[PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Phillip Potter]

Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
to strscpy calls. As return values were not checked for these three
calls before, change should be safe as functionality is equivalent.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---

v2: Modified changelog to take account of feedback from Greg KH.

 drivers/staging/octeon/ethernet-mdio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index b0fd083a5bf2..b3049108edc4 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -21,9 +21,9 @@
 static void cvm_oct_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
-	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
-	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
-	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
+	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
+	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
 }
 
 static int cvm_oct_nway_reset(struct net_device *dev)
-- 
2.29.2

[PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Phillip Potter]

Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
to strscpy calls. As return values were not checked for these three
calls before, change should be safe as functionality is equivalent.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---

v2: Modified changelog to take account of feedback from Greg KH.

 drivers/staging/octeon/ethernet-mdio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index b0fd083a5bf2..b3049108edc4 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -21,9 +21,9 @@
 static void cvm_oct_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
-	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
-	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
-	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
+	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
+	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
 }
 
 static int cvm_oct_nway_reset(struct net_device *dev)
-- 
2.29.2

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Greg KH]

On Sun, Feb 07, 2021 at 03:13:20PM +0000, Phillip Potter wrote:
> Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
> to strscpy calls. As return values were not checked for these three
> calls before, change should be safe as functionality is equivalent.
> 
> Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> ---
> 
> v2: Modified changelog to take account of feedback from Greg KH.
> 
>  drivers/staging/octeon/ethernet-mdio.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
> index b0fd083a5bf2..b3049108edc4 100644
> --- a/drivers/staging/octeon/ethernet-mdio.c
> +++ b/drivers/staging/octeon/ethernet-mdio.c
> @@ -21,9 +21,9 @@
>  static void cvm_oct_get_drvinfo(struct net_device *dev,
>  				struct ethtool_drvinfo *info)
>  {
> -	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> -	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
> -	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
> +	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> +	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
> +	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
>  }
>  
>  static int cvm_oct_nway_reset(struct net_device *dev)

Sorry, this does not apply to my tree, someone already did this
conversion before you :(

greg k-h

Re: [PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Greg KH]

On Sun, Feb 07, 2021 at 03:13:20PM +0000, Phillip Potter wrote:
> Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
> to strscpy calls. As return values were not checked for these three
> calls before, change should be safe as functionality is equivalent.
> 
> Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> ---
> 
> v2: Modified changelog to take account of feedback from Greg KH.
> 
>  drivers/staging/octeon/ethernet-mdio.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
> index b0fd083a5bf2..b3049108edc4 100644
> --- a/drivers/staging/octeon/ethernet-mdio.c
> +++ b/drivers/staging/octeon/ethernet-mdio.c
> @@ -21,9 +21,9 @@
>  static void cvm_oct_get_drvinfo(struct net_device *dev,
>  				struct ethtool_drvinfo *info)
>  {
> -	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> -	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
> -	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
> +	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> +	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
> +	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
>  }
>  
>  static int cvm_oct_nway_reset(struct net_device *dev)

Sorry, this does not apply to my tree, someone already did this
conversion before you :(

greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Phillip Potter]

On Sun, Feb 07, 2021 at 04:35:06PM +0100, Greg KH wrote:
> On Sun, Feb 07, 2021 at 03:13:20PM +0000, Phillip Potter wrote:
> > Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
> > to strscpy calls. As return values were not checked for these three
> > calls before, change should be safe as functionality is equivalent.
> > 
> > Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> > ---
> > 
> > v2: Modified changelog to take account of feedback from Greg KH.
> > 
> >  drivers/staging/octeon/ethernet-mdio.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
> > index b0fd083a5bf2..b3049108edc4 100644
> > --- a/drivers/staging/octeon/ethernet-mdio.c
> > +++ b/drivers/staging/octeon/ethernet-mdio.c
> > @@ -21,9 +21,9 @@
> >  static void cvm_oct_get_drvinfo(struct net_device *dev,
> >  				struct ethtool_drvinfo *info)
> >  {
> > -	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> > -	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
> > -	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
> > +	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> > +	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
> > +	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
> >  }
> >  
> >  static int cvm_oct_nway_reset(struct net_device *dev)
> 
> Sorry, this does not apply to my tree, someone already did this
> conversion before you :(
> 
> greg k-h

Thank you anyway, and thank you to you and Joe for your feedback, much
appreciated.

Regards,
Phil

Re: [PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Phillip Potter]

On Sun, Feb 07, 2021 at 04:35:06PM +0100, Greg KH wrote:
> On Sun, Feb 07, 2021 at 03:13:20PM +0000, Phillip Potter wrote:
> > Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
> > to strscpy calls. As return values were not checked for these three
> > calls before, change should be safe as functionality is equivalent.
> > 
> > Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> > ---
> > 
> > v2: Modified changelog to take account of feedback from Greg KH.
> > 
> >  drivers/staging/octeon/ethernet-mdio.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
> > index b0fd083a5bf2..b3049108edc4 100644
> > --- a/drivers/staging/octeon/ethernet-mdio.c
> > +++ b/drivers/staging/octeon/ethernet-mdio.c
> > @@ -21,9 +21,9 @@
> >  static void cvm_oct_get_drvinfo(struct net_device *dev,
> >  				struct ethtool_drvinfo *info)
> >  {
> > -	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> > -	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
> > -	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
> > +	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> > +	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
> > +	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
> >  }
> >  
> >  static int cvm_oct_nway_reset(struct net_device *dev)
> 
> Sorry, this does not apply to my tree, someone already did this
> conversion before you :(
> 
> greg k-h

Thank you anyway, and thank you to you and Joe for your feedback, much
appreciated.

Regards,
Phil
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Greg KH]

On Sun, Feb 07, 2021 at 03:03:02PM +0000, Phillip Potter wrote:
> Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
> to strscpy calls. As return values were not checked for these three
> calls before, change should be safe as functionality is equivalent.
> 
> Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> ---
>  drivers/staging/octeon/ethernet-mdio.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
> index b0fd083a5bf2..b3049108edc4 100644
> --- a/drivers/staging/octeon/ethernet-mdio.c
> +++ b/drivers/staging/octeon/ethernet-mdio.c
> @@ -21,9 +21,9 @@
>  static void cvm_oct_get_drvinfo(struct net_device *dev,
>  				struct ethtool_drvinfo *info)
>  {
> -	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> -	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
> -	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
> +	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> +	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
> +	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
>  }
>  
>  static int cvm_oct_nway_reset(struct net_device *dev)
> -- 
> 2.29.2


Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- This looks like a new version of a previously submitted patch, but you
  did not list below the --- line any changes from the previous version.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/SubmittingPatches for what needs to be done
  here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

Re: [PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Greg KH]

On Sun, Feb 07, 2021 at 03:03:02PM +0000, Phillip Potter wrote:
> Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
> to strscpy calls. As return values were not checked for these three
> calls before, change should be safe as functionality is equivalent.
> 
> Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> ---
>  drivers/staging/octeon/ethernet-mdio.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
> index b0fd083a5bf2..b3049108edc4 100644
> --- a/drivers/staging/octeon/ethernet-mdio.c
> +++ b/drivers/staging/octeon/ethernet-mdio.c
> @@ -21,9 +21,9 @@
>  static void cvm_oct_get_drvinfo(struct net_device *dev,
>  				struct ethtool_drvinfo *info)
>  {
> -	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> -	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
> -	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
> +	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
> +	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
> +	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
>  }
>  
>  static int cvm_oct_nway_reset(struct net_device *dev)
> -- 
> 2.29.2


Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- This looks like a new version of a previously submitted patch, but you
  did not list below the --- line any changes from the previous version.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/SubmittingPatches for what needs to be done
  here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Phillip Potter]

Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
to strscpy calls. As return values were not checked for these three
calls before, change should be safe as functionality is equivalent.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---
 drivers/staging/octeon/ethernet-mdio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index b0fd083a5bf2..b3049108edc4 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -21,9 +21,9 @@
 static void cvm_oct_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
-	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
-	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
-	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
+	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
+	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
 }
 
 static int cvm_oct_nway_reset(struct net_device *dev)
-- 
2.29.2

[PATCH v2] staging: octeon: convert all uses of strlcpy to strscpy in ethernet-mdio.c

[Phillip Potter]

Convert three calls to strlcpy inside the cvm_oct_get_drvinfo function
to strscpy calls. As return values were not checked for these three
calls before, change should be safe as functionality is equivalent.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---
 drivers/staging/octeon/ethernet-mdio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index b0fd083a5bf2..b3049108edc4 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -21,9 +21,9 @@
 static void cvm_oct_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
-	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
-	strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
-	strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
+	strscpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
+	strscpy(info->version, UTS_RELEASE, sizeof(info->version));
+	strscpy(info->bus_info, "Builtin", sizeof(info->bus_info));
 }
 
 static int cvm_oct_nway_reset(struct net_device *dev)
-- 
2.29.2

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel