* help: Leadtek DTV2000 DS
@ 2010-01-25 11:44 Gavin Ramm
2010-01-25 13:02 ` Antti Palosaari
2010-01-27 0:21 ` Antti Palosaari
0 siblings, 2 replies; 10+ messages in thread
From: Gavin Ramm @ 2010-01-25 11:44 UTC (permalink / raw)
To: linux-media
Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
The chipset are AF9015 + AF9013 and the tuner is TDA18211..
Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
Any help would be great.. im willing to test..
gav
_________________________________________________________________
View photos of singles in your area! Browse profiles for FREE
http://clk.atdmt.com/NMN/go/150855801/direct/01/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: help: Leadtek DTV2000 DS
2010-01-25 11:44 help: Leadtek DTV2000 DS Gavin Ramm
@ 2010-01-25 13:02 ` Antti Palosaari
2010-01-27 0:21 ` Antti Palosaari
1 sibling, 0 replies; 10+ messages in thread
From: Antti Palosaari @ 2010-01-25 13:02 UTC (permalink / raw)
To: Gavin Ramm; +Cc: linux-media
On 01/25/2010 01:44 PM, Gavin Ramm wrote:
> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>
> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>
> Any help would be great.. im willing to test..
Device USB ID is missing. Please send your lsusb output and I will add
new IDs.
Antti
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: help: Leadtek DTV2000 DS
2010-01-25 11:44 help: Leadtek DTV2000 DS Gavin Ramm
2010-01-25 13:02 ` Antti Palosaari
@ 2010-01-27 0:21 ` Antti Palosaari
2010-01-27 2:07 ` Gavin Ramm
1 sibling, 1 reply; 10+ messages in thread
From: Antti Palosaari @ 2010-01-27 0:21 UTC (permalink / raw)
To: Gavin Ramm; +Cc: linux-media
Terve Gavin,
On 01/25/2010 01:44 PM, Gavin Ramm wrote:
> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>
> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>
> Any help would be great.. im willing to test..
I added support for that device, could you test now?
http://linuxtv.org/hg/~anttip/af9015/
regards
Antti
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: help: Leadtek DTV2000 DS
2010-01-27 0:21 ` Antti Palosaari
@ 2010-01-27 2:07 ` Gavin Ramm
2010-01-27 6:22 ` Gavin Ramm
0 siblings, 1 reply; 10+ messages in thread
From: Gavin Ramm @ 2010-01-27 2:07 UTC (permalink / raw)
To: linux-media
----------------------------------------
> Date: Wed, 27 Jan 2010 02:21:32 +0200
> From: crope@iki.fi
> To: gavin_ramm@hotmail.com
> CC: linux-media@vger.kernel.org
> Subject: Re: help: Leadtek DTV2000 DS
>
> Terve Gavin,
>
> On 01/25/2010 01:44 PM, Gavin Ramm wrote:
>> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
>> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>>
>> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
>> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>>
>> Any help would be great.. im willing to test..
>
> I added support for that device, could you test now?
> http://linuxtv.org/hg/~anttip/af9015/
>
> regards
> Antti
> --
> http://palosaari.fi/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
It now finds the card and creates frontends.. When I tried to tune within mythtv it couldn't find any channels.
It could be the my arial though, I'll have to check after work (i did a quick test in my lunch break)
gav
_________________________________________________________________
Shopping Trolley Mechanic If It Exists, You'll Find it on SEEK
http://clk.atdmt.com/NMN/go/157639755/direct/01/
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: help: Leadtek DTV2000 DS
2010-01-27 2:07 ` Gavin Ramm
@ 2010-01-27 6:22 ` Gavin Ramm
2010-01-27 6:33 ` Gavin Ramm
0 siblings, 1 reply; 10+ messages in thread
From: Gavin Ramm @ 2010-01-27 6:22 UTC (permalink / raw)
To: linux-media
----------------------------------------
> From: gavin_ramm@hotmail.com
> To: linux-media@vger.kernel.org
> Subject: RE: help: Leadtek DTV2000 DS
> Date: Wed, 27 Jan 2010 13:07:49 +1100
>
>
>
>
> ----------------------------------------
>> Date: Wed, 27 Jan 2010 02:21:32 +0200
>> From: crope@iki.fi
>> To: gavin_ramm@hotmail.com
>> CC: linux-media@vger.kernel.org
>> Subject: Re: help: Leadtek DTV2000 DS
>>
>> Terve Gavin,
>>
>> On 01/25/2010 01:44 PM, Gavin Ramm wrote:
>>> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
>>> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>>>
>>> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
>>> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>>>
>>> Any help would be great.. im willing to test..
>>
>> I added support for that device, could you test now?
>> http://linuxtv.org/hg/~anttip/af9015/
>>
>> regards
>> Antti
>> --
>> http://palosaari.fi/
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> It now finds the card and creates frontends.. When I tried to tune within mythtv it couldn't find any channels.
>
> It could be the my arial though, I'll have to check after work (i did a quick test in my lunch break)
>
> gav
> _________________________________________________________________
> Shopping Trolley Mechanic If It Exists, You'll Find it on SEEK
> http://clk.atdmt.com/NMN/go/157639755/direct/01/--
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
I did a mythtv scan again with a booster in and didn't get any channel lock..
used the scan util and got the following output.
-----output start-----
@localhost mythtv]# scan /usr/share/dvb/dvb-t/au-Bendigo
scanning /usr/share/dvb/dvb-t/au-Bendigo
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 669500000 1 3 9 3 1 1 0
initial transponder 620500000 1 3 9 3 1 1 0
initial transponder 572500000 1 3 9 3 1 1 0
initial transponder 690500000 1 3 9 3 1 1 0
initial transponder 655500000 1 3 9 3 1 1 0
initial transponder 555250000 1 3 9 3 1 1 0
initial transponder 576250000 1 3 9 3 1 1 0
initial transponder 592500000 1 3 9 3 1 1 0
initial transponder 618250000 1 3 9 3 1 1 0
initial transponder 529500000 1 2 9 3 1 2 0
initial transponder 634500000 1 2 9 3 1 2 0
initial transponder 534250000 1 2 9 3 1 2 0
initial transponder 676500000 1 3 9 3 1 1 0
initial transponder 571500000 1 3 9 3 1 1 0
initial transponder 536625000 1 3 9 3 1 1 0
initial transponder 585625000 1 3 9 3 1 1 0
initial transponder 564500000 1 3 9 3 1 1 0
initial transponder 543500000 1 3 9 3 1 1 0
initial transponder 536500000 1 3 9 3 1 1 0
initial transponder 529500000 1 3 9 3 1 1 0
initial transponder 205500000 1 3 9 3 1 1 0
initial transponder 564500000 1 3 9 3 1 1 0
initial transponder 536625000 1 3 9 3 1 1 0
initial transponder 690500000 1 3 9 3 1 1 0
initial transponder 711500000 1 3 9 3 1 1 0
initial transponder 550500000 1 3 9 3 1 1 0
>>> tune to: 669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
Network Name 'ABC Victoria'
0x0000 0x02b0: pmt_pid 0x0102 ABC -- ABC HDTV (running)
0x0000 0x02b1: pmt_pid 0x0100 ABC -- ABC1 (running)
0x0000 0x02b2: pmt_pid 0x0101 ABC -- ABC2 (running)
0x0000 0x02b3: pmt_pid 0x0103 ABC -- ABC1 (running)
0x0000 0x02b4: pmt_pid 0x0106 ABC -- ABC3 (running)
0x0000 0x02b6: pmt_pid 0x0104 ABC -- ABC Dig Music (running)
0x0000 0x02b7: pmt_pid 0x0105 ABC -- ABC Jazz (running)
>>> tune to: 620500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 620500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 572500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 572500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0803: pmt_pid 0x0120 Southern Cross Television -- SC10 Bendigo (running)
0x0000 0x0823: pmt_pid 0x051e Southern Cross Television -- One HD Bendigo (running)
0x0000 0x0843: pmt_pid 0x0528 Southern Cross Television -- SC Ten (running)
Network Name 'Southern Cross Television'
>>> tune to: 655500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 655500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 555250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 555250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 576250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 576250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 592500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 592500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 618250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 618250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
0x0000 0x0371: pmt_pid 0x0401 SBS -- SBS ONE (running)
0x0000 0x0375: pmt_pid 0x0400 SBS -- SBS HD (running)
0x0000 0x0372: pmt_pid 0x0402 SBS -- SBS TWO (running)
0x0000 0x0373: pmt_pid 0x0408 SBS -- SBS 3 (running)
0x0000 0x0374: pmt_pid 0x0409 SBS -- SBS 4 (running)
0x0000 0x037e: pmt_pid 0x0403 SBS -- SBS Radio 1 (running)
0x0000 0x037f: pmt_pid 0x0404 SBS -- SBS Radio 2 (running)
Network Name 'SBS VIC'
>>> tune to: 634500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 634500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 534250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 534250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 676500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 676500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 585625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 585625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 536500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 536500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0371: pmt_pid 0x0401 SBS -- SBS ONE (running)
0x0000 0x0375: pmt_pid 0x0400 SBS -- SBS HD (running)
0x0000 0x0372: pmt_pid 0x0402 SBS -- SBS TWO (running)
0x0000 0x0373: pmt_pid 0x0408 SBS -- SBS 3 (running)
0x0000 0x0374: pmt_pid 0x0409 SBS -- SBS 4 (running)
0x0000 0x037e: pmt_pid 0x0403 SBS -- SBS Radio 1 (running)
0x0000 0x037f: pmt_pid 0x0404 SBS -- SBS Radio 2 (running)
Network Name 'SBS VIC'
>>> tune to: 205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0803: pmt_pid 0x0120 Southern Cross Television -- SC10 Bendigo (running)
0x0000 0x0823: pmt_pid 0x051e Southern Cross Television -- One HD Bendigo (running)
0x0000 0x0843: pmt_pid 0x0528 Southern Cross Television -- SC Ten (running)
Network Name 'Southern Cross Television'
>>> tune to: 711500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0001: pmt_pid 0x00fb WIN Television -- WIN Bendigo (running)
0x0000 0x0002: pmt_pid 0x010f WIN Television -- GO Bendigo (running)
0x0000 0x000a: pmt_pid 0x0123 WIN Television -- WIN Bendigo HD (running)
Network Name 'WIN Digital '
>>> tune to: 550500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0950: pmt_pid 0x011c PRIME -- PRIME Bendigo (running)
0x0000 0x0974: pmt_pid 0x01cc PRIME -- PRIME HD (running)
0x0000 0x0975: pmt_pid 0x01cd PRIME -- PRIME View 1 (running)
0x0000 0x0976: pmt_pid 0x01ce PRIME -- 7TWO on PRIME (running)
0x0000 0x0977: pmt_pid 0x01cf PRIME -- PRIME View 3 (not running)
Network Name 'PRIME'
>>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 184500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 184500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
retrying with f=634625000
>>> tune to: 634625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 634625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 585500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 585500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
dumping lists (35 services)
ABC HDTV:669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:516:0:688
ABC1:669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:689
ABC2:669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:513:651:690
ABC1:669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:691
ABC3:669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:652:692
ABC Dig Music:669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:690:694
ABC Jazz:669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:700:695
SC10 Bendigo:690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:289:290:2051
One HD Bendigo:690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:1311:0:2083
SC Ten:690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:289:290:2115
SBS ONE:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:881
SBS TWO:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:162:83:882
SBS 3:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:883
SBS 4:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:884
SBS HD:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:102:103:885
SBS Radio 1:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:201:894
SBS Radio 2:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:202:895
SBS ONE:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:161:81:881
SBS TWO:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:162:83:882
SBS 3:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:161:81:883
SBS 4:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:161:81:884
SBS HD:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:102:103:885
SBS Radio 1:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:201:894
SBS Radio 2:529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:202:895
SC10 Bendigo:690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:289:290:2051
One HD Bendigo:690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:1311:0:2083
SC Ten:690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:289:290:2115
WIN Bendigo:711500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:501:651:1
GO Bendigo:711500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:521:671:2
WIN Bendigo HD:711500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:541:0:10
PRIME Bendigo:550500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:2840:2841:2384
PRIME HD:550500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:4600:0:2420
PRIME View 1:550500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:2840:2841:2421
7TWO on PRIME:550500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:4620:4621:2422
PRIME View 3:550500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:2840:2841:2423
Done.
-----end----
_________________________________________________________________
Shopping Trolley Mechanic If It Exists, You'll Find it on SEEK
http://clk.atdmt.com/NMN/go/157639755/direct/01/
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: help: Leadtek DTV2000 DS
2010-01-27 6:22 ` Gavin Ramm
@ 2010-01-27 6:33 ` Gavin Ramm
2010-01-27 10:54 ` Gavin Ramm
0 siblings, 1 reply; 10+ messages in thread
From: Gavin Ramm @ 2010-01-27 6:33 UTC (permalink / raw)
To: linux-media
----------------------------------------
> From: gavin_ramm@hotmail.com
> To: linux-media@vger.kernel.org
> Subject: RE: help: Leadtek DTV2000 DS
> Date: Wed, 27 Jan 2010 17:22:27 +1100
>
>
>
>
> ----------------------------------------
>> From: gavin_ramm@hotmail.com
>> To: linux-media@vger.kernel.org
>> Subject: RE: help: Leadtek DTV2000 DS
>> Date: Wed, 27 Jan 2010 13:07:49 +1100
>>
>>
>>
>>
>> ----------------------------------------
>>> Date: Wed, 27 Jan 2010 02:21:32 +0200
>>> From: crope@iki.fi
>>> To: gavin_ramm@hotmail.com
>>> CC: linux-media@vger.kernel.org
>>> Subject: Re: help: Leadtek DTV2000 DS
>>>
>>> Terve Gavin,
>>>
>>> On 01/25/2010 01:44 PM, Gavin Ramm wrote:
>>>> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
>>>> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>>>>
>>>> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
>>>> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>>>>
>>>> Any help would be great.. im willing to test..
>>>
>>> I added support for that device, could you test now?
>>> http://linuxtv.org/hg/~anttip/af9015/
>>>
I created a channels.conf via the output tried in xine and it worked.. tried in mythtv and it picked a few up only by importing the channels.conf. The auto scan in mythtv didn't work (which is out of scope i'd say)
_________________________________________________________________
Time for a new car? Sell your old one fast!
http://clk.atdmt.com/NMN/go/157637060/direct/01/
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: help: Leadtek DTV2000 DS
2010-01-27 6:33 ` Gavin Ramm
@ 2010-01-27 10:54 ` Gavin Ramm
2010-01-27 11:08 ` Gavin Ramm
0 siblings, 1 reply; 10+ messages in thread
From: Gavin Ramm @ 2010-01-27 10:54 UTC (permalink / raw)
To: linux-media
>>>
>>>
>>> ----------------------------------------
>>>> Date: Wed, 27 Jan 2010 02:21:32 +0200
>>>> From: crope@iki.fi
>>>> To: gavin_ramm@hotmail.com
>>>> CC: linux-media@vger.kernel.org
>>>> Subject: Re: help: Leadtek DTV2000 DS
>>>>
>>>> Terve Gavin,
>>>>
>>>> On 01/25/2010 01:44 PM, Gavin Ramm wrote:
>>>>> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
>>>>> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>>>>>
>>>>> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
>>>>> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>>>>>
>>>>> Any help would be great.. im willing to test..
>>>>
>>>> I added support for that device, could you test now?
>>>> http://linuxtv.org/hg/~anttip/af9015/
>>>>
>
>
> I created a channels.conf via the output tried in xine and it worked.. tried in mythtv and it picked a few up only by importing the channels.conf. The auto scan in mythtv didn't work (which is out of scope i'd say)
> _________________________________________________________________
The card is up and running within mythtv also, forgot i rebuilt the box and didn't change it back to Australian freq...
thanks alot for the help!!
gav
_________________________________________________________________
Time for a new car? Sell your old one fast!
http://clk.atdmt.com/NMN/go/157637060/direct/01/
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: help: Leadtek DTV2000 DS
2010-01-27 10:54 ` Gavin Ramm
@ 2010-01-27 11:08 ` Gavin Ramm
2010-01-27 11:30 ` Gavin Ramm
0 siblings, 1 reply; 10+ messages in thread
From: Gavin Ramm @ 2010-01-27 11:08 UTC (permalink / raw)
To: linux-media
>>>> ----------------------------------------
>>>>> Date: Wed, 27 Jan 2010 02:21:32 +0200
>>>>> From: crope@iki.fi
>>>>> To: gavin_ramm@hotmail.com
>>>>> CC: linux-media@vger.kernel.org
>>>>> Subject: Re: help: Leadtek DTV2000 DS
>>>>>
>>>>> Terve Gavin,
>>>>>
>>>>> On 01/25/2010 01:44 PM, Gavin Ramm wrote:
>>>>>> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
>>>>>> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>>>>>>
>>>>>> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
>>>>>> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>>>>>>
>>>>>> Any help would be great.. im willing to test..
>>>>>
>>>>> I added support for that device, could you test now?
>>>>> http://linuxtv.org/hg/~anttip/af9015/
>>>>>
>>
>>
>> I created a channels.conf via the output tried in xine and it worked.. tried in mythtv and it picked a few up only by importing the channels.conf. The auto scan in mythtv didn't work (which is out of scope i'd say)
>> _________________________________________________________________
>
>
> The card is up and running within mythtv also, forgot i rebuilt the box and didn't change it back to Australian freq...
>
> thanks alot for the help!!
>
> gav
> _________________________________________________________________
celebrated too soon!
the adpater0 works but all the other adapters1/2/3 do not find anything.
I've ran the identical "scan -a 1 /usr/share/dvb/dvb-t/au-Bendigo" on them all and only the first one works..
I've changed the physical arial cables also, this didn't help..
I have 2x of the cards installed.
-gav
_________________________________________________________________
Time for a new car? Sell your old one fast!
http://clk.atdmt.com/NMN/go/157637060/direct/01/
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: help: Leadtek DTV2000 DS
2010-01-27 11:08 ` Gavin Ramm
@ 2010-01-27 11:30 ` Gavin Ramm
2010-04-05 1:47 ` Gavin Ramm
0 siblings, 1 reply; 10+ messages in thread
From: Gavin Ramm @ 2010-01-27 11:30 UTC (permalink / raw)
To: linux-media
>>>>> ----------------------------------------
>>>>>> Date: Wed, 27 Jan 2010 02:21:32 +0200
>>>>>> From: crope@iki.fi
>>>>>> To: gavin_ramm@hotmail.com
>>>>>> CC: linux-media@vger.kernel.org
>>>>>> Subject: Re: help: Leadtek DTV2000 DS
>>>>>>
>>>>>> Terve Gavin,
>>>>>>
>>>>>> On 01/25/2010 01:44 PM, Gavin Ramm wrote:
>>>>>>> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
>>>>>>> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>>>>>>>
>>>>>>> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
>>>>>>> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>>>>>>>
>>>>>>> Any help would be great.. im willing to test..
>>>>>>
>>>>>> I added support for that device, could you test now?
>>>>>> http://linuxtv.org/hg/~anttip/af9015/
>>>>>>
>>>
>>>
>>> I created a channels.conf via the output tried in xine and it worked.. tried in mythtv and it picked a few up only by importing the channels.conf. The auto scan in mythtv didn't work (which is out of scope i'd say)
>>> _________________________________________________________________
>>
>>
>> The card is up and running within mythtv also, forgot i rebuilt the box and didn't change it back to Australian freq...
>>
>> thanks alot for the help!!
>>
>> gav
>> _________________________________________________________________
>
> celebrated too soon!
>
> the adpater0 works but all the other adapters1/2/3 do not find anything.
>
> I've ran the identical "scan -a 1 /usr/share/dvb/dvb-t/au-Bendigo" on them all and only the first one works..
>
> I've changed the physical arial cables also, this didn't help..
>
> I have 2x of the cards installed.
>
> -gav
> _________________________________________________________________
Ok first up sorry for the "spamming" of message..
I took an old card out that was also in the box.. rebooted my pc and now it looks like they're all working..
Tried via "scan -a 0 /usr/share/dvb/dvb-t/au-Bendigo" for 0 1 2 and 3 and they all got channels.
then tried on my mythfrontend and i could view channels on all adapters..
-gav
_________________________________________________________________
Search for properties that match your lifestyle! Start searching NOW!
http://clk.atdmt.com/NMN/go/157631292/direct/01/
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: help: Leadtek DTV2000 DS
2010-01-27 11:30 ` Gavin Ramm
@ 2010-04-05 1:47 ` Gavin Ramm
0 siblings, 0 replies; 10+ messages in thread
From: Gavin Ramm @ 2010-04-05 1:47 UTC (permalink / raw)
To: linux-media
Finally got back to my mythtv and found that the card isn't working 100%
what I've noticed.
1) Installed card run a LSMOD (shown below) did a scandvb -a 0 /usr/share/dvb-apps/dvb-t/au-Bendigo and scandvb -a 1 /usr/share/dvb-apps/dvb-t/au-Bendigo. The cards found all the channels and works.
lsmod Start
Module Size Used by
sunrpc 160130 1
ipv6 223810 30
dvb_usb_dib0700 51842 0
dib7000p 13813 1 dvb_usb_dib0700
dib0090 11198 1 dvb_usb_dib0700
dib7000m 11308 1 dvb_usb_dib0700
dib0070 6749 1 dvb_usb_dib0700
dib8000 21692 1 dvb_usb_dib0700
dib3000mc 9617 1 dvb_usb_dib0700
dibx000_common 2804 4 dib7000p,dib7000m,dib8000,dib3000mc
tda18271 43121 2
af9013 16098 2
nouveau 292109 2
ttm 40269 1 nouveau
dvb_usb_af9015 24958 0
drm_kms_helper 22251 1 nouveau
forcedeth 42741 0
dvb_usb 15013 2 dvb_usb_dib0700,dvb_usb_af9015
dvb_core 72883 3 dib7000p,dib8000,dvb_usb
drm 134966 4 nouveau,ttm,drm_kms_helper
i2c_algo_bit 4073 1 nouveau
i2c_nforce2 5575 0
i2c_core 21732 17 dvb_usb_dib0700,dib7000p,dib0090,dib7000m,dib0070,dib8000,dib3000mc,dibx000_common,tda18271,af9013,nouveau,dvb_usb_af9015,drm_kms_helper,dvb_usb,drm,i2c_algo_bit,i2c_nforce2
k8temp 2815 0
ata_generic 2399 0
pata_acpi 2303 0
sata_nv 16524 3
pata_amd 7613 0
lsmod finished
2) I then rebooted the computer and did a lsmod again (see below) i did another candvb -a 0 /usr/share/dvb-apps/dvb-t/au-Bendigo which worked but when i did candvb -a 1 /usr/share/dvb-apps/dvb-t/au-Bendigo it failed to find anything.. see the output of the dvbscan of the failed scan below.
I noticed in the first one the tda18271 is used 2 and in the second one its used 1 thats the only difference I see.
Module Size Used by
sunrpc 160130 1
ipv6 223810 30
dvb_usb_dib0700 51842 0
dib7000p 13813 1 dvb_usb_dib0700
dib0090 11198 1 dvb_usb_dib0700
dib7000m 11308 1 dvb_usb_dib0700
dib0070 6749 1 dvb_usb_dib0700
dib8000 21692 1 dvb_usb_dib0700
dib3000mc 9617 1 dvb_usb_dib0700
dibx000_common 2804 4 dib7000p,dib7000m,dib8000,dib3000mc
tda18271 43121 1
af9013 16098 2
nouveau 292109 2
ttm 40269 1 nouveau
dvb_usb_af9015 24958 0
dvb_usb 15013 2 dvb_usb_dib0700,dvb_usb_af9015
dvb_core 72883 3 dib7000p,dib8000,dvb_usb
drm_kms_helper 22251 1 nouveau
drm 134966 4 nouveau,ttm,drm_kms_helper
i2c_nforce2 5575 0
k8temp 2815 0
i2c_algo_bit 4073 1 nouveau
i2c_core 21732 17 dvb_usb_dib0700,dib7000p,dib0090,dib7000m,dib0070,dib8000,dib3000mc,dibx000_common,tda18271,af9013,nouveau,dvb_usb_af9015,dvb_usb,drm_kms_helper,drm,i2c_nforce2,i2c_algo_bit
forcedeth 42741 0
ata_generic 2399 0
pata_acpi 2303 0
pata_amd 7613 0
sata_nv 16524 3
dvbscan start
[mythtv@mythbackend ~]$ scandvb -a 1 /usr/share/dvb-apps/dvb-t/au-Bendigo
scanning /usr/share/dvb-apps/dvb-t/au-Bendigo
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
initial transponder 669500000 1 3 9 3 1 1 0
initial transponder 620500000 1 3 9 3 1 1 0
initial transponder 572500000 1 3 9 3 1 1 0
initial transponder 690500000 1 3 9 3 1 1 0
initial transponder 655500000 1 3 9 3 1 1 0
initial transponder 555250000 1 3 9 3 1 1 0
initial transponder 576250000 1 3 9 3 1 1 0
initial transponder 592500000 1 3 9 3 1 1 0
initial transponder 618250000 1 3 9 3 1 1 0
initial transponder 529500000 1 2 9 3 1 2 0
initial transponder 634500000 1 2 9 3 1 2 0
initial transponder 534250000 1 2 9 3 1 2 0
initial transponder 676500000 1 3 9 3 1 1 0
initial transponder 571500000 1 3 9 3 1 1 0
initial transponder 536625000 1 3 9 3 1 1 0
initial transponder 585625000 1 3 9 3 1 1 0
initial transponder 564500000 1 3 9 3 1 1 0
initial transponder 543500000 1 3 9 3 1 1 0
initial transponder 536500000 1 3 9 3 1 1 0
initial transponder 529500000 1 3 9 3 1 1 0
initial transponder 205500000 1 3 9 3 1 1 0
initial transponder 564500000 1 3 9 3 1 1 0
initial transponder 536625000 1 3 9 3 1 1 0
initial transponder 690500000 1 3 9 3 1 1 0
initial transponder 711500000 1 3 9 3 1 1 0
initial transponder 550500000 1 3 9 3 1 1 0
>>> tune to: 669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
^[[AWARNING:>>> tuning failed!!!
>>> tune to: 669500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 620500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 620500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 572500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 572500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 655500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 655500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 555250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 555250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 576250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 576250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 592500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 592500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 618250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 618250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 634500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 634500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 534250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 534250000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 676500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 676500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 585625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 585625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 543500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 536500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 536500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 529500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 205500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 564500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 536625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 690500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 711500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 711500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
>>> tune to: 550500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING:>>> tuning failed!!!
>>> tune to: 550500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)
WARNING:>>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
----------------------------------------
> From: gavin_ramm@hotmail.com
> To: linux-media@vger.kernel.org
> Subject: RE: help: Leadtek DTV2000 DS
> Date: Wed, 27 Jan 2010 22:30:07 +1100
>
>
>
>>>>>> ----------------------------------------
>>>>>>> Date: Wed, 27 Jan 2010 02:21:32 +0200
>>>>>>> From: crope@iki.fi
>>>>>>> To: gavin_ramm@hotmail.com
>>>>>>> CC: linux-media@vger.kernel.org
>>>>>>> Subject: Re: help: Leadtek DTV2000 DS
>>>>>>>
>>>>>>> Terve Gavin,
>>>>>>>
>>>>>>> On 01/25/2010 01:44 PM, Gavin Ramm wrote:
>>>>>>>> Tried the current build of v4l-dvb (as of 25/01/2010) for a Leadtek DTV2000 DS.
>>>>>>>> product site : http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=530&check=f
>>>>>>>>
>>>>>>>> The chipset are AF9015 + AF9013 and the tuner is TDA18211..
>>>>>>>> Im running it on mythdora 10.21 *fedora 10* i've had no luck with this.
>>>>>>>>
>>>>>>>> Any help would be great.. im willing to test..
>>>>>>>
>>>>>>> I added support for that device, could you test now?
>>>>>>> http://linuxtv.org/hg/~anttip/af9015/
>>>>>>>
>>>>
>>>>
>>>> I created a channels.conf via the output tried in xine and it worked.. tried in mythtv and it picked a few up only by importing the channels.conf. The auto scan in mythtv didn't work (which is out of scope i'd say)
>>>> _________________________________________________________________
>>>
>>>
>>> The card is up and running within mythtv also, forgot i rebuilt the box and didn't change it back to Australian freq...
>>>
>>> thanks alot for the help!!
>>>
>>> gav
>>> _________________________________________________________________
>>
>> celebrated too soon!
>>
>> the adpater0 works but all the other adapters1/2/3 do not find anything.
>>
>> I've ran the identical "scan -a 1 /usr/share/dvb/dvb-t/au-Bendigo" on them all and only the first one works..
>>
>> I've changed the physical arial cables also, this didn't help..
>>
>> I have 2x of the cards installed.
>>
>> -gav
>> _________________________________________________________________
>
> Ok first up sorry for the "spamming" of message..
>
> I took an old card out that was also in the box.. rebooted my pc and now it looks like they're all working..
>
> Tried via "scan -a 0 /usr/share/dvb/dvb-t/au-Bendigo" for 0 1 2 and 3 and they all got channels.
>
> then tried on my mythfrontend and i could view channels on all adapters..
>
> -gav
>
>
> _________________________________________________________________
> Search for properties that match your lifestyle! Start searching NOW!
> http://clk.atdmt.com/NMN/go/157631292/direct/01/
_________________________________________________________________
New, Used, Demo, Dealer or Private? Find it at CarPoint.com.au
http://clk.atdmt.com/NMN/go/206222968/direct/01/
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2010-04-05 1:53 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-01-25 11:44 help: Leadtek DTV2000 DS Gavin Ramm
2010-01-25 13:02 ` Antti Palosaari
2010-01-27 0:21 ` Antti Palosaari
2010-01-27 2:07 ` Gavin Ramm
2010-01-27 6:22 ` Gavin Ramm
2010-01-27 6:33 ` Gavin Ramm
2010-01-27 10:54 ` Gavin Ramm
2010-01-27 11:08 ` Gavin Ramm
2010-01-27 11:30 ` Gavin Ramm
2010-04-05 1:47 ` Gavin Ramm
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.