Some build issues with dovetail + ipipe 4.19

Some build issues with dovetail + ipipe 4.19

[Lange Norbert]

Hello,


By accident I built 4.19.152-cip37-x86-15 with the wip/dovetail branch. I understand that this should be supported one day?
In the hope that this is of use for you, I get built following errors during the modpost step with this config:

ERROR: "__rtdm_nrtsig_execute" [drivers/xenomai/testing/xeno_switchtest.ko] undefined!
ERROR: "__rtdm_nrtsig_execute" [drivers/xenomai/net/drivers/igb/rt_igb.ko] undefined!
ERROR: "pipeline_read_wallclock" [drivers/xenomai/net/drivers/igb/rt_igb.ko] undefined!

Mit besten Grüßen / Kind regards

NORBERT LANGE

AT-RD3

ANDRITZ HYDRO GmbH
Eibesbrunnergasse 20
1120 Vienna / AUSTRIA
p: +43 50805 56684
norbert.lange@andritz.com<mailto:norbert.lange@andritz.com>
andritz.com<http://www.andritz.com/>

________________________________

This message and any attachments are solely for the use of the intended recipients. They may contain privileged and/or confidential information or other information protected from disclosure. If you are not an intended recipient, you are hereby notified that you received this email in error and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system.

ANDRITZ HYDRO GmbH


Rechtsform/ Legal form: Gesellschaft mit beschränkter Haftung / Corporation

Firmensitz/ Registered seat: Wien

Firmenbuchgericht/ Court of registry: Handelsgericht Wien

Firmenbuchnummer/ Company registration: FN 61833 g

DVR: 0605077

UID-Nr.: ATU14756806


Thank You
________________________________

Re: Some build issues with dovetail + ipipe 4.19

[Jan Kiszka]

On 10.02.21 12:23, Lange Norbert via Xenomai wrote:
> Hello,
> 
> 
> By accident I built 4.19.152-cip37-x86-15 with the wip/dovetail branch. I understand that this should be supported one day?
> In the hope that this is of use for you, I get built following errors during the modpost step with this config:
> 
> ERROR: "__rtdm_nrtsig_execute" [drivers/xenomai/testing/xeno_switchtest.ko] undefined!
> ERROR: "__rtdm_nrtsig_execute" [drivers/xenomai/net/drivers/igb/rt_igb.ko] undefined!
> ERROR: "pipeline_read_wallclock" [drivers/xenomai/net/drivers/igb/rt_igb.ko] undefined!
> 

RTnet is off already in our CI for that reason, but switchtest I thought
would work. Anyway, all these need fixing.

Thanks for reporting,
Jan

-- 
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux