fwd: Solidrun ClearFog Base and Huawei MA5671A SFP [not found] ` <8394f1c8-0b27-c1aa-37d4-77d65bdccade@gmail.com> @ 2020-12-26 22:27 ` Russell King - ARM Linux admin 2020-12-27 19:34 ` Hamza Mahfooz 0 siblings, 1 reply; 3+ messages in thread From: Russell King - ARM Linux admin @ 2020-12-26 22:27 UTC (permalink / raw) To: Hamza Mahfooz; +Cc: Heiner Kallweit, netdev Sorry, this will not work. The MA5671A modules are configured to use dying gasp on pin 7, and pin 7 is grounded on the Armada 388 Clearfog platforms, resulting in the module not booting. I'm sorry, I can't recommend a module; I don't use SFP GPON modules myself. On Sat, Dec 26, 2020 at 11:15:18PM +0100, Heiner Kallweit wrote: > Sounds like something where you may be able to help. > > Heiner > > -------- Forwarded Message -------- > Subject: Solidrun ClearFog Base and Huawei MA5671A SFP > Date: Sat, 26 Dec 2020 16:41:40 -0500 > From: Hamza Mahfooz <someguy@effective-light.com> > To: netdev@vger.kernel.org > > Hey, has anyone got the ClearFog (ARMADA 388 SoC) to work with the > MA5671A? I've to been trying to get the ClearFog to read the MA5671A's > EEPROM however it always throws the following error: > > > # dmesg | grep sfp > > [ 4.550651] sfp sfp: Host maximum power 2.0W > > [ 5.875047] sfp sfp: please wait, module slow to respond > > [ 61.295045] sfp sfp: failed to read EEPROM: -6 > > I've tried to increase the retry timeout in `/drivers/net/phy/sfp.c` > (i.e. T_PROBE_RETRY_SLOW) so far, any suggestions would be appreciated. > Also, I'm on kernel version 5.9.13. > > > -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last! ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Fwd: Solidrun ClearFog Base and Huawei MA5671A SFP 2020-12-26 22:27 ` Fwd: " Russell King - ARM Linux admin @ 2020-12-27 19:34 ` Hamza Mahfooz 0 siblings, 0 replies; 3+ messages in thread From: Hamza Mahfooz @ 2020-12-27 19:34 UTC (permalink / raw) To: Russell King - ARM Linux admin; +Cc: Heiner Kallweit, netdev Would it not be possible to disable dying gasp (assuming I can access the module using some other hardware)? On Sat, Dec 26, 2020 at 10:27 pm, Russell King - ARM Linux admin <linux@armlinux.org.uk> wrote: > Sorry, this will not work. The MA5671A modules are configured to use > dying gasp on pin 7, and pin 7 is grounded on the Armada 388 Clearfog > platforms, resulting in the module not booting. > > I'm sorry, I can't recommend a module; I don't use SFP GPON modules > myself. > > On Sat, Dec 26, 2020 at 11:15:18PM +0100, Heiner Kallweit wrote: >> Sounds like something where you may be able to help. >> >> Heiner >> >> -------- Forwarded Message -------- >> Subject: Solidrun ClearFog Base and Huawei MA5671A SFP >> Date: Sat, 26 Dec 2020 16:41:40 -0500 >> From: Hamza Mahfooz <someguy@effective-light.com> >> To: netdev@vger.kernel.org >> >> Hey, has anyone got the ClearFog (ARMADA 388 SoC) to work with the >> MA5671A? I've to been trying to get the ClearFog to read the >> MA5671A's >> EEPROM however it always throws the following error: >> >> > # dmesg | grep sfp >> > [ 4.550651] sfp sfp: Host maximum power 2.0W >> > [ 5.875047] sfp sfp: please wait, module slow to respond >> > [ 61.295045] sfp sfp: failed to read EEPROM: -6 >> >> I've tried to increase the retry timeout in `/drivers/net/phy/sfp.c` >> (i.e. T_PROBE_RETRY_SLOW) so far, any suggestions would be >> appreciated. >> Also, I'm on kernel version 5.9.13. >> >> >> > > -- > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ > FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last! ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-12-27 19:40 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-12-26 21:41 Solidrun ClearFog Base and Huawei MA5671A SFP Hamza Mahfooz [not found] ` <8394f1c8-0b27-c1aa-37d4-77d65bdccade@gmail.com> 2020-12-26 22:27 ` Fwd: " Russell King - ARM Linux admin 2020-12-27 19:34 ` Hamza Mahfooz
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.