* YAMON.
@ 2000-12-13 17:35 Nicu Popovici
2000-12-13 17:07 ` YAMON Brady Brown
0 siblings, 1 reply; 7+ messages in thread
From: Nicu Popovici @ 2000-12-13 17:35 UTC (permalink / raw)
To: linux-mips
Hello ,
Does anyone know how can I do to start a Linux on a mips board ( ATLAS )
without using YAMON. I just want to turn on the mips and to boot in
Linux . Is that possible ?
Regards,
Nicu
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: YAMON.
2000-12-13 17:35 YAMON Nicu Popovici
@ 2000-12-13 17:07 ` Brady Brown
2000-12-14 15:11 ` YAMON Nicu Popovici
0 siblings, 1 reply; 7+ messages in thread
From: Brady Brown @ 2000-12-13 17:07 UTC (permalink / raw)
To: Nicu Popovici; +Cc: linux-mips
Nicu Popovici wrote:
> Hello ,
>
> Does anyone know how can I do to start a Linux on a mips board ( ATLAS )
> without using YAMON. I just want to turn on the mips and to boot in
> Linux . Is that possible ?
>
> Regards,
> Nicu
It is possible. Look in Atlas Users Manual Sec 5.2 . Dip switch S1-1
controls booting from either Monitor Flash or System Flash. If you boot
from System Flash then the monitor is effectively removed. You would of
course have to have your own boot-up code, PCI enumerator, hardware init,
kernel loader, kernel image, etc. in the System Flash all hooked to the
reset vector for this to work.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brady Brown (bbrown@ti.com) Work:(801)619-6103
Texas Instruments: Broadband Access Group
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: YAMON.
2000-12-13 17:07 ` YAMON Brady Brown
@ 2000-12-14 15:11 ` Nicu Popovici
2000-12-14 17:10 ` YAMON Brady Brown
2003-02-22 8:55 ` YAMON Harald Koerfgen
0 siblings, 2 replies; 7+ messages in thread
From: Nicu Popovici @ 2000-12-14 15:11 UTC (permalink / raw)
To: Brady Brown; +Cc: linux-mips
Hello ,
Thanks . Now I have a much bigger problem. I have to try to start this ATLAS
board without a HDD and without ethernet. At reset it should give me a login
prompt which I have to see throught the console. Can anyone help me ?
Regards
Nicu
Brady Brown wrote:
> Nicu Popovici wrote:
>
> > Hello ,
> >
> > Does anyone know how can I do to start a Linux on a mips board ( ATLAS )
> > without using YAMON. I just want to turn on the mips and to boot in
> > Linux . Is that possible ?
> >
> > Regards,
> > Nicu
>
> It is possible. Look in Atlas Users Manual Sec 5.2 . Dip switch S1-1
> controls booting from either Monitor Flash or System Flash. If you boot
> from System Flash then the monitor is effectively removed. You would of
> course have to have your own boot-up code, PCI enumerator, hardware init,
> kernel loader, kernel image, etc. in the System Flash all hooked to the
> reset vector for this to work.
>
> --
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Brady Brown (bbrown@ti.com) Work:(801)619-6103
> Texas Instruments: Broadband Access Group
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: YAMON.
2000-12-14 15:11 ` YAMON Nicu Popovici
@ 2000-12-14 17:10 ` Brady Brown
2003-02-22 8:55 ` YAMON Harald Koerfgen
1 sibling, 0 replies; 7+ messages in thread
From: Brady Brown @ 2000-12-14 17:10 UTC (permalink / raw)
To: Nicu Popovici; +Cc: linux-mips
Nicu Popovici wrote:
> Hello ,
>
> Thanks . Now I have a much bigger problem. I have to try to start this ATLAS
> board without a HDD and without ethernet. At reset it should give me a login
> prompt which I have to see throught the console. Can anyone help me ?
One possibility: you basically need to write a kernel loader that lives in
Flash and is called at the very end of the boot-up code that replaces YAMON.
Additionally in flash is then a compressed kernel image and a compressed
file-system image. Your kernel loader inflates the kernel into RAM, then jumps
to the start of the kernel. The kernel then takes over. It is built to support
a ram-disk (size depending upon the size of your uncompressed file-system). So
the kernel inflates the file-system into the ram-disk and then mounts it as
root and continues with normal boot up. You can borrow much of the inflater
code within the kernel to generate the stand alone kernel loader. You will also
need to modify the ram-disk code so that it knows how to find the file-system
image in your flash. A fair bit of work, but certainly possible.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brady Brown (bbrown@ti.com) Work:(801)619-6103
Texas Instruments: Broadband Access Group
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: YAMON.
2000-12-14 15:11 ` YAMON Nicu Popovici
2000-12-14 17:10 ` YAMON Brady Brown
@ 2003-02-22 8:55 ` Harald Koerfgen
2000-12-15 16:51 ` YAMON Nicu Popovici
2001-08-14 5:54 ` help Sathish Vasudevaiah
1 sibling, 2 replies; 7+ messages in thread
From: Harald Koerfgen @ 2003-02-22 8:55 UTC (permalink / raw)
To: Nicu Popovici; +Cc: linux-mips, Brady Brown
On 14-Dec-00 Nicu Popovici wrote:
> Thanks . Now I have a much bigger problem. I have to try to start this ATLAS
> board without a HDD and without ethernet. At reset it should give me a login
> prompt which I have to see throught the console. Can anyone help me ?
The linux-vr tree has a nice feature called XIP (eXecute In Place). This allows
to prepare a kernel to run directly out of ROM.
http://linuxvr-org
if that's what you're looking for.
--
Regards,
Harald
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: YAMON.
2003-02-22 8:55 ` YAMON Harald Koerfgen
@ 2000-12-15 16:51 ` Nicu Popovici
2001-08-14 5:54 ` help Sathish Vasudevaiah
1 sibling, 0 replies; 7+ messages in thread
From: Nicu Popovici @ 2000-12-15 16:51 UTC (permalink / raw)
To: Harald Koerfgen; +Cc: linux-mips, Brady Brown
Hi Harald,
Thanks. In principle I want to do such a thing and to run linux from ROM if this
is possible and I saw that it is possible. Now I read the documentation and I hope
to manage to setup this kind of kernel.
Thanks again.
Nicu
Harald Koerfgen wrote:
> On 14-Dec-00 Nicu Popovici wrote:
> > Thanks . Now I have a much bigger problem. I have to try to start this ATLAS
> > board without a HDD and without ethernet. At reset it should give me a login
> > prompt which I have to see throught the console. Can anyone help me ?
>
> The linux-vr tree has a nice feature called XIP (eXecute In Place). This allows
> to prepare a kernel to run directly out of ROM.
>
> http://linuxvr-org
>
> if that's what you're looking for.
>
> --
> Regards,
> Harald
^ permalink raw reply [flat|nested] 7+ messages in thread
* help
2003-02-22 8:55 ` YAMON Harald Koerfgen
2000-12-15 16:51 ` YAMON Nicu Popovici
@ 2001-08-14 5:54 ` Sathish Vasudevaiah
1 sibling, 0 replies; 7+ messages in thread
From: Sathish Vasudevaiah @ 2001-08-14 5:54 UTC (permalink / raw)
To: linux-mips
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2001-08-14 6:03 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-12-13 17:35 YAMON Nicu Popovici
2000-12-13 17:07 ` YAMON Brady Brown
2000-12-14 15:11 ` YAMON Nicu Popovici
2000-12-14 17:10 ` YAMON Brady Brown
2003-02-22 8:55 ` YAMON Harald Koerfgen
2000-12-15 16:51 ` YAMON Nicu Popovici
2001-08-14 5:54 ` help Sathish Vasudevaiah
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.