* [PATCH v3 0/3] Add OTG support for Ingenic SoCs. @ 2022-04-14 19:25 周琰杰 (Zhou Yanjie) 2022-04-14 19:25 ` [PATCH v3 1/3] dt-bindings: dwc2: Add bindings for new " 周琰杰 (Zhou Yanjie) ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: 周琰杰 (Zhou Yanjie) @ 2022-04-14 19:25 UTC (permalink / raw) To: gregkh, hminas, robh+dt, krzk+dt, tsbogend, paul Cc: linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu 1.Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC. 2.Introduce support for disable Ingenic overcurrent detection, once selected it enables GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to disable the VBUS overcurrent detection. v1->v2: 1.Add Rob Herring's Acked-by. 2.Add Minas Harutyunyan's Acked-by. 3.Use "activate_ingenic_overcurrent_detection" instead "deactivate_ingenic_overcurrent_detection" as Greg's suggestion. v2->v3: Refresh USB nodes in device tree files, remove "snps,dwc2" since it is nolonger needed. 周琰杰 (Zhou Yanjie) (3): dt-bindings: dwc2: Add bindings for new Ingenic SoCs. USB: dwc2: Add OTG support for Ingenic SoCs. MIPS: Ingenic: Refresh USB nodes to match driver changes. Documentation/devicetree/bindings/usb/dwc2.yaml | 7 ++++ arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +- arch/mips/boot/dts/ingenic/x1000.dtsi | 2 +- arch/mips/boot/dts/ingenic/x1830.dtsi | 2 +- drivers/usb/dwc2/core.c | 9 +++++ drivers/usb/dwc2/core.h | 5 +++ drivers/usb/dwc2/params.c | 50 ++++++++++++++++++++++++- 7 files changed, 73 insertions(+), 4 deletions(-) -- 2.7.4 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 1/3] dt-bindings: dwc2: Add bindings for new Ingenic SoCs. 2022-04-14 19:25 [PATCH v3 0/3] Add OTG support for Ingenic SoCs 周琰杰 (Zhou Yanjie) @ 2022-04-14 19:25 ` 周琰杰 (Zhou Yanjie) 2022-04-16 16:34 ` Paul Cercueil 2022-04-14 19:25 ` [PATCH v3 2/3] USB: dwc2: Add OTG support for " 周琰杰 (Zhou Yanjie) 2022-04-14 19:25 ` [PATCH v3 3/3] MIPS: Ingenic: Refresh USB nodes to match driver changes 周琰杰 (Zhou Yanjie) 2 siblings, 1 reply; 9+ messages in thread From: 周琰杰 (Zhou Yanjie) @ 2022-04-14 19:25 UTC (permalink / raw) To: gregkh, hminas, robh+dt, krzk+dt, tsbogend, paul Cc: linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu Add the dwc2 bindings for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Rob Herring <robh@kernel.org> --- Notes: v1->v2: Add Rob Herring's Acked-by. v2->v3: No change. Documentation/devicetree/bindings/usb/dwc2.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 4cebce6..c6e8c0b 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -17,6 +17,13 @@ properties: oneOf: - const: brcm,bcm2835-usb - const: hisilicon,hi6220-usb + - const: ingenic,jz4775-otg + - const: ingenic,jz4780-otg + - const: ingenic,x1000-otg + - const: ingenic,x1600-otg + - const: ingenic,x1700-otg + - const: ingenic,x1830-otg + - const: ingenic,x2000-otg - items: - const: rockchip,rk3066-usb - const: snps,dwc2 -- 2.7.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: dwc2: Add bindings for new Ingenic SoCs. 2022-04-14 19:25 ` [PATCH v3 1/3] dt-bindings: dwc2: Add bindings for new " 周琰杰 (Zhou Yanjie) @ 2022-04-16 16:34 ` Paul Cercueil 2022-04-17 9:27 ` Zhou Yanjie 0 siblings, 1 reply; 9+ messages in thread From: Paul Cercueil @ 2022-04-16 16:34 UTC (permalink / raw) To: 周琰杰 Cc: gregkh, hminas, robh+dt, krzk+dt, tsbogend, linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu Hi Zhou, Le ven., avril 15 2022 at 03:25:35 +0800, 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> a écrit : > Add the dwc2 bindings for the JZ4775 SoC, the JZ4780 SoC, the X1000 > SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC > from Ingenic. > > Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > > Notes: > v1->v2: > Add Rob Herring's Acked-by. > > v2->v3: > No change. > > Documentation/devicetree/bindings/usb/dwc2.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml > b/Documentation/devicetree/bindings/usb/dwc2.yaml > index 4cebce6..c6e8c0b 100644 > --- a/Documentation/devicetree/bindings/usb/dwc2.yaml > +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml > @@ -17,6 +17,13 @@ properties: > oneOf: > - const: brcm,bcm2835-usb > - const: hisilicon,hi6220-usb > + - const: ingenic,jz4775-otg > + - const: ingenic,jz4780-otg > + - const: ingenic,x1000-otg The driver handles the JZ4775, JZ4780 and X1000 the exact same way. Maybe the latter two should use the JZ4775 string as the fallback? Do you know if the IP cores are any different? > + - const: ingenic,x1600-otg > + - const: ingenic,x1700-otg > + - const: ingenic,x1830-otg Same here (and btw, first time I hear about the X1600 and X1700 ;)) Cheers, -Paul > + - const: ingenic,x2000-otg > - items: > - const: rockchip,rk3066-usb > - const: snps,dwc2 > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: dwc2: Add bindings for new Ingenic SoCs. 2022-04-16 16:34 ` Paul Cercueil @ 2022-04-17 9:27 ` Zhou Yanjie 0 siblings, 0 replies; 9+ messages in thread From: Zhou Yanjie @ 2022-04-17 9:27 UTC (permalink / raw) To: Paul Cercueil Cc: gregkh, hminas, robh+dt, krzk+dt, tsbogend, linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu Hi Paul, On 2022/4/17 上午12:34, Paul Cercueil wrote: > Hi Zhou, > > Le ven., avril 15 2022 at 03:25:35 +0800, 周琰杰 (Zhou Yanjie) > <zhouyanjie@wanyeetech.com> a écrit : >> Add the dwc2 bindings for the JZ4775 SoC, the JZ4780 SoC, the X1000 >> SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC >> from Ingenic. >> >> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> >> Acked-by: Rob Herring <robh@kernel.org> >> --- >> >> Notes: >> v1->v2: >> Add Rob Herring's Acked-by. >> >> v2->v3: >> No change. >> >> Documentation/devicetree/bindings/usb/dwc2.yaml | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml >> b/Documentation/devicetree/bindings/usb/dwc2.yaml >> index 4cebce6..c6e8c0b 100644 >> --- a/Documentation/devicetree/bindings/usb/dwc2.yaml >> +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml >> @@ -17,6 +17,13 @@ properties: >> oneOf: >> - const: brcm,bcm2835-usb >> - const: hisilicon,hi6220-usb >> + - const: ingenic,jz4775-otg >> + - const: ingenic,jz4780-otg >> + - const: ingenic,x1000-otg > > The driver handles the JZ4775, JZ4780 and X1000 the exact same way. > Maybe the latter two should use the JZ4775 string as the fallback? Do > you know if the IP cores are any different? > From the manual, it seems that JZ4775 and JZ4780 should have the same specifications, but in fact, the behavior of JZ4775 and JZ4780 is different, especially if the JZ4780 does not turn off overcurrent detection, there will be a high probability of affecting the use, while the JZ4775 does not have this problem, so I think they should actually be different. The manual of X1000 shows that it has only 8 endpoints, which is different from JZ4775 and JZ4780. From the experimental results, it seems that the three of them can use the same set of parameters, but in order to avoid hidden dangers that have not been found for the time being, I think it seems necessary to keep three independent compatible strings. >> + - const: ingenic,x1600-otg >> + - const: ingenic,x1700-otg >> + - const: ingenic,x1830-otg > > Same here (and btw, first time I hear about the X1600 and X1700 ;)) The OTG of X1600 and X1700 seem to be the same, I will remove the compatibility string of X1700 in the next version, but the device tree of X1830 in Ingenic SDK is configured with different parameters from X1600/X1700, so I believe the X1830 should be a little different from the X1600/X1700, so although the experimental results show that the three of them seem to be able to use the same parameters, it seems that it is more appropriate to keep the compatibe string of X1830. I also heard about the X1600 and X1700 not long ago. From the existing information, the X1600 should be the only SoC with CAN in the known models of Ingenic. And the X1700 is more like an SoC that focuses on display applications. Thanks and best regards! > > Cheers, > -Paul > >> + - const: ingenic,x2000-otg >> - items: >> - const: rockchip,rk3066-usb >> - const: snps,dwc2 >> -- >> 2.7.4 >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 2/3] USB: dwc2: Add OTG support for Ingenic SoCs. 2022-04-14 19:25 [PATCH v3 0/3] Add OTG support for Ingenic SoCs 周琰杰 (Zhou Yanjie) 2022-04-14 19:25 ` [PATCH v3 1/3] dt-bindings: dwc2: Add bindings for new " 周琰杰 (Zhou Yanjie) @ 2022-04-14 19:25 ` 周琰杰 (Zhou Yanjie) 2022-04-14 19:25 ` [PATCH v3 3/3] MIPS: Ingenic: Refresh USB nodes to match driver changes 周琰杰 (Zhou Yanjie) 2 siblings, 0 replies; 9+ messages in thread From: 周琰杰 (Zhou Yanjie) @ 2022-04-14 19:25 UTC (permalink / raw) To: gregkh, hminas, robh+dt, krzk+dt, tsbogend, paul Cc: linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC from Ingenic. Introduce support for disable Ingenic overcurrent detection, once selected, it enables the GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to disable the VBUS overcurrent detection. This patch is derived from Dragan Čečavac (in the kernel 3.18.3 tree of CI20). It is very useful for the MIPS Creator CI20 (r1). Without this patch, OTG port of CI20 has a great probability to face overcurrent warning, which breaks the OTG functionality. Signed-off-by: Dragan Čečavac <dragancecavac@yahoo.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> --- Notes: v1->v2: 1.Add Minas Harutyunyan's Acked-by. 2.Use "activate_ingenic_overcurrent_detection" instead "deactivate_ingenic_overcurrent_detection" as Greg's suggestion. v2->v3: No change. drivers/usb/dwc2/core.c | 9 +++++++++ drivers/usb/dwc2/core.h | 5 +++++ drivers/usb/dwc2/params.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 63 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index cf0bcd0..dc4fc72 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -1153,6 +1153,7 @@ static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg) int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) { u32 usbcfg; + u32 otgctl; int retval = 0; if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL || @@ -1187,6 +1188,14 @@ int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) dwc2_writel(hsotg, usbcfg, GUSBCFG); } + if (!hsotg->params.activate_ingenic_overcurrent_detection) { + if (dwc2_is_host_mode(hsotg)) { + otgctl = readl(hsotg->regs + GOTGCTL); + otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL; + writel(otgctl, hsotg->regs + GOTGCTL); + } + } + return retval; } diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 88c337b..0683852 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -426,6 +426,10 @@ enum dwc2_ep0_state { * detection using GGPIO register. * 0 - Deactivate the external level detection (default) * 1 - Activate the external level detection + * @activate_ingenic_overcurrent_detection: Activate Ingenic overcurrent + * detection. + * 0 - Deactivate the overcurrent detection + * 1 - Activate the overcurrent detection (default) * @g_dma: Enables gadget dma usage (default: autodetect). * @g_dma_desc: Enables gadget descriptor DMA (default: autodetect). * @g_rx_fifo_size: The periodic rx fifo size for the device, in @@ -494,6 +498,7 @@ struct dwc2_core_params { u8 hird_threshold; bool activate_stm_fs_transceiver; bool activate_stm_id_vb_detection; + bool activate_ingenic_overcurrent_detection; bool ipg_isoc_en; u16 max_packet_count; u32 max_transfer_size; diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 1306f4e..fdb8a42f 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -73,6 +73,47 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg) p->power_down = DWC2_POWER_DOWN_PARAM_NONE; } +static void dwc2_set_jz4775_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->phy_utmi_width = 16; + p->activate_ingenic_overcurrent_detection = + !device_property_read_bool(hsotg->dev, "disable-over-current"); +} + +static void dwc2_set_x1600_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->host_channels = 16; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->phy_utmi_width = 16; + p->activate_ingenic_overcurrent_detection = + !device_property_read_bool(hsotg->dev, "disable-over-current"); +} + +static void dwc2_set_x2000_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->host_rx_fifo_size = 1024; + p->host_nperio_tx_fifo_size = 1024; + p->host_perio_tx_fifo_size = 1024; + p->host_channels = 16; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->phy_utmi_width = 16; + p->activate_ingenic_overcurrent_detection = + !device_property_read_bool(hsotg->dev, "disable-over-current"); +} + static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; @@ -221,7 +262,14 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg) const struct of_device_id dwc2_of_match_table[] = { { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params }, - { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, + { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, + { .compatible = "ingenic,jz4775-otg", .data = dwc2_set_jz4775_params }, + { .compatible = "ingenic,jz4780-otg", .data = dwc2_set_jz4775_params }, + { .compatible = "ingenic,x1000-otg", .data = dwc2_set_jz4775_params }, + { .compatible = "ingenic,x1600-otg", .data = dwc2_set_x1600_params }, + { .compatible = "ingenic,x1700-otg", .data = dwc2_set_x1600_params }, + { .compatible = "ingenic,x1830-otg", .data = dwc2_set_x1600_params }, + { .compatible = "ingenic,x2000-otg", .data = dwc2_set_x2000_params }, { .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params }, { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params }, { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params }, -- 2.7.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v3 3/3] MIPS: Ingenic: Refresh USB nodes to match driver changes. 2022-04-14 19:25 [PATCH v3 0/3] Add OTG support for Ingenic SoCs 周琰杰 (Zhou Yanjie) 2022-04-14 19:25 ` [PATCH v3 1/3] dt-bindings: dwc2: Add bindings for new " 周琰杰 (Zhou Yanjie) 2022-04-14 19:25 ` [PATCH v3 2/3] USB: dwc2: Add OTG support for " 周琰杰 (Zhou Yanjie) @ 2022-04-14 19:25 ` 周琰杰 (Zhou Yanjie) 2022-04-15 15:07 ` Paul Cercueil 2 siblings, 1 reply; 9+ messages in thread From: 周琰杰 (Zhou Yanjie) @ 2022-04-14 19:25 UTC (permalink / raw) To: gregkh, hminas, robh+dt, krzk+dt, tsbogend, paul Cc: linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi files. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> --- Notes: v3: New patch. arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +- arch/mips/boot/dts/ingenic/x1000.dtsi | 2 +- arch/mips/boot/dts/ingenic/x1830.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi index b998301..c182a65 100644 --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi @@ -577,7 +577,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,jz4780-otg", "snps,dwc2"; + compatible = "ingenic,jz4780-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi index 8bd27ede..343818a2 100644 --- a/arch/mips/boot/dts/ingenic/x1000.dtsi +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi @@ -366,7 +366,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,x1000-otg", "snps,dwc2"; + compatible = "ingenic,x1000-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi index 2595df8..6aff19f 100644 --- a/arch/mips/boot/dts/ingenic/x1830.dtsi +++ b/arch/mips/boot/dts/ingenic/x1830.dtsi @@ -355,7 +355,7 @@ }; otg: usb@13500000 { - compatible = "ingenic,x1830-otg", "snps,dwc2"; + compatible = "ingenic,x1830-otg"; reg = <0x13500000 0x40000>; interrupt-parent = <&intc>; -- 2.7.4 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v3 3/3] MIPS: Ingenic: Refresh USB nodes to match driver changes. 2022-04-14 19:25 ` [PATCH v3 3/3] MIPS: Ingenic: Refresh USB nodes to match driver changes 周琰杰 (Zhou Yanjie) @ 2022-04-15 15:07 ` Paul Cercueil 2022-04-16 12:16 ` Zhou Yanjie 0 siblings, 1 reply; 9+ messages in thread From: Paul Cercueil @ 2022-04-15 15:07 UTC (permalink / raw) To: 周琰杰 Cc: gregkh, hminas, robh+dt, krzk+dt, tsbogend, linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu Hi Zhou, Le ven., avril 15 2022 at 03:25:37 +0800, 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> a écrit : > Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi > files. > > Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> > --- > > Notes: > v3: > New patch. > > arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +- > arch/mips/boot/dts/ingenic/x1000.dtsi | 2 +- > arch/mips/boot/dts/ingenic/x1830.dtsi | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi > b/arch/mips/boot/dts/ingenic/jz4780.dtsi > index b998301..c182a65 100644 > --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi > +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi > @@ -577,7 +577,7 @@ > }; > > otg: usb@13500000 { > - compatible = "ingenic,jz4780-otg", "snps,dwc2"; > + compatible = "ingenic,jz4780-otg"; Could you refresh my memory - why are the "snps,dwc2" fallback strings removed? To me it seems like they should be here, since the OTG IP in Ingenic SoCs is derived from the DWC2 IP. Cheers, -Paul > reg = <0x13500000 0x40000>; > > interrupt-parent = <&intc>; > diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi > b/arch/mips/boot/dts/ingenic/x1000.dtsi > index 8bd27ede..343818a2 100644 > --- a/arch/mips/boot/dts/ingenic/x1000.dtsi > +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi > @@ -366,7 +366,7 @@ > }; > > otg: usb@13500000 { > - compatible = "ingenic,x1000-otg", "snps,dwc2"; > + compatible = "ingenic,x1000-otg"; > reg = <0x13500000 0x40000>; > > interrupt-parent = <&intc>; > diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi > b/arch/mips/boot/dts/ingenic/x1830.dtsi > index 2595df8..6aff19f 100644 > --- a/arch/mips/boot/dts/ingenic/x1830.dtsi > +++ b/arch/mips/boot/dts/ingenic/x1830.dtsi > @@ -355,7 +355,7 @@ > }; > > otg: usb@13500000 { > - compatible = "ingenic,x1830-otg", "snps,dwc2"; > + compatible = "ingenic,x1830-otg"; > reg = <0x13500000 0x40000>; > > interrupt-parent = <&intc>; > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 3/3] MIPS: Ingenic: Refresh USB nodes to match driver changes. 2022-04-15 15:07 ` Paul Cercueil @ 2022-04-16 12:16 ` Zhou Yanjie 2022-04-16 16:34 ` Paul Cercueil 0 siblings, 1 reply; 9+ messages in thread From: Zhou Yanjie @ 2022-04-16 12:16 UTC (permalink / raw) To: Paul Cercueil Cc: gregkh, hminas, robh+dt, krzk+dt, tsbogend, linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu Hi Paul, On 2022/4/15 下午11:07, Paul Cercueil wrote: > Hi Zhou, > > > Le ven., avril 15 2022 at 03:25:37 +0800, 周琰杰 (Zhou Yanjie) > <zhouyanjie@wanyeetech.com> a écrit : >> Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi files. >> >> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> >> --- >> >> Notes: >> v3: >> New patch. >> >> arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +- >> arch/mips/boot/dts/ingenic/x1000.dtsi | 2 +- >> arch/mips/boot/dts/ingenic/x1830.dtsi | 2 +- >> 3 files changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi >> b/arch/mips/boot/dts/ingenic/jz4780.dtsi >> index b998301..c182a65 100644 >> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi >> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi >> @@ -577,7 +577,7 @@ >> }; >> >> otg: usb@13500000 { >> - compatible = "ingenic,jz4780-otg", "snps,dwc2"; >> + compatible = "ingenic,jz4780-otg"; > > Could you refresh my memory - why are the "snps,dwc2" fallback strings > removed? > > To me it seems like they should be here, since the OTG IP in Ingenic > SoCs is derived from the DWC2 IP. The reason is that Nikolaus found that the current jz4780.dtsi will cause dtbscheck to complain. After discussion, Nikolaus concluded three feasible solutions, see here: https://lkml.org/lkml/2022/4/13/1097 And it seems that Krzysztof prefers the c) option. Thanks and best regards! > > Cheers, > -Paul > >> reg = <0x13500000 0x40000>; >> >> interrupt-parent = <&intc>; >> diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi >> b/arch/mips/boot/dts/ingenic/x1000.dtsi >> index 8bd27ede..343818a2 100644 >> --- a/arch/mips/boot/dts/ingenic/x1000.dtsi >> +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi >> @@ -366,7 +366,7 @@ >> }; >> >> otg: usb@13500000 { >> - compatible = "ingenic,x1000-otg", "snps,dwc2"; >> + compatible = "ingenic,x1000-otg"; >> reg = <0x13500000 0x40000>; >> >> interrupt-parent = <&intc>; >> diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi >> b/arch/mips/boot/dts/ingenic/x1830.dtsi >> index 2595df8..6aff19f 100644 >> --- a/arch/mips/boot/dts/ingenic/x1830.dtsi >> +++ b/arch/mips/boot/dts/ingenic/x1830.dtsi >> @@ -355,7 +355,7 @@ >> }; >> >> otg: usb@13500000 { >> - compatible = "ingenic,x1830-otg", "snps,dwc2"; >> + compatible = "ingenic,x1830-otg"; >> reg = <0x13500000 0x40000>; >> >> interrupt-parent = <&intc>; >> -- >> 2.7.4 >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 3/3] MIPS: Ingenic: Refresh USB nodes to match driver changes. 2022-04-16 12:16 ` Zhou Yanjie @ 2022-04-16 16:34 ` Paul Cercueil 0 siblings, 0 replies; 9+ messages in thread From: Paul Cercueil @ 2022-04-16 16:34 UTC (permalink / raw) To: Zhou Yanjie Cc: gregkh, hminas, robh+dt, krzk+dt, tsbogend, linux-usb, linux-mips, linux-kernel, devicetree, dragancecavac, hns, dongsheng.qiu, aric.pzqi, rick.tyliu, sernia.zhou, zhenwenjin, reimu Hi Zhou, Le sam., avril 16 2022 at 20:16:33 +0800, Zhou Yanjie <zhouyanjie@wanyeetech.com> a écrit : > Hi Paul, > > On 2022/4/15 下午11:07, Paul Cercueil wrote: >> Hi Zhou, >> >> >> Le ven., avril 15 2022 at 03:25:37 +0800, 周琰杰 (Zhou Yanjie) >> \x7f<zhouyanjie@wanyeetech.com> a écrit : >>> Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi >>> files. >>> >>> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> >>> --- >>> >>> Notes: >>> v3: >>> New patch. >>> >>> arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +- >>> arch/mips/boot/dts/ingenic/x1000.dtsi | 2 +- >>> arch/mips/boot/dts/ingenic/x1830.dtsi | 2 +- >>> 3 files changed, 3 insertions(+), 3 deletions(-) >>> >>> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi >>> \x7f\x7fb/arch/mips/boot/dts/ingenic/jz4780.dtsi >>> index b998301..c182a65 100644 >>> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi >>> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi >>> @@ -577,7 +577,7 @@ >>> }; >>> >>> otg: usb@13500000 { >>> - compatible = "ingenic,jz4780-otg", "snps,dwc2"; >>> + compatible = "ingenic,jz4780-otg"; >> >> Could you refresh my memory - why are the "snps,dwc2" fallback >> strings \x7fremoved? >> >> To me it seems like they should be here, since the OTG IP in Ingenic >> \x7fSoCs is derived from the DWC2 IP. > > > The reason is that Nikolaus found that the current jz4780.dtsi will > cause > dtbscheck to complain. After discussion, Nikolaus concluded three > feasible > solutions, see here: > https://lkml.org/lkml/2022/4/13/1097 > > And it seems that Krzysztof prefers the c) option. Understood. -Paul > > Thanks and best regards! > > >> >> Cheers, >> -Paul >> >>> reg = <0x13500000 0x40000>; >>> >>> interrupt-parent = <&intc>; >>> diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi >>> \x7f\x7fb/arch/mips/boot/dts/ingenic/x1000.dtsi >>> index 8bd27ede..343818a2 100644 >>> --- a/arch/mips/boot/dts/ingenic/x1000.dtsi >>> +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi >>> @@ -366,7 +366,7 @@ >>> }; >>> >>> otg: usb@13500000 { >>> - compatible = "ingenic,x1000-otg", "snps,dwc2"; >>> + compatible = "ingenic,x1000-otg"; >>> reg = <0x13500000 0x40000>; >>> >>> interrupt-parent = <&intc>; >>> diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi >>> \x7f\x7fb/arch/mips/boot/dts/ingenic/x1830.dtsi >>> index 2595df8..6aff19f 100644 >>> --- a/arch/mips/boot/dts/ingenic/x1830.dtsi >>> +++ b/arch/mips/boot/dts/ingenic/x1830.dtsi >>> @@ -355,7 +355,7 @@ >>> }; >>> >>> otg: usb@13500000 { >>> - compatible = "ingenic,x1830-otg", "snps,dwc2"; >>> + compatible = "ingenic,x1830-otg"; >>> reg = <0x13500000 0x40000>; >>> >>> interrupt-parent = <&intc>; >>> -- >>> 2.7.4 >>> >> ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-04-17 9:27 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-04-14 19:25 [PATCH v3 0/3] Add OTG support for Ingenic SoCs 周琰杰 (Zhou Yanjie) 2022-04-14 19:25 ` [PATCH v3 1/3] dt-bindings: dwc2: Add bindings for new " 周琰杰 (Zhou Yanjie) 2022-04-16 16:34 ` Paul Cercueil 2022-04-17 9:27 ` Zhou Yanjie 2022-04-14 19:25 ` [PATCH v3 2/3] USB: dwc2: Add OTG support for " 周琰杰 (Zhou Yanjie) 2022-04-14 19:25 ` [PATCH v3 3/3] MIPS: Ingenic: Refresh USB nodes to match driver changes 周琰杰 (Zhou Yanjie) 2022-04-15 15:07 ` Paul Cercueil 2022-04-16 12:16 ` Zhou Yanjie 2022-04-16 16:34 ` Paul Cercueil
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.