From: Kumar Gala <galak@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Subject: Please pull from 'for_paulus' branch
Date: Tue, 15 May 2007 17:20:24 -0500 (CDT) [thread overview]
Message-ID: <Pine.LNX.4.64.0705151715200.17092@localhost.localdomain> (raw)
Please pull from 'for_paulus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git for_paulus
These are fixes/cleanups intended for 2.6.22.
to receive the following updates:
arch/powerpc/boot/dts/kuroboxHD.dts | 44 +++++++------------
arch/powerpc/boot/dts/kuroboxHG.dts | 45 +++++++------------
arch/powerpc/boot/dts/lite5200.dts | 69 +++++++++++++++---------------
arch/powerpc/boot/dts/lite5200b.dts | 77 ++++++++++++++++------------------
arch/powerpc/boot/dts/mpc7448hpc2.dts | 72 ++++++++++++++-----------------
arch/powerpc/boot/dts/mpc8540ads.dts | 16 +++++++
arch/powerpc/boot/dts/mpc8541cds.dts | 16 +++++++
arch/powerpc/boot/dts/mpc8544ds.dts | 16 +++++++
arch/powerpc/boot/dts/mpc8548cds.dts | 16 +++++++
arch/powerpc/boot/dts/mpc8555cds.dts | 16 +++++++
arch/powerpc/boot/dts/mpc8560ads.dts | 18 +++++++
arch/powerpc/boot/dts/mpc8568mds.dts | 16 +++++++
arch/powerpc/kernel/cputable.c | 2
arch/powerpc/kernel/entry_32.S | 18 ++++++-
arch/powerpc/lib/rheap.c | 22 +++------
arch/powerpc/mm/hash_low_32.S | 18 ++++++-
arch/ppc/kernel/entry.S | 18 ++++++-
arch/ppc/mm/hashtable.S | 18 ++++++-
arch/ppc/syslib/pq2_sys.c | 36 ++++++++-------
drivers/char/watchdog/booke_wdt.c | 2
include/asm-powerpc/cputable.h | 6 ++
include/asm-powerpc/mpc8260.h | 6 +-
include/asm-powerpc/pmac_feature.h | 6 +-
include/asm-powerpc/tsi108_irq.h | 6 +-
include/asm-powerpc/tsi108_pci.h | 6 +-
include/asm-powerpc/unistd.h | 6 +-
26 files changed, 361 insertions(+), 230 deletions(-)
Becky Bruce (1):
[POWERPC] Change include protections to ASM_POWERPC
Dave Jiang (2):
[POWERPC] Fix comment in booke_wdt
[POWERPC] 85xx: Add device nodes for error reporting devices used by EDAC
James.Yang (1):
[POWERPC] Remove CPU_FTR_NEED_COHERENT for 7448.
Kumar Gala (4):
[POWERPC] Fix COMMON symbol warnings
[PPC] Fix COMMON symbol warnings
[POWERPC] 85xx: Add device nodes for error reporting devices used by EDAC
[POWERPC] Removed hardcoded phandles from dts
Morten Banzon (1):
[PPC] MCC2 missing in MPC826x device_list
Timur Tabi (1):
[POWERPC] Fix alignment problem in rh_alloc_align() with exact-sized blocks
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 157dc98..a983680 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -21,19 +21,16 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
*/
/ {
- linux,phandle = <1000>;
model = "KuroboxHD";
compatible = "linkstation";
#address-cells = <1>;
#size-cells = <1>;
cpus {
- linux,phandle = <2000>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,603e { /* Really 8241 */
- linux,phandle = <2100>;
device_type = "cpu";
reg = <0>;
clock-frequency = <bebc200>; /* Fixed by bootwrapper */
@@ -48,13 +45,11 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
};
memory {
- linux,phandle = <3000>;
device_type = "memory";
reg = <00000000 04000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
- linux,phandle = <4000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -69,38 +64,34 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
- linux,phandle = <4300>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
};
serial@80004500 {
- linux,phandle = <4511>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <5d08d88>;
current-speed = <2580>;
interrupts = <9 2>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
};
serial@80004600 {
- linux,phandle = <4512>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <5d08d88>;
current-speed = <e100>;
interrupts = <a 0>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
};
- pic@80040000 {
- linux,phandle = <4400>;
+ mpic: pic@80040000 {
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
@@ -111,7 +102,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
};
pci@fec00000 {
- linux,phandle = <4500>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
@@ -122,24 +112,24 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 11 - IRQ0 ETH */
- 5800 0 0 1 4400 0 1
- 5800 0 0 2 4400 1 1
- 5800 0 0 3 4400 2 1
- 5800 0 0 4 4400 3 1
+ 5800 0 0 1 &mpic 0 1
+ 5800 0 0 2 &mpic 1 1
+ 5800 0 0 3 &mpic 2 1
+ 5800 0 0 4 &mpic 3 1
/* IDSEL 12 - IRQ1 IDE0 */
- 6000 0 0 1 4400 1 1
- 6000 0 0 2 4400 2 1
- 6000 0 0 3 4400 3 1
- 6000 0 0 4 4400 0 1
+ 6000 0 0 1 &mpic 1 1
+ 6000 0 0 2 &mpic 2 1
+ 6000 0 0 3 &mpic 3 1
+ 6000 0 0 4 &mpic 0 1
/* IDSEL 14 - IRQ3 USB2.0 */
- 7000 0 0 1 4400 3 1
- 7000 0 0 2 4400 3 1
- 7000 0 0 3 4400 3 1
- 7000 0 0 4 4400 3 1
+ 7000 0 0 1 &mpic 3 1
+ 7000 0 0 2 &mpic 3 1
+ 7000 0 0 3 &mpic 3 1
+ 7000 0 0 4 &mpic 3 1
>;
};
};
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index 919eb29..5cf42dc 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -21,19 +21,16 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
*/
/ {
- linux,phandle = <1000>;
model = "KuroboxHG";
compatible = "linkstation";
#address-cells = <1>;
#size-cells = <1>;
cpus {
- linux,phandle = <2000>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,603e { /* Really 8241 */
- linux,phandle = <2100>;
device_type = "cpu";
reg = <0>;
clock-frequency = <fdad680>; /* Fixed by bootwrapper */
@@ -48,13 +45,11 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
};
memory {
- linux,phandle = <3000>;
device_type = "memory";
reg = <00000000 08000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
- linux,phandle = <4000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -69,38 +64,35 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
- linux,phandle = <4300>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
};
serial@80004500 {
- linux,phandle = <4511>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <7c044a8>;
current-speed = <2580>;
interrupts = <9 2>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
};
serial@80004600 {
- linux,phandle = <4512>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <7c044a8>;
current-speed = <e100>;
interrupts = <a 0>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
};
- pic@80040000 {
- linux,phandle = <4400>;
+ mpic: pic@80040000 {
+ interrupt-parent = <&mpic>;
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
@@ -111,7 +103,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
};
pci@fec00000 {
- linux,phandle = <4500>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
@@ -122,24 +113,24 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
- interrupt-parent = <4400>;
+ interrupt-parent = <&mpic>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 11 - IRQ0 ETH */
- 5800 0 0 1 4400 0 1
- 5800 0 0 2 4400 1 1
- 5800 0 0 3 4400 2 1
- 5800 0 0 4 4400 3 1
+ 5800 0 0 1 &mpic 0 1
+ 5800 0 0 2 &mpic 1 1
+ 5800 0 0 3 &mpic 2 1
+ 5800 0 0 4 &mpic 3 1
/* IDSEL 12 - IRQ1 IDE0 */
- 6000 0 0 1 4400 1 1
- 6000 0 0 2 4400 2 1
- 6000 0 0 3 4400 3 1
- 6000 0 0 4 4400 0 1
+ 6000 0 0 1 &mpic 1 1
+ 6000 0 0 2 &mpic 2 1
+ 6000 0 0 3 &mpic 3 1
+ 6000 0 0 4 &mpic 0 1
/* IDSEL 14 - IRQ3 USB2.0 */
- 7000 0 0 1 4400 3 1
- 7000 0 0 2 4400 3 1
- 7000 0 0 3 4400 3 1
- 7000 0 0 4 4400 3 1
+ 7000 0 0 1 &mpic 3 1
+ 7000 0 0 2 &mpic 3 1
+ 7000 0 0 3 &mpic 3 1
+ 7000 0 0 4 &mpic 3 1
>;
};
};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index e13ac6e..eae68ab 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -49,7 +49,7 @@
soc5200@f0000000 {
model = "fsl,mpc5200";
compatible = "mpc5200";
- revision = "" // from bootloader
+ revision = ""; // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
ranges = <0 f0000000 f0010000>;
@@ -62,13 +62,12 @@
reg = <200 38>;
};
- pic@500 {
+ mpc5200_pic: pic@500 {
// 5200 interrupts are encoded into two levels;
- linux,phandle = <500>;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
- compatible = "mpc5200-pic";
+ compatible = "mpc5200_pic";
reg = <500 80>;
built-in;
};
@@ -79,7 +78,7 @@
cell-index = <0>;
reg = <600 10>;
interrupts = <1 9 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
has-wdt;
};
@@ -89,7 +88,7 @@
cell-index = <1>;
reg = <610 10>;
interrupts = <1 a 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@620 { // General Purpose Timer
@@ -98,7 +97,7 @@
cell-index = <2>;
reg = <620 10>;
interrupts = <1 b 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@630 { // General Purpose Timer
@@ -107,7 +106,7 @@
cell-index = <3>;
reg = <630 10>;
interrupts = <1 c 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@640 { // General Purpose Timer
@@ -116,7 +115,7 @@
cell-index = <4>;
reg = <640 10>;
interrupts = <1 d 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@650 { // General Purpose Timer
@@ -125,7 +124,7 @@
cell-index = <5>;
reg = <650 10>;
interrupts = <1 e 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@660 { // General Purpose Timer
@@ -134,7 +133,7 @@
cell-index = <6>;
reg = <660 10>;
interrupts = <1 f 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@670 { // General Purpose Timer
@@ -143,7 +142,7 @@
cell-index = <7>;
reg = <670 10>;
interrupts = <1 10 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
@@ -151,7 +150,7 @@
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
mscan@900 {
@@ -159,7 +158,7 @@
compatible = "mpc5200-mscan";
cell-index = <0>;
interrupts = <2 11 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
reg = <900 80>;
};
@@ -168,7 +167,7 @@
compatible = "mpc5200-mscan";
cell-index = <1>;
interrupts = <2 12 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
reg = <980 80>;
};
@@ -176,14 +175,14 @@
compatible = "mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpio-wkup@c00 {
compatible = "mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
pci@0d00 {
@@ -194,13 +193,13 @@
compatible = "mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <c000 0 0 1 500 0 0 3
- c000 0 0 2 500 0 0 3
- c000 0 0 3 500 0 0 3
- c000 0 0 4 500 0 0 3>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
+ c000 0 0 2 &mpc5200_pic 0 0 3
+ c000 0 0 3 &mpc5200_pic 0 0 3
+ c000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
@@ -212,7 +211,7 @@
compatible = "mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
@@ -220,7 +219,7 @@
compatible = "mpc5200-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
bestcomm@1200 {
@@ -231,7 +230,7 @@
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 a 0 3 b 0
3 c 0 3 d 0 3 e 0 3 f 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
@@ -246,7 +245,7 @@
cell-index = <0>;
reg = <2000 100>;
interrupts = <2 1 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in ac97 mode example
@@ -256,7 +255,7 @@
// cell-index = <1>;
// reg = <2200 100>;
// interrupts = <2 2 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
// PSC3 in CODEC mode example
@@ -266,7 +265,7 @@
// cell-index = <2>;
// reg = <2400 100>;
// interrupts = <2 3 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
// PSC4 in uart mode example
@@ -276,7 +275,7 @@
// cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
// PSC5 in uart mode example
@@ -286,7 +285,7 @@
// cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
// PSC6 in spi mode example
@@ -296,7 +295,7 @@
// cell-index = <5>;
// reg = <2c00 100>;
// interrupts = <2 4 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
ethernet@3000 {
@@ -305,7 +304,7 @@
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
ata@3a00 {
@@ -313,7 +312,7 @@
compatible = "mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
i2c@3d00 {
@@ -322,7 +321,7 @@
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
@@ -332,7 +331,7 @@
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 00211b3..5185625 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -62,13 +62,12 @@
reg = <200 38>;
};
- pic@500 {
+ mpc5200_pic: pic@500 {
// 5200 interrupts are encoded into two levels;
- linux,phandle = <500>;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
- compatible = "mpc5200b-pic\0mpc5200-pic";
+ compatible = "mpc5200b-pic\0mpc5200_pic";
reg = <500 80>;
built-in;
};
@@ -79,7 +78,7 @@
cell-index = <0>;
reg = <600 10>;
interrupts = <1 9 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
has-wdt;
};
@@ -89,7 +88,7 @@
cell-index = <1>;
reg = <610 10>;
interrupts = <1 a 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@620 { // General Purpose Timer
@@ -98,7 +97,7 @@
cell-index = <2>;
reg = <620 10>;
interrupts = <1 b 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@630 { // General Purpose Timer
@@ -107,7 +106,7 @@
cell-index = <3>;
reg = <630 10>;
interrupts = <1 c 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@640 { // General Purpose Timer
@@ -116,7 +115,7 @@
cell-index = <4>;
reg = <640 10>;
interrupts = <1 d 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@650 { // General Purpose Timer
@@ -125,7 +124,7 @@
cell-index = <5>;
reg = <650 10>;
interrupts = <1 e 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@660 { // General Purpose Timer
@@ -134,7 +133,7 @@
cell-index = <6>;
reg = <660 10>;
interrupts = <1 f 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpt@670 { // General Purpose Timer
@@ -143,7 +142,7 @@
cell-index = <7>;
reg = <670 10>;
interrupts = <1 10 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
@@ -151,7 +150,7 @@
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
mscan@900 {
@@ -159,7 +158,7 @@
compatible = "mpc5200b-mscan\0mpc5200-mscan";
cell-index = <0>;
interrupts = <2 11 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
reg = <900 80>;
};
@@ -168,7 +167,7 @@
compatible = "mpc5200b-mscan\0mpc5200-mscan";
cell-index = <1>;
interrupts = <2 12 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
reg = <980 80>;
};
@@ -176,14 +175,14 @@
compatible = "mpc5200b-gpio\0mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
gpio-wkup@c00 {
compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
pci@0d00 {
@@ -194,18 +193,18 @@
compatible = "mpc5200b-pci\0mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
- c000 0 0 2 500 1 1 3
- c000 0 0 3 500 1 2 3
- c000 0 0 4 500 1 3 3
-
- c800 0 0 1 500 1 1 3 // 2nd slot
- c800 0 0 2 500 1 2 3
- c800 0 0 3 500 1 3 3
- c800 0 0 4 500 0 0 3>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ c000 0 0 2 &mpc5200_pic 1 1 3
+ c000 0 0 3 &mpc5200_pic 1 2 3
+ c000 0 0 4 &mpc5200_pic 1 3 3
+
+ c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ c800 0 0 2 &mpc5200_pic 1 2 3
+ c800 0 0 3 &mpc5200_pic 1 3 3
+ c800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
@@ -217,7 +216,7 @@
compatible = "mpc5200b-spi\0mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
@@ -225,7 +224,7 @@
compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
bestcomm@1200 {
@@ -236,7 +235,7 @@
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 a 0 3 b 0
3 c 0 3 d 0 3 e 0 3 f 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
@@ -251,7 +250,7 @@
cell-index = <0>;
reg = <2000 100>;
interrupts = <2 1 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in ac97 mode example
@@ -261,7 +260,7 @@
// cell-index = <1>;
// reg = <2200 100>;
// interrupts = <2 2 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
// PSC3 in CODEC mode example
@@ -271,7 +270,7 @@
// cell-index = <2>;
// reg = <2400 100>;
// interrupts = <2 3 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
// PSC4 in uart mode example
@@ -281,7 +280,7 @@
// cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
// PSC5 in uart mode example
@@ -291,7 +290,7 @@
// cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
// PSC6 in spi mode example
@@ -301,7 +300,7 @@
// cell-index = <5>;
// reg = <2c00 100>;
// interrupts = <2 4 0>;
- // interrupt-parent = <500>;
+ // interrupt-parent = <&mpc5200_pic>;
//};
ethernet@3000 {
@@ -310,7 +309,7 @@
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
ata@3a00 {
@@ -318,7 +317,7 @@
compatible = "mpc5200b-ata\0mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
};
i2c@3d00 {
@@ -327,7 +326,7 @@
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
@@ -337,7 +336,7 @@
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
- interrupt-parent = <500>;
+ interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 6fa3754..765c306 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -16,12 +16,10 @@
compatible = "mpc74xx";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells =<0>;
- linux,phandle = <200>;
PowerPC,7448@0 {
device_type = "cpu";
@@ -34,13 +32,11 @@
clock-frequency = <0>; // From U-Boot
bus-frequency = <0>; // From U-Boot
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 20000000 // DDR2 512M at 0
>;
};
@@ -55,7 +51,7 @@
bus-frequency = <0>;
i2c@7000 {
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
interrupts = <E 0>;
reg = <7000 400>;
device_type = "i2c";
@@ -66,18 +62,16 @@
device_type = "mdio";
compatible = "tsi-ethernet";
- ethernet-phy@6000 {
- linux,phandle = <6000>;
- interrupt-parent = <7400>;
+ phy8: ethernet-phy@6000 {
+ interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <6000 50>;
phy-id = <8>;
device_type = "ethernet-phy";
};
- ethernet-phy@6400 {
- linux,phandle = <6400>;
- interrupt-parent = <7400>;
+ phy9: ethernet-phy@6400 {
+ interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <6000 50>;
phy-id = <9>;
@@ -94,8 +88,8 @@
reg = <6000 200>;
address = [ 00 06 D2 00 00 01 ];
interrupts = <10 2>;
- interrupt-parent = <7400>;
- phy-handle = <6000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy8>;
};
ethernet@6600 {
@@ -107,8 +101,8 @@
reg = <6400 200>;
address = [ 00 06 D2 00 00 02 ];
interrupts = <11 2>;
- interrupt-parent = <7400>;
- phy-handle = <6400>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy9>;
};
serial@7808 {
@@ -117,7 +111,7 @@
reg = <7808 200>;
clock-frequency = <3f6b5a00>;
interrupts = <c 0>;
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
};
serial@7c08 {
@@ -126,11 +120,10 @@
reg = <7c08 200>;
clock-frequency = <3f6b5a00>;
interrupts = <d 0>;
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
};
- pic@7400 {
- linux,phandle = <7400>;
+ mpic: pic@7400 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
@@ -144,7 +137,6 @@
pci@1000 {
compatible = "tsi10x";
device_type = "pci";
- linux,phandle = <1000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -153,37 +145,37 @@
ranges = <02000000 0 e0000000 e0000000 0 1A000000
01000000 0 00000000 fa000000 0 00010000>;
clock-frequency = <7f28154>;
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
interrupts = <17 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
- 0800 0 0 1 1180 24 0
- 0800 0 0 2 1180 25 0
- 0800 0 0 3 1180 26 0
- 0800 0 0 4 1180 27 0
+ 0800 0 0 1 &RT0 24 0
+ 0800 0 0 2 &RT0 25 0
+ 0800 0 0 3 &RT0 26 0
+ 0800 0 0 4 &RT0 27 0
/* IDSEL 0x12 */
- 1000 0 0 1 1180 25 0
- 1000 0 0 2 1180 26 0
- 1000 0 0 3 1180 27 0
- 1000 0 0 4 1180 24 0
+ 1000 0 0 1 &RT0 25 0
+ 1000 0 0 2 &RT0 26 0
+ 1000 0 0 3 &RT0 27 0
+ 1000 0 0 4 &RT0 24 0
/* IDSEL 0x13 */
- 1800 0 0 1 1180 26 0
- 1800 0 0 2 1180 27 0
- 1800 0 0 3 1180 24 0
- 1800 0 0 4 1180 25 0
+ 1800 0 0 1 &RT0 26 0
+ 1800 0 0 2 &RT0 27 0
+ 1800 0 0 3 &RT0 24 0
+ 1800 0 0 4 &RT0 25 0
/* IDSEL 0x14 */
- 2000 0 0 1 1180 27 0
- 2000 0 0 2 1180 24 0
- 2000 0 0 3 1180 25 0
- 2000 0 0 4 1180 26 0
+ 2000 0 0 1 &RT0 27 0
+ 2000 0 0 2 &RT0 24 0
+ 2000 0 0 3 &RT0 25 0
+ 2000 0 0 4 &RT0 26 0
>;
- router@1180 {
- linux,phandle = <1180>;
+
+ RT0: router@1180 {
clock-frequency = <0>;
interrupt-controller;
device_type = "pic-router";
@@ -192,7 +184,7 @@
built-in;
big-endian;
interrupts = <17 2>;
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f261d64..d91e81c 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -48,6 +48,22 @@
reg = <e0000000 00100000>; // CCSRBAR 1M
bus-frequency = <0>;
+ memory-controller@2000 {
+ compatible = "fsl,8540-memory-controller";
+ reg = <2000 1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <2 2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8540-l2-cache-controller";
+ reg = <20000 1000>;
+ cache-line-size = <20>; // 32 bytes
+ cache-size = <40000>; // L2, 256K
+ interrupt-parent = <&mpic>;
+ interrupts = <0 2>;
+ };
+
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 5fdcb69..4f2c3af 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -48,6 +48,22 @@
reg = <e0000000 00100000>; // CCSRBAR 1M
bus-frequency = <0>;
+ memory-controller@2000 {
+ compatible = "fsl,8541-memory-controller";
+ reg = <2000 1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <2 2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8541-l2-cache-controller";
+ reg = <20000 1000>;
+ cache-line-size = <20>; // 32 bytes
+ cache-size = <40000>; // L2, 256K
+ interrupt-parent = <&mpic>;
+ interrupts = <0 2>;
+ };
+
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 6b08460..3033599 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -48,6 +48,22 @@
reg = <e0000000 00100000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled out by uboot.
+ memory-controller@2000 {
+ compatible = "fsl,8544-memory-controller";
+ reg = <2000 1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <2 2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8544-l2-cache-controller";
+ reg = <20000 1000>;
+ cache-line-size = <20>; // 32 bytes
+ cache-size = <40000>; // L2, 256K
+ interrupt-parent = <&mpic>;
+ interrupts = <0 2>;
+ };
+
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index b2b2200..ad96381 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -48,6 +48,22 @@
reg = <e0000000 00100000>; // CCSRBAR 1M
bus-frequency = <0>;
+ memory-controller@2000 {
+ compatible = "fsl,8548-memory-controller";
+ reg = <2000 1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <2 2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8548-l2-cache-controller";
+ reg = <20000 1000>;
+ cache-line-size = <20>; // 32 bytes
+ cache-size = <80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ interrupts = <0 2>;
+ };
+
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 68a4795..951ed92 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -48,6 +48,22 @@
reg = <e0000000 00100000>; // CCSRBAR 1M
bus-frequency = <0>;
+ memory-controller@2000 {
+ compatible = "fsl,8555-memory-controller";
+ reg = <2000 1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <2 2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8555-l2-cache-controller";
+ reg = <20000 1000>;
+ cache-line-size = <20>; // 32 bytes
+ cache-size = <40000>; // L2, 256K
+ interrupt-parent = <&mpic>;
+ interrupts = <0 2>;
+ };
+
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 1f2afe9..8068215 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -48,6 +48,22 @@
reg = <e0000000 00000200>;
bus-frequency = <13ab6680>;
+ memory-controller@2000 {
+ compatible = "fsl,8540-memory-controller";
+ reg = <2000 1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <2 2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8540-l2-cache-controller";
+ reg = <20000 1000>;
+ cache-line-size = <20>; // 32 bytes
+ cache-size = <40000>; // L2, 256K
+ interrupt-parent = <&mpic>;
+ interrupts = <0 2>;
+ };
+
mdio@24520 {
device_type = "mdio";
compatible = "gianfar";
@@ -110,7 +126,7 @@
#address-cells = <3>;
compatible = "85xx";
device_type = "pci";
- reg = <8000 400>;
+ reg = <8000 1000>;
clock-frequency = <3f940aa>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 948a3b6..a123ec9 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -57,6 +57,22 @@
reg = <e0000000 00100000>;
bus-frequency = <0>;
+ memory-controller@2000 {
+ compatible = "fsl,8568-memory-controller";
+ reg = <2000 1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <2 2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8568-l2-cache-controller";
+ reg = <20000 1000>;
+ cache-line-size = <20>; // 32 bytes
+ cache-size = <80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ interrupts = <0 2>;
+ };
+
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 9cb24d2..6ef87fb 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -836,7 +836,7 @@ static struct cpu_spec cpu_specs[] = {
.pvr_mask = 0xffff0000,
.pvr_value = 0x80040000,
.cpu_name = "7448",
- .cpu_features = CPU_FTRS_7447A,
+ .cpu_features = CPU_FTRS_7448,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
.icache_bsize = 32,
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index c29d165..4074c0b 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -596,7 +596,11 @@ fast_exception_return:
mr r12,r4 /* restart at exc_exit_restart */
b 2b
- .comm fee_restarts,4
+ .section .bss
+ .align 2
+fee_restarts:
+ .space 4
+ .previous
/* aargh, a nonrecoverable interrupt, panic */
/* aargh, we don't know which trap this is */
@@ -851,7 +855,11 @@ load_dbcr0:
mtspr SPRN_DBSR,r11 /* clear all pending debug events */
blr
- .comm global_dbcr0,8
+ .section .bss
+ .align 4
+global_dbcr0:
+ .space 8
+ .previous
#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
do_work: /* r10 contains MSR_KERNEL here */
@@ -926,7 +934,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
/* shouldn't return */
b 4b
- .comm ee_restarts,4
+ .section .bss
+ .align 2
+ee_restarts:
+ .space 4
+ .previous
/*
* PROM code for specific machines follows. Put it
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index b2f6dcc..180ee29 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -468,25 +468,19 @@ unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, const ch
if (blk->size == size) {
/* Move from free list to taken list */
list_del(&blk->list);
- blk->owner = owner;
- start = blk->start;
-
- attach_taken_block(info, blk);
+ newblk = blk;
+ } else {
+ newblk = get_slot(info);
+ newblk->start = blk->start;
+ newblk->size = size;
- return start;
+ /* blk still in free list, with updated start, size */
+ blk->start += size;
+ blk->size -= size;
}
- newblk = get_slot(info);
- newblk->start = blk->start;
- newblk->size = size;
newblk->owner = owner;
-
- /* blk still in free list, with updated start, size */
- blk->start += size;
- blk->size -= size;
-
start = newblk->start;
-
attach_taken_block(info, newblk);
/* for larger alignment return fixed up pointer */
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index ddceefc..7f830a4 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -30,7 +30,11 @@
#include <asm/asm-offsets.h>
#ifdef CONFIG_SMP
- .comm mmu_hash_lock,4
+ .section .bss
+ .align 2
+ .globl mmu_hash_lock
+mmu_hash_lock:
+ .space 4
#endif /* CONFIG_SMP */
/*
@@ -455,9 +459,15 @@ found_slot:
sync /* make sure pte updates get to memory */
blr
- .comm next_slot,4
- .comm primary_pteg_full,4
- .comm htab_hash_searches,4
+ .section .bss
+ .align 2
+next_slot:
+ .space 4
+primary_pteg_full:
+ .space 4
+htab_hash_searches:
+ .space 4
+ .previous
/*
* Flush the entry for a particular page from the hash table.
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index ab64256..fba7ca1 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -596,7 +596,11 @@ fast_exception_return:
mr r12,r4 /* restart at exc_exit_restart */
b 2b
- .comm fee_restarts,4
+ .section .bss
+ .align 2
+fee_restarts:
+ .space 4
+ .previous
/* aargh, a nonrecoverable interrupt, panic */
/* aargh, we don't know which trap this is */
@@ -851,7 +855,11 @@ load_dbcr0:
mtspr SPRN_DBSR,r11 /* clear all pending debug events */
blr
- .comm global_dbcr0,8
+ .section .bss
+ .align 4
+global_dbcr0:
+ .space 8
+ .previous
#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
do_work: /* r10 contains MSR_KERNEL here */
@@ -926,4 +934,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
/* shouldn't return */
b 4b
- .comm ee_restarts,4
+ .section .bss
+ .align 2
+ee_restarts:
+ .space 4
+ .previous
diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S
index e756942..fc30b6f 100644
--- a/arch/ppc/mm/hashtable.S
+++ b/arch/ppc/mm/hashtable.S
@@ -30,7 +30,11 @@
#include <asm/asm-offsets.h>
#ifdef CONFIG_SMP
- .comm mmu_hash_lock,4
+ .section .bss
+ .align 2
+ .globl mmu_hash_lock
+mmu_hash_lock:
+ .space 4
#endif /* CONFIG_SMP */
/*
@@ -461,9 +465,15 @@ found_slot:
sync /* make sure pte updates get to memory */
blr
- .comm next_slot,4
- .comm primary_pteg_full,4
- .comm htab_hash_searches,4
+ .section .bss
+ .align 2
+next_slot:
+ .space 4
+primary_pteg_full:
+ .space 4
+htab_hash_searches:
+ .space 4
+ .previous
/*
* Flush the entry for a particular page from the hash table.
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
index f52600c..9c85300 100644
--- a/arch/ppc/syslib/pq2_sys.c
+++ b/arch/ppc/syslib/pq2_sys.c
@@ -26,7 +26,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1,
+ MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
}
},
@@ -39,7 +39,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
- MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2,
+ MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2,
MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
}
},
@@ -47,52 +47,56 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8260",
.mask = 0x0000ff00,
.value = 0x00000000,
- .num_devices = 12,
+ .num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1,
- MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
+ MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
+ MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+ MPC82xx_CPM_I2C,
}
},
{
.ppc_sys_name = "8264",
.mask = 0x0000ff00,
.value = 0x00000000,
- .num_devices = 12,
+ .num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1,
- MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
+ MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
+ MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+ MPC82xx_CPM_I2C,
}
},
{
.ppc_sys_name = "8265",
.mask = 0x0000ff00,
.value = 0x00000000,
- .num_devices = 12,
+ .num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1,
- MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
+ MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
+ MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+ MPC82xx_CPM_I2C,
}
},
{
.ppc_sys_name = "8266",
.mask = 0x0000ff00,
.value = 0x00000000,
- .num_devices = 12,
+ .num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1,
- MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
+ MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
+ MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+ MPC82xx_CPM_I2C,
}
},
/* below is a list of the 8272 family of processors */
@@ -159,7 +163,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1,
+ MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
},
},
@@ -172,7 +176,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1,
+ MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
},
},
diff --git a/drivers/char/watchdog/booke_wdt.c b/drivers/char/watchdog/booke_wdt.c
index 0e23f29..0f5c77d 100644
--- a/drivers/char/watchdog/booke_wdt.c
+++ b/drivers/char/watchdog/booke_wdt.c
@@ -24,7 +24,7 @@
#include <asm/uaccess.h>
#include <asm/system.h>
-/* If the kernel parameter wdt_enable=1, the watchdog will be enabled at boot.
+/* If the kernel parameter wdt=1, the watchdog will be enabled at boot.
* Also, the wdt_period sets the watchdog timer period timeout.
* For E500 cpus the wdt_period sets which bit changing from 0->1 will
* trigger a watchog timeout. This watchdog timeout will occur 3 times, the
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 4345249..82d595a 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -302,6 +302,12 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7448 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
+ CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+ CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_PPC_LE)
#define CPU_FTRS_82XX (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
#define CPU_FTRS_G2_LE (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h
index f1b83b0..e0d4807 100644
--- a/include/asm-powerpc/mpc8260.h
+++ b/include/asm-powerpc/mpc8260.h
@@ -5,8 +5,8 @@
* this one and the configuration switching is done here.
*/
#ifdef __KERNEL__
-#ifndef __ASM_PPC_MPC8260_H__
-#define __ASM_PPC_MPC8260_H__
+#ifndef __ASM_POWERPC_MPC8260_H__
+#define __ASM_POWERPC_MPC8260_H__
#ifdef CONFIG_8260
@@ -20,5 +20,5 @@
#endif
#endif /* CONFIG_8260 */
-#endif /* !__ASM_PPC_MPC8260_H__ */
+#endif /* !__ASM_POWERPC_MPC8260_H__ */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h
index d43d91b..26bcb0a 100644
--- a/include/asm-powerpc/pmac_feature.h
+++ b/include/asm-powerpc/pmac_feature.h
@@ -28,8 +28,8 @@
*/
#ifdef __KERNEL__
-#ifndef __PPC_ASM_PMAC_FEATURE_H
-#define __PPC_ASM_PMAC_FEATURE_H
+#ifndef __ASM_POWERPC_PMAC_FEATURE_H
+#define __ASM_POWERPC_PMAC_FEATURE_H
#include <asm/macio.h>
#include <asm/machdep.h>
@@ -393,5 +393,5 @@ extern u32 __iomem *uninorth_base;
#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
-#endif /* __PPC_ASM_PMAC_FEATURE_H */
+#endif /* __ASM_POWERPC_PMAC_FEATURE_H */
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h
index 3e4d04e..6ed9397 100644
--- a/include/asm-powerpc/tsi108_irq.h
+++ b/include/asm-powerpc/tsi108_irq.h
@@ -26,8 +26,8 @@
* demultiplexing on TSI108EMU/SVB boards.
*/
-#ifndef _ASM_PPC_TSI108_IRQ_H
-#define _ASM_PPC_TSI108_IRQ_H
+#ifndef _ASM_POWERPC_TSI108_IRQ_H
+#define _ASM_POWERPC_TSI108_IRQ_H
/*
* Tsi108 interrupts
@@ -121,4 +121,4 @@ typedef enum {
TSI108_IRQ_DIRECTED,
TSI108_IRQ_DISTRIBUTED,
} TSI108_IRQ_MODE;
-#endif /* _ASM_PPC_TSI108_IRQ_H */
+#endif /* _ASM_POWERPC_TSI108_IRQ_H */
diff --git a/include/asm-powerpc/tsi108_pci.h b/include/asm-powerpc/tsi108_pci.h
index a9f92f7..5653d7c 100644
--- a/include/asm-powerpc/tsi108_pci.h
+++ b/include/asm-powerpc/tsi108_pci.h
@@ -18,8 +18,8 @@
* MA 02111-1307 USA
*/
-#ifndef _ASM_PPC_TSI108_PCI_H
-#define _ASM_PPC_TSI108_PCI_H
+#ifndef _ASM_POWERPC_TSI108_PCI_H
+#define _ASM_POWERPC_TSI108_PCI_H
#include <asm/tsi108.h>
@@ -42,4 +42,4 @@ extern void tsi108_pci_int_init(struct device_node *node);
extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
extern void tsi108_clear_pci_cfg_error(void);
-#endif /* _ASM_PPC_TSI108_PCI_H */
+#endif /* _ASM_POWERPC_TSI108_PCI_H */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 21f004a..908dfe4 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_PPC_UNISTD_H_
-#define _ASM_PPC_UNISTD_H_
+#ifndef _ASM_POWERPC_UNISTD_H_
+#define _ASM_POWERPC_UNISTD_H_
/*
* This file contains the system call numbers.
@@ -381,4 +381,4 @@
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
-#endif /* _ASM_PPC_UNISTD_H_ */
+#endif /* _ASM_POWERPC_UNISTD_H_ */
next reply other threads:[~2007-05-15 22:24 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-15 22:20 Kumar Gala [this message]
2007-05-17 10:49 ` Please pull from 'for_paulus' branch Paul Mackerras
2007-05-17 12:05 ` Segher Boessenkool
2007-05-17 12:58 ` Kumar Gala
2007-05-17 13:00 ` Kumar Gala
2007-05-18 6:15 ` Paul Mackerras
2007-05-18 16:51 ` Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2007-07-23 21:01 Kumar Gala
2007-07-24 2:56 ` Kumar Gala
2007-07-25 6:43 ` Zang Roy-r61911
2007-07-10 5:42 Kumar Gala
2007-06-29 5:24 Kumar Gala
2007-06-29 6:26 ` Paul Mackerras
2007-06-29 7:04 ` Kumar Gala
2007-06-29 9:15 ` Segher Boessenkool
2007-06-29 9:31 ` Paul Mackerras
2007-06-29 9:51 ` Segher Boessenkool
2007-06-29 13:45 ` Arnd Bergmann
2007-06-29 14:44 ` Kumar Gala
2007-06-29 16:05 ` Arnd Bergmann
2007-06-29 16:09 ` Kumar Gala
2007-06-29 16:10 ` Kumar Gala
2007-06-29 15:22 ` Andreas Schwab
2007-06-30 6:57 ` Paul Mackerras
2007-06-30 8:10 ` Andreas Schwab
2007-06-30 8:14 ` Paul Mackerras
2007-06-30 8:49 ` Andreas Schwab
2007-06-30 10:57 ` Alan Modra
2007-02-17 22:38 Kumar Gala
2007-02-17 22:44 ` Kumar Gala
2007-02-13 22:16 Kumar Gala
2007-02-08 21:50 Kumar Gala
2007-02-08 21:52 ` Please pull from 'for_paulus' branch Kumar Gala
2007-02-07 7:51 Kumar Gala
2006-12-08 8:51 Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0705151715200.17092@localhost.localdomain \
--to=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.