RE: Could we get 4.4.285-cip release? ([ANNOUNCE] 4.4.285-rt226 (fwd))

[<nobuhiro1.iwamatsu@toshiba.co.jp>]

Hi,

> -----Original Message-----
> From: Pavel Machek [mailto:pavel@denx.de]
> Sent: Friday, October 1, 2021 9:42 PM
> To: iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>; cip-dev@lists.cip-project.org
> Subject: Could we get 4.4.285-cip release? ([ANNOUNCE] 4.4.285-rt226 (fwd))
> 
> Hi!
> 
> 4.4.285-rt226 is out it would be good to make it into -cip-rt
> release. 

I think so.

> Would it be possible to create 4.4.285-cip release to make it
> easier?
> 

I will work on it immediately.

> Thanks and best regards,
> 								Pavel
> 

Best regards,
  Nobuhiro

> ----- Forwarded message from Daniel Wagner <wagi@monom.org> -----
> 
> Date: Fri, 01 Oct 2021 08:34:28 -0000
> From: Daniel Wagner <wagi@monom.org>
> To: LKML <linux-kernel@vger.kernel.org>, linux-rt-users <linux-rt-users@vger.kernel.org>, Steven
> 	Rostedt <rostedt@goodmis.org>, Thomas Gleixner <tglx@linutronix.de>, Carsten Emde
> 	<C.Emde@osadl.org>, John Kacur <jkacur@redhat.com>, Sebastian Andrzej Siewior
> 	<bigeasy@linutronix.de>, Tom Zanussi <tom.zanussi@linux.intel.com>, Clark Williams
> 	<williams@redhat.com>, Pavel Machek <pavel@denx.de>
> Subject: [ANNOUNCE] 4.4.285-rt226
> 
> Hello RT-list!
> 
> I'm pleased to announce the 4.4.285-rt226 stable release.
> 
> There are some futex changes in the RT code which were necessary
> because of the fuxex backports in v4.4.280. It took me a while to
> figure the merge conflicts and what needs to be changed in the
> futex/rtmutex patches. The v4.4 version of "Add the rtmutex rework"
> path is updated. The the locking rules changed, see the fixup patch
> for hb->lock and mutex->wait_lock.
> 
> Unfortunatly, I am not able to upload the patches to the usual places
> because I had to create a new gpg subkey as my old one expired. And
> now kup tells me my signature is invalid. I created a ed25519 signing
> key instead of a rsa one. Maybe this is what kup upsets. No idea and
> the security tools are helpful as always... NOT.
> 
> As I didn't want to delay the release even more I only pushed the
> changes to the git tree.
> 
> You can get this release via the git tree at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git
> 
>   branch: v4.4-rt
>   Head SHA1: b045f6da3d00b1423045781f9ec069827ea6a42a
> 
> Enjoy!
> Daniel
> 
> Changes from v4.4.277-rt224:
> ---
> 
> Adrian Bunk (1):
>       bnx2x: Fix enabling network interfaces without VFs
> 
> Alex Xu (Hello71) (1):
>       pipe: increase minimum default pipe size to 2 pages
> 
> Andreas Obergschwandtner (1):
>       ARM: tegra: tamonten: Fix UART pad setting
> 
> Andrew Morton (1):
>       mm/kmemleak.c: make cond_resched() rate-limiting more efficient
> 
> Andy Shevchenko (3):
>       PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
>       dmaengine: acpi-dma: check for 64-bit MMIO address
>       dmaengine: acpi: Avoid comparison GSI with Linux vIRQ
> 
> Anna-Maria Gleixner (1):
>       rcu: Update documentation of rcu_read_unlock()
> 
> Axel Lin (1):
>       regulator: rt5033: Fix n_voltages settings for BUCK and LDO
> 
> Ben Dooks (1):
>       ARM: 8918/2: only build return_address() if needed
> 
> Bob Peterson (1):
>       gfs2: Don't call dlm after protocol is unmounted
> 
> Christoph Hellwig (1):
>       cryptoloop: add a deprecation warning
> 
> Christophe JAILLET (2):
>       drm/msm/dsi: Fix some reference counted resource leaks
>       mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
> 
> Colin Ian King (2):
>       Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow
>       parport: remove non-zero check on count
> 
> Cyrill Gorcunov (1):
>       prctl: allow to setup brk for et_dyn executables
> 
> Damien Le Moal (1):
>       libata: fix ata_host_start()
> 
> Dan Carpenter (4):
>       bnx2x: fix an error code in bnx2x_nic_load()
>       Bluetooth: sco: prevent information leak in sco_conn_defer_accept()
>       ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()
>       thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
> 
> Daniel Wagner (5):
>       Merge tag 'v4.4.280' into v4.4-rt
>       futex: fixup wait_lock/pi_lock locking rule changes
>       Linux 4.4.280-rt225
>       Merge tag 'v4.4.285' into v4.4-rt
>       Linux 4.4.285-rt226
> 
> Daniele Palmas (1):
>       USB: serial: option: add Telit FD980 composition 0x1056
> 
> Dave Gerlach (1):
>       ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
> 
> David Bauer (1):
>       USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
> 
> David Heidelberg (1):
>       ARM: 9105/1: atags_to_fdt: don't warn about stack size
> 
> Denis Efremov (1):
>       Revert "floppy: reintroduce O_NDELAY fix"
> 
> Desmond Cheong Zhi Xi (5):
>       hfs: add missing clean-up in hfs_fill_super
>       hfs: fix high memory mapping in hfs_bnode_read
>       hfs: add lock nesting notation to hfs_find_init
>       Bluetooth: fix repeated calls to sco_sock_kill
>       Bluetooth: skip invalid hci_sync_conn_complete_evt
> 
> Ding Hui (1):
>       cifs: fix wrong release in sess_alloc_buffer() failed path
> 
> Dinghao Liu (2):
>       net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
>       qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom
> 
> Dmitry Osipenko (1):
>       rtc: tps65910: Correct driver module alias
> 
> Dongliang Mu (3):
>       ipack: tpci200: fix many double free issues in tpci200_pci_probe
>       media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init
>       media: dvb-usb: fix uninit-value in vp702x_read_mac_addr
> 
> Doug Anderson (1):
>       mmc: dw_mmc: Wait for data transfer after response errors.
> 
> Douglas Anderson (1):
>       mmc: dw_mmc: Fix occasional hang after tuning on eMMC
> 
> Eric Dumazet (3):
>       ipv4: make exception cache less predictible
>       net-caif: avoid user-triggerable WARN_ON(1)
>       net/af_unix: fix a data-race in unix_dgram_poll
> 
> Esben Haabendal (1):
>       net: ll_temac: Remove left-over debug message
> 
> Evgeny Novikov (1):
>       usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
> 
> Fangrui Song (1):
>       powerpc/boot: Delete unneeded .globl _zimage_start
> 
> Florian Fainelli (1):
>       r6040: Restore MDIO clock frequency after MAC reset
> 
> George Kennedy (1):
>       fbmem: add margin check to fb_check_caps()
> 
> Giovanni Cabiddu (1):
>       crypto: qat - do not ignore errors from enable_vf2pf_comms()
> 
> Goldwyn Rodrigues (1):
>       btrfs: mark compressed range uptodate only if all bio succeed
> 
> Greg Kroah-Hartman (10):
>       Linux 4.4.278
>       Revert "Bluetooth: Shutdown controller after workqueues are flushed or cancelled"
>       Linux 4.4.279
>       Linux 4.4.280
>       Linux 4.4.281
>       i2c: dev: zero out array used for i2c reads from userspace
>       Linux 4.4.283
>       serial: 8250_pci: make setup_port() parameters explicitly unsigned
>       Linux 4.4.284
>       Linux 4.4.285
> 
> Grygorii Strashko (1):
>       PM / wakeirq: Enable dedicated wakeirq for suspend
> 
> Guenter Roeck (2):
>       parisc: Move pci_dev_is_behind_card_dino to where it is used
>       drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV
> 
> Gustavo A. R. Silva (1):
>       ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()
> 
> H. Nikolaus Schaller (1):
>       mips: Fix non-POSIX regexp
> 
> Hans Verkuil (1):
>       media: videobuf2-core: dequeue if start_streaming fails
> 
> Hans de Goede (1):
>       libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
> 
> Harshvardhan Jha (1):
>       scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
> 
> Heiko Carstens (1):
>       s390/jump_label: print real address in a case of a jump label bug
> 
> Hoang Le (2):
>       tipc: fix sleeping in tipc accept routine
>       tipc: increase timeout in tipc_sk_enqueue()
> 
> Hui Su (1):
>       scripts/tracing: fix the bug that can't parse raw_trace_func
> 
> Ilya Leoshkevich (2):
>       s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
>       s390/bpf: Fix optimizing out zero-extensions
> 
> J. Bruce Fields (1):
>       rpc: fix gss_svc_init cleanup on failure
> 
> Jaehoon Chung (1):
>       mmc: dw_mmc: call the dw_mci_prep_stop_abort() by default
> 
> Jan Kiszka (1):
>       x86/asm: Ensure asm/proto.h can be included stand-alone
> 
> Jaroslav Kysela (1):
>       ALSA: hda - fix the 'Capture Switch' value change notifications
> 
> Javier Martinez Canillas (1):
>       usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
> 
> Jeff Layton (1):
>       ceph: lockdep annotations for try_nonblocking_invalidate
> 
> Jens Axboe (1):
>       net: split out functions related to registering inflight socket files
> 
> Jiapeng Chong (1):
>       mlx4: Fix missing error code in mlx4_load_one()
> 
> Jiri Slaby (2):
>       xtensa: ISS: don't panic in rs_init
>       hvsi: don't panic on tty_register_driver failure
> 
> Johan Almbladh (2):
>       bpf/tests: Fix copy-and-paste error in double word test
>       bpf/tests: Do not PASS tests without actually testing the result
> 
> Johan Hovold (2):
>       media: rtl28xxu: fix zero-length control request
>       Revert "USB: serial: ch341: fix character loss at high transfer rates"
> 
> Johannes Berg (1):
>       dmaengine: ioat: depends on !UML
> 
> Jonathan Cameron (1):
>       iio: dac: ad5624r: Fix incorrect handling of an optional regulator.
> 
> Jouni Malinen (5):
>       ath: Use safer key clearing with key cache entries
>       ath9k: Clear key cache explicitly on disabling hardware
>       ath: Export ath_hw_keysetmac()
>       ath: Modify ath_key_delete() to not need full key entry
>       ath9k: Postpone key cache entry deletion for TXQ frames reference it
> 
> Juergen Gross (1):
>       xen: fix setting of max_pfn in shared_info
> 
> Junxiao Bi (2):
>       ocfs2: fix zero out valid data
>       ocfs2: issue zeroout to EOF blocks
> 
> Kai-Heng Feng (1):
>       Bluetooth: Move shutdown callback before flushing tx and rx queue
> 
> Kelly Devilliv (1):
>       usb: host: fotg210: fix the actual_length of an iso packet
> 
> Krzysztof Kozlowski (2):
>       arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
>       power: supply: max17042: handle fails of reading status register
> 
> Krzysztof Wilczyński (1):
>       PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure
> 
> Len Baker (1):
>       CIFS: Fix a potencially linear read overflow
> 
> Letu Ren (1):
>       net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset
> 
> Li Jinlin (1):
>       blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
> 
> Li Manyi (1):
>       scsi: sr: Return correct event when media event code is 3
> 
> Lin, Zhenpeng (1):
>       dccp: don't duplicate ccid when cloning dccp sock
> 
> Linus Torvalds (1):
>       vt_kdsetmode: extend console locking
> 
> Linus Walleij (1):
>       clk: kirkwood: Fix a clocking boot regression
> 
> Liu Jian (1):
>       igmp: Add ip_mc_list lock in ip_check_mc_rcu
> 
> Longfang Liu (1):
>       USB:ehci:fix Kunpeng920 ehci hardware problem
> 
> Maciej W. Rozycki (3):
>       serial: 8250: Mask out floating 16/32-bit bus bits
>       MIPS: Malta: Do not byte-swap accesses to the CBUS UART
>       serial: 8250: Define RX trigger levels for OxSemi 950 devices
> 
> Maciej Żenczykowski (1):
>       usb: gadget: u_ether: fix a potential null pointer dereference
> 
> Marcelo Ricardo Leitner (3):
>       sctp: validate chunk size in __rcv_asconf_lookup
>       sctp: add param size validation for SCTP_PARAM_SET_PRIMARY
>       sctp: validate from_addr_param return
> 
> Marco Chiappero (1):
>       crypto: qat - fix reuse of completion variable
> 
> Marek Behún (2):
>       PCI: Call Max Payload Size-related fixup quirks early
>       PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported
> 
> Marek Marczykowski-Górecki (1):
>       PCI/MSI: Skip masking MSI-X on Xen PV
> 
> Martin KaFai Lau (1):
>       tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos
> 
> Mathias Nyman (1):
>       Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"
> 
> Mathieu Desnoyers (1):
>       ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2)
> 
> Matthew Wilcox (1):
>       lib/string.c: add multibyte memset functions
> 
> Mauro Carvalho Chehab (1):
>       media: uvc: don't do DMA on stack
> 
> Maxim Kiselev (1):
>       net: marvell: fix MVNETA_TX_IN_PRGRS bit number
> 
> Maxim Levitsky (1):
>       KVM: nSVM: avoid picking up unsupported bits from L2 in int_ctl (CVE-2021-3653)
> 
> Maximilian Heyne (1):
>       xen/events: Fix race in set_evtchn_to_irq
> 
> Michael Ellerman (1):
>       powerpc/module64: Fix comment in R_PPC64_ENTRY handling
> 
> Mike Galbraith (1):
>       futex: Handle transient "ownerless" rtmutex state correctly
> 
> Mike Rapoport (1):
>       x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
> 
> Miklos Szeredi (2):
>       af_unix: fix garbage collect vs MSG_PEEK
>       ovl: prevent private clone if bind mount is not allowed
> 
> Mikulas Patocka (1):
>       parisc: fix crash with signals and alloca
> 
> Miquel Raynal (1):
>       dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation
> 
> Muchun Song (1):
>       mm/page_alloc: speed up the iteration of max_order
> 
> Nadezda Lutovinova (1):
>       usb: gadget: mv_u3d: request_irq() after initializing UDC
> 
> Nanyong Sun (6):
>       nilfs2: fix memory leak in nilfs_sysfs_create_device_group
>       nilfs2: fix NULL pointer in nilfs_##name##_attr_release
>       nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
>       nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
>       nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
>       nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
> 
> Nathan Chancellor (1):
>       vmlinux.lds.h: Handle clang's module.{c,d}tor sections
> 
> Neeraj Upadhyay (1):
>       vringh: Use wiov->used to check for read/write desc order
> 
> Nguyen Dinh Phi (2):
>       cfg80211: Fix possible memory leak in function cfg80211_bss_update
>       tty: Fix data race between tiocsti() and flush_to_ldisc()
> 
> Ole Bjørn Midtbø (1):
>       Bluetooth: hidp: use correct wait queue when removing ctrl_wait
> 
> Pablo Neira Ayuso (1):
>       netfilter: nft_nat: allow to specify layer 4 protocol NAT only
> 
> Parav Pandit (1):
>       virtio: Improve vq->broken access to avoid any compiler optimization
> 
> Patryk Duda (1):
>       platform/chrome: cros_ec_proto: Send command again when timeout occurs
> 
> Paul Gortmaker (1):
>       x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions
> 
> Paul Jakma (1):
>       NIU: fix incorrect error return, missed in previous revert
> 
> Pavel Skripkin (13):
>       can: usb_8dev: fix memory leak
>       can: ems_usb: fix memory leak
>       can: esd_usb2: fix memory leak
>       net: llc: fix skb_over_panic
>       net: pegasus: fix uninit-value in get_interrupt_interval
>       net: vxge: fix use-after-free in vxge_device_unregister
>       net: 6pack: fix slab-out-of-bounds in decode_data
>       media: stkwebcam: fix memory leak in stk_camera_probe
>       m68k: emu: Fix invalid free in nfeth_cleanup()
>       media: go7007: remove redundant initialization
>       net: cipso: fix warnings in netlbl_cipsov4_add_std
>       Bluetooth: add timeout sanity check to hci_inquiry
>       profiling: fix shift-out-of-bounds bugs
> 
> Peter Ujfalusi (1):
>       dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
> 
> Peter Zijlstra (6):
>       futex: Cleanup refcounting
>       futex,rt_mutex: Introduce rt_mutex_init_waiter()
>       futex: Pull rt_mutex_futex_unlock() out from under hb->lock
>       futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
>       futex: Futex_unlock_pi() determinism
>       futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
> 
> Philipp Zabel (1):
>       tc358743: fix register i2c_rd/wr function fix
> 
> Prarit Bhargava (1):
>       alpha: Send stop IPI to send to online CPUs
> 
> Pravin B Shelar (1):
>       net: Fix zero-copy head len calculation.
> 
> Qu Wenruo (1):
>       Revert "btrfs: compression: don't try to compress if we don't have enough pages"
> 
> Rafael J. Wysocki (2):
>       PCI: PM: Enable PME if it can be signaled from D3cold
>       PCI: Use pci_update_current_state() in pci_enable_device_flags()
> 
> Randy Dunlap (6):
>       x86/tools: Fix objdump version check again
>       dccp: add do-while-0 stubs for dccp_pr_debug macros
>       xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
>       openrisc: don't printk() unconditionally
>       ptp: dp83640: don't define PAGE0
>       ARC: export clear_user_page() for modules
> 
> Russell King (1):
>       ARM: ensure the signal page contains defined contents
> 
> Sasha Levin (1):
>       Linux 4.4.282
> 
> Sasha Neftin (1):
>       e1000e: Fix the max snoop/no-snoop latency for 10M
> 
> Sean Anderson (2):
>       crypto: mxs-dcp - Check for DMA mapping errors
>       crypto: mxs-dcp - Use sg_mapping_iter to copy data
> 
> Sean Young (1):
>       media: rc-loopback: return number of emitters rather than error
> 
> Sebastian Krzyszkowiak (1):
>       power: supply: max17042_battery: fix typo in MAx17042_TOFF
> 
> Sergey Shtylyov (9):
>       i2c: highlander: add IRQ check
>       usb: gadget: udc: at91: add IRQ check
>       usb: phy: fsl-usb: add IRQ check
>       usb: phy: twl6030: add IRQ checks
>       usb: host: ohci-tmio: add IRQ check
>       usb: phy: tahvo: add IRQ check
>       i2c: iop3xx: fix deferred probing
>       i2c: s3c2410: fix IRQ check
>       i2c: mt65xx: fix IRQ check
> 
> Shai Malin (1):
>       qede: Fix memset corruption
> 
> Shreyansh Chouhan (1):
>       reiserfs: check directory items on read from disk
> 
> Sreekanth Reddy (1):
>       scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
> 
> Stefan Berger (1):
>       certs: Trigger creation of RSA module signing key if it's not an RSA key
> 
> Stefan Mätje (1):
>       can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
> 
> Stian Skjelstad (1):
>       udf_get_extendedattr() had no boundary checks.
> 
> Sudeep Holla (1):
>       ARM: dts: versatile: Fix up interrupt controller node names
> 
> Takashi Iwai (4):
>       r8152: Fix potential PM refcount imbalance
>       ALSA: seq: Fix racy deletion of subscriber
>       ASoC: intel: atom: Fix reference to PCM buffer address
>       ASoC: intel: atom: Fix breakage for PCM buffer address setup
> 
> Takeshi Misawa (1):
>       net: Fix memory leak in ieee802154_raw_deliver
> 
> Tetsuo Handa (2):
>       Bluetooth: defer cleanup of resources in hci_unregister_dev()
>       fbmem: don't allow too huge resolutions
> 
> Theodore Ts'o (1):
>       ext4: fix race writing to an inline_data file while its xattrs are changing
> 
> Thomas Gleixner (11):
>       futex: Rename free_pi_state() to put_pi_state()
>       rtmutex: Make wait_lock irq safe
>       futex: Avoid freeing an active timer
>       PCI/MSI: Enable and mask MSI-X early
>       PCI/MSI: Do not set invalid bits in MSI mask
>       PCI/MSI: Correct misleading comments
>       PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
>       PCI/MSI: Protect msi_desc::masked for multi-MSI
>       PCI/MSI: Mask all unused MSI-X entries
>       PCI/MSI: Enforce that MSI-X table entry is masked for update
>       PCI/MSI: Enforce MSI[X] entry updates to be visible
> 
> Thomas Hebb (1):
>       mmc: rtsx_pci: Fix long reads when clock is prescaled
> 
> Tianjia Zhang (1):
>       Smack: Fix wrong semantics in smk_access_entry()
> 
> Tom Rix (1):
>       USB: serial: mos7720: improve OOM-handling in read_mos_reg()
> 
> Tony Lindgren (4):
>       crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
>       mmc: dw_mmc: Fix issue with uninitialized dma_slave_config
>       mmc: moxart: Fix issue with uninitialized dma_slave_config
>       PM / wakeirq: Fix unbalanced IRQ enable for wakeirq
> 
> Tuo Li (1):
>       gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()
> 
> Vasily Gorbik (1):
>       s390/disassembler: correct disassembly lines alignment
> 
> Vincent Whitchurch (1):
>       mmc: dw_mmc: Fix hang on data CRC error
> 
> Vineet Gupta (1):
>       ARC: fix allnoconfig build warning
> 
> Wang Hai (4):
>       tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
>       sis900: Fix missing pci_disable_device() in probe and remove
>       net: natsemi: Fix missing pci_disable_device() in probe and remove
>       VMCI: fix NULL pointer dereference when unmapping queue pair
> 
> Willy Tarreau (1):
>       USB: serial: ch341: fix character loss at high transfer rates
> 
> Xie Yongji (1):
>       9p/trans_virtio: Remove sysfs file on probe failure
> 
> Xin Long (1):
>       sctp: move 198 addresses from unusable to private scope
> 
> Xiyu Yang (1):
>       net/l2tp: Fix reference count leak in l2tp_udp_recv_core
> 
> Yajun Deng (1):
>       netlink: Deal with ESRCH error in nlmsg_notify()
> 
> Yang Li (1):
>       ethtool: Fix an error code in cxgb2.c
> 
> Yang Yingliang (3):
>       workqueue: fix UAF in pwq_unbound_release_workfn()
>       net/802/mrp: fix memleak in mrp_request_join()
>       net/802/garp: fix memleak in garp_request_join()
> 
> Yoshihiro Shimoda (1):
>       net: renesas: sh_eth: Fix freeing wrong tx descriptor
> 
> Yu Kuai (2):
>       reiserfs: add check for root_inode in reiserfs_fill_super
>       dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
> 
> YueHaibing (1):
>       net: xilinx_emaclite: Do not print real IOMEM pointer
> 
> Zekun Shen (1):
>       ath9k: fix OOB read ar9300_eeprom_restore_internal
> 
> Zelin Deng (1):
>       KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
> 
> Zenghui Yu (1):
>       bcma: Fix memory leak for internally-handled cores
> 
> Zhen Lei (1):
>       pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
> 
> Zhengjun Zhang (1):
>       USB: serial: option: add new VID/PID to support Fibocom FG150
> 
> Zheyu Ma (6):
>       pcmcia: i82092: fix a null pointer dereference bug
>       video: fbdev: kyro: fix a DoS bug by restricting user input
>       tty: serial: jsm: hold port lock when reporting modem line changes
>       video: fbdev: asiliantfb: Error out if 'pixclock' equals zero
>       video: fbdev: kyro: Error out if 'pixclock' equals zero
>       video: fbdev: riva: Error out if 'pixclock' equals zero
> 
> Ziyang Xuan (1):
>       can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
> 
> Zubin Mithra (1):
>       ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
> 
> 王贇 (1):
>       net: fix NULL pointer reference in cipso_v4_doi_free
> 
> ----- End forwarded message -----
> 
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany