[PATCH] arm64: defconfig: Enable Qualcomm SM8250 audio config

[PATCH] arm64: defconfig: Enable Qualcomm SM8250 audio config

[Dmitry Baryshkov]

Enable ASoC platform driver and condec drivers for Qualcomm SM8250
platform and devices based on it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/configs/defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 838301650a79..9b1c438aa17f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -505,6 +505,7 @@ CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SDM845=y
 CONFIG_PINCTRL_SM8150=y
 CONFIG_PINCTRL_SM8250=y
+CONFIG_PINCTRL_LPASS_LPI=y
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
@@ -724,6 +725,7 @@ CONFIG_SND_SOC_QCOM=m
 CONFIG_SND_SOC_APQ8016_SBC=m
 CONFIG_SND_SOC_MSM8996=m
 CONFIG_SND_SOC_SDM845=m
+CONFIG_SND_SOC_SM8250=m
 CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
 CONFIG_SND_SOC_ROCKCHIP_RT5645=m
@@ -747,6 +749,8 @@ CONFIG_SND_SOC_TAS571X=m
 CONFIG_SND_SOC_WCD934X=m
 CONFIG_SND_SOC_WM8904=m
 CONFIG_SND_SOC_WSA881X=m
+CONFIG_SND_SOC_LPASS_WSA_MACRO=m
+CONFIG_SND_SOC_LPASS_VA_MACRO=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_I2C_HID=m
@@ -932,6 +936,7 @@ CONFIG_SM_GCC_8250=y
 CONFIG_SM_GPUCC_8150=y
 CONFIG_SM_GPUCC_8250=y
 CONFIG_QCOM_HFPLL=y
+CONFIG_CLK_GFM_LPASS_SM8250=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_ARM_MHU=y
-- 
2.29.2

Re: [PATCH] arm64: defconfig: Enable Qualcomm SM8250 audio config

[Bjorn Andersson]

On Mon 28 Dec 09:29 CST 2020, Dmitry Baryshkov wrote:

> Enable ASoC platform driver and condec drivers for Qualcomm SM8250
> platform and devices based on it.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  arch/arm64/configs/defconfig | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 838301650a79..9b1c438aa17f 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -505,6 +505,7 @@ CONFIG_PINCTRL_SC7180=y
>  CONFIG_PINCTRL_SDM845=y
>  CONFIG_PINCTRL_SM8150=y
>  CONFIG_PINCTRL_SM8250=y
> +CONFIG_PINCTRL_LPASS_LPI=y

The reason for keeping the TLMM drivers builtin is because they will
otherwise prevent the UART from probing before we hit userspace (leaving
us without a console). But this should be possible to land as =m
instead?

>  CONFIG_GPIO_ALTERA=m
>  CONFIG_GPIO_DAVINCI=y
>  CONFIG_GPIO_DWAPB=y
> @@ -724,6 +725,7 @@ CONFIG_SND_SOC_QCOM=m
>  CONFIG_SND_SOC_APQ8016_SBC=m
>  CONFIG_SND_SOC_MSM8996=m
>  CONFIG_SND_SOC_SDM845=m
> +CONFIG_SND_SOC_SM8250=m
>  CONFIG_SND_SOC_ROCKCHIP=m
>  CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
>  CONFIG_SND_SOC_ROCKCHIP_RT5645=m
> @@ -747,6 +749,8 @@ CONFIG_SND_SOC_TAS571X=m
>  CONFIG_SND_SOC_WCD934X=m
>  CONFIG_SND_SOC_WM8904=m
>  CONFIG_SND_SOC_WSA881X=m
> +CONFIG_SND_SOC_LPASS_WSA_MACRO=m
> +CONFIG_SND_SOC_LPASS_VA_MACRO=m
>  CONFIG_SND_SIMPLE_CARD=m
>  CONFIG_SND_AUDIO_GRAPH_CARD=m
>  CONFIG_I2C_HID=m
> @@ -932,6 +936,7 @@ CONFIG_SM_GCC_8250=y
>  CONFIG_SM_GPUCC_8150=y
>  CONFIG_SM_GPUCC_8250=y
>  CONFIG_QCOM_HFPLL=y
> +CONFIG_CLK_GFM_LPASS_SM8250=y

This clock controller seems to only provide clocks needed by audio (and
no power-domains), could we therefor instead make it =m?

Regards,
Bjorn

>  CONFIG_HWSPINLOCK=y
>  CONFIG_HWSPINLOCK_QCOM=y
>  CONFIG_ARM_MHU=y
> -- 
> 2.29.2
>