[PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Jianhua Lu]

Add device tree bindings for the Kinetic KTZ8866 backlight driver.

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
---
 .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml

diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
new file mode 100644
index 000000000000..7286c3fc7f5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTZ8866 backlight
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Kinetic Technologies KTZ8866 is a high efficiency 6-sinks led backlight
+  with dual lcd bias power.
+  https://www.kinet-ic.com/ktz8866/
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    items:
+      const: kinetic,ktz8866
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "kinetic,ktz8866";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&bl_en_default>;
+    };
-- 
2.38.2

[PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Jianhua Lu]

Add device tree bindings for the Kinetic KTZ8866 backlight driver.

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
---
 .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml

diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
new file mode 100644
index 000000000000..7286c3fc7f5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTZ8866 backlight
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Kinetic Technologies KTZ8866 is a high efficiency 6-sinks led backlight
+  with dual lcd bias power.
+  https://www.kinet-ic.com/ktz8866/
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    items:
+      const: kinetic,ktz8866
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "kinetic,ktz8866";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&bl_en_default>;
+    };
-- 
2.38.2

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Krzysztof Kozlowski]

On 21/12/2022 08:02, Jianhua Lu wrote:
> Add device tree bindings for the Kinetic KTZ8866 backlight driver.

1. Your patches are not properly threaded which makes it difficult to
review and handle them. Resend with proper threads.

2. Subject: drop second, redundant "binding for".

> 
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
>  .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> new file mode 100644
> index 000000000000..7286c3fc7f5d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> @@ -0,0 +1,37 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kinetic Technologies KTZ8866 backlight
> +
> +maintainers:
> +  - Jianhua Lu <lujianhua000@gmail.com>
> +
> +description: |
> +  The Kinetic Technologies KTZ8866 is a high efficiency 6-sinks led backlight
> +  with dual lcd bias power.
> +  https://www.kinet-ic.com/ktz8866/
> +
> +allOf:
> +  - $ref: common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      const: kinetic,ktz8866

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

> +
> +required:
> +  - compatible
> +
> +additionalProperties: false

This should be rather unevaluatedProperties: false, otherwise you do not
allow any other properties, except compatible. Was this the intention?

Best regards,
Krzysztof

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Krzysztof Kozlowski]

On 21/12/2022 08:02, Jianhua Lu wrote:
> Add device tree bindings for the Kinetic KTZ8866 backlight driver.

1. Your patches are not properly threaded which makes it difficult to
review and handle them. Resend with proper threads.

2. Subject: drop second, redundant "binding for".

> 
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
>  .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> new file mode 100644
> index 000000000000..7286c3fc7f5d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> @@ -0,0 +1,37 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kinetic Technologies KTZ8866 backlight
> +
> +maintainers:
> +  - Jianhua Lu <lujianhua000@gmail.com>
> +
> +description: |
> +  The Kinetic Technologies KTZ8866 is a high efficiency 6-sinks led backlight
> +  with dual lcd bias power.
> +  https://www.kinet-ic.com/ktz8866/
> +
> +allOf:
> +  - $ref: common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      const: kinetic,ktz8866

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

> +
> +required:
> +  - compatible
> +
> +additionalProperties: false

This should be rather unevaluatedProperties: false, otherwise you do not
allow any other properties, except compatible. Was this the intention?

Best regards,
Krzysztof

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[jianhua lu]

[-- Attachment #1: Type: text/plain, Size: 2235 bytes --]

Thanks for review, I will resend this path.

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 于 2022年12月21日周三
16:13写道：

> On 21/12/2022 08:02, Jianhua Lu wrote:
> > Add device tree bindings for the Kinetic KTZ8866 backlight driver.
>
> 1. Your patches are not properly threaded which makes it difficult to
> review and handle them. Resend with proper threads.
>
> 2. Subject: drop second, redundant "binding for".
>
> >
> > Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> > ---
> >  .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
> >  1 file changed, 37 insertions(+)
> >  create mode 100644
> Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> >
> > diff --git
> a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> > new file mode 100644
> > index 000000000000..7286c3fc7f5d
> > --- /dev/null
> > +++
> b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> > @@ -0,0 +1,37 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Kinetic Technologies KTZ8866 backlight
> > +
> > +maintainers:
> > +  - Jianhua Lu <lujianhua000@gmail.com>
> > +
> > +description: |
> > +  The Kinetic Technologies KTZ8866 is a high efficiency 6-sinks led
> backlight
> > +  with dual lcd bias power.
> > +  https://www.kinet-ic.com/ktz8866/
> > +
> > +allOf:
> > +  - $ref: common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      const: kinetic,ktz8866
>
> Does not look like you tested the bindings. Please run `make
> dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
>
> > +
> > +required:
> > +  - compatible
> > +
> > +additionalProperties: false
>
> This should be rather unevaluatedProperties: false, otherwise you do not
> allow any other properties, except compatible. Was this the intention?
>
> Best regards,
> Krzysztof
>
>

[-- Attachment #2: Type: text/html, Size: 3258 bytes --]

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Krzysztof Kozlowski]

On 21/12/2022 10:40, jianhua lu wrote:
> Thanks for review, I will resend this path.

Are you going to test it, before sending?

Best regards,
Krzysztof

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Krzysztof Kozlowski]

On 21/12/2022 10:40, jianhua lu wrote:
> Thanks for review, I will resend this path.

Are you going to test it, before sending?

Best regards,
Krzysztof

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[jianhua lu]

[-- Attachment #1: Type: text/plain, Size: 293 bytes --]

Yes, I will

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 于 2022年12月21日周三
17:46写道：

> On 21/12/2022 10:40, jianhua lu wrote:
> > Thanks for review, I will resend this path.
>
> Are you going to test it, before sending?
>
> Best regards,
> Krzysztof
>
>

[-- Attachment #2: Type: text/html, Size: 594 bytes --]

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Rob Herring]

On Wed, 21 Dec 2022 15:02:16 +0800, Jianhua Lu wrote:
> Add device tree bindings for the Kinetic KTZ8866 backlight driver.
> 
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
>  .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml: properties:compatible:items: {'const': 'kinetic,ktz8866'} is not of type 'array'
	from schema $id: http://devicetree.org/meta-schemas/string-array.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221221070216.17850-1-lujianhua000@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Rob Herring]

On Wed, 21 Dec 2022 15:02:16 +0800, Jianhua Lu wrote:
> Add device tree bindings for the Kinetic KTZ8866 backlight driver.
> 
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
>  .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml: properties:compatible:items: {'const': 'kinetic,ktz8866'} is not of type 'array'
	from schema $id: http://devicetree.org/meta-schemas/string-array.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221221070216.17850-1-lujianhua000@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Jianhua Lu]

On Wed, Dec 21, 2022 at 07:45:59AM -0600, Rob Herring wrote:
> 
> On Wed, 21 Dec 2022 15:02:16 +0800, Jianhua Lu wrote:
> > Add device tree bindings for the Kinetic KTZ8866 backlight driver.
> > 
> > Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> > ---
> >  .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
> >  1 file changed, 37 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml: properties:compatible:items: {'const': 'kinetic,ktz8866'} is not of type 'array'
> 	from schema $id: http://devicetree.org/meta-schemas/string-array.yaml#
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221221070216.17850-1-lujianhua000@gmail.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

I have resent a new patch and gotten rip of errors of the old dt-binding yaml.

Re: [PATCH 2/2] dt-bindings: leds: backlight: add binding for Kinetic KTZ8866 backlight

[Jianhua Lu]

On Wed, Dec 21, 2022 at 07:45:59AM -0600, Rob Herring wrote:
> 
> On Wed, 21 Dec 2022 15:02:16 +0800, Jianhua Lu wrote:
> > Add device tree bindings for the Kinetic KTZ8866 backlight driver.
> > 
> > Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> > ---
> >  .../leds/backlight/kinetic,ktz8866.yaml       | 37 +++++++++++++++++++
> >  1 file changed, 37 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml: properties:compatible:items: {'const': 'kinetic,ktz8866'} is not of type 'array'
> 	from schema $id: http://devicetree.org/meta-schemas/string-array.yaml#
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221221070216.17850-1-lujianhua000@gmail.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

I have resent a new patch and gotten rip of errors of the old dt-binding yaml.