* [PATCH] selftests/resctrl: Change a few printed messages
@ 2021-04-06 0:52 Fenghua Yu
2021-04-07 14:33 ` Shuah Khan
0 siblings, 1 reply; 4+ messages in thread
From: Fenghua Yu @ 2021-04-06 0:52 UTC (permalink / raw)
To: Shuah Khan, Ravi V Shankar; +Cc: linux-kselftest, linux-kernel, Fenghua Yu
A few printed messages contain pass/fail strings which should be shown
in test results. Remove the pass/fail strings in the messages to avoid
confusion.
Add "\n" at the end of one printed message.
Suggested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
This is a follow-up patch of recent resctrl selftest patches and can be
applied cleanly to:
git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
branch next.
tools/testing/selftests/resctrl/cache.c | 3 +--
tools/testing/selftests/resctrl/mba_test.c | 9 +++------
tools/testing/selftests/resctrl/mbm_test.c | 3 +--
tools/testing/selftests/resctrl/resctrlfs.c | 7 ++-----
4 files changed, 7 insertions(+), 15 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c
index 362e3a418caa..310bbc997c60 100644
--- a/tools/testing/selftests/resctrl/cache.c
+++ b/tools/testing/selftests/resctrl/cache.c
@@ -301,8 +301,7 @@ int show_cache_info(unsigned long sum_llc_val, int no_of_bits,
ret = platform && abs((int)diff_percent) > max_diff_percent &&
(cmt ? (abs(avg_diff) > max_diff) : true);
- ksft_print_msg("%s cache miss rate within %d%%\n",
- ret ? "Fail:" : "Pass:", max_diff_percent);
+ ksft_print_msg("Check cache miss rate within %d%%\n", max_diff_percent);
ksft_print_msg("Percent diff=%d\n", abs((int)diff_percent));
ksft_print_msg("Number of bits: %d\n", no_of_bits);
diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c
index 26f12ad4c663..a909a745754f 100644
--- a/tools/testing/selftests/resctrl/mba_test.c
+++ b/tools/testing/selftests/resctrl/mba_test.c
@@ -80,9 +80,7 @@ static void show_mba_info(unsigned long *bw_imc, unsigned long *bw_resc)
avg_diff = (float)labs(avg_bw_resc - avg_bw_imc) / avg_bw_imc;
avg_diff_per = (int)(avg_diff * 100);
- ksft_print_msg("%s MBA: diff within %d%% for schemata %u\n",
- avg_diff_per > MAX_DIFF_PERCENT ?
- "Fail:" : "Pass:",
+ ksft_print_msg("Check MBA diff within %d%% for schemata %u\n",
MAX_DIFF_PERCENT,
ALLOCATION_MAX - ALLOCATION_STEP * allocation);
@@ -93,10 +91,9 @@ static void show_mba_info(unsigned long *bw_imc, unsigned long *bw_resc)
failed = true;
}
- ksft_print_msg("%s schemata change using MBA\n",
- failed ? "Fail:" : "Pass:");
+ ksft_print_msg("Check schemata change using MBA\n");
if (failed)
- ksft_print_msg("At least one test failed");
+ ksft_print_msg("At least one test failed\n");
}
static int check_results(void)
diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
index 02b1ed03f1e5..e2e7ee4ec630 100644
--- a/tools/testing/selftests/resctrl/mbm_test.c
+++ b/tools/testing/selftests/resctrl/mbm_test.c
@@ -37,8 +37,7 @@ show_bw_info(unsigned long *bw_imc, unsigned long *bw_resc, int span)
avg_diff_per = (int)(avg_diff * 100);
ret = avg_diff_per > MAX_DIFF_PERCENT;
- ksft_print_msg("%s MBM: diff within %d%%\n",
- ret ? "Fail:" : "Pass:", MAX_DIFF_PERCENT);
+ ksft_print_msg("Check MBM diff within %d%%\n", MAX_DIFF_PERCENT);
ksft_print_msg("avg_diff_per: %d%%\n", avg_diff_per);
ksft_print_msg("Span (MB): %d\n", span);
ksft_print_msg("avg_bw_imc: %lu\n", avg_bw_imc);
diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c
index ade5f2b8b843..91cb3c48a7da 100644
--- a/tools/testing/selftests/resctrl/resctrlfs.c
+++ b/tools/testing/selftests/resctrl/resctrlfs.c
@@ -570,15 +570,12 @@ bool check_resctrlfs_support(void)
fclose(inf);
- ksft_print_msg("%s kernel supports resctrl filesystem\n",
- ret ? "Pass:" : "Fail:");
-
+ ksft_print_msg("Check kernel support for resctrl filesystem\n");
if (!ret)
return ret;
dp = opendir(RESCTRL_PATH);
- ksft_print_msg("%s resctrl mountpoint \"%s\" exists\n",
- dp ? "Pass:" : "Fail:", RESCTRL_PATH);
+ ksft_print_msg("Check resctrl mountpoint \"%s\"\n", RESCTRL_PATH);
if (dp)
closedir(dp);
--
2.31.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] selftests/resctrl: Change a few printed messages
2021-04-06 0:52 [PATCH] selftests/resctrl: Change a few printed messages Fenghua Yu
@ 2021-04-07 14:33 ` Shuah Khan
2021-04-07 17:12 ` Fenghua Yu
0 siblings, 1 reply; 4+ messages in thread
From: Shuah Khan @ 2021-04-07 14:33 UTC (permalink / raw)
To: Fenghua Yu, Shuah Khan, Ravi V Shankar
Cc: linux-kselftest, linux-kernel, Shuah Khan
On 4/5/21 6:52 PM, Fenghua Yu wrote:
> A few printed messages contain pass/fail strings which should be shown
> in test results. Remove the pass/fail strings in the messages to avoid
> confusion.
>
> Add "\n" at the end of one printed message.
>
> Suggested-by: Shuah Khan <shuah@kernel.org>
> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
> ---
> This is a follow-up patch of recent resctrl selftest patches and can be
> applied cleanly to:
> git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
> branch next.
>
> tools/testing/selftests/resctrl/cache.c | 3 +--
> tools/testing/selftests/resctrl/mba_test.c | 9 +++------
> tools/testing/selftests/resctrl/mbm_test.c | 3 +--
> tools/testing/selftests/resctrl/resctrlfs.c | 7 ++-----
> 4 files changed, 7 insertions(+), 15 deletions(-)
>
> diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c
> index 362e3a418caa..310bbc997c60 100644
> --- a/tools/testing/selftests/resctrl/cache.c
> +++ b/tools/testing/selftests/resctrl/cache.c
> @@ -301,8 +301,7 @@ int show_cache_info(unsigned long sum_llc_val, int no_of_bits,
> ret = platform && abs((int)diff_percent) > max_diff_percent &&
> (cmt ? (abs(avg_diff) > max_diff) : true);
>
> - ksft_print_msg("%s cache miss rate within %d%%\n",
> - ret ? "Fail:" : "Pass:", max_diff_percent);
> + ksft_print_msg("Check cache miss rate within %d%%\n", max_diff_percent);
You need %s and pass in the ret ? "Fail:" : "Pass:" result for the
message to read correctly.
I am seeing:
# Check kernel support for resctrl filesystem
It should say the following:
# Fail Check kernel support for resctrl filesystem
Same for other such messages.
>
> ksft_print_msg("Percent diff=%d\n", abs((int)diff_percent));
> ksft_print_msg("Number of bits: %d\n", no_of_bits);
> diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c
> index 26f12ad4c663..a909a745754f 100644
> --- a/tools/testing/selftests/resctrl/mba_test.c
> +++ b/tools/testing/selftests/resctrl/mba_test.c
> @@ -80,9 +80,7 @@ static void show_mba_info(unsigned long *bw_imc, unsigned long *bw_resc)
> avg_diff = (float)labs(avg_bw_resc - avg_bw_imc) / avg_bw_imc;
> avg_diff_per = (int)(avg_diff * 100);
>
> - ksft_print_msg("%s MBA: diff within %d%% for schemata %u\n",
> - avg_diff_per > MAX_DIFF_PERCENT ?
> - "Fail:" : "Pass:",
> + ksft_print_msg("Check MBA diff within %d%% for schemata %u\n",
> MAX_DIFF_PERCENT,
> ALLOCATION_MAX - ALLOCATION_STEP * allocation);
>
> @@ -93,10 +91,9 @@ static void show_mba_info(unsigned long *bw_imc, unsigned long *bw_resc)
> failed = true;
> }
>
> - ksft_print_msg("%s schemata change using MBA\n",
> - failed ? "Fail:" : "Pass:");
> + ksft_print_msg("Check schemata change using MBA\n");
> if (failed)
> - ksft_print_msg("At least one test failed");
> + ksft_print_msg("At least one test failed\n");
> }
>
> static int check_results(void)
> diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
> index 02b1ed03f1e5..e2e7ee4ec630 100644
> --- a/tools/testing/selftests/resctrl/mbm_test.c
> +++ b/tools/testing/selftests/resctrl/mbm_test.c
> @@ -37,8 +37,7 @@ show_bw_info(unsigned long *bw_imc, unsigned long *bw_resc, int span)
> avg_diff_per = (int)(avg_diff * 100);
>
> ret = avg_diff_per > MAX_DIFF_PERCENT;
> - ksft_print_msg("%s MBM: diff within %d%%\n",
> - ret ? "Fail:" : "Pass:", MAX_DIFF_PERCENT);
> + ksft_print_msg("Check MBM diff within %d%%\n", MAX_DIFF_PERCENT);
Here
> ksft_print_msg("avg_diff_per: %d%%\n", avg_diff_per);
> ksft_print_msg("Span (MB): %d\n", span);
> ksft_print_msg("avg_bw_imc: %lu\n", avg_bw_imc);
> diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c
> index ade5f2b8b843..91cb3c48a7da 100644
> --- a/tools/testing/selftests/resctrl/resctrlfs.c
> +++ b/tools/testing/selftests/resctrl/resctrlfs.c
> @@ -570,15 +570,12 @@ bool check_resctrlfs_support(void)
>
> fclose(inf);
>
> - ksft_print_msg("%s kernel supports resctrl filesystem\n",
> - ret ? "Pass:" : "Fail:");
> -
> + ksft_print_msg("Check kernel support for resctrl filesystem\n");
Here
> if (!ret)
> return ret;
>
> dp = opendir(RESCTRL_PATH);
> - ksft_print_msg("%s resctrl mountpoint \"%s\" exists\n",
> - dp ? "Pass:" : "Fail:", RESCTRL_PATH);
> + ksft_print_msg("Check resctrl mountpoint \"%s\"\n", RESCTRL_PATH);
Here
> if (dp)
> closedir(dp);
>
>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] selftests/resctrl: Change a few printed messages
2021-04-07 14:33 ` Shuah Khan
@ 2021-04-07 17:12 ` Fenghua Yu
2021-04-07 18:15 ` Shuah Khan
0 siblings, 1 reply; 4+ messages in thread
From: Fenghua Yu @ 2021-04-07 17:12 UTC (permalink / raw)
To: Shuah Khan; +Cc: Shuah Khan, Ravi V Shankar, linux-kselftest, linux-kernel
Hi, Shuah,
On Wed, Apr 07, 2021 at 08:33:23AM -0600, Shuah Khan wrote:
> On 4/5/21 6:52 PM, Fenghua Yu wrote:
> > - ksft_print_msg("%s cache miss rate within %d%%\n",
> > - ret ? "Fail:" : "Pass:", max_diff_percent);
> > + ksft_print_msg("Check cache miss rate within %d%%\n", max_diff_percent);
>
> You need %s and pass in the ret ? "Fail:" : "Pass:" result for the
> message to read correctly.
Should I keep the ":" after "Pass"/"Fail"?
>
> I am seeing:
>
> # Check kernel support for resctrl filesystem
>
> It should say the following:
>
> # Fail Check kernel support for resctrl filesystem
i.e. should the printed messages be like the following?
# Fail: Check kernel support for resctrl filesystem
or
# Pass: Check kernel support for resctrl filesystem
Thanks.
-Fenghua
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] selftests/resctrl: Change a few printed messages
2021-04-07 17:12 ` Fenghua Yu
@ 2021-04-07 18:15 ` Shuah Khan
0 siblings, 0 replies; 4+ messages in thread
From: Shuah Khan @ 2021-04-07 18:15 UTC (permalink / raw)
To: Fenghua Yu
Cc: Shuah Khan, Ravi V Shankar, linux-kselftest, linux-kernel, Shuah Khan
On 4/7/21 11:12 AM, Fenghua Yu wrote:
> Hi, Shuah,
>
> On Wed, Apr 07, 2021 at 08:33:23AM -0600, Shuah Khan wrote:
>> On 4/5/21 6:52 PM, Fenghua Yu wrote:
>>> - ksft_print_msg("%s cache miss rate within %d%%\n",
>>> - ret ? "Fail:" : "Pass:", max_diff_percent);
>>> + ksft_print_msg("Check cache miss rate within %d%%\n", max_diff_percent);
>>
>> You need %s and pass in the ret ? "Fail:" : "Pass:" result for the
>> message to read correctly.
>
> Should I keep the ":" after "Pass"/"Fail"?
>
Yes please.
>>
>> I am seeing:
>>
>> # Check kernel support for resctrl filesystem
>>
>> It should say the following:
>>
>> # Fail Check kernel support for resctrl filesystem
>
> i.e. should the printed messages be like the following?
> # Fail: Check kernel support for resctrl filesystem
> or
> # Pass: Check kernel support for resctrl filesystem
>
This looks good.
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-04-07 18:15 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-06 0:52 [PATCH] selftests/resctrl: Change a few printed messages Fenghua Yu
2021-04-07 14:33 ` Shuah Khan
2021-04-07 17:12 ` Fenghua Yu
2021-04-07 18:15 ` Shuah Khan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.