* [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps
@ 2022-11-23 5:58 Dave Chinner
2022-11-23 5:58 ` [PATCH 1/9] xfs: write page faults in iomap are not buffered writes Dave Chinner
` (10 more replies)
0 siblings, 11 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
Recently a customer workload encountered a data corruption in a
specific multi-threaded write operation. The workload combined
racing unaligned adjacent buffered writes with low memory conditions
that caused both writeback and memory reclaim to race with the
writes.
The result of this was random partial blocks containing zeroes
instead of the correct data. The underlying problem is that iomap
caches the write iomap for the duration of the write() operation,
but it fails to take into account that the extent underlying the
iomap can change whilst the write is in progress.
The short story is that an iomap can span mutliple folios, and so
under low memory writeback can be cleaning folios the write()
overlaps. Whilst the overlapping data is cached in memory, this
isn't a problem, but because the folios are now clean they can be
reclaimed. Once reclaimed, the write() does the wrong thing when
re-instantiating partial folios because the iomap no longer reflects
the underlying state of the extent. e.g. it thinks the extent is
unwritten, so it zeroes the partial range, when in fact the
underlying extent is now written and so it should have read the data
from disk. This is how we get random zero ranges in the file
instead of the correct data.
The gory details of the race condition can be found here:
https://lore.kernel.org/linux-xfs/20220817093627.GZ3600936@dread.disaster.area/
Fixing the problem has two aspects. The first aspect of the problem
is ensuring that iomap can detect a stale cached iomap during a
write in a race-free manner. We already do this stale iomap
detection in the writeback path, so we have a mechanism for
detecting that the iomap backing the data range may have changed
and needs to be remapped.
In the case of the write() path, we have to ensure that the iomap is
validated at a point in time when the page cache is stable and
cannot be reclaimed from under us. We also need to validate the
extent before we start performing any modifications to the folio
state or contents. Combine these two requirements together, and the
only "safe" place to validate the iomap is after we have looked up
and locked the folio we are going to copy the data into, but before
we've performed any initialisation operations on that folio.
If the iomap fails validation, we then mark it stale, unlock the
folio and end the write. This effectively means a stale iomap
results in a short write. Filesystems should already be able to
handle this, as write operations can end short for many reasons and
need to iterate through another mapping cycle to be completed. Hence
the iomap changes needed to detect and handle stale iomaps during
write() operations is relatively simple....
However, the assumption is that filesystems should already be able
to handle write failures safely, and that's where the second
(first?) part of the problem exists. That is, handling a partial
write is harder than just "punching out the unused delayed
allocation extent". This is because mmap() based faults can race
with writes, and if they land in the delalloc region that the write
allocated, then punching out the delalloc region can cause data
corruption.
This data corruption problem is exposed by generic/346 when iomap is
converted to detect stale iomaps during write() operations. Hence
write failure in the filesytems needs to handle the fact that the
write() in progress doesn't necessarily own the data in the page
cache over the range of the delalloc extent it just allocated.
As a result, we can't just truncate the page cache over the range
the write() didn't reach and punch all the delalloc extent. We have
to walk the page cache over the untouched range and skip over any
dirty data region in the cache in that range. Which is ....
non-trivial.
That is, iterating the page cache has to handle partially populated
folios (i.e. block size < page size) that contain data. The data
might be discontiguous within a folio. Indeed, there might be
*multiple* discontiguous data regions within a single folio. And to
make matters more complex, multi-page folios mean we just don't know
how many sub-folio regions we might have to iterate to find all
these regions. All the corner cases between the conversions and
rounding between filesystem block size, folio size and multi-page
folio size combined with unaligned write offsets kept breaking my
brain.
Eventually, I realised that if the XFS code tracked the processed
write regions by byte ranges instead of fileysetm block or page
cache index, we could simply use mapping_seek_hole_data() to find
the start and end of each discrete data region within the range we
needed to scan. SEEK_DATA finds the start of the cached data region,
SEEK_HOLE finds the end of the region. THese are byte based
interfaces that understand partially uptodate folio regions, and so
can iterate discrete sub-folio data regions directly. This largely
solved the problem of discovering the dirty regions we need to keep
the delalloc extent over.
Of course, now xfs/196 fails. This is a error injection test that is
supposed to exercise the delalloc extent recover code that the above
fixes just completely reworked. the error injection assumes that it
can just truncate the page cache over the write and then punch out
the delalloc extent completely. This is fundamentally broken, and
only has been working by chance - the chance is that writes are page
aligned and page aligned writes don't install large folios in the
page cache.
IOWs, with sub-folio block size, and not know what size folios are
in the cache, we can't actually guarantee that we can remove the
cached dirty folios from the cache via truncation, and hence the new
code will not remove the delalloc extents under those dirty folios.
As a result the error injection results is writing zeroes to disk
rather that removing the delalloc extents from memory. I can't make
this error injection to work the way it was intended, so I removed
it. The code that it is supposed to exercise is now exercised every time we
detect a stale iomap, so we have much better coverage of the failed
write error handling than the error injection provides us with,
anyway....
So, this passes fstests on 1kb and 4kb block sizes and the data
corruption reproducer does not detect data corruption, so this set
of fixes is /finally/ something I'd consider ready for merge.
Comments and testing welcome!
-Dave.
Version 4:
- fix corner case where up to date blocks beyond EOF on a dirty folio don't get
punched out.
- add comment explaining the "scan for data only to EOF" logic that fixes the
above corner case.
- cleaned up some comments to be more clearer.
- "loff_t pos, not offset" conversion.
- use i_blocksize(inode) rather than open coding.
- remove "if (seq)" check in xfs_iomap_write_direct() as seq is always set by
callers.
Version 3:
- https://lore.kernel.org/linux-xfs/20221117055810.498014-1-david@fromorbit.com/
- Rearrange the deck chairs.
- Remove mapping_seek_hole_data() export.
- move code to iomap to allow mapping_seek_hole_data() not to be exported.
- add export to iomap to allow filesystems access to functionality that
uses mapping_seek_hole_data().
- add punch callback to iomap export to allow filesystem specific functionality
for ranges found with mapping_seek_hole_data().
- call the new iomap export from from filesystem ->iomap_end callback so that
iomap can call back into the filesystem again to do the stuff the filesystem
needs to do.
- Document that the iomap punch callback assumes that the filesystem must skip
all extent types except for delalloc extents.
- Document the lock order and limits on what the punch callback can actually do.
- cleaned up xfs_iomap_valid().
Version 2:
- https://lore.kernel.org/linux-xfs/20221115013043.360610-1-david@fromorbit.com/
- export mapping_seek_hole_data()
- fix missing initialisation of the iomap sequence in xfs_fs_map_blocks() in the
pnfs code.
- move ->iomap_valid callback to the struct iomap_page_ops so that it is
returned with the iomap rather than having the iomap_ops plumbed through the
entire stack.
- added a u64 validity_cookie to the struct iomap for carrying iomap
verification information along with the iomap itself.
- added IOMAP_F_XATTR for XFS to be able to tell the difference between iomaps
that map attribute extents instead of file data extents.
- converted the IOMAP_F_* flags to use the (1U << NN) definition pattern.
- added patch to convert xfs_bmap_punch_delalloc_range() to take a byte range.
Version 1:
- https://lore.kernel.org/linux-xfs/20221101003412.3842572-1-david@fromorbit.com/
- complete rework of iomap stale detection
- complete rework of XFS partial delalloc write error handling.
Original RFC:
- https://lore.kernel.org/linux-xfs/20220921082959.1411675-1-david@fromorbit.com/
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 1/9] xfs: write page faults in iomap are not buffered writes
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-23 5:58 ` [PATCH 2/9] xfs: punching delalloc extents on write failure is racy Dave Chinner
` (9 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
When we reserve a delalloc region in xfs_buffered_write_iomap_begin,
we mark the iomap as IOMAP_F_NEW so that the the write context
understands that it allocated the delalloc region.
If we then fail that buffered write, xfs_buffered_write_iomap_end()
checks for the IOMAP_F_NEW flag and if it is set, it punches out
the unused delalloc region that was allocated for the write.
The assumption this code makes is that all buffered write operations
that can allocate space are run under an exclusive lock (i_rwsem).
This is an invalid assumption: page faults in mmap()d regions call
through this same function pair to map the file range being faulted
and this runs only holding the inode->i_mapping->invalidate_lock in
shared mode.
IOWs, we can have races between page faults and write() calls that
fail the nested page cache write operation that result in data loss.
That is, the failing iomap_end call will punch out the data that
the other racing iomap iteration brought into the page cache. This
can be reproduced with generic/34[46] if we arbitrarily fail page
cache copy-in operations from write() syscalls.
Code analysis tells us that the iomap_page_mkwrite() function holds
the already instantiated and uptodate folio locked across the iomap
mapping iterations. Hence the folio cannot be removed from memory
whilst we are mapping the range it covers, and as such we do not
care if the mapping changes state underneath the iomap iteration
loop:
1. if the folio is not already dirty, there is no writeback races
possible.
2. if we allocated the mapping (delalloc or unwritten), the folio
cannot already be dirty. See #1.
3. If the folio is already dirty, it must be up to date. As we hold
it locked, it cannot be reclaimed from memory. Hence we always
have valid data in the page cache while iterating the mapping.
4. Valid data in the page cache can exist when the underlying
mapping is DELALLOC, UNWRITTEN or WRITTEN. Having the mapping
change from DELALLOC->UNWRITTEN or UNWRITTEN->WRITTEN does not
change the data in the page - it only affects actions if we are
initialising a new page. Hence #3 applies and we don't care
about these extent map transitions racing with
iomap_page_mkwrite().
5. iomap_page_mkwrite() checks for page invalidation races
(truncate, hole punch, etc) after it locks the folio. We also
hold the mapping->invalidation_lock here, and hence the mapping
cannot change due to extent removal operations while we are
iterating the folio.
As such, filesystems that don't use bufferheads will never fail
the iomap_folio_mkwrite_iter() operation on the current mapping,
regardless of whether the iomap should be considered stale.
Further, the range we are asked to iterate is limited to the range
inside EOF that the folio spans. Hence, for XFS, we will only map
the exact range we are asked for, and we will only do speculative
preallocation with delalloc if we are mapping a hole at the EOF
page. The iterator will consume the entire range of the folio that
is within EOF, and anything beyond the EOF block cannot be accessed.
We never need to truncate this post-EOF speculative prealloc away in
the context of the iomap_page_mkwrite() iterator because if it
remains unused we'll remove it when the last reference to the inode
goes away.
Hence we don't actually need an .iomap_end() cleanup/error handling
path at all for iomap_page_mkwrite() for XFS. This means we can
separate the page fault processing from the complexity of the
.iomap_end() processing in the buffered write path. This also means
that the buffered write path will also be able to take the
mapping->invalidate_lock as necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/xfs_file.c | 2 +-
fs/xfs/xfs_iomap.c | 9 +++++++++
fs/xfs/xfs_iomap.h | 1 +
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index e462d39c840e..595a5bcf46b9 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -1325,7 +1325,7 @@ __xfs_filemap_fault(
if (write_fault) {
xfs_ilock(XFS_I(inode), XFS_MMAPLOCK_SHARED);
ret = iomap_page_mkwrite(vmf,
- &xfs_buffered_write_iomap_ops);
+ &xfs_page_mkwrite_iomap_ops);
xfs_iunlock(XFS_I(inode), XFS_MMAPLOCK_SHARED);
} else {
ret = filemap_fault(vmf);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 07da03976ec1..5cea069a38b4 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -1187,6 +1187,15 @@ const struct iomap_ops xfs_buffered_write_iomap_ops = {
.iomap_end = xfs_buffered_write_iomap_end,
};
+/*
+ * iomap_page_mkwrite() will never fail in a way that requires delalloc extents
+ * that it allocated to be revoked. Hence we do not need an .iomap_end method
+ * for this operation.
+ */
+const struct iomap_ops xfs_page_mkwrite_iomap_ops = {
+ .iomap_begin = xfs_buffered_write_iomap_begin,
+};
+
static int
xfs_read_iomap_begin(
struct inode *inode,
diff --git a/fs/xfs/xfs_iomap.h b/fs/xfs/xfs_iomap.h
index c782e8c0479c..0f62ab633040 100644
--- a/fs/xfs/xfs_iomap.h
+++ b/fs/xfs/xfs_iomap.h
@@ -47,6 +47,7 @@ xfs_aligned_fsb_count(
}
extern const struct iomap_ops xfs_buffered_write_iomap_ops;
+extern const struct iomap_ops xfs_page_mkwrite_iomap_ops;
extern const struct iomap_ops xfs_direct_write_iomap_ops;
extern const struct iomap_ops xfs_read_iomap_ops;
extern const struct iomap_ops xfs_seek_iomap_ops;
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 2/9] xfs: punching delalloc extents on write failure is racy
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
2022-11-23 5:58 ` [PATCH 1/9] xfs: write page faults in iomap are not buffered writes Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-23 5:58 ` [PATCH 3/9] xfs: use byte ranges for write cleanup ranges Dave Chinner
` (8 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
xfs_buffered_write_iomap_end() has a comment about the safety of
punching delalloc extents based holding the IOLOCK_EXCL. This
comment is wrong, and punching delalloc extents is not race free.
When we punch out a delalloc extent after a write failure in
xfs_buffered_write_iomap_end(), we punch out the page cache with
truncate_pagecache_range() before we punch out the delalloc extents.
At this point, we only hold the IOLOCK_EXCL, so there is nothing
stopping mmap() write faults racing with this cleanup operation,
reinstantiating a folio over the range we are about to punch and
hence requiring the delalloc extent to be kept.
If this race condition is hit, we can end up with a dirty page in
the page cache that has no delalloc extent or space reservation
backing it. This leads to bad things happening at writeback time.
To avoid this race condition, we need the page cache truncation to
be atomic w.r.t. the extent manipulation. We can do this by holding
the mapping->invalidate_lock exclusively across this operation -
this will prevent new pages from being inserted into the page cache
whilst we are removing the pages and the backing extent and space
reservation.
Taking the mapping->invalidate_lock exclusively in the buffered
write IO path is safe - it naturally nests inside the IOLOCK (see
truncate and fallocate paths). iomap_zero_range() can be called from
under the mapping->invalidate_lock (from the truncate path via
either xfs_zero_eof() or xfs_truncate_page(), but iomap_zero_iter()
will not instantiate new delalloc pages (because it skips holes) and
hence will not ever need to punch out delalloc extents on failure.
Fix the locking issue, and clean up the code logic a little to avoid
unnecessary work if we didn't allocate the delalloc extent or wrote
the entire region we allocated.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/xfs_iomap.c | 41 +++++++++++++++++++++++------------------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 5cea069a38b4..a2e45ea1b0cb 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -1147,6 +1147,10 @@ xfs_buffered_write_iomap_end(
written = 0;
}
+ /* If we didn't reserve the blocks, we're not allowed to punch them. */
+ if (!(iomap->flags & IOMAP_F_NEW))
+ return 0;
+
/*
* start_fsb refers to the first unused block after a short write. If
* nothing was written, round offset down to point at the first block in
@@ -1158,27 +1162,28 @@ xfs_buffered_write_iomap_end(
start_fsb = XFS_B_TO_FSB(mp, offset + written);
end_fsb = XFS_B_TO_FSB(mp, offset + length);
+ /* Nothing to do if we've written the entire delalloc extent */
+ if (start_fsb >= end_fsb)
+ return 0;
+
/*
- * Trim delalloc blocks if they were allocated by this write and we
- * didn't manage to write the whole range.
- *
- * We don't need to care about racing delalloc as we hold i_mutex
- * across the reserve/allocate/unreserve calls. If there are delalloc
- * blocks in the range, they are ours.
+ * Lock the mapping to avoid races with page faults re-instantiating
+ * folios and dirtying them via ->page_mkwrite between the page cache
+ * truncation and the delalloc extent removal. Failing to do this can
+ * leave dirty pages with no space reservation in the cache.
*/
- if ((iomap->flags & IOMAP_F_NEW) && start_fsb < end_fsb) {
- truncate_pagecache_range(VFS_I(ip), XFS_FSB_TO_B(mp, start_fsb),
- XFS_FSB_TO_B(mp, end_fsb) - 1);
-
- error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
- end_fsb - start_fsb);
- if (error && !xfs_is_shutdown(mp)) {
- xfs_alert(mp, "%s: unable to clean up ino %lld",
- __func__, ip->i_ino);
- return error;
- }
+ filemap_invalidate_lock(inode->i_mapping);
+ truncate_pagecache_range(VFS_I(ip), XFS_FSB_TO_B(mp, start_fsb),
+ XFS_FSB_TO_B(mp, end_fsb) - 1);
+
+ error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
+ end_fsb - start_fsb);
+ filemap_invalidate_unlock(inode->i_mapping);
+ if (error && !xfs_is_shutdown(mp)) {
+ xfs_alert(mp, "%s: unable to clean up ino %lld",
+ __func__, ip->i_ino);
+ return error;
}
-
return 0;
}
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 3/9] xfs: use byte ranges for write cleanup ranges
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
2022-11-23 5:58 ` [PATCH 1/9] xfs: write page faults in iomap are not buffered writes Dave Chinner
2022-11-23 5:58 ` [PATCH 2/9] xfs: punching delalloc extents on write failure is racy Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-23 5:58 ` [PATCH 4/9] xfs,iomap: move delalloc punching to iomap Dave Chinner
` (7 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
xfs_buffered_write_iomap_end() currently converts the byte ranges
passed to it to filesystem blocks to pass them to the bmap code to
punch out delalloc blocks, but then has to convert filesytem
blocks back to byte ranges for page cache truncate.
We're about to make the page cache truncate go away and replace it
with a page cache walk, so having to convert everything to/from/to
filesystem blocks is messy and error-prone. It is much easier to
pass around byte ranges and convert to page indexes and/or
filesystem blocks only where those units are needed.
In preparation for the page cache walk being added, add a helper
that converts byte ranges to filesystem blocks and calls
xfs_bmap_punch_delalloc_range() and convert
xfs_buffered_write_iomap_end() to calculate limits in byte ranges.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/xfs_iomap.c | 40 +++++++++++++++++++++++++---------------
1 file changed, 25 insertions(+), 15 deletions(-)
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index a2e45ea1b0cb..7bb55dbc19d3 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -1120,6 +1120,20 @@ xfs_buffered_write_iomap_begin(
return error;
}
+static int
+xfs_buffered_write_delalloc_punch(
+ struct inode *inode,
+ loff_t start_byte,
+ loff_t end_byte)
+{
+ struct xfs_mount *mp = XFS_M(inode->i_sb);
+ xfs_fileoff_t start_fsb = XFS_B_TO_FSBT(mp, start_byte);
+ xfs_fileoff_t end_fsb = XFS_B_TO_FSB(mp, end_byte);
+
+ return xfs_bmap_punch_delalloc_range(XFS_I(inode), start_fsb,
+ end_fsb - start_fsb);
+}
+
static int
xfs_buffered_write_iomap_end(
struct inode *inode,
@@ -1129,10 +1143,9 @@ xfs_buffered_write_iomap_end(
unsigned flags,
struct iomap *iomap)
{
- struct xfs_inode *ip = XFS_I(inode);
- struct xfs_mount *mp = ip->i_mount;
- xfs_fileoff_t start_fsb;
- xfs_fileoff_t end_fsb;
+ struct xfs_mount *mp = XFS_M(inode->i_sb);
+ loff_t start_byte;
+ loff_t end_byte;
int error = 0;
if (iomap->type != IOMAP_DELALLOC)
@@ -1157,13 +1170,13 @@ xfs_buffered_write_iomap_end(
* the range.
*/
if (unlikely(!written))
- start_fsb = XFS_B_TO_FSBT(mp, offset);
+ start_byte = round_down(offset, mp->m_sb.sb_blocksize);
else
- start_fsb = XFS_B_TO_FSB(mp, offset + written);
- end_fsb = XFS_B_TO_FSB(mp, offset + length);
+ start_byte = round_up(offset + written, mp->m_sb.sb_blocksize);
+ end_byte = round_up(offset + length, mp->m_sb.sb_blocksize);
/* Nothing to do if we've written the entire delalloc extent */
- if (start_fsb >= end_fsb)
+ if (start_byte >= end_byte)
return 0;
/*
@@ -1173,15 +1186,12 @@ xfs_buffered_write_iomap_end(
* leave dirty pages with no space reservation in the cache.
*/
filemap_invalidate_lock(inode->i_mapping);
- truncate_pagecache_range(VFS_I(ip), XFS_FSB_TO_B(mp, start_fsb),
- XFS_FSB_TO_B(mp, end_fsb) - 1);
-
- error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
- end_fsb - start_fsb);
+ truncate_pagecache_range(inode, start_byte, end_byte - 1);
+ error = xfs_buffered_write_delalloc_punch(inode, start_byte, end_byte);
filemap_invalidate_unlock(inode->i_mapping);
if (error && !xfs_is_shutdown(mp)) {
- xfs_alert(mp, "%s: unable to clean up ino %lld",
- __func__, ip->i_ino);
+ xfs_alert(mp, "%s: unable to clean up ino 0x%llx",
+ __func__, XFS_I(inode)->i_ino);
return error;
}
return 0;
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 4/9] xfs,iomap: move delalloc punching to iomap
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
` (2 preceding siblings ...)
2022-11-23 5:58 ` [PATCH 3/9] xfs: use byte ranges for write cleanup ranges Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-23 5:58 ` [PATCH 5/9] iomap: buffered write failure should not truncate the page cache Dave Chinner
` (6 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
Because that's what Christoph wants for this error handling path
only XFS uses.
It requires a new iomap export for handling errors over delalloc
ranges. This is basically the XFS code as is stands, but even though
Christoph wants this as iomap funcitonality, we still have
to call it from the filesystem specific ->iomap_end callback, and
call into the iomap code with yet another filesystem specific
callback to punch the delalloc extent within the defined ranges.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/iomap/buffered-io.c | 60 ++++++++++++++++++++++++++++++++++++++++++
fs/xfs/xfs_iomap.c | 47 ++++++---------------------------
include/linux/iomap.h | 4 +++
3 files changed, 72 insertions(+), 39 deletions(-)
diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index 91ee0b308e13..734b761a1e4a 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -832,6 +832,66 @@ iomap_file_buffered_write(struct kiocb *iocb, struct iov_iter *i,
}
EXPORT_SYMBOL_GPL(iomap_file_buffered_write);
+/*
+ * When a short write occurs, the filesystem may need to remove reserved space
+ * that was allocated in ->iomap_begin from it's ->iomap_end method. For
+ * filesystems that use delayed allocation, we need to punch out delalloc
+ * extents from the range that are not dirty in the page cache. As the write can
+ * race with page faults, there can be dirty pages over the delalloc extent
+ * outside the range of a short write but still within the delalloc extent
+ * allocated for this iomap.
+ *
+ * This function uses [start_byte, end_byte) intervals (i.e. open ended) to
+ * simplify range iterations, but converts them back to {offset,len} tuples for
+ * the punch callback.
+ */
+int iomap_file_buffered_write_punch_delalloc(struct inode *inode,
+ struct iomap *iomap, loff_t pos, loff_t length,
+ ssize_t written,
+ int (*punch)(struct inode *inode, loff_t pos, loff_t length))
+{
+ loff_t start_byte;
+ loff_t end_byte;
+ int blocksize = i_blocksize(inode);
+ int error = 0;
+
+ if (iomap->type != IOMAP_DELALLOC)
+ return 0;
+
+ /* If we didn't reserve the blocks, we're not allowed to punch them. */
+ if (!(iomap->flags & IOMAP_F_NEW))
+ return 0;
+
+ /*
+ * start_byte refers to the first unused block after a short write. If
+ * nothing was written, round offset down to point at the first block in
+ * the range.
+ */
+ if (unlikely(!written))
+ start_byte = round_down(pos, blocksize);
+ else
+ start_byte = round_up(pos + written, blocksize);
+ end_byte = round_up(pos + length, blocksize);
+
+ /* Nothing to do if we've written the entire delalloc extent */
+ if (start_byte >= end_byte)
+ return 0;
+
+ /*
+ * Lock the mapping to avoid races with page faults re-instantiating
+ * folios and dirtying them via ->page_mkwrite between the page cache
+ * truncation and the delalloc extent removal. Failing to do this can
+ * leave dirty pages with no space reservation in the cache.
+ */
+ filemap_invalidate_lock(inode->i_mapping);
+ truncate_pagecache_range(inode, start_byte, end_byte - 1);
+ error = punch(inode, start_byte, end_byte - start_byte);
+ filemap_invalidate_unlock(inode->i_mapping);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(iomap_file_buffered_write_punch_delalloc);
+
static loff_t iomap_unshare_iter(struct iomap_iter *iter)
{
struct iomap *iomap = &iter->iomap;
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 7bb55dbc19d3..ea96e8a34868 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -1123,12 +1123,12 @@ xfs_buffered_write_iomap_begin(
static int
xfs_buffered_write_delalloc_punch(
struct inode *inode,
- loff_t start_byte,
- loff_t end_byte)
+ loff_t offset,
+ loff_t length)
{
struct xfs_mount *mp = XFS_M(inode->i_sb);
- xfs_fileoff_t start_fsb = XFS_B_TO_FSBT(mp, start_byte);
- xfs_fileoff_t end_fsb = XFS_B_TO_FSB(mp, end_byte);
+ xfs_fileoff_t start_fsb = XFS_B_TO_FSBT(mp, offset);
+ xfs_fileoff_t end_fsb = XFS_B_TO_FSB(mp, offset + length);
return xfs_bmap_punch_delalloc_range(XFS_I(inode), start_fsb,
end_fsb - start_fsb);
@@ -1143,13 +1143,9 @@ xfs_buffered_write_iomap_end(
unsigned flags,
struct iomap *iomap)
{
- struct xfs_mount *mp = XFS_M(inode->i_sb);
- loff_t start_byte;
- loff_t end_byte;
- int error = 0;
- if (iomap->type != IOMAP_DELALLOC)
- return 0;
+ struct xfs_mount *mp = XFS_M(inode->i_sb);
+ int error;
/*
* Behave as if the write failed if drop writes is enabled. Set the NEW
@@ -1160,35 +1156,8 @@ xfs_buffered_write_iomap_end(
written = 0;
}
- /* If we didn't reserve the blocks, we're not allowed to punch them. */
- if (!(iomap->flags & IOMAP_F_NEW))
- return 0;
-
- /*
- * start_fsb refers to the first unused block after a short write. If
- * nothing was written, round offset down to point at the first block in
- * the range.
- */
- if (unlikely(!written))
- start_byte = round_down(offset, mp->m_sb.sb_blocksize);
- else
- start_byte = round_up(offset + written, mp->m_sb.sb_blocksize);
- end_byte = round_up(offset + length, mp->m_sb.sb_blocksize);
-
- /* Nothing to do if we've written the entire delalloc extent */
- if (start_byte >= end_byte)
- return 0;
-
- /*
- * Lock the mapping to avoid races with page faults re-instantiating
- * folios and dirtying them via ->page_mkwrite between the page cache
- * truncation and the delalloc extent removal. Failing to do this can
- * leave dirty pages with no space reservation in the cache.
- */
- filemap_invalidate_lock(inode->i_mapping);
- truncate_pagecache_range(inode, start_byte, end_byte - 1);
- error = xfs_buffered_write_delalloc_punch(inode, start_byte, end_byte);
- filemap_invalidate_unlock(inode->i_mapping);
+ error = iomap_file_buffered_write_punch_delalloc(inode, iomap, offset,
+ length, written, &xfs_buffered_write_delalloc_punch);
if (error && !xfs_is_shutdown(mp)) {
xfs_alert(mp, "%s: unable to clean up ino 0x%llx",
__func__, XFS_I(inode)->i_ino);
diff --git a/include/linux/iomap.h b/include/linux/iomap.h
index 238a03087e17..0698c4b8ce0e 100644
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -226,6 +226,10 @@ static inline const struct iomap *iomap_iter_srcmap(const struct iomap_iter *i)
ssize_t iomap_file_buffered_write(struct kiocb *iocb, struct iov_iter *from,
const struct iomap_ops *ops);
+int iomap_file_buffered_write_punch_delalloc(struct inode *inode,
+ struct iomap *iomap, loff_t pos, loff_t length, ssize_t written,
+ int (*punch)(struct inode *inode, loff_t pos, loff_t length));
+
int iomap_read_folio(struct folio *folio, const struct iomap_ops *ops);
void iomap_readahead(struct readahead_control *, const struct iomap_ops *ops);
bool iomap_is_partially_uptodate(struct folio *, size_t from, size_t count);
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 5/9] iomap: buffered write failure should not truncate the page cache
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
` (3 preceding siblings ...)
2022-11-23 5:58 ` [PATCH 4/9] xfs,iomap: move delalloc punching to iomap Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-23 13:24 ` kernel test robot
2022-11-23 5:58 ` [PATCH 6/9] xfs: xfs_bmap_punch_delalloc_range() should take a byte range Dave Chinner
` (5 subsequent siblings)
10 siblings, 1 reply; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
iomap_file_buffered_write_punch_delalloc() currently invalidates the
page cache over the unused range of the delalloc extent that was
allocated. While the write allocated the delalloc extent, it does
not own it exclusively as the write does not hold any locks that
prevent either writeback or mmap page faults from changing the state
of either the page cache or the extent state backing this range.
Whilst xfs_bmap_punch_delalloc_range() already handles races in
extent conversion - it will only punch out delalloc extents and it
ignores any other type of extent - the page cache truncate does not
discriminate between data written by this write or some other task.
As a result, truncating the page cache can result in data corruption
if the write races with mmap modifications to the file over the same
range.
generic/346 exercises this workload, and if we randomly fail writes
(as will happen when iomap gets stale iomap detection later in the
patchset), it will randomly corrupt the file data because it removes
data written by mmap() in the same page as the write() that failed.
Hence we do not want to punch out the page cache over the range of
the extent we failed to write to - what we actually need to do is
detect the ranges that have dirty data in cache over them and *not
punch them out*.
To do this, we have to walk the page cache over the range of the
delalloc extent we want to remove. This is made complex by the fact
we have to handle partially up-to-date folios correctly and this can
happen even when the FSB size == PAGE_SIZE because we now support
multi-page folios in the page cache.
Because we are only interested in discovering the edges of data
ranges in the page cache (i.e. hole-data boundaries) we can make use
of mapping_seek_hole_data() to find those transitions in the page
cache. As we hold the invalidate_lock, we know that the boundaries
are not going to change while we walk the range. This interface is
also byte-based and is sub-page block aware, so we can find the data
ranges in the cache based on byte offsets rather than page, folio or
fs block sized chunks. This greatly simplifies the logic of finding
dirty cached ranges in the page cache.
Once we've identified a range that contains cached data, we can then
iterate the range folio by folio. This allows us to determine if the
data is dirty and hence perform the correct delalloc extent punching
operations. The seek interface we use to iterate data ranges will
give us sub-folio start/end granularity, so we may end up looking up
the same folio multiple times as the seek interface iterates across
each discontiguous data region in the folio.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/iomap/buffered-io.c | 194 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 180 insertions(+), 14 deletions(-)
diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index 734b761a1e4a..29be510c3b15 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -832,6 +832,165 @@ iomap_file_buffered_write(struct kiocb *iocb, struct iov_iter *i,
}
EXPORT_SYMBOL_GPL(iomap_file_buffered_write);
+/*
+ * Scan the data range passed to us for dirty page cache folios. If we find a
+ * dirty folio, punch out the preceeding range and update the offset from which
+ * the next punch will start from.
+ *
+ * We can punch out storage reservations under clean pages because they either
+ * contain data that has been written back - in which case the delalloc punch
+ * over that range is a no-op - or they have been read faults in which case they
+ * contain zeroes and we can remove the delalloc backing range and any new
+ * writes to those pages will do the normal hole filling operation...
+ *
+ * This makes the logic simple: we only need to keep the delalloc extents only
+ * over the dirty ranges of the page cache.
+ *
+ * This function uses [start_byte, end_byte) intervals (i.e. open ended) to
+ * simplify range iterations.
+ */
+static int iomap_write_delalloc_scan(struct inode *inode,
+ loff_t *punch_start_byte, loff_t start_byte, loff_t end_byte,
+ int (*punch)(struct inode *inode, loff_t offset, loff_t length))
+{
+ while (start_byte < end_byte) {
+ struct folio *folio;
+
+ /* grab locked page */
+ folio = filemap_lock_folio(inode->i_mapping,
+ start_byte >> PAGE_SHIFT);
+ if (!folio) {
+ start_byte = ALIGN_DOWN(start_byte, PAGE_SIZE) +
+ PAGE_SIZE;
+ continue;
+ }
+
+ /* if dirty, punch up to offset */
+ if (folio_test_dirty(folio)) {
+ if (start_byte > *punch_start_byte) {
+ int error;
+
+ error = punch(inode, *punch_start_byte,
+ start_byte - *punch_start_byte);
+ if (error) {
+ folio_unlock(folio);
+ folio_put(folio);
+ return error;
+ }
+ }
+
+ /*
+ * Make sure the next punch start is correctly bound to
+ * the end of this data range, not the end of the folio.
+ */
+ *punch_start_byte = min_t(loff_t, end_byte,
+ folio_next_index(folio) << PAGE_SHIFT);
+ }
+
+ /* move offset to start of next folio in range */
+ start_byte = folio_next_index(folio) << PAGE_SHIFT;
+ folio_unlock(folio);
+ folio_put(folio);
+ }
+ return 0;
+}
+
+/*
+ * Punch out all the delalloc blocks in the range given except for those that
+ * have dirty data still pending in the page cache - those are going to be
+ * written and so must still retain the delalloc backing for writeback.
+ *
+ * As we are scanning the page cache for data, we don't need to reimplement the
+ * wheel - mapping_seek_hole_data() does exactly what we need to identify the
+ * start and end of data ranges correctly even for sub-folio block sizes. This
+ * byte range based iteration is especially convenient because it means we
+ * don't have to care about variable size folios, nor where the start or end of
+ * the data range lies within a folio, if they lie within the same folio or even
+ * if there are multiple discontiguous data ranges within the folio.
+ *
+ * It should be noted that mapping_seek_hole_data() is not aware of EOF, and so
+ * can return data ranges that exist in the cache beyond EOF. e.g. a page fault
+ * spanning EOF will initialise the post-EOF data to zeroes and mark it up to
+ * date. A write page fault can then mark it dirty. If we then fail a write()
+ * beyond EOF into that up to date cached range, we allocate a delalloc block
+ * beyond EOF and then have to punch it out. Because the range is up to date,
+ * mapping_seek_hole_data() will return it, and we will skip the punch because
+ * the folio is dirty. THis is incorrect - we always need to punch out delalloc
+ * beyond EOF in this case as writeback will never write back and covert that
+ * delalloc block beyond EOF. Hence we limit the cached data scan range to EOF,
+ * resulting in always punching out the range from the EOF to the end of the
+ * range the iomap spans.
+ *
+ * Intervals are of the form [start_byte, end_byte) (i.e. open ended) because it
+ * matches the intervals returned by mapping_seek_hole_data(). i.e. SEEK_DATA
+ * returns the start of a data range (start_byte), and SEEK_HOLE(start_byte)
+ * returns the end of the data range (data_end). Using closed intervals would
+ * require sprinkling this code with magic "+ 1" and "- 1" arithmetic and expose
+ * the code to subtle off-by-one bugs....
+ */
+static int iomap_write_delalloc_release(struct inode *inode,
+ loff_t start_byte, loff_t end_byte,
+ int (*punch)(struct inode *inode, loff_t pos, loff_t length))
+{
+ loff_t punch_start_byte = start_byte;
+ loff_t scan_end_byte = min(i_size_read(inode), end_byte);
+ int error = 0;
+
+ /*
+ * Lock the mapping to avoid races with page faults re-instantiating
+ * folios and dirtying them via ->page_mkwrite whilst we walk the
+ * cache and perform delalloc extent removal. Failing to do this can
+ * leave dirty pages with no space reservation in the cache.
+ */
+ filemap_invalidate_lock(inode->i_mapping);
+ while (start_byte < scan_end_byte) {
+ loff_t data_end;
+
+ start_byte = mapping_seek_hole_data(inode->i_mapping,
+ start_byte, scan_end_byte, SEEK_DATA);
+ /*
+ * If there is no more data to scan, all that is left is to
+ * punch out the remaining range.
+ */
+ if (start_byte == -ENXIO || start_byte == scan_end_byte)
+ break;
+ if (start_byte < 0) {
+ error = start_byte;
+ goto out_unlock;
+ }
+ WARN_ON_ONCE(start_byte < punch_start_byte);
+ WARN_ON_ONCE(start_byte > scan_end_byte);
+
+ /*
+ * We find the end of this contiguous cached data range by
+ * seeking from start_byte to the beginning of the next hole.
+ */
+ data_end = mapping_seek_hole_data(inode->i_mapping, start_byte,
+ scan_end_byte, SEEK_HOLE);
+ if (data_end < 0) {
+ error = data_end;
+ goto out_unlock;
+ }
+ WARN_ON_ONCE(data_end <= start_byte);
+ WARN_ON_ONCE(data_end > scan_end_byte);
+
+ error = iomap_write_delalloc_scan(inode, &punch_start_byte,
+ start_byte, data_end, punch);
+ if (error)
+ goto out_unlock;
+
+ /* The next data search starts at the end of this one. */
+ start_byte = data_end;
+ }
+
+ if (punch_start_byte < end_byte)
+ error = punch(inode, punch_start_byte,
+ end_byte - punch_start_byte);
+out_unlock:
+ filemap_invalidate_unlock(inode->i_mapping);
+ return error;
+}
+
/*
* When a short write occurs, the filesystem may need to remove reserved space
* that was allocated in ->iomap_begin from it's ->iomap_end method. For
@@ -842,8 +1001,25 @@ EXPORT_SYMBOL_GPL(iomap_file_buffered_write);
* allocated for this iomap.
*
* This function uses [start_byte, end_byte) intervals (i.e. open ended) to
- * simplify range iterations, but converts them back to {offset,len} tuples for
- * the punch callback.
+ * simplify range iterations.
+ *
+ * The punch() callback *must* only punch delalloc extents in the range passed
+ * to it. It must skip over all other types of extents in the range and leave
+ * them completely unchanged. It must do this punch atomically with respect to
+ * other extent modifications.
+ *
+ * The punch() callback may be called with a folio locked to prevent writeback
+ * extent allocation racing at the edge of the range we are currently punching.
+ * The locked folio may or may not cover the range being punched, so it is not
+ * safe for the punch() callback to lock folios itself.
+ *
+ * Lock order is:
+ *
+ * inode->i_rwsem (shared or exclusive)
+ * inode->i_mapping->invalidate_lock (exclusive)
+ * folio_lock()
+ * ->punch
+ * internal filesystem allocation lock
*/
int iomap_file_buffered_write_punch_delalloc(struct inode *inode,
struct iomap *iomap, loff_t pos, loff_t length,
@@ -877,18 +1053,8 @@ int iomap_file_buffered_write_punch_delalloc(struct inode *inode,
if (start_byte >= end_byte)
return 0;
- /*
- * Lock the mapping to avoid races with page faults re-instantiating
- * folios and dirtying them via ->page_mkwrite between the page cache
- * truncation and the delalloc extent removal. Failing to do this can
- * leave dirty pages with no space reservation in the cache.
- */
- filemap_invalidate_lock(inode->i_mapping);
- truncate_pagecache_range(inode, start_byte, end_byte - 1);
- error = punch(inode, start_byte, end_byte - start_byte);
- filemap_invalidate_unlock(inode->i_mapping);
-
- return error;
+ return iomap_write_delalloc_release(inode, start_byte, end_byte,
+ punch);
}
EXPORT_SYMBOL_GPL(iomap_file_buffered_write_punch_delalloc);
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 6/9] xfs: xfs_bmap_punch_delalloc_range() should take a byte range
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
` (4 preceding siblings ...)
2022-11-23 5:58 ` [PATCH 5/9] iomap: buffered write failure should not truncate the page cache Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-23 5:58 ` [PATCH 7/9] iomap: write iomap validity checks Dave Chinner
` (4 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
All the callers of xfs_bmap_punch_delalloc_range() jump through
hoops to convert a byte range to filesystem blocks before calling
xfs_bmap_punch_delalloc_range(). Instead, pass the byte range to
xfs_bmap_punch_delalloc_range() and have it do the conversion to
filesystem blocks internally.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/xfs_aops.c | 16 ++++++----------
fs/xfs/xfs_bmap_util.c | 10 ++++++----
fs/xfs/xfs_bmap_util.h | 2 +-
fs/xfs/xfs_iomap.c | 8 ++------
4 files changed, 15 insertions(+), 21 deletions(-)
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 5d1a995b15f8..6aadc5815068 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -114,9 +114,8 @@ xfs_end_ioend(
if (unlikely(error)) {
if (ioend->io_flags & IOMAP_F_SHARED) {
xfs_reflink_cancel_cow_range(ip, offset, size, true);
- xfs_bmap_punch_delalloc_range(ip,
- XFS_B_TO_FSBT(mp, offset),
- XFS_B_TO_FSB(mp, size));
+ xfs_bmap_punch_delalloc_range(ip, offset,
+ offset + size);
}
goto done;
}
@@ -455,12 +454,8 @@ xfs_discard_folio(
struct folio *folio,
loff_t pos)
{
- struct inode *inode = folio->mapping->host;
- struct xfs_inode *ip = XFS_I(inode);
+ struct xfs_inode *ip = XFS_I(folio->mapping->host);
struct xfs_mount *mp = ip->i_mount;
- size_t offset = offset_in_folio(folio, pos);
- xfs_fileoff_t start_fsb = XFS_B_TO_FSBT(mp, pos);
- xfs_fileoff_t pageoff_fsb = XFS_B_TO_FSBT(mp, offset);
int error;
if (xfs_is_shutdown(mp))
@@ -470,8 +465,9 @@ xfs_discard_folio(
"page discard on page "PTR_FMT", inode 0x%llx, pos %llu.",
folio, ip->i_ino, pos);
- error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
- i_blocks_per_folio(inode, folio) - pageoff_fsb);
+ error = xfs_bmap_punch_delalloc_range(ip, pos,
+ round_up(pos, folio_size(folio)));
+
if (error && !xfs_is_shutdown(mp))
xfs_alert(mp, "page discard unable to remove delalloc mapping.");
}
diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index 04d0c2bff67c..867645b74d88 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -590,11 +590,13 @@ xfs_getbmap(
int
xfs_bmap_punch_delalloc_range(
struct xfs_inode *ip,
- xfs_fileoff_t start_fsb,
- xfs_fileoff_t length)
+ xfs_off_t start_byte,
+ xfs_off_t end_byte)
{
+ struct xfs_mount *mp = ip->i_mount;
struct xfs_ifork *ifp = &ip->i_df;
- xfs_fileoff_t end_fsb = start_fsb + length;
+ xfs_fileoff_t start_fsb = XFS_B_TO_FSBT(mp, start_byte);
+ xfs_fileoff_t end_fsb = XFS_B_TO_FSB(mp, end_byte);
struct xfs_bmbt_irec got, del;
struct xfs_iext_cursor icur;
int error = 0;
@@ -607,7 +609,7 @@ xfs_bmap_punch_delalloc_range(
while (got.br_startoff + got.br_blockcount > start_fsb) {
del = got;
- xfs_trim_extent(&del, start_fsb, length);
+ xfs_trim_extent(&del, start_fsb, end_fsb - start_fsb);
/*
* A delete can push the cursor forward. Step back to the
diff --git a/fs/xfs/xfs_bmap_util.h b/fs/xfs/xfs_bmap_util.h
index 24b37d211f1d..6888078f5c31 100644
--- a/fs/xfs/xfs_bmap_util.h
+++ b/fs/xfs/xfs_bmap_util.h
@@ -31,7 +31,7 @@ xfs_bmap_rtalloc(struct xfs_bmalloca *ap)
#endif /* CONFIG_XFS_RT */
int xfs_bmap_punch_delalloc_range(struct xfs_inode *ip,
- xfs_fileoff_t start_fsb, xfs_fileoff_t length);
+ xfs_off_t start_byte, xfs_off_t end_byte);
struct kgetbmap {
__s64 bmv_offset; /* file offset of segment in blocks */
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index ea96e8a34868..09676ff6940e 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -1126,12 +1126,8 @@ xfs_buffered_write_delalloc_punch(
loff_t offset,
loff_t length)
{
- struct xfs_mount *mp = XFS_M(inode->i_sb);
- xfs_fileoff_t start_fsb = XFS_B_TO_FSBT(mp, offset);
- xfs_fileoff_t end_fsb = XFS_B_TO_FSB(mp, offset + length);
-
- return xfs_bmap_punch_delalloc_range(XFS_I(inode), start_fsb,
- end_fsb - start_fsb);
+ return xfs_bmap_punch_delalloc_range(XFS_I(inode), offset,
+ offset + length);
}
static int
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 7/9] iomap: write iomap validity checks
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
` (5 preceding siblings ...)
2022-11-23 5:58 ` [PATCH 6/9] xfs: xfs_bmap_punch_delalloc_range() should take a byte range Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-23 5:58 ` [PATCH 8/9] xfs: use iomap_valid method to detect stale cached iomaps Dave Chinner
` (3 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
A recent multithreaded write data corruption has been uncovered in
the iomap write code. The core of the problem is partial folio
writes can be flushed to disk while a new racing write can map it
and fill the rest of the page:
writeback new write
allocate blocks
blocks are unwritten
submit IO
.....
map blocks
iomap indicates UNWRITTEN range
loop {
lock folio
copyin data
.....
IO completes
runs unwritten extent conv
blocks are marked written
<iomap now stale>
get next folio
}
Now add memory pressure such that memory reclaim evicts the
partially written folio that has already been written to disk.
When the new write finally gets to the last partial page of the new
write, it does not find it in cache, so it instantiates a new page,
sees the iomap is unwritten, and zeros the part of the page that
it does not have data from. This overwrites the data on disk that
was originally written.
The full description of the corruption mechanism can be found here:
https://lore.kernel.org/linux-xfs/20220817093627.GZ3600936@dread.disaster.area/
To solve this problem, we need to check whether the iomap is still
valid after we lock each folio during the write. We have to do it
after we lock the page so that we don't end up with state changes
occurring while we wait for the folio to be locked.
Hence we need a mechanism to be able to check that the cached iomap
is still valid (similar to what we already do in buffered
writeback), and we need a way for ->begin_write to back out and
tell the high level iomap iterator that we need to remap the
remaining write range.
The iomap needs to grow some storage for the validity cookie that
the filesystem provides to travel with the iomap. XFS, in
particular, also needs to know some more information about what the
iomap maps (attribute extents rather than file data extents) to for
the validity cookie to cover all the types of iomaps we might need
to validate.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/iomap/buffered-io.c | 29 +++++++++++++++++++++++++++-
fs/iomap/iter.c | 19 ++++++++++++++++++-
include/linux/iomap.h | 43 ++++++++++++++++++++++++++++++++++--------
3 files changed, 81 insertions(+), 10 deletions(-)
diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index 29be510c3b15..05b9539ee25e 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -584,7 +584,7 @@ static int iomap_write_begin_inline(const struct iomap_iter *iter,
return iomap_read_inline_data(iter, folio);
}
-static int iomap_write_begin(const struct iomap_iter *iter, loff_t pos,
+static int iomap_write_begin(struct iomap_iter *iter, loff_t pos,
size_t len, struct folio **foliop)
{
const struct iomap_page_ops *page_ops = iter->iomap.page_ops;
@@ -618,6 +618,27 @@ static int iomap_write_begin(const struct iomap_iter *iter, loff_t pos,
status = (iter->flags & IOMAP_NOWAIT) ? -EAGAIN : -ENOMEM;
goto out_no_page;
}
+
+ /*
+ * Now we have a locked folio, before we do anything with it we need to
+ * check that the iomap we have cached is not stale. The inode extent
+ * mapping can change due to concurrent IO in flight (e.g.
+ * IOMAP_UNWRITTEN state can change and memory reclaim could have
+ * reclaimed a previously partially written page at this index after IO
+ * completion before this write reaches this file offset) and hence we
+ * could do the wrong thing here (zero a page range incorrectly or fail
+ * to zero) and corrupt data.
+ */
+ if (page_ops && page_ops->iomap_valid) {
+ bool iomap_valid = page_ops->iomap_valid(iter->inode,
+ &iter->iomap);
+ if (!iomap_valid) {
+ iter->iomap.flags |= IOMAP_F_STALE;
+ status = 0;
+ goto out_unlock;
+ }
+ }
+
if (pos + len > folio_pos(folio) + folio_size(folio))
len = folio_pos(folio) + folio_size(folio) - pos;
@@ -773,6 +794,8 @@ static loff_t iomap_write_iter(struct iomap_iter *iter, struct iov_iter *i)
status = iomap_write_begin(iter, pos, bytes, &folio);
if (unlikely(status))
break;
+ if (iter->iomap.flags & IOMAP_F_STALE)
+ break;
page = folio_file_page(folio, pos >> PAGE_SHIFT);
if (mapping_writably_mapped(mapping))
@@ -1082,6 +1105,8 @@ static loff_t iomap_unshare_iter(struct iomap_iter *iter)
status = iomap_write_begin(iter, pos, bytes, &folio);
if (unlikely(status))
return status;
+ if (iter->iomap.flags & IOMAP_F_STALE)
+ break;
status = iomap_write_end(iter, pos, bytes, bytes, folio);
if (WARN_ON_ONCE(status == 0))
@@ -1137,6 +1162,8 @@ static loff_t iomap_zero_iter(struct iomap_iter *iter, bool *did_zero)
status = iomap_write_begin(iter, pos, bytes, &folio);
if (status)
return status;
+ if (iter->iomap.flags & IOMAP_F_STALE)
+ break;
offset = offset_in_folio(folio, pos);
if (bytes > folio_size(folio) - offset)
diff --git a/fs/iomap/iter.c b/fs/iomap/iter.c
index a1c7592d2ade..79a0614eaab7 100644
--- a/fs/iomap/iter.c
+++ b/fs/iomap/iter.c
@@ -7,12 +7,28 @@
#include <linux/iomap.h>
#include "trace.h"
+/*
+ * Advance to the next range we need to map.
+ *
+ * If the iomap is marked IOMAP_F_STALE, it means the existing map was not fully
+ * processed - it was aborted because the extent the iomap spanned may have been
+ * changed during the operation. In this case, the iteration behaviour is to
+ * remap the unprocessed range of the iter, and that means we may need to remap
+ * even when we've made no progress (i.e. iter->processed = 0). Hence the
+ * "finished iterating" case needs to distinguish between
+ * (processed = 0) meaning we are done and (processed = 0 && stale) meaning we
+ * need to remap the entire remaining range.
+ */
static inline int iomap_iter_advance(struct iomap_iter *iter)
{
+ bool stale = iter->iomap.flags & IOMAP_F_STALE;
+
/* handle the previous iteration (if any) */
if (iter->iomap.length) {
- if (iter->processed <= 0)
+ if (iter->processed < 0)
return iter->processed;
+ if (!iter->processed && !stale)
+ return 0;
if (WARN_ON_ONCE(iter->processed > iomap_length(iter)))
return -EIO;
iter->pos += iter->processed;
@@ -33,6 +49,7 @@ static inline void iomap_iter_done(struct iomap_iter *iter)
WARN_ON_ONCE(iter->iomap.offset > iter->pos);
WARN_ON_ONCE(iter->iomap.length == 0);
WARN_ON_ONCE(iter->iomap.offset + iter->iomap.length <= iter->pos);
+ WARN_ON_ONCE(iter->iomap.flags & IOMAP_F_STALE);
trace_iomap_iter_dstmap(iter->inode, &iter->iomap);
if (iter->srcmap.type != IOMAP_HOLE)
diff --git a/include/linux/iomap.h b/include/linux/iomap.h
index 0698c4b8ce0e..0983dfc9a203 100644
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -49,26 +49,35 @@ struct vm_fault;
*
* IOMAP_F_BUFFER_HEAD indicates that the file system requires the use of
* buffer heads for this mapping.
+ *
+ * IOMAP_F_XATTR indicates that the iomap is for an extended attribute extent
+ * rather than a file data extent.
*/
-#define IOMAP_F_NEW 0x01
-#define IOMAP_F_DIRTY 0x02
-#define IOMAP_F_SHARED 0x04
-#define IOMAP_F_MERGED 0x08
-#define IOMAP_F_BUFFER_HEAD 0x10
-#define IOMAP_F_ZONE_APPEND 0x20
+#define IOMAP_F_NEW (1U << 0)
+#define IOMAP_F_DIRTY (1U << 1)
+#define IOMAP_F_SHARED (1U << 2)
+#define IOMAP_F_MERGED (1U << 3)
+#define IOMAP_F_BUFFER_HEAD (1U << 4)
+#define IOMAP_F_ZONE_APPEND (1U << 5)
+#define IOMAP_F_XATTR (1U << 6)
/*
* Flags set by the core iomap code during operations:
*
* IOMAP_F_SIZE_CHANGED indicates to the iomap_end method that the file size
* has changed as the result of this write operation.
+ *
+ * IOMAP_F_STALE indicates that the iomap is not valid any longer and the file
+ * range it covers needs to be remapped by the high level before the operation
+ * can proceed.
*/
-#define IOMAP_F_SIZE_CHANGED 0x100
+#define IOMAP_F_SIZE_CHANGED (1U << 8)
+#define IOMAP_F_STALE (1U << 9)
/*
* Flags from 0x1000 up are for file system specific usage:
*/
-#define IOMAP_F_PRIVATE 0x1000
+#define IOMAP_F_PRIVATE (1U << 12)
/*
@@ -89,6 +98,7 @@ struct iomap {
void *inline_data;
void *private; /* filesystem private */
const struct iomap_page_ops *page_ops;
+ u64 validity_cookie; /* used with .iomap_valid() */
};
static inline sector_t iomap_sector(const struct iomap *iomap, loff_t pos)
@@ -128,6 +138,23 @@ struct iomap_page_ops {
int (*page_prepare)(struct inode *inode, loff_t pos, unsigned len);
void (*page_done)(struct inode *inode, loff_t pos, unsigned copied,
struct page *page);
+
+ /*
+ * Check that the cached iomap still maps correctly to the filesystem's
+ * internal extent map. FS internal extent maps can change while iomap
+ * is iterating a cached iomap, so this hook allows iomap to detect that
+ * the iomap needs to be refreshed during a long running write
+ * operation.
+ *
+ * The filesystem can store internal state (e.g. a sequence number) in
+ * iomap->validity_cookie when the iomap is first mapped to be able to
+ * detect changes between mapping time and whenever .iomap_valid() is
+ * called.
+ *
+ * This is called with the folio over the specified file position held
+ * locked by the iomap code.
+ */
+ bool (*iomap_valid)(struct inode *inode, const struct iomap *iomap);
};
/*
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 8/9] xfs: use iomap_valid method to detect stale cached iomaps
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
` (6 preceding siblings ...)
2022-11-23 5:58 ` [PATCH 7/9] iomap: write iomap validity checks Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-23 5:58 ` [PATCH 9/9] xfs: drop write error injection is unfixable, remove it Dave Chinner
` (2 subsequent siblings)
10 siblings, 0 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
Now that iomap supports a mechanism to validate cached iomaps for
buffered write operations, hook it up to the XFS buffered write ops
so that we can avoid data corruptions that result from stale cached
iomaps. See:
https://lore.kernel.org/linux-xfs/20220817093627.GZ3600936@dread.disaster.area/
or the ->iomap_valid() introduction commit for exact details of the
corruption vector.
The validity cookie we store in the iomap is based on the type of
iomap we return. It is expected that the iomap->flags we set in
xfs_bmbt_to_iomap() is not perturbed by the iomap core and are
returned to us in the iomap passed via the .iomap_valid() callback.
This ensures that the validity cookie is always checking the correct
inode fork sequence numbers to detect potential changes that affect
the extent cached by the iomap.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/libxfs/xfs_bmap.c | 6 ++-
fs/xfs/xfs_aops.c | 2 +-
fs/xfs/xfs_iomap.c | 95 +++++++++++++++++++++++++++++++---------
fs/xfs/xfs_iomap.h | 5 ++-
fs/xfs/xfs_pnfs.c | 6 ++-
5 files changed, 87 insertions(+), 27 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
index 49d0d4ea63fc..56b9b7db38bb 100644
--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -4551,7 +4551,8 @@ xfs_bmapi_convert_delalloc(
* the extent. Just return the real extent at this offset.
*/
if (!isnullstartblock(bma.got.br_startblock)) {
- xfs_bmbt_to_iomap(ip, iomap, &bma.got, 0, flags);
+ xfs_bmbt_to_iomap(ip, iomap, &bma.got, 0, flags,
+ xfs_iomap_inode_sequence(ip, flags));
*seq = READ_ONCE(ifp->if_seq);
goto out_trans_cancel;
}
@@ -4599,7 +4600,8 @@ xfs_bmapi_convert_delalloc(
XFS_STATS_INC(mp, xs_xstrat_quick);
ASSERT(!isnullstartblock(bma.got.br_startblock));
- xfs_bmbt_to_iomap(ip, iomap, &bma.got, 0, flags);
+ xfs_bmbt_to_iomap(ip, iomap, &bma.got, 0, flags,
+ xfs_iomap_inode_sequence(ip, flags));
*seq = READ_ONCE(ifp->if_seq);
if (whichfork == XFS_COW_FORK)
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 6aadc5815068..a22d90af40c8 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -372,7 +372,7 @@ xfs_map_blocks(
isnullstartblock(imap.br_startblock))
goto allocate_blocks;
- xfs_bmbt_to_iomap(ip, &wpc->iomap, &imap, 0, 0);
+ xfs_bmbt_to_iomap(ip, &wpc->iomap, &imap, 0, 0, XFS_WPC(wpc)->data_seq);
trace_xfs_map_blocks_found(ip, offset, count, whichfork, &imap);
return 0;
allocate_blocks:
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 09676ff6940e..26ca3cc1a048 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -48,13 +48,45 @@ xfs_alert_fsblock_zero(
return -EFSCORRUPTED;
}
+u64
+xfs_iomap_inode_sequence(
+ struct xfs_inode *ip,
+ u16 iomap_flags)
+{
+ u64 cookie = 0;
+
+ if (iomap_flags & IOMAP_F_XATTR)
+ return READ_ONCE(ip->i_af.if_seq);
+ if ((iomap_flags & IOMAP_F_SHARED) && ip->i_cowfp)
+ cookie = (u64)READ_ONCE(ip->i_cowfp->if_seq) << 32;
+ return cookie | READ_ONCE(ip->i_df.if_seq);
+}
+
+/*
+ * Check that the iomap passed to us is still valid for the given offset and
+ * length.
+ */
+static bool
+xfs_iomap_valid(
+ struct inode *inode,
+ const struct iomap *iomap)
+{
+ return iomap->validity_cookie ==
+ xfs_iomap_inode_sequence(XFS_I(inode), iomap->flags);
+}
+
+const struct iomap_page_ops xfs_iomap_page_ops = {
+ .iomap_valid = xfs_iomap_valid,
+};
+
int
xfs_bmbt_to_iomap(
struct xfs_inode *ip,
struct iomap *iomap,
struct xfs_bmbt_irec *imap,
unsigned int mapping_flags,
- u16 iomap_flags)
+ u16 iomap_flags,
+ u64 sequence_cookie)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_buftarg *target = xfs_inode_buftarg(ip);
@@ -91,6 +123,9 @@ xfs_bmbt_to_iomap(
if (xfs_ipincount(ip) &&
(ip->i_itemp->ili_fsync_fields & ~XFS_ILOG_TIMESTAMP))
iomap->flags |= IOMAP_F_DIRTY;
+
+ iomap->validity_cookie = sequence_cookie;
+ iomap->page_ops = &xfs_iomap_page_ops;
return 0;
}
@@ -195,7 +230,8 @@ xfs_iomap_write_direct(
xfs_fileoff_t offset_fsb,
xfs_fileoff_t count_fsb,
unsigned int flags,
- struct xfs_bmbt_irec *imap)
+ struct xfs_bmbt_irec *imap,
+ u64 *seq)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
@@ -285,6 +321,7 @@ xfs_iomap_write_direct(
error = xfs_alert_fsblock_zero(ip, imap);
out_unlock:
+ *seq = xfs_iomap_inode_sequence(ip, 0);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
@@ -743,6 +780,7 @@ xfs_direct_write_iomap_begin(
bool shared = false;
u16 iomap_flags = 0;
unsigned int lockmode = XFS_ILOCK_SHARED;
+ u64 seq;
ASSERT(flags & (IOMAP_WRITE | IOMAP_ZERO));
@@ -811,9 +849,10 @@ xfs_direct_write_iomap_begin(
goto out_unlock;
}
+ seq = xfs_iomap_inode_sequence(ip, iomap_flags);
xfs_iunlock(ip, lockmode);
trace_xfs_iomap_found(ip, offset, length, XFS_DATA_FORK, &imap);
- return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, iomap_flags);
+ return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, iomap_flags, seq);
allocate_blocks:
error = -EAGAIN;
@@ -839,24 +878,26 @@ xfs_direct_write_iomap_begin(
xfs_iunlock(ip, lockmode);
error = xfs_iomap_write_direct(ip, offset_fsb, end_fsb - offset_fsb,
- flags, &imap);
+ flags, &imap, &seq);
if (error)
return error;
trace_xfs_iomap_alloc(ip, offset, length, XFS_DATA_FORK, &imap);
return xfs_bmbt_to_iomap(ip, iomap, &imap, flags,
- iomap_flags | IOMAP_F_NEW);
+ iomap_flags | IOMAP_F_NEW, seq);
out_found_cow:
- xfs_iunlock(ip, lockmode);
length = XFS_FSB_TO_B(mp, cmap.br_startoff + cmap.br_blockcount);
trace_xfs_iomap_found(ip, offset, length - offset, XFS_COW_FORK, &cmap);
if (imap.br_startblock != HOLESTARTBLOCK) {
- error = xfs_bmbt_to_iomap(ip, srcmap, &imap, flags, 0);
+ seq = xfs_iomap_inode_sequence(ip, 0);
+ error = xfs_bmbt_to_iomap(ip, srcmap, &imap, flags, 0, seq);
if (error)
- return error;
+ goto out_unlock;
}
- return xfs_bmbt_to_iomap(ip, iomap, &cmap, flags, IOMAP_F_SHARED);
+ seq = xfs_iomap_inode_sequence(ip, IOMAP_F_SHARED);
+ xfs_iunlock(ip, lockmode);
+ return xfs_bmbt_to_iomap(ip, iomap, &cmap, flags, IOMAP_F_SHARED, seq);
out_unlock:
if (lockmode)
@@ -915,6 +956,7 @@ xfs_buffered_write_iomap_begin(
int allocfork = XFS_DATA_FORK;
int error = 0;
unsigned int lockmode = XFS_ILOCK_EXCL;
+ u64 seq;
if (xfs_is_shutdown(mp))
return -EIO;
@@ -1094,26 +1136,31 @@ xfs_buffered_write_iomap_begin(
* Flag newly allocated delalloc blocks with IOMAP_F_NEW so we punch
* them out if the write happens to fail.
*/
+ seq = xfs_iomap_inode_sequence(ip, IOMAP_F_NEW);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
trace_xfs_iomap_alloc(ip, offset, count, allocfork, &imap);
- return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, IOMAP_F_NEW);
+ return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, IOMAP_F_NEW, seq);
found_imap:
+ seq = xfs_iomap_inode_sequence(ip, 0);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
- return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, 0);
+ return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, 0, seq);
found_cow:
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ seq = xfs_iomap_inode_sequence(ip, 0);
if (imap.br_startoff <= offset_fsb) {
- error = xfs_bmbt_to_iomap(ip, srcmap, &imap, flags, 0);
+ error = xfs_bmbt_to_iomap(ip, srcmap, &imap, flags, 0, seq);
if (error)
- return error;
+ goto out_unlock;
+ seq = xfs_iomap_inode_sequence(ip, IOMAP_F_SHARED);
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
return xfs_bmbt_to_iomap(ip, iomap, &cmap, flags,
- IOMAP_F_SHARED);
+ IOMAP_F_SHARED, seq);
}
xfs_trim_extent(&cmap, offset_fsb, imap.br_startoff - offset_fsb);
- return xfs_bmbt_to_iomap(ip, iomap, &cmap, flags, 0);
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ return xfs_bmbt_to_iomap(ip, iomap, &cmap, flags, 0, seq);
out_unlock:
xfs_iunlock(ip, XFS_ILOCK_EXCL);
@@ -1193,6 +1240,7 @@ xfs_read_iomap_begin(
int nimaps = 1, error = 0;
bool shared = false;
unsigned int lockmode = XFS_ILOCK_SHARED;
+ u64 seq;
ASSERT(!(flags & (IOMAP_WRITE | IOMAP_ZERO)));
@@ -1206,13 +1254,14 @@ xfs_read_iomap_begin(
&nimaps, 0);
if (!error && (flags & IOMAP_REPORT))
error = xfs_reflink_trim_around_shared(ip, &imap, &shared);
+ seq = xfs_iomap_inode_sequence(ip, shared ? IOMAP_F_SHARED : 0);
xfs_iunlock(ip, lockmode);
if (error)
return error;
trace_xfs_iomap_found(ip, offset, length, XFS_DATA_FORK, &imap);
return xfs_bmbt_to_iomap(ip, iomap, &imap, flags,
- shared ? IOMAP_F_SHARED : 0);
+ shared ? IOMAP_F_SHARED : 0, seq);
}
const struct iomap_ops xfs_read_iomap_ops = {
@@ -1237,6 +1286,7 @@ xfs_seek_iomap_begin(
struct xfs_bmbt_irec imap, cmap;
int error = 0;
unsigned lockmode;
+ u64 seq;
if (xfs_is_shutdown(mp))
return -EIO;
@@ -1271,8 +1321,9 @@ xfs_seek_iomap_begin(
if (data_fsb < cow_fsb + cmap.br_blockcount)
end_fsb = min(end_fsb, data_fsb);
xfs_trim_extent(&cmap, offset_fsb, end_fsb);
+ seq = xfs_iomap_inode_sequence(ip, IOMAP_F_SHARED);
error = xfs_bmbt_to_iomap(ip, iomap, &cmap, flags,
- IOMAP_F_SHARED);
+ IOMAP_F_SHARED, seq);
/*
* This is a COW extent, so we must probe the page cache
* because there could be dirty page cache being backed
@@ -1293,8 +1344,9 @@ xfs_seek_iomap_begin(
imap.br_startblock = HOLESTARTBLOCK;
imap.br_state = XFS_EXT_NORM;
done:
+ seq = xfs_iomap_inode_sequence(ip, 0);
xfs_trim_extent(&imap, offset_fsb, end_fsb);
- error = xfs_bmbt_to_iomap(ip, iomap, &imap, flags, 0);
+ error = xfs_bmbt_to_iomap(ip, iomap, &imap, flags, 0, seq);
out_unlock:
xfs_iunlock(ip, lockmode);
return error;
@@ -1320,6 +1372,7 @@ xfs_xattr_iomap_begin(
struct xfs_bmbt_irec imap;
int nimaps = 1, error = 0;
unsigned lockmode;
+ int seq;
if (xfs_is_shutdown(mp))
return -EIO;
@@ -1336,12 +1389,14 @@ xfs_xattr_iomap_begin(
error = xfs_bmapi_read(ip, offset_fsb, end_fsb - offset_fsb, &imap,
&nimaps, XFS_BMAPI_ATTRFORK);
out_unlock:
+
+ seq = xfs_iomap_inode_sequence(ip, IOMAP_F_XATTR);
xfs_iunlock(ip, lockmode);
if (error)
return error;
ASSERT(nimaps);
- return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, 0);
+ return xfs_bmbt_to_iomap(ip, iomap, &imap, flags, IOMAP_F_XATTR, seq);
}
const struct iomap_ops xfs_xattr_iomap_ops = {
diff --git a/fs/xfs/xfs_iomap.h b/fs/xfs/xfs_iomap.h
index 0f62ab633040..4da13440bae9 100644
--- a/fs/xfs/xfs_iomap.h
+++ b/fs/xfs/xfs_iomap.h
@@ -13,14 +13,15 @@ struct xfs_bmbt_irec;
int xfs_iomap_write_direct(struct xfs_inode *ip, xfs_fileoff_t offset_fsb,
xfs_fileoff_t count_fsb, unsigned int flags,
- struct xfs_bmbt_irec *imap);
+ struct xfs_bmbt_irec *imap, u64 *sequence);
int xfs_iomap_write_unwritten(struct xfs_inode *, xfs_off_t, xfs_off_t, bool);
xfs_fileoff_t xfs_iomap_eof_align_last_fsb(struct xfs_inode *ip,
xfs_fileoff_t end_fsb);
+u64 xfs_iomap_inode_sequence(struct xfs_inode *ip, u16 iomap_flags);
int xfs_bmbt_to_iomap(struct xfs_inode *ip, struct iomap *iomap,
struct xfs_bmbt_irec *imap, unsigned int mapping_flags,
- u16 iomap_flags);
+ u16 iomap_flags, u64 sequence_cookie);
int xfs_zero_range(struct xfs_inode *ip, loff_t pos, loff_t len,
bool *did_zero);
diff --git a/fs/xfs/xfs_pnfs.c b/fs/xfs/xfs_pnfs.c
index 37a24f0f7cd4..38d23f0e703a 100644
--- a/fs/xfs/xfs_pnfs.c
+++ b/fs/xfs/xfs_pnfs.c
@@ -125,6 +125,7 @@ xfs_fs_map_blocks(
int nimaps = 1;
uint lock_flags;
int error = 0;
+ u64 seq;
if (xfs_is_shutdown(mp))
return -EIO;
@@ -176,6 +177,7 @@ xfs_fs_map_blocks(
lock_flags = xfs_ilock_data_map_shared(ip);
error = xfs_bmapi_read(ip, offset_fsb, end_fsb - offset_fsb,
&imap, &nimaps, bmapi_flags);
+ seq = xfs_iomap_inode_sequence(ip, 0);
ASSERT(!nimaps || imap.br_startblock != DELAYSTARTBLOCK);
@@ -189,7 +191,7 @@ xfs_fs_map_blocks(
xfs_iunlock(ip, lock_flags);
error = xfs_iomap_write_direct(ip, offset_fsb,
- end_fsb - offset_fsb, 0, &imap);
+ end_fsb - offset_fsb, 0, &imap, &seq);
if (error)
goto out_unlock;
@@ -209,7 +211,7 @@ xfs_fs_map_blocks(
}
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- error = xfs_bmbt_to_iomap(ip, iomap, &imap, 0, 0);
+ error = xfs_bmbt_to_iomap(ip, iomap, &imap, 0, 0, seq);
*device_generation = mp->m_generation;
return error;
out_unlock:
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 9/9] xfs: drop write error injection is unfixable, remove it
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
` (7 preceding siblings ...)
2022-11-23 5:58 ` [PATCH 8/9] xfs: use iomap_valid method to detect stale cached iomaps Dave Chinner
@ 2022-11-23 5:58 ` Dave Chinner
2022-11-28 22:34 ` [PATCH 10/9] xfs: add debug knob to slow down writeback for fun Darrick J. Wong
2022-11-28 22:34 ` [PATCH 11/9] xfs: add debug knob to slow down write for fun Darrick J. Wong
10 siblings, 0 replies; 27+ messages in thread
From: Dave Chinner @ 2022-11-23 5:58 UTC (permalink / raw)
To: linux-xfs; +Cc: linux-fsdevel
From: Dave Chinner <dchinner@redhat.com>
With the changes to scan the page cache for dirty data to avoid data
corruptions from partial write cleanup racing with other page cache
operations, the drop writes error injection no longer works the same
way it used to and causes xfs/196 to fail. This is because xfs/196
writes to the file and populates the page cache before it turns on
the error injection and starts failing -overwrites-.
The result is that the original drop-writes code failed writes only
-after- overwriting the data in the cache, followed by invalidates
the cached data, then punching out the delalloc extent from under
that data.
On the surface, this looks fine. The problem is that page cache
invalidation *doesn't guarantee that it removes anything from the
page cache* and it doesn't change the dirty state of the folio. When
block size == page size and we do page aligned IO (as xfs/196 does)
everything happens to align perfectly and page cache invalidation
removes the single page folios that span the written data. Hence the
followup delalloc punch pass does not find cached data over that
range and it can punch the extent out.
IOWs, xfs/196 "works" for block size == page size with the new
code. I say "works", because it actually only works for the case
where IO is page aligned, and no data was read from disk before
writes occur. Because the moment we actually read data first, the
readahead code allocates multipage folios and suddenly the
invalidate code goes back to zeroing subfolio ranges without
changing dirty state.
Hence, with multipage folios in play, block size == page size is
functionally identical to block size < page size behaviour, and
drop-writes is manifestly broken w.r.t to this case. Invalidation of
a subfolio range doesn't result in the folio being removed from the
cache, just the range gets zeroed. Hence after we've sequentially
walked over a folio that we've dirtied (via write data) and then
invalidated, we end up with a dirty folio full of zeroed data.
And because the new code skips punching ranges that have dirty
folios covering them, we end up leaving the delalloc range intact
after failing all the writes. Hence failed writes now end up
writing zeroes to disk in the cases where invalidation zeroes folios
rather than removing them from cache.
This is a fundamental change of behaviour that is needed to avoid
the data corruption vectors that exist in the old write fail path,
and it renders the drop-writes injection non-functional and
unworkable as it stands.
As it is, I think the error injection is also now unnecessary, as
partial writes that need delalloc extent are going to be a lot more
common with stale iomap detection in place. Hence this patch removes
the drop-writes error injection completely. xfs/196 can remain for
testing kernels that don't have this data corruption fix, but those
that do will report:
xfs/196 3s ... [not run] XFS error injection drop_writes unknown on this kernel.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/libxfs/xfs_errortag.h | 12 +++++-------
fs/xfs/xfs_error.c | 27 ++++++++++++++++++++-------
fs/xfs/xfs_iomap.c | 9 ---------
3 files changed, 25 insertions(+), 23 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_errortag.h b/fs/xfs/libxfs/xfs_errortag.h
index 5362908164b0..580ccbd5aadc 100644
--- a/fs/xfs/libxfs/xfs_errortag.h
+++ b/fs/xfs/libxfs/xfs_errortag.h
@@ -40,13 +40,12 @@
#define XFS_ERRTAG_REFCOUNT_FINISH_ONE 25
#define XFS_ERRTAG_BMAP_FINISH_ONE 26
#define XFS_ERRTAG_AG_RESV_CRITICAL 27
+
/*
- * DEBUG mode instrumentation to test and/or trigger delayed allocation
- * block killing in the event of failed writes. When enabled, all
- * buffered writes are silenty dropped and handled as if they failed.
- * All delalloc blocks in the range of the write (including pre-existing
- * delalloc blocks!) are tossed as part of the write failure error
- * handling sequence.
+ * Drop-writes support removed because write error handling cannot trash
+ * pre-existing delalloc extents in any useful way anymore. We retain the
+ * definition so that we can reject it as an invalid value in
+ * xfs_errortag_valid().
*/
#define XFS_ERRTAG_DROP_WRITES 28
#define XFS_ERRTAG_LOG_BAD_CRC 29
@@ -95,7 +94,6 @@
#define XFS_RANDOM_REFCOUNT_FINISH_ONE 1
#define XFS_RANDOM_BMAP_FINISH_ONE 1
#define XFS_RANDOM_AG_RESV_CRITICAL 4
-#define XFS_RANDOM_DROP_WRITES 1
#define XFS_RANDOM_LOG_BAD_CRC 1
#define XFS_RANDOM_LOG_ITEM_PIN 1
#define XFS_RANDOM_BUF_LRU_REF 2
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index c6b2aabd6f18..dea3c0649d2f 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -46,7 +46,7 @@ static unsigned int xfs_errortag_random_default[] = {
XFS_RANDOM_REFCOUNT_FINISH_ONE,
XFS_RANDOM_BMAP_FINISH_ONE,
XFS_RANDOM_AG_RESV_CRITICAL,
- XFS_RANDOM_DROP_WRITES,
+ 0, /* XFS_RANDOM_DROP_WRITES has been removed */
XFS_RANDOM_LOG_BAD_CRC,
XFS_RANDOM_LOG_ITEM_PIN,
XFS_RANDOM_BUF_LRU_REF,
@@ -162,7 +162,6 @@ XFS_ERRORTAG_ATTR_RW(refcount_continue_update, XFS_ERRTAG_REFCOUNT_CONTINUE_UPDA
XFS_ERRORTAG_ATTR_RW(refcount_finish_one, XFS_ERRTAG_REFCOUNT_FINISH_ONE);
XFS_ERRORTAG_ATTR_RW(bmap_finish_one, XFS_ERRTAG_BMAP_FINISH_ONE);
XFS_ERRORTAG_ATTR_RW(ag_resv_critical, XFS_ERRTAG_AG_RESV_CRITICAL);
-XFS_ERRORTAG_ATTR_RW(drop_writes, XFS_ERRTAG_DROP_WRITES);
XFS_ERRORTAG_ATTR_RW(log_bad_crc, XFS_ERRTAG_LOG_BAD_CRC);
XFS_ERRORTAG_ATTR_RW(log_item_pin, XFS_ERRTAG_LOG_ITEM_PIN);
XFS_ERRORTAG_ATTR_RW(buf_lru_ref, XFS_ERRTAG_BUF_LRU_REF);
@@ -206,7 +205,6 @@ static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(refcount_finish_one),
XFS_ERRORTAG_ATTR_LIST(bmap_finish_one),
XFS_ERRORTAG_ATTR_LIST(ag_resv_critical),
- XFS_ERRORTAG_ATTR_LIST(drop_writes),
XFS_ERRORTAG_ATTR_LIST(log_bad_crc),
XFS_ERRORTAG_ATTR_LIST(log_item_pin),
XFS_ERRORTAG_ATTR_LIST(buf_lru_ref),
@@ -256,6 +254,19 @@ xfs_errortag_del(
kmem_free(mp->m_errortag);
}
+static bool
+xfs_errortag_valid(
+ unsigned int error_tag)
+{
+ if (error_tag >= XFS_ERRTAG_MAX)
+ return false;
+
+ /* Error out removed injection types */
+ if (error_tag == XFS_ERRTAG_DROP_WRITES)
+ return false;
+ return true;
+}
+
bool
xfs_errortag_test(
struct xfs_mount *mp,
@@ -277,7 +288,9 @@ xfs_errortag_test(
if (!mp->m_errortag)
return false;
- ASSERT(error_tag < XFS_ERRTAG_MAX);
+ if (!xfs_errortag_valid(error_tag))
+ return false;
+
randfactor = mp->m_errortag[error_tag];
if (!randfactor || prandom_u32_max(randfactor))
return false;
@@ -293,7 +306,7 @@ xfs_errortag_get(
struct xfs_mount *mp,
unsigned int error_tag)
{
- if (error_tag >= XFS_ERRTAG_MAX)
+ if (!xfs_errortag_valid(error_tag))
return -EINVAL;
return mp->m_errortag[error_tag];
@@ -305,7 +318,7 @@ xfs_errortag_set(
unsigned int error_tag,
unsigned int tag_value)
{
- if (error_tag >= XFS_ERRTAG_MAX)
+ if (!xfs_errortag_valid(error_tag))
return -EINVAL;
mp->m_errortag[error_tag] = tag_value;
@@ -319,7 +332,7 @@ xfs_errortag_add(
{
BUILD_BUG_ON(ARRAY_SIZE(xfs_errortag_random_default) != XFS_ERRTAG_MAX);
- if (error_tag >= XFS_ERRTAG_MAX)
+ if (!xfs_errortag_valid(error_tag))
return -EINVAL;
return xfs_errortag_set(mp, error_tag,
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 26ca3cc1a048..1bdd7afc1010 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -1190,15 +1190,6 @@ xfs_buffered_write_iomap_end(
struct xfs_mount *mp = XFS_M(inode->i_sb);
int error;
- /*
- * Behave as if the write failed if drop writes is enabled. Set the NEW
- * flag to force delalloc cleanup.
- */
- if (XFS_TEST_ERROR(false, mp, XFS_ERRTAG_DROP_WRITES)) {
- iomap->flags |= IOMAP_F_NEW;
- written = 0;
- }
-
error = iomap_file_buffered_write_punch_delalloc(inode, iomap, offset,
length, written, &xfs_buffered_write_delalloc_punch);
if (error && !xfs_is_shutdown(mp)) {
--
2.37.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 5/9] iomap: buffered write failure should not truncate the page cache
2022-11-23 5:58 ` [PATCH 5/9] iomap: buffered write failure should not truncate the page cache Dave Chinner
@ 2022-11-23 13:24 ` kernel test robot
0 siblings, 0 replies; 27+ messages in thread
From: kernel test robot @ 2022-11-23 13:24 UTC (permalink / raw)
To: Dave Chinner, linux-xfs; +Cc: oe-kbuild-all, linux-fsdevel
[-- Attachment #1: Type: text/plain, Size: 7551 bytes --]
Hi Dave,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on xfs-linux/for-next]
[also build test WARNING on linus/master v6.1-rc6 next-20221123]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Dave-Chinner/xfs-iomap-fix-data-corrupton-due-to-stale-cached-iomaps/20221123-135956
base: https://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git for-next
patch link: https://lore.kernel.org/r/20221123055812.747923-6-david%40fromorbit.com
patch subject: [PATCH 5/9] iomap: buffered write failure should not truncate the page cache
config: x86_64-allyesconfig
compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
reproduce (this is a W=1 build):
# https://github.com/intel-lab-lkp/linux/commit/9f88e3438e8c0e63b4d3610d2ea7d1900a6b4981
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Dave-Chinner/xfs-iomap-fix-data-corrupton-due-to-stale-cached-iomaps/20221123-135956
git checkout 9f88e3438e8c0e63b4d3610d2ea7d1900a6b4981
# save the config file
mkdir build_dir && cp config build_dir/.config
make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash fs/iomap/
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
fs/iomap/buffered-io.c: In function 'iomap_file_buffered_write_punch_delalloc':
>> fs/iomap/buffered-io.c:1032:33: warning: unused variable 'error' [-Wunused-variable]
1032 | int error = 0;
| ^~~~~
vim +/error +1032 fs/iomap/buffered-io.c
9f88e3438e8c0e6 Dave Chinner 2022-11-23 993
dfd153a8d32fb12 Dave Chinner 2022-11-23 994 /*
dfd153a8d32fb12 Dave Chinner 2022-11-23 995 * When a short write occurs, the filesystem may need to remove reserved space
dfd153a8d32fb12 Dave Chinner 2022-11-23 996 * that was allocated in ->iomap_begin from it's ->iomap_end method. For
dfd153a8d32fb12 Dave Chinner 2022-11-23 997 * filesystems that use delayed allocation, we need to punch out delalloc
dfd153a8d32fb12 Dave Chinner 2022-11-23 998 * extents from the range that are not dirty in the page cache. As the write can
dfd153a8d32fb12 Dave Chinner 2022-11-23 999 * race with page faults, there can be dirty pages over the delalloc extent
dfd153a8d32fb12 Dave Chinner 2022-11-23 1000 * outside the range of a short write but still within the delalloc extent
dfd153a8d32fb12 Dave Chinner 2022-11-23 1001 * allocated for this iomap.
dfd153a8d32fb12 Dave Chinner 2022-11-23 1002 *
dfd153a8d32fb12 Dave Chinner 2022-11-23 1003 * This function uses [start_byte, end_byte) intervals (i.e. open ended) to
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1004 * simplify range iterations.
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1005 *
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1006 * The punch() callback *must* only punch delalloc extents in the range passed
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1007 * to it. It must skip over all other types of extents in the range and leave
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1008 * them completely unchanged. It must do this punch atomically with respect to
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1009 * other extent modifications.
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1010 *
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1011 * The punch() callback may be called with a folio locked to prevent writeback
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1012 * extent allocation racing at the edge of the range we are currently punching.
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1013 * The locked folio may or may not cover the range being punched, so it is not
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1014 * safe for the punch() callback to lock folios itself.
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1015 *
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1016 * Lock order is:
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1017 *
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1018 * inode->i_rwsem (shared or exclusive)
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1019 * inode->i_mapping->invalidate_lock (exclusive)
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1020 * folio_lock()
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1021 * ->punch
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1022 * internal filesystem allocation lock
dfd153a8d32fb12 Dave Chinner 2022-11-23 1023 */
dfd153a8d32fb12 Dave Chinner 2022-11-23 1024 int iomap_file_buffered_write_punch_delalloc(struct inode *inode,
dfd153a8d32fb12 Dave Chinner 2022-11-23 1025 struct iomap *iomap, loff_t pos, loff_t length,
dfd153a8d32fb12 Dave Chinner 2022-11-23 1026 ssize_t written,
dfd153a8d32fb12 Dave Chinner 2022-11-23 1027 int (*punch)(struct inode *inode, loff_t pos, loff_t length))
dfd153a8d32fb12 Dave Chinner 2022-11-23 1028 {
dfd153a8d32fb12 Dave Chinner 2022-11-23 1029 loff_t start_byte;
dfd153a8d32fb12 Dave Chinner 2022-11-23 1030 loff_t end_byte;
dfd153a8d32fb12 Dave Chinner 2022-11-23 1031 int blocksize = i_blocksize(inode);
dfd153a8d32fb12 Dave Chinner 2022-11-23 @1032 int error = 0;
dfd153a8d32fb12 Dave Chinner 2022-11-23 1033
dfd153a8d32fb12 Dave Chinner 2022-11-23 1034 if (iomap->type != IOMAP_DELALLOC)
dfd153a8d32fb12 Dave Chinner 2022-11-23 1035 return 0;
dfd153a8d32fb12 Dave Chinner 2022-11-23 1036
dfd153a8d32fb12 Dave Chinner 2022-11-23 1037 /* If we didn't reserve the blocks, we're not allowed to punch them. */
dfd153a8d32fb12 Dave Chinner 2022-11-23 1038 if (!(iomap->flags & IOMAP_F_NEW))
dfd153a8d32fb12 Dave Chinner 2022-11-23 1039 return 0;
dfd153a8d32fb12 Dave Chinner 2022-11-23 1040
dfd153a8d32fb12 Dave Chinner 2022-11-23 1041 /*
dfd153a8d32fb12 Dave Chinner 2022-11-23 1042 * start_byte refers to the first unused block after a short write. If
dfd153a8d32fb12 Dave Chinner 2022-11-23 1043 * nothing was written, round offset down to point at the first block in
dfd153a8d32fb12 Dave Chinner 2022-11-23 1044 * the range.
dfd153a8d32fb12 Dave Chinner 2022-11-23 1045 */
dfd153a8d32fb12 Dave Chinner 2022-11-23 1046 if (unlikely(!written))
dfd153a8d32fb12 Dave Chinner 2022-11-23 1047 start_byte = round_down(pos, blocksize);
dfd153a8d32fb12 Dave Chinner 2022-11-23 1048 else
dfd153a8d32fb12 Dave Chinner 2022-11-23 1049 start_byte = round_up(pos + written, blocksize);
dfd153a8d32fb12 Dave Chinner 2022-11-23 1050 end_byte = round_up(pos + length, blocksize);
dfd153a8d32fb12 Dave Chinner 2022-11-23 1051
dfd153a8d32fb12 Dave Chinner 2022-11-23 1052 /* Nothing to do if we've written the entire delalloc extent */
dfd153a8d32fb12 Dave Chinner 2022-11-23 1053 if (start_byte >= end_byte)
dfd153a8d32fb12 Dave Chinner 2022-11-23 1054 return 0;
dfd153a8d32fb12 Dave Chinner 2022-11-23 1055
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1056 return iomap_write_delalloc_release(inode, start_byte, end_byte,
9f88e3438e8c0e6 Dave Chinner 2022-11-23 1057 punch);
dfd153a8d32fb12 Dave Chinner 2022-11-23 1058 }
dfd153a8d32fb12 Dave Chinner 2022-11-23 1059 EXPORT_SYMBOL_GPL(iomap_file_buffered_write_punch_delalloc);
dfd153a8d32fb12 Dave Chinner 2022-11-23 1060
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 291876 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 6.1.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-8) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23900
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23900
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_TIME_KUNIT_TEST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_BPF_LSM=y
# end of BPF subsystem
CONFIG_PREEMPT_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
CONFIG_SCHED_CORE=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_EXP_KTHREAD=y
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y
CONFIG_RCU_NOCB_CPU_CB_BOOST=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_UCLAMP_TASK_GROUP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
CONFIG_DEBUG_RSEQ=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
CONFIG_X86_VSMP=y
CONFIG_X86_UV=y
CONFIG_X86_GOLDFISH=y
CONFIG_X86_INTEL_MID=y
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_512GB=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_PV_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_PVHVM_GUEST=y
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_XEN_PVH=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PV_MSR_SAFE=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_JAILHOUSE_GUEST=y
CONFIG_ACRN_GUEST=y
CONFIG_INTEL_TDX_GUEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=12
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
CONFIG_PERF_EVENTS_AMD_UNCORE=y
CONFIG_PERF_EVENTS_AMD_BRS=y
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_LATE_LOADING=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_X86_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_X86_SGX=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_SIG=y
CONFIG_KEXEC_SIG_FORCE=y
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=y
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_STRICT_SIGALTSTACK_SIZE=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_SPECULATION_MITIGATIONS=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_RETPOLINE=y
CONFIG_RETHUNK=y
CONFIG_CPU_UNRET_ENTRY=y
CONFIG_CPU_IBPB_ENTRY=y
CONFIG_CPU_IBRS_ENTRY=y
CONFIG_SLS=y
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_USERSPACE_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_TABLE_LIB=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_FPDT=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_ACPI_NFIT=y
CONFIG_NFIT_SECURITY_DEBUG=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=y
CONFIG_ACPI_APEI_ERST_DEBUG=y
CONFIG_ACPI_DPTF=y
CONFIG_DPTF_POWER=y
CONFIG_DPTF_PCH_FIVR=y
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=y
CONFIG_ACPI_ADXL=y
CONFIG_ACPI_CONFIGFS=y
CONFIG_ACPI_PFRUT=y
CONFIG_ACPI_PCC=y
CONFIG_PMIC_OPREGION=y
CONFIG_BYTCRC_PMIC_OPREGION=y
CONFIG_CHTCRC_PMIC_OPREGION=y
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_CHT_WC_PMIC_OPREGION=y
CONFIG_CHT_DC_TI_PMIC_OPREGION=y
CONFIG_TPS68470_PMIC_OPREGION=y
CONFIG_ACPI_VIOT=y
CONFIG_ACPI_PRMT=y
CONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_AMD_PSTATE=y
CONFIG_X86_AMD_PSTATE_UT=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_AMD_FREQ_SENSITIVITY=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_P4_CLOCKMOD=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_CPU_IDLE_GOV_HALTPOLL=y
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
CONFIG_X86_X32_ABI=y
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_INTEL=y
CONFIG_X86_SGX_KVM=y
CONFIG_KVM_AMD=y
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_XEN=y
CONFIG_KVM_EXTERNAL_WRITE_TRACKING=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_IMA_KEXEC=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_STATIC_CALL_SELFTEST=y
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_CC_PLATFORM=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_HAVE_ARCH_NODE_DEV_GROUP=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BFQ_CGROUP_DEBUG=y
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_THP_SWAP=y
CONFIG_READ_ONLY_THP_FOR_FS=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=19
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_HMM_MIRROR=y
CONFIG_GET_FREE_REGION=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_PTE_MARKER=y
CONFIG_PTE_MARKER_UFFD_WP=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
CONFIG_LRU_GEN_STATS=y
#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_KUNIT_TEST=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_VADDR_KUNIT_TEST=y
CONFIG_DAMON_SYSFS=y
CONFIG_DAMON_DBGFS=y
CONFIG_DAMON_DBGFS_KUNIT_TEST=y
CONFIG_DAMON_RECLAIM=y
CONFIG_DAMON_LRU_SORT=y
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_WANT_COMPAT_NETLINK_MESSAGES=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
CONFIG_TLS=y
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_USER_COMPAT=y
CONFIG_XFRM_INTERFACE=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=y
CONFIG_SMC_DIAG=y
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_TCP_CONG_DCTCP=y
CONFIG_TCP_CONG_CDG=y
CONFIG_TCP_CONG_BBR=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
# CONFIG_DEFAULT_CDG is not set
# CONFIG_DEFAULT_BBR is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_ESP_OFFLOAD=y
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_MPTCP_KUNIT_TEST=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=y
CONFIG_NFT_CT=y
CONFIG_NFT_FLOW_OFFLOAD=y
CONFIG_NFT_CONNLIMIT=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_TUNNEL=y
CONFIG_NFT_OBJREF=y
CONFIG_NFT_QUEUE=y
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
CONFIG_NFT_FIB=y
CONFIG_NFT_FIB_INET=y
CONFIG_NFT_XFRM=y
CONFIG_NFT_SOCKET=y
CONFIG_NFT_OSF=y
CONFIG_NFT_TPROXY=y
CONFIG_NFT_SYNPROXY=y
CONFIG_NF_DUP_NETDEV=y
CONFIG_NFT_DUP_NETDEV=y
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NFT_FIB_NETDEV=y
CONFIG_NFT_REJECT_NETDEV=y
CONFIG_NF_FLOW_TABLE_INET=y
CONFIG_NF_FLOW_TABLE=y
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
CONFIG_NETFILTER_XT_SET=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# end of Core Netfilter Configuration
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_FO=y
CONFIG_IP_VS_OVF=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_MH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
CONFIG_IP_VS_TWOS=y
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NFT_FIB_IPV4=y
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NFT_DUP_IPV6=y
CONFIG_NFT_FIB_IPV6=y
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_SRH=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_CONNTRACK_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_BPFILTER=y
CONFIG_BPFILTER_UMH=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_AR9331=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_HELLCREEK=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA_COMMON=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NET_DSA_TAG_OCELOT=y
CONFIG_NET_DSA_TAG_OCELOT_8021Q=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_DSA_TAG_RTL4_A=y
CONFIG_NET_DSA_TAG_RTL8_4=y
CONFIG_NET_DSA_TAG_RZN1_A5PSW=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_SJA1105=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_TAG_XRS700X=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
CONFIG_6LOWPAN_NHC_FRAGMENT=y
CONFIG_6LOWPAN_NHC_HOP=y
CONFIG_6LOWPAN_NHC_IPV6=y
CONFIG_6LOWPAN_NHC_MOBILITY=y
CONFIG_6LOWPAN_NHC_ROUTING=y
CONFIG_6LOWPAN_NHC_UDP=y
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=y
CONFIG_6LOWPAN_GHC_UDP=y
CONFIG_6LOWPAN_GHC_ICMPV6=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=y
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=y
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_FQ_PIE=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
# CONFIG_DEFAULT_FQ_CODEL is not set
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_EMATCH_IPT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_SAMPLE=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_CSUM=y
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=y
CONFIG_NET_ACT_BPF=y
CONFIG_NET_ACT_CONNMARK=y
CONFIG_NET_ACT_CTINFO=y
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_CT=y
CONFIG_NET_ACT_GATE=y
CONFIG_NET_IFE_SKBMARK=y
CONFIG_NET_IFE_SKBPRIO=y
CONFIG_NET_IFE_SKBTCINDEX=y
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_BATMAN_ADV_TRACING=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_OPENVSWITCH_GENEVE=y
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VMWARE_VMCI_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_HYPERV_VSOCKETS=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=y
CONFIG_QRTR_SMD=y
CONFIG_QRTR_TUN=y
CONFIG_QRTR_MHI=y
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
# end of AX.25 network device drivers
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
CONFIG_BT_SELFTEST=y
CONFIG_BT_SELFTEST_ECDH=y
CONFIG_BT_SELFTEST_SMP=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_BCM=y
CONFIG_BT_RTL=y
CONFIG_BT_QCA=y
CONFIG_BT_MTK=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_ATH3K=y
CONFIG_BT_MTKSDIO=y
CONFIG_BT_MTKUART=y
CONFIG_BT_HCIRSI=y
CONFIG_BT_VIRTIO=y
# end of Bluetooth device drivers
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_TEST=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR=""
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_OCB_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_XEN=y
CONFIG_NET_9P_RDMA=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=y
CONFIG_NFC_MEI_PHY=y
CONFIG_NFC_SIM=y
CONFIG_NFC_PORT100=y
CONFIG_NFC_VIRTUAL_NCI=y
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_PN544_MEI=y
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_I2C=y
CONFIG_NFC_MICROREAD_MEI=y
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_MRVL_I2C=y
CONFIG_NFC_MRVL_SPI=y
CONFIG_NFC_ST21NFCA=y
CONFIG_NFC_ST21NFCA_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
CONFIG_NFC_ST_NCI_SPI=y
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_S3FWRN82_UART=y
CONFIG_NFC_ST95HF=y
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
CONFIG_PCIE_EDR=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=y
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_P2PDMA=y
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
CONFIG_PCI_FTPCI100=y
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCIE_XILINX=y
CONFIG_VMD=y
CONFIG_PCI_HYPERV_INTERFACE=y
CONFIG_PCIE_MICROCHIP_HOST=y
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
CONFIG_PCIE_DW_PLAT_EP=y
CONFIG_PCIE_INTEL_GW=y
CONFIG_PCI_MESON=y
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
CONFIG_PCIE_CADENCE_PLAT_EP=y
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
CONFIG_PCI_J721E_EP=y
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=y
CONFIG_PCI_EPF_NTB=y
CONFIG_PCI_EPF_VNTB=y
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers
CONFIG_CXL_BUS=y
CONFIG_CXL_PCI=y
CONFIG_CXL_MEM_RAW_COMMANDS=y
CONFIG_CXL_ACPI=y
CONFIG_CXL_PMEM=y
CONFIG_CXL_MEM=y
CONFIG_CXL_PORT=y
CONFIG_CXL_SUSPEND=y
CONFIG_CXL_REGION=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_RXS_GEN3=y
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_CACHE=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_HMEM_REPORTING=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_SOUNDWIRE_MBQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_REGMAP_I3C=y
CONFIG_REGMAP_SPI_AVMM=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_MOXTET=y
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_PCI_GENERIC=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=y
CONFIG_CS_DSP=y
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_SMI=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY=y
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
CONFIG_EFI_FAKE_MEMMAP=y
CONFIG_EFI_MAX_FAKE_MEM=8
CONFIG_EFI_SOFT_RESERVE=y
CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
CONFIG_EFI_BOOTLOADER_CONTROL=y
CONFIG_EFI_CAPSULE_LOADER=y
CONFIG_EFI_TEST=y
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_APPLE_PROPERTIES=y
CONFIG_RESET_ATTACK_MITIGATION=y
CONFIG_EFI_RCI2_TABLE=y
CONFIG_EFI_DISABLE_PCI_DMA=y
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
CONFIG_EFI_DISABLE_RUNTIME=y
CONFIG_EFI_COCO_SECRET=y
CONFIG_EFI_EMBEDDED_FIRMWARE=y
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_GNSS_USB=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_PSTORE=y
CONFIG_MTD_SWAP=y
CONFIG_MTD_PARTITIONED_MASTER=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_VERSATILE=y
CONFIG_MTD_PHYSMAP_GEMINI=y
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
CONFIG_MTD_L440GX=y
CONFIG_MTD_PCI=y
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_MCHP23K256=y
CONFIG_MTD_MCHP48L640=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=y
#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_MXIC=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CADENCE=y
CONFIG_MTD_NAND_ARASAN=y
CONFIG_MTD_NAND_INTEL_LGM=y
#
# Misc
#
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=y
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=y
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=y
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=y
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_FD_RAWCMD=y
CONFIG_CDROM=y
CONFIG_PARIDE=y
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
CONFIG_PARIDE_PCD=y
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
CONFIG_PARIDE_PG=y
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
CONFIG_PARIDE_BPCK=y
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
CONFIG_PARIDE_EPAT=y
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=y
CONFIG_PARIDE_FRIQ=y
CONFIG_PARIDE_FRPW=y
CONFIG_PARIDE_KBIC=y
CONFIG_PARIDE_KTTI=y
CONFIG_PARIDE_ON20=y
CONFIG_PARIDE_ON26=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
CONFIG_ZRAM=y
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=y
CONFIG_BLK_DEV_UBLK=y
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=y
CONFIG_BLK_DEV_RNBD_SERVER=y
#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_RDMA=y
CONFIG_NVME_FC=y
CONFIG_NVME_TCP=y
CONFIG_NVME_AUTH=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_RDMA=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_SGI_XP=y
CONFIG_HI6421V600_IRQ=y
CONFIG_HP_ILO=y
CONFIG_SGI_GRU=y
CONFIG_SGI_GRU_DEBUG=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_VMWARE_BALLOON=y
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=y
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_INTEL_MEI_GSC=y
CONFIG_INTEL_MEI_HDCP=y
CONFIG_INTEL_MEI_PXP=y
CONFIG_VMWARE_VMCI=y
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
CONFIG_BCM_VK=y
CONFIG_BCM_VK_TTY=y
CONFIG_MISC_ALCOR_PCI=y
CONFIG_MISC_RTSX_PCI=y
CONFIG_MISC_RTSX_USB=y
CONFIG_HABANA_AI=y
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
CONFIG_PVPANIC_PCI=y
CONFIG_GP_PCI1XXXX=y
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AHA1740=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPI3MR=y
CONFIG_SCSI_SMARTPQI=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_SCSI_MYRB=y
CONFIG_SCSI_MYRS=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_XEN_SCSI_FRONTEND=y
CONFIG_HYPERV_STORAGE=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_SNIC=y
CONFIG_SCSI_SNIC_DEBUG_FS=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_FDOMAIN=y
CONFIG_SCSI_FDOMAIN_PCI=y
CONFIG_SCSI_ISCI=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_TCM_QLA2XXX=y
CONFIG_TCM_QLA2XXX_DEBUG=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_QEDI=y
CONFIG_QEDF=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_LPFC_DEBUG_FS=y
CONFIG_SCSI_EFCT=y
CONFIG_SCSI_SIM710=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_AM53C974=y
CONFIG_SCSI_WD719X=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_CHELSIO_FCOE=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_DWC=y
CONFIG_AHCI_CEVA=y
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_DWC=y
CONFIG_SATA_DWC_OLD_DMA=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_RZ1000=y
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_MD_CLUSTER=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_UNSTRIPED=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
CONFIG_DM_WRITECACHE=y
CONFIG_DM_EBS=y
CONFIG_DM_ERA=y
CONFIG_DM_CLONE=y
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_MULTIPATH_HST=y
CONFIG_DM_MULTIPATH_IOA=y
CONFIG_DM_DELAY=y
CONFIG_DM_DUST=y
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
CONFIG_DM_LOG_WRITES=y
CONFIG_DM_INTEGRITY=y
CONFIG_DM_ZONED=y
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_TCM_USER2=y
CONFIG_LOOPBACK_TARGET=y
CONFIG_TCM_FC=y
CONFIG_ISCSI_TARGET=y
CONFIG_ISCSI_TARGET_CXGB4=y
CONFIG_SBP_TARGET=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_WIREGUARD=y
CONFIG_WIREGUARD_DEBUG=y
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
CONFIG_IFB=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_RANDOM=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
CONFIG_IPVTAP=y
CONFIG_VXLAN=y
CONFIG_GENEVE=y
CONFIG_BAREUDP=y
CONFIG_GTP=y
CONFIG_AMT=y
CONFIG_MACSEC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=y
CONFIG_RIONET=y
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
CONFIG_TAP=y
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_NET_VRF=y
CONFIG_VSOCKMON=y
CONFIG_MHI_NET=y
CONFIG_SUNGEM_PHY=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_ARCNET_COM20020_CS=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=y
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_TTY=y
CONFIG_CAIF_VIRTIO=y
#
# Distributed Switch Architecture drivers
#
CONFIG_B53=y
CONFIG_B53_SPI_DRIVER=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_B53_SERDES=y
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=y
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=y
CONFIG_NET_DSA_MICROCHIP_KSZ_SPI=y
CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MSCC_SEVILLE=y
CONFIG_NET_DSA_AR9331=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_SJA1105=y
CONFIG_NET_DSA_SJA1105_PTP=y
CONFIG_NET_DSA_SJA1105_TAS=y
CONFIG_NET_DSA_SJA1105_VL=y
CONFIG_NET_DSA_XRS700X=y
CONFIG_NET_DSA_XRS700X_I2C=y
CONFIG_NET_DSA_XRS700X_MDIO=y
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_MDIO=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=y
CONFIG_NET_DSA_SMSC_LAN9303=y
CONFIG_NET_DSA_SMSC_LAN9303_I2C=y
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
CONFIG_NET_DSA_VITESSE_VSC73XX=y
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=y
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=y
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_3C589=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=y
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_ALTERA_TSE=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=y
CONFIG_PCNET32=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_AMD_XGBE=y
CONFIG_AMD_XGBE_DCB=y
CONFIG_AMD_XGBE_HAVE_ECC=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=y
CONFIG_SPI_AX88796C_COMPRESSION=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_ALX=y
CONFIG_CX_ECAT=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=y
CONFIG_BNX2X_SRIOV=y
CONFIG_SYSTEMPORT=y
CONFIG_BNXT=y
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=y
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_THUNDER_NIC_PF=y
CONFIG_THUNDER_NIC_VF=y
CONFIG_THUNDER_NIC_BGX=y
CONFIG_THUNDER_NIC_RGX=y
CONFIG_CAVIUM_PTP=y
CONFIG_LIQUIDIO=y
CONFIG_LIQUIDIO_VF=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4_DCB=y
CONFIG_CHELSIO_T4_FCOE=y
CONFIG_CHELSIO_T4VF=y
CONFIG_CHELSIO_LIB=y
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_CRYPTO_DEV_CHELSIO_TLS=y
CONFIG_CHELSIO_IPSEC_INLINE=y
CONFIG_CHELSIO_TLS_DEVICE=y
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=y
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9051=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=y
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=y
CONFIG_TSNEP_SELFTESTS=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_FUN_CORE=y
CONFIG_FUN_ETH=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_HINIC=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=y
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=y
CONFIG_I40E_DCB=y
CONFIG_IAVF=y
CONFIG_I40EVF=y
CONFIG_ICE=y
CONFIG_ICE_SWITCHDEV=y
CONFIG_ICE_HWTS=y
CONFIG_FM10K=y
CONFIG_IGC=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_NGBE=y
CONFIG_TXGBE=y
CONFIG_JME=y
CONFIG_NET_VENDOR_ADI=y
CONFIG_ADIN1110=y
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_OCTEON_EP=y
CONFIG_PRESTERA=y
CONFIG_PRESTERA_PCI=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=y
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_BRIDGE=y
CONFIG_MLX5_CLS_ACT=y
CONFIG_MLX5_TC_CT=y
CONFIG_MLX5_TC_SAMPLE=y
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_IPOIB=y
CONFIG_MLX5_EN_MACSEC=y
CONFIG_MLX5_EN_IPSEC=y
CONFIG_MLX5_EN_TLS=y
CONFIG_MLX5_SW_STEERING=y
CONFIG_MLX5_SF=y
CONFIG_MLX5_SF_MANAGER=y
CONFIG_MLXSW_CORE=y
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=y
CONFIG_MLXSW_I2C=y
CONFIG_MLXSW_SPECTRUM=y
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=y
CONFIG_MLXFW=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_KSZ884X_PCI=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ENCX24J600=y
CONFIG_LAN743X=y
CONFIG_LAN966X_SWITCH=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=y
CONFIG_MSCC_OCELOT_SWITCH=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_MICROSOFT_MANA=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=y
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=y
CONFIG_NS83820=y
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=y
CONFIG_NFP_APP_FLOWER=y
CONFIG_NFP_APP_ABM_NIC=y
CONFIG_NFP_DEBUG=y
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=y
CONFIG_NE2K_PCI=y
CONFIG_PCMCIA_PCNET=y
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_IONIC=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=y
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=y
CONFIG_QED=y
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=y
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=y
CONFIG_QCA7000_SPI=y
CONFIG_QCA7000_UART=y
CONFIG_QCOM_EMAC=y
CONFIG_RMNET=y
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=y
CONFIG_SIS190=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=y
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=y
CONFIG_SFC_FALCON_MTD=y
CONFIG_SFC_SIENA=y
CONFIG_SFC_SIENA_MTD=y
CONFIG_SFC_SIENA_MCDI_MON=y
CONFIG_SFC_SIENA_SRIOV=y
CONFIG_SFC_SIENA_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_EPIC100=y
CONFIG_SMSC911X=y
CONFIG_SMSC9420=y
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_SELFTESTS=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_DWMAC_GENERIC=y
CONFIG_DWMAC_INTEL_PLAT=y
CONFIG_DWMAC_INTEL=y
CONFIG_DWMAC_LOONGSON=y
CONFIG_STMMAC_PCI=y
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NIU=y
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=y
CONFIG_DWC_XLGMAC_PCI=y
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_CPSW_PHY_SEL=y
CONFIG_TLAN=y
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=y
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=y
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=y
CONFIG_XILINX_AXI_EMAC=y
CONFIG_XILINX_LL_TEMAC=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_SKFP=y
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_NET_SB1000=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=y
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
CONFIG_ADIN_PHY=y
CONFIG_ADIN1100_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM84881_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NET_PHYPTP=y
CONFIG_CICADA_PHY=y
CONFIG_CORTINA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_LXT_PHY=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88X2222_PHY=y
CONFIG_MAXLINEAR_GPHY=y
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=y
CONFIG_MICROSEMI_PHY=y
CONFIG_MOTORCOMM_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_NXP_C45_TJA11XX_PHY=y
CONFIG_NXP_TJA11XX_PHY=y
CONFIG_AT803X_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
CONFIG_TERANETICS_PHY=y
CONFIG_DP83822_PHY=y
CONFIG_DP83TC811_PHY=y
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_DP83869_PHY=y
CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_MICREL_KS8995MA=y
CONFIG_PSE_CONTROLLER=y
CONFIG_PSE_REGULATOR=y
CONFIG_CAN_DEV=y
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
CONFIG_CAN_CAN327=y
CONFIG_CAN_FLEXCAN=y
CONFIG_CAN_GRCAN=y
CONFIG_CAN_JANZ_ICAN3=y
CONFIG_CAN_KVASER_PCIEFD=y
CONFIG_CAN_SLCAN=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_C_CAN_PCI=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y
CONFIG_CAN_CTUCANFD=y
CONFIG_CAN_CTUCANFD_PCI=y
CONFIG_CAN_CTUCANFD_PLATFORM=y
CONFIG_CAN_IFI_CANFD=y
CONFIG_CAN_M_CAN=y
CONFIG_CAN_M_CAN_PCI=y
CONFIG_CAN_M_CAN_PLATFORM=y
CONFIG_CAN_M_CAN_TCAN4X5X=y
CONFIG_CAN_PEAK_PCIEFD=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_EMS_PCI=y
CONFIG_CAN_EMS_PCMCIA=y
CONFIG_CAN_F81601=y
CONFIG_CAN_KVASER_PCI=y
CONFIG_CAN_PEAK_PCI=y
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PEAK_PCMCIA=y
CONFIG_CAN_PLX_PCI=y
CONFIG_CAN_SJA1000_ISA=y
CONFIG_CAN_SJA1000_PLATFORM=y
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y
#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=y
CONFIG_CAN_MCP251X=y
CONFIG_CAN_MCP251XFD=y
CONFIG_CAN_MCP251XFD_SANITY=y
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=y
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB=y
CONFIG_CAN_ETAS_ES58X=y
CONFIG_CAN_GS_USB=y
CONFIG_CAN_KVASER_USB=y
CONFIG_CAN_MCBA_USB=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_UCAN=y
# end of CAN USB interfaces
CONFIG_CAN_DEBUG_DEVICES=y
#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=y
CONFIG_MCTP_TRANSPORT_I2C=y
# end of MCTP Device Drivers
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_HISI_FEMAC=y
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MVUSB=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_OCTEON=y
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y
CONFIG_MDIO_THUNDER=y
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
#
# PCS device drivers
#
CONFIG_PCS_XPCS=y
CONFIG_PCS_LYNX=y
CONFIG_PCS_ALTERA_TSE=y
# end of PCS device drivers
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
CONFIG_PPPOE=y
CONFIG_PPTP=y
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SR9700=y
CONFIG_USB_NET_SR9800=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_USB_NET_CH9200=y
CONFIG_USB_NET_AQC111=y
CONFIG_USB_RTL8153_ECM=y
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=y
CONFIG_ATH_COMMON=y
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH_TRACEPOINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_CERT_TESTING=y
CONFIG_ATH5K=y
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_TRACER=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH5K_TEST_CHANNELS=y
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_TX99=y
CONFIG_ATH9K_DFS_CERTIFIED=y
CONFIG_ATH9K_DYNACK=y
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_PCI_NO_EEPROM=y
CONFIG_ATH9K_HTC=y
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_HWRNG=y
CONFIG_ATH9K_COMMON_SPECTRAL=y
CONFIG_CARL9170=y
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=y
CONFIG_ATH6KL_SDIO=y
CONFIG_ATH6KL_USB=y
CONFIG_ATH6KL_DEBUG=y
CONFIG_ATH6KL_TRACING=y
CONFIG_ATH6KL_REGDOMAIN=y
CONFIG_AR5523=y
CONFIG_WIL6210=y
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=y
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=y
CONFIG_ATH10K_AHB=y
CONFIG_ATH10K_SDIO=y
CONFIG_ATH10K_USB=y
CONFIG_ATH10K_DEBUG=y
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_SPECTRAL=y
CONFIG_ATH10K_TRACING=y
CONFIG_ATH10K_DFS_CERTIFIED=y
CONFIG_WCN36XX=y
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_ATH11K=y
CONFIG_ATH11K_AHB=y
CONFIG_ATH11K_PCI=y
CONFIG_ATH11K_DEBUG=y
CONFIG_ATH11K_DEBUGFS=y
CONFIG_ATH11K_TRACING=y
CONFIG_ATH11K_SPECTRAL=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_AT76C50X_USB=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=y
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
CONFIG_BRCMSMAC_LEDS=y
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO=y
CONFIG_AIRO_CS=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=y
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLEGACY=y
CONFIG_IWL4965=y
CONFIG_IWL3945=y
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
# end of iwl3945 / iwl4965 Debugging Options
CONFIG_IWLWIFI=y
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=y
CONFIG_IWLMVM=y
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
# end of Debugging Options
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=y
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
CONFIG_PCI_HERMES=y
CONFIG_PCMCIA_HERMES=y
CONFIG_PCMCIA_SPECTRUM=y
CONFIG_ORINOCO_USB=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
CONFIG_P54_SPI=y
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_CS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_SPI=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_MWIFIEX_PCIE=y
CONFIG_MWIFIEX_USB=y
CONFIG_MWL8K=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=y
CONFIG_MT76_CORE=y
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=y
CONFIG_MT76_SDIO=y
CONFIG_MT76x02_LIB=y
CONFIG_MT76x02_USB=y
CONFIG_MT76_CONNAC_LIB=y
CONFIG_MT76x0_COMMON=y
CONFIG_MT76x0U=y
CONFIG_MT76x0E=y
CONFIG_MT76x2_COMMON=y
CONFIG_MT76x2E=y
CONFIG_MT76x2U=y
CONFIG_MT7603E=y
CONFIG_MT7615_COMMON=y
CONFIG_MT7615E=y
CONFIG_MT7663_USB_SDIO_COMMON=y
CONFIG_MT7663U=y
CONFIG_MT7663S=y
CONFIG_MT7915E=y
CONFIG_MT7921_COMMON=y
CONFIG_MT7921E=y
CONFIG_MT7921S=y
CONFIG_MT7921U=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=y
CONFIG_WILC1000_SDIO=y
CONFIG_WILC1000_SPI=y
CONFIG_WILC1000_HW_OOB_INTR=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_PLFXLC=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=y
CONFIG_RT2400PCI=y
CONFIG_RT2500PCI=y
CONFIG_RT61PCI=y
CONFIG_RT2800PCI=y
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=y
CONFIG_RT73USB=y
CONFIG_RT2800USB=y
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=y
CONFIG_RT2800_LIB_MMIO=y
CONFIG_RT2X00_LIB_MMIO=y
CONFIG_RT2X00_LIB_PCI=y
CONFIG_RT2X00_LIB_USB=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=y
CONFIG_RTL8192CE=y
CONFIG_RTL8192SE=y
CONFIG_RTL8192DE=y
CONFIG_RTL8723AE=y
CONFIG_RTL8723BE=y
CONFIG_RTL8188EE=y
CONFIG_RTL8192EE=y
CONFIG_RTL8821AE=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_PCI=y
CONFIG_RTLWIFI_USB=y
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=y
CONFIG_RTL8723_COMMON=y
CONFIG_RTLBTCOEXIST=y
CONFIG_RTL8XXXU=y
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=y
CONFIG_RTW88_CORE=y
CONFIG_RTW88_PCI=y
CONFIG_RTW88_8822B=y
CONFIG_RTW88_8822C=y
CONFIG_RTW88_8723D=y
CONFIG_RTW88_8821C=y
CONFIG_RTW88_8822BE=y
CONFIG_RTW88_8822CE=y
CONFIG_RTW88_8723DE=y
CONFIG_RTW88_8821CE=y
CONFIG_RTW88_DEBUG=y
CONFIG_RTW88_DEBUGFS=y
CONFIG_RTW89=y
CONFIG_RTW89_CORE=y
CONFIG_RTW89_PCI=y
CONFIG_RTW89_8852A=y
CONFIG_RTW89_8852C=y
CONFIG_RTW89_8852AE=y
CONFIG_RTW89_8852CE=y
CONFIG_RTW89_DEBUG=y
CONFIG_RTW89_DEBUGMSG=y
CONFIG_RTW89_DEBUGFS=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=y
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=y
CONFIG_RSI_USB=y
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WFX=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
CONFIG_CW1200_WLAN_SPI=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
CONFIG_WL1251_SDIO=y
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SPI=y
CONFIG_WLCORE_SDIO=y
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=y
CONFIG_ZD1211RW=y
CONFIG_ZD1211RW_DEBUG=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=y
CONFIG_QTNFMAC_PCIE=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_MAC80211_HWSIM=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_VIRT_WIFI=y
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
CONFIG_PC300TOO=y
CONFIG_FARSYNC=y
CONFIG_LAPBETHER=y
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKELB=y
CONFIG_IEEE802154_AT86RF230=y
CONFIG_IEEE802154_MRF24J40=y
CONFIG_IEEE802154_CC2520=y
CONFIG_IEEE802154_ATUSB=y
CONFIG_IEEE802154_ADF7242=y
CONFIG_IEEE802154_CA8210=y
CONFIG_IEEE802154_CA8210_DEBUGFS=y
CONFIG_IEEE802154_MCR20A=y
CONFIG_IEEE802154_HWSIM=y
#
# Wireless WAN
#
CONFIG_WWAN=y
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=y
CONFIG_MHI_WWAN_CTRL=y
CONFIG_MHI_WWAN_MBIM=y
CONFIG_RPMSG_WWAN_CTRL=y
CONFIG_IOSM=y
CONFIG_MTK_T7XX=y
# end of Wireless WAN
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_VMXNET3=y
CONFIG_FUJITSU_ES=y
CONFIG_USB4_NET=y
CONFIG_HYPERV_NET=y
CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=y
CONFIG_MISDN_HFCMULTI=y
CONFIG_MISDN_HFCUSB=y
CONFIG_MISDN_AVMFRITZ=y
CONFIG_MISDN_SPEEDFAX=y
CONFIG_MISDN_INFINEON=y
CONFIG_MISDN_W6692=y
CONFIG_MISDN_NETJET=y
CONFIG_MISDN_HDLC=y
CONFIG_MISDN_IPAC=y
CONFIG_MISDN_ISAR=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_APPLESPI=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_DLINK_DIR685=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_PINEPHONE=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_IQS62X=y
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=y
CONFIG_KEYBOARD_MTK_PMIC=y
CONFIG_KEYBOARD_CYPRESS_SF=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADC=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_JOYSTICK_PSXPAD_SPI=y
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=y
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ADC=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_HYCON_HY46XX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_ILITEK=y
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MSG2638=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMAGIS=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUR40=y
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
CONFIG_TOUCHSCREEN_IQS5XX=y
CONFIG_TOUCHSCREEN_ZINITIX=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_ARIZONA_HAPTICS=y
CONFIG_INPUT_ATC260X_ONKEY=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX77650_ONKEY=y
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_CPCAP_PWRBUTTON=y
CONFIG_INPUT_ATLAS_BTNS=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_PWM_VIBRA=y
CONFIG_INPUT_RK805_PWRKEY=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_ADXL34X_SPI=y
CONFIG_INPUT_IBM_PANEL=y
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_IQS269A=y
CONFIG_INPUT_IQS626A=y
CONFIG_INPUT_IQS7222=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
CONFIG_INPUT_SOC_BUTTON_ARRAY=y
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_RAVE_SP_PWRBUTTON=y
CONFIG_INPUT_RT5120_PWRKEY=y
CONFIG_INPUT_STPMIC1_ONKEY=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SPI=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_HYPERV_KEYBOARD=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_MEN_MCB=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
CONFIG_SERIAL_LANTIQ=y
CONFIG_SERIAL_LANTIQ_CONSOLE=y
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_N_GSM=y
CONFIG_NOZOMI=y
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=y
CONFIG_IPWIRELESS=y
# end of PCMCIA character devices
CONFIG_MWAVE=y
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=y
CONFIG_UV_MMTIMER=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=y
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
CONFIG_TCG_XEN=y
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_TELCLOCK=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_PCIE=y
CONFIG_XILLYBUS_OF=y
CONFIG_XILLYUSB=y
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_AMD_MP2=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_CHT_WC=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_AMDPSP=y
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_CP2615=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PCI1XXXX=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
CONFIG_SVC_I3C_MASTER=y
CONFIG_MIPI_I3C_HCI=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
CONFIG_SPI_ALTERA_DFL=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_CADENCE_XSPI=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_PCI=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_DLN2=y
CONFIG_SPI_FSI=y
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_INTEL=y
CONFIG_SPI_INTEL_PCI=y
CONFIG_SPI_INTEL_PLATFORM=y
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_MICROCHIP_CORE=y
CONFIG_SPI_MICROCHIP_CORE_QSPI=y
CONFIG_SPI_LANTIQ_SSC=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_SIFIVE=y
CONFIG_SPI_MXIC=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_ZYNQMP_GQSPI=y
CONFIG_SPI_AMD=y
#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=y
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=y
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_DP83640_PHY=y
CONFIG_PTP_1588_CLOCK_INES=y
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PTP_1588_CLOCK_IDT82P33=y
CONFIG_PTP_1588_CLOCK_IDTCM=y
CONFIG_PTP_1588_CLOCK_VMW=y
CONFIG_PTP_1588_CLOCK_OCP=y
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_AXP209=y
CONFIG_PINCTRL_CY8C95X0=y
CONFIG_PINCTRL_DA9062=y
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08_SPI=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_LOCHNAGAR=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y
#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_LYNXPOINT=y
CONFIG_PINCTRL_MERRIFIELD=y
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_ALDERLAKE=y
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_CANNONLAKE=y
CONFIG_PINCTRL_CEDARFORK=y
CONFIG_PINCTRL_DENVERTON=y
CONFIG_PINCTRL_ELKHARTLAKE=y
CONFIG_PINCTRL_EMMITSBURG=y
CONFIG_PINCTRL_GEMINILAKE=y
CONFIG_PINCTRL_ICELAKE=y
CONFIG_PINCTRL_JASPERLAKE=y
CONFIG_PINCTRL_LAKEFIELD=y
CONFIG_PINCTRL_LEWISBURG=y
CONFIG_PINCTRL_METEORLAKE=y
CONFIG_PINCTRL_SUNRISEPOINT=y
CONFIG_PINCTRL_TIGERLAKE=y
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=y
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EXAR=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_WCD934X=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_I8255=y
CONFIG_GPIO_104_DIO_48E=y
CONFIG_GPIO_104_IDIO_16=y
CONFIG_GPIO_104_IDI_48=y
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=y
CONFIG_GPIO_IT87=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=y
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_BD71815=y
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TPS68470=y
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_UCB1400=y
CONFIG_GPIO_WHISKEY_COVE=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_MERRIFIELD=y
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=y
CONFIG_GPIO_SODAVILLE=y
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
CONFIG_GPIO_XRA1403=y
CONFIG_GPIO_MOXTET=y
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_ATC260X=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_IP5XXX_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CPCAP=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_WM97XX=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_CHARGER_DA9150=y
CONFIG_BATTERY_DA9150=y
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
CONFIG_AXP288_CHARGER=y
CONFIG_AXP288_FUEL_GAUGE=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_BATTERY_TWL4030_MADC=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_BATTERY_RX51=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77650=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_MP2629=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_MT6370=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_RK817=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_CROS_USBPD=y
CONFIG_CHARGER_CROS_PCHG=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
CONFIG_CHARGER_WILCO=y
CONFIG_RN5T618_POWER=y
CONFIG_BATTERY_SURFACE=y
CONFIG_CHARGER_SURFACE=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_CORSAIR_CPRO=y
CONFIG_SENSORS_CORSAIR_PSU=y
CONFIG_SENSORS_DRIVETEMP=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_I8K=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_GSC=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_FTSTEUTATES=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_I5500=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2947_SPI=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
CONFIG_SENSORS_MAX31730=y
CONFIG_SENSORS_MAX31760=y
CONFIG_SENSORS_MAX6620=y
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_MLXREG_FAN=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MENF21BMC_HWMON=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT6775_I2C=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_NZXT_KRAKEN2=y
CONFIG_SENSORS_NZXT_SMART2=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_PECI_CPUTEMP=y
CONFIG_SENSORS_PECI_DIMMTEMP=y
CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1266=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_BPA_RS600=y
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_DPS920AB=y
CONFIG_SENSORS_INSPUR_IPSPS=y
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR36021=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IR38064_REGULATOR=y
CONFIG_SENSORS_IRPS5401=y
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT7182S=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX15301=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX16601=y
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
CONFIG_SENSORS_PIM4328=y
CONFIG_SENSORS_PLI1209BC=y
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_TPS546D24=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE152=y
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC2305=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=y
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_XGENE=y
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=y
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_SENSORS_ASUS_WMI=y
CONFIG_SENSORS_ASUS_EC=y
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_FREQ_THERMAL=y
CONFIG_CPU_IDLE_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
CONFIG_MAX77620_THERMAL=y
CONFIG_DA9062_THERMAL=y
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=y
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
CONFIG_PROC_THERMAL_MMIO_RAPL=y
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_BXT_PMIC_THERMAL=y
CONFIG_INTEL_PCH_THERMAL=y
CONFIG_INTEL_TCC_COOLING=y
CONFIG_INTEL_MENLOW=y
CONFIG_INTEL_HFI_THERMAL=y
# end of Intel thermal drivers
# CONFIG_TI_SOC_THERMAL is not set
CONFIG_GENERIC_ADC_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD957XMUF_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
CONFIG_WDAT_WDT=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_MLX_WDT=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_RN5T618_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_RETU_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
CONFIG_ALIM7101_WDT=y
CONFIG_EBC_C384_WDT=y
CONFIG_EXAR_WDT=y
CONFIG_F71808E_WDT=y
CONFIG_SP5100_TCO=y
CONFIG_SBC_FITPC2_WATCHDOG=y
CONFIG_EUROTECH_WDT=y
CONFIG_IB700_WDT=y
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=y
CONFIG_INTEL_MID_WATCHDOG=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_KEMPLD_WDT=y
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
CONFIG_NV_TCO=y
CONFIG_60XX_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_TQMX86_WDT=y
CONFIG_VIA_WDT=y
CONFIG_W83627HF_WDT=y
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
CONFIG_INTEL_MEI_WDT=y
CONFIG_NI903X_WDT=y
CONFIG_NIC7018_WDT=y
CONFIG_SIEMENS_SIMATIC_IPC_WDT=y
CONFIG_MEN_A21_WDT=y
CONFIG_XEN_WDT=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_MADERA_SPI=y
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI6421_SPMI=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_BXTWC=y
CONFIG_INTEL_SOC_PMIC_CHTWC=y
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=y
CONFIG_INTEL_SOC_PMIC_MRFLD=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_MFD_INTEL_PMC_BXT=y
CONFIG_MFD_IQS62X=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77714=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_OCELOT=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
CONFIG_MFD_SY7636A=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RT5120=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
CONFIG_MFD_VX855=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_QCOM_PM8008=y
CONFIG_RAVE_SP_CORE=y
CONFIG_MFD_INTEL_M10_BMC=y
CONFIG_MFD_RSMU_I2C=y
CONFIG_MFD_RSMU_SPI=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_CPCAP=y
CONFIG_REGULATOR_CROS_EC=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI6421V600=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6331=y
CONFIG_REGULATOR_MT6332=y
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6370=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5120=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STPMIC1=y
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=y
CONFIG_IR_FINTEK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=y
CONFIG_IR_HIX5HD2=y
CONFIG_IR_IGORPLUGUSB=y
CONFIG_IR_IGUANA=y
CONFIG_IR_IMON=y
CONFIG_IR_IMON_RAW=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_PWM_TX=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SPI=y
CONFIG_IR_STREAMZAP=y
CONFIG_IR_TOY=y
CONFIG_IR_TTUSBIR=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_RC_LOOPBACK=y
CONFIG_RC_XBOX_DVD=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y
#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_CEC_CROS_EC=y
CONFIG_CEC_GPIO=y
CONFIG_CEC_SECO=y
CONFIG_CEC_SECO_RC=y
CONFIG_USB_PULSE8_CEC=y
CONFIG_USB_RAINSHADOW_CEC=y
# end of CEC support
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options
#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers'
#
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_GSPCA=y
CONFIG_USB_GSPCA_BENQ=y
CONFIG_USB_GSPCA_CONEX=y
CONFIG_USB_GSPCA_CPIA1=y
CONFIG_USB_GSPCA_DTCS033=y
CONFIG_USB_GSPCA_ETOMS=y
CONFIG_USB_GSPCA_FINEPIX=y
CONFIG_USB_GSPCA_JEILINJ=y
CONFIG_USB_GSPCA_JL2005BCD=y
CONFIG_USB_GSPCA_KINECT=y
CONFIG_USB_GSPCA_KONICA=y
CONFIG_USB_GSPCA_MARS=y
CONFIG_USB_GSPCA_MR97310A=y
CONFIG_USB_GSPCA_NW80X=y
CONFIG_USB_GSPCA_OV519=y
CONFIG_USB_GSPCA_OV534=y
CONFIG_USB_GSPCA_OV534_9=y
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7302=y
CONFIG_USB_GSPCA_PAC7311=y
CONFIG_USB_GSPCA_SE401=y
CONFIG_USB_GSPCA_SN9C2028=y
CONFIG_USB_GSPCA_SN9C20X=y
CONFIG_USB_GSPCA_SONIXB=y
CONFIG_USB_GSPCA_SONIXJ=y
CONFIG_USB_GSPCA_SPCA1528=y
CONFIG_USB_GSPCA_SPCA500=y
CONFIG_USB_GSPCA_SPCA501=y
CONFIG_USB_GSPCA_SPCA505=y
CONFIG_USB_GSPCA_SPCA506=y
CONFIG_USB_GSPCA_SPCA508=y
CONFIG_USB_GSPCA_SPCA561=y
CONFIG_USB_GSPCA_SQ905=y
CONFIG_USB_GSPCA_SQ905C=y
CONFIG_USB_GSPCA_SQ930X=y
CONFIG_USB_GSPCA_STK014=y
CONFIG_USB_GSPCA_STK1135=y
CONFIG_USB_GSPCA_STV0680=y
CONFIG_USB_GSPCA_SUNPLUS=y
CONFIG_USB_GSPCA_T613=y
CONFIG_USB_GSPCA_TOPRO=y
CONFIG_USB_GSPCA_TOUPTEK=y
CONFIG_USB_GSPCA_TV8532=y
CONFIG_USB_GSPCA_VC032X=y
CONFIG_USB_GSPCA_VICAM=y
CONFIG_USB_GSPCA_XIRLINK_CIT=y
CONFIG_USB_GSPCA_ZC3XX=y
CONFIG_USB_GL860=y
CONFIG_USB_M5602=y
CONFIG_USB_STV06XX=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=y
CONFIG_VIDEO_USBTV=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=y
CONFIG_VIDEO_GO7007_USB=y
CONFIG_VIDEO_GO7007_LOADER=y
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=y
CONFIG_VIDEO_HDPVR=y
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160=y
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=y
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=y
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=y
CONFIG_VIDEO_CX231XX_DVB=y
#
# Digital TV USB devices
#
CONFIG_DVB_AS102=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_USB_V2=y
CONFIG_DVB_USB_AF9015=y
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_AZ6007=y
CONFIG_DVB_USB_CE6230=y
CONFIG_DVB_USB_DVBSKY=y
CONFIG_DVB_USB_EC168=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_LME2510=y
CONFIG_DVB_USB_MXL111SF=y
CONFIG_DVB_USB_RTL28XXU=y
CONFIG_DVB_USB_ZD1301=y
CONFIG_DVB_USB=y
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=y
CONFIG_DVB_USB_AF9005=y
CONFIG_DVB_USB_AF9005_REMOTE=y
CONFIG_DVB_USB_AZ6027=y
CONFIG_DVB_USB_CINERGY_T2=y
CONFIG_DVB_USB_CXUSB=y
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_DIB0700=y
CONFIG_DVB_USB_DIB3000MC=y
CONFIG_DVB_USB_DIBUSB_MB=y
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=y
CONFIG_DVB_USB_DIGITV=y
CONFIG_DVB_USB_DTT200U=y
CONFIG_DVB_USB_DTV5100=y
CONFIG_DVB_USB_DW2102=y
CONFIG_DVB_USB_GP8PSK=y
CONFIG_DVB_USB_M920X=y
CONFIG_DVB_USB_NOVA_T_USB2=y
CONFIG_DVB_USB_OPERA1=y
CONFIG_DVB_USB_PCTV452E=y
CONFIG_DVB_USB_TECHNISAT_USB2=y
CONFIG_DVB_USB_TTUSB2=y
CONFIG_DVB_USB_UMT_010=y
CONFIG_DVB_USB_VP702X=y
CONFIG_DVB_USB_VP7045=y
CONFIG_SMS_USB_DRV=y
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_V4L2=y
CONFIG_VIDEO_EM28XX_ALSA=y
CONFIG_VIDEO_EM28XX_DVB=y
CONFIG_VIDEO_EM28XX_RC=y
#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=y
CONFIG_USB_HACKRF=y
CONFIG_USB_MSI2500=y
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=y
CONFIG_VIDEO_TW5864=y
CONFIG_VIDEO_TW68=y
CONFIG_VIDEO_TW686X=y
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_DC30=y
CONFIG_VIDEO_ZORAN_ZR36060=y
CONFIG_VIDEO_ZORAN_BUZ=y
CONFIG_VIDEO_ZORAN_DC10=y
CONFIG_VIDEO_ZORAN_LML33=y
CONFIG_VIDEO_ZORAN_LML33R10=y
CONFIG_VIDEO_ZORAN_AVS6EYES=y
#
# Media capture/analog TV support
#
CONFIG_VIDEO_DT3155=y
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_IVTV_ALSA=y
CONFIG_VIDEO_FB_IVTV=y
CONFIG_VIDEO_FB_IVTV_FORCE_PAT=y
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=y
CONFIG_DVB_BT8XX=y
CONFIG_VIDEO_CX18=y
CONFIG_VIDEO_CX18_ALSA=y
CONFIG_VIDEO_CX23885=y
CONFIG_MEDIA_ALTERA_CI=y
CONFIG_VIDEO_CX25821=y
CONFIG_VIDEO_CX25821_ALSA=y
CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_ALSA=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_DVB=y
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=y
CONFIG_VIDEO_CX88_MPEG=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_ALSA=y
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=y
CONFIG_VIDEO_SAA7134_GO7007=y
CONFIG_VIDEO_SAA7164=y
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_DDBRIDGE=y
CONFIG_DVB_DDBRIDGE_MSIENABLE=y
CONFIG_DVB_DM1105=y
CONFIG_MANTIS_CORE=y
CONFIG_DVB_MANTIS=y
CONFIG_DVB_HOPPER=y
CONFIG_DVB_NETUP_UNIDVB=y
CONFIG_DVB_NGENE=y
CONFIG_DVB_PLUTO2=y
CONFIG_DVB_PT1=y
CONFIG_DVB_PT3=y
CONFIG_DVB_SMIPCIE=y
CONFIG_VIDEO_PCI_SKELETON=y
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRIDGE=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_SHARK=y
CONFIG_RADIO_SHARK2=y
CONFIG_RADIO_SI4713=y
CONFIG_RADIO_SI476X=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_WL1273=y
CONFIG_USB_DSBR=y
CONFIG_USB_KEENE=y
CONFIG_USB_MA901=y
CONFIG_USB_MR800=y
CONFIG_USB_RAREMONO=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_I2C_SI470X=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
CONFIG_RADIO_WL128X=y
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_VIDEO_MUX=y
#
# Allegro DVT media platform drivers
#
#
# Amlogic media platform drivers
#
#
# Amphion drivers
#
#
# Aspeed media platform drivers
#
CONFIG_VIDEO_ASPEED=y
#
# Atmel media platform drivers
#
#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=y
CONFIG_VIDEO_CADENCE_CSI2TX=y
#
# Chips&Media media platform drivers
#
#
# Intel media platform drivers
#
#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=y
#
# Mediatek media platform drivers
#
#
# NVidia media platform drivers
#
#
# NXP media platform drivers
#
#
# Qualcomm media platform drivers
#
#
# Renesas media platform drivers
#
#
# Rockchip media platform drivers
#
#
# Samsung media platform drivers
#
#
# STMicroelectronics media platform drivers
#
#
# Sunxi media platform drivers
#
#
# Texas Instruments drivers
#
#
# Verisilicon media platform drivers
#
#
# VIA media platform drivers
#
CONFIG_VIDEO_VIA_CAMERA=y
#
# Xilinx media platform drivers
#
CONFIG_VIDEO_XILINX=y
CONFIG_VIDEO_XILINX_CSI2RXSS=y
CONFIG_VIDEO_XILINX_TPG=y
CONFIG_VIDEO_XILINX_VTC=y
#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=y
CONFIG_VIDEO_VICODEC=y
CONFIG_VIDEO_VIMC=y
CONFIG_VIDEO_VIVID=y
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=y
#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_TTPCI_EEPROM=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_SIANO_DEBUGFS=y
CONFIG_VIDEO_V4L2_TPG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=y
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=y
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_CCS_PLL=y
CONFIG_VIDEO_AR0521=y
CONFIG_VIDEO_HI556=y
CONFIG_VIDEO_HI846=y
CONFIG_VIDEO_HI847=y
CONFIG_VIDEO_IMX208=y
CONFIG_VIDEO_IMX214=y
CONFIG_VIDEO_IMX219=y
CONFIG_VIDEO_IMX258=y
CONFIG_VIDEO_IMX274=y
CONFIG_VIDEO_IMX290=y
CONFIG_VIDEO_IMX319=y
CONFIG_VIDEO_IMX334=y
CONFIG_VIDEO_IMX335=y
CONFIG_VIDEO_IMX355=y
CONFIG_VIDEO_IMX412=y
CONFIG_VIDEO_MAX9271_LIB=y
CONFIG_VIDEO_MT9M001=y
CONFIG_VIDEO_MT9M032=y
CONFIG_VIDEO_MT9M111=y
CONFIG_VIDEO_MT9P031=y
CONFIG_VIDEO_MT9T001=y
CONFIG_VIDEO_MT9T112=y
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_MT9V032=y
CONFIG_VIDEO_MT9V111=y
CONFIG_VIDEO_NOON010PC30=y
CONFIG_VIDEO_OG01A1B=y
CONFIG_VIDEO_OV02A10=y
CONFIG_VIDEO_OV08D10=y
CONFIG_VIDEO_OV13858=y
CONFIG_VIDEO_OV13B10=y
CONFIG_VIDEO_OV2640=y
CONFIG_VIDEO_OV2659=y
CONFIG_VIDEO_OV2680=y
CONFIG_VIDEO_OV2685=y
CONFIG_VIDEO_OV2740=y
CONFIG_VIDEO_OV5640=y
CONFIG_VIDEO_OV5645=y
CONFIG_VIDEO_OV5647=y
CONFIG_VIDEO_OV5648=y
CONFIG_VIDEO_OV5670=y
CONFIG_VIDEO_OV5675=y
CONFIG_VIDEO_OV5693=y
CONFIG_VIDEO_OV5695=y
CONFIG_VIDEO_OV6650=y
CONFIG_VIDEO_OV7251=y
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV772X=y
CONFIG_VIDEO_OV7740=y
CONFIG_VIDEO_OV8856=y
CONFIG_VIDEO_OV8865=y
CONFIG_VIDEO_OV9282=y
CONFIG_VIDEO_OV9640=y
CONFIG_VIDEO_OV9650=y
CONFIG_VIDEO_OV9734=y
CONFIG_VIDEO_RDACM20=y
CONFIG_VIDEO_RDACM21=y
CONFIG_VIDEO_RJ54N1=y
CONFIG_VIDEO_S5C73M3=y
CONFIG_VIDEO_S5K4ECGX=y
CONFIG_VIDEO_S5K5BAF=y
CONFIG_VIDEO_S5K6A3=y
CONFIG_VIDEO_S5K6AA=y
CONFIG_VIDEO_SR030PC30=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_CCS=y
CONFIG_VIDEO_ET8EK8=y
CONFIG_VIDEO_M5MOLS=y
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
CONFIG_VIDEO_AK7375=y
CONFIG_VIDEO_DW9714=y
CONFIG_VIDEO_DW9768=y
CONFIG_VIDEO_DW9807_VCM=y
# end of Lens drivers
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=y
CONFIG_VIDEO_LM3560=y
CONFIG_VIDEO_LM3646=y
# end of Flash devices
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_SONY_BTF_MPX=y
CONFIG_VIDEO_TDA1997X=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
# end of RDS decoders
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_ADV748X=y
CONFIG_VIDEO_ADV7604=y
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=y
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_ISL7998X=y
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_MAX9286=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TC358743=y
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
CONFIG_VIDEO_TW2804=y
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
CONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
# end of Video decoders
#
# Video encoders
#
CONFIG_VIDEO_AD9389B=y
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_AK881X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_THS8200=y
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
# end of Video improvement chips
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_ST_MIPID02=y
CONFIG_VIDEO_THS7303=y
# end of Miscellaneous helper chips
#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=y
CONFIG_VIDEO_GS1662=y
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_M88RS6000T=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MSI001=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=y
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_STV6111=y
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_MN88472=y
CONFIG_DVB_MN88473=y
CONFIG_DVB_SI2165=y
CONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_TDA10071=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA8261=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_TUA6100=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_ZL10036=y
CONFIG_DVB_ZL10039=y
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
CONFIG_DVB_AS102_FE=y
CONFIG_DVB_CX22700=y
CONFIG_DVB_CX22702=y
CONFIG_DVB_CXD2820R=y
CONFIG_DVB_CXD2841ER=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_EC100=y
CONFIG_DVB_GP8PSK_FE=y
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_RTL2832_SDR=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_STV0367=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_ZD1301_DEMOD=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_CXD2880=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
CONFIG_DVB_VES1820=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LGDT3306A=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_MXL692=y
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=y
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=y
CONFIG_DVB_TC90522=y
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=y
#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=y
CONFIG_DVB_AF9033=y
CONFIG_DVB_ASCOT2E=y
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_HELENE=y
CONFIG_DVB_HORUS3A=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
CONFIG_DVB_M88RS2000=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_DRX39XYJ=y
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=y
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DBI=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_USE_DYNAMIC_DEBUG=y
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_BUDDY=y
CONFIG_DRM_VRAM_HELPER=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips
#
# ARM devices
#
CONFIG_DRM_KOMEDA=y
# end of ARM devices
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=y
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_DCN=y
CONFIG_DRM_AMD_DC_HDCP=y
CONFIG_DRM_AMD_DC_SI=y
CONFIG_DEBUG_KERNEL_DC=y
CONFIG_DRM_AMD_SECURE_DISPLAY=y
# end of Display Engine Configuration
CONFIG_HSA_AMD=y
CONFIG_HSA_AMD_SVM=y
CONFIG_HSA_AMD_P2P=y
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_NOUVEAU_DEBUG_MMU=y
CONFIG_NOUVEAU_DEBUG_PUSH=y
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_SVM=y
CONFIG_DRM_I915=y
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
CONFIG_DRM_I915_GVT_KVMGT=y
CONFIG_DRM_I915_PXP=y
#
# drm/i915 Debugging
#
CONFIG_DRM_I915_WERROR=y
# CONFIG_DRM_I915_DEBUG is not set
CONFIG_DRM_I915_DEBUG_MMIO=y
# CONFIG_DRM_I915_DEBUG_GEM is not set
CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=y
CONFIG_DRM_I915_SW_FENCE_CHECK_DAG=y
CONFIG_DRM_I915_DEBUG_GUC=y
CONFIG_DRM_I915_SELFTEST=y
CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS=y
CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=y
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y
# end of drm/i915 Debugging
#
# drm/i915 Profile Guided Optimisation
#
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# end of drm/i915 Profile Guided Optimisation
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_VMWGFX_MKSSTATS=y
CONFIG_DRM_GMA500=y
CONFIG_DRM_UDL=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_RCAR_DW_HDMI=y
CONFIG_DRM_RCAR_USE_LVDS=y
CONFIG_DRM_RCAR_MIPI_DSI=y
CONFIG_DRM_QXL=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_ABT_Y030XX067A=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_EDP=y
CONFIG_DRM_PANEL_EBBG_FT8719=y
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_IL9322=y
CONFIG_DRM_PANEL_ILITEK_ILI9341=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_EJ030NA=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
CONFIG_DRM_PANEL_LG_LB035Q02=y
CONFIG_DRM_PANEL_LG_LG4573=y
CONFIG_DRM_PANEL_NEC_NL8048HL11=y
CONFIG_DRM_PANEL_NEWVISION_NV3052C=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
CONFIG_DRM_PANEL_NOVATEK_NT39016=y
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y
CONFIG_DRM_PANEL_SAMSUNG_DB7430=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=y
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
CONFIG_DRM_PANEL_SITRONIX_ST7789V=y
CONFIG_DRM_PANEL_SONY_ACX565AKM=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
CONFIG_DRM_PANEL_TPO_TD028TTEC1=y
CONFIG_DRM_PANEL_TPO_TD043MTEA1=y
CONFIG_DRM_PANEL_TPO_TPG110=y
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=y
CONFIG_DRM_CROS_EC_ANX7688=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_ITE_IT6505=y
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9211=y
CONFIG_DRM_LONTIUM_LT9611=y
CONFIG_DRM_LONTIUM_LT9611UXC=y
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_PARADE_PS8640=y
CONFIG_DRM_SIL_SII8620=y
CONFIG_DRM_SII902X=y
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=y
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_DLPC3433=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI83=y
CONFIG_DRM_TI_SN65DSI86=y
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=y
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7511_CEC=y
CONFIG_DRM_CDNS_MHDP8546=y
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=y
CONFIG_DRM_DW_HDMI_I2S_AUDIO=y
CONFIG_DRM_DW_HDMI_GP_AUDIO=y
CONFIG_DRM_DW_HDMI_CEC=y
# end of Display Interface Bridges
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_IMX_LCDIF=y
CONFIG_DRM_ARCPGU=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_GM12U320=y
CONFIG_DRM_PANEL_MIPI_DBI=y
CONFIG_DRM_SIMPLEDRM=y
CONFIG_TINYDRM_HX8357D=y
CONFIG_TINYDRM_ILI9163=y
CONFIG_TINYDRM_ILI9225=y
CONFIG_TINYDRM_ILI9341=y
CONFIG_TINYDRM_ILI9486=y
CONFIG_TINYDRM_MI0283QT=y
CONFIG_TINYDRM_REPAPER=y
CONFIG_TINYDRM_ST7586=y
CONFIG_TINYDRM_ST7735R=y
CONFIG_DRM_XEN=y
CONFIG_DRM_XEN_FRONTEND=y
CONFIG_DRM_VBOXVIDEO=y
CONFIG_DRM_GUD=y
CONFIG_DRM_SSD130X=y
CONFIG_DRM_SSD130X_I2C=y
CONFIG_DRM_SSD130X_SPI=y
CONFIG_DRM_HYPERV=y
CONFIG_DRM_LEGACY=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y
CONFIG_DRM_PRIVACY_SCREEN=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
CONFIG_FB_UVESA=y
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=y
CONFIG_FB_VIRTUAL=y
CONFIG_XEN_FBDEV_FRONTEND=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_HYPERV=y
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_AMS369FG06=y
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_LCD_OTM3225A=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_MT6370=y
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=y
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_CTL_DEBUG=y
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_CTL_LED=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_MIDI_EMUL=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_SERIAL_GENERIC=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=y
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ALS300=y
CONFIG_SND_ALS4000=y
CONFIG_SND_ALI5451=y
CONFIG_SND_ASIHPI=y
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_AZT3328=y
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=y
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_INDIGOIOX=y
CONFIG_SND_INDIGODJX=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1_SEQ=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=y
#
# Don't forget to add built-in firmwares for HDSP driver
#
CONFIG_SND_HDSPM=y
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_LOLA=y
CONFIG_SND_LX6464ES=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=y
CONFIG_SND_NM256=y
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_SONICVIBES=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
CONFIG_SND_VX222=y
CONFIG_SND_YMFPCI=y
#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_SCODEC_CS35L41=y
CONFIG_SND_HDA_CS_DSP_CONTROLS=y
CONFIG_SND_HDA_SCODEC_CS35L41_I2C=y
CONFIG_SND_HDA_SCODEC_CS35L41_SPI=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CS8409=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y
# end of HD-Audio
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=y
CONFIG_SND_INTEL_BYT_PREFER_SOF=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=y
CONFIG_SND_USB_6FIRE=y
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=y
CONFIG_SND_DICE=y
CONFIG_SND_OXFW=y
CONFIG_SND_ISIGHT=y
CONFIG_SND_FIREWORKS=y
CONFIG_SND_BEBOB=y
CONFIG_SND_FIREWIRE_DIGI00X=y
CONFIG_SND_FIREWIRE_TASCAM=y
CONFIG_SND_FIREWIRE_MOTU=y
CONFIG_SND_FIREFACE=y
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_TOPOLOGY_KUNIT_TEST=y
CONFIG_SND_SOC_UTILS_KUNIT_TEST=y
CONFIG_SND_SOC_ACPI=y
CONFIG_SND_SOC_ADI=y
CONFIG_SND_SOC_ADI_AXI_I2S=y
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
CONFIG_SND_SOC_AMD_ACP=y
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=y
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y
CONFIG_SND_SOC_AMD_ST_ES8336_MACH=y
CONFIG_SND_SOC_AMD_ACP3x=y
CONFIG_SND_SOC_AMD_RV_RT5682_MACH=y
CONFIG_SND_SOC_AMD_RENOIR=y
CONFIG_SND_SOC_AMD_RENOIR_MACH=y
CONFIG_SND_SOC_AMD_ACP5x=y
CONFIG_SND_SOC_AMD_VANGOGH_MACH=y
CONFIG_SND_SOC_AMD_ACP6x=y
CONFIG_SND_SOC_AMD_YC_MACH=y
CONFIG_SND_AMD_ACP_CONFIG=y
CONFIG_SND_SOC_AMD_ACP_COMMON=y
CONFIG_SND_SOC_AMD_ACP_PDM=y
CONFIG_SND_SOC_AMD_ACP_I2S=y
CONFIG_SND_SOC_AMD_ACP_PCM=y
CONFIG_SND_SOC_AMD_ACP_PCI=y
CONFIG_SND_AMD_ASOC_RENOIR=y
CONFIG_SND_AMD_ASOC_REMBRANDT=y
CONFIG_SND_SOC_AMD_MACH_COMMON=y
CONFIG_SND_SOC_AMD_LEGACY_MACH=y
CONFIG_SND_SOC_AMD_SOF_MACH=y
CONFIG_SND_SOC_AMD_RPL_ACP6x=y
CONFIG_SND_SOC_AMD_PS=y
CONFIG_SND_SOC_AMD_PS_MACH=y
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_SOC_MIKROE_PROTO=y
CONFIG_SND_BCM63XX_I2S_WHISTLER=y
CONFIG_SND_DESIGNWARE_I2S=y
CONFIG_SND_DESIGNWARE_PCM=y
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_MQS=y
CONFIG_SND_SOC_FSL_AUDMIX=y
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_FSL_EASRC=y
CONFIG_SND_SOC_FSL_XCVR=y
CONFIG_SND_SOC_FSL_UTILS=y
CONFIG_SND_SOC_FSL_RPMSG=y
CONFIG_SND_SOC_IMX_AUDMUX=y
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
CONFIG_SND_SOC_IMG_I2S_OUT=y
CONFIG_SND_SOC_IMG_PARALLEL_OUT=y
CONFIG_SND_SOC_IMG_SPDIF_IN=y
CONFIG_SND_SOC_IMG_SPDIF_OUT=y
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_INTEL_SST=y
CONFIG_SND_SOC_INTEL_CATPT=y
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=y
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=y
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=y
CONFIG_SND_SOC_INTEL_SKYLAKE=y
CONFIG_SND_SOC_INTEL_SKL=y
CONFIG_SND_SOC_INTEL_APL=y
CONFIG_SND_SOC_INTEL_KBL=y
CONFIG_SND_SOC_INTEL_GLK=y
CONFIG_SND_SOC_INTEL_CNL=y
CONFIG_SND_SOC_INTEL_CFL=y
CONFIG_SND_SOC_INTEL_CML_H=y
CONFIG_SND_SOC_INTEL_CML_LP=y
CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=y
CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=y
CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y
CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=y
CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
CONFIG_SND_SOC_INTEL_AVS=y
#
# Intel AVS Machine drivers
#
#
# Available DSP configurations
#
CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219=y
CONFIG_SND_SOC_INTEL_AVS_MACH_DMIC=y
CONFIG_SND_SOC_INTEL_AVS_MACH_HDAUDIO=y
CONFIG_SND_SOC_INTEL_AVS_MACH_I2S_TEST=y
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98357A=y
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98373=y
CONFIG_SND_SOC_INTEL_AVS_MACH_NAU8825=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT274=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT286=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT298=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682=y
CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567=y
# end of Intel AVS Machine drivers
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_INTEL_HDA_DSP_COMMON=y
CONFIG_SND_SOC_INTEL_SOF_MAXIM_COMMON=y
CONFIG_SND_SOC_INTEL_SOF_REALTEK_COMMON=y
CONFIG_SND_SOC_INTEL_HASWELL_MACH=y
CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=y
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=y
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_WM5102_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=y
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=y
CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=y
CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=y
CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=y
CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=y
CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=y
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=y
CONFIG_SND_SOC_SOF_PCI=y
CONFIG_SND_SOC_SOF_ACPI=y
CONFIG_SND_SOC_SOF_ACPI_DEV=y
CONFIG_SND_SOC_SOF_OF=y
CONFIG_SND_SOC_SOF_DEBUG_PROBES=y
CONFIG_SND_SOC_SOF_CLIENT=y
CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT=y
CONFIG_SND_SOC_SOF_FORCE_PROBE_WORKQUEUE=y
CONFIG_SND_SOC_SOF_NOCODEC=y
CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT=y
CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS=y
CONFIG_SND_SOC_SOF_DEBUG=y
CONFIG_SND_SOC_SOF_FORCE_NOCODEC_MODE=y
CONFIG_SND_SOC_SOF_DEBUG_XRUN_STOP=y
CONFIG_SND_SOC_SOF_DEBUG_VERBOSE_IPC=y
CONFIG_SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST_NUM=2
CONFIG_SND_SOC_SOF_DEBUG_IPC_MSG_INJECTOR=y
CONFIG_SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT=y
CONFIG_SND_SOC_SOF=y
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_INTEL_IPC4=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=y
CONFIG_SND_SOC_SOF_AMD_COMMON=y
CONFIG_SND_SOC_SOF_AMD_RENOIR=y
CONFIG_SND_SOC_SOF_AMD_REMBRANDT=y
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=y
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=y
CONFIG_SND_SOC_SOF_INTEL_COMMON=y
CONFIG_SND_SOC_SOF_BAYTRAIL=y
CONFIG_SND_SOC_SOF_BROADWELL=y
CONFIG_SND_SOC_SOF_MERRIFIELD=y
CONFIG_SND_SOC_SOF_INTEL_SKL=y
CONFIG_SND_SOC_SOF_SKYLAKE=y
CONFIG_SND_SOC_SOF_KABYLAKE=y
CONFIG_SND_SOC_SOF_INTEL_APL=y
CONFIG_SND_SOC_SOF_APOLLOLAKE=y
CONFIG_SND_SOC_SOF_GEMINILAKE=y
CONFIG_SND_SOC_SOF_INTEL_CNL=y
CONFIG_SND_SOC_SOF_CANNONLAKE=y
CONFIG_SND_SOC_SOF_COFFEELAKE=y
CONFIG_SND_SOC_SOF_COMETLAKE=y
CONFIG_SND_SOC_SOF_INTEL_ICL=y
CONFIG_SND_SOC_SOF_ICELAKE=y
CONFIG_SND_SOC_SOF_JASPERLAKE=y
CONFIG_SND_SOC_SOF_INTEL_TGL=y
CONFIG_SND_SOC_SOF_TIGERLAKE=y
CONFIG_SND_SOC_SOF_ELKHARTLAKE=y
CONFIG_SND_SOC_SOF_ALDERLAKE=y
CONFIG_SND_SOC_SOF_INTEL_MTL=y
CONFIG_SND_SOC_SOF_METEORLAKE=y
CONFIG_SND_SOC_SOF_HDA_COMMON=y
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=y
CONFIG_SND_SOC_SOF_HDA_PROBES=y
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=y
CONFIG_SND_SOC_SOF_XTENSA=y
#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support
CONFIG_SND_SOC_XILINX_I2S=y
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
CONFIG_SND_SOC_ARIZONA=y
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1372_SPI=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU1761_SPI=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_ADAU7118=y
CONFIG_SND_SOC_ADAU7118_HW=y
CONFIG_SND_SOC_ADAU7118_I2C=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4375=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4554=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_AW8738=y
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CPCAP=y
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=y
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=y
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_SPI=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS35L45_TABLES=y
CONFIG_SND_SOC_CS35L45=y
CONFIG_SND_SOC_CS35L45_SPI=y
CONFIG_SND_SOC_CS35L45_I2C=y
CONFIG_SND_SOC_CS42L42_CORE=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS42L83=y
CONFIG_SND_SOC_CS4234=y
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS4271_SPI=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX2072X=y
CONFIG_SND_SOC_DA7213=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8326=y
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
CONFIG_SND_SOC_ES8328_SPI=y
CONFIG_SND_SOC_GTM601=y
CONFIG_SND_SOC_HDAC_HDMI=y
CONFIG_SND_SOC_HDAC_HDA=y
CONFIG_SND_SOC_HDA=y
CONFIG_SND_SOC_ICS43432=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_LOCHNAGAR_SC=y
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98520=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
CONFIG_SND_SOC_MAX98373_SDW=y
CONFIG_SND_SOC_MAX98390=y
CONFIG_SND_SOC_MAX98396=y
CONFIG_SND_SOC_MAX9860=y
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM186X_SPI=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3060_SPI=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM5102A=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_PCM512x_SPI=y
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RK817=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RL6347A=y
CONFIG_SND_SOC_RT274=y
CONFIG_SND_SOC_RT286=y
CONFIG_SND_SOC_RT298=y
CONFIG_SND_SOC_RT1011=y
CONFIG_SND_SOC_RT1015=y
CONFIG_SND_SOC_RT1015P=y
CONFIG_SND_SOC_RT1019=y
CONFIG_SND_SOC_RT1308=y
CONFIG_SND_SOC_RT1308_SDW=y
CONFIG_SND_SOC_RT1316_SDW=y
CONFIG_SND_SOC_RT5514=y
CONFIG_SND_SOC_RT5514_SPI=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_RT5651=y
CONFIG_SND_SOC_RT5659=y
CONFIG_SND_SOC_RT5660=y
CONFIG_SND_SOC_RT5663=y
CONFIG_SND_SOC_RT5670=y
CONFIG_SND_SOC_RT5677=y
CONFIG_SND_SOC_RT5677_SPI=y
CONFIG_SND_SOC_RT5682=y
CONFIG_SND_SOC_RT5682_I2C=y
CONFIG_SND_SOC_RT5682_SDW=y
CONFIG_SND_SOC_RT5682S=y
CONFIG_SND_SOC_RT700=y
CONFIG_SND_SOC_RT700_SDW=y
CONFIG_SND_SOC_RT711=y
CONFIG_SND_SOC_RT711_SDW=y
CONFIG_SND_SOC_RT711_SDCA_SDW=y
CONFIG_SND_SOC_RT715=y
CONFIG_SND_SOC_RT715_SDW=y
CONFIG_SND_SOC_RT715_SDCA_SDW=y
CONFIG_SND_SOC_RT9120=y
CONFIG_SND_SOC_SDW_MOCKUP=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SI476X=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIMPLE_MUX=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SRC4XXX_I2C=y
CONFIG_SND_SOC_SRC4XXX=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2518=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
CONFIG_SND_SOC_TAS2562=y
CONFIG_SND_SOC_TAS2764=y
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS2780=y
CONFIG_SND_SOC_TAS5086=y
CONFIG_SND_SOC_TAS571X=y
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS5805M=y
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
CONFIG_SND_SOC_TLV320ADC3XXX=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
CONFIG_SND_SOC_TLV320AIC32X4_SPI=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TLV320AIC3X_I2C=y
CONFIG_SND_SOC_TLV320AIC3X_SPI=y
CONFIG_SND_SOC_TLV320ADCX140=y
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_UDA1334=y
CONFIG_SND_SOC_WCD9335=y
CONFIG_SND_SOC_WCD_MBHC=y
CONFIG_SND_SOC_WCD934X=y
CONFIG_SND_SOC_WCD938X=y
CONFIG_SND_SOC_WCD938X_SDW=y
CONFIG_SND_SOC_WM5102=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8731_I2C=y
CONFIG_SND_SOC_WM8731_SPI=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8770=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8804_SPI=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8940=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_WSA881X=y
CONFIG_SND_SOC_WSA883X=y
CONFIG_SND_SOC_ZL38060=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MT6351=y
CONFIG_SND_SOC_MT6358=y
CONFIG_SND_SOC_MT6660=y
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8821=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_NAU8825=y
CONFIG_SND_SOC_TPA6130A2=y
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
CONFIG_SND_SOC_LPASS_WSA_MACRO=y
CONFIG_SND_SOC_LPASS_VA_MACRO=y
CONFIG_SND_SOC_LPASS_RX_MACRO=y
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=y
CONFIG_SND_TEST_COMPONENT=y
CONFIG_SND_X86=y
CONFIG_HDMI_LPE_AUDIO=y
CONFIG_SND_SYNTH_EMUX=y
CONFIG_SND_XEN_FRONTEND=y
CONFIG_SND_VIRTIO=y
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACCUTOUCH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BETOP_FF=y
CONFIG_HID_BIGBEN_FF=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=y
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CMEDIA=y
CONFIG_HID_CP2112=y
CONFIG_HID_CREATIVE_SB0540=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
CONFIG_HID_FT260=y
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=y
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_GOOGLE_HAMMER=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_VRC2=y
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LETSKETCH=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_HID_LOGITECH_HIDPP=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_MEGAWORLD_FF=y
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_PXRC=y
CONFIG_HID_RAZER=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SEMITEK=y
CONFIG_HID_SIGMAMICRO=y
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_TOPRE=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_U2FZERO=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
CONFIG_HID_MCP2221=y
CONFIG_HID_KUNIT_TEST=y
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID_ACPI=y
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support
CONFIG_I2C_HID_CORE=y
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=y
CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER=y
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
CONFIG_AMD_SFH_HID=y
# end of AMD SFH HID Support
#
# Surface System Aggregator Module HID support
#
CONFIG_SURFACE_HID=y
CONFIG_SURFACE_KBD=y
# end of Surface System Aggregator Module HID support
CONFIG_SURFACE_HID_CORE=y
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_FEW_INIT_RETRIES=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_OTG_FSM=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_XEN_HCD=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
CONFIG_USBIP_CORE=y
CONFIG_USBIP_VHCI_HCD=y
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=y
CONFIG_USBIP_VUDC=y
CONFIG_USBIP_DEBUG=y
CONFIG_USB_CDNS_SUPPORT=y
CONFIG_USB_CDNS_HOST=y
CONFIG_USB_CDNS3=y
CONFIG_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_PCI_WRAP=y
CONFIG_USB_CDNSP_PCI=y
CONFIG_USB_CDNSP_GADGET=y
CONFIG_USB_CDNSP_HOST=y
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
CONFIG_USB_DWC3_HAPS=y
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_DWC2_PCI=y
CONFIG_USB_DWC2_DEBUG=y
CONFIG_USB_DWC2_VERBOSE=y
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_DWC2_DEBUG_PERIODIC=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_PCI=y
CONFIG_USB_CHIPIDEA_MSM=y
CONFIG_USB_CHIPIDEA_IMX=y
CONFIG_USB_CHIPIDEA_GENERIC=y
CONFIG_USB_CHIPIDEA_TEGRA=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_UPD78F0730=y
CONFIG_USB_SERIAL_XR=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_APPLE_MFI_FASTCHARGE=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
CONFIG_USB_CHAOSKEY=y
CONFIG_USB_ONBOARD_HUB=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
CONFIG_USB_MV_U3D=y
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y
CONFIG_USB_AMD5536UDC=y
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=y
CONFIG_USB_GOKU=y
CONFIG_USB_EG20T=y
CONFIG_USB_GADGET_XILINX=y
CONFIG_USB_MAX3420_UDC=y
CONFIG_USB_DUMMY_HCD=y
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_F_SS_LB=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_U_AUDIO=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_NCM=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_PHONET=y
CONFIG_USB_F_EEM=y
CONFIG_USB_F_SUBSET=y
CONFIG_USB_F_RNDIS=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1=y
CONFIG_USB_F_UAC1_LEGACY=y
CONFIG_USB_F_UAC2=y
CONFIG_USB_F_UVC=y
CONFIG_USB_F_MIDI=y
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_F_TCM=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y
#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=y
CONFIG_USB_ZERO_HNPTEST=y
CONFIG_USB_AUDIO=y
CONFIG_GADGET_UAC1=y
CONFIG_GADGET_UAC1_LEGACY=y
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=y
CONFIG_USB_GADGETFS=y
CONFIG_USB_FUNCTIONFS=y
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=y
CONFIG_USB_GADGET_TARGET=y
CONFIG_USB_G_SERIAL=y
CONFIG_USB_MIDI_GADGET=y
CONFIG_USB_G_PRINTER=y
CONFIG_USB_CDC_COMPOSITE=y
CONFIG_USB_G_NOKIA=y
CONFIG_USB_G_ACM_MS=y
CONFIG_USB_G_MULTI=y
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=y
CONFIG_USB_G_DBGP=y
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=y
CONFIG_USB_RAW_GADGET=y
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_RT1711H=y
CONFIG_TYPEC_MT6360=y
CONFIG_TYPEC_TCPCI_MT6370=y
CONFIG_TYPEC_TCPCI_MAXIM=y
CONFIG_TYPEC_FUSB302=y
CONFIG_TYPEC_WCOVE=y
CONFIG_TYPEC_UCSI=y
CONFIG_UCSI_CCG=y
CONFIG_UCSI_ACPI=y
CONFIG_UCSI_STM32G0=y
CONFIG_TYPEC_TPS6598X=y
CONFIG_TYPEC_ANX7411=y
CONFIG_TYPEC_RT1719=y
CONFIG_TYPEC_HD3SS3220=y
CONFIG_TYPEC_STUSB160X=y
CONFIG_TYPEC_WUSB3801=y
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=y
CONFIG_TYPEC_MUX_PI3USB30532=y
CONFIG_TYPEC_MUX_INTEL_PMC=y
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=y
CONFIG_TYPEC_NVIDIA_ALTMODE=y
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=y
CONFIG_USB_ROLES_INTEL_XHCI=y
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SD8787=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
CONFIG_MMC_CRYPTO=y
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_DWCMSHC=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_MILBEAUT=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_ALCOR=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_REALTEK_PCI=y
CONFIG_MMC_REALTEK_USB=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_TOSHIBA_PCI=y
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_SDHCI_OMAP=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MMC_SDHCI_EXTERNAL_DMA=y
CONFIG_MMC_LITEX=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
CONFIG_SCSI_UFS_HPB=y
CONFIG_SCSI_UFS_FAULT_INJECTION=y
CONFIG_SCSI_UFS_HWMON=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFS_DWC_TC_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_CDNS_PLATFORM=y
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_MEMSTICK_REALTEK_USB=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AN30259A=y
CONFIG_LEDS_APU=y
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_CPCAP=y
CONFIG_LEDS_CR0014114=y
CONFIG_LEDS_EL15203000=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_INTEL_SS4200=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77650=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXCPLD=y
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_NIC78BX=y
CONFIG_LEDS_SPI_BYTE=y
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
CONFIG_LEDS_LM36274=y
CONFIG_LEDS_TPS6105X=y
CONFIG_LEDS_LGM=y
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_MT6360=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=y
CONFIG_LEDS_SGM3140=y
#
# RGB LED drivers
#
CONFIG_LEDS_PWM_MULTICOLOR=y
CONFIG_LEDS_QCOM_LPG=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y
#
# Simple LED drivers
#
CONFIG_LEDS_SIEMENS_SIMATIC_IPC=y
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
CONFIG_SPEAKUP_SYNTH_APOLLO=y
CONFIG_SPEAKUP_SYNTH_AUDPTR=y
CONFIG_SPEAKUP_SYNTH_BNS=y
CONFIG_SPEAKUP_SYNTH_DECTLK=y
CONFIG_SPEAKUP_SYNTH_DECEXT=y
CONFIG_SPEAKUP_SYNTH_LTLK=y
CONFIG_SPEAKUP_SYNTH_SOFT=y
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
CONFIG_SPEAKUP_SYNTH_TXPRT=y
CONFIG_SPEAKUP_SYNTH_DUMMY=y
# end of Speakup console speech
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_BNXT_RE=y
CONFIG_INFINIBAND_CXGB4=y
CONFIG_INFINIBAND_EFA=y
CONFIG_INFINIBAND_ERDMA=y
CONFIG_INFINIBAND_HFI1=y
CONFIG_HFI1_DEBUG_SDMA_ORDER=y
CONFIG_SDMA_VERBOSITY=y
CONFIG_INFINIBAND_IRDMA=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_MLX5_INFINIBAND=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=y
CONFIG_INFINIBAND_QEDR=y
CONFIG_INFINIBAND_QIB=y
CONFIG_INFINIBAND_QIB_DCA=y
CONFIG_INFINIBAND_USNIC=y
CONFIG_INFINIBAND_VMWARE_PVRDMA=y
CONFIG_INFINIBAND_RDMAVT=y
CONFIG_RDMA_RXE=y
CONFIG_RDMA_SIW=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_SRPT=y
CONFIG_INFINIBAND_ISER=y
CONFIG_INFINIBAND_ISERT=y
CONFIG_INFINIBAND_RTRS=y
CONFIG_INFINIBAND_RTRS_CLIENT=y
CONFIG_INFINIBAND_RTRS_SERVER=y
CONFIG_INFINIBAND_OPA_VNIC=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_I3200=y
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
CONFIG_EDAC_I7CORE=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=y
CONFIG_EDAC_I7300=y
CONFIG_EDAC_SBRIDGE=y
CONFIG_EDAC_SKX=y
CONFIG_EDAC_I10NM=y
CONFIG_EDAC_PND2=y
CONFIG_EDAC_IGEN6=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=y
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BD70528=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_RC5T619=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6916=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_WM8350=y
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_ZYNQMP=y
CONFIG_RTC_DRV_CROS_EC=y
CONFIG_RTC_DRV_NTXEC=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_CADENCE=y
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_R7301=y
CONFIG_RTC_DRV_CPCAP=y
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_RTC_DRV_GOLDFISH=y
CONFIG_RTC_DRV_WILCO_EC=y
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_DW_AXI_DMAC=y
CONFIG_FSL_EDMA=y
CONFIG_INTEL_IDMA64=y
CONFIG_INTEL_IDXD_BUS=y
CONFIG_INTEL_IDXD=y
CONFIG_INTEL_IDXD_COMPAT=y
CONFIG_INTEL_IDXD_SVM=y
CONFIG_INTEL_IDXD_PERFMON=y
CONFIG_INTEL_IOATDMA=y
CONFIG_PLX_DMA=y
CONFIG_XILINX_ZYNQMP_DPDMA=y
CONFIG_AMD_PTDMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=y
CONFIG_DW_EDMA_PCIE=y
CONFIG_HSU_DMA=y
CONFIG_HSU_DMA_PCI=y
CONFIG_SF_PDMA=y
CONFIG_INTEL_LDMA=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS_CMA=y
# end of DMABUF options
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_UIO_PRUSS=y
CONFIG_UIO_MF624=y
CONFIG_UIO_HV_GENERIC=y
CONFIG_UIO_DFL=y
CONFIG_VFIO=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_MLX5_VFIO_PCI=y
CONFIG_VFIO_MDEV=y
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
CONFIG_VBOXGUEST=y
CONFIG_NITRO_ENCLAVES=y
CONFIG_NITRO_ENCLAVES_MISC_DEV_TEST=y
CONFIG_ACRN_HSM=y
CONFIG_EFI_SECRET=y
CONFIG_SEV_GUEST=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_VDPA=y
CONFIG_VIRTIO_PMEM=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MEM=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
CONFIG_VDPA=y
CONFIG_VDPA_SIM=y
CONFIG_VDPA_SIM_NET=y
CONFIG_VDPA_SIM_BLOCK=y
CONFIG_VDPA_USER=y
CONFIG_IFCVF=y
CONFIG_MLX5_VDPA=y
CONFIG_MLX5_VDPA_NET=y
CONFIG_VP_VDPA=y
CONFIG_ALIBABA_ENI_VDPA=y
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
CONFIG_VHOST_SCSI=y
CONFIG_VHOST_VSOCK=y
CONFIG_VHOST_VDPA=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=y
CONFIG_HYPERV_BALLOON=y
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_MEMORY_HOTPLUG_LIMIT=512
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GNTDEV_DMABUF=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_XEN_GRANT_DMA_ALLOC=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCI_STUB=y
CONFIG_XEN_PCIDEV_BACKEND=y
CONFIG_XEN_PVCALLS_FRONTEND=y
CONFIG_XEN_PVCALLS_BACKEND=y
CONFIG_XEN_SCSI_BACKEND=y
CONFIG_XEN_PRIVCMD=y
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_XEN_MCE_LOG=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=y
CONFIG_XEN_UNPOPULATED_ALLOC=y
CONFIG_XEN_GRANT_DMA_IOMMU=y
CONFIG_XEN_GRANT_DMA_OPS=y
CONFIG_XEN_VIRTIO=y
CONFIG_XEN_VIRTIO_FORCE_GRANT=y
# end of Xen driver support
CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=y
CONFIG_COMEDI_TEST=y
CONFIG_COMEDI_PARPORT=y
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
CONFIG_COMEDI_PCL726=y
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=y
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
CONFIG_COMEDI_PCM3724=y
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
CONFIG_COMEDI_DAS16M1=y
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=y
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=y
CONFIG_COMEDI_FL512=y
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=y
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=y
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
CONFIG_COMEDI_NI_LABPC_ISA=y
CONFIG_COMEDI_PCMAD=y
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=y
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=y
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=y
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
CONFIG_COMEDI_ADDI_APCI_1564=y
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=y
CONFIG_COMEDI_ADDI_APCI_3501=y
CONFIG_COMEDI_ADDI_APCI_3XXX=y
CONFIG_COMEDI_ADL_PCI6208=y
CONFIG_COMEDI_ADL_PCI7X3X=y
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
CONFIG_COMEDI_ADV_PCI1723=y
CONFIG_COMEDI_ADV_PCI1724=y
CONFIG_COMEDI_ADV_PCI1760=y
CONFIG_COMEDI_ADV_PCI_DIO=y
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
CONFIG_COMEDI_AMPLC_PC263_PCI=y
CONFIG_COMEDI_AMPLC_PCI224=y
CONFIG_COMEDI_AMPLC_PCI230=y
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
CONFIG_COMEDI_ICP_MULTI=y
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
CONFIG_COMEDI_KE_COUNTER=y
CONFIG_COMEDI_CB_PCIDAS64=y
CONFIG_COMEDI_CB_PCIDAS=y
CONFIG_COMEDI_CB_PCIDDA=y
CONFIG_COMEDI_CB_PCIMDAS=y
CONFIG_COMEDI_CB_PCIMDDA=y
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
CONFIG_COMEDI_NI_6527=y
CONFIG_COMEDI_NI_65XX=y
CONFIG_COMEDI_NI_660X=y
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
CONFIG_COMEDI_NI_PCIDIO=y
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=y
CONFIG_COMEDI_DAS08_CS=y
CONFIG_COMEDI_NI_DAQ_700_CS=y
CONFIG_COMEDI_NI_DAQ_DIO24_CS=y
CONFIG_COMEDI_NI_LABPC_CS=y
CONFIG_COMEDI_NI_MIO_CS=y
CONFIG_COMEDI_QUATECH_DAQP_CS=y
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=y
CONFIG_COMEDI_NI_USB6501=y
CONFIG_COMEDI_USBDUX=y
CONFIG_COMEDI_USBDUXFAST=y
CONFIG_COMEDI_USBDUXSIGMA=y
CONFIG_COMEDI_VMK80XX=y
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_ISADMA=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_LABPC_ISADMA=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
CONFIG_COMEDI_TESTS_NI_ROUTES=y
CONFIG_STAGING=y
CONFIG_PRISM2_USB=y
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_RTL8723BS=m
CONFIG_R8712U=y
CONFIG_R8188EU=m
CONFIG_RTS5208=y
CONFIG_VT6655=m
CONFIG_VT6656=m
#
# IIO staging drivers
#
#
# Accelerometers
#
CONFIG_ADIS16203=y
CONFIG_ADIS16240=y
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7816=y
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_SPI=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
CONFIG_AD9832=y
CONFIG_AD9834=y
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
CONFIG_ADE7854_SPI=y
# end of Active energy metering IC
#
# Resolver to digital converters
#
CONFIG_AD2S1210=y
# end of Resolver to digital converters
# end of IIO staging drivers
CONFIG_FB_SM750=y
CONFIG_STAGING_MEDIA=y
CONFIG_INTEL_ATOMISP=y
CONFIG_VIDEO_ATOMISP=y
CONFIG_VIDEO_ATOMISP_ISP2401=y
CONFIG_VIDEO_ATOMISP_OV2722=y
CONFIG_VIDEO_ATOMISP_GC2235=y
CONFIG_VIDEO_ATOMISP_MSRLIST_HELPER=y
CONFIG_VIDEO_ATOMISP_MT9M114=y
CONFIG_VIDEO_ATOMISP_GC0310=y
CONFIG_VIDEO_ATOMISP_OV2680=y
CONFIG_VIDEO_ATOMISP_OV5693=y
CONFIG_VIDEO_ATOMISP_LM3554=y
CONFIG_VIDEO_IPU3_IMGU=y
CONFIG_VIDEO_MAX96712=y
CONFIG_STAGING_MEDIA_DEPRECATED=y
CONFIG_VIDEO_CPIA2=y
CONFIG_VIDEO_MEYE=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=y
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_PATCH=y
CONFIG_DVB_SP8870=y
CONFIG_VIDEO_HEXIUM_GEMINI=y
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_MXB=y
CONFIG_DVB_BUDGET_CORE=y
CONFIG_DVB_BUDGET=y
CONFIG_DVB_BUDGET_CI=y
CONFIG_DVB_BUDGET_AV=y
CONFIG_VIDEO_STKWEBCAM=y
CONFIG_VIDEO_TM6000=y
CONFIG_VIDEO_TM6000_ALSA=y
CONFIG_VIDEO_TM6000_DVB=y
CONFIG_USB_ZR364XX=y
CONFIG_STAGING_BOARD=y
CONFIG_LTE_GDM724X=m
CONFIG_FB_TFT=y
CONFIG_FB_TFT_AGM1264K_FL=y
CONFIG_FB_TFT_BD663474=y
CONFIG_FB_TFT_HX8340BN=y
CONFIG_FB_TFT_HX8347D=y
CONFIG_FB_TFT_HX8353D=y
CONFIG_FB_TFT_HX8357D=y
CONFIG_FB_TFT_ILI9163=y
CONFIG_FB_TFT_ILI9320=y
CONFIG_FB_TFT_ILI9325=y
CONFIG_FB_TFT_ILI9340=y
CONFIG_FB_TFT_ILI9341=y
CONFIG_FB_TFT_ILI9481=y
CONFIG_FB_TFT_ILI9486=y
CONFIG_FB_TFT_PCD8544=y
CONFIG_FB_TFT_RA8875=y
CONFIG_FB_TFT_S6D02A1=y
CONFIG_FB_TFT_S6D1121=y
CONFIG_FB_TFT_SEPS525=y
CONFIG_FB_TFT_SH1106=y
CONFIG_FB_TFT_SSD1289=y
CONFIG_FB_TFT_SSD1305=y
CONFIG_FB_TFT_SSD1306=y
CONFIG_FB_TFT_SSD1331=y
CONFIG_FB_TFT_SSD1351=y
CONFIG_FB_TFT_ST7735R=y
CONFIG_FB_TFT_ST7789V=y
CONFIG_FB_TFT_TINYLCD=y
CONFIG_FB_TFT_TLS8204=y
CONFIG_FB_TFT_UC1611=y
CONFIG_FB_TFT_UC1701=y
CONFIG_FB_TFT_UPD161704=y
CONFIG_MOST_COMPONENTS=y
CONFIG_MOST_NET=y
CONFIG_MOST_VIDEO=y
CONFIG_MOST_DIM2=y
CONFIG_MOST_I2C=y
CONFIG_KS7010=y
CONFIG_GREYBUS_AUDIO=y
CONFIG_GREYBUS_AUDIO_APB_CODEC=y
CONFIG_GREYBUS_BOOTROM=y
CONFIG_GREYBUS_FIRMWARE=y
CONFIG_GREYBUS_HID=y
CONFIG_GREYBUS_LIGHT=y
CONFIG_GREYBUS_LOG=y
CONFIG_GREYBUS_LOOPBACK=y
CONFIG_GREYBUS_POWER=y
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
CONFIG_GREYBUS_BRIDGED_PHY=y
CONFIG_GREYBUS_GPIO=y
CONFIG_GREYBUS_I2C=y
CONFIG_GREYBUS_PWM=y
CONFIG_GREYBUS_SDIO=y
CONFIG_GREYBUS_SPI=y
CONFIG_GREYBUS_UART=y
CONFIG_GREYBUS_USB=y
CONFIG_PI433=y
CONFIG_XIL_AXIS_FIFO=y
CONFIG_FIELDBUS_DEV=y
CONFIG_HMS_ANYBUSS_BUS=y
CONFIG_ARCX_ANYBUS_CONTROLLER=y
CONFIG_HMS_PROFINET=y
CONFIG_QLGE=y
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
CONFIG_VME_TSI148=y
CONFIG_VME_FAKE=y
#
# VME Device Drivers
#
CONFIG_VME_USER=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_ACPI=y
CONFIG_CHROMEOS_LAPTOP=y
CONFIG_CHROMEOS_PSTORE=y
CONFIG_CHROMEOS_TBMC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_RPMSG=y
CONFIG_CROS_EC_ISHTP=y
CONFIG_CROS_EC_SPI=y
CONFIG_CROS_EC_LPC=y
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_CROS_EC_CHARDEV=y
CONFIG_CROS_EC_LIGHTBAR=y
CONFIG_CROS_EC_VBC=y
CONFIG_CROS_EC_DEBUGFS=y
CONFIG_CROS_EC_SENSORHUB=y
CONFIG_CROS_EC_SYSFS=y
CONFIG_CROS_EC_TYPEC=y
CONFIG_CROS_USBPD_LOGGER=y
CONFIG_CROS_USBPD_NOTIFY=y
CONFIG_CHROMEOS_PRIVACY_SCREEN=y
CONFIG_CROS_TYPEC_SWITCH=y
CONFIG_WILCO_EC=y
CONFIG_WILCO_EC_DEBUGFS=y
CONFIG_WILCO_EC_EVENTS=y
CONFIG_WILCO_EC_TELEMETRY=y
CONFIG_CROS_KUNIT=y
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_MLXREG_LC=y
CONFIG_NVSW_SN2201=y
CONFIG_SURFACE_PLATFORMS=y
CONFIG_SURFACE3_WMI=y
CONFIG_SURFACE_3_POWER_OPREGION=y
CONFIG_SURFACE_ACPI_NOTIFY=y
CONFIG_SURFACE_AGGREGATOR_CDEV=y
CONFIG_SURFACE_AGGREGATOR_HUB=y
CONFIG_SURFACE_AGGREGATOR_REGISTRY=y
CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH=y
CONFIG_SURFACE_DTX=y
CONFIG_SURFACE_GPE=y
CONFIG_SURFACE_HOTPLUG=y
CONFIG_SURFACE_PLATFORM_PROFILE=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_SURFACE_AGGREGATOR=y
CONFIG_SURFACE_AGGREGATOR_BUS=y
CONFIG_SURFACE_AGGREGATOR_ERROR_INJECTION=y
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=y
CONFIG_WMI_BMOF=y
CONFIG_HUAWEI_WMI=y
CONFIG_UV_SYSFS=y
CONFIG_MXM_WMI=y
CONFIG_PEAQ_WMI=y
CONFIG_NVIDIA_WMI_EC_BACKLIGHT=y
CONFIG_XIAOMI_WMI=y
CONFIG_GIGABYTE_WMI=y
CONFIG_YOGABOOK_WMI=y
CONFIG_ACERHDF=y
CONFIG_ACER_WIRELESS=y
CONFIG_ACER_WMI=y
CONFIG_AMD_PMF=y
CONFIG_AMD_PMC=y
CONFIG_AMD_HSMP=y
CONFIG_ADV_SWBUTTON=y
CONFIG_APPLE_GMUX=y
CONFIG_ASUS_LAPTOP=y
CONFIG_ASUS_WIRELESS=y
CONFIG_ASUS_WMI=y
CONFIG_ASUS_NB_WMI=y
CONFIG_ASUS_TF103C_DOCK=y
CONFIG_MERAKI_MX100=y
CONFIG_EEEPC_LAPTOP=y
CONFIG_EEEPC_WMI=y
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
CONFIG_ALIENWARE_WMI=y
CONFIG_DCDBAS=y
CONFIG_DELL_LAPTOP=y
CONFIG_DELL_RBU=y
CONFIG_DELL_RBTN=y
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_SMBIOS_WMI=y
CONFIG_DELL_SMBIOS_SMM=y
CONFIG_DELL_SMO8800=y
CONFIG_DELL_WMI=y
CONFIG_DELL_WMI_PRIVACY=y
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_WMI_DESCRIPTOR=y
CONFIG_DELL_WMI_LED=y
CONFIG_DELL_WMI_SYSMAN=y
CONFIG_AMILO_RFKILL=y
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_TABLET=y
CONFIG_GPD_POCKET_FAN=y
CONFIG_HP_ACCEL=y
CONFIG_WIRELESS_HOTKEY=y
CONFIG_HP_WMI=y
CONFIG_IBM_RTL=y
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_SENSORS_HDAPS=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_THINKPAD_LMI=y
CONFIG_INTEL_ATOMISP2_PDX86=y
CONFIG_INTEL_ATOMISP2_LED=y
CONFIG_INTEL_SAR_INT1092=y
CONFIG_INTEL_SKL_INT3472=y
CONFIG_INTEL_PMC_CORE=y
CONFIG_INTEL_PMT_CLASS=y
CONFIG_INTEL_PMT_TELEMETRY=y
CONFIG_INTEL_PMT_CRASHLOG=y
#
# Intel Speed Select Technology interface support
#
CONFIG_INTEL_SPEED_SELECT_INTERFACE=y
# end of Intel Speed Select Technology interface support
CONFIG_INTEL_TELEMETRY=y
CONFIG_INTEL_WMI=y
CONFIG_INTEL_WMI_SBL_FW_UPDATE=y
CONFIG_INTEL_WMI_THUNDERBOLT=y
#
# Intel Uncore Frequency Control
#
CONFIG_INTEL_UNCORE_FREQ_CONTROL=y
# end of Intel Uncore Frequency Control
CONFIG_INTEL_HID_EVENT=y
CONFIG_INTEL_VBTN=y
CONFIG_INTEL_INT0002_VGPIO=y
CONFIG_INTEL_OAKTRAIL=y
CONFIG_INTEL_BXTWC_PMIC_TMU=y
CONFIG_INTEL_CHTDC_TI_PWRBTN=y
CONFIG_INTEL_CHTWC_INT33FE=y
CONFIG_INTEL_ISHTP_ECLITE=y
CONFIG_INTEL_MRFLD_PWRBTN=y
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SDSI=y
CONFIG_INTEL_SMARTCONNECT=y
CONFIG_INTEL_TURBO_MAX_3=y
CONFIG_INTEL_VSEC=y
CONFIG_MSI_LAPTOP=y
CONFIG_MSI_WMI=y
CONFIG_PCENGINES_APU2=y
CONFIG_BARCO_P50_GPIO=y
CONFIG_SAMSUNG_LAPTOP=y
CONFIG_SAMSUNG_Q10=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
CONFIG_TOSHIBA_WMI=y
CONFIG_ACPI_CMPC=y
CONFIG_COMPAL_LAPTOP=y
CONFIG_LG_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_SONY_LAPTOP=y
CONFIG_SONYPI_COMPAT=y
CONFIG_SYSTEM76_ACPI=y
CONFIG_TOPSTAR_LAPTOP=y
CONFIG_SERIAL_MULTI_INSTANTIATE=y
CONFIG_MLX_PLATFORM=y
CONFIG_TOUCHSCREEN_DMI=y
CONFIG_X86_ANDROID_TABLETS=y
CONFIG_FW_ATTR_CLASS=y
CONFIG_INTEL_IPS=y
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
CONFIG_INTEL_SCU_PLATFORM=y
CONFIG_INTEL_SCU_WDT=y
CONFIG_INTEL_SCU_IPC_UTIL=y
CONFIG_SIEMENS_SIMATIC_IPC=y
CONFIG_WINMATE_FM07_KEYS=y
CONFIG_P2SB=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y
CONFIG_LMK04832=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_AXI_CLKGEN=y
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PALMAS=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_RS9_PCIE=y
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_VC7=y
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_LGM_CGU=y
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_MAILBOX_TEST=y
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
# end of Generic IOMMU Pagetable Support
CONFIG_IOMMU_DEBUGFS=y
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
CONFIG_IOMMU_SVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=y
CONFIG_AMD_IOMMU_DEBUGFS=y
CONFIG_DMAR_TABLE=y
CONFIG_DMAR_PERF=y
CONFIG_DMAR_DEBUG=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEBUGFS=y
CONFIG_INTEL_IOMMU_SVM=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y
CONFIG_VIRTIO_IOMMU=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=y
CONFIG_SOUNDWIRE_INTEL=y
CONFIG_SOUNDWIRE_QCOM=y
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=y
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
CONFIG_QCOM_QMI_HELPERS=y
# end of Qualcomm SoC drivers
CONFIG_SOC_TI=y
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_AXP288=y
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_INTEL_INT3496=y
CONFIG_EXTCON_INTEL_CHT_WC=y
CONFIG_EXTCON_INTEL_MRFLD=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX77843=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=y
CONFIG_FPGA_DFL_EMIF=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_ADIS16201=y
CONFIG_ADIS16209=y
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL313_SPI=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
CONFIG_ADXL355_SPI=y
CONFIG_ADXL367=y
CONFIG_ADXL367_SPI=y
CONFIG_ADXL367_I2C=y
CONFIG_ADXL372=y
CONFIG_ADXL372_SPI=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA220=y
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMA400_SPI=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
CONFIG_BMI088_ACCEL=y
CONFIG_BMI088_ACCEL_SPI=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
CONFIG_FXLS8962AF_SPI=y
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
CONFIG_KXSD9=y
CONFIG_KXSD9_SPI=y
CONFIG_KXSD9_I2C=y
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7455_SPI=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MSA311=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_SCA3000=y
CONFIG_SCA3300=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7091R5=y
CONFIG_AD7124=y
CONFIG_AD7192=y
CONFIG_AD7266=y
CONFIG_AD7280=y
CONFIG_AD7291=y
CONFIG_AD7292=y
CONFIG_AD7298=y
CONFIG_AD7476=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD7606_IFACE_SPI=y
CONFIG_AD7766=y
CONFIG_AD7768_1=y
CONFIG_AD7780=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD7949=y
CONFIG_AD799X=y
CONFIG_AD9467=y
CONFIG_ADI_AXI_ADC=y
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
CONFIG_CC10001_ADC=y
CONFIG_CPCAP_ADC=y
CONFIG_DA9150_GPADC=y
CONFIG_DLN2_ADC=y
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_HI8435=y
CONFIG_HX711=y
CONFIG_INTEL_MRFLD_ADC=y
CONFIG_LP8788_ADC=y
CONFIG_LTC2471=y
CONFIG_LTC2485=y
CONFIG_LTC2496=y
CONFIG_LTC2497=y
CONFIG_MAX1027=y
CONFIG_MAX11100=y
CONFIG_MAX1118=y
CONFIG_MAX11205=y
CONFIG_MAX1241=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP320X=y
CONFIG_MCP3422=y
CONFIG_MCP3911=y
CONFIG_MEDIATEK_MT6360_ADC=y
CONFIG_MEN_Z188_ADC=y
CONFIG_MP2629_ADC=y
CONFIG_NAU7802=y
CONFIG_PALMAS_GPADC=y
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_SPMI_IADC=y
CONFIG_QCOM_SPMI_VADC=y
CONFIG_QCOM_SPMI_ADC5=y
CONFIG_RN5T618_ADC=y
CONFIG_RICHTEK_RTQ6056=y
CONFIG_SD_ADC_MODULATOR=y
CONFIG_STMPE_ADC=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=y
CONFIG_TI_ADC108S102=y
CONFIG_TI_ADC128S052=y
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS1015=y
CONFIG_TI_ADS7950=y
CONFIG_TI_ADS8344=y
CONFIG_TI_ADS8688=y
CONFIG_TI_ADS124S08=y
CONFIG_TI_ADS131E08=y
CONFIG_TI_AM335X_ADC=y
CONFIG_TI_TLC4541=y
CONFIG_TI_TSC2046=y
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
CONFIG_VIPERBOARD_ADC=y
CONFIG_XILINX_XADC=y
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
CONFIG_AD74413R=y
CONFIG_STX104=y
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_AD8366=y
CONFIG_ADA4250=y
CONFIG_HMC425=y
# end of Amplifiers
#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7746=y
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_BME680_SPI=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
CONFIG_SCD30_CORE=y
CONFIG_SCD30_I2C=y
CONFIG_SCD30_SERIAL=y
CONFIG_SCD4X=y
CONFIG_SENSIRION_SGP30=y
CONFIG_SENSIRION_SGP40=y
CONFIG_SPS30=y
CONFIG_SPS30_I2C=y
CONFIG_SPS30_SERIAL=y
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors
CONFIG_IIO_CROS_EC_SENSORS_CORE=y
CONFIG_IIO_CROS_EC_SENSORS=y
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=y
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD3552R=y
CONFIG_AD5064=y
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=y
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
CONFIG_LTC2688=y
CONFIG_AD5686=y
CONFIG_AD5686_SPI=y
CONFIG_AD5696_I2C=y
CONFIG_AD5755=y
CONFIG_AD5758=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5766=y
CONFIG_AD5770R=y
CONFIG_AD5791=y
CONFIG_AD7293=y
CONFIG_AD7303=y
CONFIG_AD8801=y
CONFIG_CIO_DAC=y
CONFIG_DPOT_DAC=y
CONFIG_DS4424=y
CONFIG_LTC1660=y
CONFIG_LTC2632=y
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=y
CONFIG_MCP4725=y
CONFIG_MCP4922=y
CONFIG_TI_DAC082S085=y
CONFIG_TI_DAC5571=y
CONFIG_TI_DAC7311=y
CONFIG_TI_DAC7612=y
CONFIG_VF610_DAC=y
# end of Digital to analog converters
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver
#
# Filters
#
CONFIG_ADMV8818=y
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
CONFIG_ADF4371=y
CONFIG_ADMV1013=y
CONFIG_ADMV1014=y
CONFIG_ADMV4420=y
CONFIG_ADRF6780=y
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
CONFIG_ADXRS290=y
CONFIG_ADXRS450=y
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_BMG160_SPI=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_FXAS21002C_SPI=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
CONFIG_HDC2010=y
CONFIG_HID_SENSOR_HUMIDITY=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTS221_SPI=y
CONFIG_HTU21=y
CONFIG_SI7005=y
CONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16460=y
CONFIG_ADIS16475=y
CONFIG_ADIS16480=y
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BMI160_SPI=y
CONFIG_BOSCH_BNO055=y
CONFIG_BOSCH_BNO055_SERIAL=y
CONFIG_BOSCH_BNO055_I2C=y
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_FXOS8700_SPI=y
CONFIG_KMX61=y
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=y
CONFIG_INV_ICM42600_SPI=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_SPI=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=y
CONFIG_ADJD_S311=y
CONFIG_ADUX1020=y
CONFIG_AL3010=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_IIO_CROS_EC_LIGHT_PROX=y
CONFIG_GP2AP002=y
CONFIG_GP2AP020A00F=y
CONFIG_IQS621_ALS=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
CONFIG_HID_SENSOR_ALS=y
CONFIG_HID_SENSOR_PROX=y
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
CONFIG_LTR501=y
CONFIG_LTRF216A=y
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1133=y
CONFIG_SI1145=y
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
CONFIG_ST_UVIS25_SPI=y
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
CONFIG_VEML6030=y
CONFIG_VEML6070=y
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_SENSORS_RM3100_SPI=y
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
CONFIG_HID_SENSOR_DEVICE_ROTATION=y
# end of Inclinometer sensors
CONFIG_IIO_RESCALE_KUNIT_TEST=y
CONFIG_IIO_FORMAT_KUNIT_TEST=y
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone
#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=y
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=y
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=y
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MAX5432=y
CONFIG_MAX5481=y
CONFIG_MAX5487=y
CONFIG_MCP4018=y
CONFIG_MCP4131=y
CONFIG_MCP4531=y
CONFIG_MCP41010=y
CONFIG_TPL0102=y
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
CONFIG_IIO_CROS_EC_BARO=y
CONFIG_DLHL60D=y
CONFIG_DPS310=y
CONFIG_HID_SENSOR_PRESS=y
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5611_SPI=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
# end of Pressure sensors
#
# Lightning sensors
#
CONFIG_AS3935=y
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=y
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_PING=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
CONFIG_SX9324=y
CONFIG_SX9360=y
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=y
CONFIG_LTC2983=y
CONFIG_MAXIM_THERMOCOUPLE=y
CONFIG_HID_SENSOR_TEMP=y
CONFIG_MLX90614=y
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TMP117=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
CONFIG_MAX31856=y
CONFIG_MAX31865=y
# end of Temperature sensors
CONFIG_NTB=y
CONFIG_NTB_MSI=y
CONFIG_NTB_AMD=y
CONFIG_NTB_IDT=y
CONFIG_NTB_INTEL=y
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=y
CONFIG_NTB_PINGPONG=y
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
CONFIG_NTB_MSI_TEST=y
CONFIG_NTB_TRANSPORT=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_CLK=y
CONFIG_PWM_CRC=y
CONFIG_PWM_CROS_EC=y
CONFIG_PWM_DWC=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_INTEL_LGM=y
CONFIG_PWM_IQS620A=y
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=y
CONFIG_PWM_NTXEC=y
CONFIG_PWM_PCA9685=y
CONFIG_PWM_STMPE=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
CONFIG_PWM_XILINX=y
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=y
CONFIG_XILINX_INTC=y
# end of IRQ chip support
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_INTEL_GW=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_USB_LGM_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=y
#
# PHY drivers for Broadcom platforms
#
CONFIG_BCM_KONA_USB2_PHY=y
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_CPCAP_USB=y
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_SAMSUNG_USB2=y
CONFIG_PHY_TUSB1210=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=y
CONFIG_INTEL_RAPL=y
CONFIG_IDLE_INJECT=y
CONFIG_DTPM=y
CONFIG_DTPM_CPU=y
CONFIG_DTPM_DEVFREQ=y
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=y
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
CONFIG_RAS_CEC=y
CONFIG_RAS_CEC_DEBUG=y
CONFIG_USB4=y
CONFIG_USB4_DEBUGFS_WRITE=y
CONFIG_USB4_DEBUGFS_MARGINING=y
CONFIG_USB4_KUNIT_TEST=y
CONFIG_USB4_DMA_TEST=y
#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_ND_PFN=y
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_OF_PMEM=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_DEV_DAX_PMEM=y
CONFIG_DEV_DAX_HMEM=y
CONFIG_DEV_DAX_HMEM_DEVICES=y
CONFIG_DEV_DAX_KMEM=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_RAVE_SP_EEPROM=y
CONFIG_NVMEM_RMEM=y
CONFIG_NVMEM_SPMI_SDAM=y
CONFIG_NVMEM_U_BOOT_ENV=y
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_STM_SOURCE_FTRACE=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_ACPI=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=y
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_MGR_XILINX_SPI=y
CONFIG_FPGA_MGR_ICE40_SPI=y
CONFIG_FPGA_MGR_MACHXO2_SPI=y
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
CONFIG_OF_FPGA_REGION=y
CONFIG_FPGA_DFL=y
CONFIG_FPGA_DFL_FME=y
CONFIG_FPGA_DFL_FME_MGR=y
CONFIG_FPGA_DFL_FME_BRIDGE=y
CONFIG_FPGA_DFL_FME_REGION=y
CONFIG_FPGA_DFL_AFU=y
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=y
CONFIG_FPGA_DFL_PCI=y
CONFIG_FPGA_M10_BMC_SEC_UPDATE=y
CONFIG_FPGA_MGR_MICROCHIP_SPI=y
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
CONFIG_TEE=y
CONFIG_AMDTEE=y
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_ADGS1408=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=y
CONFIG_104_QUAD_8=y
CONFIG_INTERRUPT_CNT=y
CONFIG_FTM_QUADDEC=y
CONFIG_MICROCHIP_TCB_CAPTURE=y
CONFIG_INTEL_QEP=y
CONFIG_MOST=y
CONFIG_MOST_USB_HDM=y
CONFIG_MOST_CDEV=y
CONFIG_MOST_SND=y
CONFIG_PECI=y
CONFIG_PECI_CPU=y
CONFIG_HTE=y
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_F2FS_UNFAIR_RWSEM=y
CONFIG_ZONEFS_FS=y
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=y
CONFIG_FUSE_DAX=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
CONFIG_OVERLAY_FS_METACOPY=y
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_ERROR_INJECTION=y
CONFIG_CACHEFILES_ONDEMAND=y
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=y
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=y
CONFIG_NTFS3_64BIT_CLUSTER=y
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_CRAMFS_MTD=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_FTRACE=y
CONFIG_PSTORE_RAM=y
CONFIG_PSTORE_ZONE=y
CONFIG_PSTORE_BLK=y
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_PSTORE_BLK_PMSG_SIZE=64
CONFIG_PSTORE_BLK_CONSOLE_SIZE=64
CONFIG_PSTORE_BLK_FTRACE_SIZE=64
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=y
CONFIG_EROFS_FS_DEBUG=y
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_ZIP_LZMA=y
CONFIG_EROFS_FS_ONDEMAND=y
CONFIG_VBOXSF_FS=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=y
CONFIG_PNFS_FLEXFILE_LAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DEBUG_DUMP_KEYS=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
CONFIG_CIFS_SMB_DIRECT=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ROOT=y
CONFIG_SMB_SERVER=y
CONFIG_SMB_SERVER_SMBDIRECT=y
CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=y
CONFIG_SMB_SERVER_KERBEROS5=y
CONFIG_SMBFS_COMMON=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
CONFIG_AFS_DEBUG_CURSOR=y
CONFIG_9P_FS=y
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEPRECATED_API=y
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_INFINIBAND=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y
CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_APPARMOR_KUNIT_TEST=y
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENFORCE=y
CONFIG_SECURITY_LOADPIN_VERITY=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_LOAD_UEFI_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_KEXEC=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
# CONFIG_IMA_DEFAULT_HASH_SM3 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
CONFIG_IMA_APPRAISE_BUILD_POLICY=y
CONFIG_IMA_APPRAISE_REQUIRE_FIRMWARE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_MODULE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_POLICY_SIGS=y
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_APPRAISE_MODSIG=y
CONFIG_IMA_TRUSTED_KEYRING=y
CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY=y
CONFIG_IMA_BLACKLIST_KEYRING=y
CONFIG_IMA_LOAD_X509=y
CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
CONFIG_IMA_APPRAISE_SIGNED_INIT=y
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT=y
CONFIG_IMA_DISABLE_HTABLE=y
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_EXTRA_SMACK_XATTRS=y
CONFIG_EVM_ADD_XATTRS=y
CONFIG_EVM_LOAD_X509=y
CONFIG_EVM_X509_PATH="/etc/keys/x509_evm.der"
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
CONFIG_GCC_PLUGIN_STACKLEAK=y
# CONFIG_GCC_PLUGIN_STACKLEAK_VERBOSE is not set
CONFIG_STACKLEAK_TRACK_MIN_SIZE=100
CONFIG_STACKLEAK_METRICS=y
CONFIG_STACKLEAK_RUNTIME_DISABLE=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization
# CONFIG_RANDSTRUCT_NONE is not set
CONFIG_RANDSTRUCT_FULL=y
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
CONFIG_RANDSTRUCT=y
CONFIG_GCC_PLUGIN_RANDSTRUCT=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_STATS=y
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (x86)
#
CONFIG_CRYPTO_CURVE25519_X86=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES3_EDE_X86_64=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CHACHA20_X86_64=y
CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=y
CONFIG_CRYPTO_NHPOLY1305_SSE2=y
CONFIG_CRYPTO_NHPOLY1305_AVX2=y
CONFIG_CRYPTO_BLAKE2S_X86=y
CONFIG_CRYPTO_POLYVAL_CLMUL_NI=y
CONFIG_CRYPTO_POLY1305_X86_64=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SM3_AVX_X86_64=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
# end of Accelerated Cryptographic Algorithms for CPU (x86)
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=y
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=y
CONFIG_CRYPTO_DEV_SP_PSP=y
CONFIG_CRYPTO_DEV_CCP_DEBUGFS=y
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
CONFIG_CRYPTO_DEV_QAT_C62X=y
CONFIG_CRYPTO_DEV_QAT_4XXX=y
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=y
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
CONFIG_CRYPTO_DEV_NITROX=y
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=y
CONFIG_CRYPTO_DEV_CHELSIO=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=y
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_FIPS_SIGNATURE_SELFTEST=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
CONFIG_DMA_RESTRICTED_POOL=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_CMA=y
CONFIG_DMA_PERNUMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_FORCE_NR_CPUS=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_6x10=y
CONFIG_FONT_10x18=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_TER16x32=y
CONFIG_FONT_6x8=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=y
CONFIG_OBJAGG=y
# end of Library routines
CONFIG_PLDMFW=y
CONFIG_ASN1_ENCODER=y
CONFIG_POLYNOMIAL=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=8192
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
CONFIG_OBJTOOL=y
CONFIG_NOINSTR_VALIDATION=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_EARLY_DEBUG=y
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
CONFIG_NET_NS_REFCNT_TRACKER=y
CONFIG_DEBUG_NET=y
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_TABLE_CHECK=y
CONFIG_PAGE_TABLE_CHECK_ENFORCED=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_PAGE_REF=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SHRINKER_DEBUG=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_TEST=m
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
CONFIG_KASAN_OUTLINE=y
# CONFIG_KASAN_INLINE is not set
CONFIG_KASAN_STACK=y
CONFIG_KASAN_VMALLOC=y
CONFIG_KASAN_KUNIT_TEST=y
CONFIG_KASAN_MODULE_TEST=m
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=y
CONFIG_KFENCE_STATIC_KEYS=y
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_KFENCE_KUNIT_TEST=y
CONFIG_HAVE_ARCH_KMSAN=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
CONFIG_CSD_LOCK_WAIT_DEBUG=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_KOBJECT_RELEASE=y
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_FPROBE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
CONFIG_TRACE_PREEMPT_TOGGLE=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_MMIOTRACE=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_KPROBE_EVENTS_ON_NOTRACE=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACE_EVENT_INJECT=y
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_FTRACE_RECORD_RECURSION=y
CONFIG_FTRACE_RECORD_RECURSION_SIZE=128
CONFIG_RING_BUFFER_RECORD_RECURSION=y
CONFIG_GCOV_PROFILE_FTRACE=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_TEST_SYSCALLS=y
CONFIG_FTRACE_SORT_STARTUP_TEST=y
CONFIG_RING_BUFFER_STARTUP_TEST=y
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_MMIOTRACE_TEST=m
CONFIG_PREEMPTIRQ_DELAY_TEST=m
CONFIG_SYNTH_EVENT_GEN_TEST=y
CONFIG_KPROBE_EVENT_GEN_TEST=y
CONFIG_HIST_TRIGGERS_DEBUG=y
CONFIG_DA_MON_EVENTS=y
CONFIG_DA_MON_EVENTS_IMPLICIT=y
CONFIG_DA_MON_EVENTS_ID=y
CONFIG_RV=y
CONFIG_RV_MON_WIP=y
CONFIG_RV_MON_WWNR=y
CONFIG_RV_REACTORS=y
CONFIG_RV_REACT_PRINTK=y
CONFIG_RV_REACT_PANIC=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_AUXDISPLAY=y
CONFIG_SAMPLE_TRACE_EVENTS=m
CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS=m
CONFIG_SAMPLE_TRACE_PRINTK=m
CONFIG_SAMPLE_FTRACE_DIRECT=m
CONFIG_SAMPLE_FTRACE_DIRECT_MULTI=m
CONFIG_SAMPLE_TRACE_ARRAY=m
CONFIG_SAMPLE_KOBJECT=y
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
CONFIG_SAMPLE_HW_BREAKPOINT=m
CONFIG_SAMPLE_FPROBE=m
CONFIG_SAMPLE_KFIFO=m
CONFIG_SAMPLE_KDB=m
CONFIG_SAMPLE_RPMSG_CLIENT=m
CONFIG_SAMPLE_LIVEPATCH=m
CONFIG_SAMPLE_CONFIGFS=m
CONFIG_SAMPLE_CONNECTOR=m
CONFIG_SAMPLE_FANOTIFY_ERROR=y
CONFIG_SAMPLE_HIDRAW=y
CONFIG_SAMPLE_LANDLOCK=y
CONFIG_SAMPLE_PIDFD=y
CONFIG_SAMPLE_SECCOMP=y
CONFIG_SAMPLE_TIMER=y
CONFIG_SAMPLE_UHID=y
CONFIG_SAMPLE_VFIO_MDEV_MTTY=m
CONFIG_SAMPLE_VFIO_MDEV_MDPY=m
CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB=m
CONFIG_SAMPLE_VFIO_MDEV_MBOCHS=m
CONFIG_SAMPLE_ANDROID_BINDERFS=y
CONFIG_SAMPLE_VFS=y
CONFIG_SAMPLE_INTEL_MEI=y
CONFIG_SAMPLE_WATCHDOG=y
CONFIG_SAMPLE_WATCH_QUEUE=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# x86 Debugging
#
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
CONFIG_EFI_PGT_DUMP=y
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_IOMMU_DEBUG=y
CONFIG_IOMMU_LEAK=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_DEBUG_ENTRY=y
CONFIG_DEBUG_NMI_SELFTEST=y
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_FUNCTION=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAIL_SUNRPC=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_FPROBE_SANITY_TEST=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
CONFIG_RBTREE_TEST=y
CONFIG_REED_SOLOMON_TEST=y
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=y
CONFIG_TEST_HEXDUMP=y
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_XARRAY=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_SIPHASH=y
CONFIG_TEST_IDA=y
CONFIG_TEST_PARMAN=y
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_TEST_SYSCTL=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
CONFIG_LINEAR_RANGES_TEST=y
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_SLUB_KUNIT_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_FORTIFY_KUNIT_TEST=y
CONFIG_HW_BREAKPOINT_KUNIT_TEST=y
CONFIG_TEST_UDELAY=y
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_DYNAMIC_DEBUG=y
CONFIG_TEST_KMOD=m
CONFIG_TEST_DEBUG_VIRTUAL=y
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_LIVEPATCH=m
CONFIG_TEST_OBJAGG=y
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_HMM=y
CONFIG_TEST_FREE_PAGES=y
CONFIG_TEST_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
CONFIG_HYPERV_TESTING=y
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 10/9] xfs: add debug knob to slow down writeback for fun
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
` (8 preceding siblings ...)
2022-11-23 5:58 ` [PATCH 9/9] xfs: drop write error injection is unfixable, remove it Dave Chinner
@ 2022-11-28 22:34 ` Darrick J. Wong
2022-11-28 23:30 ` Dave Chinner
2022-11-29 1:21 ` [PATCH v2 " Darrick J. Wong
2022-11-28 22:34 ` [PATCH 11/9] xfs: add debug knob to slow down write for fun Darrick J. Wong
10 siblings, 2 replies; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-28 22:34 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel
From: Darrick J. Wong <djwong@kernel.org>
Add a new error injection knob so that we can arbitrarily slow down
writeback to test for race conditions and aberrant reclaim behavior if
the writeback mechanisms are slow to issue writeback. This will enable
functional testing for the ifork sequence counters introduced in commit
745b3f76d1c8 ("xfs: maintain a sequence count for inode fork
manipulations").
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/libxfs/xfs_errortag.h | 4 +++-
fs/xfs/xfs_aops.c | 12 ++++++++++--
fs/xfs/xfs_error.c | 11 +++++++++++
fs/xfs/xfs_error.h | 22 ++++++++++++++++++++++
4 files changed, 46 insertions(+), 3 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_errortag.h b/fs/xfs/libxfs/xfs_errortag.h
index 580ccbd5aadc..f5f629174eca 100644
--- a/fs/xfs/libxfs/xfs_errortag.h
+++ b/fs/xfs/libxfs/xfs_errortag.h
@@ -61,7 +61,8 @@
#define XFS_ERRTAG_LARP 39
#define XFS_ERRTAG_DA_LEAF_SPLIT 40
#define XFS_ERRTAG_ATTR_LEAF_TO_NODE 41
-#define XFS_ERRTAG_MAX 42
+#define XFS_ERRTAG_WB_DELAY_MS 42
+#define XFS_ERRTAG_MAX 43
/*
* Random factors for above tags, 1 means always, 2 means 1/2 time, etc.
@@ -107,5 +108,6 @@
#define XFS_RANDOM_LARP 1
#define XFS_RANDOM_DA_LEAF_SPLIT 1
#define XFS_RANDOM_ATTR_LEAF_TO_NODE 1
+#define XFS_RANDOM_WB_DELAY_MS 3000
#endif /* __XFS_ERRORTAG_H_ */
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index a22d90af40c8..4a13260527b9 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -17,6 +17,8 @@
#include "xfs_bmap.h"
#include "xfs_bmap_util.h"
#include "xfs_reflink.h"
+#include "xfs_errortag.h"
+#include "xfs_error.h"
struct xfs_writepage_ctx {
struct iomap_writepage_ctx ctx;
@@ -217,11 +219,15 @@ xfs_imap_valid(
* checked (and found nothing at this offset) could have added
* overlapping blocks.
*/
- if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq))
+ if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq)) {
+ XFS_ERRORTAG_REPORT(ip->i_mount, XFS_ERRTAG_WB_DELAY_MS);
return false;
+ }
if (xfs_inode_has_cow_data(ip) &&
- XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq))
+ XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq)) {
+ XFS_ERRORTAG_REPORT(ip->i_mount, XFS_ERRTAG_WB_DELAY_MS);
return false;
+ }
return true;
}
@@ -285,6 +291,8 @@ xfs_map_blocks(
if (xfs_is_shutdown(mp))
return -EIO;
+ XFS_ERRORTAG_DELAY(mp, XFS_ERRTAG_WB_DELAY_MS);
+
/*
* COW fork blocks can overlap data fork blocks even if the blocks
* aren't shared. COW I/O always takes precedent, so we must always
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index dea3c0649d2f..13ac52e7f9e5 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -60,6 +60,7 @@ static unsigned int xfs_errortag_random_default[] = {
XFS_RANDOM_LARP,
XFS_RANDOM_DA_LEAF_SPLIT,
XFS_RANDOM_ATTR_LEAF_TO_NODE,
+ XFS_RANDOM_WB_DELAY_MS,
};
struct xfs_errortag_attr {
@@ -175,6 +176,7 @@ XFS_ERRORTAG_ATTR_RW(ag_resv_fail, XFS_ERRTAG_AG_RESV_FAIL);
XFS_ERRORTAG_ATTR_RW(larp, XFS_ERRTAG_LARP);
XFS_ERRORTAG_ATTR_RW(da_leaf_split, XFS_ERRTAG_DA_LEAF_SPLIT);
XFS_ERRORTAG_ATTR_RW(attr_leaf_to_node, XFS_ERRTAG_ATTR_LEAF_TO_NODE);
+XFS_ERRORTAG_ATTR_RW(wb_delay_ms, XFS_ERRTAG_WB_DELAY_MS);
static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(noerror),
@@ -218,6 +220,7 @@ static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(larp),
XFS_ERRORTAG_ATTR_LIST(da_leaf_split),
XFS_ERRORTAG_ATTR_LIST(attr_leaf_to_node),
+ XFS_ERRORTAG_ATTR_LIST(wb_delay_ms),
NULL,
};
ATTRIBUTE_GROUPS(xfs_errortag);
@@ -267,6 +270,14 @@ xfs_errortag_valid(
return true;
}
+bool
+xfs_errortag_enabled(
+ struct xfs_mount *mp,
+ unsigned int tag)
+{
+ return mp->m_errortag && mp->m_errortag[tag] != 0;
+}
+
bool
xfs_errortag_test(
struct xfs_mount *mp,
diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
index 5191e9145e55..15baa5428e1a 100644
--- a/fs/xfs/xfs_error.h
+++ b/fs/xfs/xfs_error.h
@@ -45,6 +45,26 @@ extern bool xfs_errortag_test(struct xfs_mount *mp, const char *expression,
const char *file, int line, unsigned int error_tag);
#define XFS_TEST_ERROR(expr, mp, tag) \
((expr) || xfs_errortag_test((mp), #expr, __FILE__, __LINE__, (tag)))
+bool xfs_errortag_enabled(struct xfs_mount *mp, unsigned int tag);
+#define XFS_ERRORTAG_REPORT(mp, tag) \
+ do { \
+ if (!xfs_errortag_enabled((mp), (tag))) \
+ break; \
+ xfs_warn((mp), \
+"Injected errortag (%s) set to %u at file %s, line %d, on filesystem \"%s\"", \
+ #tag, (mp)->m_errortag[(tag)], \
+ __FILE__, __LINE__, (mp)->m_super->s_id); \
+ } while (0)
+#define XFS_ERRORTAG_DELAY(mp, tag) \
+ do { \
+ if (!xfs_errortag_enabled((mp), (tag))) \
+ break; \
+ xfs_warn_ratelimited((mp), \
+"Injecting %ums delay at file %s, line %d, on filesystem \"%s\"", \
+ (mp)->m_errortag[(tag)], __FILE__, __LINE__, \
+ (mp)->m_super->s_id); \
+ mdelay((mp)->m_errortag[(tag)]); \
+ } while (0)
extern int xfs_errortag_get(struct xfs_mount *mp, unsigned int error_tag);
extern int xfs_errortag_set(struct xfs_mount *mp, unsigned int error_tag,
@@ -55,6 +75,8 @@ extern int xfs_errortag_clearall(struct xfs_mount *mp);
#define xfs_errortag_init(mp) (0)
#define xfs_errortag_del(mp)
#define XFS_TEST_ERROR(expr, mp, tag) (expr)
+#define XFS_ERRORTAG_REPORT(mp, tag) ((void)0)
+#define XFS_ERRORTAG_DELAY(mp, tag) ((void)0)
#define xfs_errortag_set(mp, tag, val) (ENOSYS)
#define xfs_errortag_add(mp, tag) (ENOSYS)
#define xfs_errortag_clearall(mp) (ENOSYS)
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 11/9] xfs: add debug knob to slow down write for fun
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
` (9 preceding siblings ...)
2022-11-28 22:34 ` [PATCH 10/9] xfs: add debug knob to slow down writeback for fun Darrick J. Wong
@ 2022-11-28 22:34 ` Darrick J. Wong
2022-11-29 1:22 ` [PATCH v2 " Darrick J. Wong
10 siblings, 1 reply; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-28 22:34 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel
From: Darrick J. Wong <djwong@kernel.org>
Add a new error injection knob so that we can arbitrarily slow down
pagecahe writes to test for race conditions and aberrant reclaim
behavior if the writeback mechanisms are slow to issue writeback. This
will enable functional testing for the ifork sequence counters
introduced in commit XXXXXXXXXXXX that fixes write racing with reclaim
writeback.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
fs/xfs/libxfs/xfs_errortag.h | 4 +++-
fs/xfs/xfs_error.c | 3 +++
fs/xfs/xfs_iomap.c | 15 +++++++++++++--
3 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_errortag.h b/fs/xfs/libxfs/xfs_errortag.h
index f5f629174eca..01a9e86b3037 100644
--- a/fs/xfs/libxfs/xfs_errortag.h
+++ b/fs/xfs/libxfs/xfs_errortag.h
@@ -62,7 +62,8 @@
#define XFS_ERRTAG_DA_LEAF_SPLIT 40
#define XFS_ERRTAG_ATTR_LEAF_TO_NODE 41
#define XFS_ERRTAG_WB_DELAY_MS 42
-#define XFS_ERRTAG_MAX 43
+#define XFS_ERRTAG_WRITE_DELAY_MS 43
+#define XFS_ERRTAG_MAX 44
/*
* Random factors for above tags, 1 means always, 2 means 1/2 time, etc.
@@ -109,5 +110,6 @@
#define XFS_RANDOM_DA_LEAF_SPLIT 1
#define XFS_RANDOM_ATTR_LEAF_TO_NODE 1
#define XFS_RANDOM_WB_DELAY_MS 3000
+#define XFS_RANDOM_WRITE_DELAY_MS 3000
#endif /* __XFS_ERRORTAG_H_ */
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index 13ac52e7f9e5..d9f9ee969fab 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -61,6 +61,7 @@ static unsigned int xfs_errortag_random_default[] = {
XFS_RANDOM_DA_LEAF_SPLIT,
XFS_RANDOM_ATTR_LEAF_TO_NODE,
XFS_RANDOM_WB_DELAY_MS,
+ XFS_RANDOM_WRITE_DELAY_MS,
};
struct xfs_errortag_attr {
@@ -177,6 +178,7 @@ XFS_ERRORTAG_ATTR_RW(larp, XFS_ERRTAG_LARP);
XFS_ERRORTAG_ATTR_RW(da_leaf_split, XFS_ERRTAG_DA_LEAF_SPLIT);
XFS_ERRORTAG_ATTR_RW(attr_leaf_to_node, XFS_ERRTAG_ATTR_LEAF_TO_NODE);
XFS_ERRORTAG_ATTR_RW(wb_delay_ms, XFS_ERRTAG_WB_DELAY_MS);
+XFS_ERRORTAG_ATTR_RW(write_delay_ms, XFS_ERRTAG_WRITE_DELAY_MS);
static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(noerror),
@@ -221,6 +223,7 @@ static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(da_leaf_split),
XFS_ERRORTAG_ATTR_LIST(attr_leaf_to_node),
XFS_ERRORTAG_ATTR_LIST(wb_delay_ms),
+ XFS_ERRORTAG_ATTR_LIST(write_delay_ms),
NULL,
};
ATTRIBUTE_GROUPS(xfs_errortag);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 1bdd7afc1010..d5e8146d0d50 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -27,6 +27,8 @@
#include "xfs_dquot_item.h"
#include "xfs_dquot.h"
#include "xfs_reflink.h"
+#include "xfs_error.h"
+#include "xfs_errortag.h"
#define XFS_ALLOC_ALIGN(mp, off) \
(((off) >> mp->m_allocsize_log) << mp->m_allocsize_log)
@@ -71,8 +73,17 @@ xfs_iomap_valid(
struct inode *inode,
const struct iomap *iomap)
{
- return iomap->validity_cookie ==
- xfs_iomap_inode_sequence(XFS_I(inode), iomap->flags);
+ struct xfs_inode *ip = XFS_I(inode);
+ struct xfs_mount *mp = ip->i_mount;
+
+ if (iomap->validity_cookie !=
+ xfs_iomap_inode_sequence(ip, iomap->flags)) {
+ XFS_ERRORTAG_REPORT(mp, XFS_ERRTAG_WRITE_DELAY_MS);
+ return false;
+ }
+
+ XFS_ERRORTAG_DELAY(mp, XFS_ERRTAG_WRITE_DELAY_MS);
+ return true;
}
const struct iomap_page_ops xfs_iomap_page_ops = {
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 10/9] xfs: add debug knob to slow down writeback for fun
2022-11-28 22:34 ` [PATCH 10/9] xfs: add debug knob to slow down writeback for fun Darrick J. Wong
@ 2022-11-28 23:30 ` Dave Chinner
2022-11-28 23:39 ` Darrick J. Wong
2022-11-29 1:21 ` [PATCH v2 " Darrick J. Wong
1 sibling, 1 reply; 27+ messages in thread
From: Dave Chinner @ 2022-11-28 23:30 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: linux-xfs, linux-fsdevel
On Mon, Nov 28, 2022 at 02:34:05PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> Add a new error injection knob so that we can arbitrarily slow down
> writeback to test for race conditions and aberrant reclaim behavior if
> the writeback mechanisms are slow to issue writeback. This will enable
> functional testing for the ifork sequence counters introduced in commit
> 745b3f76d1c8 ("xfs: maintain a sequence count for inode fork
> manipulations").
>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
> fs/xfs/libxfs/xfs_errortag.h | 4 +++-
> fs/xfs/xfs_aops.c | 12 ++++++++++--
> fs/xfs/xfs_error.c | 11 +++++++++++
> fs/xfs/xfs_error.h | 22 ++++++++++++++++++++++
> 4 files changed, 46 insertions(+), 3 deletions(-)
>
> diff --git a/fs/xfs/libxfs/xfs_errortag.h b/fs/xfs/libxfs/xfs_errortag.h
> index 580ccbd5aadc..f5f629174eca 100644
> --- a/fs/xfs/libxfs/xfs_errortag.h
> +++ b/fs/xfs/libxfs/xfs_errortag.h
> @@ -61,7 +61,8 @@
> #define XFS_ERRTAG_LARP 39
> #define XFS_ERRTAG_DA_LEAF_SPLIT 40
> #define XFS_ERRTAG_ATTR_LEAF_TO_NODE 41
> -#define XFS_ERRTAG_MAX 42
> +#define XFS_ERRTAG_WB_DELAY_MS 42
> +#define XFS_ERRTAG_MAX 43
>
> /*
> * Random factors for above tags, 1 means always, 2 means 1/2 time, etc.
> @@ -107,5 +108,6 @@
> #define XFS_RANDOM_LARP 1
> #define XFS_RANDOM_DA_LEAF_SPLIT 1
> #define XFS_RANDOM_ATTR_LEAF_TO_NODE 1
> +#define XFS_RANDOM_WB_DELAY_MS 3000
>
> #endif /* __XFS_ERRORTAG_H_ */
> diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
> index a22d90af40c8..4a13260527b9 100644
> --- a/fs/xfs/xfs_aops.c
> +++ b/fs/xfs/xfs_aops.c
> @@ -17,6 +17,8 @@
> #include "xfs_bmap.h"
> #include "xfs_bmap_util.h"
> #include "xfs_reflink.h"
> +#include "xfs_errortag.h"
> +#include "xfs_error.h"
>
> struct xfs_writepage_ctx {
> struct iomap_writepage_ctx ctx;
> @@ -217,11 +219,15 @@ xfs_imap_valid(
> * checked (and found nothing at this offset) could have added
> * overlapping blocks.
> */
> - if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq))
> + if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq)) {
> + XFS_ERRORTAG_REPORT(ip->i_mount, XFS_ERRTAG_WB_DELAY_MS);
> return false;
> + }
> if (xfs_inode_has_cow_data(ip) &&
> - XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq))
> + XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq)) {
> + XFS_ERRORTAG_REPORT(ip->i_mount, XFS_ERRTAG_WB_DELAY_MS);
> return false;
These should be tracepoints, right?
Otherwise I don't see a problem with the delay code.
-Dave.
--
Dave Chinner
david@fromorbit.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 10/9] xfs: add debug knob to slow down writeback for fun
2022-11-28 23:30 ` Dave Chinner
@ 2022-11-28 23:39 ` Darrick J. Wong
0 siblings, 0 replies; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-28 23:39 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel
On Tue, Nov 29, 2022 at 10:30:21AM +1100, Dave Chinner wrote:
> On Mon, Nov 28, 2022 at 02:34:05PM -0800, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@kernel.org>
> >
> > Add a new error injection knob so that we can arbitrarily slow down
> > writeback to test for race conditions and aberrant reclaim behavior if
> > the writeback mechanisms are slow to issue writeback. This will enable
> > functional testing for the ifork sequence counters introduced in commit
> > 745b3f76d1c8 ("xfs: maintain a sequence count for inode fork
> > manipulations").
> >
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > ---
> > fs/xfs/libxfs/xfs_errortag.h | 4 +++-
> > fs/xfs/xfs_aops.c | 12 ++++++++++--
> > fs/xfs/xfs_error.c | 11 +++++++++++
> > fs/xfs/xfs_error.h | 22 ++++++++++++++++++++++
> > 4 files changed, 46 insertions(+), 3 deletions(-)
> >
> > diff --git a/fs/xfs/libxfs/xfs_errortag.h b/fs/xfs/libxfs/xfs_errortag.h
> > index 580ccbd5aadc..f5f629174eca 100644
> > --- a/fs/xfs/libxfs/xfs_errortag.h
> > +++ b/fs/xfs/libxfs/xfs_errortag.h
> > @@ -61,7 +61,8 @@
> > #define XFS_ERRTAG_LARP 39
> > #define XFS_ERRTAG_DA_LEAF_SPLIT 40
> > #define XFS_ERRTAG_ATTR_LEAF_TO_NODE 41
> > -#define XFS_ERRTAG_MAX 42
> > +#define XFS_ERRTAG_WB_DELAY_MS 42
> > +#define XFS_ERRTAG_MAX 43
> >
> > /*
> > * Random factors for above tags, 1 means always, 2 means 1/2 time, etc.
> > @@ -107,5 +108,6 @@
> > #define XFS_RANDOM_LARP 1
> > #define XFS_RANDOM_DA_LEAF_SPLIT 1
> > #define XFS_RANDOM_ATTR_LEAF_TO_NODE 1
> > +#define XFS_RANDOM_WB_DELAY_MS 3000
> >
> > #endif /* __XFS_ERRORTAG_H_ */
> > diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
> > index a22d90af40c8..4a13260527b9 100644
> > --- a/fs/xfs/xfs_aops.c
> > +++ b/fs/xfs/xfs_aops.c
> > @@ -17,6 +17,8 @@
> > #include "xfs_bmap.h"
> > #include "xfs_bmap_util.h"
> > #include "xfs_reflink.h"
> > +#include "xfs_errortag.h"
> > +#include "xfs_error.h"
> >
> > struct xfs_writepage_ctx {
> > struct iomap_writepage_ctx ctx;
> > @@ -217,11 +219,15 @@ xfs_imap_valid(
> > * checked (and found nothing at this offset) could have added
> > * overlapping blocks.
> > */
> > - if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq))
> > + if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq)) {
> > + XFS_ERRORTAG_REPORT(ip->i_mount, XFS_ERRTAG_WB_DELAY_MS);
> > return false;
> > + }
> > if (xfs_inode_has_cow_data(ip) &&
> > - XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq))
> > + XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq)) {
> > + XFS_ERRORTAG_REPORT(ip->i_mount, XFS_ERRTAG_WB_DELAY_MS);
> > return false;
>
> These should be tracepoints, right?
>
> Otherwise I don't see a problem with the delay code.
Yeah. I suppose this'll be the first fstest that has to go wrangle with
setting up its own tracepoint filtering. :)
--D
> -Dave.
> --
> Dave Chinner
> david@fromorbit.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 10/9] xfs: add debug knob to slow down writeback for fun
2022-11-28 22:34 ` [PATCH 10/9] xfs: add debug knob to slow down writeback for fun Darrick J. Wong
2022-11-28 23:30 ` Dave Chinner
@ 2022-11-29 1:21 ` Darrick J. Wong
2022-11-29 1:34 ` Dave Chinner
2022-11-29 21:57 ` [RFC PATCH] xfs: regression test for writeback corruption bug Darrick J. Wong
1 sibling, 2 replies; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-29 1:21 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel
From: Darrick J. Wong <djwong@kernel.org>
Add a new error injection knob so that we can arbitrarily slow down
writeback to test for race conditions and aberrant reclaim behavior if
the writeback mechanisms are slow to issue writeback. This will enable
functional testing for the ifork sequence counters introduced in commit
745b3f76d1c8 ("xfs: maintain a sequence count for inode fork
manipulations").
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
v2: this time with tracepoints
---
fs/xfs/libxfs/xfs_errortag.h | 4 +++-
fs/xfs/xfs_aops.c | 14 +++++++++++--
fs/xfs/xfs_error.c | 11 +++++++++++
fs/xfs/xfs_error.h | 12 +++++++++++
fs/xfs/xfs_trace.c | 2 ++
fs/xfs/xfs_trace.h | 44 ++++++++++++++++++++++++++++++++++++++++++
6 files changed, 84 insertions(+), 3 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_errortag.h b/fs/xfs/libxfs/xfs_errortag.h
index 580ccbd5aadc..f5f629174eca 100644
--- a/fs/xfs/libxfs/xfs_errortag.h
+++ b/fs/xfs/libxfs/xfs_errortag.h
@@ -61,7 +61,8 @@
#define XFS_ERRTAG_LARP 39
#define XFS_ERRTAG_DA_LEAF_SPLIT 40
#define XFS_ERRTAG_ATTR_LEAF_TO_NODE 41
-#define XFS_ERRTAG_MAX 42
+#define XFS_ERRTAG_WB_DELAY_MS 42
+#define XFS_ERRTAG_MAX 43
/*
* Random factors for above tags, 1 means always, 2 means 1/2 time, etc.
@@ -107,5 +108,6 @@
#define XFS_RANDOM_LARP 1
#define XFS_RANDOM_DA_LEAF_SPLIT 1
#define XFS_RANDOM_ATTR_LEAF_TO_NODE 1
+#define XFS_RANDOM_WB_DELAY_MS 3000
#endif /* __XFS_ERRORTAG_H_ */
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index a22d90af40c8..41734202796f 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -17,6 +17,8 @@
#include "xfs_bmap.h"
#include "xfs_bmap_util.h"
#include "xfs_reflink.h"
+#include "xfs_errortag.h"
+#include "xfs_error.h"
struct xfs_writepage_ctx {
struct iomap_writepage_ctx ctx;
@@ -217,11 +219,17 @@ xfs_imap_valid(
* checked (and found nothing at this offset) could have added
* overlapping blocks.
*/
- if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq))
+ if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq)) {
+ trace_xfs_wb_data_iomap_invalid(ip, &wpc->iomap,
+ XFS_WPC(wpc)->data_seq, XFS_DATA_FORK);
return false;
+ }
if (xfs_inode_has_cow_data(ip) &&
- XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq))
+ XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq)) {
+ trace_xfs_wb_cow_iomap_invalid(ip, &wpc->iomap,
+ XFS_WPC(wpc)->cow_seq, XFS_COW_FORK);
return false;
+ }
return true;
}
@@ -285,6 +293,8 @@ xfs_map_blocks(
if (xfs_is_shutdown(mp))
return -EIO;
+ XFS_ERRORTAG_DELAY(mp, XFS_ERRTAG_WB_DELAY_MS);
+
/*
* COW fork blocks can overlap data fork blocks even if the blocks
* aren't shared. COW I/O always takes precedent, so we must always
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index dea3c0649d2f..13ac52e7f9e5 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -60,6 +60,7 @@ static unsigned int xfs_errortag_random_default[] = {
XFS_RANDOM_LARP,
XFS_RANDOM_DA_LEAF_SPLIT,
XFS_RANDOM_ATTR_LEAF_TO_NODE,
+ XFS_RANDOM_WB_DELAY_MS,
};
struct xfs_errortag_attr {
@@ -175,6 +176,7 @@ XFS_ERRORTAG_ATTR_RW(ag_resv_fail, XFS_ERRTAG_AG_RESV_FAIL);
XFS_ERRORTAG_ATTR_RW(larp, XFS_ERRTAG_LARP);
XFS_ERRORTAG_ATTR_RW(da_leaf_split, XFS_ERRTAG_DA_LEAF_SPLIT);
XFS_ERRORTAG_ATTR_RW(attr_leaf_to_node, XFS_ERRTAG_ATTR_LEAF_TO_NODE);
+XFS_ERRORTAG_ATTR_RW(wb_delay_ms, XFS_ERRTAG_WB_DELAY_MS);
static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(noerror),
@@ -218,6 +220,7 @@ static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(larp),
XFS_ERRORTAG_ATTR_LIST(da_leaf_split),
XFS_ERRORTAG_ATTR_LIST(attr_leaf_to_node),
+ XFS_ERRORTAG_ATTR_LIST(wb_delay_ms),
NULL,
};
ATTRIBUTE_GROUPS(xfs_errortag);
@@ -267,6 +270,14 @@ xfs_errortag_valid(
return true;
}
+bool
+xfs_errortag_enabled(
+ struct xfs_mount *mp,
+ unsigned int tag)
+{
+ return mp->m_errortag && mp->m_errortag[tag] != 0;
+}
+
bool
xfs_errortag_test(
struct xfs_mount *mp,
diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
index 5191e9145e55..936d0c52d6af 100644
--- a/fs/xfs/xfs_error.h
+++ b/fs/xfs/xfs_error.h
@@ -45,6 +45,17 @@ extern bool xfs_errortag_test(struct xfs_mount *mp, const char *expression,
const char *file, int line, unsigned int error_tag);
#define XFS_TEST_ERROR(expr, mp, tag) \
((expr) || xfs_errortag_test((mp), #expr, __FILE__, __LINE__, (tag)))
+bool xfs_errortag_enabled(struct xfs_mount *mp, unsigned int tag);
+#define XFS_ERRORTAG_DELAY(mp, tag) \
+ do { \
+ if (!xfs_errortag_enabled((mp), (tag))) \
+ break; \
+ xfs_warn_ratelimited((mp), \
+"Injecting %ums delay at file %s, line %d, on filesystem \"%s\"", \
+ (mp)->m_errortag[(tag)], __FILE__, __LINE__, \
+ (mp)->m_super->s_id); \
+ mdelay((mp)->m_errortag[(tag)]); \
+ } while (0)
extern int xfs_errortag_get(struct xfs_mount *mp, unsigned int error_tag);
extern int xfs_errortag_set(struct xfs_mount *mp, unsigned int error_tag,
@@ -55,6 +66,7 @@ extern int xfs_errortag_clearall(struct xfs_mount *mp);
#define xfs_errortag_init(mp) (0)
#define xfs_errortag_del(mp)
#define XFS_TEST_ERROR(expr, mp, tag) (expr)
+#define XFS_ERRORTAG_DELAY(mp, tag) ((void)0)
#define xfs_errortag_set(mp, tag, val) (ENOSYS)
#define xfs_errortag_add(mp, tag) (ENOSYS)
#define xfs_errortag_clearall(mp) (ENOSYS)
diff --git a/fs/xfs/xfs_trace.c b/fs/xfs/xfs_trace.c
index d269ef57ff01..8a5dc1538aa8 100644
--- a/fs/xfs/xfs_trace.c
+++ b/fs/xfs/xfs_trace.c
@@ -34,6 +34,8 @@
#include "xfs_ag.h"
#include "xfs_ag_resv.h"
#include "xfs_error.h"
+#include <linux/iomap.h>
+#include "xfs_iomap.h"
/*
* We include this last to have the helpers above available for the trace
diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
index 372d871bccc5..c9ada9577a4a 100644
--- a/fs/xfs/xfs_trace.h
+++ b/fs/xfs/xfs_trace.h
@@ -3352,6 +3352,50 @@ DEFINE_EVENT(xfs_inode_irec_class, name, \
TP_PROTO(struct xfs_inode *ip, struct xfs_bmbt_irec *irec), \
TP_ARGS(ip, irec))
+/* inode iomap invalidation events */
+DECLARE_EVENT_CLASS(xfs_wb_invalid_class,
+ TP_PROTO(struct xfs_inode *ip, const struct iomap *iomap, unsigned int wpcseq, int whichfork),
+ TP_ARGS(ip, iomap, wpcseq, whichfork),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(u64, addr)
+ __field(loff_t, pos)
+ __field(u64, len)
+ __field(u16, type)
+ __field(u16, flags)
+ __field(u32, wpcseq)
+ __field(u32, forkseq)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->addr = iomap->addr;
+ __entry->pos = iomap->offset;
+ __entry->len = iomap->length;
+ __entry->type = iomap->type;
+ __entry->flags = iomap->flags;
+ __entry->wpcseq = wpcseq;
+ __entry->forkseq = READ_ONCE(xfs_ifork_ptr(ip, whichfork)->if_seq);
+ ),
+ TP_printk("dev %d:%d ino 0x%llx pos 0x%llx addr 0x%llx bytecount 0x%llx type 0x%x flags 0x%x wpcseq 0x%x forkseq 0x%x",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->pos,
+ __entry->addr,
+ __entry->len,
+ __entry->type,
+ __entry->flags,
+ __entry->wpcseq,
+ __entry->forkseq)
+);
+#define DEFINE_WB_INVALID_EVENT(name) \
+DEFINE_EVENT(xfs_wb_invalid_class, name, \
+ TP_PROTO(struct xfs_inode *ip, const struct iomap *iomap, unsigned int wpcseq, int whichfork), \
+ TP_ARGS(ip, iomap, wpcseq, whichfork))
+DEFINE_WB_INVALID_EVENT(xfs_wb_cow_iomap_invalid);
+DEFINE_WB_INVALID_EVENT(xfs_wb_data_iomap_invalid);
+
/* refcount/reflink tracepoint definitions */
/* reflink tracepoints */
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 11/9] xfs: add debug knob to slow down write for fun
2022-11-28 22:34 ` [PATCH 11/9] xfs: add debug knob to slow down write for fun Darrick J. Wong
@ 2022-11-29 1:22 ` Darrick J. Wong
2022-11-29 1:37 ` Dave Chinner
2022-11-29 21:55 ` [RFC PATCH] xfs: regression test for writes racing with reclaim writeback Darrick J. Wong
0 siblings, 2 replies; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-29 1:22 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel
From: Darrick J. Wong <djwong@kernel.org>
Add a new error injection knob so that we can arbitrarily slow down
pagecahe writes to test for race conditions and aberrant reclaim
behavior if the writeback mechanisms are slow to issue writeback. This
will enable functional testing for the ifork sequence counters
introduced in commit XXXXXXXXXXXX that fixes write racing with reclaim
writeback.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
v2: this time with tracepoints
---
fs/xfs/libxfs/xfs_errortag.h | 4 +++-
fs/xfs/xfs_error.c | 3 +++
fs/xfs/xfs_iomap.c | 14 ++++++++++++--
fs/xfs/xfs_trace.h | 42 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 60 insertions(+), 3 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_errortag.h b/fs/xfs/libxfs/xfs_errortag.h
index f5f629174eca..01a9e86b3037 100644
--- a/fs/xfs/libxfs/xfs_errortag.h
+++ b/fs/xfs/libxfs/xfs_errortag.h
@@ -62,7 +62,8 @@
#define XFS_ERRTAG_DA_LEAF_SPLIT 40
#define XFS_ERRTAG_ATTR_LEAF_TO_NODE 41
#define XFS_ERRTAG_WB_DELAY_MS 42
-#define XFS_ERRTAG_MAX 43
+#define XFS_ERRTAG_WRITE_DELAY_MS 43
+#define XFS_ERRTAG_MAX 44
/*
* Random factors for above tags, 1 means always, 2 means 1/2 time, etc.
@@ -109,5 +110,6 @@
#define XFS_RANDOM_DA_LEAF_SPLIT 1
#define XFS_RANDOM_ATTR_LEAF_TO_NODE 1
#define XFS_RANDOM_WB_DELAY_MS 3000
+#define XFS_RANDOM_WRITE_DELAY_MS 3000
#endif /* __XFS_ERRORTAG_H_ */
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index 13ac52e7f9e5..d9f9ee969fab 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -61,6 +61,7 @@ static unsigned int xfs_errortag_random_default[] = {
XFS_RANDOM_DA_LEAF_SPLIT,
XFS_RANDOM_ATTR_LEAF_TO_NODE,
XFS_RANDOM_WB_DELAY_MS,
+ XFS_RANDOM_WRITE_DELAY_MS,
};
struct xfs_errortag_attr {
@@ -177,6 +178,7 @@ XFS_ERRORTAG_ATTR_RW(larp, XFS_ERRTAG_LARP);
XFS_ERRORTAG_ATTR_RW(da_leaf_split, XFS_ERRTAG_DA_LEAF_SPLIT);
XFS_ERRORTAG_ATTR_RW(attr_leaf_to_node, XFS_ERRTAG_ATTR_LEAF_TO_NODE);
XFS_ERRORTAG_ATTR_RW(wb_delay_ms, XFS_ERRTAG_WB_DELAY_MS);
+XFS_ERRORTAG_ATTR_RW(write_delay_ms, XFS_ERRTAG_WRITE_DELAY_MS);
static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(noerror),
@@ -221,6 +223,7 @@ static struct attribute *xfs_errortag_attrs[] = {
XFS_ERRORTAG_ATTR_LIST(da_leaf_split),
XFS_ERRORTAG_ATTR_LIST(attr_leaf_to_node),
XFS_ERRORTAG_ATTR_LIST(wb_delay_ms),
+ XFS_ERRORTAG_ATTR_LIST(write_delay_ms),
NULL,
};
ATTRIBUTE_GROUPS(xfs_errortag);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 1bdd7afc1010..1005f1e36545 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -27,6 +27,8 @@
#include "xfs_dquot_item.h"
#include "xfs_dquot.h"
#include "xfs_reflink.h"
+#include "xfs_error.h"
+#include "xfs_errortag.h"
#define XFS_ALLOC_ALIGN(mp, off) \
(((off) >> mp->m_allocsize_log) << mp->m_allocsize_log)
@@ -71,8 +73,16 @@ xfs_iomap_valid(
struct inode *inode,
const struct iomap *iomap)
{
- return iomap->validity_cookie ==
- xfs_iomap_inode_sequence(XFS_I(inode), iomap->flags);
+ struct xfs_inode *ip = XFS_I(inode);
+
+ if (iomap->validity_cookie !=
+ xfs_iomap_inode_sequence(ip, iomap->flags)) {
+ trace_xfs_iomap_invalid(ip, iomap);
+ return false;
+ }
+
+ XFS_ERRORTAG_DELAY(ip->i_mount, XFS_ERRTAG_WRITE_DELAY_MS);
+ return true;
}
const struct iomap_page_ops xfs_iomap_page_ops = {
diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
index c9ada9577a4a..421d1e504ac4 100644
--- a/fs/xfs/xfs_trace.h
+++ b/fs/xfs/xfs_trace.h
@@ -3396,6 +3396,48 @@ DEFINE_EVENT(xfs_wb_invalid_class, name, \
DEFINE_WB_INVALID_EVENT(xfs_wb_cow_iomap_invalid);
DEFINE_WB_INVALID_EVENT(xfs_wb_data_iomap_invalid);
+DECLARE_EVENT_CLASS(xfs_iomap_invalid_class,
+ TP_PROTO(struct xfs_inode *ip, const struct iomap *iomap),
+ TP_ARGS(ip, iomap),
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(xfs_ino_t, ino)
+ __field(u64, addr)
+ __field(loff_t, pos)
+ __field(u64, len)
+ __field(u64, validity_cookie)
+ __field(u64, inodeseq)
+ __field(u16, type)
+ __field(u16, flags)
+ ),
+ TP_fast_assign(
+ __entry->dev = VFS_I(ip)->i_sb->s_dev;
+ __entry->ino = ip->i_ino;
+ __entry->addr = iomap->addr;
+ __entry->pos = iomap->offset;
+ __entry->len = iomap->length;
+ __entry->validity_cookie = iomap->validity_cookie;
+ __entry->type = iomap->type;
+ __entry->flags = iomap->flags;
+ __entry->inodeseq = xfs_iomap_inode_sequence(ip, iomap->flags);
+ ),
+ TP_printk("dev %d:%d ino 0x%llx pos 0x%llx addr 0x%llx bytecount 0x%llx type 0x%x flags 0x%x validity_cookie 0x%llx inodeseq 0x%llx",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->ino,
+ __entry->pos,
+ __entry->addr,
+ __entry->len,
+ __entry->type,
+ __entry->flags,
+ __entry->validity_cookie,
+ __entry->inodeseq)
+);
+#define DEFINE_IOMAP_INVALID_EVENT(name) \
+DEFINE_EVENT(xfs_iomap_invalid_class, name, \
+ TP_PROTO(struct xfs_inode *ip, const struct iomap *iomap), \
+ TP_ARGS(ip, iomap))
+DEFINE_IOMAP_INVALID_EVENT(xfs_iomap_invalid);
+
/* refcount/reflink tracepoint definitions */
/* reflink tracepoints */
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH v2 10/9] xfs: add debug knob to slow down writeback for fun
2022-11-29 1:21 ` [PATCH v2 " Darrick J. Wong
@ 2022-11-29 1:34 ` Dave Chinner
2022-11-29 21:53 ` Darrick J. Wong
2022-11-29 21:57 ` [RFC PATCH] xfs: regression test for writeback corruption bug Darrick J. Wong
1 sibling, 1 reply; 27+ messages in thread
From: Dave Chinner @ 2022-11-29 1:34 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: linux-xfs, linux-fsdevel
On Mon, Nov 28, 2022 at 05:21:18PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> Add a new error injection knob so that we can arbitrarily slow down
> writeback to test for race conditions and aberrant reclaim behavior if
> the writeback mechanisms are slow to issue writeback. This will enable
> functional testing for the ifork sequence counters introduced in commit
> 745b3f76d1c8 ("xfs: maintain a sequence count for inode fork
> manipulations").
>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
> v2: this time with tracepoints
> ---
.....
> @@ -267,6 +270,14 @@ xfs_errortag_valid(
> return true;
> }
>
> +bool
> +xfs_errortag_enabled(
> + struct xfs_mount *mp,
> + unsigned int tag)
> +{
> + return mp->m_errortag && mp->m_errortag[tag] != 0;
> +}
Perhaps consider using the new xfs_errortag_valid() helper? i.e.
{
if (!mp->errortag)
return false;
if (!xfs_errortag_valid(tag))
return false;
return mp->m_errortag[tag] != 0;
}
> +
> bool
> xfs_errortag_test(
> struct xfs_mount *mp,
> diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
> index 5191e9145e55..936d0c52d6af 100644
> --- a/fs/xfs/xfs_error.h
> +++ b/fs/xfs/xfs_error.h
> @@ -45,6 +45,17 @@ extern bool xfs_errortag_test(struct xfs_mount *mp, const char *expression,
> const char *file, int line, unsigned int error_tag);
> #define XFS_TEST_ERROR(expr, mp, tag) \
> ((expr) || xfs_errortag_test((mp), #expr, __FILE__, __LINE__, (tag)))
> +bool xfs_errortag_enabled(struct xfs_mount *mp, unsigned int tag);
> +#define XFS_ERRORTAG_DELAY(mp, tag) \
> + do { \
> + if (!xfs_errortag_enabled((mp), (tag))) \
> + break; \
> + xfs_warn_ratelimited((mp), \
> +"Injecting %ums delay at file %s, line %d, on filesystem \"%s\"", \
> + (mp)->m_errortag[(tag)], __FILE__, __LINE__, \
> + (mp)->m_super->s_id); \
> + mdelay((mp)->m_errortag[(tag)]); \
> + } while (0)
Putting a might_sleep() in this macro might be a good idea - that
will catch delays being added inside spin lock contexts...
Other than that, it looks fine.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
--
Dave Chinner
david@fromorbit.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 11/9] xfs: add debug knob to slow down write for fun
2022-11-29 1:22 ` [PATCH v2 " Darrick J. Wong
@ 2022-11-29 1:37 ` Dave Chinner
2022-11-29 21:53 ` Darrick J. Wong
2022-11-29 21:55 ` [RFC PATCH] xfs: regression test for writes racing with reclaim writeback Darrick J. Wong
1 sibling, 1 reply; 27+ messages in thread
From: Dave Chinner @ 2022-11-29 1:37 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: linux-xfs, linux-fsdevel
On Mon, Nov 28, 2022 at 05:22:02PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> Add a new error injection knob so that we can arbitrarily slow down
> pagecahe writes to test for race conditions and aberrant reclaim
pagecache
> behavior if the writeback mechanisms are slow to issue writeback. This
> will enable functional testing for the ifork sequence counters
> introduced in commit XXXXXXXXXXXX that fixes write racing with reclaim
> writeback.
>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
> v2: this time with tracepoints
> ---
Looks OK to me.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
--
Dave Chinner
david@fromorbit.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 10/9] xfs: add debug knob to slow down writeback for fun
2022-11-29 1:34 ` Dave Chinner
@ 2022-11-29 21:53 ` Darrick J. Wong
0 siblings, 0 replies; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-29 21:53 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel
On Tue, Nov 29, 2022 at 12:34:53PM +1100, Dave Chinner wrote:
> On Mon, Nov 28, 2022 at 05:21:18PM -0800, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@kernel.org>
> >
> > Add a new error injection knob so that we can arbitrarily slow down
> > writeback to test for race conditions and aberrant reclaim behavior if
> > the writeback mechanisms are slow to issue writeback. This will enable
> > functional testing for the ifork sequence counters introduced in commit
> > 745b3f76d1c8 ("xfs: maintain a sequence count for inode fork
> > manipulations").
> >
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > ---
> > v2: this time with tracepoints
> > ---
> .....
>
> > @@ -267,6 +270,14 @@ xfs_errortag_valid(
> > return true;
> > }
> >
> > +bool
> > +xfs_errortag_enabled(
> > + struct xfs_mount *mp,
> > + unsigned int tag)
> > +{
> > + return mp->m_errortag && mp->m_errortag[tag] != 0;
> > +}
>
> Perhaps consider using the new xfs_errortag_valid() helper? i.e.
>
> {
> if (!mp->errortag)
> return false;
> if (!xfs_errortag_valid(tag))
> return false;
> return mp->m_errortag[tag] != 0;
Fixed.
> }
>
> > +
> > bool
> > xfs_errortag_test(
> > struct xfs_mount *mp,
> > diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
> > index 5191e9145e55..936d0c52d6af 100644
> > --- a/fs/xfs/xfs_error.h
> > +++ b/fs/xfs/xfs_error.h
> > @@ -45,6 +45,17 @@ extern bool xfs_errortag_test(struct xfs_mount *mp, const char *expression,
> > const char *file, int line, unsigned int error_tag);
> > #define XFS_TEST_ERROR(expr, mp, tag) \
> > ((expr) || xfs_errortag_test((mp), #expr, __FILE__, __LINE__, (tag)))
> > +bool xfs_errortag_enabled(struct xfs_mount *mp, unsigned int tag);
> > +#define XFS_ERRORTAG_DELAY(mp, tag) \
> > + do { \
> > + if (!xfs_errortag_enabled((mp), (tag))) \
> > + break; \
> > + xfs_warn_ratelimited((mp), \
> > +"Injecting %ums delay at file %s, line %d, on filesystem \"%s\"", \
> > + (mp)->m_errortag[(tag)], __FILE__, __LINE__, \
> > + (mp)->m_super->s_id); \
> > + mdelay((mp)->m_errortag[(tag)]); \
> > + } while (0)
>
> Putting a might_sleep() in this macro might be a good idea - that
> will catch delays being added inside spin lock contexts...
Done. Thanks for the review!
--D
> Other than that, it looks fine.
>
> Reviewed-by: Dave Chinner <dchinner@redhat.com>
>
> --
> Dave Chinner
> david@fromorbit.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v2 11/9] xfs: add debug knob to slow down write for fun
2022-11-29 1:37 ` Dave Chinner
@ 2022-11-29 21:53 ` Darrick J. Wong
0 siblings, 0 replies; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-29 21:53 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel
On Tue, Nov 29, 2022 at 12:37:44PM +1100, Dave Chinner wrote:
> On Mon, Nov 28, 2022 at 05:22:02PM -0800, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@kernel.org>
> >
> > Add a new error injection knob so that we can arbitrarily slow down
> > pagecahe writes to test for race conditions and aberrant reclaim
>
> pagecache
Fixed.
--D
> > behavior if the writeback mechanisms are slow to issue writeback. This
> > will enable functional testing for the ifork sequence counters
> > introduced in commit XXXXXXXXXXXX that fixes write racing with reclaim
> > writeback.
> >
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > ---
> > v2: this time with tracepoints
> > ---
>
> Looks OK to me.
>
> Reviewed-by: Dave Chinner <dchinner@redhat.com>
> --
> Dave Chinner
> david@fromorbit.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* [RFC PATCH] xfs: regression test for writes racing with reclaim writeback
2022-11-29 1:22 ` [PATCH v2 " Darrick J. Wong
2022-11-29 1:37 ` Dave Chinner
@ 2022-11-29 21:55 ` Darrick J. Wong
1 sibling, 0 replies; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-29 21:55 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel, fstests
From: Darrick J. Wong <djwong@kernel.org>
This test uses the new write delay debug knobs to set up a slow-moving
write racing with writeback of an unwritten block at the end of the
file range targetted by the slow write. The test succeeds if the file
does not end up corrupt and if the ftrace log captures a message about
the revalidation occurring.
NOTE: I'm not convinced that madvise actually causes the page to be
removed from the pagecache, which means that this is effectively a
functional test for the invalidation, not a corruption reproducer.
On the other hand, the functional test can be done quickly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
This test has been adapted to use the tracepoints defined in the final
version of this patch.
---
tests/xfs/925 | 127 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/925.out | 2 +
2 files changed, 129 insertions(+)
create mode 100755 tests/xfs/925
create mode 100644 tests/xfs/925.out
diff --git a/tests/xfs/925 b/tests/xfs/925
new file mode 100755
index 0000000000..6503377c0f
--- /dev/null
+++ b/tests/xfs/925
@@ -0,0 +1,127 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2022 Oracle. All Rights Reserved.
+#
+# FS QA Test 925
+#
+# This is a regression test for a data corruption bug that existed in iomap's
+# buffered write routines.
+#
+. ./common/preamble
+_begin_fstest auto quick rw
+
+# Import common functions.
+. ./common/inject
+. ./common/tracing
+
+# real QA test starts here
+_cleanup()
+{
+ _ftrace_cleanup
+ cd /
+ rm -r -f $tmp.* $sentryfile $tracefile
+}
+
+# Modify as appropriate.
+_supported_fs xfs
+_require_ftrace
+_require_error_injection
+_require_scratch
+
+_scratch_mkfs >> $seqres.full
+_scratch_mount >> $seqres.full
+
+# This is a pagecache test, so try to disable fsdax mode.
+$XFS_IO_PROG -c 'chattr -x' $SCRATCH_MNT &> $seqres.full
+_require_pagecache_access $SCRATCH_MNT
+
+knob="$(_find_xfs_mountdev_errortag_knob $SCRATCH_DEV "write_delay_ms")"
+test -w "$knob" || _notrun "Kernel does not have write_delay_ms error injector"
+
+blocks=10
+blksz=$(get_page_size)
+filesz=$((blocks * blksz))
+dirty_offset=$(( filesz - 1 ))
+write_len=$(( ( (blocks - 1) * blksz) + 1 ))
+
+# Create a large file with a large unwritten range.
+$XFS_IO_PROG -f -c "falloc 0 $filesz" $SCRATCH_MNT/file >> $seqres.full
+
+# Write the same data to file.compare as we're about to do to file. Do this
+# before slowing down writeback to avoid unnecessary delay.
+_pwrite_byte 0x58 $dirty_offset 1 $SCRATCH_MNT/file.compare >> $seqres.full
+_pwrite_byte 0x57 0 $write_len $SCRATCH_MNT/file.compare >> $seqres.full
+
+# Reinitialize the page cache for this file.
+_scratch_cycle_mount
+
+# Dirty the last page in the range and immediately set the write delay so that
+# any subsequent writes have to wait.
+$XFS_IO_PROG -c "pwrite -S 0x58 $dirty_offset 1" $SCRATCH_MNT/file >> $seqres.full
+write_delay=500
+echo $write_delay > $knob
+curval="$(cat $knob)"
+test "$curval" -eq $write_delay || echo "expected write_delay_ms == $write_delay"
+
+_ftrace_record_events 'xfs_iomap_invalid'
+
+# Start a sentry to look for evidence of the XFS_ERRORTAG_REPORT logging. If
+# we see that, we know we've forced writeback to revalidate a mapping. The
+# test has been successful, so turn off the delay.
+sentryfile=$TEST_DIR/$seq.sentry
+tracefile=$TEST_DIR/$seq.ftrace
+wait_for_errortag() {
+ while [ -e "$sentryfile" ]; do
+ _ftrace_dump | grep iomap_invalid >> "$tracefile"
+ if grep -q iomap_invalid "$tracefile"; then
+ echo 0 > $knob
+ _ftrace_ignore_events
+ break;
+ fi
+ sleep 0.5
+ done
+}
+touch $sentryfile
+wait_for_errortag &
+
+# Start thread 1 + writeback above
+($XFS_IO_PROG -c "pwrite -S 0x57 -b $write_len 0 $write_len" \
+ -c 'bmap -celpv' -c 'bmap -elpv' \
+ $SCRATCH_MNT/file >> $seqres.full; rm -f $sentryfile) &
+sleep 1
+
+# Start thread 2 to simulate reclaim writeback via sync_file_range and fadvise
+# to drop the page cache.
+# -c "fadvise -d $dirty_offset 1" \
+dirty_pageoff=$((filesz - blksz))
+$XFS_IO_PROG -c "sync_range -a -w $dirty_pageoff $blksz" \
+ -c "mmap -r 0 $filesz" \
+ -c "madvise -d 0 $filesz" \
+ -c 'bmap -celpv' -c 'bmap -elpv' \
+ $SCRATCH_MNT/file >> $seqres.full
+wait
+rm -f $sentryfile
+
+cat "$tracefile" >> $seqres.full
+grep -q iomap_invalid "$tracefile"
+saw_invalidation=$?
+
+# Flush everything to disk. If the bug manifests, then after the cycle,
+# file should have stale 0x58 in block 0 because we silently dropped a write.
+_scratch_cycle_mount
+
+if ! cmp -s $SCRATCH_MNT/file $SCRATCH_MNT/file.compare; then
+ echo file and file.compare do not match
+ $XFS_IO_PROG -c 'bmap -celpv' -c 'bmap -elpv' $SCRATCH_MNT/file >> $seqres.full
+ echo file.compare
+ od -tx1 -Ad -c $SCRATCH_MNT/file.compare
+ echo file
+ od -tx1 -Ad -c $SCRATCH_MNT/file
+elif [ $saw_invalidation -ne 0 ]; then
+ # The files matched, but nothing got logged about the revalidation?
+ echo "Expected to hear about write iomap invalidation?"
+fi
+
+echo Silence is golden
+status=0
+exit
diff --git a/tests/xfs/925.out b/tests/xfs/925.out
new file mode 100644
index 0000000000..95088ce8a5
--- /dev/null
+++ b/tests/xfs/925.out
@@ -0,0 +1,2 @@
+QA output created by 925
+Silence is golden
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [RFC PATCH] xfs: regression test for writeback corruption bug
2022-11-29 1:21 ` [PATCH v2 " Darrick J. Wong
2022-11-29 1:34 ` Dave Chinner
@ 2022-11-29 21:57 ` Darrick J. Wong
2022-11-30 17:34 ` Zorro Lang
1 sibling, 1 reply; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-29 21:57 UTC (permalink / raw)
To: Dave Chinner; +Cc: linux-xfs, linux-fsdevel, wen.gang.wang, fstests
From: Darrick J. Wong <djwong@kernel.org>
This is a regression test for a data corruption bug that existed in XFS'
copy on write code between 4.9 and 4.19. The root cause is a
concurrency bug wherein we would drop ILOCK_SHARED after querying the
CoW fork in xfs_map_cow and retake it before querying the data fork in
xfs_map_blocks. See the test description for a lot more details.
Cc: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
common/rc | 15 ++++
common/tracing | 69 +++++++++++++++++
tests/xfs/924 | 215 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/924.out | 2
4 files changed, 301 insertions(+)
create mode 100644 common/tracing
create mode 100755 tests/xfs/924
create mode 100644 tests/xfs/924.out
diff --git a/common/rc b/common/rc
index d71fc0603f..b1b7a3e553 100644
--- a/common/rc
+++ b/common/rc
@@ -3625,6 +3625,21 @@ _check_xflag()
fi
}
+# Make sure the given file access mode is set to use the pagecache. If
+# userspace or kernel don't support statx or STATX_ATTR_DAX, we assume that
+# means pagecache. The sole parameter must be a directory.
+_require_pagecache_access() {
+ local testfile="$1/testfile"
+
+ touch "$testfile"
+ if ! _check_s_dax "$testfile" 0 &>> $seqres.full; then
+ rm -f "$testfile"
+ _notrun 'test requires pagecache access'
+ fi
+
+ rm -f "$testfile"
+}
+
# Check if dax mount options are supported
#
# $1 can be either 'dax=always' or 'dax'
diff --git a/common/tracing b/common/tracing
new file mode 100644
index 0000000000..35e5ed41c2
--- /dev/null
+++ b/common/tracing
@@ -0,0 +1,69 @@
+##/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2022 Oracle. All Rights Reserved.
+#
+# Routines for dealing with ftrace (or any other tracing).
+
+_require_ftrace() {
+ local ftrace_dir="/sys/kernel/debug/tracing/instances/"
+ test -d "$ftrace_dir" || _notrun "kernel does not support ftrace"
+
+ # Give this fstest its own ftrace buffer so that we don't mess up
+ # any other tracers that might be running.
+ FTRACE_DIR="$ftrace_dir/fstests.$seq"
+ test -d "$FTRACE_DIR" && rmdir "$FTRACE_DIR"
+}
+
+_ftrace_cleanup() {
+ if [ -d "$FTRACE_DIR" ]; then
+ _ftrace_ignore_events
+ # Removing an ftrace buffer requires rmdir, even though the
+ # virtual directory contains children.
+ rmdir "$FTRACE_DIR"
+ fi
+}
+
+# Intercept the given events. Arguments may be regular expressions.
+_ftrace_record_events() {
+ local pwd="$PWD"
+
+ test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
+ mkdir "$FTRACE_DIR"
+ cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
+
+ for arg in "$@"; do
+ for tp in */${arg}; do
+ # Replace slashes with semicolons per ftrace convention
+ echo "${tp////:}" >> ../set_event
+ done
+ done
+ cd "$pwd"
+}
+
+# Stop intercepting the given events. If no arguments, stops all events.
+_ftrace_ignore_events() {
+ local pwd="$PWD"
+
+ test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
+ cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
+
+ if [ "$#" -eq 0 ]; then
+ echo > ../set_event
+ else
+ for arg in "$@"; do
+ for tp in */${arg}; do
+ # Replace slashes with semicolons per ftrace convention
+ echo "!${tp////:}" >> ../set_event
+ done
+ done
+ fi
+
+ cd "$pwd"
+}
+
+# Dump whatever was written to the ftrace buffer since the last time this
+# helper was called.
+_ftrace_dump() {
+ test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
+ (cd "$FTRACE_DIR" && cat trace)
+}
diff --git a/tests/xfs/924 b/tests/xfs/924
new file mode 100755
index 0000000000..81f8ba2743
--- /dev/null
+++ b/tests/xfs/924
@@ -0,0 +1,215 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2022 Oracle. All Rights Reserved.
+#
+# FS QA Test 924
+#
+# This is a regression test for a data corruption bug that existed in XFS' copy
+# on write code between 4.9 and 4.19. The root cause is a concurrency bug
+# wherein we would drop ILOCK_SHARED after querying the CoW fork in xfs_map_cow
+# and retake it before querying the data fork in xfs_map_blocks. If a second
+# thread changes the CoW fork mappings between the two calls, it's possible for
+# xfs_map_blocks to return a zero-block mapping, which results in writeback
+# being elided for that block. Elided writeback of dirty data results in
+# silent loss of writes.
+#
+# Worse yet, kernels from that era still used buffer heads, which means that an
+# elided writeback leaves the page clean but the bufferheads dirty. Due to a
+# naïve optimization in mark_buffer_dirty, the SetPageDirty call is elided if
+# the bufferhead is dirty, which means that a subsequent rewrite of the data
+# block will never result in the page being marked dirty, and all subsequent
+# writes are lost.
+#
+# It turns out that Christoph Hellwig unwittingly fixed the race in commit
+# 5c665e5b5af6 ("xfs: remove xfs_map_cow"), and no testcase was ever written.
+# Four years later, we hit it on a production 4.14 kernel. This testcase
+# relies on a debugging knob that introduces artificial delays into writeback.
+#
+# Before the race, the file blocks 0-1 are not shared and blocks 2-5 are
+# shared. There are no extents in CoW fork.
+#
+# Two threads race like this:
+#
+# Thread 1 (writeback block 0) | Thread 2 (write to block 2)
+# ---------------------------------|--------------------------------
+# |
+# 1. Check if block 0 in CoW fork |
+# from xfs_map_cow. |
+# |
+# 2. Block 0 not found in CoW |
+# fork; the block is considered |
+# not shared. |
+# |
+# 3. xfs_map_blocks looks up data |
+# fork to get a map covering |
+# block 0. |
+# |
+# 4. It gets a data fork mapping |
+# for block 0 with length 2. |
+# |
+# | 1. A buffered write to block 2 sees
+# | that it is a shared block and no
+# | extent covers block 2 in CoW fork.
+# |
+# | It creates a new CoW fork mapping.
+# | Due to the cowextsize, the new
+# | extent starts at block 0 with
+# | length 128.
+# |
+# |
+# 5. It lookup CoW fork again to |
+# trim the map (0, 2) to a |
+# shared block boundary. |
+# |
+# 5a. It finds (0, 128) in CoW fork|
+# 5b. It trims the data fork map |
+# from (0, 1) to (0, 0) (!!!) |
+# |
+# 6. The xfs_imap_valid call after |
+# the xfs_map_blocks call checks|
+# if the mapping (0, 0) covers |
+# block 0. The result is "NO". |
+# |
+# 7. Since block 0 has no physical |
+# block mapped, it's not added |
+# to the ioend. This is the |
+# first problem. |
+# |
+# 8. xfs_add_to_ioend usually |
+# clears the bufferhead dirty |
+# flag Because this is skipped,|
+# we leave the page clean with |
+# the associated buffer head(s) |
+# dirty (the second problem). |
+# Now the dirty state is |
+# inconsistent.
+#
+# On newer kernels, this is also a functionality test for the ifork sequence
+# counter because the writeback completions will change the data fork and force
+# revalidations of the wb mapping.
+#
+. ./common/preamble
+_begin_fstest auto quick clone
+
+# Import common functions.
+. ./common/reflink
+. ./common/inject
+. ./common/tracing
+
+# real QA test starts here
+_cleanup()
+{
+ _ftrace_cleanup
+ cd /
+ rm -r -f $tmp.* $sentryfile $tracefile
+}
+
+# Modify as appropriate.
+_supported_fs xfs
+_fixed_by_kernel_commit 5c665e5b5af6 "xfs: remove xfs_map_cow"
+_require_ftrace
+_require_error_injection
+_require_scratch_reflink
+_require_cp_reflink
+
+_scratch_mkfs >> $seqres.full
+_scratch_mount >> $seqres.full
+
+# This is a pagecache test, so try to disable fsdax mode.
+$XFS_IO_PROG -c 'chattr -x' $SCRATCH_MNT &> $seqres.full
+_require_pagecache_access $SCRATCH_MNT
+
+knob="$(_find_xfs_mountdev_errortag_knob $SCRATCH_DEV "wb_delay_ms")"
+test -w "$knob" || _notrun "Kernel does not have wb_delay_ms error injector"
+
+blksz=65536
+_require_congruent_file_oplen $SCRATCH_MNT $blksz
+
+# Make sure we have sufficient extent size to create speculative CoW
+# preallocations.
+$XFS_IO_PROG -c 'cowextsize 1m' $SCRATCH_MNT
+
+# Write out a file with the first two blocks unshared and the rest shared.
+_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file >> $seqres.full
+_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
+sync
+
+_cp_reflink $SCRATCH_MNT/file $SCRATCH_MNT/file.reflink
+
+_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file >> $seqres.full
+_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
+sync
+
+# Avoid creation of large folios on newer kernels by cycling the mount and
+# immediately writing to the page cache.
+_scratch_cycle_mount
+
+# Write the same data to file.compare as we're about to do to file. Do this
+# before slowing down writeback to avoid unnecessary delay.
+_pwrite_byte 0x57 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
+_pwrite_byte 0x56 $((2 * blksz)) $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
+sync
+
+# Introduce a half-second wait to each writeback block mapping call. This
+# gives us a chance to race speculative cow prealloc with writeback.
+wb_delay=500
+echo $wb_delay > $knob
+curval="$(cat $knob)"
+test "$curval" -eq $wb_delay || echo "expected wb_delay_ms == $wb_delay"
+
+_ftrace_record_events 'xfs_wb*iomap_invalid'
+
+# Start thread 1 + writeback above
+$XFS_IO_PROG -c "pwrite -S 0x57 0 $((2 * blksz))" \
+ -c 'bmap -celpv' -c 'bmap -elpv' \
+ -c 'fsync' $SCRATCH_MNT/file >> $seqres.full &
+sleep 1
+
+# Start a sentry to look for evidence of the XFS_ERRORTAG_REPORT logging. If
+# we see that, we know we've forced writeback to revalidate a mapping. The
+# test has been successful, so turn off the delay.
+sentryfile=$TEST_DIR/$seq.sentry
+tracefile=$TEST_DIR/$seq.ftrace
+wait_for_errortag() {
+ while [ -e "$sentryfile" ]; do
+ _ftrace_dump | grep iomap_invalid >> "$tracefile"
+ if grep -q iomap_invalid "$tracefile"; then
+ echo 0 > "$knob"
+ _ftrace_ignore_events
+ break;
+ fi
+ sleep 0.5
+ done
+}
+touch $sentryfile
+wait_for_errortag &
+
+# Start thread 2 to create the cowextsize reservation
+$XFS_IO_PROG -c "pwrite -S 0x56 $((2 * blksz)) $((2 * blksz))" \
+ -c 'bmap -celpv' -c 'bmap -elpv' \
+ -c 'fsync' $SCRATCH_MNT/file >> $seqres.full
+rm -f $sentryfile
+
+cat "$tracefile" >> $seqres.full
+grep -q iomap_invalid "$tracefile"
+saw_invalidation=$?
+
+# Flush everything to disk. If the bug manifests, then after the cycle,
+# file should have stale 0x58 in block 0 because we silently dropped a write.
+_scratch_cycle_mount
+
+if ! cmp -s $SCRATCH_MNT/file $SCRATCH_MNT/file.compare; then
+ echo file and file.compare do not match
+ $XFS_IO_PROG -c 'bmap -celpv' -c 'bmap -elpv' $SCRATCH_MNT/file >> $seqres.full
+ echo file.compare
+ od -tx1 -Ad -c $SCRATCH_MNT/file.compare
+ echo file
+ od -tx1 -Ad -c $SCRATCH_MNT/file
+elif [ $saw_invalidation -ne 0 ]; then
+ # The files matched, but nothing got logged about the revalidation?
+ echo "Expected to hear about writeback iomap invalidations?"
+fi
+
+echo Silence is golden
+status=0
+exit
diff --git a/tests/xfs/924.out b/tests/xfs/924.out
new file mode 100644
index 0000000000..c6655da35a
--- /dev/null
+++ b/tests/xfs/924.out
@@ -0,0 +1,2 @@
+QA output created by 924
+Silence is golden
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [RFC PATCH] xfs: regression test for writeback corruption bug
2022-11-29 21:57 ` [RFC PATCH] xfs: regression test for writeback corruption bug Darrick J. Wong
@ 2022-11-30 17:34 ` Zorro Lang
2022-11-30 19:04 ` Darrick J. Wong
0 siblings, 1 reply; 27+ messages in thread
From: Zorro Lang @ 2022-11-30 17:34 UTC (permalink / raw)
To: Darrick J. Wong
Cc: Dave Chinner, linux-xfs, linux-fsdevel, wen.gang.wang, fstests
On Tue, Nov 29, 2022 at 01:57:14PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> This is a regression test for a data corruption bug that existed in XFS'
> copy on write code between 4.9 and 4.19. The root cause is a
> concurrency bug wherein we would drop ILOCK_SHARED after querying the
> CoW fork in xfs_map_cow and retake it before querying the data fork in
> xfs_map_blocks. See the test description for a lot more details.
>
> Cc: Wengang Wang <wen.gang.wang@oracle.com>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
> common/rc | 15 ++++
> common/tracing | 69 +++++++++++++++++
> tests/xfs/924 | 215 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/924.out | 2
> 4 files changed, 301 insertions(+)
> create mode 100644 common/tracing
> create mode 100755 tests/xfs/924
> create mode 100644 tests/xfs/924.out
>
> diff --git a/common/rc b/common/rc
> index d71fc0603f..b1b7a3e553 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -3625,6 +3625,21 @@ _check_xflag()
> fi
> }
>
> +# Make sure the given file access mode is set to use the pagecache. If
> +# userspace or kernel don't support statx or STATX_ATTR_DAX, we assume that
> +# means pagecache. The sole parameter must be a directory.
> +_require_pagecache_access() {
> + local testfile="$1/testfile"
> +
> + touch "$testfile"
> + if ! _check_s_dax "$testfile" 0 &>> $seqres.full; then
> + rm -f "$testfile"
> + _notrun 'test requires pagecache access'
> + fi
> +
> + rm -f "$testfile"
> +}
> +
> # Check if dax mount options are supported
> #
> # $1 can be either 'dax=always' or 'dax'
> diff --git a/common/tracing b/common/tracing
> new file mode 100644
> index 0000000000..35e5ed41c2
> --- /dev/null
> +++ b/common/tracing
> @@ -0,0 +1,69 @@
> +##/bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2022 Oracle. All Rights Reserved.
> +#
> +# Routines for dealing with ftrace (or any other tracing).
> +
> +_require_ftrace() {
> + local ftrace_dir="/sys/kernel/debug/tracing/instances/"
> + test -d "$ftrace_dir" || _notrun "kernel does not support ftrace"
> +
> + # Give this fstest its own ftrace buffer so that we don't mess up
> + # any other tracers that might be running.
> + FTRACE_DIR="$ftrace_dir/fstests.$seq"
> + test -d "$FTRACE_DIR" && rmdir "$FTRACE_DIR"
> +}
> +
> +_ftrace_cleanup() {
> + if [ -d "$FTRACE_DIR" ]; then
> + _ftrace_ignore_events
> + # Removing an ftrace buffer requires rmdir, even though the
> + # virtual directory contains children.
> + rmdir "$FTRACE_DIR"
> + fi
> +}
> +
> +# Intercept the given events. Arguments may be regular expressions.
> +_ftrace_record_events() {
> + local pwd="$PWD"
> +
> + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> + mkdir "$FTRACE_DIR"
> + cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
> +
> + for arg in "$@"; do
> + for tp in */${arg}; do
> + # Replace slashes with semicolons per ftrace convention
> + echo "${tp////:}" >> ../set_event
> + done
> + done
> + cd "$pwd"
Is the relative path necessary, can we use absolute path at here?
> +}
> +
> +# Stop intercepting the given events. If no arguments, stops all events.
> +_ftrace_ignore_events() {
> + local pwd="$PWD"
> +
> + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> + cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
> +
> + if [ "$#" -eq 0 ]; then
> + echo > ../set_event
> + else
> + for arg in "$@"; do
> + for tp in */${arg}; do
> + # Replace slashes with semicolons per ftrace convention
> + echo "!${tp////:}" >> ../set_event
> + done
> + done
> + fi
> +
> + cd "$pwd"
Same at here
> +}
> +
> +# Dump whatever was written to the ftrace buffer since the last time this
> +# helper was called.
> +_ftrace_dump() {
> + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> + (cd "$FTRACE_DIR" && cat trace)
Why not "cat $FTRACE_DIR/trace" ?
> +}
> diff --git a/tests/xfs/924 b/tests/xfs/924
> new file mode 100755
> index 0000000000..81f8ba2743
> --- /dev/null
> +++ b/tests/xfs/924
> @@ -0,0 +1,215 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2022 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 924
> +#
> +# This is a regression test for a data corruption bug that existed in XFS' copy
> +# on write code between 4.9 and 4.19. The root cause is a concurrency bug
> +# wherein we would drop ILOCK_SHARED after querying the CoW fork in xfs_map_cow
> +# and retake it before querying the data fork in xfs_map_blocks. If a second
> +# thread changes the CoW fork mappings between the two calls, it's possible for
> +# xfs_map_blocks to return a zero-block mapping, which results in writeback
> +# being elided for that block. Elided writeback of dirty data results in
> +# silent loss of writes.
> +#
> +# Worse yet, kernels from that era still used buffer heads, which means that an
> +# elided writeback leaves the page clean but the bufferheads dirty. Due to a
> +# naïve optimization in mark_buffer_dirty, the SetPageDirty call is elided if
> +# the bufferhead is dirty, which means that a subsequent rewrite of the data
> +# block will never result in the page being marked dirty, and all subsequent
> +# writes are lost.
> +#
> +# It turns out that Christoph Hellwig unwittingly fixed the race in commit
> +# 5c665e5b5af6 ("xfs: remove xfs_map_cow"), and no testcase was ever written.
> +# Four years later, we hit it on a production 4.14 kernel. This testcase
> +# relies on a debugging knob that introduces artificial delays into writeback.
> +#
> +# Before the race, the file blocks 0-1 are not shared and blocks 2-5 are
> +# shared. There are no extents in CoW fork.
> +#
> +# Two threads race like this:
> +#
> +# Thread 1 (writeback block 0) | Thread 2 (write to block 2)
> +# ---------------------------------|--------------------------------
> +# |
> +# 1. Check if block 0 in CoW fork |
> +# from xfs_map_cow. |
> +# |
> +# 2. Block 0 not found in CoW |
> +# fork; the block is considered |
> +# not shared. |
> +# |
> +# 3. xfs_map_blocks looks up data |
> +# fork to get a map covering |
> +# block 0. |
> +# |
> +# 4. It gets a data fork mapping |
> +# for block 0 with length 2. |
> +# |
> +# | 1. A buffered write to block 2 sees
> +# | that it is a shared block and no
> +# | extent covers block 2 in CoW fork.
> +# |
> +# | It creates a new CoW fork mapping.
> +# | Due to the cowextsize, the new
> +# | extent starts at block 0 with
> +# | length 128.
> +# |
> +# |
> +# 5. It lookup CoW fork again to |
> +# trim the map (0, 2) to a |
> +# shared block boundary. |
> +# |
> +# 5a. It finds (0, 128) in CoW fork|
> +# 5b. It trims the data fork map |
> +# from (0, 1) to (0, 0) (!!!) |
> +# |
> +# 6. The xfs_imap_valid call after |
> +# the xfs_map_blocks call checks|
> +# if the mapping (0, 0) covers |
> +# block 0. The result is "NO". |
> +# |
> +# 7. Since block 0 has no physical |
> +# block mapped, it's not added |
> +# to the ioend. This is the |
> +# first problem. |
> +# |
> +# 8. xfs_add_to_ioend usually |
> +# clears the bufferhead dirty |
> +# flag Because this is skipped,|
> +# we leave the page clean with |
> +# the associated buffer head(s) |
> +# dirty (the second problem). |
> +# Now the dirty state is |
> +# inconsistent.
> +#
> +# On newer kernels, this is also a functionality test for the ifork sequence
> +# counter because the writeback completions will change the data fork and force
> +# revalidations of the wb mapping.
> +#
> +. ./common/preamble
> +_begin_fstest auto quick clone
> +
> +# Import common functions.
> +. ./common/reflink
> +. ./common/inject
> +. ./common/tracing
> +
> +# real QA test starts here
> +_cleanup()
> +{
> + _ftrace_cleanup
> + cd /
> + rm -r -f $tmp.* $sentryfile $tracefile
> +}
> +
> +# Modify as appropriate.
> +_supported_fs xfs
> +_fixed_by_kernel_commit 5c665e5b5af6 "xfs: remove xfs_map_cow"
> +_require_ftrace
> +_require_error_injection
> +_require_scratch_reflink
> +_require_cp_reflink
> +
> +_scratch_mkfs >> $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +# This is a pagecache test, so try to disable fsdax mode.
> +$XFS_IO_PROG -c 'chattr -x' $SCRATCH_MNT &> $seqres.full
> +_require_pagecache_access $SCRATCH_MNT
> +
> +knob="$(_find_xfs_mountdev_errortag_knob $SCRATCH_DEV "wb_delay_ms")"
> +test -w "$knob" || _notrun "Kernel does not have wb_delay_ms error injector"
Can `_require_xfs_io_error_injection` help that?
> +
> +blksz=65536
> +_require_congruent_file_oplen $SCRATCH_MNT $blksz
> +
> +# Make sure we have sufficient extent size to create speculative CoW
> +# preallocations.
> +$XFS_IO_PROG -c 'cowextsize 1m' $SCRATCH_MNT
> +
> +# Write out a file with the first two blocks unshared and the rest shared.
> +_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file >> $seqres.full
> +_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> +sync
> +
> +_cp_reflink $SCRATCH_MNT/file $SCRATCH_MNT/file.reflink
> +
> +_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file >> $seqres.full
> +_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> +sync
> +
> +# Avoid creation of large folios on newer kernels by cycling the mount and
> +# immediately writing to the page cache.
> +_scratch_cycle_mount
> +
> +# Write the same data to file.compare as we're about to do to file. Do this
> +# before slowing down writeback to avoid unnecessary delay.
> +_pwrite_byte 0x57 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> +_pwrite_byte 0x56 $((2 * blksz)) $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> +sync
> +
> +# Introduce a half-second wait to each writeback block mapping call. This
> +# gives us a chance to race speculative cow prealloc with writeback.
> +wb_delay=500
> +echo $wb_delay > $knob
Oh, you'd like to avoid depending on xfs_io ?
> +curval="$(cat $knob)"
> +test "$curval" -eq $wb_delay || echo "expected wb_delay_ms == $wb_delay"
> +
> +_ftrace_record_events 'xfs_wb*iomap_invalid'
> +
> +# Start thread 1 + writeback above
> +$XFS_IO_PROG -c "pwrite -S 0x57 0 $((2 * blksz))" \
> + -c 'bmap -celpv' -c 'bmap -elpv' \
I didn't find the "bmap -c" option, is it a new option? Won't it break the
golden image if a system doesn't support it?
> + -c 'fsync' $SCRATCH_MNT/file >> $seqres.full &
> +sleep 1
> +
> +# Start a sentry to look for evidence of the XFS_ERRORTAG_REPORT logging. If
> +# we see that, we know we've forced writeback to revalidate a mapping. The
> +# test has been successful, so turn off the delay.
> +sentryfile=$TEST_DIR/$seq.sentry
> +tracefile=$TEST_DIR/$seq.ftrace
> +wait_for_errortag() {
> + while [ -e "$sentryfile" ]; do
> + _ftrace_dump | grep iomap_invalid >> "$tracefile"
> + if grep -q iomap_invalid "$tracefile"; then
> + echo 0 > "$knob"
> + _ftrace_ignore_events
> + break;
> + fi
> + sleep 0.5
> + done
> +}
> +touch $sentryfile
> +wait_for_errortag &
Should we *wait* background processes in cleanup after removing $sentryfile.
> +
> +# Start thread 2 to create the cowextsize reservation
> +$XFS_IO_PROG -c "pwrite -S 0x56 $((2 * blksz)) $((2 * blksz))" \
> + -c 'bmap -celpv' -c 'bmap -elpv' \
> + -c 'fsync' $SCRATCH_MNT/file >> $seqres.full
> +rm -f $sentryfile
> +
> +cat "$tracefile" >> $seqres.full
> +grep -q iomap_invalid "$tracefile"
> +saw_invalidation=$?
> +
> +# Flush everything to disk. If the bug manifests, then after the cycle,
> +# file should have stale 0x58 in block 0 because we silently dropped a write.
> +_scratch_cycle_mount
> +
> +if ! cmp -s $SCRATCH_MNT/file $SCRATCH_MNT/file.compare; then
> + echo file and file.compare do not match
> + $XFS_IO_PROG -c 'bmap -celpv' -c 'bmap -elpv' $SCRATCH_MNT/file >> $seqres.full
> + echo file.compare
> + od -tx1 -Ad -c $SCRATCH_MNT/file.compare
> + echo file
> + od -tx1 -Ad -c $SCRATCH_MNT/file
> +elif [ $saw_invalidation -ne 0 ]; then
> + # The files matched, but nothing got logged about the revalidation?
> + echo "Expected to hear about writeback iomap invalidations?"
> +fi
> +
> +echo Silence is golden
> +status=0
> +exit
> diff --git a/tests/xfs/924.out b/tests/xfs/924.out
> new file mode 100644
> index 0000000000..c6655da35a
> --- /dev/null
> +++ b/tests/xfs/924.out
> @@ -0,0 +1,2 @@
> +QA output created by 924
> +Silence is golden
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [RFC PATCH] xfs: regression test for writeback corruption bug
2022-11-30 17:34 ` Zorro Lang
@ 2022-11-30 19:04 ` Darrick J. Wong
2022-12-01 15:21 ` Zorro Lang
0 siblings, 1 reply; 27+ messages in thread
From: Darrick J. Wong @ 2022-11-30 19:04 UTC (permalink / raw)
To: Zorro Lang; +Cc: Dave Chinner, linux-xfs, linux-fsdevel, wen.gang.wang, fstests
On Thu, Dec 01, 2022 at 01:34:47AM +0800, Zorro Lang wrote:
> On Tue, Nov 29, 2022 at 01:57:14PM -0800, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@kernel.org>
> >
> > This is a regression test for a data corruption bug that existed in XFS'
> > copy on write code between 4.9 and 4.19. The root cause is a
> > concurrency bug wherein we would drop ILOCK_SHARED after querying the
> > CoW fork in xfs_map_cow and retake it before querying the data fork in
> > xfs_map_blocks. See the test description for a lot more details.
> >
> > Cc: Wengang Wang <wen.gang.wang@oracle.com>
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > ---
> > common/rc | 15 ++++
> > common/tracing | 69 +++++++++++++++++
> > tests/xfs/924 | 215 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > tests/xfs/924.out | 2
> > 4 files changed, 301 insertions(+)
> > create mode 100644 common/tracing
> > create mode 100755 tests/xfs/924
> > create mode 100644 tests/xfs/924.out
> >
> > diff --git a/common/rc b/common/rc
> > index d71fc0603f..b1b7a3e553 100644
> > --- a/common/rc
> > +++ b/common/rc
> > @@ -3625,6 +3625,21 @@ _check_xflag()
> > fi
> > }
> >
> > +# Make sure the given file access mode is set to use the pagecache. If
> > +# userspace or kernel don't support statx or STATX_ATTR_DAX, we assume that
> > +# means pagecache. The sole parameter must be a directory.
> > +_require_pagecache_access() {
> > + local testfile="$1/testfile"
> > +
> > + touch "$testfile"
> > + if ! _check_s_dax "$testfile" 0 &>> $seqres.full; then
> > + rm -f "$testfile"
> > + _notrun 'test requires pagecache access'
> > + fi
> > +
> > + rm -f "$testfile"
> > +}
> > +
> > # Check if dax mount options are supported
> > #
> > # $1 can be either 'dax=always' or 'dax'
> > diff --git a/common/tracing b/common/tracing
> > new file mode 100644
> > index 0000000000..35e5ed41c2
> > --- /dev/null
> > +++ b/common/tracing
> > @@ -0,0 +1,69 @@
> > +##/bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2022 Oracle. All Rights Reserved.
> > +#
> > +# Routines for dealing with ftrace (or any other tracing).
> > +
> > +_require_ftrace() {
> > + local ftrace_dir="/sys/kernel/debug/tracing/instances/"
> > + test -d "$ftrace_dir" || _notrun "kernel does not support ftrace"
> > +
> > + # Give this fstest its own ftrace buffer so that we don't mess up
> > + # any other tracers that might be running.
> > + FTRACE_DIR="$ftrace_dir/fstests.$seq"
> > + test -d "$FTRACE_DIR" && rmdir "$FTRACE_DIR"
> > +}
> > +
> > +_ftrace_cleanup() {
> > + if [ -d "$FTRACE_DIR" ]; then
> > + _ftrace_ignore_events
> > + # Removing an ftrace buffer requires rmdir, even though the
> > + # virtual directory contains children.
> > + rmdir "$FTRACE_DIR"
> > + fi
> > +}
> > +
> > +# Intercept the given events. Arguments may be regular expressions.
> > +_ftrace_record_events() {
> > + local pwd="$PWD"
> > +
> > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > + mkdir "$FTRACE_DIR"
> > + cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
> > +
> > + for arg in "$@"; do
> > + for tp in */${arg}; do
> > + # Replace slashes with semicolons per ftrace convention
> > + echo "${tp////:}" >> ../set_event
> > + done
> > + done
> > + cd "$pwd"
>
> Is the relative path necessary, can we use absolute path at here?
Hm. I suppose that inner loop could be replaced by:
find "$FTRACE_DIR/events/ -type d -name "$arg" -printf '%P\n' | \
tr '/' ':' >> "$FTRACE_DIR/set_event"
and then we don't need all this cd'ing insanity. I'll try that and
report back.
> > +}
> > +
> > +# Stop intercepting the given events. If no arguments, stops all events.
> > +_ftrace_ignore_events() {
> > + local pwd="$PWD"
> > +
> > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > + cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
> > +
> > + if [ "$#" -eq 0 ]; then
> > + echo > ../set_event
> > + else
> > + for arg in "$@"; do
> > + for tp in */${arg}; do
> > + # Replace slashes with semicolons per ftrace convention
> > + echo "!${tp////:}" >> ../set_event
> > + done
> > + done
> > + fi
> > +
> > + cd "$pwd"
>
> Same at here
>
> > +}
> > +
> > +# Dump whatever was written to the ftrace buffer since the last time this
> > +# helper was called.
> > +_ftrace_dump() {
> > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > + (cd "$FTRACE_DIR" && cat trace)
>
> Why not "cat $FTRACE_DIR/trace" ?
Fixed.
> > +}
> > diff --git a/tests/xfs/924 b/tests/xfs/924
> > new file mode 100755
> > index 0000000000..81f8ba2743
> > --- /dev/null
> > +++ b/tests/xfs/924
> > @@ -0,0 +1,215 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2022 Oracle. All Rights Reserved.
> > +#
> > +# FS QA Test 924
> > +#
> > +# This is a regression test for a data corruption bug that existed in XFS' copy
> > +# on write code between 4.9 and 4.19. The root cause is a concurrency bug
> > +# wherein we would drop ILOCK_SHARED after querying the CoW fork in xfs_map_cow
> > +# and retake it before querying the data fork in xfs_map_blocks. If a second
> > +# thread changes the CoW fork mappings between the two calls, it's possible for
> > +# xfs_map_blocks to return a zero-block mapping, which results in writeback
> > +# being elided for that block. Elided writeback of dirty data results in
> > +# silent loss of writes.
> > +#
> > +# Worse yet, kernels from that era still used buffer heads, which means that an
> > +# elided writeback leaves the page clean but the bufferheads dirty. Due to a
> > +# naïve optimization in mark_buffer_dirty, the SetPageDirty call is elided if
> > +# the bufferhead is dirty, which means that a subsequent rewrite of the data
> > +# block will never result in the page being marked dirty, and all subsequent
> > +# writes are lost.
> > +#
> > +# It turns out that Christoph Hellwig unwittingly fixed the race in commit
> > +# 5c665e5b5af6 ("xfs: remove xfs_map_cow"), and no testcase was ever written.
> > +# Four years later, we hit it on a production 4.14 kernel. This testcase
> > +# relies on a debugging knob that introduces artificial delays into writeback.
> > +#
> > +# Before the race, the file blocks 0-1 are not shared and blocks 2-5 are
> > +# shared. There are no extents in CoW fork.
> > +#
> > +# Two threads race like this:
> > +#
> > +# Thread 1 (writeback block 0) | Thread 2 (write to block 2)
> > +# ---------------------------------|--------------------------------
> > +# |
> > +# 1. Check if block 0 in CoW fork |
> > +# from xfs_map_cow. |
> > +# |
> > +# 2. Block 0 not found in CoW |
> > +# fork; the block is considered |
> > +# not shared. |
> > +# |
> > +# 3. xfs_map_blocks looks up data |
> > +# fork to get a map covering |
> > +# block 0. |
> > +# |
> > +# 4. It gets a data fork mapping |
> > +# for block 0 with length 2. |
> > +# |
> > +# | 1. A buffered write to block 2 sees
> > +# | that it is a shared block and no
> > +# | extent covers block 2 in CoW fork.
> > +# |
> > +# | It creates a new CoW fork mapping.
> > +# | Due to the cowextsize, the new
> > +# | extent starts at block 0 with
> > +# | length 128.
> > +# |
> > +# |
> > +# 5. It lookup CoW fork again to |
> > +# trim the map (0, 2) to a |
> > +# shared block boundary. |
> > +# |
> > +# 5a. It finds (0, 128) in CoW fork|
> > +# 5b. It trims the data fork map |
> > +# from (0, 1) to (0, 0) (!!!) |
> > +# |
> > +# 6. The xfs_imap_valid call after |
> > +# the xfs_map_blocks call checks|
> > +# if the mapping (0, 0) covers |
> > +# block 0. The result is "NO". |
> > +# |
> > +# 7. Since block 0 has no physical |
> > +# block mapped, it's not added |
> > +# to the ioend. This is the |
> > +# first problem. |
> > +# |
> > +# 8. xfs_add_to_ioend usually |
> > +# clears the bufferhead dirty |
> > +# flag Because this is skipped,|
> > +# we leave the page clean with |
> > +# the associated buffer head(s) |
> > +# dirty (the second problem). |
> > +# Now the dirty state is |
> > +# inconsistent.
> > +#
> > +# On newer kernels, this is also a functionality test for the ifork sequence
> > +# counter because the writeback completions will change the data fork and force
> > +# revalidations of the wb mapping.
> > +#
> > +. ./common/preamble
> > +_begin_fstest auto quick clone
> > +
> > +# Import common functions.
> > +. ./common/reflink
> > +. ./common/inject
> > +. ./common/tracing
> > +
> > +# real QA test starts here
> > +_cleanup()
> > +{
> > + _ftrace_cleanup
> > + cd /
> > + rm -r -f $tmp.* $sentryfile $tracefile
> > +}
> > +
> > +# Modify as appropriate.
> > +_supported_fs xfs
> > +_fixed_by_kernel_commit 5c665e5b5af6 "xfs: remove xfs_map_cow"
> > +_require_ftrace
> > +_require_error_injection
> > +_require_scratch_reflink
> > +_require_cp_reflink
> > +
> > +_scratch_mkfs >> $seqres.full
> > +_scratch_mount >> $seqres.full
> > +
> > +# This is a pagecache test, so try to disable fsdax mode.
> > +$XFS_IO_PROG -c 'chattr -x' $SCRATCH_MNT &> $seqres.full
> > +_require_pagecache_access $SCRATCH_MNT
> > +
> > +knob="$(_find_xfs_mountdev_errortag_knob $SCRATCH_DEV "wb_delay_ms")"
> > +test -w "$knob" || _notrun "Kernel does not have wb_delay_ms error injector"
>
> Can `_require_xfs_io_error_injection` help that?
>
> > +
> > +blksz=65536
> > +_require_congruent_file_oplen $SCRATCH_MNT $blksz
> > +
> > +# Make sure we have sufficient extent size to create speculative CoW
> > +# preallocations.
> > +$XFS_IO_PROG -c 'cowextsize 1m' $SCRATCH_MNT
> > +
> > +# Write out a file with the first two blocks unshared and the rest shared.
> > +_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file >> $seqres.full
> > +_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > +sync
> > +
> > +_cp_reflink $SCRATCH_MNT/file $SCRATCH_MNT/file.reflink
> > +
> > +_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file >> $seqres.full
> > +_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > +sync
> > +
> > +# Avoid creation of large folios on newer kernels by cycling the mount and
> > +# immediately writing to the page cache.
> > +_scratch_cycle_mount
> > +
> > +# Write the same data to file.compare as we're about to do to file. Do this
> > +# before slowing down writeback to avoid unnecessary delay.
> > +_pwrite_byte 0x57 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > +_pwrite_byte 0x56 $((2 * blksz)) $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > +sync
> > +
> > +# Introduce a half-second wait to each writeback block mapping call. This
> > +# gives us a chance to race speculative cow prealloc with writeback.
> > +wb_delay=500
> > +echo $wb_delay > $knob
>
> Oh, you'd like to avoid depending on xfs_io ?
Oops, this was leftover from before I ported the xfs_errortag.h changes
to xfsprogs.
> > +curval="$(cat $knob)"
> > +test "$curval" -eq $wb_delay || echo "expected wb_delay_ms == $wb_delay"
> > +
> > +_ftrace_record_events 'xfs_wb*iomap_invalid'
> > +
> > +# Start thread 1 + writeback above
> > +$XFS_IO_PROG -c "pwrite -S 0x57 0 $((2 * blksz))" \
> > + -c 'bmap -celpv' -c 'bmap -elpv' \
>
> I didn't find the "bmap -c" option, is it a new option? Won't it break the
> golden image if a system doesn't support it?
-c is a deliberately undocumented option to the bmap command; it's been
there since the introduction of reflink.
> > + -c 'fsync' $SCRATCH_MNT/file >> $seqres.full &
> > +sleep 1
> > +
> > +# Start a sentry to look for evidence of the XFS_ERRORTAG_REPORT logging. If
> > +# we see that, we know we've forced writeback to revalidate a mapping. The
> > +# test has been successful, so turn off the delay.
> > +sentryfile=$TEST_DIR/$seq.sentry
> > +tracefile=$TEST_DIR/$seq.ftrace
> > +wait_for_errortag() {
> > + while [ -e "$sentryfile" ]; do
> > + _ftrace_dump | grep iomap_invalid >> "$tracefile"
> > + if grep -q iomap_invalid "$tracefile"; then
> > + echo 0 > "$knob"
> > + _ftrace_ignore_events
> > + break;
> > + fi
> > + sleep 0.5
> > + done
> > +}
> > +touch $sentryfile
> > +wait_for_errortag &
>
> Should we *wait* background processes in cleanup after removing $sentryfile.
Yes.
> > +
> > +# Start thread 2 to create the cowextsize reservation
> > +$XFS_IO_PROG -c "pwrite -S 0x56 $((2 * blksz)) $((2 * blksz))" \
> > + -c 'bmap -celpv' -c 'bmap -elpv' \
> > + -c 'fsync' $SCRATCH_MNT/file >> $seqres.full
> > +rm -f $sentryfile
> > +
> > +cat "$tracefile" >> $seqres.full
> > +grep -q iomap_invalid "$tracefile"
> > +saw_invalidation=$?
> > +
> > +# Flush everything to disk. If the bug manifests, then after the cycle,
> > +# file should have stale 0x58 in block 0 because we silently dropped a write.
> > +_scratch_cycle_mount
> > +
> > +if ! cmp -s $SCRATCH_MNT/file $SCRATCH_MNT/file.compare; then
> > + echo file and file.compare do not match
> > + $XFS_IO_PROG -c 'bmap -celpv' -c 'bmap -elpv' $SCRATCH_MNT/file >> $seqres.full
> > + echo file.compare
> > + od -tx1 -Ad -c $SCRATCH_MNT/file.compare
> > + echo file
> > + od -tx1 -Ad -c $SCRATCH_MNT/file
> > +elif [ $saw_invalidation -ne 0 ]; then
> > + # The files matched, but nothing got logged about the revalidation?
> > + echo "Expected to hear about writeback iomap invalidations?"
> > +fi
> > +
> > +echo Silence is golden
> > +status=0
> > +exit
> > diff --git a/tests/xfs/924.out b/tests/xfs/924.out
> > new file mode 100644
> > index 0000000000..c6655da35a
> > --- /dev/null
> > +++ b/tests/xfs/924.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 924
> > +Silence is golden
> >
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [RFC PATCH] xfs: regression test for writeback corruption bug
2022-11-30 19:04 ` Darrick J. Wong
@ 2022-12-01 15:21 ` Zorro Lang
2022-12-01 15:53 ` Darrick J. Wong
0 siblings, 1 reply; 27+ messages in thread
From: Zorro Lang @ 2022-12-01 15:21 UTC (permalink / raw)
To: Darrick J. Wong
Cc: Dave Chinner, linux-xfs, linux-fsdevel, wen.gang.wang, fstests
On Wed, Nov 30, 2022 at 11:04:18AM -0800, Darrick J. Wong wrote:
> On Thu, Dec 01, 2022 at 01:34:47AM +0800, Zorro Lang wrote:
> > On Tue, Nov 29, 2022 at 01:57:14PM -0800, Darrick J. Wong wrote:
> > > From: Darrick J. Wong <djwong@kernel.org>
> > >
> > > This is a regression test for a data corruption bug that existed in XFS'
> > > copy on write code between 4.9 and 4.19. The root cause is a
> > > concurrency bug wherein we would drop ILOCK_SHARED after querying the
> > > CoW fork in xfs_map_cow and retake it before querying the data fork in
> > > xfs_map_blocks. See the test description for a lot more details.
> > >
> > > Cc: Wengang Wang <wen.gang.wang@oracle.com>
> > > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > > ---
> > > common/rc | 15 ++++
> > > common/tracing | 69 +++++++++++++++++
> > > tests/xfs/924 | 215 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > tests/xfs/924.out | 2
> > > 4 files changed, 301 insertions(+)
> > > create mode 100644 common/tracing
> > > create mode 100755 tests/xfs/924
> > > create mode 100644 tests/xfs/924.out
> > >
> > > diff --git a/common/rc b/common/rc
> > > index d71fc0603f..b1b7a3e553 100644
> > > --- a/common/rc
> > > +++ b/common/rc
> > > @@ -3625,6 +3625,21 @@ _check_xflag()
> > > fi
> > > }
> > >
> > > +# Make sure the given file access mode is set to use the pagecache. If
> > > +# userspace or kernel don't support statx or STATX_ATTR_DAX, we assume that
> > > +# means pagecache. The sole parameter must be a directory.
> > > +_require_pagecache_access() {
> > > + local testfile="$1/testfile"
> > > +
> > > + touch "$testfile"
> > > + if ! _check_s_dax "$testfile" 0 &>> $seqres.full; then
> > > + rm -f "$testfile"
> > > + _notrun 'test requires pagecache access'
> > > + fi
> > > +
> > > + rm -f "$testfile"
> > > +}
> > > +
> > > # Check if dax mount options are supported
> > > #
> > > # $1 can be either 'dax=always' or 'dax'
> > > diff --git a/common/tracing b/common/tracing
> > > new file mode 100644
> > > index 0000000000..35e5ed41c2
> > > --- /dev/null
> > > +++ b/common/tracing
> > > @@ -0,0 +1,69 @@
> > > +##/bin/bash
> > > +# SPDX-License-Identifier: GPL-2.0-or-later
> > > +# Copyright (c) 2022 Oracle. All Rights Reserved.
> > > +#
> > > +# Routines for dealing with ftrace (or any other tracing).
> > > +
> > > +_require_ftrace() {
> > > + local ftrace_dir="/sys/kernel/debug/tracing/instances/"
> > > + test -d "$ftrace_dir" || _notrun "kernel does not support ftrace"
> > > +
> > > + # Give this fstest its own ftrace buffer so that we don't mess up
> > > + # any other tracers that might be running.
> > > + FTRACE_DIR="$ftrace_dir/fstests.$seq"
> > > + test -d "$FTRACE_DIR" && rmdir "$FTRACE_DIR"
> > > +}
> > > +
> > > +_ftrace_cleanup() {
> > > + if [ -d "$FTRACE_DIR" ]; then
> > > + _ftrace_ignore_events
> > > + # Removing an ftrace buffer requires rmdir, even though the
> > > + # virtual directory contains children.
> > > + rmdir "$FTRACE_DIR"
> > > + fi
> > > +}
> > > +
> > > +# Intercept the given events. Arguments may be regular expressions.
> > > +_ftrace_record_events() {
> > > + local pwd="$PWD"
> > > +
> > > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > > + mkdir "$FTRACE_DIR"
> > > + cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
> > > +
> > > + for arg in "$@"; do
> > > + for tp in */${arg}; do
> > > + # Replace slashes with semicolons per ftrace convention
> > > + echo "${tp////:}" >> ../set_event
> > > + done
> > > + done
> > > + cd "$pwd"
> >
> > Is the relative path necessary, can we use absolute path at here?
>
> Hm. I suppose that inner loop could be replaced by:
>
> find "$FTRACE_DIR/events/ -type d -name "$arg" -printf '%P\n' | \
> tr '/' ':' >> "$FTRACE_DIR/set_event"
>
> and then we don't need all this cd'ing insanity. I'll try that and
> report back.
>
> > > +}
> > > +
> > > +# Stop intercepting the given events. If no arguments, stops all events.
> > > +_ftrace_ignore_events() {
> > > + local pwd="$PWD"
> > > +
> > > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > > + cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
> > > +
> > > + if [ "$#" -eq 0 ]; then
> > > + echo > ../set_event
> > > + else
> > > + for arg in "$@"; do
> > > + for tp in */${arg}; do
> > > + # Replace slashes with semicolons per ftrace convention
> > > + echo "!${tp////:}" >> ../set_event
> > > + done
> > > + done
> > > + fi
> > > +
> > > + cd "$pwd"
> >
> > Same at here
> >
> > > +}
> > > +
> > > +# Dump whatever was written to the ftrace buffer since the last time this
> > > +# helper was called.
> > > +_ftrace_dump() {
> > > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > > + (cd "$FTRACE_DIR" && cat trace)
> >
> > Why not "cat $FTRACE_DIR/trace" ?
>
> Fixed.
>
> > > +}
> > > diff --git a/tests/xfs/924 b/tests/xfs/924
> > > new file mode 100755
> > > index 0000000000..81f8ba2743
> > > --- /dev/null
> > > +++ b/tests/xfs/924
> > > @@ -0,0 +1,215 @@
> > > +#! /bin/bash
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +# Copyright (c) 2022 Oracle. All Rights Reserved.
> > > +#
> > > +# FS QA Test 924
> > > +#
> > > +# This is a regression test for a data corruption bug that existed in XFS' copy
> > > +# on write code between 4.9 and 4.19. The root cause is a concurrency bug
> > > +# wherein we would drop ILOCK_SHARED after querying the CoW fork in xfs_map_cow
> > > +# and retake it before querying the data fork in xfs_map_blocks. If a second
> > > +# thread changes the CoW fork mappings between the two calls, it's possible for
> > > +# xfs_map_blocks to return a zero-block mapping, which results in writeback
> > > +# being elided for that block. Elided writeback of dirty data results in
> > > +# silent loss of writes.
> > > +#
> > > +# Worse yet, kernels from that era still used buffer heads, which means that an
> > > +# elided writeback leaves the page clean but the bufferheads dirty. Due to a
> > > +# naïve optimization in mark_buffer_dirty, the SetPageDirty call is elided if
> > > +# the bufferhead is dirty, which means that a subsequent rewrite of the data
> > > +# block will never result in the page being marked dirty, and all subsequent
> > > +# writes are lost.
> > > +#
> > > +# It turns out that Christoph Hellwig unwittingly fixed the race in commit
> > > +# 5c665e5b5af6 ("xfs: remove xfs_map_cow"), and no testcase was ever written.
> > > +# Four years later, we hit it on a production 4.14 kernel. This testcase
> > > +# relies on a debugging knob that introduces artificial delays into writeback.
> > > +#
> > > +# Before the race, the file blocks 0-1 are not shared and blocks 2-5 are
> > > +# shared. There are no extents in CoW fork.
> > > +#
> > > +# Two threads race like this:
> > > +#
> > > +# Thread 1 (writeback block 0) | Thread 2 (write to block 2)
> > > +# ---------------------------------|--------------------------------
> > > +# |
> > > +# 1. Check if block 0 in CoW fork |
> > > +# from xfs_map_cow. |
> > > +# |
> > > +# 2. Block 0 not found in CoW |
> > > +# fork; the block is considered |
> > > +# not shared. |
> > > +# |
> > > +# 3. xfs_map_blocks looks up data |
> > > +# fork to get a map covering |
> > > +# block 0. |
> > > +# |
> > > +# 4. It gets a data fork mapping |
> > > +# for block 0 with length 2. |
> > > +# |
> > > +# | 1. A buffered write to block 2 sees
> > > +# | that it is a shared block and no
> > > +# | extent covers block 2 in CoW fork.
> > > +# |
> > > +# | It creates a new CoW fork mapping.
> > > +# | Due to the cowextsize, the new
> > > +# | extent starts at block 0 with
> > > +# | length 128.
> > > +# |
> > > +# |
> > > +# 5. It lookup CoW fork again to |
> > > +# trim the map (0, 2) to a |
> > > +# shared block boundary. |
> > > +# |
> > > +# 5a. It finds (0, 128) in CoW fork|
> > > +# 5b. It trims the data fork map |
> > > +# from (0, 1) to (0, 0) (!!!) |
> > > +# |
> > > +# 6. The xfs_imap_valid call after |
> > > +# the xfs_map_blocks call checks|
> > > +# if the mapping (0, 0) covers |
> > > +# block 0. The result is "NO". |
> > > +# |
> > > +# 7. Since block 0 has no physical |
> > > +# block mapped, it's not added |
> > > +# to the ioend. This is the |
> > > +# first problem. |
> > > +# |
> > > +# 8. xfs_add_to_ioend usually |
> > > +# clears the bufferhead dirty |
> > > +# flag Because this is skipped,|
> > > +# we leave the page clean with |
> > > +# the associated buffer head(s) |
> > > +# dirty (the second problem). |
> > > +# Now the dirty state is |
> > > +# inconsistent.
> > > +#
> > > +# On newer kernels, this is also a functionality test for the ifork sequence
> > > +# counter because the writeback completions will change the data fork and force
> > > +# revalidations of the wb mapping.
> > > +#
> > > +. ./common/preamble
> > > +_begin_fstest auto quick clone
> > > +
> > > +# Import common functions.
> > > +. ./common/reflink
> > > +. ./common/inject
> > > +. ./common/tracing
> > > +
> > > +# real QA test starts here
> > > +_cleanup()
> > > +{
> > > + _ftrace_cleanup
> > > + cd /
> > > + rm -r -f $tmp.* $sentryfile $tracefile
> > > +}
> > > +
> > > +# Modify as appropriate.
> > > +_supported_fs xfs
> > > +_fixed_by_kernel_commit 5c665e5b5af6 "xfs: remove xfs_map_cow"
> > > +_require_ftrace
> > > +_require_error_injection
> > > +_require_scratch_reflink
> > > +_require_cp_reflink
> > > +
> > > +_scratch_mkfs >> $seqres.full
> > > +_scratch_mount >> $seqres.full
> > > +
> > > +# This is a pagecache test, so try to disable fsdax mode.
> > > +$XFS_IO_PROG -c 'chattr -x' $SCRATCH_MNT &> $seqres.full
> > > +_require_pagecache_access $SCRATCH_MNT
> > > +
> > > +knob="$(_find_xfs_mountdev_errortag_knob $SCRATCH_DEV "wb_delay_ms")"
> > > +test -w "$knob" || _notrun "Kernel does not have wb_delay_ms error injector"
> >
> > Can `_require_xfs_io_error_injection` help that?
> >
> > > +
> > > +blksz=65536
> > > +_require_congruent_file_oplen $SCRATCH_MNT $blksz
> > > +
> > > +# Make sure we have sufficient extent size to create speculative CoW
> > > +# preallocations.
> > > +$XFS_IO_PROG -c 'cowextsize 1m' $SCRATCH_MNT
> > > +
> > > +# Write out a file with the first two blocks unshared and the rest shared.
> > > +_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file >> $seqres.full
> > > +_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > > +sync
> > > +
> > > +_cp_reflink $SCRATCH_MNT/file $SCRATCH_MNT/file.reflink
> > > +
> > > +_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file >> $seqres.full
> > > +_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > > +sync
> > > +
> > > +# Avoid creation of large folios on newer kernels by cycling the mount and
> > > +# immediately writing to the page cache.
> > > +_scratch_cycle_mount
> > > +
> > > +# Write the same data to file.compare as we're about to do to file. Do this
> > > +# before slowing down writeback to avoid unnecessary delay.
> > > +_pwrite_byte 0x57 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > > +_pwrite_byte 0x56 $((2 * blksz)) $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > > +sync
> > > +
> > > +# Introduce a half-second wait to each writeback block mapping call. This
> > > +# gives us a chance to race speculative cow prealloc with writeback.
> > > +wb_delay=500
> > > +echo $wb_delay > $knob
> >
> > Oh, you'd like to avoid depending on xfs_io ?
>
> Oops, this was leftover from before I ported the xfs_errortag.h changes
> to xfsprogs.
>
> > > +curval="$(cat $knob)"
> > > +test "$curval" -eq $wb_delay || echo "expected wb_delay_ms == $wb_delay"
> > > +
> > > +_ftrace_record_events 'xfs_wb*iomap_invalid'
> > > +
> > > +# Start thread 1 + writeback above
> > > +$XFS_IO_PROG -c "pwrite -S 0x57 0 $((2 * blksz))" \
> > > + -c 'bmap -celpv' -c 'bmap -elpv' \
> >
> > I didn't find the "bmap -c" option, is it a new option? Won't it break the
> > golden image if a system doesn't support it?
>
> -c is a deliberately undocumented option to the bmap command; it's been
> there since the introduction of reflink.
But when I tried that on rhel8 with a varietal ersion of xfsprogs 5.0.0
(xfsprogs-5.0.0-10.el8), I got below error output:
# xfs_io -c "bmap -celpv" testfile >/dev/null
xfs_io: xfsctl(XFS_IOC_GETBMAPX) iflags=0x28 ["testfile"]: Invalid argument
# xfs_io -c "bmap -c" testfile >/dev/null
xfs_io: xfsctl(XFS_IOC_GETBMAPX) iflags=0x28 ["testfile"]: Invalid argument
# xfs_io -c "bmap -elpv" testfile >/dev/null
(no error output)
So, maybe, if you don't need this output to be golden image, how about filter
out the error output to $seqres.full too? Or any better idea?
Thanks,
Zorro
>
> > > + -c 'fsync' $SCRATCH_MNT/file >> $seqres.full &
> > > +sleep 1
> > > +
> > > +# Start a sentry to look for evidence of the XFS_ERRORTAG_REPORT logging. If
> > > +# we see that, we know we've forced writeback to revalidate a mapping. The
> > > +# test has been successful, so turn off the delay.
> > > +sentryfile=$TEST_DIR/$seq.sentry
> > > +tracefile=$TEST_DIR/$seq.ftrace
> > > +wait_for_errortag() {
> > > + while [ -e "$sentryfile" ]; do
> > > + _ftrace_dump | grep iomap_invalid >> "$tracefile"
> > > + if grep -q iomap_invalid "$tracefile"; then
> > > + echo 0 > "$knob"
> > > + _ftrace_ignore_events
> > > + break;
> > > + fi
> > > + sleep 0.5
> > > + done
> > > +}
> > > +touch $sentryfile
> > > +wait_for_errortag &
> >
> > Should we *wait* background processes in cleanup after removing $sentryfile.
>
> Yes.
>
> > > +
> > > +# Start thread 2 to create the cowextsize reservation
> > > +$XFS_IO_PROG -c "pwrite -S 0x56 $((2 * blksz)) $((2 * blksz))" \
> > > + -c 'bmap -celpv' -c 'bmap -elpv' \
> > > + -c 'fsync' $SCRATCH_MNT/file >> $seqres.full
> > > +rm -f $sentryfile
> > > +
> > > +cat "$tracefile" >> $seqres.full
> > > +grep -q iomap_invalid "$tracefile"
> > > +saw_invalidation=$?
> > > +
> > > +# Flush everything to disk. If the bug manifests, then after the cycle,
> > > +# file should have stale 0x58 in block 0 because we silently dropped a write.
> > > +_scratch_cycle_mount
> > > +
> > > +if ! cmp -s $SCRATCH_MNT/file $SCRATCH_MNT/file.compare; then
> > > + echo file and file.compare do not match
> > > + $XFS_IO_PROG -c 'bmap -celpv' -c 'bmap -elpv' $SCRATCH_MNT/file >> $seqres.full
> > > + echo file.compare
> > > + od -tx1 -Ad -c $SCRATCH_MNT/file.compare
> > > + echo file
> > > + od -tx1 -Ad -c $SCRATCH_MNT/file
> > > +elif [ $saw_invalidation -ne 0 ]; then
> > > + # The files matched, but nothing got logged about the revalidation?
> > > + echo "Expected to hear about writeback iomap invalidations?"
> > > +fi
> > > +
> > > +echo Silence is golden
> > > +status=0
> > > +exit
> > > diff --git a/tests/xfs/924.out b/tests/xfs/924.out
> > > new file mode 100644
> > > index 0000000000..c6655da35a
> > > --- /dev/null
> > > +++ b/tests/xfs/924.out
> > > @@ -0,0 +1,2 @@
> > > +QA output created by 924
> > > +Silence is golden
> > >
> >
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [RFC PATCH] xfs: regression test for writeback corruption bug
2022-12-01 15:21 ` Zorro Lang
@ 2022-12-01 15:53 ` Darrick J. Wong
0 siblings, 0 replies; 27+ messages in thread
From: Darrick J. Wong @ 2022-12-01 15:53 UTC (permalink / raw)
To: Zorro Lang; +Cc: Dave Chinner, linux-xfs, linux-fsdevel, wen.gang.wang, fstests
On Thu, Dec 01, 2022 at 11:21:45PM +0800, Zorro Lang wrote:
> On Wed, Nov 30, 2022 at 11:04:18AM -0800, Darrick J. Wong wrote:
> > On Thu, Dec 01, 2022 at 01:34:47AM +0800, Zorro Lang wrote:
> > > On Tue, Nov 29, 2022 at 01:57:14PM -0800, Darrick J. Wong wrote:
> > > > From: Darrick J. Wong <djwong@kernel.org>
> > > >
> > > > This is a regression test for a data corruption bug that existed in XFS'
> > > > copy on write code between 4.9 and 4.19. The root cause is a
> > > > concurrency bug wherein we would drop ILOCK_SHARED after querying the
> > > > CoW fork in xfs_map_cow and retake it before querying the data fork in
> > > > xfs_map_blocks. See the test description for a lot more details.
> > > >
> > > > Cc: Wengang Wang <wen.gang.wang@oracle.com>
> > > > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > > > ---
> > > > common/rc | 15 ++++
> > > > common/tracing | 69 +++++++++++++++++
> > > > tests/xfs/924 | 215 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > tests/xfs/924.out | 2
> > > > 4 files changed, 301 insertions(+)
> > > > create mode 100644 common/tracing
> > > > create mode 100755 tests/xfs/924
> > > > create mode 100644 tests/xfs/924.out
> > > >
> > > > diff --git a/common/rc b/common/rc
> > > > index d71fc0603f..b1b7a3e553 100644
> > > > --- a/common/rc
> > > > +++ b/common/rc
> > > > @@ -3625,6 +3625,21 @@ _check_xflag()
> > > > fi
> > > > }
> > > >
> > > > +# Make sure the given file access mode is set to use the pagecache. If
> > > > +# userspace or kernel don't support statx or STATX_ATTR_DAX, we assume that
> > > > +# means pagecache. The sole parameter must be a directory.
> > > > +_require_pagecache_access() {
> > > > + local testfile="$1/testfile"
> > > > +
> > > > + touch "$testfile"
> > > > + if ! _check_s_dax "$testfile" 0 &>> $seqres.full; then
> > > > + rm -f "$testfile"
> > > > + _notrun 'test requires pagecache access'
> > > > + fi
> > > > +
> > > > + rm -f "$testfile"
> > > > +}
> > > > +
> > > > # Check if dax mount options are supported
> > > > #
> > > > # $1 can be either 'dax=always' or 'dax'
> > > > diff --git a/common/tracing b/common/tracing
> > > > new file mode 100644
> > > > index 0000000000..35e5ed41c2
> > > > --- /dev/null
> > > > +++ b/common/tracing
> > > > @@ -0,0 +1,69 @@
> > > > +##/bin/bash
> > > > +# SPDX-License-Identifier: GPL-2.0-or-later
> > > > +# Copyright (c) 2022 Oracle. All Rights Reserved.
> > > > +#
> > > > +# Routines for dealing with ftrace (or any other tracing).
> > > > +
> > > > +_require_ftrace() {
> > > > + local ftrace_dir="/sys/kernel/debug/tracing/instances/"
> > > > + test -d "$ftrace_dir" || _notrun "kernel does not support ftrace"
> > > > +
> > > > + # Give this fstest its own ftrace buffer so that we don't mess up
> > > > + # any other tracers that might be running.
> > > > + FTRACE_DIR="$ftrace_dir/fstests.$seq"
> > > > + test -d "$FTRACE_DIR" && rmdir "$FTRACE_DIR"
> > > > +}
> > > > +
> > > > +_ftrace_cleanup() {
> > > > + if [ -d "$FTRACE_DIR" ]; then
> > > > + _ftrace_ignore_events
> > > > + # Removing an ftrace buffer requires rmdir, even though the
> > > > + # virtual directory contains children.
> > > > + rmdir "$FTRACE_DIR"
> > > > + fi
> > > > +}
> > > > +
> > > > +# Intercept the given events. Arguments may be regular expressions.
> > > > +_ftrace_record_events() {
> > > > + local pwd="$PWD"
> > > > +
> > > > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > > > + mkdir "$FTRACE_DIR"
> > > > + cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
> > > > +
> > > > + for arg in "$@"; do
> > > > + for tp in */${arg}; do
> > > > + # Replace slashes with semicolons per ftrace convention
> > > > + echo "${tp////:}" >> ../set_event
> > > > + done
> > > > + done
> > > > + cd "$pwd"
> > >
> > > Is the relative path necessary, can we use absolute path at here?
> >
> > Hm. I suppose that inner loop could be replaced by:
> >
> > find "$FTRACE_DIR/events/ -type d -name "$arg" -printf '%P\n' | \
> > tr '/' ':' >> "$FTRACE_DIR/set_event"
> >
> > and then we don't need all this cd'ing insanity. I'll try that and
> > report back.
> >
> > > > +}
> > > > +
> > > > +# Stop intercepting the given events. If no arguments, stops all events.
> > > > +_ftrace_ignore_events() {
> > > > + local pwd="$PWD"
> > > > +
> > > > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > > > + cd "$FTRACE_DIR/events/" || _fail "$FTRACE_DIR: ftrace not set up?"
> > > > +
> > > > + if [ "$#" -eq 0 ]; then
> > > > + echo > ../set_event
> > > > + else
> > > > + for arg in "$@"; do
> > > > + for tp in */${arg}; do
> > > > + # Replace slashes with semicolons per ftrace convention
> > > > + echo "!${tp////:}" >> ../set_event
> > > > + done
> > > > + done
> > > > + fi
> > > > +
> > > > + cd "$pwd"
> > >
> > > Same at here
> > >
> > > > +}
> > > > +
> > > > +# Dump whatever was written to the ftrace buffer since the last time this
> > > > +# helper was called.
> > > > +_ftrace_dump() {
> > > > + test -n "$FTRACE_DIR" || _fail "_require_ftrace not run?"
> > > > + (cd "$FTRACE_DIR" && cat trace)
> > >
> > > Why not "cat $FTRACE_DIR/trace" ?
> >
> > Fixed.
> >
> > > > +}
> > > > diff --git a/tests/xfs/924 b/tests/xfs/924
> > > > new file mode 100755
> > > > index 0000000000..81f8ba2743
> > > > --- /dev/null
> > > > +++ b/tests/xfs/924
> > > > @@ -0,0 +1,215 @@
> > > > +#! /bin/bash
> > > > +# SPDX-License-Identifier: GPL-2.0
> > > > +# Copyright (c) 2022 Oracle. All Rights Reserved.
> > > > +#
> > > > +# FS QA Test 924
> > > > +#
> > > > +# This is a regression test for a data corruption bug that existed in XFS' copy
> > > > +# on write code between 4.9 and 4.19. The root cause is a concurrency bug
> > > > +# wherein we would drop ILOCK_SHARED after querying the CoW fork in xfs_map_cow
> > > > +# and retake it before querying the data fork in xfs_map_blocks. If a second
> > > > +# thread changes the CoW fork mappings between the two calls, it's possible for
> > > > +# xfs_map_blocks to return a zero-block mapping, which results in writeback
> > > > +# being elided for that block. Elided writeback of dirty data results in
> > > > +# silent loss of writes.
> > > > +#
> > > > +# Worse yet, kernels from that era still used buffer heads, which means that an
> > > > +# elided writeback leaves the page clean but the bufferheads dirty. Due to a
> > > > +# naïve optimization in mark_buffer_dirty, the SetPageDirty call is elided if
> > > > +# the bufferhead is dirty, which means that a subsequent rewrite of the data
> > > > +# block will never result in the page being marked dirty, and all subsequent
> > > > +# writes are lost.
> > > > +#
> > > > +# It turns out that Christoph Hellwig unwittingly fixed the race in commit
> > > > +# 5c665e5b5af6 ("xfs: remove xfs_map_cow"), and no testcase was ever written.
> > > > +# Four years later, we hit it on a production 4.14 kernel. This testcase
> > > > +# relies on a debugging knob that introduces artificial delays into writeback.
> > > > +#
> > > > +# Before the race, the file blocks 0-1 are not shared and blocks 2-5 are
> > > > +# shared. There are no extents in CoW fork.
> > > > +#
> > > > +# Two threads race like this:
> > > > +#
> > > > +# Thread 1 (writeback block 0) | Thread 2 (write to block 2)
> > > > +# ---------------------------------|--------------------------------
> > > > +# |
> > > > +# 1. Check if block 0 in CoW fork |
> > > > +# from xfs_map_cow. |
> > > > +# |
> > > > +# 2. Block 0 not found in CoW |
> > > > +# fork; the block is considered |
> > > > +# not shared. |
> > > > +# |
> > > > +# 3. xfs_map_blocks looks up data |
> > > > +# fork to get a map covering |
> > > > +# block 0. |
> > > > +# |
> > > > +# 4. It gets a data fork mapping |
> > > > +# for block 0 with length 2. |
> > > > +# |
> > > > +# | 1. A buffered write to block 2 sees
> > > > +# | that it is a shared block and no
> > > > +# | extent covers block 2 in CoW fork.
> > > > +# |
> > > > +# | It creates a new CoW fork mapping.
> > > > +# | Due to the cowextsize, the new
> > > > +# | extent starts at block 0 with
> > > > +# | length 128.
> > > > +# |
> > > > +# |
> > > > +# 5. It lookup CoW fork again to |
> > > > +# trim the map (0, 2) to a |
> > > > +# shared block boundary. |
> > > > +# |
> > > > +# 5a. It finds (0, 128) in CoW fork|
> > > > +# 5b. It trims the data fork map |
> > > > +# from (0, 1) to (0, 0) (!!!) |
> > > > +# |
> > > > +# 6. The xfs_imap_valid call after |
> > > > +# the xfs_map_blocks call checks|
> > > > +# if the mapping (0, 0) covers |
> > > > +# block 0. The result is "NO". |
> > > > +# |
> > > > +# 7. Since block 0 has no physical |
> > > > +# block mapped, it's not added |
> > > > +# to the ioend. This is the |
> > > > +# first problem. |
> > > > +# |
> > > > +# 8. xfs_add_to_ioend usually |
> > > > +# clears the bufferhead dirty |
> > > > +# flag Because this is skipped,|
> > > > +# we leave the page clean with |
> > > > +# the associated buffer head(s) |
> > > > +# dirty (the second problem). |
> > > > +# Now the dirty state is |
> > > > +# inconsistent.
> > > > +#
> > > > +# On newer kernels, this is also a functionality test for the ifork sequence
> > > > +# counter because the writeback completions will change the data fork and force
> > > > +# revalidations of the wb mapping.
> > > > +#
> > > > +. ./common/preamble
> > > > +_begin_fstest auto quick clone
> > > > +
> > > > +# Import common functions.
> > > > +. ./common/reflink
> > > > +. ./common/inject
> > > > +. ./common/tracing
> > > > +
> > > > +# real QA test starts here
> > > > +_cleanup()
> > > > +{
> > > > + _ftrace_cleanup
> > > > + cd /
> > > > + rm -r -f $tmp.* $sentryfile $tracefile
> > > > +}
> > > > +
> > > > +# Modify as appropriate.
> > > > +_supported_fs xfs
> > > > +_fixed_by_kernel_commit 5c665e5b5af6 "xfs: remove xfs_map_cow"
> > > > +_require_ftrace
> > > > +_require_error_injection
> > > > +_require_scratch_reflink
> > > > +_require_cp_reflink
> > > > +
> > > > +_scratch_mkfs >> $seqres.full
> > > > +_scratch_mount >> $seqres.full
> > > > +
> > > > +# This is a pagecache test, so try to disable fsdax mode.
> > > > +$XFS_IO_PROG -c 'chattr -x' $SCRATCH_MNT &> $seqres.full
> > > > +_require_pagecache_access $SCRATCH_MNT
> > > > +
> > > > +knob="$(_find_xfs_mountdev_errortag_knob $SCRATCH_DEV "wb_delay_ms")"
> > > > +test -w "$knob" || _notrun "Kernel does not have wb_delay_ms error injector"
> > >
> > > Can `_require_xfs_io_error_injection` help that?
> > >
> > > > +
> > > > +blksz=65536
> > > > +_require_congruent_file_oplen $SCRATCH_MNT $blksz
> > > > +
> > > > +# Make sure we have sufficient extent size to create speculative CoW
> > > > +# preallocations.
> > > > +$XFS_IO_PROG -c 'cowextsize 1m' $SCRATCH_MNT
> > > > +
> > > > +# Write out a file with the first two blocks unshared and the rest shared.
> > > > +_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file >> $seqres.full
> > > > +_pwrite_byte 0x59 0 $((160 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > > > +sync
> > > > +
> > > > +_cp_reflink $SCRATCH_MNT/file $SCRATCH_MNT/file.reflink
> > > > +
> > > > +_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file >> $seqres.full
> > > > +_pwrite_byte 0x58 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > > > +sync
> > > > +
> > > > +# Avoid creation of large folios on newer kernels by cycling the mount and
> > > > +# immediately writing to the page cache.
> > > > +_scratch_cycle_mount
> > > > +
> > > > +# Write the same data to file.compare as we're about to do to file. Do this
> > > > +# before slowing down writeback to avoid unnecessary delay.
> > > > +_pwrite_byte 0x57 0 $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > > > +_pwrite_byte 0x56 $((2 * blksz)) $((2 * blksz)) $SCRATCH_MNT/file.compare >> $seqres.full
> > > > +sync
> > > > +
> > > > +# Introduce a half-second wait to each writeback block mapping call. This
> > > > +# gives us a chance to race speculative cow prealloc with writeback.
> > > > +wb_delay=500
> > > > +echo $wb_delay > $knob
> > >
> > > Oh, you'd like to avoid depending on xfs_io ?
> >
> > Oops, this was leftover from before I ported the xfs_errortag.h changes
> > to xfsprogs.
> >
> > > > +curval="$(cat $knob)"
> > > > +test "$curval" -eq $wb_delay || echo "expected wb_delay_ms == $wb_delay"
> > > > +
> > > > +_ftrace_record_events 'xfs_wb*iomap_invalid'
> > > > +
> > > > +# Start thread 1 + writeback above
> > > > +$XFS_IO_PROG -c "pwrite -S 0x57 0 $((2 * blksz))" \
> > > > + -c 'bmap -celpv' -c 'bmap -elpv' \
> > >
> > > I didn't find the "bmap -c" option, is it a new option? Won't it break the
> > > golden image if a system doesn't support it?
> >
> > -c is a deliberately undocumented option to the bmap command; it's been
> > there since the introduction of reflink.
>
> But when I tried that on rhel8 with a varietal ersion of xfsprogs 5.0.0
> (xfsprogs-5.0.0-10.el8), I got below error output:
>
> # xfs_io -c "bmap -celpv" testfile >/dev/null
> xfs_io: xfsctl(XFS_IOC_GETBMAPX) iflags=0x28 ["testfile"]: Invalid argument
> # xfs_io -c "bmap -c" testfile >/dev/null
> xfs_io: xfsctl(XFS_IOC_GETBMAPX) iflags=0x28 ["testfile"]: Invalid argument
> # xfs_io -c "bmap -elpv" testfile >/dev/null
> (no error output)
>
> So, maybe, if you don't need this output to be golden image, how about filter
> out the error output to $seqres.full too? Or any better idea?
D'oh, forgot that -c only works if CONFFIG_XFS_DEBUG=y. I'll remove the
bmap commands, since the trace data now tells us everything we need.
--D
> Thanks,
> Zorro
>
> >
> > > > + -c 'fsync' $SCRATCH_MNT/file >> $seqres.full &
> > > > +sleep 1
> > > > +
> > > > +# Start a sentry to look for evidence of the XFS_ERRORTAG_REPORT logging. If
> > > > +# we see that, we know we've forced writeback to revalidate a mapping. The
> > > > +# test has been successful, so turn off the delay.
> > > > +sentryfile=$TEST_DIR/$seq.sentry
> > > > +tracefile=$TEST_DIR/$seq.ftrace
> > > > +wait_for_errortag() {
> > > > + while [ -e "$sentryfile" ]; do
> > > > + _ftrace_dump | grep iomap_invalid >> "$tracefile"
> > > > + if grep -q iomap_invalid "$tracefile"; then
> > > > + echo 0 > "$knob"
> > > > + _ftrace_ignore_events
> > > > + break;
> > > > + fi
> > > > + sleep 0.5
> > > > + done
> > > > +}
> > > > +touch $sentryfile
> > > > +wait_for_errortag &
> > >
> > > Should we *wait* background processes in cleanup after removing $sentryfile.
> >
> > Yes.
> >
> > > > +
> > > > +# Start thread 2 to create the cowextsize reservation
> > > > +$XFS_IO_PROG -c "pwrite -S 0x56 $((2 * blksz)) $((2 * blksz))" \
> > > > + -c 'bmap -celpv' -c 'bmap -elpv' \
> > > > + -c 'fsync' $SCRATCH_MNT/file >> $seqres.full
> > > > +rm -f $sentryfile
> > > > +
> > > > +cat "$tracefile" >> $seqres.full
> > > > +grep -q iomap_invalid "$tracefile"
> > > > +saw_invalidation=$?
> > > > +
> > > > +# Flush everything to disk. If the bug manifests, then after the cycle,
> > > > +# file should have stale 0x58 in block 0 because we silently dropped a write.
> > > > +_scratch_cycle_mount
> > > > +
> > > > +if ! cmp -s $SCRATCH_MNT/file $SCRATCH_MNT/file.compare; then
> > > > + echo file and file.compare do not match
> > > > + $XFS_IO_PROG -c 'bmap -celpv' -c 'bmap -elpv' $SCRATCH_MNT/file >> $seqres.full
> > > > + echo file.compare
> > > > + od -tx1 -Ad -c $SCRATCH_MNT/file.compare
> > > > + echo file
> > > > + od -tx1 -Ad -c $SCRATCH_MNT/file
> > > > +elif [ $saw_invalidation -ne 0 ]; then
> > > > + # The files matched, but nothing got logged about the revalidation?
> > > > + echo "Expected to hear about writeback iomap invalidations?"
> > > > +fi
> > > > +
> > > > +echo Silence is golden
> > > > +status=0
> > > > +exit
> > > > diff --git a/tests/xfs/924.out b/tests/xfs/924.out
> > > > new file mode 100644
> > > > index 0000000000..c6655da35a
> > > > --- /dev/null
> > > > +++ b/tests/xfs/924.out
> > > > @@ -0,0 +1,2 @@
> > > > +QA output created by 924
> > > > +Silence is golden
> > > >
> > >
> >
>
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2022-12-01 15:53 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-23 5:58 [PATCH 0/9 V4] xfs, iomap: fix data corrupton due to stale cached iomaps Dave Chinner
2022-11-23 5:58 ` [PATCH 1/9] xfs: write page faults in iomap are not buffered writes Dave Chinner
2022-11-23 5:58 ` [PATCH 2/9] xfs: punching delalloc extents on write failure is racy Dave Chinner
2022-11-23 5:58 ` [PATCH 3/9] xfs: use byte ranges for write cleanup ranges Dave Chinner
2022-11-23 5:58 ` [PATCH 4/9] xfs,iomap: move delalloc punching to iomap Dave Chinner
2022-11-23 5:58 ` [PATCH 5/9] iomap: buffered write failure should not truncate the page cache Dave Chinner
2022-11-23 13:24 ` kernel test robot
2022-11-23 5:58 ` [PATCH 6/9] xfs: xfs_bmap_punch_delalloc_range() should take a byte range Dave Chinner
2022-11-23 5:58 ` [PATCH 7/9] iomap: write iomap validity checks Dave Chinner
2022-11-23 5:58 ` [PATCH 8/9] xfs: use iomap_valid method to detect stale cached iomaps Dave Chinner
2022-11-23 5:58 ` [PATCH 9/9] xfs: drop write error injection is unfixable, remove it Dave Chinner
2022-11-28 22:34 ` [PATCH 10/9] xfs: add debug knob to slow down writeback for fun Darrick J. Wong
2022-11-28 23:30 ` Dave Chinner
2022-11-28 23:39 ` Darrick J. Wong
2022-11-29 1:21 ` [PATCH v2 " Darrick J. Wong
2022-11-29 1:34 ` Dave Chinner
2022-11-29 21:53 ` Darrick J. Wong
2022-11-29 21:57 ` [RFC PATCH] xfs: regression test for writeback corruption bug Darrick J. Wong
2022-11-30 17:34 ` Zorro Lang
2022-11-30 19:04 ` Darrick J. Wong
2022-12-01 15:21 ` Zorro Lang
2022-12-01 15:53 ` Darrick J. Wong
2022-11-28 22:34 ` [PATCH 11/9] xfs: add debug knob to slow down write for fun Darrick J. Wong
2022-11-29 1:22 ` [PATCH v2 " Darrick J. Wong
2022-11-29 1:37 ` Dave Chinner
2022-11-29 21:53 ` Darrick J. Wong
2022-11-29 21:55 ` [RFC PATCH] xfs: regression test for writes racing with reclaim writeback Darrick J. Wong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.