From: Bagas Sanjaya <bagasdotme@gmail.com> To: Billy Tsai <billy_tsai@aspeedtech.com> Cc: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, joel@jms.id.au, andrew@aj.id.au, lee@kernel.org, thierry.reding@gmail.com, u.kleine-koenig@pengutronix.de, corbet@lwn.net, p.zabel@pengutronix.de, linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org, linux-doc@vger.kernel.org, kernel test robot <lkp@intel.com> Subject: Re: [v4 5/5] hwmon: Add Aspeed ast2600 TACH support Date: Wed, 23 Nov 2022 15:45:46 +0700 [thread overview] Message-ID: <Y33duvUVQ0AJsgAv@debian.me> (raw) In-Reply-To: <20221123061635.32025-6-billy_tsai@aspeedtech.com> [-- Attachment #1: Type: text/plain, Size: 2888 bytes --] On Wed, Nov 23, 2022 at 02:16:35PM +0800, Billy Tsai wrote: > diff --git a/Documentation/hwmon/tach-aspeed-ast2600.rst b/Documentation/hwmon/tach-aspeed-ast2600.rst > new file mode 100644 > index 000000000000..4f9501b783a1 > --- /dev/null > +++ b/Documentation/hwmon/tach-aspeed-ast2600.rst > @@ -0,0 +1,24 @@ > +Kernel driver tach-aspeed-ast2600 > +============================== > + > +Supported chips: > + ASPEED AST2600 > + > +Authors: > + <billy_tsai@aspeedtech.com> > + > +Description: > +------------ > +This driver implements support for ASPEED AST2600 Fan Tacho controller. > +The controller supports up to 16 tachometer inputs. > + > +The driver provides the following sensor accesses in sysfs: > +=============== ======= ===================================================== > +fanX_input ro provide current fan rotation value in RPM as reported > + by the fan to the device. > +fanX_div rw Fan divisor: Supported value are power of 4 (1, 4, 16 > + 64, ... 4194304) > + The larger divisor, the less rpm accuracy and the less > + affected by fan signal glitch. > +fanX_pulses rw Fan pulses per resolution. > +=============== ======= ====================================================== I found htmldocs warnings: Documentation/hwmon/tach-aspeed-ast2600.rst:2: WARNING: Title underline too short. Kernel driver tach-aspeed-ast2600 ============================== Documentation/hwmon/tach-aspeed-ast2600.rst:18: WARNING: Unexpected indentation. Documentation/hwmon/tach-aspeed-ast2600.rst:19: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/hwmon/tach-aspeed-ast2600.rst:23: WARNING: Definition list ends without a blank line; unexpected unindent. I have applied the fixup: ---- >8 ---- diff --git a/Documentation/hwmon/tach-aspeed-ast2600.rst b/Documentation/hwmon/tach-aspeed-ast2600.rst index 4f9501b783a11b..8faa00f6ad47c2 100644 --- a/Documentation/hwmon/tach-aspeed-ast2600.rst +++ b/Documentation/hwmon/tach-aspeed-ast2600.rst @@ -1,5 +1,5 @@ Kernel driver tach-aspeed-ast2600 -============================== +================================= Supported chips: ASPEED AST2600 @@ -13,7 +13,8 @@ This driver implements support for ASPEED AST2600 Fan Tacho controller. The controller supports up to 16 tachometer inputs. The driver provides the following sensor accesses in sysfs: -=============== ======= ===================================================== + +=============== ======= ====================================================== fanX_input ro provide current fan rotation value in RPM as reported by the fan to the device. fanX_div rw Fan divisor: Supported value are power of 4 (1, 4, 16 Thanks. -- An old man doll... just what I always wanted! - Clara [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Bagas Sanjaya <bagasdotme@gmail.com> To: Billy Tsai <billy_tsai@aspeedtech.com> Cc: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, joel@jms.id.au, andrew@aj.id.au, lee@kernel.org, thierry.reding@gmail.com, u.kleine-koenig@pengutronix.de, corbet@lwn.net, p.zabel@pengutronix.de, linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org, linux-doc@vger.kernel.org, kernel test robot <lkp@intel.com> Subject: Re: [v4 5/5] hwmon: Add Aspeed ast2600 TACH support Date: Wed, 23 Nov 2022 15:45:46 +0700 [thread overview] Message-ID: <Y33duvUVQ0AJsgAv@debian.me> (raw) In-Reply-To: <20221123061635.32025-6-billy_tsai@aspeedtech.com> [-- Attachment #1.1: Type: text/plain, Size: 2888 bytes --] On Wed, Nov 23, 2022 at 02:16:35PM +0800, Billy Tsai wrote: > diff --git a/Documentation/hwmon/tach-aspeed-ast2600.rst b/Documentation/hwmon/tach-aspeed-ast2600.rst > new file mode 100644 > index 000000000000..4f9501b783a1 > --- /dev/null > +++ b/Documentation/hwmon/tach-aspeed-ast2600.rst > @@ -0,0 +1,24 @@ > +Kernel driver tach-aspeed-ast2600 > +============================== > + > +Supported chips: > + ASPEED AST2600 > + > +Authors: > + <billy_tsai@aspeedtech.com> > + > +Description: > +------------ > +This driver implements support for ASPEED AST2600 Fan Tacho controller. > +The controller supports up to 16 tachometer inputs. > + > +The driver provides the following sensor accesses in sysfs: > +=============== ======= ===================================================== > +fanX_input ro provide current fan rotation value in RPM as reported > + by the fan to the device. > +fanX_div rw Fan divisor: Supported value are power of 4 (1, 4, 16 > + 64, ... 4194304) > + The larger divisor, the less rpm accuracy and the less > + affected by fan signal glitch. > +fanX_pulses rw Fan pulses per resolution. > +=============== ======= ====================================================== I found htmldocs warnings: Documentation/hwmon/tach-aspeed-ast2600.rst:2: WARNING: Title underline too short. Kernel driver tach-aspeed-ast2600 ============================== Documentation/hwmon/tach-aspeed-ast2600.rst:18: WARNING: Unexpected indentation. Documentation/hwmon/tach-aspeed-ast2600.rst:19: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/hwmon/tach-aspeed-ast2600.rst:23: WARNING: Definition list ends without a blank line; unexpected unindent. I have applied the fixup: ---- >8 ---- diff --git a/Documentation/hwmon/tach-aspeed-ast2600.rst b/Documentation/hwmon/tach-aspeed-ast2600.rst index 4f9501b783a11b..8faa00f6ad47c2 100644 --- a/Documentation/hwmon/tach-aspeed-ast2600.rst +++ b/Documentation/hwmon/tach-aspeed-ast2600.rst @@ -1,5 +1,5 @@ Kernel driver tach-aspeed-ast2600 -============================== +================================= Supported chips: ASPEED AST2600 @@ -13,7 +13,8 @@ This driver implements support for ASPEED AST2600 Fan Tacho controller. The controller supports up to 16 tachometer inputs. The driver provides the following sensor accesses in sysfs: -=============== ======= ===================================================== + +=============== ======= ====================================================== fanX_input ro provide current fan rotation value in RPM as reported by the fan to the device. fanX_div rw Fan divisor: Supported value are power of 4 (1, 4, 16 Thanks. -- An old man doll... just what I always wanted! - Clara [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-23 8:45 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-23 6:16 [v4 0/5] Support pwm/tach driver for aspeed ast26xx Billy Tsai 2022-11-23 6:16 ` Billy Tsai 2022-11-23 6:16 ` [v4 1/5] dt-bindings: mfd: Add aspeed pwm-tach binding Billy Tsai 2022-11-23 6:16 ` Billy Tsai 2022-11-23 8:24 ` Krzysztof Kozlowski 2022-11-23 8:24 ` Krzysztof Kozlowski 2022-11-23 8:27 ` Krzysztof Kozlowski 2022-11-23 8:27 ` Krzysztof Kozlowski 2022-12-09 0:54 ` Billy Tsai 2022-12-09 0:54 ` Billy Tsai 2022-12-09 7:48 ` Krzysztof Kozlowski 2022-12-09 7:48 ` Krzysztof Kozlowski 2023-01-06 3:31 ` Billy Tsai 2023-01-06 3:31 ` Billy Tsai 2023-06-08 6:43 ` Krzysztof Kozlowski 2023-06-08 6:43 ` Krzysztof Kozlowski [not found] ` <SG2PR06MB3365AE9D075601CB62C6E7F78B50A@SG2PR06MB3365.apcprd06.prod.outlook.com> 2023-06-08 7:20 ` Krzysztof Kozlowski 2023-06-08 7:20 ` Krzysztof Kozlowski 2022-11-23 15:07 ` Rob Herring 2022-11-23 15:07 ` Rob Herring 2022-11-23 6:16 ` [v4 2/5] dt-bindings: pwm: Add bindings for aspeed pwm controller Billy Tsai 2022-11-23 6:16 ` Billy Tsai 2022-11-23 8:30 ` Krzysztof Kozlowski 2022-11-23 8:30 ` Krzysztof Kozlowski 2022-11-23 15:07 ` Rob Herring 2022-11-23 15:07 ` Rob Herring 2022-11-23 6:16 ` [v4 3/5] dt-bindings: hwmon: Add bindings for aspeed tach controller Billy Tsai 2022-11-23 6:16 ` Billy Tsai 2022-11-23 8:33 ` Krzysztof Kozlowski 2022-11-23 8:33 ` Krzysztof Kozlowski 2022-11-23 15:21 ` Guenter Roeck 2022-11-23 15:21 ` Guenter Roeck 2022-11-23 6:16 ` [v4 4/5] pwm: Add Aspeed ast2600 PWM support Billy Tsai 2022-11-23 6:16 ` Billy Tsai 2022-11-23 8:43 ` Bagas Sanjaya 2022-11-23 8:43 ` Bagas Sanjaya 2023-04-24 10:12 ` Delphine_CC_Chiu/WYHQ/Wiwynn 2023-04-24 10:12 ` Delphine_CC_Chiu/WYHQ/Wiwynn 2022-11-23 6:16 ` [v4 5/5] hwmon: Add Aspeed ast2600 TACH support Billy Tsai 2022-11-23 6:16 ` Billy Tsai 2022-11-23 8:45 ` Bagas Sanjaya [this message] 2022-11-23 8:45 ` Bagas Sanjaya 2022-11-23 15:44 ` Guenter Roeck 2022-11-23 15:44 ` Guenter Roeck 2022-11-29 7:08 ` Billy Tsai 2022-11-29 7:08 ` Billy Tsai 2022-11-29 15:06 ` Guenter Roeck 2022-11-29 15:06 ` Guenter Roeck 2023-01-17 21:48 ` [v4 0/5] Support pwm/tach driver for aspeed ast26xx Uwe Kleine-König 2023-01-17 21:48 ` Uwe Kleine-König 2023-01-18 1:48 ` Billy Tsai 2023-01-18 1:48 ` Billy Tsai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=Y33duvUVQ0AJsgAv@debian.me \ --to=bagasdotme@gmail.com \ --cc=andrew@aj.id.au \ --cc=billy_tsai@aspeedtech.com \ --cc=corbet@lwn.net \ --cc=devicetree@vger.kernel.org \ --cc=jdelvare@suse.com \ --cc=joel@jms.id.au \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lee@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=lkp@intel.com \ --cc=p.zabel@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=thierry.reding@gmail.com \ --cc=u.kleine-koenig@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.