All of lore.kernel.org
 help / color / mirror / Atom feed
From: Feifei Wang <Feifei.Wang2@arm.com>
To: David Christensen <drc@linux.vnet.ibm.com>,
	"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, nd <nd@arm.com>,
	Ruifeng Wang <Ruifeng.Wang@arm.com>, nd <nd@arm.com>
Subject: Re: [dpdk-dev] [PATCH 3/3] ring: use element APIs to implement legacy APIs
Date: Wed, 8 Jul 2020 01:30:46 +0000	[thread overview]
Message-ID: <VI1PR08MB3023735D3D49063669EA6A69C8670@VI1PR08MB3023.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <72cff6f2-2110-ec27-a278-bdc60abff3e2@linux.vnet.ibm.com>

Hi, David

> -----Original Message-----
> From: David Christensen <drc@linux.vnet.ibm.com>
> Sent: 2020年7月8日 4:07
> To: Ananyev, Konstantin <konstantin.ananyev@intel.com>; Feifei Wang
> <Feifei.Wang2@arm.com>; Honnappa Nagarahalli
> <Honnappa.Nagarahalli@arm.com>
> Cc: dev@dpdk.org; nd <nd@arm.com>; Ruifeng Wang
> <Ruifeng.Wang@arm.com>
> Subject: Re: [PATCH 3/3] ring: use element APIs to implement legacy APIs
> 
> 
> 
> On 7/7/20 7:04 AM, Ananyev, Konstantin wrote:
> >
> > Hi Feifei,
> >
> >   > Hi, Konstantin, David
> >>
> >> I'm Feifei Wang from Arm. Sorry to make the following request:
> >> Would you please do some ring performance tests of this patch in your
> platforms at the time you are free?
> >> And I want to know whether this patch has a significant impact on other
> platforms except ARM.
> >
> > I run few tests on SKX box and so far didn’t notice any real perf difference.
> > Konstantin
> >
> 
Thanks very much for presenting these test results.  
Feifei
> Full performance results for IBM POWER9 system below.  I ran the tests
> twice for each version and the results were consistent.
> 
>                                       without this patch   with this patch
> Testing burst enq/deq
> legacy APIs: SP/SC: burst (size: 8):          43.63              43.63
> legacy APIs: SP/SC: burst (size: 32):         50.07              50.04
> legacy APIs: MP/MC: burst (size: 8):          58.43              58.42
> legacy APIs: MP/MC: burst (size: 32):         65.52              65.51
> Testing bulk enq/deq
> legacy APIs: SP/SC: bulk (size: 8):           43.61              43.61
> legacy APIs: SP/SC: bulk (size: 32):          50.05              50.02
> legacy APIs: MP/MC: bulk (size: 8):           58.43              58.43
> legacy APIs: MP/MC: bulk (size: 32):          65.50              65.49
> 
> HW:
> Architecture:        ppc64le
> Byte Order:          Little Endian
> CPU(s):              128
> On-line CPU(s) list: 0-127
> Thread(s) per core:  4
> Core(s) per socket:  16
> Socket(s):           2
> NUMA node(s):        6
> Model:               2.3 (pvr 004e 1203)
> Model name:          POWER9, altivec supported
> CPU max MHz:         3800.0000
> CPU min MHz:         2300.0000
> L1d cache:           32K
> L1i cache:           32K
> L2 cache:            512K
> L3 cache:            10240K
> NUMA node0 CPU(s):   0-63
> NUMA node8 CPU(s):   64-127
> 
> OS: RHEL 8.2
> 
> GCC: gcc version 8.3.1 20191121 (Red Hat 8.3.1-5) (GCC)
> 
> DPDK: 20.08.0-rc0 (a8550b773)
> 
> 
> 
> Unpatched
> ===========
> sudo app/test/dpdk-test -l 68,69
> EAL: Detected 128 lcore(s)
> EAL: Detected 2 NUMA nodes
> EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> EAL: Selected IOVA mode 'VA'
> EAL: No available hugepages reported in hugepages-2048kB
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: Probe PCI driver: net_mlx5 (15b3:1019) device: 0000:01:00.0 (socket 0)
> EAL: Probe PCI driver: net_mlx5 (15b3:1019) device: 0000:01:00.1 (socket 0)
> EAL: Probe PCI driver: net_mlx5 (15b3:1019) device: 0030:01:00.0 (socket 8)
> EAL: Probe PCI driver: net_mlx5 (15b3:1019) device: 0030:01:00.1 (socket 8)
> EAL:   using IOMMU type 7 (sPAPR)
> EAL: Probe PCI driver: net_i40e (8086:1583) device: 0034:01:00.0 (socket 8)
> EAL: Probe PCI driver: net_i40e (8086:1583) device: 0034:01:00.1 (socket 8)
> APP: HPET is not enabled, using TSC as default timer
> RTE>>ring_perf_autotest
> 
> ### Testing single element enq/deq ###
> legacy APIs: SP/SC: single: 42.01
> legacy APIs: MP/MC: single: 56.27
> 
> ### Testing burst enq/deq ###
> legacy APIs: SP/SC: burst (size: 8): 43.63 legacy APIs: SP/SC: burst (size: 32):
> 50.07 legacy APIs: MP/MC: burst (size: 8): 58.43 legacy APIs: MP/MC: burst
> (size: 32): 65.52
> 
> ### Testing bulk enq/deq ###
> legacy APIs: SP/SC: bulk (size: 8): 43.61 legacy APIs: SP/SC: bulk (size: 32):
> 50.05 legacy APIs: MP/MC: bulk (size: 8): 58.43 legacy APIs: MP/MC: bulk (size:
> 32): 65.50
> 
> ### Testing empty bulk deq ###
> legacy APIs: SP/SC: bulk (size: 8): 7.16 legacy APIs: MP/MC: bulk (size: 8): 7.16
> 
> ### Testing using two hyperthreads ###
> legacy APIs: SP/SC: bulk (size: 8): 12.44 legacy APIs: MP/MC: bulk (size: 8):
> 16.19 legacy APIs: SP/SC: bulk (size: 32): 3.10 legacy APIs: MP/MC: bulk (size:
> 32): 3.64
> 
> ### Testing using all slave nodes ###
> 
> Bulk enq/dequeue count on size 8
> Core [68] count = 362382
> Core [69] count = 362516
> Total count (size: 8): 724898
> 
> Bulk enq/dequeue count on size 32
> Core [68] count = 361565
> Core [69] count = 361852
> Total count (size: 32): 723417
> 
> ### Testing single element enq/deq ###
> elem APIs: element size 16B: SP/SC: single: 42.81 elem APIs: element size 16B:
> MP/MC: single: 56.78
> 
> ### Testing burst enq/deq ###
> elem APIs: element size 16B: SP/SC: burst (size: 8): 45.04 elem APIs: element
> size 16B: SP/SC: burst (size: 32): 59.27 elem APIs: element size 16B: MP/MC:
> burst (size: 8): 60.68 elem APIs: element size 16B: MP/MC: burst (size: 32):
> 75.00
> 
> ### Testing bulk enq/deq ###
> elem APIs: element size 16B: SP/SC: bulk (size: 8): 45.05 elem APIs: element
> size 16B: SP/SC: bulk (size: 32): 59.23 elem APIs: element size 16B: MP/MC:
> bulk (size: 8): 60.64 elem APIs: element size 16B: MP/MC: bulk (size: 32):
> 75.11
> 
> ### Testing empty bulk deq ###
> elem APIs: element size 16B: SP/SC: bulk (size: 8): 7.16 elem APIs: element
> size 16B: MP/MC: bulk (size: 8): 7.16
> 
> ### Testing using two hyperthreads ###
> elem APIs: element size 16B: SP/SC: bulk (size: 8): 12.15 elem APIs: element
> size 16B: MP/MC: bulk (size: 8): 15.55 elem APIs: element size 16B: SP/SC:
> bulk (size: 32): 3.22 elem APIs: element size 16B: MP/MC: bulk (size: 32): 3.86
> 
> ### Testing using all slave nodes ###
> 
> Bulk enq/dequeue count on size 8
> Core [68] count = 374327
> Core [69] count = 374433
> Total count (size: 8): 748760
> 
> Bulk enq/dequeue count on size 32
> Core [68] count = 324111
> Core [69] count = 320038
> Total count (size: 32): 644149
> Test OK
> 
> Patched
> =======
> $ sudo app/test/dpdk-test -l 68,69
> EAL: Detected 128 lcore(s)
> EAL: Detected 2 NUMA nodes
> EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> EAL: Selected IOVA mode 'VA'
> EAL: No available hugepages reported in hugepages-2048kB
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: Probe PCI driver: net_mlx5 (15b3:1019) device: 0000:01:00.0 (socket 0)
> EAL: Probe PCI driver: net_mlx5 (15b3:1019) device: 0000:01:00.1 (socket 0)
> EAL: Probe PCI driver: net_mlx5 (15b3:1019) device: 0030:01:00.0 (socket 8)
> EAL: Probe PCI driver: net_mlx5 (15b3:1019) device: 0030:01:00.1 (socket 8)
> EAL:   using IOMMU type 7 (sPAPR)
> EAL: Probe PCI driver: net_i40e (8086:1583) device: 0034:01:00.0 (socket 8)
> EAL: Probe PCI driver: net_i40e (8086:1583) device: 0034:01:00.1 (socket 8)
> APP: HPET is not enabled, using TSC as default timer
> RTE>>ring_perf_autotest
> 
> ### Testing single element enq/deq ###
> legacy APIs: SP/SC: single: 42.00
> legacy APIs: MP/MC: single: 56.27
> 
> ### Testing burst enq/deq ###
> legacy APIs: SP/SC: burst (size: 8): 43.63 legacy APIs: SP/SC: burst (size: 32):
> 50.04 legacy APIs: MP/MC: burst (size: 8): 58.42 legacy APIs: MP/MC: burst
> (size: 32): 65.51
> 
> ### Testing bulk enq/deq ###
> legacy APIs: SP/SC: bulk (size: 8): 43.61 legacy APIs: SP/SC: bulk (size: 32):
> 50.02 legacy APIs: MP/MC: bulk (size: 8): 58.43 legacy APIs: MP/MC: bulk (size:
> 32): 65.49
> 
> ### Testing empty bulk deq ###
> legacy APIs: SP/SC: bulk (size: 8): 7.16 legacy APIs: MP/MC: bulk (size: 8): 7.16
> 
> ### Testing using two hyperthreads ###
> legacy APIs: SP/SC: bulk (size: 8): 12.43 legacy APIs: MP/MC: bulk (size: 8):
> 16.17 legacy APIs: SP/SC: bulk (size: 32): 3.10 legacy APIs: MP/MC: bulk (size:
> 32): 3.65
> 
> ### Testing using all slave nodes ###
> 
> Bulk enq/dequeue count on size 8
> Core [68] count = 363208
> Core [69] count = 363334
> Total count (size: 8): 726542
> 
> Bulk enq/dequeue count on size 32
> Core [68] count = 361592
> Core [69] count = 361690
> Total count (size: 32): 723282
> 
> ### Testing single element enq/deq ###
> elem APIs: element size 16B: SP/SC: single: 42.78 elem APIs: element size 16B:
> MP/MC: single: 56.75
> 
> ### Testing burst enq/deq ###
> elem APIs: element size 16B: SP/SC: burst (size: 8): 45.04 elem APIs: element
> size 16B: SP/SC: burst (size: 32): 59.27 elem APIs: element size 16B: MP/MC:
> burst (size: 8): 60.66 elem APIs: element size 16B: MP/MC: burst (size: 32):
> 75.03
> 
> ### Testing bulk enq/deq ###
> elem APIs: element size 16B: SP/SC: bulk (size: 8): 45.04 elem APIs: element
> size 16B: SP/SC: bulk (size: 32): 59.33 elem APIs: element size 16B: MP/MC:
> bulk (size: 8): 60.65 elem APIs: element size 16B: MP/MC: bulk (size: 32):
> 75.04
> 
> ### Testing empty bulk deq ###
> elem APIs: element size 16B: SP/SC: bulk (size: 8): 7.16 elem APIs: element
> size 16B: MP/MC: bulk (size: 8): 7.16
> 
> ### Testing using two hyperthreads ###
> elem APIs: element size 16B: SP/SC: bulk (size: 8): 12.14 elem APIs: element
> size 16B: MP/MC: bulk (size: 8): 15.56 elem APIs: element size 16B: SP/SC:
> bulk (size: 32): 3.22 elem APIs: element size 16B: MP/MC: bulk (size: 32): 3.86
> 
> ### Testing using all slave nodes ###
> 
> Bulk enq/dequeue count on size 8
> Core [68] count = 372618
> Core [69] count = 372415
> Total count (size: 8): 745033
> 
> Bulk enq/dequeue count on size 32
> Core [68] count = 318784
> Core [69] count = 316066
> Total count (size: 32): 634850
> Test OK

  reply	other threads:[~2020-07-08  1:30 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03 10:26 [dpdk-dev] [PATCH 0/3] ring clean up Feifei Wang
2020-07-03 10:26 ` [dpdk-dev] [PATCH 1/3] ring: remove experimental tag for ring reset API Feifei Wang
2020-07-03 16:16   ` Kinsella, Ray
2020-07-03 18:46     ` Honnappa Nagarahalli
2020-07-06  6:23       ` Kinsella, Ray
2020-07-07  3:19         ` Feifei Wang
2020-07-07  7:40           ` Kinsella, Ray
2020-07-03 10:26 ` [dpdk-dev] [PATCH 2/3] ring: remove experimental tag for ring element APIs Feifei Wang
2020-07-03 16:17   ` Kinsella, Ray
2020-07-07 14:44   ` Ananyev, Konstantin
2020-07-03 10:26 ` [dpdk-dev] [PATCH 3/3] ring: use element APIs to implement legacy APIs Feifei Wang
2020-07-07  5:19   ` Feifei Wang
2020-07-07 14:04     ` Ananyev, Konstantin
2020-07-07 16:21       ` Honnappa Nagarahalli
2020-07-08  3:19         ` Feifei Wang
2020-07-07 20:07       ` David Christensen
2020-07-08  1:30         ` Feifei Wang [this message]
2020-07-08  1:21       ` Feifei Wang
2020-07-07 14:45   ` Ananyev, Konstantin
2020-07-08 14:51 ` [dpdk-dev] [PATCH 0/3] ring clean up David Marchand
2020-07-08 17:05   ` Ananyev, Konstantin
2020-07-08 20:33     ` Honnappa Nagarahalli
2020-07-09  2:27     ` Feifei Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=VI1PR08MB3023735D3D49063669EA6A69C8670@VI1PR08MB3023.eurprd08.prod.outlook.com \
    --to=feifei.wang2@arm.com \
    --cc=Honnappa.Nagarahalli@arm.com \
    --cc=Ruifeng.Wang@arm.com \
    --cc=dev@dpdk.org \
    --cc=drc@linux.vnet.ibm.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=nd@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.