All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Souradeep Chowdhury <schowdhu@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, sibis@codeaurora.org,
	saiprakash.ranjan@codeaurora.org,
	Rajendra Nayak <rnayak@codeaurora.org>,
	vkoul@kernel.org
Subject: Re: [PATCH V1 1/6] dt-bindings: Added the yaml bindings for DCC
Date: Wed, 10 Mar 2021 14:22:44 -0600	[thread overview]
Message-ID: <YEkqlIuphaEe3+8h@builder.lan> (raw)
In-Reply-To: <e33318b1b216bb0cb0a854e8d9cdd18dd5faca97.1615393454.git.schowdhu@codeaurora.org>

On Wed 10 Mar 10:46 CST 2021, Souradeep Chowdhury wrote:

> Documentation for Data Capture and Compare(DCC) device tree bindings
> in yaml format.
> 
> Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
> ---
>  .../devicetree/bindings/arm/msm/qcom,dcc.yaml      | 49 ++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml
> new file mode 100644
> index 0000000..b8e9998
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/msm/qcom,dcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Data Capture and Compare
> +
> +maintainers:
> +  - Souradeep Chowdhury <schowdhu@codeaurora.org>
> +
> +description: |
> +    DCC (Data Capture and Compare) is a DMA engine which is used to save
> +    configuration data or system memory contents during catastrophic failure
> +    or SW trigger. DCC is used to capture and store data for debugging purpose
> +
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,sm8150-dcc
> +      - const: qcom,dcc
> +
> +  reg:
> +    items:
> +      - description: DCC base register region
> +      - description: DCC RAM base register region
> +
> +  reg-names:
> +    items:
> +      - const: dcc-base
> +      - const: dcc-ram-base

Please omit the "-base" suffix from the reg-names.

Regards,
Bjorn

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    dcc@10a2000{
> +                compatible = "qcom,sm8150-dcc","qcom,dcc";
> +                reg = <0x010a2000  0x1000>,
> +                      <0x010ad000  0x2000>;
> +                reg-names = "dcc-base", "dcc-ram-base";
> +    };
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Souradeep Chowdhury <schowdhu@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, sibis@codeaurora.org,
	saiprakash.ranjan@codeaurora.org,
	Rajendra Nayak <rnayak@codeaurora.org>,
	vkoul@kernel.org
Subject: Re: [PATCH V1 1/6] dt-bindings: Added the yaml bindings for DCC
Date: Wed, 10 Mar 2021 14:22:44 -0600	[thread overview]
Message-ID: <YEkqlIuphaEe3+8h@builder.lan> (raw)
In-Reply-To: <e33318b1b216bb0cb0a854e8d9cdd18dd5faca97.1615393454.git.schowdhu@codeaurora.org>

On Wed 10 Mar 10:46 CST 2021, Souradeep Chowdhury wrote:

> Documentation for Data Capture and Compare(DCC) device tree bindings
> in yaml format.
> 
> Signed-off-by: Souradeep Chowdhury <schowdhu@codeaurora.org>
> ---
>  .../devicetree/bindings/arm/msm/qcom,dcc.yaml      | 49 ++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml
> new file mode 100644
> index 0000000..b8e9998
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,dcc.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/msm/qcom,dcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Data Capture and Compare
> +
> +maintainers:
> +  - Souradeep Chowdhury <schowdhu@codeaurora.org>
> +
> +description: |
> +    DCC (Data Capture and Compare) is a DMA engine which is used to save
> +    configuration data or system memory contents during catastrophic failure
> +    or SW trigger. DCC is used to capture and store data for debugging purpose
> +
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,sm8150-dcc
> +      - const: qcom,dcc
> +
> +  reg:
> +    items:
> +      - description: DCC base register region
> +      - description: DCC RAM base register region
> +
> +  reg-names:
> +    items:
> +      - const: dcc-base
> +      - const: dcc-ram-base

Please omit the "-base" suffix from the reg-names.

Regards,
Bjorn

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    dcc@10a2000{
> +                compatible = "qcom,sm8150-dcc","qcom,dcc";
> +                reg = <0x010a2000  0x1000>,
> +                      <0x010ad000  0x2000>;
> +                reg-names = "dcc-base", "dcc-ram-base";
> +    };
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-03-10 20:23 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10 16:46 [PATCH V1 0/6] Add driver support for Data Capture and Compare Engine(DCC) for SM8150 Souradeep Chowdhury
2021-03-10 16:46 ` [PATCH V1 1/6] dt-bindings: Added the yaml bindings for DCC Souradeep Chowdhury
2021-03-10 20:22   ` Bjorn Andersson [this message]
2021-03-10 20:22     ` Bjorn Andersson
2021-03-10 16:46 ` [PATCH V1 2/6] soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC) Souradeep Chowdhury
2021-03-10 23:19   ` Bjorn Andersson
2021-03-10 23:19     ` Bjorn Andersson
2021-03-11  6:19     ` Sai Prakash Ranjan
2021-03-11 16:31       ` Bjorn Andersson
2021-03-11 16:31         ` Bjorn Andersson
2021-03-14 18:59         ` Sai Prakash Ranjan
2021-03-11 10:06     ` schowdhu
2021-03-11 16:34       ` Bjorn Andersson
2021-03-11 16:34         ` Bjorn Andersson
2021-03-14 19:19         ` Sai Prakash Ranjan
2021-03-10 16:46 ` [PATCH V1 3/6] soc: qcom: dcc: Add the sysfs variables to the Data Capture and Compare driver(DCC) Souradeep Chowdhury
2021-03-10 16:46 ` [PATCH V1 4/6] DCC: Added the sysfs entries for DCC(Data Capture and Compare) driver Souradeep Chowdhury
2021-03-10 23:28   ` Bjorn Andersson
2021-03-10 23:28     ` Bjorn Andersson
2021-03-11 10:45     ` schowdhu
2021-03-10 16:46 ` [PATCH V1 5/6] MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver support Souradeep Chowdhury
2021-03-10 16:46 ` [PATCH V1 6/6] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node Souradeep Chowdhury

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YEkqlIuphaEe3+8h@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=saiprakash.ranjan@codeaurora.org \
    --cc=schowdhu@codeaurora.org \
    --cc=sibis@codeaurora.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.