* (no subject)
@ 2020-05-26 15:14 Qian Cai
2020-05-26 15:19 ` UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7 Qian Cai
0 siblings, 1 reply; 4+ messages in thread
From: Qian Cai @ 2020-05-26 15:14 UTC (permalink / raw)
To: Don Brace
Cc: Martin K. Petersen, Scott Teel, Kevin Barnett, esc.storagedev,
linux-scsi, linux-kernel
Bcc:
Subject: UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
Reply-To:
The commit 64ce60cab246 ("hpsa: correct skipping masked peripherals")
trigger an UBSAN warning below.
When i == 0 in hpsa_update_scsi_devices(),
for (i = 0; i < nphysicals + nlogicals + 1; i++) {
...
int phys_dev_index = i - (raid_ctlr_position == 0);
It ends up calling LUN[-1].
&physdev_list->LUN[phys_dev_index]
Should there by a test of underflow to set phys_dev_index == 0 in this case?
[ 118.395557][ T13] hpsa can't handle SMP requests
[ 118.444870][ T13] ================================================================================
[ 118.486725][ T13] UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
[ 118.521606][ T13] index -1 is out of range for type 'struct ext_report_lun_entry [1024]'
[ 118.559481][ T13] CPU: 0 PID: 13 Comm: kworker/0:1 Not tainted 5.7.0-rc6-next-20200522+ #3
[ 118.598179][ T13] Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018
[ 118.632882][ T13] Workqueue: events work_for_cpu_fn
[ 118.656492][ T13] Call Trace:
[ 118.670899][ T13] dump_stack+0x10b/0x17f
[ 118.690216][ T13] __ubsan_handle_out_of_bounds+0xd2/0x110
[ 118.712593][ T378] bnx2x 0000:41:00.1: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
[ 118.716249][ T13] hpsa_update_scsi_devices+0x28e3/0x2cc0 [hpsa]
[ 118.786774][ T13] hpsa_scan_start+0x228/0x260 [hpsa]
[ 118.810663][ T13] ? _raw_spin_unlock_irqrestore+0x6a/0x80
[ 118.836529][ T13] do_scsi_scan_host+0x8a/0x110
[ 118.858104][ T13] scsi_scan_host+0x222/0x280
[ 118.879287][ T13] ? hpsa_scsi_do_inquiry+0xcd/0xe0 [hpsa]
[ 118.907707][ T13] hpsa_init_one+0x1b79/0x27c0 [hpsa]
[ 118.934818][ T13] ? hpsa_find_device_by_sas_rphy+0xd0/0xd0 [hpsa]
[ 118.964279][ T13] local_pci_probe+0x82/0xe0
[ 118.985405][ T13] ? pci_name+0x70/0x70
[ 119.004244][ T13] work_for_cpu_fn+0x3a/0x60
[ 119.024672][ T13] process_one_work+0x49f/0x8f0
[ 119.046431][ T13] process_scheduled_works+0x72/0xa0
[ 119.069906][ T13] worker_thread+0x463/0x5b0
[ 119.090347][ T13] kthread+0x21d/0x240
[ 119.108531][ T13] ? pr_cont_work+0xa0/0xa0
[ 119.128450][ T13] ? __write_once_size+0x30/0x30
[ 119.150405][ T13] ret_from_fork+0x27/0x40
^ permalink raw reply [flat|nested] 4+ messages in thread* UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
2020-05-26 15:14 Qian Cai
@ 2020-05-26 15:19 ` Qian Cai
2020-05-28 13:46 ` Don.Brace
0 siblings, 1 reply; 4+ messages in thread
From: Qian Cai @ 2020-05-26 15:19 UTC (permalink / raw)
To: Don Brace
Cc: Martin K. Petersen, Scott Teel, Kevin Barnett, esc.storagedev,
linux-scsi, linux-kernel
Sorry, adding a missing subject line.
On Tue, May 26, 2020 at 11:14:16AM -0400, Qian Cai wrote:
> The commit 64ce60cab246 ("hpsa: correct skipping masked peripherals")
> trigger an UBSAN warning below.
>
> When i == 0 in hpsa_update_scsi_devices(),
>
> for (i = 0; i < nphysicals + nlogicals + 1; i++) {
> ...
> int phys_dev_index = i - (raid_ctlr_position == 0);
>
> It ends up calling LUN[-1].
>
> &physdev_list->LUN[phys_dev_index]
>
> Should there by a test of underflow to set phys_dev_index == 0 in this case?
>
> [ 118.395557][ T13] hpsa can't handle SMP requests
> [ 118.444870][ T13] ================================================================================
> [ 118.486725][ T13] UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
> [ 118.521606][ T13] index -1 is out of range for type 'struct ext_report_lun_entry [1024]'
> [ 118.559481][ T13] CPU: 0 PID: 13 Comm: kworker/0:1 Not tainted 5.7.0-rc6-next-20200522+ #3
> [ 118.598179][ T13] Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018
> [ 118.632882][ T13] Workqueue: events work_for_cpu_fn
> [ 118.656492][ T13] Call Trace:
> [ 118.670899][ T13] dump_stack+0x10b/0x17f
> [ 118.690216][ T13] __ubsan_handle_out_of_bounds+0xd2/0x110
> [ 118.712593][ T378] bnx2x 0000:41:00.1: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
> [ 118.716249][ T13] hpsa_update_scsi_devices+0x28e3/0x2cc0 [hpsa]
> [ 118.786774][ T13] hpsa_scan_start+0x228/0x260 [hpsa]
> [ 118.810663][ T13] ? _raw_spin_unlock_irqrestore+0x6a/0x80
> [ 118.836529][ T13] do_scsi_scan_host+0x8a/0x110
> [ 118.858104][ T13] scsi_scan_host+0x222/0x280
> [ 118.879287][ T13] ? hpsa_scsi_do_inquiry+0xcd/0xe0 [hpsa]
> [ 118.907707][ T13] hpsa_init_one+0x1b79/0x27c0 [hpsa]
> [ 118.934818][ T13] ? hpsa_find_device_by_sas_rphy+0xd0/0xd0 [hpsa]
> [ 118.964279][ T13] local_pci_probe+0x82/0xe0
> [ 118.985405][ T13] ? pci_name+0x70/0x70
> [ 119.004244][ T13] work_for_cpu_fn+0x3a/0x60
> [ 119.024672][ T13] process_one_work+0x49f/0x8f0
> [ 119.046431][ T13] process_scheduled_works+0x72/0xa0
> [ 119.069906][ T13] worker_thread+0x463/0x5b0
> [ 119.090347][ T13] kthread+0x21d/0x240
> [ 119.108531][ T13] ? pr_cont_work+0xa0/0xa0
> [ 119.128450][ T13] ? __write_once_size+0x30/0x30
> [ 119.150405][ T13] ret_from_fork+0x27/0x40
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
2020-05-26 15:19 ` UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7 Qian Cai
@ 2020-05-28 13:46 ` Don.Brace
2020-05-28 14:38 ` Qian Cai
0 siblings, 1 reply; 4+ messages in thread
From: Don.Brace @ 2020-05-28 13:46 UTC (permalink / raw)
To: cai, don.brace
Cc: martin.petersen, scott.teel, kevin.barnett, esc.storagedev,
linux-scsi, linux-kernel
Working on this.
Can you send your configuration?
ssacli controller all show config detail
-----Original Message-----
From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Qian Cai
Sent: Tuesday, May 26, 2020 10:19 AM
To: Don Brace <don.brace@microsemi.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>; Scott Teel <scott.teel@microsemi.com>; Kevin Barnett <kevin.barnett@microsemi.com>; esc.storagedev@microsemi.com; linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
Sorry, adding a missing subject line.
On Tue, May 26, 2020 at 11:14:16AM -0400, Qian Cai wrote:
> The commit 64ce60cab246 ("hpsa: correct skipping masked peripherals")
> trigger an UBSAN warning below.
>
> When i == 0 in hpsa_update_scsi_devices(),
>
> for (i = 0; i < nphysicals + nlogicals + 1; i++) { ...
> int phys_dev_index = i - (raid_ctlr_position == 0);
>
> It ends up calling LUN[-1].
>
> &physdev_list->LUN[phys_dev_index]
>
> Should there by a test of underflow to set phys_dev_index == 0 in this case?
>
> [ 118.395557][ T13] hpsa can't handle SMP requests
> [ 118.444870][ T13] ================================================================================
> [ 118.486725][ T13] UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
> [ 118.521606][ T13] index -1 is out of range for type 'struct ext_report_lun_entry [1024]'
> [ 118.559481][ T13] CPU: 0 PID: 13 Comm: kworker/0:1 Not tainted 5.7.0-rc6-next-20200522+ #3
> [ 118.598179][ T13] Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018
> [ 118.632882][ T13] Workqueue: events work_for_cpu_fn
> [ 118.656492][ T13] Call Trace:
> [ 118.670899][ T13] dump_stack+0x10b/0x17f
> [ 118.690216][ T13] __ubsan_handle_out_of_bounds+0xd2/0x110
> [ 118.712593][ T378] bnx2x 0000:41:00.1: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
> [ 118.716249][ T13] hpsa_update_scsi_devices+0x28e3/0x2cc0 [hpsa]
> [ 118.786774][ T13] hpsa_scan_start+0x228/0x260 [hpsa]
> [ 118.810663][ T13] ? _raw_spin_unlock_irqrestore+0x6a/0x80
> [ 118.836529][ T13] do_scsi_scan_host+0x8a/0x110
> [ 118.858104][ T13] scsi_scan_host+0x222/0x280
> [ 118.879287][ T13] ? hpsa_scsi_do_inquiry+0xcd/0xe0 [hpsa]
> [ 118.907707][ T13] hpsa_init_one+0x1b79/0x27c0 [hpsa]
> [ 118.934818][ T13] ? hpsa_find_device_by_sas_rphy+0xd0/0xd0 [hpsa]
> [ 118.964279][ T13] local_pci_probe+0x82/0xe0
> [ 118.985405][ T13] ? pci_name+0x70/0x70
> [ 119.004244][ T13] work_for_cpu_fn+0x3a/0x60
> [ 119.024672][ T13] process_one_work+0x49f/0x8f0
> [ 119.046431][ T13] process_scheduled_works+0x72/0xa0
> [ 119.069906][ T13] worker_thread+0x463/0x5b0
> [ 119.090347][ T13] kthread+0x21d/0x240
> [ 119.108531][ T13] ? pr_cont_work+0xa0/0xa0
> [ 119.128450][ T13] ? __write_once_size+0x30/0x30
> [ 119.150405][ T13] ret_from_fork+0x27/0x40
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
2020-05-28 13:46 ` Don.Brace
@ 2020-05-28 14:38 ` Qian Cai
0 siblings, 0 replies; 4+ messages in thread
From: Qian Cai @ 2020-05-28 14:38 UTC (permalink / raw)
To: Don.Brace
Cc: don.brace, martin.petersen, scott.teel, kevin.barnett,
esc.storagedev, linux-scsi, linux-kernel
On Thu, May 28, 2020 at 01:46:02PM +0000, Don.Brace@microchip.com wrote:
> Working on this.
> Can you send your configuration?
> ssacli controller all show config detail
https://raw.githubusercontent.com/cailca/linux-mm/master/kcsan.config
# ssacli controller all show
Smart Array P246br in Slot 0 (Embedded) (sn: PDNLU0ALM8F03U)
>
> -----Original Message-----
> From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Qian Cai
> Sent: Tuesday, May 26, 2020 10:19 AM
> To: Don Brace <don.brace@microsemi.com>
> Cc: Martin K. Petersen <martin.petersen@oracle.com>; Scott Teel <scott.teel@microsemi.com>; Kevin Barnett <kevin.barnett@microsemi.com>; esc.storagedev@microsemi.com; linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
>
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Sorry, adding a missing subject line.
>
> On Tue, May 26, 2020 at 11:14:16AM -0400, Qian Cai wrote:
> > The commit 64ce60cab246 ("hpsa: correct skipping masked peripherals")
> > trigger an UBSAN warning below.
> >
> > When i == 0 in hpsa_update_scsi_devices(),
> >
> > for (i = 0; i < nphysicals + nlogicals + 1; i++) { ...
> > int phys_dev_index = i - (raid_ctlr_position == 0);
> >
> > It ends up calling LUN[-1].
> >
> > &physdev_list->LUN[phys_dev_index]
> >
> > Should there by a test of underflow to set phys_dev_index == 0 in this case?
> >
> > [ 118.395557][ T13] hpsa can't handle SMP requests
> > [ 118.444870][ T13] ================================================================================
> > [ 118.486725][ T13] UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7
> > [ 118.521606][ T13] index -1 is out of range for type 'struct ext_report_lun_entry [1024]'
> > [ 118.559481][ T13] CPU: 0 PID: 13 Comm: kworker/0:1 Not tainted 5.7.0-rc6-next-20200522+ #3
> > [ 118.598179][ T13] Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018
> > [ 118.632882][ T13] Workqueue: events work_for_cpu_fn
> > [ 118.656492][ T13] Call Trace:
> > [ 118.670899][ T13] dump_stack+0x10b/0x17f
> > [ 118.690216][ T13] __ubsan_handle_out_of_bounds+0xd2/0x110
> > [ 118.712593][ T378] bnx2x 0000:41:00.1: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
> > [ 118.716249][ T13] hpsa_update_scsi_devices+0x28e3/0x2cc0 [hpsa]
> > [ 118.786774][ T13] hpsa_scan_start+0x228/0x260 [hpsa]
> > [ 118.810663][ T13] ? _raw_spin_unlock_irqrestore+0x6a/0x80
> > [ 118.836529][ T13] do_scsi_scan_host+0x8a/0x110
> > [ 118.858104][ T13] scsi_scan_host+0x222/0x280
> > [ 118.879287][ T13] ? hpsa_scsi_do_inquiry+0xcd/0xe0 [hpsa]
> > [ 118.907707][ T13] hpsa_init_one+0x1b79/0x27c0 [hpsa]
> > [ 118.934818][ T13] ? hpsa_find_device_by_sas_rphy+0xd0/0xd0 [hpsa]
> > [ 118.964279][ T13] local_pci_probe+0x82/0xe0
> > [ 118.985405][ T13] ? pci_name+0x70/0x70
> > [ 119.004244][ T13] work_for_cpu_fn+0x3a/0x60
> > [ 119.024672][ T13] process_one_work+0x49f/0x8f0
> > [ 119.046431][ T13] process_scheduled_works+0x72/0xa0
> > [ 119.069906][ T13] worker_thread+0x463/0x5b0
> > [ 119.090347][ T13] kthread+0x21d/0x240
> > [ 119.108531][ T13] ? pr_cont_work+0xa0/0xa0
> > [ 119.128450][ T13] ? __write_once_size+0x30/0x30
> > [ 119.150405][ T13] ret_from_fork+0x27/0x40
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-05-28 14:38 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-26 15:14 Qian Cai
2020-05-26 15:19 ` UBSAN: array-index-out-of-bounds in drivers/scsi/hpsa.c:4421:7 Qian Cai
2020-05-28 13:46 ` Don.Brace
2020-05-28 14:38 ` Qian Cai
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.