All of lore.kernel.org
 help / color / mirror / Atom feed
* [RESEND] soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
@ 2020-11-26  8:31 Maulik Shah
  2020-11-26 17:42 ` Bjorn Andersson
  2020-11-26 19:50 ` patchwork-bot+linux-arm-msm
  0 siblings, 2 replies; 3+ messages in thread
From: Maulik Shah @ 2020-11-26  8:31 UTC (permalink / raw)
  To: andy.gross, bjorn.andersson
  Cc: linux-kernel, linux-arm-msm, dianders, swboyd, rnayak, ilina,
	lsrao, Maulik Shah

Use __fill_rpmh_msg API during rpmh_write(). This allows to
remove duplication of code in error checking, copying commands
and setting message state.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/soc/qcom/rpmh.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index ad1f062..01765ee 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -181,8 +181,6 @@ static int __rpmh_write(const struct device *dev, enum rpmh_state state,
 	struct cache_req *req;
 	int i;
 
-	rpm_msg->msg.state = state;
-
 	/* Cache the request in our store and link the payload */
 	for (i = 0; i < rpm_msg->msg.num_cmds; i++) {
 		req = cache_rpm_request(ctrlr, state, &rpm_msg->msg.cmds[i]);
@@ -190,8 +188,6 @@ static int __rpmh_write(const struct device *dev, enum rpmh_state state,
 			return PTR_ERR(req);
 	}
 
-	rpm_msg->msg.state = state;
-
 	if (state == RPMH_ACTIVE_ONLY_STATE) {
 		WARN_ON(irqs_disabled());
 		ret = rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msg->msg);
@@ -268,11 +264,9 @@ int rpmh_write(const struct device *dev, enum rpmh_state state,
 	DEFINE_RPMH_MSG_ONSTACK(dev, state, &compl, rpm_msg);
 	int ret;
 
-	if (!cmd || !n || n > MAX_RPMH_PAYLOAD)
-		return -EINVAL;
-
-	memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd));
-	rpm_msg.msg.num_cmds = n;
+	ret = __fill_rpmh_msg(&rpm_msg, state, cmd, n);
+	if (ret)
+		return ret;
 
 	ret = __rpmh_write(dev, state, &rpm_msg);
 	if (ret)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [RESEND] soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
  2020-11-26  8:31 [RESEND] soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write() Maulik Shah
@ 2020-11-26 17:42 ` Bjorn Andersson
  2020-11-26 19:50 ` patchwork-bot+linux-arm-msm
  1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2020-11-26 17:42 UTC (permalink / raw)
  To: Maulik Shah
  Cc: andy.gross, linux-kernel, linux-arm-msm, dianders, swboyd,
	rnayak, ilina, lsrao

On Thu 26 Nov 02:31 CST 2020, Maulik Shah wrote:

> Use __fill_rpmh_msg API during rpmh_write(). This allows to
> remove duplication of code in error checking, copying commands
> and setting message state.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> ---
>  drivers/soc/qcom/rpmh.c | 12 +++---------
>  1 file changed, 3 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
> index ad1f062..01765ee 100644
> --- a/drivers/soc/qcom/rpmh.c
> +++ b/drivers/soc/qcom/rpmh.c
> @@ -181,8 +181,6 @@ static int __rpmh_write(const struct device *dev, enum rpmh_state state,
>  	struct cache_req *req;
>  	int i;
>  
> -	rpm_msg->msg.state = state;
> -
>  	/* Cache the request in our store and link the payload */
>  	for (i = 0; i < rpm_msg->msg.num_cmds; i++) {
>  		req = cache_rpm_request(ctrlr, state, &rpm_msg->msg.cmds[i]);
> @@ -190,8 +188,6 @@ static int __rpmh_write(const struct device *dev, enum rpmh_state state,
>  			return PTR_ERR(req);
>  	}
>  
> -	rpm_msg->msg.state = state;
> -
>  	if (state == RPMH_ACTIVE_ONLY_STATE) {
>  		WARN_ON(irqs_disabled());
>  		ret = rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msg->msg);
> @@ -268,11 +264,9 @@ int rpmh_write(const struct device *dev, enum rpmh_state state,
>  	DEFINE_RPMH_MSG_ONSTACK(dev, state, &compl, rpm_msg);
>  	int ret;
>  
> -	if (!cmd || !n || n > MAX_RPMH_PAYLOAD)
> -		return -EINVAL;
> -
> -	memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd));
> -	rpm_msg.msg.num_cmds = n;
> +	ret = __fill_rpmh_msg(&rpm_msg, state, cmd, n);
> +	if (ret)
> +		return ret;
>  
>  	ret = __rpmh_write(dev, state, &rpm_msg);
>  	if (ret)
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [RESEND] soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
  2020-11-26  8:31 [RESEND] soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write() Maulik Shah
  2020-11-26 17:42 ` Bjorn Andersson
@ 2020-11-26 19:50 ` patchwork-bot+linux-arm-msm
  1 sibling, 0 replies; 3+ messages in thread
From: patchwork-bot+linux-arm-msm @ 2020-11-26 19:50 UTC (permalink / raw)
  To: Maulik Shah; +Cc: linux-arm-msm

Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Thu, 26 Nov 2020 14:01:30 +0530 you wrote:
> Use __fill_rpmh_msg API during rpmh_write(). This allows to
> remove duplication of code in error checking, copying commands
> and setting message state.
> 
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> ---
>  drivers/soc/qcom/rpmh.c | 12 +++---------
>  1 file changed, 3 insertions(+), 9 deletions(-)

Here is the summary with links:
  - [RESEND] soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
    https://git.kernel.org/qcom/c/0924dad5d458

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-11-26 19:50 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-26  8:31 [RESEND] soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write() Maulik Shah
2020-11-26 17:42 ` Bjorn Andersson
2020-11-26 19:50 ` patchwork-bot+linux-arm-msm

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.