* evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' @ 2021-02-04 12:27 VINOTHKUMAR RK 2021-02-05 2:27 ` Troy Lee 0 siblings, 1 reply; 12+ messages in thread From: VINOTHKUMAR RK @ 2021-02-04 12:27 UTC (permalink / raw) To: openbmc [-- Attachment #1: Type: text/plain, Size: 4045 bytes --] Hi, I'm trying to build for evb-ast2600 platform, but it doesn't succeed. Please help. Build command: (fresh checkout and build) TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env bitbake obmc-phosphor-image Branch details: commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f Error Log: Loading cache: 100% | | ETA: --:--:-- Loaded 0 entries from dependency cache. Parsing recipes: 100% |########################################################################################################################################################################| Time: 0:00:44 Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 targets, 362 skipped, 0 masked, 0 errors. WARNING: No bb files in default matched BBFILE_PATTERN_meta-evb-ast2600 '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.49.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "ubuntu-20.04" TARGET_SYS = "arm-openbmc-linux-gnueabi" MACHINE = "evb-ast2600" DISTRO = "openbmc-phosphor" DISTRO_VERSION = "0.1.0" TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" TARGET_FPU = "hard" meta meta-poky meta-oe meta-networking meta-python meta-phosphor meta-aspeed meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" Initialising tasks: 100% |#####################################################################################################################################################################| Time: 0:00:03 Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, 0% complete) NOTE: Executing Tasks WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' is too large! ERROR: Logfile of failure stored in: /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 ERROR: Task (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) failed with exit code '1' NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to be rerun and 1 failed. Summary: 1 task failed: /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb: do_generate_static Summary: There were 10 WARNING messages shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Regards, VINOTHKUMAR RK [-- Attachment #2: Type: text/html, Size: 4969 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-02-04 12:27 evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' VINOTHKUMAR RK @ 2021-02-05 2:27 ` Troy Lee 2021-02-05 4:19 ` VINOTHKUMAR RK 2021-03-08 5:52 ` Thang Nguyen 0 siblings, 2 replies; 12+ messages in thread From: Troy Lee @ 2021-02-05 2:27 UTC (permalink / raw) To: VINOTHKUMAR RK, openbmc [-- Attachment #1: Type: text/plain, Size: 4738 bytes --] Hi Vinothkumar, Please refer to the following two changes in Gerrit: * https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 * https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 Thanks, Troy Lee From: openbmc <openbmc-bounces+troy_lee=aspeedtech.com@lists.ozlabs.org> On Behalf Of VINOTHKUMAR RK Sent: Thursday, February 4, 2021 8:28 PM To: openbmc@lists.ozlabs.org Subject: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi, I'm trying to build for evb-ast2600 platform, but it doesn't succeed. Please help. Build command: (fresh checkout and build) TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env bitbake obmc-phosphor-image Branch details: commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f Error Log: Loading cache: 100% | | ETA: --:--:-- Loaded 0 entries from dependency cache. Parsing recipes: 100% |########################################################################################################################################################################| Time: 0:00:44 Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 targets, 362 skipped, 0 masked, 0 errors. WARNING: No bb files in default matched BBFILE_PATTERN_meta-evb-ast2600 '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.49.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "ubuntu-20.04" TARGET_SYS = "arm-openbmc-linux-gnueabi" MACHINE = "evb-ast2600" DISTRO = "openbmc-phosphor" DISTRO_VERSION = "0.1.0" TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" TARGET_FPU = "hard" meta meta-poky meta-oe meta-networking meta-python meta-phosphor meta-aspeed meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" Initialising tasks: 100% |#####################################################################################################################################################################| Time: 0:00:03 Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, 0% complete) NOTE: Executing Tasks WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' is too large! ERROR: Logfile of failure stored in: /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 ERROR: Task (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) failed with exit code '1' NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to be rerun and 1 failed. Summary: 1 task failed: /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static Summary: There were 10 WARNING messages shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Regards, VINOTHKUMAR RK [-- Attachment #2: Type: text/html, Size: 11745 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-02-05 2:27 ` Troy Lee @ 2021-02-05 4:19 ` VINOTHKUMAR RK 2021-02-05 7:29 ` Troy Lee 2021-03-08 5:52 ` Thang Nguyen 1 sibling, 1 reply; 12+ messages in thread From: VINOTHKUMAR RK @ 2021-02-05 4:19 UTC (permalink / raw) To: Troy Lee; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 8569 bytes --] Hi Troy, Thanks for sharing the changes, with this I'm able to generate mtd image. But when I try to load them through Qemu, it's getting stuck with the below error. Is there any workaround? Error log: ------------ fdt_root: FDT_ERR_BADMAGIC ERROR: root node setup failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### Qemu command: ----------------------- qemu-system-arm -m 1G -M ast2600-evb -nographic -drive file=obmc-phosphor-image-evb-ast2600-20210205034901.static.mtd,format=raw,if=mtd -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443 -:443,hostname=qemu Qemu log: -------------- U-Boot 2019.04 (Feb 04 2021 - 10:27:21 +0000) SOC: AST2600-A0 eSPI Mode: SIO:Enable : SuperIO-2e Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII Model: AST2600 EVB DRAM: already initialized, 240 MiB (capacity:256 MiB, VGA:64 MiB), ECC off PCIE-0: Link down MMC: sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 Loading Environment from SPI Flash... *** Warning - spi_flash_probe_bus_cs() failed, using default environment In: serial@1e784000 Out: serial@1e784000 Err: serial@1e784000 Model: AST2600 EVB Net: Warning: ftgmac@1e660000 (eth0) using random MAC address - 5e:23:16:3b:07:db eth0: ftgmac@1e660000 Warning: ftgmac@1e680000 (eth1) using random MAC address - 92:2d:b9:4b:a5:93 , eth1: ftgmac@1e680000 Warning: ftgmac@1e670000 (eth2) using random MAC address - f6:16:60:c6:0a:2d , eth2: ftgmac@1e670000 Warning: ftgmac@1e690000 (eth3) using random MAC address - 02:43:32:16:41:6d , eth3: ftgmac@1e690000 Hit any key to stop autoboot: 0 ## Loading kernel from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'kernel@1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x2010012c Data Size: 3527112 Bytes = 3.4 MiB Architecture: ARM OS: Linux Load Address: 0x80001000 Entry Point: 0x80001000 Hash algo: sha256 Hash value: d3bfde4459bab8272cda12f0747d47735521c9ee4f5786283cfea439398c976d Verifying Hash Integrity ... sha256+ OK ## Loading ramdisk from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'ramdisk@1' ramdisk subimage Description: obmc-phosphor-initramfs Type: RAMDisk Image Compression: uncompressed Data Start: 0x20465cf8 Data Size: 1087608 Bytes = 1 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha256 Hash value: 488f44eb0c954ef85ede0c1dde3803696b3637d41996fc2be9610bbdb756b1a9 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'fdt@aspeed-ast2600-evb.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x2045d408 Data Size: 34852 Bytes = 34 KiB Architecture: ARM Hash algo: sha256 Hash value: a9bcf2a34ea7477d2c5f86ec793b659ecce07554dee5897460198f513ede4d0b Verifying Hash Integrity ... sha256+ OK Booting using the fdt blob at 0x2045d408 Loading Kernel Image ... OK Loading Ramdisk to 8ce57000, end 8cf60878 ... OK Loading Device Tree to 8ce4b000, end 8ce56823 ... OK fdt_root: FDT_ERR_BADMAGIC ERROR: root node setup failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 07:57, Troy Lee <troy_lee@aspeedtech.com> wrote: > Hi Vinothkumar, > > > > Please refer to the following two changes in Gerrit: > > - https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 > - https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 > > > > Thanks, > > Troy Lee > > > > *From:* openbmc <openbmc-bounces+troy_lee=aspeedtech.com@lists.ozlabs.org> > *On Behalf Of *VINOTHKUMAR RK > *Sent:* Thursday, February 4, 2021 8:28 PM > *To:* openbmc@lists.ozlabs.org > *Subject:* evb-ast2600: Getting some build errors - 'u-boot.bin' is too > large!' > > > > Hi, > > > > I'm trying to build for evb-ast2600 platform, but it doesn't succeed. > Please help. > > > > Build command: (fresh checkout and build) > > TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env > bitbake obmc-phosphor-image > > > > Branch details: > > commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f > > > > > > Error Log: > > Loading cache: 100% | > > | ETA: --:--:-- > Loaded 0 entries from dependency cache. > Parsing recipes: 100% > |########################################################################################################################################################################| > Time: 0:00:44 > Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 targets, > 362 skipped, 0 masked, 0 errors. > WARNING: No bb files in default matched BBFILE_PATTERN_meta-evb-ast2600 > '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' > NOTE: Resolving any missing task queue dependencies > > Build Configuration: > BB_VERSION = "1.49.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "ubuntu-20.04" > TARGET_SYS = "arm-openbmc-linux-gnueabi" > MACHINE = "evb-ast2600" > DISTRO = "openbmc-phosphor" > DISTRO_VERSION = "0.1.0" > TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" > TARGET_FPU = "hard" > meta > meta-poky > meta-oe > meta-networking > meta-python > meta-phosphor > meta-aspeed > meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" > > Initialising tasks: 100% > |#####################################################################################################################################################################| > Time: 0:00:03 > Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, 0% > complete) > NOTE: Executing Tasks > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > Feature 'phosphor-gpio-keys' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY > is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > Feature 'phosphor-gpio-keys' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY > is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: > obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] > ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image > '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' > is too large! > ERROR: Logfile of failure stored in: > /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 > ERROR: Task > (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) > failed with exit code '1' > NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to be > rerun and 1 failed. > > Summary: 1 task failed: > > /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb: > do_generate_static > Summary: There were 10 WARNING messages shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > > > > > Regards, > > VINOTHKUMAR RK > [-- Attachment #2: Type: text/html, Size: 13092 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-02-05 4:19 ` VINOTHKUMAR RK @ 2021-02-05 7:29 ` Troy Lee 2021-02-05 8:15 ` VINOTHKUMAR RK 0 siblings, 1 reply; 12+ messages in thread From: Troy Lee @ 2021-02-05 7:29 UTC (permalink / raw) To: VINOTHKUMAR RK; +Cc: openbmc Hi Vinothkumar, I’m not sure what’s wrong. Beware that the QEMU will directly write into your image file, so you might want to running it on a copy or use -snapshot option. I could boot into OS with the following qemu command: qemu-system-arm -M ast2600-evb -drive file=image-bmc,format=raw,if=mtd -nographic -nic user My QEMU version: qemu-system-arm --version QEMU emulator version 5.2.50 (v5.2.0-991-g45240eed4f) Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers Thanks, Troy Lee From: VINOTHKUMAR RK <vkrk.user@gmail.com> Sent: Friday, February 5, 2021 12:19 PM To: Troy Lee <troy_lee@aspeedtech.com> Cc: openbmc@lists.ozlabs.org Subject: Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi Troy, Thanks for sharing the changes, with this I'm able to generate mtd image. But when I try to load them through Qemu, it's getting stuck with the below error. Is there any workaround? Error log: ------------ fdt_root: FDT_ERR_BADMAGIC ERROR: root node setup failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### Qemu command: ----------------------- qemu-system-arm -m 1G -M ast2600-evb -nographic -drive file=obmc-phosphor-image-evb-ast2600-20210205034901.static.mtd,format=raw,if=mtd -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443,hostname=qemu Qemu log: -------------- U-Boot 2019.04 (Feb 04 2021 - 10:27:21 +0000) SOC: AST2600-A0 eSPI Mode: SIO:Enable : SuperIO-2e Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII Model: AST2600 EVB DRAM: already initialized, 240 MiB (capacity:256 MiB, VGA:64 MiB), ECC off PCIE-0: Link down MMC: sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 Loading Environment from SPI Flash... *** Warning - spi_flash_probe_bus_cs() failed, using default environment In: serial@1e784000 Out: serial@1e784000 Err: serial@1e784000 Model: AST2600 EVB Net: Warning: ftgmac@1e660000 (eth0) using random MAC address - 5e:23:16:3b:07:db eth0: ftgmac@1e660000 Warning: ftgmac@1e680000 (eth1) using random MAC address - 92:2d:b9:4b:a5:93 , eth1: ftgmac@1e680000 Warning: ftgmac@1e670000 (eth2) using random MAC address - f6:16:60:c6:0a:2d , eth2: ftgmac@1e670000 Warning: ftgmac@1e690000 (eth3) using random MAC address - 02:43:32:16:41:6d , eth3: ftgmac@1e690000 Hit any key to stop autoboot: 0 ## Loading kernel from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'kernel@1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x2010012c Data Size: 3527112 Bytes = 3.4 MiB Architecture: ARM OS: Linux Load Address: 0x80001000 Entry Point: 0x80001000 Hash algo: sha256 Hash value: d3bfde4459bab8272cda12f0747d47735521c9ee4f5786283cfea439398c976d Verifying Hash Integrity ... sha256+ OK ## Loading ramdisk from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'ramdisk@1' ramdisk subimage Description: obmc-phosphor-initramfs Type: RAMDisk Image Compression: uncompressed Data Start: 0x20465cf8 Data Size: 1087608 Bytes = 1 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha256 Hash value: 488f44eb0c954ef85ede0c1dde3803696b3637d41996fc2be9610bbdb756b1a9 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'fdt@aspeed-ast2600-evb.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x2045d408 Data Size: 34852 Bytes = 34 KiB Architecture: ARM Hash algo: sha256 Hash value: a9bcf2a34ea7477d2c5f86ec793b659ecce07554dee5897460198f513ede4d0b Verifying Hash Integrity ... sha256+ OK Booting using the fdt blob at 0x2045d408 Loading Kernel Image ... OK Loading Ramdisk to 8ce57000, end 8cf60878 ... OK Loading Device Tree to 8ce4b000, end 8ce56823 ... OK fdt_root: FDT_ERR_BADMAGIC ERROR: root node setup failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 07:57, Troy Lee <mailto:troy_lee@aspeedtech.com> wrote: Hi Vinothkumar, Please refer to the following two changes in Gerrit: • https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 • https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 Thanks, Troy Lee From: openbmc <openbmc-bounces+troy_lee=mailto:aspeedtech.com@lists.ozlabs.org> On Behalf Of VINOTHKUMAR RK Sent: Thursday, February 4, 2021 8:28 PM To: mailto:openbmc@lists.ozlabs.org Subject: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi, I'm trying to build for evb-ast2600 platform, but it doesn't succeed. Please help. Build command: (fresh checkout and build) TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env bitbake obmc-phosphor-image Branch details: commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f Error Log: Loading cache: 100% | | ETA: --:--:-- Loaded 0 entries from dependency cache. Parsing recipes: 100% |########################################################################################################################################################################| Time: 0:00:44 Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 targets, 362 skipped, 0 masked, 0 errors. WARNING: No bb files in default matched BBFILE_PATTERN_meta-evb-ast2600 '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.49.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "ubuntu-20.04" TARGET_SYS = "arm-openbmc-linux-gnueabi" MACHINE = "evb-ast2600" DISTRO = "openbmc-phosphor" DISTRO_VERSION = "0.1.0" TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" TARGET_FPU = "hard" meta meta-poky meta-oe meta-networking meta-python meta-phosphor meta-aspeed meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" Initialising tasks: 100% |#####################################################################################################################################################################| Time: 0:00:03 Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, 0% complete) NOTE: Executing Tasks WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' is too large! ERROR: Logfile of failure stored in: /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 ERROR: Task (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) failed with exit code '1' NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to be rerun and 1 failed. Summary: 1 task failed: /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static Summary: There were 10 WARNING messages shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Regards, VINOTHKUMAR RK ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-02-05 7:29 ` Troy Lee @ 2021-02-05 8:15 ` VINOTHKUMAR RK 2021-02-05 9:28 ` Troy Lee 0 siblings, 1 reply; 12+ messages in thread From: VINOTHKUMAR RK @ 2021-02-05 8:15 UTC (permalink / raw) To: Troy Lee; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 10610 bytes --] Hi Troy, Thanks a lot for your input! Looks like there was some problem with my Qemu. I was using some older version "version 4.2.1 (Debian 1:4.2-3ubuntu6.11)". The image came up fine when I tried with the latest Qemu "aspeed-6.0" branch, it gives the image version which you're using. Output: --------- Phosphor OpenBMC (Phosphor OpenBMC Project Reference Distro) 0.1.0 evb-ast2600 ttyS4 evb-ast2600 login: root Password: root@evb-ast2600:~# BTW, is there an option with Qemu to boot u-boot and linux image separately? Also something like TFTP from u-boot (Qemu) to my VM (Ubuntu) where I'm running my TFTP server. Please let me know if there are any steps for the same. Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 12:59, Troy Lee <troy_lee@aspeedtech.com> wrote: > Hi Vinothkumar, > > I’m not sure what’s wrong. Beware that the QEMU will directly write into > your image file, so you might want to running it on a copy or use -snapshot > option. > > I could boot into OS with the following qemu command: > qemu-system-arm -M ast2600-evb -drive file=image-bmc,format=raw,if=mtd > -nographic -nic user > > My QEMU version: > qemu-system-arm --version > QEMU emulator version 5.2.50 (v5.2.0-991-g45240eed4f) > Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers > > Thanks, > Troy Lee > > From: VINOTHKUMAR RK <vkrk.user@gmail.com> > Sent: Friday, February 5, 2021 12:19 PM > To: Troy Lee <troy_lee@aspeedtech.com> > Cc: openbmc@lists.ozlabs.org > Subject: Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too > large!' > > Hi Troy, > > Thanks for sharing the changes, with this I'm able to generate mtd image. > But when I try to load them through Qemu, it's getting stuck with the below > error. Is there any workaround? > > Error log: > ------------ > fdt_root: FDT_ERR_BADMAGIC > ERROR: root node setup failed > - must RESET the board to recover. > > FDT creation failed! hanging...### ERROR ### Please RESET the board ### > > > Qemu command: > ----------------------- > qemu-system-arm -m 1G -M ast2600-evb -nographic -drive > file=obmc-phosphor-image-evb-ast2600-20210205034901.static.mtd,format=raw,if=mtd > -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443 > -:443,hostname=qemu > > Qemu log: > -------------- > U-Boot 2019.04 (Feb 04 2021 - 10:27:21 +0000) > > SOC: AST2600-A0 > eSPI Mode: SIO:Enable : SuperIO-2e > Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII > Model: AST2600 EVB > DRAM: already initialized, 240 MiB (capacity:256 MiB, VGA:64 MiB), ECC off > PCIE-0: Link down > MMC: > > sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 > Loading Environment from SPI Flash... *** Warning - > spi_flash_probe_bus_cs() failed, using default environment > > In: serial@1e784000 > Out: serial@1e784000 > Err: serial@1e784000 > Model: AST2600 EVB > Net: > Warning: ftgmac@1e660000 (eth0) using random MAC address - > 5e:23:16:3b:07:db > eth0: ftgmac@1e660000 > Warning: ftgmac@1e680000 (eth1) using random MAC address - > 92:2d:b9:4b:a5:93 > , eth1: ftgmac@1e680000 > Warning: ftgmac@1e670000 (eth2) using random MAC address - > f6:16:60:c6:0a:2d > , eth2: ftgmac@1e670000 > Warning: ftgmac@1e690000 (eth3) using random MAC address - > 02:43:32:16:41:6d > , eth3: ftgmac@1e690000 > Hit any key to stop autoboot: 0 > ## Loading kernel from FIT Image at 20100000 ... > Using 'conf@aspeed-ast2600-evb.dtb' configuration > Trying 'kernel@1' kernel subimage > Description: Linux kernel > Type: Kernel Image > Compression: uncompressed > Data Start: 0x2010012c > Data Size: 3527112 Bytes = 3.4 MiB > Architecture: ARM > OS: Linux > Load Address: 0x80001000 > Entry Point: 0x80001000 > Hash algo: sha256 > Hash value: > d3bfde4459bab8272cda12f0747d47735521c9ee4f5786283cfea439398c976d > Verifying Hash Integrity ... sha256+ OK > ## Loading ramdisk from FIT Image at 20100000 ... > Using 'conf@aspeed-ast2600-evb.dtb' configuration > Trying 'ramdisk@1' ramdisk subimage > Description: obmc-phosphor-initramfs > Type: RAMDisk Image > Compression: uncompressed > Data Start: 0x20465cf8 > Data Size: 1087608 Bytes = 1 MiB > Architecture: ARM > OS: Linux > Load Address: unavailable > Entry Point: unavailable > Hash algo: sha256 > Hash value: > 488f44eb0c954ef85ede0c1dde3803696b3637d41996fc2be9610bbdb756b1a9 > Verifying Hash Integrity ... sha256+ OK > ## Loading fdt from FIT Image at 20100000 ... > Using 'conf@aspeed-ast2600-evb.dtb' configuration > Trying 'fdt@aspeed-ast2600-evb.dtb' fdt subimage > Description: Flattened Device Tree blob > Type: Flat Device Tree > Compression: uncompressed > Data Start: 0x2045d408 > Data Size: 34852 Bytes = 34 KiB > Architecture: ARM > Hash algo: sha256 > Hash value: > a9bcf2a34ea7477d2c5f86ec793b659ecce07554dee5897460198f513ede4d0b > Verifying Hash Integrity ... sha256+ OK > Booting using the fdt blob at 0x2045d408 > Loading Kernel Image ... OK > Loading Ramdisk to 8ce57000, end 8cf60878 ... OK > Loading Device Tree to 8ce4b000, end 8ce56823 ... OK > fdt_root: FDT_ERR_BADMAGIC > ERROR: root node setup failed > - must RESET the board to recover. > > FDT creation failed! hanging...### ERROR ### Please RESET the board ### > > > > > > Regards, > Vinoth Kumar RK > > On Fri, 5 Feb 2021 at 07:57, Troy Lee <mailto:troy_lee@aspeedtech.com> > wrote: > Hi Vinothkumar, > > Please refer to the following two changes in Gerrit: > • https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 > • https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 > > Thanks, > Troy Lee > > From: openbmc <openbmc-bounces+troy_lee=mailto: > aspeedtech.com@lists.ozlabs.org> On Behalf Of VINOTHKUMAR RK > Sent: Thursday, February 4, 2021 8:28 PM > To: mailto:openbmc@lists.ozlabs.org > Subject: evb-ast2600: Getting some build errors - 'u-boot.bin' is too > large!' > > Hi, > > I'm trying to build for evb-ast2600 platform, but it doesn't succeed. > Please help. > > Build command: (fresh checkout and build) > TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env > bitbake obmc-phosphor-image > > Branch details: > commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f > > > Error Log: > Loading cache: 100% | > > | ETA: --:--:-- > Loaded 0 entries from dependency cache. > Parsing recipes: 100% > |########################################################################################################################################################################| > Time: 0:00:44 > Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 targets, > 362 skipped, 0 masked, 0 errors. > WARNING: No bb files in default matched BBFILE_PATTERN_meta-evb-ast2600 > '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' > NOTE: Resolving any missing task queue dependencies > > Build Configuration: > BB_VERSION = "1.49.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "ubuntu-20.04" > TARGET_SYS = "arm-openbmc-linux-gnueabi" > MACHINE = "evb-ast2600" > DISTRO = "openbmc-phosphor" > DISTRO_VERSION = "0.1.0" > TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" > TARGET_FPU = "hard" > meta > meta-poky > meta-oe > meta-networking > meta-python > meta-phosphor > meta-aspeed > meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" > > Initialising tasks: 100% > |#####################################################################################################################################################################| > Time: 0:00:03 > Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, 0% > complete) > NOTE: Executing Tasks > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > Feature 'phosphor-gpio-keys' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY > is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > Feature 'phosphor-gpio-keys' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY > is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: > obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] > ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image > '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' > is too large! > ERROR: Logfile of failure stored in: > /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 > ERROR: Task > (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) > failed with exit code '1' > NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to be > rerun and 1 failed. > > Summary: 1 task failed: > > /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb: > do_generate_static > Summary: There were 10 WARNING messages shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > Regards, > VINOTHKUMAR RK > [-- Attachment #2: Type: text/html, Size: 12960 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-02-05 8:15 ` VINOTHKUMAR RK @ 2021-02-05 9:28 ` Troy Lee 2021-02-15 11:45 ` VINOTHKUMAR RK 0 siblings, 1 reply; 12+ messages in thread From: Troy Lee @ 2021-02-05 9:28 UTC (permalink / raw) To: VINOTHKUMAR RK; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 11031 bytes --] Hi Vinothkumar, If you want to boot different Kernel from TFTP, I think you can use tftp command in u-boot. ast# dhcp ast# tftp 0x83000000 serverip:/path/image-kernel ast# bootm 0x83000000 If you want to use qemu options loading u-boot/kernel images to different memory offset, I’m not familiar with this. Need some expert’s help here. Thanks, Troy Lee From: VINOTHKUMAR RK <vkrk.user@gmail.com> Sent: Friday, February 5, 2021 4:16 PM To: Troy Lee <troy_lee@aspeedtech.com> Cc: openbmc@lists.ozlabs.org Subject: Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi Troy, Thanks a lot for your input! Looks like there was some problem with my Qemu. I was using some older version "version 4.2.1 (Debian 1:4.2-3ubuntu6.11)". The image came up fine when I tried with the latest Qemu "aspeed-6.0" branch, it gives the image version which you're using. Output: --------- Phosphor OpenBMC (Phosphor OpenBMC Project Reference Distro) 0.1.0 evb-ast2600 ttyS4 evb-ast2600 login: root Password: root@evb-ast2600:~# BTW, is there an option with Qemu to boot u-boot and linux image separately? Also something like TFTP from u-boot (Qemu) to my VM (Ubuntu) where I'm running my TFTP server. Please let me know if there are any steps for the same. Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 12:59, Troy Lee <troy_lee@aspeedtech.com<mailto:troy_lee@aspeedtech.com>> wrote: Hi Vinothkumar, I’m not sure what’s wrong. Beware that the QEMU will directly write into your image file, so you might want to running it on a copy or use -snapshot option. I could boot into OS with the following qemu command: qemu-system-arm -M ast2600-evb -drive file=image-bmc,format=raw,if=mtd -nographic -nic user My QEMU version: qemu-system-arm --version QEMU emulator version 5.2.50 (v5.2.0-991-g45240eed4f) Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers Thanks, Troy Lee From: VINOTHKUMAR RK <vkrk.user@gmail.com<mailto:vkrk.user@gmail.com>> Sent: Friday, February 5, 2021 12:19 PM To: Troy Lee <troy_lee@aspeedtech.com<mailto:troy_lee@aspeedtech.com>> Cc: openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org> Subject: Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi Troy, Thanks for sharing the changes, with this I'm able to generate mtd image. But when I try to load them through Qemu, it's getting stuck with the below error. Is there any workaround? Error log: ------------ fdt_root: FDT_ERR_BADMAGIC ERROR: root node setup failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### Qemu command: ----------------------- qemu-system-arm -m 1G -M ast2600-evb -nographic -drive file=obmc-phosphor-image-evb-ast2600-20210205034901.static.mtd,format=raw,if=mtd -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443,hostname=qemu Qemu log: -------------- U-Boot 2019.04 (Feb 04 2021 - 10:27:21 +0000) SOC: AST2600-A0 eSPI Mode: SIO:Enable : SuperIO-2e Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII Model: AST2600 EVB DRAM: already initialized, 240 MiB (capacity:256 MiB, VGA:64 MiB), ECC off PCIE-0: Link down MMC: sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 Loading Environment from SPI Flash... *** Warning - spi_flash_probe_bus_cs() failed, using default environment In: serial@1e784000 Out: serial@1e784000 Err: serial@1e784000 Model: AST2600 EVB Net: Warning: ftgmac@1e660000 (eth0) using random MAC address - 5e:23:16:3b:07:db eth0: ftgmac@1e660000 Warning: ftgmac@1e680000 (eth1) using random MAC address - 92:2d:b9:4b:a5:93 , eth1: ftgmac@1e680000 Warning: ftgmac@1e670000 (eth2) using random MAC address - f6:16:60:c6:0a:2d , eth2: ftgmac@1e670000 Warning: ftgmac@1e690000 (eth3) using random MAC address - 02:43:32:16:41:6d , eth3: ftgmac@1e690000 Hit any key to stop autoboot: 0 ## Loading kernel from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'kernel@1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x2010012c Data Size: 3527112 Bytes = 3.4 MiB Architecture: ARM OS: Linux Load Address: 0x80001000 Entry Point: 0x80001000 Hash algo: sha256 Hash value: d3bfde4459bab8272cda12f0747d47735521c9ee4f5786283cfea439398c976d Verifying Hash Integrity ... sha256+ OK ## Loading ramdisk from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'ramdisk@1' ramdisk subimage Description: obmc-phosphor-initramfs Type: RAMDisk Image Compression: uncompressed Data Start: 0x20465cf8 Data Size: 1087608 Bytes = 1 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha256 Hash value: 488f44eb0c954ef85ede0c1dde3803696b3637d41996fc2be9610bbdb756b1a9 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'fdt@aspeed-ast2600-evb.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x2045d408 Data Size: 34852 Bytes = 34 KiB Architecture: ARM Hash algo: sha256 Hash value: a9bcf2a34ea7477d2c5f86ec793b659ecce07554dee5897460198f513ede4d0b Verifying Hash Integrity ... sha256+ OK Booting using the fdt blob at 0x2045d408 Loading Kernel Image ... OK Loading Ramdisk to 8ce57000, end 8cf60878 ... OK Loading Device Tree to 8ce4b000, end 8ce56823 ... OK fdt_root: FDT_ERR_BADMAGIC ERROR: root node setup failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 07:57, Troy Lee <mailto:troy_lee@aspeedtech.com<mailto:troy_lee@aspeedtech.com>> wrote: Hi Vinothkumar, Please refer to the following two changes in Gerrit: • https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 • https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 Thanks, Troy Lee From: openbmc <openbmc-bounces+troy_lee=mailto:aspeedtech.com@lists.ozlabs.org<mailto:aspeedtech.com@lists.ozlabs.org>> On Behalf Of VINOTHKUMAR RK Sent: Thursday, February 4, 2021 8:28 PM To: mailto:openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org> Subject: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi, I'm trying to build for evb-ast2600 platform, but it doesn't succeed. Please help. Build command: (fresh checkout and build) TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env bitbake obmc-phosphor-image Branch details: commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f Error Log: Loading cache: 100% | | ETA: --:--:-- Loaded 0 entries from dependency cache. Parsing recipes: 100% |########################################################################################################################################################################| Time: 0:00:44 Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 targets, 362 skipped, 0 masked, 0 errors. WARNING: No bb files in default matched BBFILE_PATTERN_meta-evb-ast2600 '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.49.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "ubuntu-20.04" TARGET_SYS = "arm-openbmc-linux-gnueabi" MACHINE = "evb-ast2600" DISTRO = "openbmc-phosphor" DISTRO_VERSION = "0.1.0" TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" TARGET_FPU = "hard" meta meta-poky meta-oe meta-networking meta-python meta-phosphor meta-aspeed meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" Initialising tasks: 100% |#####################################################################################################################################################################| Time: 0:00:03 Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, 0% complete) NOTE: Executing Tasks WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' is too large! ERROR: Logfile of failure stored in: /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 ERROR: Task (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) failed with exit code '1' NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to be rerun and 1 failed. Summary: 1 task failed: /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static Summary: There were 10 WARNING messages shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Regards, VINOTHKUMAR RK [-- Attachment #2: Type: text/html, Size: 18200 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-02-05 9:28 ` Troy Lee @ 2021-02-15 11:45 ` VINOTHKUMAR RK 2021-02-17 2:40 ` Troy Lee 0 siblings, 1 reply; 12+ messages in thread From: VINOTHKUMAR RK @ 2021-02-15 11:45 UTC (permalink / raw) To: Troy Lee; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 14172 bytes --] Hi Troy, I tried to load the Kernel image (fitImage-obmc-phosphor-initramfs-evb-ast2600--5.8.17+git0+3cc95ae407-r0-evb-ast2600-20210205034901.bin) directly through TFTP in evb-ast2600. I could see a crash due to some file system mounting issue. Can you please let me know if you've any fix/workaround for this issue? Please check the below link for complete log: - https://gist.github.com/vkrk-user/909b554aa4cddd10663ad706d4c182a7 Crash log: ------------- mount: mounting /dev/mtdblock4 on run/initramfs/ro failed: Invalid argument [ 2.475872] jffs2: notice: (98) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (2 dead, 0 orphan) found. [ 2.768965] overlayfs: upper fs does not support tmpfile. [ 3.040864] overlayfs: upper fs does not support RENAME_WHITEOUT. chroot: can't execute '/bin/sh': No such file or directory Unable to confirm /sbin/init is an executable non-empty file in[ 3.333044] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 3.342421] CPU: 0 PID: 1 Comm: init Not tainted 5.8.17-3cc95ae #1 [ 3.349316] Hardware name: Generic DT based system [ 3.354661] Backtrace: [ 3.357411] [<8010d92c>] (dump_backtrace) from [<8010db80>] (show_stack+0x20/0x24) [ 3.365860] r7:80a049bc r6:60000093 r5:00000000 r4:80c66358 [ 3.372184] [<8010db60>] (show_stack) from [<808b7000>] (dump_stack+0x9c/0xb0) [ 3.380248] [<808b6f64>] (dump_stack) from [<801211a0>] (panic+0x114/0x340) [ 3.388016] r7:80a049bc r6:80c0df08 r5:00000000 r4:80c88380 [ 3.394336] [<8012108c>] (panic) from [<80127178>] (complete_and_exit+0x0/0x2c) [ 3.402492] r3:00000001 r2:00000000 r1:00000100 r0:80a049bc [ 3.408803] r7:ffffe000 [ 3.411630] [<8012678c>] (do_exit) from [<80127214>] (do_group_exit+0x50/0xc8) [ 3.419677] r7:000000f8 [ 3.422503] [<801271c4>] (do_group_exit) from [<801272ac>] (__wake_up_parent+0x0/0x30) [ 3.431338] r7:000000f8 r6:00000004 r5:00000004 r4:006ec190 [ 3.437656] [<8012728c>] (sys_exit_group) from [<80100060>] (ret_fast_syscall+0x0/0x54) [ 3.446587] Exception stack(0xbd0dffa8 to 0xbd0dfff0) [ 3.452225] ffa0: 006ec190 00000004 00000001 00000000 00000001 006ec190 [ 3.461351] ffc0: 006ec190 00000004 00000004 000000f8 00000000 00000000 00507a7c 00000000 [ 3.470476] ffe0: 00507b34 7ed76a14 00497934 76dcc574 [ 3.476121] CPU1: stopping [ 3.479141] CPU: 1 PID: 99 Comm: jffs2_gcd_mtd5 Not tainted 5.8.17-3cc95ae #1 [ 3.487099] Hardware name: Generic DT based system Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 14:58, Troy Lee <troy_lee@aspeedtech.com> wrote: > Hi Vinothkumar, > > > > If you want to boot different Kernel from TFTP, I think you can use tftp > command in u-boot. > > ast# dhcp > > ast# tftp 0x83000000 serverip:/path/image-kernel > > ast# bootm 0x83000000 > > > > If you want to use qemu options loading u-boot/kernel images to different > memory offset, I’m not familiar with this. Need some expert’s help here. > > > > Thanks, > > Troy Lee > > > > *From:* VINOTHKUMAR RK <vkrk.user@gmail.com> > *Sent:* Friday, February 5, 2021 4:16 PM > *To:* Troy Lee <troy_lee@aspeedtech.com> > *Cc:* openbmc@lists.ozlabs.org > *Subject:* Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is > too large!' > > > > Hi Troy, > > > > Thanks a lot for your input! > > > > Looks like there was some problem with my Qemu. I was using some older > version "version 4.2.1 (Debian 1:4.2-3ubuntu6.11)". > > The image came up fine when I tried with the latest Qemu "aspeed-6.0" > branch, it gives the image version which you're using. > > > > Output: > > --------- > > Phosphor OpenBMC (Phosphor OpenBMC Project Reference Distro) 0.1.0 > evb-ast2600 ttyS4 > > > > evb-ast2600 login: root > > Password: > > root@evb-ast2600:~# > > > > BTW, is there an option with Qemu to boot u-boot and linux image > separately? Also something like TFTP from u-boot (Qemu) to my VM (Ubuntu) > where I'm running my TFTP server. Please let me know if there are any steps > for the same. > > > > > > Regards, > > Vinoth Kumar RK > > > > > > On Fri, 5 Feb 2021 at 12:59, Troy Lee <troy_lee@aspeedtech.com> wrote: > > Hi Vinothkumar, > > I’m not sure what’s wrong. Beware that the QEMU will directly write into > your image file, so you might want to running it on a copy or use -snapshot > option. > > I could boot into OS with the following qemu command: > qemu-system-arm -M ast2600-evb -drive file=image-bmc,format=raw,if=mtd > -nographic -nic user > > My QEMU version: > qemu-system-arm --version > QEMU emulator version 5.2.50 (v5.2.0-991-g45240eed4f) > Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers > > Thanks, > Troy Lee > > From: VINOTHKUMAR RK <vkrk.user@gmail.com> > Sent: Friday, February 5, 2021 12:19 PM > To: Troy Lee <troy_lee@aspeedtech.com> > Cc: openbmc@lists.ozlabs.org > Subject: Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too > large!' > > Hi Troy, > > Thanks for sharing the changes, with this I'm able to generate mtd image. > But when I try to load them through Qemu, it's getting stuck with the below > error. Is there any workaround? > > Error log: > ------------ > fdt_root: FDT_ERR_BADMAGIC > ERROR: root node setup failed > - must RESET the board to recover. > > FDT creation failed! hanging...### ERROR ### Please RESET the board ### > > > Qemu command: > ----------------------- > qemu-system-arm -m 1G -M ast2600-evb -nographic -drive > file=obmc-phosphor-image-evb-ast2600-20210205034901.static.mtd,format=raw,if=mtd > -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443 > -:443,hostname=qemu > > Qemu log: > -------------- > U-Boot 2019.04 (Feb 04 2021 - 10:27:21 +0000) > > SOC: AST2600-A0 > eSPI Mode: SIO:Enable : SuperIO-2e > Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII > Model: AST2600 EVB > DRAM: already initialized, 240 MiB (capacity:256 MiB, VGA:64 MiB), ECC off > PCIE-0: Link down > MMC: > > sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 > Loading Environment from SPI Flash... *** Warning - > spi_flash_probe_bus_cs() failed, using default environment > > In: serial@1e784000 > Out: serial@1e784000 > Err: serial@1e784000 > Model: AST2600 EVB > Net: > Warning: ftgmac@1e660000 (eth0) using random MAC address - > 5e:23:16:3b:07:db > eth0: ftgmac@1e660000 > Warning: ftgmac@1e680000 (eth1) using random MAC address - > 92:2d:b9:4b:a5:93 > , eth1: ftgmac@1e680000 > Warning: ftgmac@1e670000 (eth2) using random MAC address - > f6:16:60:c6:0a:2d > , eth2: ftgmac@1e670000 > Warning: ftgmac@1e690000 (eth3) using random MAC address - > 02:43:32:16:41:6d > , eth3: ftgmac@1e690000 > Hit any key to stop autoboot: 0 > ## Loading kernel from FIT Image at 20100000 ... > Using 'conf@aspeed-ast2600-evb.dtb' configuration > Trying 'kernel@1' kernel subimage > Description: Linux kernel > Type: Kernel Image > Compression: uncompressed > Data Start: 0x2010012c > Data Size: 3527112 Bytes = 3.4 MiB > Architecture: ARM > OS: Linux > Load Address: 0x80001000 > Entry Point: 0x80001000 > Hash algo: sha256 > Hash value: > d3bfde4459bab8272cda12f0747d47735521c9ee4f5786283cfea439398c976d > Verifying Hash Integrity ... sha256+ OK > ## Loading ramdisk from FIT Image at 20100000 ... > Using 'conf@aspeed-ast2600-evb.dtb' configuration > Trying 'ramdisk@1' ramdisk subimage > Description: obmc-phosphor-initramfs > Type: RAMDisk Image > Compression: uncompressed > Data Start: 0x20465cf8 > Data Size: 1087608 Bytes = 1 MiB > Architecture: ARM > OS: Linux > Load Address: unavailable > Entry Point: unavailable > Hash algo: sha256 > Hash value: > 488f44eb0c954ef85ede0c1dde3803696b3637d41996fc2be9610bbdb756b1a9 > Verifying Hash Integrity ... sha256+ OK > ## Loading fdt from FIT Image at 20100000 ... > Using 'conf@aspeed-ast2600-evb.dtb' configuration > Trying 'fdt@aspeed-ast2600-evb.dtb' fdt subimage > Description: Flattened Device Tree blob > Type: Flat Device Tree > Compression: uncompressed > Data Start: 0x2045d408 > Data Size: 34852 Bytes = 34 KiB > Architecture: ARM > Hash algo: sha256 > Hash value: > a9bcf2a34ea7477d2c5f86ec793b659ecce07554dee5897460198f513ede4d0b > Verifying Hash Integrity ... sha256+ OK > Booting using the fdt blob at 0x2045d408 > Loading Kernel Image ... OK > Loading Ramdisk to 8ce57000, end 8cf60878 ... OK > Loading Device Tree to 8ce4b000, end 8ce56823 ... OK > fdt_root: FDT_ERR_BADMAGIC > ERROR: root node setup failed > - must RESET the board to recover. > > FDT creation failed! hanging...### ERROR ### Please RESET the board ### > > > > > > Regards, > Vinoth Kumar RK > > On Fri, 5 Feb 2021 at 07:57, Troy Lee <mailto:troy_lee@aspeedtech.com> > wrote: > Hi Vinothkumar, > > Please refer to the following two changes in Gerrit: > • https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 > • https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 > > Thanks, > Troy Lee > > From: openbmc <openbmc-bounces+troy_lee=mailto: > aspeedtech.com@lists.ozlabs.org> On Behalf Of VINOTHKUMAR RK > Sent: Thursday, February 4, 2021 8:28 PM > To: mailto:openbmc@lists.ozlabs.org > Subject: evb-ast2600: Getting some build errors - 'u-boot.bin' is too > large!' > > Hi, > > I'm trying to build for evb-ast2600 platform, but it doesn't succeed. > Please help. > > Build command: (fresh checkout and build) > TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env > bitbake obmc-phosphor-image > > Branch details: > commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f > > > Error Log: > Loading cache: 100% | > > | ETA: --:--:-- > Loaded 0 entries from dependency cache. > Parsing recipes: 100% > |########################################################################################################################################################################| > Time: 0:00:44 > Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 targets, > 362 skipped, 0 masked, 0 errors. > WARNING: No bb files in default matched BBFILE_PATTERN_meta-evb-ast2600 > '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' > NOTE: Resolving any missing task queue dependencies > > Build Configuration: > BB_VERSION = "1.49.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "ubuntu-20.04" > TARGET_SYS = "arm-openbmc-linux-gnueabi" > MACHINE = "evb-ast2600" > DISTRO = "openbmc-phosphor" > DISTRO_VERSION = "0.1.0" > TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" > TARGET_FPU = "hard" > meta > meta-poky > meta-oe > meta-networking > meta-python > meta-phosphor > meta-aspeed > meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" > > Initialising tasks: 100% > |#####################################################################################################################################################################| > Time: 0:00:03 > Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, 0% > complete) > NOTE: Executing Tasks > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > Feature 'phosphor-gpio-keys' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY > is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > Feature 'phosphor-gpio-keys' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY > is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: > This may cause runtime issues, dropping feature and allowing configuration > to continue > WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: > obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] > ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image > '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' > is too large! > ERROR: Logfile of failure stored in: > /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 > ERROR: Task > (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) > failed with exit code '1' > NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to be > rerun and 1 failed. > > Summary: 1 task failed: > > /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb: > do_generate_static > Summary: There were 10 WARNING messages shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > Regards, > VINOTHKUMAR RK > > [-- Attachment #2: Type: text/html, Size: 19482 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-02-15 11:45 ` VINOTHKUMAR RK @ 2021-02-17 2:40 ` Troy Lee 0 siblings, 0 replies; 12+ messages in thread From: Troy Lee @ 2021-02-17 2:40 UTC (permalink / raw) To: VINOTHKUMAR RK; +Cc: openbmc Hi Vinoth Kumar, > mount: mounting /dev/mtdblock4 on run/initramfs/ro failed: Invalid argument It seems that kernel is corrected loaded and runs, but the rofs isn’t. You could check if the rofs in your flash image, or you could load it into ram through tftp, then modifying bootarg indicate Kernel to mount rofs from different place. Thanks, Troy Lee From: VINOTHKUMAR RK <vkrk.user@gmail.com> Sent: Monday, February 15, 2021 7:46 PM To: Troy Lee <troy_lee@aspeedtech.com> Cc: openbmc@lists.ozlabs.org Subject: Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi Troy, I tried to load the Kernel image (fitImage-obmc-phosphor-initramfs-evb-ast2600--5.8.17+git0+3cc95ae407-r0-evb-ast2600-20210205034901.bin) directly through TFTP in evb-ast2600. I could see a crash due to some file system mounting issue. Can you please let me know if you've any fix/workaround for this issue? Please check the below link for complete log: - https://gist.github.com/vkrk-user/909b554aa4cddd10663ad706d4c182a7 Crash log: ------------- mount: mounting /dev/mtdblock4 on run/initramfs/ro failed: Invalid argument [ 2.475872] jffs2: notice: (98) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (2 dead, 0 orphan) found. [ 2.768965] overlayfs: upper fs does not support tmpfile. [ 3.040864] overlayfs: upper fs does not support RENAME_WHITEOUT. chroot: can't execute '/bin/sh': No such file or directory Unable to confirm /sbin/init is an executable non-empty file in[ 3.333044] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 3.342421] CPU: 0 PID: 1 Comm: init Not tainted 5.8.17-3cc95ae #1 [ 3.349316] Hardware name: Generic DT based system [ 3.354661] Backtrace: [ 3.357411] [<8010d92c>] (dump_backtrace) from [<8010db80>] (show_stack+0x20/0x24) [ 3.365860] r7:80a049bc r6:60000093 r5:00000000 r4:80c66358 [ 3.372184] [<8010db60>] (show_stack) from [<808b7000>] (dump_stack+0x9c/0xb0) [ 3.380248] [<808b6f64>] (dump_stack) from [<801211a0>] (panic+0x114/0x340) [ 3.388016] r7:80a049bc r6:80c0df08 r5:00000000 r4:80c88380 [ 3.394336] [<8012108c>] (panic) from [<80127178>] (complete_and_exit+0x0/0x2c) [ 3.402492] r3:00000001 r2:00000000 r1:00000100 r0:80a049bc [ 3.408803] r7:ffffe000 [ 3.411630] [<8012678c>] (do_exit) from [<80127214>] (do_group_exit+0x50/0xc8) [ 3.419677] r7:000000f8 [ 3.422503] [<801271c4>] (do_group_exit) from [<801272ac>] (__wake_up_parent+0x0/0x30) [ 3.431338] r7:000000f8 r6:00000004 r5:00000004 r4:006ec190 [ 3.437656] [<8012728c>] (sys_exit_group) from [<80100060>] (ret_fast_syscall+0x0/0x54) [ 3.446587] Exception stack(0xbd0dffa8 to 0xbd0dfff0) [ 3.452225] ffa0: 006ec190 00000004 00000001 00000000 00000001 006ec190 [ 3.461351] ffc0: 006ec190 00000004 00000004 000000f8 00000000 00000000 00507a7c 00000000 [ 3.470476] ffe0: 00507b34 7ed76a14 00497934 76dcc574 [ 3.476121] CPU1: stopping [ 3.479141] CPU: 1 PID: 99 Comm: jffs2_gcd_mtd5 Not tainted 5.8.17-3cc95ae #1 [ 3.487099] Hardware name: Generic DT based system Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 14:58, Troy Lee <mailto:troy_lee@aspeedtech.com> wrote: Hi Vinothkumar, If you want to boot different Kernel from TFTP, I think you can use tftp command in u-boot. ast# dhcp ast# tftp 0x83000000 serverip:/path/image-kernel ast# bootm 0x83000000 If you want to use qemu options loading u-boot/kernel images to different memory offset, I’m not familiar with this. Need some expert’s help here. Thanks, Troy Lee From: VINOTHKUMAR RK <mailto:vkrk.user@gmail.com> Sent: Friday, February 5, 2021 4:16 PM To: Troy Lee <mailto:troy_lee@aspeedtech.com> Cc: mailto:openbmc@lists.ozlabs.org Subject: Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi Troy, Thanks a lot for your input! Looks like there was some problem with my Qemu. I was using some older version "version 4.2.1 (Debian 1:4.2-3ubuntu6.11)". The image came up fine when I tried with the latest Qemu "aspeed-6.0" branch, it gives the image version which you're using. Output: --------- Phosphor OpenBMC (Phosphor OpenBMC Project Reference Distro) 0.1.0 evb-ast2600 ttyS4 evb-ast2600 login: root Password: root@evb-ast2600:~# BTW, is there an option with Qemu to boot u-boot and linux image separately? Also something like TFTP from u-boot (Qemu) to my VM (Ubuntu) where I'm running my TFTP server. Please let me know if there are any steps for the same. Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 12:59, Troy Lee <mailto:troy_lee@aspeedtech.com> wrote: Hi Vinothkumar, I’m not sure what’s wrong. Beware that the QEMU will directly write into your image file, so you might want to running it on a copy or use -snapshot option. I could boot into OS with the following qemu command: qemu-system-arm -M ast2600-evb -drive file=image-bmc,format=raw,if=mtd -nographic -nic user My QEMU version: qemu-system-arm --version QEMU emulator version 5.2.50 (v5.2.0-991-g45240eed4f) Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers Thanks, Troy Lee From: VINOTHKUMAR RK <mailto:vkrk.user@gmail.com> Sent: Friday, February 5, 2021 12:19 PM To: Troy Lee <mailto:troy_lee@aspeedtech.com> Cc: mailto:openbmc@lists.ozlabs.org Subject: Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi Troy, Thanks for sharing the changes, with this I'm able to generate mtd image. But when I try to load them through Qemu, it's getting stuck with the below error. Is there any workaround? Error log: ------------ fdt_root: FDT_ERR_BADMAGIC ERROR: root node setup failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### Qemu command: ----------------------- qemu-system-arm -m 1G -M ast2600-evb -nographic -drive file=obmc-phosphor-image-evb-ast2600-20210205034901.static.mtd,format=raw,if=mtd -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443,hostname=qemu Qemu log: -------------- U-Boot 2019.04 (Feb 04 2021 - 10:27:21 +0000) SOC: AST2600-A0 eSPI Mode: SIO:Enable : SuperIO-2e Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII Model: AST2600 EVB DRAM: already initialized, 240 MiB (capacity:256 MiB, VGA:64 MiB), ECC off PCIE-0: Link down MMC: sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 Loading Environment from SPI Flash... *** Warning - spi_flash_probe_bus_cs() failed, using default environment In: serial@1e784000 Out: serial@1e784000 Err: serial@1e784000 Model: AST2600 EVB Net: Warning: ftgmac@1e660000 (eth0) using random MAC address - 5e:23:16:3b:07:db eth0: ftgmac@1e660000 Warning: ftgmac@1e680000 (eth1) using random MAC address - 92:2d:b9:4b:a5:93 , eth1: ftgmac@1e680000 Warning: ftgmac@1e670000 (eth2) using random MAC address - f6:16:60:c6:0a:2d , eth2: ftgmac@1e670000 Warning: ftgmac@1e690000 (eth3) using random MAC address - 02:43:32:16:41:6d , eth3: ftgmac@1e690000 Hit any key to stop autoboot: 0 ## Loading kernel from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'kernel@1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x2010012c Data Size: 3527112 Bytes = 3.4 MiB Architecture: ARM OS: Linux Load Address: 0x80001000 Entry Point: 0x80001000 Hash algo: sha256 Hash value: d3bfde4459bab8272cda12f0747d47735521c9ee4f5786283cfea439398c976d Verifying Hash Integrity ... sha256+ OK ## Loading ramdisk from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'ramdisk@1' ramdisk subimage Description: obmc-phosphor-initramfs Type: RAMDisk Image Compression: uncompressed Data Start: 0x20465cf8 Data Size: 1087608 Bytes = 1 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha256 Hash value: 488f44eb0c954ef85ede0c1dde3803696b3637d41996fc2be9610bbdb756b1a9 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 20100000 ... Using 'conf@aspeed-ast2600-evb.dtb' configuration Trying 'fdt@aspeed-ast2600-evb.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x2045d408 Data Size: 34852 Bytes = 34 KiB Architecture: ARM Hash algo: sha256 Hash value: a9bcf2a34ea7477d2c5f86ec793b659ecce07554dee5897460198f513ede4d0b Verifying Hash Integrity ... sha256+ OK Booting using the fdt blob at 0x2045d408 Loading Kernel Image ... OK Loading Ramdisk to 8ce57000, end 8cf60878 ... OK Loading Device Tree to 8ce4b000, end 8ce56823 ... OK fdt_root: FDT_ERR_BADMAGIC ERROR: root node setup failed - must RESET the board to recover. FDT creation failed! hanging...### ERROR ### Please RESET the board ### Regards, Vinoth Kumar RK On Fri, 5 Feb 2021 at 07:57, Troy Lee <mailto:mailto:troy_lee@aspeedtech.com> wrote: Hi Vinothkumar, Please refer to the following two changes in Gerrit: • https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 • https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 Thanks, Troy Lee From: openbmc <openbmc-bounces+troy_lee=mailto:mailto:aspeedtech.com@lists.ozlabs.org> On Behalf Of VINOTHKUMAR RK Sent: Thursday, February 4, 2021 8:28 PM To: mailto:mailto:openbmc@lists.ozlabs.org Subject: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' Hi, I'm trying to build for evb-ast2600 platform, but it doesn't succeed. Please help. Build command: (fresh checkout and build) TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env bitbake obmc-phosphor-image Branch details: commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f Error Log: Loading cache: 100% | | ETA: --:--:-- Loaded 0 entries from dependency cache. Parsing recipes: 100% |########################################################################################################################################################################| Time: 0:00:44 Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 targets, 362 skipped, 0 masked, 0 errors. WARNING: No bb files in default matched BBFILE_PATTERN_meta-evb-ast2600 '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.49.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "ubuntu-20.04" TARGET_SYS = "arm-openbmc-linux-gnueabi" MACHINE = "evb-ast2600" DISTRO = "openbmc-phosphor" DISTRO_VERSION = "0.1.0" TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" TARGET_FPU = "hard" meta meta-poky meta-oe meta-networking meta-python meta-phosphor meta-aspeed meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" Initialising tasks: 100% |#####################################################################################################################################################################| Time: 0:00:03 Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, 0% complete) NOTE: Executing Tasks WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_metadata: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-gpio-keys' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: Feature 'phosphor-vlan' not found, but KERNEL_DANGLING_FEATURES_WARN_ONLY is set WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 do_kernel_configme: This may cause runtime issues, dropping feature and allowing configuration to continue WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' is too large! ERROR: Logfile of failure stored in: /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 ERROR: Task (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) failed with exit code '1' NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to be rerun and 1 failed. Summary: 1 task failed: /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static Summary: There were 10 WARNING messages shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Regards, VINOTHKUMAR RK ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-02-05 2:27 ` Troy Lee 2021-02-05 4:19 ` VINOTHKUMAR RK @ 2021-03-08 5:52 ` Thang Nguyen 2021-03-09 22:10 ` Brad Bishop 1 sibling, 1 reply; 12+ messages in thread From: Thang Nguyen @ 2021-03-08 5:52 UTC (permalink / raw) To: openbmc [-- Attachment #1: Type: text/plain, Size: 5103 bytes --] Hi, On 05/02/2021 09:27, Troy Lee wrote: > > Hi Vinothkumar, > > Please refer to the following two changes in Gerrit: > > * https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 > <https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343> > * https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 > <https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344> > Are these changes merged? I can't access these links. > > * > > Thanks, > > Troy Lee > > *From:* openbmc > <openbmc-bounces+troy_lee=aspeedtech.com@lists.ozlabs.org> *On Behalf > Of *VINOTHKUMAR RK > *Sent:* Thursday, February 4, 2021 8:28 PM > *To:* openbmc@lists.ozlabs.org > *Subject:* evb-ast2600: Getting some build errors - 'u-boot.bin' is > too large!' > > Hi, > > I'm trying to build for evb-ast2600 platform, but it doesn't succeed. > Please help. > > Build command: (fresh checkout and build) > > TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2600/conf . openbmc-env > bitbake obmc-phosphor-image > > Branch details: > > commit 7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f > > Error Log: > > Loading cache: 100% | | ETA: --:--:-- > Loaded 0 entries from dependency cache. > Parsing recipes: 100% > |########################################################################################################################################################################| > Time: 0:00:44 > Parsing of 2424 .bb files complete (0 cached, 2424 parsed). 3683 > targets, 362 skipped, 0 masked, 0 errors. > WARNING: No bb files in default matched > BBFILE_PATTERN_meta-evb-ast2600 > '^/home/vinoth/project/openbmc/meta-evb/meta-evb-aspeed/meta-evb-ast2600/' > NOTE: Resolving any missing task queue dependencies > > Build Configuration: > BB_VERSION = "1.49.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "ubuntu-20.04" > TARGET_SYS = "arm-openbmc-linux-gnueabi" > MACHINE = "evb-ast2600" > DISTRO = "openbmc-phosphor" > DISTRO_VERSION = "0.1.0" > TUNE_FEATURES = "arm armv7a vfp vfpv4d16 callconvention-hard" > TARGET_FPU = "hard" > meta > meta-poky > meta-oe > meta-networking > meta-python > meta-phosphor > meta-aspeed > meta-evb-ast2600 = "master:7dc2f7a38dccb3d87a9b79d0a66b25da1027a72f" > > Initialising tasks: 100% > |#####################################################################################################################################################################| > Time: 0:00:03 > Sstate summary: Wanted 1378 Found 939 Missed 439 Current 0 (68% match, > 0% complete) > NOTE: Executing Tasks > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 > do_kernel_metadata: Feature 'phosphor-gpio-keys' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 > do_kernel_metadata: This may cause runtime issues, dropping feature > and allowing configuration to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 > do_kernel_metadata: Feature 'phosphor-vlan' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 > do_kernel_metadata: This may cause runtime issues, dropping feature > and allowing configuration to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 > do_kernel_configme: Feature 'phosphor-gpio-keys' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 > do_kernel_configme: This may cause runtime issues, dropping feature > and allowing configuration to continue > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 > do_kernel_configme: Feature 'phosphor-vlan' not found, but > KERNEL_DANGLING_FEATURES_WARN_ONLY is set > WARNING: linux-aspeed-5.8.17+gitAUTOINC+3cc95ae407-r0 > do_kernel_configme: This may cause runtime issues, dropping feature > and allowing configuration to continue > WARNING: obmc-phosphor-sysd-1.0-r1 do_package_qa: QA Issue: > obmc-phosphor-sysd: SRC_URI uses PN not BPN [src-uri-bad] > ERROR: obmc-phosphor-image-1.0-r0 do_generate_static: Image > '/home/vinoth/project/openbmc/build/tmp/deploy/images/evb-ast2600/u-boot.bin' > is too large! > ERROR: Logfile of failure stored in: > /home/vinoth/project/openbmc/build/tmp/work/evb_ast2600-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/temp/log.do_generate_static.2176796 > ERROR: Task > (/home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static) > failed with exit code '1' > NOTE: Tasks Summary: Attempted 4041 tasks of which 2680 didn't need to > be rerun and 1 failed. > > Summary: 1 task failed: > /home/vinoth/project/openbmc/meta-phosphor/recipes-phosphor/images/obmc-phosphor-image.bb:do_generate_static > Summary: There were 10 WARNING messages shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > Regards, > > VINOTHKUMAR RK > [-- Attachment #2: Type: text/html, Size: 12060 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-03-08 5:52 ` Thang Nguyen @ 2021-03-09 22:10 ` Brad Bishop 2021-03-11 3:11 ` Troy Lee 0 siblings, 1 reply; 12+ messages in thread From: Brad Bishop @ 2021-03-09 22:10 UTC (permalink / raw) To: Thang Nguyen; +Cc: openbmc On Mon, Mar 08, 2021 at 12:52:41PM +0700, Thang Nguyen wrote: >Hi, > >On 05/02/2021 09:27, Troy Lee wrote: >> >>Hi Vinothkumar, >> >>Please refer to the following two changes in Gerrit: >> >> * https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 >> <https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343> >> * https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 >> <https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344> >> >Are these changes merged? I can't access these links. Hi - We changed our process a bit and now patches are to be submitted to openbmc/openbmc instead of openbmc/meta-aspeed. To help with that transition I thought it would make sense to mark these as hidden in Gerrit, but that seems to have gotten in the way a couple times now. I've changed the project flag again on all these meta-repos to read only - you should be able to view them again now. If we want any of these merged - they'll need to be re-submitted to openbmc/openbmc. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-03-09 22:10 ` Brad Bishop @ 2021-03-11 3:11 ` Troy Lee 2021-03-11 12:00 ` Brad Bishop 0 siblings, 1 reply; 12+ messages in thread From: Troy Lee @ 2021-03-11 3:11 UTC (permalink / raw) To: Brad Bishop; +Cc: openbmc, Thang Nguyen Hi Brad, The 03/10/2021 06:10, Brad Bishop wrote: > On Mon, Mar 08, 2021 at 12:52:41PM +0700, Thang Nguyen wrote: > >Hi, > > > >On 05/02/2021 09:27, Troy Lee wrote: > >> > >>Hi Vinothkumar, > >> > >>Please refer to the following two changes in Gerrit: > >> > >> * https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343 > >> <https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/39343> > >> * https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344 > >> <https://gerrit.openbmc-project.xyz/c/openbmc/meta-aspeed/+/39344> > >> > >Are these changes merged? I can't access these links. > > Hi - We changed our process a bit and now patches are to be submitted to > openbmc/openbmc instead of openbmc/meta-aspeed. > > To help with that transition I thought it would make sense to mark these > as hidden in Gerrit, but that seems to have gotten in the way a couple > times now. > > I've changed the project flag again on all these meta-repos to read only > - you should be able to view them again now. > > If we want any of these merged - they'll need to be re-submitted to > openbmc/openbmc. That explains why I can't find these patches a week ago, and it appears again yesterday. Thanks for pointing it out, I'll re-submit the change against to openbmc/openbmc. Thanks, Troy Lee ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' 2021-03-11 3:11 ` Troy Lee @ 2021-03-11 12:00 ` Brad Bishop 0 siblings, 0 replies; 12+ messages in thread From: Brad Bishop @ 2021-03-11 12:00 UTC (permalink / raw) To: Troy Lee; +Cc: openbmc, Thang Nguyen On Thu, Mar 11, 2021 at 03:11:07AM +0000, Troy Lee wrote: >Hi Brad, > >The 03/10/2021 06:10, Brad Bishop wrote: >> Hi - We changed our process a bit and now patches are to be submitted to >> openbmc/openbmc instead of openbmc/meta-aspeed. >> >> To help with that transition I thought it would make sense to mark these >> as hidden in Gerrit, but that seems to have gotten in the way a couple >> times now. >> >> I've changed the project flag again on all these meta-repos to read only >> - you should be able to view them again now. >> >> If we want any of these merged - they'll need to be re-submitted to >> openbmc/openbmc. > >That explains why I can't find these patches a week ago, and it appears >again yesterday. Thanks for pointing it out, I'll re-submit the change >against to openbmc/openbmc. > >Thanks, >Troy Lee Thanks Troy! Sorry about the hassle :-( -brad ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-03-11 12:01 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-02-04 12:27 evb-ast2600: Getting some build errors - 'u-boot.bin' is too large!' VINOTHKUMAR RK 2021-02-05 2:27 ` Troy Lee 2021-02-05 4:19 ` VINOTHKUMAR RK 2021-02-05 7:29 ` Troy Lee 2021-02-05 8:15 ` VINOTHKUMAR RK 2021-02-05 9:28 ` Troy Lee 2021-02-15 11:45 ` VINOTHKUMAR RK 2021-02-17 2:40 ` Troy Lee 2021-03-08 5:52 ` Thang Nguyen 2021-03-09 22:10 ` Brad Bishop 2021-03-11 3:11 ` Troy Lee 2021-03-11 12:00 ` Brad Bishop
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.