* [PATCH] riscv: defconfig: add SERIAL_8250_DW
@ 2022-11-19 12:19 ` Corentin Labbe
0 siblings, 0 replies; 6+ messages in thread
From: Corentin Labbe @ 2022-11-19 12:19 UTC (permalink / raw)
To: aou, palmer, paul.walmsley; +Cc: linux-kernel, linux-riscv, Corentin Labbe
jh7100-starfive-visionfive-v1 DTB was recently added, but all my try to
boot it in kernelCI failed.
This is due to a missing serial driver in defconfig.
So let's add CONFIG_SERIAL_8250_DW which is needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
arch/riscv/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index f7f32448f160..9a35ff88bec2 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -123,6 +123,7 @@ CONFIG_MICROSEMI_PHY=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_VIRTIO_CONSOLE=y
--
2.37.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] riscv: defconfig: add SERIAL_8250_DW
@ 2022-11-19 12:19 ` Corentin Labbe
0 siblings, 0 replies; 6+ messages in thread
From: Corentin Labbe @ 2022-11-19 12:19 UTC (permalink / raw)
To: aou, palmer, paul.walmsley; +Cc: linux-kernel, linux-riscv, Corentin Labbe
jh7100-starfive-visionfive-v1 DTB was recently added, but all my try to
boot it in kernelCI failed.
This is due to a missing serial driver in defconfig.
So let's add CONFIG_SERIAL_8250_DW which is needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
arch/riscv/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index f7f32448f160..9a35ff88bec2 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -123,6 +123,7 @@ CONFIG_MICROSEMI_PHY=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_VIRTIO_CONSOLE=y
--
2.37.4
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] riscv: defconfig: add SERIAL_8250_DW
2022-11-19 12:19 ` Corentin Labbe
@ 2022-11-19 12:28 ` Conor Dooley
-1 siblings, 0 replies; 6+ messages in thread
From: Conor Dooley @ 2022-11-19 12:28 UTC (permalink / raw)
To: Corentin Labbe; +Cc: aou, palmer, paul.walmsley, linux-kernel, linux-riscv
On Sat, Nov 19, 2022 at 12:19:53PM +0000, Corentin Labbe wrote:
> jh7100-starfive-visionfive-v1 DTB was recently added, but all my try to
> boot it in kernelCI failed.
> This is due to a missing serial driver in defconfig.
> So let's add CONFIG_SERIAL_8250_DW which is needed.
>
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
See here also, StarFive guys posted the same patch:
https://lore.kernel.org/linux-riscv/Y3d0tL6UoAbdhHKE@spud/
I'll try to harangue Palmer into picking up one for v6.2 & if it
happens to be this one:
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
> ---
> arch/riscv/configs/defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> index f7f32448f160..9a35ff88bec2 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -123,6 +123,7 @@ CONFIG_MICROSEMI_PHY=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_DW=y
> CONFIG_SERIAL_OF_PLATFORM=y
> CONFIG_SERIAL_SH_SCI=y
> CONFIG_VIRTIO_CONSOLE=y
> --
> 2.37.4
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] riscv: defconfig: add SERIAL_8250_DW
@ 2022-11-19 12:28 ` Conor Dooley
0 siblings, 0 replies; 6+ messages in thread
From: Conor Dooley @ 2022-11-19 12:28 UTC (permalink / raw)
To: Corentin Labbe; +Cc: aou, palmer, paul.walmsley, linux-kernel, linux-riscv
On Sat, Nov 19, 2022 at 12:19:53PM +0000, Corentin Labbe wrote:
> jh7100-starfive-visionfive-v1 DTB was recently added, but all my try to
> boot it in kernelCI failed.
> This is due to a missing serial driver in defconfig.
> So let's add CONFIG_SERIAL_8250_DW which is needed.
>
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
See here also, StarFive guys posted the same patch:
https://lore.kernel.org/linux-riscv/Y3d0tL6UoAbdhHKE@spud/
I'll try to harangue Palmer into picking up one for v6.2 & if it
happens to be this one:
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
> ---
> arch/riscv/configs/defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> index f7f32448f160..9a35ff88bec2 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -123,6 +123,7 @@ CONFIG_MICROSEMI_PHY=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_DW=y
> CONFIG_SERIAL_OF_PLATFORM=y
> CONFIG_SERIAL_SH_SCI=y
> CONFIG_VIRTIO_CONSOLE=y
> --
> 2.37.4
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] riscv: defconfig: add SERIAL_8250_DW
2022-11-19 12:19 ` Corentin Labbe
@ 2022-11-21 8:13 ` Ben Dooks
-1 siblings, 0 replies; 6+ messages in thread
From: Ben Dooks @ 2022-11-21 8:13 UTC (permalink / raw)
To: Corentin Labbe, aou, palmer, paul.walmsley; +Cc: linux-kernel, linux-riscv
On 19/11/2022 12:19, Corentin Labbe wrote:
> jh7100-starfive-visionfive-v1 DTB was recently added, but all my try to
> boot it in kernelCI failed.
> This is due to a missing serial driver in defconfig.
> So let's add CONFIG_SERIAL_8250_DW which is needed.
This block is an extended 16550, so not sure why the 16550/8250
driver isn't being used as a backup in case the DesingWare variant
isn't there.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
https://www.codethink.co.uk/privacy.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] riscv: defconfig: add SERIAL_8250_DW
@ 2022-11-21 8:13 ` Ben Dooks
0 siblings, 0 replies; 6+ messages in thread
From: Ben Dooks @ 2022-11-21 8:13 UTC (permalink / raw)
To: Corentin Labbe, aou, palmer, paul.walmsley; +Cc: linux-kernel, linux-riscv
On 19/11/2022 12:19, Corentin Labbe wrote:
> jh7100-starfive-visionfive-v1 DTB was recently added, but all my try to
> boot it in kernelCI failed.
> This is due to a missing serial driver in defconfig.
> So let's add CONFIG_SERIAL_8250_DW which is needed.
This block is an extended 16550, so not sure why the 16550/8250
driver isn't being used as a backup in case the DesingWare variant
isn't there.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
https://www.codethink.co.uk/privacy.html
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-11-21 8:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-19 12:19 [PATCH] riscv: defconfig: add SERIAL_8250_DW Corentin Labbe
2022-11-19 12:19 ` Corentin Labbe
2022-11-19 12:28 ` Conor Dooley
2022-11-19 12:28 ` Conor Dooley
2022-11-21 8:13 ` Ben Dooks
2022-11-21 8:13 ` Ben Dooks
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.