* FAILED: patch "[PATCH] usb: dwc3: ulpi: Replace CPU-based busyloop with" failed to apply to 4.4-stable tree
@ 2021-01-11 8:36 gregkh
2021-02-13 0:04 ` Sudip Mukherjee
0 siblings, 1 reply; 3+ messages in thread
From: gregkh @ 2021-01-11 8:36 UTC (permalink / raw)
To: Sergey.Semin, gregkh, heikki.krogerus, stable; +Cc: stable
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From fca3f138105727c3a22edda32d02f91ce1bf11c9 Mon Sep 17 00:00:00 2001
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Date: Thu, 10 Dec 2020 11:50:07 +0300
Subject: [PATCH] usb: dwc3: ulpi: Replace CPU-based busyloop with
Protocol-based one
Originally the procedure of the ULPI transaction finish detection has been
developed as a simple busy-loop with just decrementing counter and no
delays. It's wrong since on different systems the loop will take a
different time to complete. So if the system bus and CPU are fast enough
to overtake the ULPI bus and the companion PHY reaction, then we'll get to
take a false timeout error. Fix this by converting the busy-loop procedure
to take the standard bus speed, address value and the registers access
mode into account for the busy-loop delay calculation.
Here is the way the fix works. It's known that the ULPI bus is clocked
with 60MHz signal. In accordance with [1] the ULPI bus protocol is created
so to spend 5 and 6 clock periods for immediate register write and read
operations respectively, and 6 and 7 clock periods - for the extended
register writes and reads. Based on that we can easily pre-calculate the
time which will be needed for the controller to perform a requested IO
operation. Note we'll still preserve the attempts counter in case if the
DWC USB3 controller has got some internals delays.
[1] UTMI+ Low Pin Interface (ULPI) Specification, Revision 1.1,
October 20, 2004, pp. 30 - 36.
Fixes: 88bc9d194ff6 ("usb: dwc3: add ULPI interface support")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201210085008.13264-3-Sergey.Semin@baikalelectronics.ru
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
index 3cc4f4970c05..54c877f7b51d 100644
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -7,6 +7,8 @@
* Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
*/
+#include <linux/delay.h>
+#include <linux/time64.h>
#include <linux/ulpi/regs.h>
#include "core.h"
@@ -17,12 +19,22 @@
DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \
DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a))
-static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
+#define DWC3_ULPI_BASE_DELAY DIV_ROUND_UP(NSEC_PER_SEC, 60000000L)
+
+static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read)
{
+ unsigned long ns = 5L * DWC3_ULPI_BASE_DELAY;
unsigned int count = 1000;
u32 reg;
+ if (addr >= ULPI_EXT_VENDOR_SPECIFIC)
+ ns += DWC3_ULPI_BASE_DELAY;
+
+ if (read)
+ ns += DWC3_ULPI_BASE_DELAY;
+
while (count--) {
+ ndelay(ns);
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
if (reg & DWC3_GUSB2PHYACC_DONE)
return 0;
@@ -47,7 +59,7 @@ static int dwc3_ulpi_read(struct device *dev, u8 addr)
reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
- ret = dwc3_ulpi_busyloop(dwc);
+ ret = dwc3_ulpi_busyloop(dwc, addr, true);
if (ret)
return ret;
@@ -71,7 +83,7 @@ static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val)
reg |= DWC3_GUSB2PHYACC_WRITE | val;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
- return dwc3_ulpi_busyloop(dwc);
+ return dwc3_ulpi_busyloop(dwc, addr, false);
}
static const struct ulpi_ops dwc3_ulpi_ops = {
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: FAILED: patch "[PATCH] usb: dwc3: ulpi: Replace CPU-based busyloop with" failed to apply to 4.4-stable tree
2021-01-11 8:36 FAILED: patch "[PATCH] usb: dwc3: ulpi: Replace CPU-based busyloop with" failed to apply to 4.4-stable tree gregkh
@ 2021-02-13 0:04 ` Sudip Mukherjee
2021-02-15 14:29 ` Greg KH
0 siblings, 1 reply; 3+ messages in thread
From: Sudip Mukherjee @ 2021-02-13 0:04 UTC (permalink / raw)
To: gregkh; +Cc: Sergey.Semin, heikki.krogerus, stable
[-- Attachment #1: Type: text/plain, Size: 465 bytes --]
Hi Greg,
On Mon, Jan 11, 2021 at 09:36:58AM +0100, gregkh@linuxfoundation.org wrote:
>
> The patch below does not apply to the 4.4-stable tree.
> If someone wants it applied there, or to any other stable or longterm
> tree, then please email the backport, including the original git commit
> id to <stable@vger.kernel.org>.
Here is the backport, along with 2a499b452952 ("usb: dwc3: ulpi: fix checkpatch warning")
which makes backporting easy.
--
Regards
Sudip
[-- Attachment #2: 0001-usb-dwc3-ulpi-fix-checkpatch-warning.patch --]
[-- Type: text/x-diff, Size: 816 bytes --]
From 3445398b1ddd749dbf1fc3cac2eaad781aafea53 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@kernel.org>
Date: Thu, 13 Aug 2020 08:30:38 +0300
Subject: [PATCH 1/2] usb: dwc3: ulpi: fix checkpatch warning
commit 2a499b45295206e7f3dc76edadde891c06cc4447 upstream
no functional changes.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
drivers/usb/dwc3/ulpi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
index ec004c6d76f2..1f8f6163d47d 100644
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -22,7 +22,7 @@
static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
{
- unsigned count = 1000;
+ unsigned int count = 1000;
u32 reg;
while (count--) {
--
2.30.0
[-- Attachment #3: 0002-usb-dwc3-ulpi-Replace-CPU-based-busyloop-with-Protoc.patch --]
[-- Type: text/x-diff, Size: 3718 bytes --]
From 8157753de640fabd49e0f13764b2f663542f1a4a Mon Sep 17 00:00:00 2001
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Date: Thu, 10 Dec 2020 11:50:07 +0300
Subject: [PATCH 2/2] usb: dwc3: ulpi: Replace CPU-based busyloop with
Protocol-based one
commit fca3f138105727c3a22edda32d02f91ce1bf11c9 upstream
Originally the procedure of the ULPI transaction finish detection has been
developed as a simple busy-loop with just decrementing counter and no
delays. It's wrong since on different systems the loop will take a
different time to complete. So if the system bus and CPU are fast enough
to overtake the ULPI bus and the companion PHY reaction, then we'll get to
take a false timeout error. Fix this by converting the busy-loop procedure
to take the standard bus speed, address value and the registers access
mode into account for the busy-loop delay calculation.
Here is the way the fix works. It's known that the ULPI bus is clocked
with 60MHz signal. In accordance with [1] the ULPI bus protocol is created
so to spend 5 and 6 clock periods for immediate register write and read
operations respectively, and 6 and 7 clock periods - for the extended
register writes and reads. Based on that we can easily pre-calculate the
time which will be needed for the controller to perform a requested IO
operation. Note we'll still preserve the attempts counter in case if the
DWC USB3 controller has got some internals delays.
[1] UTMI+ Low Pin Interface (ULPI) Specification, Revision 1.1,
October 20, 2004, pp. 30 - 36.
Fixes: 88bc9d194ff6 ("usb: dwc3: add ULPI interface support")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201210085008.13264-3-Sergey.Semin@baikalelectronics.ru
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
drivers/usb/dwc3/ulpi.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
index 1f8f6163d47d..44f1a496633c 100644
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
+#include <linux/time64.h>
#include <linux/ulpi/regs.h>
#include "core.h"
@@ -20,12 +22,22 @@
DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \
DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a))
-static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
+#define DWC3_ULPI_BASE_DELAY DIV_ROUND_UP(NSEC_PER_SEC, 60000000L)
+
+static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read)
{
+ unsigned long ns = 5L * DWC3_ULPI_BASE_DELAY;
unsigned int count = 1000;
u32 reg;
+ if (addr >= ULPI_EXT_VENDOR_SPECIFIC)
+ ns += DWC3_ULPI_BASE_DELAY;
+
+ if (read)
+ ns += DWC3_ULPI_BASE_DELAY;
+
while (count--) {
+ ndelay(ns);
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
if (!(reg & DWC3_GUSB2PHYACC_BUSY))
return 0;
@@ -44,7 +56,7 @@ static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr)
reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
- ret = dwc3_ulpi_busyloop(dwc);
+ ret = dwc3_ulpi_busyloop(dwc, addr, true);
if (ret)
return ret;
@@ -62,7 +74,7 @@ static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val)
reg |= DWC3_GUSB2PHYACC_WRITE | val;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
- return dwc3_ulpi_busyloop(dwc);
+ return dwc3_ulpi_busyloop(dwc, addr, false);
}
static struct ulpi_ops dwc3_ulpi_ops = {
--
2.30.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: FAILED: patch "[PATCH] usb: dwc3: ulpi: Replace CPU-based busyloop with" failed to apply to 4.4-stable tree
2021-02-13 0:04 ` Sudip Mukherjee
@ 2021-02-15 14:29 ` Greg KH
0 siblings, 0 replies; 3+ messages in thread
From: Greg KH @ 2021-02-15 14:29 UTC (permalink / raw)
To: Sudip Mukherjee; +Cc: Sergey.Semin, heikki.krogerus, stable
On Sat, Feb 13, 2021 at 12:04:26AM +0000, Sudip Mukherjee wrote:
> Hi Greg,
>
> On Mon, Jan 11, 2021 at 09:36:58AM +0100, gregkh@linuxfoundation.org wrote:
> >
> > The patch below does not apply to the 4.4-stable tree.
> > If someone wants it applied there, or to any other stable or longterm
> > tree, then please email the backport, including the original git commit
> > id to <stable@vger.kernel.org>.
>
> Here is the backport, along with 2a499b452952 ("usb: dwc3: ulpi: fix checkpatch warning")
> which makes backporting easy.
Thanks for all of these, now queued up.
greg k-h
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-02-15 14:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-11 8:36 FAILED: patch "[PATCH] usb: dwc3: ulpi: Replace CPU-based busyloop with" failed to apply to 4.4-stable tree gregkh
2021-02-13 0:04 ` Sudip Mukherjee
2021-02-15 14:29 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.