[PATCH v2 0/6] hvcs: Various hvcs device hotplug fixes

[PATCH v2 0/6] hvcs: Various hvcs device hotplug fixes

[Brian King]

This patch series fixes a number of issues with hotplugging
hvcs devices including memory leaks as well as, the inability
to reconnect to a console device after it has been hot added
back, since it was not getting cleaned up properly on the
hotplug remove path.

Changes since initial version:
- Change to use driver default groups to manage attribute lifecycle

Brian King (6):
  hvcs: Fix hvcs port reference counting
  hvcs: Use dev_groups to manage hvcs device attributes
  hvcs: Use driver groups to manage driver attributes
  hvcs: Get reference to tty in remove
  hvcs: Use vhangup in hotplug remove
  hvcs: Synchronize hotplug remove with port free

 drivers/tty/hvc/hvcs.c | 103 +++++++++++++++++++----------------------
 1 file changed, 47 insertions(+), 56 deletions(-)

-- 
2.31.1

[PATCH v2 0/6] hvcs: Various hvcs device hotplug fixes

[Brian King]

This patch series fixes a number of issues with hotplugging
hvcs devices including memory leaks as well as, the inability
to reconnect to a console device after it has been hot added
back, since it was not getting cleaned up properly on the
hotplug remove path.

Changes since initial version:
- Change to use driver default groups to manage attribute lifecycle

Brian King (6):
  hvcs: Fix hvcs port reference counting
  hvcs: Use dev_groups to manage hvcs device attributes
  hvcs: Use driver groups to manage driver attributes
  hvcs: Get reference to tty in remove
  hvcs: Use vhangup in hotplug remove
  hvcs: Synchronize hotplug remove with port free

 drivers/tty/hvc/hvcs.c | 103 +++++++++++++++++++----------------------
 1 file changed, 47 insertions(+), 56 deletions(-)

-- 
2.31.1

[PATCH v2 1/6] hvcs: Fix hvcs port reference counting

[Brian King]

The hvcs driver only ever gets two references to the port. One
at initialization time, and one at install time. Remove the code
that was trying to do multiple port puts for each open, which
would result in more puts than gets.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 4ba24963685e..faf5ccfc561e 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1215,12 +1215,9 @@ static void hvcs_hangup(struct tty_struct * tty)
 {
 	struct hvcs_struct *hvcsd = tty->driver_data;
 	unsigned long flags;
-	int temp_open_count;
 	int irq;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	/* Preserve this so that we know how many kref refs to put */
-	temp_open_count = hvcsd->port.count;
 
 	/*
 	 * Don't kref put inside the spinlock because the destruction
@@ -1247,21 +1244,6 @@ static void hvcs_hangup(struct tty_struct * tty)
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
 	free_irq(irq, hvcsd);
-
-	/*
-	 * We need to kref_put() for every open_count we have since the
-	 * tty_hangup() function doesn't invoke a close per open connection on a
-	 * non-console device.
-	 */
-	while(temp_open_count) {
-		--temp_open_count;
-		/*
-		 * The final put will trigger destruction of the hvcs_struct.
-		 * NOTE:  If this hangup was signaled from user space then the
-		 * final put will never happen.
-		 */
-		tty_port_put(&hvcsd->port);
-	}
 }
 
 /*
-- 
2.31.1

[PATCH v2 1/6] hvcs: Fix hvcs port reference counting

[Brian King]

The hvcs driver only ever gets two references to the port. One
at initialization time, and one at install time. Remove the code
that was trying to do multiple port puts for each open, which
would result in more puts than gets.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 4ba24963685e..faf5ccfc561e 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1215,12 +1215,9 @@ static void hvcs_hangup(struct tty_struct * tty)
 {
 	struct hvcs_struct *hvcsd = tty->driver_data;
 	unsigned long flags;
-	int temp_open_count;
 	int irq;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	/* Preserve this so that we know how many kref refs to put */
-	temp_open_count = hvcsd->port.count;
 
 	/*
 	 * Don't kref put inside the spinlock because the destruction
@@ -1247,21 +1244,6 @@ static void hvcs_hangup(struct tty_struct * tty)
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
 	free_irq(irq, hvcsd);
-
-	/*
-	 * We need to kref_put() for every open_count we have since the
-	 * tty_hangup() function doesn't invoke a close per open connection on a
-	 * non-console device.
-	 */
-	while(temp_open_count) {
-		--temp_open_count;
-		/*
-		 * The final put will trigger destruction of the hvcs_struct.
-		 * NOTE:  If this hangup was signaled from user space then the
-		 * final put will never happen.
-		 */
-		tty_port_put(&hvcsd->port);
-	}
 }
 
 /*
-- 
2.31.1

[PATCH v2 2/6] hvcs: Use dev_groups to manage hvcs device attributes

[Brian King]

Use the dev_groups functionality to manage the attribute groups
for hvcs devices. This simplifies the code and also eliminates
errors coming from kernfs when attempting to remove a console
device that is in use.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index faf5ccfc561e..7f79444b4d89 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -432,7 +432,7 @@ static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr
 
 static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL);
 
-static struct attribute *hvcs_attrs[] = {
+static struct attribute *hvcs_dev_attrs[] = {
 	&dev_attr_partner_vtys.attr,
 	&dev_attr_partner_clcs.attr,
 	&dev_attr_current_vty.attr,
@@ -441,8 +441,13 @@ static struct attribute *hvcs_attrs[] = {
 	NULL,
 };
 
-static struct attribute_group hvcs_attr_group = {
-	.attrs = hvcs_attrs,
+static struct attribute_group hvcs_attr_dev_group = {
+	.attrs = hvcs_dev_attrs,
+};
+
+const static struct attribute_group *hvcs_attr_dev_groups[] = {
+	&hvcs_attr_dev_group,
+	NULL,
 };
 
 static ssize_t rescan_show(struct device_driver *ddp, char *buf)
@@ -688,8 +693,6 @@ static void hvcs_destruct_port(struct tty_port *p)
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 	spin_unlock(&hvcs_structs_lock);
 
-	sysfs_remove_group(&vdev->dev.kobj, &hvcs_attr_group);
-
 	kfree(hvcsd);
 }
 
@@ -721,7 +724,6 @@ static int hvcs_probe(
 {
 	struct hvcs_struct *hvcsd;
 	int index, rc;
-	int retval;
 
 	if (!dev || !id) {
 		printk(KERN_ERR "HVCS: probed with invalid parameter.\n");
@@ -778,13 +780,6 @@ static int hvcs_probe(
 	list_add_tail(&(hvcsd->next), &hvcs_structs);
 	spin_unlock(&hvcs_structs_lock);
 
-	retval = sysfs_create_group(&dev->dev.kobj, &hvcs_attr_group);
-	if (retval) {
-		printk(KERN_ERR "HVCS: Can't create sysfs attrs for vty-server@%X\n",
-		       hvcsd->vdev->unit_address);
-		return retval;
-	}
-
 	printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address);
 
 	/*
@@ -831,6 +826,9 @@ static struct vio_driver hvcs_vio_driver = {
 	.probe		= hvcs_probe,
 	.remove		= hvcs_remove,
 	.name		= hvcs_driver_name,
+	.driver = {
+		.dev_groups = hvcs_attr_dev_groups,
+	},
 };
 
 /* Only called from hvcs_get_pi please */
-- 
2.31.1

[PATCH v2 2/6] hvcs: Use dev_groups to manage hvcs device attributes

[Brian King]

Use the dev_groups functionality to manage the attribute groups
for hvcs devices. This simplifies the code and also eliminates
errors coming from kernfs when attempting to remove a console
device that is in use.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index faf5ccfc561e..7f79444b4d89 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -432,7 +432,7 @@ static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr
 
 static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL);
 
-static struct attribute *hvcs_attrs[] = {
+static struct attribute *hvcs_dev_attrs[] = {
 	&dev_attr_partner_vtys.attr,
 	&dev_attr_partner_clcs.attr,
 	&dev_attr_current_vty.attr,
@@ -441,8 +441,13 @@ static struct attribute *hvcs_attrs[] = {
 	NULL,
 };
 
-static struct attribute_group hvcs_attr_group = {
-	.attrs = hvcs_attrs,
+static struct attribute_group hvcs_attr_dev_group = {
+	.attrs = hvcs_dev_attrs,
+};
+
+const static struct attribute_group *hvcs_attr_dev_groups[] = {
+	&hvcs_attr_dev_group,
+	NULL,
 };
 
 static ssize_t rescan_show(struct device_driver *ddp, char *buf)
@@ -688,8 +693,6 @@ static void hvcs_destruct_port(struct tty_port *p)
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 	spin_unlock(&hvcs_structs_lock);
 
-	sysfs_remove_group(&vdev->dev.kobj, &hvcs_attr_group);
-
 	kfree(hvcsd);
 }
 
@@ -721,7 +724,6 @@ static int hvcs_probe(
 {
 	struct hvcs_struct *hvcsd;
 	int index, rc;
-	int retval;
 
 	if (!dev || !id) {
 		printk(KERN_ERR "HVCS: probed with invalid parameter.\n");
@@ -778,13 +780,6 @@ static int hvcs_probe(
 	list_add_tail(&(hvcsd->next), &hvcs_structs);
 	spin_unlock(&hvcs_structs_lock);
 
-	retval = sysfs_create_group(&dev->dev.kobj, &hvcs_attr_group);
-	if (retval) {
-		printk(KERN_ERR "HVCS: Can't create sysfs attrs for vty-server@%X\n",
-		       hvcsd->vdev->unit_address);
-		return retval;
-	}
-
 	printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address);
 
 	/*
@@ -831,6 +826,9 @@ static struct vio_driver hvcs_vio_driver = {
 	.probe		= hvcs_probe,
 	.remove		= hvcs_remove,
 	.name		= hvcs_driver_name,
+	.driver = {
+		.dev_groups = hvcs_attr_dev_groups,
+	},
 };
 
 /* Only called from hvcs_get_pi please */
-- 
2.31.1

[PATCH v2 3/6] hvcs: Use driver groups to manage driver attributes

[Brian King]

Rather than manually creating attributes for the hvcs driver,
let the driver core do this for us. This also fixes some hotplug
remove issues and ensures that cleanup of these attributes
is done in the right order.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 7f79444b4d89..5de7ad555540 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -473,6 +473,20 @@ static ssize_t rescan_store(struct device_driver *ddp, const char * buf,
 
 static DRIVER_ATTR_RW(rescan);
 
+static struct attribute *hvcs_attrs[] = {
+	&driver_attr_rescan.attr,
+	NULL,
+};
+
+static struct attribute_group hvcs_attr_group = {
+	.attrs = hvcs_attrs,
+};
+
+const static struct attribute_group *hvcs_attr_groups[] = {
+	&hvcs_attr_group,
+	NULL,
+};
+
 static void hvcs_kick(void)
 {
 	hvcs_kicked = 1;
@@ -827,6 +841,7 @@ static struct vio_driver hvcs_vio_driver = {
 	.remove		= hvcs_remove,
 	.name		= hvcs_driver_name,
 	.driver = {
+		.groups = hvcs_attr_groups,
 		.dev_groups = hvcs_attr_dev_groups,
 	},
 };
@@ -1505,13 +1520,6 @@ static int __init hvcs_module_init(void)
 
 	pr_info("HVCS: Driver registered.\n");
 
-	/* This needs to be done AFTER the vio_register_driver() call or else
-	 * the kobjects won't be initialized properly.
-	 */
-	rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan);
-	if (rc)
-		pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc);
-
 	return 0;
 }
 
@@ -1536,8 +1544,6 @@ static void __exit hvcs_module_exit(void)
 	hvcs_pi_buff = NULL;
 	spin_unlock(&hvcs_pi_lock);
 
-	driver_remove_file(&hvcs_vio_driver.driver, &driver_attr_rescan);
-
 	tty_unregister_driver(hvcs_tty_driver);
 
 	hvcs_free_index_list();
-- 
2.31.1

[PATCH v2 3/6] hvcs: Use driver groups to manage driver attributes

[Brian King]

Rather than manually creating attributes for the hvcs driver,
let the driver core do this for us. This also fixes some hotplug
remove issues and ensures that cleanup of these attributes
is done in the right order.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 7f79444b4d89..5de7ad555540 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -473,6 +473,20 @@ static ssize_t rescan_store(struct device_driver *ddp, const char * buf,
 
 static DRIVER_ATTR_RW(rescan);
 
+static struct attribute *hvcs_attrs[] = {
+	&driver_attr_rescan.attr,
+	NULL,
+};
+
+static struct attribute_group hvcs_attr_group = {
+	.attrs = hvcs_attrs,
+};
+
+const static struct attribute_group *hvcs_attr_groups[] = {
+	&hvcs_attr_group,
+	NULL,
+};
+
 static void hvcs_kick(void)
 {
 	hvcs_kicked = 1;
@@ -827,6 +841,7 @@ static struct vio_driver hvcs_vio_driver = {
 	.remove		= hvcs_remove,
 	.name		= hvcs_driver_name,
 	.driver = {
+		.groups = hvcs_attr_groups,
 		.dev_groups = hvcs_attr_dev_groups,
 	},
 };
@@ -1505,13 +1520,6 @@ static int __init hvcs_module_init(void)
 
 	pr_info("HVCS: Driver registered.\n");
 
-	/* This needs to be done AFTER the vio_register_driver() call or else
-	 * the kobjects won't be initialized properly.
-	 */
-	rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan);
-	if (rc)
-		pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc);
-
 	return 0;
 }
 
@@ -1536,8 +1544,6 @@ static void __exit hvcs_module_exit(void)
 	hvcs_pi_buff = NULL;
 	spin_unlock(&hvcs_pi_lock);
 
-	driver_remove_file(&hvcs_vio_driver.driver, &driver_attr_rescan);
-
 	tty_unregister_driver(hvcs_tty_driver);
 
 	hvcs_free_index_list();
-- 
2.31.1

[PATCH v2 4/6] hvcs: Get reference to tty in remove

[Brian King]

Grab a reference to the tty when removing the hvcs to ensure
it does not get freed unexpectedly.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 5de7ad555540..04c58ac4fec2 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -813,7 +813,7 @@ static void hvcs_remove(struct vio_dev *dev)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
-	tty = hvcsd->port.tty;
+	tty = tty_port_tty_get(&hvcsd->port);
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
@@ -828,8 +828,10 @@ static void hvcs_remove(struct vio_dev *dev)
 	 * hvcs_hangup.  The tty should always be valid at this time unless a
 	 * simultaneous tty close already cleaned up the hvcs_struct.
 	 */
-	if (tty)
+	if (tty) {
 		tty_hangup(tty);
+		tty_kref_put(tty);
+	}
 
 	printk(KERN_INFO "HVCS: vty-server@%X removed from the"
 			" vio bus.\n", dev->unit_address);
-- 
2.31.1

[PATCH v2 4/6] hvcs: Get reference to tty in remove

[Brian King]

Grab a reference to the tty when removing the hvcs to ensure
it does not get freed unexpectedly.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 5de7ad555540..04c58ac4fec2 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -813,7 +813,7 @@ static void hvcs_remove(struct vio_dev *dev)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
-	tty = hvcsd->port.tty;
+	tty = tty_port_tty_get(&hvcsd->port);
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
@@ -828,8 +828,10 @@ static void hvcs_remove(struct vio_dev *dev)
 	 * hvcs_hangup.  The tty should always be valid at this time unless a
 	 * simultaneous tty close already cleaned up the hvcs_struct.
 	 */
-	if (tty)
+	if (tty) {
 		tty_hangup(tty);
+		tty_kref_put(tty);
+	}
 
 	printk(KERN_INFO "HVCS: vty-server@%X removed from the"
 			" vio bus.\n", dev->unit_address);
-- 
2.31.1

[PATCH v2 5/6] hvcs: Use vhangup in hotplug remove

[Brian King]

When hotplug removing an hvcs device, we need to ensure the
hangup processing is done prior to exiting the remove function,
so use tty_vhangup to do the hangup processing directly
rather than using tty_hangup which simply schedules the hangup
work for later execution.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 04c58ac4fec2..2e9e45f06916 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -824,12 +824,11 @@ static void hvcs_remove(struct vio_dev *dev)
 	tty_port_put(&hvcsd->port);
 
 	/*
-	 * The hangup is a scheduled function which will auto chain call
-	 * hvcs_hangup.  The tty should always be valid at this time unless a
+	 * The tty should always be valid at this time unless a
 	 * simultaneous tty close already cleaned up the hvcs_struct.
 	 */
 	if (tty) {
-		tty_hangup(tty);
+		tty_vhangup(tty);
 		tty_kref_put(tty);
 	}
 
-- 
2.31.1

[PATCH v2 5/6] hvcs: Use vhangup in hotplug remove

[Brian King]

When hotplug removing an hvcs device, we need to ensure the
hangup processing is done prior to exiting the remove function,
so use tty_vhangup to do the hangup processing directly
rather than using tty_hangup which simply schedules the hangup
work for later execution.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 04c58ac4fec2..2e9e45f06916 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -824,12 +824,11 @@ static void hvcs_remove(struct vio_dev *dev)
 	tty_port_put(&hvcsd->port);
 
 	/*
-	 * The hangup is a scheduled function which will auto chain call
-	 * hvcs_hangup.  The tty should always be valid at this time unless a
+	 * The tty should always be valid at this time unless a
 	 * simultaneous tty close already cleaned up the hvcs_struct.
 	 */
 	if (tty) {
-		tty_hangup(tty);
+		tty_vhangup(tty);
 		tty_kref_put(tty);
 	}
 
-- 
2.31.1

[PATCH v2 6/6] hvcs: Synchronize hotplug remove with port free

[Brian King]

Synchronizes hotplug remove with the freeing of the port.
This ensures we have freed all the memory associated with
this port and are not leaking memory.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 2e9e45f06916..c360965e9c1b 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -52,6 +52,7 @@
 
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/kref.h>
@@ -285,6 +286,7 @@ struct hvcs_struct {
 	char p_location_code[HVCS_CLC_LENGTH + 1]; /* CLC + Null Term */
 	struct list_head next; /* list management */
 	struct vio_dev *vdev;
+	struct completion *destroyed;
 };
 
 static LIST_HEAD(hvcs_structs);
@@ -677,11 +679,13 @@ static void hvcs_destruct_port(struct tty_port *p)
 {
 	struct hvcs_struct *hvcsd = container_of(p, struct hvcs_struct, port);
 	struct vio_dev *vdev;
+	struct completion *comp;
 	unsigned long flags;
 
 	spin_lock(&hvcs_structs_lock);
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
+	comp = hvcsd->destroyed;
 	/* the list_del poisons the pointers */
 	list_del(&(hvcsd->next));
 
@@ -701,6 +705,7 @@ static void hvcs_destruct_port(struct tty_port *p)
 
 	hvcsd->p_unit_address = 0;
 	hvcsd->p_partition_ID = 0;
+	hvcsd->destroyed = NULL;
 	hvcs_return_index(hvcsd->index);
 	memset(&hvcsd->p_location_code[0], 0x00, HVCS_CLC_LENGTH + 1);
 
@@ -708,6 +713,8 @@ static void hvcs_destruct_port(struct tty_port *p)
 	spin_unlock(&hvcs_structs_lock);
 
 	kfree(hvcsd);
+	if (comp)
+		complete(comp);
 }
 
 static const struct tty_port_operations hvcs_port_ops = {
@@ -806,6 +813,7 @@ static int hvcs_probe(
 static void hvcs_remove(struct vio_dev *dev)
 {
 	struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
+	DECLARE_COMPLETION_ONSTACK(comp);
 	unsigned long flags;
 	struct tty_struct *tty;
 
@@ -813,16 +821,11 @@ static void hvcs_remove(struct vio_dev *dev)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
+	hvcsd->destroyed = &comp;
 	tty = tty_port_tty_get(&hvcsd->port);
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
-	/*
-	 * Let the last holder of this object cause it to be removed, which
-	 * would probably be tty_hangup below.
-	 */
-	tty_port_put(&hvcsd->port);
-
 	/*
 	 * The tty should always be valid at this time unless a
 	 * simultaneous tty close already cleaned up the hvcs_struct.
@@ -832,6 +835,8 @@ static void hvcs_remove(struct vio_dev *dev)
 		tty_kref_put(tty);
 	}
 
+	tty_port_put(&hvcsd->port);
+	wait_for_completion(&comp);
 	printk(KERN_INFO "HVCS: vty-server@%X removed from the"
 			" vio bus.\n", dev->unit_address);
 };
@@ -1185,7 +1190,10 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 	hvcsd = tty->driver_data;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	if (--hvcsd->port.count == 0) {
+	if (hvcsd->port.count == 0) {
+		spin_unlock_irqrestore(&hvcsd->lock, flags);
+		return;
+	} else if (--hvcsd->port.count == 0) {
 
 		vio_disable_interrupts(hvcsd->vdev);
 
@@ -1241,11 +1249,7 @@ static void hvcs_hangup(struct tty_struct * tty)
 	vio_disable_interrupts(hvcsd->vdev);
 
 	hvcsd->todo_mask = 0;
-
-	/* I don't think the tty needs the hvcs_struct pointer after a hangup */
-	tty->driver_data = NULL;
 	hvcsd->port.tty = NULL;
-
 	hvcsd->port.count = 0;
 
 	/* This will drop any buffered data on the floor which is OK in a hangup
-- 
2.31.1

[PATCH v2 6/6] hvcs: Synchronize hotplug remove with port free

[Brian King]

Synchronizes hotplug remove with the freeing of the port.
This ensures we have freed all the memory associated with
this port and are not leaking memory.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/tty/hvc/hvcs.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 2e9e45f06916..c360965e9c1b 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -52,6 +52,7 @@
 
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/kref.h>
@@ -285,6 +286,7 @@ struct hvcs_struct {
 	char p_location_code[HVCS_CLC_LENGTH + 1]; /* CLC + Null Term */
 	struct list_head next; /* list management */
 	struct vio_dev *vdev;
+	struct completion *destroyed;
 };
 
 static LIST_HEAD(hvcs_structs);
@@ -677,11 +679,13 @@ static void hvcs_destruct_port(struct tty_port *p)
 {
 	struct hvcs_struct *hvcsd = container_of(p, struct hvcs_struct, port);
 	struct vio_dev *vdev;
+	struct completion *comp;
 	unsigned long flags;
 
 	spin_lock(&hvcs_structs_lock);
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
+	comp = hvcsd->destroyed;
 	/* the list_del poisons the pointers */
 	list_del(&(hvcsd->next));
 
@@ -701,6 +705,7 @@ static void hvcs_destruct_port(struct tty_port *p)
 
 	hvcsd->p_unit_address = 0;
 	hvcsd->p_partition_ID = 0;
+	hvcsd->destroyed = NULL;
 	hvcs_return_index(hvcsd->index);
 	memset(&hvcsd->p_location_code[0], 0x00, HVCS_CLC_LENGTH + 1);
 
@@ -708,6 +713,8 @@ static void hvcs_destruct_port(struct tty_port *p)
 	spin_unlock(&hvcs_structs_lock);
 
 	kfree(hvcsd);
+	if (comp)
+		complete(comp);
 }
 
 static const struct tty_port_operations hvcs_port_ops = {
@@ -806,6 +813,7 @@ static int hvcs_probe(
 static void hvcs_remove(struct vio_dev *dev)
 {
 	struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
+	DECLARE_COMPLETION_ONSTACK(comp);
 	unsigned long flags;
 	struct tty_struct *tty;
 
@@ -813,16 +821,11 @@ static void hvcs_remove(struct vio_dev *dev)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
+	hvcsd->destroyed = &comp;
 	tty = tty_port_tty_get(&hvcsd->port);
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
-	/*
-	 * Let the last holder of this object cause it to be removed, which
-	 * would probably be tty_hangup below.
-	 */
-	tty_port_put(&hvcsd->port);
-
 	/*
 	 * The tty should always be valid at this time unless a
 	 * simultaneous tty close already cleaned up the hvcs_struct.
@@ -832,6 +835,8 @@ static void hvcs_remove(struct vio_dev *dev)
 		tty_kref_put(tty);
 	}
 
+	tty_port_put(&hvcsd->port);
+	wait_for_completion(&comp);
 	printk(KERN_INFO "HVCS: vty-server@%X removed from the"
 			" vio bus.\n", dev->unit_address);
 };
@@ -1185,7 +1190,10 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 	hvcsd = tty->driver_data;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	if (--hvcsd->port.count == 0) {
+	if (hvcsd->port.count == 0) {
+		spin_unlock_irqrestore(&hvcsd->lock, flags);
+		return;
+	} else if (--hvcsd->port.count == 0) {
 
 		vio_disable_interrupts(hvcsd->vdev);
 
@@ -1241,11 +1249,7 @@ static void hvcs_hangup(struct tty_struct * tty)
 	vio_disable_interrupts(hvcsd->vdev);
 
 	hvcsd->todo_mask = 0;
-
-	/* I don't think the tty needs the hvcs_struct pointer after a hangup */
-	tty->driver_data = NULL;
 	hvcsd->port.tty = NULL;
-
 	hvcsd->port.count = 0;
 
 	/* This will drop any buffered data on the floor which is OK in a hangup
-- 
2.31.1

Re: [PATCH v2 2/6] hvcs: Use dev_groups to manage hvcs device attributes

[Greg KH]

On Thu, Feb 02, 2023 at 04:28:00PM -0600, Brian King wrote:
> Use the dev_groups functionality to manage the attribute groups
> for hvcs devices. This simplifies the code and also eliminates
> errors coming from kernfs when attempting to remove a console
> device that is in use.
> 
> Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
> ---
>  drivers/tty/hvc/hvcs.c | 24 +++++++++++-------------
>  1 file changed, 11 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
> index faf5ccfc561e..7f79444b4d89 100644
> --- a/drivers/tty/hvc/hvcs.c
> +++ b/drivers/tty/hvc/hvcs.c
> @@ -432,7 +432,7 @@ static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr
>  
>  static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL);
>  
> -static struct attribute *hvcs_attrs[] = {
> +static struct attribute *hvcs_dev_attrs[] = {
>  	&dev_attr_partner_vtys.attr,
>  	&dev_attr_partner_clcs.attr,
>  	&dev_attr_current_vty.attr,
> @@ -441,8 +441,13 @@ static struct attribute *hvcs_attrs[] = {
>  	NULL,
>  };
>  
> -static struct attribute_group hvcs_attr_group = {
> -	.attrs = hvcs_attrs,
> +static struct attribute_group hvcs_attr_dev_group = {
> +	.attrs = hvcs_dev_attrs,
> +};
> +
> +const static struct attribute_group *hvcs_attr_dev_groups[] = {
> +	&hvcs_attr_dev_group,
> +	NULL,
>  };

Why not just use the ATTRIBUTE_GROUPS() macro here?

thanks,

greg k-h

Re: [PATCH v2 2/6] hvcs: Use dev_groups to manage hvcs device attributes

[Greg KH]

On Thu, Feb 02, 2023 at 04:28:00PM -0600, Brian King wrote:
> Use the dev_groups functionality to manage the attribute groups
> for hvcs devices. This simplifies the code and also eliminates
> errors coming from kernfs when attempting to remove a console
> device that is in use.
> 
> Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
> ---
>  drivers/tty/hvc/hvcs.c | 24 +++++++++++-------------
>  1 file changed, 11 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
> index faf5ccfc561e..7f79444b4d89 100644
> --- a/drivers/tty/hvc/hvcs.c
> +++ b/drivers/tty/hvc/hvcs.c
> @@ -432,7 +432,7 @@ static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr
>  
>  static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL);
>  
> -static struct attribute *hvcs_attrs[] = {
> +static struct attribute *hvcs_dev_attrs[] = {
>  	&dev_attr_partner_vtys.attr,
>  	&dev_attr_partner_clcs.attr,
>  	&dev_attr_current_vty.attr,
> @@ -441,8 +441,13 @@ static struct attribute *hvcs_attrs[] = {
>  	NULL,
>  };
>  
> -static struct attribute_group hvcs_attr_group = {
> -	.attrs = hvcs_attrs,
> +static struct attribute_group hvcs_attr_dev_group = {
> +	.attrs = hvcs_dev_attrs,
> +};
> +
> +const static struct attribute_group *hvcs_attr_dev_groups[] = {
> +	&hvcs_attr_dev_group,
> +	NULL,
>  };

Why not just use the ATTRIBUTE_GROUPS() macro here?

thanks,

greg k-h

Re: [PATCH v2 1/6] hvcs: Fix hvcs port reference counting

[Greg KH]

On Thu, Feb 02, 2023 at 04:27:59PM -0600, Brian King wrote:
> The hvcs driver only ever gets two references to the port. One
> at initialization time, and one at install time. Remove the code
> that was trying to do multiple port puts for each open, which
> would result in more puts than gets.
> 
> Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
> ---
>  drivers/tty/hvc/hvcs.c | 18 ------------------
>  1 file changed, 18 deletions(-)

I already took this patch (you got an email about it), no need to send
it again.

thanks,

greg k-h

Re: [PATCH v2 1/6] hvcs: Fix hvcs port reference counting

[Greg KH]

On Thu, Feb 02, 2023 at 04:27:59PM -0600, Brian King wrote:
> The hvcs driver only ever gets two references to the port. One
> at initialization time, and one at install time. Remove the code
> that was trying to do multiple port puts for each open, which
> would result in more puts than gets.
> 
> Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
> ---
>  drivers/tty/hvc/hvcs.c | 18 ------------------
>  1 file changed, 18 deletions(-)

I already took this patch (you got an email about it), no need to send
it again.

thanks,

greg k-h

Re: [PATCH v2 3/6] hvcs: Use driver groups to manage driver attributes

[Greg KH]

On Thu, Feb 02, 2023 at 04:28:01PM -0600, Brian King wrote:
> Rather than manually creating attributes for the hvcs driver,
> let the driver core do this for us. This also fixes some hotplug
> remove issues and ensures that cleanup of these attributes
> is done in the right order.
> 
> Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
> ---
>  drivers/tty/hvc/hvcs.c | 24 +++++++++++++++---------
>  1 file changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
> index 7f79444b4d89..5de7ad555540 100644
> --- a/drivers/tty/hvc/hvcs.c
> +++ b/drivers/tty/hvc/hvcs.c
> @@ -473,6 +473,20 @@ static ssize_t rescan_store(struct device_driver *ddp, const char * buf,
>  
>  static DRIVER_ATTR_RW(rescan);
>  
> +static struct attribute *hvcs_attrs[] = {
> +	&driver_attr_rescan.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group hvcs_attr_group = {
> +	.attrs = hvcs_attrs,
> +};
> +
> +const static struct attribute_group *hvcs_attr_groups[] = {
> +	&hvcs_attr_group,
> +	NULL,
> +};

Again, ATTRIBUTE_GROUPS()?

thanks,

greg k-h

Re: [PATCH v2 3/6] hvcs: Use driver groups to manage driver attributes

[Greg KH]

On Thu, Feb 02, 2023 at 04:28:01PM -0600, Brian King wrote:
> Rather than manually creating attributes for the hvcs driver,
> let the driver core do this for us. This also fixes some hotplug
> remove issues and ensures that cleanup of these attributes
> is done in the right order.
> 
> Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
> ---
>  drivers/tty/hvc/hvcs.c | 24 +++++++++++++++---------
>  1 file changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
> index 7f79444b4d89..5de7ad555540 100644
> --- a/drivers/tty/hvc/hvcs.c
> +++ b/drivers/tty/hvc/hvcs.c
> @@ -473,6 +473,20 @@ static ssize_t rescan_store(struct device_driver *ddp, const char * buf,
>  
>  static DRIVER_ATTR_RW(rescan);
>  
> +static struct attribute *hvcs_attrs[] = {
> +	&driver_attr_rescan.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group hvcs_attr_group = {
> +	.attrs = hvcs_attrs,
> +};
> +
> +const static struct attribute_group *hvcs_attr_groups[] = {
> +	&hvcs_attr_group,
> +	NULL,
> +};

Again, ATTRIBUTE_GROUPS()?

thanks,

greg k-h