[PATCH 5.15 000/132] 5.15.77-rc1 review

[PATCH 5.15 000/132] 5.15.77-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.15.77 release.
There are 132 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.77-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.15.77-rc1

Kuniyuki Iwashima <kuniyu@amazon.com>
    tcp/udp: Fix memory leak in ipv6_renew_options().

Lukas Wunner <lukas@wunner.de>
    serial: Deassert Transmit Enable on probe in driver-specific way

Lino Sanfilippo <LinoSanfilippo@gmx.de>
    serial: core: move RS485 configuration tasks from drivers into core

Biju Das <biju.das.jz@bp.renesas.com>
    can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive

Biju Das <biju.das.jz@bp.renesas.com>
    can: rcar_canfd: fix channel specific IRQ handling for RZ/G2L

Yu Kuai <yukuai3@huawei.com>
    scsi: sd: Revert "scsi: sd: Remove a local variable"

D Scott Phillips <scott@os.amperecomputing.com>
    arm64: Add AMPERE1 to the Spectre-BHB affected list

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: enetc: survive memory pressure without crashing

Eric Dumazet <edumazet@google.com>
    kcm: do not sense pfmemalloc status in kcm_sendpage()

Eric Dumazet <edumazet@google.com>
    net: do not sense pfmemalloc status in skb_append_pagefrags()

Suresh Devarakonda <ramad@nvidia.com>
    net/mlx5: Fix crash during sync firmware reset

Roy Novich <royno@nvidia.com>
    net/mlx5: Update fw fatal reporter state on PCI handlers successful recover

Saeed Mahameed <saeedm@nvidia.com>
    net/mlx5: Print more info on pci error handlers

Tariq Toukan <tariqt@nvidia.com>
    net/mlx5: Fix possible use-after-free in async command interface

Aya Levin <ayal@nvidia.com>
    net/mlx5e: Extend SKB room check to include PTP-SQ

Hyong Youb Kim <hyonkim@cisco.com>
    net/mlx5e: Do not increment ESN when updating IPsec ESN state

Zhengchao Shao <shaozhengchao@huawei.com>
    netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed

Rafał Miłecki <rafal@milecki.pl>
    net: broadcom: bcm4908_enet: update TX stats after actual transmission

Colin Ian King <colin.i.king@gmail.com>
    net: broadcom: bcm4908enet: remove redundant variable bytes

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    nh: fix scope used to find saddr when adding non gw nh

Florian Fainelli <f.fainelli@gmail.com>
    net: bcmsysport: Indicate MAC is in charge of PHY PM

Yang Yingliang <yangyingliang@huawei.com>
    net: ehea: fix possible memory leak in ehea_register_port()

Aaron Conole <aconole@redhat.com>
    openvswitch: switch from WARN to pr_warn

Takashi Iwai <tiwai@suse.de>
    ALSA: aoa: Fix I2S device accounting

Yang Yingliang <yangyingliang@huawei.com>
    ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()

Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
    net: ethernet: ave: Fix MAC to be in charge of PHY PM

Juergen Borleis <jbe@pengutronix.de>
    net: fec: limit register access on i.MX6UL

Shang XiaoJing <shangxiaojing@huawei.com>
    perf vendor events arm64: Fix incorrect Hisi hip08 L3 metrics

Sudeep Holla <sudeep.holla@arm.com>
    PM: domains: Fix handling of unavailable/disabled idle states

Yang Yingliang <yangyingliang@huawei.com>
    net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()

Slawomir Laba <slawomirx.laba@intel.com>
    i40e: Fix flow-type by setting GL_HASH_INSET registers

Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
    i40e: Fix VF hang when reset is triggered on another VF

Slawomir Laba <slawomirx.laba@intel.com>
    i40e: Fix ethtool rx-flow-hash setting for X722

Eric Dumazet <edumazet@google.com>
    ipv6: ensure sane device mtu in tunnels

Kajol Jain <kjain@linux.ibm.com>
    perf vendor events power10: Fix hv-24x7 metric events

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: vivid: set num_in/outputs to 0 if not supported

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: v4l2-dv-timings: add sanity checks for blanking values

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: vivid: dev->bitmap_cap wasn't freed in all cases

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: vivid: s_fbuf: add more sanity checks

Mario Limonciello <mario.limonciello@amd.com>
    PM: hibernate: Allow hybrid sleep to work with s2idle

Dongliang Mu <dzm91@hust.edu.cn>
    can: mcp251x: mcp251x_can_probe(): add missing unregister_candev() in error path

Dongliang Mu <dzm91@hust.edu.cn>
    can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error path

Rafael Mendonca <rafaelmendsr@gmail.com>
    drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()

Jakub Kicinski <kuba@kernel.org>
    net-memcg: avoid stalls when under memory pressure

Neal Cardwell <ncardwell@google.com>
    tcp: fix indefinite deferral of RTO with SACK reneging

Lu Wei <luwei32@huawei.com>
    tcp: fix a signed-integer-overflow bug in tcp_add_backlog()

Eric Dumazet <edumazet@google.com>
    tcp: minor optimization in tcp_add_backlog()

Zhang Changzhong <zhangchangzhong@huawei.com>
    net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY

Zhengchao Shao <shaozhengchao@huawei.com>
    net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed

Eric Dumazet <edumazet@google.com>
    kcm: annotate data-races around kcm->rx_wait

Eric Dumazet <edumazet@google.com>
    kcm: annotate data-races around kcm->rx_psock

Íñigo Huguet <ihuguet@redhat.com>
    atlantic: fix deadlock at aq_nic_stop

Ankit Nautiyal <ankit.k.nautiyal@intel.com>
    drm/i915/dp: Reset frl trained flag before restarting FRL training

Raju Rangoju <Raju.Rangoju@amd.com>
    amd-xgbe: add the bit rate quirk for Molex cables

Raju Rangoju <Raju.Rangoju@amd.com>
    amd-xgbe: fix the SFP compliance codes check for DAC cables

Chen Zhongjin <chenzhongjin@huawei.com>
    x86/unwind/orc: Fix unreliable stack dump with gcov

Shang XiaoJing <shangxiaojing@huawei.com>
    nfc: virtual_ncidev: Fix memory leak in virtual_nci_send()

Sergiu Moga <sergiu.moga@microchip.com>
    net: macb: Specify PHY PM management done by MAC

Zhengchao Shao <shaozhengchao@huawei.com>
    net: hinic: fix the issue of double release MBOX callback of VF

Zhengchao Shao <shaozhengchao@huawei.com>
    net: hinic: fix the issue of CMDQ memory leaks

Zhengchao Shao <shaozhengchao@huawei.com>
    net: hinic: fix memory leak when reading function table

Zhengchao Shao <shaozhengchao@huawei.com>
    net: hinic: fix incorrect assignment issue in hinic_set_interrupt_cfg()

Yang Yingliang <yangyingliang@huawei.com>
    net: netsec: fix error handling in netsec_register_mdio()

Xin Long <lucien.xin@gmail.com>
    tipc: fix a null-ptr-deref in tipc_topsrv_accept

Maxim Levitsky <mlevitsk@redhat.com>
    perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()

Yang Yingliang <yangyingliang@huawei.com>
    ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()

Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
    ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatile

Yang Yingliang <yangyingliang@huawei.com>
    mtd: rawnand: intel: Add missing of_node_put() in ebu_nand_probe()

Randy Dunlap <rdunlap@infradead.org>
    arc: iounmap() arg is volatile

Lin Shengwang <linshengwang1@huawei.com>
    sched/core: Fix comparison in sched_group_cookie_match()

Peter Zijlstra <peterz@infradead.org>
    perf: Fix missing SIGTRAPs

Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
    ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile

Gavin Shan <gshan@redhat.com>
    KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test

Nathan Huckleberry <nhuck@google.com>
    drm/msm: Fix return type of mdp4_lvds_connector_mode_valid

Dan Carpenter <dan.carpenter@oracle.com>
    media: atomisp: prevent integer overflow in sh_css_set_black_frame()

Alexander Stein <alexander.stein@ew.tq-group.com>
    media: v4l2: Fix v4l2_i2c_subdev_set_name function documentation

Wei Yongjun <weiyongjun1@huawei.com>
    net: ieee802154: fix error return code in dgram_bind()

Xin Long <lucien.xin@gmail.com>
    ethtool: eeprom: fix null-deref on genl_info in dump

Christian Löhle <CLoehle@hyperstone.com>
    mmc: block: Remove error check of hw_reset on reset

James Smart <jsmart2021@gmail.com>
    Revert "scsi: lpfc: SLI path split: Refactor lpfc_iocbq"

James Smart <jsmart2021@gmail.com>
    Revert "scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4"

James Smart <jsmart2021@gmail.com>
    Revert "scsi: lpfc: SLI path split: Refactor SCSI paths"

James Smart <jsmart2021@gmail.com>
    Revert "scsi: lpfc: Fix locking for lpfc_sli_iocbq_lookup()"

James Smart <jsmart2021@gmail.com>
    Revert "scsi: lpfc: Fix element offset in __lpfc_sli_release_iocbq_s4()"

James Smart <jsmart2021@gmail.com>
    Revert "scsi: lpfc: Resolve some cleanup issues following SLI path refactoring"

Heiko Carstens <hca@linux.ibm.com>
    s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser()

Heiko Carstens <hca@linux.ibm.com>
    s390/futex: add missing EX_TABLE entry to __futex_atomic_op()

Adrian Hunter <adrian.hunter@intel.com>
    perf auxtrace: Fix address filter symbol name match for modules

Pavel Kozlov <pavel.kozlov@synopsys.com>
    ARC: mm: fix leakage of memory allocated for PTE

Siarhei Volkau <lis8215@gmail.com>
    pinctrl: Ingenic: JZ4755 bug fixes

Christian A. Ehrhardt <lk@c--e.de>
    kernfs: fix use-after-free in __kernfs_remove

William Breathitt Gray <william.gray@linaro.org>
    counter: microchip-tcb-capture: Handle Signal1 read and Synapse

Sascha Hauer <s.hauer@pengutronix.de>
    mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus

Patrick Thompson <ptf@google.com>
    mmc: sdhci-pci-core: Disable ES for ASUS BIOS on Jasper Lake

Matthew Ma <mahongwei@zeku.com>
    mmc: core: Fix kernel panic when remove non-standard SDIO card

Brian Norris <briannorris@chromium.org>
    mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIO

James Clark <james.clark@arm.com>
    coresight: cti: Fix hang in cti_disable_hw()

Johan Hovold <johan+linaro@kernel.org>
    drm/msm/dp: fix IRQ lifetime

Johan Hovold <johan+linaro@kernel.org>
    drm/msm/hdmi: fix memory corruption with too many bridges

Johan Hovold <johan+linaro@kernel.org>
    drm/msm/dsi: fix memory corruption with too many bridges

Prike Liang <Prike.Liang@amd.com>
    drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume

Manish Rangankar <mrangankar@marvell.com>
    scsi: qla2xxx: Use transport-defined speed mask for supported_speeds

Miquel Raynal <miquel.raynal@bootlin.com>
    mac802154: Fix LQI recording

Bernd Edlinger <bernd.edlinger@hotmail.de>
    exec: Copy oldsighand->action under spin-lock

Li Zetao <lizetao1@huawei.com>
    fs/binfmt_elf: Fix memory leak in load_elf_binary()

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    cpufreq: intel_pstate: Read all MSRs on the target CPU

Hyunwoo Kim <imv4bel@gmail.com>
    fbdev: smscufx: Fix several use-after-free bugs

Matti Vaittinen <mazziesaccount@gmail.com>
    iio: adxl372: Fix unsafe buffer attributes

Cosmin Tanislav <cosmin.tanislav@analog.com>
    iio: temperature: ltc2983: allocate iio channels once

Shreeya Patel <shreeya.patel@collabora.com>
    iio: light: tsl2583: Fix module unloading

Matti Vaittinen <mazziesaccount@gmail.com>
    tools: iio: iio_utils: fix digit calculation

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Remove device endpoints from bandwidth list when freeing the device

Mario Limonciello <mario.limonciello@amd.com>
    xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Add quirk to reset host back to default state at shutdown

Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
    mtd: rawnand: marvell: Use correct logic for nand-keep-config

Jens Glathe <jens.glathe@oldschoolsolutions.biz>
    usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller

Justin Chen <justinpopo6@gmail.com>
    usb: bdc: change state when port disconnected

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Don't set IMI for no_interrupt

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Stop processing more requests on IMI

Jeff Vanhoof <qjv001@motorola.com>
    usb: gadget: uvc: fix sg handling during video encode

Dan Vacura <w36195@motorola.com>
    usb: gadget: uvc: fix sg handling in error case

Hannu Hartikainen <hannu@hrtk.in>
    USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCM

Jason A. Donenfeld <Jason@zx2c4.com>
    ALSA: rme9652: use explicitly signed char

Jason A. Donenfeld <Jason@zx2c4.com>
    ALSA: au88x0: use explicitly signed char

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Add quirks for M-Audio Fast Track C400/600

Steven Rostedt (Google) <rostedt@goodmis.org>
    ALSA: Use del_timer_sync() before freeing timer

Anssi Hannula <anssi.hannula@bitwise.fi>
    can: kvaser_usb: Fix possible completions during init_completion

Yang Yingliang <yangyingliang@huawei.com>
    can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()

Scott Mayhew <smayhew@redhat.com>
    NFSv4: Add an fattr allocation to _nfs4_discover_trunking()

Benjamin Coddington <bcodding@redhat.com>
    NFSv4: Fix free of uninitialized nfs4_label on referral lookup.


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arc/include/asm/io.h                          |   2 +-
 arch/arc/include/asm/pgtable-levels.h              |   2 +-
 arch/arc/mm/ioremap.c                              |   2 +-
 arch/arm64/include/asm/cputype.h                   |   4 +
 arch/arm64/kernel/proton-pack.c                    |   6 +
 arch/s390/include/asm/futex.h                      |   3 +-
 arch/s390/pci/pci_mmio.c                           |   8 +-
 arch/x86/events/intel/lbr.c                        |   2 +-
 arch/x86/kernel/unwind_orc.c                       |   2 +-
 drivers/base/power/domain.c                        |   4 +
 drivers/counter/microchip-tcb-capture.c            |  18 +-
 drivers/cpufreq/intel_pstate.c                     | 133 ++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c   |   6 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |  16 +
 drivers/gpu/drm/i915/display/intel_dp.c            |   2 +
 .../gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c    |   5 +-
 drivers/gpu/drm/msm/dp/dp_display.c                |   2 +-
 drivers/gpu/drm/msm/dsi/dsi.c                      |   6 +
 drivers/gpu/drm/msm/hdmi/hdmi.c                    |   5 +
 drivers/hwtracing/coresight/coresight-cti-core.c   |   5 -
 drivers/iio/accel/adxl372.c                        |  23 +-
 drivers/iio/light/tsl2583.c                        |   2 +-
 drivers/iio/temperature/ltc2983.c                  |  13 +-
 drivers/media/test-drivers/vivid/vivid-core.c      |  38 +-
 drivers/media/test-drivers/vivid/vivid-core.h      |   2 +
 drivers/media/test-drivers/vivid/vivid-vid-cap.c   |  27 +-
 drivers/media/v4l2-core/v4l2-dv-timings.c          |  14 +
 drivers/mmc/core/block.c                           |  44 +-
 drivers/mmc/core/sdio_bus.c                        |   3 +-
 drivers/mmc/host/Kconfig                           |   3 +-
 drivers/mmc/host/sdhci-esdhc-imx.c                 |  14 +-
 drivers/mmc/host/sdhci-pci-core.c                  |  14 +-
 drivers/mtd/nand/raw/intel-nand-controller.c       |  19 +-
 drivers/mtd/nand/raw/marvell_nand.c                |   2 +-
 drivers/net/can/mscan/mpc5xxx_can.c                |   8 +-
 drivers/net/can/rcar/rcar_canfd.c                  |  24 +-
 drivers/net/can/spi/mcp251x.c                      |   5 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c  |   4 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c   |   4 +-
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c        |  17 +-
 drivers/net/ethernet/aquantia/atlantic/aq_macsec.c |  96 ++-
 drivers/net/ethernet/aquantia/atlantic/aq_nic.h    |   2 +
 drivers/net/ethernet/broadcom/bcm4908_enet.c       |  10 +-
 drivers/net/ethernet/broadcom/bcmsysport.c         |   3 +
 drivers/net/ethernet/cadence/macb_main.c           |   1 +
 drivers/net/ethernet/freescale/enetc/enetc.c       |   5 +
 drivers/net/ethernet/freescale/fec_main.c          |  46 +-
 drivers/net/ethernet/huawei/hinic/hinic_debugfs.c  |  18 +-
 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c  |   2 +-
 drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c   |   2 +-
 drivers/net/ethernet/huawei/hinic/hinic_sriov.c    |   1 -
 drivers/net/ethernet/ibm/ehea/ehea_main.c          |   1 +
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     | 100 ++-
 drivers/net/ethernet/intel/i40e/i40e_type.h        |   4 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  43 +-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |   1 +
 drivers/net/ethernet/lantiq_etop.c                 |   1 -
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      |  10 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h   |   9 +
 drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h  |   6 +
 .../ethernet/mellanox/mlx5/core/en_accel/ipsec.c   |   3 -
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c    |   6 +
 drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c |   6 +-
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |  55 +-
 drivers/net/ethernet/micrel/ksz884x.c              |   2 +-
 drivers/net/ethernet/socionext/netsec.c            |   2 +
 drivers/net/ethernet/socionext/sni_ave.c           |   6 +
 drivers/net/netdevsim/dev.c                        |  11 +-
 drivers/nfc/virtual_ncidev.c                       |   3 +
 drivers/pinctrl/pinctrl-ingenic.c                  |   4 +-
 drivers/scsi/lpfc/lpfc.h                           |  40 -
 drivers/scsi/lpfc/lpfc_bsg.c                       |  50 +-
 drivers/scsi/lpfc/lpfc_crtn.h                      |   3 +-
 drivers/scsi/lpfc/lpfc_ct.c                        |   8 +-
 drivers/scsi/lpfc/lpfc_els.c                       | 139 ++--
 drivers/scsi/lpfc/lpfc_hw4.h                       |   7 -
 drivers/scsi/lpfc/lpfc_init.c                      |  13 +-
 drivers/scsi/lpfc/lpfc_nportdisc.c                 |   4 +-
 drivers/scsi/lpfc/lpfc_nvme.c                      |  34 +-
 drivers/scsi/lpfc/lpfc_nvme.h                      |   6 +-
 drivers/scsi/lpfc/lpfc_nvmet.c                     |  83 +-
 drivers/scsi/lpfc/lpfc_scsi.c                      | 441 ++++++-----
 drivers/scsi/lpfc/lpfc_sli.c                       | 876 ++++++++++++---------
 drivers/scsi/lpfc/lpfc_sli.h                       |  26 +-
 drivers/scsi/qla2xxx/qla_attr.c                    |  28 +-
 drivers/scsi/sd.c                                  |   3 +-
 drivers/staging/media/atomisp/pci/sh_css_params.c  |   4 +-
 drivers/tty/serial/8250/8250_omap.c                |   3 +
 drivers/tty/serial/8250/8250_pci.c                 |   9 +-
 drivers/tty/serial/8250/8250_port.c                |  12 +-
 drivers/tty/serial/fsl_lpuart.c                    |   8 +-
 drivers/tty/serial/imx.c                           |   8 +-
 drivers/tty/serial/serial_core.c                   |  61 +-
 drivers/usb/core/quirks.c                          |   9 +
 drivers/usb/dwc3/gadget.c                          |   8 +-
 drivers/usb/gadget/function/uvc_queue.c            |   8 +-
 drivers/usb/gadget/function/uvc_video.c            |  22 +-
 drivers/usb/gadget/udc/bdc/bdc_udc.c               |   1 +
 drivers/usb/host/xhci-mem.c                        |  20 +-
 drivers/usb/host/xhci-pci.c                        |  44 +-
 drivers/usb/host/xhci.c                            |  10 +-
 drivers/usb/host/xhci.h                            |   1 +
 drivers/video/fbdev/smscufx.c                      |  55 +-
 fs/binfmt_elf.c                                    |   3 +-
 fs/exec.c                                          |   4 +-
 fs/kernfs/dir.c                                    |   5 +-
 fs/nfs/nfs4namespace.c                             |   9 +-
 fs/nfs/nfs4proc.c                                  |  34 +-
 fs/nfs/nfs4state.c                                 |   9 +-
 fs/nfs/nfs4xdr.c                                   |   4 +-
 include/linux/mlx5/driver.h                        |   2 +-
 include/linux/nfs_xdr.h                            |   2 +-
 include/linux/perf_event.h                         |  19 +-
 include/media/v4l2-common.h                        |   3 +-
 include/net/sock.h                                 |   2 +-
 include/uapi/linux/videodev2.h                     |   3 +-
 kernel/events/core.c                               | 153 +++-
 kernel/events/ring_buffer.c                        |   2 +-
 kernel/power/hibernate.c                           |   2 +-
 kernel/sched/sched.h                               |  18 +-
 net/can/j1939/transport.c                          |   4 +-
 net/core/net_namespace.c                           |   7 +
 net/core/skbuff.c                                  |   2 +-
 net/ethtool/eeprom.c                               |   2 +-
 net/ieee802154/socket.c                            |   4 +-
 net/ipv4/nexthop.c                                 |   2 +-
 net/ipv4/tcp_input.c                               |   3 +-
 net/ipv4/tcp_ipv4.c                                |   7 +-
 net/ipv6/ip6_gre.c                                 |  12 +-
 net/ipv6/ip6_tunnel.c                              |  11 +-
 net/ipv6/ipv6_sockglue.c                           |   7 +
 net/ipv6/sit.c                                     |   8 +-
 net/kcm/kcmsock.c                                  |  25 +-
 net/mac802154/rx.c                                 |   5 +-
 net/openvswitch/datapath.c                         |   3 +-
 net/tipc/topsrv.c                                  |  16 +-
 sound/aoa/soundbus/i2sbus/core.c                   |   7 +-
 sound/pci/ac97/ac97_codec.c                        |   1 +
 sound/pci/au88x0/au88x0.h                          |   6 +-
 sound/pci/au88x0/au88x0_core.c                     |   2 +-
 sound/pci/rme9652/hdsp.c                           |  26 +-
 sound/pci/rme9652/rme9652.c                        |  22 +-
 sound/soc/qcom/lpass-cpu.c                         |  10 +
 sound/synth/emux/emux.c                            |   7 +-
 sound/usb/implicit.c                               |   2 +
 tools/iio/iio_utils.c                              |   4 +
 .../arch/arm64/hisilicon/hip08/metrics.json        |   6 +-
 .../arch/powerpc/power10/nest_metrics.json         |  72 +-
 tools/perf/util/auxtrace.c                         |  10 +-
 .../kvm/memslot_modification_stress_test.c         |   2 +-
 151 files changed, 2130 insertions(+), 1459 deletions(-)

[PATCH 5.15 001/132] NFSv4: Fix free of uninitialized nfs4_label on referral lookup.

[Greg Kroah-Hartman]

From: Benjamin Coddington <bcodding@redhat.com>

commit c3ed222745d9ad7b69299b349a64ba533c64a34f upstream.

Send along the already-allocated fattr along with nfs4_fs_locations, and
drop the memcpy of fattr.  We end up growing two more allocations, but this
fixes up a crash as:

PID: 790    TASK: ffff88811b43c000  CPU: 0   COMMAND: "ls"
 #0 [ffffc90000857920] panic at ffffffff81b9bfde
 #1 [ffffc900008579c0] do_trap at ffffffff81023a9b
 #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78
 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45
 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de
 #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs]
 #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f
 #7 [ffffc90000857c60] walk_component at ffffffff813a86c4
 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553
 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b

Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9558a007dbc3 ("NFS: Remove the label from the nfs4_lookup_res struct")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/nfs4namespace.c  |    9 +++++++--
 fs/nfs/nfs4proc.c       |   15 +++++++--------
 fs/nfs/nfs4state.c      |    9 ++++++++-
 fs/nfs/nfs4xdr.c        |    4 ++--
 include/linux/nfs_xdr.h |    2 +-
 5 files changed, 25 insertions(+), 14 deletions(-)

--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -417,6 +417,9 @@ static int nfs_do_refmount(struct fs_con
 	fs_locations = kmalloc(sizeof(struct nfs4_fs_locations), GFP_KERNEL);
 	if (!fs_locations)
 		goto out_free;
+	fs_locations->fattr = nfs_alloc_fattr();
+	if (!fs_locations->fattr)
+		goto out_free_2;
 
 	/* Get locations */
 	dentry = ctx->clone_data.dentry;
@@ -427,14 +430,16 @@ static int nfs_do_refmount(struct fs_con
 	err = nfs4_proc_fs_locations(client, d_inode(parent), &dentry->d_name, fs_locations, page);
 	dput(parent);
 	if (err != 0)
-		goto out_free_2;
+		goto out_free_3;
 
 	err = -ENOENT;
 	if (fs_locations->nlocations <= 0 ||
 	    fs_locations->fs_path.ncomponents <= 0)
-		goto out_free_2;
+		goto out_free_3;
 
 	err = nfs_follow_referral(fc, fs_locations);
+out_free_3:
+	kfree(fs_locations->fattr);
 out_free_2:
 	kfree(fs_locations);
 out_free:
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -4213,6 +4213,8 @@ static int nfs4_get_referral(struct rpc_
 	if (locations == NULL)
 		goto out;
 
+	locations->fattr = fattr;
+
 	status = nfs4_proc_fs_locations(client, dir, name, locations, page);
 	if (status != 0)
 		goto out;
@@ -4222,17 +4224,14 @@ static int nfs4_get_referral(struct rpc_
 	 * referral.  Cause us to drop into the exception handler, which
 	 * will kick off migration recovery.
 	 */
-	if (nfs_fsid_equal(&NFS_SERVER(dir)->fsid, &locations->fattr.fsid)) {
+	if (nfs_fsid_equal(&NFS_SERVER(dir)->fsid, &fattr->fsid)) {
 		dprintk("%s: server did not return a different fsid for"
 			" a referral at %s\n", __func__, name->name);
 		status = -NFS4ERR_MOVED;
 		goto out;
 	}
 	/* Fixup attributes for the nfs_lookup() call to nfs_fhget() */
-	nfs_fixup_referral_attributes(&locations->fattr);
-
-	/* replace the lookup nfs_fattr with the locations nfs_fattr */
-	memcpy(fattr, &locations->fattr, sizeof(struct nfs_fattr));
+	nfs_fixup_referral_attributes(fattr);
 	memset(fhandle, 0, sizeof(struct nfs_fh));
 out:
 	if (page)
@@ -7917,7 +7916,7 @@ static int _nfs4_proc_fs_locations(struc
 	else
 		bitmask[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
 
-	nfs_fattr_init(&fs_locations->fattr);
+	nfs_fattr_init(fs_locations->fattr);
 	fs_locations->server = server;
 	fs_locations->nlocations = 0;
 	status = nfs4_call_sync(client, server, &msg, &args.seq_args, &res.seq_res, 0);
@@ -7982,7 +7981,7 @@ static int _nfs40_proc_get_locations(str
 	unsigned long now = jiffies;
 	int status;
 
-	nfs_fattr_init(&locations->fattr);
+	nfs_fattr_init(locations->fattr);
 	locations->server = server;
 	locations->nlocations = 0;
 
@@ -8035,7 +8034,7 @@ static int _nfs41_proc_get_locations(str
 	};
 	int status;
 
-	nfs_fattr_init(&locations->fattr);
+	nfs_fattr_init(locations->fattr);
 	locations->server = server;
 	locations->nlocations = 0;
 
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -2096,6 +2096,11 @@ static int nfs4_try_migration(struct nfs
 		dprintk("<-- %s: no memory\n", __func__);
 		goto out;
 	}
+	locations->fattr = nfs_alloc_fattr();
+	if (locations->fattr == NULL) {
+		dprintk("<-- %s: no memory\n", __func__);
+		goto out;
+	}
 
 	inode = d_inode(server->super->s_root);
 	result = nfs4_proc_get_locations(server, NFS_FH(inode), locations,
@@ -2110,7 +2115,7 @@ static int nfs4_try_migration(struct nfs
 	if (!locations->nlocations)
 		goto out;
 
-	if (!(locations->fattr.valid & NFS_ATTR_FATTR_V4_LOCATIONS)) {
+	if (!(locations->fattr->valid & NFS_ATTR_FATTR_V4_LOCATIONS)) {
 		dprintk("<-- %s: No fs_locations data, migration skipped\n",
 			__func__);
 		goto out;
@@ -2135,6 +2140,8 @@ static int nfs4_try_migration(struct nfs
 out:
 	if (page != NULL)
 		__free_page(page);
+	if (locations != NULL)
+		kfree(locations->fattr);
 	kfree(locations);
 	if (result) {
 		pr_err("NFS: migration recovery failed (server %s)\n",
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -7028,7 +7028,7 @@ static int nfs4_xdr_dec_fs_locations(str
 	if (res->migration) {
 		xdr_enter_page(xdr, PAGE_SIZE);
 		status = decode_getfattr_generic(xdr,
-					&res->fs_locations->fattr,
+					res->fs_locations->fattr,
 					 NULL, res->fs_locations,
 					 NULL, res->fs_locations->server);
 		if (status)
@@ -7041,7 +7041,7 @@ static int nfs4_xdr_dec_fs_locations(str
 			goto out;
 		xdr_enter_page(xdr, PAGE_SIZE);
 		status = decode_getfattr_generic(xdr,
-					&res->fs_locations->fattr,
+					res->fs_locations->fattr,
 					 NULL, res->fs_locations,
 					 NULL, res->fs_locations->server);
 	}
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1219,7 +1219,7 @@ struct nfs4_fs_location {
 
 #define NFS4_FS_LOCATIONS_MAXENTRIES 10
 struct nfs4_fs_locations {
-	struct nfs_fattr fattr;
+	struct nfs_fattr *fattr;
 	const struct nfs_server *server;
 	struct nfs4_pathname fs_path;
 	int nlocations;

[PATCH 5.15 002/132] NFSv4: Add an fattr allocation to _nfs4_discover_trunking()

[Greg Kroah-Hartman]

From: Scott Mayhew <smayhew@redhat.com>

commit 4f40a5b5544618b096d1611a18219dd91fd57f80 upstream.

This was missed in c3ed222745d9 ("NFSv4: Fix free of uninitialized
nfs4_label on referral lookup.") and causes a panic when mounting
with '-o trunkdiscovery':

PID: 1604   TASK: ffff93dac3520000  CPU: 3   COMMAND: "mount.nfs"
 #0 [ffffb79140f738f8] machine_kexec at ffffffffaec64bee
 #1 [ffffb79140f73950] __crash_kexec at ffffffffaeda67fd
 #2 [ffffb79140f73a18] crash_kexec at ffffffffaeda76ed
 #3 [ffffb79140f73a30] oops_end at ffffffffaec2658d
 #4 [ffffb79140f73a50] general_protection at ffffffffaf60111e
    [exception RIP: nfs_fattr_init+0x5]
    RIP: ffffffffc0c18265  RSP: ffffb79140f73b08  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff93dac304a800  RCX: 0000000000000000
    RDX: ffffb79140f73bb0  RSI: ffff93dadc8cbb40  RDI: d03ee11cfaf6bd50
    RBP: ffffb79140f73be8   R8: ffffffffc0691560   R9: 0000000000000006
    R10: ffff93db3ffd3df8  R11: 0000000000000000  R12: ffff93dac4040000
    R13: ffff93dac2848e00  R14: ffffb79140f73b60  R15: ffffb79140f73b30
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #5 [ffffb79140f73b08] _nfs41_proc_get_locations at ffffffffc0c73d53 [nfsv4]
 #6 [ffffb79140f73bf0] nfs4_proc_get_locations at ffffffffc0c83e90 [nfsv4]
 #7 [ffffb79140f73c60] nfs4_discover_trunking at ffffffffc0c83fb7 [nfsv4]
 #8 [ffffb79140f73cd8] nfs_probe_fsinfo at ffffffffc0c0f95f [nfs]
 #9 [ffffb79140f73da0] nfs_probe_server at ffffffffc0c1026a [nfs]
    RIP: 00007f6254fce26e  RSP: 00007ffc69496ac8  RFLAGS: 00000246
    RAX: ffffffffffffffda  RBX: 0000000000000000  RCX: 00007f6254fce26e
    RDX: 00005600220a82a0  RSI: 00005600220a64d0  RDI: 00005600220a6520
    RBP: 00007ffc69496c50   R8: 00005600220a8710   R9: 003035322e323231
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007ffc69496c50
    R13: 00005600220a8440  R14: 0000000000000010  R15: 0000560020650ef9
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

Fixes: c3ed222745d9 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/nfs4proc.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3981,18 +3981,23 @@ static int _nfs4_discover_trunking(struc
 	}
 
 	page = alloc_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
 	locations = kmalloc(sizeof(struct nfs4_fs_locations), GFP_KERNEL);
-	if (page == NULL || locations == NULL)
-		goto out;
+	if (!locations)
+		goto out_free;
+	locations->fattr = nfs_alloc_fattr();
+	if (!locations->fattr)
+		goto out_free_2;
 
 	status = nfs4_proc_get_locations(server, fhandle, locations, page,
 					 cred);
-	if (status)
-		goto out;
-out:
-	if (page)
-		__free_page(page);
+
+	kfree(locations->fattr);
+out_free_2:
 	kfree(locations);
+out_free:
+	__free_page(page);
 	return status;
 }
 

[PATCH 5.15 003/132] can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

commit c3c06c61890da80494bb196f75d89b791adda87f upstream.

It is not allowed to call kfree_skb() from hardware interrupt context
or with interrupts being disabled. The skb is unlinked from the queue,
so it can be freed after spin_unlock_irqrestore().

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221027091237.2290111-1-yangyingliang@huawei.com
Cc: stable@vger.kernel.org
[mkl: adjust subject]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/j1939/transport.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -342,10 +342,12 @@ static void j1939_session_skb_drop_old(s
 		__skb_unlink(do_skb, &session->skb_queue);
 		/* drop ref taken in j1939_session_skb_queue() */
 		skb_unref(do_skb);
+		spin_unlock_irqrestore(&session->skb_queue.lock, flags);
 
 		kfree_skb(do_skb);
+	} else {
+		spin_unlock_irqrestore(&session->skb_queue.lock, flags);
 	}
-	spin_unlock_irqrestore(&session->skb_queue.lock, flags);
 }
 
 void j1939_session_skb_queue(struct j1939_session *session,

[PATCH 5.15 004/132] can: kvaser_usb: Fix possible completions during init_completion

[Greg Kroah-Hartman]

From: Anssi Hannula <anssi.hannula@bitwise.fi>

commit 2871edb32f4622c3a25ce4b3977bad9050b91974 upstream.

kvaser_usb uses completions to signal when a response event is received
for outgoing commands.

However, it uses init_completion() to reinitialize the start_comp and
stop_comp completions before sending the start/stop commands.

In case the device sends the corresponding response just before the
actual command is sent, complete() may be called concurrently with
init_completion() which is not safe.

This might be triggerable even with a properly functioning device by
stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which
also causes the driver to send CMD_STOP_CHIP when restart-ms is off),
but that was not tested.

Fix the issue by using reinit_completion() instead.

Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c |    4 ++--
 drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c  |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -1873,7 +1873,7 @@ static int kvaser_usb_hydra_start_chip(s
 {
 	int err;
 
-	init_completion(&priv->start_comp);
+	reinit_completion(&priv->start_comp);
 
 	err = kvaser_usb_hydra_send_simple_cmd(priv->dev, CMD_START_CHIP_REQ,
 					       priv->channel);
@@ -1891,7 +1891,7 @@ static int kvaser_usb_hydra_stop_chip(st
 {
 	int err;
 
-	init_completion(&priv->stop_comp);
+	reinit_completion(&priv->stop_comp);
 
 	/* Make sure we do not report invalid BUS_OFF from CMD_CHIP_STATE_EVENT
 	 * see comment in kvaser_usb_hydra_update_state()
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -1324,7 +1324,7 @@ static int kvaser_usb_leaf_start_chip(st
 {
 	int err;
 
-	init_completion(&priv->start_comp);
+	reinit_completion(&priv->start_comp);
 
 	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_START_CHIP,
 					      priv->channel);
@@ -1342,7 +1342,7 @@ static int kvaser_usb_leaf_stop_chip(str
 {
 	int err;
 
-	init_completion(&priv->stop_comp);
+	reinit_completion(&priv->stop_comp);
 
 	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_STOP_CHIP,
 					      priv->channel);

[PATCH 5.15 005/132] ALSA: Use del_timer_sync() before freeing timer

[Greg Kroah-Hartman]

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit f0a868788fcbf63cdab51f5adcf73b271ede8164 upstream.

The current code for freeing the emux timer is extremely dangerous:

  CPU0				CPU1
  ----				----
snd_emux_timer_callback()
			    snd_emux_free()
			      spin_lock(&emu->voice_lock)
			      del_timer(&emu->tlist); <-- returns immediately
			      spin_unlock(&emu->voice_lock);
			      [..]
			      kfree(emu);

  spin_lock(&emu->voice_lock);

 [BOOM!]

Instead just use del_timer_sync() which will wait for the timer to finish
before continuing. No need to check if the timer is active or not when
doing so.

This doesn't fix the race of a possible re-arming of the timer, but at
least it won't use the data that has just been freed.

[ Fixed unused variable warning by tiwai ]

Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221026231236.6834b551@gandalf.local.home
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/synth/emux/emux.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/sound/synth/emux/emux.c
+++ b/sound/synth/emux/emux.c
@@ -126,15 +126,10 @@ EXPORT_SYMBOL(snd_emux_register);
  */
 int snd_emux_free(struct snd_emux *emu)
 {
-	unsigned long flags;
-
 	if (! emu)
 		return -EINVAL;
 
-	spin_lock_irqsave(&emu->voice_lock, flags);
-	if (emu->timer_active)
-		del_timer(&emu->tlist);
-	spin_unlock_irqrestore(&emu->voice_lock, flags);
+	del_timer_sync(&emu->tlist);
 
 	snd_emux_proc_free(emu);
 	snd_emux_delete_virmidi(emu);

[PATCH 5.15 006/132] ALSA: usb-audio: Add quirks for M-Audio Fast Track C400/600

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 794814529384721ce8f4d34228dc599cc010353d upstream.

M-Audio Fast Track C400 and C600 devices (0763:2030 and 0763:2031,
respectively) seem requiring the explicit setup for the implicit
feedback mode.  This patch adds the quirk entries for those.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214817
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221021122722.24784-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/implicit.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/usb/implicit.c
+++ b/sound/usb/implicit.c
@@ -47,6 +47,8 @@ struct snd_usb_implicit_fb_match {
 static const struct snd_usb_implicit_fb_match playback_implicit_fb_quirks[] = {
 	/* Fixed EP */
 	/* FIXME: check the availability of generic matching */
+	IMPLICIT_FB_FIXED_DEV(0x0763, 0x2030, 0x81, 3), /* M-Audio Fast Track C400 */
+	IMPLICIT_FB_FIXED_DEV(0x0763, 0x2031, 0x81, 3), /* M-Audio Fast Track C600 */
 	IMPLICIT_FB_FIXED_DEV(0x0763, 0x2080, 0x81, 2), /* M-Audio FastTrack Ultra */
 	IMPLICIT_FB_FIXED_DEV(0x0763, 0x2081, 0x81, 2), /* M-Audio FastTrack Ultra */
 	IMPLICIT_FB_FIXED_DEV(0x2466, 0x8010, 0x81, 2), /* Fractal Audio Axe-Fx III */

[PATCH 5.15 007/132] ALSA: au88x0: use explicitly signed char

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit ee03c0f200eb0d9f22dd8732d9fb7956d91019c2 upstream.

With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:

sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)'
sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)'
sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned
sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned

As well, since one function returns errnos, return an `int` rather than
a `signed char`.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221024162929.536004-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/au88x0/au88x0.h      |    6 +++---
 sound/pci/au88x0/au88x0_core.c |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/sound/pci/au88x0/au88x0.h
+++ b/sound/pci/au88x0/au88x0.h
@@ -141,7 +141,7 @@ struct snd_vortex {
 #ifndef CHIP_AU8810
 	stream_t dma_wt[NR_WT];
 	wt_voice_t wt_voice[NR_WT];	/* WT register cache. */
-	char mixwt[(NR_WT / NR_WTPB) * 6];	/* WT mixin objects */
+	s8 mixwt[(NR_WT / NR_WTPB) * 6];	/* WT mixin objects */
 #endif
 
 	/* Global resources */
@@ -235,8 +235,8 @@ static int vortex_alsafmt_aspfmt(snd_pcm
 static void vortex_connect_default(vortex_t * vortex, int en);
 static int vortex_adb_allocroute(vortex_t * vortex, int dma, int nr_ch,
 				 int dir, int type, int subdev);
-static char vortex_adb_checkinout(vortex_t * vortex, int resmap[], int out,
-				  int restype);
+static int vortex_adb_checkinout(vortex_t * vortex, int resmap[], int out,
+				 int restype);
 #ifndef CHIP_AU8810
 static int vortex_wt_allocroute(vortex_t * vortex, int dma, int nr_ch);
 static void vortex_wt_connect(vortex_t * vortex, int en);
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1998,7 +1998,7 @@ static const int resnum[VORTEX_RESOURCE_
  out: Mean checkout if != 0. Else mean Checkin resource.
  restype: Indicates type of resource to be checked in or out.
 */
-static char
+static int
 vortex_adb_checkinout(vortex_t * vortex, int resmap[], int out, int restype)
 {
 	int i, qty = resnum[restype], resinuse = 0;

[PATCH 5.15 008/132] ALSA: rme9652: use explicitly signed char

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 50895a55bcfde8ac6f22a37c6bc8cff506b3c7c6 upstream.

With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:

sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned
sound/pci/rme9652/hdsp.c:4153 snd_hdsp_channel_info() warn: impossible condition '(hdsp->channel_map[channel] < 0) => (0-255 < 0)'
sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221025000313.546261-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/rme9652/hdsp.c    |   26 +++++++++++++-------------
 sound/pci/rme9652/rme9652.c |   22 +++++++++++-----------
 2 files changed, 24 insertions(+), 24 deletions(-)

--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -433,7 +433,7 @@ struct hdsp_midi {
     struct snd_rawmidi           *rmidi;
     struct snd_rawmidi_substream *input;
     struct snd_rawmidi_substream *output;
-    char                     istimer; /* timer in use */
+    signed char		     istimer; /* timer in use */
     struct timer_list	     timer;
     spinlock_t               lock;
     int			     pending;
@@ -480,7 +480,7 @@ struct hdsp {
 	pid_t                 playback_pid;
 	int                   running;
 	int                   system_sample_rate;
-	const char           *channel_map;
+	const signed char    *channel_map;
 	int                   dev;
 	int                   irq;
 	unsigned long         port;
@@ -502,7 +502,7 @@ struct hdsp {
    where the data for that channel can be read/written from/to.
 */
 
-static const char channel_map_df_ss[HDSP_MAX_CHANNELS] = {
+static const signed char channel_map_df_ss[HDSP_MAX_CHANNELS] = {
 	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
 	18, 19, 20, 21, 22, 23, 24, 25
 };
@@ -517,7 +517,7 @@ static const char channel_map_mf_ss[HDSP
 	-1, -1, -1, -1, -1, -1, -1, -1
 };
 
-static const char channel_map_ds[HDSP_MAX_CHANNELS] = {
+static const signed char channel_map_ds[HDSP_MAX_CHANNELS] = {
 	/* ADAT channels are remapped */
 	1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23,
 	/* channels 12 and 13 are S/PDIF */
@@ -526,7 +526,7 @@ static const char channel_map_ds[HDSP_MA
 	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
 };
 
-static const char channel_map_H9632_ss[HDSP_MAX_CHANNELS] = {
+static const signed char channel_map_H9632_ss[HDSP_MAX_CHANNELS] = {
 	/* ADAT channels */
 	0, 1, 2, 3, 4, 5, 6, 7,
 	/* SPDIF */
@@ -540,7 +540,7 @@ static const char channel_map_H9632_ss[H
 	-1, -1
 };
 
-static const char channel_map_H9632_ds[HDSP_MAX_CHANNELS] = {
+static const signed char channel_map_H9632_ds[HDSP_MAX_CHANNELS] = {
 	/* ADAT */
 	1, 3, 5, 7,
 	/* SPDIF */
@@ -554,7 +554,7 @@ static const char channel_map_H9632_ds[H
 	-1, -1, -1, -1, -1, -1
 };
 
-static const char channel_map_H9632_qs[HDSP_MAX_CHANNELS] = {
+static const signed char channel_map_H9632_qs[HDSP_MAX_CHANNELS] = {
 	/* ADAT is disabled in this mode */
 	/* SPDIF */
 	8, 9,
@@ -3939,7 +3939,7 @@ static snd_pcm_uframes_t snd_hdsp_hw_poi
 	return hdsp_hw_pointer(hdsp);
 }
 
-static char *hdsp_channel_buffer_location(struct hdsp *hdsp,
+static signed char *hdsp_channel_buffer_location(struct hdsp *hdsp,
 					     int stream,
 					     int channel)
 
@@ -3964,7 +3964,7 @@ static int snd_hdsp_playback_copy(struct
 				  void __user *src, unsigned long count)
 {
 	struct hdsp *hdsp = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	if (snd_BUG_ON(pos + count > HDSP_CHANNEL_BUFFER_BYTES))
 		return -EINVAL;
@@ -3982,7 +3982,7 @@ static int snd_hdsp_playback_copy_kernel
 					 void *src, unsigned long count)
 {
 	struct hdsp *hdsp = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	channel_buf = hdsp_channel_buffer_location(hdsp, substream->pstr->stream, channel);
 	if (snd_BUG_ON(!channel_buf))
@@ -3996,7 +3996,7 @@ static int snd_hdsp_capture_copy(struct
 				 void __user *dst, unsigned long count)
 {
 	struct hdsp *hdsp = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	if (snd_BUG_ON(pos + count > HDSP_CHANNEL_BUFFER_BYTES))
 		return -EINVAL;
@@ -4014,7 +4014,7 @@ static int snd_hdsp_capture_copy_kernel(
 					void *dst, unsigned long count)
 {
 	struct hdsp *hdsp = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	channel_buf = hdsp_channel_buffer_location(hdsp, substream->pstr->stream, channel);
 	if (snd_BUG_ON(!channel_buf))
@@ -4028,7 +4028,7 @@ static int snd_hdsp_hw_silence(struct sn
 			       unsigned long count)
 {
 	struct hdsp *hdsp = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	channel_buf = hdsp_channel_buffer_location (hdsp, substream->pstr->stream, channel);
 	if (snd_BUG_ON(!channel_buf))
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -230,7 +230,7 @@ struct snd_rme9652 {
 	int last_spdif_sample_rate;	/* so that we can catch externally ... */
 	int last_adat_sample_rate;	/* ... induced rate changes            */
 
-	const char *channel_map;
+	const signed char *channel_map;
 
 	struct snd_card *card;
 	struct snd_pcm *pcm;
@@ -247,12 +247,12 @@ struct snd_rme9652 {
    where the data for that channel can be read/written from/to.
 */
 
-static const char channel_map_9652_ss[26] = {
+static const signed char channel_map_9652_ss[26] = {
 	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
 	18, 19, 20, 21, 22, 23, 24, 25
 };
 
-static const char channel_map_9636_ss[26] = {
+static const signed char channel_map_9636_ss[26] = {
 	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 
 	/* channels 16 and 17 are S/PDIF */
 	24, 25,
@@ -260,7 +260,7 @@ static const char channel_map_9636_ss[26
 	-1, -1, -1, -1, -1, -1, -1, -1
 };
 
-static const char channel_map_9652_ds[26] = {
+static const signed char channel_map_9652_ds[26] = {
 	/* ADAT channels are remapped */
 	1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23,
 	/* channels 12 and 13 are S/PDIF */
@@ -269,7 +269,7 @@ static const char channel_map_9652_ds[26
 	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
 };
 
-static const char channel_map_9636_ds[26] = {
+static const signed char channel_map_9636_ds[26] = {
 	/* ADAT channels are remapped */
 	1, 3, 5, 7, 9, 11, 13, 15,
 	/* channels 8 and 9 are S/PDIF */
@@ -1819,7 +1819,7 @@ static snd_pcm_uframes_t snd_rme9652_hw_
 	return rme9652_hw_pointer(rme9652);
 }
 
-static char *rme9652_channel_buffer_location(struct snd_rme9652 *rme9652,
+static signed char *rme9652_channel_buffer_location(struct snd_rme9652 *rme9652,
 					     int stream,
 					     int channel)
 
@@ -1847,7 +1847,7 @@ static int snd_rme9652_playback_copy(str
 				     void __user *src, unsigned long count)
 {
 	struct snd_rme9652 *rme9652 = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	if (snd_BUG_ON(pos + count > RME9652_CHANNEL_BUFFER_BYTES))
 		return -EINVAL;
@@ -1867,7 +1867,7 @@ static int snd_rme9652_playback_copy_ker
 					    void *src, unsigned long count)
 {
 	struct snd_rme9652 *rme9652 = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	channel_buf = rme9652_channel_buffer_location(rme9652,
 						      substream->pstr->stream,
@@ -1883,7 +1883,7 @@ static int snd_rme9652_capture_copy(stru
 				    void __user *dst, unsigned long count)
 {
 	struct snd_rme9652 *rme9652 = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	if (snd_BUG_ON(pos + count > RME9652_CHANNEL_BUFFER_BYTES))
 		return -EINVAL;
@@ -1903,7 +1903,7 @@ static int snd_rme9652_capture_copy_kern
 					   void *dst, unsigned long count)
 {
 	struct snd_rme9652 *rme9652 = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	channel_buf = rme9652_channel_buffer_location(rme9652,
 						      substream->pstr->stream,
@@ -1919,7 +1919,7 @@ static int snd_rme9652_hw_silence(struct
 				  unsigned long count)
 {
 	struct snd_rme9652 *rme9652 = snd_pcm_substream_chip(substream);
-	char *channel_buf;
+	signed char *channel_buf;
 
 	channel_buf = rme9652_channel_buffer_location (rme9652,
 						       substream->pstr->stream,

[PATCH 5.15 009/132] USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCM

[Greg Kroah-Hartman]

From: Hannu Hartikainen <hannu@hrtk.in>

commit fc4ade55c617dc73c7e9756b57f3230b4ff24540 upstream.

NVIDIA Jetson devices in Force Recovery mode (RCM) do not support
suspending, ie. flashing fails if the device has been suspended. The
devices are still visible in lsusb and seem to work otherwise, making
the issue hard to debug. This has been discovered in various forum
posts, eg. [1].

The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding
all the Jetson models listed in [2] on the assumption that they all
behave similarly.

[1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365
[2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html

Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@kernel.org>  # after 6.1-rc3
Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -388,6 +388,15 @@ static const struct usb_device_id usb_qu
 	/* Kingston DataTraveler 3.0 */
 	{ USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* NVIDIA Jetson devices in Force Recovery mode */
+	{ USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
 	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 

[PATCH 5.15 010/132] usb: gadget: uvc: fix sg handling in error case

[Greg Kroah-Hartman]

From: Dan Vacura <w36195@motorola.com>

commit 0a0a2760b04814428800d48281a447a7522470ad upstream.

If there is a transmission error the buffer will be returned too early,
causing a memory fault as subsequent requests for that buffer are still
queued up to be sent. Refactor the error handling to wait for the final
request to come in before reporting back the buffer to userspace for all
transfer types (bulk/isoc/isoc_sg). This ensures userspace knows if the
frame was successfully sent.

Fixes: e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-4-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/uvc_queue.c |    8 +++++---
 drivers/usb/gadget/function/uvc_video.c |   18 ++++++++++++++----
 2 files changed, 19 insertions(+), 7 deletions(-)

--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -313,6 +313,7 @@ int uvcg_queue_enable(struct uvc_video_q
 
 		queue->sequence = 0;
 		queue->buf_used = 0;
+		queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
 	} else {
 		ret = vb2_streamoff(&queue->queue, queue->queue.type);
 		if (ret < 0)
@@ -338,10 +339,11 @@ int uvcg_queue_enable(struct uvc_video_q
 void uvcg_complete_buffer(struct uvc_video_queue *queue,
 					  struct uvc_buffer *buf)
 {
-	if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
-	     buf->length != buf->bytesused) {
-		buf->state = UVC_BUF_STATE_QUEUED;
+	if (queue->flags & UVC_QUEUE_DROP_INCOMPLETE) {
+		queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
+		buf->state = UVC_BUF_STATE_ERROR;
 		vb2_set_plane_payload(&buf->buf.vb2_buf, 0, 0);
+		vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
 		return;
 	}
 
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -59,6 +59,7 @@ uvc_video_encode_bulk(struct usb_request
 		struct uvc_buffer *buf)
 {
 	void *mem = req->buf;
+	struct uvc_request *ureq = req->context;
 	int len = video->req_size;
 	int ret;
 
@@ -84,13 +85,14 @@ uvc_video_encode_bulk(struct usb_request
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		list_del(&buf->queue);
-		uvcg_complete_buffer(&video->queue, buf);
 		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
 
 		video->payload_size = 0;
 	}
 
 	if (video->payload_size == video->max_payload_size ||
+	    video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE ||
 	    buf->bytesused == video->queue.buf_used)
 		video->payload_size = 0;
 }
@@ -151,7 +153,8 @@ uvc_video_encode_isoc_sg(struct usb_requ
 	req->length -= len;
 	video->queue.buf_used += req->length - header_len;
 
-	if (buf->bytesused == video->queue.buf_used || !buf->sg) {
+	if (buf->bytesused == video->queue.buf_used || !buf->sg ||
+			video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		buf->offset = 0;
@@ -166,6 +169,7 @@ uvc_video_encode_isoc(struct usb_request
 		struct uvc_buffer *buf)
 {
 	void *mem = req->buf;
+	struct uvc_request *ureq = req->context;
 	int len = video->req_size;
 	int ret;
 
@@ -180,12 +184,13 @@ uvc_video_encode_isoc(struct usb_request
 
 	req->length = video->req_size - len;
 
-	if (buf->bytesused == video->queue.buf_used) {
+	if (buf->bytesused == video->queue.buf_used ||
+			video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		list_del(&buf->queue);
-		uvcg_complete_buffer(&video->queue, buf);
 		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
 	}
 }
 
@@ -222,6 +227,11 @@ uvc_video_complete(struct usb_ep *ep, st
 	case 0:
 		break;
 
+	case -EXDEV:
+		uvcg_dbg(&video->uvc->func, "VS request missed xfer.\n");
+		queue->flags |= UVC_QUEUE_DROP_INCOMPLETE;
+		break;
+
 	case -ESHUTDOWN:	/* disconnect from host. */
 		uvcg_dbg(&video->uvc->func, "VS request cancelled.\n");
 		uvcg_queue_cancel(queue, 1);

[PATCH 5.15 011/132] usb: gadget: uvc: fix sg handling during video encode

[Greg Kroah-Hartman]

From: Jeff Vanhoof <qjv001@motorola.com>

commit b57b08e6f431348363adffa5b6643fe3ec9dc7fe upstream.

In uvc_video_encode_isoc_sg, the uvc_request's sg list is
incorrectly being populated leading to corrupt video being
received by the remote end. When building the sg list the
usage of buf->sg's 'dma_length' field is not correct and
instead its 'length' field should be used.

Fixes: e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeff Vanhoof <qjv001@motorola.com>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-5-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/uvc_video.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -128,10 +128,10 @@ uvc_video_encode_isoc_sg(struct usb_requ
 	sg = sg_next(sg);
 
 	for_each_sg(sg, iter, ureq->sgt.nents - 1, i) {
-		if (!len || !buf->sg || !sg_dma_len(buf->sg))
+		if (!len || !buf->sg || !buf->sg->length)
 			break;
 
-		sg_left = sg_dma_len(buf->sg) - buf->offset;
+		sg_left = buf->sg->length - buf->offset;
 		part = min_t(unsigned int, len, sg_left);
 
 		sg_set_page(iter, sg_page(buf->sg), part, buf->offset);

[PATCH 5.15 012/132] usb: dwc3: gadget: Stop processing more requests on IMI

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit f78961f8380b940e0cfc7e549336c21a2ad44f4d upstream.

When servicing a transfer completion event, the dwc3 driver will reclaim
TRBs of started requests up to the request associated with the interrupt
event. Currently we don't check for interrupt due to missed isoc, and
the driver may attempt to reclaim TRBs beyond the associated event. This
causes invalid memory access when the hardware still owns the TRB. If
there's a missed isoc TRB with IMI (interrupt on missed isoc), make sure
to stop servicing further.

Note that only the last TRB of chained TRBs has its status updated with
missed isoc.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org
Reported-by: Jeff Vanhoof <jdv1029@gmail.com>
Reported-by: Dan Vacura <w36195@motorola.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com>
Tested-by: Jeff Vanhoof <jdv1029@gmail.com>
Link: https://lore.kernel.org/r/b29acbeab531b666095dfdafd8cb5c7654fbb3e1.1666735451.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3146,6 +3146,10 @@ static int dwc3_gadget_ep_reclaim_comple
 	if (event->status & DEPEVT_STATUS_SHORT && !chain)
 		return 1;
 
+	if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) &&
+	    DWC3_TRB_SIZE_TRBSTS(trb->size) == DWC3_TRBSTS_MISSED_ISOC)
+		return 1;
+
 	if ((trb->ctrl & DWC3_TRB_CTRL_IOC) ||
 	    (trb->ctrl & DWC3_TRB_CTRL_LST))
 		return 1;

[PATCH 5.15 013/132] usb: dwc3: gadget: Dont set IMI for no_interrupt

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 308c316d16cbad99bb834767382baa693ac42169 upstream.

The gadget driver may have a certain expectation of how the request
completion flow should be from to its configuration. Make sure the
controller driver respect that. That is, don't set IMI (Interrupt on
Missed Isoc) when usb_request->no_interrupt is set. Also, the driver
should only set IMI to the last TRB of a chain.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com>
Tested-by: Jeff Vanhoof <jdv1029@gmail.com>
Link: https://lore.kernel.org/r/ced336c84434571340c07994e3667a0ee284fefe.1666735451.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1263,8 +1263,8 @@ static void dwc3_prepare_one_trb(struct
 			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
 		}
 
-		/* always enable Interrupt on Missed ISOC */
-		trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+		if (!no_interrupt && !chain)
+			trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 		break;
 
 	case USB_ENDPOINT_XFER_BULK:

[PATCH 5.15 014/132] usb: bdc: change state when port disconnected

[Greg Kroah-Hartman]

From: Justin Chen <justinpopo6@gmail.com>

commit fb8f60dd1b67520e0e0d7978ef17d015690acfc1 upstream.

When port is connected and then disconnected, the state stays as
configured. Which is incorrect as the port is no longer configured,
but in a not attached state.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/bdc/bdc_udc.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/udc/bdc/bdc_udc.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c
@@ -151,6 +151,7 @@ static void bdc_uspc_disconnected(struct
 	bdc->delayed_status = false;
 	bdc->reinit = reinit;
 	bdc->test_mode = false;
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED);
 }
 
 /* TNotify wkaeup timer */

[PATCH 5.15 015/132] usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller

[Greg Kroah-Hartman]

From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>

commit 4f547472380136718b56064ea5689a61e135f904 upstream.

This appears to fix the error:
"xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of
current TD ep_index 2 comp_code 13" that appear spuriously (or pretty
often) when using a r8152 USB3 ethernet adapter with integrated hub.

ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0

Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3

Cc: stable@vger.kernel.org
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-pci.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -307,8 +307,14 @@ static void xhci_pci_quirks(struct devic
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
-		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
+		/*
+		 * try to tame the ASMedia 1042 controller which reports 0.96
+		 * but appears to behave more like 1.0
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;

[PATCH 5.15 016/132] mtd: rawnand: marvell: Use correct logic for nand-keep-config

[Greg Kroah-Hartman]

From: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>

commit ce107713b722af57c4b7f2477594d445b496420e upstream.

Originally the absence of the marvell,nand-keep-config property caused
the setup_data_interface function to be provided. However when
setup_data_interface was moved into nand_controller_ops the logic was
unintentionally inverted. Update the logic so that only if the
marvell,nand-keep-config property is present the bootloader NAND config
kept.

Cc: stable@vger.kernel.org
Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220927024728.28447-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mtd/nand/raw/marvell_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2672,7 +2672,7 @@ static int marvell_nand_chip_init(struct
 	chip->controller = &nfc->controller;
 	nand_set_flash_node(chip, np);
 
-	if (!of_property_read_bool(np, "marvell,nand-keep-config"))
+	if (of_property_read_bool(np, "marvell,nand-keep-config"))
 		chip->options |= NAND_KEEP_TIMINGS;
 
 	mtd = nand_to_mtd(chip);

[PATCH 5.15 017/132] xhci: Add quirk to reset host back to default state at shutdown

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 34cd2db408d591bc15771cbcc90939ade0a99a21 upstream.

Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.

This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.

A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ecf1 ("xhci: turn off port power in shutdown")
but it caused regression.

Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-pci.c |    4 ++++
 drivers/usb/host/xhci.c     |   10 ++++++++--
 drivers/usb/host/xhci.h     |    1 +
 3 files changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -259,6 +259,10 @@ static void xhci_pci_quirks(struct devic
 		xhci->quirks |= XHCI_MISSING_CAS;
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI)
+		xhci->quirks |= XHCI_RESET_TO_DEFAULT;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 	    (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -795,9 +795,15 @@ void xhci_shutdown(struct usb_hcd *hcd)
 
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
-	/* Workaround for spurious wakeups at shutdown with HSW */
-	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+
+	/*
+	 * Workaround for spurious wakeps at shutdown with HSW, and for boot
+	 * firmware delay in ADL-P PCH if port are left in U3 at shutdown
+	 */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP ||
+	    xhci->quirks & XHCI_RESET_TO_DEFAULT)
 		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+
 	spin_unlock_irq(&xhci->lock);
 
 	xhci_cleanup_msix(xhci);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1904,6 +1904,7 @@ struct xhci_hcd {
 #define XHCI_BROKEN_D3COLD	BIT_ULL(41)
 #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
 #define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
+#define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;

[PATCH 5.15 018/132] xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit a611bf473d1f77b70f7188b5577542cb39b4701b upstream.

For optimal power consumption of USB4 routers the XHCI PCIe endpoint
used for tunneling must be in D3.  Historically this is accomplished
by a long list of PCIe IDs that correspond to these endpoints because
the xhci_hcd driver will not default to allowing runtime PM for all
devices.

As both AMD and Intel have released new products with new XHCI controllers
this list continues to grow. In reviewing the XHCI specification v1.2 on
page 607 there is already a requirement that the PCI power management
states D3hot and D3cold must be supported.

In the quirk list, use this to indicate that runtime PM should be allowed
on XHCI controllers. The following controllers are known to be xHC 1.2 and
dropped explicitly:
* AMD Yellow Carp
* Intel Alder Lake
* Intel Meteor Lake
* Intel Raptor Lake

[keep PCI ID for Alder Lake PCH for recently added quirk -Mathias]

Cc: stable@vger.kernel.org
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-pci.c |   32 ++++----------------------------
 1 file changed, 4 insertions(+), 28 deletions(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -58,25 +58,13 @@
 #define PCI_DEVICE_ID_INTEL_CML_XHCI			0xa3af
 #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI		0x9a13
 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI		0x1138
-#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI		0x461e
-#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI		0x464e
-#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI	0x51ed
-#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI		0xa71e
-#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI		0x7ec0
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI		0x51ed
 
 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI			0x1639
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1		0x161a
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2		0x161b
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3		0x161d
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4		0x161e
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5		0x15d6
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6		0x15d7
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7		0x161c
-#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8		0x161f
 
 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI			0x1042
 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
@@ -273,12 +261,7 @@ static void xhci_pci_quirks(struct devic
 	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI))
+	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI))
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
@@ -347,15 +330,8 @@ static void xhci_pci_quirks(struct devic
 	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
 		xhci->quirks |= XHCI_NO_SOFT_RETRY;
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
-	    (pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 ||
-	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8))
+	/* xHC spec requires PCI devices to support D3hot and D3cold */
+	if (xhci->hci_version >= 0x120)
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)

[PATCH 5.15 019/132] xhci: Remove device endpoints from bandwidth list when freeing the device

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream.

Endpoints are normally deleted from the bandwidth list when they are
dropped, before the virt device is freed.

If xHC host is dying or being removed then the endpoints aren't dropped
cleanly due to functions returning early to avoid interacting with a
non-accessible host controller.

So check and delete endpoints that are still on the bandwidth list when
freeing the virt device.

Solves a list_del corruption kernel crash when unbinding xhci-pci,
caused by xhci_mem_cleanup() when it later tried to delete already freed
endpoints from the bandwidth list.

This only affects hosts that use software bandwidth checking, which
currenty is only the xHC in intel Panther Point PCH (Ivy Bridge)

Cc: stable@vger.kernel.org
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-mem.c |   20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -898,15 +898,19 @@ void xhci_free_virt_device(struct xhci_h
 		if (dev->eps[i].stream_info)
 			xhci_free_stream_info(xhci,
 					dev->eps[i].stream_info);
-		/* Endpoints on the TT/root port lists should have been removed
-		 * when usb_disable_device() was called for the device.
-		 * We can't drop them anyway, because the udev might have gone
-		 * away by this point, and we can't tell what speed it was.
+		/*
+		 * Endpoints are normally deleted from the bandwidth list when
+		 * endpoints are dropped, before device is freed.
+		 * If host is dying or being removed then endpoints aren't
+		 * dropped cleanly, so delete the endpoint from list here.
+		 * Only applicable for hosts with software bandwidth checking.
 		 */
-		if (!list_empty(&dev->eps[i].bw_endpoint_list))
-			xhci_warn(xhci, "Slot %u endpoint %u "
-					"not removed from BW list!\n",
-					slot_id, i);
+
+		if (!list_empty(&dev->eps[i].bw_endpoint_list)) {
+			list_del_init(&dev->eps[i].bw_endpoint_list);
+			xhci_dbg(xhci, "Slot %u endpoint %u not removed from BW list!\n",
+				 slot_id, i);
+		}
 	}
 	/* If this is a hub, free the TT(s) from the TT list */
 	xhci_free_tt_info(xhci, dev, slot_id);

[PATCH 5.15 020/132] tools: iio: iio_utils: fix digit calculation

[Greg Kroah-Hartman]

From: Matti Vaittinen <mazziesaccount@gmail.com>

commit 72b2aa38191bcba28389b0e20bf6b4f15017ff2b upstream.

The iio_utils uses a digit calculation in order to know length of the
file name containing a buffer number. The digit calculation does not
work for number 0.

This leads to allocation of one character too small buffer for the
file-name when file name contains value '0'. (Eg. buffer0).

Fix digit calculation by returning one digit to be present for number
'0'.

Fixes: 096f9b862e60 ("tools:iio:iio_utils: implement digit calculation")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/Y0f+tKCz+ZAIoroQ@dc75zzyyyyyyyyyyyyycy-3.rev.dnainternet.fi
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/iio/iio_utils.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/tools/iio/iio_utils.c
+++ b/tools/iio/iio_utils.c
@@ -547,6 +547,10 @@ static int calc_digits(int num)
 {
 	int count = 0;
 
+	/* It takes a digit to represent zero */
+	if (!num)
+		return 1;
+
 	while (num != 0) {
 		num /= 10;
 		count++;

[PATCH 5.15 021/132] iio: light: tsl2583: Fix module unloading

[Greg Kroah-Hartman]

From: Shreeya Patel <shreeya.patel@collabora.com>

commit 0dec4d2f2636b9e54d9d29f17afc7687c5407f78 upstream.

tsl2583 probe() uses devm_iio_device_register() and calling
iio_device_unregister() causes the unregister to occur twice. s
Switch to iio_device_register() instead of devm_iio_device_register()
in probe to avoid the device managed cleanup.

Fixes: 371894f5d1a0 ("iio: tsl2583: add runtime power management support")
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Link: https://lore.kernel.org/r/20220826122352.288438-1-shreeya.patel@collabora.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/light/tsl2583.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/light/tsl2583.c
+++ b/drivers/iio/light/tsl2583.c
@@ -858,7 +858,7 @@ static int tsl2583_probe(struct i2c_clie
 					 TSL2583_POWER_OFF_DELAY_MS);
 	pm_runtime_use_autosuspend(&clientp->dev);
 
-	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
+	ret = iio_device_register(indio_dev);
 	if (ret) {
 		dev_err(&clientp->dev, "%s: iio registration failed\n",
 			__func__);

[PATCH 5.15 022/132] iio: temperature: ltc2983: allocate iio channels once

[Greg Kroah-Hartman]

From: Cosmin Tanislav <cosmin.tanislav@analog.com>

commit 4132f19173211856d35180958d2754f5c56d520a upstream.

Currently, every time the device wakes up from sleep, the
iio_chan array is reallocated, leaking the previous one
until the device is removed (basically never).

Move the allocation to the probe function to avoid this.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983")
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221014123724.1401011-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/temperature/ltc2983.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -1376,13 +1376,6 @@ static int ltc2983_setup(struct ltc2983_
 		return ret;
 	}
 
-	st->iio_chan = devm_kzalloc(&st->spi->dev,
-				    st->iio_channels * sizeof(*st->iio_chan),
-				    GFP_KERNEL);
-
-	if (!st->iio_chan)
-		return -ENOMEM;
-
 	ret = regmap_update_bits(st->regmap, LTC2983_GLOBAL_CONFIG_REG,
 				 LTC2983_NOTCH_FREQ_MASK,
 				 LTC2983_NOTCH_FREQ(st->filter_notch_freq));
@@ -1494,6 +1487,12 @@ static int ltc2983_probe(struct spi_devi
 	if (ret)
 		return ret;
 
+	st->iio_chan = devm_kzalloc(&spi->dev,
+				    st->iio_channels * sizeof(*st->iio_chan),
+				    GFP_KERNEL);
+	if (!st->iio_chan)
+		return -ENOMEM;
+
 	ret = ltc2983_setup(st, true);
 	if (ret)
 		return ret;

[PATCH 5.15 023/132] iio: adxl372: Fix unsafe buffer attributes

[Greg Kroah-Hartman]

From: Matti Vaittinen <mazziesaccount@gmail.com>

commit ab0ee36e90f611f32c3a53afe9dc743de48138e2 upstream.

The iio_triggered_buffer_setup_ext() was changed by
commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
to silently expect that all attributes given in buffer_attrs array are
device-attributes. This expectation was not forced by the API - and some
drivers did register attributes created by IIO_CONST_ATTR().

The added attribute "wrapping" does not copy the pointer to stored
string constant and when the sysfs file is read the kernel will access
to invalid location.

Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order
to prevent the invalid memory access.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/19158499623cdf7f9c5efae1f13c9f1a918ff75f.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/accel/adxl372.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index e3ecbaee61f7..bc53af809d5d 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -998,17 +998,30 @@ static ssize_t adxl372_get_fifo_watermark(struct device *dev,
 	return sprintf(buf, "%d\n", st->watermark);
 }
 
-static IIO_CONST_ATTR(hwfifo_watermark_min, "1");
-static IIO_CONST_ATTR(hwfifo_watermark_max,
-		      __stringify(ADXL372_FIFO_SIZE));
+static ssize_t hwfifo_watermark_min_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	return sysfs_emit(buf, "%s\n", "1");
+}
+
+static ssize_t hwfifo_watermark_max_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	return sysfs_emit(buf, "%s\n", __stringify(ADXL372_FIFO_SIZE));
+}
+
+static IIO_DEVICE_ATTR_RO(hwfifo_watermark_min, 0);
+static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
 static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
 		       adxl372_get_fifo_watermark, NULL, 0);
 static IIO_DEVICE_ATTR(hwfifo_enabled, 0444,
 		       adxl372_get_fifo_enabled, NULL, 0);
 
 static const struct attribute *adxl372_fifo_attributes[] = {
-	&iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
-	&iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
+	&iio_dev_attr_hwfifo_watermark_min.dev_attr.attr,
+	&iio_dev_attr_hwfifo_watermark_max.dev_attr.attr,
 	&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
 	&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
 	NULL,
-- 
2.38.1

[PATCH 5.15 024/132] fbdev: smscufx: Fix several use-after-free bugs

[Greg Kroah-Hartman]

From: Hyunwoo Kim <imv4bel@gmail.com>

commit cc67482c9e5f2c80d62f623bcc347c29f9f648e1 upstream.

Several types of UAFs can occur when physically removing a USB device.

Adds ufx_ops_destroy() function to .fb_destroy of fb_ops, and
in this function, there is kref_put() that finally calls ufx_free().

This fix prevents multiple UAFs.

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/linux-fbdev/20221011153436.GA4446@ubuntu/
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/smscufx.c |   55 ++++++++++++++++++++++--------------------
 1 file changed, 30 insertions(+), 25 deletions(-)

--- a/drivers/video/fbdev/smscufx.c
+++ b/drivers/video/fbdev/smscufx.c
@@ -97,7 +97,6 @@ struct ufx_data {
 	struct kref kref;
 	int fb_count;
 	bool virtualized; /* true when physical usb device not present */
-	struct delayed_work free_framebuffer_work;
 	atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
 	atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */
 	u8 *edid; /* null until we read edid from hw or get from sysfs */
@@ -1116,15 +1115,24 @@ static void ufx_free(struct kref *kref)
 {
 	struct ufx_data *dev = container_of(kref, struct ufx_data, kref);
 
-	/* this function will wait for all in-flight urbs to complete */
-	if (dev->urbs.count > 0)
-		ufx_free_urb_list(dev);
+	kfree(dev);
+}
 
-	pr_debug("freeing ufx_data %p", dev);
+static void ufx_ops_destory(struct fb_info *info)
+{
+	struct ufx_data *dev = info->par;
+	int node = info->node;
 
-	kfree(dev);
+	/* Assume info structure is freed after this point */
+	framebuffer_release(info);
+
+	pr_debug("fb_info for /dev/fb%d has been freed", node);
+
+	/* release reference taken by kref_init in probe() */
+	kref_put(&dev->kref, ufx_free);
 }
 
+
 static void ufx_release_urb_work(struct work_struct *work)
 {
 	struct urb_node *unode = container_of(work, struct urb_node,
@@ -1133,14 +1141,9 @@ static void ufx_release_urb_work(struct
 	up(&unode->dev->urbs.limit_sem);
 }
 
-static void ufx_free_framebuffer_work(struct work_struct *work)
+static void ufx_free_framebuffer(struct ufx_data *dev)
 {
-	struct ufx_data *dev = container_of(work, struct ufx_data,
-					    free_framebuffer_work.work);
 	struct fb_info *info = dev->info;
-	int node = info->node;
-
-	unregister_framebuffer(info);
 
 	if (info->cmap.len != 0)
 		fb_dealloc_cmap(&info->cmap);
@@ -1152,11 +1155,6 @@ static void ufx_free_framebuffer_work(st
 
 	dev->info = NULL;
 
-	/* Assume info structure is freed after this point */
-	framebuffer_release(info);
-
-	pr_debug("fb_info for /dev/fb%d has been freed", node);
-
 	/* ref taken in probe() as part of registering framebfufer */
 	kref_put(&dev->kref, ufx_free);
 }
@@ -1168,11 +1166,13 @@ static int ufx_ops_release(struct fb_inf
 {
 	struct ufx_data *dev = info->par;
 
+	mutex_lock(&disconnect_mutex);
+
 	dev->fb_count--;
 
 	/* We can't free fb_info here - fbmem will touch it when we return */
 	if (dev->virtualized && (dev->fb_count == 0))
-		schedule_delayed_work(&dev->free_framebuffer_work, HZ);
+		ufx_free_framebuffer(dev);
 
 	if ((dev->fb_count == 0) && (info->fbdefio)) {
 		fb_deferred_io_cleanup(info);
@@ -1185,6 +1185,8 @@ static int ufx_ops_release(struct fb_inf
 
 	kref_put(&dev->kref, ufx_free);
 
+	mutex_unlock(&disconnect_mutex);
+
 	return 0;
 }
 
@@ -1291,6 +1293,7 @@ static const struct fb_ops ufx_ops = {
 	.fb_blank = ufx_ops_blank,
 	.fb_check_var = ufx_ops_check_var,
 	.fb_set_par = ufx_ops_set_par,
+	.fb_destroy = ufx_ops_destory,
 };
 
 /* Assumes &info->lock held by caller
@@ -1672,9 +1675,6 @@ static int ufx_usb_probe(struct usb_inte
 		goto destroy_modedb;
 	}
 
-	INIT_DELAYED_WORK(&dev->free_framebuffer_work,
-			  ufx_free_framebuffer_work);
-
 	retval = ufx_reg_read(dev, 0x3000, &id_rev);
 	check_warn_goto_error(retval, "error %d reading 0x3000 register from device", retval);
 	dev_dbg(dev->gdev, "ID_REV register value 0x%08x", id_rev);
@@ -1747,10 +1747,12 @@ e_nomem:
 static void ufx_usb_disconnect(struct usb_interface *interface)
 {
 	struct ufx_data *dev;
+	struct fb_info *info;
 
 	mutex_lock(&disconnect_mutex);
 
 	dev = usb_get_intfdata(interface);
+	info = dev->info;
 
 	pr_debug("USB disconnect starting\n");
 
@@ -1764,12 +1766,15 @@ static void ufx_usb_disconnect(struct us
 
 	/* if clients still have us open, will be freed on last close */
 	if (dev->fb_count == 0)
-		schedule_delayed_work(&dev->free_framebuffer_work, 0);
+		ufx_free_framebuffer(dev);
 
-	/* release reference taken by kref_init in probe() */
-	kref_put(&dev->kref, ufx_free);
+	/* this function will wait for all in-flight urbs to complete */
+	if (dev->urbs.count > 0)
+		ufx_free_urb_list(dev);
 
-	/* consider ufx_data freed */
+	pr_debug("freeing ufx_data %p", dev);
+
+	unregister_framebuffer(info);
 
 	mutex_unlock(&disconnect_mutex);
 }

[PATCH 5.15 025/132] cpufreq: intel_pstate: Read all MSRs on the target CPU

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit 8dbab94d45fb1094cefac7956b7fb987a36e2b12 upstream.

Some of the MSR accesses in intel_pstate are carried out on the CPU
that is running the code, but the values coming from them are used
for the performance scaling of the other CPUs.

This is problematic, for example, on hybrid platforms where
MSR_TURBO_RATIO_LIMIT for P-cores and E-cores is different, so the
values read from it on a P-core are generally not applicable to E-cores
and the other way around.

For this reason, make the driver access all MSRs on the target CPU on
platforms using the "core" pstate_funcs callbacks which is the case for
all of the hybrid platforms released to date.  For this purpose, pass
a CPU argument to the ->get_max(), ->get_max_physical(), ->get_min()
and ->get_turbo() pstate_funcs callbacks and from there pass it to
rdmsrl_on_cpu() or rdmsrl_safe_on_cpu() to access the MSR on the target
CPU.

Fixes: 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/intel_pstate.c |   66 ++++++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 33 deletions(-)

--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -277,10 +277,10 @@ static struct cpudata **all_cpu_data;
  * structure is used to store those callbacks.
  */
 struct pstate_funcs {
-	int (*get_max)(void);
-	int (*get_max_physical)(void);
-	int (*get_min)(void);
-	int (*get_turbo)(void);
+	int (*get_max)(int cpu);
+	int (*get_max_physical)(int cpu);
+	int (*get_min)(int cpu);
+	int (*get_turbo)(int cpu);
 	int (*get_scaling)(void);
 	int (*get_cpu_scaling)(int cpu);
 	int (*get_aperf_mperf_shift)(void);
@@ -528,12 +528,12 @@ static void intel_pstate_hybrid_hwp_adju
 {
 	int perf_ctl_max_phys = cpu->pstate.max_pstate_physical;
 	int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling;
-	int perf_ctl_turbo = pstate_funcs.get_turbo();
+	int perf_ctl_turbo = pstate_funcs.get_turbo(cpu->cpu);
 	int turbo_freq = perf_ctl_turbo * perf_ctl_scaling;
 	int scaling = cpu->pstate.scaling;
 
 	pr_debug("CPU%d: perf_ctl_max_phys = %d\n", cpu->cpu, perf_ctl_max_phys);
-	pr_debug("CPU%d: perf_ctl_max = %d\n", cpu->cpu, pstate_funcs.get_max());
+	pr_debug("CPU%d: perf_ctl_max = %d\n", cpu->cpu, pstate_funcs.get_max(cpu->cpu));
 	pr_debug("CPU%d: perf_ctl_turbo = %d\n", cpu->cpu, perf_ctl_turbo);
 	pr_debug("CPU%d: perf_ctl_scaling = %d\n", cpu->cpu, perf_ctl_scaling);
 	pr_debug("CPU%d: HWP_CAP guaranteed = %d\n", cpu->cpu, cpu->pstate.max_pstate);
@@ -1581,7 +1581,7 @@ static void intel_pstate_hwp_enable(stru
 		cpudata->epp_default = intel_pstate_get_epp(cpudata, 0);
 }
 
-static int atom_get_min_pstate(void)
+static int atom_get_min_pstate(int not_used)
 {
 	u64 value;
 
@@ -1589,7 +1589,7 @@ static int atom_get_min_pstate(void)
 	return (value >> 8) & 0x7F;
 }
 
-static int atom_get_max_pstate(void)
+static int atom_get_max_pstate(int not_used)
 {
 	u64 value;
 
@@ -1597,7 +1597,7 @@ static int atom_get_max_pstate(void)
 	return (value >> 16) & 0x7F;
 }
 
-static int atom_get_turbo_pstate(void)
+static int atom_get_turbo_pstate(int not_used)
 {
 	u64 value;
 
@@ -1675,23 +1675,23 @@ static void atom_get_vid(struct cpudata
 	cpudata->vid.turbo = value & 0x7f;
 }
 
-static int core_get_min_pstate(void)
+static int core_get_min_pstate(int cpu)
 {
 	u64 value;
 
-	rdmsrl(MSR_PLATFORM_INFO, value);
+	rdmsrl_on_cpu(cpu, MSR_PLATFORM_INFO, &value);
 	return (value >> 40) & 0xFF;
 }
 
-static int core_get_max_pstate_physical(void)
+static int core_get_max_pstate_physical(int cpu)
 {
 	u64 value;
 
-	rdmsrl(MSR_PLATFORM_INFO, value);
+	rdmsrl_on_cpu(cpu, MSR_PLATFORM_INFO, &value);
 	return (value >> 8) & 0xFF;
 }
 
-static int core_get_tdp_ratio(u64 plat_info)
+static int core_get_tdp_ratio(int cpu, u64 plat_info)
 {
 	/* Check how many TDP levels present */
 	if (plat_info & 0x600000000) {
@@ -1701,13 +1701,13 @@ static int core_get_tdp_ratio(u64 plat_i
 		int err;
 
 		/* Get the TDP level (0, 1, 2) to get ratios */
-		err = rdmsrl_safe(MSR_CONFIG_TDP_CONTROL, &tdp_ctrl);
+		err = rdmsrl_safe_on_cpu(cpu, MSR_CONFIG_TDP_CONTROL, &tdp_ctrl);
 		if (err)
 			return err;
 
 		/* TDP MSR are continuous starting at 0x648 */
 		tdp_msr = MSR_CONFIG_TDP_NOMINAL + (tdp_ctrl & 0x03);
-		err = rdmsrl_safe(tdp_msr, &tdp_ratio);
+		err = rdmsrl_safe_on_cpu(cpu, tdp_msr, &tdp_ratio);
 		if (err)
 			return err;
 
@@ -1724,7 +1724,7 @@ static int core_get_tdp_ratio(u64 plat_i
 	return -ENXIO;
 }
 
-static int core_get_max_pstate(void)
+static int core_get_max_pstate(int cpu)
 {
 	u64 tar;
 	u64 plat_info;
@@ -1732,10 +1732,10 @@ static int core_get_max_pstate(void)
 	int tdp_ratio;
 	int err;
 
-	rdmsrl(MSR_PLATFORM_INFO, plat_info);
+	rdmsrl_on_cpu(cpu, MSR_PLATFORM_INFO, &plat_info);
 	max_pstate = (plat_info >> 8) & 0xFF;
 
-	tdp_ratio = core_get_tdp_ratio(plat_info);
+	tdp_ratio = core_get_tdp_ratio(cpu, plat_info);
 	if (tdp_ratio <= 0)
 		return max_pstate;
 
@@ -1744,7 +1744,7 @@ static int core_get_max_pstate(void)
 		return tdp_ratio;
 	}
 
-	err = rdmsrl_safe(MSR_TURBO_ACTIVATION_RATIO, &tar);
+	err = rdmsrl_safe_on_cpu(cpu, MSR_TURBO_ACTIVATION_RATIO, &tar);
 	if (!err) {
 		int tar_levels;
 
@@ -1759,13 +1759,13 @@ static int core_get_max_pstate(void)
 	return max_pstate;
 }
 
-static int core_get_turbo_pstate(void)
+static int core_get_turbo_pstate(int cpu)
 {
 	u64 value;
 	int nont, ret;
 
-	rdmsrl(MSR_TURBO_RATIO_LIMIT, value);
-	nont = core_get_max_pstate();
+	rdmsrl_on_cpu(cpu, MSR_TURBO_RATIO_LIMIT, &value);
+	nont = core_get_max_pstate(cpu);
 	ret = (value) & 255;
 	if (ret <= nont)
 		ret = nont;
@@ -1793,13 +1793,13 @@ static int knl_get_aperf_mperf_shift(voi
 	return 10;
 }
 
-static int knl_get_turbo_pstate(void)
+static int knl_get_turbo_pstate(int cpu)
 {
 	u64 value;
 	int nont, ret;
 
-	rdmsrl(MSR_TURBO_RATIO_LIMIT, value);
-	nont = core_get_max_pstate();
+	rdmsrl_on_cpu(cpu, MSR_TURBO_RATIO_LIMIT, &value);
+	nont = core_get_max_pstate(cpu);
 	ret = (((value) >> 8) & 0xFF);
 	if (ret <= nont)
 		ret = nont;
@@ -1866,10 +1866,10 @@ static void intel_pstate_max_within_limi
 
 static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 {
-	int perf_ctl_max_phys = pstate_funcs.get_max_physical();
+	int perf_ctl_max_phys = pstate_funcs.get_max_physical(cpu->cpu);
 	int perf_ctl_scaling = pstate_funcs.get_scaling();
 
-	cpu->pstate.min_pstate = pstate_funcs.get_min();
+	cpu->pstate.min_pstate = pstate_funcs.get_min(cpu->cpu);
 	cpu->pstate.max_pstate_physical = perf_ctl_max_phys;
 	cpu->pstate.perf_ctl_scaling = perf_ctl_scaling;
 
@@ -1885,8 +1885,8 @@ static void intel_pstate_get_cpu_pstates
 		}
 	} else {
 		cpu->pstate.scaling = perf_ctl_scaling;
-		cpu->pstate.max_pstate = pstate_funcs.get_max();
-		cpu->pstate.turbo_pstate = pstate_funcs.get_turbo();
+		cpu->pstate.max_pstate = pstate_funcs.get_max(cpu->cpu);
+		cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(cpu->cpu);
 	}
 
 	if (cpu->pstate.scaling == perf_ctl_scaling) {
@@ -3063,9 +3063,9 @@ static unsigned int force_load __initdat
 
 static int __init intel_pstate_msrs_not_valid(void)
 {
-	if (!pstate_funcs.get_max() ||
-	    !pstate_funcs.get_min() ||
-	    !pstate_funcs.get_turbo())
+	if (!pstate_funcs.get_max(0) ||
+	    !pstate_funcs.get_min(0) ||
+	    !pstate_funcs.get_turbo(0))
 		return -ENODEV;
 
 	return 0;

[PATCH 5.15 026/132] cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit f5c8cf2a4992dd929fa0c2f25c09ee69b8dcbce1 upstream.

Commit 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP
calibration") attempted to use the information from CPPC (the nominal
performance in particular) to obtain the scaling factor allowing the
frequency to be computed if the HWP performance level of the given CPU
is known or vice versa.

However, it turns out that on some platforms this doesn't work, because
the CPPC information on them does not align with the contents of the
MSR_HWP_CAPABILITIES registers.

This basically means that the only way to make intel_pstate work on all
of the hybrid platforms to date is to use the observation that on all
of them the scaling factor between the HWP performance levels and
frequency for P-cores is 78741 (approximately 100000/1.27).  For
E-cores it is 100000, which is the same as for all of the non-hybrid
"core" platforms and does not require any changes.

Accordingly, make intel_pstate use 78741 as the scaling factor between
HWP performance levels and frequency for P-cores on all hybrid platforms
and drop the dependency of the HWP calibration code on CPPC.

Fixes: 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/intel_pstate.c |   69 ++++++++---------------------------------
 1 file changed, 15 insertions(+), 54 deletions(-)

--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -27,6 +27,7 @@
 #include <linux/pm_qos.h>
 #include <trace/events/power.h>
 
+#include <asm/cpu.h>
 #include <asm/div64.h>
 #include <asm/msr.h>
 #include <asm/cpu_device_id.h>
@@ -395,16 +396,6 @@ static int intel_pstate_get_cppc_guarant
 
 	return cppc_perf.nominal_perf;
 }
-
-static u32 intel_pstate_cppc_nominal(int cpu)
-{
-	u64 nominal_perf;
-
-	if (cppc_get_nominal_perf(cpu, &nominal_perf))
-		return 0;
-
-	return nominal_perf;
-}
 #else /* CONFIG_ACPI_CPPC_LIB */
 static inline void intel_pstate_set_itmt_prio(int cpu)
 {
@@ -529,34 +520,17 @@ static void intel_pstate_hybrid_hwp_adju
 	int perf_ctl_max_phys = cpu->pstate.max_pstate_physical;
 	int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling;
 	int perf_ctl_turbo = pstate_funcs.get_turbo(cpu->cpu);
-	int turbo_freq = perf_ctl_turbo * perf_ctl_scaling;
 	int scaling = cpu->pstate.scaling;
 
 	pr_debug("CPU%d: perf_ctl_max_phys = %d\n", cpu->cpu, perf_ctl_max_phys);
-	pr_debug("CPU%d: perf_ctl_max = %d\n", cpu->cpu, pstate_funcs.get_max(cpu->cpu));
 	pr_debug("CPU%d: perf_ctl_turbo = %d\n", cpu->cpu, perf_ctl_turbo);
 	pr_debug("CPU%d: perf_ctl_scaling = %d\n", cpu->cpu, perf_ctl_scaling);
 	pr_debug("CPU%d: HWP_CAP guaranteed = %d\n", cpu->cpu, cpu->pstate.max_pstate);
 	pr_debug("CPU%d: HWP_CAP highest = %d\n", cpu->cpu, cpu->pstate.turbo_pstate);
 	pr_debug("CPU%d: HWP-to-frequency scaling factor: %d\n", cpu->cpu, scaling);
 
-	/*
-	 * If the product of the HWP performance scaling factor and the HWP_CAP
-	 * highest performance is greater than the maximum turbo frequency
-	 * corresponding to the pstate_funcs.get_turbo() return value, the
-	 * scaling factor is too high, so recompute it to make the HWP_CAP
-	 * highest performance correspond to the maximum turbo frequency.
-	 */
-	cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * scaling;
-	if (turbo_freq < cpu->pstate.turbo_freq) {
-		cpu->pstate.turbo_freq = turbo_freq;
-		scaling = DIV_ROUND_UP(turbo_freq, cpu->pstate.turbo_pstate);
-		cpu->pstate.scaling = scaling;
-
-		pr_debug("CPU%d: refined HWP-to-frequency scaling factor: %d\n",
-			 cpu->cpu, scaling);
-	}
-
+	cpu->pstate.turbo_freq = rounddown(cpu->pstate.turbo_pstate * scaling,
+					   perf_ctl_scaling);
 	cpu->pstate.max_freq = rounddown(cpu->pstate.max_pstate * scaling,
 					 perf_ctl_scaling);
 
@@ -1806,37 +1780,24 @@ static int knl_get_turbo_pstate(int cpu)
 	return ret;
 }
 
-#ifdef CONFIG_ACPI_CPPC_LIB
-static u32 hybrid_ref_perf;
-
-static int hybrid_get_cpu_scaling(int cpu)
+static void hybrid_get_type(void *data)
 {
-	return DIV_ROUND_UP(core_get_scaling() * hybrid_ref_perf,
-			    intel_pstate_cppc_nominal(cpu));
+	u8 *cpu_type = data;
+
+	*cpu_type = get_this_hybrid_cpu_type();
 }
 
-static void intel_pstate_cppc_set_cpu_scaling(void)
+static int hybrid_get_cpu_scaling(int cpu)
 {
-	u32 min_nominal_perf = U32_MAX;
-	int cpu;
+	u8 cpu_type = 0;
 
-	for_each_present_cpu(cpu) {
-		u32 nominal_perf = intel_pstate_cppc_nominal(cpu);
+	smp_call_function_single(cpu, hybrid_get_type, &cpu_type, 1);
+	/* P-cores have a smaller perf level-to-freqency scaling factor. */
+	if (cpu_type == 0x40)
+		return 78741;
 
-		if (nominal_perf && nominal_perf < min_nominal_perf)
-			min_nominal_perf = nominal_perf;
-	}
-
-	if (min_nominal_perf < U32_MAX) {
-		hybrid_ref_perf = min_nominal_perf;
-		pstate_funcs.get_cpu_scaling = hybrid_get_cpu_scaling;
-	}
+	return core_get_scaling();
 }
-#else
-static inline void intel_pstate_cppc_set_cpu_scaling(void)
-{
-}
-#endif /* CONFIG_ACPI_CPPC_LIB */
 
 static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate)
 {
@@ -3281,7 +3242,7 @@ static int __init intel_pstate_init(void
 				default_driver = &intel_pstate;
 
 			if (boot_cpu_has(X86_FEATURE_HYBRID_CPU))
-				intel_pstate_cppc_set_cpu_scaling();
+				pstate_funcs.get_cpu_scaling = hybrid_get_cpu_scaling;
 
 			goto hwp_cpu_matched;
 		}

[PATCH 5.15 027/132] fs/binfmt_elf: Fix memory leak in load_elf_binary()

[Greg Kroah-Hartman]

From: Li Zetao <lizetao1@huawei.com>

commit 594d2a14f2168c09b13b114c3d457aa939403e52 upstream.

There is a memory leak reported by kmemleak:

  unreferenced object 0xffff88817104ef80 (size 224):
    comm "xfs_admin", pid 47165, jiffies 4298708825 (age 1333.476s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      60 a8 b3 00 81 88 ff ff a8 10 5a 00 81 88 ff ff  `.........Z.....
    backtrace:
      [<ffffffff819171e1>] __alloc_file+0x21/0x250
      [<ffffffff81918061>] alloc_empty_file+0x41/0xf0
      [<ffffffff81948cda>] path_openat+0xea/0x3d30
      [<ffffffff8194ec89>] do_filp_open+0x1b9/0x290
      [<ffffffff8192660e>] do_open_execat+0xce/0x5b0
      [<ffffffff81926b17>] open_exec+0x27/0x50
      [<ffffffff81a69250>] load_elf_binary+0x510/0x3ed0
      [<ffffffff81927759>] bprm_execve+0x599/0x1240
      [<ffffffff8192a997>] do_execveat_common.isra.0+0x4c7/0x680
      [<ffffffff8192b078>] __x64_sys_execve+0x88/0xb0
      [<ffffffff83bbf0a5>] do_syscall_64+0x35/0x80

If "interp_elf_ex" fails to allocate memory in load_elf_binary(),
the program will take the "out_free_ph" error handing path,
resulting in "interpreter" file resource is not released.

Fix it by adding an error handing path "out_free_file", which will
release the file resource when "interp_elf_ex" failed to allocate
memory.

Fixes: 0693ffebcfe5 ("fs/binfmt_elf.c: allocate less for static executable")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221024154421.982230-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/binfmt_elf.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -910,7 +910,7 @@ static int load_elf_binary(struct linux_
 		interp_elf_ex = kmalloc(sizeof(*interp_elf_ex), GFP_KERNEL);
 		if (!interp_elf_ex) {
 			retval = -ENOMEM;
-			goto out_free_ph;
+			goto out_free_file;
 		}
 
 		/* Get the exec headers */
@@ -1331,6 +1331,7 @@ out:
 out_free_dentry:
 	kfree(interp_elf_ex);
 	kfree(interp_elf_phdata);
+out_free_file:
 	allow_write_access(interpreter);
 	if (interpreter)
 		fput(interpreter);

[PATCH 5.15 028/132] exec: Copy oldsighand->action under spin-lock

[Greg Kroah-Hartman]

From: Bernd Edlinger <bernd.edlinger@hotmail.de>

commit 5bf2fedca8f59379025b0d52f917b9ddb9bfe17e upstream.

unshare_sighand should only access oldsighand->action
while holding oldsighand->siglock, to make sure that
newsighand->action is in a consistent state.

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/AM8PR10MB470871DEBD1DED081F9CC391E4389@AM8PR10MB4708.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/exec.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1198,11 +1198,11 @@ static int unshare_sighand(struct task_s
 			return -ENOMEM;
 
 		refcount_set(&newsighand->count, 1);
-		memcpy(newsighand->action, oldsighand->action,
-		       sizeof(newsighand->action));
 
 		write_lock_irq(&tasklist_lock);
 		spin_lock(&oldsighand->siglock);
+		memcpy(newsighand->action, oldsighand->action,
+		       sizeof(newsighand->action));
 		rcu_assign_pointer(me->sighand, newsighand);
 		spin_unlock(&oldsighand->siglock);
 		write_unlock_irq(&tasklist_lock);

[PATCH 5.15 029/132] mac802154: Fix LQI recording

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

commit 5a5c4e06fd03b595542d5590f2bc05a6b7fc5c2b upstream.

Back in 2014, the LQI was saved in the skb control buffer (skb->cb, or
mac_cb(skb)) without any actual reset of this area prior to its use.

As part of a useful rework of the use of this region, 32edc40ae65c
("ieee802154: change _cb handling slightly") introduced mac_cb_init() to
basically memset the cb field to 0. In particular, this new function got
called at the beginning of mac802154_parse_frame_start(), right before
the location where the buffer got actually filled.

What went through unnoticed however, is the fact that the very first
helper called by device drivers in the receive path already used this
area to save the LQI value for later extraction. Resetting the cb field
"so late" led to systematically zeroing the LQI.

If we consider the reset of the cb field needed, we can make it as soon
as we get an skb from a device driver, right before storing the LQI,
as is the very first time we need to write something there.

Cc: stable@vger.kernel.org
Fixes: 32edc40ae65c ("ieee802154: change _cb handling slightly")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221020142535.1038885-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac802154/rx.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/net/mac802154/rx.c
+++ b/net/mac802154/rx.c
@@ -132,7 +132,7 @@ static int
 ieee802154_parse_frame_start(struct sk_buff *skb, struct ieee802154_hdr *hdr)
 {
 	int hlen;
-	struct ieee802154_mac_cb *cb = mac_cb_init(skb);
+	struct ieee802154_mac_cb *cb = mac_cb(skb);
 
 	skb_reset_mac_header(skb);
 
@@ -294,8 +294,9 @@ void
 ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, u8 lqi)
 {
 	struct ieee802154_local *local = hw_to_local(hw);
+	struct ieee802154_mac_cb *cb = mac_cb_init(skb);
 
-	mac_cb(skb)->lqi = lqi;
+	cb->lqi = lqi;
 	skb->pkt_type = IEEE802154_RX_MSG;
 	skb_queue_tail(&local->skb_queue, skb);
 	tasklet_schedule(&local->tasklet);

[PATCH 5.15 030/132] scsi: qla2xxx: Use transport-defined speed mask for supported_speeds

[Greg Kroah-Hartman]

From: Manish Rangankar <mrangankar@marvell.com>

commit 0b863257c17c5f57a41e0a48de140ed026957a63 upstream.

One of the sysfs values reported for supported_speeds was not valid (20Gb/s
reported instead of 64Gb/s).  Instead of driver internal speed mask
definition, use speed mask defined in transport_fc for reporting
host->supported_speeds.

Link: https://lore.kernel.org/r/20220927115946.17559-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla2xxx/qla_attr.c |   28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -3318,11 +3318,34 @@ struct fc_function_template qla2xxx_tran
 	.bsg_timeout = qla24xx_bsg_timeout,
 };
 
+static uint
+qla2x00_get_host_supported_speeds(scsi_qla_host_t *vha, uint speeds)
+{
+	uint supported_speeds = FC_PORTSPEED_UNKNOWN;
+
+	if (speeds & FDMI_PORT_SPEED_64GB)
+		supported_speeds |= FC_PORTSPEED_64GBIT;
+	if (speeds & FDMI_PORT_SPEED_32GB)
+		supported_speeds |= FC_PORTSPEED_32GBIT;
+	if (speeds & FDMI_PORT_SPEED_16GB)
+		supported_speeds |= FC_PORTSPEED_16GBIT;
+	if (speeds & FDMI_PORT_SPEED_8GB)
+		supported_speeds |= FC_PORTSPEED_8GBIT;
+	if (speeds & FDMI_PORT_SPEED_4GB)
+		supported_speeds |= FC_PORTSPEED_4GBIT;
+	if (speeds & FDMI_PORT_SPEED_2GB)
+		supported_speeds |= FC_PORTSPEED_2GBIT;
+	if (speeds & FDMI_PORT_SPEED_1GB)
+		supported_speeds |= FC_PORTSPEED_1GBIT;
+
+	return supported_speeds;
+}
+
 void
 qla2x00_init_host_attr(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
-	u32 speeds = FC_PORTSPEED_UNKNOWN;
+	u32 speeds = 0, fdmi_speed = 0;
 
 	fc_host_dev_loss_tmo(vha->host) = ha->port_down_retry_count;
 	fc_host_node_name(vha->host) = wwn_to_u64(vha->node_name);
@@ -3332,7 +3355,8 @@ qla2x00_init_host_attr(scsi_qla_host_t *
 	fc_host_max_npiv_vports(vha->host) = ha->max_npiv_vports;
 	fc_host_npiv_vports_inuse(vha->host) = ha->cur_vport_count;
 
-	speeds = qla25xx_fdmi_port_speed_capability(ha);
+	fdmi_speed = qla25xx_fdmi_port_speed_capability(ha);
+	speeds = qla2x00_get_host_supported_speeds(vha, fdmi_speed);
 
 	fc_host_supported_speeds(vha->host) = speeds;
 }

[PATCH 5.15 031/132] drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume

[Greg Kroah-Hartman]

From: Prike Liang <Prike.Liang@amd.com>

commit d61e1d1d5225a9baeb995bcbdb904f66f70ed87e upstream.

In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -3185,6 +3185,15 @@ static int amdgpu_device_ip_resume_phase
 			return r;
 		}
 		adev->ip_blocks[i].status.hw = true;
+
+		if (adev->in_s0ix && adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_SMC) {
+			/* disable gfxoff for IP resume. The gfxoff will be re-enabled in
+			 * amdgpu_device_resume() after IP resume.
+			 */
+			amdgpu_gfx_off_ctrl(adev, false);
+			DRM_DEBUG("will disable gfxoff for re-initializing other blocks\n");
+		}
+
 	}
 
 	return 0;
@@ -4114,6 +4123,13 @@ int amdgpu_device_resume(struct drm_devi
 	/* Make sure IB tests flushed */
 	flush_delayed_work(&adev->delayed_init_work);
 
+	if (adev->in_s0ix) {
+		/* re-enable gfxoff after IP resume. This re-enables gfxoff after
+		 * it was disabled for IP resume in amdgpu_device_ip_resume_phase2().
+		 */
+		amdgpu_gfx_off_ctrl(adev, true);
+		DRM_DEBUG("will enable gfxoff for the mission mode\n");
+	}
 	if (fbcon)
 		amdgpu_fbdev_set_suspend(adev, 0);
 

[PATCH 5.15 032/132] drm/msm/dsi: fix memory corruption with too many bridges

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit 2e786eb2f9cebb07e317226b60054df510b60c65 upstream.

Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Cc: stable@vger.kernel.org	# 4.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/502668/
Link: https://lore.kernel.org/r/20220913085320.8577-4-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/msm/dsi/dsi.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/gpu/drm/msm/dsi/dsi.c
+++ b/drivers/gpu/drm/msm/dsi/dsi.c
@@ -212,6 +212,12 @@ int msm_dsi_modeset_init(struct msm_dsi
 		return -EINVAL;
 
 	priv = dev->dev_private;
+
+	if (priv->num_bridges == ARRAY_SIZE(priv->bridges)) {
+		DRM_DEV_ERROR(dev->dev, "too many bridges\n");
+		return -ENOSPC;
+	}
+
 	msm_dsi->dev = dev;
 
 	ret = msm_dsi_host_modeset_init(msm_dsi->host, dev);

[PATCH 5.15 033/132] drm/msm/hdmi: fix memory corruption with too many bridges

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit 4c1294da6aed1f16d47a417dcfe6602833c3c95c upstream.

Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.

Fixes: a3376e3ec81c ("drm/msm: convert to drm_bridge")
Cc: stable@vger.kernel.org	# 3.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/502670/
Link: https://lore.kernel.org/r/20220913085320.8577-5-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -295,6 +295,11 @@ int msm_hdmi_modeset_init(struct hdmi *h
 	struct platform_device *pdev = hdmi->pdev;
 	int ret;
 
+	if (priv->num_bridges == ARRAY_SIZE(priv->bridges)) {
+		DRM_DEV_ERROR(dev->dev, "too many bridges\n");
+		return -ENOSPC;
+	}
+
 	hdmi->dev = dev;
 	hdmi->encoder = encoder;
 

[PATCH 5.15 034/132] drm/msm/dp: fix IRQ lifetime

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit a79343dcaba4b11adb57350e0b6426906a9b658e upstream.

Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding of the aggregate device is deferred.

This is specifically true for the DP IRQ, which will otherwise remain
requested so that the next bind attempt fails when requesting the IRQ a
second time.

Since commit c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus")
this can happen when the aux-bus panel driver has not yet been loaded so
that probe is deferred.

Fix this by tying the device-managed lifetime of the DP IRQ to the DRM
device so that it is released when bind fails.

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Cc: stable@vger.kernel.org      # 5.10
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502679/
Link: https://lore.kernel.org/r/20220913085320.8577-6-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1229,7 +1229,7 @@ int dp_display_request_irq(struct msm_dp
 		return -EINVAL;
 	}
 
-	rc = devm_request_irq(&dp->pdev->dev, dp->irq,
+	rc = devm_request_irq(dp_display->drm_dev->dev, dp->irq,
 			dp_display_irq_handler,
 			IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
 	if (rc < 0) {

[PATCH 5.15 035/132] coresight: cti: Fix hang in cti_disable_hw()

[Greg Kroah-Hartman]

From: James Clark <james.clark@arm.com>

commit 6746eae4bbaddcc16b40efb33dab79210828b3ce upstream.

cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.

Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:

  perf record -e cs_etm//u -- ls

This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b28 ("coresight:
cti: Correct the parameter for pm_runtime_put")

With lock and scheduler debugging enabled the following is output:

   coresight cti_sys0: cti_enable_hw -- dev:cti_sys0  parent: 20020000.cti
   BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
   in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
   preempt_count: 2, expected: 0
   RCU nest depth: 0, expected: 0
   INFO: lockdep is turned off.
   irq event stamp: 0
   hardirqs last  enabled at (0): [<0000000000000000>] 0x0
   hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
   softirqs last  enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
   softirqs last disabled at (0): [<0000000000000000>] 0x0
   CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
   Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
   Call trace:
    dump_backtrace+0x134/0x140
    show_stack+0x20/0x58
    dump_stack_lvl+0x8c/0xb8
    dump_stack+0x18/0x34
    __might_resched+0x180/0x228
    __might_sleep+0x50/0x88
    __pm_runtime_resume+0xac/0xb0
    cti_enable+0x44/0x120
    coresight_control_assoc_ectdev+0xc0/0x150
    coresight_enable_path+0xb4/0x288
    etm_event_start+0x138/0x170
    etm_event_add+0x48/0x70
    event_sched_in.isra.122+0xb4/0x280
    merge_sched_in+0x1fc/0x3d0
    visit_groups_merge.constprop.137+0x16c/0x4b0
    ctx_sched_in+0x114/0x1f0
    perf_event_sched_in+0x60/0x90
    ctx_resched+0x68/0xb0
    perf_event_exec+0x138/0x508
    begin_new_exec+0x52c/0xd40
    load_elf_binary+0x6b8/0x17d0
    bprm_execve+0x360/0x7f8
    do_execveat_common.isra.47+0x218/0x238
    __arm64_sys_execve+0x48/0x60
    invoke_syscall+0x4c/0x110
    el0_svc_common.constprop.4+0xfc/0x120
    do_el0_svc+0x34/0xc0
    el0_svc+0x40/0x98
    el0t_64_sync_handler+0x98/0xc0
    el0t_64_sync+0x170/0x174

Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.

Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Cc: stable <stable@kernel.org>
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
[ Fix build warnings ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwtracing/coresight/coresight-cti-core.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/hwtracing/coresight/coresight-cti-core.c
+++ b/drivers/hwtracing/coresight/coresight-cti-core.c
@@ -90,11 +90,9 @@ void cti_write_all_hw_regs(struct cti_dr
 static int cti_enable_hw(struct cti_drvdata *drvdata)
 {
 	struct cti_config *config = &drvdata->config;
-	struct device *dev = &drvdata->csdev->dev;
 	unsigned long flags;
 	int rc = 0;
 
-	pm_runtime_get_sync(dev->parent);
 	spin_lock_irqsave(&drvdata->spinlock, flags);
 
 	/* no need to do anything if enabled or unpowered*/
@@ -119,7 +117,6 @@ cti_state_unchanged:
 	/* cannot enable due to error */
 cti_err_not_enabled:
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
-	pm_runtime_put(dev->parent);
 	return rc;
 }
 
@@ -153,7 +150,6 @@ cti_hp_not_enabled:
 static int cti_disable_hw(struct cti_drvdata *drvdata)
 {
 	struct cti_config *config = &drvdata->config;
-	struct device *dev = &drvdata->csdev->dev;
 	struct coresight_device *csdev = drvdata->csdev;
 
 	spin_lock(&drvdata->spinlock);
@@ -175,7 +171,6 @@ static int cti_disable_hw(struct cti_drv
 	coresight_disclaim_device_unlocked(csdev);
 	CS_LOCK(drvdata->base);
 	spin_unlock(&drvdata->spinlock);
-	pm_runtime_put(dev->parent);
 	return 0;
 
 	/* not disabled this call */

[PATCH 5.15 036/132] mmc: sdhci_am654: select, not depends REGMAP_MMIO

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit 8d280b1df87e0b3d1355aeac7e62b62214b93f1c upstream.

REGMAP_MMIO is not user-configurable, so we can only satisfy this
dependency by enabling some other Kconfig symbol that properly 'select's
it. Use select like everybody else.

Noticed when trying to enable this driver for compile testing.

Fixes: 59592cc1f593 ("mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221024180300.2292208-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/Kconfig |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -1069,9 +1069,10 @@ config MMC_SDHCI_OMAP
 
 config MMC_SDHCI_AM654
 	tristate "Support for the SDHCI Controller in TI's AM654 SOCs"
-	depends on MMC_SDHCI_PLTFM && OF && REGMAP_MMIO
+	depends on MMC_SDHCI_PLTFM && OF
 	select MMC_SDHCI_IO_ACCESSORS
 	select MMC_CQHCI
+	select REGMAP_MMIO
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in TI's AM654 SOCs. The controller supports

[PATCH 5.15 037/132] mmc: core: Fix kernel panic when remove non-standard SDIO card

[Greg Kroah-Hartman]

From: Matthew Ma <mahongwei@zeku.com>

commit 9972e6b404884adae9eec7463e30d9b3c9a70b18 upstream.

SDIO tuple is only allocated for standard SDIO card, especially it causes
memory corruption issues when the non-standard SDIO card has removed, which
is because the card device's reference counter does not increase for it at
sdio_init_func(), but all SDIO card device reference counter gets decreased
at sdio_release_func().

Fixes: 6f51be3d37df ("sdio: allow non-standard SDIO cards")
Signed-off-by: Matthew Ma <mahongwei@zeku.com>
Reviewed-by: Weizhao Ouyang <ouyangweizhao@zeku.com>
Reviewed-by: John Wang <wangdayu@zeku.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221014034951.2300386-1-ouyangweizhao@zeku.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/sdio_bus.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -290,7 +290,8 @@ static void sdio_release_func(struct dev
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
 
-	sdio_free_func_cis(func);
+	if (!(func->card->quirks & MMC_QUIRK_NONSTD_SDIO))
+		sdio_free_func_cis(func);
 
 	kfree(func->info);
 	kfree(func->tmpbuf);

[PATCH 5.15 038/132] mmc: sdhci-pci-core: Disable ES for ASUS BIOS on Jasper Lake

[Greg Kroah-Hartman]

From: Patrick Thompson <ptf@google.com>

commit 9dc0033e4658d6f9d9952c3c0c6be3ec25bc2985 upstream.

Enhanced Strobe (ES) does not work correctly on the ASUS 1100 series of
devices. Jasper Lake eMMCs (pci_id 8086:4dc4) are supposed to support
ES. There are also two system families under the series, thus this is
being scoped to the ASUS BIOS.

The failing ES prevents the installer from writing to disk. Falling back
to HS400 without ES fixes the issue.

Signed-off-by: Patrick Thompson <ptf@google.com>
Fixes: 315e3bd7ac19 ("mmc: sdhci-pci: Add support for Intel JSL")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221013210017.3751025-1-ptf@google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-pci-core.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -978,6 +978,12 @@ static bool glk_broken_cqhci(struct sdhc
 		dmi_match(DMI_SYS_VENDOR, "IRBIS"));
 }
 
+static bool jsl_broken_hs400es(struct sdhci_pci_slot *slot)
+{
+	return slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_JSL_EMMC &&
+			dmi_match(DMI_BIOS_VENDOR, "ASUSTeK COMPUTER INC.");
+}
+
 static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot)
 {
 	int ret = byt_emmc_probe_slot(slot);
@@ -986,9 +992,11 @@ static int glk_emmc_probe_slot(struct sd
 		slot->host->mmc->caps2 |= MMC_CAP2_CQE;
 
 	if (slot->chip->pdev->device != PCI_DEVICE_ID_INTEL_GLK_EMMC) {
-		slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES;
-		slot->host->mmc_host_ops.hs400_enhanced_strobe =
-						intel_hs400_enhanced_strobe;
+		if (!jsl_broken_hs400es(slot)) {
+			slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES;
+			slot->host->mmc_host_ops.hs400_enhanced_strobe =
+							intel_hs400_enhanced_strobe;
+		}
 		slot->host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
 	}
 

[PATCH 5.15 039/132] mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus

[Greg Kroah-Hartman]

From: Sascha Hauer <s.hauer@pengutronix.de>

commit 1ed5c3b22fc78735c539e4767832aea58db6761c upstream.

The core issues the warning "drop HS400 support since no 8-bit bus" when
one of the ESDHC_FLAG_HS400* flags is set on a non 8bit capable host. To
avoid this warning set these flags only on hosts that actually can do
8bit, i.e. have bus-width = <8> set in the device tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Fixes: 029e2476f9e6 ("mmc: sdhci-esdhc-imx: add HS400_ES support for i.MX8QXP")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221013093248.2220802-1-s.hauer@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1643,6 +1643,10 @@ static int sdhci_esdhc_imx_probe(struct
 		host->mmc_host_ops.execute_tuning = usdhc_execute_tuning;
 	}
 
+	err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
+	if (err)
+		goto disable_ahb_clk;
+
 	if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
 		sdhci_esdhc_ops.platform_execute_tuning =
 					esdhc_executing_tuning;
@@ -1650,13 +1654,15 @@ static int sdhci_esdhc_imx_probe(struct
 	if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
 		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
 
-	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
+	if (host->caps & MMC_CAP_8_BIT_DATA &&
+	    imx_data->socdata->flags & ESDHC_FLAG_HS400)
 		host->mmc->caps2 |= MMC_CAP2_HS400;
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23)
 		host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN;
 
-	if (imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) {
+	if (host->caps & MMC_CAP_8_BIT_DATA &&
+	    imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) {
 		host->mmc->caps2 |= MMC_CAP2_HS400_ES;
 		host->mmc_host_ops.hs400_enhanced_strobe =
 					esdhc_hs400_enhanced_strobe;
@@ -1678,10 +1684,6 @@ static int sdhci_esdhc_imx_probe(struct
 			goto disable_ahb_clk;
 	}
 
-	err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
-	if (err)
-		goto disable_ahb_clk;
-
 	sdhci_esdhc_imx_hwinit(host);
 
 	err = sdhci_add_host(host);

[PATCH 5.15 040/132] counter: microchip-tcb-capture: Handle Signal1 read and Synapse

[Greg Kroah-Hartman]

From: William Breathitt Gray <william.gray@linaro.org>

commit d917a62af81b133f35f627e7936e193c842a7947 upstream.

The signal_read(), action_read(), and action_write() callbacks have been
assuming Signal0 is requested without checking. This results in requests
for Signal1 returning data for Signal0. This patch fixes these
oversights by properly checking for the Signal's id in the respective
callbacks and handling accordingly based on the particular Signal
requested. The trig_inverted member of the mchp_tc_data is removed as
superfluous.

Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Cc: stable@vger.kernel.org
Reviewed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Link: https://lore.kernel.org/r/20221018121014.7368-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/counter/microchip-tcb-capture.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

--- a/drivers/counter/microchip-tcb-capture.c
+++ b/drivers/counter/microchip-tcb-capture.c
@@ -29,7 +29,6 @@ struct mchp_tc_data {
 	int qdec_mode;
 	int num_channels;
 	int channel[2];
-	bool trig_inverted;
 };
 
 enum mchp_tc_count_function {
@@ -166,7 +165,7 @@ static int mchp_tc_count_signal_read(str
 
 	regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], SR), &sr);
 
-	if (priv->trig_inverted)
+	if (signal->id == 1)
 		sigstatus = (sr & ATMEL_TC_MTIOB);
 	else
 		sigstatus = (sr & ATMEL_TC_MTIOA);
@@ -184,6 +183,17 @@ static int mchp_tc_count_action_get(stru
 	struct mchp_tc_data *const priv = counter->priv;
 	u32 cmr;
 
+	if (priv->qdec_mode) {
+		*action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
+		return 0;
+	}
+
+	/* Only TIOA signal is evaluated in non-QDEC mode */
+	if (synapse->signal->id != 0) {
+		*action = COUNTER_SYNAPSE_ACTION_NONE;
+		return 0;
+	}
+
 	regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr);
 
 	switch (cmr & ATMEL_TC_ETRGEDG) {
@@ -212,8 +222,8 @@ static int mchp_tc_count_action_set(stru
 	struct mchp_tc_data *const priv = counter->priv;
 	u32 edge = ATMEL_TC_ETRGEDG_NONE;
 
-	/* QDEC mode is rising edge only */
-	if (priv->qdec_mode)
+	/* QDEC mode is rising edge only; only TIOA handled in non-QDEC mode */
+	if (priv->qdec_mode || synapse->signal->id != 0)
 		return -EINVAL;
 
 	switch (action) {

[PATCH 5.15 041/132] kernfs: fix use-after-free in __kernfs_remove

[Greg Kroah-Hartman]

From: Christian A. Ehrhardt <lk@c--e.de>

commit 4abc99652812a2ddf932f137515d5c5a04723538 upstream.

Syzkaller managed to trigger concurrent calls to
kernfs_remove_by_name_ns() for the same file resulting in
a KASAN detected use-after-free. The race occurs when the root
node is freed during kernfs_drain().

To prevent this acquire an additional reference for the root
of the tree that is removed before calling __kernfs_remove().

Found by syzkaller with the following reproducer (slab_nomerge is
required):

syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0)
r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0)
close(r0)
pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800)
mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}})

Sample report:

==================================================================
BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline]
BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline]
BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369
Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857

CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:317 [inline]
 print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433
 kasan_report+0xa3/0x130 mm/kasan/report.c:495
 kernfs_type include/linux/kernfs.h:335 [inline]
 kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline]
 __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369
 __kernfs_remove fs/kernfs/dir.c:1356 [inline]
 kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589
 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f725f983aed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed
RDX: 00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000
RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000
R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000
 </TASK>

Allocated by task 855:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:437 [inline]
 __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470
 kasan_slab_alloc include/linux/kasan.h:224 [inline]
 slab_post_alloc_hook mm/slab.h:727 [inline]
 slab_alloc_node mm/slub.c:3243 [inline]
 slab_alloc mm/slub.c:3251 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3258 [inline]
 kmem_cache_alloc+0xbf/0x200 mm/slub.c:3268
 kmem_cache_zalloc include/linux/slab.h:723 [inline]
 __kernfs_new_node+0xd4/0x680 fs/kernfs/dir.c:593
 kernfs_new_node fs/kernfs/dir.c:655 [inline]
 kernfs_create_dir_ns+0x9c/0x220 fs/kernfs/dir.c:1010
 sysfs_create_dir_ns+0x127/0x290 fs/sysfs/dir.c:59
 create_dir lib/kobject.c:63 [inline]
 kobject_add_internal+0x24a/0x8d0 lib/kobject.c:223
 kobject_add_varg lib/kobject.c:358 [inline]
 kobject_init_and_add+0x101/0x160 lib/kobject.c:441
 sysfs_slab_add+0x156/0x1e0 mm/slub.c:5954
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 857:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:367 [inline]
 ____kasan_slab_free mm/kasan/common.c:329 [inline]
 __kasan_slab_free+0x108/0x190 mm/kasan/common.c:375
 kasan_slab_free include/linux/kasan.h:200 [inline]
 slab_free_hook mm/slub.c:1754 [inline]
 slab_free_freelist_hook mm/slub.c:1780 [inline]
 slab_free mm/slub.c:3534 [inline]
 kmem_cache_free+0x9c/0x340 mm/slub.c:3551
 kernfs_put.part.0+0x2b2/0x520 fs/kernfs/dir.c:547
 kernfs_put+0x42/0x50 fs/kernfs/dir.c:521
 __kernfs_remove.part.0+0x72d/0x960 fs/kernfs/dir.c:1407
 __kernfs_remove fs/kernfs/dir.c:1356 [inline]
 kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589
 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943
 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335
 p9_client_create+0xd4d/0x1190 net/9p/client.c:993
 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408
 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126
 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610
 vfs_get_tree+0x85/0x2e0 fs/super.c:1530
 do_new_mount fs/namespace.c:3040 [inline]
 path_mount+0x675/0x1d00 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __x64_sys_mount+0x282/0x300 fs/namespace.c:3568
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The buggy address belongs to the object at ffff888008880780
 which belongs to the cache kernfs_node_cache of size 128
The buggy address is located 112 bytes inside of
 128-byte region [ffff888008880780, ffff888008880800)

The buggy address belongs to the physical page:
page:00000000732833f8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8880
flags: 0x100000000000200(slab|node=0|zone=1)
raw: 0100000000000200 0000000000000000 dead000000000122 ffff888001147280
raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888008880680: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
 ffff888008880700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888008880780: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff888008880800: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
 ffff888008880880: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================

Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable <stable@kernel.org> # -rc3
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20220913121723.691454-1-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/kernfs/dir.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/kernfs/dir.c
+++ b/fs/kernfs/dir.c
@@ -1547,8 +1547,11 @@ int kernfs_remove_by_name_ns(struct kern
 	down_write(&kernfs_rwsem);
 
 	kn = kernfs_find_ns(parent, name, ns);
-	if (kn)
+	if (kn) {
+		kernfs_get(kn);
 		__kernfs_remove(kn);
+		kernfs_put(kn);
+	}
 
 	up_write(&kernfs_rwsem);
 

[PATCH 5.15 042/132] pinctrl: Ingenic: JZ4755 bug fixes

[Greg Kroah-Hartman]

From: Siarhei Volkau <lis8215@gmail.com>

commit 17747577bbcb496e1b1c4096d64c2fc1e7bc0fef upstream.

Fixes UART1 function bits and MMC groups typo.

For pins 0x97,0x99 function 0 is designated to PWM3/PWM5
respectively, function is 1 designated to the UART1.

Diff from v1:
 - sent separately
 - added tag Fixes

Cc: stable@vger.kernel.org
Fixes: b582b5a434d3 ("pinctrl: Ingenic: Add pinctrl driver for JZ4755.")
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016153548.3024209-1-lis8215@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/pinctrl-ingenic.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -643,7 +643,7 @@ static u8 jz4755_lcd_24bit_funcs[] = { 1
 static const struct group_desc jz4755_groups[] = {
 	INGENIC_PIN_GROUP("uart0-data", jz4755_uart0_data, 0),
 	INGENIC_PIN_GROUP("uart0-hwflow", jz4755_uart0_hwflow, 0),
-	INGENIC_PIN_GROUP("uart1-data", jz4755_uart1_data, 0),
+	INGENIC_PIN_GROUP("uart1-data", jz4755_uart1_data, 1),
 	INGENIC_PIN_GROUP("uart2-data", jz4755_uart2_data, 1),
 	INGENIC_PIN_GROUP("ssi-dt-b", jz4755_ssi_dt_b, 0),
 	INGENIC_PIN_GROUP("ssi-dt-f", jz4755_ssi_dt_f, 0),
@@ -697,7 +697,7 @@ static const char *jz4755_ssi_groups[] =
 	"ssi-ce1-b", "ssi-ce1-f",
 };
 static const char *jz4755_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", };
-static const char *jz4755_mmc1_groups[] = { "mmc0-1bit", "mmc0-4bit", };
+static const char *jz4755_mmc1_groups[] = { "mmc1-1bit", "mmc1-4bit", };
 static const char *jz4755_i2c_groups[] = { "i2c-data", };
 static const char *jz4755_cim_groups[] = { "cim-data", };
 static const char *jz4755_lcd_groups[] = {

[PATCH 5.15 043/132] ARC: mm: fix leakage of memory allocated for PTE

[Greg Kroah-Hartman]

From: Pavel Kozlov <pavel.kozlov@synopsys.com>

commit 4fd9df10cb7a9289fbd22d669f9f98164d95a1ce upstream.

Since commit d9820ff ("ARC: mm: switch pgtable_t back to struct page *")
a memory leakage problem occurs. Memory allocated for page table entries
not released during process termination. This issue can be reproduced by
a small program that allocates a large amount of memory. After several
runs, you'll see that the amount of free memory has reduced and will
continue to reduce after each run. All ARC CPUs are effected by this
issue. The issue was introduced since the kernel stable release v5.15-rc1.

As described in commit d9820ff after switch pgtable_t back to struct
page *, a pointer to "struct page" and appropriate functions are used to
allocate and free a memory page for PTEs, but the pmd_pgtable macro hasn't
changed and returns the direct virtual address from the PMD (PGD) entry.
Than this address used as a parameter in the __pte_free() and as a result
this function couldn't release memory page allocated for PTEs.

Fix this issue by changing the pmd_pgtable macro and returning pointer to
struct page.

Fixes: d9820ff76f95 ("ARC: mm: switch pgtable_t back to struct page *")
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arc/include/asm/pgtable-levels.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arc/include/asm/pgtable-levels.h
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -163,7 +163,7 @@
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
 #define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
 
 /*
  * 4th level paging: pte

[PATCH 5.15 044/132] perf auxtrace: Fix address filter symbol name match for modules

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit cba04f3136b658583adb191556f99d087589c1cc upstream.

For modules, names from kallsyms__parse() contain the module name which
meant that module symbols did not match exactly by name.

Fix by matching the name string up to the separating tab character.

Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/auxtrace.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -2260,11 +2260,19 @@ struct sym_args {
 	bool		near;
 };
 
+static bool kern_sym_name_match(const char *kname, const char *name)
+{
+	size_t n = strlen(name);
+
+	return !strcmp(kname, name) ||
+	       (!strncmp(kname, name, n) && kname[n] == '\t');
+}
+
 static bool kern_sym_match(struct sym_args *args, const char *name, char type)
 {
 	/* A function with the same name, and global or the n'th found or any */
 	return kallsyms__is_function(type) &&
-	       !strcmp(name, args->name) &&
+	       kern_sym_name_match(name, args->name) &&
 	       ((args->global && isupper(type)) ||
 		(args->selected && ++(args->cnt) == args->idx) ||
 		(!args->global && !args->selected));

[PATCH 5.15 045/132] s390/futex: add missing EX_TABLE entry to __futex_atomic_op()

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

commit a262d3ad6a433e4080cecd0a8841104a5906355e upstream.

For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entry.

Cc: <stable@vger.kernel.org>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/futex.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/s390/include/asm/futex.h
+++ b/arch/s390/include/asm/futex.h
@@ -16,7 +16,8 @@
 		"3: jl    1b\n"						\
 		"   lhi   %0,0\n"					\
 		"4: sacf  768\n"					\
-		EX_TABLE(0b,4b) EX_TABLE(2b,4b) EX_TABLE(3b,4b)		\
+		EX_TABLE(0b,4b) EX_TABLE(1b,4b)				\
+		EX_TABLE(2b,4b) EX_TABLE(3b,4b)				\
 		: "=d" (ret), "=&d" (oldval), "=&d" (newval),		\
 		  "=m" (*uaddr)						\
 		: "0" (-EFAULT), "d" (oparg), "a" (uaddr),		\

[PATCH 5.15 046/132] s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser()

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

commit 6ec803025cf3173a57222e4411097166bd06fa98 upstream.

For some exception types the instruction address points behind the
instruction that caused the exception. Take that into account and add
the missing exception table entry.

Cc: <stable@vger.kernel.org>
Fixes: f058599e22d5 ("s390/pci: Fix s390_mmio_read/write with MIO")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/pci/pci_mmio.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/s390/pci/pci_mmio.c
+++ b/arch/s390/pci/pci_mmio.c
@@ -63,7 +63,7 @@ static inline int __pcistg_mio_inuser(
 	asm volatile (
 		"       sacf    256\n"
 		"0:     llgc    %[tmp],0(%[src])\n"
-		"       sllg    %[val],%[val],8\n"
+		"4:	sllg	%[val],%[val],8\n"
 		"       aghi    %[src],1\n"
 		"       ogr     %[val],%[tmp]\n"
 		"       brctg   %[cnt],0b\n"
@@ -71,7 +71,7 @@ static inline int __pcistg_mio_inuser(
 		"2:     ipm     %[cc]\n"
 		"       srl     %[cc],28\n"
 		"3:     sacf    768\n"
-		EX_TABLE(0b, 3b) EX_TABLE(1b, 3b) EX_TABLE(2b, 3b)
+		EX_TABLE(0b, 3b) EX_TABLE(4b, 3b) EX_TABLE(1b, 3b) EX_TABLE(2b, 3b)
 		:
 		[src] "+a" (src), [cnt] "+d" (cnt),
 		[val] "+d" (val), [tmp] "=d" (tmp),
@@ -214,10 +214,10 @@ static inline int __pcilg_mio_inuser(
 		"2:     ahi     %[shift],-8\n"
 		"       srlg    %[tmp],%[val],0(%[shift])\n"
 		"3:     stc     %[tmp],0(%[dst])\n"
-		"       aghi    %[dst],1\n"
+		"5:	aghi	%[dst],1\n"
 		"       brctg   %[cnt],2b\n"
 		"4:     sacf    768\n"
-		EX_TABLE(0b, 4b) EX_TABLE(1b, 4b) EX_TABLE(3b, 4b)
+		EX_TABLE(0b, 4b) EX_TABLE(1b, 4b) EX_TABLE(3b, 4b) EX_TABLE(5b, 4b)
 		:
 		[ioaddr_len] "+&d" (ioaddr_len.pair),
 		[cc] "+d" (cc), [val] "=d" (val),

[PATCH 5.15 047/132] Revert "scsi: lpfc: Resolve some cleanup issues following SLI path refactoring"

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

This reverts commit 17bf429b913b9e7f8d2353782e24ed3a491bb2d8.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its a fix specific to the Path Split patches,
which were partially included and now being pulled from 5.15.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_init.c |    2 +-
 drivers/scsi/lpfc/lpfc_sli.c  |   25 +++++++++++++------------
 2 files changed, 14 insertions(+), 13 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -11968,7 +11968,7 @@ lpfc_sli_enable_msi(struct lpfc_hba *phb
 	rc = pci_enable_msi(phba->pcidev);
 	if (!rc)
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0012 PCI enable MSI mode success.\n");
+				"0462 PCI enable MSI mode success.\n");
 	else {
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 				"0471 PCI enable MSI mode failed (%d)\n", rc);
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1939,7 +1939,7 @@ lpfc_issue_cmf_sync_wqe(struct lpfc_hba
 	sync_buf = __lpfc_sli_get_iocbq(phba);
 	if (!sync_buf) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT,
-				"6244 No available WQEs for CMF_SYNC_WQE\n");
+				"6213 No available WQEs for CMF_SYNC_WQE\n");
 		ret_val = ENOMEM;
 		goto out_unlock;
 	}
@@ -3739,7 +3739,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 						set_job_ulpword4(cmdiocbp,
 								 IOERR_ABORT_REQUESTED);
 						/*
-						 * For SLI4, irspiocb contains
+						 * For SLI4, irsiocb contains
 						 * NO_XRI in sli_xritag, it
 						 * shall not affect releasing
 						 * sgl (xri) process.
@@ -3757,7 +3757,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 					}
 				}
 			}
-			cmdiocbp->cmd_cmpl(phba, cmdiocbp, saveq);
+			(cmdiocbp->cmd_cmpl) (phba, cmdiocbp, saveq);
 		} else
 			lpfc_sli_release_iocbq(phba, cmdiocbp);
 	} else {
@@ -3997,7 +3997,8 @@ lpfc_sli_handle_fast_ring_event(struct l
 				cmdiocbq->cmd_flag &= ~LPFC_DRIVER_ABORTED;
 			if (cmdiocbq->cmd_cmpl) {
 				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				cmdiocbq->cmd_cmpl(phba, cmdiocbq, &rspiocbq);
+				(cmdiocbq->cmd_cmpl)(phba, cmdiocbq,
+						      &rspiocbq);
 				spin_lock_irqsave(&phba->hbalock, iflag);
 			}
 			break;
@@ -10937,7 +10938,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
  * @flag: Flag indicating if this command can be put into txq.
  *
  * __lpfc_sli_issue_fcp_io_s3 is wrapper function to invoke lockless func to
- * send  an iocb command to an HBA with SLI-3 interface spec.
+ * send  an iocb command to an HBA with SLI-4 interface spec.
  *
  * This function takes the hbalock before invoking the lockless version.
  * The function will return success after it successfully submit the wqe to
@@ -12990,7 +12991,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba
 		cmdiocbq->cmd_cmpl = cmdiocbq->wait_cmd_cmpl;
 		cmdiocbq->wait_cmd_cmpl = NULL;
 		if (cmdiocbq->cmd_cmpl)
-			cmdiocbq->cmd_cmpl(phba, cmdiocbq, NULL);
+			(cmdiocbq->cmd_cmpl)(phba, cmdiocbq, NULL);
 		else
 			lpfc_sli_release_iocbq(phba, cmdiocbq);
 		return;
@@ -13004,9 +13005,9 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba
 
 	/* Set the exchange busy flag for task management commands */
 	if ((cmdiocbq->cmd_flag & LPFC_IO_FCP) &&
-	    !(cmdiocbq->cmd_flag & LPFC_IO_LIBDFC)) {
+		!(cmdiocbq->cmd_flag & LPFC_IO_LIBDFC)) {
 		lpfc_cmd = container_of(cmdiocbq, struct lpfc_io_buf,
-					cur_iocbq);
+			cur_iocbq);
 		if (rspiocbq && (rspiocbq->cmd_flag & LPFC_EXCHANGE_BUSY))
 			lpfc_cmd->flags |= LPFC_SBUF_XBUSY;
 		else
@@ -14144,7 +14145,7 @@ void lpfc_sli4_els_xri_abort_event_proc(
  * @irspiocbq: Pointer to work-queue completion queue entry.
  *
  * This routine handles an ELS work-queue completion event and construct
- * a pseudo response ELS IOCBQ from the SLI4 ELS WCQE for the common
+ * a pseudo response ELS IODBQ from the SLI4 ELS WCQE for the common
  * discovery engine to handle.
  *
  * Return: Pointer to the receive IOCBQ, NULL otherwise.
@@ -14188,7 +14189,7 @@ lpfc_sli4_els_preprocess_rspiocbq(struct
 
 	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
 		spin_lock_irqsave(&phba->hbalock, iflags);
-		irspiocbq->cmd_flag |= LPFC_EXCHANGE_BUSY;
+		cmdiocbq->cmd_flag |= LPFC_EXCHANGE_BUSY;
 		spin_unlock_irqrestore(&phba->hbalock, iflags);
 	}
 
@@ -15047,7 +15048,7 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc
 		/* Pass the cmd_iocb and the wcqe to the upper layer */
 		memcpy(&cmdiocbq->wcqe_cmpl, wcqe,
 		       sizeof(struct lpfc_wcqe_complete));
-		cmdiocbq->cmd_cmpl(phba, cmdiocbq, cmdiocbq);
+		(cmdiocbq->cmd_cmpl)(phba, cmdiocbq, cmdiocbq);
 	} else {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 				"0375 FCP cmdiocb not callback function "
@@ -19211,7 +19212,7 @@ lpfc_sli4_send_seq_to_ulp(struct lpfc_vp
 
 	/* Free iocb created in lpfc_prep_seq */
 	list_for_each_entry_safe(curr_iocb, next_iocb,
-				 &iocbq->list, list) {
+		&iocbq->list, list) {
 		list_del_init(&curr_iocb->list);
 		lpfc_sli_release_iocbq(phba, curr_iocb);
 	}

[PATCH 5.15 048/132] Revert "scsi: lpfc: Fix element offset in __lpfc_sli_release_iocbq_s4()"

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

This reverts commit 6e99860de6f4e286c386f533c4d35e7e283803d4.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its a fix specific to the Path Split patches,
which were partially included and now being pulled from 5.15.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_sli.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1384,7 +1384,7 @@ static void
 __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 {
 	struct lpfc_sglq *sglq;
-	size_t start_clean = offsetof(struct lpfc_iocbq, wqe);
+	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
 	unsigned long iflag = 0;
 	struct lpfc_sli_ring *pring;
 

[PATCH 5.15 049/132] Revert "scsi: lpfc: Fix locking for lpfc_sli_iocbq_lookup()"

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

This reverts commit 9a570069cdbbc28c4b5b4632d5c9369371ec739c.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its a fix specific to the Path Split patches,
which were partially included and now being pulled from 5.15.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_sli.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3644,15 +3644,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 	unsigned long iflag;
 	u32 ulp_command, ulp_status, ulp_word4, ulp_context, iotag;
 
-	if (phba->sli_rev == LPFC_SLI_REV4)
-		spin_lock_irqsave(&pring->ring_lock, iflag);
-	else
-		spin_lock_irqsave(&phba->hbalock, iflag);
 	cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
-	if (phba->sli_rev == LPFC_SLI_REV4)
-		spin_unlock_irqrestore(&pring->ring_lock, iflag);
-	else
-		spin_unlock_irqrestore(&phba->hbalock, iflag);
 
 	ulp_command = get_job_cmnd(phba, saveq);
 	ulp_status = get_job_ulpstatus(phba, saveq);
@@ -3989,8 +3981,10 @@ lpfc_sli_handle_fast_ring_event(struct l
 				break;
 			}
 
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
 							 &rspiocbq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
 			if (unlikely(!cmdiocbq))
 				break;
 			if (cmdiocbq->cmd_flag & LPFC_DRIVER_ABORTED)

[PATCH 5.15 050/132] Revert "scsi: lpfc: SLI path split: Refactor SCSI paths"

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

This reverts commit b4543dbea84c8b64566dd0d626d63f8cbe977f61.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its one of the partial Path Split patches
that was included.

NOTE: fixed a git revert error which caused a new line to be inserted:
  line 5755 of lpfc_scsi.c in lpfc_queuecommand
      +	     atomic_inc(&ndlp->cmd_pending);
  Removed the line

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc.h      |    4 
 drivers/scsi/lpfc/lpfc_scsi.c |  376 +++++++++++++++++++++++-------------------
 drivers/scsi/lpfc/lpfc_sli.c  |    6 
 3 files changed, 211 insertions(+), 175 deletions(-)

--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -920,10 +920,6 @@ struct lpfc_hba {
 		(struct lpfc_vport *vport,
 		 struct lpfc_io_buf *lpfc_cmd,
 		 uint8_t tmo);
-	int (*lpfc_scsi_prep_task_mgmt_cmd)
-		(struct lpfc_vport *vport,
-		 struct lpfc_io_buf *lpfc_cmd,
-		 u64 lun, u8 task_mgmt_cmd);
 
 	/* IOCB interface function jump table entries */
 	int (*__lpfc_sli_issue_iocb)
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -2942,58 +2942,154 @@ out:
  * -1 - Internal error (bad profile, ...etc)
  */
 static int
-lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
-		  struct lpfc_iocbq *pIocbOut)
+lpfc_sli4_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
+		       struct lpfc_wcqe_complete *wcqe)
 {
 	struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
-	struct sli3_bg_fields *bgf;
 	int ret = 0;
-	struct lpfc_wcqe_complete *wcqe;
-	u32 status;
+	u32 status = bf_get(lpfc_wcqe_c_status, wcqe);
 	u32 bghm = 0;
 	u32 bgstat = 0;
 	u64 failing_sector = 0;
 
-	if (phba->sli_rev == LPFC_SLI_REV4) {
-		wcqe = &pIocbOut->wcqe_cmpl;
-		status = bf_get(lpfc_wcqe_c_status, wcqe);
+	if (status == CQE_STATUS_DI_ERROR) {
+		if (bf_get(lpfc_wcqe_c_bg_ge, wcqe)) /* Guard Check failed */
+			bgstat |= BGS_GUARD_ERR_MASK;
+		if (bf_get(lpfc_wcqe_c_bg_ae, wcqe)) /* AppTag Check failed */
+			bgstat |= BGS_APPTAG_ERR_MASK;
+		if (bf_get(lpfc_wcqe_c_bg_re, wcqe)) /* RefTag Check failed */
+			bgstat |= BGS_REFTAG_ERR_MASK;
+
+		/* Check to see if there was any good data before the error */
+		if (bf_get(lpfc_wcqe_c_bg_tdpv, wcqe)) {
+			bgstat |= BGS_HI_WATER_MARK_PRESENT_MASK;
+			bghm = wcqe->total_data_placed;
+		}
 
-		if (status == CQE_STATUS_DI_ERROR) {
-			/* Guard Check failed */
-			if (bf_get(lpfc_wcqe_c_bg_ge, wcqe))
-				bgstat |= BGS_GUARD_ERR_MASK;
-
-			/* AppTag Check failed */
-			if (bf_get(lpfc_wcqe_c_bg_ae, wcqe))
-				bgstat |= BGS_APPTAG_ERR_MASK;
-
-			/* RefTag Check failed */
-			if (bf_get(lpfc_wcqe_c_bg_re, wcqe))
-				bgstat |= BGS_REFTAG_ERR_MASK;
+		/*
+		 * Set ALL the error bits to indicate we don't know what
+		 * type of error it is.
+		 */
+		if (!bgstat)
+			bgstat |= (BGS_REFTAG_ERR_MASK | BGS_APPTAG_ERR_MASK |
+				BGS_GUARD_ERR_MASK);
+	}
 
-			/* Check to see if there was any good data before the
-			 * error
-			 */
-			if (bf_get(lpfc_wcqe_c_bg_tdpv, wcqe)) {
-				bgstat |= BGS_HI_WATER_MARK_PRESENT_MASK;
-				bghm = wcqe->total_data_placed;
-			}
+	if (lpfc_bgs_get_guard_err(bgstat)) {
+		ret = 1;
 
-			/*
-			 * Set ALL the error bits to indicate we don't know what
-			 * type of error it is.
-			 */
-			if (!bgstat)
-				bgstat |= (BGS_REFTAG_ERR_MASK |
-					   BGS_APPTAG_ERR_MASK |
-					   BGS_GUARD_ERR_MASK);
+		scsi_build_sense(cmd, 1, ILLEGAL_REQUEST, 0x10, 0x1);
+		set_host_byte(cmd, DID_ABORT);
+		phba->bg_guard_err_cnt++;
+		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
+				"9059 BLKGRD: Guard Tag error in cmd"
+				" 0x%x lba 0x%llx blk cnt 0x%x "
+				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
+				(unsigned long long)scsi_get_lba(cmd),
+				scsi_logical_block_count(cmd), bgstat, bghm);
+	}
+
+	if (lpfc_bgs_get_reftag_err(bgstat)) {
+		ret = 1;
+
+		scsi_build_sense(cmd, 1, ILLEGAL_REQUEST, 0x10, 0x3);
+		set_host_byte(cmd, DID_ABORT);
+
+		phba->bg_reftag_err_cnt++;
+		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
+				"9060 BLKGRD: Ref Tag error in cmd"
+				" 0x%x lba 0x%llx blk cnt 0x%x "
+				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
+				(unsigned long long)scsi_get_lba(cmd),
+				scsi_logical_block_count(cmd), bgstat, bghm);
+	}
+
+	if (lpfc_bgs_get_apptag_err(bgstat)) {
+		ret = 1;
+
+		scsi_build_sense(cmd, 1, ILLEGAL_REQUEST, 0x10, 0x2);
+		set_host_byte(cmd, DID_ABORT);
+
+		phba->bg_apptag_err_cnt++;
+		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
+				"9062 BLKGRD: App Tag error in cmd"
+				" 0x%x lba 0x%llx blk cnt 0x%x "
+				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
+				(unsigned long long)scsi_get_lba(cmd),
+				scsi_logical_block_count(cmd), bgstat, bghm);
+	}
+
+	if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
+		/*
+		 * setup sense data descriptor 0 per SPC-4 as an information
+		 * field, and put the failing LBA in it.
+		 * This code assumes there was also a guard/app/ref tag error
+		 * indication.
+		 */
+		cmd->sense_buffer[7] = 0xc;   /* Additional sense length */
+		cmd->sense_buffer[8] = 0;     /* Information descriptor type */
+		cmd->sense_buffer[9] = 0xa;   /* Additional descriptor length */
+		cmd->sense_buffer[10] = 0x80; /* Validity bit */
+
+		/* bghm is a "on the wire" FC frame based count */
+		switch (scsi_get_prot_op(cmd)) {
+		case SCSI_PROT_READ_INSERT:
+		case SCSI_PROT_WRITE_STRIP:
+			bghm /= cmd->device->sector_size;
+			break;
+		case SCSI_PROT_READ_STRIP:
+		case SCSI_PROT_WRITE_INSERT:
+		case SCSI_PROT_READ_PASS:
+		case SCSI_PROT_WRITE_PASS:
+			bghm /= (cmd->device->sector_size +
+				sizeof(struct scsi_dif_tuple));
+			break;
 		}
 
-	} else {
-		bgf = &pIocbOut->iocb.unsli3.sli3_bg;
-		bghm = bgf->bghm;
-		bgstat = bgf->bgstat;
+		failing_sector = scsi_get_lba(cmd);
+		failing_sector += bghm;
+
+		/* Descriptor Information */
+		put_unaligned_be64(failing_sector, &cmd->sense_buffer[12]);
+	}
+
+	if (!ret) {
+		/* No error was reported - problem in FW? */
+		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
+				"9068 BLKGRD: Unknown error in cmd"
+				" 0x%x lba 0x%llx blk cnt 0x%x "
+				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
+				(unsigned long long)scsi_get_lba(cmd),
+				scsi_logical_block_count(cmd), bgstat, bghm);
+
+		/* Calculate what type of error it was */
+		lpfc_calc_bg_err(phba, lpfc_cmd);
 	}
+	return ret;
+}
+
+/*
+ * This function checks for BlockGuard errors detected by
+ * the HBA.  In case of errors, the ASC/ASCQ fields in the
+ * sense buffer will be set accordingly, paired with
+ * ILLEGAL_REQUEST to signal to the kernel that the HBA
+ * detected corruption.
+ *
+ * Returns:
+ *  0 - No error found
+ *  1 - BlockGuard error found
+ * -1 - Internal error (bad profile, ...etc)
+ */
+static int
+lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd,
+		  struct lpfc_iocbq *pIocbOut)
+{
+	struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
+	struct sli3_bg_fields *bgf = &pIocbOut->iocb.unsli3.sli3_bg;
+	int ret = 0;
+	uint32_t bghm = bgf->bghm;
+	uint32_t bgstat = bgf->bgstat;
+	uint64_t failing_sector = 0;
 
 	if (lpfc_bgs_get_invalid_prof(bgstat)) {
 		cmd->result = DID_ERROR << 16;
@@ -3021,6 +3117,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba,
 
 	if (lpfc_bgs_get_guard_err(bgstat)) {
 		ret = 1;
+
 		scsi_build_sense(cmd, 1, ILLEGAL_REQUEST, 0x10, 0x1);
 		set_host_byte(cmd, DID_ABORT);
 		phba->bg_guard_err_cnt++;
@@ -3034,8 +3131,10 @@ lpfc_parse_bg_err(struct lpfc_hba *phba,
 
 	if (lpfc_bgs_get_reftag_err(bgstat)) {
 		ret = 1;
+
 		scsi_build_sense(cmd, 1, ILLEGAL_REQUEST, 0x10, 0x3);
 		set_host_byte(cmd, DID_ABORT);
+
 		phba->bg_reftag_err_cnt++;
 		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
 				"9056 BLKGRD: Ref Tag error in cmd "
@@ -3047,8 +3146,10 @@ lpfc_parse_bg_err(struct lpfc_hba *phba,
 
 	if (lpfc_bgs_get_apptag_err(bgstat)) {
 		ret = 1;
+
 		scsi_build_sense(cmd, 1, ILLEGAL_REQUEST, 0x10, 0x2);
 		set_host_byte(cmd, DID_ABORT);
+
 		phba->bg_apptag_err_cnt++;
 		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
 				"9061 BLKGRD: App Tag error in cmd "
@@ -4093,6 +4194,7 @@ lpfc_fcp_io_cmd_wqe_cmpl(struct lpfc_hba
 	struct Scsi_Host *shost;
 	u32 logit = LOG_FCP;
 	u32 status, idx;
+	unsigned long iflags = 0;
 	u32 lat;
 	u8 wait_xb_clr = 0;
 
@@ -4107,16 +4209,30 @@ lpfc_fcp_io_cmd_wqe_cmpl(struct lpfc_hba
 	rdata = lpfc_cmd->rdata;
 	ndlp = rdata->pnode;
 
+	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
+		/* TOREMOVE - currently this flag is checked during
+		 * the release of lpfc_iocbq. Remove once we move
+		 * to lpfc_wqe_job construct.
+		 *
+		 * This needs to be done outside buf_lock
+		 */
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		lpfc_cmd->cur_iocbq.cmd_flag |= LPFC_EXCHANGE_BUSY;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+	}
+
+	/* Guard against abort handler being called at same time */
+	spin_lock(&lpfc_cmd->buf_lock);
+
 	/* Sanity check on return of outstanding command */
 	cmd = lpfc_cmd->pCmd;
 	if (!cmd) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
 				 "9042 I/O completion: Not an active IO\n");
+		spin_unlock(&lpfc_cmd->buf_lock);
 		lpfc_release_scsi_buf(phba, lpfc_cmd);
 		return;
 	}
-	/* Guard against abort handler being called at same time */
-	spin_lock(&lpfc_cmd->buf_lock);
 	idx = lpfc_cmd->cur_iocbq.hba_wqidx;
 	if (phba->sli4_hba.hdwq)
 		phba->sli4_hba.hdwq[idx].scsi_cstat.io_cmpls++;
@@ -4290,14 +4406,12 @@ lpfc_fcp_io_cmd_wqe_cmpl(struct lpfc_hba
 				 * This is a response for a BG enabled
 				 * cmd. Parse BG error
 				 */
-				lpfc_parse_bg_err(phba, lpfc_cmd, pwqeOut);
+				lpfc_sli4_parse_bg_err(phba, lpfc_cmd,
+						       wcqe);
 				break;
-			} else {
-				lpfc_printf_vlog(vport, KERN_WARNING,
-						 LOG_BG,
-						 "9040 non-zero BGSTAT "
-						 "on unprotected cmd\n");
 			}
+			lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+				 "9040 non-zero BGSTAT on unprotected cmd\n");
 		}
 		lpfc_printf_vlog(vport, KERN_WARNING, logit,
 				 "9036 Local Reject FCP cmd x%x failed"
@@ -4902,7 +5016,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *v
 }
 
 /**
- * lpfc_scsi_prep_task_mgmt_cmd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
+ * lpfc_scsi_prep_task_mgmt_cmd - Convert SLI3 scsi TM cmd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_io_buf data structure.
  * @lun: Logical unit number.
@@ -4916,9 +5030,10 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *v
  *   1 - Success
  **/
 static int
-lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
-				struct lpfc_io_buf *lpfc_cmd,
-				u64 lun, u8 task_mgmt_cmd)
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+			     struct lpfc_io_buf *lpfc_cmd,
+			     uint64_t lun,
+			     uint8_t task_mgmt_cmd)
 {
 	struct lpfc_iocbq *piocbq;
 	IOCB_t *piocb;
@@ -4939,10 +5054,15 @@ lpfc_scsi_prep_task_mgmt_cmd_s3(struct l
 	memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
 	int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
 	fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
-	if (!(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED))
+	if (vport->phba->sli_rev == 3 &&
+	    !(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED))
 		lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
 	piocb->ulpCommand = CMD_FCP_ICMND64_CR;
 	piocb->ulpContext = ndlp->nlp_rpi;
+	if (vport->phba->sli_rev == LPFC_SLI_REV4) {
+		piocb->ulpContext =
+		  vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
+	}
 	piocb->ulpFCP2Rcvy = (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) ? 1 : 0;
 	piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);
 	piocb->ulpPU = 0;
@@ -4958,79 +5078,8 @@ lpfc_scsi_prep_task_mgmt_cmd_s3(struct l
 	} else
 		piocb->ulpTimeout = lpfc_cmd->timeout;
 
-	return 1;
-}
-
-/**
- * lpfc_scsi_prep_task_mgmt_cmd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: Pointer to lpfc_io_buf data structure.
- * @lun: Logical unit number.
- * @task_mgmt_cmd: SCSI task management command.
- *
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd
- * for device with SLI-4 interface spec.
- *
- * Return codes:
- *   0 - Error
- *   1 - Success
- **/
-static int
-lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
-				struct lpfc_io_buf *lpfc_cmd,
-				u64 lun, u8 task_mgmt_cmd)
-{
-	struct lpfc_iocbq *pwqeq = &lpfc_cmd->cur_iocbq;
-	union lpfc_wqe128 *wqe = &pwqeq->wqe;
-	struct fcp_cmnd *fcp_cmnd;
-	struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
-	struct lpfc_nodelist *ndlp = rdata->pnode;
-
-	if (!ndlp || ndlp->nlp_state != NLP_STE_MAPPED_NODE)
-		return 0;
-
-	pwqeq->vport = vport;
-	/* Initialize 64 bytes only */
-	memset(wqe, 0, sizeof(union lpfc_wqe128));
-
-	/* From the icmnd template, initialize words 4 - 11 */
-	memcpy(&wqe->words[4], &lpfc_icmnd_cmd_template.words[4],
-	       sizeof(uint32_t) * 8);
-
-	fcp_cmnd = lpfc_cmd->fcp_cmnd;
-	/* Clear out any old data in the FCP command area */
-	memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
-	int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
-	fcp_cmnd->fcpCntl3 = 0;
-	fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
-
-	bf_set(payload_offset_len, &wqe->fcp_icmd,
-	       sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
-	bf_set(cmd_buff_len, &wqe->fcp_icmd, 0);
-	bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com,  /* ulpContext */
-	       vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
-	bf_set(wqe_erp, &wqe->fcp_icmd.wqe_com,
-	       ((ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) ? 1 : 0));
-	bf_set(wqe_class, &wqe->fcp_icmd.wqe_com,
-	       (ndlp->nlp_fcp_info & 0x0f));
-
-	/* ulpTimeout is only one byte */
-	if (lpfc_cmd->timeout > 0xff) {
-		/*
-		 * Do not timeout the command at the firmware level.
-		 * The driver will provide the timeout mechanism.
-		 */
-		bf_set(wqe_tmo, &wqe->fcp_icmd.wqe_com, 0);
-	} else {
-		bf_set(wqe_tmo, &wqe->fcp_icmd.wqe_com, lpfc_cmd->timeout);
-	}
-
-	lpfc_prep_embed_io(vport->phba, lpfc_cmd);
-	bf_set(wqe_xri_tag, &wqe->generic.wqe_com, pwqeq->sli4_xritag);
-	wqe->generic.wqe_com.abort_tag = pwqeq->iotag;
-	bf_set(wqe_reqtag, &wqe->generic.wqe_com, pwqeq->iotag);
-
-	lpfc_sli4_set_rsp_sgl_last(vport->phba, lpfc_cmd);
+	if (vport->phba->sli_rev == LPFC_SLI_REV4)
+		lpfc_sli4_set_rsp_sgl_last(vport->phba, lpfc_cmd);
 
 	return 1;
 }
@@ -5057,8 +5106,6 @@ lpfc_scsi_api_table_setup(struct lpfc_hb
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
 		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
 		phba->lpfc_scsi_prep_cmnd_buf = lpfc_scsi_prep_cmnd_buf_s3;
-		phba->lpfc_scsi_prep_task_mgmt_cmd =
-					lpfc_scsi_prep_task_mgmt_cmd_s3;
 		break;
 	case LPFC_PCI_DEV_OC:
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
@@ -5066,8 +5113,6 @@ lpfc_scsi_api_table_setup(struct lpfc_hb
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
 		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4;
 		phba->lpfc_scsi_prep_cmnd_buf = lpfc_scsi_prep_cmnd_buf_s4;
-		phba->lpfc_scsi_prep_task_mgmt_cmd =
-					lpfc_scsi_prep_task_mgmt_cmd_s4;
 		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
@@ -5546,7 +5591,6 @@ lpfc_queuecommand(struct Scsi_Host *shos
 {
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_iocbq *cur_iocbq = NULL;
 	struct lpfc_rport_data *rdata;
 	struct lpfc_nodelist *ndlp;
 	struct lpfc_io_buf *lpfc_cmd;
@@ -5640,7 +5684,6 @@ lpfc_queuecommand(struct Scsi_Host *shos
 	}
 	lpfc_cmd->rx_cmd_start = start;
 
-	cur_iocbq = &lpfc_cmd->cur_iocbq;
 	/*
 	 * Store the midlayer's command structure for the completion phase
 	 * and complete the command initialization.
@@ -5648,7 +5691,7 @@ lpfc_queuecommand(struct Scsi_Host *shos
 	lpfc_cmd->pCmd  = cmnd;
 	lpfc_cmd->rdata = rdata;
 	lpfc_cmd->ndlp = ndlp;
-	cur_iocbq->cmd_cmpl = NULL;
+	lpfc_cmd->cur_iocbq.cmd_cmpl = NULL;
 	cmnd->host_scribble = (unsigned char *)lpfc_cmd;
 
 	err = lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
@@ -5690,6 +5733,7 @@ lpfc_queuecommand(struct Scsi_Host *shos
 		goto out_host_busy_free_buf;
 	}
 
+
 	/* check the necessary and sufficient condition to support VMID */
 	if (lpfc_is_vmid_enabled(phba) &&
 	    (ndlp->vmid_support ||
@@ -5702,9 +5746,9 @@ lpfc_queuecommand(struct Scsi_Host *shos
 		if (uuid) {
 			err = lpfc_vmid_get_appid(vport, uuid, cmnd,
 				(union lpfc_vmid_io_tag *)
-					&cur_iocbq->vmid_tag);
+					&lpfc_cmd->cur_iocbq.vmid_tag);
 			if (!err)
-				cur_iocbq->cmd_flag |= LPFC_IO_VMID;
+				lpfc_cmd->cur_iocbq.cmd_flag |= LPFC_IO_VMID;
 		}
 	}
 
@@ -5713,7 +5757,8 @@ lpfc_queuecommand(struct Scsi_Host *shos
 		this_cpu_inc(phba->sli4_hba.c_stat->xmt_io);
 #endif
 	/* Issue I/O to adapter */
-	err = lpfc_sli_issue_fcp_io(phba, LPFC_FCP_RING, cur_iocbq,
+	err = lpfc_sli_issue_fcp_io(phba, LPFC_FCP_RING,
+				    &lpfc_cmd->cur_iocbq,
 				    SLI_IOCB_RET_IOCB);
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	if (start) {
@@ -5726,25 +5771,25 @@ lpfc_queuecommand(struct Scsi_Host *shos
 #endif
 	if (err) {
 		lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
-				 "3376 FCP could not issue iocb err %x "
-				 "FCP cmd x%x <%d/%llu> "
-				 "sid: x%x did: x%x oxid: x%x "
-				 "Data: x%x x%x x%x x%x\n",
-				 err, cmnd->cmnd[0],
-				 cmnd->device ? cmnd->device->id : 0xffff,
-				 cmnd->device ? cmnd->device->lun : (u64)-1,
-				 vport->fc_myDID, ndlp->nlp_DID,
-				 phba->sli_rev == LPFC_SLI_REV4 ?
-				 cur_iocbq->sli4_xritag : 0xffff,
-				 phba->sli_rev == LPFC_SLI_REV4 ?
-				 phba->sli4_hba.rpi_ids[ndlp->nlp_rpi] :
-				 cur_iocbq->iocb.ulpContext,
-				 cur_iocbq->iotag,
-				 phba->sli_rev == LPFC_SLI_REV4 ?
-				 bf_get(wqe_tmo,
-					&cur_iocbq->wqe.generic.wqe_com) :
-				 cur_iocbq->iocb.ulpTimeout,
-				 (uint32_t)(scsi_cmd_to_rq(cmnd)->timeout / 1000));
+				   "3376 FCP could not issue IOCB err %x "
+				   "FCP cmd x%x <%d/%llu> "
+				   "sid: x%x did: x%x oxid: x%x "
+				   "Data: x%x x%x x%x x%x\n",
+				   err, cmnd->cmnd[0],
+				   cmnd->device ? cmnd->device->id : 0xffff,
+				   cmnd->device ? cmnd->device->lun : (u64)-1,
+				   vport->fc_myDID, ndlp->nlp_DID,
+				   phba->sli_rev == LPFC_SLI_REV4 ?
+				   lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff,
+				   phba->sli_rev == LPFC_SLI_REV4 ?
+				   phba->sli4_hba.rpi_ids[ndlp->nlp_rpi] :
+				   lpfc_cmd->cur_iocbq.iocb.ulpContext,
+				   lpfc_cmd->cur_iocbq.iotag,
+				   phba->sli_rev == LPFC_SLI_REV4 ?
+				   bf_get(wqe_tmo,
+				   &lpfc_cmd->cur_iocbq.wqe.generic.wqe_com) :
+				   lpfc_cmd->cur_iocbq.iocb.ulpTimeout,
+				   (uint32_t)(scsi_cmd_to_rq(cmnd)->timeout / 1000));
 
 		goto out_host_busy_free_buf;
 	}
@@ -6121,7 +6166,7 @@ lpfc_send_taskmgmt(struct lpfc_vport *vp
 		return FAILED;
 	pnode = rdata->pnode;
 
-	lpfc_cmd = lpfc_get_scsi_buf(phba, rdata->pnode, NULL);
+	lpfc_cmd = lpfc_get_scsi_buf(phba, pnode, NULL);
 	if (lpfc_cmd == NULL)
 		return FAILED;
 	lpfc_cmd->timeout = phba->cfg_task_mgmt_tmo;
@@ -6129,8 +6174,8 @@ lpfc_send_taskmgmt(struct lpfc_vport *vp
 	lpfc_cmd->pCmd = cmnd;
 	lpfc_cmd->ndlp = pnode;
 
-	status = phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
-						    task_mgmt_cmd);
+	status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
+					   task_mgmt_cmd);
 	if (!status) {
 		lpfc_release_scsi_buf(phba, lpfc_cmd);
 		return FAILED;
@@ -6143,7 +6188,6 @@ lpfc_send_taskmgmt(struct lpfc_vport *vp
 		return FAILED;
 	}
 	iocbq->cmd_cmpl = lpfc_tskmgmt_def_cmpl;
-	iocbq->vport = vport;
 
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
 			 "0702 Issue %s to TGT %d LUN %llu "
@@ -6155,28 +6199,26 @@ lpfc_send_taskmgmt(struct lpfc_vport *vp
 	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
 					  iocbq, iocbqrsp, lpfc_cmd->timeout);
 	if ((status != IOCB_SUCCESS) ||
-	    (get_job_ulpstatus(phba, iocbqrsp) != IOSTAT_SUCCESS)) {
+	    (iocbqrsp->iocb.ulpStatus != IOSTAT_SUCCESS)) {
 		if (status != IOCB_SUCCESS ||
-		    get_job_ulpstatus(phba, iocbqrsp) != IOSTAT_FCP_RSP_ERROR)
+		    iocbqrsp->iocb.ulpStatus != IOSTAT_FCP_RSP_ERROR)
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
 					 "0727 TMF %s to TGT %d LUN %llu "
 					 "failed (%d, %d) cmd_flag x%x\n",
 					 lpfc_taskmgmt_name(task_mgmt_cmd),
 					 tgt_id, lun_id,
-					 get_job_ulpstatus(phba, iocbqrsp),
-					 get_job_word4(phba, iocbqrsp),
+					 iocbqrsp->iocb.ulpStatus,
+					 iocbqrsp->iocb.un.ulpWord[4],
 					 iocbq->cmd_flag);
 		/* if ulpStatus != IOCB_SUCCESS, then status == IOCB_SUCCESS */
 		if (status == IOCB_SUCCESS) {
-			if (get_job_ulpstatus(phba, iocbqrsp) ==
-			    IOSTAT_FCP_RSP_ERROR)
+			if (iocbqrsp->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
 				/* Something in the FCP_RSP was invalid.
 				 * Check conditions */
 				ret = lpfc_check_fcp_rsp(vport, lpfc_cmd);
 			else
 				ret = FAILED;
-		} else if ((status == IOCB_TIMEDOUT) ||
-			   (status == IOCB_ABORTED)) {
+		} else if (status == IOCB_TIMEDOUT) {
 			ret = TIMEOUT_ERROR;
 		} else {
 			ret = FAILED;
@@ -6186,7 +6228,7 @@ lpfc_send_taskmgmt(struct lpfc_vport *vp
 
 	lpfc_sli_release_iocbq(phba, iocbqrsp);
 
-	if (status != IOCB_TIMEDOUT)
+	if (ret != TIMEOUT_ERROR)
 		lpfc_release_scsi_buf(phba, lpfc_cmd);
 
 	return ret;
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12970,7 +12970,6 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba
 	wait_queue_head_t *pdone_q;
 	unsigned long iflags;
 	struct lpfc_io_buf *lpfc_cmd;
-	size_t offset = offsetof(struct lpfc_iocbq, wqe);
 
 	spin_lock_irqsave(&phba->hbalock, iflags);
 	if (cmdiocbq->cmd_flag & LPFC_IO_WAKE_TMO) {
@@ -12991,11 +12990,10 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba
 		return;
 	}
 
-	/* Copy the contents of the local rspiocb into the caller's buffer. */
 	cmdiocbq->cmd_flag |= LPFC_IO_WAKE;
 	if (cmdiocbq->context2 && rspiocbq)
-		memcpy((char *)cmdiocbq->context2 + offset,
-		       (char *)rspiocbq + offset, sizeof(*rspiocbq) - offset);
+		memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
+		       &rspiocbq->iocb, sizeof(IOCB_t));
 
 	/* Set the exchange busy flag for task management commands */
 	if ((cmdiocbq->cmd_flag & LPFC_IO_FCP) &&

[PATCH 5.15 051/132] Revert "scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4"

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

This reverts commit c56cc7fefc3159049f94fb1318e48aa60cabf703.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its one of the partial Path Split patches
that was included.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc.h      |   36 --
 drivers/scsi/lpfc/lpfc_crtn.h |    1 
 drivers/scsi/lpfc/lpfc_hw4.h  |    7 
 drivers/scsi/lpfc/lpfc_sli.c  |  513 ++++++++++++++++++++++++------------------
 drivers/scsi/lpfc/lpfc_sli.h  |    2 
 5 files changed, 302 insertions(+), 257 deletions(-)

--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1803,39 +1803,3 @@ static inline int lpfc_is_vmid_enabled(s
 {
 	return phba->cfg_vmid_app_header || phba->cfg_vmid_priority_tagging;
 }
-
-static inline
-u8 get_job_ulpstatus(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
-{
-	if (phba->sli_rev == LPFC_SLI_REV4)
-		return bf_get(lpfc_wcqe_c_status, &iocbq->wcqe_cmpl);
-	else
-		return iocbq->iocb.ulpStatus;
-}
-
-static inline
-u32 get_job_word4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
-{
-	if (phba->sli_rev == LPFC_SLI_REV4)
-		return iocbq->wcqe_cmpl.parameter;
-	else
-		return iocbq->iocb.un.ulpWord[4];
-}
-
-static inline
-u8 get_job_cmnd(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
-{
-	if (phba->sli_rev == LPFC_SLI_REV4)
-		return bf_get(wqe_cmnd, &iocbq->wqe.generic.wqe_com);
-	else
-		return iocbq->iocb.ulpCommand;
-}
-
-static inline
-u16 get_job_ulpcontext(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
-{
-	if (phba->sli_rev == LPFC_SLI_REV4)
-		return bf_get(wqe_ctxt_tag, &iocbq->wqe.generic.wqe_com);
-	else
-		return iocbq->iocb.ulpContext;
-}
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -129,7 +129,6 @@ void lpfc_disc_list_loopmap(struct lpfc_
 void lpfc_disc_start(struct lpfc_vport *);
 void lpfc_cleanup_discovery_resources(struct lpfc_vport *);
 void lpfc_cleanup(struct lpfc_vport *);
-void lpfc_prep_embed_io(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_ncmd);
 void lpfc_disc_timeout(struct timer_list *);
 
 int lpfc_unregister_fcf_prep(struct lpfc_hba *);
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -60,13 +60,6 @@
 	((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
 		 ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
 
-#define get_wqe_reqtag(x)	(((x)->wqe.words[9] >>  0) & 0xFFFF)
-
-#define get_job_ulpword(x, y)	((x)->iocb.un.ulpWord[y])
-
-#define set_job_ulpstatus(x, y)	bf_set(lpfc_wcqe_c_status, &(x)->wcqe_cmpl, y)
-#define set_job_ulpword4(x, y)	((&(x)->wcqe_cmpl)->parameter = y)
-
 struct dma_address {
 	uint32_t addr_lo;
 	uint32_t addr_hi;
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -70,9 +70,8 @@ static int lpfc_sli_issue_mbox_s4(struct
 				  uint32_t);
 static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
 			      uint8_t *, uint32_t *);
-static struct lpfc_iocbq *
-lpfc_sli4_els_preprocess_rspiocbq(struct lpfc_hba *phba,
-				  struct lpfc_iocbq *rspiocbq);
+static struct lpfc_iocbq *lpfc_sli4_els_wcqe_to_rspiocbq(struct lpfc_hba *,
+							 struct lpfc_iocbq *);
 static void lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *,
 				      struct hbq_dmabuf *);
 static void lpfc_sli4_handle_mds_loopback(struct lpfc_vport *vport,
@@ -90,9 +89,6 @@ static struct lpfc_cqe *lpfc_sli4_cq_get
 static void __lpfc_sli4_consume_cqe(struct lpfc_hba *phba,
 				    struct lpfc_queue *cq,
 				    struct lpfc_cqe *cqe);
-static uint16_t lpfc_wqe_bpl2sgl(struct lpfc_hba *phba,
-				 struct lpfc_iocbq *pwqeq,
-				 struct lpfc_sglq *sglq);
 
 union lpfc_wqe128 lpfc_iread_cmd_template;
 union lpfc_wqe128 lpfc_iwrite_cmd_template;
@@ -3556,12 +3552,17 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *p
 		      struct lpfc_iocbq *prspiocb)
 {
 	struct lpfc_iocbq *cmd_iocb = NULL;
-	u16 iotag;
+	uint16_t iotag;
+	spinlock_t *temp_lock = NULL;
+	unsigned long iflag = 0;
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
-		iotag = get_wqe_reqtag(prspiocb);
+		temp_lock = &pring->ring_lock;
 	else
-		iotag = prspiocb->iocb.ulpIoTag;
+		temp_lock = &phba->hbalock;
+
+	spin_lock_irqsave(temp_lock, iflag);
+	iotag = prspiocb->iocb.ulpIoTag;
 
 	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
 		cmd_iocb = phba->sli.iocbq_lookup[iotag];
@@ -3570,14 +3571,17 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *p
 			list_del_init(&cmd_iocb->list);
 			cmd_iocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
 			pring->txcmplq_cnt--;
+			spin_unlock_irqrestore(temp_lock, iflag);
 			return cmd_iocb;
 		}
 	}
 
+	spin_unlock_irqrestore(temp_lock, iflag);
 	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
 			"0317 iotag x%x is out of "
-			"range: max iotag x%x\n",
-			iotag, phba->sli.last_iotag);
+			"range: max iotag x%x wd0 x%x\n",
+			iotag, phba->sli.last_iotag,
+			*(((uint32_t *) &prspiocb->iocb) + 7));
 	return NULL;
 }
 
@@ -3598,7 +3602,15 @@ lpfc_sli_iocbq_lookup_by_tag(struct lpfc
 			     struct lpfc_sli_ring *pring, uint16_t iotag)
 {
 	struct lpfc_iocbq *cmd_iocb = NULL;
+	spinlock_t *temp_lock = NULL;
+	unsigned long iflag = 0;
 
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		temp_lock = &pring->ring_lock;
+	else
+		temp_lock = &phba->hbalock;
+
+	spin_lock_irqsave(temp_lock, iflag);
 	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
 		cmd_iocb = phba->sli.iocbq_lookup[iotag];
 		if (cmd_iocb->cmd_flag & LPFC_IO_ON_TXCMPLQ) {
@@ -3606,10 +3618,12 @@ lpfc_sli_iocbq_lookup_by_tag(struct lpfc
 			list_del_init(&cmd_iocb->list);
 			cmd_iocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
 			pring->txcmplq_cnt--;
+			spin_unlock_irqrestore(temp_lock, iflag);
 			return cmd_iocb;
 		}
 	}
 
+	spin_unlock_irqrestore(temp_lock, iflag);
 	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
 			"0372 iotag x%x lookup error: max iotag (x%x) "
 			"cmd_flag x%x\n",
@@ -3642,29 +3656,18 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 	struct lpfc_iocbq *cmdiocbp;
 	int rc = 1;
 	unsigned long iflag;
-	u32 ulp_command, ulp_status, ulp_word4, ulp_context, iotag;
 
 	cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
-
-	ulp_command = get_job_cmnd(phba, saveq);
-	ulp_status = get_job_ulpstatus(phba, saveq);
-	ulp_word4 = get_job_word4(phba, saveq);
-	ulp_context = get_job_ulpcontext(phba, saveq);
-	if (phba->sli_rev == LPFC_SLI_REV4)
-		iotag = get_wqe_reqtag(saveq);
-	else
-		iotag = saveq->iocb.ulpIoTag;
-
 	if (cmdiocbp) {
-		ulp_command = get_job_cmnd(phba, cmdiocbp);
 		if (cmdiocbp->cmd_cmpl) {
 			/*
 			 * If an ELS command failed send an event to mgmt
 			 * application.
 			 */
-			if (ulp_status &&
+			if (saveq->iocb.ulpStatus &&
 			     (pring->ringno == LPFC_ELS_RING) &&
-			     (ulp_command == CMD_ELS_REQUEST64_CR))
+			     (cmdiocbp->iocb.ulpCommand ==
+				CMD_ELS_REQUEST64_CR))
 				lpfc_send_els_failure_event(phba,
 					cmdiocbp, saveq);
 
@@ -3726,20 +3729,20 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 							~LPFC_DRIVER_ABORTED;
 						spin_unlock_irqrestore(
 							&phba->hbalock, iflag);
-						set_job_ulpstatus(cmdiocbp,
-								  IOSTAT_LOCAL_REJECT);
-						set_job_ulpword4(cmdiocbp,
-								 IOERR_ABORT_REQUESTED);
+						cmdiocbp->iocb.ulpStatus =
+							IOSTAT_LOCAL_REJECT;
+						cmdiocbp->iocb.un.ulpWord[4] =
+							IOERR_ABORT_REQUESTED;
 						/*
 						 * For SLI4, irsiocb contains
 						 * NO_XRI in sli_xritag, it
 						 * shall not affect releasing
 						 * sgl (xri) process.
 						 */
-						set_job_ulpstatus(saveq,
-								  IOSTAT_LOCAL_REJECT);
-						set_job_ulpword4(saveq,
-								 IOERR_SLI_ABORTED);
+						saveq->iocb.ulpStatus =
+							IOSTAT_LOCAL_REJECT;
+						saveq->iocb.un.ulpWord[4] =
+							IOERR_SLI_ABORTED;
 						spin_lock_irqsave(
 							&phba->hbalock, iflag);
 						saveq->cmd_flag |=
@@ -3767,8 +3770,12 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 					 "0322 Ring %d handler: "
 					 "unexpected completion IoTag x%x "
 					 "Data: x%x x%x x%x x%x\n",
-					 pring->ringno, iotag, ulp_status,
-					 ulp_word4, ulp_command, ulp_context);
+					 pring->ringno,
+					 saveq->iocb.ulpIoTag,
+					 saveq->iocb.ulpStatus,
+					 saveq->iocb.un.ulpWord[4],
+					 saveq->iocb.ulpCommand,
+					 saveq->iocb.ulpContext);
 		}
 	}
 
@@ -4083,159 +4090,155 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_h
 			struct lpfc_iocbq *rspiocbp)
 {
 	struct lpfc_iocbq *saveq;
-	struct lpfc_iocbq *cmdiocb;
+	struct lpfc_iocbq *cmdiocbp;
 	struct lpfc_iocbq *next_iocb;
-	IOCB_t *irsp;
+	IOCB_t *irsp = NULL;
 	uint32_t free_saveq;
-	u8 cmd_type;
+	uint8_t iocb_cmd_type;
 	lpfc_iocb_type type;
 	unsigned long iflag;
-	u32 ulp_status = get_job_ulpstatus(phba, rspiocbp);
-	u32 ulp_word4 = get_job_word4(phba, rspiocbp);
-	u32 ulp_command = get_job_cmnd(phba, rspiocbp);
 	int rc;
 
 	spin_lock_irqsave(&phba->hbalock, iflag);
 	/* First add the response iocb to the countinueq list */
-	list_add_tail(&rspiocbp->list, &pring->iocb_continueq);
+	list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
 	pring->iocb_continueq_cnt++;
 
-	/*
-	 * By default, the driver expects to free all resources
-	 * associated with this iocb completion.
-	 */
-	free_saveq = 1;
-	saveq = list_get_first(&pring->iocb_continueq,
-			       struct lpfc_iocbq, list);
-	list_del_init(&pring->iocb_continueq);
-	pring->iocb_continueq_cnt = 0;
+	/* Now, determine whether the list is completed for processing */
+	irsp = &rspiocbp->iocb;
+	if (irsp->ulpLe) {
+		/*
+		 * By default, the driver expects to free all resources
+		 * associated with this iocb completion.
+		 */
+		free_saveq = 1;
+		saveq = list_get_first(&pring->iocb_continueq,
+				       struct lpfc_iocbq, list);
+		irsp = &(saveq->iocb);
+		list_del_init(&pring->iocb_continueq);
+		pring->iocb_continueq_cnt = 0;
 
-	pring->stats.iocb_rsp++;
+		pring->stats.iocb_rsp++;
 
-	/*
-	 * If resource errors reported from HBA, reduce
-	 * queuedepths of the SCSI device.
-	 */
-	if (ulp_status == IOSTAT_LOCAL_REJECT &&
-	    ((ulp_word4 & IOERR_PARAM_MASK) ==
-	     IOERR_NO_RESOURCES)) {
-		spin_unlock_irqrestore(&phba->hbalock, iflag);
-		phba->lpfc_rampdown_queue_depth(phba);
-		spin_lock_irqsave(&phba->hbalock, iflag);
-	}
+		/*
+		 * If resource errors reported from HBA, reduce
+		 * queuedepths of the SCSI device.
+		 */
+		if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+		    ((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) ==
+		     IOERR_NO_RESOURCES)) {
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			phba->lpfc_rampdown_queue_depth(phba);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+		}
 
-	if (ulp_status) {
-		/* Rsp ring <ringno> error: IOCB */
-		if (phba->sli_rev < LPFC_SLI_REV4) {
-			irsp = &rspiocbp->iocb;
-			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
-					"0328 Rsp Ring %d error: ulp_status x%x "
-					"IOCB Data: "
-					"x%08x x%08x x%08x x%08x "
-					"x%08x x%08x x%08x x%08x "
-					"x%08x x%08x x%08x x%08x "
-					"x%08x x%08x x%08x x%08x\n",
-					pring->ringno, ulp_status,
-					get_job_ulpword(rspiocbp, 0),
-					get_job_ulpword(rspiocbp, 1),
-					get_job_ulpword(rspiocbp, 2),
-					get_job_ulpword(rspiocbp, 3),
-					get_job_ulpword(rspiocbp, 4),
-					get_job_ulpword(rspiocbp, 5),
-					*(((uint32_t *)irsp) + 6),
-					*(((uint32_t *)irsp) + 7),
-					*(((uint32_t *)irsp) + 8),
-					*(((uint32_t *)irsp) + 9),
-					*(((uint32_t *)irsp) + 10),
-					*(((uint32_t *)irsp) + 11),
-					*(((uint32_t *)irsp) + 12),
-					*(((uint32_t *)irsp) + 13),
-					*(((uint32_t *)irsp) + 14),
-					*(((uint32_t *)irsp) + 15));
-		} else {
+		if (irsp->ulpStatus) {
+			/* Rsp ring <ringno> error: IOCB */
 			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
-					"0321 Rsp Ring %d error: "
+					"0328 Rsp Ring %d error: "
 					"IOCB Data: "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x "
+					"x%x x%x x%x x%x "
 					"x%x x%x x%x x%x\n",
 					pring->ringno,
-					rspiocbp->wcqe_cmpl.word0,
-					rspiocbp->wcqe_cmpl.total_data_placed,
-					rspiocbp->wcqe_cmpl.parameter,
-					rspiocbp->wcqe_cmpl.word3);
+					irsp->un.ulpWord[0],
+					irsp->un.ulpWord[1],
+					irsp->un.ulpWord[2],
+					irsp->un.ulpWord[3],
+					irsp->un.ulpWord[4],
+					irsp->un.ulpWord[5],
+					*(((uint32_t *) irsp) + 6),
+					*(((uint32_t *) irsp) + 7),
+					*(((uint32_t *) irsp) + 8),
+					*(((uint32_t *) irsp) + 9),
+					*(((uint32_t *) irsp) + 10),
+					*(((uint32_t *) irsp) + 11),
+					*(((uint32_t *) irsp) + 12),
+					*(((uint32_t *) irsp) + 13),
+					*(((uint32_t *) irsp) + 14),
+					*(((uint32_t *) irsp) + 15));
 		}
-	}
 
+		/*
+		 * Fetch the IOCB command type and call the correct completion
+		 * routine. Solicited and Unsolicited IOCBs on the ELS ring
+		 * get freed back to the lpfc_iocb_list by the discovery
+		 * kernel thread.
+		 */
+		iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
+		type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
+		switch (type) {
+		case LPFC_SOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			break;
 
-	/*
-	 * Fetch the iocb command type and call the correct completion
-	 * routine. Solicited and Unsolicited IOCBs on the ELS ring
-	 * get freed back to the lpfc_iocb_list by the discovery
-	 * kernel thread.
-	 */
-	cmd_type = ulp_command & CMD_IOCB_MASK;
-	type = lpfc_sli_iocb_cmd_type(cmd_type);
-	switch (type) {
-	case LPFC_SOL_IOCB:
-		spin_unlock_irqrestore(&phba->hbalock, iflag);
-		rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
-		spin_lock_irqsave(&phba->hbalock, iflag);
-		break;
-	case LPFC_UNSOL_IOCB:
-		spin_unlock_irqrestore(&phba->hbalock, iflag);
-		rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
-		spin_lock_irqsave(&phba->hbalock, iflag);
-		if (!rc)
-			free_saveq = 0;
-		break;
-	case LPFC_ABORT_IOCB:
-		cmdiocb = NULL;
-		if (ulp_command != CMD_XRI_ABORTED_CX)
-			cmdiocb = lpfc_sli_iocbq_lookup(phba, pring,
-							saveq);
-		if (cmdiocb) {
-			/* Call the specified completion routine */
-			if (cmdiocb->cmd_cmpl) {
+		case LPFC_UNSOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			if (!rc)
+				free_saveq = 0;
+			break;
+
+		case LPFC_ABORT_IOCB:
+			cmdiocbp = NULL;
+			if (irsp->ulpCommand != CMD_XRI_ABORTED_CX) {
 				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				cmdiocb->cmd_cmpl(phba, cmdiocb, saveq);
+				cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring,
+								 saveq);
 				spin_lock_irqsave(&phba->hbalock, iflag);
+			}
+			if (cmdiocbp) {
+				/* Call the specified completion routine */
+				if (cmdiocbp->cmd_cmpl) {
+					spin_unlock_irqrestore(&phba->hbalock,
+							       iflag);
+					(cmdiocbp->cmd_cmpl)(phba, cmdiocbp,
+							      saveq);
+					spin_lock_irqsave(&phba->hbalock,
+							  iflag);
+				} else
+					__lpfc_sli_release_iocbq(phba,
+								 cmdiocbp);
+			}
+			break;
+
+		case LPFC_UNKNOWN_IOCB:
+			if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
+				char adaptermsg[LPFC_MAX_ADPTMSG];
+				memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+				memcpy(&adaptermsg[0], (uint8_t *)irsp,
+				       MAX_MSG_DATA);
+				dev_warn(&((phba->pcidev)->dev),
+					 "lpfc%d: %s\n",
+					 phba->brd_no, adaptermsg);
 			} else {
-				__lpfc_sli_release_iocbq(phba, cmdiocb);
+				/* Unknown IOCB command */
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"0335 Unknown IOCB "
+						"command Data: x%x "
+						"x%x x%x x%x\n",
+						irsp->ulpCommand,
+						irsp->ulpStatus,
+						irsp->ulpIoTag,
+						irsp->ulpContext);
 			}
+			break;
 		}
-		break;
-	case LPFC_UNKNOWN_IOCB:
-		if (ulp_command == CMD_ADAPTER_MSG) {
-			char adaptermsg[LPFC_MAX_ADPTMSG];
-
-			memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
-			memcpy(&adaptermsg[0], (uint8_t *)&rspiocbp->wqe,
-			       MAX_MSG_DATA);
-			dev_warn(&((phba->pcidev)->dev),
-				 "lpfc%d: %s\n",
-				 phba->brd_no, adaptermsg);
-		} else {
-			/* Unknown command */
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-					"0335 Unknown IOCB "
-					"command Data: x%x "
-					"x%x x%x x%x\n",
-					ulp_command,
-					ulp_status,
-					get_wqe_reqtag(rspiocbp),
-					get_job_ulpcontext(phba, rspiocbp));
-		}
-		break;
-	}
 
-	if (free_saveq) {
-		list_for_each_entry_safe(rspiocbp, next_iocb,
-					 &saveq->list, list) {
-			list_del_init(&rspiocbp->list);
-			__lpfc_sli_release_iocbq(phba, rspiocbp);
+		if (free_saveq) {
+			list_for_each_entry_safe(rspiocbp, next_iocb,
+						 &saveq->list, list) {
+				list_del_init(&rspiocbp->list);
+				__lpfc_sli_release_iocbq(phba, rspiocbp);
+			}
+			__lpfc_sli_release_iocbq(phba, saveq);
 		}
-		__lpfc_sli_release_iocbq(phba, saveq);
+		rspiocbp = NULL;
 	}
-	rspiocbp = NULL;
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
 	return rspiocbp;
 }
@@ -4428,8 +4431,8 @@ lpfc_sli_handle_slow_ring_event_s4(struc
 			irspiocbq = container_of(cq_event, struct lpfc_iocbq,
 						 cq_event);
 			/* Translate ELS WCQE to response IOCBQ */
-			irspiocbq = lpfc_sli4_els_preprocess_rspiocbq(phba,
-								      irspiocbq);
+			irspiocbq = lpfc_sli4_els_wcqe_to_rspiocbq(phba,
+								   irspiocbq);
 			if (irspiocbq)
 				lpfc_sli_sp_handle_rspiocb(phba, pring,
 							   irspiocbq);
@@ -10973,17 +10976,7 @@ __lpfc_sli_issue_fcp_io_s4(struct lpfc_h
 	int rc;
 	struct lpfc_io_buf *lpfc_cmd =
 		(struct lpfc_io_buf *)piocb->context1;
-
-	lpfc_prep_embed_io(phba, lpfc_cmd);
-	rc = lpfc_sli4_issue_wqe(phba, lpfc_cmd->hdwq, piocb);
-	return rc;
-}
-
-void
-lpfc_prep_embed_io(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
-{
-	struct lpfc_iocbq *piocb = &lpfc_cmd->cur_iocbq;
-	union lpfc_wqe128 *wqe = &lpfc_cmd->cur_iocbq.wqe;
+	union lpfc_wqe128 *wqe = &piocb->wqe;
 	struct sli4_sge *sgl;
 
 	/* 128 byte wqe support here */
@@ -11032,6 +11025,8 @@ lpfc_prep_embed_io(struct lpfc_hba *phba
 			wqe->words[31] = piocb->vmid_tag.app_id;
 		}
 	}
+	rc = lpfc_sli4_issue_wqe(phba, lpfc_cmd->hdwq, piocb);
+	return rc;
 }
 
 /**
@@ -11053,10 +11048,9 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba
 			 struct lpfc_iocbq *piocb, uint32_t flag)
 {
 	struct lpfc_sglq *sglq;
-	union lpfc_wqe128 *wqe;
+	union lpfc_wqe128 wqe;
 	struct lpfc_queue *wq;
 	struct lpfc_sli_ring *pring;
-	u32 ulp_command = get_job_cmnd(phba, piocb);
 
 	/* Get the WQ */
 	if ((piocb->cmd_flag & LPFC_IO_FCP) ||
@@ -11074,9 +11068,10 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba
 	 */
 
 	lockdep_assert_held(&pring->ring_lock);
-	wqe = &piocb->wqe;
+
 	if (piocb->sli4_xritag == NO_XRI) {
-		if (ulp_command == CMD_ABORT_XRI_WQE)
+		if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
+		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
 			sglq = NULL;
 		else {
 			if (!list_empty(&pring->txq)) {
@@ -11117,24 +11112,14 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba
 	if (sglq) {
 		piocb->sli4_lxritag = sglq->sli4_lxritag;
 		piocb->sli4_xritag = sglq->sli4_xritag;
-
-		/* ABTS sent by initiator to CT exchange, the
-		 * RX_ID field will be filled with the newly
-		 * allocated responder XRI.
-		 */
-		if (ulp_command == CMD_XMIT_BLS_RSP64_CX &&
-		    piocb->abort_bls == LPFC_ABTS_UNSOL_INT)
-			bf_set(xmit_bls_rsp64_rxid, &wqe->xmit_bls_rsp,
-			       piocb->sli4_xritag);
-
-		bf_set(wqe_xri_tag, &wqe->generic.wqe_com,
-		       piocb->sli4_xritag);
-
-		if (lpfc_wqe_bpl2sgl(phba, piocb, sglq) == NO_XRI)
+		if (NO_XRI == lpfc_sli4_bpl2sgl(phba, piocb, sglq))
 			return IOCB_ERROR;
 	}
 
-	if (lpfc_sli4_wq_put(wq, wqe))
+	if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
+		return IOCB_ERROR;
+
+	if (lpfc_sli4_wq_put(wq, &wqe))
 		return IOCB_ERROR;
 	lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
 
@@ -14132,7 +14117,123 @@ void lpfc_sli4_els_xri_abort_event_proc(
 }
 
 /**
- * lpfc_sli4_els_preprocess_rspiocbq - Get response iocbq from els wcqe
+ * lpfc_sli4_iocb_param_transfer - Transfer pIocbOut and cmpl status to pIocbIn
+ * @phba: pointer to lpfc hba data structure
+ * @pIocbIn: pointer to the rspiocbq
+ * @pIocbOut: pointer to the cmdiocbq
+ * @wcqe: pointer to the complete wcqe
+ *
+ * This routine transfers the fields of a command iocbq to a response iocbq
+ * by copying all the IOCB fields from command iocbq and transferring the
+ * completion status information from the complete wcqe.
+ **/
+static void
+lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba,
+			      struct lpfc_iocbq *pIocbIn,
+			      struct lpfc_iocbq *pIocbOut,
+			      struct lpfc_wcqe_complete *wcqe)
+{
+	int numBdes, i;
+	unsigned long iflags;
+	uint32_t status, max_response;
+	struct lpfc_dmabuf *dmabuf;
+	struct ulp_bde64 *bpl, bde;
+	size_t offset = offsetof(struct lpfc_iocbq, iocb);
+
+	memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
+	       sizeof(struct lpfc_iocbq) - offset);
+	/* Map WCQE parameters into irspiocb parameters */
+	status = bf_get(lpfc_wcqe_c_status, wcqe);
+	pIocbIn->iocb.ulpStatus = (status & LPFC_IOCB_STATUS_MASK);
+	if (pIocbOut->cmd_flag & LPFC_IO_FCP)
+		if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
+			pIocbIn->iocb.un.fcpi.fcpi_parm =
+					pIocbOut->iocb.un.fcpi.fcpi_parm -
+					wcqe->total_data_placed;
+		else
+			pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+	else {
+		pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+		switch (pIocbOut->iocb.ulpCommand) {
+		case CMD_ELS_REQUEST64_CR:
+			dmabuf = (struct lpfc_dmabuf *)pIocbOut->context3;
+			bpl  = (struct ulp_bde64 *)dmabuf->virt;
+			bde.tus.w = le32_to_cpu(bpl[1].tus.w);
+			max_response = bde.tus.f.bdeSize;
+			break;
+		case CMD_GEN_REQUEST64_CR:
+			max_response = 0;
+			if (!pIocbOut->context3)
+				break;
+			numBdes = pIocbOut->iocb.un.genreq64.bdl.bdeSize/
+					sizeof(struct ulp_bde64);
+			dmabuf = (struct lpfc_dmabuf *)pIocbOut->context3;
+			bpl = (struct ulp_bde64 *)dmabuf->virt;
+			for (i = 0; i < numBdes; i++) {
+				bde.tus.w = le32_to_cpu(bpl[i].tus.w);
+				if (bde.tus.f.bdeFlags != BUFF_TYPE_BDE_64)
+					max_response += bde.tus.f.bdeSize;
+			}
+			break;
+		default:
+			max_response = wcqe->total_data_placed;
+			break;
+		}
+		if (max_response < wcqe->total_data_placed)
+			pIocbIn->iocb.un.genreq64.bdl.bdeSize = max_response;
+		else
+			pIocbIn->iocb.un.genreq64.bdl.bdeSize =
+				wcqe->total_data_placed;
+	}
+
+	/* Convert BG errors for completion status */
+	if (status == CQE_STATUS_DI_ERROR) {
+		pIocbIn->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
+
+		if (bf_get(lpfc_wcqe_c_bg_edir, wcqe))
+			pIocbIn->iocb.un.ulpWord[4] = IOERR_RX_DMA_FAILED;
+		else
+			pIocbIn->iocb.un.ulpWord[4] = IOERR_TX_DMA_FAILED;
+
+		pIocbIn->iocb.unsli3.sli3_bg.bgstat = 0;
+		if (bf_get(lpfc_wcqe_c_bg_ge, wcqe)) /* Guard Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_GUARD_ERR_MASK;
+		if (bf_get(lpfc_wcqe_c_bg_ae, wcqe)) /* App Tag Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_APPTAG_ERR_MASK;
+		if (bf_get(lpfc_wcqe_c_bg_re, wcqe)) /* Ref Tag Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_REFTAG_ERR_MASK;
+
+		/* Check to see if there was any good data before the error */
+		if (bf_get(lpfc_wcqe_c_bg_tdpv, wcqe)) {
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_HI_WATER_MARK_PRESENT_MASK;
+			pIocbIn->iocb.unsli3.sli3_bg.bghm =
+				wcqe->total_data_placed;
+		}
+
+		/*
+		* Set ALL the error bits to indicate we don't know what
+		* type of error it is.
+		*/
+		if (!pIocbIn->iocb.unsli3.sli3_bg.bgstat)
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				(BGS_REFTAG_ERR_MASK | BGS_APPTAG_ERR_MASK |
+				BGS_GUARD_ERR_MASK);
+	}
+
+	/* Pick up HBA exchange busy condition */
+	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		pIocbIn->cmd_flag |= LPFC_EXCHANGE_BUSY;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+	}
+}
+
+/**
+ * lpfc_sli4_els_wcqe_to_rspiocbq - Get response iocbq from els wcqe
  * @phba: Pointer to HBA context object.
  * @irspiocbq: Pointer to work-queue completion queue entry.
  *
@@ -14143,8 +14244,8 @@ void lpfc_sli4_els_xri_abort_event_proc(
  * Return: Pointer to the receive IOCBQ, NULL otherwise.
  **/
 static struct lpfc_iocbq *
-lpfc_sli4_els_preprocess_rspiocbq(struct lpfc_hba *phba,
-				  struct lpfc_iocbq *irspiocbq)
+lpfc_sli4_els_wcqe_to_rspiocbq(struct lpfc_hba *phba,
+			       struct lpfc_iocbq *irspiocbq)
 {
 	struct lpfc_sli_ring *pring;
 	struct lpfc_iocbq *cmdiocbq;
@@ -14156,13 +14257,11 @@ lpfc_sli4_els_preprocess_rspiocbq(struct
 		return NULL;
 
 	wcqe = &irspiocbq->cq_event.cqe.wcqe_cmpl;
-	spin_lock_irqsave(&pring->ring_lock, iflags);
 	pring->stats.iocb_event++;
 	/* Look up the ELS command IOCB and create pseudo response IOCB */
 	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
 				bf_get(lpfc_wcqe_c_request_tag, wcqe));
 	if (unlikely(!cmdiocbq)) {
-		spin_unlock_irqrestore(&pring->ring_lock, iflags);
 		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 				"0386 ELS complete with no corresponding "
 				"cmdiocb: 0x%x 0x%x 0x%x 0x%x\n",
@@ -14172,18 +14271,13 @@ lpfc_sli4_els_preprocess_rspiocbq(struct
 		return NULL;
 	}
 
-	memcpy(&irspiocbq->wqe, &cmdiocbq->wqe, sizeof(union lpfc_wqe128));
-	memcpy(&irspiocbq->wcqe_cmpl, wcqe, sizeof(*wcqe));
-
+	spin_lock_irqsave(&pring->ring_lock, iflags);
 	/* Put the iocb back on the txcmplq */
 	lpfc_sli_ringtxcmpl_put(phba, pring, cmdiocbq);
 	spin_unlock_irqrestore(&pring->ring_lock, iflags);
 
-	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
-		spin_lock_irqsave(&phba->hbalock, iflags);
-		cmdiocbq->cmd_flag |= LPFC_EXCHANGE_BUSY;
-		spin_unlock_irqrestore(&phba->hbalock, iflags);
-	}
+	/* Fake the irspiocbq and copy necessary response information */
+	lpfc_sli4_iocb_param_transfer(phba, irspiocbq, cmdiocbq, wcqe);
 
 	return irspiocbq;
 }
@@ -15009,9 +15103,9 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc
 	/* Look up the FCP command IOCB and create pseudo response IOCB */
 	spin_lock_irqsave(&pring->ring_lock, iflags);
 	pring->stats.iocb_event++;
+	spin_unlock_irqrestore(&pring->ring_lock, iflags);
 	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
 				bf_get(lpfc_wcqe_c_request_tag, wcqe));
-	spin_unlock_irqrestore(&pring->ring_lock, iflags);
 	if (unlikely(!cmdiocbq)) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 				"0374 FCP complete with no corresponding "
@@ -18872,16 +18966,13 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_vpor
 	ctiocb->sli4_lxritag = NO_XRI;
 	ctiocb->sli4_xritag = NO_XRI;
 
-	if (fctl & FC_FC_EX_CTX) {
+	if (fctl & FC_FC_EX_CTX)
 		/* Exchange responder sent the abort so we
 		 * own the oxid.
 		 */
-		ctiocb->abort_bls = LPFC_ABTS_UNSOL_RSP;
 		xri = oxid;
-	} else {
-		ctiocb->abort_bls = LPFC_ABTS_UNSOL_INT;
+	else
 		xri = rxid;
-	}
 	lxri = lpfc_sli4_xri_inrange(phba, xri);
 	if (lxri != NO_XRI)
 		lpfc_set_rrq_active(phba, ndlp, lxri,
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -76,8 +76,6 @@ struct lpfc_iocbq {
 	struct lpfc_wcqe_complete wcqe_cmpl;	/* WQE cmpl */
 
 	uint8_t num_bdes;
-	uint8_t abort_bls;	/* ABTS by initiator or responder */
-
 	uint8_t priority;	/* OAS priority */
 	uint8_t retry;		/* retry counter for IOCB cmd - if needed */
 	u32 cmd_flag;

[PATCH 5.15 052/132] Revert "scsi: lpfc: SLI path split: Refactor lpfc_iocbq"

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

This reverts commit 1c5e670d6a5a8e7e99b51f45e79879f7828bd2ec.

LTS 5.15 pulled in several lpfc "SLI Path split" patches.  The Path
Split mods were a 14-patch set, which refactors the driver from
to split the sli-3 hw (now eol) from the sli-4 hw and use sli4
structures natively. The patches are highly inter-related.

Given only some of the patches were included, it created a situation
where FLOGI's fail, thus SLI Ports can't start communication.

Reverting this patch as its one of the partial Path Split patches
that was included.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_bsg.c       |   50 ++---
 drivers/scsi/lpfc/lpfc_crtn.h      |    2 
 drivers/scsi/lpfc/lpfc_ct.c        |    8 
 drivers/scsi/lpfc/lpfc_els.c       |  139 +++++++--------
 drivers/scsi/lpfc/lpfc_init.c      |   11 -
 drivers/scsi/lpfc/lpfc_nportdisc.c |    4 
 drivers/scsi/lpfc/lpfc_nvme.c      |   34 +--
 drivers/scsi/lpfc/lpfc_nvme.h      |    6 
 drivers/scsi/lpfc/lpfc_nvmet.c     |   83 ++++-----
 drivers/scsi/lpfc/lpfc_scsi.c      |   75 ++++----
 drivers/scsi/lpfc/lpfc_sli.c       |  340 +++++++++++++++++++------------------
 drivers/scsi/lpfc/lpfc_sli.h       |   24 +-
 12 files changed, 391 insertions(+), 385 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -325,7 +325,7 @@ lpfc_bsg_send_mgmt_cmd_cmp(struct lpfc_h
 
 	/* Close the timeout handler abort window */
 	spin_lock_irqsave(&phba->hbalock, flags);
-	cmdiocbq->cmd_flag &= ~LPFC_IO_CMD_OUTSTANDING;
+	cmdiocbq->iocb_flag &= ~LPFC_IO_CMD_OUTSTANDING;
 	spin_unlock_irqrestore(&phba->hbalock, flags);
 
 	iocb = &dd_data->context_un.iocb;
@@ -481,11 +481,11 @@ lpfc_bsg_send_mgmt_cmd(struct bsg_job *j
 	cmd->ulpOwner = OWN_CHIP;
 	cmdiocbq->vport = phba->pport;
 	cmdiocbq->context3 = bmp;
-	cmdiocbq->cmd_flag |= LPFC_IO_LIBDFC;
+	cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
 	timeout = phba->fc_ratov * 2;
 	cmd->ulpTimeout = timeout;
 
-	cmdiocbq->cmd_cmpl = lpfc_bsg_send_mgmt_cmd_cmp;
+	cmdiocbq->iocb_cmpl = lpfc_bsg_send_mgmt_cmd_cmp;
 	cmdiocbq->context1 = dd_data;
 	cmdiocbq->context2 = cmp;
 	cmdiocbq->context3 = bmp;
@@ -516,9 +516,9 @@ lpfc_bsg_send_mgmt_cmd(struct bsg_job *j
 	if (iocb_stat == IOCB_SUCCESS) {
 		spin_lock_irqsave(&phba->hbalock, flags);
 		/* make sure the I/O had not been completed yet */
-		if (cmdiocbq->cmd_flag & LPFC_IO_LIBDFC) {
+		if (cmdiocbq->iocb_flag & LPFC_IO_LIBDFC) {
 			/* open up abort window to timeout handler */
-			cmdiocbq->cmd_flag |= LPFC_IO_CMD_OUTSTANDING;
+			cmdiocbq->iocb_flag |= LPFC_IO_CMD_OUTSTANDING;
 		}
 		spin_unlock_irqrestore(&phba->hbalock, flags);
 		return 0; /* done for now */
@@ -600,7 +600,7 @@ lpfc_bsg_rport_els_cmp(struct lpfc_hba *
 
 	/* Close the timeout handler abort window */
 	spin_lock_irqsave(&phba->hbalock, flags);
-	cmdiocbq->cmd_flag &= ~LPFC_IO_CMD_OUTSTANDING;
+	cmdiocbq->iocb_flag &= ~LPFC_IO_CMD_OUTSTANDING;
 	spin_unlock_irqrestore(&phba->hbalock, flags);
 
 	rsp = &rspiocbq->iocb;
@@ -726,10 +726,10 @@ lpfc_bsg_rport_els(struct bsg_job *job)
 		cmdiocbq->iocb.ulpContext = phba->sli4_hba.rpi_ids[rpi];
 	else
 		cmdiocbq->iocb.ulpContext = rpi;
-	cmdiocbq->cmd_flag |= LPFC_IO_LIBDFC;
+	cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
 	cmdiocbq->context1 = dd_data;
 	cmdiocbq->context_un.ndlp = ndlp;
-	cmdiocbq->cmd_cmpl = lpfc_bsg_rport_els_cmp;
+	cmdiocbq->iocb_cmpl = lpfc_bsg_rport_els_cmp;
 	dd_data->type = TYPE_IOCB;
 	dd_data->set_job = job;
 	dd_data->context_un.iocb.cmdiocbq = cmdiocbq;
@@ -757,9 +757,9 @@ lpfc_bsg_rport_els(struct bsg_job *job)
 	if (rc == IOCB_SUCCESS) {
 		spin_lock_irqsave(&phba->hbalock, flags);
 		/* make sure the I/O had not been completed/released */
-		if (cmdiocbq->cmd_flag & LPFC_IO_LIBDFC) {
+		if (cmdiocbq->iocb_flag & LPFC_IO_LIBDFC) {
 			/* open up abort window to timeout handler */
-			cmdiocbq->cmd_flag |= LPFC_IO_CMD_OUTSTANDING;
+			cmdiocbq->iocb_flag |= LPFC_IO_CMD_OUTSTANDING;
 		}
 		spin_unlock_irqrestore(&phba->hbalock, flags);
 		return 0; /* done for now */
@@ -1053,7 +1053,7 @@ lpfc_bsg_ct_unsol_event(struct lpfc_hba
 							lpfc_in_buf_free(phba,
 									dmabuf);
 						} else {
-							lpfc_sli3_post_buffer(phba,
+							lpfc_post_buffer(phba,
 									 pring,
 									 1);
 						}
@@ -1061,7 +1061,7 @@ lpfc_bsg_ct_unsol_event(struct lpfc_hba
 					default:
 						if (!(phba->sli3_options &
 						      LPFC_SLI3_HBQ_ENABLED))
-							lpfc_sli3_post_buffer(phba,
+							lpfc_post_buffer(phba,
 									 pring,
 									 1);
 						break;
@@ -1395,7 +1395,7 @@ lpfc_issue_ct_rsp_cmp(struct lpfc_hba *p
 
 	/* Close the timeout handler abort window */
 	spin_lock_irqsave(&phba->hbalock, flags);
-	cmdiocbq->cmd_flag &= ~LPFC_IO_CMD_OUTSTANDING;
+	cmdiocbq->iocb_flag &= ~LPFC_IO_CMD_OUTSTANDING;
 	spin_unlock_irqrestore(&phba->hbalock, flags);
 
 	ndlp = dd_data->context_un.iocb.ndlp;
@@ -1549,13 +1549,13 @@ lpfc_issue_ct_rsp(struct lpfc_hba *phba,
 		"2722 Xmit CT response on exchange x%x Data: x%x x%x x%x\n",
 		icmd->ulpContext, icmd->ulpIoTag, tag, phba->link_state);
 
-	ctiocb->cmd_flag |= LPFC_IO_LIBDFC;
+	ctiocb->iocb_flag |= LPFC_IO_LIBDFC;
 	ctiocb->vport = phba->pport;
 	ctiocb->context1 = dd_data;
 	ctiocb->context2 = cmp;
 	ctiocb->context3 = bmp;
 	ctiocb->context_un.ndlp = ndlp;
-	ctiocb->cmd_cmpl = lpfc_issue_ct_rsp_cmp;
+	ctiocb->iocb_cmpl = lpfc_issue_ct_rsp_cmp;
 
 	dd_data->type = TYPE_IOCB;
 	dd_data->set_job = job;
@@ -1582,9 +1582,9 @@ lpfc_issue_ct_rsp(struct lpfc_hba *phba,
 	if (rc == IOCB_SUCCESS) {
 		spin_lock_irqsave(&phba->hbalock, flags);
 		/* make sure the I/O had not been completed/released */
-		if (ctiocb->cmd_flag & LPFC_IO_LIBDFC) {
+		if (ctiocb->iocb_flag & LPFC_IO_LIBDFC) {
 			/* open up abort window to timeout handler */
-			ctiocb->cmd_flag |= LPFC_IO_CMD_OUTSTANDING;
+			ctiocb->iocb_flag |= LPFC_IO_CMD_OUTSTANDING;
 		}
 		spin_unlock_irqrestore(&phba->hbalock, flags);
 		return 0; /* done for now */
@@ -2713,9 +2713,9 @@ static int lpfcdiag_loop_get_xri(struct
 	cmd->ulpClass = CLASS3;
 	cmd->ulpContext = rpi;
 
-	cmdiocbq->cmd_flag |= LPFC_IO_LIBDFC;
+	cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
 	cmdiocbq->vport = phba->pport;
-	cmdiocbq->cmd_cmpl = NULL;
+	cmdiocbq->iocb_cmpl = NULL;
 
 	iocb_stat = lpfc_sli_issue_iocb_wait(phba, LPFC_ELS_RING, cmdiocbq,
 				rspiocbq,
@@ -3286,10 +3286,10 @@ lpfc_bsg_diag_loopback_run(struct bsg_jo
 		cmdiocbq->sli4_xritag = NO_XRI;
 		cmd->unsli3.rcvsli3.ox_id = 0xffff;
 	}
-	cmdiocbq->cmd_flag |= LPFC_IO_LIBDFC;
-	cmdiocbq->cmd_flag |= LPFC_IO_LOOPBACK;
+	cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
+	cmdiocbq->iocb_flag |= LPFC_IO_LOOPBACK;
 	cmdiocbq->vport = phba->pport;
-	cmdiocbq->cmd_cmpl = NULL;
+	cmdiocbq->iocb_cmpl = NULL;
 	iocb_stat = lpfc_sli_issue_iocb_wait(phba, LPFC_ELS_RING, cmdiocbq,
 					     rspiocbq, (phba->fc_ratov * 2) +
 					     LPFC_DRVR_TIMEOUT);
@@ -5273,11 +5273,11 @@ lpfc_menlo_cmd(struct bsg_job *job)
 	cmd->ulpClass = CLASS3;
 	cmd->ulpOwner = OWN_CHIP;
 	cmd->ulpLe = 1; /* Limited Edition */
-	cmdiocbq->cmd_flag |= LPFC_IO_LIBDFC;
+	cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC;
 	cmdiocbq->vport = phba->pport;
 	/* We want the firmware to timeout before we do */
 	cmd->ulpTimeout = MENLO_TIMEOUT - 5;
-	cmdiocbq->cmd_cmpl = lpfc_bsg_menlo_cmd_cmp;
+	cmdiocbq->iocb_cmpl = lpfc_bsg_menlo_cmd_cmp;
 	cmdiocbq->context1 = dd_data;
 	cmdiocbq->context2 = cmp;
 	cmdiocbq->context3 = bmp;
@@ -6001,7 +6001,7 @@ lpfc_bsg_timeout(struct bsg_job *job)
 
 		spin_lock_irqsave(&phba->hbalock, flags);
 		/* make sure the I/O abort window is still open */
-		if (!(cmdiocb->cmd_flag & LPFC_IO_CMD_OUTSTANDING)) {
+		if (!(cmdiocb->iocb_flag & LPFC_IO_CMD_OUTSTANDING)) {
 			spin_unlock_irqrestore(&phba->hbalock, flags);
 			return -EAGAIN;
 		}
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -210,7 +210,7 @@ int lpfc_config_port_post(struct lpfc_hb
 int lpfc_hba_down_prep(struct lpfc_hba *);
 int lpfc_hba_down_post(struct lpfc_hba *);
 void lpfc_hba_init(struct lpfc_hba *, uint32_t *);
-int lpfc_sli3_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt);
+int lpfc_post_buffer(struct lpfc_hba *, struct lpfc_sli_ring *, int);
 void lpfc_decode_firmware_rev(struct lpfc_hba *, char *, int);
 int lpfc_online(struct lpfc_hba *);
 void lpfc_unblock_mgmt_io(struct lpfc_hba *);
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -239,7 +239,7 @@ lpfc_ct_reject_event(struct lpfc_nodelis
 	cmdiocbq->context1 = lpfc_nlp_get(ndlp);
 	cmdiocbq->context2 = (uint8_t *)mp;
 	cmdiocbq->context3 = (uint8_t *)bmp;
-	cmdiocbq->cmd_cmpl = lpfc_ct_unsol_cmpl;
+	cmdiocbq->iocb_cmpl = lpfc_ct_unsol_cmpl;
 	icmd->ulpContext = rx_id;  /* Xri / rx_id */
 	icmd->unsli3.rcvsli3.ox_id = ox_id;
 	icmd->un.ulpWord[3] =
@@ -370,7 +370,7 @@ lpfc_ct_unsol_event(struct lpfc_hba *phb
 		/* Not enough posted buffers; Try posting more buffers */
 		phba->fc_stat.NoRcvBuf++;
 		if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED))
-			lpfc_sli3_post_buffer(phba, pring, 2);
+			lpfc_post_buffer(phba, pring, 2);
 		return;
 	}
 
@@ -447,7 +447,7 @@ lpfc_ct_unsol_event(struct lpfc_hba *phb
 				lpfc_ct_unsol_buffer(phba, iocbq, mp, size);
 				lpfc_in_buf_free(phba, mp);
 			}
-			lpfc_sli3_post_buffer(phba, pring, i);
+			lpfc_post_buffer(phba, pring, i);
 		}
 		list_del(&head);
 	}
@@ -652,7 +652,7 @@ lpfc_gen_req(struct lpfc_vport *vport, s
 			 "Data: x%x x%x\n",
 			 ndlp->nlp_DID, icmd->ulpIoTag,
 			 vport->port_state);
-	geniocb->cmd_cmpl = cmpl;
+	geniocb->iocb_cmpl = cmpl;
 	geniocb->drvrTimeout = icmd->ulpTimeout + LPFC_DRVR_TIMEOUT;
 	geniocb->vport = vport;
 	geniocb->retry = retry;
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -192,23 +192,23 @@ lpfc_prep_els_iocb(struct lpfc_vport *vp
 		 (elscmd == ELS_CMD_LOGO)))
 		switch (elscmd) {
 		case ELS_CMD_FLOGI:
-		elsiocb->cmd_flag |=
+		elsiocb->iocb_flag |=
 			((LPFC_ELS_ID_FLOGI << LPFC_FIP_ELS_ID_SHIFT)
 					& LPFC_FIP_ELS_ID_MASK);
 		break;
 		case ELS_CMD_FDISC:
-		elsiocb->cmd_flag |=
+		elsiocb->iocb_flag |=
 			((LPFC_ELS_ID_FDISC << LPFC_FIP_ELS_ID_SHIFT)
 					& LPFC_FIP_ELS_ID_MASK);
 		break;
 		case ELS_CMD_LOGO:
-		elsiocb->cmd_flag |=
+		elsiocb->iocb_flag |=
 			((LPFC_ELS_ID_LOGO << LPFC_FIP_ELS_ID_SHIFT)
 					& LPFC_FIP_ELS_ID_MASK);
 		break;
 		}
 	else
-		elsiocb->cmd_flag &= ~LPFC_FIP_ELS_ID_MASK;
+		elsiocb->iocb_flag &= ~LPFC_FIP_ELS_ID_MASK;
 
 	icmd = &elsiocb->iocb;
 
@@ -1252,10 +1252,10 @@ lpfc_cmpl_els_link_down(struct lpfc_hba
 			"6445 ELS completes after LINK_DOWN: "
 			" Status %x/%x cmd x%x flg x%x\n",
 			irsp->ulpStatus, irsp->un.ulpWord[4], cmd,
-			cmdiocb->cmd_flag);
+			cmdiocb->iocb_flag);
 
-	if (cmdiocb->cmd_flag & LPFC_IO_FABRIC) {
-		cmdiocb->cmd_flag &= ~LPFC_IO_FABRIC;
+	if (cmdiocb->iocb_flag & LPFC_IO_FABRIC) {
+		cmdiocb->iocb_flag &= ~LPFC_IO_FABRIC;
 		atomic_dec(&phba->fabric_iocb_count);
 	}
 	lpfc_els_free_iocb(phba, cmdiocb);
@@ -1370,7 +1370,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *
 	phba->fc_ratov = tmo;
 
 	phba->fc_stat.elsXmitFLOGI++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_flogi;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_flogi;
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
 		"Issue FLOGI:     opt:x%x",
@@ -1463,7 +1463,7 @@ lpfc_els_abort_flogi(struct lpfc_hba *ph
 			if (ndlp && ndlp->nlp_DID == Fabric_DID) {
 				if ((phba->pport->fc_flag & FC_PT2PT) &&
 				    !(phba->pport->fc_flag & FC_PT2PT_PLOGI))
-					iocb->fabric_cmd_cmpl =
+					iocb->fabric_iocb_cmpl =
 						lpfc_ignore_els_cmpl;
 				lpfc_sli_issue_abort_iotag(phba, pring, iocb,
 							   NULL);
@@ -2226,7 +2226,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *
 	}
 
 	phba->fc_stat.elsXmitPLOGI++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_plogi;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
 			      "Issue PLOGI:     did:x%x refcnt %d",
@@ -2478,7 +2478,7 @@ lpfc_issue_els_prli(struct lpfc_vport *v
 		/* For FCP support */
 		npr->prliType = PRLI_FCP_TYPE;
 		npr->initiatorFunc = 1;
-		elsiocb->cmd_flag |= LPFC_PRLI_FCP_REQ;
+		elsiocb->iocb_flag |= LPFC_PRLI_FCP_REQ;
 
 		/* Remove FCP type - processed. */
 		local_nlp_type &= ~NLP_FC4_FCP;
@@ -2512,14 +2512,14 @@ lpfc_issue_els_prli(struct lpfc_vport *v
 
 		npr_nvme->word1 = cpu_to_be32(npr_nvme->word1);
 		npr_nvme->word4 = cpu_to_be32(npr_nvme->word4);
-		elsiocb->cmd_flag |= LPFC_PRLI_NVME_REQ;
+		elsiocb->iocb_flag |= LPFC_PRLI_NVME_REQ;
 
 		/* Remove NVME type - processed. */
 		local_nlp_type &= ~NLP_FC4_NVME;
 	}
 
 	phba->fc_stat.elsXmitPRLI++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_prli;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_prli;
 	spin_lock_irq(&ndlp->lock);
 	ndlp->nlp_flag |= NLP_PRLI_SND;
 
@@ -2842,7 +2842,7 @@ lpfc_issue_els_adisc(struct lpfc_vport *
 	ap->DID = be32_to_cpu(vport->fc_myDID);
 
 	phba->fc_stat.elsXmitADISC++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_adisc;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_adisc;
 	spin_lock_irq(&ndlp->lock);
 	ndlp->nlp_flag |= NLP_ADISC_SND;
 	spin_unlock_irq(&ndlp->lock);
@@ -3065,7 +3065,7 @@ lpfc_issue_els_logo(struct lpfc_vport *v
 	memcpy(pcmd, &vport->fc_portname, sizeof(struct lpfc_name));
 
 	phba->fc_stat.elsXmitLOGO++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_logo;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_logo;
 	spin_lock_irq(&ndlp->lock);
 	ndlp->nlp_flag |= NLP_LOGO_SND;
 	ndlp->nlp_flag &= ~NLP_ISSUE_LOGO;
@@ -3417,7 +3417,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vp
 		ndlp->nlp_DID, 0, 0);
 
 	phba->fc_stat.elsXmitSCR++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_disc_cmd;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_disc_cmd;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -3514,7 +3514,7 @@ lpfc_issue_els_rscn(struct lpfc_vport *v
 	event->portid.rscn_fid[2] = nportid & 0x000000FF;
 
 	phba->fc_stat.elsXmitRSCN++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_cmd;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -3613,7 +3613,7 @@ lpfc_issue_els_farpr(struct lpfc_vport *
 		ndlp->nlp_DID, 0, 0);
 
 	phba->fc_stat.elsXmitFARPR++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_cmd;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -3704,7 +3704,7 @@ lpfc_issue_els_rdf(struct lpfc_vport *vp
 			 phba->cgn_reg_fpin);
 
 	phba->cgn_fpin_frequency = LPFC_FPIN_INIT_FREQ;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_disc_cmd;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_disc_cmd;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -4154,7 +4154,7 @@ lpfc_issue_els_edc(struct lpfc_vport *vp
 			 ndlp->nlp_DID, phba->cgn_reg_signal,
 			 phba->cgn_reg_fpin);
 
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_disc_cmd;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_disc_cmd;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -4968,12 +4968,12 @@ lpfc_els_free_iocb(struct lpfc_hba *phba
 
 	/* context2  = cmd,  context2->next = rsp, context3 = bpl */
 	if (elsiocb->context2) {
-		if (elsiocb->cmd_flag & LPFC_DELAY_MEM_FREE) {
+		if (elsiocb->iocb_flag & LPFC_DELAY_MEM_FREE) {
 			/* Firmware could still be in progress of DMAing
 			 * payload, so don't free data buffer till after
 			 * a hbeat.
 			 */
-			elsiocb->cmd_flag &= ~LPFC_DELAY_MEM_FREE;
+			elsiocb->iocb_flag &= ~LPFC_DELAY_MEM_FREE;
 			buf_ptr = elsiocb->context2;
 			elsiocb->context2 = NULL;
 			if (buf_ptr) {
@@ -5480,9 +5480,9 @@ lpfc_els_rsp_acc(struct lpfc_vport *vpor
 			ndlp->nlp_flag & NLP_REG_LOGIN_SEND))
 			ndlp->nlp_flag &= ~NLP_LOGO_ACC;
 		spin_unlock_irq(&ndlp->lock);
-		elsiocb->cmd_cmpl = lpfc_cmpl_els_logo_acc;
+		elsiocb->iocb_cmpl = lpfc_cmpl_els_logo_acc;
 	} else {
-		elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+		elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	}
 
 	phba->fc_stat.elsXmitACC++;
@@ -5577,7 +5577,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *v
 		ndlp->nlp_DID, ndlp->nlp_flag, rejectError);
 
 	phba->fc_stat.elsXmitLSRJT++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -5657,7 +5657,7 @@ lpfc_issue_els_edc_rsp(struct lpfc_vport
 			      "Issue EDC ACC:      did:x%x flg:x%x refcnt %d",
 			      ndlp->nlp_DID, ndlp->nlp_flag,
 			      kref_read(&ndlp->kref));
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
@@ -5750,7 +5750,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport
 		      ndlp->nlp_DID, ndlp->nlp_flag, kref_read(&ndlp->kref));
 
 	phba->fc_stat.elsXmitACC++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -5924,7 +5924,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport
 		      ndlp->nlp_DID, ndlp->nlp_flag, kref_read(&ndlp->kref));
 
 	phba->fc_stat.elsXmitACC++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	elsiocb->context1 =  lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -6025,7 +6025,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport
 		      ndlp->nlp_DID, ndlp->nlp_flag, kref_read(&ndlp->kref));
 
 	phba->fc_stat.elsXmitACC++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -6139,7 +6139,7 @@ lpfc_els_rsp_echo_acc(struct lpfc_vport
 		      ndlp->nlp_DID, ndlp->nlp_flag, kref_read(&ndlp->kref));
 
 	phba->fc_stat.elsXmitACC++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	elsiocb->context1 =  lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -6803,7 +6803,7 @@ lpfc_els_rdp_cmpl(struct lpfc_hba *phba,
 				     rdp_context->page_a0, vport);
 
 	rdp_res->length = cpu_to_be32(len - 8);
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 
 	/* Now that we know the true size of the payload, update the BPL */
 	bpl = (struct ulp_bde64 *)
@@ -6844,7 +6844,7 @@ error:
 	stat->un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
 
 	phba->fc_stat.elsXmitLSRJT++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
 		lpfc_els_free_iocb(phba, elsiocb);
@@ -7066,7 +7066,7 @@ lpfc_els_lcb_rsp(struct lpfc_hba *phba,
 	lcb_res->capability = lcb_context->capability;
 	lcb_res->lcb_frequency = lcb_context->frequency;
 	lcb_res->lcb_duration = lcb_context->duration;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
 
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
@@ -7105,7 +7105,7 @@ error:
 	if (shdr_add_status == ADD_STATUS_OPERATION_ALREADY_ACTIVE)
 		stat->un.b.lsRjtRsnCodeExp = LSEXP_CMD_IN_PROGRESS;
 
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitLSRJT++;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
@@ -8172,7 +8172,7 @@ lpfc_els_rsp_rls_acc(struct lpfc_hba *ph
 			 elsiocb->iotag, elsiocb->iocb.ulpContext,
 			 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state,
 			 ndlp->nlp_rpi);
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
@@ -8324,7 +8324,7 @@ lpfc_els_rcv_rtv(struct lpfc_vport *vpor
 			 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state,
 			 ndlp->nlp_rpi,
 			rtv_rsp->ratov, rtv_rsp->edtov, rtv_rsp->qtov);
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
@@ -8401,7 +8401,7 @@ lpfc_issue_els_rrq(struct lpfc_vport *vp
 		"Issue RRQ:     did:x%x",
 		did, rrq->xritag, rrq->rxid);
 	elsiocb->context_un.rrq = rrq;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rrq;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rrq;
 
 	lpfc_nlp_get(ndlp);
 	elsiocb->context1 = ndlp;
@@ -8507,7 +8507,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *
 			 elsiocb->iotag, elsiocb->iocb.ulpContext,
 			 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state,
 			 ndlp->nlp_rpi);
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_rsp;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
 	phba->fc_stat.elsXmitACC++;
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
@@ -8947,7 +8947,7 @@ lpfc_els_timeout_handler(struct lpfc_vpo
 	list_for_each_entry_safe(piocb, tmp_iocb, &pring->txcmplq, list) {
 		cmd = &piocb->iocb;
 
-		if ((piocb->cmd_flag & LPFC_IO_LIBDFC) != 0 ||
+		if ((piocb->iocb_flag & LPFC_IO_LIBDFC) != 0 ||
 		    piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
 		    piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
 			continue;
@@ -9060,13 +9060,13 @@ lpfc_els_flush_cmd(struct lpfc_vport *vp
 
 	/* First we need to issue aborts to outstanding cmds on txcmpl */
 	list_for_each_entry_safe(piocb, tmp_iocb, &pring->txcmplq, list) {
-		if (piocb->cmd_flag & LPFC_IO_LIBDFC)
+		if (piocb->iocb_flag & LPFC_IO_LIBDFC)
 			continue;
 
 		if (piocb->vport != vport)
 			continue;
 
-		if (piocb->cmd_flag & LPFC_DRIVER_ABORTED)
+		if (piocb->iocb_flag & LPFC_DRIVER_ABORTED)
 			continue;
 
 		/* On the ELS ring we can have ELS_REQUESTs or
@@ -9084,7 +9084,7 @@ lpfc_els_flush_cmd(struct lpfc_vport *vp
 			 * and avoid any retry logic.
 			 */
 			if (phba->link_state == LPFC_LINK_DOWN)
-				piocb->cmd_cmpl = lpfc_cmpl_els_link_down;
+				piocb->iocb_cmpl = lpfc_cmpl_els_link_down;
 		}
 		if (cmd->ulpCommand == CMD_GEN_REQUEST64_CR)
 			list_add_tail(&piocb->dlist, &abort_list);
@@ -9119,8 +9119,9 @@ lpfc_els_flush_cmd(struct lpfc_vport *vp
 	list_for_each_entry_safe(piocb, tmp_iocb, &pring->txq, list) {
 		cmd = &piocb->iocb;
 
-		if (piocb->cmd_flag & LPFC_IO_LIBDFC)
+		if (piocb->iocb_flag & LPFC_IO_LIBDFC) {
 			continue;
+		}
 
 		/* Do not flush out the QUE_RING and ABORT/CLOSE iocbs */
 		if (cmd->ulpCommand == CMD_QUE_RING_BUF_CN ||
@@ -9765,7 +9766,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *p
 	payload_len = elsiocb->iocb.unsli3.rcvsli3.acc_len;
 	cmd = *payload;
 	if ((phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) == 0)
-		lpfc_sli3_post_buffer(phba, pring, 1);
+		lpfc_post_buffer(phba, pring, 1);
 
 	did = icmd->un.rcvels.remoteID;
 	if (icmd->ulpStatus) {
@@ -10238,7 +10239,7 @@ lpfc_els_unsol_event(struct lpfc_hba *ph
 		phba->fc_stat.NoRcvBuf++;
 		/* Not enough posted buffers; Try posting more buffers */
 		if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED))
-			lpfc_sli3_post_buffer(phba, pring, 0);
+			lpfc_post_buffer(phba, pring, 0);
 		return;
 	}
 
@@ -10874,7 +10875,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *
 	lpfc_set_disctmo(vport);
 
 	phba->fc_stat.elsXmitFDISC++;
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_fdisc;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_fdisc;
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
 		"Issue FDISC:     did:x%x",
@@ -10998,7 +10999,7 @@ lpfc_issue_els_npiv_logo(struct lpfc_vpo
 		"Issue LOGO npiv  did:x%x flg:x%x",
 		ndlp->nlp_DID, ndlp->nlp_flag, 0);
 
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_npiv_logo;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_npiv_logo;
 	spin_lock_irq(&ndlp->lock);
 	ndlp->nlp_flag |= NLP_LOGO_SND;
 	spin_unlock_irq(&ndlp->lock);
@@ -11083,9 +11084,9 @@ repeat:
 	}
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 	if (iocb) {
-		iocb->fabric_cmd_cmpl = iocb->cmd_cmpl;
-		iocb->cmd_cmpl = lpfc_cmpl_fabric_iocb;
-		iocb->cmd_flag |= LPFC_IO_FABRIC;
+		iocb->fabric_iocb_cmpl = iocb->iocb_cmpl;
+		iocb->iocb_cmpl = lpfc_cmpl_fabric_iocb;
+		iocb->iocb_flag |= LPFC_IO_FABRIC;
 
 		lpfc_debugfs_disc_trc(iocb->vport, LPFC_DISC_TRC_ELS_CMD,
 			"Fabric sched1:   ste:x%x",
@@ -11094,13 +11095,13 @@ repeat:
 		ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
 
 		if (ret == IOCB_ERROR) {
-			iocb->cmd_cmpl = iocb->fabric_cmd_cmpl;
-			iocb->fabric_cmd_cmpl = NULL;
-			iocb->cmd_flag &= ~LPFC_IO_FABRIC;
+			iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
+			iocb->fabric_iocb_cmpl = NULL;
+			iocb->iocb_flag &= ~LPFC_IO_FABRIC;
 			cmd = &iocb->iocb;
 			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
 			cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-			iocb->cmd_cmpl(phba, iocb, iocb);
+			iocb->iocb_cmpl(phba, iocb, iocb);
 
 			atomic_dec(&phba->fabric_iocb_count);
 			goto repeat;
@@ -11156,8 +11157,8 @@ lpfc_block_fabric_iocbs(struct lpfc_hba
  * @rspiocb: pointer to lpfc response iocb data structure.
  *
  * This routine is the callback function that is put to the fabric iocb's
- * callback function pointer (iocb->cmd_cmpl). The original iocb's callback
- * function pointer has been stored in iocb->fabric_cmd_cmpl. This callback
+ * callback function pointer (iocb->iocb_cmpl). The original iocb's callback
+ * function pointer has been stored in iocb->fabric_iocb_cmpl. This callback
  * function first restores and invokes the original iocb's callback function
  * and then invokes the lpfc_resume_fabric_iocbs() routine to issue the next
  * fabric bound iocb from the driver internal fabric iocb list onto the wire.
@@ -11168,7 +11169,7 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *p
 {
 	struct ls_rjt stat;
 
-	WARN_ON((cmdiocb->cmd_flag & LPFC_IO_FABRIC) != LPFC_IO_FABRIC);
+	BUG_ON((cmdiocb->iocb_flag & LPFC_IO_FABRIC) != LPFC_IO_FABRIC);
 
 	switch (rspiocb->iocb.ulpStatus) {
 		case IOSTAT_NPORT_RJT:
@@ -11194,10 +11195,10 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *p
 
 	BUG_ON(atomic_read(&phba->fabric_iocb_count) == 0);
 
-	cmdiocb->cmd_cmpl = cmdiocb->fabric_cmd_cmpl;
-	cmdiocb->fabric_cmd_cmpl = NULL;
-	cmdiocb->cmd_flag &= ~LPFC_IO_FABRIC;
-	cmdiocb->cmd_cmpl(phba, cmdiocb, rspiocb);
+	cmdiocb->iocb_cmpl = cmdiocb->fabric_iocb_cmpl;
+	cmdiocb->fabric_iocb_cmpl = NULL;
+	cmdiocb->iocb_flag &= ~LPFC_IO_FABRIC;
+	cmdiocb->iocb_cmpl(phba, cmdiocb, rspiocb);
 
 	atomic_dec(&phba->fabric_iocb_count);
 	if (!test_bit(FABRIC_COMANDS_BLOCKED, &phba->bit_flags)) {
@@ -11248,9 +11249,9 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *
 		atomic_inc(&phba->fabric_iocb_count);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 	if (ready) {
-		iocb->fabric_cmd_cmpl = iocb->cmd_cmpl;
-		iocb->cmd_cmpl = lpfc_cmpl_fabric_iocb;
-		iocb->cmd_flag |= LPFC_IO_FABRIC;
+		iocb->fabric_iocb_cmpl = iocb->iocb_cmpl;
+		iocb->iocb_cmpl = lpfc_cmpl_fabric_iocb;
+		iocb->iocb_flag |= LPFC_IO_FABRIC;
 
 		lpfc_debugfs_disc_trc(iocb->vport, LPFC_DISC_TRC_ELS_CMD,
 			"Fabric sched2:   ste:x%x",
@@ -11259,9 +11260,9 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *
 		ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
 
 		if (ret == IOCB_ERROR) {
-			iocb->cmd_cmpl = iocb->fabric_cmd_cmpl;
-			iocb->fabric_cmd_cmpl = NULL;
-			iocb->cmd_flag &= ~LPFC_IO_FABRIC;
+			iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
+			iocb->fabric_iocb_cmpl = NULL;
+			iocb->iocb_flag &= ~LPFC_IO_FABRIC;
 			atomic_dec(&phba->fabric_iocb_count);
 		}
 	} else {
@@ -11654,7 +11655,7 @@ int lpfc_issue_els_qfpa(struct lpfc_vpor
 	*((u32 *)(pcmd)) = ELS_CMD_QFPA;
 	pcmd += 4;
 
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_qfpa;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_qfpa;
 
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
@@ -11737,7 +11738,7 @@ lpfc_vmid_uvem(struct lpfc_vport *vport,
 	}
 	inst_desc->word6 = cpu_to_be32(inst_desc->word6);
 
-	elsiocb->cmd_cmpl = lpfc_cmpl_els_uvem;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_uvem;
 
 	elsiocb->context1 = lpfc_nlp_get(ndlp);
 	if (!elsiocb->context1) {
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -982,7 +982,7 @@ lpfc_hba_clean_txcmplq(struct lpfc_hba *
 		spin_lock_irq(&pring->ring_lock);
 		list_for_each_entry_safe(piocb, next_iocb,
 					 &pring->txcmplq, list)
-			piocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+			piocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
 		list_splice_init(&pring->txcmplq, &completions);
 		pring->txcmplq_cnt = 0;
 		spin_unlock_irq(&pring->ring_lock);
@@ -2643,7 +2643,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba
 }
 
 /**
- * lpfc_sli3_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
+ * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
  * @phba: pointer to lpfc hba data structure.
  * @pring: pointer to a IOCB ring.
  * @cnt: the number of IOCBs to be posted to the IOCB ring.
@@ -2655,7 +2655,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba
  *   The number of IOCBs NOT able to be posted to the IOCB ring.
  **/
 int
-lpfc_sli3_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
+lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
 {
 	IOCB_t *icmd;
 	struct lpfc_iocbq *iocb;
@@ -2761,7 +2761,7 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba)
 	struct lpfc_sli *psli = &phba->sli;
 
 	/* Ring 0, ELS / CT buffers */
-	lpfc_sli3_post_buffer(phba, &psli->sli3_ring[LPFC_ELS_RING], LPFC_BUF_RING0);
+	lpfc_post_buffer(phba, &psli->sli3_ring[LPFC_ELS_RING], LPFC_BUF_RING0);
 	/* Ring 2 - FCP no buffers needed */
 
 	return 0;
@@ -4215,7 +4215,8 @@ lpfc_io_buf_replenish(struct lpfc_hba *p
 			qp = &phba->sli4_hba.hdwq[idx];
 			lpfc_cmd->hdwq_no = idx;
 			lpfc_cmd->hdwq = qp;
-			lpfc_cmd->cur_iocbq.cmd_cmpl = NULL;
+			lpfc_cmd->cur_iocbq.wqe_cmpl = NULL;
+			lpfc_cmd->cur_iocbq.iocb_cmpl = NULL;
 			spin_lock(&qp->io_buf_list_put_lock);
 			list_add_tail(&lpfc_cmd->list,
 				      &qp->lpfc_io_buf_list_put);
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -2139,9 +2139,9 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vp
 	npr = NULL;
 	nvpr = NULL;
 	temp_ptr = lpfc_check_elscmpl_iocb(phba, cmdiocb, rspiocb);
-	if (cmdiocb->cmd_flag & LPFC_PRLI_FCP_REQ)
+	if (cmdiocb->iocb_flag & LPFC_PRLI_FCP_REQ)
 		npr = (PRLI *) temp_ptr;
-	else if (cmdiocb->cmd_flag & LPFC_PRLI_NVME_REQ)
+	else if (cmdiocb->iocb_flag & LPFC_PRLI_NVME_REQ)
 		nvpr = (struct lpfc_nvme_prli *) temp_ptr;
 
 	irsp = &rspiocb->iocb;
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -352,12 +352,11 @@ __lpfc_nvme_ls_req_cmp(struct lpfc_hba *
 
 static void
 lpfc_nvme_ls_req_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
-		     struct lpfc_iocbq *rspwqe)
+		       struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_vport *vport = cmdwqe->vport;
 	struct lpfc_nvme_lport *lport;
 	uint32_t status;
-	struct lpfc_wcqe_complete *wcqe = &rspwqe->wcqe_cmpl;
 
 	status = bf_get(lpfc_wcqe_c_status, wcqe) & LPFC_IOCB_STATUS_MASK;
 
@@ -381,7 +380,7 @@ lpfc_nvme_gen_req(struct lpfc_vport *vpo
 		  struct lpfc_dmabuf *inp,
 		  struct nvmefc_ls_req *pnvme_lsreq,
 		  void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
-			       struct lpfc_iocbq *),
+			       struct lpfc_wcqe_complete *),
 		  struct lpfc_nodelist *ndlp, uint32_t num_entry,
 		  uint32_t tmo, uint8_t retry)
 {
@@ -402,7 +401,7 @@ lpfc_nvme_gen_req(struct lpfc_vport *vpo
 	memset(wqe, 0, sizeof(union lpfc_wqe));
 
 	genwqe->context3 = (uint8_t *)bmp;
-	genwqe->cmd_flag |= LPFC_IO_NVME_LS;
+	genwqe->iocb_flag |= LPFC_IO_NVME_LS;
 
 	/* Save for completion so we can release these resources */
 	genwqe->context1 = lpfc_nlp_get(ndlp);
@@ -433,7 +432,7 @@ lpfc_nvme_gen_req(struct lpfc_vport *vpo
 			first_len = xmit_len;
 	}
 
-	genwqe->num_bdes = num_entry;
+	genwqe->rsvd2 = num_entry;
 	genwqe->hba_wqidx = 0;
 
 	/* Words 0 - 2 */
@@ -484,7 +483,8 @@ lpfc_nvme_gen_req(struct lpfc_vport *vpo
 
 
 	/* Issue GEN REQ WQE for NPORT <did> */
-	genwqe->cmd_cmpl = cmpl;
+	genwqe->wqe_cmpl = cmpl;
+	genwqe->iocb_cmpl = NULL;
 	genwqe->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT;
 	genwqe->vport = vport;
 	genwqe->retry = retry;
@@ -534,7 +534,7 @@ __lpfc_nvme_ls_req(struct lpfc_vport *vp
 		      struct nvmefc_ls_req *pnvme_lsreq,
 		      void (*gen_req_cmp)(struct lpfc_hba *phba,
 				struct lpfc_iocbq *cmdwqe,
-				struct lpfc_iocbq *rspwqe))
+				struct lpfc_wcqe_complete *wcqe))
 {
 	struct lpfc_dmabuf *bmp;
 	struct ulp_bde64 *bpl;
@@ -722,7 +722,7 @@ __lpfc_nvme_ls_abort(struct lpfc_vport *
 	spin_lock(&pring->ring_lock);
 	list_for_each_entry_safe(wqe, next_wqe, &pring->txcmplq, list) {
 		if (wqe->context2 == pnvme_lsreq) {
-			wqe->cmd_flag |= LPFC_DRIVER_ABORTED;
+			wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
 			foundit = true;
 			break;
 		}
@@ -906,7 +906,7 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport
 
 
 /*
- * lpfc_nvme_io_cmd_cmpl - Complete an NVME-over-FCP IO
+ * lpfc_nvme_io_cmd_wqe_cmpl - Complete an NVME-over-FCP IO
  *
  * Driver registers this routine as it io request handler.  This
  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
@@ -917,12 +917,11 @@ lpfc_nvme_adj_fcp_sgls(struct lpfc_vport
  *   TODO: What are the failure codes.
  **/
 static void
-lpfc_nvme_io_cmd_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
-		      struct lpfc_iocbq *pwqeOut)
+lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
+			  struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_io_buf *lpfc_ncmd =
 		(struct lpfc_io_buf *)pwqeIn->context1;
-	struct lpfc_wcqe_complete *wcqe = &pwqeOut->wcqe_cmpl;
 	struct lpfc_vport *vport = pwqeIn->vport;
 	struct nvmefc_fcp_req *nCmd;
 	struct nvme_fc_ersp_iu *ep;
@@ -1874,7 +1873,7 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local
 	}
 
 	/* Don't abort IOs no longer on the pending queue. */
-	if (!(nvmereq_wqe->cmd_flag & LPFC_IO_ON_TXCMPLQ)) {
+	if (!(nvmereq_wqe->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
 				 "6142 NVME IO req x%px not queued - skipping "
 				 "abort req xri x%x\n",
@@ -1888,7 +1887,7 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local
 			 nvmereq_wqe->hba_wqidx, pnvme_rport->port_id);
 
 	/* Outstanding abort is in progress */
-	if (nvmereq_wqe->cmd_flag & LPFC_DRIVER_ABORTED) {
+	if (nvmereq_wqe->iocb_flag & LPFC_DRIVER_ABORTED) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
 				 "6144 Outstanding NVME I/O Abort Request "
 				 "still pending on nvme_fcreq x%px, "
@@ -1983,8 +1982,8 @@ lpfc_get_nvme_buf(struct lpfc_hba *phba,
 		/* Setup key fields in buffer that may have been changed
 		 * if other protocols used this buffer.
 		 */
-		pwqeq->cmd_flag = LPFC_IO_NVME;
-		pwqeq->cmd_cmpl = lpfc_nvme_io_cmd_cmpl;
+		pwqeq->iocb_flag = LPFC_IO_NVME;
+		pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl;
 		lpfc_ncmd->start_time = jiffies;
 		lpfc_ncmd->flags = 0;
 
@@ -2750,7 +2749,6 @@ lpfc_nvme_cancel_iocb(struct lpfc_hba *p
 	if (phba->sli.sli_flag & LPFC_SLI_ACTIVE)
 		bf_set(lpfc_wcqe_c_xb, wcqep, 1);
 
-	memcpy(&pwqeIn->wcqe_cmpl, wcqep, sizeof(*wcqep));
-	(pwqeIn->cmd_cmpl)(phba, pwqeIn, pwqeIn);
+	(pwqeIn->wqe_cmpl)(phba, pwqeIn, wcqep);
 #endif
 }
--- a/drivers/scsi/lpfc/lpfc_nvme.h
+++ b/drivers/scsi/lpfc/lpfc_nvme.h
@@ -234,7 +234,7 @@ int __lpfc_nvme_ls_req(struct lpfc_vport
 		struct nvmefc_ls_req *pnvme_lsreq,
 		void (*gen_req_cmp)(struct lpfc_hba *phba,
 				struct lpfc_iocbq *cmdwqe,
-				struct lpfc_iocbq *rspwqe));
+				struct lpfc_wcqe_complete *wcqe));
 void __lpfc_nvme_ls_req_cmp(struct lpfc_hba *phba,  struct lpfc_vport *vport,
 		struct lpfc_iocbq *cmdwqe, struct lpfc_wcqe_complete *wcqe);
 int __lpfc_nvme_ls_abort(struct lpfc_vport *vport,
@@ -248,6 +248,6 @@ int __lpfc_nvme_xmt_ls_rsp(struct lpfc_a
 			struct nvmefc_ls_rsp *ls_rsp,
 			void (*xmt_ls_rsp_cmp)(struct lpfc_hba *phba,
 				struct lpfc_iocbq *cmdwqe,
-				struct lpfc_iocbq *rspwqe));
+				struct lpfc_wcqe_complete *wcqe));
 void __lpfc_nvme_xmt_ls_rsp_cmp(struct lpfc_hba *phba,
-		struct lpfc_iocbq *cmdwqe, struct lpfc_iocbq *rspwqe);
+		struct lpfc_iocbq *cmdwqe, struct lpfc_wcqe_complete *wcqe);
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -285,7 +285,7 @@ lpfc_nvmet_defer_release(struct lpfc_hba
  *         transmission of an NVME LS response.
  * @phba: Pointer to HBA context object.
  * @cmdwqe: Pointer to driver command WQE object.
- * @rspwqe: Pointer to driver response WQE object.
+ * @wcqe: Pointer to driver response CQE object.
  *
  * The function is called from SLI ring event handler with no
  * lock held. The function frees memory resources used for the command
@@ -293,10 +293,9 @@ lpfc_nvmet_defer_release(struct lpfc_hba
  **/
 void
 __lpfc_nvme_xmt_ls_rsp_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
-			   struct lpfc_iocbq *rspwqe)
+			   struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_async_xchg_ctx *axchg = cmdwqe->context2;
-	struct lpfc_wcqe_complete *wcqe = &rspwqe->wcqe_cmpl;
 	struct nvmefc_ls_rsp *ls_rsp = &axchg->ls_rsp;
 	uint32_t status, result;
 
@@ -332,7 +331,7 @@ __lpfc_nvme_xmt_ls_rsp_cmp(struct lpfc_h
  * lpfc_nvmet_xmt_ls_rsp_cmp - Completion handler for LS Response
  * @phba: Pointer to HBA context object.
  * @cmdwqe: Pointer to driver command WQE object.
- * @rspwqe: Pointer to driver response WQE object.
+ * @wcqe: Pointer to driver response CQE object.
  *
  * The function is called from SLI ring event handler with no
  * lock held. This function is the completion handler for NVME LS commands
@@ -341,11 +340,10 @@ __lpfc_nvme_xmt_ls_rsp_cmp(struct lpfc_h
  **/
 static void
 lpfc_nvmet_xmt_ls_rsp_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
-			  struct lpfc_iocbq *rspwqe)
+			  struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_nvmet_tgtport *tgtp;
 	uint32_t status, result;
-	struct lpfc_wcqe_complete *wcqe = &rspwqe->wcqe_cmpl;
 
 	if (!phba->targetport)
 		goto finish;
@@ -367,7 +365,7 @@ lpfc_nvmet_xmt_ls_rsp_cmp(struct lpfc_hb
 	}
 
 finish:
-	__lpfc_nvme_xmt_ls_rsp_cmp(phba, cmdwqe, rspwqe);
+	__lpfc_nvme_xmt_ls_rsp_cmp(phba, cmdwqe, wcqe);
 }
 
 /**
@@ -709,7 +707,7 @@ out:
  * lpfc_nvmet_xmt_fcp_op_cmp - Completion handler for FCP Response
  * @phba: Pointer to HBA context object.
  * @cmdwqe: Pointer to driver command WQE object.
- * @rspwqe: Pointer to driver response WQE object.
+ * @wcqe: Pointer to driver response CQE object.
  *
  * The function is called from SLI ring event handler with no
  * lock held. This function is the completion handler for NVME FCP commands
@@ -717,13 +715,12 @@ out:
  **/
 static void
 lpfc_nvmet_xmt_fcp_op_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
-			  struct lpfc_iocbq *rspwqe)
+			  struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_nvmet_tgtport *tgtp;
 	struct nvmefc_tgt_fcp_req *rsp;
 	struct lpfc_async_xchg_ctx *ctxp;
 	uint32_t status, result, op, start_clean, logerr;
-	struct lpfc_wcqe_complete *wcqe = &rspwqe->wcqe_cmpl;
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	int id;
 #endif
@@ -820,7 +817,7 @@ lpfc_nvmet_xmt_fcp_op_cmp(struct lpfc_hb
 		/* lpfc_nvmet_xmt_fcp_release() will recycle the context */
 	} else {
 		ctxp->entry_cnt++;
-		start_clean = offsetof(struct lpfc_iocbq, cmd_flag);
+		start_clean = offsetof(struct lpfc_iocbq, iocb_flag);
 		memset(((char *)cmdwqe) + start_clean, 0,
 		       (sizeof(struct lpfc_iocbq) - start_clean));
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
@@ -865,7 +862,7 @@ __lpfc_nvme_xmt_ls_rsp(struct lpfc_async
 			struct nvmefc_ls_rsp *ls_rsp,
 			void (*xmt_ls_rsp_cmp)(struct lpfc_hba *phba,
 				struct lpfc_iocbq *cmdwqe,
-				struct lpfc_iocbq *rspwqe))
+				struct lpfc_wcqe_complete *wcqe))
 {
 	struct lpfc_hba *phba = axchg->phba;
 	struct hbq_dmabuf *nvmebuf = (struct hbq_dmabuf *)axchg->rqb_buffer;
@@ -901,7 +898,7 @@ __lpfc_nvme_xmt_ls_rsp(struct lpfc_async
 	}
 
 	/* Save numBdes for bpl2sgl */
-	nvmewqeq->num_bdes = 1;
+	nvmewqeq->rsvd2 = 1;
 	nvmewqeq->hba_wqidx = 0;
 	nvmewqeq->context3 = &dmabuf;
 	dmabuf.virt = &bpl;
@@ -916,7 +913,8 @@ __lpfc_nvme_xmt_ls_rsp(struct lpfc_async
 	 * be referenced after it returns back to this routine.
 	 */
 
-	nvmewqeq->cmd_cmpl = xmt_ls_rsp_cmp;
+	nvmewqeq->wqe_cmpl = xmt_ls_rsp_cmp;
+	nvmewqeq->iocb_cmpl = NULL;
 	nvmewqeq->context2 = axchg;
 
 	lpfc_nvmeio_data(phba, "NVMEx LS RSP: xri x%x wqidx x%x len x%x\n",
@@ -1074,9 +1072,10 @@ lpfc_nvmet_xmt_fcp_op(struct nvmet_fc_ta
 		goto aerr;
 	}
 
-	nvmewqeq->cmd_cmpl = lpfc_nvmet_xmt_fcp_op_cmp;
+	nvmewqeq->wqe_cmpl = lpfc_nvmet_xmt_fcp_op_cmp;
+	nvmewqeq->iocb_cmpl = NULL;
 	nvmewqeq->context2 = ctxp;
-	nvmewqeq->cmd_flag |=  LPFC_IO_NVMET;
+	nvmewqeq->iocb_flag |=  LPFC_IO_NVMET;
 	ctxp->wqeq->hba_wqidx = rsp->hwqid;
 
 	lpfc_nvmeio_data(phba, "NVMET FCP CMND: xri x%x op x%x len x%x\n",
@@ -1276,7 +1275,7 @@ lpfc_nvmet_defer_rcv(struct nvmet_fc_tar
  * lpfc_nvmet_ls_req_cmp - completion handler for a nvme ls request
  * @phba: Pointer to HBA context object
  * @cmdwqe: Pointer to driver command WQE object.
- * @rspwqe: Pointer to driver response WQE object.
+ * @wcqe: Pointer to driver response CQE object.
  *
  * This function is the completion handler for NVME LS requests.
  * The function updates any states and statistics, then calls the
@@ -1284,9 +1283,8 @@ lpfc_nvmet_defer_rcv(struct nvmet_fc_tar
  **/
 static void
 lpfc_nvmet_ls_req_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
-		      struct lpfc_iocbq *rspwqe)
+		       struct lpfc_wcqe_complete *wcqe)
 {
-	struct lpfc_wcqe_complete *wcqe = &rspwqe->wcqe_cmpl;
 	__lpfc_nvme_ls_req_cmp(phba, cmdwqe->vport, cmdwqe, wcqe);
 }
 
@@ -1583,7 +1581,7 @@ lpfc_nvmet_setup_io_context(struct lpfc_
 					"6406 Ran out of NVMET iocb/WQEs\n");
 			return -ENOMEM;
 		}
-		ctx_buf->iocbq->cmd_flag = LPFC_IO_NVMET;
+		ctx_buf->iocbq->iocb_flag = LPFC_IO_NVMET;
 		nvmewqe = ctx_buf->iocbq;
 		wqe = &nvmewqe->wqe;
 
@@ -2029,10 +2027,8 @@ lpfc_nvmet_wqfull_flush(struct lpfc_hba
 				list_del(&nvmewqeq->list);
 				spin_unlock_irqrestore(&pring->ring_lock,
 						       iflags);
-				memcpy(&nvmewqeq->wcqe_cmpl, wcqep,
-				       sizeof(*wcqep));
 				lpfc_nvmet_xmt_fcp_op_cmp(phba, nvmewqeq,
-							  nvmewqeq);
+							  wcqep);
 				return;
 			}
 			continue;
@@ -2040,8 +2036,7 @@ lpfc_nvmet_wqfull_flush(struct lpfc_hba
 			/* Flush all IOs */
 			list_del(&nvmewqeq->list);
 			spin_unlock_irqrestore(&pring->ring_lock, iflags);
-			memcpy(&nvmewqeq->wcqe_cmpl, wcqep, sizeof(*wcqep));
-			lpfc_nvmet_xmt_fcp_op_cmp(phba, nvmewqeq, nvmewqeq);
+			lpfc_nvmet_xmt_fcp_op_cmp(phba, nvmewqeq, wcqep);
 			spin_lock_irqsave(&pring->ring_lock, iflags);
 		}
 	}
@@ -2681,7 +2676,7 @@ lpfc_nvmet_prep_ls_wqe(struct lpfc_hba *
 	nvmewqe->retry = 1;
 	nvmewqe->vport = phba->pport;
 	nvmewqe->drvrTimeout = (phba->fc_ratov * 3) + LPFC_DRVR_TIMEOUT;
-	nvmewqe->cmd_flag |= LPFC_IO_NVME_LS;
+	nvmewqe->iocb_flag |= LPFC_IO_NVME_LS;
 
 	/* Xmit NVMET response to remote NPORT <did> */
 	lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC,
@@ -3038,7 +3033,7 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba
  * lpfc_nvmet_sol_fcp_abort_cmp - Completion handler for ABTS
  * @phba: Pointer to HBA context object.
  * @cmdwqe: Pointer to driver command WQE object.
- * @rspwqe: Pointer to driver response WQE object.
+ * @wcqe: Pointer to driver response CQE object.
  *
  * The function is called from SLI ring event handler with no
  * lock held. This function is the completion handler for NVME ABTS for FCP cmds
@@ -3046,14 +3041,13 @@ lpfc_nvmet_prep_fcp_wqe(struct lpfc_hba
  **/
 static void
 lpfc_nvmet_sol_fcp_abort_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
-			     struct lpfc_iocbq *rspwqe)
+			     struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_async_xchg_ctx *ctxp;
 	struct lpfc_nvmet_tgtport *tgtp;
 	uint32_t result;
 	unsigned long flags;
 	bool released = false;
-	struct lpfc_wcqe_complete *wcqe = &rspwqe->wcqe_cmpl;
 
 	ctxp = cmdwqe->context2;
 	result = wcqe->parameter;
@@ -3108,7 +3102,7 @@ lpfc_nvmet_sol_fcp_abort_cmp(struct lpfc
  * lpfc_nvmet_unsol_fcp_abort_cmp - Completion handler for ABTS
  * @phba: Pointer to HBA context object.
  * @cmdwqe: Pointer to driver command WQE object.
- * @rspwqe: Pointer to driver response WQE object.
+ * @wcqe: Pointer to driver response CQE object.
  *
  * The function is called from SLI ring event handler with no
  * lock held. This function is the completion handler for NVME ABTS for FCP cmds
@@ -3116,14 +3110,13 @@ lpfc_nvmet_sol_fcp_abort_cmp(struct lpfc
  **/
 static void
 lpfc_nvmet_unsol_fcp_abort_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
-			       struct lpfc_iocbq *rspwqe)
+			       struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_async_xchg_ctx *ctxp;
 	struct lpfc_nvmet_tgtport *tgtp;
 	unsigned long flags;
 	uint32_t result;
 	bool released = false;
-	struct lpfc_wcqe_complete *wcqe = &rspwqe->wcqe_cmpl;
 
 	ctxp = cmdwqe->context2;
 	result = wcqe->parameter;
@@ -3190,7 +3183,7 @@ lpfc_nvmet_unsol_fcp_abort_cmp(struct lp
  * lpfc_nvmet_xmt_ls_abort_cmp - Completion handler for ABTS
  * @phba: Pointer to HBA context object.
  * @cmdwqe: Pointer to driver command WQE object.
- * @rspwqe: Pointer to driver response WQE object.
+ * @wcqe: Pointer to driver response CQE object.
  *
  * The function is called from SLI ring event handler with no
  * lock held. This function is the completion handler for NVME ABTS for LS cmds
@@ -3198,12 +3191,11 @@ lpfc_nvmet_unsol_fcp_abort_cmp(struct lp
  **/
 static void
 lpfc_nvmet_xmt_ls_abort_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
-			    struct lpfc_iocbq *rspwqe)
+			    struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_async_xchg_ctx *ctxp;
 	struct lpfc_nvmet_tgtport *tgtp;
 	uint32_t result;
-	struct lpfc_wcqe_complete *wcqe = &rspwqe->wcqe_cmpl;
 
 	ctxp = cmdwqe->context2;
 	result = wcqe->parameter;
@@ -3327,7 +3319,7 @@ lpfc_nvmet_unsol_issue_abort(struct lpfc
 	abts_wqeq->context1 = ndlp;
 	abts_wqeq->context2 = ctxp;
 	abts_wqeq->context3 = NULL;
-	abts_wqeq->num_bdes = 0;
+	abts_wqeq->rsvd2 = 0;
 	/* hba_wqidx should already be setup from command we are aborting */
 	abts_wqeq->iocb.ulpCommand = CMD_XMIT_SEQUENCE64_CR;
 	abts_wqeq->iocb.ulpLe = 1;
@@ -3456,7 +3448,7 @@ lpfc_nvmet_sol_fcp_issue_abort(struct lp
 	}
 
 	/* Outstanding abort is in progress */
-	if (abts_wqeq->cmd_flag & LPFC_DRIVER_ABORTED) {
+	if (abts_wqeq->iocb_flag & LPFC_DRIVER_ABORTED) {
 		spin_unlock_irqrestore(&phba->hbalock, flags);
 		atomic_inc(&tgtp->xmt_abort_rsp_error);
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
@@ -3471,14 +3463,15 @@ lpfc_nvmet_sol_fcp_issue_abort(struct lp
 	}
 
 	/* Ready - mark outstanding as aborted by driver. */
-	abts_wqeq->cmd_flag |= LPFC_DRIVER_ABORTED;
+	abts_wqeq->iocb_flag |= LPFC_DRIVER_ABORTED;
 
 	lpfc_nvmet_prep_abort_wqe(abts_wqeq, ctxp->wqeq->sli4_xritag, opt);
 
 	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
 	abts_wqeq->hba_wqidx = ctxp->wqeq->hba_wqidx;
-	abts_wqeq->cmd_cmpl = lpfc_nvmet_sol_fcp_abort_cmp;
-	abts_wqeq->cmd_flag |= LPFC_IO_NVME;
+	abts_wqeq->wqe_cmpl = lpfc_nvmet_sol_fcp_abort_cmp;
+	abts_wqeq->iocb_cmpl = NULL;
+	abts_wqeq->iocb_flag |= LPFC_IO_NVME;
 	abts_wqeq->context2 = ctxp;
 	abts_wqeq->vport = phba->pport;
 	if (!ctxp->hdwq)
@@ -3535,8 +3528,9 @@ lpfc_nvmet_unsol_fcp_issue_abort(struct
 
 	spin_lock_irqsave(&phba->hbalock, flags);
 	abts_wqeq = ctxp->wqeq;
-	abts_wqeq->cmd_cmpl = lpfc_nvmet_unsol_fcp_abort_cmp;
-	abts_wqeq->cmd_flag |= LPFC_IO_NVMET;
+	abts_wqeq->wqe_cmpl = lpfc_nvmet_unsol_fcp_abort_cmp;
+	abts_wqeq->iocb_cmpl = NULL;
+	abts_wqeq->iocb_flag |= LPFC_IO_NVMET;
 	if (!ctxp->hdwq)
 		ctxp->hdwq = &phba->sli4_hba.hdwq[abts_wqeq->hba_wqidx];
 
@@ -3620,8 +3614,9 @@ lpfc_nvme_unsol_ls_issue_abort(struct lp
 	}
 
 	spin_lock_irqsave(&phba->hbalock, flags);
-	abts_wqeq->cmd_cmpl = lpfc_nvmet_xmt_ls_abort_cmp;
-	abts_wqeq->cmd_flag |=  LPFC_IO_NVME_LS;
+	abts_wqeq->wqe_cmpl = lpfc_nvmet_xmt_ls_abort_cmp;
+	abts_wqeq->iocb_cmpl = NULL;
+	abts_wqeq->iocb_flag |=  LPFC_IO_NVME_LS;
 	rc = lpfc_sli4_issue_wqe(phba, ctxp->hdwq, abts_wqeq);
 	spin_unlock_irqrestore(&phba->hbalock, flags);
 	if (rc == WQE_SUCCESS) {
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -362,7 +362,7 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *
 			kfree(psb);
 			break;
 		}
-		psb->cur_iocbq.cmd_flag |= LPFC_IO_FCP;
+		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
 
 		psb->fcp_cmnd = psb->data;
 		psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
@@ -468,7 +468,7 @@ lpfc_sli4_vport_delete_fcp_xri_aborted(s
 		spin_lock(&qp->abts_io_buf_list_lock);
 		list_for_each_entry_safe(psb, next_psb,
 					 &qp->lpfc_abts_io_buf_list, list) {
-			if (psb->cur_iocbq.cmd_flag & LPFC_IO_NVME)
+			if (psb->cur_iocbq.iocb_flag & LPFC_IO_NVME)
 				continue;
 
 			if (psb->rdata && psb->rdata->pnode &&
@@ -524,7 +524,7 @@ lpfc_sli4_io_xri_aborted(struct lpfc_hba
 			list_del_init(&psb->list);
 			psb->flags &= ~LPFC_SBUF_XBUSY;
 			psb->status = IOSTAT_SUCCESS;
-			if (psb->cur_iocbq.cmd_flag & LPFC_IO_NVME) {
+			if (psb->cur_iocbq.iocb_flag & LPFC_IO_NVME) {
 				qp->abts_nvme_io_bufs--;
 				spin_unlock(&qp->abts_io_buf_list_lock);
 				spin_unlock_irqrestore(&phba->hbalock, iflag);
@@ -571,7 +571,7 @@ lpfc_sli4_io_xri_aborted(struct lpfc_hba
 				 * for command completion wake up the thread.
 				 */
 				spin_lock_irqsave(&psb->buf_lock, iflag);
-				psb->cur_iocbq.cmd_flag &=
+				psb->cur_iocbq.iocb_flag &=
 					~LPFC_DRIVER_ABORTED;
 				if (psb->waitq)
 					wake_up(psb->waitq);
@@ -593,8 +593,8 @@ lpfc_sli4_io_xri_aborted(struct lpfc_hba
 		for (i = 1; i <= phba->sli.last_iotag; i++) {
 			iocbq = phba->sli.iocbq_lookup[i];
 
-			if (!(iocbq->cmd_flag & LPFC_IO_FCP) ||
-			    (iocbq->cmd_flag & LPFC_IO_LIBDFC))
+			if (!(iocbq->iocb_flag & LPFC_IO_FCP) ||
+			    (iocbq->iocb_flag & LPFC_IO_LIBDFC))
 				continue;
 			if (iocbq->sli4_xritag != xri)
 				continue;
@@ -695,7 +695,7 @@ lpfc_get_scsi_buf_s4(struct lpfc_hba *ph
 	/* Setup key fields in buffer that may have been changed
 	 * if other protocols used this buffer.
 	 */
-	lpfc_cmd->cur_iocbq.cmd_flag = LPFC_IO_FCP;
+	lpfc_cmd->cur_iocbq.iocb_flag = LPFC_IO_FCP;
 	lpfc_cmd->prot_seg_cnt = 0;
 	lpfc_cmd->seg_cnt = 0;
 	lpfc_cmd->timeout = 0;
@@ -783,7 +783,7 @@ lpfc_release_scsi_buf_s3(struct lpfc_hba
 
 	spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
 	psb->pCmd = NULL;
-	psb->cur_iocbq.cmd_flag = LPFC_IO_FCP;
+	psb->cur_iocbq.iocb_flag = LPFC_IO_FCP;
 	list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put);
 	spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
 }
@@ -931,7 +931,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hb
 			physaddr = sg_dma_address(sgel);
 			if (phba->sli_rev == 3 &&
 			    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
-			    !(iocbq->cmd_flag & DSS_SECURITY_OP) &&
+			    !(iocbq->iocb_flag & DSS_SECURITY_OP) &&
 			    nseg <= LPFC_EXT_DATA_BDE_COUNT) {
 				data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
 				data_bde->tus.f.bdeSize = sg_dma_len(sgel);
@@ -959,7 +959,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hb
 	 */
 	if (phba->sli_rev == 3 &&
 	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
-	    !(iocbq->cmd_flag & DSS_SECURITY_OP)) {
+	    !(iocbq->iocb_flag & DSS_SECURITY_OP)) {
 		if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
 			/*
 			 * The extended IOCB format can only fit 3 BDE or a BPL.
@@ -3434,7 +3434,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hb
 	 */
 	if ((phba->cfg_fof) && ((struct lpfc_device_data *)
 		scsi_cmnd->device->hostdata)->oas_enabled) {
-		lpfc_cmd->cur_iocbq.cmd_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
+		lpfc_cmd->cur_iocbq.iocb_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
 		lpfc_cmd->cur_iocbq.priority = ((struct lpfc_device_data *)
 			scsi_cmnd->device->hostdata)->priority;
 
@@ -3591,15 +3591,15 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc
 	switch (scsi_get_prot_op(scsi_cmnd)) {
 	case SCSI_PROT_WRITE_STRIP:
 	case SCSI_PROT_READ_STRIP:
-		lpfc_cmd->cur_iocbq.cmd_flag |= LPFC_IO_DIF_STRIP;
+		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_STRIP;
 		break;
 	case SCSI_PROT_WRITE_INSERT:
 	case SCSI_PROT_READ_INSERT:
-		lpfc_cmd->cur_iocbq.cmd_flag |= LPFC_IO_DIF_INSERT;
+		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_INSERT;
 		break;
 	case SCSI_PROT_WRITE_PASS:
 	case SCSI_PROT_READ_PASS:
-		lpfc_cmd->cur_iocbq.cmd_flag |= LPFC_IO_DIF_PASS;
+		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_PASS;
 		break;
 	}
 
@@ -3630,7 +3630,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc
 	 */
 	if ((phba->cfg_fof) && ((struct lpfc_device_data *)
 		scsi_cmnd->device->hostdata)->oas_enabled) {
-		lpfc_cmd->cur_iocbq.cmd_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
+		lpfc_cmd->cur_iocbq.iocb_flag |= (LPFC_IO_OAS | LPFC_IO_FOF);
 
 		/* Word 10 */
 		bf_set(wqe_oas, &wqe->generic.wqe_com, 1);
@@ -3640,14 +3640,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc
 	}
 
 	/* Word 7. DIF Flags */
-	if (lpfc_cmd->cur_iocbq.cmd_flag & LPFC_IO_DIF_PASS)
+	if (lpfc_cmd->cur_iocbq.iocb_flag & LPFC_IO_DIF_PASS)
 		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_PASSTHRU);
-	else if (lpfc_cmd->cur_iocbq.cmd_flag & LPFC_IO_DIF_STRIP)
+	else if (lpfc_cmd->cur_iocbq.iocb_flag & LPFC_IO_DIF_STRIP)
 		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_STRIP);
-	else if (lpfc_cmd->cur_iocbq.cmd_flag & LPFC_IO_DIF_INSERT)
+	else if (lpfc_cmd->cur_iocbq.iocb_flag & LPFC_IO_DIF_INSERT)
 		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_INSERT);
 
-	lpfc_cmd->cur_iocbq.cmd_flag &= ~(LPFC_IO_DIF_PASS |
+	lpfc_cmd->cur_iocbq.iocb_flag &= ~(LPFC_IO_DIF_PASS |
 				 LPFC_IO_DIF_STRIP | LPFC_IO_DIF_INSERT);
 
 	return 0;
@@ -4172,7 +4172,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *v
  * lpfc_fcp_io_cmd_wqe_cmpl - Complete a FCP IO
  * @phba: The hba for which this call is being executed.
  * @pwqeIn: The command WQE for the scsi cmnd.
- * @pwqeOut: Pointer to driver response WQE object.
+ * @wcqe: Pointer to driver response CQE object.
  *
  * This routine assigns scsi command result by looking into response WQE
  * status field appropriately. This routine handles QUEUE FULL condition as
@@ -4180,11 +4180,10 @@ lpfc_handle_fcp_err(struct lpfc_vport *v
  **/
 static void
 lpfc_fcp_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
-			 struct lpfc_iocbq *pwqeOut)
+			 struct lpfc_wcqe_complete *wcqe)
 {
 	struct lpfc_io_buf *lpfc_cmd =
 		(struct lpfc_io_buf *)pwqeIn->context1;
-	struct lpfc_wcqe_complete *wcqe = &pwqeOut->wcqe_cmpl;
 	struct lpfc_vport *vport = pwqeIn->vport;
 	struct lpfc_rport_data *rdata;
 	struct lpfc_nodelist *ndlp;
@@ -4217,7 +4216,7 @@ lpfc_fcp_io_cmd_wqe_cmpl(struct lpfc_hba
 		 * This needs to be done outside buf_lock
 		 */
 		spin_lock_irqsave(&phba->hbalock, iflags);
-		lpfc_cmd->cur_iocbq.cmd_flag |= LPFC_EXCHANGE_BUSY;
+		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_EXCHANGE_BUSY;
 		spin_unlock_irqrestore(&phba->hbalock, iflags);
 	}
 
@@ -4508,7 +4507,7 @@ lpfc_fcp_io_cmd_wqe_cmpl(struct lpfc_hba
 	 * wake up the thread.
 	 */
 	spin_lock(&lpfc_cmd->buf_lock);
-	lpfc_cmd->cur_iocbq.cmd_flag &= ~LPFC_DRIVER_ABORTED;
+	lpfc_cmd->cur_iocbq.iocb_flag &= ~LPFC_DRIVER_ABORTED;
 	if (lpfc_cmd->waitq)
 		wake_up(lpfc_cmd->waitq);
 	spin_unlock(&lpfc_cmd->buf_lock);
@@ -4568,7 +4567,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba
 	lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
 	/* pick up SLI4 exchange busy status from HBA */
 	lpfc_cmd->flags &= ~LPFC_SBUF_XBUSY;
-	if (pIocbOut->cmd_flag & LPFC_EXCHANGE_BUSY)
+	if (pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY)
 		lpfc_cmd->flags |= LPFC_SBUF_XBUSY;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
@@ -4777,7 +4776,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba
 	 * wake up the thread.
 	 */
 	spin_lock(&lpfc_cmd->buf_lock);
-	lpfc_cmd->cur_iocbq.cmd_flag &= ~LPFC_DRIVER_ABORTED;
+	lpfc_cmd->cur_iocbq.iocb_flag &= ~LPFC_DRIVER_ABORTED;
 	if (lpfc_cmd->waitq)
 		wake_up(lpfc_cmd->waitq);
 	spin_unlock(&lpfc_cmd->buf_lock);
@@ -4855,8 +4854,8 @@ static int lpfc_scsi_prep_cmnd_buf_s3(st
 
 	piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
 	piocbq->context1  = lpfc_cmd;
-	if (!piocbq->cmd_cmpl)
-		piocbq->cmd_cmpl = lpfc_scsi_cmd_iocb_cmpl;
+	if (!piocbq->iocb_cmpl)
+		piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
 	piocbq->iocb.ulpTimeout = tmo;
 	piocbq->vport = vport;
 	return 0;
@@ -4969,7 +4968,7 @@ static int lpfc_scsi_prep_cmnd_buf_s4(st
 	pwqeq->vport = vport;
 	pwqeq->context1 = lpfc_cmd;
 	pwqeq->hba_wqidx = lpfc_cmd->hdwq_no;
-	pwqeq->cmd_cmpl = lpfc_fcp_io_cmd_wqe_cmpl;
+	pwqeq->wqe_cmpl = lpfc_fcp_io_cmd_wqe_cmpl;
 
 	return 0;
 }
@@ -5691,7 +5690,7 @@ lpfc_queuecommand(struct Scsi_Host *shos
 	lpfc_cmd->pCmd  = cmnd;
 	lpfc_cmd->rdata = rdata;
 	lpfc_cmd->ndlp = ndlp;
-	lpfc_cmd->cur_iocbq.cmd_cmpl = NULL;
+	lpfc_cmd->cur_iocbq.iocb_cmpl = NULL;
 	cmnd->host_scribble = (unsigned char *)lpfc_cmd;
 
 	err = lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
@@ -5748,7 +5747,7 @@ lpfc_queuecommand(struct Scsi_Host *shos
 				(union lpfc_vmid_io_tag *)
 					&lpfc_cmd->cur_iocbq.vmid_tag);
 			if (!err)
-				lpfc_cmd->cur_iocbq.cmd_flag |= LPFC_IO_VMID;
+				lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_VMID;
 		}
 	}
 
@@ -5935,7 +5934,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmn
 		spin_lock(&pring_s4->ring_lock);
 	}
 	/* the command is in process of being cancelled */
-	if (!(iocb->cmd_flag & LPFC_IO_ON_TXCMPLQ)) {
+	if (!(iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			"3169 SCSI Layer abort requested I/O has been "
 			"cancelled by LLD.\n");
@@ -5958,7 +5957,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmn
 	BUG_ON(iocb->context1 != lpfc_cmd);
 
 	/* abort issued in recovery is still in progress */
-	if (iocb->cmd_flag & LPFC_DRIVER_ABORTED) {
+	if (iocb->iocb_flag & LPFC_DRIVER_ABORTED) {
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			 "3389 SCSI Layer I/O Abort Request is pending\n");
 		if (phba->sli_rev == LPFC_SLI_REV4)
@@ -5999,7 +5998,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmn
 
 wait_for_cmpl:
 	/*
-	 * cmd_flag is set to LPFC_DRIVER_ABORTED before we wait
+	 * iocb_flag is set to LPFC_DRIVER_ABORTED before we wait
 	 * for abort to complete.
 	 */
 	wait_event_timeout(waitq,
@@ -6187,14 +6186,14 @@ lpfc_send_taskmgmt(struct lpfc_vport *vp
 		lpfc_release_scsi_buf(phba, lpfc_cmd);
 		return FAILED;
 	}
-	iocbq->cmd_cmpl = lpfc_tskmgmt_def_cmpl;
+	iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
 
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
 			 "0702 Issue %s to TGT %d LUN %llu "
 			 "rpi x%x nlp_flag x%x Data: x%x x%x\n",
 			 lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id,
 			 pnode->nlp_rpi, pnode->nlp_flag, iocbq->sli4_xritag,
-			 iocbq->cmd_flag);
+			 iocbq->iocb_flag);
 
 	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
 					  iocbq, iocbqrsp, lpfc_cmd->timeout);
@@ -6204,12 +6203,12 @@ lpfc_send_taskmgmt(struct lpfc_vport *vp
 		    iocbqrsp->iocb.ulpStatus != IOSTAT_FCP_RSP_ERROR)
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
 					 "0727 TMF %s to TGT %d LUN %llu "
-					 "failed (%d, %d) cmd_flag x%x\n",
+					 "failed (%d, %d) iocb_flag x%x\n",
 					 lpfc_taskmgmt_name(task_mgmt_cmd),
 					 tgt_id, lun_id,
 					 iocbqrsp->iocb.ulpStatus,
 					 iocbqrsp->iocb.un.ulpWord[4],
-					 iocbq->cmd_flag);
+					 iocbq->iocb_flag);
 		/* if ulpStatus != IOCB_SUCCESS, then status == IOCB_SUCCESS */
 		if (status == IOCB_SUCCESS) {
 			if (iocbqrsp->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1254,21 +1254,21 @@ __lpfc_sli_get_els_sglq(struct lpfc_hba
 	struct lpfc_sli_ring *pring = NULL;
 	int found = 0;
 
-	if (piocbq->cmd_flag & LPFC_IO_NVME_LS)
+	if (piocbq->iocb_flag & LPFC_IO_NVME_LS)
 		pring =  phba->sli4_hba.nvmels_wq->pring;
 	else
 		pring = lpfc_phba_elsring(phba);
 
 	lockdep_assert_held(&pring->ring_lock);
 
-	if (piocbq->cmd_flag &  LPFC_IO_FCP) {
+	if (piocbq->iocb_flag &  LPFC_IO_FCP) {
 		lpfc_cmd = (struct lpfc_io_buf *) piocbq->context1;
 		ndlp = lpfc_cmd->rdata->pnode;
 	} else  if ((piocbq->iocb.ulpCommand == CMD_GEN_REQUEST64_CR) &&
-			!(piocbq->cmd_flag & LPFC_IO_LIBDFC)) {
+			!(piocbq->iocb_flag & LPFC_IO_LIBDFC)) {
 		ndlp = piocbq->context_un.ndlp;
-	} else  if (piocbq->cmd_flag & LPFC_IO_LIBDFC) {
-		if (piocbq->cmd_flag & LPFC_IO_LOOPBACK)
+	} else  if (piocbq->iocb_flag & LPFC_IO_LIBDFC) {
+		if (piocbq->iocb_flag & LPFC_IO_LOOPBACK)
 			ndlp = NULL;
 		else
 			ndlp = piocbq->context_un.ndlp;
@@ -1391,7 +1391,7 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_
 
 
 	if (sglq)  {
-		if (iocbq->cmd_flag & LPFC_IO_NVMET) {
+		if (iocbq->iocb_flag & LPFC_IO_NVMET) {
 			spin_lock_irqsave(&phba->sli4_hba.sgl_list_lock,
 					  iflag);
 			sglq->state = SGL_FREED;
@@ -1403,7 +1403,7 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_
 			goto out;
 		}
 
-		if ((iocbq->cmd_flag & LPFC_EXCHANGE_BUSY) &&
+		if ((iocbq->iocb_flag & LPFC_EXCHANGE_BUSY) &&
 		    (!(unlikely(pci_channel_offline(phba->pcidev)))) &&
 		    sglq->state != SGL_XRI_ABORTED) {
 			spin_lock_irqsave(&phba->sli4_hba.sgl_list_lock,
@@ -1440,7 +1440,7 @@ out:
 	memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
 	iocbq->sli4_lxritag = NO_XRI;
 	iocbq->sli4_xritag = NO_XRI;
-	iocbq->cmd_flag &= ~(LPFC_IO_NVME | LPFC_IO_NVMET | LPFC_IO_CMF |
+	iocbq->iocb_flag &= ~(LPFC_IO_NVME | LPFC_IO_NVMET | LPFC_IO_CMF |
 			      LPFC_IO_NVME_LS);
 	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
 }
@@ -1530,17 +1530,17 @@ lpfc_sli_cancel_iocbs(struct lpfc_hba *p
 
 	while (!list_empty(iocblist)) {
 		list_remove_head(iocblist, piocb, struct lpfc_iocbq, list);
-		if (piocb->cmd_cmpl) {
-			if (piocb->cmd_flag & LPFC_IO_NVME)
+		if (piocb->wqe_cmpl) {
+			if (piocb->iocb_flag & LPFC_IO_NVME)
 				lpfc_nvme_cancel_iocb(phba, piocb,
 						      ulpstatus, ulpWord4);
 			else
 				lpfc_sli_release_iocbq(phba, piocb);
 
-		} else if (piocb->cmd_cmpl) {
+		} else if (piocb->iocb_cmpl) {
 			piocb->iocb.ulpStatus = ulpstatus;
 			piocb->iocb.un.ulpWord[4] = ulpWord4;
-			(piocb->cmd_cmpl) (phba, piocb, piocb);
+			(piocb->iocb_cmpl) (phba, piocb, piocb);
 		} else {
 			lpfc_sli_release_iocbq(phba, piocb);
 		}
@@ -1732,7 +1732,7 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba
 	BUG_ON(!piocb);
 
 	list_add_tail(&piocb->list, &pring->txcmplq);
-	piocb->cmd_flag |= LPFC_IO_ON_TXCMPLQ;
+	piocb->iocb_flag |= LPFC_IO_ON_TXCMPLQ;
 	pring->txcmplq_cnt++;
 
 	if ((unlikely(pring->ringno == LPFC_ELS_RING)) &&
@@ -1773,7 +1773,7 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phb
  * lpfc_cmf_sync_cmpl - Process a CMF_SYNC_WQE cmpl
  * @phba: Pointer to HBA context object.
  * @cmdiocb: Pointer to driver command iocb object.
- * @rspiocb: Pointer to driver response iocb object.
+ * @cmf_cmpl: Pointer to completed WCQE.
  *
  * This routine will inform the driver of any BW adjustments we need
  * to make. These changes will be picked up during the next CMF
@@ -1782,11 +1782,10 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phb
  **/
 static void
 lpfc_cmf_sync_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
-		   struct lpfc_iocbq *rspiocb)
+		   struct lpfc_wcqe_complete *cmf_cmpl)
 {
 	union lpfc_wqe128 *wqe;
 	uint32_t status, info;
-	struct lpfc_wcqe_complete *wcqe = &rspiocb->wcqe_cmpl;
 	uint64_t bw, bwdif, slop;
 	uint64_t pcent, bwpcent;
 	int asig, afpin, sigcnt, fpincnt;
@@ -1794,22 +1793,22 @@ lpfc_cmf_sync_cmpl(struct lpfc_hba *phba
 	char *s;
 
 	/* First check for error */
-	status = bf_get(lpfc_wcqe_c_status, wcqe);
+	status = bf_get(lpfc_wcqe_c_status, cmf_cmpl);
 	if (status) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
 				"6211 CMF_SYNC_WQE Error "
 				"req_tag x%x status x%x hwstatus x%x "
 				"tdatap x%x parm x%x\n",
-				bf_get(lpfc_wcqe_c_request_tag, wcqe),
-				bf_get(lpfc_wcqe_c_status, wcqe),
-				bf_get(lpfc_wcqe_c_hw_status, wcqe),
-				wcqe->total_data_placed,
-				wcqe->parameter);
+				bf_get(lpfc_wcqe_c_request_tag, cmf_cmpl),
+				bf_get(lpfc_wcqe_c_status, cmf_cmpl),
+				bf_get(lpfc_wcqe_c_hw_status, cmf_cmpl),
+				cmf_cmpl->total_data_placed,
+				cmf_cmpl->parameter);
 		goto out;
 	}
 
 	/* Gather congestion information on a successful cmpl */
-	info = wcqe->parameter;
+	info = cmf_cmpl->parameter;
 	phba->cmf_active_info = info;
 
 	/* See if firmware info count is valid or has changed */
@@ -1818,15 +1817,15 @@ lpfc_cmf_sync_cmpl(struct lpfc_hba *phba
 	else
 		phba->cmf_info_per_interval = info;
 
-	tdp = bf_get(lpfc_wcqe_c_cmf_bw, wcqe);
-	cg = bf_get(lpfc_wcqe_c_cmf_cg, wcqe);
+	tdp = bf_get(lpfc_wcqe_c_cmf_bw, cmf_cmpl);
+	cg = bf_get(lpfc_wcqe_c_cmf_cg, cmf_cmpl);
 
 	/* Get BW requirement from firmware */
 	bw = (uint64_t)tdp * LPFC_CMF_BLK_SIZE;
 	if (!bw) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
 				"6212 CMF_SYNC_WQE x%x: NULL bw\n",
-				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+				bf_get(lpfc_wcqe_c_request_tag, cmf_cmpl));
 		goto out;
 	}
 
@@ -2000,13 +1999,14 @@ initpath:
 	bf_set(cmf_sync_cqid, &wqe->cmf_sync, LPFC_WQE_CQ_ID_DEFAULT);
 
 	sync_buf->vport = phba->pport;
-	sync_buf->cmd_cmpl = lpfc_cmf_sync_cmpl;
+	sync_buf->wqe_cmpl = lpfc_cmf_sync_cmpl;
+	sync_buf->iocb_cmpl = NULL;
 	sync_buf->context1 = NULL;
 	sync_buf->context2 = NULL;
 	sync_buf->context3 = NULL;
 	sync_buf->sli4_xritag = NO_XRI;
 
-	sync_buf->cmd_flag |= LPFC_IO_CMF;
+	sync_buf->iocb_flag |= LPFC_IO_CMF;
 	ret_val = lpfc_sli4_issue_wqe(phba, &phba->sli4_hba.hdwq[0], sync_buf);
 	if (ret_val) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
@@ -2175,7 +2175,7 @@ lpfc_sli_submit_iocb(struct lpfc_hba *ph
 	/*
 	 * Set up an iotag
 	 */
-	nextiocb->iocb.ulpIoTag = (nextiocb->cmd_cmpl) ? nextiocb->iotag : 0;
+	nextiocb->iocb.ulpIoTag = (nextiocb->iocb_cmpl) ? nextiocb->iotag : 0;
 
 
 	if (pring->ringno == LPFC_ELS_RING) {
@@ -2196,9 +2196,9 @@ lpfc_sli_submit_iocb(struct lpfc_hba *ph
 	/*
 	 * If there is no completion routine to call, we can release the
 	 * IOCB buffer back right now. For IOCBs, like QUE_RING_BUF,
-	 * that have no rsp ring completion, cmd_cmpl MUST be NULL.
+	 * that have no rsp ring completion, iocb_cmpl MUST be NULL.
 	 */
-	if (nextiocb->cmd_cmpl)
+	if (nextiocb->iocb_cmpl)
 		lpfc_sli_ringtxcmpl_put(phba, pring, nextiocb);
 	else
 		__lpfc_sli_release_iocbq(phba, nextiocb);
@@ -3566,10 +3566,10 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *p
 
 	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
 		cmd_iocb = phba->sli.iocbq_lookup[iotag];
-		if (cmd_iocb->cmd_flag & LPFC_IO_ON_TXCMPLQ) {
+		if (cmd_iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ) {
 			/* remove from txcmpl queue list */
 			list_del_init(&cmd_iocb->list);
-			cmd_iocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+			cmd_iocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
 			pring->txcmplq_cnt--;
 			spin_unlock_irqrestore(temp_lock, iflag);
 			return cmd_iocb;
@@ -3613,10 +3613,10 @@ lpfc_sli_iocbq_lookup_by_tag(struct lpfc
 	spin_lock_irqsave(temp_lock, iflag);
 	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
 		cmd_iocb = phba->sli.iocbq_lookup[iotag];
-		if (cmd_iocb->cmd_flag & LPFC_IO_ON_TXCMPLQ) {
+		if (cmd_iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ) {
 			/* remove from txcmpl queue list */
 			list_del_init(&cmd_iocb->list);
-			cmd_iocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+			cmd_iocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
 			pring->txcmplq_cnt--;
 			spin_unlock_irqrestore(temp_lock, iflag);
 			return cmd_iocb;
@@ -3626,9 +3626,9 @@ lpfc_sli_iocbq_lookup_by_tag(struct lpfc
 	spin_unlock_irqrestore(temp_lock, iflag);
 	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
 			"0372 iotag x%x lookup error: max iotag (x%x) "
-			"cmd_flag x%x\n",
+			"iocb_flag x%x\n",
 			iotag, phba->sli.last_iotag,
-			cmd_iocb ? cmd_iocb->cmd_flag : 0xffff);
+			cmd_iocb ? cmd_iocb->iocb_flag : 0xffff);
 	return NULL;
 }
 
@@ -3659,7 +3659,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 
 	cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
 	if (cmdiocbp) {
-		if (cmdiocbp->cmd_cmpl) {
+		if (cmdiocbp->iocb_cmpl) {
 			/*
 			 * If an ELS command failed send an event to mgmt
 			 * application.
@@ -3677,11 +3677,11 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 			 */
 			if (pring->ringno == LPFC_ELS_RING) {
 				if ((phba->sli_rev < LPFC_SLI_REV4) &&
-				    (cmdiocbp->cmd_flag &
+				    (cmdiocbp->iocb_flag &
 							LPFC_DRIVER_ABORTED)) {
 					spin_lock_irqsave(&phba->hbalock,
 							  iflag);
-					cmdiocbp->cmd_flag &=
+					cmdiocbp->iocb_flag &=
 						~LPFC_DRIVER_ABORTED;
 					spin_unlock_irqrestore(&phba->hbalock,
 							       iflag);
@@ -3696,12 +3696,12 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 					 */
 					spin_lock_irqsave(&phba->hbalock,
 							  iflag);
-					saveq->cmd_flag |= LPFC_DELAY_MEM_FREE;
+					saveq->iocb_flag |= LPFC_DELAY_MEM_FREE;
 					spin_unlock_irqrestore(&phba->hbalock,
 							       iflag);
 				}
 				if (phba->sli_rev == LPFC_SLI_REV4) {
-					if (saveq->cmd_flag &
+					if (saveq->iocb_flag &
 					    LPFC_EXCHANGE_BUSY) {
 						/* Set cmdiocb flag for the
 						 * exchange busy so sgl (xri)
@@ -3711,12 +3711,12 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 						 */
 						spin_lock_irqsave(
 							&phba->hbalock, iflag);
-						cmdiocbp->cmd_flag |=
+						cmdiocbp->iocb_flag |=
 							LPFC_EXCHANGE_BUSY;
 						spin_unlock_irqrestore(
 							&phba->hbalock, iflag);
 					}
-					if (cmdiocbp->cmd_flag &
+					if (cmdiocbp->iocb_flag &
 					    LPFC_DRIVER_ABORTED) {
 						/*
 						 * Clear LPFC_DRIVER_ABORTED
@@ -3725,7 +3725,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 						 */
 						spin_lock_irqsave(
 							&phba->hbalock, iflag);
-						cmdiocbp->cmd_flag &=
+						cmdiocbp->iocb_flag &=
 							~LPFC_DRIVER_ABORTED;
 						spin_unlock_irqrestore(
 							&phba->hbalock, iflag);
@@ -3745,14 +3745,14 @@ lpfc_sli_process_sol_iocb(struct lpfc_hb
 							IOERR_SLI_ABORTED;
 						spin_lock_irqsave(
 							&phba->hbalock, iflag);
-						saveq->cmd_flag |=
+						saveq->iocb_flag |=
 							LPFC_DELAY_MEM_FREE;
 						spin_unlock_irqrestore(
 							&phba->hbalock, iflag);
 					}
 				}
 			}
-			(cmdiocbp->cmd_cmpl) (phba, cmdiocbp, saveq);
+			(cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
 		} else
 			lpfc_sli_release_iocbq(phba, cmdiocbp);
 	} else {
@@ -3994,11 +3994,11 @@ lpfc_sli_handle_fast_ring_event(struct l
 			spin_lock_irqsave(&phba->hbalock, iflag);
 			if (unlikely(!cmdiocbq))
 				break;
-			if (cmdiocbq->cmd_flag & LPFC_DRIVER_ABORTED)
-				cmdiocbq->cmd_flag &= ~LPFC_DRIVER_ABORTED;
-			if (cmdiocbq->cmd_cmpl) {
+			if (cmdiocbq->iocb_flag & LPFC_DRIVER_ABORTED)
+				cmdiocbq->iocb_flag &= ~LPFC_DRIVER_ABORTED;
+			if (cmdiocbq->iocb_cmpl) {
 				spin_unlock_irqrestore(&phba->hbalock, iflag);
-				(cmdiocbq->cmd_cmpl)(phba, cmdiocbq,
+				(cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
 						      &rspiocbq);
 				spin_lock_irqsave(&phba->hbalock, iflag);
 			}
@@ -4193,10 +4193,10 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_h
 			}
 			if (cmdiocbp) {
 				/* Call the specified completion routine */
-				if (cmdiocbp->cmd_cmpl) {
+				if (cmdiocbp->iocb_cmpl) {
 					spin_unlock_irqrestore(&phba->hbalock,
 							       iflag);
-					(cmdiocbp->cmd_cmpl)(phba, cmdiocbp,
+					(cmdiocbp->iocb_cmpl)(phba, cmdiocbp,
 							      saveq);
 					spin_lock_irqsave(&phba->hbalock,
 							  iflag);
@@ -4575,7 +4575,7 @@ lpfc_sli_flush_io_rings(struct lpfc_hba
 			list_splice_init(&pring->txq, &txq);
 			list_for_each_entry_safe(piocb, next_iocb,
 						 &pring->txcmplq, list)
-				piocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+				piocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
 			/* Retrieve everything on the txcmplq */
 			list_splice_init(&pring->txcmplq, &txcmplq);
 			pring->txq_cnt = 0;
@@ -4601,7 +4601,7 @@ lpfc_sli_flush_io_rings(struct lpfc_hba
 		list_splice_init(&pring->txq, &txq);
 		list_for_each_entry_safe(piocb, next_iocb,
 					 &pring->txcmplq, list)
-			piocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+			piocb->iocb_flag &= ~LPFC_IO_ON_TXCMPLQ;
 		/* Retrieve everything on the txcmplq */
 		list_splice_init(&pring->txcmplq, &txcmplq);
 		pring->txq_cnt = 0;
@@ -10117,7 +10117,7 @@ __lpfc_sli_issue_iocb_s3(struct lpfc_hba
 
 	lockdep_assert_held(&phba->hbalock);
 
-	if (piocb->cmd_cmpl && (!piocb->vport) &&
+	if (piocb->iocb_cmpl && (!piocb->vport) &&
 	   (piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
 	   (piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
@@ -10169,10 +10169,10 @@ __lpfc_sli_issue_iocb_s3(struct lpfc_hba
 		case CMD_QUE_RING_BUF64_CN:
 			/*
 			 * For IOCBs, like QUE_RING_BUF, that have no rsp ring
-			 * completion, cmd_cmpl MUST be 0.
+			 * completion, iocb_cmpl MUST be 0.
 			 */
-			if (piocb->cmd_cmpl)
-				piocb->cmd_cmpl = NULL;
+			if (piocb->iocb_cmpl)
+				piocb->iocb_cmpl = NULL;
 			fallthrough;
 		case CMD_CREATE_XRI_CR:
 		case CMD_CLOSE_XRI_CN:
@@ -10363,9 +10363,9 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 
 	fip = phba->hba_flag & HBA_FIP_SUPPORT;
 	/* The fcp commands will set command type */
-	if (iocbq->cmd_flag &  LPFC_IO_FCP)
+	if (iocbq->iocb_flag &  LPFC_IO_FCP)
 		command_type = FCP_COMMAND;
-	else if (fip && (iocbq->cmd_flag & LPFC_FIP_ELS_ID_MASK))
+	else if (fip && (iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK))
 		command_type = ELS_COMMAND_FIP;
 	else
 		command_type = ELS_COMMAND_NON_FIP;
@@ -10410,7 +10410,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 
 	switch (iocbq->iocb.ulpCommand) {
 	case CMD_ELS_REQUEST64_CR:
-		if (iocbq->cmd_flag & LPFC_IO_LIBDFC)
+		if (iocbq->iocb_flag & LPFC_IO_LIBDFC)
 			ndlp = iocbq->context_un.ndlp;
 		else
 			ndlp = (struct lpfc_nodelist *)iocbq->context1;
@@ -10437,7 +10437,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 		bf_set(wqe_pu, &wqe->els_req.wqe_com, 0);
 		/* CCP CCPE PV PRI in word10 were set in the memcpy */
 		if (command_type == ELS_COMMAND_FIP)
-			els_id = ((iocbq->cmd_flag & LPFC_FIP_ELS_ID_MASK)
+			els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK)
 					>> LPFC_FIP_ELS_ID_SHIFT);
 		pcmd = (uint32_t *) (((struct lpfc_dmabuf *)
 					iocbq->context2)->virt);
@@ -10539,7 +10539,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 		       LPFC_WQE_LENLOC_WORD4);
 		bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpPU);
 		bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
-		if (iocbq->cmd_flag & LPFC_IO_OAS) {
+		if (iocbq->iocb_flag & LPFC_IO_OAS) {
 			bf_set(wqe_oas, &wqe->fcp_iwrite.wqe_com, 1);
 			bf_set(wqe_ccpe, &wqe->fcp_iwrite.wqe_com, 1);
 			if (iocbq->priority) {
@@ -10603,7 +10603,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 		       LPFC_WQE_LENLOC_WORD4);
 		bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpPU);
 		bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
-		if (iocbq->cmd_flag & LPFC_IO_OAS) {
+		if (iocbq->iocb_flag & LPFC_IO_OAS) {
 			bf_set(wqe_oas, &wqe->fcp_iread.wqe_com, 1);
 			bf_set(wqe_ccpe, &wqe->fcp_iread.wqe_com, 1);
 			if (iocbq->priority) {
@@ -10666,7 +10666,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 		       LPFC_WQE_LENLOC_NONE);
 		bf_set(wqe_erp, &wqe->fcp_icmd.wqe_com,
 		       iocbq->iocb.ulpFCP2Rcvy);
-		if (iocbq->cmd_flag & LPFC_IO_OAS) {
+		if (iocbq->iocb_flag & LPFC_IO_OAS) {
 			bf_set(wqe_oas, &wqe->fcp_icmd.wqe_com, 1);
 			bf_set(wqe_ccpe, &wqe->fcp_icmd.wqe_com, 1);
 			if (iocbq->priority) {
@@ -10800,7 +10800,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 		abrt_iotag = iocbq->iocb.un.acxri.abortContextTag;
 		if (abrt_iotag != 0 && abrt_iotag <= phba->sli.last_iotag) {
 			abrtiocbq = phba->sli.iocbq_lookup[abrt_iotag];
-			fip = abrtiocbq->cmd_flag & LPFC_FIP_ELS_ID_MASK;
+			fip = abrtiocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK;
 		} else
 			fip = 0;
 
@@ -10909,13 +10909,13 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 		return IOCB_ERROR;
 	}
 
-	if (iocbq->cmd_flag & LPFC_IO_DIF_PASS)
+	if (iocbq->iocb_flag & LPFC_IO_DIF_PASS)
 		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_PASSTHRU);
-	else if (iocbq->cmd_flag & LPFC_IO_DIF_STRIP)
+	else if (iocbq->iocb_flag & LPFC_IO_DIF_STRIP)
 		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_STRIP);
-	else if (iocbq->cmd_flag & LPFC_IO_DIF_INSERT)
+	else if (iocbq->iocb_flag & LPFC_IO_DIF_INSERT)
 		bf_set(wqe_dif, &wqe->generic.wqe_com, LPFC_WQE_DIF_INSERT);
-	iocbq->cmd_flag &= ~(LPFC_IO_DIF_PASS | LPFC_IO_DIF_STRIP |
+	iocbq->iocb_flag &= ~(LPFC_IO_DIF_PASS | LPFC_IO_DIF_STRIP |
 			      LPFC_IO_DIF_INSERT);
 	bf_set(wqe_xri_tag, &wqe->generic.wqe_com, xritag);
 	bf_set(wqe_reqtag, &wqe->generic.wqe_com, iocbq->iotag);
@@ -11014,7 +11014,7 @@ __lpfc_sli_issue_fcp_io_s4(struct lpfc_h
 	}
 
 	/* add the VMID tags as per switch response */
-	if (unlikely(piocb->cmd_flag & LPFC_IO_VMID)) {
+	if (unlikely(piocb->iocb_flag & LPFC_IO_VMID)) {
 		if (phba->pport->vmid_priority_tagging) {
 			bf_set(wqe_ccpe, &wqe->fcp_iwrite.wqe_com, 1);
 			bf_set(wqe_ccp, &wqe->fcp_iwrite.wqe_com,
@@ -11053,8 +11053,8 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba
 	struct lpfc_sli_ring *pring;
 
 	/* Get the WQ */
-	if ((piocb->cmd_flag & LPFC_IO_FCP) ||
-	    (piocb->cmd_flag & LPFC_USE_FCPWQIDX)) {
+	if ((piocb->iocb_flag & LPFC_IO_FCP) ||
+	    (piocb->iocb_flag & LPFC_USE_FCPWQIDX)) {
 		wq = phba->sli4_hba.hdwq[piocb->hba_wqidx].io_wq;
 	} else {
 		wq = phba->sli4_hba.els_wq;
@@ -11095,7 +11095,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba
 				}
 			}
 		}
-	} else if (piocb->cmd_flag &  LPFC_IO_FCP) {
+	} else if (piocb->iocb_flag &  LPFC_IO_FCP) {
 		/* These IO's already have an XRI and a mapped sgl. */
 		sglq = NULL;
 	}
@@ -11212,14 +11212,14 @@ lpfc_sli4_calc_ring(struct lpfc_hba *phb
 {
 	struct lpfc_io_buf *lpfc_cmd;
 
-	if (piocb->cmd_flag & (LPFC_IO_FCP | LPFC_USE_FCPWQIDX)) {
+	if (piocb->iocb_flag & (LPFC_IO_FCP | LPFC_USE_FCPWQIDX)) {
 		if (unlikely(!phba->sli4_hba.hdwq))
 			return NULL;
 		/*
 		 * for abort iocb hba_wqidx should already
 		 * be setup based on what work queue we used.
 		 */
-		if (!(piocb->cmd_flag & LPFC_USE_FCPWQIDX)) {
+		if (!(piocb->iocb_flag & LPFC_USE_FCPWQIDX)) {
 			lpfc_cmd = (struct lpfc_io_buf *)piocb->context1;
 			piocb->hba_wqidx = lpfc_cmd->hdwq_no;
 		}
@@ -12361,14 +12361,14 @@ lpfc_sli_issue_abort_iotag(struct lpfc_h
 	icmd = &cmdiocb->iocb;
 	if (icmd->ulpCommand == CMD_ABORT_XRI_CN ||
 	    icmd->ulpCommand == CMD_CLOSE_XRI_CN ||
-	    cmdiocb->cmd_flag & LPFC_DRIVER_ABORTED)
+	    cmdiocb->iocb_flag & LPFC_DRIVER_ABORTED)
 		return IOCB_ABORTING;
 
 	if (!pring) {
-		if (cmdiocb->cmd_flag & LPFC_IO_FABRIC)
-			cmdiocb->fabric_cmd_cmpl = lpfc_ignore_els_cmpl;
+		if (cmdiocb->iocb_flag & LPFC_IO_FABRIC)
+			cmdiocb->fabric_iocb_cmpl = lpfc_ignore_els_cmpl;
 		else
-			cmdiocb->cmd_cmpl = lpfc_ignore_els_cmpl;
+			cmdiocb->iocb_cmpl = lpfc_ignore_els_cmpl;
 		return retval;
 	}
 
@@ -12378,10 +12378,10 @@ lpfc_sli_issue_abort_iotag(struct lpfc_h
 	 */
 	if ((vport->load_flag & FC_UNLOADING) &&
 	    pring->ringno == LPFC_ELS_RING) {
-		if (cmdiocb->cmd_flag & LPFC_IO_FABRIC)
-			cmdiocb->fabric_cmd_cmpl = lpfc_ignore_els_cmpl;
+		if (cmdiocb->iocb_flag & LPFC_IO_FABRIC)
+			cmdiocb->fabric_iocb_cmpl = lpfc_ignore_els_cmpl;
 		else
-			cmdiocb->cmd_cmpl = lpfc_ignore_els_cmpl;
+			cmdiocb->iocb_cmpl = lpfc_ignore_els_cmpl;
 		return retval;
 	}
 
@@ -12393,7 +12393,7 @@ lpfc_sli_issue_abort_iotag(struct lpfc_h
 	/* This signals the response to set the correct status
 	 * before calling the completion handler
 	 */
-	cmdiocb->cmd_flag |= LPFC_DRIVER_ABORTED;
+	cmdiocb->iocb_flag |= LPFC_DRIVER_ABORTED;
 
 	iabt = &abtsiocbp->iocb;
 	iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
@@ -12414,10 +12414,10 @@ lpfc_sli_issue_abort_iotag(struct lpfc_h
 
 	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
 	abtsiocbp->hba_wqidx = cmdiocb->hba_wqidx;
-	if (cmdiocb->cmd_flag & LPFC_IO_FCP)
-		abtsiocbp->cmd_flag |= (LPFC_IO_FCP | LPFC_USE_FCPWQIDX);
-	if (cmdiocb->cmd_flag & LPFC_IO_FOF)
-		abtsiocbp->cmd_flag |= LPFC_IO_FOF;
+	if (cmdiocb->iocb_flag & LPFC_IO_FCP)
+		abtsiocbp->iocb_flag |= (LPFC_IO_FCP | LPFC_USE_FCPWQIDX);
+	if (cmdiocb->iocb_flag & LPFC_IO_FOF)
+		abtsiocbp->iocb_flag |= LPFC_IO_FOF;
 
 	if (phba->link_state < LPFC_LINK_UP ||
 	    (phba->sli_rev == LPFC_SLI_REV4 &&
@@ -12427,9 +12427,9 @@ lpfc_sli_issue_abort_iotag(struct lpfc_h
 		iabt->ulpCommand = CMD_ABORT_XRI_CN;
 
 	if (cmpl)
-		abtsiocbp->cmd_cmpl = cmpl;
+		abtsiocbp->iocb_cmpl = cmpl;
 	else
-		abtsiocbp->cmd_cmpl = lpfc_sli_abort_els_cmpl;
+		abtsiocbp->iocb_cmpl = lpfc_sli_abort_els_cmpl;
 	abtsiocbp->vport = vport;
 
 	if (phba->sli_rev == LPFC_SLI_REV4) {
@@ -12456,7 +12456,7 @@ abort_iotag_exit:
 			 abtsiocbp->iotag, retval);
 
 	if (retval) {
-		cmdiocb->cmd_flag &= ~LPFC_DRIVER_ABORTED;
+		cmdiocb->iocb_flag &= ~LPFC_DRIVER_ABORTED;
 		__lpfc_sli_release_iocbq(phba, abtsiocbp);
 	}
 
@@ -12524,9 +12524,9 @@ lpfc_sli_validate_fcp_iocb_for_abort(str
 	 * can't be premarked as driver aborted, nor be an ABORT iocb itself
 	 */
 	icmd = &iocbq->iocb;
-	if (!(iocbq->cmd_flag & LPFC_IO_FCP) ||
-	    !(iocbq->cmd_flag & LPFC_IO_ON_TXCMPLQ) ||
-	    (iocbq->cmd_flag & LPFC_DRIVER_ABORTED) ||
+	if (!(iocbq->iocb_flag & LPFC_IO_FCP) ||
+	    !(iocbq->iocb_flag & LPFC_IO_ON_TXCMPLQ) ||
+	    (iocbq->iocb_flag & LPFC_DRIVER_ABORTED) ||
 	    (icmd->ulpCommand == CMD_ABORT_XRI_CN ||
 	     icmd->ulpCommand == CMD_CLOSE_XRI_CN))
 		return -EINVAL;
@@ -12630,8 +12630,8 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vpo
 
 		if (!iocbq || iocbq->vport != vport)
 			continue;
-		if (!(iocbq->cmd_flag & LPFC_IO_FCP) ||
-		    !(iocbq->cmd_flag & LPFC_IO_ON_TXCMPLQ))
+		if (!(iocbq->iocb_flag & LPFC_IO_FCP) ||
+		    !(iocbq->iocb_flag & LPFC_IO_ON_TXCMPLQ))
 			continue;
 
 		/* Include counting outstanding aborts */
@@ -12857,8 +12857,8 @@ lpfc_sli_abort_taskmgmt(struct lpfc_vpor
 		 * If the iocbq is already being aborted, don't take a second
 		 * action, but do count it.
 		 */
-		if ((iocbq->cmd_flag & LPFC_DRIVER_ABORTED) ||
-		    !(iocbq->cmd_flag & LPFC_IO_ON_TXCMPLQ)) {
+		if ((iocbq->iocb_flag & LPFC_DRIVER_ABORTED) ||
+		    !(iocbq->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
 			if (phba->sli_rev == LPFC_SLI_REV4)
 				spin_unlock(&pring_s4->ring_lock);
 			spin_unlock(&lpfc_cmd->buf_lock);
@@ -12888,10 +12888,10 @@ lpfc_sli_abort_taskmgmt(struct lpfc_vpor
 
 		/* ABTS WQE must go to the same WQ as the WQE to be aborted */
 		abtsiocbq->hba_wqidx = iocbq->hba_wqidx;
-		if (iocbq->cmd_flag & LPFC_IO_FCP)
-			abtsiocbq->cmd_flag |= LPFC_USE_FCPWQIDX;
-		if (iocbq->cmd_flag & LPFC_IO_FOF)
-			abtsiocbq->cmd_flag |= LPFC_IO_FOF;
+		if (iocbq->iocb_flag & LPFC_IO_FCP)
+			abtsiocbq->iocb_flag |= LPFC_USE_FCPWQIDX;
+		if (iocbq->iocb_flag & LPFC_IO_FOF)
+			abtsiocbq->iocb_flag |= LPFC_IO_FOF;
 
 		ndlp = lpfc_cmd->rdata->pnode;
 
@@ -12902,13 +12902,13 @@ lpfc_sli_abort_taskmgmt(struct lpfc_vpor
 			abtsiocbq->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
 
 		/* Setup callback routine and issue the command. */
-		abtsiocbq->cmd_cmpl = lpfc_sli_abort_fcp_cmpl;
+		abtsiocbq->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
 
 		/*
 		 * Indicate the IO is being aborted by the driver and set
 		 * the caller's flag into the aborted IO.
 		 */
-		iocbq->cmd_flag |= LPFC_DRIVER_ABORTED;
+		iocbq->iocb_flag |= LPFC_DRIVER_ABORTED;
 
 		if (phba->sli_rev == LPFC_SLI_REV4) {
 			ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno,
@@ -12957,7 +12957,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba
 	struct lpfc_io_buf *lpfc_cmd;
 
 	spin_lock_irqsave(&phba->hbalock, iflags);
-	if (cmdiocbq->cmd_flag & LPFC_IO_WAKE_TMO) {
+	if (cmdiocbq->iocb_flag & LPFC_IO_WAKE_TMO) {
 
 		/*
 		 * A time out has occurred for the iocb.  If a time out
@@ -12966,26 +12966,26 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba
 		 */
 
 		spin_unlock_irqrestore(&phba->hbalock, iflags);
-		cmdiocbq->cmd_cmpl = cmdiocbq->wait_cmd_cmpl;
-		cmdiocbq->wait_cmd_cmpl = NULL;
-		if (cmdiocbq->cmd_cmpl)
-			(cmdiocbq->cmd_cmpl)(phba, cmdiocbq, NULL);
+		cmdiocbq->iocb_cmpl = cmdiocbq->wait_iocb_cmpl;
+		cmdiocbq->wait_iocb_cmpl = NULL;
+		if (cmdiocbq->iocb_cmpl)
+			(cmdiocbq->iocb_cmpl)(phba, cmdiocbq, NULL);
 		else
 			lpfc_sli_release_iocbq(phba, cmdiocbq);
 		return;
 	}
 
-	cmdiocbq->cmd_flag |= LPFC_IO_WAKE;
+	cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
 	if (cmdiocbq->context2 && rspiocbq)
 		memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
 		       &rspiocbq->iocb, sizeof(IOCB_t));
 
 	/* Set the exchange busy flag for task management commands */
-	if ((cmdiocbq->cmd_flag & LPFC_IO_FCP) &&
-		!(cmdiocbq->cmd_flag & LPFC_IO_LIBDFC)) {
+	if ((cmdiocbq->iocb_flag & LPFC_IO_FCP) &&
+		!(cmdiocbq->iocb_flag & LPFC_IO_LIBDFC)) {
 		lpfc_cmd = container_of(cmdiocbq, struct lpfc_io_buf,
 			cur_iocbq);
-		if (rspiocbq && (rspiocbq->cmd_flag & LPFC_EXCHANGE_BUSY))
+		if (rspiocbq && (rspiocbq->iocb_flag & LPFC_EXCHANGE_BUSY))
 			lpfc_cmd->flags |= LPFC_SBUF_XBUSY;
 		else
 			lpfc_cmd->flags &= ~LPFC_SBUF_XBUSY;
@@ -13004,7 +13004,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba
  * @piocbq: Pointer to command iocb.
  * @flag: Flag to test.
  *
- * This routine grabs the hbalock and then test the cmd_flag to
+ * This routine grabs the hbalock and then test the iocb_flag to
  * see if the passed in flag is set.
  * Returns:
  * 1 if flag is set.
@@ -13018,7 +13018,7 @@ lpfc_chk_iocb_flg(struct lpfc_hba *phba,
 	int ret;
 
 	spin_lock_irqsave(&phba->hbalock, iflags);
-	ret = piocbq->cmd_flag & flag;
+	ret = piocbq->iocb_flag & flag;
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 	return ret;
 
@@ -13033,14 +13033,14 @@ lpfc_chk_iocb_flg(struct lpfc_hba *phba,
  * @timeout: Timeout in number of seconds.
  *
  * This function issues the iocb to firmware and waits for the
- * iocb to complete. The cmd_cmpl field of the shall be used
+ * iocb to complete. The iocb_cmpl field of the shall be used
  * to handle iocbs which time out. If the field is NULL, the
  * function shall free the iocbq structure.  If more clean up is
  * needed, the caller is expected to provide a completion function
  * that will provide the needed clean up.  If the iocb command is
  * not completed within timeout seconds, the function will either
- * free the iocbq structure (if cmd_cmpl == NULL) or execute the
- * completion function set in the cmd_cmpl field and then return
+ * free the iocbq structure (if iocb_cmpl == NULL) or execute the
+ * completion function set in the iocb_cmpl field and then return
  * a status of IOCB_TIMEDOUT.  The caller should not free the iocb
  * resources if this function returns IOCB_TIMEDOUT.
  * The function waits for the iocb completion using an
@@ -13052,7 +13052,7 @@ lpfc_chk_iocb_flg(struct lpfc_hba *phba,
  * This function assumes that the iocb completions occur while
  * this function sleep. So, this function cannot be called from
  * the thread which process iocb completion for this ring.
- * This function clears the cmd_flag of the iocb object before
+ * This function clears the iocb_flag of the iocb object before
  * issuing the iocb and the iocb completion handler sets this
  * flag and wakes this thread when the iocb completes.
  * The contents of the response iocb will be copied to prspiocbq
@@ -13092,10 +13092,10 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba
 		piocb->context2 = prspiocbq;
 	}
 
-	piocb->wait_cmd_cmpl = piocb->cmd_cmpl;
-	piocb->cmd_cmpl = lpfc_sli_wake_iocb_wait;
+	piocb->wait_iocb_cmpl = piocb->iocb_cmpl;
+	piocb->iocb_cmpl = lpfc_sli_wake_iocb_wait;
 	piocb->context_un.wait_queue = &done_q;
-	piocb->cmd_flag &= ~(LPFC_IO_WAKE | LPFC_IO_WAKE_TMO);
+	piocb->iocb_flag &= ~(LPFC_IO_WAKE | LPFC_IO_WAKE_TMO);
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
 		if (lpfc_readl(phba->HCregaddr, &creg_val))
@@ -13113,7 +13113,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba
 				lpfc_chk_iocb_flg(phba, piocb, LPFC_IO_WAKE),
 				timeout_req);
 		spin_lock_irqsave(&phba->hbalock, iflags);
-		if (!(piocb->cmd_flag & LPFC_IO_WAKE)) {
+		if (!(piocb->iocb_flag & LPFC_IO_WAKE)) {
 
 			/*
 			 * IOCB timed out.  Inform the wake iocb wait
@@ -13121,7 +13121,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba
 			 */
 
 			iocb_completed = false;
-			piocb->cmd_flag |= LPFC_IO_WAKE_TMO;
+			piocb->iocb_flag |= LPFC_IO_WAKE_TMO;
 		}
 		spin_unlock_irqrestore(&phba->hbalock, iflags);
 		if (iocb_completed) {
@@ -13176,7 +13176,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba
 		piocb->context2 = NULL;
 
 	piocb->context_un.wait_queue = NULL;
-	piocb->cmd_cmpl = NULL;
+	piocb->iocb_cmpl = NULL;
 	return retval;
 }
 
@@ -14145,7 +14145,7 @@ lpfc_sli4_iocb_param_transfer(struct lpf
 	/* Map WCQE parameters into irspiocb parameters */
 	status = bf_get(lpfc_wcqe_c_status, wcqe);
 	pIocbIn->iocb.ulpStatus = (status & LPFC_IOCB_STATUS_MASK);
-	if (pIocbOut->cmd_flag & LPFC_IO_FCP)
+	if (pIocbOut->iocb_flag & LPFC_IO_FCP)
 		if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
 			pIocbIn->iocb.un.fcpi.fcpi_parm =
 					pIocbOut->iocb.un.fcpi.fcpi_parm -
@@ -14227,7 +14227,7 @@ lpfc_sli4_iocb_param_transfer(struct lpf
 	/* Pick up HBA exchange busy condition */
 	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
 		spin_lock_irqsave(&phba->hbalock, iflags);
-		pIocbIn->cmd_flag |= LPFC_EXCHANGE_BUSY;
+		pIocbIn->iocb_flag |= LPFC_EXCHANGE_BUSY;
 		spin_unlock_irqrestore(&phba->hbalock, iflags);
 	}
 }
@@ -15078,6 +15078,7 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc
 {
 	struct lpfc_sli_ring *pring = cq->pring;
 	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_iocbq irspiocbq;
 	unsigned long iflags;
 
 	/* Check for response status */
@@ -15116,31 +15117,39 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	cmdiocbq->isr_timestamp = cq->isr_timestamp;
 #endif
-	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
-		spin_lock_irqsave(&phba->hbalock, iflags);
-		cmdiocbq->cmd_flag |= LPFC_EXCHANGE_BUSY;
-		spin_unlock_irqrestore(&phba->hbalock, iflags);
-	}
+	if (cmdiocbq->iocb_cmpl == NULL) {
+		if (cmdiocbq->wqe_cmpl) {
+			/* For FCP the flag is cleared in wqe_cmpl */
+			if (!(cmdiocbq->iocb_flag & LPFC_IO_FCP) &&
+			    cmdiocbq->iocb_flag & LPFC_DRIVER_ABORTED) {
+				spin_lock_irqsave(&phba->hbalock, iflags);
+				cmdiocbq->iocb_flag &= ~LPFC_DRIVER_ABORTED;
+				spin_unlock_irqrestore(&phba->hbalock, iflags);
+			}
 
-	if (cmdiocbq->cmd_cmpl) {
-		/* For FCP the flag is cleared in cmd_cmpl */
-		if (!(cmdiocbq->cmd_flag & LPFC_IO_FCP) &&
-		    cmdiocbq->cmd_flag & LPFC_DRIVER_ABORTED) {
-			spin_lock_irqsave(&phba->hbalock, iflags);
-			cmdiocbq->cmd_flag &= ~LPFC_DRIVER_ABORTED;
-			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			/* Pass the cmd_iocb and the wcqe to the upper layer */
+			(cmdiocbq->wqe_cmpl)(phba, cmdiocbq, wcqe);
+			return;
 		}
-
-		/* Pass the cmd_iocb and the wcqe to the upper layer */
-		memcpy(&cmdiocbq->wcqe_cmpl, wcqe,
-		       sizeof(struct lpfc_wcqe_complete));
-		(cmdiocbq->cmd_cmpl)(phba, cmdiocbq, cmdiocbq);
-	} else {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 				"0375 FCP cmdiocb not callback function "
 				"iotag: (%d)\n",
 				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return;
+	}
+
+	/* Only SLI4 non-IO commands stil use IOCB */
+	/* Fake the irspiocb and copy necessary response information */
+	lpfc_sli4_iocb_param_transfer(phba, &irspiocbq, cmdiocbq, wcqe);
+
+	if (cmdiocbq->iocb_flag & LPFC_DRIVER_ABORTED) {
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		cmdiocbq->iocb_flag &= ~LPFC_DRIVER_ABORTED;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
 	}
+
+	/* Pass the cmd_iocb and the rsp state to the upper layer */
+	(cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
 }
 
 /**
@@ -18962,7 +18971,7 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_vpor
 	}
 
 	ctiocb->vport = phba->pport;
-	ctiocb->cmd_cmpl = lpfc_sli4_seq_abort_rsp_cmpl;
+	ctiocb->iocb_cmpl = lpfc_sli4_seq_abort_rsp_cmpl;
 	ctiocb->sli4_lxritag = NO_XRI;
 	ctiocb->sli4_xritag = NO_XRI;
 
@@ -19365,8 +19374,8 @@ lpfc_sli4_handle_mds_loopback(struct lpf
 
 	iocbq->context2 = pcmd;
 	iocbq->vport = vport;
-	iocbq->cmd_flag &= ~LPFC_FIP_ELS_ID_MASK;
-	iocbq->cmd_flag |= LPFC_USE_FCPWQIDX;
+	iocbq->iocb_flag &= ~LPFC_FIP_ELS_ID_MASK;
+	iocbq->iocb_flag |= LPFC_USE_FCPWQIDX;
 
 	/*
 	 * Setup rest of the iocb as though it were a WQE
@@ -19384,7 +19393,7 @@ lpfc_sli4_handle_mds_loopback(struct lpf
 
 	iocbq->iocb.ulpCommand = CMD_SEND_FRAME;
 	iocbq->iocb.ulpLe = 1;
-	iocbq->cmd_cmpl = lpfc_sli4_mds_loopback_cmpl;
+	iocbq->iocb_cmpl = lpfc_sli4_mds_loopback_cmpl;
 	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocbq, 0);
 	if (rc == IOCB_ERROR)
 		goto exit;
@@ -21226,7 +21235,7 @@ lpfc_wqe_bpl2sgl(struct lpfc_hba *phba,
 	cmd = bf_get(wqe_cmnd, &wqe->generic.wqe_com);
 	if (cmd == CMD_XMIT_BLS_RSP64_WQE)
 		return sglq->sli4_xritag;
-	numBdes = pwqeq->num_bdes;
+	numBdes = pwqeq->rsvd2;
 	if (numBdes) {
 		/* The addrHigh and addrLow fields within the WQE
 		 * have not been byteswapped yet so there is no
@@ -21327,7 +21336,7 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phb
 	uint32_t ret = 0;
 
 	/* NVME_LS and NVME_LS ABTS requests. */
-	if (pwqe->cmd_flag & LPFC_IO_NVME_LS) {
+	if (pwqe->iocb_flag & LPFC_IO_NVME_LS) {
 		pring =  phba->sli4_hba.nvmels_wq->pring;
 		lpfc_qp_spin_lock_irqsave(&pring->ring_lock, iflags,
 					  qp, wq_access);
@@ -21358,7 +21367,7 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phb
 	}
 
 	/* NVME_FCREQ and NVME_ABTS requests */
-	if (pwqe->cmd_flag & (LPFC_IO_NVME | LPFC_IO_FCP | LPFC_IO_CMF)) {
+	if (pwqe->iocb_flag & (LPFC_IO_NVME | LPFC_IO_FCP | LPFC_IO_CMF)) {
 		/* Get the IO distribution (hba_wqidx) for WQ assignment. */
 		wq = qp->io_wq;
 		pring = wq->pring;
@@ -21380,7 +21389,7 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phb
 	}
 
 	/* NVMET requests */
-	if (pwqe->cmd_flag & LPFC_IO_NVMET) {
+	if (pwqe->iocb_flag & LPFC_IO_NVMET) {
 		/* Get the IO distribution (hba_wqidx) for WQ assignment. */
 		wq = qp->io_wq;
 		pring = wq->pring;
@@ -21446,7 +21455,7 @@ lpfc_sli4_issue_abort_iotag(struct lpfc_
 		return WQE_NORESOURCE;
 
 	/* Indicate the IO is being aborted by the driver. */
-	cmdiocb->cmd_flag |= LPFC_DRIVER_ABORTED;
+	cmdiocb->iocb_flag |= LPFC_DRIVER_ABORTED;
 
 	abtswqe = &abtsiocb->wqe;
 	memset(abtswqe, 0, sizeof(*abtswqe));
@@ -21465,15 +21474,15 @@ lpfc_sli4_issue_abort_iotag(struct lpfc_
 
 	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
 	abtsiocb->hba_wqidx = cmdiocb->hba_wqidx;
-	abtsiocb->cmd_flag |= LPFC_USE_FCPWQIDX;
-	if (cmdiocb->cmd_flag & LPFC_IO_FCP)
-		abtsiocb->cmd_flag |= LPFC_IO_FCP;
-	if (cmdiocb->cmd_flag & LPFC_IO_NVME)
-		abtsiocb->cmd_flag |= LPFC_IO_NVME;
-	if (cmdiocb->cmd_flag & LPFC_IO_FOF)
-		abtsiocb->cmd_flag |= LPFC_IO_FOF;
+	abtsiocb->iocb_flag |= LPFC_USE_FCPWQIDX;
+	if (cmdiocb->iocb_flag & LPFC_IO_FCP)
+		abtsiocb->iocb_flag |= LPFC_IO_FCP;
+	if (cmdiocb->iocb_flag & LPFC_IO_NVME)
+		abtsiocb->iocb_flag |= LPFC_IO_NVME;
+	if (cmdiocb->iocb_flag & LPFC_IO_FOF)
+		abtsiocb->iocb_flag |= LPFC_IO_FOF;
 	abtsiocb->vport = vport;
-	abtsiocb->cmd_cmpl = cmpl;
+	abtsiocb->wqe_cmpl = cmpl;
 
 	lpfc_cmd = container_of(cmdiocb, struct lpfc_io_buf, cur_iocbq);
 	retval = lpfc_sli4_issue_wqe(phba, lpfc_cmd->hdwq, abtsiocb);
@@ -21484,7 +21493,7 @@ lpfc_sli4_issue_abort_iotag(struct lpfc_
 			 xritag, cmdiocb->iotag, abtsiocb->iotag, retval);
 
 	if (retval) {
-		cmdiocb->cmd_flag &= ~LPFC_DRIVER_ABORTED;
+		cmdiocb->iocb_flag &= ~LPFC_DRIVER_ABORTED;
 		__lpfc_sli_release_iocbq(phba, abtsiocb);
 	}
 
@@ -21846,7 +21855,8 @@ void lpfc_release_io_buf(struct lpfc_hba
 
 	/* MUST zero fields if buffer is reused by another protocol */
 	lpfc_ncmd->nvmeCmd = NULL;
-	lpfc_ncmd->cur_iocbq.cmd_cmpl = NULL;
+	lpfc_ncmd->cur_iocbq.wqe_cmpl = NULL;
+	lpfc_ncmd->cur_iocbq.iocb_cmpl = NULL;
 
 	if (phba->cfg_xpsgl && !phba->nvmet_support &&
 	    !list_empty(&lpfc_ncmd->dma_sgl_xtra_list))
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -35,7 +35,7 @@ typedef enum _lpfc_ctx_cmd {
 	LPFC_CTX_HOST
 } lpfc_ctx_cmd;
 
-union lpfc_vmid_tag {
+union lpfc_vmid_iocb_tag {
 	uint32_t app_id;
 	uint8_t cs_ctl_vmid;
 	struct lpfc_vmid_context *vmid_context;	/* UVEM context information */
@@ -69,16 +69,16 @@ struct lpfc_iocbq {
 	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
 	uint16_t hba_wqidx;     /* index to HBA work queue */
 	struct lpfc_cq_event cq_event;
+	struct lpfc_wcqe_complete wcqe_cmpl;	/* WQE cmpl */
 	uint64_t isr_timestamp;
 
 	union lpfc_wqe128 wqe;	/* SLI-4 */
 	IOCB_t iocb;		/* SLI-3 */
-	struct lpfc_wcqe_complete wcqe_cmpl;	/* WQE cmpl */
 
-	uint8_t num_bdes;
+	uint8_t rsvd2;
 	uint8_t priority;	/* OAS priority */
 	uint8_t retry;		/* retry counter for IOCB cmd - if needed */
-	u32 cmd_flag;
+	uint32_t iocb_flag;
 #define LPFC_IO_LIBDFC		1	/* libdfc iocb */
 #define LPFC_IO_WAKE		2	/* Synchronous I/O completed */
 #define LPFC_IO_WAKE_TMO	LPFC_IO_WAKE /* Synchronous I/O timed out */
@@ -123,13 +123,15 @@ struct lpfc_iocbq {
 		struct lpfc_node_rrq *rrq;
 	} context_un;
 
-	union lpfc_vmid_tag vmid_tag;
-	void (*fabric_cmd_cmpl)(struct lpfc_hba *phba, struct lpfc_iocbq *cmd,
-				struct lpfc_iocbq *rsp);
-	void (*wait_cmd_cmpl)(struct lpfc_hba *phba, struct lpfc_iocbq *cmd,
-			      struct lpfc_iocbq *rsp);
-	void (*cmd_cmpl)(struct lpfc_hba *phba, struct lpfc_iocbq *cmd,
-			 struct lpfc_iocbq *rsp);
+	union lpfc_vmid_iocb_tag vmid_tag;
+	void (*fabric_iocb_cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
+			   struct lpfc_iocbq *);
+	void (*wait_iocb_cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
+			   struct lpfc_iocbq *);
+	void (*iocb_cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
+			   struct lpfc_iocbq *);
+	void (*wqe_cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
+			  struct lpfc_wcqe_complete *);
 };
 
 #define SLI_IOCB_RET_IOCB      1	/* Return IOCB if cmd ring full */

[PATCH 5.15 053/132] mmc: block: Remove error check of hw_reset on reset

[Greg Kroah-Hartman]

From: Christian Löhle <CLoehle@hyperstone.com>

commit 406e14808ee695cbae1eafa5fd3ac563c29470ab upstream.

Before switching back to the right partition in mmc_blk_reset there used
to be a check if hw_reset was even supported. This return value
was removed, so there is no reason to check. Furthermore ensure
part_curr is not falsely set to a valid value on reset or
partition switch error.

As part of this change the code paths of mmc_blk_reset calls were checked
to ensure no commands are issued after a failed mmc_blk_reset directly
without going through the block layer.

Fixes: fefdd3c91e0a ("mmc: core: Drop superfluous validations in mmc_hw|sw_reset()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/e91be6199d04414a91e20611c81bfe1d@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/block.c |   44 ++++++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 18 deletions(-)

--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -133,6 +133,7 @@ struct mmc_blk_data {
 	 * track of the current selected device partition.
 	 */
 	unsigned int	part_curr;
+#define MMC_BLK_PART_INVALID	UINT_MAX	/* Unknown partition active */
 	int	area_type;
 
 	/* debugfs files (only in main mmc_blk_data) */
@@ -984,9 +985,16 @@ static unsigned int mmc_blk_data_timeout
 	return ms;
 }
 
+/*
+ * Attempts to reset the card and get back to the requested partition.
+ * Therefore any error here must result in cancelling the block layer
+ * request, it must not be reattempted without going through the mmc_blk
+ * partition sanity checks.
+ */
 static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host,
 			 int type)
 {
+	struct mmc_blk_data *main_md = dev_get_drvdata(&host->card->dev);
 	int err;
 
 	if (md->reset_done & type)
@@ -994,23 +1002,22 @@ static int mmc_blk_reset(struct mmc_blk_
 
 	md->reset_done |= type;
 	err = mmc_hw_reset(host);
+	/*
+	 * A successful reset will leave the card in the main partition, but
+	 * upon failure it might not be, so set it to MMC_BLK_PART_INVALID
+	 * in that case.
+	 */
+	main_md->part_curr = err ? MMC_BLK_PART_INVALID : main_md->part_type;
+	if (err)
+		return err;
 	/* Ensure we switch back to the correct partition */
-	if (err) {
-		struct mmc_blk_data *main_md =
-			dev_get_drvdata(&host->card->dev);
-		int part_err;
-
-		main_md->part_curr = main_md->part_type;
-		part_err = mmc_blk_part_switch(host->card, md->part_type);
-		if (part_err) {
-			/*
-			 * We have failed to get back into the correct
-			 * partition, so we need to abort the whole request.
-			 */
-			return -ENODEV;
-		}
-	}
-	return err;
+	if (mmc_blk_part_switch(host->card, md->part_type))
+		/*
+		 * We have failed to get back into the correct
+		 * partition, so we need to abort the whole request.
+		 */
+		return -ENODEV;
+	return 0;
 }
 
 static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type)
@@ -1855,8 +1862,9 @@ static void mmc_blk_mq_rw_recovery(struc
 		return;
 
 	/* Reset before last retry */
-	if (mqrq->retries + 1 == MMC_MAX_RETRIES)
-		mmc_blk_reset(md, card->host, type);
+	if (mqrq->retries + 1 == MMC_MAX_RETRIES &&
+	    mmc_blk_reset(md, card->host, type))
+		return;
 
 	/* Command errors fail fast, so use all MMC_MAX_RETRIES */
 	if (brq->sbc.error || brq->cmd.error)

[PATCH 5.15 054/132] ethtool: eeprom: fix null-deref on genl_info in dump

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

commit 9d9effca9d7d7cf6341182a7c5cabcbd6fa28063 upstream.

The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on
genl_info in dump") is also needed for ethtool eeprom.

Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5575919a2efc74cd9ad64021880afc3805c54166.1666362167.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ethtool/eeprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ethtool/eeprom.c b/net/ethtool/eeprom.c
index 1c94bb8ea03f..49c0a2a77f02 100644
--- a/net/ethtool/eeprom.c
+++ b/net/ethtool/eeprom.c
@@ -124,7 +124,7 @@ static int eeprom_prepare_data(const struct ethnl_req_info *req_base,
 	if (ret)
 		goto err_free;
 
-	ret = get_module_eeprom_by_page(dev, &page_data, info->extack);
+	ret = get_module_eeprom_by_page(dev, &page_data, info ? info->extack : NULL);
 	if (ret < 0)
 		goto err_ops;
 
-- 
2.38.1

[PATCH 5.15 055/132] net: ieee802154: fix error return code in dgram_bind()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

commit 444d8ad4916edec8a9fc684e841287db9b1e999f upstream.

Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220919160830.1436109-1-weiyongjun@huaweicloud.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ieee802154/socket.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ieee802154/socket.c
+++ b/net/ieee802154/socket.c
@@ -502,8 +502,10 @@ static int dgram_bind(struct sock *sk, s
 	if (err < 0)
 		goto out;
 
-	if (addr->family != AF_IEEE802154)
+	if (addr->family != AF_IEEE802154) {
+		err = -EINVAL;
 		goto out;
+	}
 
 	ieee802154_addr_from_sa(&haddr, &addr->addr);
 	dev = ieee802154_get_dev(sock_net(sk), &haddr);

[PATCH 5.15 056/132] media: v4l2: Fix v4l2_i2c_subdev_set_name function documentation

[Greg Kroah-Hartman]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit bb9ea2c31fa11b789ade4c3abcdda3c5370a76ab ]

The doc says the I²C device's name is used if devname is NULL, but
actually the I²C device driver's name is used.

Fixes: 0658293012af ("media: v4l: subdev: Add a function to set an I²C sub-device's name")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/media/v4l2-common.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 3eb202259e8c..5e25a098e8ce 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -175,7 +175,8 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
  *
  * @sd: pointer to &struct v4l2_subdev
  * @client: pointer to struct i2c_client
- * @devname: the name of the device; if NULL, the I²C device's name will be used
+ * @devname: the name of the device; if NULL, the I²C device drivers's name
+ *           will be used
  * @postfix: sub-device specific string to put right after the I²C device name;
  *	     may be NULL
  */
-- 
2.35.1

[PATCH 5.15 057/132] media: atomisp: prevent integer overflow in sh_css_set_black_frame()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3ad290194bb06979367622e47357462836c1d3b4 ]

The "height" and "width" values come from the user so the "height * width"
multiplication can overflow.

Link: https://lore.kernel.org/r/YxBBCRnm3mmvaiuR@kili

Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/atomisp/pci/sh_css_params.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/sh_css_params.c b/drivers/staging/media/atomisp/pci/sh_css_params.c
index ccc007879564..deecffd438ae 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_params.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_params.c
@@ -962,8 +962,8 @@ sh_css_set_black_frame(struct ia_css_stream *stream,
 		params->fpn_config.data = NULL;
 	}
 	if (!params->fpn_config.data) {
-		params->fpn_config.data = kvmalloc(height * width *
-						   sizeof(short), GFP_KERNEL);
+		params->fpn_config.data = kvmalloc(array3_size(height, width, sizeof(short)),
+						   GFP_KERNEL);
 		if (!params->fpn_config.data) {
 			IA_CSS_ERROR("out of memory");
 			IA_CSS_LEAVE_ERR_PRIVATE(-ENOMEM);
-- 
2.35.1

[PATCH 5.15 058/132] drm/msm: Fix return type of mdp4_lvds_connector_mode_valid

[Greg Kroah-Hartman]

From: Nathan Huckleberry <nhuck@google.com>

[ Upstream commit 0b33a33bd15d5bab73b87152b220a8d0153a4587 ]

The mode_valid field in drm_connector_helper_funcs is expected to be of
type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
                                     struct drm_display_mode *mode);

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.

The return type of mdp4_lvds_connector_mode_valid should be changed from
int to enum drm_mode_status.

Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Fixes: 3e87599b68e7 ("drm/msm/mdp4: add LVDS panel support")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/502878/
Link: https://lore.kernel.org/r/20220913205551.155128-1-nhuck@google.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c
index 7288041dd86a..7444b75c4215 100644
--- a/drivers/gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c
+++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c
@@ -56,8 +56,9 @@ static int mdp4_lvds_connector_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
-static int mdp4_lvds_connector_mode_valid(struct drm_connector *connector,
-				 struct drm_display_mode *mode)
+static enum drm_mode_status
+mdp4_lvds_connector_mode_valid(struct drm_connector *connector,
+			       struct drm_display_mode *mode)
 {
 	struct mdp4_lvds_connector *mdp4_lvds_connector =
 			to_mdp4_lvds_connector(connector);
-- 
2.35.1

[PATCH 5.15 059/132] KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test

[Greg Kroah-Hartman]

From: Gavin Shan <gshan@redhat.com>

[ Upstream commit 05c2224d4b049406b0545a10be05280ff4b8ba0a ]

It's required by vm_userspace_mem_region_add() that memory size
should be aligned to host page size. However, one guest page is
provided by memslot_modification_stress_test. It triggers failure
in the scenario of 64KB-page-size-host and 4KB-page-size-guest,
as the following messages indicate.

 # ./memslot_modification_stress_test
 Testing guest mode: PA-bits:40,  VA-bits:48,  4K pages
 guest physical test memory: [0xffbfff0000, 0xffffff0000)
 Finished creating vCPUs
 Started all vCPUs
 ==== Test Assertion Failure ====
   lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages
   pid=5712 tid=5712 errno=0 - Success
      1	0x0000000000404eeb: vm_userspace_mem_region_add at kvm_util.c:822
      2	0x0000000000401a5b: add_remove_memslot at memslot_modification_stress_test.c:82
      3	 (inlined by) run_test at memslot_modification_stress_test.c:110
      4	0x0000000000402417: for_each_guest_mode at guest_modes.c:100
      5	0x00000000004016a7: main at memslot_modification_stress_test.c:187
      6	0x0000ffffb8cd4383: ?? ??:0
      7	0x0000000000401827: _start at :?
   Number of guest pages is not compatible with the host. Try npages=16

Fix the issue by providing 16 guest pages to the memory slot for this
particular combination of 64KB-page-size-host and 4KB-page-size-guest
on aarch64.

Fixes: ef4c9f4f65462 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221013063020.201856-1-gshan@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kvm/memslot_modification_stress_test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/kvm/memslot_modification_stress_test.c b/tools/testing/selftests/kvm/memslot_modification_stress_test.c
index 4cfcafea9f5a..1d806b8ffee2 100644
--- a/tools/testing/selftests/kvm/memslot_modification_stress_test.c
+++ b/tools/testing/selftests/kvm/memslot_modification_stress_test.c
@@ -72,7 +72,7 @@ struct memslot_antagonist_args {
 static void add_remove_memslot(struct kvm_vm *vm, useconds_t delay,
 			       uint64_t nr_modifications)
 {
-	const uint64_t pages = 1;
+	uint64_t pages = max_t(int, vm->page_size, getpagesize()) / vm->page_size;
 	uint64_t gpa;
 	int i;
 
-- 
2.35.1

[PATCH 5.15 060/132] ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile

[Greg Kroah-Hartman]

From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>

[ Upstream commit c9a3545b1d771fb7b06a487796c40288c02c41c5 ]

Update HDMI volatile registers list as DMA, Channel Selection registers,
vbit control registers are being reflected by hardware DP port
disconnection.

This update is required to fix no display and no sound issue observed
after reconnecting TAMA/SANWA DP cables.
Once DP cable is unplugged, DMA control registers are being reset by
hardware, however at second plugin, new dma control values does not
updated to the dma hardware registers since new register value and
cached values at the time of first plugin are same.

Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Link: https://lore.kernel.org/r/1665637711-13300-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/lpass-cpu.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 5e89d280e355..b37f4736ee10 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -779,10 +779,18 @@ static bool lpass_hdmi_regmap_volatile(struct device *dev, unsigned int reg)
 		return true;
 	if (reg == LPASS_HDMI_TX_LEGACY_ADDR(v))
 		return true;
+	if (reg == LPASS_HDMI_TX_VBIT_CTL_ADDR(v))
+		return true;
 
 	for (i = 0; i < v->hdmi_rdma_channels; ++i) {
 		if (reg == LPAIF_HDMI_RDMACURR_REG(v, i))
 			return true;
+		if (reg == LPASS_HDMI_TX_DMA_ADDR(v, i))
+			return true;
+		if (reg == LPASS_HDMI_TX_CH_LSB_ADDR(v, i))
+			return true;
+		if (reg == LPASS_HDMI_TX_CH_MSB_ADDR(v, i))
+			return true;
 	}
 	return false;
 }
-- 
2.35.1

[PATCH 5.15 061/132] perf: Fix missing SIGTRAPs

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit ca6c21327c6af02b7eec31ce4b9a740a18c6c13f ]

Marco reported:

Due to the implementation of how SIGTRAP are delivered if
perf_event_attr::sigtrap is set, we've noticed 3 issues:

  1. Missing SIGTRAP due to a race with event_sched_out() (more
     details below).

  2. Hardware PMU events being disabled due to returning 1 from
     perf_event_overflow(). The only way to re-enable the event is
     for user space to first "properly" disable the event and then
     re-enable it.

  3. The inability to automatically disable an event after a
     specified number of overflows via PERF_EVENT_IOC_REFRESH.

The worst of the 3 issues is problem (1), which occurs when a
pending_disable is "consumed" by a racing event_sched_out(), observed
as follows:

		CPU0			|	CPU1
	--------------------------------+---------------------------
	__perf_event_overflow()		|
	 perf_event_disable_inatomic()	|
	  pending_disable = CPU0	| ...
					| _perf_event_enable()
					|  event_function_call()
					|   task_function_call()
					|    /* sends IPI to CPU0 */
	<IPI>				| ...
	 __perf_event_enable()		+---------------------------
	  ctx_resched()
	   task_ctx_sched_out()
	    ctx_sched_out()
	     group_sched_out()
	      event_sched_out()
	       pending_disable = -1
	</IPI>
	<IRQ-work>
	 perf_pending_event()
	  perf_pending_event_disable()
	   /* Fails to send SIGTRAP because no pending_disable! */
	</IRQ-work>

In the above case, not only is that particular SIGTRAP missed, but also
all future SIGTRAPs because 'event_limit' is not reset back to 1.

To fix, rework pending delivery of SIGTRAP via IRQ-work by introduction
of a separate 'pending_sigtrap', no longer using 'event_limit' and
'pending_disable' for its delivery.

Additionally; and different to Marco's proposed patch:

 - recognise that pending_disable effectively duplicates oncpu for
   the case where it is set. As such, change the irq_work handler to
   use ->oncpu to target the event and use pending_* as boolean toggles.

 - observe that SIGTRAP targets the ctx->task, so the context switch
   optimization that carries contexts between tasks is invalid. If
   the irq_work were delayed enough to hit after a context switch the
   SIGTRAP would be delivered to the wrong task.

 - observe that if the event gets scheduled out
   (rotation/migration/context-switch/...) the irq-work would be
   insufficient to deliver the SIGTRAP when the event gets scheduled
   back in (the irq-work might still be pending on the old CPU).

   Therefore have event_sched_out() convert the pending sigtrap into a
   task_work which will deliver the signal at return_to_user.

Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Debugged-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Marco Elver <elver@google.com>
Debugged-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/perf_event.h  |  19 ++++-
 kernel/events/core.c        | 153 +++++++++++++++++++++++++++---------
 kernel/events/ring_buffer.c |   2 +-
 3 files changed, 130 insertions(+), 44 deletions(-)

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 6cce33e7e7ac..014eb0a963fc 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -723,11 +723,14 @@ struct perf_event {
 	struct fasync_struct		*fasync;
 
 	/* delayed work for NMIs and such */
-	int				pending_wakeup;
-	int				pending_kill;
-	int				pending_disable;
+	unsigned int			pending_wakeup;
+	unsigned int			pending_kill;
+	unsigned int			pending_disable;
+	unsigned int			pending_sigtrap;
 	unsigned long			pending_addr;	/* SIGTRAP */
-	struct irq_work			pending;
+	struct irq_work			pending_irq;
+	struct callback_head		pending_task;
+	unsigned int			pending_work;
 
 	atomic_t			event_limit;
 
@@ -841,6 +844,14 @@ struct perf_event_context {
 #endif
 	void				*task_ctx_data; /* pmu specific data */
 	struct rcu_head			rcu_head;
+
+	/*
+	 * Sum (event->pending_sigtrap + event->pending_work)
+	 *
+	 * The SIGTRAP is targeted at ctx->task, as such it won't do changing
+	 * that until the signal is delivered.
+	 */
+	local_t				nr_pending;
 };
 
 /*
diff --git a/kernel/events/core.c b/kernel/events/core.c
index c6c7a4d80573..59654c737168 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -54,6 +54,7 @@
 #include <linux/highmem.h>
 #include <linux/pgtable.h>
 #include <linux/buildid.h>
+#include <linux/task_work.h>
 
 #include "internal.h"
 
@@ -2352,11 +2353,26 @@ event_sched_out(struct perf_event *event,
 	event->pmu->del(event, 0);
 	event->oncpu = -1;
 
-	if (READ_ONCE(event->pending_disable) >= 0) {
-		WRITE_ONCE(event->pending_disable, -1);
+	if (event->pending_disable) {
+		event->pending_disable = 0;
 		perf_cgroup_event_disable(event, ctx);
 		state = PERF_EVENT_STATE_OFF;
 	}
+
+	if (event->pending_sigtrap) {
+		bool dec = true;
+
+		event->pending_sigtrap = 0;
+		if (state != PERF_EVENT_STATE_OFF &&
+		    !event->pending_work) {
+			event->pending_work = 1;
+			dec = false;
+			task_work_add(current, &event->pending_task, TWA_RESUME);
+		}
+		if (dec)
+			local_dec(&event->ctx->nr_pending);
+	}
+
 	perf_event_set_state(event, state);
 
 	if (!is_software_event(event))
@@ -2508,7 +2524,7 @@ static void __perf_event_disable(struct perf_event *event,
  * hold the top-level event's child_mutex, so any descendant that
  * goes to exit will block in perf_event_exit_event().
  *
- * When called from perf_pending_event it's OK because event->ctx
+ * When called from perf_pending_irq it's OK because event->ctx
  * is the current context on this CPU and preemption is disabled,
  * hence we can't get into perf_event_task_sched_out for this context.
  */
@@ -2547,9 +2563,8 @@ EXPORT_SYMBOL_GPL(perf_event_disable);
 
 void perf_event_disable_inatomic(struct perf_event *event)
 {
-	WRITE_ONCE(event->pending_disable, smp_processor_id());
-	/* can fail, see perf_pending_event_disable() */
-	irq_work_queue(&event->pending);
+	event->pending_disable = 1;
+	irq_work_queue(&event->pending_irq);
 }
 
 #define MAX_INTERRUPTS (~0ULL)
@@ -3506,11 +3521,23 @@ static void perf_event_context_sched_out(struct task_struct *task, int ctxn,
 		raw_spin_lock_nested(&next_ctx->lock, SINGLE_DEPTH_NESTING);
 		if (context_equiv(ctx, next_ctx)) {
 
+			perf_pmu_disable(pmu);
+
+			/* PMIs are disabled; ctx->nr_pending is stable. */
+			if (local_read(&ctx->nr_pending) ||
+			    local_read(&next_ctx->nr_pending)) {
+				/*
+				 * Must not swap out ctx when there's pending
+				 * events that rely on the ctx->task relation.
+				 */
+				raw_spin_unlock(&next_ctx->lock);
+				rcu_read_unlock();
+				goto inside_switch;
+			}
+
 			WRITE_ONCE(ctx->task, next);
 			WRITE_ONCE(next_ctx->task, task);
 
-			perf_pmu_disable(pmu);
-
 			if (cpuctx->sched_cb_usage && pmu->sched_task)
 				pmu->sched_task(ctx, false);
 
@@ -3551,6 +3578,7 @@ static void perf_event_context_sched_out(struct task_struct *task, int ctxn,
 		raw_spin_lock(&ctx->lock);
 		perf_pmu_disable(pmu);
 
+inside_switch:
 		if (cpuctx->sched_cb_usage && pmu->sched_task)
 			pmu->sched_task(ctx, false);
 		task_ctx_sched_out(cpuctx, ctx, EVENT_ALL);
@@ -5030,7 +5058,7 @@ static void perf_addr_filters_splice(struct perf_event *event,
 
 static void _free_event(struct perf_event *event)
 {
-	irq_work_sync(&event->pending);
+	irq_work_sync(&event->pending_irq);
 
 	unaccount_event(event);
 
@@ -6524,7 +6552,8 @@ static void perf_sigtrap(struct perf_event *event)
 		return;
 
 	/*
-	 * perf_pending_event() can race with the task exiting.
+	 * Both perf_pending_task() and perf_pending_irq() can race with the
+	 * task exiting.
 	 */
 	if (current->flags & PF_EXITING)
 		return;
@@ -6533,23 +6562,33 @@ static void perf_sigtrap(struct perf_event *event)
 		      event->attr.type, event->attr.sig_data);
 }
 
-static void perf_pending_event_disable(struct perf_event *event)
+/*
+ * Deliver the pending work in-event-context or follow the context.
+ */
+static void __perf_pending_irq(struct perf_event *event)
 {
-	int cpu = READ_ONCE(event->pending_disable);
+	int cpu = READ_ONCE(event->oncpu);
 
+	/*
+	 * If the event isn't running; we done. event_sched_out() will have
+	 * taken care of things.
+	 */
 	if (cpu < 0)
 		return;
 
+	/*
+	 * Yay, we hit home and are in the context of the event.
+	 */
 	if (cpu == smp_processor_id()) {
-		WRITE_ONCE(event->pending_disable, -1);
-
-		if (event->attr.sigtrap) {
+		if (event->pending_sigtrap) {
+			event->pending_sigtrap = 0;
 			perf_sigtrap(event);
-			atomic_set_release(&event->event_limit, 1); /* rearm event */
-			return;
+			local_dec(&event->ctx->nr_pending);
+		}
+		if (event->pending_disable) {
+			event->pending_disable = 0;
+			perf_event_disable_local(event);
 		}
-
-		perf_event_disable_local(event);
 		return;
 	}
 
@@ -6569,36 +6608,63 @@ static void perf_pending_event_disable(struct perf_event *event)
 	 *				  irq_work_queue(); // FAILS
 	 *
 	 *  irq_work_run()
-	 *    perf_pending_event()
+	 *    perf_pending_irq()
 	 *
 	 * But the event runs on CPU-B and wants disabling there.
 	 */
-	irq_work_queue_on(&event->pending, cpu);
+	irq_work_queue_on(&event->pending_irq, cpu);
 }
 
-static void perf_pending_event(struct irq_work *entry)
+static void perf_pending_irq(struct irq_work *entry)
 {
-	struct perf_event *event = container_of(entry, struct perf_event, pending);
+	struct perf_event *event = container_of(entry, struct perf_event, pending_irq);
 	int rctx;
 
-	rctx = perf_swevent_get_recursion_context();
 	/*
 	 * If we 'fail' here, that's OK, it means recursion is already disabled
 	 * and we won't recurse 'further'.
 	 */
+	rctx = perf_swevent_get_recursion_context();
 
-	perf_pending_event_disable(event);
-
+	/*
+	 * The wakeup isn't bound to the context of the event -- it can happen
+	 * irrespective of where the event is.
+	 */
 	if (event->pending_wakeup) {
 		event->pending_wakeup = 0;
 		perf_event_wakeup(event);
 	}
 
+	__perf_pending_irq(event);
+
 	if (rctx >= 0)
 		perf_swevent_put_recursion_context(rctx);
 }
 
-/*
+static void perf_pending_task(struct callback_head *head)
+{
+	struct perf_event *event = container_of(head, struct perf_event, pending_task);
+	int rctx;
+
+	/*
+	 * If we 'fail' here, that's OK, it means recursion is already disabled
+	 * and we won't recurse 'further'.
+	 */
+	preempt_disable_notrace();
+	rctx = perf_swevent_get_recursion_context();
+
+	if (event->pending_work) {
+		event->pending_work = 0;
+		perf_sigtrap(event);
+		local_dec(&event->ctx->nr_pending);
+	}
+
+	if (rctx >= 0)
+		perf_swevent_put_recursion_context(rctx);
+	preempt_enable_notrace();
+}
+
+/*              
  * We assume there is only KVM supporting the callbacks.
  * Later on, we might change it to a list if there is
  * another virtualization implementation supporting the callbacks.
@@ -9229,8 +9295,8 @@ int perf_event_account_interrupt(struct perf_event *event)
  */
 
 static int __perf_event_overflow(struct perf_event *event,
-				   int throttle, struct perf_sample_data *data,
-				   struct pt_regs *regs)
+				 int throttle, struct perf_sample_data *data,
+				 struct pt_regs *regs)
 {
 	int events = atomic_read(&event->event_limit);
 	int ret = 0;
@@ -9253,24 +9319,36 @@ static int __perf_event_overflow(struct perf_event *event,
 	if (events && atomic_dec_and_test(&event->event_limit)) {
 		ret = 1;
 		event->pending_kill = POLL_HUP;
-		event->pending_addr = data->addr;
-
 		perf_event_disable_inatomic(event);
 	}
 
+	if (event->attr.sigtrap) {
+		/*
+		 * Should not be able to return to user space without processing
+		 * pending_sigtrap (kernel events can overflow multiple times).
+		 */
+		WARN_ON_ONCE(event->pending_sigtrap && event->attr.exclude_kernel);
+		if (!event->pending_sigtrap) {
+			event->pending_sigtrap = 1;
+			local_inc(&event->ctx->nr_pending);
+		}
+		event->pending_addr = data->addr;
+		irq_work_queue(&event->pending_irq);
+	}
+
 	READ_ONCE(event->overflow_handler)(event, data, regs);
 
 	if (*perf_event_fasync(event) && event->pending_kill) {
 		event->pending_wakeup = 1;
-		irq_work_queue(&event->pending);
+		irq_work_queue(&event->pending_irq);
 	}
 
 	return ret;
 }
 
 int perf_event_overflow(struct perf_event *event,
-			  struct perf_sample_data *data,
-			  struct pt_regs *regs)
+			struct perf_sample_data *data,
+			struct pt_regs *regs)
 {
 	return __perf_event_overflow(event, 1, data, regs);
 }
@@ -11576,8 +11654,8 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu,
 
 
 	init_waitqueue_head(&event->waitq);
-	event->pending_disable = -1;
-	init_irq_work(&event->pending, perf_pending_event);
+	init_irq_work(&event->pending_irq, perf_pending_irq);
+	init_task_work(&event->pending_task, perf_pending_task);
 
 	mutex_init(&event->mmap_mutex);
 	raw_spin_lock_init(&event->addr_filters.lock);
@@ -11599,9 +11677,6 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu,
 	if (parent_event)
 		event->event_caps = parent_event->event_caps;
 
-	if (event->attr.sigtrap)
-		atomic_set(&event->event_limit, 1);
-
 	if (task) {
 		event->attach_state = PERF_ATTACH_TASK;
 		/*
diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index fb35b926024c..f40da32f5e75 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -22,7 +22,7 @@ static void perf_output_wakeup(struct perf_output_handle *handle)
 	atomic_set(&handle->rb->poll, EPOLLIN);
 
 	handle->event->pending_wakeup = 1;
-	irq_work_queue(&handle->event->pending);
+	irq_work_queue(&handle->event->pending_irq);
 }
 
 /*
-- 
2.35.1

[PATCH 5.15 062/132] sched/core: Fix comparison in sched_group_cookie_match()

[Greg Kroah-Hartman]

From: Lin Shengwang <linshengwang1@huawei.com>

[ Upstream commit e705968dd687574b6ca3ebe772683d5642759132 ]

In commit 97886d9dcd86 ("sched: Migration changes for core scheduling"),
sched_group_cookie_match() was added to help determine if a cookie
matches the core state.

However, while it iterates the SMT group, it fails to actually use the
RQ for each of the CPUs iterated, use cpu_rq(cpu) instead of rq to fix
things.

Fixes: 97886d9dcd86 ("sched: Migration changes for core scheduling")
Signed-off-by: Lin Shengwang <linshengwang1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221008022709.642-1-linshengwang1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/sched.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index e49902898253..7a3fcd70aa86 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1148,6 +1148,14 @@ static inline bool is_migration_disabled(struct task_struct *p)
 #endif
 }
 
+DECLARE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
+
+#define cpu_rq(cpu)		(&per_cpu(runqueues, (cpu)))
+#define this_rq()		this_cpu_ptr(&runqueues)
+#define task_rq(p)		cpu_rq(task_cpu(p))
+#define cpu_curr(cpu)		(cpu_rq(cpu)->curr)
+#define raw_rq()		raw_cpu_ptr(&runqueues)
+
 struct sched_group;
 #ifdef CONFIG_SCHED_CORE
 static inline struct cpumask *sched_group_span(struct sched_group *sg);
@@ -1235,7 +1243,7 @@ static inline bool sched_group_cookie_match(struct rq *rq,
 		return true;
 
 	for_each_cpu_and(cpu, sched_group_span(group), p->cpus_ptr) {
-		if (sched_core_cookie_match(rq, p))
+		if (sched_core_cookie_match(cpu_rq(cpu), p))
 			return true;
 	}
 	return false;
@@ -1361,14 +1369,6 @@ static inline void update_idle_core(struct rq *rq)
 static inline void update_idle_core(struct rq *rq) { }
 #endif
 
-DECLARE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
-
-#define cpu_rq(cpu)		(&per_cpu(runqueues, (cpu)))
-#define this_rq()		this_cpu_ptr(&runqueues)
-#define task_rq(p)		cpu_rq(task_cpu(p))
-#define cpu_curr(cpu)		(cpu_rq(cpu)->curr)
-#define raw_rq()		raw_cpu_ptr(&runqueues)
-
 #ifdef CONFIG_FAIR_GROUP_SCHED
 static inline struct task_struct *task_of(struct sched_entity *se)
 {
-- 
2.35.1

[PATCH 5.15 063/132] arc: iounmap() arg is volatile

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c44f15c1c09481d50fd33478ebb5b8284f8f5edb ]

Add 'volatile' to iounmap()'s argument to prevent build warnings.
This make it the same as other major architectures.

Placates these warnings: (12 such warnings)

../drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':
../drivers/video/fbdev/riva/fbdev.c:2067:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Werror=discarded-qualifiers]
 2067 |                 iounmap(default_par->riva.PRAMIN);

Fixes: 1162b0701b14b ("ARC: I/O and DMA Mappings")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/include/asm/io.h | 2 +-
 arch/arc/mm/ioremap.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 8f777d6441a5..80347382a380 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -32,7 +32,7 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
+extern void iounmap(const volatile void __iomem *addr);
 
 /*
  * io{read,write}{16,32}be() macros
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 0ee75aca6e10..712c2311daef 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -94,7 +94,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 EXPORT_SYMBOL(ioremap_prot);
 
 
-void iounmap(const void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
-- 
2.35.1

[PATCH 5.15 063/132] arc: iounmap() arg is volatile

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c44f15c1c09481d50fd33478ebb5b8284f8f5edb ]

Add 'volatile' to iounmap()'s argument to prevent build warnings.
This make it the same as other major architectures.

Placates these warnings: (12 such warnings)

../drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':
../drivers/video/fbdev/riva/fbdev.c:2067:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Werror=discarded-qualifiers]
 2067 |                 iounmap(default_par->riva.PRAMIN);

Fixes: 1162b0701b14b ("ARC: I/O and DMA Mappings")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/include/asm/io.h | 2 +-
 arch/arc/mm/ioremap.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 8f777d6441a5..80347382a380 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -32,7 +32,7 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
+extern void iounmap(const volatile void __iomem *addr);
 
 /*
  * io{read,write}{16,32}be() macros
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 0ee75aca6e10..712c2311daef 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -94,7 +94,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 EXPORT_SYMBOL(ioremap_prot);
 
 
-void iounmap(const void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
-- 
2.35.1




_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

[PATCH 5.15 064/132] mtd: rawnand: intel: Add missing of_node_put() in ebu_nand_probe()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 1f3b494d1fc18ebb37aaa47107e9b84bf5b54ff7 ]

The 'chip_np' returned by of_get_next_child() with refcount decremented,
of_node_put() need be called in error path to decrease the refcount.

Fixes: bfc618fcc3f1 ("mtd: rawnand: intel: Read the chip-select line from the correct OF node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220924131010.957117-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/intel-nand-controller.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/raw/intel-nand-controller.c b/drivers/mtd/nand/raw/intel-nand-controller.c
index 056835fd4562..53071e791e17 100644
--- a/drivers/mtd/nand/raw/intel-nand-controller.c
+++ b/drivers/mtd/nand/raw/intel-nand-controller.c
@@ -614,11 +614,12 @@ static int ebu_nand_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(chip_np, "reg", &cs);
 	if (ret) {
 		dev_err(dev, "failed to get chip select: %d\n", ret);
-		return ret;
+		goto err_of_node_put;
 	}
 	if (cs >= MAX_CS) {
 		dev_err(dev, "got invalid chip select: %d\n", cs);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_of_node_put;
 	}
 
 	ebu_host->cs_num = cs;
@@ -627,18 +628,20 @@ static int ebu_nand_probe(struct platform_device *pdev)
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, resname);
 	ebu_host->cs[cs].chipaddr = devm_ioremap_resource(dev, res);
 	if (IS_ERR(ebu_host->cs[cs].chipaddr))
-		return PTR_ERR(ebu_host->cs[cs].chipaddr);
+		goto err_of_node_put;
 	ebu_host->cs[cs].nand_pa = res->start;
 
 	ebu_host->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(ebu_host->clk))
-		return dev_err_probe(dev, PTR_ERR(ebu_host->clk),
-				     "failed to get clock\n");
+	if (IS_ERR(ebu_host->clk)) {
+		ret = dev_err_probe(dev, PTR_ERR(ebu_host->clk),
+				    "failed to get clock\n");
+		goto err_of_node_put;
+	}
 
 	ret = clk_prepare_enable(ebu_host->clk);
 	if (ret) {
 		dev_err(dev, "failed to enable clock: %d\n", ret);
-		return ret;
+		goto err_of_node_put;
 	}
 	ebu_host->clk_rate = clk_get_rate(ebu_host->clk);
 
@@ -703,6 +706,8 @@ static int ebu_nand_probe(struct platform_device *pdev)
 	ebu_dma_cleanup(ebu_host);
 err_disable_unprepare_clk:
 	clk_disable_unprepare(ebu_host->clk);
+err_of_node_put:
+	of_node_put(chip_np);
 
 	return ret;
 }
-- 
2.35.1

[PATCH 5.15 065/132] ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatile

[Greg Kroah-Hartman]

From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>

[ Upstream commit 1dd5166102e7ca91e8c5d833110333835e147ddb ]

Update LPASS_HDMI_TX_PARITY_ADDR register as volatile, to fix
dp audio failures observed with some of external monitors.

Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1665825530-7593-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/lpass-cpu.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index b37f4736ee10..5e8d045c1a06 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -781,6 +781,8 @@ static bool lpass_hdmi_regmap_volatile(struct device *dev, unsigned int reg)
 		return true;
 	if (reg == LPASS_HDMI_TX_VBIT_CTL_ADDR(v))
 		return true;
+	if (reg == LPASS_HDMI_TX_PARITY_ADDR(v))
+		return true;
 
 	for (i = 0; i < v->hdmi_rdma_channels; ++i) {
 		if (reg == LPAIF_HDMI_RDMACURR_REG(v, i))
-- 
2.35.1

[PATCH 5.15 066/132] ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 4881bda5ea05c8c240fc8afeaa928e2bc43f61fa ]

If device_register() fails in snd_ac97_dev_register(), it should
call put_device() to give up reference, or the name allocated in
dev_set_name() is leaked.

Fixes: 0ca06a00e206 ("[ALSA] AC97 bus interface for ad-hoc drivers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019093025.1179475-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/ac97/ac97_codec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index cb60a07d39a8..ceead55f13ab 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -2009,6 +2009,7 @@ static int snd_ac97_dev_register(struct snd_device *device)
 	err = device_register(&ac97->dev);
 	if (err < 0) {
 		ac97_err(ac97, "Can't register ac97 bus\n");
+		put_device(&ac97->dev);
 		ac97->dev.bus = NULL;
 		return err;
 	}
-- 
2.35.1

[PATCH 5.15 067/132] perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()

[Greg Kroah-Hartman]

From: Maxim Levitsky <mlevitsk@redhat.com>

[ Upstream commit b329f5ddc9ce4b622d9c7aaf5c6df4de52caf91a ]

clear_cpu_cap(&boot_cpu_data) is very similar to setup_clear_cpu_cap()
except that the latter also sets a bit in 'cpu_caps_cleared' which
later clears the same cap in secondary cpus, which is likely what is
meant here.

Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20220718141123.136106-2-mlevitsk@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/lbr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 673721387391..b3f92255cbd2 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -1847,7 +1847,7 @@ void __init intel_pmu_arch_lbr_init(void)
 	return;
 
 clear_arch_lbr:
-	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_ARCH_LBR);
+	setup_clear_cpu_cap(X86_FEATURE_ARCH_LBR);
 }
 
 /**
-- 
2.35.1

[PATCH 5.15 068/132] tipc: fix a null-ptr-deref in tipc_topsrv_accept

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 82cb4e4612c633a9ce320e1773114875604a3cce ]

syzbot found a crash in tipc_topsrv_accept:

  KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
  Workqueue: tipc_rcv tipc_topsrv_accept
  RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487
  Call Trace:
   <TASK>
   tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460
   process_one_work+0x991/0x1610 kernel/workqueue.c:2289
   worker_thread+0x665/0x1080 kernel/workqueue.c:2436
   kthread+0x2e4/0x3a0 kernel/kthread.c:376
   ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

It was caused by srv->listener that might be set to null by
tipc_topsrv_stop() in net .exit whereas it's still used in
tipc_topsrv_accept() worker.

srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add
a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to
avoid the null-ptr-deref. To ensure the lsock is not released during the
tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop()
where it's waiting until the tipc_topsrv_accept worker to be done.

Note that sk_callback_lock is used to protect sk->sk_user_data instead of
srv->listener, and it should check srv in tipc_topsrv_listener_data_ready()
instead. This also ensures that no more tipc_topsrv_accept worker will be
started after tipc_conn_close() is called in tipc_topsrv_stop() where it
sets sk->sk_user_data to null.

Fixes: 0ef897be12b8 ("tipc: separate topology server listener socket from subcsriber sockets")
Reported-by: syzbot+c5ce866a8d30f4be0651@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/4eee264380c409c61c6451af1059b7fb271a7e7b.1666120790.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/topsrv.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/net/tipc/topsrv.c b/net/tipc/topsrv.c
index 14fd05fd6107..d92ec92f0b71 100644
--- a/net/tipc/topsrv.c
+++ b/net/tipc/topsrv.c
@@ -450,12 +450,19 @@ static void tipc_conn_data_ready(struct sock *sk)
 static void tipc_topsrv_accept(struct work_struct *work)
 {
 	struct tipc_topsrv *srv = container_of(work, struct tipc_topsrv, awork);
-	struct socket *lsock = srv->listener;
-	struct socket *newsock;
+	struct socket *newsock, *lsock;
 	struct tipc_conn *con;
 	struct sock *newsk;
 	int ret;
 
+	spin_lock_bh(&srv->idr_lock);
+	if (!srv->listener) {
+		spin_unlock_bh(&srv->idr_lock);
+		return;
+	}
+	lsock = srv->listener;
+	spin_unlock_bh(&srv->idr_lock);
+
 	while (1) {
 		ret = kernel_accept(lsock, &newsock, O_NONBLOCK);
 		if (ret < 0)
@@ -489,7 +496,7 @@ static void tipc_topsrv_listener_data_ready(struct sock *sk)
 
 	read_lock_bh(&sk->sk_callback_lock);
 	srv = sk->sk_user_data;
-	if (srv->listener)
+	if (srv)
 		queue_work(srv->rcv_wq, &srv->awork);
 	read_unlock_bh(&sk->sk_callback_lock);
 }
@@ -699,8 +706,9 @@ static void tipc_topsrv_stop(struct net *net)
 	__module_get(lsock->sk->sk_prot_creator->owner);
 	srv->listener = NULL;
 	spin_unlock_bh(&srv->idr_lock);
-	sock_release(lsock);
+
 	tipc_topsrv_work_stop(srv);
+	sock_release(lsock);
 	idr_destroy(&srv->conn_idr);
 	kfree(srv);
 }
-- 
2.35.1

[PATCH 5.15 069/132] net: netsec: fix error handling in netsec_register_mdio()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 94423589689124e8cd145b38a1034be7f25835b2 ]

If phy_device_register() fails, phy_device_free() need be called to
put refcount, so memory of phy device and device name can be freed
in callback function.

If get_phy_device() fails, mdiobus_unregister() need be called,
or it will cause warning in mdiobus_free() and kobject is leaked.

Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019064104.3228892-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/socionext/netsec.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index 1f46af136aa8..f0451911ab8f 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -1964,11 +1964,13 @@ static int netsec_register_mdio(struct netsec_priv *priv, u32 phy_addr)
 			ret = PTR_ERR(priv->phydev);
 			dev_err(priv->dev, "get_phy_device err(%d)\n", ret);
 			priv->phydev = NULL;
+			mdiobus_unregister(bus);
 			return -ENODEV;
 		}
 
 		ret = phy_device_register(priv->phydev);
 		if (ret) {
+			phy_device_free(priv->phydev);
 			mdiobus_unregister(bus);
 			dev_err(priv->dev,
 				"phy_device_register err(%d)\n", ret);
-- 
2.35.1

[PATCH 5.15 070/132] net: hinic: fix incorrect assignment issue in hinic_set_interrupt_cfg()

[Greg Kroah-Hartman]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit c0605cd6750f2db9890c43a91ea4d77be8fb4908 ]

The value of lli_credit_cnt is incorrectly assigned, fix it.

Fixes: a0337c0dee68 ("hinic: add support to set and get irq coalesce")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
index ca76896d9f1c..8b04d133b3c4 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
@@ -892,7 +892,7 @@ int hinic_set_interrupt_cfg(struct hinic_hwdev *hwdev,
 	if (err)
 		return -EINVAL;
 
-	interrupt_info->lli_credit_cnt = temp_info.lli_timer_cnt;
+	interrupt_info->lli_credit_cnt = temp_info.lli_credit_cnt;
 	interrupt_info->lli_timer_cnt = temp_info.lli_timer_cnt;
 
 	err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
-- 
2.35.1

[PATCH 5.15 071/132] net: hinic: fix memory leak when reading function table

[Greg Kroah-Hartman]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit 4c1f602df8956bc0decdafd7e4fc7eef50c550b1 ]

When the input parameter idx meets the expected case option in
hinic_dbg_get_func_table(), read_data is not released. Fix it.

Fixes: 5215e16244ee ("hinic: add support to query function table")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/huawei/hinic/hinic_debugfs.c  | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_debugfs.c b/drivers/net/ethernet/huawei/hinic/hinic_debugfs.c
index 19eb839177ec..061952c6c21a 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_debugfs.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_debugfs.c
@@ -85,6 +85,7 @@ static int hinic_dbg_get_func_table(struct hinic_dev *nic_dev, int idx)
 	struct tag_sml_funcfg_tbl *funcfg_table_elem;
 	struct hinic_cmd_lt_rd *read_data;
 	u16 out_size = sizeof(*read_data);
+	int ret = ~0;
 	int err;
 
 	read_data = kzalloc(sizeof(*read_data), GFP_KERNEL);
@@ -111,20 +112,25 @@ static int hinic_dbg_get_func_table(struct hinic_dev *nic_dev, int idx)
 
 	switch (idx) {
 	case VALID:
-		return funcfg_table_elem->dw0.bs.valid;
+		ret = funcfg_table_elem->dw0.bs.valid;
+		break;
 	case RX_MODE:
-		return funcfg_table_elem->dw0.bs.nic_rx_mode;
+		ret = funcfg_table_elem->dw0.bs.nic_rx_mode;
+		break;
 	case MTU:
-		return funcfg_table_elem->dw1.bs.mtu;
+		ret = funcfg_table_elem->dw1.bs.mtu;
+		break;
 	case RQ_DEPTH:
-		return funcfg_table_elem->dw13.bs.cfg_rq_depth;
+		ret = funcfg_table_elem->dw13.bs.cfg_rq_depth;
+		break;
 	case QUEUE_NUM:
-		return funcfg_table_elem->dw13.bs.cfg_q_num;
+		ret = funcfg_table_elem->dw13.bs.cfg_q_num;
+		break;
 	}
 
 	kfree(read_data);
 
-	return ~0;
+	return ret;
 }
 
 static ssize_t hinic_dbg_cmd_read(struct file *filp, char __user *buffer, size_t count,
-- 
2.35.1

[PATCH 5.15 072/132] net: hinic: fix the issue of CMDQ memory leaks

[Greg Kroah-Hartman]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit 363cc87767f6ddcfb9158ad2e2afa2f8d5c4b94e ]

When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is
not released correctly. Fix it.

Fixes: 72ef908bb3ff ("hinic: add three net_device_ops of vf")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
index a627237f694b..afa816cfcdf4 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
@@ -929,7 +929,7 @@ int hinic_init_cmdqs(struct hinic_cmdqs *cmdqs, struct hinic_hwif *hwif,
 
 err_set_cmdq_depth:
 	hinic_ceq_unregister_cb(&func_to_io->ceqs, HINIC_CEQ_CMDQ);
-
+	free_cmdq(&cmdqs->cmdq[HINIC_CMDQ_SYNC]);
 err_cmdq_ctxt:
 	hinic_wqs_cmdq_free(&cmdqs->cmdq_pages, cmdqs->saved_wqs,
 			    HINIC_MAX_CMDQ_TYPES);
-- 
2.35.1

[PATCH 5.15 073/132] net: hinic: fix the issue of double release MBOX callback of VF

[Greg Kroah-Hartman]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit 8ec2f4c6b2e11a4249bba77460f0cfe6d95a82f8 ]

In hinic_vf_func_init(), if VF fails to register information with PF
through the MBOX, the MBOX callback function of VF is released once. But
it is released again in hinic_init_hwdev(). Remove one.

Fixes: 7dd29ee12865 ("hinic: add sriov feature support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/huawei/hinic/hinic_sriov.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
index a78c398bf5b2..e81a7b28209b 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
@@ -1180,7 +1180,6 @@ int hinic_vf_func_init(struct hinic_hwdev *hwdev)
 			dev_err(&hwdev->hwif->pdev->dev,
 				"Failed to register VF, err: %d, status: 0x%x, out size: 0x%x\n",
 				err, register_info.status, out_size);
-			hinic_unregister_vf_mbox_cb(hwdev, HINIC_MOD_L2NIC);
 			return -EIO;
 		}
 	} else {
-- 
2.35.1

[PATCH 5.15 074/132] net: macb: Specify PHY PM management done by MAC

[Greg Kroah-Hartman]

From: Sergiu Moga <sergiu.moga@microchip.com>

[ Upstream commit 15a9dbec631cd69dfbbfc4e2cbf90c9dd8432a8f ]

The `macb_resume`/`macb_suspend` methods already call the
`phylink_start`/`phylink_stop` methods during their execution so
explicitly say that the PM of the PHY is done by MAC by using the
`mac_managed_pm` flag of the `struct phylink_config`.

This also fixes the warning message issued during resume:
WARNING: CPU: 0 PID: 237 at drivers/net/phy/phy_device.c:323 mdio_bus_phy_resume+0x144/0x148

Depends-on: 96de900ae78e ("net: phylink: add mac_managed_pm in phylink_config structure")
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221019120929.63098-1-sergiu.moga@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 3ca3f9d0fd9b..61efb2350412 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -880,6 +880,7 @@ static int macb_mii_probe(struct net_device *dev)
 
 	bp->phylink_config.dev = &dev->dev;
 	bp->phylink_config.type = PHYLINK_NETDEV;
+	bp->phylink_config.mac_managed_pm = true;
 
 	if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
 		bp->phylink_config.poll_fixed_state = true;
-- 
2.35.1

[PATCH 5.15 075/132] nfc: virtual_ncidev: Fix memory leak in virtual_nci_send()

[Greg Kroah-Hartman]

From: Shang XiaoJing <shangxiaojing@huawei.com>

[ Upstream commit e840d8f4a1b323973052a1af5ad4edafcde8ae3d ]

skb should be free in virtual_nci_send(), otherwise kmemleak will report
memleak.

Steps for reproduction (simulated in qemu):
	cd tools/testing/selftests/nci
	make
	./nci_dev

BUG: memory leak
unreferenced object 0xffff888107588000 (size 208):
  comm "nci_dev", pid 206, jiffies 4294945376 (age 368.248s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000008d94c8fd>] __alloc_skb+0x1da/0x290
    [<00000000278bc7f8>] nci_send_cmd+0xa3/0x350
    [<0000000081256a22>] nci_reset_req+0x6b/0xa0
    [<000000009e721112>] __nci_request+0x90/0x250
    [<000000005d556e59>] nci_dev_up+0x217/0x5b0
    [<00000000e618ce62>] nfc_dev_up+0x114/0x220
    [<00000000981e226b>] nfc_genl_dev_up+0x94/0xe0
    [<000000009bb03517>] genl_family_rcv_msg_doit.isra.14+0x228/0x2d0
    [<00000000b7f8c101>] genl_rcv_msg+0x35c/0x640
    [<00000000c94075ff>] netlink_rcv_skb+0x11e/0x350
    [<00000000440cfb1e>] genl_rcv+0x24/0x40
    [<0000000062593b40>] netlink_unicast+0x43f/0x640
    [<000000001d0b13cc>] netlink_sendmsg+0x73a/0xbf0
    [<000000003272487f>] __sys_sendto+0x324/0x370
    [<00000000ef9f1747>] __x64_sys_sendto+0xdd/0x1b0
    [<000000001e437841>] do_syscall_64+0x3f/0x90

Fixes: e624e6c3e777 ("nfc: Add a virtual nci device driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221020030505.15572-1-shangxiaojing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/virtual_ncidev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/nfc/virtual_ncidev.c b/drivers/nfc/virtual_ncidev.c
index 221fa3bb8705..6317e8505aaa 100644
--- a/drivers/nfc/virtual_ncidev.c
+++ b/drivers/nfc/virtual_ncidev.c
@@ -54,16 +54,19 @@ static int virtual_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
 	mutex_lock(&nci_mutex);
 	if (state != virtual_ncidev_enabled) {
 		mutex_unlock(&nci_mutex);
+		kfree_skb(skb);
 		return 0;
 	}
 
 	if (send_buff) {
 		mutex_unlock(&nci_mutex);
+		kfree_skb(skb);
 		return -1;
 	}
 	send_buff = skb_copy(skb, GFP_KERNEL);
 	mutex_unlock(&nci_mutex);
 	wake_up_interruptible(&wq);
+	consume_skb(skb);
 
 	return 0;
 }
-- 
2.35.1

[PATCH 5.15 076/132] x86/unwind/orc: Fix unreliable stack dump with gcov

[Greg Kroah-Hartman]

From: Chen Zhongjin <chenzhongjin@huawei.com>

[ Upstream commit 230db82413c091bc16acee72650f48d419cebe49 ]

When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL
enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder,
causing the stack trace to show all text addresses as unreliable:

  # echo l > /proc/sysrq-trigger
  [  477.521031] sysrq: Show backtrace of all active CPUs
  [  477.523813] NMI backtrace for cpu 0
  [  477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65
  [  477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
  [  477.526439] Call Trace:
  [  477.526854]  <TASK>
  [  477.527216]  ? dump_stack_lvl+0xc7/0x114
  [  477.527801]  ? dump_stack+0x13/0x1f
  [  477.528331]  ? nmi_cpu_backtrace.cold+0xb5/0x10d
  [  477.528998]  ? lapic_can_unplug_cpu+0xa0/0xa0
  [  477.529641]  ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0
  [  477.530393]  ? arch_trigger_cpumask_backtrace+0x1d/0x30
  [  477.531136]  ? sysrq_handle_showallcpus+0x1b/0x30
  [  477.531818]  ? __handle_sysrq.cold+0x4e/0x1ae
  [  477.532451]  ? write_sysrq_trigger+0x63/0x80
  [  477.533080]  ? proc_reg_write+0x92/0x110
  [  477.533663]  ? vfs_write+0x174/0x530
  [  477.534265]  ? handle_mm_fault+0x16f/0x500
  [  477.534940]  ? ksys_write+0x7b/0x170
  [  477.535543]  ? __x64_sys_write+0x1d/0x30
  [  477.536191]  ? do_syscall_64+0x6b/0x100
  [  477.536809]  ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
  [  477.537609]  </TASK>

This happens when the compiled code for show_stack() has a single word
on the stack, and doesn't use a tail call to show_stack_log_lvl().
(CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.)  Then the
__unwind_start() skip logic hits an off-by-one bug and fails to unwind
all the way to the intended starting frame.

Fix it by reverting the following commit:

  f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")

The original justification for that commit no longer exists.  That
original issue was later fixed in a different way, with the following
commit:

  f2ac57a4c49d ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels")

Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
[jpoimboe: rewrite commit log]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/unwind_orc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c
index 3423aaea4ad8..8488966da5f1 100644
--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -700,7 +700,7 @@ void __unwind_start(struct unwind_state *state, struct task_struct *task,
 	/* Otherwise, skip ahead to the user-specified starting frame: */
 	while (!unwind_done(state) &&
 	       (!on_stack(&state->stack_info, first_frame, sizeof(long)) ||
-			state->sp < (unsigned long)first_frame))
+			state->sp <= (unsigned long)first_frame))
 		unwind_next_frame(state);
 
 	return;
-- 
2.35.1

[PATCH 5.15 077/132] amd-xgbe: fix the SFP compliance codes check for DAC cables

[Greg Kroah-Hartman]

From: Raju Rangoju <Raju.Rangoju@amd.com>

[ Upstream commit 09c5f6bf11ac98874339e55f4f5f79a9dbc9b375 ]

The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive)
cables is NULL. However, some cables (the 5 meter and 7 meter Molex
passive cables) have non-zero data at offset 6. Fix the logic by moving
the passive cable check above the active checks, so as not to be
improperly identified as an active cable. This will fix the issue for
any passive cable that advertises 1000Base-CX in offset 6.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 213769054391..21e38b720d87 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1151,7 +1151,10 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata)
 	}
 
 	/* Determine the type of SFP */
-	if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR)
+	if (phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE &&
+	    xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000))
+		phy_data->sfp_base = XGBE_SFP_BASE_10000_CR;
+	else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR)
 		phy_data->sfp_base = XGBE_SFP_BASE_10000_SR;
 	else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_LR)
 		phy_data->sfp_base = XGBE_SFP_BASE_10000_LR;
@@ -1167,9 +1170,6 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata)
 		phy_data->sfp_base = XGBE_SFP_BASE_1000_CX;
 	else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_T)
 		phy_data->sfp_base = XGBE_SFP_BASE_1000_T;
-	else if ((phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE) &&
-		 xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000))
-		phy_data->sfp_base = XGBE_SFP_BASE_10000_CR;
 
 	switch (phy_data->sfp_base) {
 	case XGBE_SFP_BASE_1000_T:
-- 
2.35.1

[PATCH 5.15 078/132] amd-xgbe: add the bit rate quirk for Molex cables

[Greg Kroah-Hartman]

From: Raju Rangoju <Raju.Rangoju@amd.com>

[ Upstream commit 170a9e341a3b02c0b2ea0df16ef14a33a4f41de8 ]

The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected
to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex
passive cables have the rate ceiling 0x78 at offset 12.

Add a quirk for Molex passive cables to extend the rate ceiling to 0x78.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 21e38b720d87..a7166cd1179f 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -239,6 +239,7 @@ enum xgbe_sfp_speed {
 #define XGBE_SFP_BASE_BR_1GBE_MAX		0x0d
 #define XGBE_SFP_BASE_BR_10GBE_MIN		0x64
 #define XGBE_SFP_BASE_BR_10GBE_MAX		0x68
+#define XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX	0x78
 
 #define XGBE_SFP_BASE_CU_CABLE_LEN		18
 
@@ -284,6 +285,8 @@ struct xgbe_sfp_eeprom {
 #define XGBE_BEL_FUSE_VENDOR	"BEL-FUSE        "
 #define XGBE_BEL_FUSE_PARTNO	"1GBT-SFP06      "
 
+#define XGBE_MOLEX_VENDOR	"Molex Inc.      "
+
 struct xgbe_sfp_ascii {
 	union {
 		char vendor[XGBE_SFP_BASE_VENDOR_NAME_LEN + 1];
@@ -834,7 +837,11 @@ static bool xgbe_phy_sfp_bit_rate(struct xgbe_sfp_eeprom *sfp_eeprom,
 		break;
 	case XGBE_SFP_SPEED_10000:
 		min = XGBE_SFP_BASE_BR_10GBE_MIN;
-		max = XGBE_SFP_BASE_BR_10GBE_MAX;
+		if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME],
+			   XGBE_MOLEX_VENDOR, XGBE_SFP_BASE_VENDOR_NAME_LEN) == 0)
+			max = XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX;
+		else
+			max = XGBE_SFP_BASE_BR_10GBE_MAX;
 		break;
 	default:
 		return false;
-- 
2.35.1

[PATCH 5.15 079/132] drm/i915/dp: Reset frl trained flag before restarting FRL training

[Greg Kroah-Hartman]

From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

[ Upstream commit 63720a561b3c98199adf0c73e152807f15cc3b7f ]

For cases where DP has HDMI2.1 sink and FRL Link issues are detected,
reset the flag to state FRL trained status before restarting FRL
training.

Fixes: 9488a030ac91 ("drm/i915: Add support for enabling link status and recovery")
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com> (v2)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011063447.904649-2-ankit.k.nautiyal@intel.com
(cherry picked from commit 47e1a59e60c688c5f95b67277202f05b7e84c189)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index f87e4d510ea5..1ccdf2da042b 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3497,6 +3497,8 @@ intel_dp_handle_hdmi_link_status_change(struct intel_dp *intel_dp)
 
 		drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, &intel_dp->attached_connector->base);
 
+		intel_dp->frl.is_trained = false;
+
 		/* Restart FRL training or fall back to TMDS mode */
 		intel_dp_check_frl_training(intel_dp);
 	}
-- 
2.35.1

[PATCH 5.15 080/132] atlantic: fix deadlock at aq_nic_stop

[Greg Kroah-Hartman]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit 6960d133f66ecddcd3af2b1cbd0c7dcd104268b8 ]

NIC is stopped with rtnl_lock held, and during the stop it cancels the
'service_task' work and free irqs.

However, if CONFIG_MACSEC is set, rtnl_lock is acquired both from
aq_nic_service_task and aq_linkstate_threaded_isr. Then a deadlock
happens if aq_nic_stop tries to cancel/disable them when they've already
started their execution.

As the deadlock is caused by rtnl_lock, it causes many other processes
to stall, not only atlantic related stuff.

Fix it by introducing a mutex that protects each NIC's macsec related
data, and locking it instead of the rtnl_lock from the service task and
the threaded IRQ.

Before this patch, all macsec data was protected with rtnl_lock, but
maybe not all of it needs to be protected. With this new mutex, further
efforts can be made to limit the protected data only to that which
requires it. However, probably it doesn't worth it because all macsec's
data accesses are infrequent, and almost all are done from macsec_ops
or ethtool callbacks, called holding rtnl_lock, so macsec_mutex won't
never be much contended.

The issue appeared repeteadly attaching and deattaching the NIC to a
bond interface. Doing that after this patch I cannot reproduce the bug.

Fixes: 62c1c2e606f6 ("net: atlantic: MACSec offload skeleton")
Reported-by: Li Liang <liali@redhat.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/aquantia/atlantic/aq_macsec.c    | 96 ++++++++++++++-----
 .../net/ethernet/aquantia/atlantic/aq_nic.h   |  2 +
 2 files changed, 74 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_macsec.c b/drivers/net/ethernet/aquantia/atlantic/aq_macsec.c
index 4a6dfac857ca..7c6e0811f2e6 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_macsec.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_macsec.c
@@ -1451,26 +1451,57 @@ static void aq_check_txsa_expiration(struct aq_nic_s *nic)
 			egress_sa_threshold_expired);
 }
 
+#define AQ_LOCKED_MDO_DEF(mdo)						\
+static int aq_locked_mdo_##mdo(struct macsec_context *ctx)		\
+{									\
+	struct aq_nic_s *nic = netdev_priv(ctx->netdev);		\
+	int ret;							\
+	mutex_lock(&nic->macsec_mutex);					\
+	ret = aq_mdo_##mdo(ctx);					\
+	mutex_unlock(&nic->macsec_mutex);				\
+	return ret;							\
+}
+
+AQ_LOCKED_MDO_DEF(dev_open)
+AQ_LOCKED_MDO_DEF(dev_stop)
+AQ_LOCKED_MDO_DEF(add_secy)
+AQ_LOCKED_MDO_DEF(upd_secy)
+AQ_LOCKED_MDO_DEF(del_secy)
+AQ_LOCKED_MDO_DEF(add_rxsc)
+AQ_LOCKED_MDO_DEF(upd_rxsc)
+AQ_LOCKED_MDO_DEF(del_rxsc)
+AQ_LOCKED_MDO_DEF(add_rxsa)
+AQ_LOCKED_MDO_DEF(upd_rxsa)
+AQ_LOCKED_MDO_DEF(del_rxsa)
+AQ_LOCKED_MDO_DEF(add_txsa)
+AQ_LOCKED_MDO_DEF(upd_txsa)
+AQ_LOCKED_MDO_DEF(del_txsa)
+AQ_LOCKED_MDO_DEF(get_dev_stats)
+AQ_LOCKED_MDO_DEF(get_tx_sc_stats)
+AQ_LOCKED_MDO_DEF(get_tx_sa_stats)
+AQ_LOCKED_MDO_DEF(get_rx_sc_stats)
+AQ_LOCKED_MDO_DEF(get_rx_sa_stats)
+
 const struct macsec_ops aq_macsec_ops = {
-	.mdo_dev_open = aq_mdo_dev_open,
-	.mdo_dev_stop = aq_mdo_dev_stop,
-	.mdo_add_secy = aq_mdo_add_secy,
-	.mdo_upd_secy = aq_mdo_upd_secy,
-	.mdo_del_secy = aq_mdo_del_secy,
-	.mdo_add_rxsc = aq_mdo_add_rxsc,
-	.mdo_upd_rxsc = aq_mdo_upd_rxsc,
-	.mdo_del_rxsc = aq_mdo_del_rxsc,
-	.mdo_add_rxsa = aq_mdo_add_rxsa,
-	.mdo_upd_rxsa = aq_mdo_upd_rxsa,
-	.mdo_del_rxsa = aq_mdo_del_rxsa,
-	.mdo_add_txsa = aq_mdo_add_txsa,
-	.mdo_upd_txsa = aq_mdo_upd_txsa,
-	.mdo_del_txsa = aq_mdo_del_txsa,
-	.mdo_get_dev_stats = aq_mdo_get_dev_stats,
-	.mdo_get_tx_sc_stats = aq_mdo_get_tx_sc_stats,
-	.mdo_get_tx_sa_stats = aq_mdo_get_tx_sa_stats,
-	.mdo_get_rx_sc_stats = aq_mdo_get_rx_sc_stats,
-	.mdo_get_rx_sa_stats = aq_mdo_get_rx_sa_stats,
+	.mdo_dev_open = aq_locked_mdo_dev_open,
+	.mdo_dev_stop = aq_locked_mdo_dev_stop,
+	.mdo_add_secy = aq_locked_mdo_add_secy,
+	.mdo_upd_secy = aq_locked_mdo_upd_secy,
+	.mdo_del_secy = aq_locked_mdo_del_secy,
+	.mdo_add_rxsc = aq_locked_mdo_add_rxsc,
+	.mdo_upd_rxsc = aq_locked_mdo_upd_rxsc,
+	.mdo_del_rxsc = aq_locked_mdo_del_rxsc,
+	.mdo_add_rxsa = aq_locked_mdo_add_rxsa,
+	.mdo_upd_rxsa = aq_locked_mdo_upd_rxsa,
+	.mdo_del_rxsa = aq_locked_mdo_del_rxsa,
+	.mdo_add_txsa = aq_locked_mdo_add_txsa,
+	.mdo_upd_txsa = aq_locked_mdo_upd_txsa,
+	.mdo_del_txsa = aq_locked_mdo_del_txsa,
+	.mdo_get_dev_stats = aq_locked_mdo_get_dev_stats,
+	.mdo_get_tx_sc_stats = aq_locked_mdo_get_tx_sc_stats,
+	.mdo_get_tx_sa_stats = aq_locked_mdo_get_tx_sa_stats,
+	.mdo_get_rx_sc_stats = aq_locked_mdo_get_rx_sc_stats,
+	.mdo_get_rx_sa_stats = aq_locked_mdo_get_rx_sa_stats,
 };
 
 int aq_macsec_init(struct aq_nic_s *nic)
@@ -1492,6 +1523,7 @@ int aq_macsec_init(struct aq_nic_s *nic)
 
 	nic->ndev->features |= NETIF_F_HW_MACSEC;
 	nic->ndev->macsec_ops = &aq_macsec_ops;
+	mutex_init(&nic->macsec_mutex);
 
 	return 0;
 }
@@ -1515,7 +1547,7 @@ int aq_macsec_enable(struct aq_nic_s *nic)
 	if (!nic->macsec_cfg)
 		return 0;
 
-	rtnl_lock();
+	mutex_lock(&nic->macsec_mutex);
 
 	if (nic->aq_fw_ops->send_macsec_req) {
 		struct macsec_cfg_request cfg = { 0 };
@@ -1564,7 +1596,7 @@ int aq_macsec_enable(struct aq_nic_s *nic)
 	ret = aq_apply_macsec_cfg(nic);
 
 unlock:
-	rtnl_unlock();
+	mutex_unlock(&nic->macsec_mutex);
 	return ret;
 }
 
@@ -1576,9 +1608,9 @@ void aq_macsec_work(struct aq_nic_s *nic)
 	if (!netif_carrier_ok(nic->ndev))
 		return;
 
-	rtnl_lock();
+	mutex_lock(&nic->macsec_mutex);
 	aq_check_txsa_expiration(nic);
-	rtnl_unlock();
+	mutex_unlock(&nic->macsec_mutex);
 }
 
 int aq_macsec_rx_sa_cnt(struct aq_nic_s *nic)
@@ -1589,21 +1621,30 @@ int aq_macsec_rx_sa_cnt(struct aq_nic_s *nic)
 	if (!cfg)
 		return 0;
 
+	mutex_lock(&nic->macsec_mutex);
+
 	for (i = 0; i < AQ_MACSEC_MAX_SC; i++) {
 		if (!test_bit(i, &cfg->rxsc_idx_busy))
 			continue;
 		cnt += hweight_long(cfg->aq_rxsc[i].rx_sa_idx_busy);
 	}
 
+	mutex_unlock(&nic->macsec_mutex);
 	return cnt;
 }
 
 int aq_macsec_tx_sc_cnt(struct aq_nic_s *nic)
 {
+	int cnt;
+
 	if (!nic->macsec_cfg)
 		return 0;
 
-	return hweight_long(nic->macsec_cfg->txsc_idx_busy);
+	mutex_lock(&nic->macsec_mutex);
+	cnt = hweight_long(nic->macsec_cfg->txsc_idx_busy);
+	mutex_unlock(&nic->macsec_mutex);
+
+	return cnt;
 }
 
 int aq_macsec_tx_sa_cnt(struct aq_nic_s *nic)
@@ -1614,12 +1655,15 @@ int aq_macsec_tx_sa_cnt(struct aq_nic_s *nic)
 	if (!cfg)
 		return 0;
 
+	mutex_lock(&nic->macsec_mutex);
+
 	for (i = 0; i < AQ_MACSEC_MAX_SC; i++) {
 		if (!test_bit(i, &cfg->txsc_idx_busy))
 			continue;
 		cnt += hweight_long(cfg->aq_txsc[i].tx_sa_idx_busy);
 	}
 
+	mutex_unlock(&nic->macsec_mutex);
 	return cnt;
 }
 
@@ -1691,6 +1735,8 @@ u64 *aq_macsec_get_stats(struct aq_nic_s *nic, u64 *data)
 	if (!cfg)
 		return data;
 
+	mutex_lock(&nic->macsec_mutex);
+
 	aq_macsec_update_stats(nic);
 
 	common_stats = &cfg->stats;
@@ -1773,5 +1819,7 @@ u64 *aq_macsec_get_stats(struct aq_nic_s *nic, u64 *data)
 
 	data += i;
 
+	mutex_unlock(&nic->macsec_mutex);
+
 	return data;
 }
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
index 1a7148041e3d..b7f7d6f66633 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
@@ -154,6 +154,8 @@ struct aq_nic_s {
 	struct mutex fwreq_mutex;
 #if IS_ENABLED(CONFIG_MACSEC)
 	struct aq_macsec_cfg *macsec_cfg;
+	/* mutex to protect data in macsec_cfg */
+	struct mutex macsec_mutex;
 #endif
 	/* PTP support */
 	struct aq_ptp_s *aq_ptp;
-- 
2.35.1

[PATCH 5.15 081/132] kcm: annotate data-races around kcm->rx_psock

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 15e4dabda11b0fa31d510a915d1a580f47dfc92e ]

kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.

We do the same for kcm->rx_wait in the following patch.

syzbot reported:
BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm

write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1:
unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313
kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

read to 0xffff888123d827b8 of 8 bytes by task 5859 on cpu 0:
kcm_rfree+0x14c/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffff88812971ce00 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7c68b-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/kcm/kcmsock.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index f780fbe82e7d..2e8990036ec4 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -177,7 +177,7 @@ static void kcm_rfree(struct sk_buff *skb)
 	/* For reading rx_wait and rx_psock without holding lock */
 	smp_mb__after_atomic();
 
-	if (!kcm->rx_wait && !kcm->rx_psock &&
+	if (!kcm->rx_wait && !READ_ONCE(kcm->rx_psock) &&
 	    sk_rmem_alloc_get(sk) < sk->sk_rcvlowat) {
 		spin_lock_bh(&mux->rx_lock);
 		kcm_rcv_ready(kcm);
@@ -282,7 +282,8 @@ static struct kcm_sock *reserve_rx_kcm(struct kcm_psock *psock,
 	kcm->rx_wait = false;
 
 	psock->rx_kcm = kcm;
-	kcm->rx_psock = psock;
+	/* paired with lockless reads in kcm_rfree() */
+	WRITE_ONCE(kcm->rx_psock, psock);
 
 	spin_unlock_bh(&mux->rx_lock);
 
@@ -309,7 +310,8 @@ static void unreserve_rx_kcm(struct kcm_psock *psock,
 	spin_lock_bh(&mux->rx_lock);
 
 	psock->rx_kcm = NULL;
-	kcm->rx_psock = NULL;
+	/* paired with lockless reads in kcm_rfree() */
+	WRITE_ONCE(kcm->rx_psock, NULL);
 
 	/* Commit kcm->rx_psock before sk_rmem_alloc_get to sync with
 	 * kcm_rfree
-- 
2.35.1

[PATCH 5.15 082/132] kcm: annotate data-races around kcm->rx_wait

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 0c745b5141a45a076f1cb9772a399f7ebcb0948a ]

kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.

syzbot reported:

BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree

write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1:
reserve_rx_kcm net/kcm/kcmsock.c:283 [inline]
kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0:
kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x01 -> 0x00

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/kcm/kcmsock.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index 2e8990036ec4..ff6dd2619f22 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -161,7 +161,8 @@ static void kcm_rcv_ready(struct kcm_sock *kcm)
 	/* Buffer limit is okay now, add to ready list */
 	list_add_tail(&kcm->wait_rx_list,
 		      &kcm->mux->kcm_rx_waiters);
-	kcm->rx_wait = true;
+	/* paired with lockless reads in kcm_rfree() */
+	WRITE_ONCE(kcm->rx_wait, true);
 }
 
 static void kcm_rfree(struct sk_buff *skb)
@@ -177,7 +178,7 @@ static void kcm_rfree(struct sk_buff *skb)
 	/* For reading rx_wait and rx_psock without holding lock */
 	smp_mb__after_atomic();
 
-	if (!kcm->rx_wait && !READ_ONCE(kcm->rx_psock) &&
+	if (!READ_ONCE(kcm->rx_wait) && !READ_ONCE(kcm->rx_psock) &&
 	    sk_rmem_alloc_get(sk) < sk->sk_rcvlowat) {
 		spin_lock_bh(&mux->rx_lock);
 		kcm_rcv_ready(kcm);
@@ -236,7 +237,8 @@ static void requeue_rx_msgs(struct kcm_mux *mux, struct sk_buff_head *head)
 		if (kcm_queue_rcv_skb(&kcm->sk, skb)) {
 			/* Should mean socket buffer full */
 			list_del(&kcm->wait_rx_list);
-			kcm->rx_wait = false;
+			/* paired with lockless reads in kcm_rfree() */
+			WRITE_ONCE(kcm->rx_wait, false);
 
 			/* Commit rx_wait to read in kcm_free */
 			smp_wmb();
@@ -279,7 +281,8 @@ static struct kcm_sock *reserve_rx_kcm(struct kcm_psock *psock,
 	kcm = list_first_entry(&mux->kcm_rx_waiters,
 			       struct kcm_sock, wait_rx_list);
 	list_del(&kcm->wait_rx_list);
-	kcm->rx_wait = false;
+	/* paired with lockless reads in kcm_rfree() */
+	WRITE_ONCE(kcm->rx_wait, false);
 
 	psock->rx_kcm = kcm;
 	/* paired with lockless reads in kcm_rfree() */
@@ -1241,7 +1244,8 @@ static void kcm_recv_disable(struct kcm_sock *kcm)
 	if (!kcm->rx_psock) {
 		if (kcm->rx_wait) {
 			list_del(&kcm->wait_rx_list);
-			kcm->rx_wait = false;
+			/* paired with lockless reads in kcm_rfree() */
+			WRITE_ONCE(kcm->rx_wait, false);
 		}
 
 		requeue_rx_msgs(mux, &kcm->sk.sk_receive_queue);
@@ -1794,7 +1798,8 @@ static void kcm_done(struct kcm_sock *kcm)
 
 	if (kcm->rx_wait) {
 		list_del(&kcm->wait_rx_list);
-		kcm->rx_wait = false;
+		/* paired with lockless reads in kcm_rfree() */
+		WRITE_ONCE(kcm->rx_wait, false);
 	}
 	/* Move any pending receive messages to other kcm sockets */
 	requeue_rx_msgs(mux, &sk->sk_receive_queue);
-- 
2.35.1

[PATCH 5.15 083/132] net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed

[Greg Kroah-Hartman]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit d266935ac43d57586e311a087510fe6a084af742 ]

When the ops_init() interface is invoked to initialize the net, but
ops->init() fails, data is released. However, the ptr pointer in
net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked
to release the net, invalid address access occurs.

The process is as follows:
setup_net()
	ops_init()
		data = kzalloc(...)   ---> alloc "data"
		net_assign_generic()  ---> assign "date" to ptr in net->gen
		...
		ops->init()           ---> failed
		...
		kfree(data);          ---> ptr in net->gen is invalid
	...
	ops_exit_list()
		...
		nfqnl_nf_hook_drop()
			*q = nfnl_queue_pernet(net) ---> q is invalid

The following is the Call Trace information:
BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280
Read of size 8 at addr ffff88810396b240 by task ip/15855
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
nfqnl_nf_hook_drop+0x264/0x280
nf_queue_nf_hook_drop+0x8b/0x1b0
__nf_unregister_net_hook+0x1ae/0x5a0
nf_unregister_net_hooks+0xde/0x130
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>

Allocated by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc+0x49/0xb0
ops_init+0xe7/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
ops_init+0xb9/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: f875bae06533 ("net: Automatically allocate per namespace data.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/net_namespace.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 9745cb6fdf51..982d06332007 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -117,6 +117,7 @@ static int net_assign_generic(struct net *net, unsigned int id, void *data)
 
 static int ops_init(const struct pernet_operations *ops, struct net *net)
 {
+	struct net_generic *ng;
 	int err = -ENOMEM;
 	void *data = NULL;
 
@@ -135,7 +136,13 @@ static int ops_init(const struct pernet_operations *ops, struct net *net)
 	if (!err)
 		return 0;
 
+	if (ops->id && ops->size) {
 cleanup:
+		ng = rcu_dereference_protected(net->gen,
+					       lockdep_is_held(&pernet_ops_rwsem));
+		ng->ptr[*ops->id] = NULL;
+	}
+
 	kfree(data);
 
 out:
-- 
2.35.1

[PATCH 5.15 084/132] net: lantiq_etop: dont free skb when returning NETDEV_TX_BUSY

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit 9c1eaa27ec599fcc25ed4970c0b73c247d147a2b ]

The ndo_start_xmit() method must not free skb when returning
NETDEV_TX_BUSY, since caller is going to requeue freed skb.

Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/lantiq_etop.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 62f8c5212182..057d655d1769 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -466,7 +466,6 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
 	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
 
 	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-		dev_kfree_skb_any(skb);
 		netdev_err(dev, "tx ring full\n");
 		netif_tx_stop_queue(txq);
 		return NETDEV_TX_BUSY;
-- 
2.35.1

[PATCH 5.15 085/132] tcp: minor optimization in tcp_add_backlog()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d519f350967a60b85a574ad8aeac43f2b4384746 ]

If packet is going to be coalesced, sk_sndbuf/sk_rcvbuf values
are not used. Defer their access to the point we need them.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ec791d8149ff ("tcp: fix a signed-integer-overflow bug in tcp_add_backlog()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_ipv4.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 88a45d5650da..bae5c4ec5786 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1808,8 +1808,7 @@ int tcp_v4_early_demux(struct sk_buff *skb)
 
 bool tcp_add_backlog(struct sock *sk, struct sk_buff *skb)
 {
-	u32 limit = READ_ONCE(sk->sk_rcvbuf) + READ_ONCE(sk->sk_sndbuf);
-	u32 tail_gso_size, tail_gso_segs;
+	u32 limit, tail_gso_size, tail_gso_segs;
 	struct skb_shared_info *shinfo;
 	const struct tcphdr *th;
 	struct tcphdr *thtail;
@@ -1917,7 +1916,7 @@ bool tcp_add_backlog(struct sock *sk, struct sk_buff *skb)
 	 * to reduce memory overhead, so add a little headroom here.
 	 * Few sockets backlog are possibly concurrently non empty.
 	 */
-	limit += 64*1024;
+	limit = READ_ONCE(sk->sk_rcvbuf) + READ_ONCE(sk->sk_sndbuf) + 64*1024;
 
 	if (unlikely(sk_add_backlog(sk, skb, limit))) {
 		bh_unlock_sock(sk);
-- 
2.35.1

[PATCH 5.15 086/132] tcp: fix a signed-integer-overflow bug in tcp_add_backlog()

[Greg Kroah-Hartman]

From: Lu Wei <luwei32@huawei.com>

[ Upstream commit ec791d8149ff60c40ad2074af3b92a39c916a03f ]

The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and
in tcp_add_backlog(), the variable limit is caculated by adding
sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value
of int and overflow. This patch reduces the limit budget by
halving the sndbuf to solve this issue since ACK packets are much
smaller than the payload.

Fixes: c9c3321257e1 ("tcp: add tcp_add_backlog()")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_ipv4.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index bae5c4ec5786..42d4af632495 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1912,11 +1912,13 @@ bool tcp_add_backlog(struct sock *sk, struct sk_buff *skb)
 	__skb_push(skb, hdrlen);
 
 no_coalesce:
+	limit = (u32)READ_ONCE(sk->sk_rcvbuf) + (u32)(READ_ONCE(sk->sk_sndbuf) >> 1);
+
 	/* Only socket owner can try to collapse/prune rx queues
 	 * to reduce memory overhead, so add a little headroom here.
 	 * Few sockets backlog are possibly concurrently non empty.
 	 */
-	limit = READ_ONCE(sk->sk_rcvbuf) + READ_ONCE(sk->sk_sndbuf) + 64*1024;
+	limit += 64 * 1024;
 
 	if (unlikely(sk_add_backlog(sk, skb, limit))) {
 		bh_unlock_sock(sk);
-- 
2.35.1

[PATCH 5.15 087/132] tcp: fix indefinite deferral of RTO with SACK reneging

[Greg Kroah-Hartman]

From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit 3d2af9cce3133b3bc596a9d065c6f9d93419ccfb ]

This commit fixes a bug that can cause a TCP data sender to repeatedly
defer RTOs when encountering SACK reneging.

The bug is that when we're in fast recovery in a scenario with SACK
reneging, every time we get an ACK we call tcp_check_sack_reneging()
and it can note the apparent SACK reneging and rearm the RTO timer for
srtt/2 into the future. In some SACK reneging scenarios that can
happen repeatedly until the receive window fills up, at which point
the sender can't send any more, the ACKs stop arriving, and the RTO
fires at srtt/2 after the last ACK. But that can take far too long
(O(10 secs)), since the connection is stuck in fast recovery with a
low cwnd that cannot grow beyond ssthresh, even if more bandwidth is
available.

This fix changes the logic in tcp_check_sack_reneging() to only rearm
the RTO timer if data is cumulatively ACKed, indicating forward
progress. This avoids this kind of nearly infinite loop of RTO timer
re-arming. In addition, this meets the goals of
tcp_check_sack_reneging() in handling Windows TCP behavior that looks
temporarily like SACK reneging but is not really.

Many thanks to Jakub Kicinski and Neil Spring, who reported this issue
and provided critical packet traces that enabled root-causing this
issue. Also, many thanks to Jakub Kicinski for testing this fix.

Fixes: 5ae344c949e7 ("tcp: reduce spurious retransmits due to transient SACK reneging")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Neil Spring <ntspring@fb.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221021170821.1093930-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 686e210d89c2..102a0436eb29 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2185,7 +2185,8 @@ void tcp_enter_loss(struct sock *sk)
  */
 static bool tcp_check_sack_reneging(struct sock *sk, int flag)
 {
-	if (flag & FLAG_SACK_RENEGING) {
+	if (flag & FLAG_SACK_RENEGING &&
+	    flag & FLAG_SND_UNA_ADVANCED) {
 		struct tcp_sock *tp = tcp_sk(sk);
 		unsigned long delay = max(usecs_to_jiffies(tp->srtt_us >> 4),
 					  msecs_to_jiffies(10));
-- 
2.35.1

[PATCH 5.15 088/132] net-memcg: avoid stalls when under memory pressure

[Greg Kroah-Hartman]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 720ca52bcef225b967a339e0fffb6d0c7e962240 ]

As Shakeel explains the commit under Fixes had the unintended
side-effect of no longer pre-loading the cached memory allowance.
Even tho we previously dropped the first packet received when
over memory limit - the consecutive ones would get thru by using
the cache. The charging was happening in batches of 128kB, so
we'd let in 128kB (truesize) worth of packets per one drop.

After the change we no longer force charge, there will be no
cache filling side effects. This causes significant drops and
connection stalls for workloads which use a lot of page cache,
since we can't reclaim page cache under GFP_NOWAIT.

Some of the latency can be recovered by improving SACK reneg
handling but nowhere near enough to get back to the pre-5.15
performance (the application I'm experimenting with still
sees 5-10x worst latency).

Apply the suggested workaround of using GFP_ATOMIC. We will now
be more permissive than previously as we'll drop _no_ packets
in softirq when under pressure. But I can't think of any good
and simple way to address that within networking.

Link: https://lore.kernel.org/all/20221012163300.795e7b86@kernel.org/
Suggested-by: Shakeel Butt <shakeelb@google.com>
Fixes: 4b1327be9fe5 ("net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()")
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20221021160304.1362511-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index cb1a1bb64ed8..e1a303e4f0f7 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -2472,7 +2472,7 @@ static inline gfp_t gfp_any(void)
 
 static inline gfp_t gfp_memcg_charge(void)
 {
-	return in_softirq() ? GFP_NOWAIT : GFP_KERNEL;
+	return in_softirq() ? GFP_ATOMIC : GFP_KERNEL;
 }
 
 static inline long sock_rcvtimeo(const struct sock *sk, bool noblock)
-- 
2.35.1

[PATCH 5.15 089/132] drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()

[Greg Kroah-Hartman]

From: Rafael Mendonca <rafaelmendsr@gmail.com>

[ Upstream commit 90bfee142af0f0e9d3bec80e7acd5f49b230acf7 ]

If the number of pages from the userptr BO differs from the SG BO then the
allocated memory for the SG table doesn't get freed before returning
-EINVAL, which may lead to a memory leak in some error paths. Fix this by
checking the number of pages before allocating memory for the SG table.

Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
index c904269b3e14..477ab3551177 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c
@@ -476,13 +476,13 @@ kfd_mem_dmamap_userptr(struct kgd_mem *mem,
 	struct ttm_tt *ttm = bo->tbo.ttm;
 	int ret;
 
+	if (WARN_ON(ttm->num_pages != src_ttm->num_pages))
+		return -EINVAL;
+
 	ttm->sg = kmalloc(sizeof(*ttm->sg), GFP_KERNEL);
 	if (unlikely(!ttm->sg))
 		return -ENOMEM;
 
-	if (WARN_ON(ttm->num_pages != src_ttm->num_pages))
-		return -EINVAL;
-
 	/* Same sequence as in amdgpu_ttm_tt_pin_userptr */
 	ret = sg_alloc_table_from_pages(ttm->sg, src_ttm->pages,
 					ttm->num_pages, 0,
-- 
2.35.1

[PATCH 5.15 090/132] can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error path

[Greg Kroah-Hartman]

From: Dongliang Mu <dzm91@hust.edu.cn>

[ Upstream commit 3e5b3418827cefb5e1cc658806f02965791b8f07 ]

The commit 1149108e2fbf ("can: mscan: improve clock API use") only
adds put_clock() in mpc5xxx_can_remove() function, forgetting to add
put_clock() in the error handling code.

Fix this bug by adding put_clock() in the error handling code.

Fixes: 1149108e2fbf ("can: mscan: improve clock API use")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024133828.35881-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/mscan/mpc5xxx_can.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 35892c1efef0..7d868b6eb579 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -322,14 +322,14 @@ static int mpc5xxx_can_probe(struct platform_device *ofdev)
 					       &mscan_clksrc);
 	if (!priv->can.clock.freq) {
 		dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n");
-		goto exit_free_mscan;
+		goto exit_put_clock;
 	}
 
 	err = register_mscandev(dev, mscan_clksrc);
 	if (err) {
 		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
 			DRV_NAME, err);
-		goto exit_free_mscan;
+		goto exit_put_clock;
 	}
 
 	dev_info(&ofdev->dev, "MSCAN at 0x%p, irq %d, clock %d Hz\n",
@@ -337,7 +337,9 @@ static int mpc5xxx_can_probe(struct platform_device *ofdev)
 
 	return 0;
 
-exit_free_mscan:
+exit_put_clock:
+	if (data->put_clock)
+		data->put_clock(ofdev);
 	free_candev(dev);
 exit_dispose_irq:
 	irq_dispose_mapping(irq);
-- 
2.35.1

[PATCH 5.15 091/132] can: mcp251x: mcp251x_can_probe(): add missing unregister_candev() in error path

[Greg Kroah-Hartman]

From: Dongliang Mu <dzm91@hust.edu.cn>

[ Upstream commit b1a09b63684cea56774786ca14c13b7041ffee63 ]

In mcp251x_can_probe(), if mcp251x_gpio_setup() fails, it forgets to
unregister the CAN device.

Fix this by unregistering can device in mcp251x_can_probe().

Fixes: 2d52dabbef60 ("can: mcp251x: add GPIO support")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024090256.717236-1-dzm91@hust.edu.cn
[mkl: adjust label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/spi/mcp251x.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index baab3adc34bc..f02275f71e4d 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -1419,11 +1419,14 @@ static int mcp251x_can_probe(struct spi_device *spi)
 
 	ret = mcp251x_gpio_setup(priv);
 	if (ret)
-		goto error_probe;
+		goto out_unregister_candev;
 
 	netdev_info(net, "MCP%x successfully initialized.\n", priv->model);
 	return 0;
 
+out_unregister_candev:
+	unregister_candev(net);
+
 error_probe:
 	destroy_workqueue(priv->wq);
 	priv->wq = NULL;
-- 
2.35.1

[PATCH 5.15 092/132] PM: hibernate: Allow hybrid sleep to work with s2idle

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 85850af4fc47132f3f2f0dd698b90f67906600b4 ]

Hybrid sleep is currently hardcoded to only operate with S3 even
on systems that might not support it.

Instead of assuming this mode is what the user wants to use, for
hybrid sleep follow the setting of `mem_sleep_current` which
will respect mem_sleep_default kernel command line and policy
decisions made by the presence of the FADT low power idle bit.

Fixes: 81d45bdf8913 ("PM / hibernate: Untangle power_down()")
Reported-and-tested-by: kolAflash <kolAflash@kolahilft.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/power/hibernate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index d926852f8119..9abc73d500fb 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -640,7 +640,7 @@ static void power_down(void)
 	int error;
 
 	if (hibernation_mode == HIBERNATION_SUSPEND) {
-		error = suspend_devices_and_enter(PM_SUSPEND_MEM);
+		error = suspend_devices_and_enter(mem_sleep_current);
 		if (error) {
 			hibernation_mode = hibernation_ops ?
 						HIBERNATION_PLATFORM :
-- 
2.35.1

[PATCH 5.15 093/132] media: vivid: s_fbuf: add more sanity checks

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit f8bcaf714abfc94818dff8c0db84d750433984f4 ]

VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root
can use it. But at least check if the framebuffer parameters match that
of one of the framebuffer created by vivid, and reject anything else.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/test-drivers/vivid/vivid-core.c | 22 +++++++++++++++++++
 drivers/media/test-drivers/vivid/vivid-core.h |  2 ++
 .../media/test-drivers/vivid/vivid-vid-cap.c  |  9 +++++++-
 3 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/media/test-drivers/vivid/vivid-core.c b/drivers/media/test-drivers/vivid/vivid-core.c
index d2bd2653cf54..e7cc70a92683 100644
--- a/drivers/media/test-drivers/vivid/vivid-core.c
+++ b/drivers/media/test-drivers/vivid/vivid-core.c
@@ -330,6 +330,28 @@ static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *a
 	return vivid_vid_out_g_fbuf(file, fh, a);
 }
 
+/*
+ * Only support the framebuffer of one of the vivid instances.
+ * Anything else is rejected.
+ */
+bool vivid_validate_fb(const struct v4l2_framebuffer *a)
+{
+	struct vivid_dev *dev;
+	int i;
+
+	for (i = 0; i < n_devs; i++) {
+		dev = vivid_devs[i];
+		if (!dev || !dev->video_pbase)
+			continue;
+		if ((unsigned long)a->base == dev->video_pbase &&
+		    a->fmt.width <= dev->display_width &&
+		    a->fmt.height <= dev->display_height &&
+		    a->fmt.bytesperline <= dev->display_byte_stride)
+			return true;
+	}
+	return false;
+}
+
 static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *a)
 {
 	struct video_device *vdev = video_devdata(file);
diff --git a/drivers/media/test-drivers/vivid/vivid-core.h b/drivers/media/test-drivers/vivid/vivid-core.h
index 1e3c4f5a9413..7ceaf9bac2f0 100644
--- a/drivers/media/test-drivers/vivid/vivid-core.h
+++ b/drivers/media/test-drivers/vivid/vivid-core.h
@@ -610,4 +610,6 @@ static inline bool vivid_is_hdmi_out(const struct vivid_dev *dev)
 	return dev->output_type[dev->output] == HDMI;
 }
 
+bool vivid_validate_fb(const struct v4l2_framebuffer *a);
+
 #endif
diff --git a/drivers/media/test-drivers/vivid/vivid-vid-cap.c b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
index b9caa4b26209..c9eb28b3a03d 100644
--- a/drivers/media/test-drivers/vivid/vivid-vid-cap.c
+++ b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
@@ -1272,7 +1272,14 @@ int vivid_vid_cap_s_fbuf(struct file *file, void *fh,
 		return -EINVAL;
 	if (a->fmt.bytesperline < (a->fmt.width * fmt->bit_depth[0]) / 8)
 		return -EINVAL;
-	if (a->fmt.height * a->fmt.bytesperline < a->fmt.sizeimage)
+	if (a->fmt.bytesperline > a->fmt.sizeimage / a->fmt.height)
+		return -EINVAL;
+
+	/*
+	 * Only support the framebuffer of one of the vivid instances.
+	 * Anything else is rejected.
+	 */
+	if (!vivid_validate_fb(a))
 		return -EINVAL;
 
 	dev->fb_vbase_cap = phys_to_virt((unsigned long)a->base);
-- 
2.35.1

[PATCH 5.15 094/132] media: vivid: dev->bitmap_cap wasnt freed in all cases

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 1f65ea411cc7b6ff128d82a3493d7b5648054e6f ]

Whenever the compose width/height values change, the dev->bitmap_cap
vmalloc'ed array must be freed and dev->bitmap_cap set to NULL.

This was done in some places, but not all. This is only an issue if
overlay support is enabled and the bitmap clipping is used.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/test-drivers/vivid/vivid-vid-cap.c   | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/media/test-drivers/vivid/vivid-vid-cap.c b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
index c9eb28b3a03d..99139a8cd4c4 100644
--- a/drivers/media/test-drivers/vivid/vivid-vid-cap.c
+++ b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
@@ -452,6 +452,12 @@ void vivid_update_format_cap(struct vivid_dev *dev, bool keep_controls)
 	tpg_reset_source(&dev->tpg, dev->src_rect.width, dev->src_rect.height, dev->field_cap);
 	dev->crop_cap = dev->src_rect;
 	dev->crop_bounds_cap = dev->src_rect;
+	if (dev->bitmap_cap &&
+	    (dev->compose_cap.width != dev->crop_cap.width ||
+	     dev->compose_cap.height != dev->crop_cap.height)) {
+		vfree(dev->bitmap_cap);
+		dev->bitmap_cap = NULL;
+	}
 	dev->compose_cap = dev->crop_cap;
 	if (V4L2_FIELD_HAS_T_OR_B(dev->field_cap))
 		dev->compose_cap.height /= 2;
@@ -909,6 +915,8 @@ int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection
 	struct vivid_dev *dev = video_drvdata(file);
 	struct v4l2_rect *crop = &dev->crop_cap;
 	struct v4l2_rect *compose = &dev->compose_cap;
+	unsigned orig_compose_w = compose->width;
+	unsigned orig_compose_h = compose->height;
 	unsigned factor = V4L2_FIELD_HAS_T_OR_B(dev->field_cap) ? 2 : 1;
 	int ret;
 
@@ -1025,17 +1033,17 @@ int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection
 			s->r.height /= factor;
 		}
 		v4l2_rect_map_inside(&s->r, &dev->fmt_cap_rect);
-		if (dev->bitmap_cap && (compose->width != s->r.width ||
-					compose->height != s->r.height)) {
-			vfree(dev->bitmap_cap);
-			dev->bitmap_cap = NULL;
-		}
 		*compose = s->r;
 		break;
 	default:
 		return -EINVAL;
 	}
 
+	if (dev->bitmap_cap && (compose->width != orig_compose_w ||
+				compose->height != orig_compose_h)) {
+		vfree(dev->bitmap_cap);
+		dev->bitmap_cap = NULL;
+	}
 	tpg_s_crop_compose(&dev->tpg, crop, compose);
 	return 0;
 }
-- 
2.35.1

[PATCH 5.15 095/132] media: v4l2-dv-timings: add sanity checks for blanking values

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 4b6d66a45ed34a15721cb9e11492fa1a24bc83df ]

Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided
blanking values are reasonable.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-dv-timings.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c
index af48705c704f..003c32fed3f7 100644
--- a/drivers/media/v4l2-core/v4l2-dv-timings.c
+++ b/drivers/media/v4l2-core/v4l2-dv-timings.c
@@ -161,6 +161,20 @@ bool v4l2_valid_dv_timings(const struct v4l2_dv_timings *t,
 	    (bt->interlaced && !(caps & V4L2_DV_BT_CAP_INTERLACED)) ||
 	    (!bt->interlaced && !(caps & V4L2_DV_BT_CAP_PROGRESSIVE)))
 		return false;
+
+	/* sanity checks for the blanking timings */
+	if (!bt->interlaced &&
+	    (bt->il_vbackporch || bt->il_vsync || bt->il_vfrontporch))
+		return false;
+	if (bt->hfrontporch > 2 * bt->width ||
+	    bt->hsync > 1024 || bt->hbackporch > 1024)
+		return false;
+	if (bt->vfrontporch > 4096 ||
+	    bt->vsync > 128 || bt->vbackporch > 4096)
+		return false;
+	if (bt->interlaced && (bt->il_vfrontporch > 4096 ||
+	    bt->il_vsync > 128 || bt->il_vbackporch > 4096))
+		return false;
 	return fnc == NULL || fnc(t, fnc_handle);
 }
 EXPORT_SYMBOL_GPL(v4l2_valid_dv_timings);
-- 
2.35.1

[PATCH 5.15 096/132] media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check interlaced

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 8da7f0976b9071b528c545008de9d10cc81883b1 ]

If it is a progressive (non-interlaced) format, then ignore the
interlaced timing values.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/videodev2.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 9260791b8438..61c5011dfc13 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -1560,7 +1560,8 @@ struct v4l2_bt_timings {
 	((bt)->width + V4L2_DV_BT_BLANKING_WIDTH(bt))
 #define V4L2_DV_BT_BLANKING_HEIGHT(bt) \
 	((bt)->vfrontporch + (bt)->vsync + (bt)->vbackporch + \
-	 (bt)->il_vfrontporch + (bt)->il_vsync + (bt)->il_vbackporch)
+	 ((bt)->interlaced ? \
+	  ((bt)->il_vfrontporch + (bt)->il_vsync + (bt)->il_vbackporch) : 0))
 #define V4L2_DV_BT_FRAME_HEIGHT(bt) \
 	((bt)->height + V4L2_DV_BT_BLANKING_HEIGHT(bt))
 
-- 
2.35.1

[PATCH 5.15 097/132] media: vivid: set num_in/outputs to 0 if not supported

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 69d78a80da4ef12faf2a6f9cfa2097ab4ac43983 ]

If node_types does not have video/vbi/meta inputs or outputs,
then set num_inputs/num_outputs to 0 instead of 1.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0c90f649d2f5 (media: vivid: add vivid_create_queue() helper)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/test-drivers/vivid/vivid-core.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/media/test-drivers/vivid/vivid-core.c b/drivers/media/test-drivers/vivid/vivid-core.c
index e7cc70a92683..065bdc33f049 100644
--- a/drivers/media/test-drivers/vivid/vivid-core.c
+++ b/drivers/media/test-drivers/vivid/vivid-core.c
@@ -932,8 +932,12 @@ static int vivid_detect_feature_set(struct vivid_dev *dev, int inst,
 
 	/* how many inputs do we have and of what type? */
 	dev->num_inputs = num_inputs[inst];
-	if (dev->num_inputs < 1)
-		dev->num_inputs = 1;
+	if (node_type & 0x20007) {
+		if (dev->num_inputs < 1)
+			dev->num_inputs = 1;
+	} else {
+		dev->num_inputs = 0;
+	}
 	if (dev->num_inputs >= MAX_INPUTS)
 		dev->num_inputs = MAX_INPUTS;
 	for (i = 0; i < dev->num_inputs; i++) {
@@ -950,8 +954,12 @@ static int vivid_detect_feature_set(struct vivid_dev *dev, int inst,
 
 	/* how many outputs do we have and of what type? */
 	dev->num_outputs = num_outputs[inst];
-	if (dev->num_outputs < 1)
-		dev->num_outputs = 1;
+	if (node_type & 0x40300) {
+		if (dev->num_outputs < 1)
+			dev->num_outputs = 1;
+	} else {
+		dev->num_outputs = 0;
+	}
 	if (dev->num_outputs >= MAX_OUTPUTS)
 		dev->num_outputs = MAX_OUTPUTS;
 	for (i = 0; i < dev->num_outputs; i++) {
-- 
2.35.1

[PATCH 5.15 098/132] perf vendor events power10: Fix hv-24x7 metric events

[Greg Kroah-Hartman]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit b92dd11725a7c57f55e148c7d3ce58a86f480575 ]

Testcase stat_all_metrics.sh fails in powerpc:

  90: perf all metrics test : FAILED!

The testcase "stat_all_metrics.sh" verifies perf stat result for all the
metric events present in perf list.  It runs perf metric events with
various commands and expects non-empty metric result.

Incase of powerpc:hv-24x7 events, some of the event count can be 0 based
on system configuration. And if that event used as denominator in divide
equation, it can cause divide by 0 error. The current nest_metric.json
file creating divide by 0 issue for some of the metric events, which
results in failure of the "stat_all_metrics.sh" test case.

Most of the metrics events have cycles or an event which expect to have
a larger value as denominator, so adding 1 to the denominator of the
metric expression as a fix.

Result in powerpc box after this patch changes:

  90: perf all metrics test : Ok

Fixes: a3cbcadfdfc330c2 ("perf vendor events power10: Adds 24x7 nest metric events for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221014140220.122251-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../arch/powerpc/power10/nest_metrics.json    | 72 +++++++++----------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json b/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json
index 8ba3e81c9808..fe050d44374b 100644
--- a/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json
+++ b/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json
@@ -1,13 +1,13 @@
 [
     {
       "MetricName": "VEC_GROUP_PUMP_RETRY_RATIO_P01",
-      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP01\\,chip\\=?@ / hv_24x7@PM_PB_VG_PUMP01\\,chip\\=?@) * 100",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP01\\,chip\\=?@ / (1 + hv_24x7@PM_PB_VG_PUMP01\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "VEC_GROUP_PUMP_RETRY_RATIO_P23",
-      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP23\\,chip\\=?@ / hv_24x7@PM_PB_VG_PUMP23\\,chip\\=?@) * 100",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP23\\,chip\\=?@ / (1 + hv_24x7@PM_PB_VG_PUMP23\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
@@ -61,13 +61,13 @@
     },
     {
       "MetricName": "REMOTE_NODE_PUMPS_RETRIES_RATIO_P01",
-      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP01\\,chip\\=?@ / hv_24x7@PM_PB_RNS_PUMP01\\,chip\\=?@) * 100",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP01\\,chip\\=?@ / (1 + hv_24x7@PM_PB_RNS_PUMP01\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "REMOTE_NODE_PUMPS_RETRIES_RATIO_P23",
-      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP23\\,chip\\=?@ / hv_24x7@PM_PB_RNS_PUMP23\\,chip\\=?@) * 100",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP23\\,chip\\=?@ / (1 + hv_24x7@PM_PB_RNS_PUMP23\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
@@ -151,193 +151,193 @@
     },
     {
       "MetricName": "XLINK0_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK1_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK2_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK3_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK4_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK5_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK6_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK7_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK0_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK1_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK2_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK3_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK4_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK5_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK6_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK7_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK0_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK1_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK2_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK3_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK4_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK5_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK6_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK7_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK0_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK1_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK2_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK3_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK4_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK5_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK6_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK7_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
-- 
2.35.1

[PATCH 5.15 098/132] perf vendor events power10: Fix hv-24x7 metric events

[Greg Kroah-Hartman]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit b92dd11725a7c57f55e148c7d3ce58a86f480575 ]

Testcase stat_all_metrics.sh fails in powerpc:

  90: perf all metrics test : FAILED!

The testcase "stat_all_metrics.sh" verifies perf stat result for all the
metric events present in perf list.  It runs perf metric events with
various commands and expects non-empty metric result.

Incase of powerpc:hv-24x7 events, some of the event count can be 0 based
on system configuration. And if that event used as denominator in divide
equation, it can cause divide by 0 error. The current nest_metric.json
file creating divide by 0 issue for some of the metric events, which
results in failure of the "stat_all_metrics.sh" test case.

Most of the metrics events have cycles or an event which expect to have
a larger value as denominator, so adding 1 to the denominator of the
metric expression as a fix.

Result in powerpc box after this patch changes:

  90: perf all metrics test : Ok

Fixes: a3cbcadfdfc330c2 ("perf vendor events power10: Adds 24x7 nest metric events for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221014140220.122251-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../arch/powerpc/power10/nest_metrics.json    | 72 +++++++++----------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json b/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json
index 8ba3e81c9808..fe050d44374b 100644
--- a/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json
+++ b/tools/perf/pmu-events/arch/powerpc/power10/nest_metrics.json
@@ -1,13 +1,13 @@
 [
     {
       "MetricName": "VEC_GROUP_PUMP_RETRY_RATIO_P01",
-      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP01\\,chip\\=?@ / hv_24x7@PM_PB_VG_PUMP01\\,chip\\=?@) * 100",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP01\\,chip\\=?@ / (1 + hv_24x7@PM_PB_VG_PUMP01\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "VEC_GROUP_PUMP_RETRY_RATIO_P23",
-      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP23\\,chip\\=?@ / hv_24x7@PM_PB_VG_PUMP23\\,chip\\=?@) * 100",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_VG_PUMP23\\,chip\\=?@ / (1 + hv_24x7@PM_PB_VG_PUMP23\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
@@ -61,13 +61,13 @@
     },
     {
       "MetricName": "REMOTE_NODE_PUMPS_RETRIES_RATIO_P01",
-      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP01\\,chip\\=?@ / hv_24x7@PM_PB_RNS_PUMP01\\,chip\\=?@) * 100",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP01\\,chip\\=?@ / (1 + hv_24x7@PM_PB_RNS_PUMP01\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "REMOTE_NODE_PUMPS_RETRIES_RATIO_P23",
-      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP23\\,chip\\=?@ / hv_24x7@PM_PB_RNS_PUMP23\\,chip\\=?@) * 100",
+      "MetricExpr": "(hv_24x7@PM_PB_RTY_RNS_PUMP23\\,chip\\=?@ / (1 + hv_24x7@PM_PB_RNS_PUMP23\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
@@ -151,193 +151,193 @@
     },
     {
       "MetricName": "XLINK0_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK1_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK2_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK3_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK4_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK5_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK6_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK7_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK0_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK1_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK2_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK3_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK4_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK5_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK6_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "XLINK7_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_XLINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_XLINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_XLINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK0_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK1_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK2_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK3_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK4_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK5_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK6_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK7_OUT_TOTAL_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_TOTAL_UTIL\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_TOTAL_UTIL\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK0_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK0_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK0_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK0_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK1_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK1_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK1_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK1_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK2_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK2_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK2_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK2_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK3_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK3_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK3_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK3_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK4_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK4_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK4_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK4_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK5_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK5_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK5_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK5_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK6_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK6_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK6_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK6_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
     {
       "MetricName": "ALINK7_OUT_DATA_UTILIZATION",
-      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_DATA\\,chip\\=?@) / (hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
+      "MetricExpr": "((hv_24x7@PM_ALINK7_OUT_ODD_DATA\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_DATA\\,chip\\=?@) / (1 + hv_24x7@PM_ALINK7_OUT_ODD_AVLBL_CYCLES\\,chip\\=?@ + hv_24x7@PM_ALINK7_OUT_EVEN_AVLBL_CYCLES\\,chip\\=?@)) * 100",
       "ScaleUnit": "1.063%",
       "AggregationMode": "PerChip"
     },
-- 
2.35.1

[PATCH 5.15 099/132] ipv6: ensure sane device mtu in tunnels

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d89d7ff01235f218dad37de84457717f699dee79 ]

Another syzbot report [1] with no reproducer hints
at a bug in ip6_gre tunnel (dev:ip6gretap0)

Since ipv6 mcast code makes sure to read dev->mtu once
and applies a sanity check on it (see commit b9b312a7a451
"ipv6: mcast: better catch silly mtu values"), a remaining
possibility is that a layer is able to set dev->mtu to
an underflowed value (high order bit set).

This could happen indeed in ip6gre_tnl_link_config_route(),
ip6_tnl_link_config() and ipip6_tunnel_bind_dev()

Make sure to sanitize mtu value in a local variable before
it is written once on dev->mtu, as lockless readers could
catch wrong temporary value.

[1]
skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:120
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022
Workqueue: mld mld_ifc_work
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116
lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116
sp : ffff800020dd3b60
x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800
x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200
x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38
x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9
x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80
x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80
x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00
x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000
x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089
Call trace:
skb_panic+0x4c/0x50 net/core/skbuff.c:116
skb_over_panic net/core/skbuff.c:125 [inline]
skb_put+0xd4/0xdc net/core/skbuff.c:2049
ip6_mc_hdr net/ipv6/mcast.c:1714 [inline]
mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765
add_grhead net/ipv6/mcast.c:1851 [inline]
add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989
mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115
mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000)

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_gre.c    | 12 +++++++-----
 net/ipv6/ip6_tunnel.c | 11 ++++++-----
 net/ipv6/sit.c        |  8 +++++---
 3 files changed, 18 insertions(+), 13 deletions(-)

diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 70ef4d4ebff4..13b1748b8b46 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -1153,14 +1153,16 @@ static void ip6gre_tnl_link_config_route(struct ip6_tnl *t, int set_mtu,
 				dev->needed_headroom = dst_len;
 
 			if (set_mtu) {
-				dev->mtu = rt->dst.dev->mtu - t_hlen;
+				int mtu = rt->dst.dev->mtu - t_hlen;
+
 				if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
-					dev->mtu -= 8;
+					mtu -= 8;
 				if (dev->type == ARPHRD_ETHER)
-					dev->mtu -= ETH_HLEN;
+					mtu -= ETH_HLEN;
 
-				if (dev->mtu < IPV6_MIN_MTU)
-					dev->mtu = IPV6_MIN_MTU;
+				if (mtu < IPV6_MIN_MTU)
+					mtu = IPV6_MIN_MTU;
+				WRITE_ONCE(dev->mtu, mtu);
 			}
 		}
 		ip6_rt_put(rt);
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index fa8da8ff35b4..ea5077942871 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1446,8 +1446,8 @@ static void ip6_tnl_link_config(struct ip6_tnl *t)
 	struct net_device *tdev = NULL;
 	struct __ip6_tnl_parm *p = &t->parms;
 	struct flowi6 *fl6 = &t->fl.u.ip6;
-	unsigned int mtu;
 	int t_hlen;
+	int mtu;
 
 	memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
 	memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr));
@@ -1494,12 +1494,13 @@ static void ip6_tnl_link_config(struct ip6_tnl *t)
 			dev->hard_header_len = tdev->hard_header_len + t_hlen;
 			mtu = min_t(unsigned int, tdev->mtu, IP6_MAX_MTU);
 
-			dev->mtu = mtu - t_hlen;
+			mtu = mtu - t_hlen;
 			if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
-				dev->mtu -= 8;
+				mtu -= 8;
 
-			if (dev->mtu < IPV6_MIN_MTU)
-				dev->mtu = IPV6_MIN_MTU;
+			if (mtu < IPV6_MIN_MTU)
+				mtu = IPV6_MIN_MTU;
+			WRITE_ONCE(dev->mtu, mtu);
 		}
 	}
 }
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 637cd99bd7a6..946871741f12 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1130,10 +1130,12 @@ static void ipip6_tunnel_bind_dev(struct net_device *dev)
 
 	if (tdev && !netif_is_l3_master(tdev)) {
 		int t_hlen = tunnel->hlen + sizeof(struct iphdr);
+		int mtu;
 
-		dev->mtu = tdev->mtu - t_hlen;
-		if (dev->mtu < IPV6_MIN_MTU)
-			dev->mtu = IPV6_MIN_MTU;
+		mtu = tdev->mtu - t_hlen;
+		if (mtu < IPV6_MIN_MTU)
+			mtu = IPV6_MIN_MTU;
+		WRITE_ONCE(dev->mtu, mtu);
 	}
 }
 
-- 
2.35.1

[PATCH 5.15 100/132] i40e: Fix ethtool rx-flow-hash setting for X722

[Greg Kroah-Hartman]

From: Slawomir Laba <slawomirx.laba@intel.com>

[ Upstream commit 54b5af5a438076082d482cab105b1bd484ab5074 ]

When enabling flow type for RSS hash via ethtool:

ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d

the driver would fail to setup this setting on X722
device since it was using the mask on the register
dedicated for X710 devices.

Apply a different mask on the register when setting the
RSS hash for the X722 device.

When displaying the flow types enabled via ethtool:

ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6

the driver would print wrong values for X722 device.

Fix this issue by testing masks for X722 device in
i40e_get_rss_hash_opts function.

Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/i40e/i40e_ethtool.c    | 31 ++++++++++++++-----
 drivers/net/ethernet/intel/i40e/i40e_type.h   |  4 +++
 2 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 11a17ebfceef..6d94255bea5f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -3085,10 +3085,17 @@ static int i40e_get_rss_hash_opts(struct i40e_pf *pf, struct ethtool_rxnfc *cmd)
 
 		if (cmd->flow_type == TCP_V4_FLOW ||
 		    cmd->flow_type == UDP_V4_FLOW) {
-			if (i_set & I40E_L3_SRC_MASK)
-				cmd->data |= RXH_IP_SRC;
-			if (i_set & I40E_L3_DST_MASK)
-				cmd->data |= RXH_IP_DST;
+			if (hw->mac.type == I40E_MAC_X722) {
+				if (i_set & I40E_X722_L3_SRC_MASK)
+					cmd->data |= RXH_IP_SRC;
+				if (i_set & I40E_X722_L3_DST_MASK)
+					cmd->data |= RXH_IP_DST;
+			} else {
+				if (i_set & I40E_L3_SRC_MASK)
+					cmd->data |= RXH_IP_SRC;
+				if (i_set & I40E_L3_DST_MASK)
+					cmd->data |= RXH_IP_DST;
+			}
 		} else if (cmd->flow_type == TCP_V6_FLOW ||
 			  cmd->flow_type == UDP_V6_FLOW) {
 			if (i_set & I40E_L3_V6_SRC_MASK)
@@ -3446,12 +3453,15 @@ static int i40e_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd,
 
 /**
  * i40e_get_rss_hash_bits - Read RSS Hash bits from register
+ * @hw: hw structure
  * @nfc: pointer to user request
  * @i_setc: bits currently set
  *
  * Returns value of bits to be set per user request
  **/
-static u64 i40e_get_rss_hash_bits(struct ethtool_rxnfc *nfc, u64 i_setc)
+static u64 i40e_get_rss_hash_bits(struct i40e_hw *hw,
+				  struct ethtool_rxnfc *nfc,
+				  u64 i_setc)
 {
 	u64 i_set = i_setc;
 	u64 src_l3 = 0, dst_l3 = 0;
@@ -3470,8 +3480,13 @@ static u64 i40e_get_rss_hash_bits(struct ethtool_rxnfc *nfc, u64 i_setc)
 		dst_l3 = I40E_L3_V6_DST_MASK;
 	} else if (nfc->flow_type == TCP_V4_FLOW ||
 		  nfc->flow_type == UDP_V4_FLOW) {
-		src_l3 = I40E_L3_SRC_MASK;
-		dst_l3 = I40E_L3_DST_MASK;
+		if (hw->mac.type == I40E_MAC_X722) {
+			src_l3 = I40E_X722_L3_SRC_MASK;
+			dst_l3 = I40E_X722_L3_DST_MASK;
+		} else {
+			src_l3 = I40E_L3_SRC_MASK;
+			dst_l3 = I40E_L3_DST_MASK;
+		}
 	} else {
 		/* Any other flow type are not supported here */
 		return i_set;
@@ -3586,7 +3601,7 @@ static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
 					       flow_pctype)) |
 			((u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(1,
 					       flow_pctype)) << 32);
-		i_set = i40e_get_rss_hash_bits(nfc, i_setc);
+		i_set = i40e_get_rss_hash_bits(&pf->hw, nfc, i_setc);
 		i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, flow_pctype),
 				  (u32)i_set);
 		i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, flow_pctype),
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 7b3f30beb757..388c3d36d96a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -1404,6 +1404,10 @@ struct i40e_lldp_variables {
 #define I40E_PFQF_CTL_0_HASHLUTSIZE_512	0x00010000
 
 /* INPUT SET MASK for RSS, flow director, and flexible payload */
+#define I40E_X722_L3_SRC_SHIFT		49
+#define I40E_X722_L3_SRC_MASK		(0x3ULL << I40E_X722_L3_SRC_SHIFT)
+#define I40E_X722_L3_DST_SHIFT		41
+#define I40E_X722_L3_DST_MASK		(0x3ULL << I40E_X722_L3_DST_SHIFT)
 #define I40E_L3_SRC_SHIFT		47
 #define I40E_L3_SRC_MASK		(0x3ULL << I40E_L3_SRC_SHIFT)
 #define I40E_L3_V6_SRC_SHIFT		43
-- 
2.35.1

[PATCH 5.15 101/132] i40e: Fix VF hang when reset is triggered on another VF

[Greg Kroah-Hartman]

From: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>

[ Upstream commit 52424f974bc53c26ba3f00300a00e9de9afcd972 ]

When a reset was triggered on one VF with i40e_reset_vf
global PF state __I40E_VF_DISABLE was set on a PF until
the reset finished. If immediately after triggering reset
on one VF there is a request to reset on another
it will cause a hang on VF side because VF will be notified
of incoming reset but the reset will never happen because
of this global state, we will get such error message:

[  +4.890195] iavf 0000:86:02.1: Never saw reset

and VF will hang waiting for the reset to be triggered.

Fix this by introducing new VF state I40E_VF_STATE_RESETTING
that will be set on a VF if it is currently resetting instead of
the global __I40E_VF_DISABLE PF state.

Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    | 43 ++++++++++++++-----
 .../ethernet/intel/i40e/i40e_virtchnl_pf.h    |  1 +
 2 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index c078fbaf19fd..8f350792e823 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1536,10 +1536,12 @@ bool i40e_reset_vf(struct i40e_vf *vf, bool flr)
 	if (test_bit(__I40E_VF_RESETS_DISABLED, pf->state))
 		return true;
 
-	/* If the VFs have been disabled, this means something else is
-	 * resetting the VF, so we shouldn't continue.
-	 */
-	if (test_and_set_bit(__I40E_VF_DISABLE, pf->state))
+	/* Bail out if VFs are disabled. */
+	if (test_bit(__I40E_VF_DISABLE, pf->state))
+		return true;
+
+	/* If VF is being reset already we don't need to continue. */
+	if (test_and_set_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
 		return true;
 
 	i40e_trigger_vf_reset(vf, flr);
@@ -1576,7 +1578,7 @@ bool i40e_reset_vf(struct i40e_vf *vf, bool flr)
 	i40e_cleanup_reset_vf(vf);
 
 	i40e_flush(hw);
-	clear_bit(__I40E_VF_DISABLE, pf->state);
+	clear_bit(I40E_VF_STATE_RESETTING, &vf->vf_states);
 
 	return true;
 }
@@ -1609,8 +1611,12 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
 		return false;
 
 	/* Begin reset on all VFs at once */
-	for (v = 0; v < pf->num_alloc_vfs; v++)
-		i40e_trigger_vf_reset(&pf->vf[v], flr);
+	for (v = 0; v < pf->num_alloc_vfs; v++) {
+		vf = &pf->vf[v];
+		/* If VF is being reset no need to trigger reset again */
+		if (!test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
+			i40e_trigger_vf_reset(&pf->vf[v], flr);
+	}
 
 	/* HW requires some time to make sure it can flush the FIFO for a VF
 	 * when it resets it. Poll the VPGEN_VFRSTAT register for each VF in
@@ -1626,9 +1632,11 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
 		 */
 		while (v < pf->num_alloc_vfs) {
 			vf = &pf->vf[v];
-			reg = rd32(hw, I40E_VPGEN_VFRSTAT(vf->vf_id));
-			if (!(reg & I40E_VPGEN_VFRSTAT_VFRD_MASK))
-				break;
+			if (!test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states)) {
+				reg = rd32(hw, I40E_VPGEN_VFRSTAT(vf->vf_id));
+				if (!(reg & I40E_VPGEN_VFRSTAT_VFRD_MASK))
+					break;
+			}
 
 			/* If the current VF has finished resetting, move on
 			 * to the next VF in sequence.
@@ -1656,6 +1664,10 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
 		if (pf->vf[v].lan_vsi_idx == 0)
 			continue;
 
+		/* If VF is reset in another thread just continue */
+		if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
+			continue;
+
 		i40e_vsi_stop_rings_no_wait(pf->vsi[pf->vf[v].lan_vsi_idx]);
 	}
 
@@ -1667,6 +1679,10 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
 		if (pf->vf[v].lan_vsi_idx == 0)
 			continue;
 
+		/* If VF is reset in another thread just continue */
+		if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
+			continue;
+
 		i40e_vsi_wait_queues_disabled(pf->vsi[pf->vf[v].lan_vsi_idx]);
 	}
 
@@ -1676,8 +1692,13 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
 	mdelay(50);
 
 	/* Finish the reset on each VF */
-	for (v = 0; v < pf->num_alloc_vfs; v++)
+	for (v = 0; v < pf->num_alloc_vfs; v++) {
+		/* If VF is reset in another thread just continue */
+		if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
+			continue;
+
 		i40e_cleanup_reset_vf(&pf->vf[v]);
+	}
 
 	i40e_flush(hw);
 	clear_bit(__I40E_VF_DISABLE, pf->state);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index a554d0a0b09b..358bbdb58795 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -39,6 +39,7 @@ enum i40e_vf_states {
 	I40E_VF_STATE_MC_PROMISC,
 	I40E_VF_STATE_UC_PROMISC,
 	I40E_VF_STATE_PRE_ENABLE,
+	I40E_VF_STATE_RESETTING
 };
 
 /* VF capabilities */
-- 
2.35.1

[PATCH 5.15 102/132] i40e: Fix flow-type by setting GL_HASH_INSET registers

[Greg Kroah-Hartman]

From: Slawomir Laba <slawomirx.laba@intel.com>

[ Upstream commit 3b32c9932853e11d71f9db012d69e92e4669ba23 ]

Fix setting bits for specific flow_type for GLQF_HASH_INSET register.
In previous version all of the bits were set only in hena register, while
in inset only one bit was set. In order for this working correctly on all
types of cards these bits needs to be set correctly for both hena and inset
registers.

Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/i40e/i40e_ethtool.c    | 71 ++++++++++---------
 1 file changed, 38 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 6d94255bea5f..4e3243287805 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -3504,6 +3504,7 @@ static u64 i40e_get_rss_hash_bits(struct i40e_hw *hw,
 	return i_set;
 }
 
+#define FLOW_PCTYPES_SIZE 64
 /**
  * i40e_set_rss_hash_opt - Enable/Disable flow types for RSS hash
  * @pf: pointer to the physical function struct
@@ -3516,9 +3517,11 @@ static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
 	struct i40e_hw *hw = &pf->hw;
 	u64 hena = (u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(0)) |
 		   ((u64)i40e_read_rx_ctl(hw, I40E_PFQF_HENA(1)) << 32);
-	u8 flow_pctype = 0;
+	DECLARE_BITMAP(flow_pctypes, FLOW_PCTYPES_SIZE);
 	u64 i_set, i_setc;
 
+	bitmap_zero(flow_pctypes, FLOW_PCTYPES_SIZE);
+
 	if (pf->flags & I40E_FLAG_MFP_ENABLED) {
 		dev_err(&pf->pdev->dev,
 			"Change of RSS hash input set is not supported when MFP mode is enabled\n");
@@ -3534,36 +3537,35 @@ static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
 
 	switch (nfc->flow_type) {
 	case TCP_V4_FLOW:
-		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
+		set_bit(I40E_FILTER_PCTYPE_NONF_IPV4_TCP, flow_pctypes);
 		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
-			hena |=
-			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK);
+			set_bit(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK,
+				flow_pctypes);
 		break;
 	case TCP_V6_FLOW:
-		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV6_TCP;
-		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
-			hena |=
-			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK);
+		set_bit(I40E_FILTER_PCTYPE_NONF_IPV6_TCP, flow_pctypes);
 		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
-			hena |=
-			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK);
+			set_bit(I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK,
+				flow_pctypes);
 		break;
 	case UDP_V4_FLOW:
-		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV4_UDP;
-		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
-			hena |=
-			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) |
-			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP);
-
+		set_bit(I40E_FILTER_PCTYPE_NONF_IPV4_UDP, flow_pctypes);
+		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE) {
+			set_bit(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP,
+				flow_pctypes);
+			set_bit(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP,
+				flow_pctypes);
+		}
 		hena |= BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4);
 		break;
 	case UDP_V6_FLOW:
-		flow_pctype = I40E_FILTER_PCTYPE_NONF_IPV6_UDP;
-		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE)
-			hena |=
-			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) |
-			  BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP);
-
+		set_bit(I40E_FILTER_PCTYPE_NONF_IPV6_UDP, flow_pctypes);
+		if (pf->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE) {
+			set_bit(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP,
+				flow_pctypes);
+			set_bit(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP,
+				flow_pctypes);
+		}
 		hena |= BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6);
 		break;
 	case AH_ESP_V4_FLOW:
@@ -3596,17 +3598,20 @@ static int i40e_set_rss_hash_opt(struct i40e_pf *pf, struct ethtool_rxnfc *nfc)
 		return -EINVAL;
 	}
 
-	if (flow_pctype) {
-		i_setc = (u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(0,
-					       flow_pctype)) |
-			((u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(1,
-					       flow_pctype)) << 32);
-		i_set = i40e_get_rss_hash_bits(&pf->hw, nfc, i_setc);
-		i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, flow_pctype),
-				  (u32)i_set);
-		i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, flow_pctype),
-				  (u32)(i_set >> 32));
-		hena |= BIT_ULL(flow_pctype);
+	if (bitmap_weight(flow_pctypes, FLOW_PCTYPES_SIZE)) {
+		u8 flow_id;
+
+		for_each_set_bit(flow_id, flow_pctypes, FLOW_PCTYPES_SIZE) {
+			i_setc = (u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, flow_id)) |
+				 ((u64)i40e_read_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, flow_id)) << 32);
+			i_set = i40e_get_rss_hash_bits(&pf->hw, nfc, i_setc);
+
+			i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(0, flow_id),
+					  (u32)i_set);
+			i40e_write_rx_ctl(hw, I40E_GLQF_HASH_INSET(1, flow_id),
+					  (u32)(i_set >> 32));
+			hena |= BIT_ULL(flow_id);
+		}
 	}
 
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), (u32)hena);
-- 
2.35.1

[PATCH 5.15 103/132] net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 5da6d65590a0698199df44d095e54b0ed1708178 ]

pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release()
while unbinding device.

Fixes: 8ca86fd83eae ("net: Micrel KSZ8841/2 PCI Ethernet driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221024131338.2848959-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/ksz884x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index a0ee155f9f51..f56bcd3e36d2 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -6848,7 +6848,7 @@ static int pcidev_init(struct pci_dev *pdev, const struct pci_device_id *id)
 	char banner[sizeof(version)];
 	struct ksz_switch *sw = NULL;
 
-	result = pci_enable_device(pdev);
+	result = pcim_enable_device(pdev);
 	if (result)
 		return result;
 
-- 
2.35.1

[PATCH 5.15 104/132] PM: domains: Fix handling of unavailable/disabled idle states

[Greg Kroah-Hartman]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit e0c57a5c70c13317238cb19a7ded0eab4a5f7de5 ]

Platforms can provide the information about the availability of each
idle states via status flag. Platforms may have to disable one or more
idle states for various reasons like broken firmware or other unmet
dependencies.

Fix handling of such unavailable/disabled idle states by ignoring them
while parsing the states.

Fixes: a3381e3a65cb ("PM / domains: Fix up domain-idle-states OF parsing")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/power/domain.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 7f3d21e6fdfb..94fe30c187ad 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -2889,6 +2889,10 @@ static int genpd_iterate_idle_states(struct device_node *dn,
 		np = it.node;
 		if (!of_match_node(idle_state_match, np))
 			continue;
+
+		if (!of_device_is_available(np))
+			continue;
+
 		if (states) {
 			ret = genpd_parse_state(&states[i], np);
 			if (ret) {
-- 
2.35.1

[PATCH 5.15 105/132] perf vendor events arm64: Fix incorrect Hisi hip08 L3 metrics

[Greg Kroah-Hartman]

From: Shang XiaoJing <shangxiaojing@huawei.com>

[ Upstream commit e9229d5b6254a75291536f582652c599957344d2 ]

Commit 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3
metrics") add L3 metrics of hip08, but some metrics (IF_BP_MISP_BR_RET,
IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) have incorrect event number due to
the mistakes in document, which caused incorrect result. Fix the
incorrect metrics.

Before:

  65,811,214,308	armv8_pmuv3_0/event=0x1014/	# 18.87 push_branch
  							# -40.19 other_branch
  3,564,316,780	BR_MIS_PRED				# 0.51 indirect_branch
  							# 21.81 pop_branch

After:

  6,537,146,245	BR_MIS_PRED			# 0.48 indirect_branch
  						# 0.47 pop_branch
  						# 0.00 push_branch
  						# 0.05 other_branch

Fixes: 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3 metrics")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221021105035.10000-2-shangxiaojing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json
index dda8e59149d2..be23d3c89a79 100644
--- a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json
+++ b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json
@@ -112,21 +112,21 @@
         "MetricName": "indirect_branch"
     },
     {
-        "MetricExpr": "(armv8_pmuv3_0@event\\=0x1014@ + armv8_pmuv3_0@event\\=0x1018@) / BR_MIS_PRED",
+        "MetricExpr": "(armv8_pmuv3_0@event\\=0x1013@ + armv8_pmuv3_0@event\\=0x1016@) / BR_MIS_PRED",
         "PublicDescription": "Push branch L3 topdown metric",
         "BriefDescription": "Push branch L3 topdown metric",
         "MetricGroup": "TopDownL3",
         "MetricName": "push_branch"
     },
     {
-        "MetricExpr": "armv8_pmuv3_0@event\\=0x100c@ / BR_MIS_PRED",
+        "MetricExpr": "armv8_pmuv3_0@event\\=0x100d@ / BR_MIS_PRED",
         "PublicDescription": "Pop branch L3 topdown metric",
         "BriefDescription": "Pop branch L3 topdown metric",
         "MetricGroup": "TopDownL3",
         "MetricName": "pop_branch"
     },
     {
-        "MetricExpr": "(BR_MIS_PRED - armv8_pmuv3_0@event\\=0x1010@ - armv8_pmuv3_0@event\\=0x1014@ - armv8_pmuv3_0@event\\=0x1018@ - armv8_pmuv3_0@event\\=0x100c@) / BR_MIS_PRED",
+        "MetricExpr": "(BR_MIS_PRED - armv8_pmuv3_0@event\\=0x1010@ - armv8_pmuv3_0@event\\=0x1013@ - armv8_pmuv3_0@event\\=0x1016@ - armv8_pmuv3_0@event\\=0x100d@) / BR_MIS_PRED",
         "PublicDescription": "Other branch L3 topdown metric",
         "BriefDescription": "Other branch L3 topdown metric",
         "MetricGroup": "TopDownL3",
-- 
2.35.1

[PATCH 5.15 105/132] perf vendor events arm64: Fix incorrect Hisi hip08 L3 metrics

[Greg Kroah-Hartman]

From: Shang XiaoJing <shangxiaojing@huawei.com>

[ Upstream commit e9229d5b6254a75291536f582652c599957344d2 ]

Commit 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3
metrics") add L3 metrics of hip08, but some metrics (IF_BP_MISP_BR_RET,
IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) have incorrect event number due to
the mistakes in document, which caused incorrect result. Fix the
incorrect metrics.

Before:

  65,811,214,308	armv8_pmuv3_0/event=0x1014/	# 18.87 push_branch
  							# -40.19 other_branch
  3,564,316,780	BR_MIS_PRED				# 0.51 indirect_branch
  							# 21.81 pop_branch

After:

  6,537,146,245	BR_MIS_PRED			# 0.48 indirect_branch
  						# 0.47 pop_branch
  						# 0.00 push_branch
  						# 0.05 other_branch

Fixes: 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3 metrics")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221021105035.10000-2-shangxiaojing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json
index dda8e59149d2..be23d3c89a79 100644
--- a/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json
+++ b/tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json
@@ -112,21 +112,21 @@
         "MetricName": "indirect_branch"
     },
     {
-        "MetricExpr": "(armv8_pmuv3_0@event\\=0x1014@ + armv8_pmuv3_0@event\\=0x1018@) / BR_MIS_PRED",
+        "MetricExpr": "(armv8_pmuv3_0@event\\=0x1013@ + armv8_pmuv3_0@event\\=0x1016@) / BR_MIS_PRED",
         "PublicDescription": "Push branch L3 topdown metric",
         "BriefDescription": "Push branch L3 topdown metric",
         "MetricGroup": "TopDownL3",
         "MetricName": "push_branch"
     },
     {
-        "MetricExpr": "armv8_pmuv3_0@event\\=0x100c@ / BR_MIS_PRED",
+        "MetricExpr": "armv8_pmuv3_0@event\\=0x100d@ / BR_MIS_PRED",
         "PublicDescription": "Pop branch L3 topdown metric",
         "BriefDescription": "Pop branch L3 topdown metric",
         "MetricGroup": "TopDownL3",
         "MetricName": "pop_branch"
     },
     {
-        "MetricExpr": "(BR_MIS_PRED - armv8_pmuv3_0@event\\=0x1010@ - armv8_pmuv3_0@event\\=0x1014@ - armv8_pmuv3_0@event\\=0x1018@ - armv8_pmuv3_0@event\\=0x100c@) / BR_MIS_PRED",
+        "MetricExpr": "(BR_MIS_PRED - armv8_pmuv3_0@event\\=0x1010@ - armv8_pmuv3_0@event\\=0x1013@ - armv8_pmuv3_0@event\\=0x1016@ - armv8_pmuv3_0@event\\=0x100d@) / BR_MIS_PRED",
         "PublicDescription": "Other branch L3 topdown metric",
         "BriefDescription": "Other branch L3 topdown metric",
         "MetricGroup": "TopDownL3",
-- 
2.35.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.15 106/132] net: fec: limit register access on i.MX6UL

[Greg Kroah-Hartman]

From: Juergen Borleis <jbe@pengutronix.de>

[ Upstream commit 0a8b43b12dd78daa77a7dc007b92770d262a2714 ]

Using 'ethtool -d […]' on an i.MX6UL leads to a kernel crash:

   Unhandled fault: external abort on non-linefetch (0x1008) at […]

due to this SoC has less registers in its FEC implementation compared to other
i.MX6 variants. Thus, a run-time decision is required to avoid access to
non-existing registers.

Fixes: a51d3ab50702 ("net: fec: use a more proper compatible string for i.MX6UL type device")
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221024080552.21004-1-jbe@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 46 ++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 67eb9b671244..313ae8112067 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2336,6 +2336,31 @@ static u32 fec_enet_register_offset[] = {
 	IEEE_R_DROP, IEEE_R_FRAME_OK, IEEE_R_CRC, IEEE_R_ALIGN, IEEE_R_MACERR,
 	IEEE_R_FDXFC, IEEE_R_OCTETS_OK
 };
+/* for i.MX6ul */
+static u32 fec_enet_register_offset_6ul[] = {
+	FEC_IEVENT, FEC_IMASK, FEC_R_DES_ACTIVE_0, FEC_X_DES_ACTIVE_0,
+	FEC_ECNTRL, FEC_MII_DATA, FEC_MII_SPEED, FEC_MIB_CTRLSTAT, FEC_R_CNTRL,
+	FEC_X_CNTRL, FEC_ADDR_LOW, FEC_ADDR_HIGH, FEC_OPD, FEC_TXIC0, FEC_RXIC0,
+	FEC_HASH_TABLE_HIGH, FEC_HASH_TABLE_LOW, FEC_GRP_HASH_TABLE_HIGH,
+	FEC_GRP_HASH_TABLE_LOW, FEC_X_WMRK, FEC_R_DES_START_0,
+	FEC_X_DES_START_0, FEC_R_BUFF_SIZE_0, FEC_R_FIFO_RSFL, FEC_R_FIFO_RSEM,
+	FEC_R_FIFO_RAEM, FEC_R_FIFO_RAFL, FEC_RACC,
+	RMON_T_DROP, RMON_T_PACKETS, RMON_T_BC_PKT, RMON_T_MC_PKT,
+	RMON_T_CRC_ALIGN, RMON_T_UNDERSIZE, RMON_T_OVERSIZE, RMON_T_FRAG,
+	RMON_T_JAB, RMON_T_COL, RMON_T_P64, RMON_T_P65TO127, RMON_T_P128TO255,
+	RMON_T_P256TO511, RMON_T_P512TO1023, RMON_T_P1024TO2047,
+	RMON_T_P_GTE2048, RMON_T_OCTETS,
+	IEEE_T_DROP, IEEE_T_FRAME_OK, IEEE_T_1COL, IEEE_T_MCOL, IEEE_T_DEF,
+	IEEE_T_LCOL, IEEE_T_EXCOL, IEEE_T_MACERR, IEEE_T_CSERR, IEEE_T_SQE,
+	IEEE_T_FDXFC, IEEE_T_OCTETS_OK,
+	RMON_R_PACKETS, RMON_R_BC_PKT, RMON_R_MC_PKT, RMON_R_CRC_ALIGN,
+	RMON_R_UNDERSIZE, RMON_R_OVERSIZE, RMON_R_FRAG, RMON_R_JAB,
+	RMON_R_RESVD_O, RMON_R_P64, RMON_R_P65TO127, RMON_R_P128TO255,
+	RMON_R_P256TO511, RMON_R_P512TO1023, RMON_R_P1024TO2047,
+	RMON_R_P_GTE2048, RMON_R_OCTETS,
+	IEEE_R_DROP, IEEE_R_FRAME_OK, IEEE_R_CRC, IEEE_R_ALIGN, IEEE_R_MACERR,
+	IEEE_R_FDXFC, IEEE_R_OCTETS_OK
+};
 #else
 static __u32 fec_enet_register_version = 1;
 static u32 fec_enet_register_offset[] = {
@@ -2360,7 +2385,24 @@ static void fec_enet_get_regs(struct net_device *ndev,
 	u32 *buf = (u32 *)regbuf;
 	u32 i, off;
 	int ret;
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+	defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
+	defined(CONFIG_ARM64) || defined(CONFIG_COMPILE_TEST)
+	u32 *reg_list;
+	u32 reg_cnt;
 
+	if (!of_machine_is_compatible("fsl,imx6ul")) {
+		reg_list = fec_enet_register_offset;
+		reg_cnt = ARRAY_SIZE(fec_enet_register_offset);
+	} else {
+		reg_list = fec_enet_register_offset_6ul;
+		reg_cnt = ARRAY_SIZE(fec_enet_register_offset_6ul);
+	}
+#else
+	/* coldfire */
+	static u32 *reg_list = fec_enet_register_offset;
+	static const u32 reg_cnt = ARRAY_SIZE(fec_enet_register_offset);
+#endif
 	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
 		return;
@@ -2369,8 +2411,8 @@ static void fec_enet_get_regs(struct net_device *ndev,
 
 	memset(buf, 0, regs->len);
 
-	for (i = 0; i < ARRAY_SIZE(fec_enet_register_offset); i++) {
-		off = fec_enet_register_offset[i];
+	for (i = 0; i < reg_cnt; i++) {
+		off = reg_list[i];
 
 		if ((off == FEC_R_BOUND || off == FEC_R_FSTART) &&
 		    !(fep->quirks & FEC_QUIRK_HAS_FRREG))
-- 
2.35.1

[PATCH 5.15 107/132] net: ethernet: ave: Fix MAC to be in charge of PHY PM

[Greg Kroah-Hartman]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit e2badb4bd33abe13ddc35975bd7f7f8693955a4b ]

The phylib callback is called after MAC driver's own resume callback is
called. For AVE driver, after resuming immediately, PHY state machine is
in PHY_NOLINK because there is a time lag from link-down to link-up due to
autoneg. The result is WARN_ON() dump in mdio_bus_phy_resume().

Since ave_resume() itself calls phy_resume(), AVE driver should manage
PHY PM. To indicate that MAC driver manages PHY PM, set
phydev->mac_managed_pm to true to avoid the unnecessary phylib call and
add missing phy_init_hw() to ave_resume().

Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221024072227.24769-1-hayashi.kunihiko@socionext.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/socionext/sni_ave.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c
index ae31ed93aaf0..57dc9680ad50 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -1229,6 +1229,8 @@ static int ave_init(struct net_device *ndev)
 
 	phy_support_asym_pause(phydev);
 
+	phydev->mac_managed_pm = true;
+
 	phy_attached_info(phydev);
 
 	return 0;
@@ -1758,6 +1760,10 @@ static int ave_resume(struct device *dev)
 
 	ave_global_reset(ndev);
 
+	ret = phy_init_hw(ndev->phydev);
+	if (ret)
+		return ret;
+
 	ave_ethtool_get_wol(ndev, &wol);
 	wol.wolopts = priv->wolopts;
 	__ave_ethtool_set_wol(ndev, &wol);
-- 
2.35.1

[PATCH 5.15 108/132] ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 4a4c8482e370d697738a78dcd7bf2780832cb712 ]

dev_set_name() in soundbus_add_one() allocates memory for name, it need be
freed when of_device_register() fails, call soundbus_dev_put() to give up
the reference that hold in device_initialize(), so that it can be freed in
kobject_cleanup() when the refcount hit to 0. And other resources are also
freed in i2sbus_release_dev(), so it can return 0 directly.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221027013438.991920-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/aoa/soundbus/i2sbus/core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c
index faf6b03131ee..f6841daf9e3b 100644
--- a/sound/aoa/soundbus/i2sbus/core.c
+++ b/sound/aoa/soundbus/i2sbus/core.c
@@ -302,6 +302,10 @@ static int i2sbus_add_dev(struct macio_dev *macio,
 
 	if (soundbus_add_one(&dev->sound)) {
 		printk(KERN_DEBUG "i2sbus: device registration error!\n");
+		if (dev->sound.ofdev.dev.kobj.state_initialized) {
+			soundbus_dev_put(&dev->sound);
+			return 0;
+		}
 		goto err;
 	}
 
-- 
2.35.1

[PATCH 5.15 109/132] ALSA: aoa: Fix I2S device accounting

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit f1fae475f10a26b7e34da4ff2e2f19b7feb3548e ]

i2sbus_add_dev() is supposed to return the number of probed devices,
i.e. either 1 or 0.  However, i2sbus_add_dev() has one error handling
that returns -ENODEV; this will screw up the accumulation number
counted in the caller, i2sbus_probe().

Fix the return value to 0 and add the comment for better understanding
for readers.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Link: https://lore.kernel.org/r/20221027065233.13292-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/aoa/soundbus/i2sbus/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c
index f6841daf9e3b..51ed2f34b276 100644
--- a/sound/aoa/soundbus/i2sbus/core.c
+++ b/sound/aoa/soundbus/i2sbus/core.c
@@ -147,6 +147,7 @@ static int i2sbus_get_and_fixup_rsrc(struct device_node *np, int index,
 	return rc;
 }
 
+/* Returns 1 if added, 0 for otherwise; don't return a negative value! */
 /* FIXME: look at device node refcounting */
 static int i2sbus_add_dev(struct macio_dev *macio,
 			  struct i2sbus_control *control,
@@ -213,7 +214,7 @@ static int i2sbus_add_dev(struct macio_dev *macio,
 	 * either as the second one in that case is just a modem. */
 	if (!ok) {
 		kfree(dev);
-		return -ENODEV;
+		return 0;
 	}
 
 	mutex_init(&dev->lock);
-- 
2.35.1

[PATCH 5.15 110/132] openvswitch: switch from WARN to pr_warn

[Greg Kroah-Hartman]

From: Aaron Conole <aconole@redhat.com>

[ Upstream commit fd954cc1919e35cb92f78671cab6e42d661945a3 ]

As noted by Paolo Abeni, pr_warn doesn't generate any splat and can still
preserve the warning to the user that feature downgrade occurred.  We
likely cannot introduce other kinds of checks / enforcement here because
syzbot can generate different genl versions to the datapath.

Reported-by: syzbot+31cde0bef4bbf8ba2d86@syzkaller.appspotmail.com
Fixes: 44da5ae5fbea ("openvswitch: Drop user features if old user space attempted to create datapath")
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/openvswitch/datapath.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index 46ef1525b2e5..94c48122fdc3 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -1605,7 +1605,8 @@ static void ovs_dp_reset_user_features(struct sk_buff *skb,
 	if (IS_ERR(dp))
 		return;
 
-	WARN(dp->user_features, "Dropping previously announced user features\n");
+	pr_warn("%s: Dropping previously announced user features\n",
+		ovs_dp_name(dp));
 	dp->user_features = 0;
 }
 
-- 
2.35.1

[PATCH 5.15 111/132] net: ehea: fix possible memory leak in ehea_register_port()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 0e7ce23a917a9cc83ca3c779fbba836bca3bcf1e ]

If of_device_register() returns error, the of node and the
name allocated in dev_set_name() is leaked, call put_device()
to give up the reference that was set in device_initialize(),
so that of node is put in logical_port_release() and the name
is freed in kobject_cleanup().

Fixes: 1acf2318dd13 ("ehea: dynamic add / remove port")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221025130011.1071357-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index d5df131b183c..6c534b92aeed 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -2898,6 +2898,7 @@ static struct device *ehea_register_port(struct ehea_port *port,
 	ret = of_device_register(&port->ofdev);
 	if (ret) {
 		pr_err("failed to register device. ret=%d\n", ret);
+		put_device(&port->ofdev.dev);
 		goto out;
 	}
 
-- 
2.35.1

[PATCH 5.15 112/132] net: bcmsysport: Indicate MAC is in charge of PHY PM

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 9f172134dde7e4f5bf4b9139f23a1e741ec1c36e ]

Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The SYSTEMPORT
driver essentially does exactly what mdio_bus_phy_resume() does by
calling phy_resume().

Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221025234201.2549360-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index ae541a9d1eee..4c7f828c69c6 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1991,6 +1991,9 @@ static int bcm_sysport_open(struct net_device *dev)
 		goto out_clk_disable;
 	}
 
+	/* Indicate that the MAC is responsible for PHY PM */
+	phydev->mac_managed_pm = true;
+
 	/* Reset house keeping link status */
 	priv->old_duplex = -1;
 	priv->old_link = -1;
-- 
2.35.1

[PATCH 5.15 113/132] nh: fix scope used to find saddr when adding non gw nh

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit bac0f937c343d651874f83b265ca8f5070ed4f06 ]

As explained by Julian, fib_nh_scope is related to fib_nh_gw4, but
fib_info_update_nhc_saddr() needs the scope of the route, which is
the scope "before" fib_nh_scope, ie fib_nh_scope - 1.

This patch fixes the problem described in commit 747c14307214 ("ip: fix
dflt addr selection for connected nexthop").

Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops")
Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/nexthop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c
index cc8f120149f6..6cc7d347ec0a 100644
--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -2535,7 +2535,7 @@ static int nh_create_ipv4(struct net *net, struct nexthop *nh,
 	if (!err) {
 		nh->nh_flags = fib_nh->fib_nh_flags;
 		fib_info_update_nhc_saddr(net, &fib_nh->nh_common,
-					  fib_nh->fib_nh_scope);
+					  !fib_nh->fib_nh_scope ? 0 : fib_nh->fib_nh_scope - 1);
 	} else {
 		fib_nh_release(net, fib_nh);
 	}
-- 
2.35.1

[PATCH 5.15 114/132] net: broadcom: bcm4908enet: remove redundant variable bytes

[Greg Kroah-Hartman]

From: Colin Ian King <colin.i.king@gmail.com>

[ Upstream commit 62a3106697f3c6f9af64a2cd0f9ff58552010dc8 ]

The variable bytes is being used to summate slot lengths,
however the value is never used afterwards. The summation
is redundant so remove variable bytes.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211222003937.727325-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: ef3556ee16c6 ("net: broadcom: bcm4908_enet: update TX stats after actual transmission")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcm4908_enet.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcm4908_enet.c b/drivers/net/ethernet/broadcom/bcm4908_enet.c
index 376f81796a29..994731a33e18 100644
--- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
@@ -635,7 +635,6 @@ static int bcm4908_enet_poll_tx(struct napi_struct *napi, int weight)
 	struct bcm4908_enet_dma_ring_bd *buf_desc;
 	struct bcm4908_enet_dma_ring_slot *slot;
 	struct device *dev = enet->dev;
-	unsigned int bytes = 0;
 	int handled = 0;
 
 	while (handled < weight && tx_ring->read_idx != tx_ring->write_idx) {
@@ -646,7 +645,6 @@ static int bcm4908_enet_poll_tx(struct napi_struct *napi, int weight)
 
 		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
 		dev_kfree_skb(slot->skb);
-		bytes += slot->len;
 		if (++tx_ring->read_idx == tx_ring->length)
 			tx_ring->read_idx = 0;
 
-- 
2.35.1

[PATCH 5.15 115/132] net: broadcom: bcm4908_enet: update TX stats after actual transmission

[Greg Kroah-Hartman]

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit ef3556ee16c68735ec69bd08df41d1cd83b14ad3 ]

Queueing packets doesn't guarantee their transmission. Update TX stats
after hardware confirms consuming submitted data.

This also fixes a possible race and NULL dereference.
bcm4908_enet_start_xmit() could try to access skb after freeing it in
the bcm4908_enet_poll_tx().

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221027112430.8696-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcm4908_enet.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcm4908_enet.c b/drivers/net/ethernet/broadcom/bcm4908_enet.c
index 994731a33e18..7e89664943ce 100644
--- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
@@ -561,8 +561,6 @@ static int bcm4908_enet_start_xmit(struct sk_buff *skb, struct net_device *netde
 
 	if (++ring->write_idx == ring->length - 1)
 		ring->write_idx = 0;
-	enet->netdev->stats.tx_bytes += skb->len;
-	enet->netdev->stats.tx_packets++;
 
 	return NETDEV_TX_OK;
 }
@@ -635,6 +633,7 @@ static int bcm4908_enet_poll_tx(struct napi_struct *napi, int weight)
 	struct bcm4908_enet_dma_ring_bd *buf_desc;
 	struct bcm4908_enet_dma_ring_slot *slot;
 	struct device *dev = enet->dev;
+	unsigned int bytes = 0;
 	int handled = 0;
 
 	while (handled < weight && tx_ring->read_idx != tx_ring->write_idx) {
@@ -645,12 +644,17 @@ static int bcm4908_enet_poll_tx(struct napi_struct *napi, int weight)
 
 		dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_TO_DEVICE);
 		dev_kfree_skb(slot->skb);
-		if (++tx_ring->read_idx == tx_ring->length)
-			tx_ring->read_idx = 0;
 
 		handled++;
+		bytes += slot->len;
+
+		if (++tx_ring->read_idx == tx_ring->length)
+			tx_ring->read_idx = 0;
 	}
 
+	enet->netdev->stats.tx_packets += handled;
+	enet->netdev->stats.tx_bytes += bytes;
+
 	if (handled < weight) {
 		napi_complete_done(napi, handled);
 		bcm4908_enet_dma_ring_intrs_on(enet, tx_ring);
-- 
2.35.1

[PATCH 5.15 116/132] netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed

[Greg Kroah-Hartman]

From: Zhengchao Shao <shaozhengchao@huawei.com>

[ Upstream commit a6aa8d0ce2cfba57ac0f23293fcb3be0b9f53fba ]

Remove dir in nsim_dev_debugfs_init() when creating ports dir failed.
Otherwise, the netdevsim device will not be created next time. Kernel
reports an error: debugfs: Directory 'netdevsim1' with parent 'netdevsim'
already present!

Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/netdevsim/dev.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/netdevsim/dev.c b/drivers/net/netdevsim/dev.c
index 54313bd57797..94490dfae656 100644
--- a/drivers/net/netdevsim/dev.c
+++ b/drivers/net/netdevsim/dev.c
@@ -229,8 +229,10 @@ static int nsim_dev_debugfs_init(struct nsim_dev *nsim_dev)
 	if (IS_ERR(nsim_dev->ddir))
 		return PTR_ERR(nsim_dev->ddir);
 	nsim_dev->ports_ddir = debugfs_create_dir("ports", nsim_dev->ddir);
-	if (IS_ERR(nsim_dev->ports_ddir))
-		return PTR_ERR(nsim_dev->ports_ddir);
+	if (IS_ERR(nsim_dev->ports_ddir)) {
+		err = PTR_ERR(nsim_dev->ports_ddir);
+		goto err_ddir;
+	}
 	debugfs_create_bool("fw_update_status", 0600, nsim_dev->ddir,
 			    &nsim_dev->fw_update_status);
 	debugfs_create_u32("fw_update_overwrite_mask", 0600, nsim_dev->ddir,
@@ -267,7 +269,7 @@ static int nsim_dev_debugfs_init(struct nsim_dev *nsim_dev)
 	nsim_dev->nodes_ddir = debugfs_create_dir("rate_nodes", nsim_dev->ddir);
 	if (IS_ERR(nsim_dev->nodes_ddir)) {
 		err = PTR_ERR(nsim_dev->nodes_ddir);
-		goto err_out;
+		goto err_ports_ddir;
 	}
 	debugfs_create_bool("fail_trap_drop_counter_get", 0600,
 			    nsim_dev->ddir,
@@ -275,8 +277,9 @@ static int nsim_dev_debugfs_init(struct nsim_dev *nsim_dev)
 	nsim_udp_tunnels_debugfs_create(nsim_dev);
 	return 0;
 
-err_out:
+err_ports_ddir:
 	debugfs_remove_recursive(nsim_dev->ports_ddir);
+err_ddir:
 	debugfs_remove_recursive(nsim_dev->ddir);
 	return err;
 }
-- 
2.35.1

[PATCH 5.15 117/132] net/mlx5e: Do not increment ESN when updating IPsec ESN state

[Greg Kroah-Hartman]

From: Hyong Youb Kim <hyonkim@cisco.com>

[ Upstream commit 888be6b279b7257b5f6e4c9527675bff0a335596 ]

An offloaded SA stops receiving after about 2^32 + replay_window
packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all
subsequent packets get dropped with SA-icv-failure (integrity_failed).

To reproduce the bug:
- ConnectX-6 Dx with crypto enabled (FW 22.30.1004)
- ipsec.conf:
  nic-offload = yes
  replay-window = 32
  esn = yes
  salifetime=24h
- Run netperf for a long time to send more than 2^32 packets
  netperf -H <device-under-test> -t TCP_STREAM -l 20000

When 2^32 + replay_window packets are received, the replay window
moves from the 2nd half of subspace (overlap=1) to the 1st half
(overlap=0). The driver then updates the 'esn' value in NIC
(i.e. seq_hi) as follows.

 seq_hi = xfrm_replay_seqhi(seq_bottom)
 new esn in NIC = seq_hi + 1

The +1 increment is wrong, as seq_hi already contains the correct
seq_hi. For example, when seq_hi=1, the driver actually tells NIC to
use seq_hi=2 (esn). This incorrect esn value causes all subsequent
packets to fail integrity checks (SA-icv-failure). So, do not
increment.

Fixes: cb01008390bb ("net/mlx5: IPSec, Add support for ESN")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
index 7cab08a2f715..05882d1a4407 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
@@ -113,7 +113,6 @@ static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry)
 	struct xfrm_replay_state_esn *replay_esn;
 	u32 seq_bottom = 0;
 	u8 overlap;
-	u32 *esn;
 
 	if (!(sa_entry->x->props.flags & XFRM_STATE_ESN)) {
 		sa_entry->esn_state.trigger = 0;
@@ -128,11 +127,9 @@ static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry)
 
 	sa_entry->esn_state.esn = xfrm_replay_seqhi(sa_entry->x,
 						    htonl(seq_bottom));
-	esn = &sa_entry->esn_state.esn;
 
 	sa_entry->esn_state.trigger = 1;
 	if (unlikely(overlap && seq_bottom < MLX5E_IPSEC_ESN_SCOPE_MID)) {
-		++(*esn);
 		sa_entry->esn_state.overlap = 0;
 		return true;
 	} else if (unlikely(!overlap &&
-- 
2.35.1

[PATCH 5.15 118/132] net/mlx5e: Extend SKB room check to include PTP-SQ

[Greg Kroah-Hartman]

From: Aya Levin <ayal@nvidia.com>

[ Upstream commit 19b43a432e3e47db656a8269a74b50aef826950c ]

When tx_port_ts is set, the driver diverts all UPD traffic over PTP port
to a dedicated PTP-SQ. The SKBs are cached until the wire-CQE arrives.
When the packet size is greater then MTU, the firmware might drop it and
the packet won't be transmitted to the wire, hence the wire-CQE won't
reach the driver. In this case the SKBs are accumulated in the SKB fifo.
Add room check to consider the PTP-SQ SKB fifo, when the SKB fifo is
full, driver stops the queue resulting in a TX timeout. Devlink
TX-reporter can recover from it.

Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h  | 9 +++++++++
 drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h | 6 ++++++
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c   | 6 ++++++
 3 files changed, 21 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h
index a71a32e00ebb..dc7c57e6de77 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h
@@ -6,6 +6,7 @@
 
 #include "en.h"
 #include "en_stats.h"
+#include "en/txrx.h"
 #include <linux/ptp_classify.h>
 
 #define MLX5E_PTP_CHANNEL_IX 0
@@ -67,6 +68,14 @@ static inline bool mlx5e_use_ptpsq(struct sk_buff *skb)
 		fk.ports.dst == htons(PTP_EV_PORT));
 }
 
+static inline bool mlx5e_ptpsq_fifo_has_room(struct mlx5e_txqsq *sq)
+{
+	if (!sq->ptpsq)
+		return true;
+
+	return mlx5e_skb_fifo_has_room(&sq->ptpsq->skb_fifo);
+}
+
 int mlx5e_ptp_open(struct mlx5e_priv *priv, struct mlx5e_params *params,
 		   u8 lag_port, struct mlx5e_ptp **cp);
 void mlx5e_ptp_close(struct mlx5e_ptp *c);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
index 055c3bc23733..f5c872043bcb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
@@ -73,6 +73,12 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev);
 bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget);
 void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq);
 
+static inline bool
+mlx5e_skb_fifo_has_room(struct mlx5e_skb_fifo *fifo)
+{
+	return (*fifo->pc - *fifo->cc) < fifo->mask;
+}
+
 static inline bool
 mlx5e_wqc_has_room_for(struct mlx5_wq_cyc *wq, u16 cc, u16 pc, u16 n)
 {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 1544d4c2c636..e18fa5ae0fd8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -479,6 +479,11 @@ mlx5e_txwqe_complete(struct mlx5e_txqsq *sq, struct sk_buff *skb,
 	if (unlikely(sq->ptpsq)) {
 		mlx5e_skb_cb_hwtstamp_init(skb);
 		mlx5e_skb_fifo_push(&sq->ptpsq->skb_fifo, skb);
+		if (!netif_tx_queue_stopped(sq->txq) &&
+		    !mlx5e_skb_fifo_has_room(&sq->ptpsq->skb_fifo)) {
+			netif_tx_stop_queue(sq->txq);
+			sq->stats->stopped++;
+		}
 		skb_get(skb);
 	}
 
@@ -906,6 +911,7 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget)
 
 	if (netif_tx_queue_stopped(sq->txq) &&
 	    mlx5e_wqc_has_room_for(&sq->wq, sq->cc, sq->pc, sq->stop_room) &&
+	    mlx5e_ptpsq_fifo_has_room(sq) &&
 	    !test_bit(MLX5E_SQ_STATE_RECOVERING, &sq->state)) {
 		netif_tx_wake_queue(sq->txq);
 		stats->wake++;
-- 
2.35.1

[PATCH 5.15 119/132] net/mlx5: Fix possible use-after-free in async command interface

[Greg Kroah-Hartman]

From: Tariq Toukan <tariqt@nvidia.com>

[ Upstream commit bacd22df95147ed673bec4692ab2d4d585935241 ]

mlx5_cmd_cleanup_async_ctx should return only after all its callback
handlers were completed. Before this patch, the below race between
mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and
lead to a use-after-free:

1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e.
   elevated by 1, a single inflight callback).
2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1.
3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and
   is about to call wake_up().
4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns
   immediately as the condition (num_inflight == 0) holds.
5. mlx5_cmd_cleanup_async_ctx returns.
6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx
   object.
7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed
   object.

Fix it by syncing using a completion object. Mark it completed when
num_inflight reaches 0.

Trace:

BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270
Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0

CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 dump_stack_lvl+0x57/0x7d
 print_report.cold+0x2d5/0x684
 ? do_raw_spin_lock+0x23d/0x270
 kasan_report+0xb1/0x1a0
 ? do_raw_spin_lock+0x23d/0x270
 do_raw_spin_lock+0x23d/0x270
 ? rwlock_bug.part.0+0x90/0x90
 ? __delete_object+0xb8/0x100
 ? lock_downgrade+0x6e0/0x6e0
 _raw_spin_lock_irqsave+0x43/0x60
 ? __wake_up_common_lock+0xb9/0x140
 __wake_up_common_lock+0xb9/0x140
 ? __wake_up_common+0x650/0x650
 ? destroy_tis_callback+0x53/0x70 [mlx5_core]
 ? kasan_set_track+0x21/0x30
 ? destroy_tis_callback+0x53/0x70 [mlx5_core]
 ? kfree+0x1ba/0x520
 ? do_raw_spin_unlock+0x54/0x220
 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core]
 ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core]
 ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core]
 mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core]
 ? dump_command+0xcc0/0xcc0 [mlx5_core]
 ? lockdep_hardirqs_on_prepare+0x400/0x400
 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core]
 cmd_comp_notifier+0x7e/0xb0 [mlx5_core]
 atomic_notifier_call_chain+0xd7/0x1d0
 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core]
 atomic_notifier_call_chain+0xd7/0x1d0
 ? irq_release+0x140/0x140 [mlx5_core]
 irq_int_handler+0x19/0x30 [mlx5_core]
 __handle_irq_event_percpu+0x1f2/0x620
 handle_irq_event+0xb2/0x1d0
 handle_edge_irq+0x21e/0xb00
 __common_interrupt+0x79/0x1a0
 common_interrupt+0x78/0xa0
 </IRQ>
 <TASK>
 asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0x42/0x60
Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00
RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242
RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110
RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc
RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3
R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005
R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000
 ? default_idle_call+0xcc/0x450
 default_idle_call+0xec/0x450
 do_idle+0x394/0x450
 ? arch_cpu_idle_exit+0x40/0x40
 ? do_idle+0x17/0x450
 cpu_startup_entry+0x19/0x20
 start_secondary+0x221/0x2b0
 ? set_cpu_sibling_map+0x2070/0x2070
 secondary_startup_64_no_verify+0xcd/0xdb
 </TASK>

Allocated by task 49502:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x81/0xa0
 kvmalloc_node+0x48/0xe0
 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core]
 mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core]
 mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core]
 mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core]
 mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
 mlx5e_suspend+0xdb/0x140 [mlx5_core]
 mlx5e_remove+0x89/0x190 [mlx5_core]
 auxiliary_bus_remove+0x52/0x70
 device_release_driver_internal+0x40f/0x650
 driver_detach+0xc1/0x180
 bus_remove_driver+0x125/0x2f0
 auxiliary_driver_unregister+0x16/0x50
 mlx5e_cleanup+0x26/0x30 [mlx5_core]
 cleanup+0xc/0x4e [mlx5_core]
 __x64_sys_delete_module+0x2b5/0x450
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 49502:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 ____kasan_slab_free+0x11d/0x1b0
 kfree+0x1ba/0x520
 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core]
 mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core]
 mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core]
 mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
 mlx5e_suspend+0xdb/0x140 [mlx5_core]
 mlx5e_remove+0x89/0x190 [mlx5_core]
 auxiliary_bus_remove+0x52/0x70
 device_release_driver_internal+0x40f/0x650
 driver_detach+0xc1/0x180
 bus_remove_driver+0x125/0x2f0
 auxiliary_driver_unregister+0x16/0x50
 mlx5e_cleanup+0x26/0x30 [mlx5_core]
 cleanup+0xc/0x4e [mlx5_core]
 __x64_sys_delete_module+0x2b5/0x450
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 10 +++++-----
 include/linux/mlx5/driver.h                   |  2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index e06a6104e91f..8a3100f32d3b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -1865,7 +1865,7 @@ void mlx5_cmd_init_async_ctx(struct mlx5_core_dev *dev,
 	ctx->dev = dev;
 	/* Starts at 1 to avoid doing wake_up if we are not cleaning up */
 	atomic_set(&ctx->num_inflight, 1);
-	init_waitqueue_head(&ctx->wait);
+	init_completion(&ctx->inflight_done);
 }
 EXPORT_SYMBOL(mlx5_cmd_init_async_ctx);
 
@@ -1879,8 +1879,8 @@ EXPORT_SYMBOL(mlx5_cmd_init_async_ctx);
  */
 void mlx5_cmd_cleanup_async_ctx(struct mlx5_async_ctx *ctx)
 {
-	atomic_dec(&ctx->num_inflight);
-	wait_event(ctx->wait, atomic_read(&ctx->num_inflight) == 0);
+	if (!atomic_dec_and_test(&ctx->num_inflight))
+		wait_for_completion(&ctx->inflight_done);
 }
 EXPORT_SYMBOL(mlx5_cmd_cleanup_async_ctx);
 
@@ -1891,7 +1891,7 @@ static void mlx5_cmd_exec_cb_handler(int status, void *_work)
 
 	work->user_callback(status, work);
 	if (atomic_dec_and_test(&ctx->num_inflight))
-		wake_up(&ctx->wait);
+		complete(&ctx->inflight_done);
 }
 
 int mlx5_cmd_exec_cb(struct mlx5_async_ctx *ctx, void *in, int in_size,
@@ -1907,7 +1907,7 @@ int mlx5_cmd_exec_cb(struct mlx5_async_ctx *ctx, void *in, int in_size,
 	ret = cmd_exec(ctx->dev, in, in_size, out, out_size,
 		       mlx5_cmd_exec_cb_handler, work, false);
 	if (ret && atomic_dec_and_test(&ctx->num_inflight))
-		wake_up(&ctx->wait);
+		complete(&ctx->inflight_done);
 
 	return ret;
 }
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 4c678de4608d..26095c0fd781 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -966,7 +966,7 @@ void mlx5_cmd_allowed_opcode(struct mlx5_core_dev *dev, u16 opcode);
 struct mlx5_async_ctx {
 	struct mlx5_core_dev *dev;
 	atomic_t num_inflight;
-	struct wait_queue_head wait;
+	struct completion inflight_done;
 };
 
 struct mlx5_async_work;
-- 
2.35.1

[PATCH 5.15 120/132] net/mlx5: Print more info on pci error handlers

[Greg Kroah-Hartman]

From: Saeed Mahameed <saeedm@nvidia.com>

[ Upstream commit fad1783a6d669ac82b6ea4f2f32b4ba2b5484920 ]

In case mlx5_pci_err_detected was called with state equals to
pci_channel_io_perm_failure, the driver will never come back up.

It is nice to know why the driver went to zombie land, so print some
useful information on pci err handlers.

Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Stable-dep-of: 416ef7136319 ("net/mlx5: Update fw fatal reporter state on PCI handlers successful recover")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/main.c    | 51 ++++++++++++++-----
 1 file changed, 37 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 740065e21181..1f0156efe255 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1576,12 +1576,28 @@ static void remove_one(struct pci_dev *pdev)
 	mlx5_devlink_free(devlink);
 }
 
+#define mlx5_pci_trace(dev, fmt, ...) ({ \
+	struct mlx5_core_dev *__dev = (dev); \
+	mlx5_core_info(__dev, "%s Device state = %d health sensors: %d pci_status: %d. " fmt, \
+		       __func__, __dev->state, mlx5_health_check_fatal_sensors(__dev), \
+		       __dev->pci_status, ##__VA_ARGS__); \
+})
+
+static const char *result2str(enum pci_ers_result result)
+{
+	return  result == PCI_ERS_RESULT_NEED_RESET ? "need reset" :
+		result == PCI_ERS_RESULT_DISCONNECT ? "disconnect" :
+		result == PCI_ERS_RESULT_RECOVERED  ? "recovered" :
+		"unknown";
+}
+
 static pci_ers_result_t mlx5_pci_err_detected(struct pci_dev *pdev,
 					      pci_channel_state_t state)
 {
 	struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
+	enum pci_ers_result res;
 
-	mlx5_core_info(dev, "%s was called\n", __func__);
+	mlx5_pci_trace(dev, "Enter, pci channel state = %d\n", state);
 
 	mlx5_enter_error_state(dev, false);
 	mlx5_error_sw_reset(dev);
@@ -1589,8 +1605,11 @@ static pci_ers_result_t mlx5_pci_err_detected(struct pci_dev *pdev,
 	mlx5_drain_health_wq(dev);
 	mlx5_pci_disable_device(dev);
 
-	return state == pci_channel_io_perm_failure ?
+	res = state == pci_channel_io_perm_failure ?
 		PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET;
+
+	mlx5_pci_trace(dev, "Exit, result = %d, %s\n",  res, result2str(res));
+	return res;
 }
 
 /* wait for the device to show vital signs by waiting
@@ -1624,28 +1643,34 @@ static int wait_vital(struct pci_dev *pdev)
 
 static pci_ers_result_t mlx5_pci_slot_reset(struct pci_dev *pdev)
 {
+	enum pci_ers_result res = PCI_ERS_RESULT_DISCONNECT;
 	struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
 	int err;
 
-	mlx5_core_info(dev, "%s was called\n", __func__);
+	mlx5_pci_trace(dev, "Enter\n");
 
 	err = mlx5_pci_enable_device(dev);
 	if (err) {
 		mlx5_core_err(dev, "%s: mlx5_pci_enable_device failed with error code: %d\n",
 			      __func__, err);
-		return PCI_ERS_RESULT_DISCONNECT;
+		goto out;
 	}
 
 	pci_set_master(pdev);
 	pci_restore_state(pdev);
 	pci_save_state(pdev);
 
-	if (wait_vital(pdev)) {
-		mlx5_core_err(dev, "%s: wait_vital timed out\n", __func__);
-		return PCI_ERS_RESULT_DISCONNECT;
+	err = wait_vital(pdev);
+	if (err) {
+		mlx5_core_err(dev, "%s: wait vital failed with error code: %d\n",
+			      __func__, err);
+		goto out;
 	}
 
-	return PCI_ERS_RESULT_RECOVERED;
+	res = PCI_ERS_RESULT_RECOVERED;
+out:
+	mlx5_pci_trace(dev, "Exit, err = %d, result = %d, %s\n", err, res, result2str(res));
+	return res;
 }
 
 static void mlx5_pci_resume(struct pci_dev *pdev)
@@ -1653,14 +1678,12 @@ static void mlx5_pci_resume(struct pci_dev *pdev)
 	struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
 	int err;
 
-	mlx5_core_info(dev, "%s was called\n", __func__);
+	mlx5_pci_trace(dev, "Enter, loading driver..\n");
 
 	err = mlx5_load_one(dev);
-	if (err)
-		mlx5_core_err(dev, "%s: mlx5_load_one failed with error code: %d\n",
-			      __func__, err);
-	else
-		mlx5_core_info(dev, "%s: device recovered\n", __func__);
+
+	mlx5_pci_trace(dev, "Done, err = %d, device %s\n", err,
+		       !err ? "recovered" : "Failed");
 }
 
 static const struct pci_error_handlers mlx5_err_handler = {
-- 
2.35.1

[PATCH 5.15 121/132] net/mlx5: Update fw fatal reporter state on PCI handlers successful recover

[Greg Kroah-Hartman]

From: Roy Novich <royno@nvidia.com>

[ Upstream commit 416ef713631937cf5452476a7f1041a3ae7b06c6 ]

Update devlink health fw fatal reporter state to "healthy" is needed by
strictly calling devlink_health_reporter_state_update() after recovery
was done by PCI error handler. This is needed when fw_fatal reporter was
triggered due to PCI error. Poll health is called and set reporter state
to error. Health recovery failed (since EEH didn't re-enable the PCI).
PCI handlers keep on recover flow and succeed later without devlink
acknowledgment. Fix this by adding devlink state update at the end of
the PCI handler recovery process.

Fixes: 6181e5cb752e ("devlink: add support for reporter recovery completion")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 1f0156efe255..d092261e96c3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1682,6 +1682,10 @@ static void mlx5_pci_resume(struct pci_dev *pdev)
 
 	err = mlx5_load_one(dev);
 
+	if (!err)
+		devlink_health_reporter_state_update(dev->priv.health.fw_fatal_reporter,
+						     DEVLINK_HEALTH_REPORTER_STATE_HEALTHY);
+
 	mlx5_pci_trace(dev, "Done, err = %d, device %s\n", err,
 		       !err ? "recovered" : "Failed");
 }
-- 
2.35.1

[PATCH 5.15 122/132] net/mlx5: Fix crash during sync firmware reset

[Greg Kroah-Hartman]

From: Suresh Devarakonda <ramad@nvidia.com>

[ Upstream commit aefb62a9988749703435e941704624949a80a2a9 ]

When setting Bluefield to DPU NIC mode using mlxconfig tool +  sync
firmware reset flow, we run into scenario where the host was not
eswitch manager at the time of mlx5 driver load but becomes eswitch manager
after the sync firmware reset flow. This results in null pointer
access of mpfs structure during mac filter add. This change prevents null
pointer access but mpfs table entries will not be added.

Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Suresh Devarakonda <ramad@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221026135153.154807-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
index 839a01da110f..8ff16318e32d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
@@ -122,7 +122,7 @@ void mlx5_mpfs_cleanup(struct mlx5_core_dev *dev)
 {
 	struct mlx5_mpfs *mpfs = dev->priv.mpfs;
 
-	if (!MLX5_ESWITCH_MANAGER(dev))
+	if (!mpfs)
 		return;
 
 	WARN_ON(!hlist_empty(mpfs->hash));
@@ -137,7 +137,7 @@ int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac)
 	int err = 0;
 	u32 index;
 
-	if (!MLX5_ESWITCH_MANAGER(dev))
+	if (!mpfs)
 		return 0;
 
 	mutex_lock(&mpfs->lock);
@@ -185,7 +185,7 @@ int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac)
 	int err = 0;
 	u32 index;
 
-	if (!MLX5_ESWITCH_MANAGER(dev))
+	if (!mpfs)
 		return 0;
 
 	mutex_lock(&mpfs->lock);
-- 
2.35.1

[PATCH 5.15 123/132] net: do not sense pfmemalloc status in skb_append_pagefrags()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 228ebc41dfab5b5d34cd76835ddb0ca8ee12f513 ]

skb_append_pagefrags() is used by af_unix and udp sendpage()
implementation so far.

In commit 326140063946 ("tcp: TX zerocopy should not sense
pfmemalloc status") we explained why we should not sense
pfmemalloc status for pages owned by user space.

We should also use skb_fill_page_desc_noacc()
in skb_append_pagefrags() to avoid following KCSAN report:

BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags

write to 0xffffea00058fc1c8 of 8 bytes by task 17319 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:323 [inline]
lru_add_fn+0x327/0x410 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
lru_add_drain_cpu+0x73/0x250 mm/swap.c:669
lru_add_drain+0x21/0x60 mm/swap.c:773
free_pages_and_swap_cache+0x16/0x70 mm/swap_state.c:311
tlb_batch_pages_flush mm/mmu_gather.c:59 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:256 [inline]
tlb_flush_mmu+0x5b2/0x640 mm/mmu_gather.c:263
tlb_finish_mmu+0x86/0x100 mm/mmu_gather.c:363
exit_mmap+0x190/0x4d0 mm/mmap.c:3098
__mmput+0x27/0x1b0 kernel/fork.c:1185
mmput+0x3d/0x50 kernel/fork.c:1207
copy_process+0x19fc/0x2100 kernel/fork.c:2518
kernel_clone+0x166/0x550 kernel/fork.c:2671
__do_sys_clone kernel/fork.c:2812 [inline]
__se_sys_clone kernel/fork.c:2796 [inline]
__x64_sys_clone+0xc3/0xf0 kernel/fork.c:2796
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffffea00058fc1c8 of 8 bytes by task 17325 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1817 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2432 [inline]
skb_fill_page_desc include/linux/skbuff.h:2453 [inline]
skb_append_pagefrags+0x210/0x600 net/core/skbuff.c:3974
unix_stream_sendpage+0x45e/0x990 net/unix/af_unix.c:2338
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x0000000000000000 -> 0xffffea00058fc188

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895c990-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022

Fixes: 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221027040346.1104204-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 3c193e7d4bc6..9cc607b2d3d2 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3821,7 +3821,7 @@ int skb_append_pagefrags(struct sk_buff *skb, struct page *page,
 		skb_frag_size_add(&skb_shinfo(skb)->frags[i - 1], size);
 	} else if (i < MAX_SKB_FRAGS) {
 		get_page(page);
-		skb_fill_page_desc(skb, i, page, offset, size);
+		skb_fill_page_desc_noacc(skb, i, page, offset, size);
 	} else {
 		return -EMSGSIZE;
 	}
-- 
2.35.1

[PATCH 5.15 124/132] kcm: do not sense pfmemalloc status in kcm_sendpage()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit ee15e1f38dc201fa7d63c13aa258b728dce27f4d ]

Similar to changes done in TCP in blamed commit.
We should not sense pfmemalloc status in sendpage() methods.

Fixes: 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221027040637.1107703-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/kcm/kcmsock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index ff6dd2619f22..a1478ad393f9 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -838,7 +838,7 @@ static ssize_t kcm_sendpage(struct socket *sock, struct page *page,
 	}
 
 	get_page(page);
-	skb_fill_page_desc(skb, i, page, offset, size);
+	skb_fill_page_desc_noacc(skb, i, page, offset, size);
 	skb_shinfo(skb)->flags |= SKBFL_SHARED_FRAG;
 
 coalesced:
-- 
2.35.1

[PATCH 5.15 125/132] net: enetc: survive memory pressure without crashing

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 84ce1ca3fe9e1249bf21176ff162200f1c4e5ed1 ]

Under memory pressure, enetc_refill_rx_ring() may fail, and when called
during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not
checked for.

An extreme case of memory pressure will result in exactly zero buffers
being allocated for the RX ring, and in such a case it is expected that
hardware drops all RX packets due to lack of buffers.

This does not happen, because the reset-default value of the consumer
and produces index is 0, and this makes the ENETC think that all buffers
have been initialized and that it owns them (when in reality none were).

The hardware guide explains this best:

| Configure the receive ring producer index register RBaPIR with a value
| of 0. The producer index is initially configured by software but owned
| by hardware after the ring has been enabled. Hardware increments the
| index when a frame is received which may consume one or more BDs.
| Hardware is not allowed to increment the producer index to match the
| consumer index since it is used to indicate an empty condition. The ring
| can hold at most RBLENR[LENGTH]-1 received BDs.
|
| Configure the receive ring consumer index register RBaCIR. The
| consumer index is owned by software and updated during operation of the
| of the BD ring by software, to indicate that any receive data occupied
| in the BD has been processed and it has been prepared for new data.
| - If consumer index and producer index are initialized to the same
|   value, it indicates that all BDs in the ring have been prepared and
|   hardware owns all of the entries.
| - If consumer index is initialized to producer index plus N, it would
|   indicate N BDs have been prepared. Note that hardware cannot start if
|   only a single buffer is prepared due to the restrictions described in
|   (2).
| - Software may write consumer index to match producer index anytime
|   while the ring is operational to indicate all received BDs prior have
|   been processed and new BDs prepared for hardware.

Normally, the value of rx_ring->rcir (consumer index) is brought in sync
with the rx_ring->next_to_use software index, but this only happens if
page allocation ever succeeded.

When PI==CI==0, the hardware appears to receive frames and write them to
DMA address 0x0 (?!), then set the READY bit in the BD.

The enetc_clean_rx_ring() function (and its XDP derivative) is naturally
not prepared to handle such a condition. It will attempt to process
those frames using the rx_swbd structure associated with index i of the
RX ring, but that structure is not fully initialized (enetc_new_page()
does all of that). So what happens next is undefined behavior.

To operate using no buffer, we must initialize the CI to PI + 1, which
will block the hardware from advancing the CI any further, and drop
everything.

The issue was seen while adding support for zero-copy AF_XDP sockets,
where buffer memory comes from user space, which can even decide to
supply no buffers at all (example: "xdpsock --txonly"). However, the bug
is present also with the network stack code, even though it would take a
very determined person to trigger a page allocation failure at the
perfect time (a series of ifup/ifdown under memory pressure should
eventually reproduce it given enough retries).

Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/enetc/enetc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index c0265a6f10c0..77d765809c1e 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -1800,7 +1800,12 @@ static void enetc_setup_rxbdr(struct enetc_hw *hw, struct enetc_bdr *rx_ring)
 	else
 		enetc_rxbdr_wr(hw, idx, ENETC_RBBSR, ENETC_RXB_DMA_SIZE);
 
+	/* Also prepare the consumer index in case page allocation never
+	 * succeeds. In that case, hardware will never advance producer index
+	 * to match consumer index, and will drop all frames.
+	 */
 	enetc_rxbdr_wr(hw, idx, ENETC_RBPIR, 0);
+	enetc_rxbdr_wr(hw, idx, ENETC_RBCIR, 1);
 
 	/* enable Rx ints by setting pkt thr to 1 */
 	enetc_rxbdr_wr(hw, idx, ENETC_RBICR0, ENETC_RBICR0_ICEN | 0x1);
-- 
2.35.1

[PATCH 5.15 126/132] arm64: Add AMPERE1 to the Spectre-BHB affected list

[Greg Kroah-Hartman]

From: D Scott Phillips <scott@os.amperecomputing.com>

[ Upstream commit 0e5d5ae837c8ce04d2ddb874ec5f920118bd9d31 ]

Per AmpereOne erratum AC03_CPU_12, "Branch history may allow control of
speculative execution across software contexts," the AMPERE1 core needs the
bhb clearing loop to mitigate Spectre-BHB, with a loop iteration count of
11.

Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221011022140.432370-1-scott@os.amperecomputing.com
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cputype.h |    4 ++++
 arch/arm64/kernel/proton-pack.c  |    6 ++++++
 2 files changed, 10 insertions(+)

--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -60,6 +60,7 @@
 #define ARM_CPU_IMP_FUJITSU		0x46
 #define ARM_CPU_IMP_HISI		0x48
 #define ARM_CPU_IMP_APPLE		0x61
+#define ARM_CPU_IMP_AMPERE		0xC0
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -112,6 +113,8 @@
 #define APPLE_CPU_PART_M1_ICESTORM	0x022
 #define APPLE_CPU_PART_M1_FIRESTORM	0x023
 
+#define AMPERE_CPU_PART_AMPERE1		0xAC3
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -151,6 +154,7 @@
 #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
 #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM)
 #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM)
+#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
 
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -868,6 +868,10 @@ u8 spectre_bhb_loop_affected(int scope)
 			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
 			{},
 		};
+		static const struct midr_range spectre_bhb_k11_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+			{},
+		};
 		static const struct midr_range spectre_bhb_k8_list[] = {
 			MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
 			MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
@@ -878,6 +882,8 @@ u8 spectre_bhb_loop_affected(int scope)
 			k = 32;
 		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list))
 			k = 24;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k11_list))
+			k = 11;
 		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list))
 			k =  8;
 

[PATCH 5.15 127/132] scsi: sd: Revert "scsi: sd: Remove a local variable"

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

This reverts commit 84f7a9de0602704bbec774a6c7f7c8c4994bee9c.

Because it introduces a problem that rq->__data_len is set to the wrong
value.

before the patch:
1) nr_bytes = rq->__data_len
2) rq->__data_len = sdp->sector_size
3) scsi_init_io()
4) rq->__data_len = nr_bytes

after the patch:
1) rq->__data_len = sdp->sector_size
2) scsi_init_io()
3) rq->__data_len = rq->__data_len -> __data_len is wrong

It will cause that io can only complete one segment each time, and the io
will requeue in scsi_io_completion_action(), which will cause severe
performance degradation.

Scsi write same is removed in commit e383e16e84e9 ("scsi: sd: Remove
WRITE_SAME support") from mainline, hence this patch is only needed for
stable kernels.

Fixes: 84f7a9de0602 ("scsi: sd: Remove a local variable")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/sd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1072,6 +1072,7 @@ static blk_status_t sd_setup_write_same_
 	struct bio *bio = rq->bio;
 	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
+	unsigned int nr_bytes = blk_rq_bytes(rq);
 	blk_status_t ret;
 
 	if (sdkp->device->no_write_same)
@@ -1108,7 +1109,7 @@ static blk_status_t sd_setup_write_same_
 	 */
 	rq->__data_len = sdp->sector_size;
 	ret = scsi_alloc_sgtables(cmd);
-	rq->__data_len = blk_rq_bytes(rq);
+	rq->__data_len = nr_bytes;
 
 	return ret;
 }

[PATCH 5.15 128/132] can: rcar_canfd: fix channel specific IRQ handling for RZ/G2L

[Greg Kroah-Hartman]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit d887087c896881715c1a82f1d4f71fbfe5344ffd upstream.

RZ/G2L has separate channel specific IRQs for transmit and error
interrupts. But the IRQ handler processes both channels, even if there
no interrupt occurred on one of the channels.

This patch fixes the issue by passing a channel specific context
parameter instead of global one for the IRQ register and the IRQ
handler, it just handles the channel which is triggered the interrupt.

Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/all/20221025155657.1426948-3-biju.das.jz@bp.renesas.com
Cc: stable@vger.kernel.org
[mkl: adjust commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[biju: fixed the conflicts manually]
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/rcar/rcar_canfd.c |   18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1195,11 +1195,9 @@ static void rcar_canfd_handle_channel_tx
 
 static irqreturn_t rcar_canfd_channel_tx_interrupt(int irq, void *dev_id)
 {
-	struct rcar_canfd_global *gpriv = dev_id;
-	u32 ch;
+	struct rcar_canfd_channel *priv = dev_id;
 
-	for_each_set_bit(ch, &gpriv->channels_mask, RCANFD_NUM_CHANNELS)
-		rcar_canfd_handle_channel_tx(gpriv, ch);
+	rcar_canfd_handle_channel_tx(priv->gpriv, priv->channel);
 
 	return IRQ_HANDLED;
 }
@@ -1227,11 +1225,9 @@ static void rcar_canfd_handle_channel_er
 
 static irqreturn_t rcar_canfd_channel_err_interrupt(int irq, void *dev_id)
 {
-	struct rcar_canfd_global *gpriv = dev_id;
-	u32 ch;
+	struct rcar_canfd_channel *priv = dev_id;
 
-	for_each_set_bit(ch, &gpriv->channels_mask, RCANFD_NUM_CHANNELS)
-		rcar_canfd_handle_channel_err(gpriv, ch);
+	rcar_canfd_handle_channel_err(priv->gpriv, priv->channel);
 
 	return IRQ_HANDLED;
 }
@@ -1649,6 +1645,7 @@ static int rcar_canfd_channel_probe(stru
 	priv->ndev = ndev;
 	priv->base = gpriv->base;
 	priv->channel = ch;
+	priv->gpriv = gpriv;
 	priv->can.clock.freq = fcan_freq;
 	dev_info(&pdev->dev, "can_clk rate is %u\n", priv->can.clock.freq);
 
@@ -1677,7 +1674,7 @@ static int rcar_canfd_channel_probe(stru
 		}
 		err = devm_request_irq(&pdev->dev, err_irq,
 				       rcar_canfd_channel_err_interrupt, 0,
-				       irq_name, gpriv);
+				       irq_name, priv);
 		if (err) {
 			dev_err(&pdev->dev, "devm_request_irq CH Err(%d) failed, error %d\n",
 				err_irq, err);
@@ -1691,7 +1688,7 @@ static int rcar_canfd_channel_probe(stru
 		}
 		err = devm_request_irq(&pdev->dev, tx_irq,
 				       rcar_canfd_channel_tx_interrupt, 0,
-				       irq_name, gpriv);
+				       irq_name, priv);
 		if (err) {
 			dev_err(&pdev->dev, "devm_request_irq Tx (%d) failed, error %d\n",
 				tx_irq, err);
@@ -1715,7 +1712,6 @@ static int rcar_canfd_channel_probe(stru
 
 	priv->can.do_set_mode = rcar_canfd_do_set_mode;
 	priv->can.do_get_berr_counter = rcar_canfd_get_berr_counter;
-	priv->gpriv = gpriv;
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 
 	netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll,

[PATCH 5.15 129/132] can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive

[Greg Kroah-Hartman]

From: Biju Das <biju.das.jz@bp.renesas.com>

commit 702de2c21eed04c67cefaaedc248ef16e5f6b293 upstream.

We are seeing an IRQ storm on the global receive IRQ line under heavy
CAN bus load conditions with both CAN channels enabled.

Conditions:

The global receive IRQ line is shared between can0 and can1, either of
the channels can trigger interrupt while the other channel's IRQ line
is disabled (RFIE).

When global a receive IRQ interrupt occurs, we mask the interrupt in
the IRQ handler. Clearing and unmasking of the interrupt is happening
in rx_poll(). There is a race condition where rx_poll() unmasks the
interrupt, but the next IRQ handler does not mask the IRQ due to
NAPIF_STATE_MISSED flag (e.g.: can0 RX FIFO interrupt is disabled and
can1 is triggering RX interrupt, the delay in rx_poll() processing
results in setting NAPIF_STATE_MISSED flag) leading to an IRQ storm.

This patch fixes the issue by checking IRQ active and enabled before
handling the IRQ on a particular channel.

Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/all/20221025155657.1426948-2-biju.das.jz@bp.renesas.com
Cc: stable@vger.kernel.org
[mkl: adjust commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[biju: removed gpriv from RCANFD_RFCC_RFIE macro]
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/rcar/rcar_canfd.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1106,11 +1106,13 @@ static void rcar_canfd_handle_global_rec
 {
 	struct rcar_canfd_channel *priv = gpriv->ch[ch];
 	u32 ridx = ch + RCANFD_RFFIFO_IDX;
-	u32 sts;
+	u32 sts, cc;
 
 	/* Handle Rx interrupts */
 	sts = rcar_canfd_read(priv->base, RCANFD_RFSTS(ridx));
-	if (likely(sts & RCANFD_RFSTS_RFIF)) {
+	cc = rcar_canfd_read(priv->base, RCANFD_RFCC(ridx));
+	if (likely(sts & RCANFD_RFSTS_RFIF &&
+		   cc & RCANFD_RFCC_RFIE)) {
 		if (napi_schedule_prep(&priv->napi)) {
 			/* Disable Rx FIFO interrupts */
 			rcar_canfd_clear_bit(priv->base,

[PATCH 5.15 130/132] serial: core: move RS485 configuration tasks from drivers into core

[Greg Kroah-Hartman]

From: Lino Sanfilippo <LinoSanfilippo@gmx.de>

commit 0ed12afa5655512ee418047fb3546d229df20aa1 upstream.

Several drivers that support setting the RS485 configuration via userspace
implement one or more of the following tasks:

- in case of an invalid RTS configuration (both RTS after send and RTS on
  send set or both unset) fall back to enable RTS on send and disable RTS
  after send

- nullify the padding field of the returned serial_rs485 struct

- copy the configuration into the uart port struct

- limit RTS delays to 100 ms

Move these tasks into the serial core to make them generic and to provide
a consistent behaviour among all drivers.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20220410104642.32195-2-LinoSanfilippo@gmx.de
Signed-off-by: Daisuke Mizobuchi <mizo@atmark-techno.com>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/serial_core.c |   33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -42,6 +42,11 @@ static struct lock_class_key port_lock_k
 
 #define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
 
+/*
+ * Max time with active RTS before/after data is sent.
+ */
+#define RS485_MAX_RTS_DELAY	100 /* msecs */
+
 static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
 					struct ktermios *old_termios);
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
@@ -1299,8 +1304,36 @@ static int uart_set_rs485_config(struct
 	if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user)))
 		return -EFAULT;
 
+	/* pick sane settings if the user hasn't */
+	if (!(rs485.flags & SER_RS485_RTS_ON_SEND) ==
+	    !(rs485.flags & SER_RS485_RTS_AFTER_SEND)) {
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n",
+			port->name, port->line);
+		rs485.flags |= SER_RS485_RTS_ON_SEND;
+		rs485.flags &= ~SER_RS485_RTS_AFTER_SEND;
+	}
+
+	if (rs485.delay_rts_before_send > RS485_MAX_RTS_DELAY) {
+		rs485.delay_rts_before_send = RS485_MAX_RTS_DELAY;
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): RTS delay before sending clamped to %u ms\n",
+			port->name, port->line, rs485.delay_rts_before_send);
+	}
+
+	if (rs485.delay_rts_after_send > RS485_MAX_RTS_DELAY) {
+		rs485.delay_rts_after_send = RS485_MAX_RTS_DELAY;
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): RTS delay after sending clamped to %u ms\n",
+			port->name, port->line, rs485.delay_rts_after_send);
+	}
+	/* Return clean padding area to userspace */
+	memset(rs485.padding, 0, sizeof(rs485.padding));
+
 	spin_lock_irqsave(&port->lock, flags);
 	ret = port->rs485_config(port, &rs485);
+	if (!ret)
+		port->rs485 = rs485;
 	spin_unlock_irqrestore(&port->lock, flags);
 	if (ret)
 		return ret;

[PATCH 5.15 131/132] serial: Deassert Transmit Enable on probe in driver-specific way

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit 7c7f9bc986e698873b489c371a08f206979d06b7 upstream.

When a UART port is newly registered, uart_configure_port() seeks to
deassert RS485 Transmit Enable by setting the RTS bit in port->mctrl.
However a number of UART drivers interpret a set RTS bit as *assertion*
instead of deassertion:  Affected drivers include those using
serial8250_em485_config() (except 8250_bcm2835aux.c) and some using
mctrl_gpio (e.g. imx.c).

Since the interpretation of the RTS bit is driver-specific, it is not
suitable as a means to centrally deassert Transmit Enable in the serial
core.  Instead, the serial core must call on drivers to deassert it in
their driver-specific way.  One way to achieve that is to call
->rs485_config().  It implicitly deasserts Transmit Enable.

So amend uart_configure_port() and uart_resume_port() to invoke
uart_rs485_config().  That allows removing calls to uart_rs485_config()
from drivers' ->probe() hooks and declaring the function static.

Skip any invocation of ->set_mctrl() if RS485 is enabled.  RS485 has no
hardware flow control, so the modem control lines are irrelevant and
need not be touched.  When leaving RS485 mode, reset the modem control
lines to the state stored in port->mctrl.  That way, UARTs which are
muxed between RS485 and RS232 transceivers drive the lines correctly
when switched to RS232.  (serial8250_do_startup() historically raises
the OUT1 modem signal because otherwise interrupts are not signaled on
ancient PC UARTs, but I believe that no longer applies to modern,
RS485-capable UARTs and is thus safe to be skipped.)

imx.c modifies port->mctrl whenever Transmit Enable is asserted and
deasserted.  Stop it from doing that so port->mctrl reflects the RS232
line state.

8250_omap.c deasserts Transmit Enable on ->runtime_resume() by calling
->set_mctrl().  Because that is now a no-op in RS485 mode, amend the
function to call serial8250_em485_stop_tx().

fsl_lpuart.c retrieves and applies the RS485 device tree properties
after registering the UART port.  Because applying now happens on
registration in uart_configure_port(), move retrieval of the properties
ahead of uart_add_one_port().

Link: https://lore.kernel.org/all/20220329085050.311408-1-matthias.schiffer@ew.tq-group.com/
Link: https://lore.kernel.org/all/8f538a8903795f22f9acc94a9a31b03c9c4ccacb.camel@ginzinger.com/
Fixes: d3b3404df318 ("serial: Fix incorrect rs485 polarity on uart open")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reported-by: Roosen Henri <Henri.Roosen@ginzinger.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/2de36eba3fbe11278d5002e4e501afe0ceaca039.1663863805.git.lukas@wunner.de
Signed-off-by: Daisuke Mizobuchi <mizo@atmark-techno.com>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_omap.c |    3 +++
 drivers/tty/serial/8250/8250_pci.c  |    9 +--------
 drivers/tty/serial/8250/8250_port.c |   12 +++++++-----
 drivers/tty/serial/fsl_lpuart.c     |    8 +++-----
 drivers/tty/serial/imx.c            |    8 ++------
 drivers/tty/serial/serial_core.c    |   30 +++++++++++++++++-------------
 6 files changed, 33 insertions(+), 37 deletions(-)

--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -342,6 +342,9 @@ static void omap8250_restore_regs(struct
 	omap8250_update_mdr1(up, priv);
 
 	up->port.ops->set_mctrl(&up->port, up->port.mctrl);
+
+	if (up->port.rs485.flags & SER_RS485_ENABLED)
+		serial8250_em485_stop_tx(up);
 }
 
 /*
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1739,7 +1739,6 @@ static int pci_fintek_init(struct pci_de
 	resource_size_t bar_data[3];
 	u8 config_base;
 	struct serial_private *priv = pci_get_drvdata(dev);
-	struct uart_8250_port *port;
 
 	if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) ||
 			!(pci_resource_flags(dev, 4) & IORESOURCE_IO) ||
@@ -1786,13 +1785,7 @@ static int pci_fintek_init(struct pci_de
 
 		pci_write_config_byte(dev, config_base + 0x06, dev->irq);
 
-		if (priv) {
-			/* re-apply RS232/485 mode when
-			 * pciserial_resume_ports()
-			 */
-			port = serial8250_get_port(priv->line[i]);
-			pci_fintek_rs485_config(&port->port, NULL);
-		} else {
+		if (!priv) {
 			/* First init without port data
 			 * force init to RS232 Mode
 			 */
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -600,7 +600,7 @@ EXPORT_SYMBOL_GPL(serial8250_rpm_put);
 static int serial8250_em485_init(struct uart_8250_port *p)
 {
 	if (p->em485)
-		return 0;
+		goto deassert_rts;
 
 	p->em485 = kmalloc(sizeof(struct uart_8250_em485), GFP_ATOMIC);
 	if (!p->em485)
@@ -616,7 +616,9 @@ static int serial8250_em485_init(struct
 	p->em485->active_timer = NULL;
 	p->em485->tx_stopped = true;
 
-	p->rs485_stop_tx(p);
+deassert_rts:
+	if (p->em485->tx_stopped)
+		p->rs485_stop_tx(p);
 
 	return 0;
 }
@@ -2034,6 +2036,9 @@ EXPORT_SYMBOL_GPL(serial8250_do_set_mctr
 
 static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
+	if (port->rs485.flags & SER_RS485_ENABLED)
+		return;
+
 	if (port->set_mctrl)
 		port->set_mctrl(port, mctrl);
 	else
@@ -3191,9 +3196,6 @@ static void serial8250_config_port(struc
 	if (flags & UART_CONFIG_TYPE)
 		autoconfig(up);
 
-	if (port->rs485.flags & SER_RS485_ENABLED)
-		port->rs485_config(port, &port->rs485);
-
 	/* if access method is AU, it is a 16550 with a quirk */
 	if (port->type == PORT_16550A && port->iotype == UPIO_AU)
 		up->bugs |= UART_BUG_NOMSR;
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2733,10 +2733,6 @@ static int lpuart_probe(struct platform_
 	if (ret)
 		goto failed_reset;
 
-	ret = uart_add_one_port(&lpuart_reg, &sport->port);
-	if (ret)
-		goto failed_attach_port;
-
 	ret = uart_get_rs485_mode(&sport->port);
 	if (ret)
 		goto failed_get_rs485;
@@ -2748,7 +2744,9 @@ static int lpuart_probe(struct platform_
 	    sport->port.rs485.delay_rts_after_send)
 		dev_err(&pdev->dev, "driver doesn't support RTS delays\n");
 
-	sport->port.rs485_config(&sport->port, &sport->port.rs485);
+	ret = uart_add_one_port(&lpuart_reg, &sport->port);
+	if (ret)
+		goto failed_attach_port;
 
 	ret = devm_request_irq(&pdev->dev, sport->port.irq, handler, 0,
 				DRIVER_NAME, sport);
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -380,8 +380,7 @@ static void imx_uart_rts_active(struct i
 {
 	*ucr2 &= ~(UCR2_CTSC | UCR2_CTS);
 
-	sport->port.mctrl |= TIOCM_RTS;
-	mctrl_gpio_set(sport->gpios, sport->port.mctrl);
+	mctrl_gpio_set(sport->gpios, sport->port.mctrl | TIOCM_RTS);
 }
 
 /* called with port.lock taken and irqs caller dependent */
@@ -390,8 +389,7 @@ static void imx_uart_rts_inactive(struct
 	*ucr2 &= ~UCR2_CTSC;
 	*ucr2 |= UCR2_CTS;
 
-	sport->port.mctrl &= ~TIOCM_RTS;
-	mctrl_gpio_set(sport->gpios, sport->port.mctrl);
+	mctrl_gpio_set(sport->gpios, sport->port.mctrl & ~TIOCM_RTS);
 }
 
 static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec)
@@ -2318,8 +2316,6 @@ static int imx_uart_probe(struct platfor
 		dev_err(&pdev->dev,
 			"low-active RTS not possible when receiver is off, enabling receiver\n");
 
-	imx_uart_rs485_config(&sport->port, &sport->port.rs485);
-
 	/* Disable interrupts before requesting them */
 	ucr1 = imx_uart_readl(sport, UCR1);
 	ucr1 &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN | UCR1_RTSDEN);
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -149,15 +149,10 @@ uart_update_mctrl(struct uart_port *port
 	unsigned long flags;
 	unsigned int old;
 
-	if (port->rs485.flags & SER_RS485_ENABLED) {
-		set &= ~TIOCM_RTS;
-		clear &= ~TIOCM_RTS;
-	}
-
 	spin_lock_irqsave(&port->lock, flags);
 	old = port->mctrl;
 	port->mctrl = (old & ~clear) | set;
-	if (old != port->mctrl)
+	if (old != port->mctrl && !(port->rs485.flags & SER_RS485_ENABLED))
 		port->ops->set_mctrl(port, port->mctrl);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -1332,8 +1327,13 @@ static int uart_set_rs485_config(struct
 
 	spin_lock_irqsave(&port->lock, flags);
 	ret = port->rs485_config(port, &rs485);
-	if (!ret)
+	if (!ret) {
 		port->rs485 = rs485;
+
+		/* Reset RTS and other mctrl lines when disabling RS485 */
+		if (!(rs485.flags & SER_RS485_ENABLED))
+			port->ops->set_mctrl(port, port->mctrl);
+	}
 	spin_unlock_irqrestore(&port->lock, flags);
 	if (ret)
 		return ret;
@@ -2306,7 +2306,8 @@ int uart_resume_port(struct uart_driver
 
 		uart_change_pm(state, UART_PM_STATE_ON);
 		spin_lock_irq(&uport->lock);
-		ops->set_mctrl(uport, 0);
+		if (!(uport->rs485.flags & SER_RS485_ENABLED))
+			ops->set_mctrl(uport, 0);
 		spin_unlock_irq(&uport->lock);
 		if (console_suspend_enabled || !uart_console(uport)) {
 			/* Protected by port mutex for now */
@@ -2317,7 +2318,10 @@ int uart_resume_port(struct uart_driver
 				if (tty)
 					uart_change_speed(tty, state, NULL);
 				spin_lock_irq(&uport->lock);
-				ops->set_mctrl(uport, uport->mctrl);
+				if (!(uport->rs485.flags & SER_RS485_ENABLED))
+					ops->set_mctrl(uport, uport->mctrl);
+				else
+					uport->rs485_config(uport, &uport->rs485);
 				ops->start_tx(uport);
 				spin_unlock_irq(&uport->lock);
 				tty_port_set_initialized(port, 1);
@@ -2423,10 +2427,10 @@ uart_configure_port(struct uart_driver *
 		 */
 		spin_lock_irqsave(&port->lock, flags);
 		port->mctrl &= TIOCM_DTR;
-		if (port->rs485.flags & SER_RS485_ENABLED &&
-		    !(port->rs485.flags & SER_RS485_RTS_AFTER_SEND))
-			port->mctrl |= TIOCM_RTS;
-		port->ops->set_mctrl(port, port->mctrl);
+		if (!(port->rs485.flags & SER_RS485_ENABLED))
+			port->ops->set_mctrl(port, port->mctrl);
+		else
+			port->rs485_config(port, &port->rs485);
 		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*

[PATCH 5.15 132/132] tcp/udp: Fix memory leak in ipv6_renew_options().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

commit 3c52c6bb831f6335c176a0fc7214e26f43adbd11 upstream.

syzbot reported a memory leak [0] related to IPV6_ADDRFORM.

The scenario is that while one thread is converting an IPv6 socket into
IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and
allocates memory to inet6_sk(sk)->XXX after conversion.

Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources,
which inet6_destroy_sock() should have cleaned up.

setsockopt(IPV6_ADDRFORM)                 setsockopt(IPV6_DSTOPTS)
+-----------------------+                 +----------------------+
- do_ipv6_setsockopt(sk, ...)
  - sockopt_lock_sock(sk)                 - do_ipv6_setsockopt(sk, ...)
    - lock_sock(sk)                         ^._ called via tcpv6_prot
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)          before WRITE_ONCE()
  - xchg(&np->opt, NULL)
  - txopt_put(opt)
  - sockopt_release_sock(sk)
    - release_sock(sk)                      - sockopt_lock_sock(sk)
                                              - lock_sock(sk)
                                            - ipv6_set_opt_hdr(sk, ...)
                                              - ipv6_update_options(sk, opt)
                                                - xchg(&inet6_sk(sk)->opt, opt)
                                                  ^._ opt is never freed.

                                            - sockopt_release_sock(sk)
                                              - release_sock(sk)

Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this
memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after
acquiring the lock.

This issue exists from the initial commit between IPV6_ADDRFORM and
IPV6_PKTOPTIONS.

[0]:
BUG: memory leak
unreferenced object 0xffff888009ab9f80 (size 96):
  comm "syz-executor583", pid 328, jiffies 4294916198 (age 13.034s)
  hex dump (first 32 bytes):
    01 00 00 00 48 00 00 00 08 00 00 00 00 00 00 00  ....H...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002ee98ae1>] kmalloc include/linux/slab.h:605 [inline]
    [<000000002ee98ae1>] sock_kmalloc+0xb3/0x100 net/core/sock.c:2566
    [<0000000065d7b698>] ipv6_renew_options+0x21e/0x10b0 net/ipv6/exthdrs.c:1318
    [<00000000a8c756d7>] ipv6_set_opt_hdr net/ipv6/ipv6_sockglue.c:354 [inline]
    [<00000000a8c756d7>] do_ipv6_setsockopt.constprop.0+0x28b7/0x4350 net/ipv6/ipv6_sockglue.c:668
    [<000000002854d204>] ipv6_setsockopt+0xdf/0x190 net/ipv6/ipv6_sockglue.c:1021
    [<00000000e69fdcf8>] tcp_setsockopt+0x13b/0x2620 net/ipv4/tcp.c:3789
    [<0000000090da4b9b>] __sys_setsockopt+0x239/0x620 net/socket.c:2252
    [<00000000b10d192f>] __do_sys_setsockopt net/socket.c:2263 [inline]
    [<00000000b10d192f>] __se_sys_setsockopt net/socket.c:2260 [inline]
    [<00000000b10d192f>] __x64_sys_setsockopt+0xbe/0x160 net/socket.c:2260
    [<000000000a80d7aa>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<000000000a80d7aa>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
    [<000000004562b5c6>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Meena Shanmugam <meenashanmugam@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ipv6_sockglue.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -417,6 +417,12 @@ static int do_ipv6_setsockopt(struct soc
 		rtnl_lock();
 	lock_sock(sk);
 
+	/* Another thread has converted the socket into IPv4 with
+	 * IPV6_ADDRFORM concurrently.
+	 */
+	if (unlikely(sk->sk_family != AF_INET6))
+		goto unlock;
+
 	switch (optname) {
 
 	case IPV6_ADDRFORM:
@@ -976,6 +982,7 @@ done:
 		break;
 	}
 
+unlock:
 	release_sock(sk);
 	if (needs_rtnl)
 		rtnl_unlock();

Re: [PATCH 5.15 000/132] 5.15.77-rc1 review

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 542 bytes --]

On Wed, Nov 02, 2022 at 03:31:46AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.77 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and
powerpc (ps3_defconfig, GCC 12.2.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
 

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 5.15 000/132] 5.15.77-rc1 review

[Jon Hunter]

On Wed, 02 Nov 2022 03:31:46 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.77 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.77-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.15:
    11 builds:	11 pass, 0 fail
    28 boots:	28 pass, 0 fail
    114 tests:	114 pass, 0 fail

Linux version:	5.15.77-rc1-g55ed865a9c8f
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.15 000/132] 5.15.77-rc1 review

[Florian Fainelli]

On 11/1/22 19:31, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.77 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.77-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.15 000/132] 5.15.77-rc1 review

[Guenter Roeck]

On Wed, Nov 02, 2022 at 03:31:46AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.77 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 154 pass: 154 fail: 0
Qemu test results:
	total: 489 pass: 489 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.15 000/132] 5.15.77-rc1 review

[Ron Economos]

On 11/1/22 7:31 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.77 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.77-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 5.15 000/132] 5.15.77-rc1 review

[Allen Pais]

> This is the start of the stable review cycle for the 5.15.77 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
>
 Compiled and booted on my x86_64 and ARM64 test systems. No errors or
regressions.

Tested-by: Allen Pais <apais@linux.microsoft.com>

Thanks.

Re: [PATCH 5.15 000/132] 5.15.77-rc1 review

[Naresh Kamboju]

On Wed, 2 Nov 2022 at 08:29, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.77 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.77-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.15.77-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: 55ed865a9c8fe0489641ddc8e9a4ee35d74767aa
* git describe: v5.15.76-133-g55ed865a9c8f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.76-133-g55ed865a9c8f

## No Test Regressions (compared to v5.15.76)

## No Metric Regressions (compared to v5.15.76)

## No Test Fixes (compared to v5.15.76)

## No Metric Fixes (compared to v5.15.76)

## Test result summary
total: 156317, pass: 131770, fail: 4147, skip: 19975, xfail: 425

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 149 total, 148 passed, 1 failed
* arm64: 47 total, 45 passed, 2 failed
* i386: 37 total, 35 passed, 2 failed
* mips: 27 total, 27 passed, 0 failed
* parisc: 6 total, 6 passed, 0 failed
* powerpc: 30 total, 30 passed, 0 failed
* riscv: 10 total, 10 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 12 total, 12 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 40 total, 38 passed, 2 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.15 000/132] 5.15.77-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Wed, Nov 02, 2022 at 03:31:46AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.77 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.

Build test (gcc version 12.2.1 20221016):
mips: 62 configs -> no failure
arm: 99 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
csky allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/2092
[2]. https://openqa.qa.codethink.co.uk/tests/2095

Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

-- 
Regards
Sudip