* [U-Boot] Marvell Switch // U-Boot
@ 2016-04-29 12:16 Hannes Schmelzer
0 siblings, 0 replies; only message in thread
From: Hannes Schmelzer @ 2016-04-29 12:16 UTC (permalink / raw)
To: u-boot
Hi Prafulla,
i've just received the new i.mx6 board from our hardware-development team
and i'm going to start board bringup.
One of the next things is to bring up ethernet.
I have a 88E6321 switch soldered down on the board, connected through
rgmii.
A quick look into u-boot's tree showed me that there are a few marvell
switches supported but not exactly this one.
Do you know if one of the supported ones (88e61xx and 88e6352) is
compatible with the 88e6321 ?
If not, is marvell planning to provide some support for the 6321 in
future? or have i to build the support by my own?
many thanks and best regards,
Hannes
_____________________________________________
Hannes Schmelzer
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H.
B&R Stra?e 1
5142 Eggelsberg
Austria
Tel: +43 7748 6586 - 1612
Fax: +43 7748 6586 - 26
Email: hannes.schmelzer at br-automation.com
http://www.br-automation.com
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-04-29 12:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-29 12:16 [U-Boot] Marvell Switch // U-Boot Hannes Schmelzer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.