All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 1/2] backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
@ 2022-12-22 12:54 ` Jianhua Lu
  0 siblings, 0 replies; 6+ messages in thread
From: Jianhua Lu @ 2022-12-22 12:54 UTC (permalink / raw)
  To: Lee Jones, Daniel Thompson, Jingoo Han, Pavel Machek,
	Rob Herring, Krzysztof Kozlowski, Helge Deller
  Cc: linux-kernel, dri-devel, linux-leds, devicetree, linux-fbdev, Jianhua Lu

Add support for Kinetic KTZ8866 backlight, which is used in
Xiaomi tablet, Mi Pad 5 series. This driver lightly based on
downstream implementation [1].
[1] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/elish-r-oss/drivers/video/backlight/ktz8866.c

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
---
Changes in v2:
  - Add missing staitc modifier to ktz8866_write function.

Changes in v3:
  - Add 2022 to Copyright line.
  - Sort headers
  - Remove meaningless comment
  - Use definitions instead of hardcoding.
  - Add missing maintainer info 

 MAINTAINERS                       |   6 +
 drivers/video/backlight/Kconfig   |   8 ++
 drivers/video/backlight/Makefile  |   1 +
 drivers/video/backlight/ktz8866.c | 180 ++++++++++++++++++++++++++++++
 drivers/video/backlight/ktz8866.h |  31 +++++
 5 files changed, 226 insertions(+)
 create mode 100644 drivers/video/backlight/ktz8866.c
 create mode 100644 drivers/video/backlight/ktz8866.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 1daadaa4d48b..b33385b5fd3c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11507,6 +11507,12 @@ M:	John Hawley <warthog9@eaglescrag.net>
 S:	Maintained
 F:	tools/testing/ktest
 
+KTZ8866 BACKLIGHT DRIVER
+M:	Jianhua Lu <lujianhua000@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
+F:	drivers/video/backlight/ktz8866.c
+
 L3MDEV
 M:	David Ahern <dsahern@kernel.org>
 L:	netdev@vger.kernel.org
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 936ba1e4d35e..2845fd7e33ad 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -190,6 +190,14 @@ config BACKLIGHT_KTD253
 	  which is a 1-wire GPIO-controlled backlight found in some mobile
 	  phones.
 
+config BACKLIGHT_KTZ8866
+	tristate "Backlight Driver for Kinetic KTZ8866"
+	depends on I2C
+	select REGMAP_I2C
+	help
+		Say Y to enabled the backlight driver for the Kinetic KTZ8866
+		found in Xiaomi Mi Pad 5 series.
+
 config BACKLIGHT_LM3533
 	tristate "Backlight Driver for LM3533"
 	depends on MFD_LM3533
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index e815f3f1deff..f70a819c304c 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_BACKLIGHT_HP680)		+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_HP700)		+= jornada720_bl.o
 obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO)	+= ipaq_micro_bl.o
 obj-$(CONFIG_BACKLIGHT_KTD253)		+= ktd253-backlight.o
+obj-$(CONFIG_BACKLIGHT_KTZ8866)		+= ktz8866.o
 obj-$(CONFIG_BACKLIGHT_LM3533)		+= lm3533_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3630A)		+= lm3630a_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3639)		+= lm3639_bl.o
diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c
new file mode 100644
index 000000000000..ea641bdfc4d2
--- /dev/null
+++ b/drivers/video/backlight/ktz8866.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backlight driver for the Kinetic KTZ8866
+ *
+ * Copyright (C) 2022 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include "ktz8866.h"
+
+#define DEFAULT_BRIGHTNESS 1500
+#define MAX_BRIGHTNESS 2047
+#define REG_MAX 0x15
+
+#define BL_EN_BIT BIT(6)
+#define BL_CURRENT_SINKS 0x1F
+#define BL_OVP_LIMIT 0x33
+#define LED_CURRENT_RAMPING_TIME 0xBD
+#define LED_DIMMING_TIME 0x11
+#define LCD_BIAS_EN 0x9F
+#define LED_CURRENT 0xF9
+
+#define low_3_bit(x) ((x)&0x7)
+#define high_8_bit(x) ((x >> 3) & 0xFF)
+
+struct ktz8866 {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	bool state;
+};
+
+enum {
+	LED_OFF,
+	LED_ON,
+};
+
+static const struct regmap_config ktz8866_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = REG_MAX,
+};
+
+static int ktz8866_write(struct ktz8866 *ktz, unsigned int reg,
+			 unsigned int val)
+{
+	return regmap_write(ktz->regmap, reg, val);
+}
+
+static int ktz8866_update_bits(struct ktz8866 *ktz, unsigned int reg,
+			       unsigned int mask, unsigned int val)
+{
+	return regmap_update_bits(ktz->regmap, reg, mask, val);
+}
+
+static int ktz8866_backlight_update_status(struct backlight_device *backlight_dev)
+{
+	struct ktz8866 *ktz = bl_get_data(backlight_dev);
+	unsigned int brightness = backlight_get_brightness(backlight_dev);
+
+	if (!ktz->state && brightness > 0) {
+		ktz8866_update_bits(ktz, BL_EN, BL_EN_BIT, BL_EN_BIT);
+		ktz->state = LED_ON;
+	} else if (brightness == 0) {
+		ktz8866_update_bits(ktz, BL_EN, BL_EN_BIT, 0);
+		ktz->state = LED_OFF;
+		msleep(10);
+	}
+
+	/* Set brightness */
+	ktz8866_write(ktz, BL_BRT_LSB, low_3_bit(brightness));
+	ktz8866_write(ktz, BL_BRT_MSB, high_8_bit(brightness));
+
+	return 0;
+}
+
+static const struct backlight_ops ktz8866_backlight_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = ktz8866_backlight_update_status,
+};
+
+static void ktz8866_init(struct ktz8866 *ktz)
+{
+	/* Enable 1~5 current sinks */
+	ktz8866_write(ktz, BL_EN, BL_CURRENT_SINKS);
+	/* Backlight OVP 26.4V */
+	ktz8866_write(ktz, BL_CFG1, BL_OVP_LIMIT);
+	/* LED current ramping time 128ms */
+	ktz8866_write(ktz, BL_CFG2, LED_CURRENT_RAMPING_TIME);
+	/* LED on/off ramping time 1ms */
+	ktz8866_write(ktz, BL_DIMMING, LED_DIMMING_TIME);
+	/* Enable OUTP and OUTN via pin ENP and ENN */
+	ktz8866_write(ktz, LCD_BIAS_CFG1, LCD_BIAS_EN);
+	/* Backlight Full-scale LED Current 30.0mA */
+	ktz8866_write(ktz, FULL_SCALE_CURRENT, LED_CURRENT);
+}
+
+static int ktz8866_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct backlight_device *backlight_dev;
+	struct backlight_properties props;
+	struct ktz8866 *ktz;
+
+	ktz = devm_kzalloc(&client->dev, sizeof(*ktz), GFP_KERNEL);
+	if (!ktz)
+		return -ENOMEM;
+
+	ktz->client = client;
+	ktz->regmap = devm_regmap_init_i2c(client, &ktz8866_regmap_config);
+
+	if (IS_ERR(ktz->regmap)) {
+		dev_err(&client->dev, "failed to init regmap\n");
+		return PTR_ERR(ktz->regmap);
+	}
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = MAX_BRIGHTNESS;
+	props.brightness = clamp_t(unsigned int, DEFAULT_BRIGHTNESS, 0,
+				   props.max_brightness);
+
+	backlight_dev = devm_backlight_device_register(
+		&client->dev, "ktz8866-backlight", &client->dev, ktz,
+		&ktz8866_backlight_ops, &props);
+
+	if (IS_ERR(backlight_dev)) {
+		dev_err(&client->dev, "failed to register backlight device\n");
+		return PTR_ERR(backlight_dev);
+	}
+
+	ktz8866_init(ktz);
+
+	i2c_set_clientdata(client, backlight_dev);
+	backlight_update_status(backlight_dev);
+
+	return 0;
+}
+
+static void ktz8866_remove(struct i2c_client *client)
+{
+	struct backlight_device *backlight_dev = i2c_get_clientdata(client);
+
+	backlight_dev->props.brightness = 0;
+	backlight_update_status(backlight_dev);
+}
+
+static const struct i2c_device_id ktz8866_ids[] = {
+	{ "ktz8866", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ktz8866_ids);
+
+static const struct of_device_id ktz8866_match_table[] = {
+	{
+		.compatible = "kinetic,ktz8866",
+	},
+	{},
+};
+
+static struct i2c_driver ktz8866_driver = {
+	.driver = {
+		.name = "ktz8866",
+		.of_match_table = ktz8866_match_table,
+	},
+	.probe = ktz8866_probe,
+	.remove = ktz8866_remove,
+	.id_table = ktz8866_ids,
+};
+
+module_i2c_driver(ktz8866_driver);
+
+MODULE_DESCRIPTION("Kinetic KTZ8866 Backlight Driver");
+MODULE_AUTHOR("Jianhua Lu <lujianhua000@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/ktz8866.h b/drivers/video/backlight/ktz8866.h
new file mode 100644
index 000000000000..b0ed8cbee608
--- /dev/null
+++ b/drivers/video/backlight/ktz8866.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Register definitions for Kinetic KTZ8866 backlight
+ *
+ * Copyright (C) 2022 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+#ifndef KTZ8866_H
+#define KTZ8866_H
+
+#define DEVICE_ID 0x01
+#define BL_CFG1 0x02
+#define BL_CFG2 0x03
+#define BL_BRT_LSB 0x04
+#define BL_BRT_MSB 0x05
+#define BL_EN 0x08
+#define LCD_BIAS_CFG1 0x09
+#define LCD_BIAS_CFG2 0x0A
+#define LCD_BIAS_CFG3 0x0B
+#define LCD_BOOST_CFG 0x0C
+#define OUTP_CFG 0x0D
+#define OUTN_CFG 0x0E
+#define FLAG 0x0F
+#define BL_OPTION1 0x10
+#define BL_OPTION2 0x11
+#define PWM2DIG_LSBs 0x12
+#define PWM2DIG_MSBs 0x13
+#define BL_DIMMING 0x14
+#define FULL_SCALE_CURRENT 0x15
+
+#endif /* KTZ8866_H */
-- 
2.38.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v3 1/2] backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
@ 2022-12-22 12:54 ` Jianhua Lu
  0 siblings, 0 replies; 6+ messages in thread
From: Jianhua Lu @ 2022-12-22 12:54 UTC (permalink / raw)
  To: Lee Jones, Daniel Thompson, Jingoo Han, Pavel Machek,
	Rob Herring, Krzysztof Kozlowski, Helge Deller
  Cc: devicetree, linux-fbdev, linux-kernel, dri-devel, Jianhua Lu, linux-leds

Add support for Kinetic KTZ8866 backlight, which is used in
Xiaomi tablet, Mi Pad 5 series. This driver lightly based on
downstream implementation [1].
[1] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/elish-r-oss/drivers/video/backlight/ktz8866.c

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
---
Changes in v2:
  - Add missing staitc modifier to ktz8866_write function.

Changes in v3:
  - Add 2022 to Copyright line.
  - Sort headers
  - Remove meaningless comment
  - Use definitions instead of hardcoding.
  - Add missing maintainer info 

 MAINTAINERS                       |   6 +
 drivers/video/backlight/Kconfig   |   8 ++
 drivers/video/backlight/Makefile  |   1 +
 drivers/video/backlight/ktz8866.c | 180 ++++++++++++++++++++++++++++++
 drivers/video/backlight/ktz8866.h |  31 +++++
 5 files changed, 226 insertions(+)
 create mode 100644 drivers/video/backlight/ktz8866.c
 create mode 100644 drivers/video/backlight/ktz8866.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 1daadaa4d48b..b33385b5fd3c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11507,6 +11507,12 @@ M:	John Hawley <warthog9@eaglescrag.net>
 S:	Maintained
 F:	tools/testing/ktest
 
+KTZ8866 BACKLIGHT DRIVER
+M:	Jianhua Lu <lujianhua000@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
+F:	drivers/video/backlight/ktz8866.c
+
 L3MDEV
 M:	David Ahern <dsahern@kernel.org>
 L:	netdev@vger.kernel.org
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 936ba1e4d35e..2845fd7e33ad 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -190,6 +190,14 @@ config BACKLIGHT_KTD253
 	  which is a 1-wire GPIO-controlled backlight found in some mobile
 	  phones.
 
+config BACKLIGHT_KTZ8866
+	tristate "Backlight Driver for Kinetic KTZ8866"
+	depends on I2C
+	select REGMAP_I2C
+	help
+		Say Y to enabled the backlight driver for the Kinetic KTZ8866
+		found in Xiaomi Mi Pad 5 series.
+
 config BACKLIGHT_LM3533
 	tristate "Backlight Driver for LM3533"
 	depends on MFD_LM3533
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index e815f3f1deff..f70a819c304c 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_BACKLIGHT_HP680)		+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_HP700)		+= jornada720_bl.o
 obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO)	+= ipaq_micro_bl.o
 obj-$(CONFIG_BACKLIGHT_KTD253)		+= ktd253-backlight.o
+obj-$(CONFIG_BACKLIGHT_KTZ8866)		+= ktz8866.o
 obj-$(CONFIG_BACKLIGHT_LM3533)		+= lm3533_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3630A)		+= lm3630a_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3639)		+= lm3639_bl.o
diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c
new file mode 100644
index 000000000000..ea641bdfc4d2
--- /dev/null
+++ b/drivers/video/backlight/ktz8866.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backlight driver for the Kinetic KTZ8866
+ *
+ * Copyright (C) 2022 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include "ktz8866.h"
+
+#define DEFAULT_BRIGHTNESS 1500
+#define MAX_BRIGHTNESS 2047
+#define REG_MAX 0x15
+
+#define BL_EN_BIT BIT(6)
+#define BL_CURRENT_SINKS 0x1F
+#define BL_OVP_LIMIT 0x33
+#define LED_CURRENT_RAMPING_TIME 0xBD
+#define LED_DIMMING_TIME 0x11
+#define LCD_BIAS_EN 0x9F
+#define LED_CURRENT 0xF9
+
+#define low_3_bit(x) ((x)&0x7)
+#define high_8_bit(x) ((x >> 3) & 0xFF)
+
+struct ktz8866 {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	bool state;
+};
+
+enum {
+	LED_OFF,
+	LED_ON,
+};
+
+static const struct regmap_config ktz8866_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = REG_MAX,
+};
+
+static int ktz8866_write(struct ktz8866 *ktz, unsigned int reg,
+			 unsigned int val)
+{
+	return regmap_write(ktz->regmap, reg, val);
+}
+
+static int ktz8866_update_bits(struct ktz8866 *ktz, unsigned int reg,
+			       unsigned int mask, unsigned int val)
+{
+	return regmap_update_bits(ktz->regmap, reg, mask, val);
+}
+
+static int ktz8866_backlight_update_status(struct backlight_device *backlight_dev)
+{
+	struct ktz8866 *ktz = bl_get_data(backlight_dev);
+	unsigned int brightness = backlight_get_brightness(backlight_dev);
+
+	if (!ktz->state && brightness > 0) {
+		ktz8866_update_bits(ktz, BL_EN, BL_EN_BIT, BL_EN_BIT);
+		ktz->state = LED_ON;
+	} else if (brightness == 0) {
+		ktz8866_update_bits(ktz, BL_EN, BL_EN_BIT, 0);
+		ktz->state = LED_OFF;
+		msleep(10);
+	}
+
+	/* Set brightness */
+	ktz8866_write(ktz, BL_BRT_LSB, low_3_bit(brightness));
+	ktz8866_write(ktz, BL_BRT_MSB, high_8_bit(brightness));
+
+	return 0;
+}
+
+static const struct backlight_ops ktz8866_backlight_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = ktz8866_backlight_update_status,
+};
+
+static void ktz8866_init(struct ktz8866 *ktz)
+{
+	/* Enable 1~5 current sinks */
+	ktz8866_write(ktz, BL_EN, BL_CURRENT_SINKS);
+	/* Backlight OVP 26.4V */
+	ktz8866_write(ktz, BL_CFG1, BL_OVP_LIMIT);
+	/* LED current ramping time 128ms */
+	ktz8866_write(ktz, BL_CFG2, LED_CURRENT_RAMPING_TIME);
+	/* LED on/off ramping time 1ms */
+	ktz8866_write(ktz, BL_DIMMING, LED_DIMMING_TIME);
+	/* Enable OUTP and OUTN via pin ENP and ENN */
+	ktz8866_write(ktz, LCD_BIAS_CFG1, LCD_BIAS_EN);
+	/* Backlight Full-scale LED Current 30.0mA */
+	ktz8866_write(ktz, FULL_SCALE_CURRENT, LED_CURRENT);
+}
+
+static int ktz8866_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct backlight_device *backlight_dev;
+	struct backlight_properties props;
+	struct ktz8866 *ktz;
+
+	ktz = devm_kzalloc(&client->dev, sizeof(*ktz), GFP_KERNEL);
+	if (!ktz)
+		return -ENOMEM;
+
+	ktz->client = client;
+	ktz->regmap = devm_regmap_init_i2c(client, &ktz8866_regmap_config);
+
+	if (IS_ERR(ktz->regmap)) {
+		dev_err(&client->dev, "failed to init regmap\n");
+		return PTR_ERR(ktz->regmap);
+	}
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = MAX_BRIGHTNESS;
+	props.brightness = clamp_t(unsigned int, DEFAULT_BRIGHTNESS, 0,
+				   props.max_brightness);
+
+	backlight_dev = devm_backlight_device_register(
+		&client->dev, "ktz8866-backlight", &client->dev, ktz,
+		&ktz8866_backlight_ops, &props);
+
+	if (IS_ERR(backlight_dev)) {
+		dev_err(&client->dev, "failed to register backlight device\n");
+		return PTR_ERR(backlight_dev);
+	}
+
+	ktz8866_init(ktz);
+
+	i2c_set_clientdata(client, backlight_dev);
+	backlight_update_status(backlight_dev);
+
+	return 0;
+}
+
+static void ktz8866_remove(struct i2c_client *client)
+{
+	struct backlight_device *backlight_dev = i2c_get_clientdata(client);
+
+	backlight_dev->props.brightness = 0;
+	backlight_update_status(backlight_dev);
+}
+
+static const struct i2c_device_id ktz8866_ids[] = {
+	{ "ktz8866", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ktz8866_ids);
+
+static const struct of_device_id ktz8866_match_table[] = {
+	{
+		.compatible = "kinetic,ktz8866",
+	},
+	{},
+};
+
+static struct i2c_driver ktz8866_driver = {
+	.driver = {
+		.name = "ktz8866",
+		.of_match_table = ktz8866_match_table,
+	},
+	.probe = ktz8866_probe,
+	.remove = ktz8866_remove,
+	.id_table = ktz8866_ids,
+};
+
+module_i2c_driver(ktz8866_driver);
+
+MODULE_DESCRIPTION("Kinetic KTZ8866 Backlight Driver");
+MODULE_AUTHOR("Jianhua Lu <lujianhua000@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/ktz8866.h b/drivers/video/backlight/ktz8866.h
new file mode 100644
index 000000000000..b0ed8cbee608
--- /dev/null
+++ b/drivers/video/backlight/ktz8866.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Register definitions for Kinetic KTZ8866 backlight
+ *
+ * Copyright (C) 2022 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+#ifndef KTZ8866_H
+#define KTZ8866_H
+
+#define DEVICE_ID 0x01
+#define BL_CFG1 0x02
+#define BL_CFG2 0x03
+#define BL_BRT_LSB 0x04
+#define BL_BRT_MSB 0x05
+#define BL_EN 0x08
+#define LCD_BIAS_CFG1 0x09
+#define LCD_BIAS_CFG2 0x0A
+#define LCD_BIAS_CFG3 0x0B
+#define LCD_BOOST_CFG 0x0C
+#define OUTP_CFG 0x0D
+#define OUTN_CFG 0x0E
+#define FLAG 0x0F
+#define BL_OPTION1 0x10
+#define BL_OPTION2 0x11
+#define PWM2DIG_LSBs 0x12
+#define PWM2DIG_MSBs 0x13
+#define BL_DIMMING 0x14
+#define FULL_SCALE_CURRENT 0x15
+
+#endif /* KTZ8866_H */
-- 
2.38.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v3 2/2] dt-bindings: leds: backlight: Add Kinetic KTZ8866 backlight
  2022-12-22 12:54 ` Jianhua Lu
@ 2022-12-22 12:54   ` Jianhua Lu
  -1 siblings, 0 replies; 6+ messages in thread
From: Jianhua Lu @ 2022-12-22 12:54 UTC (permalink / raw)
  To: Lee Jones, Daniel Thompson, Jingoo Han, Pavel Machek,
	Rob Herring, Krzysztof Kozlowski, Helge Deller
  Cc: linux-kernel, dri-devel, linux-leds, devicetree, linux-fbdev,
	Jianhua Lu, Krzysztof Kozlowski

Add Kinetic KTZ8866 backlight binding documentation.

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v2:
  - Remove "items" between "compatible" and "const: kinetic,ktz8866"
  - Change "additionalProperties" to "unevaluatedProperties"

Changes in v3:
  - Add Krzysztof's R-b

 .../leds/backlight/kinetic,ktz8866.yaml       | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml

diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
new file mode 100644
index 000000000000..c63c21bf69d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTZ8866 backlight
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Kinetic Technologies KTZ8866 is a high efficiency 6-sinks led backlight
+  with dual lcd bias power.
+  https://www.kinet-ic.com/ktz8866/
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktz8866
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "kinetic,ktz8866";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&bl_en_default>;
+    };
-- 
2.38.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v3 2/2] dt-bindings: leds: backlight: Add Kinetic KTZ8866 backlight
@ 2022-12-22 12:54   ` Jianhua Lu
  0 siblings, 0 replies; 6+ messages in thread
From: Jianhua Lu @ 2022-12-22 12:54 UTC (permalink / raw)
  To: Lee Jones, Daniel Thompson, Jingoo Han, Pavel Machek,
	Rob Herring, Krzysztof Kozlowski, Helge Deller
  Cc: devicetree, linux-fbdev, linux-kernel, dri-devel,
	Krzysztof Kozlowski, Jianhua Lu, linux-leds

Add Kinetic KTZ8866 backlight binding documentation.

Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v2:
  - Remove "items" between "compatible" and "const: kinetic,ktz8866"
  - Change "additionalProperties" to "unevaluatedProperties"

Changes in v3:
  - Add Krzysztof's R-b

 .../leds/backlight/kinetic,ktz8866.yaml       | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml

diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
new file mode 100644
index 000000000000..c63c21bf69d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTZ8866 backlight
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Kinetic Technologies KTZ8866 is a high efficiency 6-sinks led backlight
+  with dual lcd bias power.
+  https://www.kinet-ic.com/ktz8866/
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktz8866
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "kinetic,ktz8866";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&bl_en_default>;
+    };
-- 
2.38.2


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/2] backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
  2022-12-22 12:54 ` Jianhua Lu
@ 2022-12-22 16:39   ` Daniel Thompson
  -1 siblings, 0 replies; 6+ messages in thread
From: Daniel Thompson @ 2022-12-22 16:39 UTC (permalink / raw)
  To: Jianhua Lu
  Cc: Lee Jones, Jingoo Han, Pavel Machek, Rob Herring,
	Krzysztof Kozlowski, Helge Deller, linux-kernel, dri-devel,
	linux-leds, devicetree, linux-fbdev

On Thu, Dec 22, 2022 at 08:54:40PM +0800, Jianhua Lu wrote:
> Add support for Kinetic KTZ8866 backlight, which is used in
> Xiaomi tablet, Mi Pad 5 series. This driver lightly based on
> downstream implementation [1].
> [1] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/elish-r-oss/drivers/video/backlight/ktz8866.c
>
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
> Changes in v2:
>   - Add missing staitc modifier to ktz8866_write function.
>
> Changes in v3:
>   - Add 2022 to Copyright line.
>   - Sort headers
>   - Remove meaningless comment
>   - Use definitions instead of hardcoding.
>   - Add missing maintainer info
>
>  MAINTAINERS                       |   6 +
>  drivers/video/backlight/Kconfig   |   8 ++
>  drivers/video/backlight/Makefile  |   1 +
>  drivers/video/backlight/ktz8866.c | 180 ++++++++++++++++++++++++++++++
>  drivers/video/backlight/ktz8866.h |  31 +++++
>  5 files changed, 226 insertions(+)
>  create mode 100644 drivers/video/backlight/ktz8866.c
>  create mode 100644 drivers/video/backlight/ktz8866.h
>
> diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c
> new file mode 100644
> index 000000000000..ea641bdfc4d2
> --- /dev/null
> +++ b/drivers/video/backlight/ktz8866.c
> @@ -0,0 +1,180 @@
> +
> +#define BL_EN_BIT BIT(6)
> +#define BL_CURRENT_SINKS 0x1F
> +#define BL_OVP_LIMIT 0x33
> +#define LED_CURRENT_RAMPING_TIME 0xBD
> +#define LED_DIMMING_TIME 0x11
> +#define LCD_BIAS_EN 0x9F
> +#define LED_CURRENT 0xF9
> +
> +#define low_3_bit(x) ((x)&0x7)
> +#define high_8_bit(x) ((x >> 3) & 0xFF)

These don't seem to be particularly useful. They are used exactly once
so I think it is better just to implement the shifts directly
in ktz8866_backlight_update_status().

> +struct ktz8866 {
> +	struct i2c_client *client;
> +	struct regmap *regmap;
> +	bool state;
> +};
> +
> +enum {
> +	LED_OFF,
> +	LED_ON,
> +};

Let's remove this emum. It is better to rename state to
led_on in order to make the code read well:

  if (ktz->led_on) ...
  ktz->led_on = true;
  ktz->led_on = false;

> +static void ktz8866_init(struct ktz8866 *ktz)
> +{
> +	/* Enable 1~5 current sinks */
> +	ktz8866_write(ktz, BL_EN, BL_CURRENT_SINKS);
> +	/* Backlight OVP 26.4V */
> +	ktz8866_write(ktz, BL_CFG1, BL_OVP_LIMIT);
> +	/* LED current ramping time 128ms */
> +	ktz8866_write(ktz, BL_CFG2, LED_CURRENT_RAMPING_TIME);
> +	/* LED on/off ramping time 1ms */
> +	ktz8866_write(ktz, BL_DIMMING, LED_DIMMING_TIME);
> +	/* Enable OUTP and OUTN via pin ENP and ENN */
> +	ktz8866_write(ktz, LCD_BIAS_CFG1, LCD_BIAS_EN);
> +	/* Backlight Full-scale LED Current 30.0mA */
> +	ktz8866_write(ktz, FULL_SCALE_CURRENT, LED_CURRENT);
> +}

Are these settings specific to the mipad 5 m/board? Many of these look
like they should be described in the devicetree rather than hardcoded
in the driver.


> +static int ktz8866_probe(struct i2c_client *client,
> +			 const struct i2c_device_id *id)
> +{
> +	struct backlight_device *backlight_dev;
> +	struct backlight_properties props;
> +	struct ktz8866 *ktz;
> +
> +	ktz = devm_kzalloc(&client->dev, sizeof(*ktz), GFP_KERNEL);
> +	if (!ktz)
> +		return -ENOMEM;
> +
> +	ktz->client = client;
> +	ktz->regmap = devm_regmap_init_i2c(client, &ktz8866_regmap_config);
> +
> +	if (IS_ERR(ktz->regmap)) {
> +		dev_err(&client->dev, "failed to init regmap\n");
> +		return PTR_ERR(ktz->regmap);
> +	}
> +
> +	memset(&props, 0, sizeof(props));
> +	props.type = BACKLIGHT_RAW;
> +	props.max_brightness = MAX_BRIGHTNESS;
> +	props.brightness = clamp_t(unsigned int, DEFAULT_BRIGHTNESS, 0,
> +				   props.max_brightness);

Please set the scale property correctly. "Unknown" is never correct for
new drivers.


> +	backlight_dev = devm_backlight_device_register(
> +		&client->dev, "ktz8866-backlight", &client->dev, ktz,
> +		&ktz8866_backlight_ops, &props);
> +
> +	if (IS_ERR(backlight_dev)) {
> +		dev_err(&client->dev, "failed to register backlight device\n");
> +		return PTR_ERR(backlight_dev);
> +	}
> +
> +	ktz8866_init(ktz);
> +
> +	i2c_set_clientdata(client, backlight_dev);
> +	backlight_update_status(backlight_dev);
> +
> +	return 0;
> +}
> diff --git a/drivers/video/backlight/ktz8866.h b/drivers/video/backlight/ktz8866.h
> new file mode 100644
> index 000000000000..b0ed8cbee608
> --- /dev/null
> +++ b/drivers/video/backlight/ktz8866.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Register definitions for Kinetic KTZ8866 backlight
> + *
> + * Copyright (C) 2022 Jianhua Lu <lujianhua000@gmail.com>
> + */
> +
> +#ifndef KTZ8866_H
> +#define KTZ8866_H
> +
> +#define DEVICE_ID 0x01
> +#define BL_CFG1 0x02
> +#define BL_CFG2 0x03
> +#define BL_BRT_LSB 0x04
> +#define BL_BRT_MSB 0x05
> +#define BL_EN 0x08
> +#define LCD_BIAS_CFG1 0x09
> +#define LCD_BIAS_CFG2 0x0A
> +#define LCD_BIAS_CFG3 0x0B
> +#define LCD_BOOST_CFG 0x0C
> +#define OUTP_CFG 0x0D
> +#define OUTN_CFG 0x0E
> +#define FLAG 0x0F
> +#define BL_OPTION1 0x10
> +#define BL_OPTION2 0x11
> +#define PWM2DIG_LSBs 0x12
> +#define PWM2DIG_MSBs 0x13
> +#define BL_DIMMING 0x14
> +#define FULL_SCALE_CURRENT 0x15
> +
> +#endif /* KTZ8866_H */

This header file is not required. Please remove and move any definitions
the driver needs into the C file.


Daniel.

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH v3 1/2] backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
@ 2022-12-22 16:39   ` Daniel Thompson
  0 siblings, 0 replies; 6+ messages in thread
From: Daniel Thompson @ 2022-12-22 16:39 UTC (permalink / raw)
  To: Jianhua Lu
  Cc: devicetree, linux-fbdev, Pavel Machek, Jingoo Han, Helge Deller,
	Lee Jones, linux-kernel, dri-devel, Rob Herring,
	Krzysztof Kozlowski, linux-leds

On Thu, Dec 22, 2022 at 08:54:40PM +0800, Jianhua Lu wrote:
> Add support for Kinetic KTZ8866 backlight, which is used in
> Xiaomi tablet, Mi Pad 5 series. This driver lightly based on
> downstream implementation [1].
> [1] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/elish-r-oss/drivers/video/backlight/ktz8866.c
>
> Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
> ---
> Changes in v2:
>   - Add missing staitc modifier to ktz8866_write function.
>
> Changes in v3:
>   - Add 2022 to Copyright line.
>   - Sort headers
>   - Remove meaningless comment
>   - Use definitions instead of hardcoding.
>   - Add missing maintainer info
>
>  MAINTAINERS                       |   6 +
>  drivers/video/backlight/Kconfig   |   8 ++
>  drivers/video/backlight/Makefile  |   1 +
>  drivers/video/backlight/ktz8866.c | 180 ++++++++++++++++++++++++++++++
>  drivers/video/backlight/ktz8866.h |  31 +++++
>  5 files changed, 226 insertions(+)
>  create mode 100644 drivers/video/backlight/ktz8866.c
>  create mode 100644 drivers/video/backlight/ktz8866.h
>
> diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c
> new file mode 100644
> index 000000000000..ea641bdfc4d2
> --- /dev/null
> +++ b/drivers/video/backlight/ktz8866.c
> @@ -0,0 +1,180 @@
> +
> +#define BL_EN_BIT BIT(6)
> +#define BL_CURRENT_SINKS 0x1F
> +#define BL_OVP_LIMIT 0x33
> +#define LED_CURRENT_RAMPING_TIME 0xBD
> +#define LED_DIMMING_TIME 0x11
> +#define LCD_BIAS_EN 0x9F
> +#define LED_CURRENT 0xF9
> +
> +#define low_3_bit(x) ((x)&0x7)
> +#define high_8_bit(x) ((x >> 3) & 0xFF)

These don't seem to be particularly useful. They are used exactly once
so I think it is better just to implement the shifts directly
in ktz8866_backlight_update_status().

> +struct ktz8866 {
> +	struct i2c_client *client;
> +	struct regmap *regmap;
> +	bool state;
> +};
> +
> +enum {
> +	LED_OFF,
> +	LED_ON,
> +};

Let's remove this emum. It is better to rename state to
led_on in order to make the code read well:

  if (ktz->led_on) ...
  ktz->led_on = true;
  ktz->led_on = false;

> +static void ktz8866_init(struct ktz8866 *ktz)
> +{
> +	/* Enable 1~5 current sinks */
> +	ktz8866_write(ktz, BL_EN, BL_CURRENT_SINKS);
> +	/* Backlight OVP 26.4V */
> +	ktz8866_write(ktz, BL_CFG1, BL_OVP_LIMIT);
> +	/* LED current ramping time 128ms */
> +	ktz8866_write(ktz, BL_CFG2, LED_CURRENT_RAMPING_TIME);
> +	/* LED on/off ramping time 1ms */
> +	ktz8866_write(ktz, BL_DIMMING, LED_DIMMING_TIME);
> +	/* Enable OUTP and OUTN via pin ENP and ENN */
> +	ktz8866_write(ktz, LCD_BIAS_CFG1, LCD_BIAS_EN);
> +	/* Backlight Full-scale LED Current 30.0mA */
> +	ktz8866_write(ktz, FULL_SCALE_CURRENT, LED_CURRENT);
> +}

Are these settings specific to the mipad 5 m/board? Many of these look
like they should be described in the devicetree rather than hardcoded
in the driver.


> +static int ktz8866_probe(struct i2c_client *client,
> +			 const struct i2c_device_id *id)
> +{
> +	struct backlight_device *backlight_dev;
> +	struct backlight_properties props;
> +	struct ktz8866 *ktz;
> +
> +	ktz = devm_kzalloc(&client->dev, sizeof(*ktz), GFP_KERNEL);
> +	if (!ktz)
> +		return -ENOMEM;
> +
> +	ktz->client = client;
> +	ktz->regmap = devm_regmap_init_i2c(client, &ktz8866_regmap_config);
> +
> +	if (IS_ERR(ktz->regmap)) {
> +		dev_err(&client->dev, "failed to init regmap\n");
> +		return PTR_ERR(ktz->regmap);
> +	}
> +
> +	memset(&props, 0, sizeof(props));
> +	props.type = BACKLIGHT_RAW;
> +	props.max_brightness = MAX_BRIGHTNESS;
> +	props.brightness = clamp_t(unsigned int, DEFAULT_BRIGHTNESS, 0,
> +				   props.max_brightness);

Please set the scale property correctly. "Unknown" is never correct for
new drivers.


> +	backlight_dev = devm_backlight_device_register(
> +		&client->dev, "ktz8866-backlight", &client->dev, ktz,
> +		&ktz8866_backlight_ops, &props);
> +
> +	if (IS_ERR(backlight_dev)) {
> +		dev_err(&client->dev, "failed to register backlight device\n");
> +		return PTR_ERR(backlight_dev);
> +	}
> +
> +	ktz8866_init(ktz);
> +
> +	i2c_set_clientdata(client, backlight_dev);
> +	backlight_update_status(backlight_dev);
> +
> +	return 0;
> +}
> diff --git a/drivers/video/backlight/ktz8866.h b/drivers/video/backlight/ktz8866.h
> new file mode 100644
> index 000000000000..b0ed8cbee608
> --- /dev/null
> +++ b/drivers/video/backlight/ktz8866.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Register definitions for Kinetic KTZ8866 backlight
> + *
> + * Copyright (C) 2022 Jianhua Lu <lujianhua000@gmail.com>
> + */
> +
> +#ifndef KTZ8866_H
> +#define KTZ8866_H
> +
> +#define DEVICE_ID 0x01
> +#define BL_CFG1 0x02
> +#define BL_CFG2 0x03
> +#define BL_BRT_LSB 0x04
> +#define BL_BRT_MSB 0x05
> +#define BL_EN 0x08
> +#define LCD_BIAS_CFG1 0x09
> +#define LCD_BIAS_CFG2 0x0A
> +#define LCD_BIAS_CFG3 0x0B
> +#define LCD_BOOST_CFG 0x0C
> +#define OUTP_CFG 0x0D
> +#define OUTN_CFG 0x0E
> +#define FLAG 0x0F
> +#define BL_OPTION1 0x10
> +#define BL_OPTION2 0x11
> +#define PWM2DIG_LSBs 0x12
> +#define PWM2DIG_MSBs 0x13
> +#define BL_DIMMING 0x14
> +#define FULL_SCALE_CURRENT 0x15
> +
> +#endif /* KTZ8866_H */

This header file is not required. Please remove and move any definitions
the driver needs into the C file.


Daniel.

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-12-23  8:46 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-22 12:54 [PATCH v3 1/2] backlight: ktz8866: Add support for Kinetic KTZ8866 backlight Jianhua Lu
2022-12-22 12:54 ` Jianhua Lu
2022-12-22 12:54 ` [PATCH v3 2/2] dt-bindings: leds: backlight: Add " Jianhua Lu
2022-12-22 12:54   ` Jianhua Lu
2022-12-22 16:39 ` [PATCH v3 1/2] backlight: ktz8866: Add support for " Daniel Thompson
2022-12-22 16:39   ` Daniel Thompson

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.