[PATCH for-review/for-rc/for-rc] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[PATCH for-review/for-rc/for-rc] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[Krishnamraju Eraparaju]

Warnings like below can fill up the dmesg while disconnecting RDMA
connections.
Hence, removing the unwanted WARN_ON.

[72103.557612] WARNING: CPU: 6 PID: 0 at
drivers/infiniband/sw/siw/siw_cm.c:1229 siw_cm_llp_data_ready+0xc1/0xd0
[siw]
[72103.557677] RIP: 0010:siw_cm_llp_data_ready+0xc1/0xd0 [siw]
[72103.557693] Call Trace:
[72103.557711]  tcp_data_queue+0x226/0xb40
[72103.557714]  tcp_rcv_established+0x220/0x620
[72103.557720]  tcp_v4_do_rcv+0x12a/0x1e0
[72103.557722]  tcp_v4_rcv+0xb05/0xc00
[72103.557728]  ip_local_deliver_finish+0x69/0x210
[72103.557730]  ip_local_deliver+0x6b/0xe0
[72103.557735]  ip_rcv+0x273/0x362
[72103.557740]  __netif_receive_skb_core+0xb35/0xc30
[72103.557752]  netif_receive_skb_internal+0x3d/0xb0
[72103.557754]  napi_gro_frags+0x13b/0x200
[72103.557788]  t4_ethrx_handler+0x433/0x7d0 [cxgb4]
[72103.557800]  process_responses+0x318/0x580 [cxgb4]
[72103.557820]  napi_rx_handler+0x14/0x100 [cxgb4]
[72103.557822]  net_rx_action+0x149/0x3b0
[72103.557826]  __do_softirq+0xe3/0x30a
[72103.557831]  irq_exit+0x100/0x110
[72103.557834]  do_IRQ+0x7f/0xe0
[72103.557837]  common_interrupt+0xf/0xf

Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
---
 drivers/infiniband/sw/siw/siw_cm.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/infiniband/sw/siw/siw_cm.c b/drivers/infiniband/sw/siw/siw_cm.c
index 3bccfef40e7e..bcbc54998ace 100644
--- a/drivers/infiniband/sw/siw/siw_cm.c
+++ b/drivers/infiniband/sw/siw/siw_cm.c
@@ -1226,7 +1226,6 @@ static void siw_cm_llp_data_ready(struct sock *sk)
 
 	cep = sk_to_cep(sk);
 	if (!cep) {
-		WARN_ON(1);
 		goto out;
 	}
 	siw_dbg_cep(cep, "state: %d\n", cep->state);
-- 
2.23.0.rc0

Re: [PATCH for-review/for-rc/for-rc] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[Krishnamraju Eraparaju]

On Friday, February 02/07/20, 2020 at 17:22:09 +0530, Krishnamraju Eraparaju wrote:
> Warnings like below can fill up the dmesg while disconnecting RDMA
> connections.
> Hence, removing the unwanted WARN_ON.
> 
> [72103.557612] WARNING: CPU: 6 PID: 0 at
> drivers/infiniband/sw/siw/siw_cm.c:1229 siw_cm_llp_data_ready+0xc1/0xd0
> [siw]
> [72103.557677] RIP: 0010:siw_cm_llp_data_ready+0xc1/0xd0 [siw]
> [72103.557693] Call Trace:
> [72103.557711]  tcp_data_queue+0x226/0xb40
> [72103.557714]  tcp_rcv_established+0x220/0x620
> [72103.557720]  tcp_v4_do_rcv+0x12a/0x1e0
> [72103.557722]  tcp_v4_rcv+0xb05/0xc00
> [72103.557728]  ip_local_deliver_finish+0x69/0x210
> [72103.557730]  ip_local_deliver+0x6b/0xe0
> [72103.557735]  ip_rcv+0x273/0x362
> [72103.557740]  __netif_receive_skb_core+0xb35/0xc30
> [72103.557752]  netif_receive_skb_internal+0x3d/0xb0
> [72103.557754]  napi_gro_frags+0x13b/0x200
> [72103.557788]  t4_ethrx_handler+0x433/0x7d0 [cxgb4]
> [72103.557800]  process_responses+0x318/0x580 [cxgb4]
> [72103.557820]  napi_rx_handler+0x14/0x100 [cxgb4]
> [72103.557822]  net_rx_action+0x149/0x3b0
> [72103.557826]  __do_softirq+0xe3/0x30a
> [72103.557831]  irq_exit+0x100/0x110
> [72103.557834]  do_IRQ+0x7f/0xe0
> [72103.557837]  common_interrupt+0xf/0xf
> 
> Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
> ---
>  drivers/infiniband/sw/siw/siw_cm.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/infiniband/sw/siw/siw_cm.c b/drivers/infiniband/sw/siw/siw_cm.c
> index 3bccfef40e7e..bcbc54998ace 100644
> --- a/drivers/infiniband/sw/siw/siw_cm.c
> +++ b/drivers/infiniband/sw/siw/siw_cm.c
> @@ -1226,7 +1226,6 @@ static void siw_cm_llp_data_ready(struct sock *sk)
>  
>  	cep = sk_to_cep(sk);
>  	if (!cep) {
> -		WARN_ON(1);
>  		goto out;
>  	}
>  	siw_dbg_cep(cep, "state: %d\n", cep->state);
> -- 
> 2.23.0.rc0
> 

Please ignore this patch as I mistakenly put "for-review/for-rc/for-rc"
in the subject line instead of "for-rc".

Re: [PATCH for-review/for-rc/for-rc] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[Jason Gunthorpe]

On Fri, Feb 07, 2020 at 05:22:09PM +0530, Krishnamraju Eraparaju wrote:
> Warnings like below can fill up the dmesg while disconnecting RDMA
> connections.
> Hence, removing the unwanted WARN_ON.

Please explain why it the code is correct to take this error
path. Bernard clearly thought this shouldn't be happening

Jason

Re: [PATCH for-review/for-rc/for-rc] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[Krishnamraju Eraparaju]

On Friday, February 02/07/20, 2020 at 10:18:20 -0400, Jason Gunthorpe wrote:
> On Fri, Feb 07, 2020 at 05:22:09PM +0530, Krishnamraju Eraparaju wrote:
> > Warnings like below can fill up the dmesg while disconnecting RDMA
> > connections.
> > Hence, removing the unwanted WARN_ON.
> 
> Please explain why it the code is correct to take this error
> path. Bernard clearly thought this shouldn't be happening
> 
> Jason
As part of iSER multipath testcase, target(iw_cxgb4) responds with MPA reject
to initiator(SIW) when iw_cxgb4 resources gets exhaused(expected as per
testcase), then SIW performs the connection teardown and dissociates
'cep' from tcp socket 'sk'. And if any "data_ready" notifications from
TCP stack after this connection teardown will hit WARN_ON() in
siw_cm_llp_data_ready().

Bernard, is this WARN_ON() useful to identify any error conditions?

Thanks,
Krishna.

RE: [PATCH for-review/for-rc/for-rc] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[Bernard Metzler]

-----"Krishnamraju Eraparaju" <krishna2@chelsio.com> wrote: -----

>To: "Jason Gunthorpe" <jgg@mellanox.com>
>From: "Krishnamraju Eraparaju" <krishna2@chelsio.com>
>Date: 02/10/2020 07:00PM
>Cc: dledford@redhat.com, bmt@zurich.ibm.com,
>linux-rdma@vger.kernel.org, bharat@chelsio.com, nirranjan@chelsio.com
>Subject: [EXTERNAL] Re: [PATCH for-review/for-rc/for-rc] RDMA/siw:
>Remove unwanted WARN_ON in siw_cm_llp_data_ready()
>
>On Friday, February 02/07/20, 2020 at 10:18:20 -0400, Jason Gunthorpe
>wrote:
>> On Fri, Feb 07, 2020 at 05:22:09PM +0530, Krishnamraju Eraparaju
>wrote:
>> > Warnings like below can fill up the dmesg while disconnecting
>RDMA
>> > connections.
>> > Hence, removing the unwanted WARN_ON.
>> 
>> Please explain why it the code is correct to take this error
>> path. Bernard clearly thought this shouldn't be happening
>> 
>> Jason
>As part of iSER multipath testcase, target(iw_cxgb4) responds with
>MPA reject
>to initiator(SIW) when iw_cxgb4 resources gets exhaused(expected as
>per
>testcase), then SIW performs the connection teardown and dissociates
>'cep' from tcp socket 'sk'. And if any "data_ready" notifications
>from
>TCP stack after this connection teardown will hit WARN_ON() in
>siw_cm_llp_data_ready().
>
>Bernard, is this WARN_ON() useful to identify any error conditions?
>

Let me try recreating the issue. I'll come back asap.

Thanks
Bernard.

RE: [PATCH for-review/for-rc/for-rc] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[Bernard Metzler]

-----"Krishnamraju Eraparaju" <krishna2@chelsio.com> wrote: -----

>To: "Jason Gunthorpe" <jgg@mellanox.com>
>From: "Krishnamraju Eraparaju" <krishna2@chelsio.com>
>Date: 02/10/2020 07:00PM
>Cc: dledford@redhat.com, bmt@zurich.ibm.com,
>linux-rdma@vger.kernel.org, bharat@chelsio.com, nirranjan@chelsio.com
>Subject: [EXTERNAL] Re: [PATCH for-review/for-rc/for-rc] RDMA/siw:
>Remove unwanted WARN_ON in siw_cm_llp_data_ready()
>
>On Friday, February 02/07/20, 2020 at 10:18:20 -0400, Jason Gunthorpe
>wrote:
>> On Fri, Feb 07, 2020 at 05:22:09PM +0530, Krishnamraju Eraparaju
>wrote:
>> > Warnings like below can fill up the dmesg while disconnecting
>RDMA
>> > connections.
>> > Hence, removing the unwanted WARN_ON.
>> 
>> Please explain why it the code is correct to take this error
>> path. Bernard clearly thought this shouldn't be happening
>> 
>> Jason
>As part of iSER multipath testcase, target(iw_cxgb4) responds with
>MPA reject
>to initiator(SIW) when iw_cxgb4 resources gets exhaused(expected as
>per
>testcase), then SIW performs the connection teardown and dissociates
>'cep' from tcp socket 'sk'. And if any "data_ready" notifications
>from
>TCP stack after this connection teardown will hit WARN_ON() in
>siw_cm_llp_data_ready().
>
>Bernard, is this WARN_ON() useful to identify any error conditions?
>
So, this WARN_ON() is wrong. It can very well happen that the socket
already got disassociated from siw, but a sockets data_ready() upcall
races with the disassociation procedure. Since we hold the
sk_callback_lock while setting or testing sk->sk_user_data,
a NULL pointer tells us this socket just got disassociated
from siw and we can bail out.
Thanks Krishna for finding that out. Your patch is correct.

Bernard.

Re: Re: [PATCH for-review/for-rc/for-rc] RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()

[Bernard Metzler]

-----"Jason Gunthorpe" <jgg@mellanox.com> wrote: -----

>To: "Krishnamraju Eraparaju" <krishna2@chelsio.com>
>From: "Jason Gunthorpe" <jgg@mellanox.com>
>Date: 02/07/2020 03:18PM
>Cc: dledford@redhat.com, bmt@zurich.ibm.com,
>linux-rdma@vger.kernel.org, bharat@chelsio.com, nirranjan@chelsio.com
>Subject: [EXTERNAL] Re: [PATCH for-review/for-rc/for-rc] RDMA/siw:
>Remove unwanted WARN_ON in siw_cm_llp_data_ready()
>
>On Fri, Feb 07, 2020 at 05:22:09PM +0530, Krishnamraju Eraparaju
>wrote:
>> Warnings like below can fill up the dmesg while disconnecting RDMA
>> connections.
>> Hence, removing the unwanted WARN_ON.
>
>Please explain why it the code is correct to take this error
>path. Bernard clearly thought this shouldn't be happening
>
>Jason
>
>
I have to look into it as well. It's maybe on me revising my
thoughts.

Thanks,
Bernard.