* What toolchain for vr4181 @ 2003-10-08 16:49 Jørg Ulrich Hansen 2003-10-09 8:30 ` Geert Uytterhoeven 0 siblings, 1 reply; 6+ messages in thread From: Jørg Ulrich Hansen @ 2003-10-08 16:49 UTC (permalink / raw) To: Linux-Mips Hi I am about to start porting Linux to my hardware with an vr4181 processor. The hardware is very close to the osprey architecture. Now my problem is what toolchain to use. I could do with an up to date opinion. ? gcc-2.95.3 ? gcc-2.95.4 ? egcs-1.1.2 ? gcc-3.2 ? binutils 2.13 ? glibc 2.2.5 ? Any patches ? http://www.ltc.com/~brad/mips/mips-cross-toolchain/index.html ? http://kegel.com/crosstool/ Where is a good starting point for a toolchain that will build and work? I would prefere to build it my self because at a later state I might build it under cygwin. But a prebuild does also have interest. Kind regards Jorg ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: What toolchain for vr4181 2003-10-08 16:49 What toolchain for vr4181 Jørg Ulrich Hansen @ 2003-10-09 8:30 ` Geert Uytterhoeven 2003-10-09 11:04 ` Jan-Benedict Glaw 0 siblings, 1 reply; 6+ messages in thread From: Geert Uytterhoeven @ 2003-10-09 8:30 UTC (permalink / raw) To: Jørg Ulrich Hansen; +Cc: Linux-Mips On Wed, 8 Oct 2003, [iso-8859-1] Jørg Ulrich Hansen wrote: > I am about to start porting Linux to my hardware with an vr4181 processor. > The hardware is very close to the osprey architecture. Now my problem is > what toolchain to use. > I could do with an up to date opinion. > > ? gcc-2.95.3 > ? gcc-2.95.4 > ? egcs-1.1.2 > ? gcc-3.2 > ? binutils 2.13 > ? glibc 2.2.5 > ? Any patches > ? http://www.ltc.com/~brad/mips/mips-cross-toolchain/index.html > ? http://kegel.com/crosstool/ > > Where is a good starting point for a toolchain that will build and work? > I would prefere to build it my self because at a later state I might build > it under cygwin. But a prebuild does also have interest. At work we use plain binutils 2.13.2.1 and gcc 3.2.2, which we build ourselves (host is Solaris/SPARC). Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: What toolchain for vr4181 2003-10-09 8:30 ` Geert Uytterhoeven @ 2003-10-09 11:04 ` Jan-Benedict Glaw 2003-10-09 11:25 ` Geert Uytterhoeven 0 siblings, 1 reply; 6+ messages in thread From: Jan-Benedict Glaw @ 2003-10-09 11:04 UTC (permalink / raw) To: Linux-Mips [-- Attachment #1: Type: text/plain, Size: 1282 bytes --] On Thu, 2003-10-09 10:30:57 +0200, Geert Uytterhoeven <geert@linux-m68k.org> wrote in message <Pine.GSO.4.21.0310091030110.7086-100000@waterleaf.sonytel.be>: > On Wed, 8 Oct 2003, [iso-8859-1] Jørg Ulrich Hansen wrote: > > > > Where is a good starting point for a toolchain that will build and work? > > I would prefere to build it my self because at a later state I might build > > it under cygwin. But a prebuild does also have interest. > > At work we use plain binutils 2.13.2.1 and gcc 3.2.2, which we build ourselves > (host is Solaris/SPARC). Joined trees? Which configury? Unfortunately, toolchain questions are quite FAQs, but there doesn't really exist _that_ good HOWTOs which actually contain exactly helpful hints (eg. which versions and/or which additional patches are needed). If companies have some kind of scripts or the like they use, I'd really love to see them published. That'd really help all those guys out there:) MfG, JBG -- Jan-Benedict Glaw jbglaw@lug-owl.de . +49-172-7608481 "Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg fuer einen Freien Staat voll Freier Bürger" | im Internet! | im Irak! ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA)); [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: What toolchain for vr4181 2003-10-09 11:04 ` Jan-Benedict Glaw @ 2003-10-09 11:25 ` Geert Uytterhoeven 2003-12-28 20:30 ` Geert Uytterhoeven 0 siblings, 1 reply; 6+ messages in thread From: Geert Uytterhoeven @ 2003-10-09 11:25 UTC (permalink / raw) To: Jan-Benedict Glaw; +Cc: Linux-Mips On Thu, 9 Oct 2003, Jan-Benedict Glaw wrote: > On Thu, 2003-10-09 10:30:57 +0200, Geert Uytterhoeven <geert@linux-m68k.org> > wrote in message <Pine.GSO.4.21.0310091030110.7086-100000@waterleaf.sonytel.be>: > > On Wed, 8 Oct 2003, [iso-8859-1] Jørg Ulrich Hansen wrote: > > > > > > Where is a good starting point for a toolchain that will build and work? > > > I would prefere to build it my self because at a later state I might build > > > it under cygwin. But a prebuild does also have interest. > > > > At work we use plain binutils 2.13.2.1 and gcc 3.2.2, which we build ourselves > > (host is Solaris/SPARC). > > Joined trees? Which configury? Unfortunately, toolchain questions are > quite FAQs, but there doesn't really exist _that_ good HOWTOs which > actually contain exactly helpful hints (eg. which versions and/or which > additional patches are needed). > > If companies have some kind of scripts or the like they use, I'd really > love to see them published. That'd really help all those guys out > there:) Binutils (binutils-2.13.2.1.tar.bz2): configure --target=mips-linux --prefix=/wherever/you/want Gcc (gcc-core-3.2.2.tar.bz2): configure --target=mips-linux --prefix=/wherever/you/want --enable-languages=c --enable-shared --with-gnu-as --with-gnu-ld --with-system-zlib --enable-long-long --enable-nls --without-included-gettext I took the development libraries and includes from Debian: libc6-dev_2.2.5-11.2_mips.deb libc6_2.2.5-11.2_mips.deb zlib1g-dev_1%3a1.1.4-1_mips.deb zlib1g_1%3a1.1.4-1_mips.deb I wrote very simple Perl clones of dpkg and dpkg-deb with just enough functionality to get `dpkg-cross -i' working on Solaris. I don't know whether I can share them, though. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: What toolchain for vr4181 2003-10-09 11:25 ` Geert Uytterhoeven @ 2003-12-28 20:30 ` Geert Uytterhoeven 2004-01-07 6:42 ` Jan-Benedict Glaw 0 siblings, 1 reply; 6+ messages in thread From: Geert Uytterhoeven @ 2003-12-28 20:30 UTC (permalink / raw) To: Jan-Benedict Glaw; +Cc: Linux-Mips On Thu, 9 Oct 2003, Geert Uytterhoeven wrote: > On Thu, 9 Oct 2003, Jan-Benedict Glaw wrote: > > If companies have some kind of scripts or the like they use, I'd really > > love to see them published. That'd really help all those guys out > > there:) > > Binutils (binutils-2.13.2.1.tar.bz2): > configure --target=mips-linux --prefix=/wherever/you/want > > Gcc (gcc-core-3.2.2.tar.bz2): > configure --target=mips-linux --prefix=/wherever/you/want --enable-languages=c --enable-shared --with-gnu-as --with-gnu-ld --with-systemm-zlib --enable-long-long --enable-nls --without-included-gettext > > I took the development libraries and includes from Debian: > libc6-dev_2.2.5-11.2_mips.deb > libc6_2.2.5-11.2_mips.deb > zlib1g-dev_1%3a1.1.4-1_mips.deb > zlib1g_1%3a1.1.4-1_mips.deb > > I wrote very simple Perl clones of dpkg and dpkg-deb with just enough > functionality to get `dpkg-cross -i' working on Solaris. I don't know whether I > can share them, though. It took me a while, but here they are, wrapped as a Christmas gift! :-) You also have to take /usr/bin/dpkg-cross from a Debian system and probably want to hardcode crossbase=/wherever/you/want, unless you're root. BTW, I'd still really like to have some scripts so I can install (from binary or from sources) Debian binaries in my home dir on a Red Hat or Solaris box. Wishful thinking? --- /dev/null 2003-12-21 17:51:51.000000000 +0100 +++ dpkg 2003-12-28 21:23:47.000000000 +0100 @@ -0,0 +1,29 @@ +#!/usr/bin/perl + +# +# Very simple dpkg clone with just enough functionality to get `dpkg-cross -i' +# working on Solaris +# +# © Copyright 2003 by Geert Uytterhoeven <geert@linux-m68k.org> +# +# This file is subject to the terms and conditions of the GNU General Public +# License. +# + +$progname = $0; +$progname =~ s@^.*/@@g; + + +$args = join(' ', @ARGV); +print STDERR "$progname $args...\n"; + +$arg = shift @ARGV or goto failed; +if ($arg eq '-i') { + $archive = shift @ARGV or goto failed; + system("ar -p $archive data.tar.gz | (cd / && tar zxf - )"); + exit(0); +} + +failed: +die "$progname $args: failed\n"; + --- /dev/null 2003-12-21 17:51:51.000000000 +0100 +++ dpkg-deb 2003-12-28 21:23:25.000000000 +0100 @@ -0,0 +1,82 @@ +#!/usr/bin/perl + +# +# Very simple dpkg-deb clone with just enough functionality to get +# `dpkg-cross -i' working on Solaris +# +# © Copyright 2003 by Geert Uytterhoeven <geert@linux-m68k.org> +# +# This file is subject to the terms and conditions of the GNU General Public +# License. +# + +$progname = $0; +$progname =~ s@^.*/@@g; + + +$args = join(' ', @ARGV); + +$arg = shift @ARGV or goto failed; +if ($arg eq '-f') { + # Get package name, version, or architecture + $archive = shift @ARGV or goto failed; + $field = shift @ARGV or goto failed; + ($package, $version, $architecture) = $archive =~ /(.*)_(.*)_(.*).deb/; + $package =~ s,.*/,,; + if ($field eq 'package') { + print "$package\n"; + exit(0); + } elsif ($field eq 'version') { + print "$version\n"; + exit(0); + } elsif ($field eq 'architecture') { + print "$architecture\n"; + exit(0); + } +} elsif ($arg eq '-e') { + # Extract the contents of control.tar.gz to a specified subdirectory + $archive = shift @ARGV or goto failed; + $dir = shift @ARGV or goto failed; + system("mkdir -p $dir && ar -p $archive control.tar.gz | (cd $dir && tar zxf - )"); + exit(0); +} elsif ($arg eq '--fsys-tarfile') { + # Extract the contents of data.tar.gz to stdout + $archive = shift @ARGV or goto failed; + system("ar -p $archive data.tar.gz | zcat"); + exit(0); +} elsif ($arg eq '-I') { + # Extract the control file to stdout + $archive = shift @ARGV or goto failed; + $name = shift @ARGV or goto failed; + system("ar -p $archive control.tar.gz | tar Ozxf - ./$name"); + exit(0); +} elsif ($arg eq '-b') { + $dir1 = shift @ARGV or goto failed; + $dir2 = shift @ARGV or goto failed; + # Extract package name and version from the control file + open(IN, "<$dir1/DEBIAN/control") or die; + $line = <IN>; + chomp($line); + ($package) = $line =~ /^Package: (.*)/; + $line = <IN>; + chomp($line); + ($version) = $line =~ /^Version: (.*)/; + close(IN); + $name = $package.'_'.$version.'_all.deb'; + $name =~ s/:/%3a/g; + # Create control.tar.gz + system("cd $dir1/DEBIAN && tar zcf ../../control.tar.gz ."); + system("cd $dir1 && rm -rf DEBIAN"); + # Create data.tar.gz + system("cd $dir1 && tar zcf ../data.tar.gz ."); + # Create debian-binary + system("echo '2.0' > $dir1/../debian-binary"); + # Build a new Debian package + system("cd $dir1/.. && ar -r $name debian-binary control.tar.gz data.tar.gz"); + system("mv $dir1/../$name $dir2/$name"); + exit(0); +} + +failed: +die "$progname $args: failed\n"; + Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: What toolchain for vr4181 2003-12-28 20:30 ` Geert Uytterhoeven @ 2004-01-07 6:42 ` Jan-Benedict Glaw 0 siblings, 0 replies; 6+ messages in thread From: Jan-Benedict Glaw @ 2004-01-07 6:42 UTC (permalink / raw) To: Linux-Mips [-- Attachment #1: Type: text/plain, Size: 882 bytes --] On Sun, 2003-12-28 21:30:17 +0100, Geert Uytterhoeven <geert@linux-m68k.org> wrote in message <Pine.GSO.4.21.0312282120390.2325-100000@waterleaf.sonytel.be>: > BTW, I'd still really like to have some scripts so I can install (from binary > or from sources) Debian binaries in my home dir on a Red Hat or Solaris box. > Wishful thinking? Well, 'dpkg-deb -x' does the unpacking, which should be enough for most of the simple packages. But I can't just come up with a "general" solution except... Hmmm. Maybe you can use debootstrap for this purpose. MfG, JBG -- Jan-Benedict Glaw jbglaw@lug-owl.de . +49-172-7608481 "Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg fuer einen Freien Staat voll Freier Bürger" | im Internet! | im Irak! ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA)); [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-01-07 6:42 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2003-10-08 16:49 What toolchain for vr4181 Jørg Ulrich Hansen 2003-10-09 8:30 ` Geert Uytterhoeven 2003-10-09 11:04 ` Jan-Benedict Glaw 2003-10-09 11:25 ` Geert Uytterhoeven 2003-12-28 20:30 ` Geert Uytterhoeven 2004-01-07 6:42 ` Jan-Benedict Glaw
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.